arm/dt: msm8626: Add SMP2P devices
Adds new interprocessor, point-to-point signaling devices for modem,
WCNSS, and ADSP.
Change-Id: I79141a8255e361a904826d0109b614ba39487a36
Signed-off-by: Eric Holmberg <eholmber@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8226-smp2p.dtsi b/arch/arm/boot/dts/msm8226-smp2p.dtsi
new file mode 100644
index 0000000..60f63a8
--- /dev/null
+++ b/arch/arm/boot/dts/msm8226-smp2p.dtsi
@@ -0,0 +1,194 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/ {
+ qcom,smp2p-modem {
+ compatible = "qcom,smp2p";
+ reg = <0xfa006000 0x1000>, <0x8 0x0>;
+ reg-names = "irq-reg-base", "irq-reg-offset";
+ qcom,remote-pid = <1>;
+ qcom,irq-bitmask = <0x4000>;
+ interrupts = <0 27 1>;
+ };
+
+ qcom,smp2p-adsp {
+ compatible = "qcom,smp2p";
+ reg = <0xfa006000 0x1000>, <0x8 0x0>;
+ reg-names = "irq-reg-base", "irq-reg-offset";
+ qcom,remote-pid = <2>;
+ qcom,irq-bitmask = <0x400>;
+ interrupts = <0 158 1>;
+ };
+
+ qcom,smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ reg = <0xfa006000 0x1000>, <0x8 0x0>;
+ reg-names = "irq-reg-base", "irq-reg-offset";
+ qcom,remote-pid = <4>;
+ qcom,irq-bitmask = <0x40000>;
+ interrupts = <0 143 1>;
+ };
+
+ /* SMP2P Test Driver for inbound entries */
+ smp2pgpio_smp2p_7_in: qcom,smp2pgpio-smp2p-7-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <7>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_7_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_7_in";
+ gpios = <&smp2pgpio_smp2p_7_in 0 0>;
+ };
+
+ /* SMP2P Test Driver for outbound entries */
+ smp2pgpio_smp2p_7_out: qcom,smp2pgpio-smp2p-7-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_7_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_7_out";
+ gpios = <&smp2pgpio_smp2p_7_out 0 0>;
+ };
+
+ /* SMP2P Test Driver for modem inbound */
+ smp2pgpio_smp2p_1_in: qcom,smp2pgpio-smp2p-1-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <1>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_1_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_1_in";
+ gpios = <&smp2pgpio_smp2p_1_in 0 0>;
+ };
+
+ /* SMP2P Test Driver for modem output */
+ smp2pgpio_smp2p_1_out: qcom,smp2pgpio-smp2p-1-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_1_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_1_out";
+ gpios = <&smp2pgpio_smp2p_1_out 0 0>;
+ };
+
+ /* SMP2P SSR Driver for inbound entry from modem. */
+ smp2pgpio_ssr_smp2p_1_in: qcom,smp2pgpio-ssr-smp2p-1-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "slave-kernel";
+ qcom,remote-pid = <1>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* SMP2P SSR Driver for outbound entry to modem */
+ smp2pgpio_ssr_smp2p_1_out: qcom,smp2pgpio-ssr-smp2p-1-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "master-kernel";
+ qcom,remote-pid = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* SMP2P Test Driver for adsp inbound */
+ smp2pgpio_smp2p_2_in: qcom,smp2pgpio-smp2p-2-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <2>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_2_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_2_in";
+ gpios = <&smp2pgpio_smp2p_2_in 0 0>;
+ };
+
+ /* SMP2P Test Driver for adsp output */
+ smp2pgpio_smp2p_2_out: qcom,smp2pgpio-smp2p-2-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_2_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_2_out";
+ gpios = <&smp2pgpio_smp2p_2_out 0 0>;
+ };
+
+ /* SMP2P Test Driver for wcnss inbound */
+ smp2pgpio_smp2p_4_in: qcom,smp2pgpio-smp2p-4-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <4>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_4_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_4_in";
+ gpios = <&smp2pgpio_smp2p_4_in 0 0>;
+ };
+
+ /* SMP2P Test Driver for wcnss output */
+ smp2pgpio_smp2p_4_out: qcom,smp2pgpio-smp2p-4-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_4_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_4_out";
+ gpios = <&smp2pgpio_smp2p_4_out 0 0>;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226.dtsi b/arch/arm/boot/dts/msm8226.dtsi
index cbcbe08..c6445d2 100644
--- a/arch/arm/boot/dts/msm8226.dtsi
+++ b/arch/arm/boot/dts/msm8226.dtsi
@@ -15,6 +15,7 @@
/include/ "msm-gdsc.dtsi"
/include/ "msm8226-iommu.dtsi"
/include/ "msm8226-pm.dtsi"
+/include/ "msm8226-smp2p.dtsi"
/ {
model = "Qualcomm MSM 8226";