staging: bcm: led_control.c: breaking of long lines
Signed-off-by: Johannes Tenschert <Johannes.Tenschert@informatik.stud.uni-erlangen.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/bcm/led_control.c b/drivers/staging/bcm/led_control.c
index 82b9110..c7f4886 100644
--- a/drivers/staging/bcm/led_control.c
+++ b/drivers/staging/bcm/led_control.c
@@ -23,7 +23,8 @@
return TRUE;
}
-static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULONG timeout, INT num_of_time, LedEventInfo_t currdriverstate)
+static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex,
+ ULONG timeout, INT num_of_time, LedEventInfo_t currdriverstate)
{
int Status = STATUS_SUCCESS;
BOOLEAN bInfinite = FALSE;
@@ -38,13 +39,18 @@
TURN_ON_LED(GPIO_Num, uiLedIndex);
/* Wait for timeout after setting on the LED */
- Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
- currdriverstate != Adapter->DriverState || kthread_should_stop(),
- msecs_to_jiffies(timeout));
+ Status = wait_event_interruptible_timeout(
+ Adapter->LEDInfo.notify_led_event,
+ currdriverstate != Adapter->DriverState ||
+ kthread_should_stop(),
+ msecs_to_jiffies(timeout));
if (kthread_should_stop()) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "Led thread got signal to exit..hence exiting");
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(GPIO_Num, uiLedIndex);
Status = EVENT_SIGNALED;
break;
@@ -56,9 +62,11 @@
}
TURN_OFF_LED(GPIO_Num, uiLedIndex);
- Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
- currdriverstate != Adapter->DriverState || kthread_should_stop(),
- msecs_to_jiffies(timeout));
+ Status = wait_event_interruptible_timeout(
+ Adapter->LEDInfo.notify_led_event,
+ currdriverstate != Adapter->DriverState ||
+ kthread_should_stop(),
+ msecs_to_jiffies(timeout));
if (bInfinite == FALSE)
num_of_time--;
}
@@ -88,7 +96,8 @@
static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx,
- UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex, LedEventInfo_t currdriverstate)
+ UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex,
+ LedEventInfo_t currdriverstate)
{
/* Initial values of TX and RX packets */
ULONG64 Initial_num_of_packts_tx = 0, Initial_num_of_packts_rx = 0;
@@ -128,11 +137,15 @@
num_of_time = num_of_time_tx;
if (num_of_time > 0) {
/* Blink both Tx and Rx LEDs */
- if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)
+ if (LED_Blink(Adapter, 1 << GPIO_Num_tx,
+ uiTxLedIndex, timeout,
+ num_of_time, currdriverstate)
== EVENT_SIGNALED)
return EVENT_SIGNALED;
- if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate)
+ if (LED_Blink(Adapter, 1 << GPIO_Num_rx,
+ uiRxLedIndex, timeout,
+ num_of_time, currdriverstate)
== EVENT_SIGNALED)
return EVENT_SIGNALED;
@@ -140,15 +153,21 @@
if (num_of_time == num_of_time_tx) {
/* Blink pending rate of Rx */
- if (LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout,
- num_of_time_rx-num_of_time, currdriverstate) == EVENT_SIGNALED)
+ if (LED_Blink(Adapter, (1 << GPIO_Num_rx),
+ uiRxLedIndex, timeout,
+ num_of_time_rx-num_of_time,
+ currdriverstate)
+ == EVENT_SIGNALED)
return EVENT_SIGNALED;
num_of_time = num_of_time_rx;
} else {
/* Blink pending rate of Tx */
- if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout,
- num_of_time_tx-num_of_time, currdriverstate) == EVENT_SIGNALED)
+ if (LED_Blink(Adapter, 1 << GPIO_Num_tx,
+ uiTxLedIndex, timeout,
+ num_of_time_tx-num_of_time,
+ currdriverstate)
+ == EVENT_SIGNALED)
return EVENT_SIGNALED;
num_of_time = num_of_time_tx;
@@ -156,13 +175,17 @@
} else {
if (num_of_time == num_of_time_tx) {
/* Blink pending rate of Rx */
- if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)
+ if (LED_Blink(Adapter, 1 << GPIO_Num_tx,
+ uiTxLedIndex, timeout,
+ num_of_time, currdriverstate)
== EVENT_SIGNALED)
return EVENT_SIGNALED;
} else {
/* Blink pending rate of Tx */
- if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout,
- num_of_time, currdriverstate) == EVENT_SIGNALED)
+ if (LED_Blink(Adapter, 1 << GPIO_Num_rx,
+ uiRxLedIndex, timeout,
+ num_of_time, currdriverstate)
+ == EVENT_SIGNALED)
return EVENT_SIGNALED;
}
}
@@ -174,13 +197,18 @@
remDelay = MAX_NUM_OF_BLINKS - num_of_time;
if (remDelay > 0) {
timeout = 100 * remDelay;
- Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
- currdriverstate != Adapter->DriverState || kthread_should_stop(),
- msecs_to_jiffies(timeout));
+ Status = wait_event_interruptible_timeout(
+ Adapter->LEDInfo.notify_led_event,
+ currdriverstate != Adapter->DriverState
+ || kthread_should_stop(),
+ msecs_to_jiffies(timeout));
if (kthread_should_stop()) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+ LED_DUMP_INFO, DBG_LVL_ALL,
+ "Led thread got signal to exit..hence exiting");
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_DISABLED;
return EVENT_SIGNALED;
}
if (Status)
@@ -198,16 +226,20 @@
Final_num_of_packts_tx = Adapter->dev->stats.tx_packets;
Final_num_of_packts_rx = Adapter->dev->stats.rx_packets;
- rate_of_transfer_tx = Final_num_of_packts_tx - Initial_num_of_packts_tx;
- rate_of_transfer_rx = Final_num_of_packts_rx - Initial_num_of_packts_rx;
+ rate_of_transfer_tx = Final_num_of_packts_tx -
+ Initial_num_of_packts_tx;
+ rate_of_transfer_rx = Final_num_of_packts_rx -
+ Initial_num_of_packts_rx;
/* Read initial value of packets sent/received */
Initial_num_of_packts_tx = Final_num_of_packts_tx;
Initial_num_of_packts_rx = Final_num_of_packts_rx;
/* Scale the rate of transfer to no of blinks. */
- num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
- num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
+ num_of_time_tx =
+ ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
+ num_of_time_rx =
+ ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
}
return Status;
@@ -229,51 +261,67 @@
* <OSAL_STATUS_CODE>
* -----------------------------------------------------------------------------
*/
-static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset, USHORT usParamLen)
+static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset,
+ USHORT usParamLen)
{
INT Status = STATUS_SUCCESS;
PUCHAR puBuffer = NULL;
USHORT usChksmOrg = 0;
USHORT usChecksumCalculated = 0;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X",
+ ulParamOffset, usParamLen);
puBuffer = kmalloc(usParamLen, GFP_KERNEL);
if (!puBuffer) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum Allocation failed");
return -ENOMEM;
}
/* Read the DSD data from the parameter offset. */
- if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
+ if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer,
+ ulParamOffset, usParamLen)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
/* Calculate the checksum of the data read from the DSD parameter. */
usChecksumCalculated = CFG_CalculateChecksum(puBuffer, usParamLen);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usCheckSumCalculated = 0x%x\n", usChecksumCalculated);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread: usCheckSumCalculated = 0x%x\n",
+ usChecksumCalculated);
/*
* End of the DSD parameter will have a TWO bytes checksum stored in it.
* Read it and compare with the calculated Checksum.
*/
- if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
+ if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg,
+ ulParamOffset+usParamLen, 2)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
usChksmOrg = ntohs(usChksmOrg);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usChksmOrg = 0x%x", usChksmOrg);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread: usChksmOrg = 0x%x", usChksmOrg);
/*
* Compare the checksum calculated with the checksum read
* from DSD section
*/
if (usChecksumCalculated ^ usChksmOrg) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
@@ -316,12 +364,15 @@
if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize)
return STATUS_IMAGE_CHECKSUM_MISMATCH;
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen);
- Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread:HwParamLen = 0x%x", HwParamLen);
+ Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset,
+ HwParamLen);
return Status;
} /* ValidateHWParmStructure() */
-static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[])
+static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter,
+ UCHAR GPIO_Array[])
{
int Status = STATUS_SUCCESS;
@@ -331,13 +382,17 @@
UCHAR ucIndex = 0;
UCHAR ucGPIOInfo[32] = {0};
- BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion, EEPROM_VERSION_OFFSET, 2);
+ BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion,
+ EEPROM_VERSION_OFFSET, 2);
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "usEEPROMVersion: Minor:0x%X Major:0x%x",
+ usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));
if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) {
- BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2);
+ BeceemNVMRead(Adapter, (PUINT)&usHwParamData,
+ EEPROM_HW_PARAM_POINTER_ADDRESS, 2);
usHwParamData = ntohs(usHwParamData);
dwReadValue = usHwParamData;
} else {
@@ -352,12 +407,15 @@
if (Status != STATUS_SUCCESS)
return Status;
- BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);
+ BeceemNVMRead(Adapter, (PUINT)&dwReadValue,
+ EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);
dwReadValue = ntohl(dwReadValue);
}
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Start address of HW_PARAM structure = 0x%lx", dwReadValue);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread: Start address of HW_PARAM structure = 0x%lx",
+ dwReadValue);
/*
* Validate if the address read out is within the DSD.
@@ -413,12 +471,14 @@
}
}
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap);
return Status;
}
-static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread)
+static int ReadConfigFileStructure(PMINI_ADAPTER Adapter,
+ BOOLEAN *bEnableThread)
{
int Status = STATUS_SUCCESS;
/* Array to store GPIO numbers from EEPROM */
@@ -430,7 +490,8 @@
memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1);
if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) {
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n");
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "Target Params not Avail.\n");
return -ENOENT;
}
@@ -449,7 +510,8 @@
* CONFIG file read successfully. Deallocate the memory of
* uiFileNameBufferSize
*/
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Config file read successfully\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
+ "LED Thread: Config file read successfully\n");
puCFGData = (PUCHAR) &Adapter->pstargetparams->HostDrvrConfig1;
/*
@@ -473,9 +535,11 @@
Adapter->LEDInfo.LEDState[uiIndex].LED_Type = bData;
if (bData <= NUM_OF_LEDS)
- Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = GPIO_Array[bData];
+ Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num =
+ GPIO_Array[bData];
else
- Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = DISABLE_GPIO_NUM;
+ Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num =
+ DISABLE_GPIO_NUM;
puCFGData++;
bData = *puCFGData;
@@ -522,20 +586,28 @@
UINT uiIndex = 0;
/* Set all LED GPIO Mode to output mode */
- if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0)
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n");
+ if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue,
+ sizeof(uiResetValue)) < 0)
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "LED Thread: RDM Failed\n");
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
+ DISABLE_GPIO_NUM)
uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
- TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex);
+ TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num,
+ uiIndex);
}
- if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0)
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: WRM Failed\n");
+ if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue,
+ sizeof(uiResetValue)) < 0)
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "LED Thread: WRM Failed\n");
Adapter->LEDInfo.bIdle_led_off = FALSE;
}
-static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex, LedEventInfo_t currdriverstate)
+static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx,
+ UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex,
+ LedEventInfo_t currdriverstate)
{
UINT uiIndex = 0;
@@ -547,8 +619,10 @@
if ((currdriverstate == NORMAL_OPERATION) ||
(currdriverstate == IDLEMODE_EXIT) ||
(currdriverstate == FW_DOWNLOAD)) {
- if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State &
+ currdriverstate) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num
+ != DISABLE_GPIO_NUM) {
if (*GPIO_num_tx == DISABLE_GPIO_NUM) {
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
*uiLedTxIndex = uiIndex;
@@ -559,8 +633,10 @@
}
}
} else {
- if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State
+ & currdriverstate) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num
+ != DISABLE_GPIO_NUM) {
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
*uiLedTxIndex = uiIndex;
}
@@ -604,12 +680,17 @@
(currdriverstate != LOWPOWER_MODE_ENTER))
||
(currdriverstate == LED_THREAD_INACTIVE))
- Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event,
- currdriverstate != Adapter->DriverState || kthread_should_stop());
+ Status = wait_event_interruptible(
+ Adapter->LEDInfo.notify_led_event,
+ currdriverstate != Adapter->DriverState
+ || kthread_should_stop());
if (kthread_should_stop() || Adapter->device_removed) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "Led thread got signal to exit..hence exiting");
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
return; /* STATUS_FAILURE; */
}
@@ -626,7 +707,8 @@
case DRIVER_INIT:
currdriverstate = DRIVER_INIT;
/* Adapter->DriverState; */
- BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
+ &uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
@@ -639,16 +721,19 @@
* "LED Thread: FW_DN_DONE called\n");
*/
currdriverstate = FW_DOWNLOAD;
- BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
+ &uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM) {
timeout = 50;
- LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, timeout, -1, currdriverstate);
+ LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex,
+ timeout, -1, currdriverstate);
}
break;
case FW_DOWNLOAD_DONE:
currdriverstate = FW_DOWNLOAD_DONE;
- BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
+ &uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
break;
@@ -660,7 +745,8 @@
*/
case NO_NETWORK_ENTRY:
currdriverstate = NO_NETWORK_ENTRY;
- BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyGPIONum, currdriverstate);
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
+ &uiLedIndex, &dummyGPIONum, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
break;
@@ -673,8 +759,12 @@
currdriverstate = NORMAL_OPERATION;
Adapter->LEDInfo.bIdle_led_off = FALSE;
- BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate);
- if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) {
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx,
+ &GPIO_num_rx, &uiLEDTx, &uiLEDRx,
+ currdriverstate);
+ if ((GPIO_num_tx == DISABLE_GPIO_NUM) &&
+ (GPIO_num_rx ==
+ DISABLE_GPIO_NUM)) {
GPIO_num = DISABLE_GPIO_NUM;
} else {
/*
@@ -684,7 +774,8 @@
if (GPIO_num_tx == DISABLE_GPIO_NUM) {
GPIO_num_tx = GPIO_num_rx;
uiLEDTx = uiLEDRx;
- } else if (GPIO_num_rx == DISABLE_GPIO_NUM) {
+ } else if (GPIO_num_rx ==
+ DISABLE_GPIO_NUM) {
GPIO_num_rx = GPIO_num_tx;
uiLEDRx = uiLEDTx;
}
@@ -692,13 +783,17 @@
* Blink the LED in proportionate
* to Tx and Rx transmissions.
*/
- LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate);
+ LED_Proportional_Blink(Adapter,
+ GPIO_num_tx, uiLEDTx,
+ GPIO_num_rx, uiLEDRx,
+ currdriverstate);
}
}
break;
case LOWPOWER_MODE_ENTER:
currdriverstate = LOWPOWER_MODE_ENTER;
- if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) {
+ if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING ==
+ Adapter->ulPowerSaveMode) {
/* Turn OFF all the LED */
uiResetValue = 0;
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
@@ -723,32 +818,36 @@
currdriverstate = DRIVER_HALT;
GPIO_num = DISABLE_GPIO_NUM;
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
- DISABLE_GPIO_NUM)
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num
+ != DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
}
/* Adapter->DriverState = DRIVER_INIT; */
break;
case LED_THREAD_INACTIVE:
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "InActivating LED thread...");
currdriverstate = LED_THREAD_INACTIVE;
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY;
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_RUNNING_INACTIVELY;
Adapter->LEDInfo.bLedInitDone = FALSE;
/* disable ALL LED */
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
- DISABLE_GPIO_NUM)
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num
+ != DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
}
break;
case LED_THREAD_ACTIVE:
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again...");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "Activating LED thread again...");
if (Adapter->LinkUpStatus == FALSE)
Adapter->DriverState = NO_NETWORK_ENTRY;
else
Adapter->DriverState = NORMAL_OPERATION;
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY;
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_RUNNING_ACTIVELY;
break;
/* return; */
default:
@@ -778,7 +877,9 @@
*/
Status = ReadConfigFileStructure(Adapter, &bEnableThread);
if (STATUS_SUCCESS != Status) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "LED Thread: FAILED in ReadConfigFileStructure\n");
return Status;
}
@@ -788,20 +889,26 @@
} else {
Adapter->DriverState = DRIVER_HALT;
wake_up(&Adapter->LEDInfo.notify_led_event);
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_DISABLED;
}
} else if (bEnableThread) {
/* Create secondary thread to handle the LEDs */
init_waitqueue_head(&Adapter->LEDInfo.notify_led_event);
init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent);
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY;
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_RUNNING_ACTIVELY;
Adapter->LEDInfo.bIdle_led_off = FALSE;
- Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *))
- LEDControlThread, Adapter, "led_control_thread");
+ Adapter->LEDInfo.led_cntrl_threadid =
+ kthread_run((int (*)(void *)) LEDControlThread,
+ Adapter, "led_control_thread");
if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n");
- Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL,
+ "Not able to spawn Kernel Thread\n");
+ Adapter->LEDInfo.led_thread_running =
+ BCM_LED_THREAD_DISABLED;
return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid);
}
}