P4080/eLBC: Make Freescale elbc interrupt common to elbc devices

Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 631e5a0..44df1ba 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -687,9 +687,12 @@
 	bool
 
 config FSL_LBC
-	bool
+	bool "Freescale Local Bus support"
+	depends on FSL_SOC
 	help
-	  Freescale Localbus support
+	  Enables reporting of errors from the Freescale local bus
+	  controller.  Also contains some common code used by
+	  drivers for specific local bus peripherals.
 
 config FSL_GTM
 	bool
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 1b5a210..06a1112 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -1,9 +1,10 @@
 /* Freescale Local Bus Controller
  *
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
  *
  * Authors: Nick Spence <nick.spence@freescale.com>,
  *          Scott Wood <scottwood@freescale.com>
+ *          Jack Lan <jack.lan@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,6 +27,8 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/io.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
 
 struct fsl_lbc_bank {
 	__be32 br;             /**< Base Register  */
@@ -125,13 +128,23 @@
 #define LTESR_ATMW 0x00800000
 #define LTESR_ATMR 0x00400000
 #define LTESR_CS   0x00080000
+#define LTESR_UPM  0x00000002
 #define LTESR_CC   0x00000001
 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+#define LTESR_MASK      (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \
+			 | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \
+			 | LTESR_CC)
+#define LTESR_CLEAR	0xFFFFFFFF
+#define LTECCR_CLEAR	0xFFFFFFFF
+#define LTESR_STATUS	LTESR_MASK
+#define LTEIR_ENABLE	LTESR_MASK
+#define LTEDR_ENABLE	0x00000000
 	__be32 ltedr;           /**< Transfer Error Disable Register */
 	__be32 lteir;           /**< Transfer Error Interrupt Register */
 	__be32 lteatr;          /**< Transfer Error Attributes Register */
 	__be32 ltear;           /**< Transfer Error Address Register */
-	u8 res6[0xC];
+	__be32 lteccr;          /**< Transfer Error ECC Register */
+	u8 res6[0x8];
 	__be32 lbcr;            /**< Configuration Register */
 #define LBCR_LDIS  0x80000000
 #define LBCR_LDIS_SHIFT    31
@@ -265,7 +278,23 @@
 		cpu_relax();
 }
 
+/* overview of the fsl lbc controller */
+
+struct fsl_lbc_ctrl {
+	/* device info */
+	struct device			*dev;
+	struct fsl_lbc_regs __iomem	*regs;
+	int				irq;
+	wait_queue_head_t		irq_wait;
+	spinlock_t			lock;
+	void				*nand;
+
+	/* status read from LTESR by irq handler */
+	unsigned int			irq_status;
+};
+
 extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
 			       u32 mar);
+extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
 
 #endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index dceb8d1..91c9c53 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -1,9 +1,12 @@
 /*
  * Freescale LBC and UPM routines.
  *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ * Copyright © 2007-2008  MontaVista Software, Inc.
+ * Copyright © 2010 Freescale Semiconductor
  *
  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Author: Jack Lan <Jack.Lan@freescale.com>
+ * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,39 +22,16 @@
 #include <linux/types.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <asm/prom.h>
 #include <asm/fsl_lbc.h>
 
 static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-
-static char __initdata *compat_lbc[] = {
-	"fsl,pq2-localbus",
-	"fsl,pq2pro-localbus",
-	"fsl,pq3-localbus",
-	"fsl,elbc",
-};
-
-static int __init fsl_lbc_init(void)
-{
-	struct device_node *lbus;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
-		lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
-		if (lbus)
-			goto found;
-	}
-	return -ENODEV;
-
-found:
-	fsl_lbc_regs = of_iomap(lbus, 0);
-	of_node_put(lbus);
-	if (!fsl_lbc_regs)
-		return -ENOMEM;
-	return 0;
-}
-arch_initcall(fsl_lbc_init);
+struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
+EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
 
 /**
  * fsl_lbc_find - find Localbus bank
@@ -65,13 +45,15 @@
 int fsl_lbc_find(phys_addr_t addr_base)
 {
 	int i;
+	struct fsl_lbc_regs __iomem *lbc;
 
-	if (!fsl_lbc_regs)
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
 		return -ENODEV;
 
-	for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
-		__be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
-		__be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+	lbc = fsl_lbc_ctrl_dev->regs;
+	for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) {
+		__be32 br = in_be32(&lbc->bank[i].br);
+		__be32 or = in_be32(&lbc->bank[i].or);
 
 		if (br & BR_V && (br & or & BR_BA) == addr_base)
 			return i;
@@ -94,22 +76,27 @@
 {
 	int bank;
 	__be32 br;
+	struct fsl_lbc_regs __iomem *lbc;
 
 	bank = fsl_lbc_find(addr_base);
 	if (bank < 0)
 		return bank;
 
-	br = in_be32(&fsl_lbc_regs->bank[bank].br);
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+
+	lbc = fsl_lbc_ctrl_dev->regs;
+	br = in_be32(&lbc->bank[bank].br);
 
 	switch (br & BR_MSEL) {
 	case BR_MS_UPMA:
-		upm->mxmr = &fsl_lbc_regs->mamr;
+		upm->mxmr = &lbc->mamr;
 		break;
 	case BR_MS_UPMB:
-		upm->mxmr = &fsl_lbc_regs->mbmr;
+		upm->mxmr = &lbc->mbmr;
 		break;
 	case BR_MS_UPMC:
-		upm->mxmr = &fsl_lbc_regs->mcmr;
+		upm->mxmr = &lbc->mcmr;
 		break;
 	default:
 		return -EINVAL;
@@ -148,9 +135,12 @@
 	int ret = 0;
 	unsigned long flags;
 
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+
 	spin_lock_irqsave(&fsl_lbc_lock, flags);
 
-	out_be32(&fsl_lbc_regs->mar, mar);
+	out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar);
 
 	switch (upm->width) {
 	case 8:
@@ -172,3 +162,166 @@
 	return ret;
 }
 EXPORT_SYMBOL(fsl_upm_run_pattern);
+
+static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl)
+{
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+	/* clear event registers */
+	setbits32(&lbc->ltesr, LTESR_CLEAR);
+	out_be32(&lbc->lteatr, 0);
+	out_be32(&lbc->ltear, 0);
+	out_be32(&lbc->lteccr, LTECCR_CLEAR);
+	out_be32(&lbc->ltedr, LTEDR_ENABLE);
+
+	/* Enable interrupts for any detected events */
+	out_be32(&lbc->lteir, LTEIR_ENABLE);
+
+	return 0;
+}
+
+/*
+ * NOTE: This interrupt is used to report localbus events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+
+static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
+{
+	struct fsl_lbc_ctrl *ctrl = data;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	u32 status;
+
+	status = in_be32(&lbc->ltesr);
+	if (!status)
+		return IRQ_NONE;
+
+	out_be32(&lbc->ltesr, LTESR_CLEAR);
+	out_be32(&lbc->lteatr, 0);
+	out_be32(&lbc->ltear, 0);
+	ctrl->irq_status = status;
+
+	if (status & LTESR_BM)
+		dev_err(ctrl->dev, "Local bus monitor time-out: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_WP)
+		dev_err(ctrl->dev, "Write protect error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_ATMW)
+		dev_err(ctrl->dev, "Atomic write error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_ATMR)
+		dev_err(ctrl->dev, "Atomic read error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_CS)
+		dev_err(ctrl->dev, "Chip select error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_UPM)
+		;
+	if (status & LTESR_FCT) {
+		dev_err(ctrl->dev, "FCM command time-out: "
+			"LTESR 0x%08X\n", status);
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & LTESR_PAR) {
+		dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: "
+			"LTESR 0x%08X\n", status);
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & LTESR_CC) {
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & ~LTESR_MASK)
+		dev_err(ctrl->dev, "Unknown error: "
+			"LTESR 0x%08X\n", status);
+	return IRQ_HANDLED;
+}
+
+/*
+ * fsl_lbc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only.  The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+
+static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
+{
+	int ret;
+
+	if (!dev->dev.of_node) {
+		dev_err(&dev->dev, "Device OF-Node is NULL");
+		return -EFAULT;
+	}
+
+	fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL);
+	if (!fsl_lbc_ctrl_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev);
+
+	spin_lock_init(&fsl_lbc_ctrl_dev->lock);
+	init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait);
+
+	fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+	if (!fsl_lbc_ctrl_dev->regs) {
+		dev_err(&dev->dev, "failed to get memory region\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+	if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+		dev_err(&dev->dev, "failed to get irq resource\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	fsl_lbc_ctrl_dev->dev = &dev->dev;
+
+	ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev);
+	if (ret < 0)
+		goto err;
+
+	ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+				"fsl-lbc", fsl_lbc_ctrl_dev);
+	if (ret != 0) {
+		dev_err(&dev->dev, "failed to install irq (%d)\n",
+			fsl_lbc_ctrl_dev->irq);
+		ret = fsl_lbc_ctrl_dev->irq;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	iounmap(fsl_lbc_ctrl_dev->regs);
+	kfree(fsl_lbc_ctrl_dev);
+	return ret;
+}
+
+static const struct of_device_id fsl_lbc_match[] = {
+	{ .compatible = "fsl,elbc", },
+	{ .compatible = "fsl,pq3-localbus", },
+	{ .compatible = "fsl,pq2-localbus", },
+	{ .compatible = "fsl,pq2pro-localbus", },
+	{},
+};
+
+static struct platform_driver fsl_lbc_ctrl_driver = {
+	.driver = {
+		.name = "fsl-lbc",
+		.of_match_table = fsl_lbc_match,
+	},
+	.probe = fsl_lbc_ctrl_probe,
+};
+
+static int __init fsl_lbc_init(void)
+{
+	return platform_driver_register(&fsl_lbc_ctrl_driver);
+}
+module_init(fsl_lbc_init);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a494cce..8229802 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -451,6 +451,7 @@
 config MTD_NAND_FSL_ELBC
 	tristate "NAND support for Freescale eLBC controllers"
 	depends on PPC_OF
+	select FSL_LBC
 	help
 	  Various Freescale chips, including the 8313, include a NAND Flash
 	  Controller Module with built-in hardware ECC capabilities.
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 80de0bf..cd8de29 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -1,9 +1,11 @@
 /* Freescale Enhanced Local Bus Controller NAND driver
  *
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
  *
  * Authors: Nick Spence <nick.spence@freescale.com>,
  *          Scott Wood <scottwood@freescale.com>
+ *          Jack Lan <jack.lan@freescale.com>
+ *          Roy Zang <tie-fei.zang@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,6 +29,7 @@
 #include <linux/string.h>
 #include <linux/ioport.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 
@@ -42,14 +45,12 @@
 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
 #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
 
-struct fsl_elbc_ctrl;
-
 /* mtd information per set */
 
 struct fsl_elbc_mtd {
 	struct mtd_info mtd;
 	struct nand_chip chip;
-	struct fsl_elbc_ctrl *ctrl;
+	struct fsl_lbc_ctrl *ctrl;
 
 	struct device *dev;
 	int bank;               /* Chip select bank number           */
@@ -58,18 +59,12 @@
 	unsigned int fmr;       /* FCM Flash Mode Register value     */
 };
 
-/* overview of the fsl elbc controller */
+/* Freescale eLBC FCM controller infomation */
 
-struct fsl_elbc_ctrl {
+struct fsl_elbc_fcm_ctrl {
 	struct nand_hw_control controller;
 	struct fsl_elbc_mtd *chips[MAX_BANKS];
 
-	/* device info */
-	struct device *dev;
-	struct fsl_lbc_regs __iomem *regs;
-	int irq;
-	wait_queue_head_t irq_wait;
-	unsigned int irq_status; /* status read from LTESR by irq handler */
 	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -79,6 +74,7 @@
 	unsigned int mdr;        /* UPM/FCM Data Register value           */
 	unsigned int use_mdr;    /* Non zero if the MDR is to be set      */
 	unsigned int oob;        /* Non zero if operating on OOB data     */
+	unsigned int counter;	 /* counter for the initializations	  */
 	char *oob_poi;           /* Place to write ECC after read back    */
 };
 
@@ -164,11 +160,12 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	int buf_num;
 
-	ctrl->page = page_addr;
+	elbc_fcm_ctrl->page = page_addr;
 
 	out_be32(&lbc->fbar,
 	         page_addr >> (chip->phys_erase_shift - chip->page_shift));
@@ -185,16 +182,18 @@
 		buf_num = page_addr & 7;
 	}
 
-	ctrl->addr = priv->vbase + buf_num * 1024;
-	ctrl->index = column;
+	elbc_fcm_ctrl->addr = priv->vbase + buf_num * 1024;
+	elbc_fcm_ctrl->index = column;
 
 	/* for OOB data point to the second half of the buffer */
 	if (oob)
-		ctrl->index += priv->page_size ? 2048 : 512;
+		elbc_fcm_ctrl->index += priv->page_size ? 2048 : 512;
 
-	dev_vdbg(ctrl->dev, "set_addr: bank=%d, ctrl->addr=0x%p (0x%p), "
+	dev_vdbg(priv->dev, "set_addr: bank=%d, "
+			    "elbc_fcm_ctrl->addr=0x%p (0x%p), "
 	                    "index %x, pes %d ps %d\n",
-	         buf_num, ctrl->addr, priv->vbase, ctrl->index,
+		 buf_num, elbc_fcm_ctrl->addr, priv->vbase,
+		 elbc_fcm_ctrl->index,
 	         chip->phys_erase_shift, chip->page_shift);
 }
 
@@ -205,18 +204,19 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	/* Setup the FMR[OP] to execute without write protection */
 	out_be32(&lbc->fmr, priv->fmr | 3);
-	if (ctrl->use_mdr)
-		out_be32(&lbc->mdr, ctrl->mdr);
+	if (elbc_fcm_ctrl->use_mdr)
+		out_be32(&lbc->mdr, elbc_fcm_ctrl->mdr);
 
-	dev_vdbg(ctrl->dev,
+	dev_vdbg(priv->dev,
 	         "fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
 	         in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
-	dev_vdbg(ctrl->dev,
+	dev_vdbg(priv->dev,
 	         "fsl_elbc_run_command: fbar=%08x fpar=%08x "
 	         "fbcr=%08x bank=%d\n",
 	         in_be32(&lbc->fbar), in_be32(&lbc->fpar),
@@ -229,19 +229,18 @@
 	/* wait for FCM complete flag or timeout */
 	wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
 	                   FCM_TIMEOUT_MSECS * HZ/1000);
-	ctrl->status = ctrl->irq_status;
-
+	elbc_fcm_ctrl->status = ctrl->irq_status;
 	/* store mdr value in case it was needed */
-	if (ctrl->use_mdr)
-		ctrl->mdr = in_be32(&lbc->mdr);
+	if (elbc_fcm_ctrl->use_mdr)
+		elbc_fcm_ctrl->mdr = in_be32(&lbc->mdr);
 
-	ctrl->use_mdr = 0;
+	elbc_fcm_ctrl->use_mdr = 0;
 
-	if (ctrl->status != LTESR_CC) {
-		dev_info(ctrl->dev,
+	if (elbc_fcm_ctrl->status != LTESR_CC) {
+		dev_info(priv->dev,
 		         "command failed: fir %x fcr %x status %x mdr %x\n",
 		         in_be32(&lbc->fir), in_be32(&lbc->fcr),
-		         ctrl->status, ctrl->mdr);
+			 elbc_fcm_ctrl->status, elbc_fcm_ctrl->mdr);
 		return -EIO;
 	}
 
@@ -251,7 +250,7 @@
 static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
 	if (priv->page_size) {
@@ -284,15 +283,16 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
-	ctrl->use_mdr = 0;
+	elbc_fcm_ctrl->use_mdr = 0;
 
 	/* clear the read buffer */
-	ctrl->read_bytes = 0;
+	elbc_fcm_ctrl->read_bytes = 0;
 	if (command != NAND_CMD_PAGEPROG)
-		ctrl->index = 0;
+		elbc_fcm_ctrl->index = 0;
 
 	switch (command) {
 	/* READ0 and READ1 read the entire buffer to use hardware ECC. */
@@ -301,7 +301,7 @@
 
 	/* fall-through */
 	case NAND_CMD_READ0:
-		dev_dbg(ctrl->dev,
+		dev_dbg(priv->dev,
 		        "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
 		        " 0x%x, column: 0x%x.\n", page_addr, column);
 
@@ -309,8 +309,8 @@
 		out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
 		set_addr(mtd, 0, page_addr, 0);
 
-		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
-		ctrl->index += column;
+		elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		elbc_fcm_ctrl->index += column;
 
 		fsl_elbc_do_read(chip, 0);
 		fsl_elbc_run_command(mtd);
@@ -318,14 +318,14 @@
 
 	/* READOOB reads only the OOB because no ECC is performed. */
 	case NAND_CMD_READOOB:
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
 			 " 0x%x, column: 0x%x.\n", page_addr, column);
 
 		out_be32(&lbc->fbcr, mtd->oobsize - column);
 		set_addr(mtd, column, page_addr, 1);
 
-		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
 
 		fsl_elbc_do_read(chip, 1);
 		fsl_elbc_run_command(mtd);
@@ -333,7 +333,7 @@
 
 	/* READID must read all 5 possible bytes while CEB is active */
 	case NAND_CMD_READID:
-		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
 
 		out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
@@ -341,9 +341,9 @@
 		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
 		/* 5 bytes for manuf, device and exts */
 		out_be32(&lbc->fbcr, 5);
-		ctrl->read_bytes = 5;
-		ctrl->use_mdr = 1;
-		ctrl->mdr = 0;
+		elbc_fcm_ctrl->read_bytes = 5;
+		elbc_fcm_ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->mdr = 0;
 
 		set_addr(mtd, 0, 0, 0);
 		fsl_elbc_run_command(mtd);
@@ -351,7 +351,7 @@
 
 	/* ERASE1 stores the block and page address */
 	case NAND_CMD_ERASE1:
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
 		         "page_addr: 0x%x.\n", page_addr);
 		set_addr(mtd, 0, page_addr, 0);
@@ -359,7 +359,7 @@
 
 	/* ERASE2 uses the block and page address from ERASE1 */
 	case NAND_CMD_ERASE2:
-		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
 
 		out_be32(&lbc->fir,
 		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
@@ -374,8 +374,8 @@
 		         (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
 
 		out_be32(&lbc->fbcr, 0);
-		ctrl->read_bytes = 0;
-		ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->read_bytes = 0;
+		elbc_fcm_ctrl->use_mdr = 1;
 
 		fsl_elbc_run_command(mtd);
 		return;
@@ -383,14 +383,12 @@
 	/* SEQIN sets up the addr buffer and all registers except the length */
 	case NAND_CMD_SEQIN: {
 		__be32 fcr;
-		dev_vdbg(ctrl->dev,
-		         "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+		dev_vdbg(priv->dev,
+			 "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
 		         "page_addr: 0x%x, column: 0x%x.\n",
 		         page_addr, column);
 
-		ctrl->column = column;
-		ctrl->oob = 0;
-		ctrl->use_mdr = 1;
+		elbc_fcm_ctrl->use_mdr = 1;
 
 		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
 		      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
@@ -420,7 +418,7 @@
 				/* OOB area --> READOOB */
 				column -= mtd->writesize;
 				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
-				ctrl->oob = 1;
+				elbc_fcm_ctrl->oob = 1;
 			} else {
 				WARN_ON(column != 0);
 				/* First 256 bytes --> READ0 */
@@ -429,24 +427,24 @@
 		}
 
 		out_be32(&lbc->fcr, fcr);
-		set_addr(mtd, column, page_addr, ctrl->oob);
+		set_addr(mtd, column, page_addr, elbc_fcm_ctrl->oob);
 		return;
 	}
 
 	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
 	case NAND_CMD_PAGEPROG: {
 		int full_page;
-		dev_vdbg(ctrl->dev,
+		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
-		         "writing %d bytes.\n", ctrl->index);
+			 "writing %d bytes.\n", elbc_fcm_ctrl->index);
 
 		/* if the write did not start at 0 or is not a full page
 		 * then set the exact length, otherwise use a full page
 		 * write so the HW generates the ECC.
 		 */
-		if (ctrl->oob || ctrl->column != 0 ||
-		    ctrl->index != mtd->writesize + mtd->oobsize) {
-			out_be32(&lbc->fbcr, ctrl->index);
+		if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
+		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+			out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
 			full_page = 0;
 		} else {
 			out_be32(&lbc->fbcr, 0);
@@ -458,21 +456,21 @@
 		/* Read back the page in order to fill in the ECC for the
 		 * caller.  Is this really needed?
 		 */
-		if (full_page && ctrl->oob_poi) {
+		if (full_page && elbc_fcm_ctrl->oob_poi) {
 			out_be32(&lbc->fbcr, 3);
 			set_addr(mtd, 6, page_addr, 1);
 
-			ctrl->read_bytes = mtd->writesize + 9;
+			elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
 
 			fsl_elbc_do_read(chip, 1);
 			fsl_elbc_run_command(mtd);
 
-			memcpy_fromio(ctrl->oob_poi + 6,
-			              &ctrl->addr[ctrl->index], 3);
-			ctrl->index += 3;
+			memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
+				&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
+			elbc_fcm_ctrl->index += 3;
 		}
 
-		ctrl->oob_poi = NULL;
+		elbc_fcm_ctrl->oob_poi = NULL;
 		return;
 	}
 
@@ -485,26 +483,26 @@
 		out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
 		out_be32(&lbc->fbcr, 1);
 		set_addr(mtd, 0, 0, 0);
-		ctrl->read_bytes = 1;
+		elbc_fcm_ctrl->read_bytes = 1;
 
 		fsl_elbc_run_command(mtd);
 
 		/* The chip always seems to report that it is
 		 * write-protected, even when it is not.
 		 */
-		setbits8(ctrl->addr, NAND_STATUS_WP);
+		setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP);
 		return;
 
 	/* RESET without waiting for the ready line */
 	case NAND_CMD_RESET:
-		dev_dbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+		dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
 		out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
 		out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
 		fsl_elbc_run_command(mtd);
 		return;
 
 	default:
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
 		        command);
 	}
@@ -524,24 +522,24 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	unsigned int bufsize = mtd->writesize + mtd->oobsize;
 
 	if (len <= 0) {
-		dev_err(ctrl->dev, "write_buf of %d bytes", len);
-		ctrl->status = 0;
+		dev_err(priv->dev, "write_buf of %d bytes", len);
+		elbc_fcm_ctrl->status = 0;
 		return;
 	}
 
-	if ((unsigned int)len > bufsize - ctrl->index) {
-		dev_err(ctrl->dev,
+	if ((unsigned int)len > bufsize - elbc_fcm_ctrl->index) {
+		dev_err(priv->dev,
 		        "write_buf beyond end of buffer "
 		        "(%d requested, %u available)\n",
-		        len, bufsize - ctrl->index);
-		len = bufsize - ctrl->index;
+			len, bufsize - elbc_fcm_ctrl->index);
+		len = bufsize - elbc_fcm_ctrl->index;
 	}
 
-	memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+	memcpy_toio(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], buf, len);
 	/*
 	 * This is workaround for the weird elbc hangs during nand write,
 	 * Scott Wood says: "...perhaps difference in how long it takes a
@@ -549,9 +547,9 @@
 	 * is causing problems, and sync isn't helping for some reason."
 	 * Reading back the last byte helps though.
 	 */
-	in_8(&ctrl->addr[ctrl->index] + len - 1);
+	in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index] + len - 1);
 
-	ctrl->index += len;
+	elbc_fcm_ctrl->index += len;
 }
 
 /*
@@ -562,13 +560,13 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 
 	/* If there are still bytes in the FCM, then use the next byte. */
-	if (ctrl->index < ctrl->read_bytes)
-		return in_8(&ctrl->addr[ctrl->index++]);
+	if (elbc_fcm_ctrl->index < elbc_fcm_ctrl->read_bytes)
+		return in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index++]);
 
-	dev_err(ctrl->dev, "read_byte beyond end of buffer\n");
+	dev_err(priv->dev, "read_byte beyond end of buffer\n");
 	return ERR_BYTE;
 }
 
@@ -579,18 +577,19 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	int avail;
 
 	if (len < 0)
 		return;
 
-	avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
-	memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
-	ctrl->index += avail;
+	avail = min((unsigned int)len,
+			elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
+	memcpy_fromio(buf, &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], avail);
+	elbc_fcm_ctrl->index += avail;
 
 	if (len > avail)
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "read_buf beyond end of buffer "
 		        "(%d requested, %d available)\n",
 		        len, avail);
@@ -603,30 +602,32 @@
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	int i;
 
 	if (len < 0) {
-		dev_err(ctrl->dev, "write_buf of %d bytes", len);
+		dev_err(priv->dev, "write_buf of %d bytes", len);
 		return -EINVAL;
 	}
 
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		dev_err(ctrl->dev,
-		        "verify_buf beyond end of buffer "
-		        "(%d requested, %u available)\n",
-		        len, ctrl->read_bytes - ctrl->index);
+	if ((unsigned int)len >
+			elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index) {
+		dev_err(priv->dev,
+			"verify_buf beyond end of buffer "
+			"(%d requested, %u available)\n",
+			len, elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
 
-		ctrl->index = ctrl->read_bytes;
+		elbc_fcm_ctrl->index = elbc_fcm_ctrl->read_bytes;
 		return -EINVAL;
 	}
 
 	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
+		if (in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index + i])
+				!= buf[i])
 			break;
 
-	ctrl->index += len;
-	return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
+	elbc_fcm_ctrl->index += len;
+	return i == len && elbc_fcm_ctrl->status == LTESR_CC ? 0 : -EIO;
 }
 
 /* This function is called after Program and Erase Operations to
@@ -635,22 +636,22 @@
 static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 
-	if (ctrl->status != LTESR_CC)
+	if (elbc_fcm_ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
 
 	/* The chip always seems to report that it is
 	 * write-protected, even when it is not.
 	 */
-	return (ctrl->mdr & 0xff) | NAND_STATUS_WP;
+	return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
 static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
 
@@ -665,41 +666,41 @@
 	priv->fmr |= (12 << FMR_CWTO_SHIFT) |  /* Timeout > 12 ms */
 	             (al << FMR_AL_SHIFT);
 
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
 	        chip->numchips);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
 	        chip->chipsize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
 	        chip->pagemask);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
 	        chip->chip_delay);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
 	        chip->badblockpos);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
 	        chip->chip_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
 	        chip->page_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
 	        chip->phys_erase_shift);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
 	        chip->ecclayout);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
 	        chip->ecc.mode);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
 	        chip->ecc.steps);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
 	        chip->ecc.bytes);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
 	        chip->ecc.total);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
 	        chip->ecc.layout);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
 	        mtd->erasesize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
 	        mtd->writesize);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
 	        mtd->oobsize);
 
 	/* adjust Option Register and ECC to match Flash page size */
@@ -719,7 +720,7 @@
 			chip->badblock_pattern = &largepage_memorybased;
 		}
 	} else {
-		dev_err(ctrl->dev,
+		dev_err(priv->dev,
 		        "fsl_elbc_init: page size %d is not supported\n",
 		        mtd->writesize);
 		return -1;
@@ -750,18 +751,19 @@
                                 const uint8_t *buf)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 
 	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 
-	ctrl->oob_poi = chip->oob_poi;
+	elbc_fcm_ctrl->oob_poi = chip->oob_poi;
 }
 
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
 	struct nand_chip *chip = &priv->chip;
 
 	dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
@@ -790,7 +792,7 @@
 	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
 			NAND_USE_FLASH_BBT;
 
-	chip->controller = &ctrl->controller;
+	chip->controller = &elbc_fcm_ctrl->controller;
 	chip->priv = priv;
 
 	chip->ecc.read_page = fsl_elbc_read_page;
@@ -815,8 +817,7 @@
 
 static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 {
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
 	nand_release(&priv->mtd);
 
 	kfree(priv->mtd.name);
@@ -824,18 +825,21 @@
 	if (priv->vbase)
 		iounmap(priv->vbase);
 
-	ctrl->chips[priv->bank] = NULL;
+	elbc_fcm_ctrl->chips[priv->bank] = NULL;
 	kfree(priv);
-
+	kfree(elbc_fcm_ctrl);
 	return 0;
 }
 
-static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-					 struct device_node *node)
+static DEFINE_MUTEX(fsl_elbc_nand_mutex);
+
+static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
 {
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_regs __iomem *lbc;
 	struct fsl_elbc_mtd *priv;
 	struct resource res;
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
+
 #ifdef CONFIG_MTD_PARTITIONS
 	static const char *part_probe_types[]
 		= { "cmdlinepart", "RedBoot", NULL };
@@ -843,11 +847,18 @@
 #endif
 	int ret;
 	int bank;
+	struct device *dev;
+	struct device_node *node = pdev->dev.of_node;
+
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+	lbc = fsl_lbc_ctrl_dev->regs;
+	dev = fsl_lbc_ctrl_dev->dev;
 
 	/* get, allocate and map the memory resource */
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret) {
-		dev_err(ctrl->dev, "failed to get resource\n");
+		dev_err(dev, "failed to get resource\n");
 		return ret;
 	}
 
@@ -861,7 +872,7 @@
 			break;
 
 	if (bank >= MAX_BANKS) {
-		dev_err(ctrl->dev, "address did not match any chip selects\n");
+		dev_err(dev, "address did not match any chip selects\n");
 		return -ENODEV;
 	}
 
@@ -869,14 +880,33 @@
 	if (!priv)
 		return -ENOMEM;
 
-	ctrl->chips[bank] = priv;
+	mutex_lock(&fsl_elbc_nand_mutex);
+	if (!fsl_lbc_ctrl_dev->nand) {
+		elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL);
+		if (!elbc_fcm_ctrl) {
+			dev_err(dev, "failed to allocate memory\n");
+			mutex_unlock(&fsl_elbc_nand_mutex);
+			ret = -ENOMEM;
+			goto err;
+		}
+		elbc_fcm_ctrl->counter++;
+
+		spin_lock_init(&elbc_fcm_ctrl->controller.lock);
+		init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+		fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
+	} else {
+		elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+	}
+	mutex_unlock(&fsl_elbc_nand_mutex);
+
+	elbc_fcm_ctrl->chips[bank] = priv;
 	priv->bank = bank;
-	priv->ctrl = ctrl;
-	priv->dev = ctrl->dev;
+	priv->ctrl = fsl_lbc_ctrl_dev;
+	priv->dev = dev;
 
 	priv->vbase = ioremap(res.start, resource_size(&res));
 	if (!priv->vbase) {
-		dev_err(ctrl->dev, "failed to map chip region\n");
+		dev_err(dev, "failed to map chip region\n");
 		ret = -ENOMEM;
 		goto err;
 	}
@@ -933,171 +963,53 @@
 	return ret;
 }
 
-static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
+static int fsl_elbc_nand_remove(struct platform_device *pdev)
 {
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-
-	/*
-	 * NAND transactions can tie up the bus for a long time, so set the
-	 * bus timeout to max by clearing LBCR[BMT] (highest base counter
-	 * value) and setting LBCR[BMTPS] to the highest prescaler value.
-	 */
-	clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15);
-
-	/* clear event registers */
-	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
-	out_be32(&lbc->lteatr, 0);
-
-	/* Enable interrupts for any detected events */
-	out_be32(&lbc->lteir, LTESR_NAND_MASK);
-
-	ctrl->read_bytes = 0;
-	ctrl->index = 0;
-	ctrl->addr = NULL;
-
-	return 0;
-}
-
-static int fsl_elbc_ctrl_remove(struct platform_device *ofdev)
-{
-	struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
 	int i;
-
+	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
 	for (i = 0; i < MAX_BANKS; i++)
-		if (ctrl->chips[i])
-			fsl_elbc_chip_remove(ctrl->chips[i]);
+		if (elbc_fcm_ctrl->chips[i])
+			fsl_elbc_chip_remove(elbc_fcm_ctrl->chips[i]);
 
-	if (ctrl->irq)
-		free_irq(ctrl->irq, ctrl);
-
-	if (ctrl->regs)
-		iounmap(ctrl->regs);
-
-	dev_set_drvdata(&ofdev->dev, NULL);
-	kfree(ctrl);
-	return 0;
-}
-
-/* NOTE: This interrupt is also used to report other localbus events,
- * such as transaction errors on other chipselects.  If we want to
- * capture those, we'll need to move the IRQ code into a shared
- * LBC driver.
- */
-
-static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
-{
-	struct fsl_elbc_ctrl *ctrl = data;
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-	__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
-
-	if (status) {
-		out_be32(&lbc->ltesr, status);
-		out_be32(&lbc->lteatr, 0);
-
-		ctrl->irq_status = status;
-		smp_wmb();
-		wake_up(&ctrl->irq_wait);
-
-		return IRQ_HANDLED;
+	mutex_lock(&fsl_elbc_nand_mutex);
+	elbc_fcm_ctrl->counter--;
+	if (!elbc_fcm_ctrl->counter) {
+		fsl_lbc_ctrl_dev->nand = NULL;
+		kfree(elbc_fcm_ctrl);
 	}
-
-	return IRQ_NONE;
-}
-
-/* fsl_elbc_ctrl_probe
- *
- * called by device layer when it finds a device matching
- * one our driver can handled. This code allocates all of
- * the resources needed for the controller only.  The
- * resources for the NAND banks themselves are allocated
- * in the chip probe function.
-*/
-
-static int __devinit fsl_elbc_ctrl_probe(struct platform_device *ofdev,
-                                         const struct of_device_id *match)
-{
-	struct device_node *child;
-	struct fsl_elbc_ctrl *ctrl;
-	int ret;
-
-	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
-	if (!ctrl)
-		return -ENOMEM;
-
-	dev_set_drvdata(&ofdev->dev, ctrl);
-
-	spin_lock_init(&ctrl->controller.lock);
-	init_waitqueue_head(&ctrl->controller.wq);
-	init_waitqueue_head(&ctrl->irq_wait);
-
-	ctrl->regs = of_iomap(ofdev->dev.of_node, 0);
-	if (!ctrl->regs) {
-		dev_err(&ofdev->dev, "failed to get memory region\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	ctrl->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
-	if (ctrl->irq == NO_IRQ) {
-		dev_err(&ofdev->dev, "failed to get irq resource\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	ctrl->dev = &ofdev->dev;
-
-	ret = fsl_elbc_ctrl_init(ctrl);
-	if (ret < 0)
-		goto err;
-
-	ret = request_irq(ctrl->irq, fsl_elbc_ctrl_irq, 0, "fsl-elbc", ctrl);
-	if (ret != 0) {
-		dev_err(&ofdev->dev, "failed to install irq (%d)\n",
-		        ctrl->irq);
-		ret = ctrl->irq;
-		goto err;
-	}
-
-	for_each_child_of_node(ofdev->dev.of_node, child)
-		if (of_device_is_compatible(child, "fsl,elbc-fcm-nand"))
-			fsl_elbc_chip_probe(ctrl, child);
+	mutex_unlock(&fsl_elbc_nand_mutex);
 
 	return 0;
 
-err:
-	fsl_elbc_ctrl_remove(ofdev);
-	return ret;
 }
 
-static const struct of_device_id fsl_elbc_match[] = {
-	{
-		.compatible = "fsl,elbc",
-	},
+static const struct of_device_id fsl_elbc_nand_match[] = {
+	{ .compatible = "fsl,elbc-fcm-nand", },
 	{}
 };
 
-static struct of_platform_driver fsl_elbc_ctrl_driver = {
+static struct platform_driver fsl_elbc_nand_driver = {
 	.driver = {
-		.name = "fsl-elbc",
+		.name = "fsl,elbc-fcm-nand",
 		.owner = THIS_MODULE,
-		.of_match_table = fsl_elbc_match,
+		.of_match_table = fsl_elbc_nand_match,
 	},
-	.probe = fsl_elbc_ctrl_probe,
-	.remove = fsl_elbc_ctrl_remove,
+	.probe = fsl_elbc_nand_probe,
+	.remove = fsl_elbc_nand_remove,
 };
 
-static int __init fsl_elbc_init(void)
+static int __init fsl_elbc_nand_init(void)
 {
-	return of_register_platform_driver(&fsl_elbc_ctrl_driver);
+	return platform_driver_register(&fsl_elbc_nand_driver);
 }
 
-static void __exit fsl_elbc_exit(void)
+static void __exit fsl_elbc_nand_exit(void)
 {
-	of_unregister_platform_driver(&fsl_elbc_ctrl_driver);
+	platform_driver_unregister(&fsl_elbc_nand_driver);
 }
 
-module_init(fsl_elbc_init);
-module_exit(fsl_elbc_exit);
+module_init(fsl_elbc_nand_init);
+module_exit(fsl_elbc_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Freescale");