| /* |
| * IBM/AMCC PPC4xx SoC setup code |
| * |
| * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> |
| * |
| * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| * Copyright (c) 2003 - 2006 Zultys Technologies |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/dcr.h> |
| #include <asm/dcr-regs.h> |
| #include <asm/reg.h> |
| |
| static u32 dcrbase_l2c; |
| |
| /* |
| * L2-cache |
| */ |
| |
| /* Issue L2C diagnostic command */ |
| static inline u32 l2c_diag(u32 addr) |
| { |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); |
| while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) |
| ; |
| |
| return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); |
| } |
| |
| static irqreturn_t l2c_error_handler(int irq, void *dev) |
| { |
| u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); |
| |
| if (sr & L2C_SR_CPE) { |
| /* Read cache trapped address */ |
| u32 addr = l2c_diag(0x42000000); |
| printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", |
| addr); |
| } |
| if (sr & L2C_SR_TPE) { |
| /* Read tag trapped address */ |
| u32 addr = l2c_diag(0x82000000) >> 16; |
| printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", |
| addr); |
| } |
| |
| /* Clear parity errors */ |
| if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| } else { |
| printk(KERN_EMERG "L2C: LRU error\n"); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __init ppc4xx_l2c_probe(void) |
| { |
| struct device_node *np; |
| u32 r; |
| unsigned long flags; |
| int irq; |
| const u32 *dcrreg; |
| u32 dcrbase_isram; |
| int len; |
| const u32 *prop; |
| u32 l2_size; |
| |
| np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); |
| if (!np) |
| return 0; |
| |
| /* Get l2 cache size */ |
| prop = of_get_property(np, "cache-size", NULL); |
| if (prop == NULL) { |
| printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| l2_size = prop[0]; |
| |
| /* Map DCRs */ |
| dcrreg = of_get_property(np, "dcr-reg", &len); |
| if (!dcrreg || (len != 4 * sizeof(u32))) { |
| printk(KERN_ERR "%s: Can't get DCR register base !", |
| np->full_name); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| dcrbase_isram = dcrreg[0]; |
| dcrbase_l2c = dcrreg[2]; |
| |
| /* Get and map irq number from device tree */ |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq == NO_IRQ) { |
| printk(KERN_ERR "irq_of_parse_and_map failed\n"); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| /* Install error handler */ |
| if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { |
| printk(KERN_ERR "Cannot install L2C error handler" |
| ", cache is not enabled\n"); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| local_irq_save(flags); |
| asm volatile ("sync" ::: "memory"); |
| |
| /* Disable SRAM */ |
| mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, |
| mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, |
| mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); |
| |
| /* Enable L2_MODE without ICU/DCU */ |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & |
| ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); |
| r |= L2C_CFG_L2M | L2C_CFG_SS_256; |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); |
| |
| mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); |
| |
| /* Hardware Clear Command */ |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); |
| while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) |
| ; |
| |
| /* Clear Cache Parity and Tag Errors */ |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| |
| /* Enable 64G snoop region starting at 0 */ |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & |
| ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); |
| |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & |
| ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); |
| |
| asm volatile ("sync" ::: "memory"); |
| |
| /* Enable ICU/DCU ports */ |
| r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); |
| r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM |
| | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); |
| r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN |
| | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; |
| |
| /* Check for 460EX/GT special handling */ |
| if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) |
| r |= L2C_CFG_RDBW; |
| |
| mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); |
| |
| asm volatile ("sync; isync" ::: "memory"); |
| local_irq_restore(flags); |
| |
| printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); |
| |
| of_node_put(np); |
| return 0; |
| } |
| arch_initcall(ppc4xx_l2c_probe); |
| |
| /* |
| * At present, this routine just applies a system reset. |
| */ |
| void ppc4xx_reset_system(char *cmd) |
| { |
| mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM); |
| while (1) |
| ; /* Just in case the reset doesn't work */ |
| } |