ASoC: Use DAPM supply widget for WM8903 charge pump
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index c539184..a3a489d 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -217,7 +217,6 @@
int sysclk;
/* Reference counts */
- int charge_pump_users;
int class_w_users;
int playback_active;
int capture_active;
@@ -373,6 +372,15 @@
#define WM8903_OUTPUT_INT 0x2
#define WM8903_OUTPUT_IN 0x1
+static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ WARN_ON(event != SND_SOC_DAPM_POST_PMU);
+ mdelay(4);
+
+ return 0;
+}
+
/*
* Event for headphone and line out amplifier power changes. Special
* power up/down sequences are required in order to maximise pop/click
@@ -382,12 +390,9 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
- struct i2c_client *i2c = codec->control_data;
u16 val;
u16 reg;
int shift;
- u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
switch (w->reg) {
case WM8903_POWER_MANAGEMENT_2:
@@ -419,18 +424,6 @@
/* Short the output */
val &= ~(WM8903_OUTPUT_SHORT << shift);
wm8903_write(codec, reg, val);
-
- wm8903->charge_pump_users++;
-
- dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
- wm8903->charge_pump_users);
-
- if (wm8903->charge_pump_users == 1) {
- dev_dbg(&i2c->dev, "Enabling charge pump\n");
- wm8903_write(codec, WM8903_CHARGE_PUMP_0,
- cp_reg | WM8903_CP_ENA);
- mdelay(4);
- }
}
if (event & SND_SOC_DAPM_POST_PMU) {
@@ -464,19 +457,6 @@
wm8903_write(codec, reg, val);
}
- if (event & SND_SOC_DAPM_POST_PMD) {
- wm8903->charge_pump_users--;
-
- dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
- wm8903->charge_pump_users);
-
- if (wm8903->charge_pump_users == 0) {
- dev_dbg(&i2c->dev, "Disabling charge pump\n");
- wm8903_write(codec, WM8903_CHARGE_PUMP_0,
- cp_reg & ~WM8903_CP_ENA);
- }
- }
-
return 0;
}
@@ -844,26 +824,28 @@
SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
1, 0, NULL, 0, wm8903_output_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
- SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
0, 0, NULL, 0, wm8903_output_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
- SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
NULL, 0, wm8903_output_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
- SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
NULL, 0, wm8903_output_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
- SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
NULL, 0),
+SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
+ wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
};
static const struct snd_soc_dapm_route intercon[] = {
@@ -951,6 +933,11 @@
{ "ROP", NULL, "Right Speaker PGA" },
{ "RON", NULL, "Right Speaker PGA" },
+
+ { "Left Headphone Output PGA", NULL, "Charge Pump" },
+ { "Right Headphone Output PGA", NULL, "Charge Pump" },
+ { "Left Line Output PGA", NULL, "Charge Pump" },
+ { "Right Line Output PGA", NULL, "Charge Pump" },
};
static int wm8903_add_widgets(struct snd_soc_codec *codec)