USB: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f491420..9202418 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -408,24 +408,24 @@
static void option_rx_throttle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_rx_unthrottle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_set_termios(struct usb_serial_port *port,
struct ktermios *old_termios)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Doesn't support option setting */
tty_termios_copy_hw(port->tty->termios, old_termios);
option_send_setup(port);
@@ -486,7 +486,7 @@
portdata = usb_get_serial_port_data(port);
- dbg("%s: write (%d chars)", __FUNCTION__, count);
+ dbg("%s: write (%d chars)", __func__, count);
i = 0;
left = count;
@@ -507,7 +507,7 @@
dbg("usb_write %p failed (err=%d)",
this_urb, this_urb->status);
- dbg("%s: endpoint %d buf %d", __FUNCTION__,
+ dbg("%s: endpoint %d buf %d", __func__,
usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
@@ -529,7 +529,7 @@
}
count -= left;
- dbg("%s: wrote (did %d)", __FUNCTION__, count);
+ dbg("%s: wrote (did %d)", __func__, count);
return count;
}
@@ -542,14 +542,14 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg("%s: %p", __FUNCTION__, urb);
+ dbg("%s: %p", __func__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
@@ -557,7 +557,7 @@
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
- dbg("%s: empty read urb received", __FUNCTION__);
+ dbg("%s: empty read urb received", __func__);
}
/* Resubmit urb so we continue receiving */
@@ -565,7 +565,7 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
printk(KERN_ERR "%s: resubmit read urb failed. "
- "(%d)", __FUNCTION__, err);
+ "(%d)", __func__, err);
}
}
return;
@@ -577,7 +577,7 @@
struct option_port_private *portdata;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
port = (struct usb_serial_port *) urb->context;
@@ -601,15 +601,15 @@
struct option_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- dbg("%s", __FUNCTION__);
- dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+ dbg("%s", __func__);
+ dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata);
if (status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
- dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ dbg("%s: NULL req_pkt\n", __func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
@@ -619,7 +619,7 @@
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
- dbg("%s: signal x%x", __FUNCTION__, signals);
+ dbg("%s: signal x%x", __func__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
@@ -631,11 +631,11 @@
old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
} else {
- dbg("%s: type %x req %x", __FUNCTION__,
+ dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType,req_pkt->bRequest);
}
} else
- dbg("%s: error %d", __FUNCTION__, status);
+ dbg("%s: error %d", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN) {
@@ -643,7 +643,7 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
- __FUNCTION__, err);
+ __func__, err);
}
}
@@ -662,7 +662,7 @@
data_len += OUT_BUFLEN;
}
- dbg("%s: %d", __FUNCTION__, data_len);
+ dbg("%s: %d", __func__, data_len);
return data_len;
}
@@ -680,7 +680,7 @@
if (this_urb && test_bit(i, &portdata->out_busy))
data_len += this_urb->transfer_buffer_length;
}
- dbg("%s: %d", __FUNCTION__, data_len);
+ dbg("%s: %d", __func__, data_len);
return data_len;
}
@@ -693,7 +693,7 @@
portdata = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Set some sane defaults */
portdata->rts_state = 1;
@@ -705,7 +705,7 @@
if (! urb)
continue;
if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __FUNCTION__,
+ dbg("%s: dev %p != %p", __func__,
urb->dev, serial->dev);
continue;
}
@@ -719,7 +719,7 @@
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
- __FUNCTION__, i, err,
+ __func__, i, err,
urb->transfer_buffer_length);
}
}
@@ -747,7 +747,7 @@
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
@@ -780,7 +780,7 @@
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
- dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
return NULL;
}
@@ -799,7 +799,7 @@
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
@@ -832,7 +832,7 @@
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
@@ -858,7 +858,7 @@
struct option_port_private *portdata;
u8 *buffer;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
@@ -866,7 +866,7 @@
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.",
- __FUNCTION__, i);
+ __func__, i);
return (1);
}
@@ -891,7 +891,7 @@
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d",
- __FUNCTION__, err);
+ __func__, err);
}
option_setup_urbs(serial);
@@ -915,7 +915,7 @@
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {