| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/socinfo.h> |
| #include "spm.h" |
| #include "spm_driver.h" |
| |
| struct msm_spm_power_modes { |
| uint32_t mode; |
| bool notify_rpm; |
| uint32_t start_addr; |
| |
| }; |
| |
| struct msm_spm_device { |
| struct msm_spm_driver_data reg_data; |
| struct msm_spm_power_modes *modes; |
| uint32_t num_modes; |
| }; |
| |
| struct msm_spm_vdd_info { |
| uint32_t cpu; |
| uint32_t vlevel; |
| int err; |
| }; |
| |
| static struct msm_spm_device msm_spm_l2_device; |
| static DEFINE_PER_CPU_SHARED_ALIGNED(struct msm_spm_device, msm_cpu_spm_device); |
| |
| |
| /* Must be called on the same cpu as the one being set to */ |
| static void msm_spm_smp_set_vdd(void *data) |
| { |
| struct msm_spm_device *dev; |
| struct msm_spm_vdd_info *info = (struct msm_spm_vdd_info *)data; |
| |
| dev = &per_cpu(msm_cpu_spm_device, info->cpu); |
| info->err = msm_spm_drv_set_vdd(&dev->reg_data, info->vlevel); |
| } |
| |
| int msm_spm_set_vdd(unsigned int cpu, unsigned int vlevel) |
| { |
| struct msm_spm_vdd_info info; |
| int ret; |
| |
| info.cpu = cpu; |
| info.vlevel = vlevel; |
| |
| /* Set to true to block on vdd change */ |
| ret = smp_call_function_single(cpu, msm_spm_smp_set_vdd, &info, true); |
| if (!ret) |
| ret = info.err; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(msm_spm_set_vdd); |
| |
| static int msm_spm_dev_set_low_power_mode(struct msm_spm_device *dev, |
| unsigned int mode, bool notify_rpm) |
| { |
| uint32_t i; |
| uint32_t start_addr = 0; |
| int ret = -EINVAL; |
| |
| if (mode == MSM_SPM_MODE_DISABLED) { |
| ret = msm_spm_drv_set_spm_enable(&dev->reg_data, false); |
| } else if (!msm_spm_drv_set_spm_enable(&dev->reg_data, true)) { |
| for (i = 0; i < dev->num_modes; i++) { |
| if ((dev->modes[i].mode == mode) && |
| (dev->modes[i].notify_rpm == notify_rpm)) { |
| start_addr = dev->modes[i].start_addr; |
| break; |
| } |
| } |
| ret = msm_spm_drv_set_low_power_mode(&dev->reg_data, |
| start_addr); |
| } |
| return ret; |
| } |
| |
| static int __devinit msm_spm_dev_init(struct msm_spm_device *dev, |
| struct msm_spm_platform_data *data) |
| { |
| int i, ret = -ENOMEM; |
| uint32_t offset = 0; |
| |
| dev->num_modes = data->num_modes; |
| dev->modes = kmalloc( |
| sizeof(struct msm_spm_power_modes) * dev->num_modes, |
| GFP_KERNEL); |
| |
| if (!dev->modes) |
| goto spm_failed_malloc; |
| |
| dev->reg_data.ver_reg = data->ver_reg; |
| ret = msm_spm_drv_init(&dev->reg_data, data); |
| |
| if (ret) |
| goto spm_failed_init; |
| |
| for (i = 0; i < dev->num_modes; i++) { |
| |
| /* Default offset is 0 and gets updated as we write more |
| * sequences into SPM |
| */ |
| dev->modes[i].start_addr = offset; |
| ret = msm_spm_drv_write_seq_data(&dev->reg_data, |
| data->modes[i].cmd, &offset); |
| if (ret < 0) |
| goto spm_failed_init; |
| |
| dev->modes[i].mode = data->modes[i].mode; |
| dev->modes[i].notify_rpm = data->modes[i].notify_rpm; |
| } |
| msm_spm_drv_flush_seq_entry(&dev->reg_data); |
| return 0; |
| |
| spm_failed_init: |
| kfree(dev->modes); |
| spm_failed_malloc: |
| return ret; |
| } |
| |
| int msm_spm_turn_on_cpu_rail(unsigned int cpu) |
| { |
| uint32_t val = 0; |
| uint32_t timeout = 0; |
| void *reg = NULL; |
| void *saw_bases[] = { |
| 0, |
| MSM_SAW1_BASE, |
| MSM_SAW2_BASE, |
| MSM_SAW3_BASE |
| }; |
| |
| if (cpu == 0 || cpu >= num_possible_cpus()) |
| return -EINVAL; |
| |
| reg = saw_bases[cpu]; |
| |
| if (cpu_is_msm8960() || cpu_is_msm8930() || cpu_is_msm8930aa() || |
| cpu_is_apq8064() || cpu_is_msm8627() || cpu_is_msm8960ab()) { |
| val = 0xA4; |
| reg += 0x14; |
| timeout = 512; |
| } else { |
| return -ENOSYS; |
| } |
| |
| writel_relaxed(val, reg); |
| mb(); |
| udelay(timeout); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(msm_spm_turn_on_cpu_rail); |
| |
| void msm_spm_reinit(void) |
| { |
| unsigned int cpu; |
| for_each_possible_cpu(cpu) |
| msm_spm_drv_reinit(&per_cpu(msm_cpu_spm_device.reg_data, cpu)); |
| } |
| EXPORT_SYMBOL(msm_spm_reinit); |
| |
| int msm_spm_set_low_power_mode(unsigned int mode, bool notify_rpm) |
| { |
| struct msm_spm_device *dev = &__get_cpu_var(msm_cpu_spm_device); |
| return msm_spm_dev_set_low_power_mode(dev, mode, notify_rpm); |
| } |
| EXPORT_SYMBOL(msm_spm_set_low_power_mode); |
| |
| /* Board file init function */ |
| int __init msm_spm_init(struct msm_spm_platform_data *data, int nr_devs) |
| { |
| unsigned int cpu; |
| int ret = 0; |
| |
| BUG_ON((nr_devs < num_possible_cpus()) || !data); |
| |
| for_each_possible_cpu(cpu) { |
| struct msm_spm_device *dev = &per_cpu(msm_cpu_spm_device, cpu); |
| ret = msm_spm_dev_init(dev, &data[cpu]); |
| if (ret < 0) { |
| pr_warn("%s():failed CPU:%u ret:%d\n", __func__, |
| cpu, ret); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_MSM_L2_SPM |
| |
| int msm_spm_l2_set_low_power_mode(unsigned int mode, bool notify_rpm) |
| { |
| return msm_spm_dev_set_low_power_mode( |
| &msm_spm_l2_device, mode, notify_rpm); |
| } |
| EXPORT_SYMBOL(msm_spm_l2_set_low_power_mode); |
| |
| void msm_spm_l2_reinit(void) |
| { |
| msm_spm_drv_reinit(&msm_spm_l2_device.reg_data); |
| } |
| EXPORT_SYMBOL(msm_spm_l2_reinit); |
| |
| int msm_spm_apcs_set_vdd(unsigned int vlevel) |
| { |
| return msm_spm_drv_set_vdd(&msm_spm_l2_device.reg_data, vlevel); |
| } |
| EXPORT_SYMBOL(msm_spm_apcs_set_vdd); |
| |
| int msm_spm_apcs_set_phase(unsigned int phase_cnt) |
| { |
| return msm_spm_drv_set_phase(&msm_spm_l2_device.reg_data, phase_cnt); |
| } |
| EXPORT_SYMBOL(msm_spm_apcs_set_phase); |
| |
| /* Board file init function */ |
| int __init msm_spm_l2_init(struct msm_spm_platform_data *data) |
| { |
| return msm_spm_dev_init(&msm_spm_l2_device, data); |
| } |
| #endif |
| |
| static int __devinit msm_spm_dev_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| int cpu = 0; |
| int i = 0; |
| struct device_node *node = pdev->dev.of_node; |
| struct msm_spm_platform_data spm_data; |
| char *key = NULL; |
| uint32_t val = 0; |
| struct msm_spm_seq_entry modes[MSM_SPM_MODE_NR]; |
| size_t len = 0; |
| struct msm_spm_device *dev = NULL; |
| struct resource *res = NULL; |
| uint32_t mode_count = 0; |
| |
| struct spm_of { |
| char *key; |
| uint32_t id; |
| }; |
| |
| struct spm_of spm_of_data[] = { |
| {"qcom,saw2-cfg", MSM_SPM_REG_SAW2_CFG}, |
| {"qcom,saw2-avs-ctl", MSM_SPM_REG_SAW2_AVS_CTL}, |
| {"qcom,saw2-avs-hysteresis", MSM_SPM_REG_SAW2_AVS_HYSTERESIS}, |
| {"qcom,saw2-avs-limit", MSM_SPM_REG_SAW2_AVS_LIMIT}, |
| {"qcom,saw2-avs-dly", MSM_SPM_REG_SAW2_AVS_DLY}, |
| {"qcom,saw2-spm-dly", MSM_SPM_REG_SAW2_SPM_DLY}, |
| {"qcom,saw2-spm-ctl", MSM_SPM_REG_SAW2_SPM_CTL}, |
| {"qcom,saw2-pmic-data0", MSM_SPM_REG_SAW2_PMIC_DATA_0}, |
| {"qcom,saw2-pmic-data1", MSM_SPM_REG_SAW2_PMIC_DATA_1}, |
| {"qcom,saw2-pmic-data2", MSM_SPM_REG_SAW2_PMIC_DATA_2}, |
| {"qcom,saw2-pmic-data3", MSM_SPM_REG_SAW2_PMIC_DATA_3}, |
| {"qcom,saw2-pmic-data4", MSM_SPM_REG_SAW2_PMIC_DATA_4}, |
| {"qcom,saw2-pmic-data5", MSM_SPM_REG_SAW2_PMIC_DATA_5}, |
| {"qcom,saw2-pmic-data6", MSM_SPM_REG_SAW2_PMIC_DATA_6}, |
| {"qcom,saw2-pmic-data7", MSM_SPM_REG_SAW2_PMIC_DATA_7}, |
| }; |
| |
| struct mode_of { |
| char *key; |
| uint32_t id; |
| uint32_t notify_rpm; |
| }; |
| |
| struct mode_of of_cpu_modes[] = { |
| {"qcom,saw2-spm-cmd-wfi", MSM_SPM_MODE_CLOCK_GATING, 0}, |
| {"qcom,saw2-spm-cmd-ret", MSM_SPM_MODE_POWER_RETENTION, 0}, |
| {"qcom,saw2-spm-cmd-spc", MSM_SPM_MODE_POWER_COLLAPSE, 0}, |
| {"qcom,saw2-spm-cmd-pc", MSM_SPM_MODE_POWER_COLLAPSE, 1}, |
| }; |
| |
| struct mode_of of_l2_modes[] = { |
| {"qcom,saw2-spm-cmd-ret", MSM_SPM_L2_MODE_RETENTION, 1}, |
| {"qcom,saw2-spm-cmd-gdhs", MSM_SPM_L2_MODE_GDHS, 1}, |
| {"qcom,saw2-spm-cmd-pc", MSM_SPM_L2_MODE_POWER_COLLAPSE, 1}, |
| }; |
| |
| struct mode_of *mode_of_data; |
| int num_modes; |
| |
| memset(&spm_data, 0, sizeof(struct msm_spm_platform_data)); |
| memset(&modes, 0, |
| (MSM_SPM_MODE_NR - 2) * sizeof(struct msm_spm_seq_entry)); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| goto fail; |
| |
| spm_data.reg_base_addr = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!spm_data.reg_base_addr) |
| return -ENOMEM; |
| |
| key = "qcom,core-id"; |
| ret = of_property_read_u32(node, key, &val); |
| if (ret) |
| goto fail; |
| cpu = val; |
| |
| key = "qcom,saw2-ver-reg"; |
| ret = of_property_read_u32(node, key, &val); |
| if (ret) |
| goto fail; |
| spm_data.ver_reg = val; |
| |
| key = "qcom,vctl-timeout-us"; |
| ret = of_property_read_u32(node, key, &val); |
| if (!ret) |
| spm_data.vctl_timeout_us = val; |
| |
| /* optional */ |
| key = "qcom,vctl-port"; |
| ret = of_property_read_u32(node, key, &val); |
| if (!ret) |
| spm_data.vctl_port = val; |
| |
| /* optional */ |
| key = "qcom,phase-port"; |
| ret = of_property_read_u32(node, key, &val); |
| if (!ret) |
| spm_data.phase_port = val; |
| |
| for (i = 0; i < ARRAY_SIZE(spm_of_data); i++) { |
| ret = of_property_read_u32(node, spm_of_data[i].key, &val); |
| if (ret) |
| continue; |
| spm_data.reg_init_values[spm_of_data[i].id] = val; |
| } |
| |
| /* |
| * Device with id 0..NR_CPUS are SPM for apps cores |
| * Device with id 0xFFFF is for L2 SPM. |
| */ |
| if (cpu >= 0 && cpu < num_possible_cpus()) { |
| mode_of_data = of_cpu_modes; |
| num_modes = ARRAY_SIZE(of_cpu_modes); |
| dev = &per_cpu(msm_cpu_spm_device, cpu); |
| |
| } else { |
| mode_of_data = of_l2_modes; |
| num_modes = ARRAY_SIZE(of_l2_modes); |
| dev = &msm_spm_l2_device; |
| } |
| |
| for (i = 0; i < num_modes; i++) { |
| key = mode_of_data[i].key; |
| modes[mode_count].cmd = |
| (uint8_t *)of_get_property(node, key, &len); |
| if (!modes[mode_count].cmd) |
| continue; |
| modes[mode_count].mode = mode_of_data[i].id; |
| modes[mode_count].notify_rpm = mode_of_data[i].notify_rpm; |
| mode_count++; |
| } |
| |
| spm_data.modes = modes; |
| spm_data.num_modes = mode_count; |
| |
| ret = msm_spm_dev_init(dev, &spm_data); |
| |
| if (ret < 0) |
| pr_warn("%s():failed core-id:%u ret:%d\n", __func__, cpu, ret); |
| |
| return ret; |
| |
| fail: |
| pr_err("%s: Failed reading node=%s, key=%s\n", |
| __func__, node->full_name, key); |
| return -EFAULT; |
| } |
| |
| static struct of_device_id msm_spm_match_table[] = { |
| {.compatible = "qcom,spm-v2"}, |
| {}, |
| }; |
| |
| static struct platform_driver msm_spm_device_driver = { |
| .probe = msm_spm_dev_probe, |
| .driver = { |
| .name = "spm-v2", |
| .owner = THIS_MODULE, |
| .of_match_table = msm_spm_match_table, |
| }, |
| }; |
| |
| int __init msm_spm_device_init(void) |
| { |
| return platform_driver_register(&msm_spm_device_driver); |
| } |