Staging: rt3070: remove dead UCOS code
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/rt3070/common/ba_action.c b/drivers/staging/rt3070/common/ba_action.c
index 43b5ac1..2ad68cb 100644
--- a/drivers/staging/rt3070/common/ba_action.c
+++ b/drivers/staging/rt3070/common/ba_action.c
@@ -1562,9 +1562,6 @@
#ifdef LINUX
NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
#endif
-#ifdef UCOS
- NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
}
#endif // CONFIG_STA_SUPPORT //
}
diff --git a/drivers/staging/rt3070/common/cmm_info.c b/drivers/staging/rt3070/common/cmm_info.c
index 767c9db..c514c90 100644
--- a/drivers/staging/rt3070/common/cmm_info.c
+++ b/drivers/staging/rt3070/common/cmm_info.c
@@ -1833,7 +1833,6 @@
return "UNKNOW";
}
-#if 1 //#ifndef UCOS
/*
==========================================================================
Description:
@@ -2048,7 +2047,6 @@
kfree(msg);
}
-#endif // UCOS //
#ifdef DOT11_N_SUPPORT
INT Set_BASetup_Proc(
diff --git a/drivers/staging/rt3070/rt_ate.c b/drivers/staging/rt3070/rt_ate.c
index 245792f..b636015c 100644
--- a/drivers/staging/rt3070/rt_ate.c
+++ b/drivers/staging/rt3070/rt_ate.c
@@ -27,10 +27,6 @@
#include "rt_config.h"
-#ifdef UCOS
-INT IoctlResponse(PUCHAR payload, PUCHAR msg, INT len);
-#endif // UCOS //
-
#define ATE_BBP_REG_NUM 168
UCHAR restore_BBP[ATE_BBP_REG_NUM]={0};
@@ -51,11 +47,6 @@
//2008/07/10:KH adds to support 3070 ATE-->
#endif // RT30xx //
-#ifdef UCOS
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-#endif // UCOS //
-
static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
@@ -2444,7 +2435,6 @@
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
-#ifndef UCOS
INT Set_ATE_Load_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
@@ -2539,44 +2529,6 @@
return ret;
}
-#else
-INT Set_ATE_Load_E2P_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- USHORT WriteEEPROM[(EEPROM_SIZE/2)];
- struct iwreq *wrq = (struct iwreq *)arg;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length));
-
- if (wrq->u.data.length != EEPROM_SIZE)
- {
- ate_print("%s: error length (=%d) from host\n",
- __func__, wrq->u.data.length);
- return FALSE;
- }
- else/* (wrq->u.data.length == EEPROM_SIZE) */
- {
- /* zero the e2p buffer */
- NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
- /* fill the local buffer */
- NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
- do
- {
- /* write the content of .bin file to EEPROM */
- rt_ee_write_all(pAd, WriteEEPROM);
-
- } while(FALSE);
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__));
-
- return TRUE;
-
-}
-#endif // !UCOS //
INT Set_ATE_Read_E2P_Proc(
IN PRTMP_ADAPTER pAd,
@@ -4300,20 +4252,6 @@
static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-#ifdef UCOS
-int ate_copy_to_user(
- IN PUCHAR payload,
- IN PUCHAR msg,
- IN INT len)
-{
- memmove(payload, msg, len);
- return 0;
-}
-
-#undef copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
#define LEN_OF_ARG 16
VOID RtmpDoAte(
@@ -4379,9 +4317,7 @@
// We will get this command either QA is closed or ated is killed by user.
case RACFG_CMD_ATE_STOP:
{
-#ifndef UCOS
INT32 ret;
-#endif // !UCOS //
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
@@ -4418,37 +4354,13 @@
// kill ATE daemon when leaving ATE mode.
// We must kill ATE daemon first before setting ATESTOP,
// or Microsoft will report sth. wrong.
-#ifndef UCOS
ret = kill_proc(pAdapter->ate.AtePid, SIGTERM, 1);
if (ret)
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
}
-#endif // !UCOS //
}
-#ifdef UCOS
- // Roger add to avoid error message after close QA
- if (pAdapter->CSRBaseAddress == RT2860_CSR_ADDR)
- {
-
- // prepare feedback as soon as we can to avoid QA timeout.
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_AP_START\n"));
- Status = -EFAULT;
- }
- }
-#endif // UCOS //
-
// AP might have in ATE_STOP mode due to cmd from QA.
if (ATE_ON(pAdapter))
{
diff --git a/drivers/staging/rt3070/rt_ate.h b/drivers/staging/rt3070/rt_ate.h
index 85cf7c1..011fed7 100644
--- a/drivers/staging/rt3070/rt_ate.h
+++ b/drivers/staging/rt3070/rt_ate.h
@@ -28,7 +28,6 @@
#ifndef __ATE_H__
#define __ATE_H__
-#ifndef UCOS
#define ate_print printk
#define ATEDBGPRINT DBGPRINT
@@ -38,33 +37,6 @@
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2870STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
#endif // RT2870 //
-#else // !UCOS //
-#define fATE_LOAD_EEPROM 0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...) \
-do{ int (*org_remote_display)(char *) = NULL; \
- org_remote_display = remote_display;\
- /* Save original "remote_display" */\
- remote_display = (int (*)(char *))ConsoleResponse; \
- printk(fmt, ## args); \
- /* Restore the remote_display function pointer */ \
- remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt) \
-{ \
- if ((Level) <= RTDebugLevel) \
- { \
- ate_print Fmt; \
- } \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
#define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP)
diff --git a/drivers/staging/rt3070/rt_config.h b/drivers/staging/rt3070/rt_config.h
index 2437a6a..498b2ec 100644
--- a/drivers/staging/rt3070/rt_config.h
+++ b/drivers/staging/rt3070/rt_config.h
@@ -41,12 +41,6 @@
#define __RT_CONFIG_H__
#include "rtmp_type.h"
-#ifdef UCOS
-#include "includes.h"
-#include <stdio.h>
-#include "rt_ucos.h"
-#endif
-
#ifdef LINUX
#include "rt_linux.h"
#endif