| /* |
| * |
| * BRIEF MODULE DESCRIPTION |
| * Au1000 reset routines. |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <asm/mach-au1x00/au1000.h> |
| |
| extern int au_sleep(void); |
| extern void (*flush_cache_all)(void); |
| |
| void au1000_restart(char *command) |
| { |
| /* Set all integrated peripherals to disabled states */ |
| extern void board_reset(void); |
| u32 prid = read_c0_prid(); |
| |
| printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); |
| switch (prid & 0xFF000000) |
| { |
| case 0x00000000: /* Au1000 */ |
| au_writel(0x02, 0xb0000010); /* ac97_enable */ |
| au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ |
| asm("sync"); |
| au_writel(0x00, 0xb017fffc); /* usbh_enable */ |
| au_writel(0x00, 0xb0200058); /* usbd_enable */ |
| au_writel(0x00, 0xb0300040); /* ir_enable */ |
| au_writel(0x00, 0xb4004104); /* mac dma */ |
| au_writel(0x00, 0xb4004114); /* mac dma */ |
| au_writel(0x00, 0xb4004124); /* mac dma */ |
| au_writel(0x00, 0xb4004134); /* mac dma */ |
| au_writel(0x00, 0xb0520000); /* macen0 */ |
| au_writel(0x00, 0xb0520004); /* macen1 */ |
| au_writel(0x00, 0xb1000008); /* i2s_enable */ |
| au_writel(0x00, 0xb1100100); /* uart0_enable */ |
| au_writel(0x00, 0xb1200100); /* uart1_enable */ |
| au_writel(0x00, 0xb1300100); /* uart2_enable */ |
| au_writel(0x00, 0xb1400100); /* uart3_enable */ |
| au_writel(0x02, 0xb1600100); /* ssi0_enable */ |
| au_writel(0x02, 0xb1680100); /* ssi1_enable */ |
| au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ |
| au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ |
| au_writel(0x00, 0xb1900028); /* sys_clksrc */ |
| au_writel(0x10, 0xb1900060); /* sys_cpupll */ |
| au_writel(0x00, 0xb1900064); /* sys_auxpll */ |
| au_writel(0x00, 0xb1900100); /* sys_pininputen */ |
| break; |
| case 0x01000000: /* Au1500 */ |
| au_writel(0x02, 0xb0000010); /* ac97_enable */ |
| au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ |
| asm("sync"); |
| au_writel(0x00, 0xb017fffc); /* usbh_enable */ |
| au_writel(0x00, 0xb0200058); /* usbd_enable */ |
| au_writel(0x00, 0xb4004104); /* mac dma */ |
| au_writel(0x00, 0xb4004114); /* mac dma */ |
| au_writel(0x00, 0xb4004124); /* mac dma */ |
| au_writel(0x00, 0xb4004134); /* mac dma */ |
| au_writel(0x00, 0xb1520000); /* macen0 */ |
| au_writel(0x00, 0xb1520004); /* macen1 */ |
| au_writel(0x00, 0xb1100100); /* uart0_enable */ |
| au_writel(0x00, 0xb1400100); /* uart3_enable */ |
| au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ |
| au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ |
| au_writel(0x00, 0xb1900028); /* sys_clksrc */ |
| au_writel(0x10, 0xb1900060); /* sys_cpupll */ |
| au_writel(0x00, 0xb1900064); /* sys_auxpll */ |
| au_writel(0x00, 0xb1900100); /* sys_pininputen */ |
| break; |
| case 0x02000000: /* Au1100 */ |
| au_writel(0x02, 0xb0000010); /* ac97_enable */ |
| au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ |
| asm("sync"); |
| au_writel(0x00, 0xb017fffc); /* usbh_enable */ |
| au_writel(0x00, 0xb0200058); /* usbd_enable */ |
| au_writel(0x00, 0xb0300040); /* ir_enable */ |
| au_writel(0x00, 0xb4004104); /* mac dma */ |
| au_writel(0x00, 0xb4004114); /* mac dma */ |
| au_writel(0x00, 0xb4004124); /* mac dma */ |
| au_writel(0x00, 0xb4004134); /* mac dma */ |
| au_writel(0x00, 0xb0520000); /* macen0 */ |
| au_writel(0x00, 0xb1000008); /* i2s_enable */ |
| au_writel(0x00, 0xb1100100); /* uart0_enable */ |
| au_writel(0x00, 0xb1200100); /* uart1_enable */ |
| au_writel(0x00, 0xb1400100); /* uart3_enable */ |
| au_writel(0x02, 0xb1600100); /* ssi0_enable */ |
| au_writel(0x02, 0xb1680100); /* ssi1_enable */ |
| au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ |
| au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ |
| au_writel(0x00, 0xb1900028); /* sys_clksrc */ |
| au_writel(0x10, 0xb1900060); /* sys_cpupll */ |
| au_writel(0x00, 0xb1900064); /* sys_auxpll */ |
| au_writel(0x00, 0xb1900100); /* sys_pininputen */ |
| break; |
| case 0x03000000: /* Au1550 */ |
| au_writel(0x00, 0xb1a00004); /* psc 0 */ |
| au_writel(0x00, 0xb1b00004); /* psc 1 */ |
| au_writel(0x00, 0xb0a00004); /* psc 2 */ |
| au_writel(0x00, 0xb0b00004); /* psc 3 */ |
| au_writel(0x00, 0xb017fffc); /* usbh_enable */ |
| au_writel(0x00, 0xb0200058); /* usbd_enable */ |
| au_writel(0x00, 0xb4004104); /* mac dma */ |
| au_writel(0x00, 0xb4004114); /* mac dma */ |
| au_writel(0x00, 0xb4004124); /* mac dma */ |
| au_writel(0x00, 0xb4004134); /* mac dma */ |
| au_writel(0x00, 0xb1520000); /* macen0 */ |
| au_writel(0x00, 0xb1520004); /* macen1 */ |
| au_writel(0x00, 0xb1100100); /* uart0_enable */ |
| au_writel(0x00, 0xb1200100); /* uart1_enable */ |
| au_writel(0x00, 0xb1400100); /* uart3_enable */ |
| au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ |
| au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ |
| au_writel(0x00, 0xb1900028); /* sys_clksrc */ |
| au_writel(0x10, 0xb1900060); /* sys_cpupll */ |
| au_writel(0x00, 0xb1900064); /* sys_auxpll */ |
| au_writel(0x00, 0xb1900100); /* sys_pininputen */ |
| break; |
| |
| default: |
| break; |
| } |
| |
| set_c0_status(ST0_BEV | ST0_ERL); |
| change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); |
| flush_cache_all(); |
| write_c0_wired(0); |
| |
| /* Give board a chance to do a hardware reset */ |
| board_reset(); |
| |
| /* Jump to the beggining in case board_reset() is empty */ |
| __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); |
| } |
| |
| void au1000_halt(void) |
| { |
| #if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) |
| /* power off system */ |
| printk("\n** Powering off...\n"); |
| au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); |
| au_sync(); |
| while(1); /* should not get here */ |
| #else |
| printk(KERN_NOTICE "\n** You can safely turn off the power\n"); |
| #ifdef CONFIG_MIPS_MIRAGE |
| au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); |
| #endif |
| #ifdef CONFIG_MIPS_DB1200 |
| au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C); |
| #endif |
| #ifdef CONFIG_PM |
| au_sleep(); |
| |
| /* should not get here */ |
| printk(KERN_ERR "Unable to put cpu in sleep mode\n"); |
| while(1); |
| #else |
| while (1) |
| __asm__(".set\tmips3\n\t" |
| "wait\n\t" |
| ".set\tmips0"); |
| #endif |
| #endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ |
| } |
| |
| void au1000_power_off(void) |
| { |
| au1000_halt(); |
| } |