| /* sound/soc/s3c24xx/s3c2412-i2s.c |
| * |
| * ALSA Soc Audio Layer - S3C2412 I2S driver |
| * |
| * Copyright (c) 2006 Wolfson Microelectronics PLC. |
| * Graeme Gregory graeme.gregory@wolfsonmicro.com |
| * linux@wolfsonmicro.com |
| * |
| * Copyright (c) 2007, 2004-2005 Simtec Electronics |
| * http://armlinux.simtec.co.uk/ |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/initval.h> |
| #include <sound/soc.h> |
| #include <mach/hardware.h> |
| |
| #include <mach/regs-gpio.h> |
| #include <mach/dma.h> |
| |
| #include "s3c-dma.h" |
| #include "regs-i2s-v2.h" |
| #include "s3c2412-i2s.h" |
| |
| #define S3C2412_I2S_DEBUG 0 |
| |
| static struct s3c2410_dma_client s3c2412_dma_client_out = { |
| .name = "I2S PCM Stereo out" |
| }; |
| |
| static struct s3c2410_dma_client s3c2412_dma_client_in = { |
| .name = "I2S PCM Stereo in" |
| }; |
| |
| static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = { |
| .client = &s3c2412_dma_client_out, |
| .channel = DMACH_I2S_OUT, |
| .dma_addr = S3C2410_PA_IIS + S3C2412_IISTXD, |
| .dma_size = 4, |
| }; |
| |
| static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = { |
| .client = &s3c2412_dma_client_in, |
| .channel = DMACH_I2S_IN, |
| .dma_addr = S3C2410_PA_IIS + S3C2412_IISRXD, |
| .dma_size = 4, |
| }; |
| |
| static struct s3c_i2sv2_info s3c2412_i2s; |
| |
| static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) |
| { |
| return cpu_dai->private_data; |
| } |
| |
| static int s3c2412_i2s_probe(struct platform_device *pdev, |
| struct snd_soc_dai *dai) |
| { |
| int ret; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| ret = s3c_i2sv2_probe(pdev, dai, &s3c2412_i2s, S3C2410_PA_IIS); |
| if (ret) |
| return ret; |
| |
| s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in; |
| s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out; |
| |
| s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk"); |
| if (s3c2412_i2s.iis_cclk == NULL) { |
| pr_err("failed to get i2sclk clock\n"); |
| iounmap(s3c2412_i2s.regs); |
| return -ENODEV; |
| } |
| |
| /* Set MPLL as the source for IIS CLK */ |
| |
| clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); |
| clk_enable(s3c2412_i2s.iis_cclk); |
| |
| s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk; |
| |
| /* Configure the I2S pins in correct mode */ |
| s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); |
| s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK); |
| s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK); |
| s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); |
| s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); |
| |
| return 0; |
| } |
| |
| static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct s3c_i2sv2_info *i2s = to_info(cpu_dai); |
| struct s3c_dma_params *dma_data; |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dma_data = i2s->dma_playback; |
| else |
| dma_data = i2s->dma_capture; |
| |
| snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); |
| |
| iismod = readl(i2s->regs + S3C2412_IISMOD); |
| pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S8: |
| iismod |= S3C2412_IISMOD_8BIT; |
| break; |
| case SNDRV_PCM_FORMAT_S16_LE: |
| iismod &= ~S3C2412_IISMOD_8BIT; |
| break; |
| } |
| |
| writel(iismod, i2s->regs + S3C2412_IISMOD); |
| pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); |
| |
| return 0; |
| } |
| |
| #define S3C2412_I2S_RATES \ |
| (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ |
| SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) |
| |
| static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = { |
| .hw_params = s3c2412_i2s_hw_params, |
| }; |
| |
| struct snd_soc_dai s3c2412_i2s_dai = { |
| .name = "s3c2412-i2s", |
| .id = 0, |
| .probe = s3c2412_i2s_probe, |
| .playback = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C2412_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C2412_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .ops = &s3c2412_i2s_dai_ops, |
| }; |
| EXPORT_SYMBOL_GPL(s3c2412_i2s_dai); |
| |
| static int __init s3c2412_i2s_init(void) |
| { |
| return s3c_i2sv2_register_dai(&s3c2412_i2s_dai); |
| } |
| module_init(s3c2412_i2s_init); |
| |
| static void __exit s3c2412_i2s_exit(void) |
| { |
| snd_soc_unregister_dai(&s3c2412_i2s_dai); |
| } |
| module_exit(s3c2412_i2s_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); |
| MODULE_DESCRIPTION("S3C2412 I2S SoC Interface"); |
| MODULE_LICENSE("GPL"); |