V4L/DVB (10432): gspca - vc032x: Cleanup source, optimize and check i2c_write.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index be1507a..f8d535c 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -1927,44 +1927,40 @@
500);
}
-static void read_sensor_register(struct gspca_dev *gspca_dev,
- __u16 address, __u16 *value)
+static u16 read_sensor_register(struct gspca_dev *gspca_dev,
+ u16 address)
{
struct usb_device *dev = gspca_dev->dev;
__u8 ldata, mdata, hdata;
int retry = 50;
- *value = 0;
-
reg_r(gspca_dev, 0xa1, 0xb33f, 1);
- /*PDEBUG(D_PROBE, " I2c Bus Busy Wait 0x%02X ", tmpvalue); */
if (!(gspca_dev->usb_buf[0] & 0x02)) {
- PDEBUG(D_ERR, "I2c Bus Busy Wait %d",
- gspca_dev->usb_buf[0] & 0x02);
- return;
+ PDEBUG(D_ERR, "I2c Bus Busy Wait %02x",
+ gspca_dev->usb_buf[0]);
+ return 0;
}
reg_w(dev, 0xa0, address, 0xb33a);
reg_w(dev, 0xa0, 0x02, 0xb339);
- reg_r(gspca_dev, 0xa1, 0xb33b, 1);
- while (retry-- && gspca_dev->usb_buf[0]) {
+ do {
+ msleep(8);
reg_r(gspca_dev, 0xa1, 0xb33b, 1);
-/* PDEBUG(D_PROBE, "Read again 0xb33b %d", tmpvalue); */
- msleep(1);
- }
+ } while (retry-- && gspca_dev->usb_buf[0]);
+
reg_r(gspca_dev, 0xa1, 0xb33e, 1);
ldata = gspca_dev->usb_buf[0];
reg_r(gspca_dev, 0xa1, 0xb33d, 1);
mdata = gspca_dev->usb_buf[0];
reg_r(gspca_dev, 0xa1, 0xb33c, 1);
hdata = gspca_dev->usb_buf[0];
- PDEBUG(D_PROBE, "Read Sensor %02x%02x %02x",
- hdata, mdata, ldata);
+ if (hdata != 0 && mdata != 0 && ldata != 0)
+ PDEBUG(D_PROBE, "Read Sensor %02x%02x %02x",
+ hdata, mdata, ldata);
reg_r(gspca_dev, 0xa1, 0xb334, 1);
if (gspca_dev->usb_buf[0] == 0x02)
- *value = (hdata << 8) + mdata;
- else
- *value = hdata;
+ return (hdata << 8) + mdata;
+ return hdata;
}
static int vc032x_probe_sensor(struct gspca_dev *gspca_dev)
@@ -1985,7 +1981,7 @@
reg_w(dev, 0xa0, 0x0c, 0xb309);
reg_w(dev, 0xa0, ptsensor_info->I2cAdd, 0xb335);
reg_w(dev, 0xa0, ptsensor_info->op, 0xb301);
- read_sensor_register(gspca_dev, ptsensor_info->IdAdd, &value);
+ value = read_sensor_register(gspca_dev, ptsensor_info->IdAdd);
if (value == ptsensor_info->VpId)
return ptsensor_info->sensorId;
@@ -1997,13 +1993,16 @@
return -1;
}
-static __u8 i2c_write(struct gspca_dev *gspca_dev,
+static void i2c_write(struct gspca_dev *gspca_dev,
__u8 reg, const __u8 *val, __u8 size)
{
struct usb_device *dev = gspca_dev->dev;
+ int retry;
+#ifdef GSPCA_DEBUG
if (size > 3 || size < 1)
- return -EINVAL;
+ return;
+#endif
reg_r(gspca_dev, 0xa1, 0xb33f, 1);
reg_w(dev, 0xa0, size, 0xb334);
reg_w(dev, 0xa0, reg, 0xb33a);
@@ -2015,18 +2014,23 @@
reg_w(dev, 0xa0, val[0], 0xb336);
reg_w(dev, 0xa0, val[1], 0xb337);
break;
- case 3:
+ default:
+/* case 3: */
reg_w(dev, 0xa0, val[0], 0xb336);
reg_w(dev, 0xa0, val[1], 0xb337);
reg_w(dev, 0xa0, val[2], 0xb338);
break;
- default:
- reg_w(dev, 0xa0, 0x01, 0xb334);
- return -EINVAL;
}
reg_w(dev, 0xa0, 0x01, 0xb339);
- reg_r(gspca_dev, 0xa1, 0xb33b, 1);
- return gspca_dev->usb_buf[0] == 0;
+ retry = 4;
+ do {
+ reg_r(gspca_dev, 0xa1, 0xb33b, 1);
+ if (gspca_dev->usb_buf[0] == 0)
+ break;
+ msleep(20);
+ } while (--retry > 0);
+ if (retry <= 0)
+ PDEBUG(D_ERR, "i2c_write failed");
}
static void put_tab_to_reg(struct gspca_dev *gspca_dev,
@@ -2051,7 +2055,7 @@
return;
case 0xcc: /* normal write */
reg_w(dev, 0xa0, data[i][2],
- ((data[i][0])<<8) | data[i][1]);
+ (data[i][0]) << 8 | data[i][1]);
break;
case 0xaa: /* i2c op */
i2c_write(gspca_dev, data[i][1], &data[i][2], 1);
@@ -2068,11 +2072,6 @@
/*not reached*/
}
-/*
- "GammaT"=hex:04,17,31,4f,6a,83,99,ad,bf,ce,da,e5,ee,f5,fb,ff,ff
- "MatrixT"=hex:60,f9,e5,e7,50,05,f3,e6,66
- */
-
static void vc0321_reset(struct gspca_dev *gspca_dev)
{
reg_w(gspca_dev->dev, 0xa0, 0x00, 0xb04d);
@@ -2176,7 +2175,7 @@
return 0;
}
-/* this function is called at probe and time */
+/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
@@ -2332,27 +2331,7 @@
put_tab_to_reg(gspca_dev, GammaT, 17, 0xb85b);
put_tab_to_reg(gspca_dev, GammaT, 17, 0xb86c);
put_tab_to_reg(gspca_dev, MatrixT, 9, 0xb82c);
- /* Seem SHARPNESS */
- /*
- reg_w(gspca_dev->dev, 0xa0, 0x80, 0xb80a);
- reg_w(gspca_dev->dev, 0xa0, 0xff, 0xb80b);
- reg_w(gspca_dev->dev, 0xa0, 0xff, 0xb80e);
- */
- /* all 0x40 ??? do nothing
- reg_w(gspca_dev->dev, 0xa0, 0x40, 0xb822);
- reg_w(gspca_dev->dev, 0xa0, 0x40, 0xb823);
- reg_w(gspca_dev->dev, 0xa0, 0x40, 0xb824);
- */
- /* Only works for HV7131R ??
- reg_r (gspca_dev, 0xa1, 0xb881, 1);
- reg_w(gspca_dev->dev, 0xa0, 0xfe01, 0xb881);
- reg_w(gspca_dev->dev, 0xa0, 0x79, 0xb801);
- */
- /* only hv7131r et ov7660
- reg_w(gspca_dev->dev, 0xa0, 0x20, 0xb827);
- reg_w(gspca_dev->dev, 0xa0, 0xff, 0xb826); * ISP_GAIN 80
- reg_w(gspca_dev->dev, 0xa0, 0x23, 0xb800); * ISP CTRL_BAS
- */
+
/* set the led on 0x0892 0x0896 */
if (sd->sensor != SENSOR_PO1200) {
reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
@@ -2502,7 +2481,8 @@
case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
strcpy((char *) menu->name, "50 Hz");
return 0;
- case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ default:
+/* case 2: * V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
strcpy((char *) menu->name, "60 Hz");
return 0;
}
@@ -2565,6 +2545,7 @@
static int __init sd_mod_init(void)
{
int ret;
+
ret = usb_register(&sd_driver);
if (ret < 0)
return ret;