| /* |
| * Copyright 1993-2003 NVIDIA, Corporation |
| * Copyright 2006 Dave Airlie |
| * Copyright 2007 Maarten Maathuis |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "drmP.h" |
| #include "drm_crtc_helper.h" |
| |
| #include "nouveau_drv.h" |
| #include "nouveau_encoder.h" |
| #include "nouveau_connector.h" |
| #include "nouveau_crtc.h" |
| #include "nouveau_fb.h" |
| #include "nouveau_hw.h" |
| #include "nvreg.h" |
| |
| static int |
| nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb); |
| |
| static void |
| crtc_wr_cio_state(struct drm_crtc *crtc, struct nv04_crtc_reg *crtcstate, int index) |
| { |
| NVWriteVgaCrtc(crtc->dev, nouveau_crtc(crtc)->index, index, |
| crtcstate->CRTC[index]); |
| } |
| |
| static void nv_crtc_set_digital_vibrance(struct drm_crtc *crtc, int level) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; |
| |
| regp->CRTC[NV_CIO_CRE_CSB] = nv_crtc->saturation = level; |
| if (nv_crtc->saturation && nv_gf4_disp_arch(crtc->dev)) { |
| regp->CRTC[NV_CIO_CRE_CSB] = 0x80; |
| regp->CRTC[NV_CIO_CRE_5B] = nv_crtc->saturation << 2; |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_5B); |
| } |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_CSB); |
| } |
| |
| static void nv_crtc_set_image_sharpening(struct drm_crtc *crtc, int level) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; |
| |
| nv_crtc->sharpness = level; |
| if (level < 0) /* blur is in hw range 0x3f -> 0x20 */ |
| level += 0x40; |
| regp->ramdac_634 = level; |
| NVWriteRAMDAC(crtc->dev, nv_crtc->index, NV_PRAMDAC_634, regp->ramdac_634); |
| } |
| |
| #define PLLSEL_VPLL1_MASK \ |
| (NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_VPLL \ |
| | NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO_DB2) |
| #define PLLSEL_VPLL2_MASK \ |
| (NV_PRAMDAC_PLL_COEFF_SELECT_PLL_SOURCE_VPLL2 \ |
| | NV_PRAMDAC_PLL_COEFF_SELECT_VCLK2_RATIO_DB2) |
| #define PLLSEL_TV_MASK \ |
| (NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK1 \ |
| | NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK1 \ |
| | NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK2 \ |
| | NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK2) |
| |
| /* NV4x 0x40.. pll notes: |
| * gpu pll: 0x4000 + 0x4004 |
| * ?gpu? pll: 0x4008 + 0x400c |
| * vpll1: 0x4010 + 0x4014 |
| * vpll2: 0x4018 + 0x401c |
| * mpll: 0x4020 + 0x4024 |
| * mpll: 0x4038 + 0x403c |
| * |
| * the first register of each pair has some unknown details: |
| * bits 0-7: redirected values from elsewhere? (similar to PLL_SETUP_CONTROL?) |
| * bits 20-23: (mpll) something to do with post divider? |
| * bits 28-31: related to single stage mode? (bit 8/12) |
| */ |
| |
| static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mode * mode, int dot_clock) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nv04_mode_state *state = &dev_priv->mode_reg; |
| struct nv04_crtc_reg *regp = &state->crtc_reg[nv_crtc->index]; |
| struct nouveau_pll_vals *pv = ®p->pllvals; |
| struct pll_lims pll_lim; |
| |
| if (get_pll_limits(dev, nv_crtc->index ? VPLL2 : VPLL1, &pll_lim)) |
| return; |
| |
| /* NM2 == 0 is used to determine single stage mode on two stage plls */ |
| pv->NM2 = 0; |
| |
| /* for newer nv4x the blob uses only the first stage of the vpll below a |
| * certain clock. for a certain nv4b this is 150MHz. since the max |
| * output frequency of the first stage for this card is 300MHz, it is |
| * assumed the threshold is given by vco1 maxfreq/2 |
| */ |
| /* for early nv4x, specifically nv40 and *some* nv43 (devids 0 and 6, |
| * not 8, others unknown), the blob always uses both plls. no problem |
| * has yet been observed in allowing the use a single stage pll on all |
| * nv43 however. the behaviour of single stage use is untested on nv40 |
| */ |
| if (dev_priv->chipset > 0x40 && dot_clock <= (pll_lim.vco1.maxfreq / 2)) |
| memset(&pll_lim.vco2, 0, sizeof(pll_lim.vco2)); |
| |
| if (!nouveau_calc_pll_mnp(dev, &pll_lim, dot_clock, pv)) |
| return; |
| |
| state->pllsel &= PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK; |
| |
| /* The blob uses this always, so let's do the same */ |
| if (dev_priv->card_type == NV_40) |
| state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_USE_VPLL2_TRUE; |
| /* again nv40 and some nv43 act more like nv3x as described above */ |
| if (dev_priv->chipset < 0x41) |
| state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_MPLL | |
| NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_NVPLL; |
| state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK; |
| |
| if (pv->NM2) |
| NV_DEBUG_KMS(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", |
| pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P); |
| else |
| NV_DEBUG_KMS(dev, "vpll: n %d m %d log2p %d\n", |
| pv->N1, pv->M1, pv->log2P); |
| |
| nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset); |
| } |
| |
| static void |
| nv_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_connector *connector; |
| unsigned char seq1 = 0, crtc17 = 0; |
| unsigned char crtc1A; |
| |
| NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, |
| nv_crtc->index); |
| |
| if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ |
| return; |
| |
| nv_crtc->last_dpms = mode; |
| |
| if (nv_two_heads(dev)) |
| NVSetOwner(dev, nv_crtc->index); |
| |
| /* nv4ref indicates these two RPC1 bits inhibit h/v sync */ |
| crtc1A = NVReadVgaCrtc(dev, nv_crtc->index, |
| NV_CIO_CRE_RPC1_INDEX) & ~0xC0; |
| switch (mode) { |
| case DRM_MODE_DPMS_STANDBY: |
| /* Screen: Off; HSync: Off, VSync: On -- Not Supported */ |
| seq1 = 0x20; |
| crtc17 = 0x80; |
| crtc1A |= 0x80; |
| break; |
| case DRM_MODE_DPMS_SUSPEND: |
| /* Screen: Off; HSync: On, VSync: Off -- Not Supported */ |
| seq1 = 0x20; |
| crtc17 = 0x80; |
| crtc1A |= 0x40; |
| break; |
| case DRM_MODE_DPMS_OFF: |
| /* Screen: Off; HSync: Off, VSync: Off */ |
| seq1 = 0x20; |
| crtc17 = 0x00; |
| crtc1A |= 0xC0; |
| break; |
| case DRM_MODE_DPMS_ON: |
| default: |
| /* Screen: On; HSync: On, VSync: On */ |
| seq1 = 0x00; |
| crtc17 = 0x80; |
| break; |
| } |
| |
| NVVgaSeqReset(dev, nv_crtc->index, true); |
| /* Each head has it's own sequencer, so we can turn it off when we want */ |
| seq1 |= (NVReadVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX) & ~0x20); |
| NVWriteVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX, seq1); |
| crtc17 |= (NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX) & ~0x80); |
| mdelay(10); |
| NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX, crtc17); |
| NVVgaSeqReset(dev, nv_crtc->index, false); |
| |
| NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A); |
| |
| /* Update connector polling modes */ |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) |
| nouveau_connector_set_polling(connector); |
| } |
| |
| static bool |
| nv_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static void |
| nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; |
| struct drm_framebuffer *fb = crtc->fb; |
| |
| /* Calculate our timings */ |
| int horizDisplay = (mode->crtc_hdisplay >> 3) - 1; |
| int horizStart = (mode->crtc_hsync_start >> 3) + 1; |
| int horizEnd = (mode->crtc_hsync_end >> 3) + 1; |
| int horizTotal = (mode->crtc_htotal >> 3) - 5; |
| int horizBlankStart = (mode->crtc_hdisplay >> 3) - 1; |
| int horizBlankEnd = (mode->crtc_htotal >> 3) - 1; |
| int vertDisplay = mode->crtc_vdisplay - 1; |
| int vertStart = mode->crtc_vsync_start - 1; |
| int vertEnd = mode->crtc_vsync_end - 1; |
| int vertTotal = mode->crtc_vtotal - 2; |
| int vertBlankStart = mode->crtc_vdisplay - 1; |
| int vertBlankEnd = mode->crtc_vtotal - 1; |
| |
| struct drm_encoder *encoder; |
| bool fp_output = false; |
| |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { |
| struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); |
| |
| if (encoder->crtc == crtc && |
| (nv_encoder->dcb->type == OUTPUT_LVDS || |
| nv_encoder->dcb->type == OUTPUT_TMDS)) |
| fp_output = true; |
| } |
| |
| if (fp_output) { |
| vertStart = vertTotal - 3; |
| vertEnd = vertTotal - 2; |
| vertBlankStart = vertStart; |
| horizStart = horizTotal - 5; |
| horizEnd = horizTotal - 2; |
| horizBlankEnd = horizTotal + 4; |
| #if 0 |
| if (dev->overlayAdaptor && dev_priv->card_type >= NV_10) |
| /* This reportedly works around some video overlay bandwidth problems */ |
| horizTotal += 2; |
| #endif |
| } |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vertTotal |= 1; |
| |
| #if 0 |
| ErrorF("horizDisplay: 0x%X \n", horizDisplay); |
| ErrorF("horizStart: 0x%X \n", horizStart); |
| ErrorF("horizEnd: 0x%X \n", horizEnd); |
| ErrorF("horizTotal: 0x%X \n", horizTotal); |
| ErrorF("horizBlankStart: 0x%X \n", horizBlankStart); |
| ErrorF("horizBlankEnd: 0x%X \n", horizBlankEnd); |
| ErrorF("vertDisplay: 0x%X \n", vertDisplay); |
| ErrorF("vertStart: 0x%X \n", vertStart); |
| ErrorF("vertEnd: 0x%X \n", vertEnd); |
| ErrorF("vertTotal: 0x%X \n", vertTotal); |
| ErrorF("vertBlankStart: 0x%X \n", vertBlankStart); |
| ErrorF("vertBlankEnd: 0x%X \n", vertBlankEnd); |
| #endif |
| |
| /* |
| * compute correct Hsync & Vsync polarity |
| */ |
| if ((mode->flags & (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)) |
| && (mode->flags & (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) { |
| |
| regp->MiscOutReg = 0x23; |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| regp->MiscOutReg |= 0x40; |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| regp->MiscOutReg |= 0x80; |
| } else { |
| int vdisplay = mode->vdisplay; |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| vdisplay *= 2; |
| if (mode->vscan > 1) |
| vdisplay *= mode->vscan; |
| if (vdisplay < 400) |
| regp->MiscOutReg = 0xA3; /* +hsync -vsync */ |
| else if (vdisplay < 480) |
| regp->MiscOutReg = 0x63; /* -hsync +vsync */ |
| else if (vdisplay < 768) |
| regp->MiscOutReg = 0xE3; /* -hsync -vsync */ |
| else |
| regp->MiscOutReg = 0x23; /* +hsync +vsync */ |
| } |
| |
| regp->MiscOutReg |= (mode->clock_index & 0x03) << 2; |
| |
| /* |
| * Time Sequencer |
| */ |
| regp->Sequencer[NV_VIO_SR_RESET_INDEX] = 0x00; |
| /* 0x20 disables the sequencer */ |
| if (mode->flags & DRM_MODE_FLAG_CLKDIV2) |
| regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x29; |
| else |
| regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x21; |
| regp->Sequencer[NV_VIO_SR_PLANE_MASK_INDEX] = 0x0F; |
| regp->Sequencer[NV_VIO_SR_CHAR_MAP_INDEX] = 0x00; |
| regp->Sequencer[NV_VIO_SR_MEM_MODE_INDEX] = 0x0E; |
| |
| /* |
| * CRTC |
| */ |
| regp->CRTC[NV_CIO_CR_HDT_INDEX] = horizTotal; |
| regp->CRTC[NV_CIO_CR_HDE_INDEX] = horizDisplay; |
| regp->CRTC[NV_CIO_CR_HBS_INDEX] = horizBlankStart; |
| regp->CRTC[NV_CIO_CR_HBE_INDEX] = (1 << 7) | |
| XLATE(horizBlankEnd, 0, NV_CIO_CR_HBE_4_0); |
| regp->CRTC[NV_CIO_CR_HRS_INDEX] = horizStart; |
| regp->CRTC[NV_CIO_CR_HRE_INDEX] = XLATE(horizBlankEnd, 5, NV_CIO_CR_HRE_HBE_5) | |
| XLATE(horizEnd, 0, NV_CIO_CR_HRE_4_0); |
| regp->CRTC[NV_CIO_CR_VDT_INDEX] = vertTotal; |
| regp->CRTC[NV_CIO_CR_OVL_INDEX] = XLATE(vertStart, 9, NV_CIO_CR_OVL_VRS_9) | |
| XLATE(vertDisplay, 9, NV_CIO_CR_OVL_VDE_9) | |
| XLATE(vertTotal, 9, NV_CIO_CR_OVL_VDT_9) | |
| (1 << 4) | |
| XLATE(vertBlankStart, 8, NV_CIO_CR_OVL_VBS_8) | |
| XLATE(vertStart, 8, NV_CIO_CR_OVL_VRS_8) | |
| XLATE(vertDisplay, 8, NV_CIO_CR_OVL_VDE_8) | |
| XLATE(vertTotal, 8, NV_CIO_CR_OVL_VDT_8); |
| regp->CRTC[NV_CIO_CR_RSAL_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_CELL_HT_INDEX] = ((mode->flags & DRM_MODE_FLAG_DBLSCAN) ? MASK(NV_CIO_CR_CELL_HT_SCANDBL) : 0) | |
| 1 << 6 | |
| XLATE(vertBlankStart, 9, NV_CIO_CR_CELL_HT_VBS_9); |
| regp->CRTC[NV_CIO_CR_CURS_ST_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_CURS_END_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_SA_HI_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_SA_LO_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_TCOFF_HI_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_TCOFF_LO_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_VRS_INDEX] = vertStart; |
| regp->CRTC[NV_CIO_CR_VRE_INDEX] = 1 << 5 | XLATE(vertEnd, 0, NV_CIO_CR_VRE_3_0); |
| regp->CRTC[NV_CIO_CR_VDE_INDEX] = vertDisplay; |
| /* framebuffer can be larger than crtc scanout area. */ |
| regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = fb->pitch / 8; |
| regp->CRTC[NV_CIO_CR_ULINE_INDEX] = 0x00; |
| regp->CRTC[NV_CIO_CR_VBS_INDEX] = vertBlankStart; |
| regp->CRTC[NV_CIO_CR_VBE_INDEX] = vertBlankEnd; |
| regp->CRTC[NV_CIO_CR_MODE_INDEX] = 0x43; |
| regp->CRTC[NV_CIO_CR_LCOMP_INDEX] = 0xff; |
| |
| /* |
| * Some extended CRTC registers (they are not saved with the rest of the vga regs). |
| */ |
| |
| /* framebuffer can be larger than crtc scanout area. */ |
| regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8); |
| regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ? |
| MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00; |
| regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) | |
| XLATE(vertBlankStart, 10, NV_CIO_CRE_LSR_VBS_10) | |
| XLATE(vertStart, 10, NV_CIO_CRE_LSR_VRS_10) | |
| XLATE(vertDisplay, 10, NV_CIO_CRE_LSR_VDE_10) | |
| XLATE(vertTotal, 10, NV_CIO_CRE_LSR_VDT_10); |
| regp->CRTC[NV_CIO_CRE_HEB__INDEX] = XLATE(horizStart, 8, NV_CIO_CRE_HEB_HRS_8) | |
| XLATE(horizBlankStart, 8, NV_CIO_CRE_HEB_HBS_8) | |
| XLATE(horizDisplay, 8, NV_CIO_CRE_HEB_HDE_8) | |
| XLATE(horizTotal, 8, NV_CIO_CRE_HEB_HDT_8); |
| regp->CRTC[NV_CIO_CRE_EBR_INDEX] = XLATE(vertBlankStart, 11, NV_CIO_CRE_EBR_VBS_11) | |
| XLATE(vertStart, 11, NV_CIO_CRE_EBR_VRS_11) | |
| XLATE(vertDisplay, 11, NV_CIO_CRE_EBR_VDE_11) | |
| XLATE(vertTotal, 11, NV_CIO_CRE_EBR_VDT_11); |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| horizTotal = (horizTotal >> 1) & ~1; |
| regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = horizTotal; |
| regp->CRTC[NV_CIO_CRE_HEB__INDEX] |= XLATE(horizTotal, 8, NV_CIO_CRE_HEB_ILC_8); |
| } else |
| regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = 0xff; /* interlace off */ |
| |
| /* |
| * Graphics Display Controller |
| */ |
| regp->Graphics[NV_VIO_GX_SR_INDEX] = 0x00; |
| regp->Graphics[NV_VIO_GX_SREN_INDEX] = 0x00; |
| regp->Graphics[NV_VIO_GX_CCOMP_INDEX] = 0x00; |
| regp->Graphics[NV_VIO_GX_ROP_INDEX] = 0x00; |
| regp->Graphics[NV_VIO_GX_READ_MAP_INDEX] = 0x00; |
| regp->Graphics[NV_VIO_GX_MODE_INDEX] = 0x40; /* 256 color mode */ |
| regp->Graphics[NV_VIO_GX_MISC_INDEX] = 0x05; /* map 64k mem + graphic mode */ |
| regp->Graphics[NV_VIO_GX_DONT_CARE_INDEX] = 0x0F; |
| regp->Graphics[NV_VIO_GX_BIT_MASK_INDEX] = 0xFF; |
| |
| regp->Attribute[0] = 0x00; /* standard colormap translation */ |
| regp->Attribute[1] = 0x01; |
| regp->Attribute[2] = 0x02; |
| regp->Attribute[3] = 0x03; |
| regp->Attribute[4] = 0x04; |
| regp->Attribute[5] = 0x05; |
| regp->Attribute[6] = 0x06; |
| regp->Attribute[7] = 0x07; |
| regp->Attribute[8] = 0x08; |
| regp->Attribute[9] = 0x09; |
| regp->Attribute[10] = 0x0A; |
| regp->Attribute[11] = 0x0B; |
| regp->Attribute[12] = 0x0C; |
| regp->Attribute[13] = 0x0D; |
| regp->Attribute[14] = 0x0E; |
| regp->Attribute[15] = 0x0F; |
| regp->Attribute[NV_CIO_AR_MODE_INDEX] = 0x01; /* Enable graphic mode */ |
| /* Non-vga */ |
| regp->Attribute[NV_CIO_AR_OSCAN_INDEX] = 0x00; |
| regp->Attribute[NV_CIO_AR_PLANE_INDEX] = 0x0F; /* enable all color planes */ |
| regp->Attribute[NV_CIO_AR_HPP_INDEX] = 0x00; |
| regp->Attribute[NV_CIO_AR_CSEL_INDEX] = 0x00; |
| } |
| |
| /** |
| * Sets up registers for the given mode/adjusted_mode pair. |
| * |
| * The clocks, CRTCs and outputs attached to this CRTC must be off. |
| * |
| * This shouldn't enable any clocks, CRTCs, or outputs, but they should |
| * be easily turned on/off after this. |
| */ |
| static void |
| nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; |
| struct nv04_crtc_reg *savep = &dev_priv->saved_reg.crtc_reg[nv_crtc->index]; |
| struct drm_encoder *encoder; |
| bool lvds_output = false, tmds_output = false, tv_output = false, |
| off_chip_digital = false; |
| |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { |
| struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); |
| bool digital = false; |
| |
| if (encoder->crtc != crtc) |
| continue; |
| |
| if (nv_encoder->dcb->type == OUTPUT_LVDS) |
| digital = lvds_output = true; |
| if (nv_encoder->dcb->type == OUTPUT_TV) |
| tv_output = true; |
| if (nv_encoder->dcb->type == OUTPUT_TMDS) |
| digital = tmds_output = true; |
| if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP && digital) |
| off_chip_digital = true; |
| } |
| |
| /* Registers not directly related to the (s)vga mode */ |
| |
| /* What is the meaning of this register? */ |
| /* A few popular values are 0x18, 0x1c, 0x38, 0x3c */ |
| regp->CRTC[NV_CIO_CRE_ENH_INDEX] = savep->CRTC[NV_CIO_CRE_ENH_INDEX] & ~(1<<5); |
| |
| regp->crtc_eng_ctrl = 0; |
| /* Except for rare conditions I2C is enabled on the primary crtc */ |
| if (nv_crtc->index == 0) |
| regp->crtc_eng_ctrl |= NV_CRTC_FSEL_I2C; |
| #if 0 |
| /* Set overlay to desired crtc. */ |
| if (dev->overlayAdaptor) { |
| NVPortPrivPtr pPriv = GET_OVERLAY_PRIVATE(dev); |
| if (pPriv->overlayCRTC == nv_crtc->index) |
| regp->crtc_eng_ctrl |= NV_CRTC_FSEL_OVERLAY; |
| } |
| #endif |
| |
| /* ADDRESS_SPACE_PNVM is the same as setting HCUR_ASI */ |
| regp->cursor_cfg = NV_PCRTC_CURSOR_CONFIG_CUR_LINES_64 | |
| NV_PCRTC_CURSOR_CONFIG_CUR_PIXELS_64 | |
| NV_PCRTC_CURSOR_CONFIG_ADDRESS_SPACE_PNVM; |
| if (dev_priv->chipset >= 0x11) |
| regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_CUR_BPP_32; |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_DOUBLE_SCAN_ENABLE; |
| |
| /* Unblock some timings */ |
| regp->CRTC[NV_CIO_CRE_53] = 0; |
| regp->CRTC[NV_CIO_CRE_54] = 0; |
| |
| /* 0x00 is disabled, 0x11 is lvds, 0x22 crt and 0x88 tmds */ |
| if (lvds_output) |
| regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x11; |
| else if (tmds_output) |
| regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x88; |
| else |
| regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x22; |
| |
| /* These values seem to vary */ |
| /* This register seems to be used by the bios to make certain decisions on some G70 cards? */ |
| regp->CRTC[NV_CIO_CRE_SCRATCH4__INDEX] = savep->CRTC[NV_CIO_CRE_SCRATCH4__INDEX]; |
| |
| nv_crtc_set_digital_vibrance(crtc, nv_crtc->saturation); |
| |
| /* probably a scratch reg, but kept for cargo-cult purposes: |
| * bit0: crtc0?, head A |
| * bit6: lvds, head A |
| * bit7: (only in X), head A |
| */ |
| if (nv_crtc->index == 0) |
| regp->CRTC[NV_CIO_CRE_4B] = savep->CRTC[NV_CIO_CRE_4B] | 0x80; |
| |
| /* The blob seems to take the current value from crtc 0, add 4 to that |
| * and reuse the old value for crtc 1 */ |
| regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] = dev_priv->saved_reg.crtc_reg[0].CRTC[NV_CIO_CRE_TVOUT_LATENCY]; |
| if (!nv_crtc->index) |
| regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] += 4; |
| |
| /* the blob sometimes sets |= 0x10 (which is the same as setting |= |
| * 1 << 30 on 0x60.830), for no apparent reason */ |
| regp->CRTC[NV_CIO_CRE_59] = off_chip_digital; |
| |
| if (dev_priv->card_type >= NV_30) |
| regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1; |
| |
| regp->crtc_830 = mode->crtc_vdisplay - 3; |
| regp->crtc_834 = mode->crtc_vdisplay - 1; |
| |
| if (dev_priv->card_type == NV_40) |
| /* This is what the blob does */ |
| regp->crtc_850 = NVReadCRTC(dev, 0, NV_PCRTC_850); |
| |
| if (dev_priv->card_type >= NV_30) |
| regp->gpio_ext = NVReadCRTC(dev, 0, NV_PCRTC_GPIO_EXT); |
| |
| regp->crtc_cfg = NV_PCRTC_CONFIG_START_ADDRESS_HSYNC; |
| |
| /* Some misc regs */ |
| if (dev_priv->card_type == NV_40) { |
| regp->CRTC[NV_CIO_CRE_85] = 0xFF; |
| regp->CRTC[NV_CIO_CRE_86] = 0x1; |
| } |
| |
| regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] = (crtc->fb->depth + 1) / 8; |
| /* Enable slaved mode (called MODE_TV in nv4ref.h) */ |
| if (lvds_output || tmds_output || tv_output) |
| regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (1 << 7); |
| |
| /* Generic PRAMDAC regs */ |
| |
| if (dev_priv->card_type >= NV_10) |
| /* Only bit that bios and blob set. */ |
| regp->nv10_cursync = (1 << 25); |
| |
| regp->ramdac_gen_ctrl = NV_PRAMDAC_GENERAL_CONTROL_BPC_8BITS | |
| NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE_SEL | |
| NV_PRAMDAC_GENERAL_CONTROL_PIXMIX_ON; |
| if (crtc->fb->depth == 16) |
| regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL; |
| if (dev_priv->chipset >= 0x11) |
| regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_PIPE_LONG; |
| |
| regp->ramdac_630 = 0; /* turn off green mode (tv test pattern?) */ |
| regp->tv_setup = 0; |
| |
| nv_crtc_set_image_sharpening(crtc, nv_crtc->sharpness); |
| |
| /* Some values the blob sets */ |
| regp->ramdac_8c0 = 0x100; |
| regp->ramdac_a20 = 0x0; |
| regp->ramdac_a24 = 0xfffff; |
| regp->ramdac_a34 = 0x1; |
| } |
| |
| /** |
| * Sets up registers for the given mode/adjusted_mode pair. |
| * |
| * The clocks, CRTCs and outputs attached to this CRTC must be off. |
| * |
| * This shouldn't enable any clocks, CRTCs, or outputs, but they should |
| * be easily turned on/off after this. |
| */ |
| static int |
| nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, |
| int x, int y, struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| |
| NV_DEBUG_KMS(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); |
| drm_mode_debug_printmodeline(adjusted_mode); |
| |
| /* unlock must come after turning off FP_TG_CONTROL in output_prepare */ |
| nv_lock_vga_crtc_shadow(dev, nv_crtc->index, -1); |
| |
| nv_crtc_mode_set_vga(crtc, adjusted_mode); |
| /* calculated in nv04_dfp_prepare, nv40 needs it written before calculating PLLs */ |
| if (dev_priv->card_type == NV_40) |
| NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, dev_priv->mode_reg.sel_clk); |
| nv_crtc_mode_set_regs(crtc, adjusted_mode); |
| nv_crtc_calc_state_ext(crtc, mode, adjusted_mode->clock); |
| return 0; |
| } |
| |
| static void nv_crtc_save(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| struct nv04_mode_state *state = &dev_priv->mode_reg; |
| struct nv04_crtc_reg *crtc_state = &state->crtc_reg[nv_crtc->index]; |
| struct nv04_mode_state *saved = &dev_priv->saved_reg; |
| struct nv04_crtc_reg *crtc_saved = &saved->crtc_reg[nv_crtc->index]; |
| |
| if (nv_two_heads(crtc->dev)) |
| NVSetOwner(crtc->dev, nv_crtc->index); |
| |
| nouveau_hw_save_state(crtc->dev, nv_crtc->index, saved); |
| |
| /* init some state to saved value */ |
| state->sel_clk = saved->sel_clk & ~(0x5 << 16); |
| crtc_state->CRTC[NV_CIO_CRE_LCD__INDEX] = crtc_saved->CRTC[NV_CIO_CRE_LCD__INDEX]; |
| state->pllsel = saved->pllsel & ~(PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK); |
| crtc_state->gpio_ext = crtc_saved->gpio_ext; |
| } |
| |
| static void nv_crtc_restore(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| int head = nv_crtc->index; |
| uint8_t saved_cr21 = dev_priv->saved_reg.crtc_reg[head].CRTC[NV_CIO_CRE_21]; |
| |
| if (nv_two_heads(crtc->dev)) |
| NVSetOwner(crtc->dev, head); |
| |
| nouveau_hw_load_state(crtc->dev, head, &dev_priv->saved_reg); |
| nv_lock_vga_crtc_shadow(crtc->dev, head, saved_cr21); |
| |
| nv_crtc->last_dpms = NV_DPMS_CLEARED; |
| } |
| |
| static void nv_crtc_prepare(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_crtc_helper_funcs *funcs = crtc->helper_private; |
| |
| if (nv_two_heads(dev)) |
| NVSetOwner(dev, nv_crtc->index); |
| |
| funcs->dpms(crtc, DRM_MODE_DPMS_OFF); |
| |
| NVBlankScreen(dev, nv_crtc->index, true); |
| |
| /* Some more preperation. */ |
| NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA); |
| if (dev_priv->card_type == NV_40) { |
| uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900); |
| NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900, reg900 & ~0x10000); |
| } |
| } |
| |
| static void nv_crtc_commit(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_crtc_helper_funcs *funcs = crtc->helper_private; |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| nouveau_hw_load_state(dev, nv_crtc->index, &dev_priv->mode_reg); |
| nv04_crtc_mode_set_base(crtc, crtc->x, crtc->y, NULL); |
| |
| #ifdef __BIG_ENDIAN |
| /* turn on LFB swapping */ |
| { |
| uint8_t tmp = NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR); |
| tmp |= MASK(NV_CIO_CRE_RCR_ENDIAN_BIG); |
| NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR, tmp); |
| } |
| #endif |
| |
| funcs->dpms(crtc, DRM_MODE_DPMS_ON); |
| } |
| |
| static void nv_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| NV_DEBUG_KMS(crtc->dev, "\n"); |
| |
| if (!nv_crtc) |
| return; |
| |
| drm_crtc_cleanup(crtc); |
| |
| nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo); |
| kfree(nv_crtc); |
| } |
| |
| static void |
| nv_crtc_gamma_load(struct drm_crtc *crtc) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_device *dev = nv_crtc->base.dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct rgb { uint8_t r, g, b; } __attribute__((packed)) *rgbs; |
| int i; |
| |
| rgbs = (struct rgb *)dev_priv->mode_reg.crtc_reg[nv_crtc->index].DAC; |
| for (i = 0; i < 256; i++) { |
| rgbs[i].r = nv_crtc->lut.r[i] >> 8; |
| rgbs[i].g = nv_crtc->lut.g[i] >> 8; |
| rgbs[i].b = nv_crtc->lut.b[i] >> 8; |
| } |
| |
| nouveau_hw_load_state_palette(dev, nv_crtc->index, &dev_priv->mode_reg); |
| } |
| |
| static void |
| nv_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| int i; |
| |
| if (size != 256) |
| return; |
| |
| for (i = 0; i < 256; i++) { |
| nv_crtc->lut.r[i] = r[i]; |
| nv_crtc->lut.g[i] = g[i]; |
| nv_crtc->lut.b[i] = b[i]; |
| } |
| |
| /* We need to know the depth before we upload, but it's possible to |
| * get called before a framebuffer is bound. If this is the case, |
| * mark the lut values as dirty by setting depth==0, and it'll be |
| * uploaded on the first mode_set_base() |
| */ |
| if (!nv_crtc->base.fb) { |
| nv_crtc->lut.depth = 0; |
| return; |
| } |
| |
| nv_crtc_gamma_load(crtc); |
| } |
| |
| static int |
| nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; |
| struct drm_framebuffer *drm_fb = nv_crtc->base.fb; |
| struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); |
| int arb_burst, arb_lwm; |
| int ret; |
| |
| ret = nouveau_bo_pin(fb->nvbo, TTM_PL_FLAG_VRAM); |
| if (ret) |
| return ret; |
| |
| if (old_fb) { |
| struct nouveau_framebuffer *ofb = nouveau_framebuffer(old_fb); |
| nouveau_bo_unpin(ofb->nvbo); |
| } |
| |
| nv_crtc->fb.offset = fb->nvbo->bo.offset; |
| |
| if (nv_crtc->lut.depth != drm_fb->depth) { |
| nv_crtc->lut.depth = drm_fb->depth; |
| nv_crtc_gamma_load(crtc); |
| } |
| |
| /* Update the framebuffer format. */ |
| regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] &= ~3; |
| regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (crtc->fb->depth + 1) / 8; |
| regp->ramdac_gen_ctrl &= ~NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL; |
| if (crtc->fb->depth == 16) |
| regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL; |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_PIXEL_INDEX); |
| NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_GENERAL_CONTROL, |
| regp->ramdac_gen_ctrl); |
| |
| regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitch >> 3; |
| regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = |
| XLATE(drm_fb->pitch >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8); |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX); |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX); |
| |
| /* Update the framebuffer location. */ |
| regp->fb_start = nv_crtc->fb.offset & ~3; |
| regp->fb_start += (y * drm_fb->pitch) + (x * drm_fb->bits_per_pixel / 8); |
| NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_START, regp->fb_start); |
| |
| /* Update the arbitration parameters. */ |
| nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->bits_per_pixel, |
| &arb_burst, &arb_lwm); |
| |
| regp->CRTC[NV_CIO_CRE_FF_INDEX] = arb_burst; |
| regp->CRTC[NV_CIO_CRE_FFLWM__INDEX] = arb_lwm & 0xff; |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FF_INDEX); |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FFLWM__INDEX); |
| |
| if (dev_priv->card_type >= NV_30) { |
| regp->CRTC[NV_CIO_CRE_47] = arb_lwm >> 8; |
| crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_47); |
| } |
| |
| return 0; |
| } |
| |
| static void nv04_cursor_upload(struct drm_device *dev, struct nouveau_bo *src, |
| struct nouveau_bo *dst) |
| { |
| int width = nv_cursor_width(dev); |
| uint32_t pixel; |
| int i, j; |
| |
| for (i = 0; i < width; i++) { |
| for (j = 0; j < width; j++) { |
| pixel = nouveau_bo_rd32(src, i*64 + j); |
| |
| nouveau_bo_wr16(dst, i*width + j, (pixel & 0x80000000) >> 16 |
| | (pixel & 0xf80000) >> 9 |
| | (pixel & 0xf800) >> 6 |
| | (pixel & 0xf8) >> 3); |
| } |
| } |
| } |
| |
| static void nv11_cursor_upload(struct drm_device *dev, struct nouveau_bo *src, |
| struct nouveau_bo *dst) |
| { |
| uint32_t pixel; |
| int alpha, i; |
| |
| /* nv11+ supports premultiplied (PM), or non-premultiplied (NPM) alpha |
| * cursors (though NPM in combination with fp dithering may not work on |
| * nv11, from "nv" driver history) |
| * NPM mode needs NV_PCRTC_CURSOR_CONFIG_ALPHA_BLEND set and is what the |
| * blob uses, however we get given PM cursors so we use PM mode |
| */ |
| for (i = 0; i < 64 * 64; i++) { |
| pixel = nouveau_bo_rd32(src, i); |
| |
| /* hw gets unhappy if alpha <= rgb values. for a PM image "less |
| * than" shouldn't happen; fix "equal to" case by adding one to |
| * alpha channel (slightly inaccurate, but so is attempting to |
| * get back to NPM images, due to limits of integer precision) |
| */ |
| alpha = pixel >> 24; |
| if (alpha > 0 && alpha < 255) |
| pixel = (pixel & 0x00ffffff) | ((alpha + 1) << 24); |
| |
| #ifdef __BIG_ENDIAN |
| { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| |
| if (dev_priv->chipset == 0x11) { |
| pixel = ((pixel & 0x000000ff) << 24) | |
| ((pixel & 0x0000ff00) << 8) | |
| ((pixel & 0x00ff0000) >> 8) | |
| ((pixel & 0xff000000) >> 24); |
| } |
| } |
| #endif |
| |
| nouveau_bo_wr32(dst, i, pixel); |
| } |
| } |
| |
| static int |
| nv04_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, |
| uint32_t buffer_handle, uint32_t width, uint32_t height) |
| { |
| struct drm_nouveau_private *dev_priv = crtc->dev->dev_private; |
| struct drm_device *dev = dev_priv->dev; |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| struct nouveau_bo *cursor = NULL; |
| struct drm_gem_object *gem; |
| int ret = 0; |
| |
| if (width != 64 || height != 64) |
| return -EINVAL; |
| |
| if (!buffer_handle) { |
| nv_crtc->cursor.hide(nv_crtc, true); |
| return 0; |
| } |
| |
| gem = drm_gem_object_lookup(dev, file_priv, buffer_handle); |
| if (!gem) |
| return -EINVAL; |
| cursor = nouveau_gem_object(gem); |
| |
| ret = nouveau_bo_map(cursor); |
| if (ret) |
| goto out; |
| |
| if (dev_priv->chipset >= 0x11) |
| nv11_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo); |
| else |
| nv04_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo); |
| |
| nouveau_bo_unmap(cursor); |
| nv_crtc->cursor.offset = nv_crtc->cursor.nvbo->bo.offset; |
| nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset); |
| nv_crtc->cursor.show(nv_crtc, true); |
| out: |
| drm_gem_object_unreference_unlocked(gem); |
| return ret; |
| } |
| |
| static int |
| nv04_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) |
| { |
| struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); |
| |
| nv_crtc->cursor.set_pos(nv_crtc, x, y); |
| return 0; |
| } |
| |
| static const struct drm_crtc_funcs nv04_crtc_funcs = { |
| .save = nv_crtc_save, |
| .restore = nv_crtc_restore, |
| .cursor_set = nv04_crtc_cursor_set, |
| .cursor_move = nv04_crtc_cursor_move, |
| .gamma_set = nv_crtc_gamma_set, |
| .set_config = drm_crtc_helper_set_config, |
| .destroy = nv_crtc_destroy, |
| }; |
| |
| static const struct drm_crtc_helper_funcs nv04_crtc_helper_funcs = { |
| .dpms = nv_crtc_dpms, |
| .prepare = nv_crtc_prepare, |
| .commit = nv_crtc_commit, |
| .mode_fixup = nv_crtc_mode_fixup, |
| .mode_set = nv_crtc_mode_set, |
| .mode_set_base = nv04_crtc_mode_set_base, |
| .load_lut = nv_crtc_gamma_load, |
| }; |
| |
| int |
| nv04_crtc_create(struct drm_device *dev, int crtc_num) |
| { |
| struct nouveau_crtc *nv_crtc; |
| int ret, i; |
| |
| nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL); |
| if (!nv_crtc) |
| return -ENOMEM; |
| |
| for (i = 0; i < 256; i++) { |
| nv_crtc->lut.r[i] = i << 8; |
| nv_crtc->lut.g[i] = i << 8; |
| nv_crtc->lut.b[i] = i << 8; |
| } |
| nv_crtc->lut.depth = 0; |
| |
| nv_crtc->index = crtc_num; |
| nv_crtc->last_dpms = NV_DPMS_CLEARED; |
| |
| drm_crtc_init(dev, &nv_crtc->base, &nv04_crtc_funcs); |
| drm_crtc_helper_add(&nv_crtc->base, &nv04_crtc_helper_funcs); |
| drm_mode_crtc_set_gamma_size(&nv_crtc->base, 256); |
| |
| ret = nouveau_bo_new(dev, NULL, 64*64*4, 0x100, TTM_PL_FLAG_VRAM, |
| 0, 0x0000, false, true, &nv_crtc->cursor.nvbo); |
| if (!ret) { |
| ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM); |
| if (!ret) |
| ret = nouveau_bo_map(nv_crtc->cursor.nvbo); |
| if (ret) |
| nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo); |
| } |
| |
| nv04_cursor_init(nv_crtc); |
| |
| return 0; |
| } |
| |