bnx2x: credit-leakage fixup on vlan_mac_del_all
Upon insertion of elements into the execution queue, it is validated
that there are enough credits to support additional vlan-macs,
and the credits are consumed. However, when removing a pending
command in `bnx2x_vland_mac_del_all' the consumed credits are not
released, which might cause leakage and eventually the inability to
add new vlan-macs in certain scenarios.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 5ac6160..cb6339c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -50,6 +50,7 @@
int exe_len,
union bnx2x_qable_obj *owner,
exe_q_validate validate,
+ exe_q_remove remove,
exe_q_optimize optimize,
exe_q_execute exec,
exe_q_get get)
@@ -66,6 +67,7 @@
/* Owner specific callbacks */
o->validate = validate;
+ o->remove = remove;
o->optimize = optimize;
o->execute = exec;
o->get = get;
@@ -1340,6 +1342,35 @@
}
}
+static int bnx2x_remove_vlan_mac(struct bnx2x *bp,
+ union bnx2x_qable_obj *qo,
+ struct bnx2x_exeq_elem *elem)
+{
+ int rc = 0;
+
+ /* If consumption wasn't required, nothing to do */
+ if (test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+ &elem->cmd_data.vlan_mac.vlan_mac_flags))
+ return 0;
+
+ switch (elem->cmd_data.vlan_mac.cmd) {
+ case BNX2X_VLAN_MAC_ADD:
+ case BNX2X_VLAN_MAC_MOVE:
+ rc = qo->vlan_mac.put_credit(&qo->vlan_mac);
+ break;
+ case BNX2X_VLAN_MAC_DEL:
+ rc = qo->vlan_mac.get_credit(&qo->vlan_mac);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (rc != true)
+ return -EINVAL;
+
+ return 0;
+}
+
/**
* bnx2x_wait_vlan_mac - passivly wait for 5 seconds until all work completes.
*
@@ -1801,8 +1832,14 @@
list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) {
if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags ==
- *vlan_mac_flags)
+ *vlan_mac_flags) {
+ rc = exeq->remove(bp, exeq->owner, exeq_pos);
+ if (rc) {
+ BNX2X_ERR("Failed to remove command\n");
+ return rc;
+ }
list_del(&exeq_pos->link);
+ }
}
spin_unlock_bh(&exeq->lock);
@@ -1908,6 +1945,7 @@
bnx2x_exe_queue_init(bp,
&mac_obj->exe_queue, 1, qable_obj,
bnx2x_validate_vlan_mac,
+ bnx2x_remove_vlan_mac,
bnx2x_optimize_vlan_mac,
bnx2x_execute_vlan_mac,
bnx2x_exeq_get_mac);
@@ -1924,6 +1962,7 @@
bnx2x_exe_queue_init(bp,
&mac_obj->exe_queue, CLASSIFY_RULES_COUNT,
qable_obj, bnx2x_validate_vlan_mac,
+ bnx2x_remove_vlan_mac,
bnx2x_optimize_vlan_mac,
bnx2x_execute_vlan_mac,
bnx2x_exeq_get_mac);
@@ -1963,6 +2002,7 @@
bnx2x_exe_queue_init(bp,
&vlan_obj->exe_queue, CLASSIFY_RULES_COUNT,
qable_obj, bnx2x_validate_vlan_mac,
+ bnx2x_remove_vlan_mac,
bnx2x_optimize_vlan_mac,
bnx2x_execute_vlan_mac,
bnx2x_exeq_get_vlan);
@@ -2009,6 +2049,7 @@
bnx2x_exe_queue_init(bp,
&vlan_mac_obj->exe_queue, 1, qable_obj,
bnx2x_validate_vlan_mac,
+ bnx2x_remove_vlan_mac,
bnx2x_optimize_vlan_mac,
bnx2x_execute_vlan_mac,
bnx2x_exeq_get_vlan_mac);
@@ -2025,6 +2066,7 @@
&vlan_mac_obj->exe_queue,
CLASSIFY_RULES_COUNT,
qable_obj, bnx2x_validate_vlan_mac,
+ bnx2x_remove_vlan_mac,
bnx2x_optimize_vlan_mac,
bnx2x_execute_vlan_mac,
bnx2x_exeq_get_vlan_mac);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 992308f..66da39f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -161,6 +161,10 @@
union bnx2x_qable_obj *o,
struct bnx2x_exeq_elem *elem);
+typedef int (*exe_q_remove)(struct bnx2x *bp,
+ union bnx2x_qable_obj *o,
+ struct bnx2x_exeq_elem *elem);
+
/**
* @return positive is entry was optimized, 0 - if not, negative
* in case of an error.
@@ -203,11 +207,18 @@
*/
exe_q_validate validate;
+ /**
+ * Called before removing pending commands, cleaning allocated
+ * resources (e.g., credits from validate)
+ */
+ exe_q_remove remove;
/**
* This will try to cancel the current pending commands list
* considering the new command.
*
+ * Returns the number of optimized commands or a negative error code
+ *
* Must run under exe_queue->lock
*/
exe_q_optimize optimize;