blob: 30525aac06ab2b2fff36e86e8b14e44308ad4965 [file] [log] [blame]
/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <3>;
qcom,pma8084@0 {
spmi-slave-container;
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
pma8084_gpios: gpios {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pma8084-gpio";
gpio@c000 {
reg = <0xc000 0x100>;
qcom,pin-num = <1>;
};
gpio@c100 {
reg = <0xc100 0x100>;
qcom,pin-num = <2>;
};
gpio@c200 {
reg = <0xc200 0x100>;
qcom,pin-num = <3>;
};
gpio@c300 {
reg = <0xc300 0x100>;
qcom,pin-num = <4>;
};
gpio@c400 {
reg = <0xc400 0x100>;
qcom,pin-num = <5>;
};
gpio@c500 {
reg = <0xc500 0x100>;
qcom,pin-num = <6>;
};
gpio@c600 {
reg = <0xc600 0x100>;
qcom,pin-num = <7>;
};
gpio@c700 {
reg = <0xc700 0x100>;
qcom,pin-num = <8>;
};
gpio@c800 {
reg = <0xc800 0x100>;
qcom,pin-num = <9>;
};
gpio@c900 {
reg = <0xc900 0x100>;
qcom,pin-num = <10>;
};
gpio@ca00 {
reg = <0xca00 0x100>;
qcom,pin-num = <11>;
};
gpio@cb00 {
reg = <0xcb00 0x100>;
qcom,pin-num = <12>;
};
gpio@cc00 {
reg = <0xcc00 0x100>;
qcom,pin-num = <13>;
};
gpio@cd00 {
reg = <0xcd00 0x100>;
qcom,pin-num = <14>;
};
gpio@ce00 {
reg = <0xce00 0x100>;
qcom,pin-num = <15>;
};
gpio@cf00 {
reg = <0xcf00 0x100>;
qcom,pin-num = <16>;
};
gpio@d000 {
reg = <0xd000 0x100>;
qcom,pin-num = <17>;
};
gpio@d100 {
reg = <0xd100 0x100>;
qcom,pin-num = <18>;
};
gpio@d200 {
reg = <0xd200 0x100>;
qcom,pin-num = <19>;
};
gpio@d300 {
reg = <0xd300 0x100>;
qcom,pin-num = <20>;
};
gpio@d400 {
reg = <0xd400 0x100>;
qcom,pin-num = <21>;
};
gpio@d500 {
reg = <0xd500 0x100>;
qcom,pin-num = <22>;
};
};
pma8084_mpps: mpps {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pma8084-mpp";
mpp@a000 {
reg = <0xa000 0x100>;
qcom,pin-num = <1>;
};
mpp@a100 {
reg = <0xa100 0x100>;
qcom,pin-num = <2>;
};
mpp@a200 {
reg = <0xa200 0x100>;
qcom,pin-num = <3>;
};
mpp@a300 {
reg = <0xa300 0x100>;
qcom,pin-num = <4>;
};
mpp@a400 {
reg = <0xa400 0x100>;
qcom,pin-num = <5>;
};
mpp@a500 {
reg = <0xa500 0x100>;
qcom,pin-num = <6>;
};
mpp@a600 {
reg = <0xa600 0x100>;
qcom,pin-num = <7>;
};
mpp@a700 {
reg = <0xa700 0x100>;
qcom,pin-num = <8>;
};
};
};
qcom,pma8084@1 {
spmi-slave-container;
reg = <0x1>;
#address-cells = <1>;
#size-cells = <1>;
regulator@1400 {
regulator-name = "8084_s1";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1400 0x300>;
status = "disabled";
qcom,ctl@1400 {
reg = <0x1400 0x100>;
};
qcom,ps@1500 {
reg = <0x1500 0x100>;
};
qcom,freq@1600 {
reg = <0x1600 0x100>;
};
};
regulator@1700 {
regulator-name = "8084_s2";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1700 0x300>;
status = "disabled";
qcom,ctl@1700 {
reg = <0x1700 0x100>;
};
qcom,ps@1800 {
reg = <0x1800 0x100>;
};
qcom,freq@1900 {
reg = <0x1900 0x100>;
};
};
regulator@1a00 {
regulator-name = "8084_s3";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1a00 0x300>;
status = "disabled";
qcom,ctl@1a00 {
reg = <0x1a00 0x100>;
};
qcom,ps@1b00 {
reg = <0x1b00 0x100>;
};
qcom,freq@1c00 {
reg = <0x1c00 0x100>;
};
};
regulator@1d00 {
regulator-name = "8084_s4";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1d00 0x300>;
status = "disabled";
qcom,ctl@1d00 {
reg = <0x1d00 0x100>;
};
qcom,ps@1e00 {
reg = <0x1e00 0x100>;
};
qcom,freq@1f00 {
reg = <0x1f00 0x100>;
};
};
regulator@2000 {
regulator-name = "8084_s5";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2000 0x300>;
status = "disabled";
qcom,ctl@2000 {
reg = <0x2000 0x100>;
};
qcom,ps@2100 {
reg = <0x2100 0x100>;
};
qcom,freq@2200 {
reg = <0x2200 0x100>;
};
};
regulator@2300 {
regulator-name = "8084_s6";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2300 0x300>;
status = "disabled";
qcom,ctl@2300 {
reg = <0x2300 0x100>;
};
qcom,ps@2400 {
reg = <0x2400 0x100>;
};
qcom,freq@2500 {
reg = <0x2500 0x100>;
};
};
regulator@2600 {
regulator-name = "8084_s7";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2600 0x300>;
status = "disabled";
qcom,ctl@2600 {
reg = <0x2600 0x100>;
};
qcom,ps@2700 {
reg = <0x2700 0x100>;
};
qcom,freq@2800 {
reg = <0x2800 0x100>;
};
};
regulator@2900 {
regulator-name = "8084_s8";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2900 0x300>;
status = "disabled";
qcom,ctl@2900 {
reg = <0x2900 0x100>;
};
qcom,ps@2a00 {
reg = <0x2a00 0x100>;
};
qcom,freq@2b00 {
reg = <0x2b00 0x100>;
};
};
regulator@2c00 {
regulator-name = "8084_s9";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2c00 0x300>;
status = "disabled";
qcom,ctl@2c00 {
reg = <0x2c00 0x100>;
};
qcom,ps@2d00 {
reg = <0x2d00 0x100>;
};
qcom,freq@2e00 {
reg = <0x2e00 0x100>;
};
};
regulator@2f00 {
regulator-name = "8084_s10";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x2f00 0x300>;
status = "disabled";
qcom,ctl@2f00 {
reg = <0x2f00 0x100>;
};
qcom,ps@3000 {
reg = <0x3000 0x100>;
};
qcom,freq@3100 {
reg = <0x3100 0x100>;
};
};
regulator@3200 {
regulator-name = "8084_s11";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x3200 0x300>;
status = "disabled";
qcom,ctl@3200 {
reg = <0x3200 0x100>;
};
qcom,ps@3300 {
reg = <0x3300 0x100>;
};
qcom,freq@3400 {
reg = <0x3400 0x100>;
};
};
regulator@3500 {
regulator-name = "8084_s12";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x3500 0x300>;
status = "disabled";
qcom,ctl@3500 {
reg = <0x3500 0x100>;
};
qcom,ps@3600 {
reg = <0x3600 0x100>;
};
qcom,freq@3700 {
reg = <0x3700 0x100>;
};
};
regulator@4000 {
regulator-name = "8084_l1";
reg = <0x4000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4100 {
regulator-name = "8084_l2";
reg = <0x4100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4200 {
regulator-name = "8084_l3";
reg = <0x4200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4300 {
regulator-name = "8084_l4";
reg = <0x4300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4400 {
regulator-name = "8084_l5";
reg = <0x4400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4500 {
regulator-name = "8084_l6";
reg = <0x4500 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4600 {
regulator-name = "8084_l7";
reg = <0x4600 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4700 {
regulator-name = "8084_l8";
reg = <0x4700 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4800 {
regulator-name = "8084_l9";
reg = <0x4800 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4900 {
regulator-name = "8084_l10";
reg = <0x4900 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4a00 {
regulator-name = "8084_l11";
reg = <0x4a00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4b00 {
regulator-name = "8084_l12";
reg = <0x4b00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4c00 {
regulator-name = "8084_l13";
reg = <0x4c00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4d00 {
regulator-name = "8084_l14";
reg = <0x4d00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4e00 {
regulator-name = "8084_l15";
reg = <0x4e00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4f00 {
regulator-name = "8084_l16";
reg = <0x4f00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5000 {
regulator-name = "8084_l17";
reg = <0x5000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5100 {
regulator-name = "8084_l18";
reg = <0x5100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5200 {
regulator-name = "8084_l19";
reg = <0x5200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5300 {
regulator-name = "8084_l20";
reg = <0x5300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5400 {
regulator-name = "8084_l21";
reg = <0x5400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5500 {
regulator-name = "8084_l22";
reg = <0x5500 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5600 {
regulator-name = "8084_l23";
reg = <0x5600 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5700 {
regulator-name = "8084_l24";
reg = <0x5700 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5800 {
regulator-name = "8084_l25";
reg = <0x5800 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5900 {
regulator-name = "8084_l26";
reg = <0x5900 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@5a00 {
regulator-name = "8084_l27";
reg = <0x5a00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@8000 {
regulator-name = "8084_lvs1";
reg = <0x8000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@8100 {
regulator-name = "8084_lvs2";
reg = <0x8100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@8200 {
regulator-name = "8084_lvs3";
reg = <0x8200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@8300 {
regulator-name = "8084_lvs4";
reg = <0x8300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@8400 {
regulator-name = "8084_mvs1";
reg = <0x8400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
};
};