Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 3c791925da0e6108cda15e3c2c7bfaebcd9ab9cf / . / drivers / message / fusion / mptctl.c
blob: bdf709987982b37509646e553f2482dd2d3d60c7 [file] [log] [blame]
/*
* linux/drivers/message/fusion/mptctl.c
* mpt Ioctl driver.
* For use with LSI Logic PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h> /* for mdelay */
#include <linux/miscdevice.h>
#include <linux/smp_lock.h>
#include <linux/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#define COPYRIGHT "Copyright (c) 1999-2005 LSI Logic Corporation"
#define MODULEAUTHOR "LSI Logic Corporation"
#include "mptbase.h"
#include "mptctl.h"
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#define my_NAME "Fusion MPT misc device (ioctl) driver"
#define my_VERSION MPT_LINUX_VERSION_COMMON
#define MYNAM "mptctl"
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int mptctl_id = -1;
static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
struct buflist {
u8 *kptr;
int len;
};
/*
* Function prototypes. Called from OS entry point mptctl_ioctl.
* arg contents specific to function.
*/
static int mptctl_fw_download(unsigned long arg);
static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd);
static int mptctl_gettargetinfo(unsigned long arg);
static int mptctl_readtest(unsigned long arg);
static int mptctl_mpt_command(unsigned long arg);
static int mptctl_eventquery(unsigned long arg);
static int mptctl_eventenable(unsigned long arg);
static int mptctl_eventreport(unsigned long arg);
static int mptctl_replace_fw(unsigned long arg);
static int mptctl_do_reset(unsigned long arg);
static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd);
static int mptctl_hp_targetinfo(unsigned long arg);
static int mptctl_probe(struct pci_dev *, const struct pci_device_id *);
static void mptctl_remove(struct pci_dev *);
#ifdef CONFIG_COMPAT
static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg);
#endif
/*
* Private function calls.
*/
static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr);
static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen);
static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags,
struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
struct buflist *buflist, MPT_ADAPTER *ioc);
static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
static int mptctl_bus_reset(MPT_IOCTL *ioctl);
static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd);
static void mptctl_free_tm_flags(MPT_ADAPTER *ioc);
/*
* Reset Handler cleanup function
*/
static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Scatter gather list (SGL) sizes and limits...
*/
//#define MAX_SCSI_FRAGS 9
#define MAX_FRAGS_SPILL1 9
#define MAX_FRAGS_SPILL2 15
#define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1)
//#define MAX_CHAIN_FRAGS 64
//#define MAX_CHAIN_FRAGS (15+15+15+16)
#define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1)
// Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each)
// Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8
// ^----------------- 80 + 512
#define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8)
/* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */
#define MAX_KMALLOC_SZ (128*1024)
#define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptctl_syscall_down - Down the MPT adapter syscall semaphore.
* @ioc: Pointer to MPT adapter
* @nonblock: boolean, non-zero if O_NONBLOCK is set
*
* All of the ioctl commands can potentially sleep, which is illegal
* with a spinlock held, thus we perform mutual exclusion here.
*
* Returns negative errno on error, or zero for success.
*/
static inline int
mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
{
int rc = 0;
dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down(%p,%d) called\n", ioc, nonblock));
if (nonblock) {
if (!mutex_trylock(&ioc->ioctl->ioctl_mutex))
rc = -EAGAIN;
} else {
if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex))
rc = -ERESTARTSYS;
}
dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down return %d\n", rc));
return rc;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* This is the callback for any message we have posted. The message itself
* will be returned to the message pool when we return from the IRQ
*
* This runs in irq context so be short and sweet.
*/
static int
mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
{
char *sense_data;
int sz, req_index;
u16 iocStatus;
u8 cmd;
dctlprintk(("mptctl_reply()!\n"));
if (req)
cmd = req->u.hdr.Function;
else
return 1;
if (ioc->ioctl) {
if (reply==NULL) {
dctlprintk(("mptctl_reply() NULL Reply "
"Function=%x!\n", cmd));
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
/* We are done, issue wake up
*/
ioc->ioctl->wait_done = 1;
wake_up (&mptctl_wait);
return 1;
}
dctlprintk(("mptctl_reply() with req=%p "
"reply=%p Function=%x!\n", req, reply, cmd));
/* Copy the reply frame (which much exist
* for non-SCSI I/O) to the IOC structure.
*/
dctlprintk(("Copying Reply Frame @%p to ioc%d!\n",
reply, ioc->id));
memcpy(ioc->ioctl->ReplyFrame, reply,
min(ioc->reply_sz, 4*reply->u.reply.MsgLength));
ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID;
/* Set the command status to GOOD if IOC Status is GOOD
* OR if SCSI I/O cmd and data underrun or recovered error.
*/
iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocStatus == MPI_IOCSTATUS_SUCCESS)
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
(cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) ||
(iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) {
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
}
}
/* Copy the sense data - if present
*/
if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) &&
(reply->u.sreply.SCSIState &
MPI_SCSI_STATE_AUTOSENSE_VALID)){
sz = req->u.scsireq.SenseBufferLength;
req_index =
le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
sense_data =
((u8 *)ioc->sense_buf_pool +
(req_index * MPT_SENSE_BUFFER_ALLOC));
memcpy(ioc->ioctl->sense, sense_data, sz);
ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID;
}
if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT)
mptctl_free_tm_flags(ioc);
/* We are done, issue wake up
*/
ioc->ioctl->wait_done = 1;
wake_up (&mptctl_wait);
}
return 1;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mptctl_timeout_expired
*
* Expecting an interrupt, however timed out.
*
*/
static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
{
int rc = 1;
dctlprintk((KERN_NOTICE MYNAM ": Timeout Expired! Host %d\n",
ioctl->ioc->id));
if (ioctl == NULL)
return;
ioctl->wait_done = 0;
if (ioctl->reset & MPTCTL_RESET_OK)
rc = mptctl_bus_reset(ioctl);
if (rc) {
/* Issue a reset for this device.
* The IOC is not responding.
*/
dctlprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
ioctl->ioc->name));
mpt_HardResetHandler(ioctl->ioc, NO_SLEEP);
}
return;
}
/* mptctl_bus_reset
*
* Bus reset code.
*
*/
static int mptctl_bus_reset(MPT_IOCTL *ioctl)
{
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
MPT_SCSI_HOST *hd;
int ii;
int retval;
ioctl->reset &= ~MPTCTL_RESET_OK;
if (ioctl->ioc->sh == NULL)
return -EPERM;
hd = (MPT_SCSI_HOST *) ioctl->ioc->sh->hostdata;
if (hd == NULL)
return -EPERM;
/* Single threading ....
*/
if (mptctl_set_tm_flags(hd) != 0)
return -EPERM;
/* Send request
*/
if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) {
dctlprintk((MYIOC_s_WARN_FMT "IssueTaskMgmt, no msg frames!!\n",
ioctl->ioc->name));
mptctl_free_tm_flags(ioctl->ioc);
return -ENOMEM;
}
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
ioctl->ioc->name, mf));
pScsiTm = (SCSITaskMgmt_t *) mf;
pScsiTm->TargetID = ioctl->target;
pScsiTm->Bus = hd->port; /* 0 */
pScsiTm->ChainOffset = 0;
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
pScsiTm->Reserved = 0;
pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS;
pScsiTm->Reserved1 = 0;
pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
for (ii= 0; ii < 8; ii++)
pScsiTm->LUN[ii] = 0;
for (ii=0; ii < 7; ii++)
pScsiTm->Reserved2[ii] = 0;
pScsiTm->TaskMsgContext = 0;
dtmprintk((MYIOC_s_INFO_FMT
"mptctl_bus_reset: issued.\n", ioctl->ioc->name));
DBG_DUMP_TM_REQUEST_FRAME((u32 *)mf);
ioctl->wait_done=0;
if ((retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc,
sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) {
dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!"
" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
hd->ioc, mf));
goto mptctl_bus_reset_done;
}
/* Now wait for the command to complete */
ii = wait_event_interruptible_timeout(mptctl_wait,
ioctl->wait_done == 1,
HZ*5 /* 5 second timeout */);
if(ii <=0 && (ioctl->wait_done != 1 )) {
ioctl->wait_done = 0;
retval = -1; /* return failure */
}
mptctl_bus_reset_done:
mpt_free_msg_frame(hd->ioc, mf);
mptctl_free_tm_flags(ioctl->ioc);
return retval;
}
static int
mptctl_set_tm_flags(MPT_SCSI_HOST *hd) {
unsigned long flags;
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
if (hd->tmState == TM_STATE_NONE) {
hd->tmState = TM_STATE_IN_PROGRESS;
hd->tmPending = 1;
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
} else {
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
return -EBUSY;
}
return 0;
}
static void
mptctl_free_tm_flags(MPT_ADAPTER *ioc)
{
MPT_SCSI_HOST * hd;
unsigned long flags;
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
if (hd == NULL)
return;
spin_lock_irqsave(&ioc->FreeQlock, flags);
hd->tmState = TM_STATE_NONE;
hd->tmPending = 0;
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
return;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mptctl_ioc_reset
*
* Clean-up functionality. Used only if there has been a
* reload of the FW due.
*
*/
static int
mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
MPT_IOCTL *ioctl = ioc->ioctl;
dctlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to IOCTL driver!\n",
reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
if(ioctl == NULL)
return 1;
switch(reset_phase) {
case MPT_IOC_SETUP_RESET:
ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET;
break;
case MPT_IOC_POST_RESET:
ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET;
break;
case MPT_IOC_PRE_RESET:
default:
break;
}
return 1;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MPT ioctl handler
* cmd - specify the particular IOCTL command to be issued
* arg - data specific to the command. Must not be null.
*/
static long
__mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
mpt_ioctl_header __user *uhdr = (void __user *) arg;
mpt_ioctl_header khdr;
int iocnum;
unsigned iocnumX;
int nonblock = (file->f_flags & O_NONBLOCK);
int ret;
MPT_ADAPTER *iocp = NULL;
dctlprintk(("mptctl_ioctl() called\n"));
if (copy_from_user(&khdr, uhdr, sizeof(khdr))) {
printk(KERN_ERR "%s::mptctl_ioctl() @%d - "
"Unable to copy mpt_ioctl_header data @ %p\n",
__FILE__, __LINE__, uhdr);
return -EFAULT;
}
ret = -ENXIO; /* (-6) No such device or address */
/* Verify intended MPT adapter - set iocnum and the adapter
* pointer (iocp)
*/
iocnumX = khdr.iocnum & 0xFF;
if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
(iocp == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_ioctl() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnumX));
return -ENODEV;
}
if (!iocp->active) {
printk(KERN_ERR "%s::mptctl_ioctl() @%d - Controller disabled.\n",
__FILE__, __LINE__);
return -EFAULT;
}
/* Handle those commands that are just returning
* information stored in the driver.
* These commands should never time out and are unaffected
* by TM and FW reloads.
*/
if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) {
return mptctl_getiocinfo(arg, _IOC_SIZE(cmd));
} else if (cmd == MPTTARGETINFO) {
return mptctl_gettargetinfo(arg);
} else if (cmd == MPTTEST) {
return mptctl_readtest(arg);
} else if (cmd == MPTEVENTQUERY) {
return mptctl_eventquery(arg);
} else if (cmd == MPTEVENTENABLE) {
return mptctl_eventenable(arg);
} else if (cmd == MPTEVENTREPORT) {
return mptctl_eventreport(arg);
} else if (cmd == MPTFWREPLACE) {
return mptctl_replace_fw(arg);
}
/* All of these commands require an interrupt or
* are unknown/illegal.
*/
if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
return ret;
dctlprintk((MYIOC_s_INFO_FMT ": mptctl_ioctl()\n", iocp->name));
if (cmd == MPTFWDOWNLOAD)
ret = mptctl_fw_download(arg);
else if (cmd == MPTCOMMAND)
ret = mptctl_mpt_command(arg);
else if (cmd == MPTHARDRESET)
ret = mptctl_do_reset(arg);
else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK))
ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd));
else if (cmd == HP_GETTARGETINFO)
ret = mptctl_hp_targetinfo(arg);
else
ret = -EINVAL;
mutex_unlock(&iocp->ioctl->ioctl_mutex);
return ret;
}
static long
mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = __mptctl_ioctl(file, cmd, arg);
unlock_kernel();
return ret;
}
static int mptctl_do_reset(unsigned long arg)
{
struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg;
struct mpt_ioctl_diag_reset krinfo;
MPT_ADAPTER *iocp;
dctlprintk((KERN_INFO "mptctl_do_reset called.\n"));
if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) {
printk(KERN_ERR "%s@%d::mptctl_do_reset - "
"Unable to copy mpt_ioctl_diag_reset struct @ %p\n",
__FILE__, __LINE__, urinfo);
return -EFAULT;
}
if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) {
dctlprintk((KERN_ERR "%s@%d::mptctl_do_reset - ioc%d not found!\n",
__FILE__, __LINE__, krinfo.hdr.iocnum));
return -ENODEV; /* (-6) No such device or address */
}
if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) {
printk (KERN_ERR "%s@%d::mptctl_do_reset - reset failed.\n",
__FILE__, __LINE__);
return -1;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MPT FW download function. Cast the arg into the mpt_fw_xfer structure.
* This structure contains: iocnum, firmware length (bytes),
* pointer to user space memory where the fw image is stored.
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENXIO if no such device
* -EAGAIN if resource problem
* -ENOMEM if no memory for SGE
* -EMLINK if too many chain buffers required
* -EBADRQC if adapter does not support FW download
* -EBUSY if adapter is busy
* -ENOMSG if FW upload returned bad status
*/
static int
mptctl_fw_download(unsigned long arg)
{
struct mpt_fw_xfer __user *ufwdl = (void __user *) arg;
struct mpt_fw_xfer kfwdl;
dctlprintk((KERN_INFO "mptctl_fwdl called. mptctl_id = %xh\n", mptctl_id)); //tc
if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) {
printk(KERN_ERR "%s@%d::_ioctl_fwdl - "
"Unable to copy mpt_fw_xfer struct @ %p\n",
__FILE__, __LINE__, ufwdl);
return -EFAULT;
}
return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* FW Download engine.
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENXIO if no such device
* -EAGAIN if resource problem
* -ENOMEM if no memory for SGE
* -EMLINK if too many chain buffers required
* -EBADRQC if adapter does not support FW download
* -EBUSY if adapter is busy
* -ENOMSG if FW upload returned bad status
*/
static int
mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
{
FWDownload_t *dlmsg;
MPT_FRAME_HDR *mf;
MPT_ADAPTER *iocp;
FWDownloadTCSGE_t *ptsge;
MptSge_t *sgl, *sgIn;
char *sgOut;
struct buflist *buflist;
struct buflist *bl;
dma_addr_t sgl_dma;
int ret;
int numfrags = 0;
int maxfrags;
int n = 0;
u32 sgdir;
u32 nib;
int fw_bytes_copied = 0;
int i;
int sge_offset = 0;
u16 iocstat;
pFWDownloadReply_t ReplyMsg = NULL;
dctlprintk((KERN_INFO "mptctl_do_fwdl called. mptctl_id = %xh.\n", mptctl_id));
dctlprintk((KERN_INFO "DbG: kfwdl.bufp = %p\n", ufwbuf));
dctlprintk((KERN_INFO "DbG: kfwdl.fwlen = %d\n", (int)fwlen));
dctlprintk((KERN_INFO "DbG: kfwdl.ioc = %04xh\n", ioc));
if ((ioc = mpt_verify_adapter(ioc, &iocp)) < 0) {
dctlprintk(("%s@%d::_ioctl_fwdl - ioc%d not found!\n",
__FILE__, __LINE__, ioc));
return -ENODEV; /* (-6) No such device or address */
}
/* Valid device. Get a message frame and construct the FW download message.
*/
if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL)
return -EAGAIN;
dlmsg = (FWDownload_t*) mf;
ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL;
sgOut = (char *) (ptsge + 1);
/*
* Construct f/w download request
*/
dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW;
dlmsg->Reserved = 0;
dlmsg->ChainOffset = 0;
dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD;
dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0;
dlmsg->MsgFlags = 0;
/* Set up the Transaction SGE.
*/
ptsge->Reserved = 0;
ptsge->ContextSize = 0;
ptsge->DetailsLength = 12;
ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
ptsge->Reserved_0100_Checksum = 0;
ptsge->ImageOffset = 0;
ptsge->ImageSize = cpu_to_le32(fwlen);
/* Add the SGL
*/
/*
* Need to kmalloc area(s) for holding firmware image bytes.
* But we need to do it piece meal, using a proper
* scatter gather list (with 128kB MAX hunks).
*
* A practical limit here might be # of sg hunks that fit into
* a single IOC request frame; 12 or 8 (see below), so:
* For FC9xx: 12 x 128kB == 1.5 mB (max)
* For C1030: 8 x 128kB == 1 mB (max)
* We could support chaining, but things get ugly(ier:)
*
* Set the sge_offset to the start of the sgl (bytes).
*/
sgdir = 0x04000000; /* IOC will READ from sys mem */
sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t);
if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset,
&numfrags, &buflist, &sgl_dma, iocp)) == NULL)
return -ENOMEM;
/*
* We should only need SGL with 2 simple_32bit entries (up to 256 kB)
* for FC9xx f/w image, but calculate max number of sge hunks
* we can fit into a request frame, and limit ourselves to that.
* (currently no chain support)
* maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE
* Request maxfrags
* 128 12
* 96 8
* 64 4
*/
maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t))
/ (sizeof(dma_addr_t) + sizeof(u32));
if (numfrags > maxfrags) {
ret = -EMLINK;
goto fwdl_out;
}
dctlprintk((KERN_INFO "DbG: sgl buffer = %p, sgfrags = %d\n", sgl, numfrags));
/*
* Parse SG list, copying sgl itself,
* plus f/w image hunks from user space as we go...
*/
ret = -EFAULT;
sgIn = sgl;
bl = buflist;
for (i=0; i < numfrags; i++) {
/* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE
* Skip everything but Simple. If simple, copy from
* user space into kernel space.
* Note: we should not have anything but Simple as
* Chain SGE are illegal.
*/
nib = (sgIn->FlagsLength & 0x30000000) >> 28;
if (nib == 0 || nib == 3) {
;
} else if (sgIn->Address) {
mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
n++;
if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
printk(KERN_ERR "%s@%d::_ioctl_fwdl - "
"Unable to copy f/w buffer hunk#%d @ %p\n",
__FILE__, __LINE__, n, ufwbuf);
goto fwdl_out;
}
fw_bytes_copied += bl->len;
}
sgIn++;
bl++;
sgOut += (sizeof(dma_addr_t) + sizeof(u32));
}
#ifdef MPT_DEBUG
{
u32 *m = (u32 *)mf;
printk(KERN_INFO MYNAM ": F/W download request:\n" KERN_INFO " ");
for (i=0; i < 7+numfrags*2; i++)
printk(" %08x", le32_to_cpu(m[i]));
printk("\n");
}
#endif
/*
* Finally, perform firmware download.
*/
iocp->ioctl->wait_done = 0;
mpt_put_msg_frame(mptctl_id, iocp, mf);
/* Now wait for the command to complete */
ret = wait_event_interruptible_timeout(mptctl_wait,
iocp->ioctl->wait_done == 1,
HZ*60);
if(ret <=0 && (iocp->ioctl->wait_done != 1 )) {
/* Now we need to reset the board */
mptctl_timeout_expired(iocp->ioctl);
ret = -ENODATA;
goto fwdl_out;
}
if (sgl)
kfree_sgl(sgl, sgl_dma, buflist, iocp);
ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame;
iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocstat == MPI_IOCSTATUS_SUCCESS) {
printk(KERN_INFO MYNAM ": F/W update successfully sent to %s!\n", iocp->name);
return 0;
} else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
printk(KERN_WARNING MYNAM ": ?Hmmm... %s says it doesn't support F/W download!?!\n",
iocp->name);
printk(KERN_WARNING MYNAM ": (time to go bang on somebodies door)\n");
return -EBADRQC;
} else if (iocstat == MPI_IOCSTATUS_BUSY) {
printk(KERN_WARNING MYNAM ": Warning! %s says: IOC_BUSY!\n", iocp->name);
printk(KERN_WARNING MYNAM ": (try again later?)\n");
return -EBUSY;
} else {
printk(KERN_WARNING MYNAM "::ioctl_fwdl() ERROR! %s returned [bad] status = %04xh\n",
iocp->name, iocstat);
printk(KERN_WARNING MYNAM ": (bad VooDoo)\n");
return -ENOMSG;
}
return 0;
fwdl_out:
kfree_sgl(sgl, sgl_dma, buflist, iocp);
return ret;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* SGE Allocation routine
*
* Inputs: bytes - number of bytes to be transferred
* sgdir - data direction
* sge_offset - offset (in bytes) from the start of the request
* frame to the first SGE
* ioc - pointer to the mptadapter
* Outputs: frags - number of scatter gather elements
* blp - point to the buflist pointer
* sglbuf_dma - pointer to the (dma) sgl
* Returns: Null if failes
* pointer to the (virtual) sgl if successful.
*/
static MptSge_t *
kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc)
{
MptSge_t *sglbuf = NULL; /* pointer to array of SGE */
/* and chain buffers */
struct buflist *buflist = NULL; /* kernel routine */
MptSge_t *sgl;
int numfrags = 0;
int fragcnt = 0;
int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg!
int bytes_allocd = 0;
int this_alloc;
dma_addr_t pa; // phys addr
int i, buflist_ent;
int sg_spill = MAX_FRAGS_SPILL1;
int dir;
/* initialization */
*frags = 0;
*blp = NULL;
/* Allocate and initialize an array of kernel
* structures for the SG elements.
*/
i = MAX_SGL_BYTES / 8;
buflist = kmalloc(i, GFP_USER);
if (buflist == NULL)
return NULL;
memset(buflist, 0, i);
buflist_ent = 0;
/* Allocate a single block of memory to store the sg elements and
* the chain buffers. The calling routine is responsible for
* copying the data in this array into the correct place in the
* request and chain buffers.
*/
sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma);
if (sglbuf == NULL)
goto free_and_fail;
if (sgdir & 0x04000000)
dir = PCI_DMA_TODEVICE;
else
dir = PCI_DMA_FROMDEVICE;
/* At start:
* sgl = sglbuf = point to beginning of sg buffer
* buflist_ent = 0 = first kernel structure
* sg_spill = number of SGE that can be written before the first
* chain element.
*
*/
sgl = sglbuf;
sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1;
while (bytes_allocd < bytes) {
this_alloc = min(alloc_sz, bytes-bytes_allocd);
buflist[buflist_ent].len = this_alloc;
buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev,
this_alloc,
&pa);
if (buflist[buflist_ent].kptr == NULL) {
alloc_sz = alloc_sz / 2;
if (alloc_sz == 0) {
printk(KERN_WARNING MYNAM "-SG: No can do - "
"not enough memory! :-(\n");
printk(KERN_WARNING MYNAM "-SG: (freeing %d frags)\n",
numfrags);
goto free_and_fail;
}
continue;
} else {
dma_addr_t dma_addr;
bytes_allocd += this_alloc;
sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc);
dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir);
sgl->Address = dma_addr;
fragcnt++;
numfrags++;
sgl++;
buflist_ent++;
}
if (bytes_allocd >= bytes)
break;
/* Need to chain? */
if (fragcnt == sg_spill) {
printk(KERN_WARNING MYNAM "-SG: No can do - " "Chain required! :-(\n");
printk(KERN_WARNING MYNAM "(freeing %d frags)\n", numfrags);
goto free_and_fail;
}
/* overflow check... */
if (numfrags*8 > MAX_SGL_BYTES){
/* GRRRRR... */
printk(KERN_WARNING MYNAM "-SG: No can do - "
"too many SG frags! :-(\n");
printk(KERN_WARNING MYNAM "-SG: (freeing %d frags)\n",
numfrags);
goto free_and_fail;
}
}
/* Last sge fixup: set LE+eol+eob bits */
sgl[-1].FlagsLength |= 0xC1000000;
*frags = numfrags;
*blp = buflist;
dctlprintk((KERN_INFO MYNAM "-SG: kbuf_alloc_2_sgl() - "
"%d SG frags generated!\n",
numfrags));
dctlprintk((KERN_INFO MYNAM "-SG: kbuf_alloc_2_sgl() - "
"last (big) alloc_sz=%d\n",
alloc_sz));
return sglbuf;
free_and_fail:
if (sglbuf != NULL) {
int i;
for (i = 0; i < numfrags; i++) {
dma_addr_t dma_addr;
u8 *kptr;
int len;
if ((sglbuf[i].FlagsLength >> 24) == 0x30)
continue;
dma_addr = sglbuf[i].Address;
kptr = buflist[i].kptr;
len = buflist[i].len;
pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
}
pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma);
}
kfree(buflist);
return NULL;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Routine to free the SGL elements.
*/
static void
kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc)
{
MptSge_t *sg = sgl;
struct buflist *bl = buflist;
u32 nib;
int dir;
int n = 0;
if (sg->FlagsLength & 0x04000000)
dir = PCI_DMA_TODEVICE;
else
dir = PCI_DMA_FROMDEVICE;
nib = (sg->FlagsLength & 0xF0000000) >> 28;
while (! (nib & 0x4)) { /* eob */
/* skip ignore/chain. */
if (nib == 0 || nib == 3) {
;
} else if (sg->Address) {
dma_addr_t dma_addr;
void *kptr;
int len;
dma_addr = sg->Address;
kptr = bl->kptr;
len = bl->len;
pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
n++;
}
sg++;
bl++;
nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28;
}
/* we're at eob! */
if (sg->Address) {
dma_addr_t dma_addr;
void *kptr;
int len;
dma_addr = sg->Address;
kptr = bl->kptr;
len = bl->len;
pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
n++;
}
pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma);
kfree(buflist);
dctlprintk((KERN_INFO MYNAM "-SG: Free'd 1 SGL buf + %d kbufs!\n", n));
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptctl_getiocinfo - Query the host adapter for IOC information.
* @arg: User space argument
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
*/
static int
mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
{
struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg;
struct mpt_ioctl_iocinfo *karg;
MPT_ADAPTER *ioc;
struct pci_dev *pdev;
struct Scsi_Host *sh;
MPT_SCSI_HOST *hd;
int iocnum;
int numDevices = 0;
unsigned int max_id;
int ii;
unsigned int port;
int cim_rev;
u8 revision;
dctlprintk((": mptctl_getiocinfo called.\n"));
/* Add of PCI INFO results in unaligned access for
* IA64 and Sparc. Reset long to int. Return no PCI
* data for obsolete format.
*/
if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0))
cim_rev = 0;
else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1))
cim_rev = 1;
else if (data_size == sizeof(struct mpt_ioctl_iocinfo))
cim_rev = 2;
else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12))
cim_rev = 0; /* obsolete */
else
return -EFAULT;
karg = kmalloc(data_size, GFP_KERNEL);
if (karg == NULL) {
printk(KERN_ERR "%s::mpt_ioctl_iocinfo() @%d - no memory available!\n",
__FILE__, __LINE__);
return -ENOMEM;
}
if (copy_from_user(karg, uarg, data_size)) {
printk(KERN_ERR "%s@%d::mptctl_getiocinfo - "
"Unable to read in mpt_ioctl_iocinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
kfree(karg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
kfree(karg);
return -ENODEV;
}
/* Verify the data transfer size is correct. */
if (karg->hdr.maxDataSize != data_size) {
printk(KERN_ERR "%s@%d::mptctl_getiocinfo - "
"Structure size mismatch. Command not completed.\n",
__FILE__, __LINE__);
kfree(karg);
return -EFAULT;
}
/* Fill in the data and return the structure to the calling
* program
*/
if (ioc->bus_type == FC)
karg->adapterType = MPT_IOCTL_INTERFACE_FC;
else
karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
if (karg->hdr.port > 1)
return -EINVAL;
port = karg->hdr.port;
karg->port = port;
pdev = (struct pci_dev *) ioc->pcidev;
karg->pciId = pdev->device;
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
karg->hwRev = revision;
karg->subSystemDevice = pdev->subsystem_device;
karg->subSystemVendor = pdev->subsystem_vendor;
if (cim_rev == 1) {
/* Get the PCI bus, device, and function numbers for the IOC
*/
karg->pciInfo.u.bits.busNumber = pdev->bus->number;
karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
} else if (cim_rev == 2) {
/* Get the PCI bus, device, function and segment ID numbers
for the IOC */
karg->pciInfo.u.bits.busNumber = pdev->bus->number;
karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
karg->pciInfo.segmentID = pci_domain_nr(pdev->bus);
}
/* Get number of devices
*/
if ((sh = ioc->sh) != NULL) {
/* sh->max_id = maximum target ID + 1
*/
max_id = sh->max_id - 1;
hd = (MPT_SCSI_HOST *) sh->hostdata;
/* Check all of the target structures and
* keep a counter.
*/
if (hd && hd->Targets) {
for (ii = 0; ii <= max_id; ii++) {
if (hd->Targets[ii])
numDevices++;
}
}
}
karg->numDevices = numDevices;
/* Set the BIOS and FW Version
*/
karg->FWVersion = ioc->facts.FWVersion.Word;
karg->BIOSVersion = ioc->biosVersion;
/* Set the Version Strings.
*/
strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH);
karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0';
karg->busChangeEvent = 0;
karg->hostId = ioc->pfacts[port].PortSCSIID;
karg->rsvd[0] = karg->rsvd[1] = 0;
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, karg, data_size)) {
printk(KERN_ERR "%s@%d::mptctl_getiocinfo - "
"Unable to write out mpt_ioctl_iocinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
kfree(karg);
return -EFAULT;
}
kfree(karg);
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptctl_gettargetinfo - Query the host adapter for target information.
* @arg: User space argument
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
*/
static int
mptctl_gettargetinfo (unsigned long arg)
{
struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg;
struct mpt_ioctl_targetinfo karg;
MPT_ADAPTER *ioc;
struct Scsi_Host *sh;
MPT_SCSI_HOST *hd;
VirtTarget *vdev;
char *pmem;
int *pdata;
IOCPage2_t *pIoc2;
IOCPage3_t *pIoc3;
int iocnum;
int numDevices = 0;
unsigned int max_id;
int id, jj, indexed_lun, lun_index;
u32 lun;
int maxWordsLeft;
int numBytes;
u8 port, devType, bus_id;
dctlprintk(("mptctl_gettargetinfo called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) {
printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - "
"Unable to read in mpt_ioctl_targetinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
/* Get the port number and set the maximum number of bytes
* in the returned structure.
* Ignore the port setting.
*/
numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
maxWordsLeft = numBytes/sizeof(int);
port = karg.hdr.port;
if (maxWordsLeft <= 0) {
printk(KERN_ERR "%s::mptctl_gettargetinfo() @%d - no memory available!\n",
__FILE__, __LINE__);
return -ENOMEM;
}
/* Fill in the data and return the structure to the calling
* program
*/
/* struct mpt_ioctl_targetinfo does not contain sufficient space
* for the target structures so when the IOCTL is called, there is
* not sufficient stack space for the structure. Allocate memory,
* populate the memory, copy back to the user, then free memory.
* targetInfo format:
* bits 31-24: reserved
* 23-16: LUN
* 15- 8: Bus Number
* 7- 0: Target ID
*/
pmem = kmalloc(numBytes, GFP_KERNEL);
if (pmem == NULL) {
printk(KERN_ERR "%s::mptctl_gettargetinfo() @%d - no memory available!\n",
__FILE__, __LINE__);
return -ENOMEM;
}
memset(pmem, 0, numBytes);
pdata = (int *) pmem;
/* Get number of devices
*/
if ((sh = ioc->sh) != NULL) {
max_id = sh->max_id - 1;
hd = (MPT_SCSI_HOST *) sh->hostdata;
/* Check all of the target structures.
* Save the Id and increment the counter,
* if ptr non-null.
* sh->max_id = maximum target ID + 1
*/
if (hd && hd->Targets) {
mpt_findImVolumes(ioc);
pIoc2 = ioc->raid_data.pIocPg2;
for ( id = 0; id <= max_id; ) {
if ( pIoc2 && pIoc2->NumActiveVolumes ) {
if ( id == pIoc2->RaidVolume[0].VolumeID ) {
if (maxWordsLeft <= 0) {
printk(KERN_ERR "mptctl_gettargetinfo - "
"buffer is full but volume is available on ioc %d\n, numDevices=%d", iocnum, numDevices);
goto data_space_full;
}
if ( ( pIoc2->RaidVolume[0].Flags & MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE ) == 0 )
devType = 0x80;
else
devType = 0xC0;
bus_id = pIoc2->RaidVolume[0].VolumeBus;
numDevices++;
*pdata = ( (devType << 24) | (bus_id << 8) | id );
dctlprintk((KERN_ERR "mptctl_gettargetinfo - "
"volume ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata));
pdata++;
--maxWordsLeft;
goto next_id;
} else {
pIoc3 = ioc->raid_data.pIocPg3;
for ( jj = 0; jj < pIoc3->NumPhysDisks; jj++ ) {
if ( pIoc3->PhysDisk[jj].PhysDiskID == id )
goto next_id;
}
}
}
if ( (vdev = hd->Targets[id]) ) {
for (jj = 0; jj <= MPT_LAST_LUN; jj++) {
lun_index = (jj >> 5);
indexed_lun = (jj % 32);
lun = (1 << indexed_lun);
if (vdev->luns[lun_index] & lun) {
if (maxWordsLeft <= 0) {
printk(KERN_ERR "mptctl_gettargetinfo - "
"buffer is full but more targets are available on ioc %d numDevices=%d\n", iocnum, numDevices);
goto data_space_full;
}
bus_id = vdev->bus_id;
numDevices++;
*pdata = ( (jj << 16) | (bus_id << 8) | id );
dctlprintk((KERN_ERR "mptctl_gettargetinfo - "
"target ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata));
pdata++;
--maxWordsLeft;
}
}
}
next_id:
id++;
}
}
}
data_space_full:
karg.numDevices = numDevices;
/* Copy part of the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg,
sizeof(struct mpt_ioctl_targetinfo))) {
printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - "
"Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
kfree(pmem);
return -EFAULT;
}
/* Copy the remaining data from kernel memory to user memory
*/
if (copy_to_user(uarg->targetInfo, pmem, numBytes)) {
printk(KERN_ERR "%s@%d::mptctl_gettargetinfo - "
"Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
__FILE__, __LINE__, pdata);
kfree(pmem);
return -EFAULT;
}
kfree(pmem);
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* MPT IOCTL Test function.
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
*/
static int
mptctl_readtest (unsigned long arg)
{
struct mpt_ioctl_test __user *uarg = (void __user *) arg;
struct mpt_ioctl_test karg;
MPT_ADAPTER *ioc;
int iocnum;
dctlprintk(("mptctl_readtest called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) {
printk(KERN_ERR "%s@%d::mptctl_readtest - "
"Unable to read in mpt_ioctl_test struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_readtest() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
/* Fill in the data and return the structure to the calling
* program
*/
#ifdef MFCNT
karg.chip_type = ioc->mfcnt;
#else
karg.chip_type = ioc->pcidev->device;
#endif
strncpy (karg.name, ioc->name, MPT_MAX_NAME);
karg.name[MPT_MAX_NAME-1]='\0';
strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH);
karg.product[MPT_PRODUCT_LENGTH-1]='\0';
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) {
printk(KERN_ERR "%s@%d::mptctl_readtest - "
"Unable to write out mpt_ioctl_test struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptctl_eventquery - Query the host adapter for the event types
* that are being logged.
* @arg: User space argument
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
*/
static int
mptctl_eventquery (unsigned long arg)
{
struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg;
struct mpt_ioctl_eventquery karg;
MPT_ADAPTER *ioc;
int iocnum;
dctlprintk(("mptctl_eventquery called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) {
printk(KERN_ERR "%s@%d::mptctl_eventquery - "
"Unable to read in mpt_ioctl_eventquery struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_eventquery() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
karg.eventEntries = ioc->eventLogSize;
karg.eventTypes = ioc->eventTypes;
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) {
printk(KERN_ERR "%s@%d::mptctl_eventquery - "
"Unable to write out mpt_ioctl_eventquery struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int
mptctl_eventenable (unsigned long arg)
{
struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg;
struct mpt_ioctl_eventenable karg;
MPT_ADAPTER *ioc;
int iocnum;
dctlprintk(("mptctl_eventenable called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) {
printk(KERN_ERR "%s@%d::mptctl_eventenable - "
"Unable to read in mpt_ioctl_eventenable struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_eventenable() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
if (ioc->events == NULL) {
/* Have not yet allocated memory - do so now.
*/
int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
ioc->events = kmalloc(sz, GFP_KERNEL);
if (ioc->events == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
return -ENOMEM;
}
memset(ioc->events, 0, sz);
ioc->alloc_total += sz;
ioc->eventLogSize = MPTCTL_EVENT_LOG_SIZE;
ioc->eventContext = 0;
}
/* Update the IOC event logging flag.
*/
ioc->eventTypes = karg.eventTypes;
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int
mptctl_eventreport (unsigned long arg)
{
struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg;
struct mpt_ioctl_eventreport karg;
MPT_ADAPTER *ioc;
int iocnum;
int numBytes, maxEvents, max;
dctlprintk(("mptctl_eventreport called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) {
printk(KERN_ERR "%s@%d::mptctl_eventreport - "
"Unable to read in mpt_ioctl_eventreport struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_eventreport() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS);
max = ioc->eventLogSize < maxEvents ? ioc->eventLogSize : maxEvents;
/* If fewer than 1 event is requested, there must have
* been some type of error.
*/
if ((max < 1) || !ioc->events)
return -ENODATA;
/* Copy the data from kernel memory to user memory
*/
numBytes = max * sizeof(MPT_IOCTL_EVENTS);
if (copy_to_user(uarg->eventData, ioc->events, numBytes)) {
printk(KERN_ERR "%s@%d::mptctl_eventreport - "
"Unable to write out mpt_ioctl_eventreport struct @ %p\n",
__FILE__, __LINE__, ioc->events);
return -EFAULT;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int
mptctl_replace_fw (unsigned long arg)
{
struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg;
struct mpt_ioctl_replace_fw karg;
MPT_ADAPTER *ioc;
int iocnum;
int newFwSize;
dctlprintk(("mptctl_replace_fw called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) {
printk(KERN_ERR "%s@%d::mptctl_replace_fw - "
"Unable to read in mpt_ioctl_replace_fw struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_replace_fw() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
/* If caching FW, Free the old FW image
*/
if (ioc->cached_fw == NULL)
return 0;
mpt_free_fw_memory(ioc);
/* Allocate memory for the new FW image
*/
newFwSize = karg.newImageSize;
if (newFwSize & 0x01)
newFwSize += 1;
if (newFwSize & 0x02)
newFwSize += 2;
mpt_alloc_fw_memory(ioc, newFwSize);
if (ioc->cached_fw == NULL)
return -ENOMEM;
/* Copy the data from user memory to kernel space
*/
if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) {
printk(KERN_ERR "%s@%d::mptctl_replace_fw - "
"Unable to read in mpt_ioctl_replace_fw image "
"@ %p\n", __FILE__, __LINE__, uarg);
mpt_free_fw_memory(ioc);
return -EFAULT;
}
/* Update IOCFactsReply
*/
ioc->facts.FWImageSize = newFwSize;
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* MPT IOCTL MPTCOMMAND function.
* Cast the arg into the mpt_ioctl_mpt_command structure.
*
* Outputs: None.
* Return: 0 if successful
* -EBUSY if previous command timout and IOC reset is not complete.
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
*/
static int
mptctl_mpt_command (unsigned long arg)
{
struct mpt_ioctl_command __user *uarg = (void __user *) arg;
struct mpt_ioctl_command karg;
MPT_ADAPTER *ioc;
int iocnum;
int rc;
dctlprintk(("mptctl_command called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) {
printk(KERN_ERR "%s@%d::mptctl_mpt_command - "
"Unable to read in mpt_ioctl_command struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_mpt_command() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
rc = mptctl_do_mpt_command (karg, &uarg->MF);
return rc;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands.
*
* Outputs: None.
* Return: 0 if successful
* -EBUSY if previous command timout and IOC reset is not complete.
* -EFAULT if data unavailable
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
* -EPERM if SCSI I/O and target is untagged
*/
static int
mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
{
MPT_ADAPTER *ioc;
MPT_FRAME_HDR *mf = NULL;
MPIHeader_t *hdr;
char *psge;
struct buflist bufIn; /* data In buffer */
struct buflist bufOut; /* data Out buffer */
dma_addr_t dma_addr_in;
dma_addr_t dma_addr_out;
int sgSize = 0; /* Num SG elements */
int iocnum, flagsLength;
int sz, rc = 0;
int msgContext;
u16 req_idx;
ulong timeout;
dctlprintk(("mptctl_do_mpt_command called.\n"));
bufIn.kptr = bufOut.kptr = NULL;
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
if (!ioc->ioctl) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"No memory available during driver init.\n",
__FILE__, __LINE__);
return -ENOMEM;
} else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Busy with IOC Reset \n", __FILE__, __LINE__);
return -EBUSY;
}
/* Verify that the final request frame will not be too large.
*/
sz = karg.dataSgeOffset * 4;
if (karg.dataInSize > 0)
sz += sizeof(dma_addr_t) + sizeof(u32);
if (karg.dataOutSize > 0)
sz += sizeof(dma_addr_t) + sizeof(u32);
if (sz > ioc->req_sz) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Request frame too large (%d) maximum (%d)\n",
__FILE__, __LINE__, sz, ioc->req_sz);
return -EFAULT;
}
/* Get a free request frame and save the message context.
*/
if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL)
return -EAGAIN;
hdr = (MPIHeader_t *) mf;
msgContext = le32_to_cpu(hdr->MsgContext);
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
/* Copy the request frame
* Reset the saved message context.
* Request frame in user space
*/
if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Unable to read MF from mpt_ioctl_command struct @ %p\n",
__FILE__, __LINE__, mfPtr);
rc = -EFAULT;
goto done_free_mem;
}
hdr->MsgContext = cpu_to_le32(msgContext);
/* Verify that this request is allowed.
*/
switch (hdr->Function) {
case MPI_FUNCTION_IOC_FACTS:
case MPI_FUNCTION_PORT_FACTS:
karg.dataOutSize = karg.dataInSize = 0;
break;
case MPI_FUNCTION_CONFIG:
case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND:
case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND:
case MPI_FUNCTION_FW_UPLOAD:
case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
case MPI_FUNCTION_FW_DOWNLOAD:
case MPI_FUNCTION_FC_PRIMITIVE_SEND:
break;
case MPI_FUNCTION_SCSI_IO_REQUEST:
if (ioc->sh) {
SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
VirtTarget *pTarget = NULL;
MPT_SCSI_HOST *hd = NULL;
int qtag = MPI_SCSIIO_CONTROL_UNTAGGED;
int scsidir = 0;
int target = (int) pScsiReq->TargetID;
int dataSize;
if ((target < 0) || (target >= ioc->sh->max_id)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Target ID out of bounds. \n",
__FILE__, __LINE__);
rc = -ENODEV;
goto done_free_mem;
}
pScsiReq->MsgFlags = mpt_msg_flags();
/* verify that app has not requested
* more sense data than driver
* can provide, if so, reset this parameter
* set the sense buffer pointer low address
* update the control field to specify Q type
*/
if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
else
pScsiReq->SenseBufferLength = karg.maxSenseBytes;
pScsiReq->SenseBufferLowAddr =
cpu_to_le32(ioc->sense_buf_low_dma
+ (req_idx * MPT_SENSE_BUFFER_ALLOC));
if ((hd = (MPT_SCSI_HOST *) ioc->sh->hostdata)) {
if (hd->Targets)
pTarget = hd->Targets[target];
}
if (pTarget &&(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
/* Have the IOCTL driver set the direction based
* on the dataOutSize (ordering issue with Sparc).
*/
if (karg.dataOutSize > 0) {
scsidir = MPI_SCSIIO_CONTROL_WRITE;
dataSize = karg.dataOutSize;
} else {
scsidir = MPI_SCSIIO_CONTROL_READ;
dataSize = karg.dataInSize;
}
pScsiReq->Control = cpu_to_le32(scsidir | qtag);
pScsiReq->DataLength = cpu_to_le32(dataSize);
ioc->ioctl->reset = MPTCTL_RESET_OK;
ioc->ioctl->target = target;
} else {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"SCSI driver is not loaded. \n",
__FILE__, __LINE__);
rc = -EFAULT;
goto done_free_mem;
}
break;
case MPI_FUNCTION_RAID_ACTION:
/* Just add a SGE
*/
break;
case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
if (ioc->sh) {
SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
int scsidir = MPI_SCSIIO_CONTROL_READ;
int dataSize;
pScsiReq->MsgFlags = mpt_msg_flags();
/* verify that app has not requested
* more sense data than driver
* can provide, if so, reset this parameter
* set the sense buffer pointer low address
* update the control field to specify Q type
*/
if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
else
pScsiReq->SenseBufferLength = karg.maxSenseBytes;
pScsiReq->SenseBufferLowAddr =
cpu_to_le32(ioc->sense_buf_low_dma
+ (req_idx * MPT_SENSE_BUFFER_ALLOC));
/* All commands to physical devices are tagged
*/
/* Have the IOCTL driver set the direction based
* on the dataOutSize (ordering issue with Sparc).
*/
if (karg.dataOutSize > 0) {
scsidir = MPI_SCSIIO_CONTROL_WRITE;
dataSize = karg.dataOutSize;
} else {
scsidir = MPI_SCSIIO_CONTROL_READ;
dataSize = karg.dataInSize;
}
pScsiReq->Control = cpu_to_le32(scsidir | qtag);
pScsiReq->DataLength = cpu_to_le32(dataSize);
ioc->ioctl->reset = MPTCTL_RESET_OK;
ioc->ioctl->target = pScsiReq->TargetID;
} else {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"SCSI driver is not loaded. \n",
__FILE__, __LINE__);
rc = -EFAULT;
goto done_free_mem;
}
break;
case MPI_FUNCTION_SCSI_TASK_MGMT:
{
MPT_SCSI_HOST *hd = NULL;
if ((ioc->sh == NULL) || ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"SCSI driver not loaded or SCSI host not found. \n",
__FILE__, __LINE__);
rc = -EFAULT;
goto done_free_mem;
} else if (mptctl_set_tm_flags(hd) != 0) {
rc = -EPERM;
goto done_free_mem;
}
}
break;
case MPI_FUNCTION_IOC_INIT:
{
IOCInit_t *pInit = (IOCInit_t *) mf;
u32 high_addr, sense_high;
/* Verify that all entries in the IOC INIT match
* existing setup (and in LE format).
*/
if (sizeof(dma_addr_t) == sizeof(u64)) {
high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32));
sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
} else {
high_addr = 0;
sense_high= 0;
}
if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) ||
(pInit->MaxBuses != ioc->facts.MaxBuses) ||
(pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) ||
(pInit->HostMfaHighAddr != high_addr) ||
(pInit->SenseBufferHighAddr != sense_high)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n",
__FILE__, __LINE__);
rc = -EFAULT;
goto done_free_mem;
}
}
break;
default:
/*
* MPI_FUNCTION_PORT_ENABLE
* MPI_FUNCTION_TARGET_CMD_BUFFER_POST
* MPI_FUNCTION_TARGET_ASSIST
* MPI_FUNCTION_TARGET_STATUS_SEND
* MPI_FUNCTION_TARGET_MODE_ABORT
* MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET
* MPI_FUNCTION_IO_UNIT_RESET
* MPI_FUNCTION_HANDSHAKE
* MPI_FUNCTION_REPLY_FRAME_REMOVAL
* MPI_FUNCTION_EVENT_NOTIFICATION
* (driver handles event notification)
* MPI_FUNCTION_EVENT_ACK
*/
/* What to do with these??? CHECK ME!!!
MPI_FUNCTION_FC_LINK_SRVC_BUF_POST
MPI_FUNCTION_FC_LINK_SRVC_RSP
MPI_FUNCTION_FC_ABORT
MPI_FUNCTION_LAN_SEND
MPI_FUNCTION_LAN_RECEIVE
MPI_FUNCTION_LAN_RESET
*/
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Illegal request (function 0x%x) \n",
__FILE__, __LINE__, hdr->Function);
rc = -EFAULT;
goto done_free_mem;
}
/* Add the SGL ( at most one data in SGE and one data out SGE )
* In the case of two SGE's - the data out (write) will always
* preceede the data in (read) SGE. psgList is used to free the
* allocated memory.
*/
psge = (char *) (((int *) mf) + karg.dataSgeOffset);
flagsLength = 0;
/* bufIn and bufOut are used for user to kernel space transfers
*/
bufIn.kptr = bufOut.kptr = NULL;
bufIn.len = bufOut.len = 0;
if (karg.dataOutSize > 0)
sgSize ++;
if (karg.dataInSize > 0)
sgSize ++;
if (sgSize > 0) {
/* Set up the dataOut memory allocation */
if (karg.dataOutSize > 0) {
if (karg.dataInSize > 0) {
flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_DIRECTION |
mpt_addr_size() )
<< MPI_SGE_FLAGS_SHIFT;
} else {
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
}
flagsLength |= karg.dataOutSize;
bufOut.len = karg.dataOutSize;
bufOut.kptr = pci_alloc_consistent(
ioc->pcidev, bufOut.len, &dma_addr_out);
if (bufOut.kptr == NULL) {
rc = -ENOMEM;
goto done_free_mem;
} else {
/* Set up this SGE.
* Copy to MF and to sglbuf
*/
mpt_add_sge(psge, flagsLength, dma_addr_out);
psge += (sizeof(u32) + sizeof(dma_addr_t));
/* Copy user data to kernel space.
*/
if (copy_from_user(bufOut.kptr,
karg.dataOutBufPtr,
bufOut.len)) {
printk(KERN_ERR
"%s@%d::mptctl_do_mpt_command - Unable "
"to read user data "
"struct @ %p\n",
__FILE__, __LINE__,karg.dataOutBufPtr);
rc = -EFAULT;
goto done_free_mem;
}
}
}
if (karg.dataInSize > 0) {
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
flagsLength |= karg.dataInSize;
bufIn.len = karg.dataInSize;
bufIn.kptr = pci_alloc_consistent(ioc->pcidev,
bufIn.len, &dma_addr_in);
if (bufIn.kptr == NULL) {
rc = -ENOMEM;
goto done_free_mem;
} else {
/* Set up this SGE
* Copy to MF and to sglbuf
*/
mpt_add_sge(psge, flagsLength, dma_addr_in);
}
}
} else {
/* Add a NULL SGE
*/
mpt_add_sge(psge, flagsLength, (dma_addr_t) -1);
}
ioc->ioctl->wait_done = 0;
if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
DBG_DUMP_TM_REQUEST_FRAME((u32 *)mf);
if (mpt_send_handshake_request(mptctl_id, ioc,
sizeof(SCSITaskMgmt_t), (u32*)mf,
CAN_SLEEP) != 0) {
dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!"
" (ioc %p, mf %p) \n", ioc->name,
ioc, mf));
mptctl_free_tm_flags(ioc);
rc = -ENODATA;
goto done_free_mem;
}
} else
mpt_put_msg_frame(mptctl_id, ioc, mf);
/* Now wait for the command to complete */
timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
timeout = wait_event_interruptible_timeout(mptctl_wait,
ioc->ioctl->wait_done == 1,
HZ*timeout);
if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) {
/* Now we need to reset the board */
if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT)
mptctl_free_tm_flags(ioc);
mptctl_timeout_expired(ioc->ioctl);
rc = -ENODATA;
goto done_free_mem;
}
mf = NULL;
/* If a valid reply frame, copy to the user.
* Offset 2: reply length in U32's
*/
if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) {
if (karg.maxReplyBytes < ioc->reply_sz) {
sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]);
} else {
sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]);
}
if (sz > 0) {
if (copy_to_user(karg.replyFrameBufPtr,
&ioc->ioctl->ReplyFrame, sz)){
printk(KERN_ERR
"%s@%d::mptctl_do_mpt_command - "
"Unable to write out reply frame %p\n",
__FILE__, __LINE__, karg.replyFrameBufPtr);
rc = -ENODATA;
goto done_free_mem;
}
}
}
/* If valid sense data, copy to user.
*/
if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) {
sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
if (sz > 0) {
if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Unable to write sense data to user %p\n",
__FILE__, __LINE__,
karg.senseDataPtr);
rc = -ENODATA;
goto done_free_mem;
}
}
}
/* If the overall status is _GOOD and data in, copy data
* to user.
*/
if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) &&
(karg.dataInSize > 0) && (bufIn.kptr)) {
if (copy_to_user(karg.dataInBufPtr,
bufIn.kptr, karg.dataInSize)) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Unable to write data to user %p\n",
__FILE__, __LINE__,
karg.dataInBufPtr);
rc = -ENODATA;
}
}
done_free_mem:
ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD |
MPT_IOCTL_STATUS_SENSE_VALID |
MPT_IOCTL_STATUS_RF_VALID );
/* Free the allocated memory.
*/
if (bufOut.kptr != NULL) {
pci_free_consistent(ioc->pcidev,
bufOut.len, (void *) bufOut.kptr, dma_addr_out);
}
if (bufIn.kptr != NULL) {
pci_free_consistent(ioc->pcidev,
bufIn.len, (void *) bufIn.kptr, dma_addr_in);
}
/* mf is null if command issued successfully
* otherwise, failure occured after mf acquired.
*/
if (mf)
mpt_free_msg_frame(ioc, mf);
return rc;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Prototype Routine for the HP HOST INFO command.
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -EBUSY if previous command timout and IOC reset is not complete.
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
*/
static int
mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
{
hp_host_info_t __user *uarg = (void __user *) arg;
MPT_ADAPTER *ioc;
struct pci_dev *pdev;
char *pbuf;
dma_addr_t buf_dma;
hp_host_info_t karg;
CONFIGPARMS cfg;
ConfigPageHeader_t hdr;
int iocnum;
int rc, cim_rev;
dctlprintk((": mptctl_hp_hostinfo called.\n"));
/* Reset long to int. Should affect IA64 and SPARC only
*/
if (data_size == sizeof(hp_host_info_t))
cim_rev = 1;
else if (data_size == sizeof(hp_host_info_rev0_t))
cim_rev = 0; /* obsolete */
else
return -EFAULT;
if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) {
printk(KERN_ERR "%s@%d::mptctl_hp_host_info - "
"Unable to read in hp_host_info struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
/* Fill in the data and return the structure to the calling
* program
*/
pdev = (struct pci_dev *) ioc->pcidev;
karg.vendor = pdev->vendor;
karg.device = pdev->device;
karg.subsystem_id = pdev->subsystem_device;
karg.subsystem_vendor = pdev->subsystem_vendor;
karg.devfn = pdev->devfn;
karg.bus = pdev->bus->number;
/* Save the SCSI host no. if
* SCSI driver loaded
*/
if (ioc->sh != NULL)
karg.host_no = ioc->sh->host_no;
else
karg.host_no = -1;
/* Reformat the fw_version into a string
*/
karg.fw_version[0] = ioc->facts.FWVersion.Struct.Major >= 10 ?
((ioc->facts.FWVersion.Struct.Major / 10) + '0') : '0';
karg.fw_version[1] = (ioc->facts.FWVersion.Struct.Major % 10 ) + '0';
karg.fw_version[2] = '.';
karg.fw_version[3] = ioc->facts.FWVersion.Struct.Minor >= 10 ?
((ioc->facts.FWVersion.Struct.Minor / 10) + '0') : '0';
karg.fw_version[4] = (ioc->facts.FWVersion.Struct.Minor % 10 ) + '0';
karg.fw_version[5] = '.';
karg.fw_version[6] = ioc->facts.FWVersion.Struct.Unit >= 10 ?
((ioc->facts.FWVersion.Struct.Unit / 10) + '0') : '0';
karg.fw_version[7] = (ioc->facts.FWVersion.Struct.Unit % 10 ) + '0';
karg.fw_version[8] = '.';
karg.fw_version[9] = ioc->facts.FWVersion.Struct.Dev >= 10 ?
((ioc->facts.FWVersion.Struct.Dev / 10) + '0') : '0';
karg.fw_version[10] = (ioc->facts.FWVersion.Struct.Dev % 10 ) + '0';
karg.fw_version[11] = '\0';
/* Issue a config request to get the device serial number
*/
hdr.PageVersion = 0;
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0; /* read */
cfg.timeout = 10;
strncpy(karg.serial_number, " ", 24);
if (mpt_config(ioc, &cfg) == 0) {
if (cfg.cfghdr.hdr->PageLength > 0) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
if (pbuf) {
cfg.physAddr = buf_dma;
if (mpt_config(ioc, &cfg) == 0) {
ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf;
if (strlen(pdata->BoardTracerNumber) > 1) {
strncpy(karg.serial_number, pdata->BoardTracerNumber, 24);
karg.serial_number[24-1]='\0';
}
}
pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
pbuf = NULL;
}
}
}
rc = mpt_GetIocState(ioc, 1);
switch (rc) {
case MPI_IOC_STATE_OPERATIONAL:
karg.ioc_status = HP_STATUS_OK;
break;
case MPI_IOC_STATE_FAULT:
karg.ioc_status = HP_STATUS_FAILED;
break;
case MPI_IOC_STATE_RESET:
case MPI_IOC_STATE_READY:
default:
karg.ioc_status = HP_STATUS_OTHER;
break;
}
karg.base_io_addr = pci_resource_start(pdev, 0);
if (ioc->bus_type == FC)
karg.bus_phys_width = HP_BUS_WIDTH_UNK;
else
karg.bus_phys_width = HP_BUS_WIDTH_16;
karg.hard_resets = 0;
karg.soft_resets = 0;
karg.timeouts = 0;
if (ioc->sh != NULL) {
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
if (hd && (cim_rev == 1)) {
karg.hard_resets = hd->hard_resets;
karg.soft_resets = hd->soft_resets;
karg.timeouts = hd->timeouts;
}
}
cfg.pageAddr = 0;
cfg.action = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
cfg.dir = MPI_TB_ISTWI_FLAGS_READ;
cfg.timeout = 10;
pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
if (pbuf) {
cfg.physAddr = buf_dma;
if ((mpt_toolbox(ioc, &cfg)) == 0) {
karg.rsvd = *(u32 *)pbuf;
}
pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
pbuf = NULL;
}
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {
printk(KERN_ERR "%s@%d::mptctl_hpgethostinfo - "
"Unable to write out hp_host_info @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* Prototype Routine for the HP TARGET INFO command.
*
* Outputs: None.
* Return: 0 if successful
* -EFAULT if data unavailable
* -EBUSY if previous command timout and IOC reset is not complete.
* -ENODEV if no such device/adapter
* -ETIME if timer expires
* -ENOMEM if memory allocation error
*/
static int
mptctl_hp_targetinfo(unsigned long arg)
{
hp_target_info_t __user *uarg = (void __user *) arg;
SCSIDevicePage0_t *pg0_alloc;
SCSIDevicePage3_t *pg3_alloc;
MPT_ADAPTER *ioc;
MPT_SCSI_HOST *hd = NULL;
hp_target_info_t karg;
int iocnum;
int data_sz;
dma_addr_t page_dma;
CONFIGPARMS cfg;
ConfigPageHeader_t hdr;
int tmp, np, rc = 0;
dctlprintk((": mptctl_hp_targetinfo called.\n"));
if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) {
printk(KERN_ERR "%s@%d::mptctl_hp_targetinfo - "
"Unable to read in hp_host_targetinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
(ioc == NULL)) {
dctlprintk((KERN_ERR "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n",
__FILE__, __LINE__, iocnum));
return -ENODEV;
}
/* There is nothing to do for FCP parts.
*/
if (ioc->bus_type == FC)
return 0;
if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL))
return 0;
if (ioc->sh->host_no != karg.hdr.host)
return -ENODEV;
/* Get the data transfer speeds
*/
data_sz = ioc->spi_data.sdp0length * 4;
pg0_alloc = (SCSIDevicePage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
if (pg0_alloc) {
hdr.PageVersion = ioc->spi_data.sdp0version;
hdr.PageLength = data_sz;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.dir = 0;
cfg.timeout = 0;
cfg.physAddr = page_dma;
cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
if ((rc = mpt_config(ioc, &cfg)) == 0) {
np = le32_to_cpu(pg0_alloc->NegotiatedParameters);
karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ?
HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8;
if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) {
tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
if (tmp < 0x09)
karg.negotiated_speed = HP_DEV_SPEED_ULTRA320;
else if (tmp <= 0x09)
karg.negotiated_speed = HP_DEV_SPEED_ULTRA160;
else if (tmp <= 0x0A)
karg.negotiated_speed = HP_DEV_SPEED_ULTRA2;
else if (tmp <= 0x0C)
karg.negotiated_speed = HP_DEV_SPEED_ULTRA;
else if (tmp <= 0x25)
karg.negotiated_speed = HP_DEV_SPEED_FAST;
else
karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
} else
karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
}
pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma);
}
/* Set defaults
*/
karg.message_rejects = -1;
karg.phase_errors = -1;
karg.parity_errors = -1;
karg.select_timeouts = -1;
/* Get the target error parameters
*/
hdr.PageVersion = 0;
hdr.PageLength = 0;
hdr.PageNumber = 3;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
cfg.timeout = 0;
cfg.physAddr = -1;
if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent(
ioc->pcidev, data_sz, &page_dma);
if (pg3_alloc) {
cfg.physAddr = page_dma;
cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
if ((rc = mpt_config(ioc, &cfg)) == 0) {
karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount);
karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount);
karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount);
}
pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma);
}
}
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
if (hd != NULL)
karg.select_timeouts = hd->sel_timeout[karg.hdr.id];
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) {
printk(KERN_ERR "%s@%d::mptctl_hp_target_info - "
"Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
__FILE__, __LINE__, uarg);
return -EFAULT;
}
return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static struct file_operations mptctl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.unlocked_ioctl = mptctl_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_mpctl_ioctl,
#endif
};
static struct miscdevice mptctl_miscdev = {
MPT_MINOR,
MYNAM,
&mptctl_fops
};
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#ifdef CONFIG_COMPAT
static int
compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct mpt_fw_xfer32 kfw32;
struct mpt_fw_xfer kfw;
MPT_ADAPTER *iocp = NULL;
int iocnum, iocnumX;
int nonblock = (filp->f_flags & O_NONBLOCK);
int ret;
dctlprintk((KERN_INFO MYNAM "::compat_mptfwxfer_ioctl() called\n"));
if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32)))
return -EFAULT;
/* Verify intended MPT adapter */
iocnumX = kfw32.iocnum & 0xFF;
if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
(iocp == NULL)) {
dctlprintk((KERN_ERR MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n",
__LINE__, iocnumX));
return -ENODEV;
}
if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
return ret;
kfw.iocnum = iocnum;
kfw.fwlen = kfw32.fwlen;
kfw.bufp = compat_ptr(kfw32.bufp);
ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
mutex_unlock(&iocp->ioctl->ioctl_mutex);
return ret;
}
static int
compat_mpt_command(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct mpt_ioctl_command32 karg32;
struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg;
struct mpt_ioctl_command karg;
MPT_ADAPTER *iocp = NULL;
int iocnum, iocnumX;
int nonblock = (filp->f_flags & O_NONBLOCK);
int ret;
dctlprintk((KERN_INFO MYNAM "::compat_mpt_command() called\n"));
if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32)))
return -EFAULT;
/* Verify intended MPT adapter */
iocnumX = karg32.hdr.iocnum & 0xFF;
if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
(iocp == NULL)) {
dctlprintk((KERN_ERR MYNAM "::compat_mpt_command @%d - ioc%d not found!\n",
__LINE__, iocnumX));
return -ENODEV;
}
if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
return ret;
/* Copy data to karg */
karg.hdr.iocnum = karg32.hdr.iocnum;
karg.hdr.port = karg32.hdr.port;
karg.timeout = karg32.timeout;
karg.maxReplyBytes = karg32.maxReplyBytes;
karg.dataInSize = karg32.dataInSize;
karg.dataOutSize = karg32.dataOutSize;
karg.maxSenseBytes = karg32.maxSenseBytes;
karg.dataSgeOffset = karg32.dataSgeOffset;
karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr;
karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr;
karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr;
karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr;
/* Pass new structure to do_mpt_command
*/
ret = mptctl_do_mpt_command (karg, &uarg->MF);
mutex_unlock(&iocp->ioctl->ioctl_mutex);
return ret;
}
static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
switch (cmd) {
case MPTIOCINFO:
case MPTIOCINFO1:
case MPTIOCINFO2:
case MPTTARGETINFO:
case MPTEVENTQUERY:
case MPTEVENTENABLE:
case MPTEVENTREPORT:
case MPTHARDRESET:
case HP_GETHOSTINFO:
case HP_GETTARGETINFO:
case MPTTEST:
ret = __mptctl_ioctl(f, cmd, arg);
break;
case MPTCOMMAND32:
ret = compat_mpt_command(f, cmd, arg);
break;
case MPTFWDOWNLOAD32:
ret = compat_mptfwxfer_ioctl(f, cmd, arg);
break;
default:
ret = -ENOIOCTLCMD;
break;
}
unlock_kernel();
return ret;
}
#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptctl_probe - Installs ioctl devices per bus.
* @pdev: Pointer to pci_dev structure
*
* Returns 0 for success, non-zero for failure.
*
*/
static int
mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int err;
int sz;
u8 *mem;
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
/*
* Allocate and inite a MPT_IOCTL structure
*/
sz = sizeof (MPT_IOCTL);
mem = kmalloc(sz, GFP_KERNEL);
if (mem == NULL) {
err = -ENOMEM;
goto out_fail;
}
memset(mem, 0, sz);
ioc->ioctl = (MPT_IOCTL *) mem;
ioc->ioctl->ioc = ioc;
mutex_init(&ioc->ioctl->ioctl_mutex);
return 0;
out_fail:
mptctl_remove(pdev);
return err;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptctl_remove - Removed ioctl devices
* @pdev: Pointer to pci_dev structure
*
*
*/
static void
mptctl_remove(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
kfree ( ioc->ioctl );
}
static struct mpt_pci_driver mptctl_driver = {
.probe = mptctl_probe,
.remove = mptctl_remove,
};
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static int __init mptctl_init(void)
{
int err;
int where = 1;
show_mptmod_ver(my_NAME, my_VERSION);
if(mpt_device_driver_register(&mptctl_driver,
MPTCTL_DRIVER) != 0 ) {
dprintk((KERN_INFO MYNAM
": failed to register dd callbacks\n"));
}
/* Register this device */
err = misc_register(&mptctl_miscdev);
if (err < 0) {
printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR);
goto out_fail;
}
printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n");
printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n",
mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
/*
* Install our handler
*/
++where;
if ((mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER)) < 0) {
printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
misc_deregister(&mptctl_miscdev);
err = -EBUSY;
goto out_fail;
}
if (mpt_reset_register(mptctl_id, mptctl_ioc_reset) == 0) {
dprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n"));
} else {
/* FIXME! */
}
return 0;
out_fail:
mpt_device_driver_deregister(MPTCTL_DRIVER);
return err;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void mptctl_exit(void)
{
misc_deregister(&mptctl_miscdev);
printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
/* De-register reset handler from base module */
mpt_reset_deregister(mptctl_id);
dprintk((KERN_INFO MYNAM ": Deregistered for IOC reset notifications\n"));
/* De-register callback handler from base module */
mpt_deregister(mptctl_id);
printk(KERN_INFO MYNAM ": Deregistered from Fusion MPT base driver\n");
mpt_device_driver_deregister(MPTCTL_DRIVER);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
module_init(mptctl_init);
module_exit(mptctl_exit);