| if ARCH_MSM |
| |
| menu "MSM SoC Type" |
| |
| config ARCH_MSM7X01A |
| bool "MSM7x00A / MSM7x01A" |
| select ARCH_MSM_ARM11 |
| select MSM_VIC |
| select CPU_V6 |
| select GPIO_MSM_V1 |
| select MSM_REMOTE_SPINLOCK_SWP |
| |
| config ARCH_MSM7X25 |
| bool "MSM7x25" |
| select ARCH_MSM_ARM11 |
| select MSM_VIC |
| select CPU_V6 |
| select GPIO_MSM_V1 |
| select MSM_REMOTE_SPINLOCK_SWP |
| select MULTI_IRQ_HANDLER |
| |
| config ARCH_MSM7X27 |
| bool "MSM7x27" |
| select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE |
| select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE |
| select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A |
| select MSM_VIC |
| select CPU_V6 if MSM_SOC_REV_NONE |
| select CPU_V7 if MSM_SOC_REV_A |
| select GPIO_MSM_V1 |
| select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE |
| select MSM_GPIOMUX |
| select REGULATOR |
| select MULTI_IRQ_HANDLER |
| select MSM_PROC_COMM_REGULATOR |
| select CLEANCACHE |
| select QCACHE |
| select MSM_PM2 if PM |
| select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A |
| select DONT_MAP_HOLE_AFTER_MEMBANK0 |
| select MIGHT_HAVE_CACHE_L2X0 |
| select MSM_MODEM_RESTART |
| |
| config ARCH_MSM7X30 |
| bool "MSM7x30" |
| select ARCH_MSM_SCORPION |
| select MSM_VIC |
| select CPU_V7 |
| select GPIO_MSM_V1 |
| select MSM_REMOTE_SPINLOCK_DEKKERS |
| select ARCH_SPARSEMEM_ENABLE |
| select ARCH_HAS_HOLES_MEMORYMODEL |
| select MEMORY_HOTPLUG |
| select MEMORY_HOTREMOVE |
| select ARCH_ENABLE_MEMORY_HOTPLUG |
| select ARCH_ENABLE_MEMORY_HOTREMOVE |
| select MIGRATION |
| select ARCH_MEMORY_PROBE |
| select ARCH_MEMORY_REMOVE |
| select MSM_GPIOMUX |
| select RESERVE_FIRST_PAGE |
| select MSM_DALRPC |
| select MSM_SPM_V1 |
| select REGULATOR |
| select MSM_PROC_COMM_REGULATOR |
| select MULTI_IRQ_HANDLER |
| select MSM_PM2 if PM |
| select HOLES_IN_ZONE if SPARSEMEM |
| select MSM_MODEM_RESTART |
| |
| config ARCH_QSD8X50 |
| bool "QSD8X50" |
| select ARCH_MSM_SCORPION |
| select MSM_VIC |
| select CPU_V7 |
| select GPIO_MSM_V1 |
| select MSM_REMOTE_SPINLOCK_LDREX |
| select CPU_USE_DOMAINS |
| select EMULATE_DOMAIN_MANAGER_V7 |
| select MSM_GPIOMUX |
| select MSM_DALRPC |
| select MSM_PM2 if PM |
| select MSM_MODEM_RESTART |
| |
| config ARCH_MSM8X60 |
| bool "MSM8X60" |
| select ARCH_MSM_SCORPIONMP |
| select SMP_PARALLEL_START if SMP |
| select ARM_GIC |
| select CPU_V7 |
| select MSM_REMOTE_SPINLOCK_LDREX |
| select ARCH_REQUIRE_GPIOLIB |
| select MSM_ADM3 |
| select REGULATOR |
| select MSM_RPM_REGULATOR |
| select GPIO_MSM_V2 |
| select MSM_PIL |
| select ARCH_HAS_CPU_IDLE_WAIT |
| select MSM_DIRECT_SCLK_ACCESS |
| select MSM_RPM |
| select MSM_XO |
| select MSM_GPIOMUX |
| select MSM_BUS_SCALING |
| select MSM_SECURE_IO |
| select MSM_DALRPC |
| select MSM_QDSP6_APR |
| select MSM_QDSP6_CODECS |
| select MSM_NATIVE_RESTART |
| select ARCH_INLINE_SPIN_TRYLOCK |
| select ARCH_INLINE_SPIN_TRYLOCK_BH |
| select ARCH_INLINE_SPIN_LOCK |
| select ARCH_INLINE_SPIN_LOCK_BH |
| select ARCH_INLINE_SPIN_LOCK_IRQ |
| select ARCH_INLINE_SPIN_LOCK_IRQSAVE |
| select ARCH_INLINE_SPIN_UNLOCK |
| select ARCH_INLINE_SPIN_UNLOCK_BH |
| select ARCH_INLINE_SPIN_UNLOCK_IRQ |
| select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE |
| select ARCH_INLINE_READ_TRYLOCK |
| select ARCH_INLINE_READ_LOCK |
| select ARCH_INLINE_READ_LOCK_BH |
| select ARCH_INLINE_READ_LOCK_IRQ |
| select ARCH_INLINE_READ_LOCK_IRQSAVE |
| select ARCH_INLINE_READ_UNLOCK |
| select ARCH_INLINE_READ_UNLOCK_BH |
| select ARCH_INLINE_READ_UNLOCK_IRQ |
| select ARCH_INLINE_READ_UNLOCK_IRQRESTORE |
| select ARCH_INLINE_WRITE_TRYLOCK |
| select ARCH_INLINE_WRITE_LOCK |
| select ARCH_INLINE_WRITE_LOCK_BH |
| select ARCH_INLINE_WRITE_LOCK_IRQ |
| select ARCH_INLINE_WRITE_LOCK_IRQSAVE |
| select ARCH_INLINE_WRITE_UNLOCK |
| select ARCH_INLINE_WRITE_UNLOCK_BH |
| select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE |
| select CPU_HAS_L2_PMU |
| select MSM_SPM_V1 |
| select MSM_SCM if SMP |
| select MULTI_IRQ_HANDLER |
| select MSM_MULTIMEDIA_USE_ION |
| select MSM_PM8X60 if PM |
| select MSM_RUN_QUEUE_STATS |
| select ARM_HAS_SG_CHAIN |
| |
| config ARCH_MSM8960 |
| bool "MSM8960" |
| select ARCH_MSM_KRAITMP |
| select ARM_GIC |
| select CPU_V7 |
| select GPIO_MSM_V2 |
| select MSM_GPIOMUX |
| select MSM_SCM if SMP |
| select MSM_DIRECT_SCLK_ACCESS |
| select REGULATOR |
| select MSM_RPM_REGULATOR |
| select MSM_RPM |
| select MSM_XO |
| select MSM_QDSP6_APR |
| select MSM_QDSP6_CODECS |
| select MSM_PIL |
| select MSM_AUDIO_QDSP6 if SND_SOC |
| select CPU_HAS_L2_PMU |
| select MSM_SPM_V2 |
| select MSM_L2_SPM |
| select MSM_NATIVE_RESTART |
| select DONT_MAP_HOLE_AFTER_MEMBANK0 |
| select MSM_REMOTE_SPINLOCK_SFPB |
| select ARCH_SPARSEMEM_ENABLE |
| select ARCH_HAS_HOLES_MEMORYMODEL |
| select CLEANCACHE |
| select QCACHE |
| select MSM_MULTIMEDIA_USE_ION |
| select MULTI_IRQ_HANDLER |
| select MSM_PM8X60 if PM |
| select HOLES_IN_ZONE if SPARSEMEM |
| select MSM_RUN_QUEUE_STATS |
| select ARM_HAS_SG_CHAIN |
| select MSM_KRAIT_WFE_FIXUP |
| |
| config ARCH_MSM8930 |
| bool "MSM8930" |
| select ARCH_MSM_KRAITMP |
| select ARM_GIC |
| select CPU_V7 |
| select GPIO_MSM_V2 |
| select MSM_GPIOMUX |
| select MSM_SCM if SMP |
| select MSM_DIRECT_SCLK_ACCESS |
| select REGULATOR |
| select MSM_RPM_REGULATOR |
| select MSM_RPM |
| select MSM_XO |
| select MSM_QDSP6_APR |
| select MSM_QDSP6_CODECS |
| select MSM_PIL |
| select MSM_AUDIO_QDSP6 if SND_SOC |
| select CPU_HAS_L2_PMU |
| select MSM_SPM_V2 |
| select MSM_L2_SPM |
| select MSM_NATIVE_RESTART |
| select DONT_MAP_HOLE_AFTER_MEMBANK0 |
| select MSM_REMOTE_SPINLOCK_SFPB |
| select ARCH_SPARSEMEM_ENABLE |
| select ARCH_HAS_HOLES_MEMORYMODEL |
| select MSM_ULTRASOUND |
| select MULTI_IRQ_HANDLER |
| select MSM_PM8X60 if PM |
| select HOLES_IN_ZONE if SPARSEMEM |
| select ARM_HAS_SG_CHAIN |
| select MSM_KRAIT_WFE_FIXUP |
| |
| config ARCH_APQ8064 |
| bool "APQ8064" |
| select ARCH_MSM_KRAITMP |
| select GPIO_MSM_V2 |
| select ARM_GIC |
| select CPU_V7 |
| select MSM_SCM if SMP |
| select MSM_GPIOMUX |
| select MSM_REMOTE_SPINLOCK_SFPB |
| select MSM_PIL |
| select MSM_QDSP6_APR |
| select MSM_QDSP6_CODECS |
| select MSM_AUDIO_QDSP6 if SND_SOC |
| select MULTI_IRQ_HANDLER |
| select MSM_RPM |
| select MSM_SPM_V2 |
| select MSM_L2_SPM |
| select MSM_PM8X60 if PM |
| select CPU_HAS_L2_PMU |
| select HOLES_IN_ZONE if SPARSEMEM |
| select CLEANCACHE |
| select QCACHE |
| select MIGHT_HAVE_PCI |
| select ARCH_SUPPORTS_MSI |
| select ARM_HAS_SG_CHAIN |
| select MSM_KRAIT_WFE_FIXUP |
| |
| config ARCH_MSM8974 |
| bool "MSM8974" |
| select ARCH_MSM_KRAITMP |
| select GPIO_MSM_V3 |
| select ARM_GIC |
| select CPU_V7 |
| select MSM_SCM if SMP |
| select MSM_GPIOMUX |
| select MULTI_IRQ_HANDLER |
| select MSM_MULTIMEDIA_USE_ION |
| select MSM_PIL |
| select MSM_SPM_V2 |
| select MSM_L2_SPM |
| select MSM_NATIVE_RESTART |
| select MSM_RESTART_V2 |
| select MSM_PM8X60 if PM |
| select MAY_HAVE_SPARSE_IRQ |
| select SPARSE_IRQ |
| select MSM_RPM_SMD |
| select REGULATOR |
| select MSM_QDSP6_APRV2 |
| select MSM_QDSP6V2_CODECS |
| select MSM_AUDIO_QDSP6V2 if SND_SOC |
| select MSM_RPM_REGULATOR_SMD |
| select ARM_HAS_SG_CHAIN |
| select MSM_RUN_QUEUE_STATS |
| |
| config ARCH_MPQ8092 |
| bool "MPQ8092" |
| select ARCH_MSM_KRAITMP |
| select GPIO_MSM_V3 |
| select ARM_GIC |
| select MULTI_IRQ_HANDLER |
| select CPU_V7 |
| select MSM_GPIOMUX |
| select MAY_HAVE_SPARSE_IRQ |
| select SPARSE_IRQ |
| select MSM_NOPM |
| |
| config ARCH_MSM8226 |
| bool "MSM8226" |
| select ARCH_MSM_KRAITMP |
| select GPIO_MSM_V3 |
| select ARM_GIC |
| select CPU_V7 |
| select MSM_SCM if SMP |
| select MSM_GPIOMUX |
| select MULTI_IRQ_HANDLER |
| select MSM_MULTIMEDIA_USE_ION |
| select MSM_PIL |
| select MSM_SPM_V2 |
| select MSM_L2_SPM |
| select MSM_PM8X60 if PM |
| select MAY_HAVE_SPARSE_IRQ |
| select SPARSE_IRQ |
| select MSM_RPM_SMD |
| select REGULATOR |
| select MSM_QDSP6_APRV2 |
| select MSM_QDSP6V2_CODECS |
| select MSM_AUDIO_QDSP6V2 if SND_SOC |
| select MSM_RPM_REGULATOR_SMD |
| select ARM_HAS_SG_CHAIN |
| |
| config ARCH_FSM9XXX |
| bool "FSM9XXX" |
| select ARCH_MSM_SCORPION |
| select MSM_VIC |
| select CPU_V7 |
| select MSM_REMOTE_SPINLOCK_LDREX |
| select GPIO_FSM9XXX |
| select MULTI_IRQ_HANDLER |
| select MSM_DALRPC |
| |
| config ARCH_MSM9615 |
| bool "MSM9615" |
| select ARM_GIC |
| select GIC_SECURE |
| select ARCH_MSM_CORTEX_A5 |
| select CPU_V7 |
| select GPIO_MSM_V2 |
| select MSM_GPIOMUX |
| select MSM_RPM |
| select MSM_SPM_V2 |
| select MSM_NATIVE_RESTART |
| select REGULATOR |
| select MSM_RPM_REGULATOR |
| select MULTI_IRQ_HANDLER |
| select MSM_PM8X60 if PM |
| select MSM_XO |
| select MSM_MULTIMEDIA_USE_ION |
| select MSM_QDSP6_APR |
| select MSM_AUDIO_QDSP6 if SND_SOC |
| select FIQ |
| select ARM_HAS_SG_CHAIN |
| |
| config ARCH_MSM8625 |
| bool "MSM8625" |
| select ARCH_MSM_CORTEX_A5 |
| select CPU_V7 |
| select GPIO_MSM_V1 |
| select MSM_GPIOMUX |
| select ARM_GIC |
| select ARCH_MSM_CORTEXMP |
| select MULTI_IRQ_HANDLER |
| select ARM_TICKET_LOCKS |
| select MSM_RUN_QUEUE_STATS |
| select MIGHT_HAVE_CACHE_L2X0 |
| select ARM_HAS_SG_CHAIN |
| |
| config ARCH_MSM9625 |
| bool "MSM9625" |
| select ARM_GIC |
| select GIC_SECURE |
| select MIGHT_HAVE_CACHE_L2X0 |
| select ARCH_MSM_CORTEX_A5 |
| select SMP |
| select MSM_SMP |
| select CPU_V7 |
| select MSM_GPIOMUX |
| select MULTI_IRQ_HANDLER |
| select GPIO_MSM_V3 |
| select MAY_HAVE_SPARSE_IRQ |
| select SPARSE_IRQ |
| endmenu |
| |
| choice |
| prompt "MSM SoC Revision" |
| default MSM_SOC_REV_NONE |
| config MSM_SOC_REV_NONE |
| bool "N/A" |
| select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50 |
| select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50 |
| config MSM_SOC_REV_A |
| bool "Rev. A" |
| select ARCH_MSM7X27A if ARCH_MSM7X27 |
| endchoice |
| |
| config MSM_KRAIT_TBB_ABORT_HANDLER |
| bool "Krait TBB/TBH data abort handler" |
| depends on ARCH_MSM_KRAIT |
| depends on ARM_THUMB |
| help |
| Certain early samples of the Krait processor may generate data |
| aborts for TBB / TBH instructions that fail their condition code |
| checks. Enabling this option will ignore these erroneous data aborts, |
| at the expense of a very small performance penalty. |
| |
| If unsure, say N. |
| |
| config ARCH_MSM_ARM11 |
| bool |
| |
| config ARCH_MSM_SCORPION |
| bool |
| |
| config ARCH_MSM_KRAIT |
| bool |
| select ARM_L1_CACHE_SHIFT_6 |
| |
| config MSM_SMP |
| select HAVE_SMP |
| bool |
| |
| config ARCH_MSM_SCORPIONMP |
| select ARCH_MSM_SCORPION |
| select MSM_SMP |
| select HAVE_ARCH_HAS_CURRENT_TIMER |
| select MSM_JTAG if MSM_QDSS |
| bool |
| |
| config ARCH_MSM_KRAITMP |
| select ARCH_MSM_KRAIT |
| select MSM_SMP |
| select HAVE_ARCH_HAS_CURRENT_TIMER |
| select MSM_JTAG if MSM_QDSS |
| bool |
| |
| config ARCH_MSM_CORTEXMP |
| select MSM_SMP |
| bool |
| |
| config MSM_KRAIT_WFE_FIXUP |
| bool |
| |
| config MSM_RESTART_V2 |
| bool |
| |
| config ARCH_MSM_CORTEX_A5 |
| bool |
| |
| config ARCH_MSM7X27A |
| bool |
| select MSM_DALRPC |
| select MSM_PROC_COMM_REGULATOR |
| select MULTI_IRQ_HANDLER |
| select ARM_GIC |
| select ARCH_MSM_CORTEXMP |
| select MIGHT_HAVE_CACHE_L2X0 |
| select ARM_HAS_SG_CHAIN |
| |
| config MSM_VIC |
| bool |
| |
| config MSM_RPM |
| bool "Resource Power Manager" |
| select MSM_MPM |
| |
| config MSM_RPM_SMD |
| depends on MSM_SMD |
| select MSM_MPM_OF |
| bool "RPM driver using SMD protocol" |
| help |
| RPM is the dedicated hardware engine for managing shared SoC |
| resources. This config adds driver support for using SMD as a |
| transport layer communication with RPM hardware. It also selects |
| the MSM_MPM config that programs the MPM module to monitor interrupts |
| during sleep modes. |
| |
| config MSM_MPM |
| bool "Modem Power Manager" |
| help |
| MPM is a dedicated hardware resource responsible for entering and |
| waking up from a system wide low power mode. The MPM driver tracks |
| the wakeup interrupts and configures the MPM to monitor the wakeup |
| interrupts when going to a system wide sleep mode. |
| |
| config MSM_MPM_OF |
| bool "Modem Power Manager" |
| depends on CONFIG_OF |
| help |
| MPM is a dedicated hardware resource responsible for entering and |
| waking up from a system wide low power mode. The MPM driver tracks |
| the wakeup interrupts and configures the MPM to monitor the wakeup |
| interrupts when going to a system wide sleep mode. This config option |
| enables the MPM driver that supports initialization from a device |
| tree |
| |
| config MSM_XO |
| bool |
| |
| config MSM_REMOTE_SPINLOCK_DEKKERS |
| bool |
| config MSM_REMOTE_SPINLOCK_SWP |
| bool |
| config MSM_REMOTE_SPINLOCK_LDREX |
| bool |
| config MSM_REMOTE_SPINLOCK_SFPB |
| bool |
| config MSM_ADM3 |
| bool |
| |
| menu "MSM Board Selection" |
| |
| config MACH_HALIBUT |
| depends on ARCH_MSM7X01A |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "Halibut Board (QCT SURF7201A)" |
| help |
| Support for the Qualcomm SURF7201A eval board. |
| |
| config MACH_MSM7201A_SURF |
| depends on ARCH_MSM7X01A |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "MSM7201A SURF" |
| help |
| Support for the Qualcomm MSM7201A SURF eval board. |
| |
| config MACH_MSM7201A_FFA |
| depends on ARCH_MSM7X01A |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "MSM7201A FFA" |
| help |
| Support for the Qualcomm MSM7201A FFA eval board. |
| |
| config MACH_TROUT |
| depends on ARCH_MSM7X01A |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "Trout" |
| |
| config MACH_MSM7X27_SURF |
| depends on ARCH_MSM7X27 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x27 SURF" |
| help |
| Support for the Qualcomm MSM7x27 SURF eval board. |
| |
| config MACH_MSM7X27_FFA |
| depends on ARCH_MSM7X27 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x27 FFA" |
| help |
| Support for the Qualcomm MSM7x27 FFA eval board. |
| |
| config MACH_MSM7X27A_RUMI3 |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x27A RUMI3" |
| help |
| Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform. |
| |
| config MACH_MSM7X27A_SURF |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x27A SURF" |
| help |
| Support for the Qualcomm MSM7x27A SURF. |
| |
| config MACH_MSM7X27A_FFA |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x27A FFA" |
| help |
| Support for the Qualcomm MSM7x27A FFA. |
| |
| config MACH_MSM7625A_SURF |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7625A SURF" |
| help |
| Support for the Qualcomm MSM7625A SURF. |
| |
| config MACH_MSM7625A_FFA |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7625A FFA" |
| help |
| Support for the Qualcomm MSM7625A FFA. |
| |
| config MACH_MSM7627A_QRD1 |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7627A QRD1" |
| help |
| Support for the Qualcomm MSM7627A Reference Design. |
| |
| config MACH_MSM7627A_QRD3 |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7627A QRD3" |
| help |
| Support for the Qualcomm MSM7627A Reference Design. |
| |
| config MACH_MSM7627A_EVB |
| depends on ARCH_MSM7X27A |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7627A EVB" |
| help |
| Support for the Qualcomm MSM7627A Reference Design. |
| |
| config MACH_MSM8625_RUMI3 |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 RUMI3" |
| help |
| Support for the Qualcomm MSM8625 RUMI3 Emulation Platform. |
| |
| config MACH_MSM8625_SURF |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 SURF" |
| help |
| Support for the Qualcomm MSM8625 SURF. |
| |
| config MACH_MSM8625_FFA |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 FFA" |
| help |
| Support for the Qualcomm MSM8625 FFA. |
| |
| config MACH_MSM8625_EVB |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 EVB" |
| help |
| Support for the Qualcomm MSM8625 Reference Design. |
| |
| config MACH_MSM8625_QRD7 |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 QRD7" |
| help |
| Support for the Qualcomm MSM8625 Reference Design. |
| |
| config MACH_MSM8625_EVT |
| depends on ARCH_MSM8625 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8625 EVT" |
| help |
| Support for the Qualcomm MSM8625 Reference Design. |
| |
| config MACH_MSM7X30_SURF |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x30 SURF" |
| help |
| Support for the Qualcomm MSM7x30 SURF eval board. |
| |
| config MACH_MSM7X30_FFA |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x30 FFA" |
| help |
| Support for the Qualcomm MSM7x30 FFA eval board. |
| |
| config MACH_MSM7X30_FLUID |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x30 FLUID" |
| help |
| Support for the Qualcomm MSM7x30 FLUID eval board. |
| |
| config MACH_SAPPHIRE |
| depends on ARCH_MSM7X01A |
| default n |
| bool "Sapphire" |
| |
| config MACH_QSD8X50_SURF |
| depends on ARCH_QSD8X50 |
| depends on MSM_SOC_REV_NONE |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "QSD8x50 SURF" |
| help |
| Support for the Qualcomm QSD8x50 SURF eval board. |
| |
| config MACH_QSD8X50_FFA |
| depends on ARCH_QSD8X50 |
| depends on MSM_SOC_REV_NONE |
| depends on MSM_STACKED_MEMORY |
| default y |
| bool "QSD8x50 FFA" |
| help |
| Support for the Qualcomm QSD8x50 FFA eval board. |
| |
| config MACH_MSM7X25_SURF |
| depends on ARCH_MSM7X25 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x25 SURF" |
| help |
| Support for the Qualcomm MSM7x25 SURF eval board. |
| |
| config MACH_MSM7X25_FFA |
| depends on ARCH_MSM7X25 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM7x25 FFA" |
| help |
| Support for the Qualcomm MSM7x25 FFA eval board. |
| |
| config MACH_MSM8X55_SURF |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8X55 SURF" |
| help |
| Support for the Qualcomm MSM8x55 SURF eval board. |
| |
| config MACH_MSM8X55_FFA |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8X55 FFA" |
| help |
| Support for the Qualcomm MSM8x55 FFA eval board. |
| |
| config MACH_MSM8X55_SVLTE_FFA |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8X55 SVLTE FFA" |
| help |
| Support for the Qualcomm MSM8x55 SVLTE FFA eval board. |
| |
| config MACH_MSM8X55_SVLTE_SURF |
| depends on ARCH_MSM7X30 |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "MSM8X55 SVLTE SURF" |
| help |
| Support for the Qualcomm MSM8x55 SVLTE SURF eval board. |
| |
| config MACH_MSM8X60_SURF |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 SURF" |
| help |
| Support for the Qualcomm MSM8x60 SURF eval board. |
| |
| config MACH_MSM8X60_FFA |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 FFA" |
| help |
| Support for the Qualcomm MSM8x60 FFA eval board. |
| |
| config MACH_MSM8X60_FLUID |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 FLUID" |
| help |
| Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an |
| 8x60 target which has a form factor that is much closer to that |
| of a phone than other targets. It also has a new display and |
| touchscreen controller. |
| |
| config MACH_MSM8X60_FUSION |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 FUSION" |
| help |
| Support for the Qualcomm MSM8x60 Fusion SURF device. |
| |
| config MACH_MSM8X60_FUSN_FFA |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 FUSN FFA" |
| help |
| Support for the Qualcomm MSM8x60 Fusion FFA device. |
| |
| config MACH_MSM8X60_DRAGON |
| depends on ARCH_MSM8X60 |
| default n |
| bool "MSM8x60 DRAGON" |
| help |
| Support for the Qualcomm MSM8x60 Dragon board. |
| |
| config MACH_MSM8960_CDP |
| depends on ARCH_MSM8960 |
| bool "MSM8960 CDP" |
| help |
| Support for the Qualcomm MSM8960 CDP device. |
| |
| config MACH_MSM8960_MTP |
| depends on ARCH_MSM8960 |
| bool "MSM8960 MTP" |
| help |
| Support for the Qualcomm MSM8960 MTP device. |
| |
| config MACH_MSM8960_FLUID |
| depends on ARCH_MSM8960 |
| bool "MSM8960 FLUID" |
| help |
| Support for the Qualcomm MSM8960 FLUID device. |
| |
| config MACH_MSM8960_LIQUID |
| depends on ARCH_MSM8960 |
| bool "MSM8960 LIQUID" |
| help |
| Support for the Qualcomm MSM8960 LIQUID device. |
| |
| config MACH_MSM8930_CDP |
| depends on ARCH_MSM8930 |
| bool "MSM8930 CDP" |
| help |
| Support for the Qualcomm MSM8930 CDP device. |
| |
| config MACH_MSM8930_MTP |
| depends on ARCH_MSM8930 |
| bool "MSM8930 MTP" |
| help |
| Support for the Qualcomm MSM8930 MTP device. |
| |
| config MACH_MSM8930_FLUID |
| depends on ARCH_MSM8930 |
| bool "MSM8930 FLUID" |
| help |
| Support for the Qualcomm MSM8930 FLUID device. |
| |
| config MACH_MSM8627_CDP |
| depends on ARCH_MSM8930 |
| bool "MSM8627 CDP" |
| help |
| Support for the Qualcomm MSM8627 CDP device. |
| |
| config MACH_MSM8627_MTP |
| depends on ARCH_MSM8930 |
| bool "MSM8627 MTP" |
| help |
| Support for the Qualcomm MSM8627 MTP device. |
| |
| config MACH_MSM9615_CDP |
| depends on ARCH_MSM9615 |
| bool "MSM9615 CDP" |
| help |
| Support for the Qualcomm MSM9615 CDP device. |
| |
| config MACH_MSM9615_MTP |
| depends on ARCH_MSM9615 |
| bool "MSM9615 MTP" |
| help |
| Support for the Qualcomm MSM9615 MTP device. |
| |
| config MSM_USE_TSIF1 |
| depends on ARCH_MSM8X60 |
| bool "MSM8x60 use TSIF1" |
| help |
| Selects TSIF1 core to be used rather than TSIF0. |
| The two TSIF cores share the same DM configuration |
| so they cannot be used simultaneously. |
| |
| config MACH_APQ8064_CDP |
| depends on ARCH_APQ8064 |
| bool "APQ8064 CDP" |
| help |
| Support for the Qualcomm APQ8064 CDP device. |
| |
| config MACH_APQ8064_MTP |
| depends on ARCH_APQ8064 |
| bool "APQ8064 MTP" |
| help |
| Support for the Qualcomm APQ8064 MTP device. |
| |
| config MACH_APQ8064_LIQUID |
| depends on ARCH_APQ8064 |
| bool "APQ8064 LIQUID" |
| help |
| Support for the Qualcomm APQ8064 LIQUID device. |
| |
| config MACH_MPQ8064_CDP |
| depends on ARCH_APQ8064 |
| bool "MPQ8064 CDP" |
| help |
| Support for the Qualcomm MPQ8064 CDP device. |
| |
| config MACH_MPQ8064_HRD |
| depends on ARCH_APQ8064 |
| bool "MPQ8064 HRD" |
| help |
| Support for the Qualcomm MPQ8064 HRD device. |
| |
| config MACH_MPQ8064_DTV |
| depends on ARCH_APQ8064 |
| bool "MPQ8064 DTV" |
| help |
| Support for the Qualcomm MPQ8064 DTV device. |
| |
| config MACH_FSM9XXX_SURF |
| depends on ARCH_FSM9XXX |
| depends on !MSM_STACKED_MEMORY |
| default y |
| bool "FSM9XXX SURF" |
| help |
| Support for the Qualcomm FSM9xxx femtocell |
| chipset based SURF evaluation board and |
| FFA board. |
| |
| endmenu |
| |
| config MSM_STACKED_MEMORY |
| bool "Stacked Memory" |
| default y |
| help |
| This option is used to indicate the presence of on-die stacked |
| memory. When present this memory bank is used for a high speed |
| shared memory interface. When not present regular RAM is used. |
| |
| config PHYS_OFFSET |
| hex |
| default "0x40800000" if ARCH_MSM9615 |
| default "0x80200000" if ARCH_APQ8064 |
| default "0x80200000" if ARCH_MSM8960 |
| default "0x80200000" if ARCH_MSM8930 |
| default "0x00000000" if ARCH_MSM8974 |
| default "0x00000000" if ARCH_MPQ8092 |
| default "0x00000000" if ARCH_MSM8226 |
| default "0x10000000" if ARCH_FSM9XXX |
| default "0x00200000" if ARCH_MSM9625 |
| default "0x00200000" if !MSM_STACKED_MEMORY |
| default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A |
| default "0x20000000" if ARCH_QSD8X50 |
| default "0x40200000" if ARCH_MSM8X60 |
| default "0x10000000" |
| |
| config KERNEL_MSM_CONTIG_MEM_REGION |
| bool "Enable in-kernel contiguous memory region" |
| default y if ARCH_MSM8X60 |
| depends on ANDROID_PMEM && (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974) |
| help |
| Enable the in-kernel contiguous memory allocator. Sets up a |
| region of physically contiguous memory. This memory is |
| reserved during initialization, and can be used |
| generically. |
| |
| config KERNEL_PMEM_SMI_REGION |
| bool "Enable in-kernel PMEM region for SMI" |
| default y if ARCH_MSM8X60 |
| depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM)) |
| help |
| Enable the in-kernel PMEM allocator to use SMI memory. |
| |
| config PMEM_GPU0 |
| bool "Enable PMEM GPU0 region" |
| default y |
| depends on ARCH_QSD8X50 && ANDROID_PMEM |
| help |
| Enable the PMEM GPU0 device on SMI Memory. |
| |
| config MSM_AMSS_VERSION |
| int |
| default 6210 if MSM_AMSS_VERSION_6210 |
| default 6220 if MSM_AMSS_VERSION_6220 |
| default 6225 if MSM_AMSS_VERSION_6225 |
| |
| choice |
| prompt "AMSS modem firmware version" |
| |
| default MSM_AMSS_VERSION_6225 |
| |
| config MSM_AMSS_VERSION_6210 |
| bool "6.2.10" |
| |
| config MSM_AMSS_VERSION_6220 |
| bool "6.2.20" |
| |
| config MSM_AMSS_VERSION_6225 |
| bool "6.2.20 + New ADSP" |
| endchoice |
| |
| config MSM_HAS_DEBUG_UART_HS |
| bool |
| help |
| Say Y here if high speed MSM UART is present. |
| |
| config MSM_HAS_DEBUG_UART_HS_V14 |
| bool |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if high speed MSM UART v1.4 is present. |
| |
| config MSM_DEBUG_UART_PHYS |
| hex |
| default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1 |
| default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1 |
| default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1 |
| default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2 |
| default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2 |
| default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2 |
| default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3 |
| default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3 |
| |
| choice |
| prompt "Debug UART" |
| depends on DEBUG_LL |
| |
| config DEBUG_MSM_UART1 |
| bool "Kernel low-level debugging messages via MSM UART1" |
| depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on MSM devices. |
| |
| config DEBUG_MSM_UART2 |
| bool "Kernel low-level debugging messages via MSM UART2" |
| depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on MSM devices. |
| |
| config DEBUG_MSM_UART3 |
| bool "Kernel low-level debugging messages via MSM UART3" |
| depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the third serial port on MSM devices. |
| |
| config DEBUG_MSM8660_UART |
| bool "Kernel low-level debugging messages via MSM 8660 UART" |
| depends on ARCH_MSM8X60 |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8660 devices. |
| |
| config DEBUG_MSM8960_UART |
| bool "Kernel low-level debugging messages via MSM 8960 UART" |
| depends on ARCH_MSM8960 && DEBUG_LL |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8960 devices. |
| |
| config DEBUG_MSM8930_UART |
| bool "Kernel low-level debugging messages via MSM 8930 UART" |
| depends on ARCH_MSM8930 && DEBUG_LL |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8930 devices. |
| |
| config DEBUG_APQ8064_UART |
| bool "Kernel low-level debugging messages via APQ 8064 UART" |
| depends on ARCH_APQ8064 && DEBUG_LL |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on APQ 8064 devices. |
| |
| config DEBUG_MSM8974_UART |
| bool "Kernel low-level debugging messages via MSM 8974 UART" |
| depends on ARCH_MSM8974 |
| select MSM_HAS_DEBUG_UART_HS_V14 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8974 devices. |
| |
| config DEBUG_MPQ8092_UART |
| bool "Kernel low-level debugging messages via MPQ8092 UART" |
| depends on ARCH_MPQ8092 |
| select MSM_HAS_DEBUG_UART_HS_V14 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MPQ8092 devices. |
| endchoice |
| |
| choice |
| prompt "Default Timer" |
| default MSM7X00A_USE_GP_TIMER |
| |
| config MSM7X00A_USE_GP_TIMER |
| bool "GP Timer" |
| help |
| Low resolution timer that allows power collapse from idle. |
| |
| config MSM7X00A_USE_DG_TIMER |
| bool "DG Timer" |
| help |
| High resolution timer. |
| endchoice |
| |
| choice |
| prompt "Suspend sleep mode" |
| default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND |
| help |
| Allows overriding the sleep mode used. Leave at power |
| collapse suspend unless the arm9 image has problems. |
| |
| config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND |
| bool "Power collapse suspend" |
| help |
| Lowest sleep state. Returns through reset vector. |
| |
| config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE |
| bool "Power collapse" |
| help |
| Sleep state that returns through reset vector. |
| |
| config MSM7X00A_SLEEP_MODE_APPS_SLEEP |
| bool "Apps Sleep" |
| |
| config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT |
| bool "Ramp down cpu clock and wait for interrupt" |
| |
| config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT |
| bool "Wait for interrupt" |
| endchoice |
| |
| config MSM7X00A_SLEEP_MODE |
| int |
| default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND |
| default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE |
| default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP |
| default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT |
| default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT |
| |
| choice |
| prompt "Idle sleep mode" |
| default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE |
| help |
| Allows overriding the sleep mode used from idle. Leave at power |
| collapse suspend unless the arm9 image has problems. |
| |
| config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND |
| bool "Power collapse suspend" |
| help |
| Lowest sleep state. Returns through reset vector. |
| |
| config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE |
| bool "Power collapse" |
| help |
| Sleep state that returns through reset vector. |
| |
| config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP |
| bool "Apps Sleep" |
| |
| config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT |
| bool "Ramp down cpu clock and wait for interrupt" |
| |
| config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT |
| bool "Wait for interrupt" |
| endchoice |
| |
| config MSM7X00A_IDLE_SLEEP_MODE |
| int |
| default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND |
| default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE |
| default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP |
| default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT |
| default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT |
| |
| config MSM7X00A_IDLE_SLEEP_MIN_TIME |
| int "Minimum idle time before sleep" |
| default 20000000 |
| help |
| Minimum idle time in nanoseconds before entering low power mode. |
| |
| config MSM7X00A_IDLE_SPIN_TIME |
| int "Idle spin time before cpu ramp down" |
| default 80000 |
| help |
| Spin time in nanoseconds before ramping down cpu clock and entering |
| any low power state. |
| |
| menuconfig MSM_IDLE_STATS |
| bool "Collect idle statistics" |
| default y |
| help |
| Collect idle statistics and export them in proc/msm_pm_stats. |
| |
| if MSM_IDLE_STATS |
| |
| config MSM_IDLE_STATS_FIRST_BUCKET |
| int "First bucket time" |
| default 62500 |
| help |
| Upper time limit in nanoseconds of first bucket. |
| |
| config MSM_IDLE_STATS_BUCKET_SHIFT |
| int "Bucket shift" |
| default 2 |
| |
| config MSM_IDLE_STATS_BUCKET_COUNT |
| int "Bucket count" |
| default 10 |
| |
| config MSM_SUSPEND_STATS_FIRST_BUCKET |
| int "First bucket time for suspend" |
| default 1000000000 |
| help |
| Upper time limit in nanoseconds of first bucket of the |
| histogram. This is for collecting statistics on suspend. |
| |
| endif # MSM_IDLE_STATS |
| |
| config CPU_HAS_L2_PMU |
| bool "L2CC PMU Support" |
| help |
| Select this if the L2 cache controller has a Performance Monitoring Unit. |
| |
| config HTC_HEADSET |
| tristate "HTC 2 Wire detection driver" |
| default n |
| help |
| Provides support for detecting HTC 2 wire devices, such as wired |
| headset, on the trout platform. Can be used with the msm serial |
| debugger, but not with serial console. |
| |
| config TROUT_BATTCHG |
| depends on MACH_TROUT && POWER_SUPPLY |
| default y |
| bool "Trout battery / charger driver" |
| |
| config HTC_PWRSINK |
| depends on MSM_SMD |
| default n |
| bool "HTC Power Sink Driver" |
| |
| config QSD_SVS |
| bool "QSD Static Voltage Scaling" |
| depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA) |
| default y |
| select TPS65023 |
| help |
| Enables static voltage scaling using the TPS65023 PMIC. |
| |
| config QSD_PMIC_DEFAULT_DCDC1 |
| int "PMIC default output voltage" |
| depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA) |
| default 1250 |
| help |
| This is the PMIC voltage at Linux kernel boot. |
| |
| config MSM_FIQ_SUPPORT |
| default y |
| bool "Enable installation of an FIQ handler." |
| |
| config MSM_SERIAL_DEBUGGER |
| select MSM_FIQ_SUPPORT |
| select KERNEL_DEBUGGER_CORE |
| default n |
| bool "FIQ Mode Serial Debugger" |
| help |
| The FIQ serial debugger can accept commands even when the |
| kernel is unresponsive due to being stuck with interrupts |
| disabled. Depends on the kernel debugger core in drivers/misc. |
| |
| config MSM_SERIAL_DEBUGGER_CONSOLE |
| depends on MSM_SERIAL_DEBUGGER |
| default n |
| bool "Console on FIQ Serial Debugger port" |
| help |
| Enables a console so that printk messages are displayed on |
| the debugger serial port as the occur. |
| |
| config MSM_PROC_COMM |
| default y |
| bool "Proc-Comm RPC Interface" |
| help |
| Enables a lightweight communications interface to the |
| baseband processor. |
| |
| config MSM_SMD |
| bool "MSM Shared Memory Driver (SMD)" |
| help |
| Support for the shared memory interface between the apps |
| processor and the baseband processor. Provides access to |
| the "shared heap", as well as virtual serial channels |
| used to communicate with various services on the baseband |
| processor. |
| |
| choice |
| prompt "MSM Shared memory interface version" |
| depends on MSM_SMD |
| default MSM_SMD_PKG3 if ARCH_MSM_ARM11 |
| default MSM_SMD_PKG4 if ARCH_MSM_SCORPION |
| |
| config MSM_SMD_PKG3 |
| bool |
| prompt "Package 3" |
| |
| config MSM_SMD_PKG4 |
| bool |
| prompt "Package 4" |
| endchoice |
| |
| config MSM_PCIE |
| bool "MSM PCIe Controller driver" |
| depends on PCI && PCI_MSI |
| help |
| Enables the PCIe functionality by configures PCIe core on |
| MSM chipset and by enabling the ARM PCI framework extension. |
| |
| config MSM_RPC_SDIO_XPRT |
| depends on MSM_SDIO_AL |
| default y |
| bool "MSM SDIO XPRT Layer" |
| help |
| SDIO Transport Layer for RPC Rouer |
| |
| config MSM_RPC_SDIO_DEBUG |
| depends on MSM_RPC_SDIO_XPRT |
| default y |
| bool "MSM SDIO XPRT debug support" |
| help |
| Support for debugging SDIO XPRT |
| |
| config MSM_SMD_DEBUG |
| depends on MSM_SMD |
| default y |
| bool "MSM SMD debug support" |
| help |
| Support for debugging the SMD for communication |
| between the ARM9 and ARM11 |
| |
| config MSM_SDIO_AL |
| depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK) |
| default y |
| tristate "SDIO-Abstraction-Layer" |
| help |
| Support MSM<->MDM Communication over SDIO bus. |
| MDM SDIO-Client should have pipes support. |
| |
| config MSM_SDIO_DMUX |
| bool "SDIO Data Mux Driver" |
| depends on MSM_SDIO_AL |
| default n |
| help |
| Support Muxed Data Channels over SDIO interface. |
| |
| config MSM_BAM_DMUX |
| bool "BAM Data Mux Driver" |
| depends on SPS |
| default n |
| help |
| Support Muxed Data Channels over BAM interface. |
| BAM has a limited number of pipes. This driver |
| provides a means to support more logical channels |
| via muxing than BAM could without muxing. |
| |
| config MSM_N_WAY_SMD |
| depends on (MSM_SMD && !(ARCH_MSM7X01A)) |
| default y |
| bool "MSM N-WAY SMD support" |
| help |
| Supports APPS-QDSP SMD communication along with |
| normal APPS-MODEM SMD communication. |
| |
| config MSM_N_WAY_SMSM |
| depends on (MSM_SMD && !(ARCH_MSM7X01A)) |
| default y |
| bool "MSM N-WAY SMSM support" |
| help |
| Supports APPS-QDSP SMSM communication along with |
| normal APPS-MODEM SMSM communication. |
| |
| config MSM_RESET_MODEM |
| tristate "Reset Modem Driver" |
| depends on MSM_SMD |
| default m |
| help |
| Allows the user to reset the modem through a device node. |
| |
| config MSM_SMD_LOGGING |
| depends on MSM_SMD |
| default y |
| bool "MSM Shared Memory Logger" |
| help |
| This option exposes the shared memory logger at /dev/smem_log |
| and a debugfs node named smem_log. |
| |
| If in doubt, say yes. |
| |
| config MSM_IPC_LOGGING |
| bool "MSM Debug Logging for IPC Drivers" |
| help |
| This option allows the debug logging for IPC Drivers. |
| |
| If in doubt, say no. |
| |
| config MSM_SMD_NMEA |
| bool "NMEA GPS Driver" |
| depends on MSM_SMD |
| default y |
| help |
| Enable this to support the NMEA GPS device. |
| |
| If in doubt, say yes. |
| |
| config MSM_SDIO_TTY |
| bool "SDIO TTY Driver" |
| depends on MSM_SDIO_AL |
| default n |
| help |
| Provides a TTY driver SDIO TTY |
| This driver can be used by user space |
| applications for passing data through the |
| SDIO interface. |
| |
| config MSM_SMD_TTY |
| bool "SMD TTY Driver" |
| depends on MSM_SMD |
| default y |
| help |
| Provides TTY interfaces to interact with the modem. |
| |
| If in doubt, say yes. |
| |
| config MSM_SMD_QMI |
| bool "SMD QMI Driver" |
| depends on MSM_SMD |
| default y |
| help |
| Manages network data connections. |
| |
| If in doubt, say yes. |
| |
| config MSM_SMD_PKT |
| bool "SMD Packet Driver" |
| depends on MSM_SMD |
| default y |
| help |
| Provides a binary SMD non-muxed packet port interface. |
| |
| If in doubt, say yes. |
| |
| config MSM_SDIO_CMUX |
| bool "SDIO CMUX Driver" |
| depends on MSM_SDIO_AL |
| default n |
| help |
| Provides a Muxed port interface over SDIO QMI |
| |
| config MSM_DSPS |
| bool "Sensors DSPS driver" |
| depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960)) |
| default n |
| help |
| Provides user-space interface to the sensors manager |
| to turn on/off the Sensors Processor system clocks. |
| It is the DSPS responsibility to turn on/off the sensors |
| themself. |
| The number of clocks and their name may vary between targets. |
| It also triggers the PIL to load the DSPS firmware. |
| |
| config MSM_SDIO_CTL |
| bool "SDIO CTL Driver" |
| depends on MSM_SDIO_CMUX |
| default n |
| help |
| Provides a binary SDIO control port interface. |
| |
| config MSM_ONCRPCROUTER |
| depends on MSM_SMD |
| default n |
| bool "MSM ONCRPC router support" |
| help |
| Support for the MSM ONCRPC router for communication between |
| the ARM9 and ARM11 |
| |
| config MSM_IPC_ROUTER |
| depends on NET |
| default n |
| bool "MSM IPC Router support" |
| help |
| Support for the MSM IPC Router for communication between |
| the APPs and the MODEM |
| |
| config MSM_IPC_ROUTER_SMD_XPRT |
| depends on MSM_SMD |
| depends on MSM_IPC_ROUTER |
| default n |
| bool "MSM SMD XPRT Layer" |
| help |
| SMD Transport Layer for IPC Router |
| |
| config MSM_ONCRPCROUTER_DEBUG |
| depends on MSM_ONCRPCROUTER |
| default y |
| bool "MSM debug ONCRPC router support" |
| help |
| Support for debugging the ONCRPC router for communication |
| between the ARM9 and ARM11 |
| |
| config MSM_RPC_LOOPBACK_XPRT |
| depends on MSM_ONCRPCROUTER |
| default n |
| bool "MSM RPC local routing support" |
| help |
| Support for routing RPC messages between APPS clients |
| and APPS servers. Helps in testing APPS RPC framework. |
| |
| config MSM_RPCSERVER_TIME_REMOTE |
| depends on MSM_ONCRPCROUTER && RTC_HCTOSYS |
| default y |
| bool "Time remote RPC server" |
| help |
| The time remote server receives notification of time bases and |
| reports these events to registered callback functions. |
| |
| config MSM_RPCSERVER_WATCHDOG |
| depends on MSM_ONCRPCROUTER |
| default y |
| bool "Watchdog RPC server" |
| help |
| The dog_keepalive server handles watchdog events. |
| |
| config MSM_RPC_WATCHDOG |
| depends on MSM_ONCRPCROUTER |
| default n |
| bool "Watchdog RPC client" |
| help |
| The dog_keepalive client module. |
| |
| config MSM_RPC_PING |
| depends on MSM_ONCRPCROUTER && DEBUG_FS |
| default m |
| bool "MSM rpc ping" |
| help |
| Implements MSM rpc ping test module. |
| |
| config MSM_RPC_PROC_COMM_TEST |
| depends on DEBUG_FS && MSM_PROC_COMM |
| default m |
| bool "MSM rpc proc comm test" |
| help |
| Implements MSM rpc proc comm test module. |
| |
| config MSM_RPC_OEM_RAPI |
| depends on MSM_ONCRPCROUTER |
| default m |
| bool "MSM oem rapi" |
| help |
| Implements MSM oem rapi client module. |
| |
| config MSM_RPCSERVER_HANDSET |
| depends on MSM_ONCRPCROUTER |
| default y |
| bool "Handset events RPC server" |
| help |
| Support for receiving handset events like headset detect, |
| headset switch and clamshell state. |
| |
| config MSM_RMT_STORAGE_CLIENT |
| depends on (ARCH_MSM && MSM_ONCRPCROUTER) |
| default n |
| bool "Remote Storage RPC client" |
| help |
| Provide RPC mechanism for remote processors to access storage |
| device on apps processor. |
| |
| config MSM_RMT_STORAGE_CLIENT_STATS |
| depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS) |
| default n |
| bool "Remote storage RPC client performance statistics" |
| help |
| Collects performance statistics and shows this information |
| through a debugfs file rmt_storage_stats. |
| |
| config MSM_SDIO_SMEM |
| depends on MSM_SDIO_AL |
| default n |
| bool "SDIO SMEM for remote storage" |
| help |
| Copies data from remote MDM9K memory to local MSM8x60 |
| memory. Used by remote storage client to shadow |
| MDM9K filesystem. |
| |
| config MSM_DALRPC |
| bool "DAL RPC support" |
| default n |
| help |
| Supports RPC calls to DAL devices on remote processor cores. |
| |
| config MSM_DALRPC_TEST |
| tristate "DAL RPC test module" |
| depends on (MSM_DALRPC && DEBUG_FS) |
| default m |
| help |
| Exercises DAL RPC calls to QDSP6. |
| |
| if CPU_FREQ_MSM |
| |
| config MSM_CPU_FREQ_SET_MIN_MAX |
| bool "Set Min/Max CPU frequencies." |
| default n |
| help |
| Allow setting min and max CPU frequencies. Sysfs can be used |
| to override these values. |
| |
| config MSM_CPU_FREQ_MAX |
| int "Max CPU Frequency" |
| depends on MSM_CPU_FREQ_SET_MIN_MAX |
| default 384000 |
| |
| config MSM_CPU_FREQ_MIN |
| int "Min CPU Frequency" |
| depends on MSM_CPU_FREQ_SET_MIN_MAX |
| default 245760 |
| |
| endif # CPU_FREQ_MSM |
| |
| config MSM_CPU_AVS |
| bool "Enable software controlled Adaptive Voltage Scaling (AVS)" |
| depends on (ARCH_MSM_SCORPION && QSD_SVS) |
| depends on ARCH_QSD8X50 |
| default n |
| select MSM_AVS_HW |
| help |
| This enables the s/w control of Adaptive Voltage Scaling feature |
| in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency |
| based on feedback from three ring oscillators in the CPU. |
| |
| config MSM_AVS_HW |
| bool "Enable Adaptive Voltage Scaling (AVS)" |
| default n |
| help |
| Enable AVS hardware to fine tune voltage at each frequency. The |
| AVS hardware blocks associated with each Qualcomm ARMv7 cores can |
| fine tune the voltages based on the feedback from the ring |
| oscillators. |
| |
| config MSM_HW3D |
| tristate "MSM Hardware 3D Register Driver" |
| depends on ANDROID_PMEM |
| default y |
| help |
| Provides access to registers needed by the userspace OpenGL|ES |
| library. |
| |
| config MSM_ADSP |
| depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27) |
| tristate "MSM ADSP driver" |
| depends on ANDROID_PMEM |
| default y |
| help |
| Provides access to registers needed by the userspace aDSP library. |
| |
| config ADSP_RPC_VER |
| hex |
| default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009)) |
| default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008)) |
| depends on MSM_ADSP |
| help |
| Select proper ADSP RPC version |
| choice |
| prompt "ADSP RPC version" |
| |
| default AMSS_7X25_VERSION_2009 |
| |
| config AMSS_7X25_VERSION_2009 |
| bool "2.0.09" |
| |
| config AMSS_7X25_VERSION_2008 |
| bool "2.0.08" |
| endchoice |
| |
| config MSM7KV2_AUDIO |
| bool "MSM7K v2 audio" |
| depends on (ARCH_MSM7X30 && ANDROID_PMEM) |
| default y |
| help |
| Enables QDSP5V2-based audio drivers for audio playbacks and |
| voice call. |
| |
| config MSM_ADSP_REPORT_EVENTS |
| bool "Report modem events from the DSP" |
| default y |
| depends on (MSM_ADSP || MSM7KV2_AUDIO) |
| help |
| Normally, only messages from the aDSP are reported to userspace. |
| With this option, we report events from the aDSP as well. |
| |
| config MSM_QDSP6 |
| tristate "QDSP6 support" |
| depends on ARCH_QSD8X50 && ANDROID_PMEM |
| default y |
| help |
| Enable support for qdsp6. This provides audio and video functionality. |
| |
| config MSM8X60_AUDIO |
| tristate "MSM8X60 audio support" |
| depends on ARCH_MSM8X60 && ANDROID_PMEM |
| default y |
| help |
| Enable support for qdsp6v2. This provides audio functionality. |
| |
| config MSM8X60_FTM_AUDIO_DEVICES |
| bool "MSM8X60 audio factory test mode support" |
| depends on MSM8X60_AUDIO |
| help |
| Enable support audio factory test mode devices. This is used |
| in a production line environment. |
| |
| config RTAC |
| bool "MSM8K real-time audio calibration support" |
| default y |
| help |
| Enable support for rtac. This enables calibration during |
| audio operation |
| |
| config MSM7X27A_AUDIO |
| bool "MSM7X27A audio support" |
| depends on ARCH_MSM7X27A && MSM_ADSP |
| default n |
| help |
| Enable support for 7x27a. This provides audio functionality. |
| |
| config MSM_PROC_COMM_REGULATOR |
| bool |
| depends on MSM_PROC_COMM && REGULATOR |
| help |
| Enable regulator framework support for regulators managed by PMLIB |
| on the modem, and controlled through proccomm calls. |
| |
| config MSM_VREG_SWITCH_INVERTED |
| bool "Reverse vreg switch polarity" |
| default n |
| help |
| Reverses the enable and disable for vreg switch. |
| |
| config MSM_DMA_TEST |
| tristate "MSM DMA test module" |
| default m |
| help |
| Intended to be compiled as a module. Provides a device node |
| and ioctls for testing the MSM dma system. |
| |
| config WIFI_CONTROL_FUNC |
| bool "Enable WiFi control function abstraction" |
| help |
| Enables Power/Reset/Carddetect function abstraction |
| |
| config WIFI_MEM_PREALLOC |
| depends on WIFI_CONTROL_FUNC |
| bool "Preallocate memory for WiFi buffers" |
| help |
| Preallocates memory buffers for WiFi driver |
| |
| config QSD_AUDIO |
| bool "QSD audio" |
| depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP |
| default y |
| help |
| Provides PCM, MP3, and AAC audio playback. |
| |
| config AUDIO_AAC_PLUS |
| depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO) |
| bool "AAC+ Audio" |
| default y |
| help |
| Provides AAC+ decoding |
| |
| config AUDIO_ENHANCED_AAC_PLUS |
| depends on AUDIO_AAC_PLUS |
| bool "Enhanced AAC+ Audio" |
| default y |
| help |
| Provides Enhanced AAC+ decoding |
| |
| config SURF_FFA_GPIO_KEYPAD |
| bool "MSM SURF/FFA GPIO keypad" |
| depends on INPUT_GPIO = "y" |
| default y |
| help |
| Select if the GPIO keypad is attached. |
| |
| config MSM_SLEEP_TIME_OVERRIDE |
| bool "Allow overriding suspend/sleep time with PM module parameter" |
| default y |
| help |
| Enable the module parameter sleep_time_override. Specified |
| in units of seconds, it overwrites the normal sleep time of |
| suspend. The feature is required for automated power management |
| testing. |
| |
| config MSM_MEMORY_LOW_POWER_MODE |
| bool "Control the low power modes of memory" |
| default n |
| help |
| The application processor controls whether memory should enter |
| which low power mode. |
| |
| choice |
| prompt "Default Memory Low Power Mode during Idle" |
| depends on MSM_MEMORY_LOW_POWER_MODE |
| default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE |
| help |
| Selects the default low power mode of the memory during idle |
| sleep. |
| |
| config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE |
| bool "Memory active" |
| |
| config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION |
| bool "Memory in retention" |
| |
| config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN |
| bool "Memory in deep power down" |
| endchoice |
| |
| choice |
| prompt "Default Memory Low Power Mode during Suspend" |
| depends on MSM_MEMORY_LOW_POWER_MODE |
| default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE |
| help |
| Selects the default low power mode of the memory during suspend |
| sleep. |
| |
| config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE |
| bool "Memory active" |
| |
| config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION |
| bool "Memory in retention" |
| |
| config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN |
| bool "Memory in deep power down" |
| endchoice |
| |
| choice |
| prompt "Power management timeout action" |
| default MSM_PM_TIMEOUT_HALT |
| help |
| Selects the Application Processor's action when Power Management |
| times out waiting for Modem's handshake. |
| |
| config MSM_PM_TIMEOUT_HALT |
| bool "Halt the Application Processor" |
| |
| config MSM_PM_TIMEOUT_RESET_MODEM |
| bool "Reset the Modem Processor" |
| |
| config MSM_PM_TIMEOUT_RESET_CHIP |
| bool "Reset the entire chip" |
| endchoice |
| |
| config MSM_IDLE_WAIT_ON_MODEM |
| int "Wait for Modem to become ready for idle power collapse" |
| default 0 |
| help |
| If Modem is not ready to handle Application Processor's request |
| for idle power collapse, wait the number of microseconds in case |
| Modem becomes ready soon. |
| |
| config MSM_RPM_REGULATOR |
| bool "RPM regulator driver" |
| depends on MSM_RPM && REGULATOR |
| help |
| Compile in support for the RPM regulator driver, used for setting |
| voltages and other parameters of the various power rails supplied |
| by some Qualcomm PMICs. |
| |
| config MSM_RPM_REGULATOR_SMD |
| bool "SMD RPM regulator driver" |
| depends on REGULATOR |
| depends on OF |
| depends on MSM_RPM_SMD |
| help |
| Compile in support for the SMD RPM regulator driver which is used for |
| setting voltages and other parameters of the various power rails |
| supplied by some Qualcomm PMICs. The SMD RPM regulator driver should |
| be used on systems which contain an RPM which communicates with the |
| application processor over SMD. |
| |
| config MSM_SUBSYSTEM_RESTART |
| bool "MSM Subsystem Restart" |
| help |
| This option enables the MSM subsystem restart framework. |
| |
| The MSM subsystem restart framework provides support to boot, |
| shutdown, and restart subsystems with a reference counted API. |
| It also notifies userspace of transitions between these states via |
| sysfs. |
| |
| config MSM_SYSMON_COMM |
| bool "MSM System Monitor communication support" |
| depends on MSM_SMD && MSM_SUBSYSTEM_RESTART |
| help |
| This option adds support for MSM System Monitor library, which |
| provides an API that may be used for notifying subsystems within |
| the SoC about other subsystems' power-up/down state-changes. |
| |
| config MSM_PIL |
| bool "Peripheral image loading" |
| select FW_LOADER |
| default n |
| help |
| Some peripherals need to be loaded into memory before they can be |
| brought out of reset. |
| |
| Say yes to support these devices. |
| |
| config MSM_PIL_MODEM |
| tristate "Modem (ARM11) Boot Support" |
| depends on MSM_PIL && MSM_SUBSYSTEM_RESTART |
| help |
| Support for booting and shutting down ARM11 Modem processors. |
| |
| config MSM_PIL_QDSP6V3 |
| tristate "QDSP6v3 (Hexagon) Boot Support" |
| depends on MSM_PIL && MSM_SUBSYSTEM_RESTART |
| help |
| Support for booting and shutting down QDSP6v3 processors (hexagon). |
| The QDSP6 is a low power DSP used in audio software applications. |
| |
| config MSM_PIL_QDSP6V4 |
| tristate "QDSP6v4 (Hexagon) Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down QDSP6v4 processors (hexagon). |
| The QDSP6 is a low power DSP used in audio, modem firmware, and modem |
| software applications. |
| |
| config MSM_PIL_LPASS_QDSP6V5 |
| tristate "LPASS QDSP6v5 (Hexagon) Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down QDSP6v5 (Hexagon) processors |
| in low power audio subsystems. |
| |
| config MSM_PIL_MSS_QDSP6V5 |
| tristate "MSS QDSP6v5 (Hexagon) Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down QDSP6v5 (Hexagon) processors |
| in modem subsystems. |
| |
| config MSM_PIL_MBA |
| tristate "Support for modem self-authentication" |
| depends on MSM_PIL_MSS_QDSP6V5 |
| help |
| Support for booting self-authenticating modems using the Modem Boot |
| Authenticator. |
| |
| config MSM_PIL_RIVA |
| tristate "RIVA (WCNSS) Boot Support" |
| depends on MSM_PIL && MSM_SUBSYSTEM_RESTART |
| help |
| Support for booting and shutting down the RIVA processor (WCNSS). |
| Riva is the wireless subsystem processor used in bluetooth, wireless |
| LAN, and FM software applications. |
| |
| config MSM_PIL_TZAPPS |
| tristate "TZApps Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down TZApps. |
| |
| TZApps is an image that runs in the secure processor state. It is |
| used to decrypt data and perform secure operations on the behalf of |
| the kernel. |
| |
| config MSM_PIL_DSPS |
| tristate "DSPS Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down ARM7 DSPS processors. |
| |
| DSPS is a sensors offloading processor used for applications such |
| as rotation detection, temperature, etc. |
| |
| config MSM_PIL_VIDC |
| tristate "Video Core Secure Boot Support" |
| depends on MSM_PIL |
| help |
| Support for authenticating the video core image. |
| |
| config MSM_PIL_VENUS |
| tristate "VENUS (Video) Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down the VENUS processor (Video). |
| Venus is the Video subsystem processor used for video codecs. |
| |
| config MSM_PIL_GSS |
| tristate "GSS (Cortex A5) Boot Support" |
| depends on MSM_PIL && MSM_SUBSYSTEM_RESTART |
| help |
| Support for booting and shutting down Cortex A5 processors which run |
| GPS subsystem firmware. |
| |
| config MSM_PIL_PRONTO |
| tristate "PRONTO (WCNSS) Boot Support" |
| depends on MSM_PIL |
| help |
| Support for booting and shutting down the PRONTO processor (WCNSS). |
| PRONTO is the wireless subsystem processor used in bluetooth, wireless |
| LAN, and FM software applications. |
| |
| config MSM_SCM |
| bool "Secure Channel Manager (SCM) support" |
| default n |
| |
| config MSM_MODEM_8960 |
| bool "MSM 8960 Modem driver" |
| depends on (ARCH_MSM8960 || ARCH_MSM9615) |
| help |
| This option enables the modem driver for the MSM8960 and MSM9615, which monitors |
| modem hardware watchdog interrupt lines and plugs into the subsystem |
| restart and PIL drivers. For MSM9615, it only supports a full chip reset. |
| |
| config MSM_LPASS_8960 |
| tristate "MSM 8960 Lpass driver" |
| depends on (ARCH_MSM8960 || ARCH_MSM9615) |
| help |
| This option enables the lpass driver for the MSM8960 and MSM9615. This monitors |
| lpass hardware watchdog interrupt lines and plugs into the subsystem |
| restart and PIL drivers. For MSM9615, it only supports a full chip reset. |
| |
| config MSM_MODEM_SSR_8974 |
| bool "MSM 8974 Modem restart driver" |
| depends on (ARCH_MSM8974) |
| help |
| This option enables the modem subsystem restart driver for the MSM8974. |
| It monitors the modem SMSM status bits and the modem watchdog line and |
| restarts the modem or the 8974 when the modem encounters a fatal error, |
| depending on the restart level selected in the subsystem restart driver. |
| |
| config MSM_ADSP_SSR_8974 |
| bool "MSM 8974 adsp restart driver" |
| depends on (ARCH_MSM8974) |
| help |
| This option enables the adsp restart driver for the MSM8974. |
| It monitors the adsp SMSM status bits and the adsp watchdog line and |
| restarts the adsp or the 8974 when the adsp encounters a fatal error, |
| depending on the restart level selected in the subsystem restart driver. |
| |
| config MSM_WCNSS_SSR_8974 |
| tristate "MSM 8974 WCNSS restart module" |
| depends on (ARCH_MSM8974) |
| help |
| This option enables the WCNSS restart module for MSM8974. It monitors |
| WCNSS SMSM status bits and WCNSS hardware watchdog interrupt line; and |
| depending on the restart level, it will restart WCNSS when a fatal error |
| occurs at WCNSS. |
| |
| config SCORPION_Uni_45nm_BUG |
| bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA" |
| depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A) |
| default y |
| help |
| Invalidating the Instruction Cache by Modified Virtual Address to PoU and |
| invalidating the Branch Predictor Array by Modified Virtual Address can |
| create invalid entries in the TLB with the wrong ASID values on Scorpion |
| Uniprocessor 45nm (SC45U) cores. This option enables the recommended software |
| workaround for Scorpion Uniprocessor 45nm cores. |
| |
| This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores. |
| |
| config MSM_BUSPM_DEV |
| tristate "MSM Bus Performance Monitor Kernel Module" |
| depends on (ARCH_MSM8X60 || ARCH_MSM8960) |
| default m |
| help |
| This kernel module is used to mmap() hardware registers for the |
| performance monitors, counters, etc. The module can also be used to |
| allocate physical memory which is used by bus performance hardware to |
| dump performance data. |
| |
| config MSM_TZ_LOG |
| tristate "MSM Trust Zone (TZ) Log Driver" |
| depends on DEBUG_FS |
| help |
| This option enables a driver with a debugfs interface for messages |
| produced by the Secure code (Trust zone). These messages provide |
| diagnostic information about TZ operation. |
| |
| config MSM_RPM_LOG |
| tristate "MSM Resource Power Manager Log Driver" |
| depends on DEBUG_FS |
| depends on MSM_RPM |
| default n |
| help |
| This option enables a driver which can read from a circular buffer |
| of messages produced by the RPM. These messages provide diagnostic |
| information about RPM operation. The driver outputs the messages |
| via a debugfs node. |
| |
| config MSM_RPM_STATS_LOG |
| tristate "MSM Resource Power Manager Stat Driver" |
| depends on DEBUG_FS |
| depends on MSM_RPM |
| default n |
| help |
| This option enables a driver which reads RPM messages from a shared |
| memory location. These messages provide statistical information about |
| the low power modes that RPM enters. The drivers outputs the message |
| via a debugfs node. |
| |
| config MSM_RPM_RBCPR_STATS_LOG |
| tristate "MSM Resource Power Manager RPBCPR Stat Driver" |
| depends on DEBUG_FS |
| depends on MSM_RPM |
| help |
| This option enables a driver which reads RPM messages from a shared |
| memory location. These messages provide statistical information about |
| RBCPR (Rapid Bridge Core Power Reduction) information . The drivers |
| outputs the message via a debugfs node. |
| |
| config MSM_DIRECT_SCLK_ACCESS |
| bool "Direct access to the SCLK timer" |
| default n |
| |
| config IOMMU_API |
| bool |
| |
| config MSM_GPIOMUX |
| bool |
| |
| config MSM_SECURE_IO |
| bool |
| |
| config MSM_NATIVE_RESTART |
| bool |
| |
| config MSM_MODEM_RESTART |
| bool |
| |
| config MSM_PM2 |
| depends on PM |
| bool |
| |
| config MSM_PM8X60 |
| depends on PM |
| bool |
| |
| config MSM_EVENT_TIMER |
| bool "Event timer" |
| help |
| This option enables a modules that manages a list of event timers that |
| need to be monitored by the PM. The enables the PM code to monitor |
| events that require the core to be awake and ready to handle the |
| event. |
| |
| config MSM_NOPM |
| default y if !PM |
| bool |
| |
| config MSM_BUS_SCALING |
| bool "Bus scaling driver" |
| default n |
| |
| config MSM_BUS_RPM_MULTI_TIER_ENABLED |
| bool "RPM Multi-tiering Configuration" |
| depends on MSM_BUS_SCALING |
| |
| config MSM_WATCHDOG |
| bool "MSM Watchdog Support" |
| depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX |
| help |
| This enables the watchdog as is present on 8x60. Currently we use |
| core 0's watchdog, and reset the entire SoC if it times out. It does |
| not run during the bootup process, so it will not catch any early |
| lockups. |
| |
| config MSM_WATCHDOG_V2 |
| bool "MSM Watchdog Support" |
| help |
| This enables the watchdog module. It causes kernel panic if the |
| watchdog times out. It allows for detection of cpu hangs and |
| deadlocks. It does not run during the bootup process, so it will |
| not catch any early lockups. |
| |
| config MSM_MEMORY_DUMP |
| bool "MSM Memory Dump Support" |
| help |
| This enables memory dump feature. It allows various client |
| subsystems to register respective dump regions. At the time |
| of deadlocks or cpu hangs these dump regions are captured to |
| give a snapshot of the system at the time of the crash. |
| |
| config MSM_DLOAD_MODE |
| bool "Enable download mode on crashes" |
| depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_MSM8974 |
| default n |
| help |
| This makes the SoC enter download mode when it resets |
| due to a kernel panic. Note that this doesn't by itself |
| make the kernel reboot on a kernel panic - that must be |
| enabled via another mechanism. |
| |
| config MSM_JTAG |
| bool "JTAG and kernel debug and trace support across power collapse" |
| help |
| Enables support for kernel debugging (specifically breakpoints) and |
| processor tracing across power collapse both for JTag and OS hosted |
| software running on the target. Enabling this will ensure debug |
| and ETM registers are saved and restored across power collapse. |
| |
| For production builds, you should probably say 'N' here to avoid |
| potential power, performance and memory penalty. |
| |
| config MSM_ETM |
| tristate "Enable MSM ETM and ETB" |
| depends on ARCH_MSM8X60 |
| select MSM_JTAG |
| help |
| Enables embedded trace collection on MSM8660 |
| |
| config MSM_SLEEP_STATS_DEVICE |
| bool "Enable exporting of MSM sleep device stats to userspace" |
| |
| config MSM_RUN_QUEUE_STATS |
| bool "Enable collection and exporting of MSM Run Queue stats to userspace" |
| depends on (MSM_SOC_REV_A || ARCH_MSM8X60 || ARCH_MSM8960) |
| help |
| This option enalbes statistics collection on Run Queue. A daemon |
| in user mode, called MPDecision will be using this data to decide |
| on when to switch off/on the other cores. |
| |
| config MSM_STANDALONE_POWER_COLLAPSE |
| bool "Enable standalone power collapse" |
| default n |
| |
| config MSM_GSBI9_UART |
| bool "Enable GSBI9 UART device" |
| default n |
| help |
| This enables GSBI9 configured into UART. |
| |
| config MSM_SHARED_GPIO_FOR_UART2DM |
| bool "Use shared GPIOs into UART mode" |
| depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT) |
| help |
| This option configures GPIO muxed with SDC4/MMC3 |
| 8-bit mode into UART mode. It is used for serial |
| console on UART2DM. Say Y if you want to have |
| serial console on UART2DM. |
| |
| config MSM_SHOW_RESUME_IRQ |
| bool "Enable logging of interrupts that could have caused resume" |
| depends on (ARM_GIC || PMIC8058) |
| default y if PMIC8058 |
| default n |
| help |
| This option logs wake up interrupts that have triggered just before |
| the resume loop unrolls. Say Y if you want to debug why the system |
| resumed. |
| |
| config BT_MSM_PINTEST |
| tristate "MSM Bluetooth Pin Connectivity Test" |
| depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS) |
| default n |
| help |
| Bluetooth MSM Pin Connectivity test module. |
| This driver provides support for verifying the MSM to BT pin |
| connectivity. |
| |
| config MSM_FAKE_BATTERY |
| depends on POWER_SUPPLY |
| default n |
| bool "MSM Fake Battery" |
| help |
| Enables MSM fake battery driver. |
| |
| config MSM_QDSP6_APR |
| bool "Audio QDSP6 APR support" |
| depends on MSM_SMD |
| default n |
| help |
| Enable APR IPC protocol support between |
| application processor and QDSP6. APR is |
| used by audio driver to configure QDSP6's |
| ASM, ADM and AFE. |
| |
| config MSM_QDSP6_APRV2 |
| bool "Audio QDSP6 APRv2 support" |
| depends on MSM_SMD |
| default n |
| help |
| Enable APRv2 IPC protocol support between |
| application processor and QDSP6. APR is |
| used by audio driver to configure QDSP6's |
| ASM, ADM and AFE. |
| |
| config MSM_QDSP6_CODECS |
| bool "Audio Codecs on QDSP6 APR " |
| depends on MSM_SMD |
| default n |
| help |
| Enable Audio codecs with APR IPC protocol support between |
| application processor and QDSP6. APR is |
| used by audio driver to configure QDSP6's |
| ASM, ADM and AFE. |
| |
| config MSM_QDSP6V2_CODECS |
| bool "Audio QDSP6V2 APR support" |
| depends on MSM_SMD |
| help |
| Enable Audio codecs with APR IPC protocol support between |
| application processor and QDSP6 for B-family. APR is |
| used by audio driver to configure QDSP6's |
| ASM, ADM and AFE. |
| |
| config MSM_AUDIO_QDSP6 |
| bool "QDSP6 HW Audio support" |
| select SND_SOC_MSM_QDSP6_INTF |
| default n |
| help |
| Enable HW audio support in QDSP6. |
| QDSP6 can support HW encoder & decoder and audio processing |
| |
| config MSM_AUDIO_QDSP6V2 |
| bool "QDSP6V2 HW Audio support" |
| select SND_SOC_MSM_QDSP6V2_INTF |
| help |
| Enable HW audio support in QDSP6V2. |
| QDSP6V2 can support HW encoder & decoder and |
| audio processing. It will enable support for |
| AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among |
| others. |
| |
| config MSM_ADSP_LOADER |
| tristate "ADSP loader support" |
| select SND_SOC_MSM_APRV2_INTF |
| depends on MSM_AUDIO_QDSP6V2 && m |
| help |
| Enable ADSP image loader. |
| The ADSP loader brings ADSP out of reset |
| for the platforms that use APRv2. |
| Say M if you want to enable this module. |
| |
| config MSM_ULTRASOUND |
| bool "MSM ultrasound support" |
| depends on MSM_AUDIO_QDSP6 |
| help |
| Enable support for qdsp6/ultrasound. |
| |
| config MSM_RPC_VIBRATOR |
| bool "RPC based MSM Vibrator Support" |
| depends on MSM_ONCRPCROUTER |
| help |
| Enable the vibrator support on MSM over RPC. The vibrator |
| is connected on the PMIC. Say Y if you want to enable this |
| feature. |
| |
| config PM8XXX_RPC_VIBRATOR |
| bool "RPC based Vibrator on PM8xxx PMICs" |
| depends on MSM_RPC_VIBRATOR |
| help |
| Enable the vibrator support on MSM over RPC. The vibrator |
| is connected on the PM8XXX PMIC. Say Y if you want to enable |
| this feature. |
| |
| config MSM_SPM_V1 |
| bool "Driver support for SPM Version 1" |
| help |
| Enables the support for Version 1 of the SPM driver. SPM hardware is |
| used to manage the processor power during sleep. The driver allows |
| configuring SPM to allow different power modes. |
| |
| config MSM_SPM_V2 |
| bool "Driver support for SPM Version 2" |
| help |
| Enables the support for Version 2 of the SPM driver. SPM hardware is |
| used to manage the processor power during sleep. The driver allows |
| configuring SPM to allow different power modes. |
| |
| config MSM_L2_SPM |
| bool "SPM support for L2 cache" |
| depends on MSM_SPM_V2 |
| help |
| Enable SPM driver support for L2 cache. Some MSM chipsets allow |
| control of L2 cache low power mode with a Subsystem Power manager. |
| Enabling this driver allows configuring L2 SPM for low power modes |
| on supported chipsets. |
| |
| config MSM_MULTIMEDIA_USE_ION |
| bool "Multimedia suport using Ion" |
| depends on ION_MSM |
| help |
| Enable support for multimedia drivers using Ion for buffer management |
| instead of pmem. Selecting this may also involve userspace |
| dependencies as well. |
| |
| config MSM_OCMEM |
| bool "MSM On-Chip memory driver (OCMEM)" |
| help |
| Enable support for On-Chip Memory available on certain MSM chipsets. |
| OCMEM is a low latency, high performance pool shared by subsystems. |
| |
| config MSM_OCMEM_LOCAL_POWER_CTRL |
| bool "OCMEM Local Power Control" |
| depends on MSM_OCMEM |
| help |
| Enable direct power management of the OCMEM core by the |
| OCMEM driver. By default power management is delegated to |
| the RPM. Selecting this option causes the OCMEM driver to |
| directly handle the various macro power transitions. |
| |
| config MSM_OCMEM_DEBUG |
| bool "OCMEM Debug Support" |
| depends on MSM_OCMEM |
| help |
| Enable debug options for On-chip Memory (OCMEM) driver. |
| Various debug options include memory, power and latency. |
| Choosing one of these options allows debugging of each |
| individual subsystem separately. |
| |
| config MSM_OCMEM_NONSECURE |
| bool "OCMEM Non Secure Mode" |
| depends on MSM_OCMEM_DEBUG |
| help |
| Disable OCMEM interaction with secure processor. |
| By default OCMEM is secured and accesses for each master |
| is requested by the OCMEM driver. Selecting this option |
| causes the OCMEM memory to be in non-secure state unless |
| its locked down by the secure processor. |
| |
| config MSM_OCMEM_POWER_DEBUG |
| bool "OCMEM Power Debug Support" |
| depends on MSM_OCMEM_DEBUG |
| help |
| Enable debug support for OCMEM power management. |
| This adds support for verifying all power management |
| related operations of OCMEM. Both local power management |
| and RPM assisted power management operations are supported. |
| |
| config MSM_OCMEM_POWER_DISABLE |
| bool "OCMEM Disable Power Control" |
| depends on MSM_OCMEM_DEBUG |
| help |
| Disable all OCMEM power management. |
| This keeps all OCMEM macros turned ON at all times thus |
| never allowing them to be turned OFF. Both local power |
| management and RPM assisted power modes are supported. |
| |
| config MSM_RTB |
| bool "Register tracing" |
| help |
| Add support for logging different events to a small uncached |
| region. This is designed to aid in debugging reset cases where the |
| caches may not be flushed before the target resets. |
| |
| config MSM_RTB_SEPARATE_CPUS |
| bool "Separate entries for each cpu" |
| depends on MSM_RTB |
| depends on SMP |
| help |
| Under some circumstances, it may be beneficial to give dedicated space |
| for each cpu to log accesses. Selecting this option will log each cpu |
| separately. This will guarantee that the last acesses for each cpu |
| will be logged but there will be fewer entries per cpu |
| |
| config MSM_EBI_ERP |
| bool "External Bus Interface (EBI) error reporting" |
| help |
| Say 'Y' here to enable reporting of external bus interface errors to |
| the kernel log. Information such as the offending address and |
| transaction type will be logged. This may be useful for debugging |
| seemingly broken memory accesses. |
| |
| For production builds, you should probably say 'N' here. |
| |
| config MSM_CACHE_ERP |
| bool "Cache / CPU error reporting" |
| depends on ARCH_MSM_KRAIT |
| help |
| Say 'Y' here to enable reporting of cache and TLB errors to the kernel |
| log. Enabling this feature can be used as a system debugging technique |
| if cache corruption is suspected. Cache error statistics will also be |
| reported in /proc/cpu/msm_cache_erp. |
| |
| For production builds, you should probably say 'N' here. |
| |
| config MSM_L1_ERR_PANIC |
| bool "Panic on L1 cache errors" |
| depends on MSM_CACHE_ERP |
| help |
| To cause the kernel to panic whenever an L1 cache error is detected, say |
| 'Y' here. This may be useful as a debugging technique if general system |
| instability is suspected. |
| |
| For production builds, you should probably say 'N' here. |
| |
| config MSM_L1_ERR_LOG |
| bool "Log CPU ERP events to system memory" |
| depends on MSM_CACHE_ERP |
| help |
| Enable logging CPU ERP events to an area of memory that will be |
| preserved across a system reset. This may be useful for detecting and |
| troubleshooting ERP-related system crashes in the field. |
| |
| For production builds, you may want to say 'Y' here. |
| |
| config MSM_L2_ERP_PRINT_ACCESS_ERRORS |
| bool "Report L2 master port slave/decode errors in kernel log" |
| depends on MSM_CACHE_ERP |
| help |
| Master port errors can occur when a memory request is not properly |
| handled by the destination slave. This can occur if the destination |
| register does not exist or is inaccessible due to security |
| restrictions or (in some cases) clock configuration. Enabling this |
| option will cause a backtrace to be printed to the kernel log whenever |
| such an error is encountered. Note that the error is reported as an |
| interrupt rather than as an exception, meaning that the backtrace may |
| have some skid. This option may help with debugging, though production |
| builds should probably say 'N' here. |
| |
| config MSM_L2_ERP_PORT_PANIC |
| bool "Panic on L2 master port errors" |
| depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS |
| help |
| Master port errors can occur when a memory request is not properly |
| handled by the destination slave. Enable this option to catch drivers |
| which attempt to access bad areas of the address space, or access |
| hardware registers in an improper state (such as certain clocks not |
| being on). This option may help with debugging, though production |
| builds should probably say 'N' here. |
| |
| config MSM_L2_ERP_1BIT_PANIC |
| bool "Panic on recoverable L2 soft errors" |
| depends on MSM_CACHE_ERP |
| help |
| Enable this option to cause a kernel panic whenever the L2 cache |
| encounters a single-bit (correctable) soft error. This option should |
| only be enabled when doing low-level debugging where cache corruption |
| is suspected. |
| |
| For production builds, you should definitely say 'N' here. |
| |
| config MSM_L2_ERP_2BIT_PANIC |
| bool "Panic on unrecoverable L2 soft errors" |
| depends on MSM_CACHE_ERP |
| help |
| Enable this option to cause a kernel panic whenever the L2 cache |
| encounters a double-bit (non-correctable) soft error. Debug builds |
| will likely benefit from having this option enabled to catch cache |
| problems as soon as possible. |
| |
| For production builds, it may be acceptable to say 'N' here, since |
| an uncorrectable error might not necessarily cause further problems. |
| |
| config MSM_DCVS |
| bool "Use MSM DCVS for CPU/GPU Frequency control" |
| depends on MSM_SCM |
| help |
| Enable support for MSM DCVS to control all CPU and GPU core frequencies. |
| The DCVS manager allows idle driver to feed the idle information to the |
| algorithm and the algorithm returns a frequency for the core which is |
| passed to the frequency change driver. |
| |
| config MSM_CPR |
| tristate "Use MSM CPR in S/W mode" |
| help |
| Enable CPR (core power reduction) in S/W mode, where the processor |
| get's the notification from CPR block and programs the PMIC. |
| |
| config MSM_VP_REGULATOR |
| tristate "Use MSM PMIC8029 C2 regulator" |
| depends on ARCH_MSM8625 |
| help |
| Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access |
| for MSMs like 8625. |
| |
| config HAVE_ARCH_HAS_CURRENT_TIMER |
| bool |
| |
| config MSM_CACHE_DUMP |
| bool "Cache dumping support" |
| help |
| Add infrastructure to dump the L1 and L2 caches to an allocated buffer. |
| This allows for analysis of the caches in case cache corruption is |
| suspected. |
| |
| config MSM_CACHE_DUMP_ON_PANIC |
| bool "Dump caches on panic" |
| depends on MSM_CACHE_DUMP |
| help |
| By default, the caches are flushed on panic. This means that trying to |
| look at them in a RAM dump will give useless data. Select this if you |
| want to dump the L1 and L2 caches on panic before any flush occurs. |
| If unsure, say N |
| |
| config MSM_HSIC_SYSMON |
| tristate "MSM HSIC system monitor driver" |
| depends on USB |
| help |
| Add support for bridging with the system monitor interface of MDM |
| over HSIC. This driver allows the local system monitor to |
| communicate with the remote system monitor interface. |
| |
| config MSM_HSIC_SYSMON_TEST |
| tristate "MSM HSIC system monitor bridge test" |
| depends on USB && MSM_HSIC_SYSMON && DEBUG_FS |
| help |
| Enable the test hook for the Qualcomm system monitor HSIC driver. |
| This will create a debugfs file entry named "hsic_sysmon_test" which |
| can be read and written to send character data to the sysmon port of |
| the modem over USB. |
| |
| config MSM_RPC_PMIC |
| tristate "MSM RPC PMIC driver" |
| depends on MSM_ONCRPCROUTER |
| help |
| This driver supports the PMIC functionality over RPC for those MSM's |
| which do not have a direct access to PMIC. It supports ability to |
| configure MPP, GPIO and all the other supported peripherals of the |
| PMIC. |
| |
| config MSM_RPC_USB |
| tristate "MSM RPC USB driver" |
| depends on MSM_ONCRPCROUTER |
| help |
| This driver supports the USB configuration support over the RPC |
| interface. It support the HS USB module connected to the MSM |
| and FS USB which is connected over the PMIC. This support is |
| required for MSMs on which the APPS does not have a direct access |
| to the PMIC. |
| |
| config MSM_RPC_PMAPP |
| tristate "MSM RPC PMIC APP driver" |
| depends on MSM_ONCRPCROUTER |
| help |
| This driver supports the configuration of various PMIC APP modules |
| such as display backlight, vreg pin-ctrl, smps clock over the RPC |
| interface. This support is required for MSMs on which the APPS |
| does not have a direct access to the PMIC. |
| |
| config MSM_ENABLE_WDOG_DEBUG_CONTROL |
| bool "MSM Watchdog driver to disable debug Image" |
| help |
| This driver supports the configuration of the GCC_WDOG_DEBUG register |
| used to control debug image. |
| This support is currently required for MSM8974 to disable debug image |
| on PS HOLD reset |
| endif |