[MIPS] Create consistency in "system type" selection.
The "system type" Kconfig options on MIPS are not consistent. For
some platforms, only the name is listed while other entries are
prepended with "Support for". Remove this as it doesn't make sense
when describing the "system type".
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ee5fbb0..ceca3bc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,7 +13,7 @@
default SGI_IP22
config MIPS_MTX1
- bool "Support for 4G Systems MTX-1 board"
+ bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
@@ -120,7 +120,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
- bool "Support for Cobalt Server"
+ bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
@@ -132,7 +132,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
- bool "Support for DECstations"
+ bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
@@ -158,7 +158,7 @@
otherwise choose R3000.
config MIPS_EV64120
- bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -175,7 +175,7 @@
kernel for this platform.
config MIPS_EV96100
- bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -195,7 +195,7 @@
here if you wish to build a kernel for this platform.
config MIPS_IVR
- bool "Support for Globespan IVR board"
+ bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@@ -211,7 +211,7 @@
build a kernel for this platform.
config MIPS_ITE8172
- bool "Support for ITE 8172G board"
+ bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@@ -228,7 +228,7 @@
a kernel for this platform.
config MACH_JAZZ
- bool "Support for the Jazz family of machines"
+ bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@@ -246,7 +246,7 @@
Olivetti M700-10 workstations.
config LASAT
- bool "Support for LASAT Networks platforms"
+ bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
@@ -258,7 +258,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
- bool "Support for MIPS Atlas board"
+ bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
@@ -283,7 +283,7 @@
board.
config MIPS_MALTA
- bool "Support for MIPS Malta board"
+ bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
@@ -311,7 +311,7 @@
board.
config MIPS_SEAD
- bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+ bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
@@ -328,7 +328,7 @@
board.
config MIPS_SIM
- bool 'Support for MIPS simulator (MIPSsim)'
+ bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -341,7 +341,7 @@
emulator.
config MOMENCO_JAGUAR_ATX
- bool "Support for Momentum Jaguar board"
+ bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -361,7 +361,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
- bool "Support for Momentum Ocelot board"
+ bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -378,7 +378,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
- bool "Support for Momentum Ocelot-3 board"
+ bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -397,7 +397,7 @@
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
- bool "Support for Momentum Ocelot-C board"
+ bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -414,7 +414,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
- bool "Support for Momentum Ocelot-G board"
+ bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -431,23 +431,23 @@
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
- bool "Support for MyCable XXS1500 board"
+ bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
- bool "Support for Philips PNX8550 based Viper2-PCI board"
+ bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
- bool "Support for Philips PNX8550 based JBS board"
+ bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
- bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+ bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
@@ -465,7 +465,7 @@
evaluation board.
config DDB5476
- bool "Support for NEC DDB Vrc-5476"
+ bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
@@ -486,7 +486,7 @@
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
- bool "Support for NEC DDB Vrc-5477"
+ bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -504,13 +504,13 @@
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "Support for NEC VR4100 series based machines"
+ bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
- bool "Support for PMC-Sierra Yosemite eval board"
+ bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -527,7 +527,7 @@
manufactured by PMC-Sierra.
config QEMU
- bool "Support for Qemu"
+ bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
@@ -547,7 +547,7 @@
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
- bool "Support for SGI IP22 (Indy/Indigo2)"
+ bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
@@ -567,7 +567,7 @@
that runs on these, say Y here.
config SGI_IP27
- bool "Support for SGI IP27 (Origin200/2000)"
+ bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
@@ -583,7 +583,7 @@
here.
config SGI_IP32
- bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+ bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
@@ -604,7 +604,7 @@
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
- bool "Support for Sibyte BCM91480B-BigSur"
+ bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
@@ -615,7 +615,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
- bool "Support for Sibyte BCM91250A-SWARM"
+ bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
@@ -626,7 +626,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
- bool "Support for Sibyte BCM91250E-Sentosa"
+ bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -637,7 +637,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
- bool "Support for Sibyte BCM91125E-Rhone"
+ bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -648,7 +648,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
- bool "Support for Sibyte BCM91120x-Carmel"
+ bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -659,7 +659,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
- bool "Support for Sibyte BCM91250PT-PTSWARM"
+ bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -671,7 +671,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
- bool "Support for Sibyte BCM91250C2-LittleSur"
+ bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -683,7 +683,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
- bool "Support for Sibyte BCM91120C-CRhine"
+ bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -694,7 +694,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
- bool "Support for Sibyte BCM91125C-CRhone"
+ bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -706,7 +706,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
- bool "Support for SNI RM200 PCI"
+ bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@@ -732,7 +732,7 @@
support this machine type.
config TOSHIBA_JMR3927
- bool "Support for Toshiba JMR-TX3927 board"
+ bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
@@ -743,7 +743,7 @@
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
- bool "Support for Toshiba TBTX49[23]7 board"
+ bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
@@ -760,7 +760,7 @@
support this machine type
config TOSHIBA_RBTX4938
- bool "Support for Toshiba RBTX4938 board"
+ bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA