diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index abbb447..8387172 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -12,7 +12,8 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
  *	and extra documentation
@@ -25,7 +26,8 @@
 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
 /* Thanx to FTDI for so kindly providing details of the protocol required */
 /*   to talk to the device */
-/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */
+/* Thanx to gkh and the rest of the usb dev group for all code I have
+   assimilated :-) */
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -36,7 +38,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
 #include <linux/usb/serial.h>
@@ -55,17 +57,22 @@
 
 struct ftdi_private {
 	ftdi_chip_type_t chip_type;
-				/* type of the device, either SIO or FT8U232AM */
+				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
-	int custom_divisor;	/* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
+	int custom_divisor;	/* custom_divisor kludge, this is for
+				   baud_base (different from what goes to the
+				   chip!) */
 	__u16 last_set_data_urb_value ;
-				/* the last data state set - needed for doing a break */
-        int write_offset;       /* This is the offset in the usb data block to write the serial data -
-				 * it is different between devices
+				/* the last data state set - needed for doing
+				 * a break
+				 */
+	int write_offset;       /* This is the offset in the usb data block to
+				 * write the serial data - it varies between
+				 * devices
 				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
-        wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
 	__u8 rx_flags;		/* receive state flags (throttling) */
 	spinlock_t rx_lock;	/* spinlock for receive state */
@@ -76,8 +83,10 @@
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
-	speed_t force_baud;	/* if non-zero, force the baud rate to this value */
-	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
+	speed_t force_baud;	/* if non-zero, force the baud rate to
+				   this value */
+	int force_rtscts;	/* if non-zero, force RTS-CTS to always
+				   be enabled */
 
 	spinlock_t tx_lock;	/* spinlock for transmit state */
 	unsigned long tx_bytes;
@@ -88,13 +97,14 @@
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
 struct ftdi_sio_quirk {
 	int (*probe)(struct usb_serial *);
-	void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */
+	/* Special settings for probed ports. */
+	void (*port_probe)(struct ftdi_private *);
 };
 
-static int   ftdi_jtag_probe		(struct usb_serial *serial);
-static int   ftdi_mtxorb_hack_setup	(struct usb_serial *serial);
-static void  ftdi_USB_UIRT_setup	(struct ftdi_private *priv);
-static void  ftdi_HE_TIRA1_setup	(struct ftdi_private *priv);
+static int   ftdi_jtag_probe(struct usb_serial *serial);
+static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
+static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
 static struct ftdi_sio_quirk ftdi_jtag_quirk = {
 	.probe	= ftdi_jtag_probe,
@@ -174,270 +184,270 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -642,7 +652,7 @@
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver ftdi_driver = {
 	.name =		"ftdi_sio",
@@ -678,30 +688,37 @@
  | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
 
 /* function prototypes for a FTDI serial converter */
-static int  ftdi_sio_probe	(struct usb_serial *serial, const struct usb_device_id *id);
-static void ftdi_shutdown		(struct usb_serial *serial);
-static int  ftdi_sio_port_probe	(struct usb_serial_port *port);
-static int  ftdi_sio_port_remove	(struct usb_serial_port *port);
-static int  ftdi_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void ftdi_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  ftdi_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  ftdi_write_room		(struct tty_struct *tty);
-static int  ftdi_chars_in_buffer	(struct tty_struct *tty);
-static void ftdi_write_bulk_callback	(struct urb *urb);
-static void ftdi_read_bulk_callback	(struct urb *urb);
-static void ftdi_process_read		(struct work_struct *work);
-static void ftdi_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int  ftdi_tiocmget               (struct tty_struct *tty, struct file *file);
-static int  ftdi_tiocmset		(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear);
-static int  ftdi_ioctl			(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void ftdi_break_ctl		(struct tty_struct *tty, int break_state );
-static void ftdi_throttle		(struct tty_struct *tty);
-static void ftdi_unthrottle		(struct tty_struct *tty);
+static int  ftdi_sio_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static void ftdi_shutdown(struct usb_serial *serial);
+static int  ftdi_sio_port_probe(struct usb_serial_port *port);
+static int  ftdi_sio_port_remove(struct usb_serial_port *port);
+static int  ftdi_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static int  ftdi_write_room(struct tty_struct *tty);
+static int  ftdi_chars_in_buffer(struct tty_struct *tty);
+static void ftdi_write_bulk_callback(struct urb *urb);
+static void ftdi_read_bulk_callback(struct urb *urb);
+static void ftdi_process_read(struct work_struct *work);
+static void ftdi_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
+static int  ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+static int  ftdi_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
+static void ftdi_throttle(struct tty_struct *tty);
+static void ftdi_unthrottle(struct tty_struct *tty);
 
-static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
-static unsigned short int ftdi_232am_baud_to_divisor (int baud);
-static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
-static __u32 ftdi_232bm_baud_to_divisor (int baud);
+static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
+static unsigned short int ftdi_232am_baud_to_divisor(int baud);
+static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_232bm_baud_to_divisor(int baud);
 
 static struct usb_serial_driver ftdi_sio_device = {
 	.driver = {
@@ -752,44 +769,54 @@
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
 {
 	unsigned short int divisor;
-	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
-	if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = base / 2 / baud;
+	if ((divisor3 & 0x7) == 7)
+		divisor3++; /* round x.7/8 up to x+1 */
 	divisor = divisor3 >> 3;
 	divisor3 &= 0x7;
-	if (divisor3 == 1) divisor |= 0xc000; else // 0.125
-	if (divisor3 >= 4) divisor |= 0x4000; else // 0.5
-	if (divisor3 != 0) divisor |= 0x8000;      // 0.25
-	if (divisor == 1) divisor = 0;	/* special case for maximum baud rate */
+	if (divisor3 == 1)
+		divisor |= 0xc000;
+	else if (divisor3 >= 4)
+		divisor |= 0x4000;
+	else if (divisor3 != 0)
+		divisor |= 0x8000;
+	else if (divisor == 1)
+		divisor = 0;	/* special case for maximum baud rate */
 	return divisor;
 }
 
 static unsigned short int ftdi_232am_baud_to_divisor(int baud)
 {
-	 return(ftdi_232am_baud_base_to_divisor(baud, 48000000));
+	 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
 }
 
 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
 {
 	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
 	__u32 divisor;
-	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = base / 2 / baud;
 	divisor = divisor3 >> 3;
 	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
 	/* Deal with special cases for highest baud rates. */
-	if (divisor == 1) divisor = 0; else	// 1.0
-	if (divisor == 0x4001) divisor = 1;	// 1.5
+	if (divisor == 1)
+		divisor = 0;
+	else if (divisor == 0x4001)
+		divisor = 1;
 	return divisor;
 }
 
 static __u32 ftdi_232bm_baud_to_divisor(int baud)
 {
-	 return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
+	 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
 }
 
 #define set_mctrl(port, set)		update_mctrl((port), (set), 0)
 #define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
 
-static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
+static int update_mctrl(struct usb_serial_port *port, unsigned int set,
+							unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
@@ -843,7 +870,8 @@
 }
 
 
-static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port)
+static __u32 get_ftdi_divisor(struct tty_struct *tty,
+						struct usb_serial_port *port)
 { /* get_ftdi_divisor */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
@@ -851,48 +879,56 @@
 	int baud;
 
 	/*
-	 * The logic involved in setting the baudrate can be cleanly split in 3 steps.
-	 * Obtaining the actual baud rate is a little tricky since unix traditionally
-	 * somehow ignored the possibility to set non-standard baud rates.
+	 * The logic involved in setting the baudrate can be cleanly split into
+	 * 3 steps.
 	 * 1. Standard baud rates are set in tty->termios->c_cflag
-	 * 2. If these are not enough, you can set any speed using alt_speed as follows:
+	 * 2. If these are not enough, you can set any speed using alt_speed as
+	 * follows:
 	 *    - set tty->termios->c_cflag speed to B38400
 	 *    - set your real speed in tty->alt_speed; it gets ignored when
 	 *      alt_speed==0, (or)
-	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
-	 *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just
-	 *      sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800)
+	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as
+	 *	follows:
+	 *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
+	 *	this just sets alt_speed to (HI: 57600, VHI: 115200,
+	 *	SHI: 230400, WARP: 460800)
 	 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
 	 * 3. You can also set baud rate by setting custom divisor as follows
 	 *    - set tty->termios->c_cflag speed to B38400
-	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
+	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as
+	 *	follows:
 	 *      o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
 	 *      o custom_divisor set to baud_base / your_new_baudrate
-	 * ** Step 3 is done courtesy of code borrowed from serial.c - I should really
-	 *    spend some time and separate+move this common code to serial.c, it is
-	 *    replicated in nearly every serial driver you see.
+	 * ** Step 3 is done courtesy of code borrowed from serial.c
+	 *    I should really spend some time and separate + move this common
+	 *    code to serial.c, it is replicated in nearly every serial driver
+	 *    you see.
 	 */
 
-	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
+	/* 1. Get the baud rate from the tty settings, this observes
+	      alt_speed hack */
 
 	baud = tty_get_baud_rate(tty);
 	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
-	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
+	/* 2. Observe async-compatible custom_divisor hack, update baudrate
+	   if needed */
 
 	if (baud == 38400 &&
 	    ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (priv->custom_divisor)) {
 		baud = priv->baud_base / priv->custom_divisor;
-		dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud);
+		dbg("%s - custom divisor %d sets baud rate to %d",
+				__func__, priv->custom_divisor, baud);
 	}
 
 	/* 3. Convert baudrate to device-specific divisor */
 
-	if (!baud) baud = 9600;
-	switch(priv->chip_type) {
+	if (!baud)
+		baud = 9600;
+	switch (priv->chip_type) {
 	case SIO: /* SIO chip */
-		switch(baud) {
+		switch (baud) {
 		case 300: div_value = ftdi_sio_b300; break;
 		case 600: div_value = ftdi_sio_b600; break;
 		case 1200: div_value = ftdi_sio_b1200; break;
@@ -905,7 +941,8 @@
 		case 115200: div_value = ftdi_sio_b115200; break;
 		} /* baud */
 		if (div_value == 0) {
-			dbg("%s - Baudrate (%d) requested is not supported", __func__,  baud);
+			dbg("%s - Baudrate (%d) requested is not supported",
+							__func__,  baud);
 			div_value = ftdi_sio_b9600;
 			baud = 9600;
 			div_okay = 0;
@@ -915,7 +952,7 @@
 		if (baud <= 3000000) {
 			div_value = ftdi_232am_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __func__);
+			dbg("%s - Baud rate too high!", __func__);
 			baud = 9600;
 			div_value = ftdi_232am_baud_to_divisor(9600);
 			div_okay = 0;
@@ -927,7 +964,7 @@
 		if (baud <= 3000000) {
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __func__);
+			dbg("%s - Baud rate too high!", __func__);
 			div_value = ftdi_232bm_baud_to_divisor(9600);
 			div_okay = 0;
 			baud = 9600;
@@ -942,14 +979,14 @@
 	}
 
 	tty_encode_baud_rate(tty, baud, baud);
-	return(div_value);
+	return div_value;
 }
 
 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
-        __u16 urb_value;
+	__u16 urb_value;
 	__u16 urb_index;
 	__u32 urb_index_value;
 	int rv;
@@ -978,7 +1015,8 @@
 
 
 
-static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
+static int get_serial_info(struct usb_serial_port *port,
+				struct serial_struct __user *retinfo)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct tmp;
@@ -996,7 +1034,7 @@
 
 
 static int set_serial_info(struct tty_struct *tty,
-	struct usb_serial_port * port, struct serial_struct __user * newinfo)
+	struct usb_serial_port *port, struct serial_struct __user *newinfo)
 { /* set_serial_info */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
@@ -1004,7 +1042,7 @@
 
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 		return -EFAULT;
-	old_priv = * priv;
+	old_priv = *priv;
 
 	/* Do error checking and permission checking */
 
@@ -1025,7 +1063,7 @@
 	/* Make the changes - these are privileged changes! */
 
 	priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
-	               (new_serial.flags & ASYNC_FLAGS));
+					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
 	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
@@ -1079,11 +1117,10 @@
 		priv->chip_type = FT2232C;
 		/* Determine interface code. */
 		inter = serial->interface->altsetting->desc.bInterfaceNumber;
-		if (inter == 0) {
+		if (inter == 0)
 			priv->interface = PIT_SIOA;
-		} else {
+		else
 			priv->interface = PIT_SIOB;
-		}
 		/* BM-type devices have a bug where bcdDevice gets set
 		 * to 0x200 when iSerialNumber is 0.  */
 		if (version < 0x500) {
@@ -1117,7 +1154,8 @@
  * ***************************************************************************
  */
 
-static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_latency_timer(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1126,14 +1164,14 @@
 	int rv = 0;
 
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	rv = usb_control_msg(udev,
 			     usb_rcvctrlpipe(udev, 0),
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
-			     (char*) &latency, 1, WDR_TIMEOUT);
+			     (char *) &latency, 1, WDR_TIMEOUT);
 
 	if (rv < 0) {
 		dev_err(dev, "Unable to read latency timer: %i\n", rv);
@@ -1143,8 +1181,9 @@
 }
 
 /* Write a new value of the latency timer, in units of milliseconds. */
-static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
-				   size_t count)
+static ssize_t store_latency_timer(struct device *dev,
+			struct device_attribute *attr, const char *valbuf,
+			size_t count)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1172,8 +1211,8 @@
 
 /* Write an event character directly to the FTDI register.  The ASCII
    value is in the low 8 bits, with the enable bit in the 9th bit. */
-static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
-				size_t count)
+static ssize_t store_event_char(struct device *dev,
+	struct device_attribute *attr, const char *valbuf, size_t count)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1199,7 +1238,8 @@
 	return count;
 }
 
-static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
+static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
+							store_latency_timer);
 static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
 
 static int create_sysfs_attrs(struct usb_serial_port *port)
@@ -1207,7 +1247,7 @@
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	/* XXX I've no idea if the original SIO supports the event_char
 	 * sysfs parameter, so I'm playing it safe.  */
@@ -1229,7 +1269,7 @@
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	/* XXX see create_sysfs_attrs */
 	if (priv->chip_type != SIO) {
@@ -1250,9 +1290,11 @@
  */
 
 /* Probe function to check for special devices */
-static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
+static int ftdi_sio_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
 {
-	struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info;
+	struct ftdi_sio_quirk *quirk =
+				(struct ftdi_sio_quirk *)id->driver_info;
 
 	if (quirk && quirk->probe) {
 		int ret = quirk->probe(serial);
@@ -1271,17 +1313,18 @@
 	struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
 
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
-	if (!priv){
-		err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private));
+	if (!priv) {
+		err("%s- kmalloc(%Zd) failed.", __func__,
+					sizeof(struct ftdi_private));
 		return -ENOMEM;
 	}
 
 	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
-        init_waitqueue_head(&priv->delta_msr_wait);
+	init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
 	priv->flags = ASYNC_LOW_LATENCY;
@@ -1291,9 +1334,9 @@
 
 	/* Increase the size of read buffers */
 	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
+	port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
 	if (!port->bulk_in_buffer) {
-		kfree (priv);
+		kfree(priv);
 		return -ENOMEM;
 	}
 	if (port->read_urb) {
@@ -1306,7 +1349,7 @@
 
 	/* Free port's existing write urb and transfer buffer. */
 	if (port->write_urb) {
-		usb_free_urb (port->write_urb);
+		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 	}
 	kfree(port->bulk_out_buffer);
@@ -1314,7 +1357,7 @@
 
 	usb_set_serial_port_data(port, priv);
 
-	ftdi_determine_type (port);
+	ftdi_determine_type(port);
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1322,9 +1365,9 @@
 /* Setup for the USB-UIRT device, which requires hardwired
  * baudrate (38400 gets mapped to 312500) */
 /* Called from usbserial:serial_probe */
-static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
+static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 {
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
@@ -1333,9 +1376,10 @@
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
-static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
+
+static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 {
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
@@ -1353,7 +1397,7 @@
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	if (interface == udev->actconfig->interface[0]) {
 		info("Ignoring serial port reserved for JTAG");
@@ -1387,7 +1431,7 @@
  *      calls __serial_close for each open of the port
  *      shutdown is called then (ie ftdi_shutdown)
  */
-static void ftdi_shutdown (struct usb_serial *serial)
+static void ftdi_shutdown(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 }
@@ -1401,7 +1445,7 @@
 	remove_sysfs_attrs(port);
 
 	/* all open ports are closed at this point
-         *    (by usbserial.c:__serial_close, which calls ftdi_close)
+	 *    (by usbserial.c:__serial_close, which calls ftdi_close)
 	 */
 
 	if (priv) {
@@ -1462,12 +1506,14 @@
 	/* Start reading from the device */
 	priv->rx_processed = 0;
 	usb_fill_bulk_urb(port->read_urb, dev,
-		      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      ftdi_read_bulk_callback, port);
+			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
+			port->read_urb->transfer_buffer,
+				port->read_urb->transfer_buffer_length,
+			ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
-		err("%s - failed submitting read urb, error %d", __func__, result);
+		err("%s - failed submitting read urb, error %d",
+							__func__, result);
 
 
 	return result;
@@ -1493,7 +1539,7 @@
 	dbg("%s", __func__);
 
 	mutex_lock(&port->serial->disc_mutex);
-	if (c_cflag & HUPCL && !port->serial->disconnected){
+	if (c_cflag & HUPCL && !port->serial->disconnected) {
 		/* Disable flow control */
 		if (usb_control_msg(port->serial->dev,
 				    usb_sndctrlpipe(port->serial->dev, 0),
@@ -1553,7 +1599,7 @@
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
 	data_offset = priv->write_offset;
-        dbg("data_offset set to %d",data_offset);
+	dbg("data_offset set to %d", data_offset);
 
 	/* Determine total transfer size */
 	transfer_size = count;
@@ -1564,7 +1610,7 @@
 				 (PKTSZ - data_offset)));
 	}
 
-	buffer = kmalloc (transfer_size, GFP_ATOMIC);
+	buffer = kmalloc(transfer_size, GFP_ATOMIC);
 	if (!buffer) {
 		err("%s ran out of kernel memory for urb ...", __func__);
 		count = -ENOMEM;
@@ -1580,20 +1626,20 @@
 
 	/* Copy data */
 	if (data_offset > 0) {
-		/* Original sio requires control byte at start of each packet. */
+		/* Original sio requires control byte at start of
+		   each packet. */
 		int user_pktsz = PKTSZ - data_offset;
 		int todo = count;
 		unsigned char *first_byte = buffer;
 		const unsigned char *current_position = buf;
 
 		while (todo > 0) {
-			if (user_pktsz > todo) {
+			if (user_pktsz > todo)
 				user_pktsz = todo;
-			}
 			/* Write the control byte at the front of the packet*/
 			*first_byte = 1 | ((user_pktsz) << 2);
 			/* Copy data for packet */
-			memcpy (first_byte + data_offset,
+			memcpy(first_byte + data_offset,
 				current_position, user_pktsz);
 			first_byte += user_pktsz + data_offset;
 			current_position += user_pktsz;
@@ -1602,20 +1648,23 @@
 	} else {
 		/* No control byte required. */
 		/* Copy in the data to send */
-		memcpy (buffer, buf, count);
+		memcpy(buffer, buf, count);
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						transfer_size, buffer);
 
 	/* fill the buffer and send it */
 	usb_fill_bulk_urb(urb, port->serial->dev,
-		      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
-		      buffer, transfer_size,
-		      ftdi_write_bulk_callback, port);
+			usb_sndbulkpipe(port->serial->dev,
+					port->bulk_out_endpointAddress),
+			buffer, transfer_size,
+			ftdi_write_bulk_callback, port);
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		err("%s - failed submitting write urb, error %d", __func__, status);
+		err("%s - failed submitting write urb, error %d",
+							__func__, status);
 		count = status;
 		goto error;
 	} else {
@@ -1634,7 +1683,7 @@
 error:
 	usb_free_urb(urb);
 error_no_urb:
-	kfree (buffer);
+	kfree(buffer);
 error_no_buffer:
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	priv->tx_outstanding_urbs--;
@@ -1645,7 +1694,7 @@
 
 /* This function may get called when the device is closed */
 
-static void ftdi_write_bulk_callback (struct urb *urb)
+static void ftdi_write_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
@@ -1655,7 +1704,7 @@
 	int status = urb->status;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree (urb->transfer_buffer);
+	kfree(urb->transfer_buffer);
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1738,9 +1787,11 @@
 	int status = urb->status;
 
 	if (urb->number_of_packets > 0) {
-		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__,
-		    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
-		err("%s transfer_flags %x ", __func__,urb->transfer_flags );
+		err("%s transfer_buffer_length %d actual_length %d number of packets %d",
+				__func__,
+				urb->transfer_buffer_length,
+				urb->actual_length, urb->number_of_packets);
+		err("%s transfer_flags %x ", __func__, urb->transfer_flags);
 	}
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1750,7 +1801,7 @@
 
 	tty = port->port.tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__func__);
+		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
 	}
 
@@ -1760,14 +1811,13 @@
 		return;
 	}
 
-	if (urb != port->read_urb) {
+	if (urb != port->read_urb)
 		err("%s - Not my urb!", __func__);
-	}
 
 	if (status) {
-		/* This will happen at close every time so it is a dbg not an err */
-		dbg("(this is ok on close) nonzero read bulk status received: "
-		    "%d", status);
+		/* This will happen at close every time so it is a dbg not an
+		   err */
+		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
 		return;
 	}
 
@@ -1783,7 +1833,7 @@
 } /* ftdi_read_bulk_callback */
 
 
-static void ftdi_process_read (struct work_struct *work)
+static void ftdi_process_read(struct work_struct *work)
 { /* ftdi_process_read */
 	struct ftdi_private *priv =
 		container_of(work, struct ftdi_private, rx_work.work);
@@ -1806,7 +1856,7 @@
 
 	tty = port->port.tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__func__);
+		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
 	}
 
@@ -1830,11 +1880,11 @@
 				urb->actual_length - priv->rx_processed);
 	} else {
 		/* The first two bytes of every read packet are status */
-		if (urb->actual_length > 2) {
-			usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
-		} else {
-			dbg("Status only: %03oo %03oo",data[0],data[1]);
-		}
+		if (urb->actual_length > 2)
+			usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+		else
+			dbg("Status only: %03oo %03oo", data[0], data[1]);
 	}
 
 
@@ -1844,16 +1894,19 @@
 	/* if CD is dropped and the line is not CLOCAL then we should hangup */
 
 	need_flip = 0;
-	for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+	for (packet_offset = priv->rx_processed;
+		packet_offset < urb->actual_length; packet_offset += PKTSZ) {
 		int length;
 
-		/* Compare new line status to the old one, signal if different */
-		/* N.B. packet may be processed more than once, but differences
-		 * are only processed once.  */
+		/* Compare new line status to the old one, signal if different/
+		   N.B. packet may be processed more than once, but differences
+		   are only processed once.  */
 		if (priv != NULL) {
-			char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
+			char new_status = data[packet_offset + 0] &
+							FTDI_STATUS_B0_MASK;
 			if (new_status != priv->prev_status) {
-				priv->diff_status |= new_status ^ priv->prev_status;
+				priv->diff_status |=
+					new_status ^ priv->prev_status;
 				wake_up_interruptible(&priv->delta_msr_wait);
 				priv->prev_status = new_status;
 			}
@@ -1870,30 +1923,31 @@
 			break;
 		}
 		if (tty_buffer_request_room(tty, length) < length) {
-			/* break out & wait for throttling/unthrottling to happen */
+			/* break out & wait for throttling/unthrottling to
+			   happen */
 			dbg("%s - receive room low", __func__);
 			break;
 		}
 
 		/* Handle errors and break */
 		error_flag = TTY_NORMAL;
-		/* Although the device uses a bitmask and hence can have multiple */
-		/* errors on a packet - the order here sets the priority the */
-		/* error is returned to the tty layer  */
+		/* Although the device uses a bitmask and hence can have
+		   multiple errors on a packet - the order here sets the
+		   priority the error is returned to the tty layer  */
 
-		if ( data[packet_offset+1] & FTDI_RS_OE ) {
+		if (data[packet_offset+1] & FTDI_RS_OE) {
 			error_flag = TTY_OVERRUN;
 			dbg("OVERRRUN error");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_BI ) {
+		if (data[packet_offset+1] & FTDI_RS_BI) {
 			error_flag = TTY_BREAK;
 			dbg("BREAK received");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_PE ) {
+		if (data[packet_offset+1] & FTDI_RS_PE) {
 			error_flag = TTY_PARITY;
 			dbg("PARITY error");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_FE ) {
+		if (data[packet_offset+1] & FTDI_RS_FE) {
 			error_flag = TTY_FRAME;
 			dbg("FRAMING error");
 		}
@@ -1902,7 +1956,8 @@
 				/* Note that the error flag is duplicated for
 				   every character received since we don't know
 				   which character it applied to */
-				tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
+				tty_insert_flip_char(tty,
+					data[packet_offset + i], error_flag);
 			}
 			need_flip = 1;
 		}
@@ -1910,19 +1965,19 @@
 #ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
 		/* if a parity error is detected you get status packets forever
 		   until a character is sent without a parity error.
-		   This doesn't work well since the application receives a never
-		   ending stream of bad data - even though new data hasn't been sent.
-		   Therefore I (bill) have taken this out.
+		   This doesn't work well since the application receives a
+		   never ending stream of bad data - even though new data
+		   hasn't been sent. Therefore I (bill) have taken this out.
 		   However - this might make sense for framing errors and so on
 		   so I am leaving the code in for now.
 		*/
 		else {
-			if (error_flag != TTY_NORMAL){
+			if (error_flag != TTY_NORMAL) {
 				dbg("error_flag is not normal");
-				/* In this case it is just status - if that is an error send a bad character */
-				if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				/* In this case it is just status - if that is
+				   an error send a bad character */
+				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
 					tty_flip_buffer_push(tty);
-				}
 				tty_insert_flip_char(tty, 0xff, error_flag);
 				need_flip = 1;
 			}
@@ -1931,9 +1986,8 @@
 	} /* "for(packet_offset=0..." */
 
 	/* Low latency */
-	if (need_flip) {
+	if (need_flip)
 		tty_flip_buffer_push(tty);
-	}
 
 	if (packet_offset < urb->actual_length) {
 		/* not completely processed - record progress */
@@ -1952,12 +2006,11 @@
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
-		if (port->port.count > 0){
+		if (port->port.count > 0)
 			/* delay processing of remainder */
 			schedule_delayed_work(&priv->rx_work, 1);
-		} else {
+		else
 			dbg("%s - port is closed", __func__);
-		}
 		return;
 	}
 
@@ -1965,19 +2018,20 @@
 	priv->rx_processed = 0;
 
 	/* if the port is closed stop trying to read */
-	if (port->port.count > 0){
+	if (port->port.count > 0) {
 		/* Continue trying to always read  */
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-			      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-			      ftdi_read_bulk_callback, port);
+			usb_rcvbulkpipe(port->serial->dev,
+					port->bulk_in_endpointAddress),
+			port->read_urb->transfer_buffer,
+			port->read_urb->transfer_buffer_length,
+			ftdi_read_bulk_callback, port);
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d", __func__, result);
+			err("%s - failed resubmitting read urb, error %d",
+							__func__, result);
 	}
-
-	return;
 } /* ftdi_process_read */
 
 
@@ -1992,22 +2046,23 @@
 	/* see drivers/char/tty_io.c to see it used */
 	/* last_set_data_urb_value NEVER has the break bit set in it */
 
-	if (break_state) {
+	if (break_state)
 		urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
-	} else {
+	else
 		urb_value = priv->last_set_data_urb_value;
+
+	if (usb_control_msg(port->serial->dev,
+			usb_sndctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_SET_DATA_REQUEST,
+			FTDI_SIO_SET_DATA_REQUEST_TYPE,
+			urb_value , priv->interface,
+			buf, 0, WDR_TIMEOUT) < 0) {
+		err("%s FAILED to enable/disable break state (state was %d)",
+							__func__, break_state);
 	}
 
-
-	if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
-			    FTDI_SIO_SET_DATA_REQUEST,
-			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
-			    urb_value , priv->interface,
-			    buf, 0, WDR_TIMEOUT) < 0) {
-		err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state);
-	}
-
-	dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value);
+	dbg("%s break state is %d - urb is %d", __func__,
+						break_state, urb_value);
 
 }
 
@@ -2027,14 +2082,15 @@
 	__u16 urb_value; /* will hold the new flags */
 	char buf[1]; /* Perhaps I should dynamically alloc this? */
 
-	// Added for xon/xoff support
+	/* Added for xon/xoff support */
 	unsigned int iflag = termios->c_iflag;
 	unsigned char vstop;
 	unsigned char vstart;
 
 	dbg("%s", __func__);
 
-	/* Force baud rate if this device requires it, unless it is set to B0. */
+	/* Force baud rate if this device requires it, unless it is set to
+	   B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
 		dbg("%s: forcing baud rate for this device", __func__);
 		tty_encode_baud_rate(tty, priv->force_baud,
@@ -2053,8 +2109,8 @@
 	   not  - so just do the change regardless  - should be able to
 	   compare old_termios and tty->termios */
 	/* NOTE These routines can get interrupted by
-	   ftdi_sio_read_bulk_callback  - need to examine what this
-           means - don't see any problems yet */
+	   ftdi_sio_read_bulk_callback  - need to examine what this means -
+	   don't see any problems yet */
 
 	/* Set number of data bits, parity, stop bits */
 
@@ -2078,8 +2134,8 @@
 		}
 	}
 
-	/* This is needed by the break command since it uses the same command - but is
-	 *  or'ed with this value  */
+	/* This is needed by the break command since it uses the same command
+	   - but is or'ed with this value  */
 	priv->last_set_data_urb_value = urb_value;
 
 	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2091,7 +2147,7 @@
 	}
 
 	/* Now do the baudrate */
-	if ((cflag & CBAUD) == B0 ) {
+	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
@@ -2104,13 +2160,11 @@
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
-		if (change_speed(tty, port)) {
+		if (change_speed(tty, port))
 			err("%s urb failed to set baudrate", __func__);
-		}
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
-		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) {
+		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-		}
 	}
 
 	/* Set flow control */
@@ -2130,18 +2184,22 @@
 		/*
 		 * Xon/Xoff code
 		 *
-		 * Check the IXOFF status in the iflag component of the termios structure
-		 * if IXOFF is not set, the pre-xon/xoff code is executed.
-		*/
+		 * Check the IXOFF status in the iflag component of the
+		 * termios structure. If IXOFF is not set, the pre-xon/xoff
+		 * code is executed.
+		 */
 		if (iflag & IXOFF) {
-			dbg("%s  request to enable xonxoff iflag=%04x",__func__,iflag);
-			// Try to enable the XON/XOFF on the ftdi_sio
-			// Set the vstart and vstop -- could have been done up above where
-			// a lot of other dereferencing is done but that would be very
-			// inefficient as vstart and vstop are not always needed
+			dbg("%s  request to enable xonxoff iflag=%04x",
+							__func__, iflag);
+			/* Try to enable the XON/XOFF on the ftdi_sio
+			 * Set the vstart and vstop -- could have been done up
+			 * above where a lot of other dereferencing is done but
+			 * that would be very inefficient as vstart and vstop
+			 * are not always needed.
+			 */
 			vstart = termios->c_cc[VSTART];
 			vstop = termios->c_cc[VSTOP];
-			urb_value=(vstop << 8) | (vstart);
+			urb_value = (vstop << 8) | (vstart);
 
 			if (usb_control_msg(dev,
 					    usb_sndctrlpipe(dev, 0),
@@ -2153,8 +2211,9 @@
 				err("urb failed to set to xon/xoff flow control");
 			}
 		} else {
-			/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
-			/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
+			/* else clause to only run if cflag ! CRTSCTS and iflag
+			 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty
+			 * stack - not by device */
 			dbg("%s Turning off hardware flow control", __func__);
 			if (usb_control_msg(dev,
 					    usb_sndctrlpipe(dev, 0),
@@ -2181,32 +2240,35 @@
 	switch (priv->chip_type) {
 	case SIO:
 		/* Request the status from the device */
-		if ((ret = usb_control_msg(port->serial->dev,
-					   usb_rcvctrlpipe(port->serial->dev, 0),
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-					   0, 0,
-					   buf, 1, WDR_TIMEOUT)) < 0 ) {
+		ret = usb_control_msg(port->serial->dev,
+			   usb_rcvctrlpipe(port->serial->dev, 0),
+			   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+			   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+			   0, 0,
+			   buf, 1, WDR_TIMEOUT);
+		if (ret < 0) {
 			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
-			return(ret);
+			return ret;
 		}
 		break;
 	case FT8U232AM:
 	case FT232BM:
 	case FT2232C:
 	case FT232RL:
-		/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
-		   format as the data returned from the in point */
-		if ((ret = usb_control_msg(port->serial->dev,
-					   usb_rcvctrlpipe(port->serial->dev, 0),
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-					   0, priv->interface,
-					   buf, 2, WDR_TIMEOUT)) < 0 ) {
+		/* the 8U232AM returns a two byte value (the sio is a 1 byte
+		   value) - in the same format as the data returned from the in
+		   point */
+		ret = usb_control_msg(port->serial->dev,
+				   usb_rcvctrlpipe(port->serial->dev, 0),
+				   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+				   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+				   0, priv->interface,
+				   buf, 2, WDR_TIMEOUT);
+		if (ret < 0) {
 			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
-			return(ret);
+			return ret;
 		}
 		break;
 	default:
@@ -2221,7 +2283,7 @@
 		priv->last_dtr_rts;
 }
 
-static int ftdi_tiocmset(struct tty_struct *tty, struct file * file,
+static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2230,7 +2292,8 @@
 }
 
 
-static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2241,10 +2304,12 @@
 	switch (cmd) {
 
 	case TIOCGSERIAL: /* gets serial port data */
-		return get_serial_info(port, (struct serial_struct __user *) arg);
+		return get_serial_info(port,
+					(struct serial_struct __user *) arg);
 
 	case TIOCSSERIAL: /* sets serial port data */
-		return set_serial_info(tty, port, (struct serial_struct __user *) arg);
+		return set_serial_info(tty, port,
+					(struct serial_struct __user *) arg);
 
 	/*
 	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
@@ -2263,23 +2328,24 @@
 			else {
 				char diff = priv->diff_status;
 
-				if (diff == 0) {
+				if (diff == 0)
 					return -EIO; /* no change => error */
-				}
 
 				/* Consume all events */
 				priv->diff_status = 0;
 
-				/* Return 0 if caller wanted to know about these bits */
-				if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
-				     ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
-				     ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
-				     ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) {
+				/* Return 0 if caller wanted to know about
+				   these bits */
+				if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
+				    ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
+				    ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
+				    ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
 					return 0;
 				}
 				/*
-				 * Otherwise caller can't care less about what happened,
-				 * and so we continue to wait for more events.
+				 * Otherwise caller can't care less about what
+				 * happened,and so we continue to wait for more
+				 * events.
 				 */
 			}
 		}
@@ -2287,8 +2353,8 @@
 	default:
 		break;
 	}
-	/* This is not necessarily an error - turns out the higher layers will do
-	 *  some ioctls itself (see comment above)
+	/* This is not necessarily an error - turns out the higher layers
+	 * will do some ioctls themselves (see comment above)
 	 */
 	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
 	return -ENOIOCTLCMD;
@@ -2326,7 +2392,7 @@
 		schedule_delayed_work(&priv->rx_work, 0);
 }
 
-static int __init ftdi_init (void)
+static int __init ftdi_init(void)
 {
 	int retval;
 
@@ -2356,13 +2422,13 @@
 }
 
 
-static void __exit ftdi_exit (void)
+static void __exit ftdi_exit(void)
 {
 
 	dbg("%s", __func__);
 
-	usb_deregister (&ftdi_driver);
-	usb_serial_deregister (&ftdi_sio_device);
+	usb_deregister(&ftdi_driver);
+	usb_serial_deregister(&ftdi_sio_device);
 
 }
 
@@ -2370,8 +2436,8 @@
 module_init(ftdi_init);
 module_exit(ftdi_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);