| /* |
| * AGPGART driver. |
| * Copyright (C) 2004 Silicon Graphics, Inc. |
| * Copyright (C) 2002-2005 Dave Jones. |
| * Copyright (C) 1999 Jeff Hartmann. |
| * Copyright (C) 1999 Precision Insight, Inc. |
| * Copyright (C) 1999 Xi Graphics, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included |
| * in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE |
| * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * TODO: |
| * - Allocate more than order 0 pages to avoid too much linear map splitting. |
| */ |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/pagemap.h> |
| #include <linux/miscdevice.h> |
| #include <linux/pm.h> |
| #include <linux/agp_backend.h> |
| #include <linux/vmalloc.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mm.h> |
| #include <asm/io.h> |
| #include <asm/cacheflush.h> |
| #include <asm/pgtable.h> |
| #include "agp.h" |
| |
| __u32 *agp_gatt_table; |
| int agp_memory_reserved; |
| |
| /* |
| * Needed by the Nforce GART driver for the time being. Would be |
| * nice to do this some other way instead of needing this export. |
| */ |
| EXPORT_SYMBOL_GPL(agp_memory_reserved); |
| |
| #if defined(CONFIG_X86) |
| int map_page_into_agp(struct page *page) |
| { |
| int i; |
| i = change_page_attr(page, 1, PAGE_KERNEL_NOCACHE); |
| global_flush_tlb(); |
| return i; |
| } |
| EXPORT_SYMBOL_GPL(map_page_into_agp); |
| |
| int unmap_page_from_agp(struct page *page) |
| { |
| int i; |
| i = change_page_attr(page, 1, PAGE_KERNEL); |
| global_flush_tlb(); |
| return i; |
| } |
| EXPORT_SYMBOL_GPL(unmap_page_from_agp); |
| #endif |
| |
| /* |
| * Generic routines for handling agp_memory structures - |
| * They use the basic page allocation routines to do the brunt of the work. |
| */ |
| |
| void agp_free_key(int key) |
| { |
| if (key < 0) |
| return; |
| |
| if (key < MAXKEY) |
| clear_bit(key, agp_bridge->key_list); |
| } |
| EXPORT_SYMBOL(agp_free_key); |
| |
| |
| static int agp_get_key(void) |
| { |
| int bit; |
| |
| bit = find_first_zero_bit(agp_bridge->key_list, MAXKEY); |
| if (bit < MAXKEY) { |
| set_bit(bit, agp_bridge->key_list); |
| return bit; |
| } |
| return -1; |
| } |
| |
| |
| struct agp_memory *agp_create_memory(int scratch_pages) |
| { |
| struct agp_memory *new; |
| |
| new = kmalloc(sizeof(struct agp_memory), GFP_KERNEL); |
| |
| if (new == NULL) |
| return NULL; |
| |
| memset(new, 0, sizeof(struct agp_memory)); |
| new->key = agp_get_key(); |
| |
| if (new->key < 0) { |
| kfree(new); |
| return NULL; |
| } |
| new->memory = vmalloc(PAGE_SIZE * scratch_pages); |
| |
| if (new->memory == NULL) { |
| agp_free_key(new->key); |
| kfree(new); |
| return NULL; |
| } |
| new->num_scratch_pages = scratch_pages; |
| return new; |
| } |
| EXPORT_SYMBOL(agp_create_memory); |
| |
| /** |
| * agp_free_memory - free memory associated with an agp_memory pointer. |
| * |
| * @curr: agp_memory pointer to be freed. |
| * |
| * It is the only function that can be called when the backend is not owned |
| * by the caller. (So it can free memory on client death.) |
| */ |
| void agp_free_memory(struct agp_memory *curr) |
| { |
| size_t i; |
| |
| if (curr == NULL) |
| return; |
| |
| if (curr->is_bound == TRUE) |
| agp_unbind_memory(curr); |
| |
| if (curr->type != 0) { |
| curr->bridge->driver->free_by_type(curr); |
| return; |
| } |
| if (curr->page_count != 0) { |
| for (i = 0; i < curr->page_count; i++) { |
| curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i])); |
| } |
| } |
| agp_free_key(curr->key); |
| vfree(curr->memory); |
| kfree(curr); |
| } |
| EXPORT_SYMBOL(agp_free_memory); |
| |
| #define ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) |
| |
| /** |
| * agp_allocate_memory - allocate a group of pages of a certain type. |
| * |
| * @page_count: size_t argument of the number of pages |
| * @type: u32 argument of the type of memory to be allocated. |
| * |
| * Every agp bridge device will allow you to allocate AGP_NORMAL_MEMORY which |
| * maps to physical ram. Any other type is device dependent. |
| * |
| * It returns NULL whenever memory is unavailable. |
| */ |
| struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge, |
| size_t page_count, u32 type) |
| { |
| int scratch_pages; |
| struct agp_memory *new; |
| size_t i; |
| |
| if (!bridge) |
| return NULL; |
| |
| if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp) |
| return NULL; |
| |
| if (type != 0) { |
| new = bridge->driver->alloc_by_type(page_count, type); |
| if (new) |
| new->bridge = bridge; |
| return new; |
| } |
| |
| scratch_pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE; |
| |
| new = agp_create_memory(scratch_pages); |
| |
| if (new == NULL) |
| return NULL; |
| |
| for (i = 0; i < page_count; i++) { |
| void *addr = bridge->driver->agp_alloc_page(bridge); |
| |
| if (addr == NULL) { |
| agp_free_memory(new); |
| return NULL; |
| } |
| new->memory[i] = virt_to_gart(addr); |
| new->page_count++; |
| } |
| new->bridge = bridge; |
| |
| flush_agp_mappings(); |
| |
| return new; |
| } |
| EXPORT_SYMBOL(agp_allocate_memory); |
| |
| |
| /* End - Generic routines for handling agp_memory structures */ |
| |
| |
| static int agp_return_size(void) |
| { |
| int current_size; |
| void *temp; |
| |
| temp = agp_bridge->current_size; |
| |
| switch (agp_bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| current_size = A_SIZE_8(temp)->size; |
| break; |
| case U16_APER_SIZE: |
| current_size = A_SIZE_16(temp)->size; |
| break; |
| case U32_APER_SIZE: |
| current_size = A_SIZE_32(temp)->size; |
| break; |
| case LVL2_APER_SIZE: |
| current_size = A_SIZE_LVL2(temp)->size; |
| break; |
| case FIXED_APER_SIZE: |
| current_size = A_SIZE_FIX(temp)->size; |
| break; |
| default: |
| current_size = 0; |
| break; |
| } |
| |
| current_size -= (agp_memory_reserved / (1024*1024)); |
| if (current_size <0) |
| current_size = 0; |
| return current_size; |
| } |
| |
| |
| int agp_num_entries(void) |
| { |
| int num_entries; |
| void *temp; |
| |
| temp = agp_bridge->current_size; |
| |
| switch (agp_bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| num_entries = A_SIZE_8(temp)->num_entries; |
| break; |
| case U16_APER_SIZE: |
| num_entries = A_SIZE_16(temp)->num_entries; |
| break; |
| case U32_APER_SIZE: |
| num_entries = A_SIZE_32(temp)->num_entries; |
| break; |
| case LVL2_APER_SIZE: |
| num_entries = A_SIZE_LVL2(temp)->num_entries; |
| break; |
| case FIXED_APER_SIZE: |
| num_entries = A_SIZE_FIX(temp)->num_entries; |
| break; |
| default: |
| num_entries = 0; |
| break; |
| } |
| |
| num_entries -= agp_memory_reserved>>PAGE_SHIFT; |
| if (num_entries<0) |
| num_entries = 0; |
| return num_entries; |
| } |
| EXPORT_SYMBOL_GPL(agp_num_entries); |
| |
| |
| /** |
| * agp_copy_info - copy bridge state information |
| * |
| * @info: agp_kern_info pointer. The caller should insure that this pointer is valid. |
| * |
| * This function copies information about the agp bridge device and the state of |
| * the agp backend into an agp_kern_info pointer. |
| */ |
| int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info) |
| { |
| memset(info, 0, sizeof(struct agp_kern_info)); |
| if (!bridge) { |
| info->chipset = NOT_SUPPORTED; |
| return -EIO; |
| } |
| |
| info->version.major = bridge->version->major; |
| info->version.minor = bridge->version->minor; |
| info->chipset = SUPPORTED; |
| info->device = bridge->dev; |
| if (bridge->mode & AGPSTAT_MODE_3_0) |
| info->mode = bridge->mode & ~AGP3_RESERVED_MASK; |
| else |
| info->mode = bridge->mode & ~AGP2_RESERVED_MASK; |
| info->mode = bridge->mode; |
| info->aper_base = bridge->gart_bus_addr; |
| info->aper_size = agp_return_size(); |
| info->max_memory = bridge->max_memory_agp; |
| info->current_memory = atomic_read(&bridge->current_memory_agp); |
| info->cant_use_aperture = bridge->driver->cant_use_aperture; |
| info->vm_ops = bridge->vm_ops; |
| info->page_mask = ~0UL; |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_copy_info); |
| |
| /* End - Routine to copy over information structure */ |
| |
| /* |
| * Routines for handling swapping of agp_memory into the GATT - |
| * These routines take agp_memory and insert them into the GATT. |
| * They call device specific routines to actually write to the GATT. |
| */ |
| |
| /** |
| * agp_bind_memory - Bind an agp_memory structure into the GATT. |
| * |
| * @curr: agp_memory pointer |
| * @pg_start: an offset into the graphics aperture translation table |
| * |
| * It returns -EINVAL if the pointer == NULL. |
| * It returns -EBUSY if the area of the table requested is already in use. |
| */ |
| int agp_bind_memory(struct agp_memory *curr, off_t pg_start) |
| { |
| int ret_val; |
| |
| if (curr == NULL) |
| return -EINVAL; |
| |
| if (curr->is_bound == TRUE) { |
| printk (KERN_INFO PFX "memory %p is already bound!\n", curr); |
| return -EINVAL; |
| } |
| if (curr->is_flushed == FALSE) { |
| curr->bridge->driver->cache_flush(); |
| curr->is_flushed = TRUE; |
| } |
| ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type); |
| |
| if (ret_val != 0) |
| return ret_val; |
| |
| curr->is_bound = TRUE; |
| curr->pg_start = pg_start; |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_bind_memory); |
| |
| |
| /** |
| * agp_unbind_memory - Removes an agp_memory structure from the GATT |
| * |
| * @curr: agp_memory pointer to be removed from the GATT. |
| * |
| * It returns -EINVAL if this piece of agp_memory is not currently bound to |
| * the graphics aperture translation table or if the agp_memory pointer == NULL |
| */ |
| int agp_unbind_memory(struct agp_memory *curr) |
| { |
| int ret_val; |
| |
| if (curr == NULL) |
| return -EINVAL; |
| |
| if (curr->is_bound != TRUE) { |
| printk (KERN_INFO PFX "memory %p was not bound!\n", curr); |
| return -EINVAL; |
| } |
| |
| ret_val = curr->bridge->driver->remove_memory(curr, curr->pg_start, curr->type); |
| |
| if (ret_val != 0) |
| return ret_val; |
| |
| curr->is_bound = FALSE; |
| curr->pg_start = 0; |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_unbind_memory); |
| |
| /* End - Routines for handling swapping of agp_memory into the GATT */ |
| |
| |
| /* Generic Agp routines - Start */ |
| static void agp_v2_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat) |
| { |
| u32 tmp; |
| |
| if (*requested_mode & AGP2_RESERVED_MASK) { |
| printk (KERN_INFO PFX "reserved bits set in mode 0x%x. Fixed.\n", *requested_mode); |
| *requested_mode &= ~AGP2_RESERVED_MASK; |
| } |
| |
| /* Check the speed bits make sense. Only one should be set. */ |
| tmp = *requested_mode & 7; |
| switch (tmp) { |
| case 0: |
| printk (KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm); |
| *requested_mode |= AGPSTAT2_1X; |
| break; |
| case 1: |
| case 2: |
| break; |
| case 3: |
| *requested_mode &= ~(AGPSTAT2_1X); /* rate=2 */ |
| break; |
| case 4: |
| break; |
| case 5: |
| case 6: |
| case 7: |
| *requested_mode &= ~(AGPSTAT2_1X|AGPSTAT2_2X); /* rate=4*/ |
| break; |
| } |
| |
| /* disable SBA if it's not supported */ |
| if (!((*bridge_agpstat & AGPSTAT_SBA) && (*vga_agpstat & AGPSTAT_SBA) && (*requested_mode & AGPSTAT_SBA))) |
| *bridge_agpstat &= ~AGPSTAT_SBA; |
| |
| /* Set rate */ |
| if (!((*bridge_agpstat & AGPSTAT2_4X) && (*vga_agpstat & AGPSTAT2_4X) && (*requested_mode & AGPSTAT2_4X))) |
| *bridge_agpstat &= ~AGPSTAT2_4X; |
| |
| if (!((*bridge_agpstat & AGPSTAT2_2X) && (*vga_agpstat & AGPSTAT2_2X) && (*requested_mode & AGPSTAT2_2X))) |
| *bridge_agpstat &= ~AGPSTAT2_2X; |
| |
| if (!((*bridge_agpstat & AGPSTAT2_1X) && (*vga_agpstat & AGPSTAT2_1X) && (*requested_mode & AGPSTAT2_1X))) |
| *bridge_agpstat &= ~AGPSTAT2_1X; |
| |
| /* Now we know what mode it should be, clear out the unwanted bits. */ |
| if (*bridge_agpstat & AGPSTAT2_4X) |
| *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_2X); /* 4X */ |
| |
| if (*bridge_agpstat & AGPSTAT2_2X) |
| *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_4X); /* 2X */ |
| |
| if (*bridge_agpstat & AGPSTAT2_1X) |
| *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X); /* 1X */ |
| |
| /* Apply any errata. */ |
| if (agp_bridge->flags & AGP_ERRATA_FASTWRITES) |
| *bridge_agpstat &= ~AGPSTAT_FW; |
| |
| if (agp_bridge->flags & AGP_ERRATA_SBA) |
| *bridge_agpstat &= ~AGPSTAT_SBA; |
| |
| if (agp_bridge->flags & AGP_ERRATA_1X) { |
| *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X); |
| *bridge_agpstat |= AGPSTAT2_1X; |
| } |
| |
| /* If we've dropped down to 1X, disable fast writes. */ |
| if (*bridge_agpstat & AGPSTAT2_1X) |
| *bridge_agpstat &= ~AGPSTAT_FW; |
| } |
| |
| /* |
| * requested_mode = Mode requested by (typically) X. |
| * bridge_agpstat = PCI_AGP_STATUS from agp bridge. |
| * vga_agpstat = PCI_AGP_STATUS from graphic card. |
| */ |
| static void agp_v3_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat) |
| { |
| u32 origbridge=*bridge_agpstat, origvga=*vga_agpstat; |
| u32 tmp; |
| |
| if (*requested_mode & AGP3_RESERVED_MASK) { |
| printk (KERN_INFO PFX "reserved bits set in mode 0x%x. Fixed.\n", *requested_mode); |
| *requested_mode &= ~AGP3_RESERVED_MASK; |
| } |
| |
| /* Check the speed bits make sense. */ |
| tmp = *requested_mode & 7; |
| if (tmp == 0) { |
| printk (KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm); |
| *requested_mode |= AGPSTAT3_4X; |
| } |
| if (tmp >= 3) { |
| printk (KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4); |
| *requested_mode = (*requested_mode & ~7) | AGPSTAT3_8X; |
| } |
| |
| /* ARQSZ - Set the value to the maximum one. |
| * Don't allow the mode register to override values. */ |
| *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_ARQSZ) | |
| max_t(u32,(*bridge_agpstat & AGPSTAT_ARQSZ),(*vga_agpstat & AGPSTAT_ARQSZ))); |
| |
| /* Calibration cycle. |
| * Don't allow the mode register to override values. */ |
| *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_CAL_MASK) | |
| min_t(u32,(*bridge_agpstat & AGPSTAT_CAL_MASK),(*vga_agpstat & AGPSTAT_CAL_MASK))); |
| |
| /* SBA *must* be supported for AGP v3 */ |
| *bridge_agpstat |= AGPSTAT_SBA; |
| |
| /* |
| * Set speed. |
| * Check for invalid speeds. This can happen when applications |
| * written before the AGP 3.0 standard pass AGP2.x modes to AGP3 hardware |
| */ |
| if (*requested_mode & AGPSTAT_MODE_3_0) { |
| /* |
| * Caller hasn't a clue what it is doing. Bridge is in 3.0 mode, |
| * have been passed a 3.0 mode, but with 2.x speed bits set. |
| * AGP2.x 4x -> AGP3.0 4x. |
| */ |
| if (*requested_mode & AGPSTAT2_4X) { |
| printk (KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n", |
| current->comm, *requested_mode); |
| *requested_mode &= ~AGPSTAT2_4X; |
| *requested_mode |= AGPSTAT3_4X; |
| } |
| } else { |
| /* |
| * The caller doesn't know what they are doing. We are in 3.0 mode, |
| * but have been passed an AGP 2.x mode. |
| * Convert AGP 1x,2x,4x -> AGP 3.0 4x. |
| */ |
| printk (KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n", |
| current->comm, *requested_mode); |
| *requested_mode &= ~(AGPSTAT2_4X | AGPSTAT2_2X | AGPSTAT2_1X); |
| *requested_mode |= AGPSTAT3_4X; |
| } |
| |
| if (*requested_mode & AGPSTAT3_8X) { |
| if (!(*bridge_agpstat & AGPSTAT3_8X)) { |
| *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD); |
| *bridge_agpstat |= AGPSTAT3_4X; |
| printk ("%s requested AGPx8 but bridge not capable.\n", current->comm); |
| return; |
| } |
| if (!(*vga_agpstat & AGPSTAT3_8X)) { |
| *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD); |
| *bridge_agpstat |= AGPSTAT3_4X; |
| printk ("%s requested AGPx8 but graphic card not capable.\n", current->comm); |
| return; |
| } |
| /* All set, bridge & device can do AGP x8*/ |
| *bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD); |
| goto done; |
| |
| } else { |
| |
| /* |
| * If we didn't specify AGPx8, we can only do x4. |
| * If the hardware can't do x4, we're up shit creek, and never |
| * should have got this far. |
| */ |
| *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD); |
| if ((*bridge_agpstat & AGPSTAT3_4X) && (*vga_agpstat & AGPSTAT3_4X)) |
| *bridge_agpstat |= AGPSTAT3_4X; |
| else { |
| printk (KERN_INFO PFX "Badness. Don't know which AGP mode to set. " |
| "[bridge_agpstat:%x vga_agpstat:%x fell back to:- bridge_agpstat:%x vga_agpstat:%x]\n", |
| origbridge, origvga, *bridge_agpstat, *vga_agpstat); |
| if (!(*bridge_agpstat & AGPSTAT3_4X)) |
| printk (KERN_INFO PFX "Bridge couldn't do AGP x4.\n"); |
| if (!(*vga_agpstat & AGPSTAT3_4X)) |
| printk (KERN_INFO PFX "Graphic card couldn't do AGP x4.\n"); |
| return; |
| } |
| } |
| |
| done: |
| /* Apply any errata. */ |
| if (agp_bridge->flags & AGP_ERRATA_FASTWRITES) |
| *bridge_agpstat &= ~AGPSTAT_FW; |
| |
| if (agp_bridge->flags & AGP_ERRATA_SBA) |
| *bridge_agpstat &= ~AGPSTAT_SBA; |
| |
| if (agp_bridge->flags & AGP_ERRATA_1X) { |
| *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X); |
| *bridge_agpstat |= AGPSTAT2_1X; |
| } |
| } |
| |
| |
| /** |
| * agp_collect_device_status - determine correct agp_cmd from various agp_stat's |
| * @bridge: an agp_bridge_data struct allocated for the AGP host bridge. |
| * @requested_mode: requested agp_stat from userspace (Typically from X) |
| * @bridge_agpstat: current agp_stat from AGP bridge. |
| * |
| * This function will hunt for an AGP graphics card, and try to match |
| * the requested mode to the capabilities of both the bridge and the card. |
| */ |
| u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode, u32 bridge_agpstat) |
| { |
| struct pci_dev *device = NULL; |
| u32 vga_agpstat; |
| u8 cap_ptr; |
| |
| for (;;) { |
| device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, device); |
| if (!device) { |
| printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n"); |
| return 0; |
| } |
| cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP); |
| if (cap_ptr) |
| break; |
| } |
| |
| /* |
| * Ok, here we have a AGP device. Disable impossible |
| * settings, and adjust the readqueue to the minimum. |
| */ |
| pci_read_config_dword(device, cap_ptr+PCI_AGP_STATUS, &vga_agpstat); |
| |
| /* adjust RQ depth */ |
| bridge_agpstat = ((bridge_agpstat & ~AGPSTAT_RQ_DEPTH) | |
| min_t(u32, (requested_mode & AGPSTAT_RQ_DEPTH), |
| min_t(u32, (bridge_agpstat & AGPSTAT_RQ_DEPTH), (vga_agpstat & AGPSTAT_RQ_DEPTH)))); |
| |
| /* disable FW if it's not supported */ |
| if (!((bridge_agpstat & AGPSTAT_FW) && |
| (vga_agpstat & AGPSTAT_FW) && |
| (requested_mode & AGPSTAT_FW))) |
| bridge_agpstat &= ~AGPSTAT_FW; |
| |
| /* Check to see if we are operating in 3.0 mode */ |
| if (agp_bridge->mode & AGPSTAT_MODE_3_0) |
| agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); |
| else |
| agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); |
| |
| pci_dev_put(device); |
| return bridge_agpstat; |
| } |
| EXPORT_SYMBOL(agp_collect_device_status); |
| |
| |
| void agp_device_command(u32 bridge_agpstat, int agp_v3) |
| { |
| struct pci_dev *device = NULL; |
| int mode; |
| |
| mode = bridge_agpstat & 0x7; |
| if (agp_v3) |
| mode *= 4; |
| |
| for_each_pci_dev(device) { |
| u8 agp = pci_find_capability(device, PCI_CAP_ID_AGP); |
| if (!agp) |
| continue; |
| |
| printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n", |
| agp_v3 ? 3 : 2, pci_name(device), mode); |
| pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat); |
| } |
| } |
| EXPORT_SYMBOL(agp_device_command); |
| |
| |
| void get_agp_version(struct agp_bridge_data *bridge) |
| { |
| u32 ncapid; |
| |
| /* Exit early if already set by errata workarounds. */ |
| if (bridge->major_version != 0) |
| return; |
| |
| pci_read_config_dword(bridge->dev, bridge->capndx, &ncapid); |
| bridge->major_version = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf; |
| bridge->minor_version = (ncapid >> AGP_MINOR_VERSION_SHIFT) & 0xf; |
| } |
| EXPORT_SYMBOL(get_agp_version); |
| |
| |
| void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) |
| { |
| u32 bridge_agpstat, temp; |
| |
| get_agp_version(agp_bridge); |
| |
| printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n", |
| agp_bridge->major_version, |
| agp_bridge->minor_version, |
| pci_name(agp_bridge->dev)); |
| |
| pci_read_config_dword(agp_bridge->dev, |
| agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat); |
| |
| bridge_agpstat = agp_collect_device_status(agp_bridge, requested_mode, bridge_agpstat); |
| if (bridge_agpstat == 0) |
| /* Something bad happened. FIXME: Return error code? */ |
| return; |
| |
| bridge_agpstat |= AGPSTAT_AGP_ENABLE; |
| |
| /* Do AGP version specific frobbing. */ |
| if (bridge->major_version >= 3) { |
| if (bridge->mode & AGPSTAT_MODE_3_0) { |
| /* If we have 3.5, we can do the isoch stuff. */ |
| if (bridge->minor_version >= 5) |
| agp_3_5_enable(bridge); |
| agp_device_command(bridge_agpstat, TRUE); |
| return; |
| } else { |
| /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/ |
| bridge_agpstat &= ~(7<<10) ; |
| pci_read_config_dword(bridge->dev, |
| bridge->capndx+AGPCTRL, &temp); |
| temp |= (1<<9); |
| pci_write_config_dword(bridge->dev, |
| bridge->capndx+AGPCTRL, temp); |
| |
| printk (KERN_INFO PFX "Device is in legacy mode," |
| " falling back to 2.x\n"); |
| } |
| } |
| |
| /* AGP v<3 */ |
| agp_device_command(bridge_agpstat, FALSE); |
| } |
| EXPORT_SYMBOL(agp_generic_enable); |
| |
| |
| int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) |
| { |
| char *table; |
| char *table_end; |
| int size; |
| int page_order; |
| int num_entries; |
| int i; |
| void *temp; |
| struct page *page; |
| |
| /* The generic routines can't handle 2 level gatt's */ |
| if (bridge->driver->size_type == LVL2_APER_SIZE) |
| return -EINVAL; |
| |
| table = NULL; |
| i = bridge->aperture_size_idx; |
| temp = bridge->current_size; |
| size = page_order = num_entries = 0; |
| |
| if (bridge->driver->size_type != FIXED_APER_SIZE) { |
| do { |
| switch (bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| size = A_SIZE_8(temp)->size; |
| page_order = |
| A_SIZE_8(temp)->page_order; |
| num_entries = |
| A_SIZE_8(temp)->num_entries; |
| break; |
| case U16_APER_SIZE: |
| size = A_SIZE_16(temp)->size; |
| page_order = A_SIZE_16(temp)->page_order; |
| num_entries = A_SIZE_16(temp)->num_entries; |
| break; |
| case U32_APER_SIZE: |
| size = A_SIZE_32(temp)->size; |
| page_order = A_SIZE_32(temp)->page_order; |
| num_entries = A_SIZE_32(temp)->num_entries; |
| break; |
| /* This case will never really happen. */ |
| case FIXED_APER_SIZE: |
| case LVL2_APER_SIZE: |
| default: |
| size = page_order = num_entries = 0; |
| break; |
| } |
| |
| table = alloc_gatt_pages(page_order); |
| |
| if (table == NULL) { |
| i++; |
| switch (bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| bridge->current_size = A_IDX8(bridge); |
| break; |
| case U16_APER_SIZE: |
| bridge->current_size = A_IDX16(bridge); |
| break; |
| case U32_APER_SIZE: |
| bridge->current_size = A_IDX32(bridge); |
| break; |
| /* This case will never really happen. */ |
| case FIXED_APER_SIZE: |
| case LVL2_APER_SIZE: |
| default: |
| bridge->current_size = |
| bridge->current_size; |
| break; |
| } |
| temp = bridge->current_size; |
| } else { |
| bridge->aperture_size_idx = i; |
| } |
| } while (!table && (i < bridge->driver->num_aperture_sizes)); |
| } else { |
| size = ((struct aper_size_info_fixed *) temp)->size; |
| page_order = ((struct aper_size_info_fixed *) temp)->page_order; |
| num_entries = ((struct aper_size_info_fixed *) temp)->num_entries; |
| table = alloc_gatt_pages(page_order); |
| } |
| |
| if (table == NULL) |
| return -ENOMEM; |
| |
| table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); |
| |
| for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) |
| SetPageReserved(page); |
| |
| bridge->gatt_table_real = (u32 *) table; |
| agp_gatt_table = (void *)table; |
| |
| bridge->driver->cache_flush(); |
| bridge->gatt_table = ioremap_nocache(virt_to_gart(table), |
| (PAGE_SIZE * (1 << page_order))); |
| bridge->driver->cache_flush(); |
| |
| if (bridge->gatt_table == NULL) { |
| for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) |
| ClearPageReserved(page); |
| |
| free_gatt_pages(table, page_order); |
| |
| return -ENOMEM; |
| } |
| bridge->gatt_bus_addr = virt_to_gart(bridge->gatt_table_real); |
| |
| /* AK: bogus, should encode addresses > 4GB */ |
| for (i = 0; i < num_entries; i++) { |
| writel(bridge->scratch_page, bridge->gatt_table+i); |
| readl(bridge->gatt_table+i); /* PCI Posting. */ |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_generic_create_gatt_table); |
| |
| int agp_generic_free_gatt_table(struct agp_bridge_data *bridge) |
| { |
| int page_order; |
| char *table, *table_end; |
| void *temp; |
| struct page *page; |
| |
| temp = bridge->current_size; |
| |
| switch (bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| page_order = A_SIZE_8(temp)->page_order; |
| break; |
| case U16_APER_SIZE: |
| page_order = A_SIZE_16(temp)->page_order; |
| break; |
| case U32_APER_SIZE: |
| page_order = A_SIZE_32(temp)->page_order; |
| break; |
| case FIXED_APER_SIZE: |
| page_order = A_SIZE_FIX(temp)->page_order; |
| break; |
| case LVL2_APER_SIZE: |
| /* The generic routines can't deal with 2 level gatt's */ |
| return -EINVAL; |
| break; |
| default: |
| page_order = 0; |
| break; |
| } |
| |
| /* Do not worry about freeing memory, because if this is |
| * called, then all agp memory is deallocated and removed |
| * from the table. */ |
| |
| iounmap(bridge->gatt_table); |
| table = (char *) bridge->gatt_table_real; |
| table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); |
| |
| for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) |
| ClearPageReserved(page); |
| |
| free_gatt_pages(bridge->gatt_table_real, page_order); |
| |
| agp_gatt_table = NULL; |
| bridge->gatt_table = NULL; |
| bridge->gatt_table_real = NULL; |
| bridge->gatt_bus_addr = 0; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_generic_free_gatt_table); |
| |
| |
| int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) |
| { |
| int num_entries; |
| size_t i; |
| off_t j; |
| void *temp; |
| struct agp_bridge_data *bridge; |
| |
| bridge = mem->bridge; |
| if (!bridge) |
| return -EINVAL; |
| |
| temp = bridge->current_size; |
| |
| switch (bridge->driver->size_type) { |
| case U8_APER_SIZE: |
| num_entries = A_SIZE_8(temp)->num_entries; |
| break; |
| case U16_APER_SIZE: |
| num_entries = A_SIZE_16(temp)->num_entries; |
| break; |
| case U32_APER_SIZE: |
| num_entries = A_SIZE_32(temp)->num_entries; |
| break; |
| case FIXED_APER_SIZE: |
| num_entries = A_SIZE_FIX(temp)->num_entries; |
| break; |
| case LVL2_APER_SIZE: |
| /* The generic routines can't deal with 2 level gatt's */ |
| return -EINVAL; |
| break; |
| default: |
| num_entries = 0; |
| break; |
| } |
| |
| num_entries -= agp_memory_reserved/PAGE_SIZE; |
| if (num_entries < 0) num_entries = 0; |
| |
| if (type != 0 || mem->type != 0) { |
| /* The generic routines know nothing of memory types */ |
| return -EINVAL; |
| } |
| |
| /* AK: could wrap */ |
| if ((pg_start + mem->page_count) > num_entries) |
| return -EINVAL; |
| |
| j = pg_start; |
| |
| while (j < (pg_start + mem->page_count)) { |
| if (!PGE_EMPTY(bridge, readl(bridge->gatt_table+j))) |
| return -EBUSY; |
| j++; |
| } |
| |
| if (mem->is_flushed == FALSE) { |
| bridge->driver->cache_flush(); |
| mem->is_flushed = TRUE; |
| } |
| |
| for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { |
| writel(bridge->driver->mask_memory(bridge, mem->memory[i], mem->type), bridge->gatt_table+j); |
| readl(bridge->gatt_table+j); /* PCI Posting. */ |
| } |
| |
| bridge->driver->tlb_flush(mem); |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_generic_insert_memory); |
| |
| |
| int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type) |
| { |
| size_t i; |
| struct agp_bridge_data *bridge; |
| |
| bridge = mem->bridge; |
| if (!bridge) |
| return -EINVAL; |
| |
| if (type != 0 || mem->type != 0) { |
| /* The generic routines know nothing of memory types */ |
| return -EINVAL; |
| } |
| |
| /* AK: bogus, should encode addresses > 4GB */ |
| for (i = pg_start; i < (mem->page_count + pg_start); i++) { |
| writel(bridge->scratch_page, bridge->gatt_table+i); |
| readl(bridge->gatt_table+i); /* PCI Posting. */ |
| } |
| |
| global_cache_flush(); |
| bridge->driver->tlb_flush(mem); |
| return 0; |
| } |
| EXPORT_SYMBOL(agp_generic_remove_memory); |
| |
| |
| struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type) |
| { |
| return NULL; |
| } |
| EXPORT_SYMBOL(agp_generic_alloc_by_type); |
| |
| |
| void agp_generic_free_by_type(struct agp_memory *curr) |
| { |
| vfree(curr->memory); |
| agp_free_key(curr->key); |
| kfree(curr); |
| } |
| EXPORT_SYMBOL(agp_generic_free_by_type); |
| |
| |
| /* |
| * Basic Page Allocation Routines - |
| * These routines handle page allocation and by default they reserve the allocated |
| * memory. They also handle incrementing the current_memory_agp value, Which is checked |
| * against a maximum value. |
| */ |
| |
| void *agp_generic_alloc_page(struct agp_bridge_data *bridge) |
| { |
| struct page * page; |
| |
| page = alloc_page(GFP_KERNEL); |
| if (page == NULL) |
| return NULL; |
| |
| map_page_into_agp(page); |
| |
| get_page(page); |
| SetPageLocked(page); |
| atomic_inc(&agp_bridge->current_memory_agp); |
| return page_address(page); |
| } |
| EXPORT_SYMBOL(agp_generic_alloc_page); |
| |
| |
| void agp_generic_destroy_page(void *addr) |
| { |
| struct page *page; |
| |
| if (addr == NULL) |
| return; |
| |
| page = virt_to_page(addr); |
| unmap_page_from_agp(page); |
| put_page(page); |
| unlock_page(page); |
| free_page((unsigned long)addr); |
| atomic_dec(&agp_bridge->current_memory_agp); |
| } |
| EXPORT_SYMBOL(agp_generic_destroy_page); |
| |
| /* End Basic Page Allocation Routines */ |
| |
| |
| /** |
| * agp_enable - initialise the agp point-to-point connection. |
| * |
| * @mode: agp mode register value to configure with. |
| */ |
| void agp_enable(struct agp_bridge_data *bridge, u32 mode) |
| { |
| if (!bridge) |
| return; |
| bridge->driver->agp_enable(bridge, mode); |
| } |
| EXPORT_SYMBOL(agp_enable); |
| |
| /* When we remove the global variable agp_bridge from all drivers |
| * then agp_alloc_bridge and agp_generic_find_bridge need to be updated |
| */ |
| |
| struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev) |
| { |
| if (list_empty(&agp_bridges)) |
| return NULL; |
| |
| return agp_bridge; |
| } |
| |
| static void ipi_handler(void *null) |
| { |
| flush_agp_cache(); |
| } |
| |
| void global_cache_flush(void) |
| { |
| if (on_each_cpu(ipi_handler, NULL, 1, 1) != 0) |
| panic(PFX "timed out waiting for the other CPUs!\n"); |
| } |
| EXPORT_SYMBOL(global_cache_flush); |
| |
| unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge, |
| unsigned long addr, int type) |
| { |
| /* memory type is ignored in the generic routine */ |
| if (bridge->driver->masks) |
| return addr | bridge->driver->masks[0].mask; |
| else |
| return addr; |
| } |
| EXPORT_SYMBOL(agp_generic_mask_memory); |
| |
| /* |
| * These functions are implemented according to the AGPv3 spec, |
| * which covers implementation details that had previously been |
| * left open. |
| */ |
| |
| int agp3_generic_fetch_size(void) |
| { |
| u16 temp_size; |
| int i; |
| struct aper_size_info_16 *values; |
| |
| pci_read_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, &temp_size); |
| values = A_SIZE_16(agp_bridge->driver->aperture_sizes); |
| |
| for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { |
| if (temp_size == values[i].size_value) { |
| agp_bridge->previous_size = |
| agp_bridge->current_size = (void *) (values + i); |
| |
| agp_bridge->aperture_size_idx = i; |
| return values[i].size; |
| } |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(agp3_generic_fetch_size); |
| |
| void agp3_generic_tlbflush(struct agp_memory *mem) |
| { |
| u32 ctrl; |
| pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl); |
| pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_GTLBEN); |
| pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl); |
| } |
| EXPORT_SYMBOL(agp3_generic_tlbflush); |
| |
| int agp3_generic_configure(void) |
| { |
| u32 temp; |
| struct aper_size_info_16 *current_size; |
| |
| current_size = A_SIZE_16(agp_bridge->current_size); |
| |
| pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp); |
| agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); |
| |
| /* set aperture size */ |
| pci_write_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, current_size->size_value); |
| /* set gart pointer */ |
| pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPGARTLO, agp_bridge->gatt_bus_addr); |
| /* enable aperture and GTLB */ |
| pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &temp); |
| pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, temp | AGPCTRL_APERENB | AGPCTRL_GTLBEN); |
| return 0; |
| } |
| EXPORT_SYMBOL(agp3_generic_configure); |
| |
| void agp3_generic_cleanup(void) |
| { |
| u32 ctrl; |
| pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl); |
| pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_APERENB); |
| } |
| EXPORT_SYMBOL(agp3_generic_cleanup); |
| |
| struct aper_size_info_16 agp3_generic_sizes[AGP_GENERIC_SIZES_ENTRIES] = |
| { |
| {4096, 1048576, 10,0x000}, |
| {2048, 524288, 9, 0x800}, |
| {1024, 262144, 8, 0xc00}, |
| { 512, 131072, 7, 0xe00}, |
| { 256, 65536, 6, 0xf00}, |
| { 128, 32768, 5, 0xf20}, |
| { 64, 16384, 4, 0xf30}, |
| { 32, 8192, 3, 0xf38}, |
| { 16, 4096, 2, 0xf3c}, |
| { 8, 2048, 1, 0xf3e}, |
| { 4, 1024, 0, 0xf3f} |
| }; |
| EXPORT_SYMBOL(agp3_generic_sizes); |
| |