drivers/scsi/lpfc/lpfc.h - kernel/msm - Gitiles

 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
  * Copyright (C) 2004-2007 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
  *                                                                 *
  * This program is free software; you can redistribute it and/or   *
  * modify it under the terms of version 2 of the GNU General       *
  * Public License as published by the Free Software Foundation.    *
  * This program is distributed in the hope that it will be useful. *
  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  * more details, a copy of which can be found in the file COPYING  *
  * included with this package.                                     *
  *******************************************************************/

 #include <scsi/scsi_host.h>

 struct lpfc_sli2_slim;

 #define LPFC_MAX_TARGET		256	/* max number of targets supported */
 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
 					   requests */
 #define LPFC_MAX_NS_RETRY	3	/* Number of retry attempts to contact
 					   the NameServer  before giving up. */
 #define LPFC_CMD_PER_LUN	3	/* max outstanding cmds per lun */
 #define LPFC_DEFAULT_SG_SEG_CNT	64	/* sg element count per scsi cmnd */
 #define LPFC_MAX_SG_SEG_CNT	256	/* sg element count per scsi cmnd */
 #define LPFC_IOCB_LIST_CNT	2250	/* list of IOCBs for fast-path usage. */
 #define LPFC_Q_RAMP_UP_INTERVAL 120     /* lun q_depth ramp up interval */

 /*
  * Following time intervals are used of adjusting SCSI device
  * queue depths when there are driver resource error or Firmware
  * resource error.
  */
 #define QUEUE_RAMP_DOWN_INTERVAL	(1 * HZ)   /* 1 Second */
 #define QUEUE_RAMP_UP_INTERVAL		(300 * HZ) /* 5 minutes */

 /* Number of exchanges reserved for discovery to complete */
 #define LPFC_DISC_IOCB_BUFF_COUNT 20

 #define LPFC_HB_MBOX_INTERVAL   5	/* Heart beat interval in seconds. */
 #define LPFC_HB_MBOX_TIMEOUT    30	/* Heart beat timeout  in seconds. */

 /* Define macros for 64 bit support */
 #define putPaddrLow(addr)    ((uint32_t) (0xffffffff & (u64)(addr)))
 #define putPaddrHigh(addr)   ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
 #define getPaddr(high, low)  ((dma_addr_t)( \
 			     (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
 /* Provide maximum configuration definitions. */
 #define LPFC_DRVR_TIMEOUT	16	/* driver iocb timeout value in sec */
 #define FC_MAX_ADPTMSG		64

 #define MAX_HBAEVT	32

 enum lpfc_polling_flags {
 	ENABLE_FCP_RING_POLLING = 0x1,
 	DISABLE_FCP_RING_INT    = 0x2
 };

 /* Provide DMA memory definitions the driver uses per port instance. */
 struct lpfc_dmabuf {
 	struct list_head list;
 	void *virt;		/* virtual address ptr */
 	dma_addr_t phys;	/* mapped address */
 	uint32_t   buffer_tag;	/* used for tagged queue ring */
 };

 struct lpfc_dma_pool {
 	struct lpfc_dmabuf   *elements;
 	uint32_t    max_count;
 	uint32_t    current_count;
 };

 struct hbq_dmabuf {
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
 };

 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
 #define MEM_PRI		0x100


 /****************************************************************************/
 /*      Device VPD save area                                                */
 /****************************************************************************/
 typedef struct lpfc_vpd {
 	uint32_t status;	/* vpd status value */
 	uint32_t length;	/* number of bytes actually returned */
 	struct {
 		uint32_t rsvd1;	/* Revision numbers */
 		uint32_t biuRev;
 		uint32_t smRev;
 		uint32_t smFwRev;
 		uint32_t endecRev;
 		uint16_t rBit;
 		uint8_t fcphHigh;
 		uint8_t fcphLow;
 		uint8_t feaLevelHigh;
 		uint8_t feaLevelLow;
 		uint32_t postKernRev;
 		uint32_t opFwRev;
 		uint8_t opFwName[16];
 		uint32_t sli1FwRev;
 		uint8_t sli1FwName[16];
 		uint32_t sli2FwRev;
 		uint8_t sli2FwName[16];
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
 		uint32_t rsvd2  :24;  /* Reserved                             */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
 #else	/*  __LITTLE_ENDIAN */
 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t rsvd2  :24;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;

 struct lpfc_scsi_buf;


 /*
  * lpfc stat counters
  */
 struct lpfc_stats {
 	/* Statistics for ELS commands */
 	uint32_t elsLogiCol;
 	uint32_t elsRetryExceeded;
 	uint32_t elsXmitRetry;
 	uint32_t elsDelayRetry;
 	uint32_t elsRcvDrop;
 	uint32_t elsRcvFrame;
 	uint32_t elsRcvRSCN;
 	uint32_t elsRcvRNID;
 	uint32_t elsRcvFARP;
 	uint32_t elsRcvFARPR;
 	uint32_t elsRcvFLOGI;
 	uint32_t elsRcvPLOGI;
 	uint32_t elsRcvADISC;
 	uint32_t elsRcvPDISC;
 	uint32_t elsRcvFAN;
 	uint32_t elsRcvLOGO;
 	uint32_t elsRcvPRLO;
 	uint32_t elsRcvPRLI;
 	uint32_t elsRcvLIRR;
 	uint32_t elsRcvRPS;
 	uint32_t elsRcvRPL;
 	uint32_t elsXmitFLOGI;
 	uint32_t elsXmitFDISC;
 	uint32_t elsXmitPLOGI;
 	uint32_t elsXmitPRLI;
 	uint32_t elsXmitADISC;
 	uint32_t elsXmitLOGO;
 	uint32_t elsXmitSCR;
 	uint32_t elsXmitRNID;
 	uint32_t elsXmitFARP;
 	uint32_t elsXmitFARPR;
 	uint32_t elsXmitACC;
 	uint32_t elsXmitLSRJT;

 	uint32_t frameRcvBcast;
 	uint32_t frameRcvMulti;
 	uint32_t strayXmitCmpl;
 	uint32_t frameXmitDelay;
 	uint32_t xriCmdCmpl;
 	uint32_t xriStatErr;
 	uint32_t LinkUp;
 	uint32_t LinkDown;
 	uint32_t LinkMultiEvent;
 	uint32_t NoRcvBuf;
 	uint32_t fcpCmd;
 	uint32_t fcpCmpl;
 	uint32_t fcpRspErr;
 	uint32_t fcpRemoteStop;
 	uint32_t fcpPortRjt;
 	uint32_t fcpPortBusy;
 	uint32_t fcpError;
 	uint32_t fcpLocalErr;
 };

 enum sysfs_mbox_state {
 	SMBOX_IDLE,
 	SMBOX_WRITING,
 	SMBOX_READING
 };

 struct lpfc_sysfs_mbox {
 	enum sysfs_mbox_state state;
 	size_t                offset;
 	struct lpfcMboxq *    mbox;
 };

 struct lpfc_hba;


 enum discovery_state {
 	LPFC_VPORT_UNKNOWN     =  0,    /* vport state is unknown */
 	LPFC_VPORT_FAILED      =  1,    /* vport has failed */
 	LPFC_LOCAL_CFG_LINK    =  6,    /* local NPORT Id configured */
 	LPFC_FLOGI             =  7,    /* FLOGI sent to Fabric */
 	LPFC_FDISC             =  8,    /* FDISC sent for vport */
 	LPFC_FABRIC_CFG_LINK   =  9,    /* Fabric assigned NPORT Id
 				         * configured */
 	LPFC_NS_REG            =  10,   /* Register with NameServer */
 	LPFC_NS_QRY            =  11,   /* Query NameServer for NPort ID list */
 	LPFC_BUILD_DISC_LIST   =  12,   /* Build ADISC and PLOGI lists for
 				         * device authentication / discovery */
 	LPFC_DISC_AUTH         =  13,   /* Processing ADISC list */
 	LPFC_VPORT_READY       =  32,
 };

 enum hba_state {
 	LPFC_LINK_UNKNOWN    =   0,   /* HBA state is unknown */
 	LPFC_WARM_START      =   1,   /* HBA state after selective reset */
 	LPFC_INIT_START      =   2,   /* Initial state after board reset */
 	LPFC_INIT_MBX_CMDS   =   3,   /* Initialize HBA with mbox commands */
 	LPFC_LINK_DOWN       =   4,   /* HBA initialized, link is down */
 	LPFC_LINK_UP         =   5,   /* Link is up  - issue READ_LA */
 	LPFC_CLEAR_LA        =   6,   /* authentication cmplt - issue
 				       * CLEAR_LA */
 	LPFC_HBA_READY       =  32,
 	LPFC_HBA_ERROR       =  -1
 };

 struct lpfc_vport {
 	struct list_head listentry;
 	struct lpfc_hba *phba;
 	uint8_t port_type;
 #define LPFC_PHYSICAL_PORT 1
 #define LPFC_NPIV_PORT  2
 #define LPFC_FABRIC_PORT 3
 	enum discovery_state port_state;

 	uint16_t vpi;

 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
  * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
  */
 #define FC_PT2PT                0x1	 /* pt2pt with no fabric */
 #define FC_PT2PT_PLOGI          0x2	 /* pt2pt initiate PLOGI */
 #define FC_DISC_TMO             0x4	 /* Discovery timer running */
 #define FC_PUBLIC_LOOP          0x8	 /* Public loop */
 #define FC_LBIT                 0x10	 /* LOGIN bit in loopinit set */
 #define FC_RSCN_MODE            0x20	 /* RSCN cmd rcv'ed */
 #define FC_NLP_MORE             0x40	 /* More node to process in node tbl */
 #define FC_OFFLINE_MODE         0x80	 /* Interface is offline for diag */
 #define FC_FABRIC               0x100	 /* We are fabric attached */
 #define FC_ESTABLISH_LINK       0x200	 /* Reestablish Link */
 #define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
 #define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
 #define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
 #define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
 #define FC_BYPASSED_MODE        0x20000	 /* NPort is in bypassed mode */
 #define FC_VPORT_NEEDS_REG_VPI	0x80000  /* Needs to have its vpi registered */
 #define FC_RSCN_DEFERRED	0x100000 /* A deferred RSCN being processed */

 	uint32_t ct_flags;
 #define FC_CT_RFF_ID		0x1	 /* RFF_ID accepted by switch */
 #define FC_CT_RNN_ID		0x2	 /* RNN_ID accepted by switch */
 #define FC_CT_RSNN_NN		0x4	 /* RSNN_NN accepted by switch */
 #define FC_CT_RSPN_ID		0x8	 /* RSPN_ID accepted by switch */
 #define FC_CT_RFT_ID		0x10	 /* RFT_ID accepted by switch */

 	struct list_head fc_nodes;

 	/* Keep counters for the number of entries in each list. */
 	uint16_t fc_plogi_cnt;
 	uint16_t fc_adisc_cnt;
 	uint16_t fc_reglogin_cnt;
 	uint16_t fc_prli_cnt;
 	uint16_t fc_unmap_cnt;
 	uint16_t fc_map_cnt;
 	uint16_t fc_npr_cnt;
 	uint16_t fc_unused_cnt;
 	struct serv_parm fc_sparam;	/* buffer for our service parameters */

 	uint32_t fc_myDID;	/* fibre channel S_ID */
 	uint32_t fc_prevDID;	/* previous fibre channel S_ID */

 	int32_t stopped;   /* HBA has not been restarted since last ERATT */
 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */

 	uint32_t num_disc_nodes;	/*in addition to hba_state */

 	uint32_t fc_nlp_cnt;	/* outstanding NODELIST requests */
 	uint32_t fc_rscn_id_cnt;	/* count of RSCNs payloads in list */
 	struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
 	struct lpfc_name fc_nodename;	/* fc nodename */
 	struct lpfc_name fc_portname;	/* fc portname */

 	struct lpfc_work_evt disc_timeout_evt;

 	struct timer_list fc_disctmo;	/* Discovery rescue timer */
 	uint8_t fc_ns_retry;	/* retries for fabric nameserver */
 	uint32_t fc_prli_sent;	/* cntr for outstanding PRLIs */

 	spinlock_t work_port_lock;
 	uint32_t work_port_events; /* Timeout to be handled  */
 #define WORKER_DISC_TMO                0x1	/* vport: Discovery timeout */
 #define WORKER_ELS_TMO                 0x2	/* vport: ELS timeout */
 #define WORKER_FDMI_TMO                0x4	/* vport: FDMI timeout */

 #define WORKER_MBOX_TMO                0x100	/* hba: MBOX timeout */
 #define WORKER_HB_TMO                  0x200	/* hba: Heart beat timeout */
 #define WORKER_FABRIC_BLOCK_TMO        0x400	/* hba: fabric block timout */
 #define WORKER_RAMP_DOWN_QUEUE         0x800	/* hba: Decrease Q depth */
 #define WORKER_RAMP_UP_QUEUE           0x1000	/* hba: Increase Q depth */

 	struct timer_list fc_fdmitmo;
 	struct timer_list els_tmofunc;

 	int unreg_vpi_cmpl;

 	uint8_t load_flag;
 #define FC_LOADING		0x1	/* HBA in process of loading drvr */
 #define FC_UNLOADING		0x2	/* HBA in process of unloading drvr */
 	char  *vname;		        /* Application assigned name */

 	/* Vport Config Parameters */
 	uint32_t cfg_scan_down;
 	uint32_t cfg_lun_queue_depth;
 	uint32_t cfg_nodev_tmo;
 	uint32_t cfg_devloss_tmo;
 	uint32_t cfg_restrict_login;
 	uint32_t cfg_peer_port_login;
 	uint32_t cfg_fcp_class;
 	uint32_t cfg_use_adisc;
 	uint32_t cfg_fdmi_on;
 	uint32_t cfg_discovery_threads;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_max_luns;
 	uint32_t cfg_enable_da_id;

 	uint32_t dev_loss_tmo_changed;

 	struct fc_vport *fc_vport;

 #ifdef CONFIG_LPFC_DEBUG_FS
 	struct dentry *debug_disc_trc;
 	struct dentry *debug_nodelist;
 	struct dentry *vport_debugfs_root;
 	struct lpfc_debugfs_trc *disc_trc;
 	atomic_t disc_trc_cnt;
 #endif
 };

 struct hbq_s {
 	uint16_t entry_count;	  /* Current number of HBQ slots */
 	uint16_t buffer_count;	  /* Current number of buffers posted */
 	uint32_t next_hbqPutIdx;  /* Index to next HBQ slot to use */
 	uint32_t hbqPutIdx;	  /* HBQ slot to use */
 	uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
 	void    *hbq_virt;	  /* Virtual ptr to this hbq */
 	struct list_head hbq_buffer_list;  /* buffers assigned to this HBQ */
 				  /* Callback for HBQ buffer allocation */
 	struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
 				  /* Callback for HBQ buffer free */
 	void               (*hbq_free_buffer) (struct lpfc_hba *,
 					       struct hbq_dmabuf *);
 };

 #define LPFC_MAX_HBQS  4
 /* this matches the position in the lpfc_hbq_defs array */
 #define LPFC_ELS_HBQ	0
 #define LPFC_EXTRA_HBQ	1

 enum hba_temp_state {
 	HBA_NORMAL_TEMP,
 	HBA_OVER_TEMP
 };

 struct lpfc_hba {
 	struct lpfc_sli sli;
 	uint32_t sli_rev;		/* SLI2 or SLI3 */
 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
 #define LPFC_SLI3_ENABLED	 0x01
 #define LPFC_SLI3_HBQ_ENABLED	 0x02
 #define LPFC_SLI3_NPIV_ENABLED	 0x04
 #define LPFC_SLI3_VPORT_TEARDOWN 0x08
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;

 	enum hba_state link_state;
 	uint32_t link_flag;	/* link state flags */
 #define LS_LOOPBACK_MODE      0x1	/* NPort is in Loopback mode */
 					/* This flag is set while issuing */
 					/* INIT_LINK mailbox command */
 #define LS_NPIV_FAB_SUPPORTED 0x2	/* Fabric supports NPIV */
 #define LS_IGNORE_ERATT       0x3	/* intr handler should ignore ERATT */

 	struct lpfc_sli2_slim *slim2p;
 	struct lpfc_dmabuf hbqslimp;

 	dma_addr_t slim2p_mapping;

 	uint16_t pci_cfg_value;

 	uint8_t work_found;
 #define LPFC_MAX_WORKER_ITERATION  4

 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */

 	uint32_t fc_eventTag;	/* event tag for link attention */


 	struct timer_list fc_estabtmo;	/* link establishment timer */
 	/* These fields used to be binfo */
 	uint32_t fc_pref_DID;	/* preferred D_ID */
 	uint8_t  fc_pref_ALPA;	/* preferred AL_PA */
 	uint32_t fc_edtov;	/* E_D_TOV timer value */
 	uint32_t fc_arbtov;	/* ARB_TOV timer value */
 	uint32_t fc_ratov;	/* R_A_TOV timer value */
 	uint32_t fc_rttov;	/* R_T_TOV timer value */
 	uint32_t fc_altov;	/* AL_TOV timer value */
 	uint32_t fc_crtov;	/* C_R_TOV timer value */
 	uint32_t fc_citov;	/* C_I_TOV timer value */

 	struct serv_parm fc_fabparam;	/* fabric service parameters buffer */
 	uint8_t alpa_map[128];	/* AL_PA map from READ_LA */

 	uint32_t lmt;

 	uint32_t fc_topology;	/* link topology, from LINK INIT */

 	struct lpfc_stats fc_stat;

 	struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
 	uint32_t nport_event_cnt;	/* timestamp for nlplist entry */

 	uint8_t  wwnn[8];
 	uint8_t  wwpn[8];
 	uint32_t RandomData[7];

 	/* HBA Config Parameters */
 	uint32_t cfg_ack0;
 	uint32_t cfg_enable_npiv;
 	uint32_t cfg_topology;
 	uint32_t cfg_link_speed;
 	uint32_t cfg_cr_delay;
 	uint32_t cfg_cr_count;
 	uint32_t cfg_multi_ring_support;
 	uint32_t cfg_multi_ring_rctl;
 	uint32_t cfg_multi_ring_type;
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
 	uint64_t cfg_soft_wwnn;
 	uint64_t cfg_soft_wwpn;
 	uint32_t cfg_hba_queue_depth;
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;

 	lpfc_vpd_t vpd;		/* vital product data */

 	struct pci_dev *pcidev;
 	struct list_head      work_list;
 	uint32_t              work_ha;      /* Host Attention Bits for WT */
 	uint32_t              work_ha_mask; /* HA Bits owned by WT        */
 	uint32_t              work_hs;      /* HS stored in case of ERRAT */
 	uint32_t              work_status[2]; /* Extra status from SLIM */

 	wait_queue_head_t    *work_wait;
 	struct task_struct   *worker_thread;

 	uint32_t hbq_count;	        /* Count of configured HBQs */
 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */

 	unsigned long pci_bar0_map;     /* Physical address for PCI BAR0 */
 	unsigned long pci_bar2_map;     /* Physical address for PCI BAR2 */
 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
 					   PCI BAR0 */
 	void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
 					    PCI BAR2 */

 	void __iomem *MBslimaddr;	/* virtual address for mbox cmds */
 	void __iomem *HAregaddr;	/* virtual address for host attn reg */
 	void __iomem *CAregaddr;	/* virtual address for chip attn reg */
 	void __iomem *HSregaddr;	/* virtual address for host status
 					   reg */
 	void __iomem *HCregaddr;	/* virtual address for host ctl reg */

 	struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
 	uint32_t __iomem  *hbq_put;     /* Address in SLIM to HBQ put ptrs */
 	uint32_t          *hbq_get;     /* Host mem address of HBQ get ptrs */

 	int brd_no;			/* FC board number */

 	char SerialNumber[32];		/* adapter Serial Number */
 	char OptionROMVersion[32];	/* adapter BIOS / Fcode version */
 	char ModelDesc[256];		/* Model Description */
 	char ModelName[80];		/* Model Name */
 	char ProgramType[256];		/* Program Type */
 	char Port[20];			/* Port No */
 	uint8_t vpd_flag;               /* VPD data flag */

 #define VPD_MODEL_DESC      0x1         /* valid vpd model description */
 #define VPD_MODEL_NAME      0x2         /* valid vpd model name */
 #define VPD_PROGRAM_TYPE    0x4         /* valid vpd program type */
 #define VPD_PORT            0x8         /* valid vpd port data */
 #define VPD_MASK            0xf         /* mask for any vpd data */

 	uint8_t soft_wwn_enable;

 	struct timer_list fcp_poll_timer;

 	/*
 	 * stat  counters
 	 */
 	uint64_t fc4InputRequests;
 	uint64_t fc4OutputRequests;
 	uint64_t fc4ControlRequests;

 	struct lpfc_sysfs_mbox sysfs_mbox;

 	/* fastpath list. */
 	spinlock_t scsi_buf_list_lock;
 	struct list_head lpfc_scsi_buf_list;
 	uint32_t total_scsi_bufs;
 	struct list_head lpfc_iocb_list;
 	uint32_t total_iocbq_bufs;
 	spinlock_t hbalock;

 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
 	struct pci_pool *lpfc_hbq_pool;
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;

 	mempool_t *mbox_mem_pool;
 	mempool_t *nlp_mem_pool;

 	struct fc_host_statistics link_stats;
 	uint8_t using_msi;

 	struct list_head port_list;
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
 	unsigned long *vpi_bmask;	/* vpi allocation table */

 	/* Data structure used by fabric iocb scheduler */
 	struct list_head fabric_iocb_list;
 	atomic_t fabric_iocb_count;
 	struct timer_list fabric_block_timer;
 	unsigned long bit_flags;
 #define	FABRIC_COMANDS_BLOCKED	0
 	atomic_t num_rsrc_err;
 	atomic_t num_cmd_success;
 	unsigned long last_rsrc_error_time;
 	unsigned long last_ramp_down_time;
 	unsigned long last_ramp_up_time;
 #ifdef CONFIG_LPFC_DEBUG_FS
 	struct dentry *hba_debugfs_root;
 	atomic_t debugfs_vport_count;
 	struct dentry *debug_hbqinfo;
 	struct dentry *debug_dumpHostSlim;
 	struct dentry *debug_dumpHBASlim;
 	struct dentry *debug_slow_ring_trc;
 	struct lpfc_debugfs_trc *slow_ring_trc;
 	atomic_t slow_ring_trc_cnt;
 #endif

 	/* Used for deferred freeing of ELS data buffers */
 	struct list_head elsbuf;
 	int elsbuf_cnt;
 	int elsbuf_prev_cnt;

 	uint8_t temp_sensor_support;
 	/* Fields used for heart beat. */
 	unsigned long last_completion_time;
 	struct timer_list hb_tmofunc;
 	uint8_t hb_outstanding;
 	/*
 	 * Following bit will be set for all buffer tags which are not
 	 * associated with any HBQ.
 	 */
 #define QUE_BUFTAG_BIT  (1<<31)
 	uint32_t buffer_tag_count;
 	enum hba_temp_state over_temp_state;
 };

 static inline struct Scsi_Host *
 lpfc_shost_from_vport(struct lpfc_vport *vport)
 {
 	return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
 }

 static inline void
 lpfc_set_loopback_flag(struct lpfc_hba *phba)
 {
 	if (phba->cfg_topology == FLAGS_LOCAL_LB)
 		phba->link_flag |= LS_LOOPBACK_MODE;
 	else
 		phba->link_flag &= ~LS_LOOPBACK_MODE;
 }

 static inline int
 lpfc_is_link_up(struct lpfc_hba *phba)
 {
 	return  phba->link_state == LPFC_LINK_UP ||
 		phba->link_state == LPFC_CLEAR_LA ||
 		phba->link_state == LPFC_HBA_READY;
 }

 #define FC_REG_DUMP_EVENT		0x10	/* Register for Dump events */
 #define FC_REG_TEMPERATURE_EVENT	0x20    /* Register for temperature
 						   event */

 struct temp_event {
 	uint32_t event_type;
 	uint32_t event_code;
 	uint32_t data;
 };
 #define LPFC_CRIT_TEMP		0x1
 #define LPFC_THRESHOLD_TEMP	0x2
 #define LPFC_NORMAL_TEMP	0x3
	/*******************************************************************
	* This file is part of the Emulex Linux Device Driver for *
	* Fibre Channel Host Bus Adapters. *
	* Copyright (C) 2004-2007 Emulex. All rights reserved. *
	* EMULEX and SLI are trademarks of Emulex. *
	* www.emulex.com *
	* Portions Copyright (C) 2004-2005 Christoph Hellwig *
	* *
	* This program is free software; you can redistribute it and/or *
	* modify it under the terms of version 2 of the GNU General *
	* Public License as published by the Free Software Foundation. *
	* This program is distributed in the hope that it will be useful. *
	* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
	* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
	* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
	* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
	* TO BE LEGALLY INVALID. See the GNU General Public License for *
	* more details, a copy of which can be found in the file COPYING *
	* included with this package. *
	*******************************************************************/

	#include <scsi/scsi_host.h>

	struct lpfc_sli2_slim;

	#define LPFC_MAX_TARGET 256 /* max number of targets supported */
	#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
	requests */
	#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
	the NameServer before giving up. */
	#define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
	#define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
	#define LPFC_MAX_SG_SEG_CNT 256 /* sg element count per scsi cmnd */
	#define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
	#define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */

	/*
	* Following time intervals are used of adjusting SCSI device
	* queue depths when there are driver resource error or Firmware
	* resource error.
	*/
	#define QUEUE_RAMP_DOWN_INTERVAL (1 * HZ) /* 1 Second */
	#define QUEUE_RAMP_UP_INTERVAL (300 * HZ) /* 5 minutes */

	/* Number of exchanges reserved for discovery to complete */
	#define LPFC_DISC_IOCB_BUFF_COUNT 20

	#define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */
	#define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */

	/* Define macros for 64 bit support */
	#define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
	#define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
	#define getPaddr(high, low) ((dma_addr_t)( \
	(( (u64)(high)<<16 ) << 16)\|( (u64)(low))))
	/* Provide maximum configuration definitions. */
	#define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
	#define FC_MAX_ADPTMSG 64

	#define MAX_HBAEVT 32

	enum lpfc_polling_flags {
	ENABLE_FCP_RING_POLLING = 0x1,
	DISABLE_FCP_RING_INT = 0x2
	};

	/* Provide DMA memory definitions the driver uses per port instance. */
	struct lpfc_dmabuf {
	struct list_head list;
	void virt; / virtual address ptr */
	dma_addr_t phys; /* mapped address */
	uint32_t buffer_tag; /* used for tagged queue ring */
	};

	struct lpfc_dma_pool {
	struct lpfc_dmabuf *elements;
	uint32_t max_count;
	uint32_t current_count;
	};

	struct hbq_dmabuf {
	struct lpfc_dmabuf dbuf;
	uint32_t size;
	uint32_t tag;
	};

	/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
	#define MEM_PRI 0x100


	/****************************************************************************/
	/* Device VPD save area */
	/****************************************************************************/
	typedef struct lpfc_vpd {
	uint32_t status; /* vpd status value */
	uint32_t length; /* number of bytes actually returned */
	struct {
	uint32_t rsvd1; /* Revision numbers */
	uint32_t biuRev;
	uint32_t smRev;
	uint32_t smFwRev;
	uint32_t endecRev;
	uint16_t rBit;
	uint8_t fcphHigh;
	uint8_t fcphLow;
	uint8_t feaLevelHigh;
	uint8_t feaLevelLow;
	uint32_t postKernRev;
	uint32_t opFwRev;
	uint8_t opFwName[16];
	uint32_t sli1FwRev;
	uint8_t sli1FwName[16];
	uint32_t sli2FwRev;
	uint8_t sli2FwName[16];
	} rev;
	struct {
	#ifdef __BIG_ENDIAN_BITFIELD
	uint32_t rsvd2 :24; /* Reserved */
	uint32_t cmv : 1; /* Configure Max VPIs */
	uint32_t ccrp : 1; /* Config Command Ring Polling */
	uint32_t csah : 1; /* Configure Synchronous Abort Handling */
	uint32_t chbs : 1; /* Cofigure Host Backing store */
	uint32_t cinb : 1; /* Enable Interrupt Notification Block */
	uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
	uint32_t cmx : 1; /* Configure Max XRIs */
	uint32_t cmr : 1; /* Configure Max RPIs */
	#else /* __LITTLE_ENDIAN */
	uint32_t cmr : 1; /* Configure Max RPIs */
	uint32_t cmx : 1; /* Configure Max XRIs */
	uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
	uint32_t cinb : 1; /* Enable Interrupt Notification Block */
	uint32_t chbs : 1; /* Cofigure Host Backing store */
	uint32_t csah : 1; /* Configure Synchronous Abort Handling */
	uint32_t ccrp : 1; /* Config Command Ring Polling */
	uint32_t cmv : 1; /* Configure Max VPIs */
	uint32_t rsvd2 :24; /* Reserved */
	#endif
	} sli3Feat;
	} lpfc_vpd_t;

	struct lpfc_scsi_buf;


	/*
	* lpfc stat counters
	*/
	struct lpfc_stats {
	/* Statistics for ELS commands */
	uint32_t elsLogiCol;
	uint32_t elsRetryExceeded;
	uint32_t elsXmitRetry;
	uint32_t elsDelayRetry;
	uint32_t elsRcvDrop;
	uint32_t elsRcvFrame;
	uint32_t elsRcvRSCN;
	uint32_t elsRcvRNID;
	uint32_t elsRcvFARP;
	uint32_t elsRcvFARPR;
	uint32_t elsRcvFLOGI;
	uint32_t elsRcvPLOGI;
	uint32_t elsRcvADISC;
	uint32_t elsRcvPDISC;
	uint32_t elsRcvFAN;
	uint32_t elsRcvLOGO;
	uint32_t elsRcvPRLO;
	uint32_t elsRcvPRLI;
	uint32_t elsRcvLIRR;
	uint32_t elsRcvRPS;
	uint32_t elsRcvRPL;
	uint32_t elsXmitFLOGI;
	uint32_t elsXmitFDISC;
	uint32_t elsXmitPLOGI;
	uint32_t elsXmitPRLI;
	uint32_t elsXmitADISC;
	uint32_t elsXmitLOGO;
	uint32_t elsXmitSCR;
	uint32_t elsXmitRNID;
	uint32_t elsXmitFARP;
	uint32_t elsXmitFARPR;
	uint32_t elsXmitACC;
	uint32_t elsXmitLSRJT;

	uint32_t frameRcvBcast;
	uint32_t frameRcvMulti;
	uint32_t strayXmitCmpl;
	uint32_t frameXmitDelay;
	uint32_t xriCmdCmpl;
	uint32_t xriStatErr;
	uint32_t LinkUp;
	uint32_t LinkDown;
	uint32_t LinkMultiEvent;
	uint32_t NoRcvBuf;
	uint32_t fcpCmd;
	uint32_t fcpCmpl;
	uint32_t fcpRspErr;
	uint32_t fcpRemoteStop;
	uint32_t fcpPortRjt;
	uint32_t fcpPortBusy;
	uint32_t fcpError;
	uint32_t fcpLocalErr;
	};

	enum sysfs_mbox_state {
	SMBOX_IDLE,
	SMBOX_WRITING,
	SMBOX_READING
	};

	struct lpfc_sysfs_mbox {
	enum sysfs_mbox_state state;
	size_t offset;
	struct lpfcMboxq * mbox;
	};

	struct lpfc_hba;


	enum discovery_state {
	LPFC_VPORT_UNKNOWN = 0, /* vport state is unknown */
	LPFC_VPORT_FAILED = 1, /* vport has failed */
	LPFC_LOCAL_CFG_LINK = 6, /* local NPORT Id configured */
	LPFC_FLOGI = 7, /* FLOGI sent to Fabric */
	LPFC_FDISC = 8, /* FDISC sent for vport */
	LPFC_FABRIC_CFG_LINK = 9, /* Fabric assigned NPORT Id
	* configured */
	LPFC_NS_REG = 10, /* Register with NameServer */
	LPFC_NS_QRY = 11, /* Query NameServer for NPort ID list */
	LPFC_BUILD_DISC_LIST = 12, /* Build ADISC and PLOGI lists for
	* device authentication / discovery */
	LPFC_DISC_AUTH = 13, /* Processing ADISC list */
	LPFC_VPORT_READY = 32,
	};

	enum hba_state {
	LPFC_LINK_UNKNOWN = 0, /* HBA state is unknown */
	LPFC_WARM_START = 1, /* HBA state after selective reset */
	LPFC_INIT_START = 2, /* Initial state after board reset */
	LPFC_INIT_MBX_CMDS = 3, /* Initialize HBA with mbox commands */
	LPFC_LINK_DOWN = 4, /* HBA initialized, link is down */
	LPFC_LINK_UP = 5, /* Link is up - issue READ_LA */
	LPFC_CLEAR_LA = 6, /* authentication cmplt - issue
	* CLEAR_LA */
	LPFC_HBA_READY = 32,
	LPFC_HBA_ERROR = -1
	};

	struct lpfc_vport {
	struct list_head listentry;
	struct lpfc_hba *phba;
	uint8_t port_type;
	#define LPFC_PHYSICAL_PORT 1
	#define LPFC_NPIV_PORT 2
	#define LPFC_FABRIC_PORT 3
	enum discovery_state port_state;

	uint16_t vpi;

	uint32_t fc_flag; /* FC flags */
	/* Several of these flags are HBA centric and should be moved to
	* phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
	*/
	#define FC_PT2PT 0x1 /* pt2pt with no fabric */
	#define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
	#define FC_DISC_TMO 0x4 /* Discovery timer running */
	#define FC_PUBLIC_LOOP 0x8 /* Public loop */
	#define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
	#define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
	#define FC_NLP_MORE 0x40 /* More node to process in node tbl */
	#define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
	#define FC_FABRIC 0x100 /* We are fabric attached */
	#define FC_ESTABLISH_LINK 0x200 /* Reestablish Link */
	#define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
	#define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
	#define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
	#define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
	#define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */
	#define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */
	#define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */

	uint32_t ct_flags;
	#define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */
	#define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */
	#define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */
	#define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */
	#define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */

	struct list_head fc_nodes;

	/* Keep counters for the number of entries in each list. */
	uint16_t fc_plogi_cnt;
	uint16_t fc_adisc_cnt;
	uint16_t fc_reglogin_cnt;
	uint16_t fc_prli_cnt;
	uint16_t fc_unmap_cnt;
	uint16_t fc_map_cnt;
	uint16_t fc_npr_cnt;
	uint16_t fc_unused_cnt;
	struct serv_parm fc_sparam; /* buffer for our service parameters */

	uint32_t fc_myDID; /* fibre channel S_ID */
	uint32_t fc_prevDID; /* previous fibre channel S_ID */

	int32_t stopped; /* HBA has not been restarted since last ERATT */
	uint8_t fc_linkspeed; /* Link speed after last READ_LA */

	uint32_t num_disc_nodes; /in addition to hba_state /

	uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */
	uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */
	struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
	struct lpfc_name fc_nodename; /* fc nodename */
	struct lpfc_name fc_portname; /* fc portname */

	struct lpfc_work_evt disc_timeout_evt;

	struct timer_list fc_disctmo; /* Discovery rescue timer */
	uint8_t fc_ns_retry; /* retries for fabric nameserver */
	uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */

	spinlock_t work_port_lock;
	uint32_t work_port_events; /* Timeout to be handled */
	#define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */
	#define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */
	#define WORKER_FDMI_TMO 0x4 /* vport: FDMI timeout */

	#define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
	#define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */
	#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timout */
	#define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */
	#define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */

	struct timer_list fc_fdmitmo;
	struct timer_list els_tmofunc;

	int unreg_vpi_cmpl;

	uint8_t load_flag;
	#define FC_LOADING 0x1 /* HBA in process of loading drvr */
	#define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */
	char vname; / Application assigned name */

	/* Vport Config Parameters */
	uint32_t cfg_scan_down;
	uint32_t cfg_lun_queue_depth;
	uint32_t cfg_nodev_tmo;
	uint32_t cfg_devloss_tmo;
	uint32_t cfg_restrict_login;
	uint32_t cfg_peer_port_login;
	uint32_t cfg_fcp_class;
	uint32_t cfg_use_adisc;
	uint32_t cfg_fdmi_on;
	uint32_t cfg_discovery_threads;
	uint32_t cfg_log_verbose;
	uint32_t cfg_max_luns;
	uint32_t cfg_enable_da_id;

	uint32_t dev_loss_tmo_changed;

	struct fc_vport *fc_vport;

	#ifdef CONFIG_LPFC_DEBUG_FS
	struct dentry *debug_disc_trc;
	struct dentry *debug_nodelist;
	struct dentry *vport_debugfs_root;
	struct lpfc_debugfs_trc *disc_trc;
	atomic_t disc_trc_cnt;
	#endif
	};

	struct hbq_s {
	uint16_t entry_count; /* Current number of HBQ slots */
	uint16_t buffer_count; /* Current number of buffers posted */
	uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */
	uint32_t hbqPutIdx; /* HBQ slot to use */
	uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
	void hbq_virt; / Virtual ptr to this hbq */
	struct list_head hbq_buffer_list; /* buffers assigned to this HBQ */
	/* Callback for HBQ buffer allocation */
	struct hbq_dmabuf (hbq_alloc_buffer) (struct lpfc_hba *);
	/* Callback for HBQ buffer free */
	void (hbq_free_buffer) (struct lpfc_hba ,
	struct hbq_dmabuf *);
	};

	#define LPFC_MAX_HBQS 4
	/* this matches the position in the lpfc_hbq_defs array */
	#define LPFC_ELS_HBQ 0
	#define LPFC_EXTRA_HBQ 1

	enum hba_temp_state {
	HBA_NORMAL_TEMP,
	HBA_OVER_TEMP
	};

	struct lpfc_hba {
	struct lpfc_sli sli;
	uint32_t sli_rev; /* SLI2 or SLI3 */
	uint32_t sli3_options; /* Mask of enabled SLI3 options */
	#define LPFC_SLI3_ENABLED 0x01
	#define LPFC_SLI3_HBQ_ENABLED 0x02
	#define LPFC_SLI3_NPIV_ENABLED 0x04
	#define LPFC_SLI3_VPORT_TEARDOWN 0x08
	uint32_t iocb_cmd_size;
	uint32_t iocb_rsp_size;

	enum hba_state link_state;
	uint32_t link_flag; /* link state flags */
	#define LS_LOOPBACK_MODE 0x1 /* NPort is in Loopback mode */
	/* This flag is set while issuing */
	/* INIT_LINK mailbox command */
	#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
	#define LS_IGNORE_ERATT 0x3 /* intr handler should ignore ERATT */

	struct lpfc_sli2_slim *slim2p;
	struct lpfc_dmabuf hbqslimp;

	dma_addr_t slim2p_mapping;

	uint16_t pci_cfg_value;

	uint8_t work_found;
	#define LPFC_MAX_WORKER_ITERATION 4

	uint8_t fc_linkspeed; /* Link speed after last READ_LA */

	uint32_t fc_eventTag; /* event tag for link attention */


	struct timer_list fc_estabtmo; /* link establishment timer */
	/* These fields used to be binfo */
	uint32_t fc_pref_DID; /* preferred D_ID */
	uint8_t fc_pref_ALPA; /* preferred AL_PA */
	uint32_t fc_edtov; /* E_D_TOV timer value */
	uint32_t fc_arbtov; /* ARB_TOV timer value */
	uint32_t fc_ratov; /* R_A_TOV timer value */
	uint32_t fc_rttov; /* R_T_TOV timer value */
	uint32_t fc_altov; /* AL_TOV timer value */
	uint32_t fc_crtov; /* C_R_TOV timer value */
	uint32_t fc_citov; /* C_I_TOV timer value */

	struct serv_parm fc_fabparam; /* fabric service parameters buffer */
	uint8_t alpa_map[128]; /* AL_PA map from READ_LA */

	uint32_t lmt;

	uint32_t fc_topology; /* link topology, from LINK INIT */

	struct lpfc_stats fc_stat;

	struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
	uint32_t nport_event_cnt; /* timestamp for nlplist entry */

	uint8_t wwnn[8];
	uint8_t wwpn[8];
	uint32_t RandomData[7];

	/* HBA Config Parameters */
	uint32_t cfg_ack0;
	uint32_t cfg_enable_npiv;
	uint32_t cfg_topology;
	uint32_t cfg_link_speed;
	uint32_t cfg_cr_delay;
	uint32_t cfg_cr_count;
	uint32_t cfg_multi_ring_support;
	uint32_t cfg_multi_ring_rctl;
	uint32_t cfg_multi_ring_type;
	uint32_t cfg_poll;
	uint32_t cfg_poll_tmo;
	uint32_t cfg_use_msi;
	uint32_t cfg_sg_seg_cnt;
	uint32_t cfg_sg_dma_buf_size;
	uint64_t cfg_soft_wwnn;
	uint64_t cfg_soft_wwpn;
	uint32_t cfg_hba_queue_depth;
	uint32_t cfg_enable_hba_reset;
	uint32_t cfg_enable_hba_heartbeat;

	lpfc_vpd_t vpd; /* vital product data */

	struct pci_dev *pcidev;
	struct list_head work_list;
	uint32_t work_ha; /* Host Attention Bits for WT */
	uint32_t work_ha_mask; /* HA Bits owned by WT */
	uint32_t work_hs; /* HS stored in case of ERRAT */
	uint32_t work_status[2]; /* Extra status from SLIM */

	wait_queue_head_t *work_wait;
	struct task_struct *worker_thread;

	uint32_t hbq_count; /* Count of configured HBQs */
	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */

	unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
	unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
	void __iomem slim_memmap_p; / Kernel memory mapped address for
	PCI BAR0 */
	void __iomem ctrl_regs_memmap_p;/ Kernel memory mapped address for
	PCI BAR2 */

	void __iomem MBslimaddr; / virtual address for mbox cmds */
	void __iomem HAregaddr; / virtual address for host attn reg */
	void __iomem CAregaddr; / virtual address for chip attn reg */
	void __iomem HSregaddr; / virtual address for host status
	reg */
	void __iomem HCregaddr; / virtual address for host ctl reg */

	struct lpfc_hgp __iomem host_gp; / Host side get/put pointers */
	uint32_t __iomem hbq_put; / Address in SLIM to HBQ put ptrs */
	uint32_t hbq_get; / Host mem address of HBQ get ptrs */

	int brd_no; /* FC board number */

	char SerialNumber[32]; /* adapter Serial Number */
	char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
	char ModelDesc[256]; /* Model Description */
	char ModelName[80]; /* Model Name */
	char ProgramType[256]; /* Program Type */
	char Port[20]; /* Port No */
	uint8_t vpd_flag; /* VPD data flag */

	#define VPD_MODEL_DESC 0x1 /* valid vpd model description */
	#define VPD_MODEL_NAME 0x2 /* valid vpd model name */
	#define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
	#define VPD_PORT 0x8 /* valid vpd port data */
	#define VPD_MASK 0xf /* mask for any vpd data */

	uint8_t soft_wwn_enable;

	struct timer_list fcp_poll_timer;

	/*
	* stat counters
	*/
	uint64_t fc4InputRequests;
	uint64_t fc4OutputRequests;
	uint64_t fc4ControlRequests;

	struct lpfc_sysfs_mbox sysfs_mbox;

	/* fastpath list. */
	spinlock_t scsi_buf_list_lock;
	struct list_head lpfc_scsi_buf_list;
	uint32_t total_scsi_bufs;
	struct list_head lpfc_iocb_list;
	uint32_t total_iocbq_bufs;
	spinlock_t hbalock;

	/* pci_mem_pools */
	struct pci_pool *lpfc_scsi_dma_buf_pool;
	struct pci_pool *lpfc_mbuf_pool;
	struct pci_pool *lpfc_hbq_pool;
	struct lpfc_dma_pool lpfc_mbuf_safety_pool;

	mempool_t *mbox_mem_pool;
	mempool_t *nlp_mem_pool;

	struct fc_host_statistics link_stats;
	uint8_t using_msi;

	struct list_head port_list;
	struct lpfc_vport pport; / physical lpfc_vport pointer */
	uint16_t max_vpi; /* Maximum virtual nports */
	#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
	unsigned long vpi_bmask; / vpi allocation table */

	/* Data structure used by fabric iocb scheduler */
	struct list_head fabric_iocb_list;
	atomic_t fabric_iocb_count;
	struct timer_list fabric_block_timer;
	unsigned long bit_flags;
	#define FABRIC_COMANDS_BLOCKED 0
	atomic_t num_rsrc_err;
	atomic_t num_cmd_success;
	unsigned long last_rsrc_error_time;
	unsigned long last_ramp_down_time;
	unsigned long last_ramp_up_time;
	#ifdef CONFIG_LPFC_DEBUG_FS
	struct dentry *hba_debugfs_root;
	atomic_t debugfs_vport_count;
	struct dentry *debug_hbqinfo;
	struct dentry *debug_dumpHostSlim;
	struct dentry *debug_dumpHBASlim;
	struct dentry *debug_slow_ring_trc;
	struct lpfc_debugfs_trc *slow_ring_trc;
	atomic_t slow_ring_trc_cnt;
	#endif

	/* Used for deferred freeing of ELS data buffers */
	struct list_head elsbuf;
	int elsbuf_cnt;
	int elsbuf_prev_cnt;

	uint8_t temp_sensor_support;
	/* Fields used for heart beat. */
	unsigned long last_completion_time;
	struct timer_list hb_tmofunc;
	uint8_t hb_outstanding;
	/*
	* Following bit will be set for all buffer tags which are not
	* associated with any HBQ.
	*/
	#define QUE_BUFTAG_BIT (1<<31)
	uint32_t buffer_tag_count;
	enum hba_temp_state over_temp_state;
	};

	static inline struct Scsi_Host *
	lpfc_shost_from_vport(struct lpfc_vport *vport)
	{
	return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
	}

	static inline void
	lpfc_set_loopback_flag(struct lpfc_hba *phba)
	{
	if (phba->cfg_topology == FLAGS_LOCAL_LB)
	phba->link_flag \|= LS_LOOPBACK_MODE;
	else
	phba->link_flag &= ~LS_LOOPBACK_MODE;
	}

	static inline int
	lpfc_is_link_up(struct lpfc_hba *phba)
	{
	return phba->link_state == LPFC_LINK_UP \|\|
	phba->link_state == LPFC_CLEAR_LA \|\|
	phba->link_state == LPFC_HBA_READY;
	}

	#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */
	#define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature
	event */

	struct temp_event {
	uint32_t event_type;
	uint32_t event_code;
	uint32_t data;
	};
	#define LPFC_CRIT_TEMP 0x1
	#define LPFC_THRESHOLD_TEMP 0x2
	#define LPFC_NORMAL_TEMP 0x3