[TG3]: Fix suspend/resume problem.
Joachim Deguara <joachim.deguara@amd.com> reported that tg3 devices
would not resume properly if the device was shutdown before the system
was suspended. In such scenario where the netif_running state is 0,
tg3_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.
We fix this by always saving and restoring the PCI state in
tg3_suspend() and tg3_resume() regardless of netif_running() state.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dc41c05..5874042 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.79"
-#define DRV_MODULE_RELDATE "July 18, 2007"
+#define DRV_MODULE_VERSION "3.80"
+#define DRV_MODULE_RELDATE "August 2, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -12111,6 +12111,12 @@
struct tg3 *tp = netdev_priv(dev);
int err;
+ /* PCI register 4 needs to be saved whether netif_running() or not.
+ * MSI address and data need to be saved if using MSI and
+ * netif_running().
+ */
+ pci_save_state(pdev);
+
if (!netif_running(dev))
return 0;
@@ -12130,9 +12136,6 @@
tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
tg3_full_unlock(tp);
- /* Save MSI address and data for resume. */
- pci_save_state(pdev);
-
err = tg3_set_power_state(tp, pci_choose_state(pdev, state));
if (err) {
tg3_full_lock(tp, 0);
@@ -12160,11 +12163,11 @@
struct tg3 *tp = netdev_priv(dev);
int err;
+ pci_restore_state(tp->pdev);
+
if (!netif_running(dev))
return 0;
- pci_restore_state(tp->pdev);
-
err = tg3_set_power_state(tp, PCI_D0);
if (err)
return err;