| /* |
| * MPC52xx SPI bus driver. |
| * |
| * Copyright (C) 2008 Secret Lab Technologies Ltd. |
| * |
| * This file is released under the GPLv2 |
| * |
| * This is the driver for the MPC5200's dedicated SPI controller. |
| * |
| * Note: this driver does not support the MPC5200 PSC in SPI mode. For |
| * that driver see drivers/spi/mpc52xx_psc_spi.c |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/of_platform.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/spi/spi.h> |
| #include <linux/of_spi.h> |
| #include <linux/io.h> |
| #include <linux/of_gpio.h> |
| #include <asm/time.h> |
| #include <asm/mpc52xx.h> |
| |
| MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); |
| MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* Register offsets */ |
| #define SPI_CTRL1 0x00 |
| #define SPI_CTRL1_SPIE (1 << 7) |
| #define SPI_CTRL1_SPE (1 << 6) |
| #define SPI_CTRL1_MSTR (1 << 4) |
| #define SPI_CTRL1_CPOL (1 << 3) |
| #define SPI_CTRL1_CPHA (1 << 2) |
| #define SPI_CTRL1_SSOE (1 << 1) |
| #define SPI_CTRL1_LSBFE (1 << 0) |
| |
| #define SPI_CTRL2 0x01 |
| #define SPI_BRR 0x04 |
| |
| #define SPI_STATUS 0x05 |
| #define SPI_STATUS_SPIF (1 << 7) |
| #define SPI_STATUS_WCOL (1 << 6) |
| #define SPI_STATUS_MODF (1 << 4) |
| |
| #define SPI_DATA 0x09 |
| #define SPI_PORTDATA 0x0d |
| #define SPI_DATADIR 0x10 |
| |
| /* FSM state return values */ |
| #define FSM_STOP 0 /* Nothing more for the state machine to */ |
| /* do. If something interesting happens */ |
| /* then an IRQ will be received */ |
| #define FSM_POLL 1 /* need to poll for completion, an IRQ is */ |
| /* not expected */ |
| #define FSM_CONTINUE 2 /* Keep iterating the state machine */ |
| |
| /* Driver internal data */ |
| struct mpc52xx_spi { |
| struct spi_master *master; |
| void __iomem *regs; |
| int irq0; /* MODF irq */ |
| int irq1; /* SPIF irq */ |
| unsigned int ipb_freq; |
| |
| /* Statistics; not used now, but will be reintroduced for debugfs */ |
| int msg_count; |
| int wcol_count; |
| int wcol_ticks; |
| u32 wcol_tx_timestamp; |
| int modf_count; |
| int byte_count; |
| |
| struct list_head queue; /* queue of pending messages */ |
| spinlock_t lock; |
| struct work_struct work; |
| |
| /* Details of current transfer (length, and buffer pointers) */ |
| struct spi_message *message; /* current message */ |
| struct spi_transfer *transfer; /* current transfer */ |
| int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); |
| int len; |
| int timestamp; |
| u8 *rx_buf; |
| const u8 *tx_buf; |
| int cs_change; |
| int gpio_cs_count; |
| unsigned int *gpio_cs; |
| }; |
| |
| /* |
| * CS control function |
| */ |
| static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) |
| { |
| int cs; |
| |
| if (ms->gpio_cs_count > 0) { |
| cs = ms->message->spi->chip_select; |
| gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); |
| } else |
| out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); |
| } |
| |
| /* |
| * Start a new transfer. This is called both by the idle state |
| * for the first transfer in a message, and by the wait state when the |
| * previous transfer in a message is complete. |
| */ |
| static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms) |
| { |
| ms->rx_buf = ms->transfer->rx_buf; |
| ms->tx_buf = ms->transfer->tx_buf; |
| ms->len = ms->transfer->len; |
| |
| /* Activate the chip select */ |
| if (ms->cs_change) |
| mpc52xx_spi_chipsel(ms, 1); |
| ms->cs_change = ms->transfer->cs_change; |
| |
| /* Write out the first byte */ |
| ms->wcol_tx_timestamp = get_tbl(); |
| if (ms->tx_buf) |
| out_8(ms->regs + SPI_DATA, *ms->tx_buf++); |
| else |
| out_8(ms->regs + SPI_DATA, 0); |
| } |
| |
| /* Forward declaration of state handlers */ |
| static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, |
| u8 status, u8 data); |
| static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, |
| u8 status, u8 data); |
| |
| /* |
| * IDLE state |
| * |
| * No transfers are in progress; if another transfer is pending then retrieve |
| * it and kick it off. Otherwise, stop processing the state machine |
| */ |
| static int |
| mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) |
| { |
| struct spi_device *spi; |
| int spr, sppr; |
| u8 ctrl1; |
| |
| if (status && (irq != NO_IRQ)) |
| dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", |
| status); |
| |
| /* Check if there is another transfer waiting. */ |
| if (list_empty(&ms->queue)) |
| return FSM_STOP; |
| |
| /* get the head of the queue */ |
| ms->message = list_first_entry(&ms->queue, struct spi_message, queue); |
| list_del_init(&ms->message->queue); |
| |
| /* Setup the controller parameters */ |
| ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; |
| spi = ms->message->spi; |
| if (spi->mode & SPI_CPHA) |
| ctrl1 |= SPI_CTRL1_CPHA; |
| if (spi->mode & SPI_CPOL) |
| ctrl1 |= SPI_CTRL1_CPOL; |
| if (spi->mode & SPI_LSB_FIRST) |
| ctrl1 |= SPI_CTRL1_LSBFE; |
| out_8(ms->regs + SPI_CTRL1, ctrl1); |
| |
| /* Setup the controller speed */ |
| /* minimum divider is '2'. Also, add '1' to force rounding the |
| * divider up. */ |
| sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1; |
| spr = 0; |
| if (sppr < 1) |
| sppr = 1; |
| while (((sppr - 1) & ~0x7) != 0) { |
| sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */ |
| spr++; |
| } |
| sppr--; /* sppr quantity in register is offset by 1 */ |
| if (spr > 7) { |
| /* Don't overrun limits of SPI baudrate register */ |
| spr = 7; |
| sppr = 7; |
| } |
| out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */ |
| |
| ms->cs_change = 1; |
| ms->transfer = container_of(ms->message->transfers.next, |
| struct spi_transfer, transfer_list); |
| |
| mpc52xx_spi_start_transfer(ms); |
| ms->state = mpc52xx_spi_fsmstate_transfer; |
| |
| return FSM_CONTINUE; |
| } |
| |
| /* |
| * TRANSFER state |
| * |
| * In the middle of a transfer. If the SPI core has completed processing |
| * a byte, then read out the received data and write out the next byte |
| * (unless this transfer is finished; in which case go on to the wait |
| * state) |
| */ |
| static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, |
| u8 status, u8 data) |
| { |
| if (!status) |
| return ms->irq0 ? FSM_STOP : FSM_POLL; |
| |
| if (status & SPI_STATUS_WCOL) { |
| /* The SPI controller is stoopid. At slower speeds, it may |
| * raise the SPIF flag before the state machine is actually |
| * finished, which causes a collision (internal to the state |
| * machine only). The manual recommends inserting a delay |
| * between receiving the interrupt and sending the next byte, |
| * but it can also be worked around simply by retrying the |
| * transfer which is what we do here. */ |
| ms->wcol_count++; |
| ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp; |
| ms->wcol_tx_timestamp = get_tbl(); |
| data = 0; |
| if (ms->tx_buf) |
| data = *(ms->tx_buf - 1); |
| out_8(ms->regs + SPI_DATA, data); /* try again */ |
| return FSM_CONTINUE; |
| } else if (status & SPI_STATUS_MODF) { |
| ms->modf_count++; |
| dev_err(&ms->master->dev, "mode fault\n"); |
| mpc52xx_spi_chipsel(ms, 0); |
| ms->message->status = -EIO; |
| ms->message->complete(ms->message->context); |
| ms->state = mpc52xx_spi_fsmstate_idle; |
| return FSM_CONTINUE; |
| } |
| |
| /* Read data out of the spi device */ |
| ms->byte_count++; |
| if (ms->rx_buf) |
| *ms->rx_buf++ = data; |
| |
| /* Is the transfer complete? */ |
| ms->len--; |
| if (ms->len == 0) { |
| ms->timestamp = get_tbl(); |
| ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec; |
| ms->state = mpc52xx_spi_fsmstate_wait; |
| return FSM_CONTINUE; |
| } |
| |
| /* Write out the next byte */ |
| ms->wcol_tx_timestamp = get_tbl(); |
| if (ms->tx_buf) |
| out_8(ms->regs + SPI_DATA, *ms->tx_buf++); |
| else |
| out_8(ms->regs + SPI_DATA, 0); |
| |
| return FSM_CONTINUE; |
| } |
| |
| /* |
| * WAIT state |
| * |
| * A transfer has completed; need to wait for the delay period to complete |
| * before starting the next transfer |
| */ |
| static int |
| mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) |
| { |
| if (status && irq) |
| dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", |
| status); |
| |
| if (((int)get_tbl()) - ms->timestamp < 0) |
| return FSM_POLL; |
| |
| ms->message->actual_length += ms->transfer->len; |
| |
| /* Check if there is another transfer in this message. If there |
| * aren't then deactivate CS, notify sender, and drop back to idle |
| * to start the next message. */ |
| if (ms->transfer->transfer_list.next == &ms->message->transfers) { |
| ms->msg_count++; |
| mpc52xx_spi_chipsel(ms, 0); |
| ms->message->status = 0; |
| ms->message->complete(ms->message->context); |
| ms->state = mpc52xx_spi_fsmstate_idle; |
| return FSM_CONTINUE; |
| } |
| |
| /* There is another transfer; kick it off */ |
| |
| if (ms->cs_change) |
| mpc52xx_spi_chipsel(ms, 0); |
| |
| ms->transfer = container_of(ms->transfer->transfer_list.next, |
| struct spi_transfer, transfer_list); |
| mpc52xx_spi_start_transfer(ms); |
| ms->state = mpc52xx_spi_fsmstate_transfer; |
| return FSM_CONTINUE; |
| } |
| |
| /** |
| * mpc52xx_spi_fsm_process - Finite State Machine iteration function |
| * @irq: irq number that triggered the FSM or 0 for polling |
| * @ms: pointer to mpc52xx_spi driver data |
| */ |
| static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms) |
| { |
| int rc = FSM_CONTINUE; |
| u8 status, data; |
| |
| while (rc == FSM_CONTINUE) { |
| /* Interrupt cleared by read of STATUS followed by |
| * read of DATA registers */ |
| status = in_8(ms->regs + SPI_STATUS); |
| data = in_8(ms->regs + SPI_DATA); |
| rc = ms->state(irq, ms, status, data); |
| } |
| |
| if (rc == FSM_POLL) |
| schedule_work(&ms->work); |
| } |
| |
| /** |
| * mpc52xx_spi_irq - IRQ handler |
| */ |
| static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms) |
| { |
| struct mpc52xx_spi *ms = _ms; |
| spin_lock(&ms->lock); |
| mpc52xx_spi_fsm_process(irq, ms); |
| spin_unlock(&ms->lock); |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * mpc52xx_spi_wq - Workqueue function for polling the state machine |
| */ |
| static void mpc52xx_spi_wq(struct work_struct *work) |
| { |
| struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ms->lock, flags); |
| mpc52xx_spi_fsm_process(0, ms); |
| spin_unlock_irqrestore(&ms->lock, flags); |
| } |
| |
| /* |
| * spi_master ops |
| */ |
| |
| static int mpc52xx_spi_setup(struct spi_device *spi) |
| { |
| if (spi->bits_per_word % 8) |
| return -EINVAL; |
| |
| if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) |
| return -EINVAL; |
| |
| if (spi->chip_select >= spi->master->num_chipselect) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m) |
| { |
| struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master); |
| unsigned long flags; |
| |
| m->actual_length = 0; |
| m->status = -EINPROGRESS; |
| |
| spin_lock_irqsave(&ms->lock, flags); |
| list_add_tail(&m->queue, &ms->queue); |
| spin_unlock_irqrestore(&ms->lock, flags); |
| schedule_work(&ms->work); |
| |
| return 0; |
| } |
| |
| /* |
| * OF Platform Bus Binding |
| */ |
| static int __devinit mpc52xx_spi_probe(struct of_device *op, |
| const struct of_device_id *match) |
| { |
| struct spi_master *master; |
| struct mpc52xx_spi *ms; |
| void __iomem *regs; |
| u8 ctrl1; |
| int rc, i = 0; |
| int gpio_cs; |
| |
| /* MMIO registers */ |
| dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); |
| regs = of_iomap(op->node, 0); |
| if (!regs) |
| return -ENODEV; |
| |
| /* initialize the device */ |
| ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; |
| out_8(regs + SPI_CTRL1, ctrl1); |
| out_8(regs + SPI_CTRL2, 0x0); |
| out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ |
| out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ |
| |
| /* Clear the status register and re-read it to check for a MODF |
| * failure. This driver cannot currently handle multiple masters |
| * on the SPI bus. This fault will also occur if the SPI signals |
| * are not connected to any pins (port_config setting) */ |
| in_8(regs + SPI_STATUS); |
| out_8(regs + SPI_CTRL1, ctrl1); |
| |
| in_8(regs + SPI_DATA); |
| if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { |
| dev_err(&op->dev, "mode fault; is port_config correct?\n"); |
| rc = -EIO; |
| goto err_init; |
| } |
| |
| dev_dbg(&op->dev, "allocating spi_master struct\n"); |
| master = spi_alloc_master(&op->dev, sizeof *ms); |
| if (!master) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| master->bus_num = -1; |
| master->setup = mpc52xx_spi_setup; |
| master->transfer = mpc52xx_spi_transfer; |
| master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; |
| |
| dev_set_drvdata(&op->dev, master); |
| |
| ms = spi_master_get_devdata(master); |
| ms->master = master; |
| ms->regs = regs; |
| ms->irq0 = irq_of_parse_and_map(op->node, 0); |
| ms->irq1 = irq_of_parse_and_map(op->node, 1); |
| ms->state = mpc52xx_spi_fsmstate_idle; |
| ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node); |
| ms->gpio_cs_count = of_gpio_count(op->node); |
| if (ms->gpio_cs_count > 0) { |
| master->num_chipselect = ms->gpio_cs_count; |
| ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), |
| GFP_KERNEL); |
| if (!ms->gpio_cs) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| for (i = 0; i < ms->gpio_cs_count; i++) { |
| gpio_cs = of_get_gpio(op->node, i); |
| if (gpio_cs < 0) { |
| dev_err(&op->dev, |
| "could not parse the gpio field " |
| "in oftree\n"); |
| rc = -ENODEV; |
| goto err_gpio; |
| } |
| |
| rc = gpio_request(gpio_cs, dev_name(&op->dev)); |
| if (rc) { |
| dev_err(&op->dev, |
| "can't request spi cs gpio #%d " |
| "on gpio line %d\n", i, gpio_cs); |
| goto err_gpio; |
| } |
| |
| gpio_direction_output(gpio_cs, 1); |
| ms->gpio_cs[i] = gpio_cs; |
| } |
| } else { |
| master->num_chipselect = 1; |
| } |
| |
| spin_lock_init(&ms->lock); |
| INIT_LIST_HEAD(&ms->queue); |
| INIT_WORK(&ms->work, mpc52xx_spi_wq); |
| |
| /* Decide if interrupts can be used */ |
| if (ms->irq0 && ms->irq1) { |
| rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, |
| "mpc5200-spi-modf", ms); |
| rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, |
| "mpc5200-spi-spif", ms); |
| if (rc) { |
| free_irq(ms->irq0, ms); |
| free_irq(ms->irq1, ms); |
| ms->irq0 = ms->irq1 = 0; |
| } |
| } else { |
| /* operate in polled mode */ |
| ms->irq0 = ms->irq1 = 0; |
| } |
| |
| if (!ms->irq0) |
| dev_info(&op->dev, "using polled mode\n"); |
| |
| dev_dbg(&op->dev, "registering spi_master struct\n"); |
| rc = spi_register_master(master); |
| if (rc) |
| goto err_register; |
| |
| of_register_spi_devices(master, op->node); |
| dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n"); |
| |
| return rc; |
| |
| err_register: |
| dev_err(&ms->master->dev, "initialization failed\n"); |
| spi_master_put(master); |
| err_gpio: |
| while (i-- > 0) |
| gpio_free(ms->gpio_cs[i]); |
| |
| kfree(ms->gpio_cs); |
| err_alloc: |
| err_init: |
| iounmap(regs); |
| return rc; |
| } |
| |
| static int __devexit mpc52xx_spi_remove(struct of_device *op) |
| { |
| struct spi_master *master = dev_get_drvdata(&op->dev); |
| struct mpc52xx_spi *ms = spi_master_get_devdata(master); |
| int i; |
| |
| free_irq(ms->irq0, ms); |
| free_irq(ms->irq1, ms); |
| |
| for (i = 0; i < ms->gpio_cs_count; i++) |
| gpio_free(ms->gpio_cs[i]); |
| |
| kfree(ms->gpio_cs); |
| spi_unregister_master(master); |
| spi_master_put(master); |
| iounmap(ms->regs); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { |
| { .compatible = "fsl,mpc5200-spi", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, mpc52xx_spi_match); |
| |
| static struct of_platform_driver mpc52xx_spi_of_driver = { |
| .owner = THIS_MODULE, |
| .name = "mpc52xx-spi", |
| .match_table = mpc52xx_spi_match, |
| .probe = mpc52xx_spi_probe, |
| .remove = __exit_p(mpc52xx_spi_remove), |
| }; |
| |
| static int __init mpc52xx_spi_init(void) |
| { |
| return of_register_platform_driver(&mpc52xx_spi_of_driver); |
| } |
| module_init(mpc52xx_spi_init); |
| |
| static void __exit mpc52xx_spi_exit(void) |
| { |
| of_unregister_platform_driver(&mpc52xx_spi_of_driver); |
| } |
| module_exit(mpc52xx_spi_exit); |
| |