| /*====================================================================== |
| |
| A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards. |
| |
| This driver supports the Adaptec AHA-1460, the New Media Bus |
| Toaster, and the New Media Toast & Jam. |
| |
| aha152x_cs.c 1.54 2000/06/12 21:27:25 |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is David A. Hinds |
| <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU General Public License version 2 (the "GPL"), in which |
| case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| ======================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/ioport.h> |
| #include <scsi/scsi.h> |
| #include <linux/major.h> |
| #include <linux/blkdev.h> |
| #include <scsi/scsi_ioctl.h> |
| |
| #include "scsi.h" |
| #include <scsi/scsi_host.h> |
| #include "aha152x.h" |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| |
| #ifdef PCMCIA_DEBUG |
| static int pc_debug = PCMCIA_DEBUG; |
| module_param(pc_debug, int, 0644); |
| #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) |
| static char *version = |
| "aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)"; |
| #else |
| #define DEBUG(n, args...) |
| #endif |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| /* SCSI bus setup options */ |
| static int host_id = 7; |
| static int reconnect = 1; |
| static int parity = 1; |
| static int synchronous = 1; |
| static int reset_delay = 100; |
| static int ext_trans = 0; |
| |
| module_param(host_id, int, 0); |
| module_param(reconnect, int, 0); |
| module_param(parity, int, 0); |
| module_param(synchronous, int, 0); |
| module_param(reset_delay, int, 0); |
| module_param(ext_trans, int, 0); |
| |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| /*====================================================================*/ |
| |
| typedef struct scsi_info_t { |
| struct pcmcia_device *p_dev; |
| dev_node_t node; |
| struct Scsi_Host *host; |
| } scsi_info_t; |
| |
| static void aha152x_release_cs(struct pcmcia_device *link); |
| static void aha152x_detach(struct pcmcia_device *p_dev); |
| static int aha152x_config_cs(struct pcmcia_device *link); |
| |
| static struct pcmcia_device *dev_list; |
| |
| static int aha152x_probe(struct pcmcia_device *link) |
| { |
| scsi_info_t *info; |
| |
| DEBUG(0, "aha152x_attach()\n"); |
| |
| /* Create new SCSI device */ |
| info = kzalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) return -ENOMEM; |
| info->p_dev = link; |
| link->priv = info; |
| |
| link->io.NumPorts1 = 0x20; |
| link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; |
| link->io.IOAddrLines = 10; |
| link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; |
| link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| link->conf.Attributes = CONF_ENABLE_IRQ; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| link->conf.Present = PRESENT_OPTION; |
| |
| return aha152x_config_cs(link); |
| } /* aha152x_attach */ |
| |
| /*====================================================================*/ |
| |
| static void aha152x_detach(struct pcmcia_device *link) |
| { |
| DEBUG(0, "aha152x_detach(0x%p)\n", link); |
| |
| aha152x_release_cs(link); |
| |
| /* Unlink device structure, free bits */ |
| kfree(link->priv); |
| } /* aha152x_detach */ |
| |
| /*====================================================================*/ |
| |
| #define CS_CHECK(fn, ret) \ |
| do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) |
| |
| static int aha152x_config_check(struct pcmcia_device *p_dev, |
| cistpl_cftable_entry_t *cfg, |
| void *priv_data) |
| { |
| /* For New Media T&J, look for a SCSI window */ |
| if (cfg->io.win[0].len >= 0x20) |
| p_dev->io.BasePort1 = cfg->io.win[0].base; |
| else if ((cfg->io.nwin > 1) && |
| (cfg->io.win[1].len >= 0x20)) |
| p_dev->io.BasePort1 = cfg->io.win[1].base; |
| if ((cfg->io.nwin > 0) && |
| (p_dev->io.BasePort1 < 0xffff)) { |
| if (!pcmcia_request_io(p_dev, &p_dev->io)) |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int aha152x_config_cs(struct pcmcia_device *link) |
| { |
| scsi_info_t *info = link->priv; |
| struct aha152x_setup s; |
| int last_ret, last_fn; |
| struct Scsi_Host *host; |
| |
| DEBUG(0, "aha152x_config(0x%p)\n", link); |
| |
| last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL); |
| if (last_ret) { |
| cs_error(link, RequestIO, last_ret); |
| goto failed; |
| } |
| |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
| CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
| |
| /* Set configuration options for the aha152x driver */ |
| memset(&s, 0, sizeof(s)); |
| s.conf = "PCMCIA setup"; |
| s.io_port = link->io.BasePort1; |
| s.irq = link->irq.AssignedIRQ; |
| s.scsiid = host_id; |
| s.reconnect = reconnect; |
| s.parity = parity; |
| s.synchronous = synchronous; |
| s.delay = reset_delay; |
| if (ext_trans) |
| s.ext_trans = ext_trans; |
| |
| host = aha152x_probe_one(&s); |
| if (host == NULL) { |
| printk(KERN_INFO "aha152x_cs: no SCSI devices found\n"); |
| goto cs_failed; |
| } |
| |
| sprintf(info->node.dev_name, "scsi%d", host->host_no); |
| link->dev_node = &info->node; |
| info->host = host; |
| |
| return 0; |
| |
| cs_failed: |
| cs_error(link, last_fn, last_ret); |
| failed: |
| aha152x_release_cs(link); |
| return -ENODEV; |
| } |
| |
| static void aha152x_release_cs(struct pcmcia_device *link) |
| { |
| scsi_info_t *info = link->priv; |
| |
| aha152x_release(info->host); |
| pcmcia_disable_device(link); |
| } |
| |
| static int aha152x_resume(struct pcmcia_device *link) |
| { |
| scsi_info_t *info = link->priv; |
| |
| aha152x_host_reset_host(info->host); |
| |
| return 0; |
| } |
| |
| static struct pcmcia_device_id aha152x_ids[] = { |
| PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e), |
| PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e), |
| PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20), |
| PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c), |
| PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, aha152x_ids); |
| |
| static struct pcmcia_driver aha152x_cs_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "aha152x_cs", |
| }, |
| .probe = aha152x_probe, |
| .remove = aha152x_detach, |
| .id_table = aha152x_ids, |
| .resume = aha152x_resume, |
| }; |
| |
| static int __init init_aha152x_cs(void) |
| { |
| return pcmcia_register_driver(&aha152x_cs_driver); |
| } |
| |
| static void __exit exit_aha152x_cs(void) |
| { |
| pcmcia_unregister_driver(&aha152x_cs_driver); |
| BUG_ON(dev_list != NULL); |
| } |
| |
| module_init(init_aha152x_cs); |
| module_exit(exit_aha152x_cs); |