| /* |
| * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. |
| * All rights reserved. |
| * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/poll.h> |
| #include <linux/cdev.h> |
| #include <linux/swap.h> |
| #include <linux/vmalloc.h> |
| #include <linux/highmem.h> |
| #include <linux/io.h> |
| #include <linux/uio.h> |
| #include <linux/jiffies.h> |
| #include <asm/pgtable.h> |
| #include <linux/delay.h> |
| |
| #include "qib.h" |
| #include "qib_common.h" |
| #include "qib_user_sdma.h" |
| |
| static int qib_open(struct inode *, struct file *); |
| static int qib_close(struct inode *, struct file *); |
| static ssize_t qib_write(struct file *, const char __user *, size_t, loff_t *); |
| static ssize_t qib_aio_write(struct kiocb *, const struct iovec *, |
| unsigned long, loff_t); |
| static unsigned int qib_poll(struct file *, struct poll_table_struct *); |
| static int qib_mmapf(struct file *, struct vm_area_struct *); |
| |
| static const struct file_operations qib_file_ops = { |
| .owner = THIS_MODULE, |
| .write = qib_write, |
| .aio_write = qib_aio_write, |
| .open = qib_open, |
| .release = qib_close, |
| .poll = qib_poll, |
| .mmap = qib_mmapf, |
| .llseek = noop_llseek, |
| }; |
| |
| /* |
| * Convert kernel virtual addresses to physical addresses so they don't |
| * potentially conflict with the chip addresses used as mmap offsets. |
| * It doesn't really matter what mmap offset we use as long as we can |
| * interpret it correctly. |
| */ |
| static u64 cvt_kvaddr(void *p) |
| { |
| struct page *page; |
| u64 paddr = 0; |
| |
| page = vmalloc_to_page(p); |
| if (page) |
| paddr = page_to_pfn(page) << PAGE_SHIFT; |
| |
| return paddr; |
| } |
| |
| static int qib_get_base_info(struct file *fp, void __user *ubase, |
| size_t ubase_size) |
| { |
| struct qib_ctxtdata *rcd = ctxt_fp(fp); |
| int ret = 0; |
| struct qib_base_info *kinfo = NULL; |
| struct qib_devdata *dd = rcd->dd; |
| struct qib_pportdata *ppd = rcd->ppd; |
| unsigned subctxt_cnt; |
| int shared, master; |
| size_t sz; |
| |
| subctxt_cnt = rcd->subctxt_cnt; |
| if (!subctxt_cnt) { |
| shared = 0; |
| master = 0; |
| subctxt_cnt = 1; |
| } else { |
| shared = 1; |
| master = !subctxt_fp(fp); |
| } |
| |
| sz = sizeof(*kinfo); |
| /* If context sharing is not requested, allow the old size structure */ |
| if (!shared) |
| sz -= 7 * sizeof(u64); |
| if (ubase_size < sz) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL); |
| if (kinfo == NULL) { |
| ret = -ENOMEM; |
| goto bail; |
| } |
| |
| ret = dd->f_get_base_info(rcd, kinfo); |
| if (ret < 0) |
| goto bail; |
| |
| kinfo->spi_rcvhdr_cnt = dd->rcvhdrcnt; |
| kinfo->spi_rcvhdrent_size = dd->rcvhdrentsize; |
| kinfo->spi_tidegrcnt = rcd->rcvegrcnt; |
| kinfo->spi_rcv_egrbufsize = dd->rcvegrbufsize; |
| /* |
| * have to mmap whole thing |
| */ |
| kinfo->spi_rcv_egrbuftotlen = |
| rcd->rcvegrbuf_chunks * rcd->rcvegrbuf_size; |
| kinfo->spi_rcv_egrperchunk = rcd->rcvegrbufs_perchunk; |
| kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen / |
| rcd->rcvegrbuf_chunks; |
| kinfo->spi_tidcnt = dd->rcvtidcnt / subctxt_cnt; |
| if (master) |
| kinfo->spi_tidcnt += dd->rcvtidcnt % subctxt_cnt; |
| /* |
| * for this use, may be cfgctxts summed over all chips that |
| * are are configured and present |
| */ |
| kinfo->spi_nctxts = dd->cfgctxts; |
| /* unit (chip/board) our context is on */ |
| kinfo->spi_unit = dd->unit; |
| kinfo->spi_port = ppd->port; |
| /* for now, only a single page */ |
| kinfo->spi_tid_maxsize = PAGE_SIZE; |
| |
| /* |
| * Doing this per context, and based on the skip value, etc. This has |
| * to be the actual buffer size, since the protocol code treats it |
| * as an array. |
| * |
| * These have to be set to user addresses in the user code via mmap. |
| * These values are used on return to user code for the mmap target |
| * addresses only. For 32 bit, same 44 bit address problem, so use |
| * the physical address, not virtual. Before 2.6.11, using the |
| * page_address() macro worked, but in 2.6.11, even that returns the |
| * full 64 bit address (upper bits all 1's). So far, using the |
| * physical addresses (or chip offsets, for chip mapping) works, but |
| * no doubt some future kernel release will change that, and we'll be |
| * on to yet another method of dealing with this. |
| * Normally only one of rcvhdr_tailaddr or rhf_offset is useful |
| * since the chips with non-zero rhf_offset don't normally |
| * enable tail register updates to host memory, but for testing, |
| * both can be enabled and used. |
| */ |
| kinfo->spi_rcvhdr_base = (u64) rcd->rcvhdrq_phys; |
| kinfo->spi_rcvhdr_tailaddr = (u64) rcd->rcvhdrqtailaddr_phys; |
| kinfo->spi_rhf_offset = dd->rhf_offset; |
| kinfo->spi_rcv_egrbufs = (u64) rcd->rcvegr_phys; |
| kinfo->spi_pioavailaddr = (u64) dd->pioavailregs_phys; |
| /* setup per-unit (not port) status area for user programs */ |
| kinfo->spi_status = (u64) kinfo->spi_pioavailaddr + |
| (char *) ppd->statusp - |
| (char *) dd->pioavailregs_dma; |
| kinfo->spi_uregbase = (u64) dd->uregbase + dd->ureg_align * rcd->ctxt; |
| if (!shared) { |
| kinfo->spi_piocnt = rcd->piocnt; |
| kinfo->spi_piobufbase = (u64) rcd->piobufs; |
| kinfo->spi_sendbuf_status = cvt_kvaddr(rcd->user_event_mask); |
| } else if (master) { |
| kinfo->spi_piocnt = (rcd->piocnt / subctxt_cnt) + |
| (rcd->piocnt % subctxt_cnt); |
| /* Master's PIO buffers are after all the slave's */ |
| kinfo->spi_piobufbase = (u64) rcd->piobufs + |
| dd->palign * |
| (rcd->piocnt - kinfo->spi_piocnt); |
| } else { |
| unsigned slave = subctxt_fp(fp) - 1; |
| |
| kinfo->spi_piocnt = rcd->piocnt / subctxt_cnt; |
| kinfo->spi_piobufbase = (u64) rcd->piobufs + |
| dd->palign * kinfo->spi_piocnt * slave; |
| } |
| |
| if (shared) { |
| kinfo->spi_sendbuf_status = |
| cvt_kvaddr(&rcd->user_event_mask[subctxt_fp(fp)]); |
| /* only spi_subctxt_* fields should be set in this block! */ |
| kinfo->spi_subctxt_uregbase = cvt_kvaddr(rcd->subctxt_uregbase); |
| |
| kinfo->spi_subctxt_rcvegrbuf = |
| cvt_kvaddr(rcd->subctxt_rcvegrbuf); |
| kinfo->spi_subctxt_rcvhdr_base = |
| cvt_kvaddr(rcd->subctxt_rcvhdr_base); |
| } |
| |
| /* |
| * All user buffers are 2KB buffers. If we ever support |
| * giving 4KB buffers to user processes, this will need some |
| * work. Can't use piobufbase directly, because it has |
| * both 2K and 4K buffer base values. |
| */ |
| kinfo->spi_pioindex = (kinfo->spi_piobufbase - dd->pio2k_bufbase) / |
| dd->palign; |
| kinfo->spi_pioalign = dd->palign; |
| kinfo->spi_qpair = QIB_KD_QP; |
| /* |
| * user mode PIO buffers are always 2KB, even when 4KB can |
| * be received, and sent via the kernel; this is ibmaxlen |
| * for 2K MTU. |
| */ |
| kinfo->spi_piosize = dd->piosize2k - 2 * sizeof(u32); |
| kinfo->spi_mtu = ppd->ibmaxlen; /* maxlen, not ibmtu */ |
| kinfo->spi_ctxt = rcd->ctxt; |
| kinfo->spi_subctxt = subctxt_fp(fp); |
| kinfo->spi_sw_version = QIB_KERN_SWVERSION; |
| kinfo->spi_sw_version |= 1U << 31; /* QLogic-built, not kernel.org */ |
| kinfo->spi_hw_version = dd->revision; |
| |
| if (master) |
| kinfo->spi_runtime_flags |= QIB_RUNTIME_MASTER; |
| |
| sz = (ubase_size < sizeof(*kinfo)) ? ubase_size : sizeof(*kinfo); |
| if (copy_to_user(ubase, kinfo, sz)) |
| ret = -EFAULT; |
| bail: |
| kfree(kinfo); |
| return ret; |
| } |
| |
| /** |
| * qib_tid_update - update a context TID |
| * @rcd: the context |
| * @fp: the qib device file |
| * @ti: the TID information |
| * |
| * The new implementation as of Oct 2004 is that the driver assigns |
| * the tid and returns it to the caller. To reduce search time, we |
| * keep a cursor for each context, walking the shadow tid array to find |
| * one that's not in use. |
| * |
| * For now, if we can't allocate the full list, we fail, although |
| * in the long run, we'll allocate as many as we can, and the |
| * caller will deal with that by trying the remaining pages later. |
| * That means that when we fail, we have to mark the tids as not in |
| * use again, in our shadow copy. |
| * |
| * It's up to the caller to free the tids when they are done. |
| * We'll unlock the pages as they free them. |
| * |
| * Also, right now we are locking one page at a time, but since |
| * the intended use of this routine is for a single group of |
| * virtually contiguous pages, that should change to improve |
| * performance. |
| */ |
| static int qib_tid_update(struct qib_ctxtdata *rcd, struct file *fp, |
| const struct qib_tid_info *ti) |
| { |
| int ret = 0, ntids; |
| u32 tid, ctxttid, cnt, i, tidcnt, tidoff; |
| u16 *tidlist; |
| struct qib_devdata *dd = rcd->dd; |
| u64 physaddr; |
| unsigned long vaddr; |
| u64 __iomem *tidbase; |
| unsigned long tidmap[8]; |
| struct page **pagep = NULL; |
| unsigned subctxt = subctxt_fp(fp); |
| |
| if (!dd->pageshadow) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| cnt = ti->tidcnt; |
| if (!cnt) { |
| ret = -EFAULT; |
| goto done; |
| } |
| ctxttid = rcd->ctxt * dd->rcvtidcnt; |
| if (!rcd->subctxt_cnt) { |
| tidcnt = dd->rcvtidcnt; |
| tid = rcd->tidcursor; |
| tidoff = 0; |
| } else if (!subctxt) { |
| tidcnt = (dd->rcvtidcnt / rcd->subctxt_cnt) + |
| (dd->rcvtidcnt % rcd->subctxt_cnt); |
| tidoff = dd->rcvtidcnt - tidcnt; |
| ctxttid += tidoff; |
| tid = tidcursor_fp(fp); |
| } else { |
| tidcnt = dd->rcvtidcnt / rcd->subctxt_cnt; |
| tidoff = tidcnt * (subctxt - 1); |
| ctxttid += tidoff; |
| tid = tidcursor_fp(fp); |
| } |
| if (cnt > tidcnt) { |
| /* make sure it all fits in tid_pg_list */ |
| qib_devinfo(dd->pcidev, "Process tried to allocate %u " |
| "TIDs, only trying max (%u)\n", cnt, tidcnt); |
| cnt = tidcnt; |
| } |
| pagep = (struct page **) rcd->tid_pg_list; |
| tidlist = (u16 *) &pagep[dd->rcvtidcnt]; |
| pagep += tidoff; |
| tidlist += tidoff; |
| |
| memset(tidmap, 0, sizeof(tidmap)); |
| /* before decrement; chip actual # */ |
| ntids = tidcnt; |
| tidbase = (u64 __iomem *) (((char __iomem *) dd->kregbase) + |
| dd->rcvtidbase + |
| ctxttid * sizeof(*tidbase)); |
| |
| /* virtual address of first page in transfer */ |
| vaddr = ti->tidvaddr; |
| if (!access_ok(VERIFY_WRITE, (void __user *) vaddr, |
| cnt * PAGE_SIZE)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| ret = qib_get_user_pages(vaddr, cnt, pagep); |
| if (ret) { |
| /* |
| * if (ret == -EBUSY) |
| * We can't continue because the pagep array won't be |
| * initialized. This should never happen, |
| * unless perhaps the user has mpin'ed the pages |
| * themselves. |
| */ |
| qib_devinfo(dd->pcidev, |
| "Failed to lock addr %p, %u pages: " |
| "errno %d\n", (void *) vaddr, cnt, -ret); |
| goto done; |
| } |
| for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) { |
| for (; ntids--; tid++) { |
| if (tid == tidcnt) |
| tid = 0; |
| if (!dd->pageshadow[ctxttid + tid]) |
| break; |
| } |
| if (ntids < 0) { |
| /* |
| * Oops, wrapped all the way through their TIDs, |
| * and didn't have enough free; see comments at |
| * start of routine |
| */ |
| i--; /* last tidlist[i] not filled in */ |
| ret = -ENOMEM; |
| break; |
| } |
| tidlist[i] = tid + tidoff; |
| /* we "know" system pages and TID pages are same size */ |
| dd->pageshadow[ctxttid + tid] = pagep[i]; |
| dd->physshadow[ctxttid + tid] = |
| qib_map_page(dd->pcidev, pagep[i], 0, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| /* |
| * don't need atomic or it's overhead |
| */ |
| __set_bit(tid, tidmap); |
| physaddr = dd->physshadow[ctxttid + tid]; |
| /* PERFORMANCE: below should almost certainly be cached */ |
| dd->f_put_tid(dd, &tidbase[tid], |
| RCVHQ_RCV_TYPE_EXPECTED, physaddr); |
| /* |
| * don't check this tid in qib_ctxtshadow, since we |
| * just filled it in; start with the next one. |
| */ |
| tid++; |
| } |
| |
| if (ret) { |
| u32 limit; |
| cleanup: |
| /* jump here if copy out of updated info failed... */ |
| /* same code that's in qib_free_tid() */ |
| limit = sizeof(tidmap) * BITS_PER_BYTE; |
| if (limit > tidcnt) |
| /* just in case size changes in future */ |
| limit = tidcnt; |
| tid = find_first_bit((const unsigned long *)tidmap, limit); |
| for (; tid < limit; tid++) { |
| if (!test_bit(tid, tidmap)) |
| continue; |
| if (dd->pageshadow[ctxttid + tid]) { |
| dma_addr_t phys; |
| |
| phys = dd->physshadow[ctxttid + tid]; |
| dd->physshadow[ctxttid + tid] = dd->tidinvalid; |
| /* PERFORMANCE: below should almost certainly |
| * be cached |
| */ |
| dd->f_put_tid(dd, &tidbase[tid], |
| RCVHQ_RCV_TYPE_EXPECTED, |
| dd->tidinvalid); |
| pci_unmap_page(dd->pcidev, phys, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| dd->pageshadow[ctxttid + tid] = NULL; |
| } |
| } |
| qib_release_user_pages(pagep, cnt); |
| } else { |
| /* |
| * Copy the updated array, with qib_tid's filled in, back |
| * to user. Since we did the copy in already, this "should |
| * never fail" If it does, we have to clean up... |
| */ |
| if (copy_to_user((void __user *) |
| (unsigned long) ti->tidlist, |
| tidlist, cnt * sizeof(*tidlist))) { |
| ret = -EFAULT; |
| goto cleanup; |
| } |
| if (copy_to_user((void __user *) (unsigned long) ti->tidmap, |
| tidmap, sizeof tidmap)) { |
| ret = -EFAULT; |
| goto cleanup; |
| } |
| if (tid == tidcnt) |
| tid = 0; |
| if (!rcd->subctxt_cnt) |
| rcd->tidcursor = tid; |
| else |
| tidcursor_fp(fp) = tid; |
| } |
| |
| done: |
| return ret; |
| } |
| |
| /** |
| * qib_tid_free - free a context TID |
| * @rcd: the context |
| * @subctxt: the subcontext |
| * @ti: the TID info |
| * |
| * right now we are unlocking one page at a time, but since |
| * the intended use of this routine is for a single group of |
| * virtually contiguous pages, that should change to improve |
| * performance. We check that the TID is in range for this context |
| * but otherwise don't check validity; if user has an error and |
| * frees the wrong tid, it's only their own data that can thereby |
| * be corrupted. We do check that the TID was in use, for sanity |
| * We always use our idea of the saved address, not the address that |
| * they pass in to us. |
| */ |
| static int qib_tid_free(struct qib_ctxtdata *rcd, unsigned subctxt, |
| const struct qib_tid_info *ti) |
| { |
| int ret = 0; |
| u32 tid, ctxttid, cnt, limit, tidcnt; |
| struct qib_devdata *dd = rcd->dd; |
| u64 __iomem *tidbase; |
| unsigned long tidmap[8]; |
| |
| if (!dd->pageshadow) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap, |
| sizeof tidmap)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| ctxttid = rcd->ctxt * dd->rcvtidcnt; |
| if (!rcd->subctxt_cnt) |
| tidcnt = dd->rcvtidcnt; |
| else if (!subctxt) { |
| tidcnt = (dd->rcvtidcnt / rcd->subctxt_cnt) + |
| (dd->rcvtidcnt % rcd->subctxt_cnt); |
| ctxttid += dd->rcvtidcnt - tidcnt; |
| } else { |
| tidcnt = dd->rcvtidcnt / rcd->subctxt_cnt; |
| ctxttid += tidcnt * (subctxt - 1); |
| } |
| tidbase = (u64 __iomem *) ((char __iomem *)(dd->kregbase) + |
| dd->rcvtidbase + |
| ctxttid * sizeof(*tidbase)); |
| |
| limit = sizeof(tidmap) * BITS_PER_BYTE; |
| if (limit > tidcnt) |
| /* just in case size changes in future */ |
| limit = tidcnt; |
| tid = find_first_bit(tidmap, limit); |
| for (cnt = 0; tid < limit; tid++) { |
| /* |
| * small optimization; if we detect a run of 3 or so without |
| * any set, use find_first_bit again. That's mainly to |
| * accelerate the case where we wrapped, so we have some at |
| * the beginning, and some at the end, and a big gap |
| * in the middle. |
| */ |
| if (!test_bit(tid, tidmap)) |
| continue; |
| cnt++; |
| if (dd->pageshadow[ctxttid + tid]) { |
| struct page *p; |
| dma_addr_t phys; |
| |
| p = dd->pageshadow[ctxttid + tid]; |
| dd->pageshadow[ctxttid + tid] = NULL; |
| phys = dd->physshadow[ctxttid + tid]; |
| dd->physshadow[ctxttid + tid] = dd->tidinvalid; |
| /* PERFORMANCE: below should almost certainly be |
| * cached |
| */ |
| dd->f_put_tid(dd, &tidbase[tid], |
| RCVHQ_RCV_TYPE_EXPECTED, dd->tidinvalid); |
| pci_unmap_page(dd->pcidev, phys, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| qib_release_user_pages(&p, 1); |
| } |
| } |
| done: |
| return ret; |
| } |
| |
| /** |
| * qib_set_part_key - set a partition key |
| * @rcd: the context |
| * @key: the key |
| * |
| * We can have up to 4 active at a time (other than the default, which is |
| * always allowed). This is somewhat tricky, since multiple contexts may set |
| * the same key, so we reference count them, and clean up at exit. All 4 |
| * partition keys are packed into a single qlogic_ib register. It's an |
| * error for a process to set the same pkey multiple times. We provide no |
| * mechanism to de-allocate a pkey at this time, we may eventually need to |
| * do that. I've used the atomic operations, and no locking, and only make |
| * a single pass through what's available. This should be more than |
| * adequate for some time. I'll think about spinlocks or the like if and as |
| * it's necessary. |
| */ |
| static int qib_set_part_key(struct qib_ctxtdata *rcd, u16 key) |
| { |
| struct qib_pportdata *ppd = rcd->ppd; |
| int i, any = 0, pidx = -1; |
| u16 lkey = key & 0x7FFF; |
| int ret; |
| |
| if (lkey == (QIB_DEFAULT_P_KEY & 0x7FFF)) { |
| /* nothing to do; this key always valid */ |
| ret = 0; |
| goto bail; |
| } |
| |
| if (!lkey) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| /* |
| * Set the full membership bit, because it has to be |
| * set in the register or the packet, and it seems |
| * cleaner to set in the register than to force all |
| * callers to set it. |
| */ |
| key |= 0x8000; |
| |
| for (i = 0; i < ARRAY_SIZE(rcd->pkeys); i++) { |
| if (!rcd->pkeys[i] && pidx == -1) |
| pidx = i; |
| if (rcd->pkeys[i] == key) { |
| ret = -EEXIST; |
| goto bail; |
| } |
| } |
| if (pidx == -1) { |
| ret = -EBUSY; |
| goto bail; |
| } |
| for (any = i = 0; i < ARRAY_SIZE(ppd->pkeys); i++) { |
| if (!ppd->pkeys[i]) { |
| any++; |
| continue; |
| } |
| if (ppd->pkeys[i] == key) { |
| atomic_t *pkrefs = &ppd->pkeyrefs[i]; |
| |
| if (atomic_inc_return(pkrefs) > 1) { |
| rcd->pkeys[pidx] = key; |
| ret = 0; |
| goto bail; |
| } else { |
| /* |
| * lost race, decrement count, catch below |
| */ |
| atomic_dec(pkrefs); |
| any++; |
| } |
| } |
| if ((ppd->pkeys[i] & 0x7FFF) == lkey) { |
| /* |
| * It makes no sense to have both the limited and |
| * full membership PKEY set at the same time since |
| * the unlimited one will disable the limited one. |
| */ |
| ret = -EEXIST; |
| goto bail; |
| } |
| } |
| if (!any) { |
| ret = -EBUSY; |
| goto bail; |
| } |
| for (any = i = 0; i < ARRAY_SIZE(ppd->pkeys); i++) { |
| if (!ppd->pkeys[i] && |
| atomic_inc_return(&ppd->pkeyrefs[i]) == 1) { |
| rcd->pkeys[pidx] = key; |
| ppd->pkeys[i] = key; |
| (void) ppd->dd->f_set_ib_cfg(ppd, QIB_IB_CFG_PKEYS, 0); |
| ret = 0; |
| goto bail; |
| } |
| } |
| ret = -EBUSY; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * qib_manage_rcvq - manage a context's receive queue |
| * @rcd: the context |
| * @subctxt: the subcontext |
| * @start_stop: action to carry out |
| * |
| * start_stop == 0 disables receive on the context, for use in queue |
| * overflow conditions. start_stop==1 re-enables, to be used to |
| * re-init the software copy of the head register |
| */ |
| static int qib_manage_rcvq(struct qib_ctxtdata *rcd, unsigned subctxt, |
| int start_stop) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned int rcvctrl_op; |
| |
| if (subctxt) |
| goto bail; |
| /* atomically clear receive enable ctxt. */ |
| if (start_stop) { |
| /* |
| * On enable, force in-memory copy of the tail register to |
| * 0, so that protocol code doesn't have to worry about |
| * whether or not the chip has yet updated the in-memory |
| * copy or not on return from the system call. The chip |
| * always resets it's tail register back to 0 on a |
| * transition from disabled to enabled. |
| */ |
| if (rcd->rcvhdrtail_kvaddr) |
| qib_clear_rcvhdrtail(rcd); |
| rcvctrl_op = QIB_RCVCTRL_CTXT_ENB; |
| } else |
| rcvctrl_op = QIB_RCVCTRL_CTXT_DIS; |
| dd->f_rcvctrl(rcd->ppd, rcvctrl_op, rcd->ctxt); |
| /* always; new head should be equal to new tail; see above */ |
| bail: |
| return 0; |
| } |
| |
| static void qib_clean_part_key(struct qib_ctxtdata *rcd, |
| struct qib_devdata *dd) |
| { |
| int i, j, pchanged = 0; |
| u64 oldpkey; |
| struct qib_pportdata *ppd = rcd->ppd; |
| |
| /* for debugging only */ |
| oldpkey = (u64) ppd->pkeys[0] | |
| ((u64) ppd->pkeys[1] << 16) | |
| ((u64) ppd->pkeys[2] << 32) | |
| ((u64) ppd->pkeys[3] << 48); |
| |
| for (i = 0; i < ARRAY_SIZE(rcd->pkeys); i++) { |
| if (!rcd->pkeys[i]) |
| continue; |
| for (j = 0; j < ARRAY_SIZE(ppd->pkeys); j++) { |
| /* check for match independent of the global bit */ |
| if ((ppd->pkeys[j] & 0x7fff) != |
| (rcd->pkeys[i] & 0x7fff)) |
| continue; |
| if (atomic_dec_and_test(&ppd->pkeyrefs[j])) { |
| ppd->pkeys[j] = 0; |
| pchanged++; |
| } |
| break; |
| } |
| rcd->pkeys[i] = 0; |
| } |
| if (pchanged) |
| (void) ppd->dd->f_set_ib_cfg(ppd, QIB_IB_CFG_PKEYS, 0); |
| } |
| |
| /* common code for the mappings on dma_alloc_coherent mem */ |
| static int qib_mmap_mem(struct vm_area_struct *vma, struct qib_ctxtdata *rcd, |
| unsigned len, void *kvaddr, u32 write_ok, char *what) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned long pfn; |
| int ret; |
| |
| if ((vma->vm_end - vma->vm_start) > len) { |
| qib_devinfo(dd->pcidev, |
| "FAIL on %s: len %lx > %x\n", what, |
| vma->vm_end - vma->vm_start, len); |
| ret = -EFAULT; |
| goto bail; |
| } |
| |
| /* |
| * shared context user code requires rcvhdrq mapped r/w, others |
| * only allowed readonly mapping. |
| */ |
| if (!write_ok) { |
| if (vma->vm_flags & VM_WRITE) { |
| qib_devinfo(dd->pcidev, |
| "%s must be mapped readonly\n", what); |
| ret = -EPERM; |
| goto bail; |
| } |
| |
| /* don't allow them to later change with mprotect */ |
| vma->vm_flags &= ~VM_MAYWRITE; |
| } |
| |
| pfn = virt_to_phys(kvaddr) >> PAGE_SHIFT; |
| ret = remap_pfn_range(vma, vma->vm_start, pfn, |
| len, vma->vm_page_prot); |
| if (ret) |
| qib_devinfo(dd->pcidev, "%s ctxt%u mmap of %lx, %x " |
| "bytes failed: %d\n", what, rcd->ctxt, |
| pfn, len, ret); |
| bail: |
| return ret; |
| } |
| |
| static int mmap_ureg(struct vm_area_struct *vma, struct qib_devdata *dd, |
| u64 ureg) |
| { |
| unsigned long phys; |
| unsigned long sz; |
| int ret; |
| |
| /* |
| * This is real hardware, so use io_remap. This is the mechanism |
| * for the user process to update the head registers for their ctxt |
| * in the chip. |
| */ |
| sz = dd->flags & QIB_HAS_HDRSUPP ? 2 * PAGE_SIZE : PAGE_SIZE; |
| if ((vma->vm_end - vma->vm_start) > sz) { |
| qib_devinfo(dd->pcidev, "FAIL mmap userreg: reqlen " |
| "%lx > PAGE\n", vma->vm_end - vma->vm_start); |
| ret = -EFAULT; |
| } else { |
| phys = dd->physaddr + ureg; |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| |
| vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; |
| ret = io_remap_pfn_range(vma, vma->vm_start, |
| phys >> PAGE_SHIFT, |
| vma->vm_end - vma->vm_start, |
| vma->vm_page_prot); |
| } |
| return ret; |
| } |
| |
| static int mmap_piobufs(struct vm_area_struct *vma, |
| struct qib_devdata *dd, |
| struct qib_ctxtdata *rcd, |
| unsigned piobufs, unsigned piocnt) |
| { |
| unsigned long phys; |
| int ret; |
| |
| /* |
| * When we map the PIO buffers in the chip, we want to map them as |
| * writeonly, no read possible; unfortunately, x86 doesn't allow |
| * for this in hardware, but we still prevent users from asking |
| * for it. |
| */ |
| if ((vma->vm_end - vma->vm_start) > (piocnt * dd->palign)) { |
| qib_devinfo(dd->pcidev, "FAIL mmap piobufs: " |
| "reqlen %lx > PAGE\n", |
| vma->vm_end - vma->vm_start); |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| phys = dd->physaddr + piobufs; |
| |
| #if defined(__powerpc__) |
| /* There isn't a generic way to specify writethrough mappings */ |
| pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE; |
| pgprot_val(vma->vm_page_prot) |= _PAGE_WRITETHRU; |
| pgprot_val(vma->vm_page_prot) &= ~_PAGE_GUARDED; |
| #endif |
| |
| /* |
| * don't allow them to later change to readable with mprotect (for when |
| * not initially mapped readable, as is normally the case) |
| */ |
| vma->vm_flags &= ~VM_MAYREAD; |
| vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; |
| |
| if (qib_wc_pat) |
| vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); |
| |
| ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT, |
| vma->vm_end - vma->vm_start, |
| vma->vm_page_prot); |
| bail: |
| return ret; |
| } |
| |
| static int mmap_rcvegrbufs(struct vm_area_struct *vma, |
| struct qib_ctxtdata *rcd) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned long start, size; |
| size_t total_size, i; |
| unsigned long pfn; |
| int ret; |
| |
| size = rcd->rcvegrbuf_size; |
| total_size = rcd->rcvegrbuf_chunks * size; |
| if ((vma->vm_end - vma->vm_start) > total_size) { |
| qib_devinfo(dd->pcidev, "FAIL on egr bufs: " |
| "reqlen %lx > actual %lx\n", |
| vma->vm_end - vma->vm_start, |
| (unsigned long) total_size); |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| if (vma->vm_flags & VM_WRITE) { |
| qib_devinfo(dd->pcidev, "Can't map eager buffers as " |
| "writable (flags=%lx)\n", vma->vm_flags); |
| ret = -EPERM; |
| goto bail; |
| } |
| /* don't allow them to later change to writeable with mprotect */ |
| vma->vm_flags &= ~VM_MAYWRITE; |
| |
| start = vma->vm_start; |
| |
| for (i = 0; i < rcd->rcvegrbuf_chunks; i++, start += size) { |
| pfn = virt_to_phys(rcd->rcvegrbuf[i]) >> PAGE_SHIFT; |
| ret = remap_pfn_range(vma, start, pfn, size, |
| vma->vm_page_prot); |
| if (ret < 0) |
| goto bail; |
| } |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /* |
| * qib_file_vma_fault - handle a VMA page fault. |
| */ |
| static int qib_file_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) |
| { |
| struct page *page; |
| |
| page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT)); |
| if (!page) |
| return VM_FAULT_SIGBUS; |
| |
| get_page(page); |
| vmf->page = page; |
| |
| return 0; |
| } |
| |
| static struct vm_operations_struct qib_file_vm_ops = { |
| .fault = qib_file_vma_fault, |
| }; |
| |
| static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr, |
| struct qib_ctxtdata *rcd, unsigned subctxt) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned subctxt_cnt; |
| unsigned long len; |
| void *addr; |
| size_t size; |
| int ret = 0; |
| |
| subctxt_cnt = rcd->subctxt_cnt; |
| size = rcd->rcvegrbuf_chunks * rcd->rcvegrbuf_size; |
| |
| /* |
| * Each process has all the subctxt uregbase, rcvhdrq, and |
| * rcvegrbufs mmapped - as an array for all the processes, |
| * and also separately for this process. |
| */ |
| if (pgaddr == cvt_kvaddr(rcd->subctxt_uregbase)) { |
| addr = rcd->subctxt_uregbase; |
| size = PAGE_SIZE * subctxt_cnt; |
| } else if (pgaddr == cvt_kvaddr(rcd->subctxt_rcvhdr_base)) { |
| addr = rcd->subctxt_rcvhdr_base; |
| size = rcd->rcvhdrq_size * subctxt_cnt; |
| } else if (pgaddr == cvt_kvaddr(rcd->subctxt_rcvegrbuf)) { |
| addr = rcd->subctxt_rcvegrbuf; |
| size *= subctxt_cnt; |
| } else if (pgaddr == cvt_kvaddr(rcd->subctxt_uregbase + |
| PAGE_SIZE * subctxt)) { |
| addr = rcd->subctxt_uregbase + PAGE_SIZE * subctxt; |
| size = PAGE_SIZE; |
| } else if (pgaddr == cvt_kvaddr(rcd->subctxt_rcvhdr_base + |
| rcd->rcvhdrq_size * subctxt)) { |
| addr = rcd->subctxt_rcvhdr_base + |
| rcd->rcvhdrq_size * subctxt; |
| size = rcd->rcvhdrq_size; |
| } else if (pgaddr == cvt_kvaddr(&rcd->user_event_mask[subctxt])) { |
| addr = rcd->user_event_mask; |
| size = PAGE_SIZE; |
| } else if (pgaddr == cvt_kvaddr(rcd->subctxt_rcvegrbuf + |
| size * subctxt)) { |
| addr = rcd->subctxt_rcvegrbuf + size * subctxt; |
| /* rcvegrbufs are read-only on the slave */ |
| if (vma->vm_flags & VM_WRITE) { |
| qib_devinfo(dd->pcidev, |
| "Can't map eager buffers as " |
| "writable (flags=%lx)\n", vma->vm_flags); |
| ret = -EPERM; |
| goto bail; |
| } |
| /* |
| * Don't allow permission to later change to writeable |
| * with mprotect. |
| */ |
| vma->vm_flags &= ~VM_MAYWRITE; |
| } else |
| goto bail; |
| len = vma->vm_end - vma->vm_start; |
| if (len > size) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT; |
| vma->vm_ops = &qib_file_vm_ops; |
| vma->vm_flags |= VM_RESERVED | VM_DONTEXPAND; |
| ret = 1; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * qib_mmapf - mmap various structures into user space |
| * @fp: the file pointer |
| * @vma: the VM area |
| * |
| * We use this to have a shared buffer between the kernel and the user code |
| * for the rcvhdr queue, egr buffers, and the per-context user regs and pio |
| * buffers in the chip. We have the open and close entries so we can bump |
| * the ref count and keep the driver from being unloaded while still mapped. |
| */ |
| static int qib_mmapf(struct file *fp, struct vm_area_struct *vma) |
| { |
| struct qib_ctxtdata *rcd; |
| struct qib_devdata *dd; |
| u64 pgaddr, ureg; |
| unsigned piobufs, piocnt; |
| int ret, match = 1; |
| |
| rcd = ctxt_fp(fp); |
| if (!rcd || !(vma->vm_flags & VM_SHARED)) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| dd = rcd->dd; |
| |
| /* |
| * This is the qib_do_user_init() code, mapping the shared buffers |
| * and per-context user registers into the user process. The address |
| * referred to by vm_pgoff is the file offset passed via mmap(). |
| * For shared contexts, this is the kernel vmalloc() address of the |
| * pages to share with the master. |
| * For non-shared or master ctxts, this is a physical address. |
| * We only do one mmap for each space mapped. |
| */ |
| pgaddr = vma->vm_pgoff << PAGE_SHIFT; |
| |
| /* |
| * Check for 0 in case one of the allocations failed, but user |
| * called mmap anyway. |
| */ |
| if (!pgaddr) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| /* |
| * Physical addresses must fit in 40 bits for our hardware. |
| * Check for kernel virtual addresses first, anything else must |
| * match a HW or memory address. |
| */ |
| ret = mmap_kvaddr(vma, pgaddr, rcd, subctxt_fp(fp)); |
| if (ret) { |
| if (ret > 0) |
| ret = 0; |
| goto bail; |
| } |
| |
| ureg = dd->uregbase + dd->ureg_align * rcd->ctxt; |
| if (!rcd->subctxt_cnt) { |
| /* ctxt is not shared */ |
| piocnt = rcd->piocnt; |
| piobufs = rcd->piobufs; |
| } else if (!subctxt_fp(fp)) { |
| /* caller is the master */ |
| piocnt = (rcd->piocnt / rcd->subctxt_cnt) + |
| (rcd->piocnt % rcd->subctxt_cnt); |
| piobufs = rcd->piobufs + |
| dd->palign * (rcd->piocnt - piocnt); |
| } else { |
| unsigned slave = subctxt_fp(fp) - 1; |
| |
| /* caller is a slave */ |
| piocnt = rcd->piocnt / rcd->subctxt_cnt; |
| piobufs = rcd->piobufs + dd->palign * piocnt * slave; |
| } |
| |
| if (pgaddr == ureg) |
| ret = mmap_ureg(vma, dd, ureg); |
| else if (pgaddr == piobufs) |
| ret = mmap_piobufs(vma, dd, rcd, piobufs, piocnt); |
| else if (pgaddr == dd->pioavailregs_phys) |
| /* in-memory copy of pioavail registers */ |
| ret = qib_mmap_mem(vma, rcd, PAGE_SIZE, |
| (void *) dd->pioavailregs_dma, 0, |
| "pioavail registers"); |
| else if (pgaddr == rcd->rcvegr_phys) |
| ret = mmap_rcvegrbufs(vma, rcd); |
| else if (pgaddr == (u64) rcd->rcvhdrq_phys) |
| /* |
| * The rcvhdrq itself; multiple pages, contiguous |
| * from an i/o perspective. Shared contexts need |
| * to map r/w, so we allow writing. |
| */ |
| ret = qib_mmap_mem(vma, rcd, rcd->rcvhdrq_size, |
| rcd->rcvhdrq, 1, "rcvhdrq"); |
| else if (pgaddr == (u64) rcd->rcvhdrqtailaddr_phys) |
| /* in-memory copy of rcvhdrq tail register */ |
| ret = qib_mmap_mem(vma, rcd, PAGE_SIZE, |
| rcd->rcvhdrtail_kvaddr, 0, |
| "rcvhdrq tail"); |
| else |
| match = 0; |
| if (!match) |
| ret = -EINVAL; |
| |
| vma->vm_private_data = NULL; |
| |
| if (ret < 0) |
| qib_devinfo(dd->pcidev, |
| "mmap Failure %d: off %llx len %lx\n", |
| -ret, (unsigned long long)pgaddr, |
| vma->vm_end - vma->vm_start); |
| bail: |
| return ret; |
| } |
| |
| static unsigned int qib_poll_urgent(struct qib_ctxtdata *rcd, |
| struct file *fp, |
| struct poll_table_struct *pt) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned pollflag; |
| |
| poll_wait(fp, &rcd->wait, pt); |
| |
| spin_lock_irq(&dd->uctxt_lock); |
| if (rcd->urgent != rcd->urgent_poll) { |
| pollflag = POLLIN | POLLRDNORM; |
| rcd->urgent_poll = rcd->urgent; |
| } else { |
| pollflag = 0; |
| set_bit(QIB_CTXT_WAITING_URG, &rcd->flag); |
| } |
| spin_unlock_irq(&dd->uctxt_lock); |
| |
| return pollflag; |
| } |
| |
| static unsigned int qib_poll_next(struct qib_ctxtdata *rcd, |
| struct file *fp, |
| struct poll_table_struct *pt) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| unsigned pollflag; |
| |
| poll_wait(fp, &rcd->wait, pt); |
| |
| spin_lock_irq(&dd->uctxt_lock); |
| if (dd->f_hdrqempty(rcd)) { |
| set_bit(QIB_CTXT_WAITING_RCV, &rcd->flag); |
| dd->f_rcvctrl(rcd->ppd, QIB_RCVCTRL_INTRAVAIL_ENB, rcd->ctxt); |
| pollflag = 0; |
| } else |
| pollflag = POLLIN | POLLRDNORM; |
| spin_unlock_irq(&dd->uctxt_lock); |
| |
| return pollflag; |
| } |
| |
| static unsigned int qib_poll(struct file *fp, struct poll_table_struct *pt) |
| { |
| struct qib_ctxtdata *rcd; |
| unsigned pollflag; |
| |
| rcd = ctxt_fp(fp); |
| if (!rcd) |
| pollflag = POLLERR; |
| else if (rcd->poll_type == QIB_POLL_TYPE_URGENT) |
| pollflag = qib_poll_urgent(rcd, fp, pt); |
| else if (rcd->poll_type == QIB_POLL_TYPE_ANYRCV) |
| pollflag = qib_poll_next(rcd, fp, pt); |
| else /* invalid */ |
| pollflag = POLLERR; |
| |
| return pollflag; |
| } |
| |
| /* |
| * Check that userland and driver are compatible for subcontexts. |
| */ |
| static int qib_compatible_subctxts(int user_swmajor, int user_swminor) |
| { |
| /* this code is written long-hand for clarity */ |
| if (QIB_USER_SWMAJOR != user_swmajor) { |
| /* no promise of compatibility if major mismatch */ |
| return 0; |
| } |
| if (QIB_USER_SWMAJOR == 1) { |
| switch (QIB_USER_SWMINOR) { |
| case 0: |
| case 1: |
| case 2: |
| /* no subctxt implementation so cannot be compatible */ |
| return 0; |
| case 3: |
| /* 3 is only compatible with itself */ |
| return user_swminor == 3; |
| default: |
| /* >= 4 are compatible (or are expected to be) */ |
| return user_swminor >= 4; |
| } |
| } |
| /* make no promises yet for future major versions */ |
| return 0; |
| } |
| |
| static int init_subctxts(struct qib_devdata *dd, |
| struct qib_ctxtdata *rcd, |
| const struct qib_user_info *uinfo) |
| { |
| int ret = 0; |
| unsigned num_subctxts; |
| size_t size; |
| |
| /* |
| * If the user is requesting zero subctxts, |
| * skip the subctxt allocation. |
| */ |
| if (uinfo->spu_subctxt_cnt <= 0) |
| goto bail; |
| num_subctxts = uinfo->spu_subctxt_cnt; |
| |
| /* Check for subctxt compatibility */ |
| if (!qib_compatible_subctxts(uinfo->spu_userversion >> 16, |
| uinfo->spu_userversion & 0xffff)) { |
| qib_devinfo(dd->pcidev, |
| "Mismatched user version (%d.%d) and driver " |
| "version (%d.%d) while context sharing. Ensure " |
| "that driver and library are from the same " |
| "release.\n", |
| (int) (uinfo->spu_userversion >> 16), |
| (int) (uinfo->spu_userversion & 0xffff), |
| QIB_USER_SWMAJOR, QIB_USER_SWMINOR); |
| goto bail; |
| } |
| if (num_subctxts > QLOGIC_IB_MAX_SUBCTXT) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| rcd->subctxt_uregbase = vmalloc_user(PAGE_SIZE * num_subctxts); |
| if (!rcd->subctxt_uregbase) { |
| ret = -ENOMEM; |
| goto bail; |
| } |
| /* Note: rcd->rcvhdrq_size isn't initialized yet. */ |
| size = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize * |
| sizeof(u32), PAGE_SIZE) * num_subctxts; |
| rcd->subctxt_rcvhdr_base = vmalloc_user(size); |
| if (!rcd->subctxt_rcvhdr_base) { |
| ret = -ENOMEM; |
| goto bail_ureg; |
| } |
| |
| rcd->subctxt_rcvegrbuf = vmalloc_user(rcd->rcvegrbuf_chunks * |
| rcd->rcvegrbuf_size * |
| num_subctxts); |
| if (!rcd->subctxt_rcvegrbuf) { |
| ret = -ENOMEM; |
| goto bail_rhdr; |
| } |
| |
| rcd->subctxt_cnt = uinfo->spu_subctxt_cnt; |
| rcd->subctxt_id = uinfo->spu_subctxt_id; |
| rcd->active_slaves = 1; |
| rcd->redirect_seq_cnt = 1; |
| set_bit(QIB_CTXT_MASTER_UNINIT, &rcd->flag); |
| goto bail; |
| |
| bail_rhdr: |
| vfree(rcd->subctxt_rcvhdr_base); |
| bail_ureg: |
| vfree(rcd->subctxt_uregbase); |
| rcd->subctxt_uregbase = NULL; |
| bail: |
| return ret; |
| } |
| |
| static int setup_ctxt(struct qib_pportdata *ppd, int ctxt, |
| struct file *fp, const struct qib_user_info *uinfo) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| struct qib_ctxtdata *rcd; |
| void *ptmp = NULL; |
| int ret; |
| |
| rcd = qib_create_ctxtdata(ppd, ctxt); |
| |
| /* |
| * Allocate memory for use in qib_tid_update() at open to |
| * reduce cost of expected send setup per message segment |
| */ |
| if (rcd) |
| ptmp = kmalloc(dd->rcvtidcnt * sizeof(u16) + |
| dd->rcvtidcnt * sizeof(struct page **), |
| GFP_KERNEL); |
| |
| if (!rcd || !ptmp) { |
| qib_dev_err(dd, "Unable to allocate ctxtdata " |
| "memory, failing open\n"); |
| ret = -ENOMEM; |
| goto bailerr; |
| } |
| rcd->userversion = uinfo->spu_userversion; |
| ret = init_subctxts(dd, rcd, uinfo); |
| if (ret) |
| goto bailerr; |
| rcd->tid_pg_list = ptmp; |
| rcd->pid = current->pid; |
| init_waitqueue_head(&dd->rcd[ctxt]->wait); |
| strlcpy(rcd->comm, current->comm, sizeof(rcd->comm)); |
| ctxt_fp(fp) = rcd; |
| qib_stats.sps_ctxts++; |
| ret = 0; |
| goto bail; |
| |
| bailerr: |
| dd->rcd[ctxt] = NULL; |
| kfree(rcd); |
| kfree(ptmp); |
| bail: |
| return ret; |
| } |
| |
| static inline int usable(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| |
| return dd && (dd->flags & QIB_PRESENT) && dd->kregbase && ppd->lid && |
| (ppd->lflags & QIBL_LINKACTIVE); |
| } |
| |
| /* |
| * Select a context on the given device, either using a requested port |
| * or the port based on the context number. |
| */ |
| static int choose_port_ctxt(struct file *fp, struct qib_devdata *dd, u32 port, |
| const struct qib_user_info *uinfo) |
| { |
| struct qib_pportdata *ppd = NULL; |
| int ret, ctxt; |
| |
| if (port) { |
| if (!usable(dd->pport + port - 1)) { |
| ret = -ENETDOWN; |
| goto done; |
| } else |
| ppd = dd->pport + port - 1; |
| } |
| for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts && dd->rcd[ctxt]; |
| ctxt++) |
| ; |
| if (ctxt == dd->cfgctxts) { |
| ret = -EBUSY; |
| goto done; |
| } |
| if (!ppd) { |
| u32 pidx = ctxt % dd->num_pports; |
| if (usable(dd->pport + pidx)) |
| ppd = dd->pport + pidx; |
| else { |
| for (pidx = 0; pidx < dd->num_pports && !ppd; |
| pidx++) |
| if (usable(dd->pport + pidx)) |
| ppd = dd->pport + pidx; |
| } |
| } |
| ret = ppd ? setup_ctxt(ppd, ctxt, fp, uinfo) : -ENETDOWN; |
| done: |
| return ret; |
| } |
| |
| static int find_free_ctxt(int unit, struct file *fp, |
| const struct qib_user_info *uinfo) |
| { |
| struct qib_devdata *dd = qib_lookup(unit); |
| int ret; |
| |
| if (!dd || (uinfo->spu_port && uinfo->spu_port > dd->num_pports)) |
| ret = -ENODEV; |
| else |
| ret = choose_port_ctxt(fp, dd, uinfo->spu_port, uinfo); |
| |
| return ret; |
| } |
| |
| static int get_a_ctxt(struct file *fp, const struct qib_user_info *uinfo, |
| unsigned alg) |
| { |
| struct qib_devdata *udd = NULL; |
| int ret = 0, devmax, npresent, nup, ndev, dusable = 0, i; |
| u32 port = uinfo->spu_port, ctxt; |
| |
| devmax = qib_count_units(&npresent, &nup); |
| if (!npresent) { |
| ret = -ENXIO; |
| goto done; |
| } |
| if (nup == 0) { |
| ret = -ENETDOWN; |
| goto done; |
| } |
| |
| if (alg == QIB_PORT_ALG_ACROSS) { |
| unsigned inuse = ~0U; |
| /* find device (with ACTIVE ports) with fewest ctxts in use */ |
| for (ndev = 0; ndev < devmax; ndev++) { |
| struct qib_devdata *dd = qib_lookup(ndev); |
| unsigned cused = 0, cfree = 0, pusable = 0; |
| if (!dd) |
| continue; |
| if (port && port <= dd->num_pports && |
| usable(dd->pport + port - 1)) |
| pusable = 1; |
| else |
| for (i = 0; i < dd->num_pports; i++) |
| if (usable(dd->pport + i)) |
| pusable++; |
| if (!pusable) |
| continue; |
| for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; |
| ctxt++) |
| if (dd->rcd[ctxt]) |
| cused++; |
| else |
| cfree++; |
| if (pusable && cfree && cused < inuse) { |
| udd = dd; |
| inuse = cused; |
| } |
| } |
| if (udd) { |
| ret = choose_port_ctxt(fp, udd, port, uinfo); |
| goto done; |
| } |
| } else { |
| for (ndev = 0; ndev < devmax; ndev++) { |
| struct qib_devdata *dd = qib_lookup(ndev); |
| if (dd) { |
| ret = choose_port_ctxt(fp, dd, port, uinfo); |
| if (!ret) |
| goto done; |
| if (ret == -EBUSY) |
| dusable++; |
| } |
| } |
| } |
| ret = dusable ? -EBUSY : -ENETDOWN; |
| |
| done: |
| return ret; |
| } |
| |
| static int find_shared_ctxt(struct file *fp, |
| const struct qib_user_info *uinfo) |
| { |
| int devmax, ndev, i; |
| int ret = 0; |
| |
| devmax = qib_count_units(NULL, NULL); |
| |
| for (ndev = 0; ndev < devmax; ndev++) { |
| struct qib_devdata *dd = qib_lookup(ndev); |
| |
| /* device portion of usable() */ |
| if (!(dd && (dd->flags & QIB_PRESENT) && dd->kregbase)) |
| continue; |
| for (i = dd->first_user_ctxt; i < dd->cfgctxts; i++) { |
| struct qib_ctxtdata *rcd = dd->rcd[i]; |
| |
| /* Skip ctxts which are not yet open */ |
| if (!rcd || !rcd->cnt) |
| continue; |
| /* Skip ctxt if it doesn't match the requested one */ |
| if (rcd->subctxt_id != uinfo->spu_subctxt_id) |
| continue; |
| /* Verify the sharing process matches the master */ |
| if (rcd->subctxt_cnt != uinfo->spu_subctxt_cnt || |
| rcd->userversion != uinfo->spu_userversion || |
| rcd->cnt >= rcd->subctxt_cnt) { |
| ret = -EINVAL; |
| goto done; |
| } |
| ctxt_fp(fp) = rcd; |
| subctxt_fp(fp) = rcd->cnt++; |
| rcd->subpid[subctxt_fp(fp)] = current->pid; |
| tidcursor_fp(fp) = 0; |
| rcd->active_slaves |= 1 << subctxt_fp(fp); |
| ret = 1; |
| goto done; |
| } |
| } |
| |
| done: |
| return ret; |
| } |
| |
| static int qib_open(struct inode *in, struct file *fp) |
| { |
| /* The real work is performed later in qib_assign_ctxt() */ |
| fp->private_data = kzalloc(sizeof(struct qib_filedata), GFP_KERNEL); |
| if (fp->private_data) /* no cpu affinity by default */ |
| ((struct qib_filedata *)fp->private_data)->rec_cpu_num = -1; |
| return fp->private_data ? 0 : -ENOMEM; |
| } |
| |
| /* |
| * Get ctxt early, so can set affinity prior to memory allocation. |
| */ |
| static int qib_assign_ctxt(struct file *fp, const struct qib_user_info *uinfo) |
| { |
| int ret; |
| int i_minor; |
| unsigned swmajor, swminor, alg = QIB_PORT_ALG_ACROSS; |
| |
| /* Check to be sure we haven't already initialized this file */ |
| if (ctxt_fp(fp)) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| /* for now, if major version is different, bail */ |
| swmajor = uinfo->spu_userversion >> 16; |
| if (swmajor != QIB_USER_SWMAJOR) { |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| swminor = uinfo->spu_userversion & 0xffff; |
| |
| if (swminor >= 11 && uinfo->spu_port_alg < QIB_PORT_ALG_COUNT) |
| alg = uinfo->spu_port_alg; |
| |
| mutex_lock(&qib_mutex); |
| |
| if (qib_compatible_subctxts(swmajor, swminor) && |
| uinfo->spu_subctxt_cnt) { |
| ret = find_shared_ctxt(fp, uinfo); |
| if (ret) { |
| if (ret > 0) |
| ret = 0; |
| goto done_chk_sdma; |
| } |
| } |
| |
| i_minor = iminor(fp->f_dentry->d_inode) - QIB_USER_MINOR_BASE; |
| if (i_minor) |
| ret = find_free_ctxt(i_minor - 1, fp, uinfo); |
| else |
| ret = get_a_ctxt(fp, uinfo, alg); |
| |
| done_chk_sdma: |
| if (!ret) { |
| struct qib_filedata *fd = fp->private_data; |
| const struct qib_ctxtdata *rcd = fd->rcd; |
| const struct qib_devdata *dd = rcd->dd; |
| unsigned int weight; |
| |
| if (dd->flags & QIB_HAS_SEND_DMA) { |
| fd->pq = qib_user_sdma_queue_create(&dd->pcidev->dev, |
| dd->unit, |
| rcd->ctxt, |
| fd->subctxt); |
| if (!fd->pq) |
| ret = -ENOMEM; |
| } |
| |
| /* |
| * If process has NOT already set it's affinity, select and |
| * reserve a processor for it, as a rendezvous for all |
| * users of the driver. If they don't actually later |
| * set affinity to this cpu, or set it to some other cpu, |
| * it just means that sooner or later we don't recommend |
| * a cpu, and let the scheduler do it's best. |
| */ |
| weight = cpumask_weight(tsk_cpus_allowed(current)); |
| if (!ret && weight >= qib_cpulist_count) { |
| int cpu; |
| cpu = find_first_zero_bit(qib_cpulist, |
| qib_cpulist_count); |
| if (cpu != qib_cpulist_count) { |
| __set_bit(cpu, qib_cpulist); |
| fd->rec_cpu_num = cpu; |
| } |
| } else if (weight == 1 && |
| test_bit(cpumask_first(tsk_cpus_allowed(current)), |
| qib_cpulist)) |
| qib_devinfo(dd->pcidev, "%s PID %u affinity " |
| "set to cpu %d; already allocated\n", |
| current->comm, current->pid, |
| cpumask_first(tsk_cpus_allowed(current))); |
| } |
| |
| mutex_unlock(&qib_mutex); |
| |
| done: |
| return ret; |
| } |
| |
| |
| static int qib_do_user_init(struct file *fp, |
| const struct qib_user_info *uinfo) |
| { |
| int ret; |
| struct qib_ctxtdata *rcd = ctxt_fp(fp); |
| struct qib_devdata *dd; |
| unsigned uctxt; |
| |
| /* Subctxts don't need to initialize anything since master did it. */ |
| if (subctxt_fp(fp)) { |
| ret = wait_event_interruptible(rcd->wait, |
| !test_bit(QIB_CTXT_MASTER_UNINIT, &rcd->flag)); |
| goto bail; |
| } |
| |
| dd = rcd->dd; |
| |
| /* some ctxts may get extra buffers, calculate that here */ |
| uctxt = rcd->ctxt - dd->first_user_ctxt; |
| if (uctxt < dd->ctxts_extrabuf) { |
| rcd->piocnt = dd->pbufsctxt + 1; |
| rcd->pio_base = rcd->piocnt * uctxt; |
| } else { |
| rcd->piocnt = dd->pbufsctxt; |
| rcd->pio_base = rcd->piocnt * uctxt + |
| dd->ctxts_extrabuf; |
| } |
| |
| /* |
| * All user buffers are 2KB buffers. If we ever support |
| * giving 4KB buffers to user processes, this will need some |
| * work. Can't use piobufbase directly, because it has |
| * both 2K and 4K buffer base values. So check and handle. |
| */ |
| if ((rcd->pio_base + rcd->piocnt) > dd->piobcnt2k) { |
| if (rcd->pio_base >= dd->piobcnt2k) { |
| qib_dev_err(dd, |
| "%u:ctxt%u: no 2KB buffers available\n", |
| dd->unit, rcd->ctxt); |
| ret = -ENOBUFS; |
| goto bail; |
| } |
| rcd->piocnt = dd->piobcnt2k - rcd->pio_base; |
| qib_dev_err(dd, "Ctxt%u: would use 4KB bufs, using %u\n", |
| rcd->ctxt, rcd->piocnt); |
| } |
| |
| rcd->piobufs = dd->pio2k_bufbase + rcd->pio_base * dd->palign; |
| qib_chg_pioavailkernel(dd, rcd->pio_base, rcd->piocnt, |
| TXCHK_CHG_TYPE_USER, rcd); |
| /* |
| * try to ensure that processes start up with consistent avail update |
| * for their own range, at least. If system very quiet, it might |
| * have the in-memory copy out of date at startup for this range of |
| * buffers, when a context gets re-used. Do after the chg_pioavail |
| * and before the rest of setup, so it's "almost certain" the dma |
| * will have occurred (can't 100% guarantee, but should be many |
| * decimals of 9s, with this ordering), given how much else happens |
| * after this. |
| */ |
| dd->f_sendctrl(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); |
| |
| /* |
| * Now allocate the rcvhdr Q and eager TIDs; skip the TID |
| * array for time being. If rcd->ctxt > chip-supported, |
| * we need to do extra stuff here to handle by handling overflow |
| * through ctxt 0, someday |
| */ |
| ret = qib_create_rcvhdrq(dd, rcd); |
| if (!ret) |
| ret = qib_setup_eagerbufs(rcd); |
| if (ret) |
| goto bail_pio; |
| |
| rcd->tidcursor = 0; /* start at beginning after open */ |
| |
| /* initialize poll variables... */ |
| rcd->urgent = 0; |
| rcd->urgent_poll = 0; |
| |
| /* |
| * Now enable the ctxt for receive. |
| * For chips that are set to DMA the tail register to memory |
| * when they change (and when the update bit transitions from |
| * 0 to 1. So for those chips, we turn it off and then back on. |
| * This will (very briefly) affect any other open ctxts, but the |
| * duration is very short, and therefore isn't an issue. We |
| * explicitly set the in-memory tail copy to 0 beforehand, so we |
| * don't have to wait to be sure the DMA update has happened |
| * (chip resets head/tail to 0 on transition to enable). |
| */ |
| if (rcd->rcvhdrtail_kvaddr) |
| qib_clear_rcvhdrtail(rcd); |
| |
| dd->f_rcvctrl(rcd->ppd, QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_TIDFLOW_ENB, |
| rcd->ctxt); |
| |
| /* Notify any waiting slaves */ |
| if (rcd->subctxt_cnt) { |
| clear_bit(QIB_CTXT_MASTER_UNINIT, &rcd->flag); |
| wake_up(&rcd->wait); |
| } |
| return 0; |
| |
| bail_pio: |
| qib_chg_pioavailkernel(dd, rcd->pio_base, rcd->piocnt, |
| TXCHK_CHG_TYPE_KERN, rcd); |
| bail: |
| return ret; |
| } |
| |
| /** |
| * unlock_exptid - unlock any expected TID entries context still had in use |
| * @rcd: ctxt |
| * |
| * We don't actually update the chip here, because we do a bulk update |
| * below, using f_clear_tids. |
| */ |
| static void unlock_expected_tids(struct qib_ctxtdata *rcd) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| int ctxt_tidbase = rcd->ctxt * dd->rcvtidcnt; |
| int i, cnt = 0, maxtid = ctxt_tidbase + dd->rcvtidcnt; |
| |
| for (i = ctxt_tidbase; i < maxtid; i++) { |
| struct page *p = dd->pageshadow[i]; |
| dma_addr_t phys; |
| |
| if (!p) |
| continue; |
| |
| phys = dd->physshadow[i]; |
| dd->physshadow[i] = dd->tidinvalid; |
| dd->pageshadow[i] = NULL; |
| pci_unmap_page(dd->pcidev, phys, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| qib_release_user_pages(&p, 1); |
| cnt++; |
| } |
| } |
| |
| static int qib_close(struct inode *in, struct file *fp) |
| { |
| int ret = 0; |
| struct qib_filedata *fd; |
| struct qib_ctxtdata *rcd; |
| struct qib_devdata *dd; |
| unsigned long flags; |
| unsigned ctxt; |
| pid_t pid; |
| |
| mutex_lock(&qib_mutex); |
| |
| fd = fp->private_data; |
| fp->private_data = NULL; |
| rcd = fd->rcd; |
| if (!rcd) { |
| mutex_unlock(&qib_mutex); |
| goto bail; |
| } |
| |
| dd = rcd->dd; |
| |
| /* ensure all pio buffer writes in progress are flushed */ |
| qib_flush_wc(); |
| |
| /* drain user sdma queue */ |
| if (fd->pq) { |
| qib_user_sdma_queue_drain(rcd->ppd, fd->pq); |
| qib_user_sdma_queue_destroy(fd->pq); |
| } |
| |
| if (fd->rec_cpu_num != -1) |
| __clear_bit(fd->rec_cpu_num, qib_cpulist); |
| |
| if (--rcd->cnt) { |
| /* |
| * XXX If the master closes the context before the slave(s), |
| * revoke the mmap for the eager receive queue so |
| * the slave(s) don't wait for receive data forever. |
| */ |
| rcd->active_slaves &= ~(1 << fd->subctxt); |
| rcd->subpid[fd->subctxt] = 0; |
| mutex_unlock(&qib_mutex); |
| goto bail; |
| } |
| |
| /* early; no interrupt users after this */ |
| spin_lock_irqsave(&dd->uctxt_lock, flags); |
| ctxt = rcd->ctxt; |
| dd->rcd[ctxt] = NULL; |
| pid = rcd->pid; |
| rcd->pid = 0; |
| spin_unlock_irqrestore(&dd->uctxt_lock, flags); |
| |
| if (rcd->rcvwait_to || rcd->piowait_to || |
| rcd->rcvnowait || rcd->pionowait) { |
| rcd->rcvwait_to = 0; |
| rcd->piowait_to = 0; |
| rcd->rcvnowait = 0; |
| rcd->pionowait = 0; |
| } |
| if (rcd->flag) |
| rcd->flag = 0; |
| |
| if (dd->kregbase) { |
| /* atomically clear receive enable ctxt and intr avail. */ |
| dd->f_rcvctrl(rcd->ppd, QIB_RCVCTRL_CTXT_DIS | |
| QIB_RCVCTRL_INTRAVAIL_DIS, ctxt); |
| |
| /* clean up the pkeys for this ctxt user */ |
| qib_clean_part_key(rcd, dd); |
| qib_disarm_piobufs(dd, rcd->pio_base, rcd->piocnt); |
| qib_chg_pioavailkernel(dd, rcd->pio_base, |
| rcd->piocnt, TXCHK_CHG_TYPE_KERN, NULL); |
| |
| dd->f_clear_tids(dd, rcd); |
| |
| if (dd->pageshadow) |
| unlock_expected_tids(rcd); |
| qib_stats.sps_ctxts--; |
| } |
| |
| mutex_unlock(&qib_mutex); |
| qib_free_ctxtdata(dd, rcd); /* after releasing the mutex */ |
| |
| bail: |
| kfree(fd); |
| return ret; |
| } |
| |
| static int qib_ctxt_info(struct file *fp, struct qib_ctxt_info __user *uinfo) |
| { |
| struct qib_ctxt_info info; |
| int ret; |
| size_t sz; |
| struct qib_ctxtdata *rcd = ctxt_fp(fp); |
| struct qib_filedata *fd; |
| |
| fd = fp->private_data; |
| |
| info.num_active = qib_count_active_units(); |
| info.unit = rcd->dd->unit; |
| info.port = rcd->ppd->port; |
| info.ctxt = rcd->ctxt; |
| info.subctxt = subctxt_fp(fp); |
| /* Number of user ctxts available for this device. */ |
| info.num_ctxts = rcd->dd->cfgctxts - rcd->dd->first_user_ctxt; |
| info.num_subctxts = rcd->subctxt_cnt; |
| info.rec_cpu = fd->rec_cpu_num; |
| sz = sizeof(info); |
| |
| if (copy_to_user(uinfo, &info, sz)) { |
| ret = -EFAULT; |
| goto bail; |
| } |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| static int qib_sdma_get_inflight(struct qib_user_sdma_queue *pq, |
| u32 __user *inflightp) |
| { |
| const u32 val = qib_user_sdma_inflight_counter(pq); |
| |
| if (put_user(val, inflightp)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int qib_sdma_get_complete(struct qib_pportdata *ppd, |
| struct qib_user_sdma_queue *pq, |
| u32 __user *completep) |
| { |
| u32 val; |
| int err; |
| |
| if (!pq) |
| return -EINVAL; |
| |
| err = qib_user_sdma_make_progress(ppd, pq); |
| if (err < 0) |
| return err; |
| |
| val = qib_user_sdma_complete_counter(pq); |
| if (put_user(val, completep)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int disarm_req_delay(struct qib_ctxtdata *rcd) |
| { |
| int ret = 0; |
| |
| if (!usable(rcd->ppd)) { |
| int i; |
| /* |
| * if link is down, or otherwise not usable, delay |
| * the caller up to 30 seconds, so we don't thrash |
| * in trying to get the chip back to ACTIVE, and |
| * set flag so they make the call again. |
| */ |
| if (rcd->user_event_mask) { |
| /* |
| * subctxt_cnt is 0 if not shared, so do base |
| * separately, first, then remaining subctxt, if any |
| */ |
| set_bit(_QIB_EVENT_DISARM_BUFS_BIT, |
| &rcd->user_event_mask[0]); |
| for (i = 1; i < rcd->subctxt_cnt; i++) |
| set_bit(_QIB_EVENT_DISARM_BUFS_BIT, |
| &rcd->user_event_mask[i]); |
| } |
| for (i = 0; !usable(rcd->ppd) && i < 300; i++) |
| msleep(100); |
| ret = -ENETDOWN; |
| } |
| return ret; |
| } |
| |
| /* |
| * Find all user contexts in use, and set the specified bit in their |
| * event mask. |
| * See also find_ctxt() for a similar use, that is specific to send buffers. |
| */ |
| int qib_set_uevent_bits(struct qib_pportdata *ppd, const int evtbit) |
| { |
| struct qib_ctxtdata *rcd; |
| unsigned ctxt; |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ppd->dd->uctxt_lock, flags); |
| for (ctxt = ppd->dd->first_user_ctxt; ctxt < ppd->dd->cfgctxts; |
| ctxt++) { |
| rcd = ppd->dd->rcd[ctxt]; |
| if (!rcd) |
| continue; |
| if (rcd->user_event_mask) { |
| int i; |
| /* |
| * subctxt_cnt is 0 if not shared, so do base |
| * separately, first, then remaining subctxt, if any |
| */ |
| set_bit(evtbit, &rcd->user_event_mask[0]); |
| for (i = 1; i < rcd->subctxt_cnt; i++) |
| set_bit(evtbit, &rcd->user_event_mask[i]); |
| } |
| ret = 1; |
| break; |
| } |
| spin_unlock_irqrestore(&ppd->dd->uctxt_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * clear the event notifier events for this context. |
| * For the DISARM_BUFS case, we also take action (this obsoletes |
| * the older QIB_CMD_DISARM_BUFS, but we keep it for backwards |
| * compatibility. |
| * Other bits don't currently require actions, just atomically clear. |
| * User process then performs actions appropriate to bit having been |
| * set, if desired, and checks again in future. |
| */ |
| static int qib_user_event_ack(struct qib_ctxtdata *rcd, int subctxt, |
| unsigned long events) |
| { |
| int ret = 0, i; |
| |
| for (i = 0; i <= _QIB_MAX_EVENT_BIT; i++) { |
| if (!test_bit(i, &events)) |
| continue; |
| if (i == _QIB_EVENT_DISARM_BUFS_BIT) { |
| (void)qib_disarm_piobufs_ifneeded(rcd); |
| ret = disarm_req_delay(rcd); |
| } else |
| clear_bit(i, &rcd->user_event_mask[subctxt]); |
| } |
| return ret; |
| } |
| |
| static ssize_t qib_write(struct file *fp, const char __user *data, |
| size_t count, loff_t *off) |
| { |
| const struct qib_cmd __user *ucmd; |
| struct qib_ctxtdata *rcd; |
| const void __user *src; |
| size_t consumed, copy = 0; |
| struct qib_cmd cmd; |
| ssize_t ret = 0; |
| void *dest; |
| |
| if (count < sizeof(cmd.type)) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| ucmd = (const struct qib_cmd __user *) data; |
| |
| if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) { |
| ret = -EFAULT; |
| goto bail; |
| } |
| |
| consumed = sizeof(cmd.type); |
| |
| switch (cmd.type) { |
| case QIB_CMD_ASSIGN_CTXT: |
| case QIB_CMD_USER_INIT: |
| copy = sizeof(cmd.cmd.user_info); |
| dest = &cmd.cmd.user_info; |
| src = &ucmd->cmd.user_info; |
| break; |
| |
| case QIB_CMD_RECV_CTRL: |
| copy = sizeof(cmd.cmd.recv_ctrl); |
| dest = &cmd.cmd.recv_ctrl; |
| src = &ucmd->cmd.recv_ctrl; |
| break; |
| |
| case QIB_CMD_CTXT_INFO: |
| copy = sizeof(cmd.cmd.ctxt_info); |
| dest = &cmd.cmd.ctxt_info; |
| src = &ucmd->cmd.ctxt_info; |
| break; |
| |
| case QIB_CMD_TID_UPDATE: |
| case QIB_CMD_TID_FREE: |
| copy = sizeof(cmd.cmd.tid_info); |
| dest = &cmd.cmd.tid_info; |
| src = &ucmd->cmd.tid_info; |
| break; |
| |
| case QIB_CMD_SET_PART_KEY: |
| copy = sizeof(cmd.cmd.part_key); |
| dest = &cmd.cmd.part_key; |
| src = &ucmd->cmd.part_key; |
| break; |
| |
| case QIB_CMD_DISARM_BUFS: |
| case QIB_CMD_PIOAVAILUPD: /* force an update of PIOAvail reg */ |
| copy = 0; |
| src = NULL; |
| dest = NULL; |
| break; |
| |
| case QIB_CMD_POLL_TYPE: |
| copy = sizeof(cmd.cmd.poll_type); |
| dest = &cmd.cmd.poll_type; |
| src = &ucmd->cmd.poll_type; |
| break; |
| |
| case QIB_CMD_ARMLAUNCH_CTRL: |
| copy = sizeof(cmd.cmd.armlaunch_ctrl); |
| dest = &cmd.cmd.armlaunch_ctrl; |
| src = &ucmd->cmd.armlaunch_ctrl; |
| break; |
| |
| case QIB_CMD_SDMA_INFLIGHT: |
| copy = sizeof(cmd.cmd.sdma_inflight); |
| dest = &cmd.cmd.sdma_inflight; |
| src = &ucmd->cmd.sdma_inflight; |
| break; |
| |
| case QIB_CMD_SDMA_COMPLETE: |
| copy = sizeof(cmd.cmd.sdma_complete); |
| dest = &cmd.cmd.sdma_complete; |
| src = &ucmd->cmd.sdma_complete; |
| break; |
| |
| case QIB_CMD_ACK_EVENT: |
| copy = sizeof(cmd.cmd.event_mask); |
| dest = &cmd.cmd.event_mask; |
| src = &ucmd->cmd.event_mask; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| if (copy) { |
| if ((count - consumed) < copy) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| if (copy_from_user(dest, src, copy)) { |
| ret = -EFAULT; |
| goto bail; |
| } |
| consumed += copy; |
| } |
| |
| rcd = ctxt_fp(fp); |
| if (!rcd && cmd.type != QIB_CMD_ASSIGN_CTXT) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| switch (cmd.type) { |
| case QIB_CMD_ASSIGN_CTXT: |
| ret = qib_assign_ctxt(fp, &cmd.cmd.user_info); |
| if (ret) |
| goto bail; |
| break; |
| |
| case QIB_CMD_USER_INIT: |
| ret = qib_do_user_init(fp, &cmd.cmd.user_info); |
| if (ret) |
| goto bail; |
| ret = qib_get_base_info(fp, (void __user *) (unsigned long) |
| cmd.cmd.user_info.spu_base_info, |
| cmd.cmd.user_info.spu_base_info_size); |
| break; |
| |
| case QIB_CMD_RECV_CTRL: |
| ret = qib_manage_rcvq(rcd, subctxt_fp(fp), cmd.cmd.recv_ctrl); |
| break; |
| |
| case QIB_CMD_CTXT_INFO: |
| ret = qib_ctxt_info(fp, (struct qib_ctxt_info __user *) |
| (unsigned long) cmd.cmd.ctxt_info); |
| break; |
| |
| case QIB_CMD_TID_UPDATE: |
| ret = qib_tid_update(rcd, fp, &cmd.cmd.tid_info); |
| break; |
| |
| case QIB_CMD_TID_FREE: |
| ret = qib_tid_free(rcd, subctxt_fp(fp), &cmd.cmd.tid_info); |
| break; |
| |
| case QIB_CMD_SET_PART_KEY: |
| ret = qib_set_part_key(rcd, cmd.cmd.part_key); |
| break; |
| |
| case QIB_CMD_DISARM_BUFS: |
| (void)qib_disarm_piobufs_ifneeded(rcd); |
| ret = disarm_req_delay(rcd); |
| break; |
| |
| case QIB_CMD_PIOAVAILUPD: |
| qib_force_pio_avail_update(rcd->dd); |
| break; |
| |
| case QIB_CMD_POLL_TYPE: |
| rcd->poll_type = cmd.cmd.poll_type; |
| break; |
| |
| case QIB_CMD_ARMLAUNCH_CTRL: |
| rcd->dd->f_set_armlaunch(rcd->dd, cmd.cmd.armlaunch_ctrl); |
| break; |
| |
| case QIB_CMD_SDMA_INFLIGHT: |
| ret = qib_sdma_get_inflight(user_sdma_queue_fp(fp), |
| (u32 __user *) (unsigned long) |
| cmd.cmd.sdma_inflight); |
| break; |
| |
| case QIB_CMD_SDMA_COMPLETE: |
| ret = qib_sdma_get_complete(rcd->ppd, |
| user_sdma_queue_fp(fp), |
| (u32 __user *) (unsigned long) |
| cmd.cmd.sdma_complete); |
| break; |
| |
| case QIB_CMD_ACK_EVENT: |
| ret = qib_user_event_ack(rcd, subctxt_fp(fp), |
| cmd.cmd.event_mask); |
| break; |
| } |
| |
| if (ret >= 0) |
| ret = consumed; |
| |
| bail: |
| return ret; |
| } |
| |
| static ssize_t qib_aio_write(struct kiocb *iocb, const struct iovec *iov, |
| unsigned long dim, loff_t off) |
| { |
| struct qib_filedata *fp = iocb->ki_filp->private_data; |
| struct qib_ctxtdata *rcd = ctxt_fp(iocb->ki_filp); |
| struct qib_user_sdma_queue *pq = fp->pq; |
| |
| if (!dim || !pq) |
| return -EINVAL; |
| |
| return qib_user_sdma_writev(rcd, pq, iov, dim); |
| } |
| |
| static struct class *qib_class; |
| static dev_t qib_dev; |
| |
| int qib_cdev_init(int minor, const char *name, |
| const struct file_operations *fops, |
| struct cdev **cdevp, struct device **devp) |
| { |
| const dev_t dev = MKDEV(MAJOR(qib_dev), minor); |
| struct cdev *cdev; |
| struct device *device = NULL; |
| int ret; |
| |
| cdev = cdev_alloc(); |
| if (!cdev) { |
| printk(KERN_ERR QIB_DRV_NAME |
| ": Could not allocate cdev for minor %d, %s\n", |
| minor, name); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| cdev->owner = THIS_MODULE; |
| cdev->ops = fops; |
| kobject_set_name(&cdev->kobj, name); |
| |
| ret = cdev_add(cdev, dev, 1); |
| if (ret < 0) { |
| printk(KERN_ERR QIB_DRV_NAME |
| ": Could not add cdev for minor %d, %s (err %d)\n", |
| minor, name, -ret); |
| goto err_cdev; |
| } |
| |
| device = device_create(qib_class, NULL, dev, NULL, name); |
| if (!IS_ERR(device)) |
| goto done; |
| ret = PTR_ERR(device); |
| device = NULL; |
| printk(KERN_ERR QIB_DRV_NAME ": Could not create " |
| "device for minor %d, %s (err %d)\n", |
| minor, name, -ret); |
| err_cdev: |
| cdev_del(cdev); |
| cdev = NULL; |
| done: |
| *cdevp = cdev; |
| *devp = device; |
| return ret; |
| } |
| |
| void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp) |
| { |
| struct device *device = *devp; |
| |
| if (device) { |
| device_unregister(device); |
| *devp = NULL; |
| } |
| |
| if (*cdevp) { |
| cdev_del(*cdevp); |
| *cdevp = NULL; |
| } |
| } |
| |
| static struct cdev *wildcard_cdev; |
| static struct device *wildcard_device; |
| |
| int __init qib_dev_init(void) |
| { |
| int ret; |
| |
| ret = alloc_chrdev_region(&qib_dev, 0, QIB_NMINORS, QIB_DRV_NAME); |
| if (ret < 0) { |
| printk(KERN_ERR QIB_DRV_NAME ": Could not allocate " |
| "chrdev region (err %d)\n", -ret); |
| goto done; |
| } |
| |
| qib_class = class_create(THIS_MODULE, "ipath"); |
| if (IS_ERR(qib_class)) { |
| ret = PTR_ERR(qib_class); |
| printk(KERN_ERR QIB_DRV_NAME ": Could not create " |
| "device class (err %d)\n", -ret); |
| unregister_chrdev_region(qib_dev, QIB_NMINORS); |
| } |
| |
| done: |
| return ret; |
| } |
| |
| void qib_dev_cleanup(void) |
| { |
| if (qib_class) { |
| class_destroy(qib_class); |
| qib_class = NULL; |
| } |
| |
| unregister_chrdev_region(qib_dev, QIB_NMINORS); |
| } |
| |
| static atomic_t user_count = ATOMIC_INIT(0); |
| |
| static void qib_user_remove(struct qib_devdata *dd) |
| { |
| if (atomic_dec_return(&user_count) == 0) |
| qib_cdev_cleanup(&wildcard_cdev, &wildcard_device); |
| |
| qib_cdev_cleanup(&dd->user_cdev, &dd->user_device); |
| } |
| |
| static int qib_user_add(struct qib_devdata *dd) |
| { |
| char name[10]; |
| int ret; |
| |
| if (atomic_inc_return(&user_count) == 1) { |
| ret = qib_cdev_init(0, "ipath", &qib_file_ops, |
| &wildcard_cdev, &wildcard_device); |
| if (ret) |
| goto done; |
| } |
| |
| snprintf(name, sizeof(name), "ipath%d", dd->unit); |
| ret = qib_cdev_init(dd->unit + 1, name, &qib_file_ops, |
| &dd->user_cdev, &dd->user_device); |
| if (ret) |
| qib_user_remove(dd); |
| done: |
| return ret; |
| } |
| |
| /* |
| * Create per-unit files in /dev |
| */ |
| int qib_device_create(struct qib_devdata *dd) |
| { |
| int r, ret; |
| |
| r = qib_user_add(dd); |
| ret = qib_diag_add(dd); |
| if (r && !ret) |
| ret = r; |
| return ret; |
| } |
| |
| /* |
| * Remove per-unit files in /dev |
| * void, core kernel returns no errors for this stuff |
| */ |
| void qib_device_remove(struct qib_devdata *dd) |
| { |
| qib_user_remove(dd); |
| qib_diag_remove(dd); |
| } |