[SCSI] isd200: use one-element sg list in issuing commands
- This patch should be commited before:
usb: transport - convert to accessors and !use_sg code path removal
- isd200_action() was still using direct liniar pointers in issuing
commands to the USB transport level. This is no longer supported,
use one-element scatterlist instead.
- Adjustment of command's length in the case of scsi-to-ata translation
is now restored before return to queuecommand, since other wise it can
leak BIOs.
- isd200_action() return Error on unknown requests. Used to print an error
but still try to send garbage cdb.
- convert few places to scsi data accessors.
- Todo: This file will need to be changed when scsi_cmnd changes to
scsi_data_buffer or any other solution.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Matthew Dharm <mdharm-scsi@one-eyed-alien.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 49ba6c0..178e8c2 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -49,6 +49,7 @@
#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -287,6 +288,7 @@
/* maximum number of LUNs supported */
unsigned char MaxLUNs;
struct scsi_cmnd srb;
+ struct scatterlist sg;
};
@@ -398,6 +400,31 @@
* Transport routines
***********************************************************************/
+/**************************************************************************
+ * isd200_set_srb(), isd200_srb_set_bufflen()
+ *
+ * Two helpers to facilitate in initialization of scsi_cmnd structure
+ * Will need to change when struct scsi_cmnd changes
+ */
+static void isd200_set_srb(struct isd200_info *info,
+ enum dma_data_direction dir, void* buff, unsigned bufflen)
+{
+ struct scsi_cmnd *srb = &info->srb;
+
+ if (buff)
+ sg_init_one(&info->sg, buff, bufflen);
+
+ srb->sc_data_direction = dir;
+ srb->request_buffer = buff ? &info->sg : NULL;
+ srb->request_bufflen = bufflen;
+ srb->use_sg = buff ? 1 : 0;
+}
+
+static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen)
+{
+ srb->request_bufflen = bufflen;
+}
+
/**************************************************************************
* isd200_action
@@ -432,9 +459,7 @@
ata.generic.RegisterSelect =
REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
REG_STATUS | REG_ERROR;
- srb->sc_data_direction = DMA_FROM_DEVICE;
- srb->request_buffer = pointer;
- srb->request_bufflen = value;
+ isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value);
break;
case ACTION_ENUM:
@@ -444,7 +469,7 @@
ACTION_SELECT_5;
ata.generic.RegisterSelect = REG_DEVICE_HEAD;
ata.write.DeviceHeadByte = value;
- srb->sc_data_direction = DMA_NONE;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
break;
case ACTION_RESET:
@@ -453,7 +478,7 @@
ACTION_SELECT_3|ACTION_SELECT_4;
ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER;
- srb->sc_data_direction = DMA_NONE;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
break;
case ACTION_REENABLE:
@@ -462,7 +487,7 @@
ACTION_SELECT_3|ACTION_SELECT_4;
ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER;
- srb->sc_data_direction = DMA_NONE;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
break;
case ACTION_SOFT_RESET:
@@ -471,21 +496,20 @@
ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
ata.write.DeviceHeadByte = info->DeviceHead;
ata.write.CommandByte = WIN_SRST;
- srb->sc_data_direction = DMA_NONE;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
break;
case ACTION_IDENTIFY:
US_DEBUGP(" isd200_action(IDENTIFY)\n");
ata.generic.RegisterSelect = REG_COMMAND;
ata.write.CommandByte = WIN_IDENTIFY;
- srb->sc_data_direction = DMA_FROM_DEVICE;
- srb->request_buffer = (void *) info->id;
- srb->request_bufflen = sizeof(struct hd_driveid);
+ isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
+ sizeof(struct hd_driveid));
break;
default:
US_DEBUGP("Error: Undefined action %d\n",action);
- break;
+ return ISD200_ERROR;
}
memcpy(srb->cmnd, &ata, sizeof(ata.generic));
@@ -590,7 +614,7 @@
return;
}
- if ((srb->resid > 0) &&
+ if ((scsi_get_resid(srb) > 0) &&
!((srb->cmnd[0] == REQUEST_SENSE) ||
(srb->cmnd[0] == INQUIRY) ||
(srb->cmnd[0] == MODE_SENSE) ||
@@ -1217,7 +1241,6 @@
return(retStatus);
}
-
/**************************************************************************
* isd200_scsi_to_ata
*
@@ -1266,7 +1289,7 @@
ataCdb->generic.TransferBlockSize = 1;
ataCdb->generic.RegisterSelect = REG_COMMAND;
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
- srb->request_bufflen = 0;
+ isd200_srb_set_bufflen(srb, 0);
} else {
US_DEBUGP(" Media Status not supported, just report okay\n");
srb->result = SAM_STAT_GOOD;
@@ -1284,7 +1307,7 @@
ataCdb->generic.TransferBlockSize = 1;
ataCdb->generic.RegisterSelect = REG_COMMAND;
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
- srb->request_bufflen = 0;
+ isd200_srb_set_bufflen(srb, 0);
} else {
US_DEBUGP(" Media Status not supported, just report okay\n");
srb->result = SAM_STAT_GOOD;
@@ -1390,7 +1413,7 @@
ataCdb->generic.RegisterSelect = REG_COMMAND;
ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ?
WIN_DOORLOCK : WIN_DOORUNLOCK;
- srb->request_bufflen = 0;
+ isd200_srb_set_bufflen(srb, 0);
} else {
US_DEBUGP(" Not removeable media, just report okay\n");
srb->result = SAM_STAT_GOOD;
@@ -1416,7 +1439,7 @@
ataCdb->generic.TransferBlockSize = 1;
ataCdb->generic.RegisterSelect = REG_COMMAND;
ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
- srb->request_bufflen = 0;
+ isd200_srb_set_bufflen(srb, 0);
} else {
US_DEBUGP(" Nothing to do, just report okay\n");
srb->result = SAM_STAT_GOOD;
@@ -1525,7 +1548,7 @@
void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
{
- int sendToTransport = 1;
+ int sendToTransport = 1, orig_bufflen;
union ata_cdb ataCdb;
/* Make sure driver was initialized */
@@ -1533,11 +1556,14 @@
if (us->extra == NULL)
US_DEBUGP("ERROR Driver not initialized\n");
- /* Convert command */
- srb->resid = 0;
+ scsi_set_resid(srb, 0);
+ /* scsi_bufflen might change in protocol translation to ata */
+ orig_bufflen = scsi_bufflen(srb);
sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb);
/* send the command to the transport layer */
if (sendToTransport)
isd200_invoke_transport(us, srb, &ataCdb);
+
+ isd200_srb_set_bufflen(srb, orig_bufflen);
}