Merge branch 'linux-2.6.31.y' of git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index b3cadb6..bd193ae 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -292,8 +292,6 @@
d_fnstart(3, dev, "(i2400m %p ss %p [%u])\n", i2400m, ss, i2400m_state);
- if (unlikely(i2400m->ready == 0)) /* act if up */
- goto out;
if (i2400m->state != i2400m_state) {
i2400m->state = i2400m_state;
wake_up_all(&i2400m->state_wq);
@@ -341,7 +339,6 @@
i2400m->bus_reset(i2400m, I2400M_RT_WARM);
break;
};
-out:
d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
i2400m, ss, i2400m_state);
}
@@ -372,8 +369,6 @@
d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
- if (unlikely(i2400m->ready == 0)) /* act if up */
- goto out;
switch (status) {
case I2400M_MEDIA_STATUS_LINK_UP:
netif_carrier_on(net_dev);
@@ -393,14 +388,59 @@
dev_err(dev, "HW BUG? unknown media status %u\n",
status);
};
-out:
d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
i2400m, ms, status);
}
/*
- * Parse a 'state report' and extract carrier on/off information
+ * Process a TLV from a 'state report'
+ *
+ * @i2400m: device descriptor
+ * @tlv: pointer to the TLV header; it has been already validated for
+ * consistent size.
+ * @tag: for error messages
+ *
+ * Act on the TLVs from a 'state report'.
+ */
+static
+void i2400m_report_state_parse_tlv(struct i2400m *i2400m,
+ const struct i2400m_tlv_hdr *tlv,
+ const char *tag)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ const struct i2400m_tlv_media_status *ms;
+ const struct i2400m_tlv_system_state *ss;
+ const struct i2400m_tlv_rf_switches_status *rfss;
+
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE, sizeof(*ss))) {
+ ss = container_of(tlv, typeof(*ss), hdr);
+ d_printf(2, dev, "%s: system state TLV "
+ "found (0x%04x), state 0x%08x\n",
+ tag, I2400M_TLV_SYSTEM_STATE,
+ le32_to_cpu(ss->state));
+ i2400m_report_tlv_system_state(i2400m, ss);
+ }
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS, sizeof(*rfss))) {
+ rfss = container_of(tlv, typeof(*rfss), hdr);
+ d_printf(2, dev, "%s: RF status TLV "
+ "found (0x%04x), sw 0x%02x hw 0x%02x\n",
+ tag, I2400M_TLV_RF_STATUS,
+ le32_to_cpu(rfss->sw_rf_switch),
+ le32_to_cpu(rfss->hw_rf_switch));
+ i2400m_report_tlv_rf_switches_status(i2400m, rfss);
+ }
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS, sizeof(*ms))) {
+ ms = container_of(tlv, typeof(*ms), hdr);
+ d_printf(2, dev, "%s: Media Status TLV: %u\n",
+ tag, le32_to_cpu(ms->media_status));
+ i2400m_report_tlv_media_status(i2400m, ms);
+ }
+}
+
+
+/*
+ * Parse a 'state report' and extract information
*
* @i2400m: device descriptor
* @l3l4_hdr: pointer to message; it has been already validated for
@@ -409,13 +449,7 @@
* declaration is assumed to be congruent with @size (as in
* sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
*
- * Extract from the report state the system state TLV and infer from
- * there if we have a carrier or not. Update our local state and tell
- * netdev.
- *
- * When setting the carrier, it's fine to set OFF twice (for example),
- * as netif_carrier_off() will not generate two OFF events (just on
- * the transitions).
+ * Walk over the TLVs in a report state and act on them.
*/
static
void i2400m_report_state_hook(struct i2400m *i2400m,
@@ -424,9 +458,6 @@
{
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_hdr *tlv;
- const struct i2400m_tlv_system_state *ss;
- const struct i2400m_tlv_rf_switches_status *rfss;
- const struct i2400m_tlv_media_status *ms;
size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
@@ -434,34 +465,8 @@
tlv = NULL;
while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
- tlv_size, tlv))) {
- if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE,
- sizeof(*ss))) {
- ss = container_of(tlv, typeof(*ss), hdr);
- d_printf(2, dev, "%s: system state TLV "
- "found (0x%04x), state 0x%08x\n",
- tag, I2400M_TLV_SYSTEM_STATE,
- le32_to_cpu(ss->state));
- i2400m_report_tlv_system_state(i2400m, ss);
- }
- if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS,
- sizeof(*rfss))) {
- rfss = container_of(tlv, typeof(*rfss), hdr);
- d_printf(2, dev, "%s: RF status TLV "
- "found (0x%04x), sw 0x%02x hw 0x%02x\n",
- tag, I2400M_TLV_RF_STATUS,
- le32_to_cpu(rfss->sw_rf_switch),
- le32_to_cpu(rfss->hw_rf_switch));
- i2400m_report_tlv_rf_switches_status(i2400m, rfss);
- }
- if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS,
- sizeof(*ms))) {
- ms = container_of(tlv, typeof(*ms), hdr);
- d_printf(2, dev, "%s: Media Status TLV: %u\n",
- tag, le32_to_cpu(ms->media_status));
- i2400m_report_tlv_media_status(i2400m, ms);
- }
- }
+ tlv_size, tlv)))
+ i2400m_report_state_parse_tlv(i2400m, tlv, tag);
d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
i2400m, l3l4_hdr, size, tag);
}
@@ -721,6 +726,8 @@
ack_timeout = HZ;
};
+ if (unlikely(i2400m->trace_msg_from_user))
+ wimax_msg(&i2400m->wimax_dev, "echo", buf, buf_len, GFP_KERNEL);
/* The RX path in rx.c will put any response for this message
* in i2400m->ack_skb and wake us up. If we cancel the wait,
* we need to change the value of i2400m->ack_skb to something
@@ -755,6 +762,9 @@
ack_l3l4_hdr = wimax_msg_data_len(ack_skb, &ack_len);
/* Check the ack and deliver it if it is ok */
+ if (unlikely(i2400m->trace_msg_from_user))
+ wimax_msg(&i2400m->wimax_dev, "echo",
+ ack_l3l4_hdr, ack_len, GFP_KERNEL);
result = i2400m_msg_size_check(i2400m, ack_l3l4_hdr, ack_len);
if (result < 0) {
dev_err(dev, "HW BUG? reply to message 0x%04x: %d\n",
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 07a54ba..ef16c57 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -62,6 +62,7 @@
* unregister_netdev()
*/
#include "i2400m.h"
+#include <linux/etherdevice.h>
#include <linux/wimax/i2400m.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -234,9 +235,6 @@
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb))
goto error_msg_to_dev;
- if (unlikely(i2400m->trace_msg_from_user))
- wimax_msg(&i2400m->wimax_dev, "trace",
- msg_buf, msg_len, GFP_KERNEL);
result = wimax_msg_send(&i2400m->wimax_dev, ack_skb);
error_msg_to_dev:
d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu "
@@ -650,6 +648,7 @@
result = i2400m_read_mac_addr(i2400m);
if (result < 0)
goto error_read_mac_addr;
+ random_ether_addr(i2400m->src_mac_addr);
result = register_netdev(net_dev); /* Okey dokey, bring it up */
if (result < 0) {
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 3ae2df3..434ba31 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -323,6 +323,10 @@
* delivered. Then the driver can release them to the host. See
* drivers/net/i2400m/rx.c for details.
*
+ * @src_mac_addr: MAC address used to make ethernet packets be coming
+ * from. This is generated at i2400m_setup() time and used during
+ * the life cycle of the instance. See i2400m_fake_eth_header().
+ *
* @init_mutex: Mutex used for serializing the device bringup
* sequence; this way if the device reboots in the middle, we
* don't try to do a bringup again while we are tearing down the
@@ -421,6 +425,7 @@
unsigned rx_pl_num, rx_pl_max, rx_pl_min,
rx_num, rx_size_acc, rx_size_min, rx_size_max;
struct i2400m_roq *rx_roq; /* not under rx_lock! */
+ u8 src_mac_addr[ETH_HLEN];
struct mutex msg_mutex; /* serialize command execution */
struct completion msg_completion;
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 6b1fe7a..9653f47 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -404,10 +404,12 @@
void i2400m_rx_fake_eth_header(struct net_device *net_dev,
void *_eth_hdr, __be16 protocol)
{
+ struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct ethhdr *eth_hdr = _eth_hdr;
memcpy(eth_hdr->h_dest, net_dev->dev_addr, sizeof(eth_hdr->h_dest));
- memset(eth_hdr->h_source, 0, sizeof(eth_hdr->h_dest));
+ memcpy(eth_hdr->h_source, i2400m->src_mac_addr,
+ sizeof(eth_hdr->h_source));
eth_hdr->h_proto = protocol;
}
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index f9fc389..7643850 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -177,7 +177,8 @@
struct i2400m_work *iw =
container_of(ws, struct i2400m_work, ws);
struct i2400m_report_hook_args *args = (void *) iw->pl;
- i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
+ if (iw->i2400m->ready)
+ i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
kfree_skb(args->skb_rx);
i2400m_put(iw->i2400m);
kfree(iw);
@@ -309,6 +310,9 @@
skb_get(skb_rx);
i2400m_queue_work(i2400m, i2400m_report_hook_work,
GFP_KERNEL, &args, sizeof(args));
+ if (unlikely(i2400m->trace_msg_from_user))
+ wimax_msg(&i2400m->wimax_dev, "echo",
+ l3l4_hdr, size, GFP_KERNEL);
result = wimax_msg(&i2400m->wimax_dev, NULL, l3l4_hdr, size,
GFP_KERNEL);
if (result < 0)
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 5ac5e767..777c981 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -409,20 +409,20 @@
i2400m->bus_fw_names = i2400ms_bus_fw_names;
i2400m->bus_bm_mac_addr_impaired = 1;
+ sdio_claim_host(func);
+ result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+ sdio_release_host(func);
+ if (result < 0) {
+ dev_err(dev, "Failed to set block size: %d\n", result);
+ goto error_set_blk_size;
+ }
+
result = i2400ms_enable_function(i2400ms->func);
if (result < 0) {
dev_err(dev, "Cannot enable SDIO function: %d\n", result);
goto error_func_enable;
}
- sdio_claim_host(func);
- result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
- if (result < 0) {
- dev_err(dev, "Failed to set block size: %d\n", result);
- goto error_set_blk_size;
- }
- sdio_release_host(func);
-
result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
if (result < 0) {
dev_err(dev, "cannot setup device: %d\n", result);
@@ -440,12 +440,12 @@
error_debugfs_add:
i2400m_release(i2400m);
error_setup:
- sdio_set_drvdata(func, NULL);
sdio_claim_host(func);
-error_set_blk_size:
sdio_disable_func(func);
sdio_release_host(func);
error_func_enable:
+error_set_blk_size:
+ sdio_set_drvdata(func, NULL);
free_netdev(net_dev);
error_alloc_netdev:
return result;
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index ca4151a..1785132 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -505,27 +505,52 @@
#ifdef CONFIG_PM
struct usb_device *usb_dev = i2400mu->usb_dev;
#endif
+ unsigned is_autosuspend = 0;
struct i2400m *i2400m = &i2400mu->i2400m;
+#ifdef CONFIG_PM
+ if (usb_dev->auto_pm > 0)
+ is_autosuspend = 1;
+#endif
+
d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
if (i2400m->updown == 0)
goto no_firmware;
- d_printf(1, dev, "fw up, requesting standby\n");
+ if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
+ /* ugh -- the device is connected and this suspend
+ * request is an autosuspend one (not a system standby
+ * / hibernate).
+ *
+ * The only way the device can go to standby is if the
+ * link with the base station is in IDLE mode; that
+ * were the case, we'd be in status
+ * I2400M_SS_CONNECTED_IDLE. But we are not.
+ *
+ * If we *tell* him to go power save now, it'll reset
+ * as a precautionary measure, so if this is an
+ * autosuspend thing, say no and it'll come back
+ * later, when the link is IDLE
+ */
+ result = -EBADF;
+ d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
+ "not entering powersave\n");
+ goto error_not_now;
+ }
+ d_printf(1, dev, "fw up: entering powersave\n");
atomic_dec(&i2400mu->do_autopm);
result = i2400m_cmd_enter_powersave(i2400m);
atomic_inc(&i2400mu->do_autopm);
-#ifdef CONFIG_PM
- if (result < 0 && usb_dev->auto_pm == 0) {
+ if (result < 0 && !is_autosuspend) {
/* System suspend, can't fail */
dev_err(dev, "failed to suspend, will reset on resume\n");
result = 0;
}
-#endif
if (result < 0)
goto error_enter_powersave;
i2400mu_notification_release(i2400mu);
- d_printf(1, dev, "fw up, got standby\n");
+ d_printf(1, dev, "powersave requested\n");
error_enter_powersave:
+error_not_now:
no_firmware:
d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
iface, pm_msg.event, result);
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index c89de7f..4fdcc56 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -59,7 +59,7 @@
* M - Major: change if removing or modifying an existing call.
* m - minor: change when adding a new call
*/
- WIMAX_GNL_VERSION = 00,
+ WIMAX_GNL_VERSION = 01,
/* Generic NetLink attributes */
WIMAX_GNL_ATTR_INVALID = 0x00,
WIMAX_GNL_ATTR_MAX = 10,
@@ -78,6 +78,7 @@
WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */
WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */
WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */
+ WIMAX_GNL_OP_STATE_GET, /* Request for current state */
};
@@ -113,6 +114,10 @@
WIMAX_GNL_RESET_IFIDX = 1,
};
+/* Atributes for wimax_state_get() */
+enum {
+ WIMAX_GNL_STGET_IFIDX = 1,
+};
/*
* Attributes for the Report State Change
diff --git a/net/wimax/Makefile b/net/wimax/Makefile
index 5b80b94..8f1510d 100644
--- a/net/wimax/Makefile
+++ b/net/wimax/Makefile
@@ -6,6 +6,7 @@
op-msg.o \
op-reset.o \
op-rfkill.o \
+ op-state-get.o \
stack.o
wimax-$(CONFIG_DEBUG_FS) += debugfs.o
diff --git a/net/wimax/debug-levels.h b/net/wimax/debug-levels.h
index 1c29123..0975adb 100644
--- a/net/wimax/debug-levels.h
+++ b/net/wimax/debug-levels.h
@@ -36,6 +36,7 @@
D_SUBMODULE_DECLARE(op_msg),
D_SUBMODULE_DECLARE(op_reset),
D_SUBMODULE_DECLARE(op_rfkill),
+ D_SUBMODULE_DECLARE(op_state_get),
D_SUBMODULE_DECLARE(stack),
};
diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c
index 94d216a..6c9bedb 100644
--- a/net/wimax/debugfs.c
+++ b/net/wimax/debugfs.c
@@ -61,6 +61,7 @@
__debugfs_register("wimax_dl_", op_msg, dentry);
__debugfs_register("wimax_dl_", op_reset, dentry);
__debugfs_register("wimax_dl_", op_rfkill, dentry);
+ __debugfs_register("wimax_dl_", op_state_get, dentry);
__debugfs_register("wimax_dl_", stack, dentry);
result = 0;
out:
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index 9ad4d89..d631a17 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -108,6 +108,12 @@
* Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
* wimax_msg_send() depends on skb->data being placed at the
* beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
*/
struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
const char *pipe_name,
@@ -115,7 +121,7 @@
gfp_t gfp_flags)
{
int result;
- struct device *dev = wimax_dev->net_dev->dev.parent;
+ struct device *dev = wimax_dev_to_dev(wimax_dev);
size_t msg_size;
void *genl_msg;
struct sk_buff *skb;
@@ -161,7 +167,6 @@
error_new:
nlmsg_free(skb);
return ERR_PTR(result);
-
}
EXPORT_SYMBOL_GPL(wimax_msg_alloc);
@@ -256,10 +261,16 @@
* Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
* wimax_msg_send() depends on skb->data being placed at the
* beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
*/
int wimax_msg_send(struct wimax_dev *wimax_dev, struct sk_buff *skb)
{
- struct device *dev = wimax_dev->net_dev->dev.parent;
+ struct device *dev = wimax_dev_to_dev(wimax_dev);
void *msg = skb->data;
size_t size = skb->len;
might_sleep();
diff --git a/net/wimax/op-state-get.c b/net/wimax/op-state-get.c
new file mode 100644
index 0000000..a76b8fc
--- /dev/null
+++ b/net/wimax/op-state-get.c
@@ -0,0 +1,86 @@
+/*
+ * Linux WiMAX
+ * Implement and export a method for getting a WiMAX device current state
+ *
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on previous WiMAX core work by:
+ * Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <net/wimax.h>
+#include <net/genetlink.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE op_state_get
+#include "debug-levels.h"
+
+
+static const
+struct nla_policy wimax_gnl_state_get_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+ [WIMAX_GNL_STGET_IFIDX] = {
+ .type = NLA_U32,
+ },
+};
+
+
+/*
+ * Exporting to user space over generic netlink
+ *
+ * Parse the state get command from user space, return a combination
+ * value that describe the current state.
+ *
+ * No attributes.
+ */
+static
+int wimax_gnl_doit_state_get(struct sk_buff *skb, struct genl_info *info)
+{
+ int result, ifindex;
+ struct wimax_dev *wimax_dev;
+ struct device *dev;
+
+ d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+ result = -ENODEV;
+ if (info->attrs[WIMAX_GNL_STGET_IFIDX] == NULL) {
+ printk(KERN_ERR "WIMAX_GNL_OP_STATE_GET: can't find IFIDX "
+ "attribute\n");
+ goto error_no_wimax_dev;
+ }
+ ifindex = nla_get_u32(info->attrs[WIMAX_GNL_STGET_IFIDX]);
+ wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+ if (wimax_dev == NULL)
+ goto error_no_wimax_dev;
+ dev = wimax_dev_to_dev(wimax_dev);
+ /* Execute the operation and send the result back to user space */
+ result = wimax_state_get(wimax_dev);
+ dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+ d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+ return result;
+}
+
+
+struct genl_ops wimax_gnl_state_get = {
+ .cmd = WIMAX_GNL_OP_STATE_GET,
+ .flags = GENL_ADMIN_PERM,
+ .policy = wimax_gnl_state_get_policy,
+ .doit = wimax_gnl_doit_state_get,
+ .dumpit = NULL,
+};
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index 933e142..79fb7d7 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -402,13 +402,15 @@
extern struct genl_ops
wimax_gnl_msg_from_user,
wimax_gnl_reset,
- wimax_gnl_rfkill;
+ wimax_gnl_rfkill,
+ wimax_gnl_state_get;
static
struct genl_ops *wimax_gnl_ops[] = {
&wimax_gnl_msg_from_user,
&wimax_gnl_reset,
&wimax_gnl_rfkill,
+ &wimax_gnl_state_get,
};
@@ -533,6 +535,7 @@
D_SUBMODULE_DEFINE(op_msg),
D_SUBMODULE_DEFINE(op_reset),
D_SUBMODULE_DEFINE(op_rfkill),
+ D_SUBMODULE_DEFINE(op_state_get),
D_SUBMODULE_DEFINE(stack),
};
size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);