[POWERPC] Enable self-view of the HT host bridge on PowerMac G5
This enables the PCI code to see the device that represents the
HT host bridge on the PowerMac G5.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 73deace..6c93e7c 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -314,10 +314,13 @@
/* We only allow config cycles to devices that are in OF device-tree
* as we are apparently having some weird things going on with some
- * revs of K2 on recent G5s
+ * revs of K2 on recent G5s, except for the host bridge itself, which
+ * is missing from the tree but we know we can probe.
*/
if (bus->self)
busdn = pci_device_to_OF_node(bus->self);
+ else if (devfn == 0)
+ return 0;
else
busdn = hose->dn;
for (dn = busdn->child; dn; dn = dn->sibling)
@@ -344,14 +347,15 @@
+ (((unsigned int)bus) << 16) \
+ 0x01000000UL)
-static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
- u8 bus, u8 devfn, u8 offset)
+static void __iomem *u3_ht_cfg_access(struct pci_controller *hose, u8 bus,
+ u8 devfn, u8 offset, int *swap)
{
+ *swap = 1;
if (bus == hose->first_busno) {
- /* For now, we don't self probe U3 HT bridge */
- if (PCI_SLOT(devfn) == 0)
- return NULL;
- return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+ if (devfn != 0)
+ return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+ *swap = 0;
+ return ((void __iomem *)hose->cfg_addr) + (offset << 2);
} else
return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
}
@@ -360,14 +364,15 @@
int offset, int len, u32 *val)
{
struct pci_controller *hose;
- volatile void __iomem *addr;
+ void __iomem *addr;
+ int swap;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset >= 0x100)
return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -397,10 +402,10 @@
*val = in_8(addr);
break;
case 2:
- *val = in_le16(addr);
+ *val = swap ? in_le16(addr) : in_be16(addr);
break;
default:
- *val = in_le32(addr);
+ *val = swap ? in_le32(addr) : in_be32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -410,14 +415,15 @@
int offset, int len, u32 val)
{
struct pci_controller *hose;
- volatile void __iomem *addr;
+ void __iomem *addr;
+ int swap;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset >= 0x100)
return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -439,10 +445,10 @@
out_8(addr, val);
break;
case 2:
- out_le16(addr, val);
+ swap ? out_le16(addr, val) : out_be16(addr, val);
break;
default:
- out_le32((u32 __iomem *)addr, val);
+ swap ? out_le32(addr, val) : out_be32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
@@ -780,16 +786,26 @@
{
struct device_node *np = hose->dn;
struct pci_controller *other = NULL;
+ struct resource cfg_res, self_res;
int i, cur;
hose->ops = &u3_ht_pci_ops;
- /* We hard code the address because of the different size of
- * the reg address cell, we shall fix that by killing struct
- * reg_property and using some accessor functions instead
+ /* Get base addresses from OF tree
*/
- hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+ if (of_address_to_resource(np, 0, &cfg_res) ||
+ of_address_to_resource(np, 1, &self_res)) {
+ printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n");
+ return;
+ }
+
+ /* Map external cfg space access into cfg_data and self registers
+ * into cfg_addr
+ */
+ hose->cfg_data = ioremap(cfg_res.start, 0x02000000);
+ hose->cfg_addr = ioremap(self_res.start,
+ self_res.end - self_res.start + 1);
/*
* /ht node doesn't expose a "ranges" property, so we "remove"
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 3acb59d..869ca45 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -613,9 +613,11 @@
/* We need to use normal PCI probing for the AGP bus,
* since the device for the AGP bridge isn't in the tree.
+ * Same for the PCIe host on U4 and the HT host bridge.
*/
if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
- of_device_is_compatible(node, "u4-pcie")))
+ of_device_is_compatible(node, "u4-pcie") ||
+ of_device_is_compatible(node, "u3-ht")))
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}