parport_pc: Coding style
Michael's patch fixed some of the coding style so the style is now
inconsistent. Sort the rest out
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 24984c4..edf83e9 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1,5 +1,5 @@
/* Low-level parallel-port routines for 8255-based PC-style hardware.
- *
+ *
* Authors: Phil Blundell <philb@gnu.org>
* Tim Waugh <tim@cyberelk.demon.co.uk>
* Jose Renau <renau@acm.org>
@@ -11,7 +11,7 @@
* Cleaned up include files - Russell King <linux@arm.uk.linux.org>
* DMA support - Bert De Jonghe <bert@sophis.be>
* Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999
- * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
* Various hacks, Fred Barnes, 04/2001
* Updated probing logic - Adam Belay <ambx1@neo.rr.com>
*/
@@ -56,10 +56,10 @@
#include <linux/pnp.h>
#include <linux/platform_device.h>
#include <linux/sysctl.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
@@ -82,7 +82,7 @@
#define ECR_TST 06
#define ECR_CNF 07
#define ECR_MODE_MASK 0xe0
-#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v))
#undef DEBUG
@@ -109,27 +109,27 @@
static int pnp_registered_parport;
/* frob_control, but for ECR */
-static void frob_econtrol (struct parport *pb, unsigned char m,
+static void frob_econtrol(struct parport *pb, unsigned char m,
unsigned char v)
{
unsigned char ectr = 0;
if (m != 0xff)
- ectr = inb (ECONTROL (pb));
+ ectr = inb(ECONTROL(pb));
- DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+ DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
m, v, ectr, (ectr & ~m) ^ v);
- outb ((ectr & ~m) ^ v, ECONTROL (pb));
+ outb((ectr & ~m) ^ v, ECONTROL(pb));
}
-static __inline__ void frob_set_mode (struct parport *p, int mode)
+static inline void frob_set_mode(struct parport *p, int mode)
{
- frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+ frob_econtrol(p, ECR_MODE_MASK, mode << 5);
}
#ifdef CONFIG_PARPORT_PC_FIFO
-/* Safely change the mode bits in the ECR
+/* Safely change the mode bits in the ECR
Returns:
0 : Success
-EBUSY: Could not drain FIFO in some finite amount of time,
@@ -141,17 +141,18 @@
unsigned char oecr;
int mode;
- DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+ DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
if (!priv->ecr) {
- printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+ printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
return 0;
}
/* Bits <7:5> contain the mode. */
- oecr = inb (ECONTROL (p));
+ oecr = inb(ECONTROL(p));
mode = (oecr >> 5) & 0x7;
- if (mode == m) return 0;
+ if (mode == m)
+ return 0;
if (mode >= 2 && !(priv->ctr & 0x20)) {
/* This mode resets the FIFO, so we may
@@ -163,19 +164,21 @@
case ECR_ECP: /* ECP Parallel Port mode */
/* Busy wait for 200us */
for (counter = 0; counter < 40; counter++) {
- if (inb (ECONTROL (p)) & 0x01)
+ if (inb(ECONTROL(p)) & 0x01)
break;
- if (signal_pending (current)) break;
- udelay (5);
+ if (signal_pending(current))
+ break;
+ udelay(5);
}
/* Poll slowly. */
- while (!(inb (ECONTROL (p)) & 0x01)) {
- if (time_after_eq (jiffies, expire))
+ while (!(inb(ECONTROL(p)) & 0x01)) {
+ if (time_after_eq(jiffies, expire))
/* The FIFO is stuck. */
return -EBUSY;
- schedule_timeout_interruptible(msecs_to_jiffies(10));
- if (signal_pending (current))
+ schedule_timeout_interruptible(
+ msecs_to_jiffies(10));
+ if (signal_pending(current))
break;
}
}
@@ -185,20 +188,20 @@
/* We have to go through mode 001 */
oecr &= ~(7 << 5);
oecr |= ECR_PS2 << 5;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
}
/* Set the mode. */
oecr &= ~(7 << 5);
oecr |= m << 5;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
return 0;
}
#ifdef CONFIG_PARPORT_1284
/* Find FIFO lossage; FIFO is reset */
#if 0
-static int get_fifo_residue (struct parport *p)
+static int get_fifo_residue(struct parport *p)
{
int residue;
int cnfga;
@@ -206,26 +209,26 @@
/* Adjust for the contents of the FIFO. */
for (residue = priv->fifo_depth; ; residue--) {
- if (inb (ECONTROL (p)) & 0x2)
+ if (inb(ECONTROL(p)) & 0x2)
/* Full up. */
break;
- outb (0, FIFO (p));
+ outb(0, FIFO(p));
}
- printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+ printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
residue);
/* Reset the FIFO. */
- frob_set_mode (p, ECR_PS2);
+ frob_set_mode(p, ECR_PS2);
/* Now change to config mode and clean up. FIXME */
- frob_set_mode (p, ECR_CNF);
- cnfga = inb (CONFIGA (p));
- printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+ frob_set_mode(p, ECR_CNF);
+ cnfga = inb(CONFIGA(p));
+ printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
if (!(cnfga & (1<<2))) {
- printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+ printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
residue++;
}
@@ -233,9 +236,11 @@
* PWord != 1 byte. */
/* Back to PS2 mode. */
- frob_set_mode (p, ECR_PS2);
+ frob_set_mode(p, ECR_PS2);
- DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+ DPRINTK(KERN_DEBUG
+ "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
+ inb(ECONTROL(p)));
return residue;
}
#endif /* 0 */
@@ -257,8 +262,8 @@
/* To clear timeout some chips require double read */
parport_pc_read_status(pb);
r = parport_pc_read_status(pb);
- outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
- outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+ outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+ outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
r = parport_pc_read_status(pb);
return !(r & 0x01);
@@ -272,7 +277,8 @@
* of these are in parport_pc.h.
*/
-static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+static void parport_pc_init_state(struct pardevice *dev,
+ struct parport_state *s)
{
s->u.pc.ctr = 0xc;
if (dev->irq_func &&
@@ -289,22 +295,23 @@
const struct parport_pc_private *priv = p->physport->private_data;
s->u.pc.ctr = priv->ctr;
if (priv->ecr)
- s->u.pc.ecr = inb (ECONTROL (p));
+ s->u.pc.ecr = inb(ECONTROL(p));
}
-static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+static void parport_pc_restore_state(struct parport *p,
+ struct parport_state *s)
{
struct parport_pc_private *priv = p->physport->private_data;
register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
- outb (c, CONTROL (p));
+ outb(c, CONTROL(p));
priv->ctr = c;
if (priv->ecr)
- ECR_WRITE (p, s->u.pc.ecr);
+ ECR_WRITE(p, s->u.pc.ecr);
}
#ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got = 0;
@@ -316,54 +323,52 @@
* nFault is 0 if there is at least 1 byte in the Warp's FIFO
* pError is 1 if there are 16 bytes in the Warp's FIFO
*/
- status = inb (STATUS (port));
+ status = inb(STATUS(port));
- while (!(status & 0x08) && (got < length)) {
- if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+ while (!(status & 0x08) && got < length) {
+ if (left >= 16 && (status & 0x20) && !(status & 0x08)) {
/* can grab 16 bytes from warp fifo */
- if (!((long)buf & 0x03)) {
- insl (EPPDATA (port), buf, 4);
- } else {
- insb (EPPDATA (port), buf, 16);
- }
+ if (!((long)buf & 0x03))
+ insl(EPPDATA(port), buf, 4);
+ else
+ insb(EPPDATA(port), buf, 16);
buf += 16;
got += 16;
left -= 16;
} else {
/* grab single byte from the warp fifo */
- *((char *)buf) = inb (EPPDATA (port));
+ *((char *)buf) = inb(EPPDATA(port));
buf++;
got++;
left--;
}
- status = inb (STATUS (port));
+ status = inb(STATUS(port));
if (status & 0x01) {
/* EPP timeout should never occur... */
- printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
- "w91284pic (should not have done)\n", port->name);
- clear_epp_timeout (port);
+ printk(KERN_DEBUG
+"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+ clear_epp_timeout(port);
}
}
return got;
}
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- if (!(((long)buf | length) & 0x03)) {
- insl (EPPDATA (port), buf, (length >> 2));
- } else {
- insb (EPPDATA (port), buf, length);
- }
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (!(((long)buf | length) & 0x03))
+ insl(EPPDATA(port), buf, (length >> 2));
+ else
+ insb(EPPDATA(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; got < length; got++) {
- *((char*)buf) = inb (EPPDATA(port));
+ *((char *)buf) = inb(EPPDATA(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
+ if (inb(STATUS(port)) & 0x01) {
/* EPP timeout */
- clear_epp_timeout (port);
+ clear_epp_timeout(port);
break;
}
}
@@ -371,28 +376,27 @@
return got;
}
-static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
- size_t length, int flags)
+static size_t parport_pc_epp_write_data(struct parport *port, const void *buf,
+ size_t length, int flags)
{
size_t written = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- if (!(((long)buf | length) & 0x03)) {
- outsl (EPPDATA (port), buf, (length >> 2));
- } else {
- outsb (EPPDATA (port), buf, length);
- }
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (!(((long)buf | length) & 0x03))
+ outsl(EPPDATA(port), buf, (length >> 2));
+ else
+ outsb(EPPDATA(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; written < length; written++) {
- outb (*((char*)buf), EPPDATA(port));
+ outb(*((char *)buf), EPPDATA(port));
buf++;
- if (inb (STATUS(port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -400,24 +404,24 @@
return written;
}
-static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+static size_t parport_pc_epp_read_addr(struct parport *port, void *buf,
size_t length, int flags)
{
size_t got = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- insb (EPPADDR (port), buf, length);
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ insb(EPPADDR(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; got < length; got++) {
- *((char*)buf) = inb (EPPADDR (port));
+ *((char *)buf) = inb(EPPADDR(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -425,25 +429,25 @@
return got;
}
-static size_t parport_pc_epp_write_addr (struct parport *port,
+static size_t parport_pc_epp_write_addr(struct parport *port,
const void *buf, size_t length,
int flags)
{
size_t written = 0;
if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
- outsb (EPPADDR (port), buf, length);
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ outsb(EPPADDR(port), buf, length);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
return -EIO;
}
return length;
}
for (; written < length; written++) {
- outb (*((char*)buf), EPPADDR (port));
+ outb(*((char *)buf), EPPADDR(port));
buf++;
- if (inb (STATUS (port)) & 0x01) {
- clear_epp_timeout (port);
+ if (inb(STATUS(port)) & 0x01) {
+ clear_epp_timeout(port);
break;
}
}
@@ -451,74 +455,74 @@
return written;
}
-static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got;
- frob_set_mode (port, ECR_EPP);
- parport_pc_data_reverse (port);
- parport_pc_write_control (port, 0x4);
- got = parport_pc_epp_read_data (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_data_reverse(port);
+ parport_pc_write_control(port, 0x4);
+ got = parport_pc_epp_read_data(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return got;
}
-static size_t parport_pc_ecpepp_write_data (struct parport *port,
- const void *buf, size_t length,
- int flags)
+static size_t parport_pc_ecpepp_write_data(struct parport *port,
+ const void *buf, size_t length,
+ int flags)
{
size_t written;
- frob_set_mode (port, ECR_EPP);
- parport_pc_write_control (port, 0x4);
- parport_pc_data_forward (port);
- written = parport_pc_epp_write_data (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_write_control(port, 0x4);
+ parport_pc_data_forward(port);
+ written = parport_pc_epp_write_data(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return written;
}
-static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
- size_t length, int flags)
+static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf,
+ size_t length, int flags)
{
size_t got;
- frob_set_mode (port, ECR_EPP);
- parport_pc_data_reverse (port);
- parport_pc_write_control (port, 0x4);
- got = parport_pc_epp_read_addr (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_data_reverse(port);
+ parport_pc_write_control(port, 0x4);
+ got = parport_pc_epp_read_addr(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return got;
}
-static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+static size_t parport_pc_ecpepp_write_addr(struct parport *port,
const void *buf, size_t length,
int flags)
{
size_t written;
- frob_set_mode (port, ECR_EPP);
- parport_pc_write_control (port, 0x4);
- parport_pc_data_forward (port);
- written = parport_pc_epp_write_addr (port, buf, length, flags);
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_EPP);
+ parport_pc_write_control(port, 0x4);
+ parport_pc_data_forward(port);
+ written = parport_pc_epp_write_addr(port, buf, length, flags);
+ frob_set_mode(port, ECR_PS2);
return written;
}
#endif /* IEEE 1284 support */
#ifdef CONFIG_PARPORT_PC_FIFO
-static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+static size_t parport_pc_fifo_write_block_pio(struct parport *port,
const void *buf, size_t length)
{
int ret = 0;
const unsigned char *bufp = buf;
size_t left = length;
unsigned long expire = jiffies + port->physport->cad->timeout;
- const int fifo = FIFO (port);
+ const int fifo = FIFO(port);
int poll_for = 8; /* 80 usecs */
const struct parport_pc_private *priv = port->physport->private_data;
const int fifo_depth = priv->fifo_depth;
@@ -526,25 +530,25 @@
port = port->physport;
/* We don't want to be interrupted every character. */
- parport_pc_disable_irq (port);
+ parport_pc_disable_irq(port);
/* set nErrIntrEn and serviceIntr */
- frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+ frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
/* Forward mode. */
- parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
while (left) {
unsigned char byte;
- unsigned char ecrval = inb (ECONTROL (port));
+ unsigned char ecrval = inb(ECONTROL(port));
int i = 0;
- if (need_resched() && time_before (jiffies, expire))
+ if (need_resched() && time_before(jiffies, expire))
/* Can't yield the port. */
- schedule ();
+ schedule();
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
@@ -552,21 +556,22 @@
/* FIFO is full. Wait for interrupt. */
/* Clear serviceIntr */
- ECR_WRITE (port, ecrval & ~(1<<2));
- false_alarm:
- ret = parport_wait_event (port, HZ);
- if (ret < 0) break;
+ ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+ ret = parport_wait_event(port, HZ);
+ if (ret < 0)
+ break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
- printk (KERN_DEBUG "FIFO write timed out\n");
+ printk(KERN_DEBUG "FIFO write timed out\n");
break;
}
- ecrval = inb (ECONTROL (port));
+ ecrval = inb(ECONTROL(port));
if (!(ecrval & (1<<2))) {
if (need_resched() &&
- time_before (jiffies, expire))
- schedule ();
+ time_before(jiffies, expire))
+ schedule();
goto false_alarm;
}
@@ -577,38 +582,38 @@
/* Can't fail now. */
expire = jiffies + port->cad->timeout;
- poll:
- if (signal_pending (current))
+poll:
+ if (signal_pending(current))
break;
if (ecrval & 0x01) {
/* FIFO is empty. Blast it full. */
const int n = left < fifo_depth ? left : fifo_depth;
- outsb (fifo, bufp, n);
+ outsb(fifo, bufp, n);
bufp += n;
left -= n;
/* Adjust the poll time. */
- if (i < (poll_for - 2)) poll_for--;
+ if (i < (poll_for - 2))
+ poll_for--;
continue;
} else if (i++ < poll_for) {
- udelay (10);
- ecrval = inb (ECONTROL (port));
+ udelay(10);
+ ecrval = inb(ECONTROL(port));
goto poll;
}
- /* Half-full (call me an optimist) */
+ /* Half-full(call me an optimist) */
byte = *bufp++;
- outb (byte, fifo);
+ outb(byte, fifo);
left--;
- }
-
-dump_parport_state ("leave fifo_write_block_pio", port);
+ }
+ dump_parport_state("leave fifo_write_block_pio", port);
return length - left;
}
#ifdef HAS_DMA
-static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+static size_t parport_pc_fifo_write_block_dma(struct parport *port,
const void *buf, size_t length)
{
int ret = 0;
@@ -621,7 +626,7 @@
unsigned long start = (unsigned long) buf;
unsigned long end = (unsigned long) buf + length - 1;
-dump_parport_state ("enter fifo_write_block_dma", port);
+dump_parport_state("enter fifo_write_block_dma", port);
if (end < MAX_DMA_ADDRESS) {
/* If it would cross a 64k boundary, cap it at the end. */
if ((start ^ end) & ~0xffffUL)
@@ -629,8 +634,9 @@
dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
DMA_TO_DEVICE);
- } else {
- /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+ } else {
+ /* above 16 MB we use a bounce buffer as ISA-DMA
+ is not possible */
maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */
dma_addr = priv->dma_handle;
dma_handle = 0;
@@ -639,12 +645,12 @@
port = port->physport;
/* We don't want to be interrupted every character. */
- parport_pc_disable_irq (port);
+ parport_pc_disable_irq(port);
/* set nErrIntrEn and serviceIntr */
- frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+ frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
/* Forward mode. */
- parport_pc_data_forward (port); /* Must be in PS2 mode */
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
while (left) {
unsigned long expire = jiffies + port->physport->cad->timeout;
@@ -665,10 +671,10 @@
set_dma_count(port->dma, count);
/* Set DMA mode */
- frob_econtrol (port, 1<<3, 1<<3);
+ frob_econtrol(port, 1<<3, 1<<3);
/* Clear serviceIntr */
- frob_econtrol (port, 1<<2, 0);
+ frob_econtrol(port, 1<<2, 0);
enable_dma(port->dma);
release_dma_lock(dmaflag);
@@ -676,20 +682,22 @@
/* assume DMA will be successful */
left -= count;
buf += count;
- if (dma_handle) dma_addr += count;
+ if (dma_handle)
+ dma_addr += count;
/* Wait for interrupt. */
- false_alarm:
- ret = parport_wait_event (port, HZ);
- if (ret < 0) break;
+false_alarm:
+ ret = parport_wait_event(port, HZ);
+ if (ret < 0)
+ break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
- printk (KERN_DEBUG "DMA write timed out\n");
+ printk(KERN_DEBUG "DMA write timed out\n");
break;
}
/* Is serviceIntr set? */
- if (!(inb (ECONTROL (port)) & (1<<2))) {
+ if (!(inb(ECONTROL(port)) & (1<<2))) {
cond_resched();
goto false_alarm;
@@ -705,14 +713,15 @@
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
/* update for possible DMA residue ! */
buf -= count;
left += count;
- if (dma_handle) dma_addr -= count;
+ if (dma_handle)
+ dma_addr -= count;
}
/* Maybe got here through break, so adjust for DMA residue! */
@@ -723,12 +732,12 @@
release_dma_lock(dmaflag);
/* Turn off DMA mode */
- frob_econtrol (port, 1<<3, 0);
+ frob_econtrol(port, 1<<3, 0);
if (dma_handle)
dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
-dump_parport_state ("leave fifo_write_block_dma", port);
+dump_parport_state("leave fifo_write_block_dma", port);
return length - left;
}
#endif
@@ -738,13 +747,13 @@
{
#ifdef HAS_DMA
if (port->dma != PARPORT_DMA_NONE)
- return parport_pc_fifo_write_block_dma (port, buf, length);
+ return parport_pc_fifo_write_block_dma(port, buf, length);
#endif
- return parport_pc_fifo_write_block_pio (port, buf, length);
+ return parport_pc_fifo_write_block_pio(port, buf, length);
}
/* Parallel Port FIFO mode (ECP chipsets) */
-static size_t parport_pc_compat_write_block_pio (struct parport *port,
+static size_t parport_pc_compat_write_block_pio(struct parport *port,
const void *buf, size_t length,
int flags)
{
@@ -756,14 +765,16 @@
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_write_compat (port, buf,
+ return parport_ieee1284_write_compat(port, buf,
length, flags);
/* Set up parallel port FIFO mode.*/
- parport_pc_data_forward (port); /* Must be in PS2 mode */
- parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
+ parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
+ port->name);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
@@ -775,40 +786,39 @@
* the FIFO is empty, so allow 4 seconds for each position
* in the fifo.
*/
- expire = jiffies + (priv->fifo_depth * HZ * 4);
+ expire = jiffies + (priv->fifo_depth * HZ * 4);
do {
/* Wait for the FIFO to empty */
- r = change_mode (port, ECR_PS2);
- if (r != -EBUSY) {
+ r = change_mode(port, ECR_PS2);
+ if (r != -EBUSY)
break;
- }
- } while (time_before (jiffies, expire));
+ } while (time_before(jiffies, expire));
if (r == -EBUSY) {
- printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+ printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
/* Prevent further data transfer. */
- frob_set_mode (port, ECR_TST);
+ frob_set_mode(port, ECR_TST);
/* Adjust for the contents of the FIFO. */
for (written -= priv->fifo_depth; ; written++) {
- if (inb (ECONTROL (port)) & 0x2) {
+ if (inb(ECONTROL(port)) & 0x2) {
/* Full up. */
break;
}
- outb (0, FIFO (port));
+ outb(0, FIFO(port));
}
/* Reset the FIFO and return to PS2 mode. */
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_PS2);
}
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
if (r)
- printk (KERN_DEBUG
- "%s: BUSY timeout (%d) in compat_write_block_pio\n",
+ printk(KERN_DEBUG
+ "%s: BUSY timeout (%d) in compat_write_block_pio\n",
port->name, r);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
@@ -818,7 +828,7 @@
/* ECP */
#ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+static size_t parport_pc_ecp_write_block_pio(struct parport *port,
const void *buf, size_t length,
int flags)
{
@@ -830,36 +840,38 @@
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_write_data (port, buf,
+ return parport_ieee1284_ecp_write_data(port, buf,
length, flags);
/* Switch to forward mode if necessary. */
if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
/* Event 47: Set nInit high. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD);
/* Event 49: PError goes high. */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- printk (KERN_DEBUG "%s: PError timeout (%d) "
+ printk(KERN_DEBUG "%s: PError timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
}
}
/* Set up ECP parallel port mode.*/
- parport_pc_data_forward (port); /* Must be in PS2 mode */
- parport_pc_frob_control (port,
+ parport_pc_data_forward(port); /* Must be in PS2 mode */
+ parport_pc_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD,
0);
- r = change_mode (port, ECR_ECP); /* ECP FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+ r = change_mode(port, ECR_ECP); /* ECP FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+ port->name);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
/* Write the data to the FIFO. */
@@ -873,55 +885,54 @@
expire = jiffies + (priv->fifo_depth * (HZ * 4));
do {
/* Wait for the FIFO to empty */
- r = change_mode (port, ECR_PS2);
- if (r != -EBUSY) {
+ r = change_mode(port, ECR_PS2);
+ if (r != -EBUSY)
break;
- }
- } while (time_before (jiffies, expire));
+ } while (time_before(jiffies, expire));
if (r == -EBUSY) {
- printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+ printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
/* Prevent further data transfer. */
- frob_set_mode (port, ECR_TST);
+ frob_set_mode(port, ECR_TST);
/* Adjust for the contents of the FIFO. */
for (written -= priv->fifo_depth; ; written++) {
- if (inb (ECONTROL (port)) & 0x2) {
+ if (inb(ECONTROL(port)) & 0x2) {
/* Full up. */
break;
}
- outb (0, FIFO (port));
+ outb(0, FIFO(port));
}
/* Reset the FIFO and return to PS2 mode. */
- frob_set_mode (port, ECR_PS2);
+ frob_set_mode(port, ECR_PS2);
/* Host transfer recovery. */
- parport_pc_data_reverse (port); /* Must be in PS2 mode */
- udelay (5);
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
- r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+ parport_pc_data_reverse(port); /* Must be in PS2 mode */
+ udelay(5);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+ r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
if (r)
- printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+ printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
- if (r)
- printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+ if (r)
+ printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
"in ecp_write_block_pio\n", port->name, r);
}
- r = parport_wait_peripheral (port,
- PARPORT_STATUS_BUSY,
+ r = parport_wait_peripheral(port,
+ PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
- if(r)
- printk (KERN_DEBUG
+ if (r)
+ printk(KERN_DEBUG
"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
port->name, r);
@@ -931,7 +942,7 @@
}
#if 0
-static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+static size_t parport_pc_ecp_read_block_pio(struct parport *port,
void *buf, size_t length,
int flags)
{
@@ -944,13 +955,13 @@
char *bufp = buf;
port = port->physport;
-DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-dump_parport_state ("enter fcn", port);
+DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+dump_parport_state("enter fcn", port);
/* Special case: a timeout of zero means we cannot call schedule().
* Also if O_NONBLOCK is set then use the default implementation. */
if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data (port, buf,
+ return parport_ieee1284_ecp_read_data(port, buf,
length, flags);
if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
@@ -966,173 +977,177 @@
* go through software emulation. Otherwise we may have to throw
* away data. */
if (length < fifofull)
- return parport_ieee1284_ecp_read_data (port, buf,
+ return parport_ieee1284_ecp_read_data(port, buf,
length, flags);
if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
/* change to reverse-idle phase (must be in forward-idle) */
/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD
| PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse (port); /* Must be in PS2 mode */
- udelay (5);
+ parport_pc_data_reverse(port); /* Must be in PS2 mode */
+ udelay(5);
/* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT,
0);
/* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+ r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+ if (r) {
+ printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
"in ecp_read_block_pio\n", port->name, r);
return 0;
}
}
/* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control (port,
+/* parport_pc_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD); */
- r = change_mode (port, ECR_ECP); /* ECP FIFO */
- if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+ r = change_mode(port, ECR_ECP); /* ECP FIFO */
+ if (r)
+ printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+ port->name);
port->ieee1284.phase = IEEE1284_PH_REV_DATA;
/* the first byte must be collected manually */
-dump_parport_state ("pre 43", port);
+ dump_parport_state("pre 43", port);
/* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+ r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
if (r) {
/* timed out while reading -- no data */
- printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+ printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
goto out_no_data;
}
/* read byte */
- *bufp++ = inb (DATA (port));
+ *bufp++ = inb(DATA(port));
left--;
-dump_parport_state ("43-44", port);
+ dump_parport_state("43-44", port);
/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control (port,
+ parport_pc_frob_control(port,
PARPORT_CONTROL_AUTOFD,
0);
-dump_parport_state ("pre 45", port);
+ dump_parport_state("pre 45", port);
/* Event 45: Wait for nAck to go high */
-/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
-dump_parport_state ("post 45", port);
-r = 0;
+ /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
+ PARPORT_STATUS_ACK); */
+ dump_parport_state("post 45", port);
+ r = 0;
if (r) {
/* timed out while waiting for peripheral to respond to ack */
- printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+ printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
/* keep hold of the byte we've got already */
goto out_no_data;
}
/* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control (port,
+ parport_pc_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
-dump_parport_state ("rev idle", port);
+ dump_parport_state("rev idle", port);
/* Do the transfer. */
while (left > fifofull) {
int ret;
unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb (ECONTROL (port));
+ unsigned char ecrval = inb(ECONTROL(port));
- if (need_resched() && time_before (jiffies, expire))
+ if (need_resched() && time_before(jiffies, expire))
/* Can't yield the port. */
- schedule ();
+ schedule();
/* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
+ * that case ECP is already holding back the
+ * peripheral (assuming proper design) with a delayed
+ * handshake. Work fast to avoid a peripheral
+ * timeout. */
if (ecrval & 0x01) {
/* FIFO is empty. Wait for interrupt. */
-dump_parport_state ("FIFO empty", port);
+ dump_parport_state("FIFO empty", port);
/* Anyone else waiting for the port? */
if (port->waithead) {
- printk (KERN_DEBUG "Somebody wants the port\n");
+ printk(KERN_DEBUG "Somebody wants the port\n");
break;
}
/* Clear serviceIntr */
- ECR_WRITE (port, ecrval & ~(1<<2));
- false_alarm:
-dump_parport_state ("waiting", port);
- ret = parport_wait_event (port, HZ);
-DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+ ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+ dump_parport_state("waiting", port);
+ ret = parport_wait_event(port, HZ);
+ DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
+ ret);
if (ret < 0)
break;
ret = 0;
- if (!time_before (jiffies, expire)) {
+ if (!time_before(jiffies, expire)) {
/* Timed out. */
-dump_parport_state ("timeout", port);
- printk (KERN_DEBUG "PIO read timed out\n");
+ dump_parport_state("timeout", port);
+ printk(KERN_DEBUG "PIO read timed out\n");
break;
}
- ecrval = inb (ECONTROL (port));
+ ecrval = inb(ECONTROL(port));
if (!(ecrval & (1<<2))) {
if (need_resched() &&
- time_before (jiffies, expire)) {
- schedule ();
+ time_before(jiffies, expire)) {
+ schedule();
}
goto false_alarm;
}
/* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
+ * set, how long interrupt service took, and
+ * how fast the peripheral is, we might be
+ * lucky and have a just filled FIFO. */
continue;
}
if (ecrval & 0x02) {
/* FIFO is full. */
-dump_parport_state ("FIFO full", port);
- insb (fifo, bufp, fifo_depth);
+dump_parport_state("FIFO full", port);
+ insb(fifo, bufp, fifo_depth);
bufp += fifo_depth;
left -= fifo_depth;
continue;
}
-DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
/* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb (fifo);
+ * and either the peripheral will fill it faster,
+ * tripping a fast empty with insb, or we empty it. */
+ *bufp++ = inb(fifo);
left--;
}
/* scoop up anything left in the FIFO */
- while (left && !(inb (ECONTROL (port) & 0x01))) {
- *bufp++ = inb (fifo);
+ while (left && !(inb(ECONTROL(port) & 0x01))) {
+ *bufp++ = inb(fifo);
left--;
}
port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-dump_parport_state ("rev idle2", port);
+dump_parport_state("rev idle2", port);
out_no_data:
/* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
/* event 49: PError goes high */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
port->name, r);
}
@@ -1141,14 +1156,14 @@
/* Finish up. */
{
- int lost = get_fifo_residue (port);
+ int lost = get_fifo_residue(port);
if (lost)
/* Shouldn't happen with compliant peripherals. */
- printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+ printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
port->name, lost);
}
-dump_parport_state ("fwd idle", port);
+dump_parport_state("fwd idle", port);
return length - left;
}
#endif /* 0 */
@@ -1164,8 +1179,7 @@
/* GCC is not inlining extern inline function later overwriten to non-inline,
so we use outlined_ variants here. */
-static const struct parport_operations parport_pc_ops =
-{
+static const struct parport_operations parport_pc_ops = {
.write_data = parport_pc_write_data,
.read_data = parport_pc_read_data,
@@ -1205,46 +1219,52 @@
/* Super-IO chipset detection, Winbond, SMSC */
static void __devinit show_parconfig_smsc37c669(int io, int key)
{
- int cr1,cr4,cra,cr23,cr26,cr27,i=0;
- static const char *const modes[]={
+ int cr1, cr4, cra, cr23, cr26, cr27, i = 0;
+ static const char *const modes[] = {
"SPP and Bidirectional (PS/2)",
"EPP and SPP",
"ECP",
"ECP and EPP" };
- outb(key,io);
- outb(key,io);
- outb(1,io);
- cr1=inb(io+1);
- outb(4,io);
- cr4=inb(io+1);
- outb(0x0a,io);
- cra=inb(io+1);
- outb(0x23,io);
- cr23=inb(io+1);
- outb(0x26,io);
- cr26=inb(io+1);
- outb(0x27,io);
- cr27=inb(io+1);
- outb(0xaa,io);
+ outb(key, io);
+ outb(key, io);
+ outb(1, io);
+ cr1 = inb(io + 1);
+ outb(4, io);
+ cr4 = inb(io + 1);
+ outb(0x0a, io);
+ cra = inb(io + 1);
+ outb(0x23, io);
+ cr23 = inb(io + 1);
+ outb(0x26, io);
+ cr26 = inb(io + 1);
+ outb(0x27, io);
+ cr27 = inb(io + 1);
+ outb(0xaa, io);
if (verbose_probing) {
- printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+ printk(KERN_INFO
+ "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
- cr1,cr4,cra,cr23,cr26,cr27);
-
+ cr1, cr4, cra, cr23, cr26, cr27);
+
/* The documentation calls DMA and IRQ-Lines by letters, so
the board maker can/will wire them
appropriately/randomly... G=reserved H=IDE-irq, */
- printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
- "fifo threshold=%d\n", cr23*4,
- (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
- (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+ printk(KERN_INFO
+ "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+ cr23 * 4,
+ (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+ (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+ cra & 0x0f);
printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
- (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
- printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
- (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03],
- (cr4 & 0x40) ? "1.7" : "1.9");
+ (cr23 * 4 >= 0x100) ? "yes" : "no",
+ (cr1 & 4) ? "yes" : "no");
+ printk(KERN_INFO
+ "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+ (cr1 & 0x08) ? "Standard mode only (SPP)"
+ : modes[cr4 & 0x03],
+ (cr4 & 0x40) ? "1.7" : "1.9");
}
/* Heuristics ! BIOS setup for this mainboard device limits
@@ -1258,32 +1278,32 @@
printk(KERN_INFO "Super-IO: too many chips!\n");
} else {
int d;
- switch (cr23*4) {
- case 0x3bc:
- superios[i].io = 0x3bc;
- superios[i].irq = 7;
- break;
- case 0x378:
- superios[i].io = 0x378;
- superios[i].irq = 7;
- break;
- case 0x278:
- superios[i].io = 0x278;
- superios[i].irq = 5;
+ switch (cr23 * 4) {
+ case 0x3bc:
+ superios[i].io = 0x3bc;
+ superios[i].irq = 7;
+ break;
+ case 0x378:
+ superios[i].io = 0x378;
+ superios[i].irq = 7;
+ break;
+ case 0x278:
+ superios[i].io = 0x278;
+ superios[i].irq = 5;
}
- d=(cr26 &0x0f);
- if((d==1) || (d==3))
- superios[i].dma= d;
+ d = (cr26 & 0x0f);
+ if (d == 1 || d == 3)
+ superios[i].dma = d;
else
- superios[i].dma= PARPORT_DMA_NONE;
+ superios[i].dma = PARPORT_DMA_NONE;
}
- }
+ }
}
static void __devinit show_parconfig_winbond(int io, int key)
{
- int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+ int cr30, cr60, cr61, cr70, cr74, crf0, i = 0;
static const char *const modes[] = {
"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
"EPP-1.9 and SPP",
@@ -1296,40 +1316,43 @@
static char *const irqtypes[] = {
"pulsed low, high-Z",
"follows nACK" };
-
+
/* The registers are called compatible-PnP because the
- register layout is modelled after ISA-PnP, the access
- method is just another ... */
- outb(key,io);
- outb(key,io);
- outb(0x07,io); /* Register 7: Select Logical Device */
- outb(0x01,io+1); /* LD1 is Parallel Port */
- outb(0x30,io);
- cr30=inb(io+1);
- outb(0x60,io);
- cr60=inb(io+1);
- outb(0x61,io);
- cr61=inb(io+1);
- outb(0x70,io);
- cr70=inb(io+1);
- outb(0x74,io);
- cr74=inb(io+1);
- outb(0xf0,io);
- crf0=inb(io+1);
- outb(0xaa,io);
+ register layout is modelled after ISA-PnP, the access
+ method is just another ... */
+ outb(key, io);
+ outb(key, io);
+ outb(0x07, io); /* Register 7: Select Logical Device */
+ outb(0x01, io + 1); /* LD1 is Parallel Port */
+ outb(0x30, io);
+ cr30 = inb(io + 1);
+ outb(0x60, io);
+ cr60 = inb(io + 1);
+ outb(0x61, io);
+ cr61 = inb(io + 1);
+ outb(0x70, io);
+ cr70 = inb(io + 1);
+ outb(0x74, io);
+ cr74 = inb(io + 1);
+ outb(0xf0, io);
+ crf0 = inb(io + 1);
+ outb(0xaa, io);
if (verbose_probing) {
- printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
- "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
- printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
- (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+ printk(KERN_INFO
+ "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+ cr30, cr60, cr61, cr70, cr74, crf0);
+ printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+ (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
if ((cr74 & 0x07) > 3)
printk("dma=none\n");
else
- printk("dma=%d\n",cr74 & 0x07);
- printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
- irqtypes[crf0>>7], (crf0>>3)&0x0f);
- printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+ printk("dma=%d\n", cr74 & 0x07);
+ printk(KERN_INFO
+ "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+ irqtypes[crf0>>7], (crf0>>3)&0x0f);
+ printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
+ modes[crf0 & 0x07]);
}
if (cr30 & 0x01) { /* the settings can be interrogated later ... */
@@ -1346,60 +1369,82 @@
}
}
-static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+static void __devinit decode_winbond(int efer, int key, int devid,
+ int devrev, int oldid)
{
const char *type = "unknown";
- int id,progif=2;
+ int id, progif = 2;
if (devid == devrev)
/* simple heuristics, we happened to read some
- non-winbond register */
+ non-winbond register */
return;
- id=(devid<<8) | devrev;
+ id = (devid << 8) | devrev;
/* Values are from public data sheets pdf files, I can just
- confirm 83977TF is correct :-) */
- if (id == 0x9771) type="83977F/AF";
- else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
- else if (id == 0x9774) type="83977ATF";
- else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
- else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
- else if ((id & ~0x0f) == 0x5210) type="83627";
- else if ((id & ~0x0f) == 0x6010) type="83697HF";
- else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
- else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
- else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
- else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
- else progif=0;
+ confirm 83977TF is correct :-) */
+ if (id == 0x9771)
+ type = "83977F/AF";
+ else if (id == 0x9773)
+ type = "83977TF / SMSC 97w33x/97w34x";
+ else if (id == 0x9774)
+ type = "83977ATF";
+ else if ((id & ~0x0f) == 0x5270)
+ type = "83977CTF / SMSC 97w36x";
+ else if ((id & ~0x0f) == 0x52f0)
+ type = "83977EF / SMSC 97w35x";
+ else if ((id & ~0x0f) == 0x5210)
+ type = "83627";
+ else if ((id & ~0x0f) == 0x6010)
+ type = "83697HF";
+ else if ((oldid & 0x0f) == 0x0a) {
+ type = "83877F";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0b) {
+ type = "83877AF";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0c) {
+ type = "83877TF";
+ progif = 1;
+ } else if ((oldid & 0x0f) == 0x0d) {
+ type = "83877ATF";
+ progif = 1;
+ } else
+ progif = 0;
if (verbose_probing)
printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
- "devid=%02x devrev=%02x oldid=%02x type=%s\n",
+ "devid=%02x devrev=%02x oldid=%02x type=%s\n",
efer, key, devid, devrev, oldid, type);
if (progif == 2)
- show_parconfig_winbond(efer,key);
+ show_parconfig_winbond(efer, key);
}
static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
{
- const char *type = "unknown";
+ const char *type = "unknown";
void (*func)(int io, int key);
- int id;
+ int id;
- if (devid == devrev)
+ if (devid == devrev)
/* simple heuristics, we happened to read some
- non-smsc register */
+ non-smsc register */
return;
- func=NULL;
- id=(devid<<8) | devrev;
+ func = NULL;
+ id = (devid << 8) | devrev;
- if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
- else if (id==0x6582) type="37c665IR";
- else if (devid==0x65) type="37c665GT";
- else if (devid==0x66) type="37c666GT";
+ if (id == 0x0302) {
+ type = "37c669";
+ func = show_parconfig_smsc37c669;
+ } else if (id == 0x6582)
+ type = "37c665IR";
+ else if (devid == 0x65)
+ type = "37c665GT";
+ else if (devid == 0x66)
+ type = "37c666GT";
if (verbose_probing)
printk(KERN_INFO "SMSC chip at EFER=0x%x "
@@ -1407,138 +1452,138 @@
efer, key, devid, devrev, type);
if (func)
- func(efer,key);
+ func(efer, key);
}
static void __devinit winbond_check(int io, int key)
{
- int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+ int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
/* First probe without key */
- outb(0x20,io);
- x_devid=inb(io+1);
- outb(0x21,io);
- x_devrev=inb(io+1);
- outb(0x09,io);
- x_oldid=inb(io+1);
+ outb(0x20, io);
+ x_devid = inb(io + 1);
+ outb(0x21, io);
+ x_devrev = inb(io + 1);
+ outb(0x09, io);
+ x_oldid = inb(io + 1);
- outb(key,io);
- outb(key,io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
- outb(0x20,io); /* Write EFIR, extended function index register */
- devid=inb(io+1); /* Read EFDR, extended function data register */
- outb(0x21,io);
- devrev=inb(io+1);
- outb(0x09,io);
- oldid=inb(io+1);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io);
+ outb(key, io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x20, io); /* Write EFIR, extended function index register */
+ devid = inb(io + 1); /* Read EFDR, extended function data register */
+ outb(0x21, io);
+ devrev = inb(io + 1);
+ outb(0x09, io);
+ oldid = inb(io + 1);
+ outb(0xaa, io); /* Magic Seal */
if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
goto out; /* protection against false positives */
- decode_winbond(io,key,devid,devrev,oldid);
+ decode_winbond(io, key, devid, devrev, oldid);
out:
release_region(io, 3);
}
-static void __devinit winbond_check2(int io,int key)
+static void __devinit winbond_check2(int io, int key)
{
- int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+ int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
/* First probe without the key */
- outb(0x20,io+2);
- x_devid=inb(io+2);
- outb(0x21,io+1);
- x_devrev=inb(io+2);
- outb(0x09,io+1);
- x_oldid=inb(io+2);
+ outb(0x20, io + 2);
+ x_devid = inb(io + 2);
+ outb(0x21, io + 1);
+ x_devrev = inb(io + 2);
+ outb(0x09, io + 1);
+ x_oldid = inb(io + 2);
- outb(key,io); /* Write Magic Byte to EFER, extended
- funtion enable register */
- outb(0x20,io+2); /* Write EFIR, extended function index register */
- devid=inb(io+2); /* Read EFDR, extended function data register */
- outb(0x21,io+1);
- devrev=inb(io+2);
- outb(0x09,io+1);
- oldid=inb(io+2);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io); /* Write Magic Byte to EFER, extended
+ funtion enable register */
+ outb(0x20, io + 2); /* Write EFIR, extended function index register */
+ devid = inb(io + 2); /* Read EFDR, extended function data register */
+ outb(0x21, io + 1);
+ devrev = inb(io + 2);
+ outb(0x09, io + 1);
+ oldid = inb(io + 2);
+ outb(0xaa, io); /* Magic Seal */
- if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+ if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
goto out; /* protection against false positives */
- decode_winbond(io,key,devid,devrev,oldid);
+ decode_winbond(io, key, devid, devrev, oldid);
out:
release_region(io, 3);
}
static void __devinit smsc_check(int io, int key)
{
- int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+ int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
if (!request_region(io, 3, __func__))
return;
/* First probe without the key */
- outb(0x0d,io);
- x_oldid=inb(io+1);
- outb(0x0e,io);
- x_oldrev=inb(io+1);
- outb(0x20,io);
- x_id=inb(io+1);
- outb(0x21,io);
- x_rev=inb(io+1);
+ outb(0x0d, io);
+ x_oldid = inb(io + 1);
+ outb(0x0e, io);
+ x_oldrev = inb(io + 1);
+ outb(0x20, io);
+ x_id = inb(io + 1);
+ outb(0x21, io);
+ x_rev = inb(io + 1);
- outb(key,io);
- outb(key,io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
- outb(0x0d,io); /* Write EFIR, extended function index register */
- oldid=inb(io+1); /* Read EFDR, extended function data register */
- outb(0x0e,io);
- oldrev=inb(io+1);
- outb(0x20,io);
- id=inb(io+1);
- outb(0x21,io);
- rev=inb(io+1);
- outb(0xaa,io); /* Magic Seal */
+ outb(key, io);
+ outb(key, io); /* Write Magic Sequence to EFER, extended
+ funtion enable register */
+ outb(0x0d, io); /* Write EFIR, extended function index register */
+ oldid = inb(io + 1); /* Read EFDR, extended function data register */
+ outb(0x0e, io);
+ oldrev = inb(io + 1);
+ outb(0x20, io);
+ id = inb(io + 1);
+ outb(0x21, io);
+ rev = inb(io + 1);
+ outb(0xaa, io); /* Magic Seal */
- if ((x_id == id) && (x_oldrev == oldrev) &&
- (x_oldid == oldid) && (x_rev == rev))
+ if (x_id == id && x_oldrev == oldrev &&
+ x_oldid == oldid && x_rev == rev)
goto out; /* protection against false positives */
- decode_smsc(io,key,oldid,oldrev);
+ decode_smsc(io, key, oldid, oldrev);
out:
release_region(io, 3);
}
-static void __devinit detect_and_report_winbond (void)
-{
+static void __devinit detect_and_report_winbond(void)
+{
if (verbose_probing)
printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
- winbond_check(0x3f0,0x87);
- winbond_check(0x370,0x87);
- winbond_check(0x2e ,0x87);
- winbond_check(0x4e ,0x87);
- winbond_check(0x3f0,0x86);
- winbond_check2(0x250,0x88);
- winbond_check2(0x250,0x89);
+ winbond_check(0x3f0, 0x87);
+ winbond_check(0x370, 0x87);
+ winbond_check(0x2e , 0x87);
+ winbond_check(0x4e , 0x87);
+ winbond_check(0x3f0, 0x86);
+ winbond_check2(0x250, 0x88);
+ winbond_check2(0x250, 0x89);
}
-static void __devinit detect_and_report_smsc (void)
+static void __devinit detect_and_report_smsc(void)
{
if (verbose_probing)
printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
- smsc_check(0x3f0,0x55);
- smsc_check(0x370,0x55);
- smsc_check(0x3f0,0x44);
- smsc_check(0x370,0x44);
+ smsc_check(0x3f0, 0x55);
+ smsc_check(0x370, 0x55);
+ smsc_check(0x3f0, 0x44);
+ smsc_check(0x370, 0x44);
}
static void __devinit detect_and_report_it87(void)
@@ -1573,7 +1618,7 @@
}
#endif /* CONFIG_PARPORT_PC_SUPERIO */
-static int get_superio_dma (struct parport *p)
+static int get_superio_dma(struct parport *p)
{
int i = 0;
@@ -1584,15 +1629,15 @@
return PARPORT_DMA_NONE;
}
-static int get_superio_irq (struct parport *p)
+static int get_superio_irq(struct parport *p)
{
int i = 0;
- while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
- i++;
- if (i != NR_SUPERIOS)
- return superios[i].irq;
- return PARPORT_IRQ_NONE;
+ while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
+ i++;
+ if (i != NR_SUPERIOS)
+ return superios[i].irq;
+ return PARPORT_IRQ_NONE;
}
@@ -1600,9 +1645,9 @@
/*
* Checks for port existence, all ports support SPP MODE
- * Returns:
+ * Returns:
* 0 : No parallel port at this address
- * PARPORT_MODE_PCSPP : SPP port detected
+ * PARPORT_MODE_PCSPP : SPP port detected
* (if the user specified an ioport himself,
* this shall always be the case!)
*
@@ -1612,7 +1657,7 @@
unsigned char r, w;
/*
- * first clear an eventually pending EPP timeout
+ * first clear an eventually pending EPP timeout
* I (sailer@ife.ee.ethz.ch) have an SMSC chipset
* that does not even respond to SPP cycles if an EPP
* timeout is pending
@@ -1621,19 +1666,19 @@
/* Do a simple read-write test to make sure the port exists. */
w = 0xc;
- outb (w, CONTROL (pb));
+ outb(w, CONTROL(pb));
/* Is there a control register that we can read from? Some
* ports don't allow reads, so read_control just returns a
* software copy. Some ports _do_ allow reads, so bypass the
* software copy here. In addition, some bits aren't
* writable. */
- r = inb (CONTROL (pb));
+ r = inb(CONTROL(pb));
if ((r & 0xf) == w) {
w = 0xe;
- outb (w, CONTROL (pb));
- r = inb (CONTROL (pb));
- outb (0xc, CONTROL (pb));
+ outb(w, CONTROL(pb));
+ r = inb(CONTROL(pb));
+ outb(0xc, CONTROL(pb));
if ((r & 0xf) == w)
return PARPORT_MODE_PCSPP;
}
@@ -1641,18 +1686,18 @@
if (user_specified)
/* That didn't work, but the user thinks there's a
* port here. */
- printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+ printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
/* Try the data register. The data lines aren't tri-stated at
* this stage, so we expect back what we wrote. */
w = 0xaa;
- parport_pc_write_data (pb, w);
- r = parport_pc_read_data (pb);
+ parport_pc_write_data(pb, w);
+ r = parport_pc_read_data(pb);
if (r == w) {
w = 0x55;
- parport_pc_write_data (pb, w);
- r = parport_pc_read_data (pb);
+ parport_pc_write_data(pb, w);
+ r = parport_pc_read_data(pb);
if (r == w)
return PARPORT_MODE_PCSPP;
}
@@ -1660,9 +1705,9 @@
if (user_specified) {
/* Didn't work, but the user is convinced this is the
* place. */
- printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+ printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
- printk (KERN_INFO "parport 0x%lx: You gave this address, "
+ printk(KERN_INFO "parport 0x%lx: You gave this address, "
"but there is probably no parallel port there!\n",
pb->base);
}
@@ -1693,33 +1738,33 @@
struct parport_pc_private *priv = pb->private_data;
unsigned char r = 0xc;
- outb (r, CONTROL (pb));
- if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
- outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+ outb(r, CONTROL(pb));
+ if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) {
+ outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */
- r = inb (CONTROL (pb));
- if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+ r = inb(CONTROL(pb));
+ if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2))
goto no_reg; /* Sure that no ECR register exists */
}
-
- if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+
+ if ((inb(ECONTROL(pb)) & 0x3) != 0x1)
goto no_reg;
- ECR_WRITE (pb, 0x34);
- if (inb (ECONTROL (pb)) != 0x35)
+ ECR_WRITE(pb, 0x34);
+ if (inb(ECONTROL(pb)) != 0x35)
goto no_reg;
priv->ecr = 1;
- outb (0xc, CONTROL (pb));
-
+ outb(0xc, CONTROL(pb));
+
/* Go to mode 000 */
- frob_set_mode (pb, ECR_SPP);
+ frob_set_mode(pb, ECR_SPP);
return 1;
no_reg:
- outb (0xc, CONTROL (pb));
- return 0;
+ outb(0xc, CONTROL(pb));
+ return 0;
}
#ifdef CONFIG_PARPORT_1284
@@ -1729,7 +1774,7 @@
* allows us to read data from the data lines. In theory we would get back
* 0xff but any peripheral attached to the port may drag some or all of the
* lines down to zero. So if we get back anything that isn't the contents
- * of the data register we deem PS/2 support to be present.
+ * of the data register we deem PS/2 support to be present.
*
* Some SPP ports have "half PS/2" ability - you can't turn off the line
* drivers, but an external peripheral with sufficiently beefy drivers of
@@ -1737,26 +1782,28 @@
* where they can then be read back as normal. Ports with this property
* and the right type of device attached are likely to fail the SPP test,
* (as they will appear to have stuck bits) and so the fact that they might
- * be misdetected here is rather academic.
+ * be misdetected here is rather academic.
*/
static int parport_PS2_supported(struct parport *pb)
{
int ok = 0;
-
+
clear_epp_timeout(pb);
/* try to tri-state the buffer */
- parport_pc_data_reverse (pb);
-
+ parport_pc_data_reverse(pb);
+
parport_pc_write_data(pb, 0x55);
- if (parport_pc_read_data(pb) != 0x55) ok++;
+ if (parport_pc_read_data(pb) != 0x55)
+ ok++;
parport_pc_write_data(pb, 0xaa);
- if (parport_pc_read_data(pb) != 0xaa) ok++;
+ if (parport_pc_read_data(pb) != 0xaa)
+ ok++;
/* cancel input mode */
- parport_pc_data_forward (pb);
+ parport_pc_data_forward(pb);
if (ok) {
pb->modes |= PARPORT_MODE_TRISTATE;
@@ -1775,68 +1822,68 @@
int config, configb;
int pword;
struct parport_pc_private *priv = pb->private_data;
- /* Translate ECP intrLine to ISA irq value */
- static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 };
+ /* Translate ECP intrLine to ISA irq value */
+ static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 };
/* If there is no ECR, we have no hope of supporting ECP. */
if (!priv->ecr)
return 0;
/* Find out FIFO depth */
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
- for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
- outb (0xaa, FIFO (pb));
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */
+ for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++)
+ outb(0xaa, FIFO(pb));
/*
* Using LGS chipset it uses ECR register, but
* it doesn't support ECP or FIFO MODE
*/
if (i == 1024) {
- ECR_WRITE (pb, ECR_SPP << 5);
+ ECR_WRITE(pb, ECR_SPP << 5);
return 0;
}
priv->fifo_depth = i;
if (verbose_probing)
- printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+ printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
/* Find out writeIntrThreshold */
- frob_econtrol (pb, 1<<2, 1<<2);
- frob_econtrol (pb, 1<<2, 0);
+ frob_econtrol(pb, 1<<2, 1<<2);
+ frob_econtrol(pb, 1<<2, 0);
for (i = 1; i <= priv->fifo_depth; i++) {
- inb (FIFO (pb));
- udelay (50);
- if (inb (ECONTROL (pb)) & (1<<2))
+ inb(FIFO(pb));
+ udelay(50);
+ if (inb(ECONTROL(pb)) & (1<<2))
break;
}
if (i <= priv->fifo_depth) {
if (verbose_probing)
- printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+ printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
pb->base, i);
} else
/* Number of bytes we know we can write if we get an
- interrupt. */
+ interrupt. */
i = 0;
priv->writeIntrThreshold = i;
/* Find out readIntrThreshold */
- frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
- parport_pc_data_reverse (pb); /* Must be in PS2 mode */
- frob_set_mode (pb, ECR_TST); /* Test FIFO */
- frob_econtrol (pb, 1<<2, 1<<2);
- frob_econtrol (pb, 1<<2, 0);
+ frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+ parport_pc_data_reverse(pb); /* Must be in PS2 mode */
+ frob_set_mode(pb, ECR_TST); /* Test FIFO */
+ frob_econtrol(pb, 1<<2, 1<<2);
+ frob_econtrol(pb, 1<<2, 0);
for (i = 1; i <= priv->fifo_depth; i++) {
- outb (0xaa, FIFO (pb));
- if (inb (ECONTROL (pb)) & (1<<2))
+ outb(0xaa, FIFO(pb));
+ if (inb(ECONTROL(pb)) & (1<<2))
break;
}
if (i <= priv->fifo_depth) {
if (verbose_probing)
- printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+ printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
pb->base, i);
} else
/* Number of bytes we can read if we get an interrupt. */
@@ -1844,23 +1891,23 @@
priv->readIntrThreshold = i;
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, 0xf4); /* Configuration mode */
- config = inb (CONFIGA (pb));
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, 0xf4); /* Configuration mode */
+ config = inb(CONFIGA(pb));
pword = (config >> 4) & 0x7;
switch (pword) {
case 0:
pword = 2;
- printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
pb->base);
break;
case 2:
pword = 4;
- printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+ printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
pb->base);
break;
default:
- printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+ printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
pb->base);
/* Assume 1 */
case 1:
@@ -1869,28 +1916,29 @@
priv->pword = pword;
if (verbose_probing) {
- printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
-
- printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+ printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+ pb->base, 8 * pword);
+
+ printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
config & 0x80 ? "Level" : "Pulses");
- configb = inb (CONFIGB (pb));
- printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+ configb = inb(CONFIGB(pb));
+ printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
pb->base, config, configb);
- printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
- if ((configb >>3) & 0x07)
- printk("%d",intrline[(configb >>3) & 0x07]);
+ printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+ if ((configb >> 3) & 0x07)
+ printk("%d", intrline[(configb >> 3) & 0x07]);
else
printk("<none or set by other means>");
- printk (" dma=");
- if( (configb & 0x03 ) == 0x00)
+ printk(" dma=");
+ if ((configb & 0x03) == 0x00)
printk("<none or set by other means>\n");
else
- printk("%d\n",configb & 0x07);
+ printk("%d\n", configb & 0x07);
}
/* Go back to mode 000 */
- frob_set_mode (pb, ECR_SPP);
+ frob_set_mode(pb, ECR_SPP);
return 1;
}
@@ -1905,10 +1953,10 @@
if (!priv->ecr)
return 0;
- oecr = inb (ECONTROL (pb));
- ECR_WRITE (pb, ECR_PS2 << 5);
+ oecr = inb(ECONTROL(pb));
+ ECR_WRITE(pb, ECR_PS2 << 5);
result = parport_PS2_supported(pb);
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
return result;
}
@@ -1932,16 +1980,15 @@
*/
/* If EPP timeout bit clear then EPP available */
- if (!clear_epp_timeout(pb)) {
+ if (!clear_epp_timeout(pb))
return 0; /* No way to clear timeout */
- }
/* Check for Intel bug. */
if (priv->ecr) {
unsigned char i;
for (i = 0x00; i < 0x80; i += 0x20) {
- ECR_WRITE (pb, i);
- if (clear_epp_timeout (pb)) {
+ ECR_WRITE(pb, i);
+ if (clear_epp_timeout(pb)) {
/* Phony EPP in ECP. */
return 0;
}
@@ -1965,17 +2012,16 @@
int result;
unsigned char oecr;
- if (!priv->ecr) {
+ if (!priv->ecr)
return 0;
- }
- oecr = inb (ECONTROL (pb));
+ oecr = inb(ECONTROL(pb));
/* Search for SMC style EPP+ECP mode */
- ECR_WRITE (pb, 0x80);
- outb (0x04, CONTROL (pb));
+ ECR_WRITE(pb, 0x80);
+ outb(0x04, CONTROL(pb));
result = parport_EPP_supported(pb);
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
if (result) {
/* Set up access functions to use ECP+EPP hardware. */
@@ -1993,11 +2039,25 @@
/* Don't bother probing for modes we know we won't use. */
static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
#ifdef CONFIG_PARPORT_PC_FIFO
-static int parport_ECP_supported(struct parport *pb) { return 0; }
+static int parport_ECP_supported(struct parport *pb)
+{
+ return 0;
+}
#endif
-static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
-static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
-static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+ return 0;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+ return 0;
+}
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+ return 0;
+}
#endif /* No IEEE 1284 support */
@@ -2007,17 +2067,17 @@
static int programmable_irq_support(struct parport *pb)
{
int irq, intrLine;
- unsigned char oecr = inb (ECONTROL (pb));
+ unsigned char oecr = inb(ECONTROL(pb));
static const int lookup[8] = {
PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
};
- ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+ ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */
- intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+ intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07;
irq = lookup[intrLine];
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
return irq;
}
@@ -2027,17 +2087,17 @@
unsigned long irqs;
irqs = probe_irq_on();
-
- ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
- ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
- ECR_WRITE (pb, ECR_TST << 5);
+
+ ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+ ECR_WRITE(pb, (ECR_TST << 5) | 0x04);
+ ECR_WRITE(pb, ECR_TST << 5);
/* If Full FIFO sure that writeIntrThreshold is generated */
- for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++)
- outb (0xaa, FIFO (pb));
-
+ for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++)
+ outb(0xaa, FIFO(pb));
+
pb->irq = probe_irq_off(irqs);
- ECR_WRITE (pb, ECR_SPP << 5);
+ ECR_WRITE(pb, ECR_SPP << 5);
if (pb->irq <= 0)
pb->irq = PARPORT_IRQ_NONE;
@@ -2047,7 +2107,7 @@
/*
* This detection seems that only works in National Semiconductors
- * This doesn't work in SMC, LGS, and Winbond
+ * This doesn't work in SMC, LGS, and Winbond
*/
static int irq_probe_EPP(struct parport *pb)
{
@@ -2058,16 +2118,16 @@
unsigned char oecr;
if (pb->modes & PARPORT_MODE_PCECR)
- oecr = inb (ECONTROL (pb));
+ oecr = inb(ECONTROL(pb));
irqs = probe_irq_on();
if (pb->modes & PARPORT_MODE_PCECR)
- frob_econtrol (pb, 0x10, 0x10);
-
+ frob_econtrol(pb, 0x10, 0x10);
+
clear_epp_timeout(pb);
- parport_pc_frob_control (pb, 0x20, 0x20);
- parport_pc_frob_control (pb, 0x10, 0x10);
+ parport_pc_frob_control(pb, 0x20, 0x20);
+ parport_pc_frob_control(pb, 0x10, 0x10);
clear_epp_timeout(pb);
/* Device isn't expecting an EPP read
@@ -2076,9 +2136,9 @@
parport_pc_read_epp(pb);
udelay(20);
- pb->irq = probe_irq_off (irqs);
+ pb->irq = probe_irq_off(irqs);
if (pb->modes & PARPORT_MODE_PCECR)
- ECR_WRITE (pb, oecr);
+ ECR_WRITE(pb, oecr);
parport_pc_write_control(pb, 0xc);
if (pb->irq <= 0)
@@ -2135,28 +2195,28 @@
/* --- DMA detection -------------------------------------- */
/* Only if chipset conforms to ECP ISA Interface Standard */
-static int programmable_dma_support (struct parport *p)
+static int programmable_dma_support(struct parport *p)
{
- unsigned char oecr = inb (ECONTROL (p));
+ unsigned char oecr = inb(ECONTROL(p));
int dma;
- frob_set_mode (p, ECR_CNF);
-
- dma = inb (CONFIGB(p)) & 0x07;
+ frob_set_mode(p, ECR_CNF);
+
+ dma = inb(CONFIGB(p)) & 0x07;
/* 000: Indicates jumpered 8-bit DMA if read-only.
100: Indicates jumpered 16-bit DMA if read-only. */
if ((dma & 0x03) == 0)
dma = PARPORT_DMA_NONE;
- ECR_WRITE (p, oecr);
+ ECR_WRITE(p, oecr);
return dma;
}
-static int parport_dma_probe (struct parport *p)
+static int parport_dma_probe(struct parport *p)
{
const struct parport_pc_private *priv = p->private_data;
- if (priv->ecr)
- p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+ if (priv->ecr) /* ask ECP chipset first */
+ p->dma = programmable_dma_support(p);
if (p->dma == PARPORT_DMA_NONE) {
/* ask known Super-IO chips proper, although these
claim ECP compatible, some don't report their DMA
@@ -2214,7 +2274,7 @@
if (!base_res)
goto out4;
- memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+ memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations));
priv->ctr = 0xc;
priv->ctr_writable = ~0x10;
priv->ecr = 0;
@@ -2241,7 +2301,7 @@
if (!parport_EPP_supported(p))
parport_ECPEPP_supported(p);
}
- if (!parport_SPP_supported (p))
+ if (!parport_SPP_supported(p))
/* No port. */
goto out5;
if (priv->ecr)
@@ -2249,7 +2309,7 @@
else
parport_PS2_supported(p);
- p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+ p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
if (p->base_hi && priv->ecr)
@@ -2273,7 +2333,7 @@
}
}
if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
- is mandatory (see above) */
+ is mandatory (see above) */
p->dma = PARPORT_DMA_NONE;
#ifdef CONFIG_PARPORT_PC_FIFO
@@ -2290,16 +2350,23 @@
if (p->dma != PARPORT_DMA_NONE) {
printk(", dma %d", p->dma);
p->modes |= PARPORT_MODE_DMA;
- }
- else printk(", using FIFO");
- }
- else
+ } else
+ printk(", using FIFO");
+ } else
/* We can't use the DMA channel after all. */
p->dma = PARPORT_DMA_NONE;
#endif /* Allowed to use FIFO/DMA */
printk(" [");
-#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+
+#define printmode(x) \
+ {\
+ if (p->modes & PARPORT_MODE_##x) {\
+ printk("%s%s", f ? "," : "", #x);\
+ f++;\
+ } \
+ }
+
{
int f = 0;
printmode(PCSPP);
@@ -2311,10 +2378,10 @@
}
#undef printmode
#ifndef CONFIG_PARPORT_1284
- printk ("(,...)");
+ printk("(,...)");
#endif /* CONFIG_PARPORT_1284 */
printk("]\n");
- if (probedirq != PARPORT_IRQ_NONE)
+ if (probedirq != PARPORT_IRQ_NONE)
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
/* If No ECP release the ports grabbed above. */
@@ -2330,7 +2397,7 @@
if (p->irq != PARPORT_IRQ_NONE) {
if (request_irq(p->irq, parport_irq_handler,
irqflags, p->name, p)) {
- printk (KERN_WARNING "%s: irq %d in use, "
+ printk(KERN_WARNING "%s: irq %d in use, "
"resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
@@ -2340,8 +2407,8 @@
#ifdef CONFIG_PARPORT_PC_FIFO
#ifdef HAS_DMA
if (p->dma != PARPORT_DMA_NONE) {
- if (request_dma (p->dma, p->name)) {
- printk (KERN_WARNING "%s: dma %d in use, "
+ if (request_dma(p->dma, p->name)) {
+ printk(KERN_WARNING "%s: dma %d in use, "
"resorting to PIO operation\n",
p->name, p->dma);
p->dma = PARPORT_DMA_NONE;
@@ -2351,8 +2418,8 @@
PAGE_SIZE,
&priv->dma_handle,
GFP_KERNEL);
- if (! priv->dma_buf) {
- printk (KERN_WARNING "%s: "
+ if (!priv->dma_buf) {
+ printk(KERN_WARNING "%s: "
"cannot get buffer for DMA, "
"resorting to PIO operation\n",
p->name);
@@ -2371,10 +2438,10 @@
* Put the ECP detected port in PS2 mode.
* Do this also for ports that have ECR but don't do ECP.
*/
- ECR_WRITE (p, 0x34);
+ ECR_WRITE(p, 0x34);
parport_pc_write_data(p, 0);
- parport_pc_data_forward (p);
+ parport_pc_data_forward(p);
/* Now that we've told the sharing engine about the port, and
found out its characteristics, let the high-level drivers
@@ -2382,7 +2449,7 @@
spin_lock(&ports_lock);
list_add(&priv->list, &ports_list);
spin_unlock(&ports_lock);
- parport_announce_port (p);
+ parport_announce_port(p);
return p;
@@ -2395,18 +2462,17 @@
out4:
parport_put_port(p);
out3:
- kfree (priv);
+ kfree(priv);
out2:
- kfree (ops);
+ kfree(ops);
out1:
if (pdev)
platform_device_unregister(pdev);
return NULL;
}
+EXPORT_SYMBOL(parport_pc_probe_port);
-EXPORT_SYMBOL (parport_pc_probe_port);
-
-void parport_pc_unregister_port (struct parport *p)
+void parport_pc_unregister_port(struct parport *p)
{
struct parport_pc_private *priv = p->private_data;
struct parport_operations *ops = p->ops;
@@ -2432,17 +2498,16 @@
priv->dma_buf,
priv->dma_handle);
#endif
- kfree (p->private_data);
+ kfree(p->private_data);
parport_put_port(p);
- kfree (ops); /* hope no-one cached it */
+ kfree(ops); /* hope no-one cached it */
}
-
-EXPORT_SYMBOL (parport_pc_unregister_port);
+EXPORT_SYMBOL(parport_pc_unregister_port);
#ifdef CONFIG_PCI
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
int autodma,
const struct parport_pc_via_data *via)
{
@@ -2454,73 +2519,74 @@
int irq;
int i;
- DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
-
- // make sure which one chip
- for(i = 0; i < 5; i++) {
+ DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+
+ /* make sure which one chip */
+ for (i = 0; i < 5; i++) {
base_res = request_region(inta_addr[i], 32, "it887x");
if (base_res) {
int test;
- pci_write_config_dword (pdev, 0x60,
+ pci_write_config_dword(pdev, 0x60,
0xe5000000 | inta_addr[i]);
- pci_write_config_dword (pdev, 0x78,
+ pci_write_config_dword(pdev, 0x78,
0x00000000 | inta_addr[i]);
- test = inb (inta_addr[i]);
- if (test != 0xff) break;
+ test = inb(inta_addr[i]);
+ if (test != 0xff)
+ break;
release_region(inta_addr[i], 0x8);
}
}
- if(i >= 5) {
- printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+ if (i >= 5) {
+ printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
return 0;
}
- type = inb (inta_addr[i] + 0x18);
+ type = inb(inta_addr[i] + 0x18);
type &= 0x0f;
switch (type) {
case 0x2:
- printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xa:
- printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
ite8872set = 0x64200000;
break;
case 0xe:
- printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+ printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
ite8872set = 0x64e00000;
break;
case 0x6:
- printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
return 0;
case 0x8:
- DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+ DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
return 0;
default:
- printk (KERN_INFO "parport_pc: unknown ITE887x\n");
- printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+ printk(KERN_INFO "parport_pc: unknown ITE887x\n");
+ printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
"output to Rich.Liu@ite.com.tw\n");
return 0;
}
- pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
- pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+ pci_read_config_byte(pdev, 0x3c, &ite8872_irq);
+ pci_read_config_dword(pdev, 0x1c, &ite8872_lpt);
ite8872_lpt &= 0x0000ff00;
- pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+ pci_read_config_dword(pdev, 0x20, &ite8872_lpthi);
ite8872_lpthi &= 0x0000ff00;
- pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
- pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
- pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
- // SET SPP&EPP , Parallel Port NO DMA , Enable All Function
- // SET Parallel IRQ
- pci_write_config_dword (pdev, 0x9c,
+ pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+ pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+ pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+ /* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */
+ /* SET Parallel IRQ */
+ pci_write_config_dword(pdev, 0x9c,
ite8872set | (ite8872_irq * 0x11111));
- DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
- DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+ DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+ DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
ite8872_lpt);
- DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+ DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
ite8872_lpthi);
/* Let the user (or defaults) steer us away from interrupts */
@@ -2532,14 +2598,14 @@
* Release the resource so that parport_pc_probe_port can get it.
*/
release_resource(base_res);
- if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+ if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
- printk (KERN_INFO
+ printk(KERN_INFO
"parport_pc: ITE 8872 parallel port: io=0x%X",
- ite8872_lpt);
+ ite8872_lpt);
if (irq != PARPORT_IRQ_NONE)
- printk (", irq=%d", irq);
- printk ("\n");
+ printk(", irq=%d", irq);
+ printk("\n");
return 1;
}
@@ -2548,7 +2614,7 @@
/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode = 0;
+static int __devinitdata parport_init_mode;
/* Data for two known VIA chips */
static struct parport_pc_via_data via_686a_data __devinitdata = {
@@ -2570,7 +2636,7 @@
0xF6
};
-static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
int autodma,
const struct parport_pc_via_data *via)
{
@@ -2582,38 +2648,38 @@
printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
- switch(parport_init_mode)
- {
+ switch (parport_init_mode) {
case 1:
- printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_SPP;
- break;
+ printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ break;
case 2:
- printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
- siofunc = VIA_FUNCTION_PARPORT_SPP;
- ppcontrol = VIA_PARPORT_BIDIR;
- break;
+ printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_SPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
case 3:
- printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_EPP;
- ppcontrol = VIA_PARPORT_BIDIR;
- have_epp = 1;
- break;
+ printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_EPP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ have_epp = 1;
+ break;
case 4:
- printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_ECP;
- ppcontrol = VIA_PARPORT_BIDIR;
- break;
+ printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR;
+ break;
case 5:
- printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
- siofunc = VIA_FUNCTION_PARPORT_ECP;
- ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
- have_epp = 1;
- break;
- default:
- printk(KERN_DEBUG "parport_pc: probing current configuration\n");
- siofunc = VIA_FUNCTION_PROBE;
- break;
+ printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+ siofunc = VIA_FUNCTION_PARPORT_ECP;
+ ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+ have_epp = 1;
+ break;
+ default:
+ printk(KERN_DEBUG
+ "parport_pc: probing current configuration\n");
+ siofunc = VIA_FUNCTION_PROBE;
+ break;
}
/*
* unlock super i/o configuration
@@ -2624,38 +2690,36 @@
/* Bits 1-0: Parallel Port Mode / Enable */
outb(via->viacfg_function, VIA_CONFIG_INDEX);
- tmp = inb (VIA_CONFIG_DATA);
+ tmp = inb(VIA_CONFIG_DATA);
/* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
- tmp2 = inb (VIA_CONFIG_DATA);
- if (siofunc == VIA_FUNCTION_PROBE)
- {
- siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
- ppcontrol = tmp2;
+ tmp2 = inb(VIA_CONFIG_DATA);
+ if (siofunc == VIA_FUNCTION_PROBE) {
+ siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+ ppcontrol = tmp2;
+ } else {
+ tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+ tmp |= siofunc;
+ outb(via->viacfg_function, VIA_CONFIG_INDEX);
+ outb(tmp, VIA_CONFIG_DATA);
+ tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+ tmp2 |= ppcontrol;
+ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+ outb(tmp2, VIA_CONFIG_DATA);
}
- else
- {
- tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
- tmp |= siofunc;
- outb(via->viacfg_function, VIA_CONFIG_INDEX);
- outb(tmp, VIA_CONFIG_DATA);
- tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
- tmp2 |= ppcontrol;
- outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
- outb(tmp2, VIA_CONFIG_DATA);
- }
-
+
/* Parallel Port I/O Base Address, bits 9-2 */
outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
port1 = inb(VIA_CONFIG_DATA) << 2;
-
- printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
- if ((port1 == 0x3BC) && have_epp)
- {
- outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
- outb((0x378 >> 2), VIA_CONFIG_DATA);
- printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
- port1 = 0x378;
+
+ printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
+ port1);
+ if (port1 == 0x3BC && have_epp) {
+ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+ outb((0x378 >> 2), VIA_CONFIG_DATA);
+ printk(KERN_DEBUG
+ "parport_pc: Parallel port base changed to 0x378\n");
+ port1 = 0x378;
}
/*
@@ -2669,36 +2733,39 @@
printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
return 0;
}
-
+
/* Bits 7-4: PnP Routing for Parallel Port IRQ */
pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
- if (siofunc == VIA_FUNCTION_PARPORT_ECP)
- {
- /* Bits 3-2: PnP Routing for Parallel Port DMA */
- pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
- dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
- }
- else
- /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
- dma = PARPORT_DMA_NONE;
+ if (siofunc == VIA_FUNCTION_PARPORT_ECP) {
+ /* Bits 3-2: PnP Routing for Parallel Port DMA */
+ pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+ dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+ } else
+ /* if ECP not enabled, DMA is not enabled, assumed
+ bogus 'dma' value */
+ dma = PARPORT_DMA_NONE;
/* Let the user (or defaults) steer us away from interrupts and DMA */
if (autoirq == PARPORT_IRQ_NONE) {
- irq = PARPORT_IRQ_NONE;
- dma = PARPORT_DMA_NONE;
+ irq = PARPORT_IRQ_NONE;
+ dma = PARPORT_DMA_NONE;
}
if (autodma == PARPORT_DMA_NONE)
- dma = PARPORT_DMA_NONE;
+ dma = PARPORT_DMA_NONE;
switch (port1) {
- case 0x3bc: port2 = 0x7bc; break;
- case 0x378: port2 = 0x778; break;
- case 0x278: port2 = 0x678; break;
+ case 0x3bc:
+ port2 = 0x7bc; break;
+ case 0x378:
+ port2 = 0x778; break;
+ case 0x278:
+ port2 = 0x678; break;
default:
- printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
- port1);
+ printk(KERN_INFO
+ "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+ port1);
return 0;
}
@@ -2716,17 +2783,17 @@
}
/* finally, do the probe with values obtained */
- if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) {
- printk (KERN_INFO
+ if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
+ printk(KERN_INFO
"parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
- printk (", irq=%d", irq);
+ printk(", irq=%d", irq);
if (dma != PARPORT_DMA_NONE)
- printk (", dma=%d", dma);
- printk ("\n");
+ printk(", dma=%d", dma);
+ printk("\n");
return 1;
}
-
+
printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
port1, irq, dma);
return 0;
@@ -2734,8 +2801,8 @@
enum parport_pc_sio_types {
- sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
- sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
+ sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */
+ sio_via_8231, /* Via VT8231 south bridge integrated Super IO */
sio_ite_8872,
last_sio
};
@@ -2806,15 +2873,15 @@
};
-/* each element directly indexed from enum list, above
+/* each element directly indexed from enum list, above
* (but offset by last_sio) */
static struct parport_pc_pci {
int numports;
struct { /* BAR (base address registers) numbers in the config
- space header */
+ space header */
int lo;
- int hi; /* -1 if not there, >6 for offset-method (max
- BAR is 6) */
+ int hi;
+ /* -1 if not there, >6 for offset-method (max BAR is 6) */
} addr[4];
/* If set, this is called immediately after pci_enable_device.
@@ -2859,7 +2926,7 @@
/* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* SYBA uses fixed offsets in
- a 1K io window */
+ a 1K io window */
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
@@ -2875,11 +2942,14 @@
/* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } },
/* aks_0100 */ { 1, { { 0, -1 }, } },
/* mobility_pp */ { 1, { { 0, 1 }, } },
- /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */
- /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
- /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
- /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+
+ /* The netmos entries below are untested */
+ /* netmos_9705 */ { 1, { { 0, -1 }, } },
+ /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
+ /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
+ /* netmos_9805 */ { 1, { { 0, -1 }, } },
+ /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
};
@@ -2908,7 +2978,7 @@
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
- PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+ PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
@@ -2942,7 +3012,8 @@
{ 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
- { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+ /* AFAVLAB_TK9902 */
+ { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
{ 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 },
@@ -2985,14 +3056,14 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
{ 0, } /* terminate list */
};
-MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
struct pci_parport_data {
int num;
struct parport *ports[2];
};
-static int parport_pc_pci_probe (struct pci_dev *dev,
+static int parport_pc_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int err, count, n, i = id->driver_data;
@@ -3005,7 +3076,8 @@
/* This is a PCI card */
i -= last_sio;
count = 0;
- if ((err = pci_enable_device (dev)) != 0)
+ err = pci_enable_device(dev);
+ if (err)
return err;
data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
@@ -3013,7 +3085,7 @@
return -ENOMEM;
if (cards[i].preinit_hook &&
- cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+ cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
kfree(data);
return -ENODEV;
}
@@ -3023,25 +3095,25 @@
int hi = cards[i].addr[n].hi;
int irq;
unsigned long io_lo, io_hi;
- io_lo = pci_resource_start (dev, lo);
+ io_lo = pci_resource_start(dev, lo);
io_hi = 0;
if ((hi >= 0) && (hi <= 6))
- io_hi = pci_resource_start (dev, hi);
+ io_hi = pci_resource_start(dev, hi);
else if (hi > 6)
io_lo += hi; /* Reinterpret the meaning of
- "hi" as an offset (see SYBA
- def.) */
+ "hi" as an offset (see SYBA
+ def.) */
/* TODO: test if sharing interrupts works */
irq = dev->irq;
if (irq == IRQ_NONE) {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
parport_pc_pci_tbl[i + last_sio].vendor,
parport_pc_pci_tbl[i + last_sio].device,
io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
- printk (KERN_DEBUG
+ printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
parport_pc_pci_tbl[i + last_sio].vendor,
parport_pc_pci_tbl[i + last_sio].device,
@@ -3058,7 +3130,7 @@
data->num = count;
if (cards[i].postinit_hook)
- cards[i].postinit_hook (dev, count == 0);
+ cards[i].postinit_hook(dev, count == 0);
if (count) {
pci_set_drvdata(dev, data);
@@ -3092,7 +3164,7 @@
.remove = __devexit_p(parport_pc_pci_remove),
};
-static int __init parport_pc_init_superio (int autoirq, int autodma)
+static int __init parport_pc_init_superio(int autoirq, int autodma)
{
const struct pci_device_id *id;
struct pci_dev *pdev = NULL;
@@ -3103,8 +3175,9 @@
if (id == NULL || id->driver_data >= last_sio)
continue;
- if (parport_pc_superio_info[id->driver_data].probe
- (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+ if (parport_pc_superio_info[id->driver_data].probe(
+ pdev, autoirq, autodma,
+ parport_pc_superio_info[id->driver_data].via)) {
ret++;
}
}
@@ -3113,7 +3186,10 @@
}
#else
static struct pci_driver parport_pc_pci_driver;
-static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+ return 0;
+}
#endif /* CONFIG_PCI */
#ifdef CONFIG_PNP
@@ -3126,44 +3202,45 @@
{ }
};
-MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl);
-static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+static int parport_pc_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *id)
{
struct parport *pdata;
unsigned long io_lo, io_hi;
int dma, irq;
- if (pnp_port_valid(dev,0) &&
- !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
- io_lo = pnp_port_start(dev,0);
+ if (pnp_port_valid(dev, 0) &&
+ !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ io_lo = pnp_port_start(dev, 0);
} else
return -EINVAL;
- if (pnp_port_valid(dev,1) &&
- !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
- io_hi = pnp_port_start(dev,1);
+ if (pnp_port_valid(dev, 1) &&
+ !(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) {
+ io_hi = pnp_port_start(dev, 1);
} else
io_hi = 0;
- if (pnp_irq_valid(dev,0) &&
- !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
- irq = pnp_irq(dev,0);
+ if (pnp_irq_valid(dev, 0) &&
+ !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ irq = pnp_irq(dev, 0);
} else
irq = PARPORT_IRQ_NONE;
- if (pnp_dma_valid(dev,0) &&
- !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
- dma = pnp_dma(dev,0);
+ if (pnp_dma_valid(dev, 0) &&
+ !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ dma = pnp_dma(dev, 0);
} else
dma = PARPORT_DMA_NONE;
dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
- if (!(pdata = parport_pc_probe_port(io_lo, io_hi,
- irq, dma, &dev->dev, 0)))
+ pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0);
+ if (pdata == NULL)
return -ENODEV;
- pnp_set_drvdata(dev,pdata);
+ pnp_set_drvdata(dev, pdata);
return 0;
}
@@ -3205,7 +3282,7 @@
/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
static int __devinit __attribute__((unused))
-parport_pc_find_isa_ports (int autoirq, int autodma)
+parport_pc_find_isa_ports(int autoirq, int autodma)
{
int count = 0;
@@ -3229,7 +3306,7 @@
* autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
* autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
*/
-static void __init parport_pc_find_ports (int autoirq, int autodma)
+static void __init parport_pc_find_ports(int autoirq, int autodma)
{
int count = 0, err;
@@ -3263,11 +3340,18 @@
* syntax and keep in mind that code below is a cleaned up version.
*/
-static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
-static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
- { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
-static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
-static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = {
+ [0 ... PARPORT_PC_MAX_PORTS] = 0
+};
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = {
+ [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO
+};
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = {
+ [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE
+};
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = {
+ [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY
+};
static int __init parport_parse_param(const char *s, int *val,
int automatic, int none, int nofifo)
@@ -3308,18 +3392,19 @@
#ifdef CONFIG_PCI
static int __init parport_init_mode_setup(char *str)
{
- printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+ printk(KERN_DEBUG
+ "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
- if (!strcmp (str, "spp"))
- parport_init_mode=1;
- if (!strcmp (str, "ps2"))
- parport_init_mode=2;
- if (!strcmp (str, "epp"))
- parport_init_mode=3;
- if (!strcmp (str, "ecp"))
- parport_init_mode=4;
- if (!strcmp (str, "ecpepp"))
- parport_init_mode=5;
+ if (!strcmp(str, "spp"))
+ parport_init_mode = 1;
+ if (!strcmp(str, "ps2"))
+ parport_init_mode = 2;
+ if (!strcmp(str, "epp"))
+ parport_init_mode = 3;
+ if (!strcmp(str, "ecp"))
+ parport_init_mode = 4;
+ if (!strcmp(str, "ecpepp"))
+ parport_init_mode = 5;
return 1;
}
#endif
@@ -3343,7 +3428,8 @@
#endif
#ifdef CONFIG_PCI
static char *init_mode;
-MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+MODULE_PARM_DESC(init_mode,
+ "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
module_param(init_mode, charp, 0);
#endif
@@ -3374,7 +3460,7 @@
irqval[0] = val;
break;
default:
- printk (KERN_WARNING
+ printk(KERN_WARNING
"parport_pc: irq specified "
"without base address. Use 'io=' "
"to specify one\n");
@@ -3387,7 +3473,7 @@
dmaval[0] = val;
break;
default:
- printk (KERN_WARNING
+ printk(KERN_WARNING
"parport_pc: dma specified "
"without base address. Use 'io=' "
"to specify one\n");
@@ -3398,7 +3484,7 @@
#else
-static int parport_setup_ptr __initdata = 0;
+static int parport_setup_ptr __initdata;
/*
* Acceptable parameters:
@@ -3409,7 +3495,7 @@
*
* IRQ/DMA may be numeric or 'auto' or 'none'
*/
-static int __init parport_setup (char *str)
+static int __init parport_setup(char *str)
{
char *endptr;
char *sep;
@@ -3421,15 +3507,15 @@
return 1;
}
- if (!strncmp (str, "auto", 4)) {
+ if (!strncmp(str, "auto", 4)) {
irqval[0] = PARPORT_IRQ_AUTO;
dmaval[0] = PARPORT_DMA_AUTO;
return 1;
}
- val = simple_strtoul (str, &endptr, 0);
+ val = simple_strtoul(str, &endptr, 0);
if (endptr == str) {
- printk (KERN_WARNING "parport=%s not understood\n", str);
+ printk(KERN_WARNING "parport=%s not understood\n", str);
return 1;
}
@@ -3463,7 +3549,7 @@
return io[0] == PARPORT_DISABLE;
}
-__setup ("parport=", parport_setup);
+__setup("parport=", parport_setup);
/*
* Acceptable parameters:
@@ -3471,7 +3557,7 @@
* parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
*/
#ifdef CONFIG_PCI
-__setup("parport_init_mode=",parport_init_mode_setup);
+__setup("parport_init_mode=", parport_init_mode_setup);
#endif
#endif
@@ -3495,13 +3581,13 @@
for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
if (!io[i])
break;
- if ((io_hi[i]) == PARPORT_IOHI_AUTO)
- io_hi[i] = 0x400 + io[i];
+ if (io_hi[i] == PARPORT_IOHI_AUTO)
+ io_hi[i] = 0x400 + io[i];
parport_pc_probe_port(io[i], io_hi[i],
- irqval[i], dmaval[i], NULL, 0);
+ irqval[i], dmaval[i], NULL, 0);
}
} else
- parport_pc_find_ports (irqval[0], dmaval[0]);
+ parport_pc_find_ports(irqval[0], dmaval[0]);
return 0;
}
@@ -3509,9 +3595,9 @@
static void __exit parport_pc_exit(void)
{
if (pci_registered_parport)
- pci_unregister_driver (&parport_pc_pci_driver);
+ pci_unregister_driver(&parport_pc_pci_driver);
if (pnp_registered_parport)
- pnp_unregister_driver (&parport_pc_pnp_driver);
+ pnp_unregister_driver(&parport_pc_pnp_driver);
platform_driver_unregister(&parport_pc_platform_driver);
while (!list_empty(&ports_list)) {