ALSA: jazz16: refine dma and irq selection
Narrow the dma and irq selection after the DOS driver.
Add ALSA configuration description as well.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index d52966b..8d21a3f 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -189,10 +189,29 @@
if (port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR "please specify port\n");
return 0;
+ } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) {
+ snd_printk(KERN_ERR "incorrect port specified\n");
+ return 0;
+ }
+ if (dma8[dev] != SNDRV_AUTO_DMA &&
+ dma8[dev] != 1 && dma8[dev] != 3) {
+ snd_printk(KERN_ERR "dma8 must be 1 or 3\n");
+ return 0;
}
if (dma16[dev] != SNDRV_AUTO_DMA &&
dma16[dev] != 5 && dma16[dev] != 7) {
- snd_printk(KERN_ERR "dma16 must be 5 or 7");
+ snd_printk(KERN_ERR "dma16 must be 5 or 7\n");
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ (mpu_port[dev] & ~0x030) != 0x300) {
+ snd_printk(KERN_ERR "incorrect mpu_port specified\n");
+ return 0;
+ }
+ if (mpu_irq[dev] != SNDRV_AUTO_DMA &&
+ mpu_irq[dev] != 2 && mpu_irq[dev] != 3 &&
+ mpu_irq[dev] != 5 && mpu_irq[dev] != 7) {
+ snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n");
return 0;
}
return 1;
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 3222aed..7d84c9f 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -510,7 +510,8 @@
}
switch (chip->hardware) {
case SB_HW_JAZZ16:
- runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
+ if (chip->dma16 == 5 || chip->dma16 == 7)
+ runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000;
runtime->hw.rate_min = 4000;
runtime->hw.rate_max = 50000;