libata: s/ap->id/ap->print_id/g
ata_port has two different id fields - id and port_no. id is
system-wide 1-based unique id for the port while port_no is 0-based
host-wide port number. The former is primarily used to identify the
ATA port to the user in printk messages while the latter is used in
various places in libata core and LLDs to index the port inside the
host.
The two fields feel quite similar and sometimes ap->id is used in
place of ap->port_no, which is very difficult to spot. This patch
renames ap->id to ap->print_id to reduce the possibility of such bugs.
Some printk messages are adjusted such that id string (ata%u[.%u])
isn't printed twice and/or to use ata_*_printk() instead of hardcoded
id format.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3adc2cf..d3b4e25 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -72,7 +72,7 @@
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static void ata_dev_xfermask(struct ata_device *dev);
-static unsigned int ata_unique_id = 1;
+static unsigned int ata_print_id = 1;
static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
@@ -891,8 +891,8 @@
unsigned int wait, unsigned int can_sleep)
{
if (ata_msg_probe(ap))
- ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
- "device %u, wait %u\n", ap->id, device, wait);
+ ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+ "device %u, wait %u\n", device, wait);
if (wait)
ata_wait_idle(ap);
@@ -1392,8 +1392,7 @@
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
@@ -1430,7 +1429,7 @@
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->id, dev->devno);
+ ap->print_id, dev->devno);
return -ENOENT;
}
@@ -1558,15 +1557,13 @@
int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
- ata_dev_printk(dev, KERN_INFO,
- "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
+ __FUNCTION__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
/* set _SDD */
rc = ata_acpi_push_id(ap, dev->devno);
@@ -1610,8 +1607,9 @@
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
if (id[162] & 1) /* CPRM may make this media unusable */
- ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING,
+ "supports DRM functions and may "
+ "not be fully accessable.\n");
snprintf(revbuf, 7, "CFA");
}
else
@@ -2650,7 +2648,7 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- DPRINTK("ata%u: bus reset via SRST\n", ap->id);
+ DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
/* software reset. causes dev0 to be selected */
iowrite8(ap->ctl, ioaddr->ctl_addr);
@@ -2710,7 +2708,7 @@
u8 err;
unsigned int dev0, dev1 = 0, devmask = 0;
- DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
+ DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
/* determine if device 0/1 are present */
if (ap->flags & ATA_FLAG_SATA_RESET)
@@ -3779,7 +3777,7 @@
struct scatterlist *lsg = &sg[qc->n_elem - 1];
int n_elem, pre_n_elem, dir, trim_sg = 0;
- VPRINTK("ENTER, ata%u\n", ap->id);
+ VPRINTK("ENTER, ata%u\n", ap->print_id);
WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
/* we must lengthen transfers to end on a 32-bit boundary */
@@ -4180,7 +4178,7 @@
if (do_write != i_write)
goto err_out;
- VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
+ VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
__atapi_pio_bytes(qc, bytes);
@@ -4297,7 +4295,7 @@
fsm_start:
DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -4330,8 +4328,8 @@
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
+ "error, dev_stat 0x%X\n", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4388,8 +4386,9 @@
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+ "device error, dev_stat 0x%X\n",
+ status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4475,7 +4474,7 @@
/* no more data to transfer */
DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
- ap->id, qc->dev->devno, status);
+ ap->print_id, qc->dev->devno, status);
WARN_ON(qc->err_mask);
@@ -5017,7 +5016,7 @@
u8 status, host_stat = 0;
VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
@@ -5038,7 +5037,8 @@
qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
/* check status of DMA engine */
host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+ VPRINTK("ata%u: host_stat 0x%X\n",
+ ap->print_id, host_stat);
/* if it's not our irq... */
if (!(host_stat & ATA_DMA_INTR))
@@ -5497,7 +5497,7 @@
ap->lock = &host->lock;
ap->flags = ATA_FLAG_DISABLED;
- ap->id = ata_unique_id++;
+ ap->print_id = ata_print_id++;
ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = ent->dev;
@@ -5568,7 +5568,7 @@
{
ap->scsi_host = shost;
- shost->unique_id = ap->id;
+ shost->unique_id = ap->print_id;
shost->max_id = 16;
shost->max_lun = 1;
shost->max_channel = 1;
@@ -5832,9 +5832,9 @@
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
- DPRINTK("ata%u: bus probe begin\n", ap->id);
+ DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
- DPRINTK("ata%u: bus probe end\n", ap->id);
+ DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?