mfd: Align ab8500 with the abx500 interface
This patch makes the ab8500 mixed signal chip expose the same
interface for register access as the ab3100, ab3550 and ab5500 chip.
The ab8500_read() and ab8500_write() is removed and replaced with
abx500_get_register_interruptible() and
abx500_set_register_interruptible().
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index f5cec45..d63b605 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -10,6 +10,29 @@
#include <linux/device.h>
/*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK 0x1
+#define AB8500_SYS_CTRL2_BLOCK 0x2
+#define AB8500_REGU_CTRL1 0x3
+#define AB8500_REGU_CTRL2 0x4
+#define AB8500_USB 0x5
+#define AB8500_TVOUT 0x6
+#define AB8500_DBI 0x7
+#define AB8500_ECI_AV_ACC 0x8
+#define AB8500_RESERVED 0x9
+#define AB8500_GPADC 0xA
+#define AB8500_CHARGER 0xB
+#define AB8500_GAS_GAUGE 0xC
+#define AB8500_AUDIO 0xD
+#define AB8500_INTERRUPT 0xE
+#define AB8500_RTC 0xF
+#define AB8500_MISC 0x10
+#define AB8500_DEBUG 0x12
+#define AB8500_PROD_TEST 0x13
+#define AB8500_OTP_EMUL 0x15
+
+/*
* Interrupts
*/
@@ -99,6 +122,7 @@
int revision;
int irq_base;
int irq;
+ u8 chip_id;
int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
int (*read) (struct ab8500 *a8500, u16 addr);
@@ -124,10 +148,6 @@
struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
};
-extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
-extern int ab8500_read(struct ab8500 *a8500, u16 addr);
-extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
-
extern int __devinit ab8500_init(struct ab8500 *ab8500);
extern int __devexit ab8500_exit(struct ab8500 *ab8500);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 390726f..be7373c 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,8 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500 and possibly comming. It is not used for
- * ab4500 and ab8500 since they are another family of chip.
+ * ab3100, ab3550, ab5500, and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>