Merge /spare/repo/linux-2.6/
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
new file mode 100644
index 0000000..b93b68e
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -0,0 +1,93 @@
+ S3C24XX USB Host support
+ ========================
+
+
+
+Introduction
+------------
+
+ This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+ Enable at least the following kernel options:
+
+ menuconfig:
+
+ Device Drivers --->
+ USB support --->
+ <*> Support for Host-side USB
+ <*> OHCI HCD support
+
+
+ .config:
+ CONFIG_USB
+ CONFIG_USB_OHCI_HCD
+
+
+ Once these options are configured, the standard set of USB device
+ drivers can be configured and used.
+
+
+Board Support
+-------------
+
+ The driver attaches to a platform device, which will need to be
+ added by the board specific support file in linux/arch/arm/mach-s3c2410,
+ such as mach-bast.c or mach-smdk2410.c
+
+ The platform device's platform_data field is only needed if the
+ board implements extra power control or over-current monitoring.
+
+ The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+ register, so if both ports are to be used for the host, then it is
+ the board support file's responsibility to ensure that the second
+ port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+ See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+ descriptions of the platform device data. An implementation
+ can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+ The `struct s3c2410_hcd_info` contains a pair of functions
+ that get called to enable over-current detection, and to
+ control the port power status.
+
+ The ports are numbered 0 and 1.
+
+ power_control:
+
+ Called to enable or disable the power on the port.
+
+ enable_oc:
+
+ Called to enable or disable the over-current monitoring.
+ This should claim or release the resources being used to
+ check the power condition on the port, such as an IRQ.
+
+ report_oc:
+
+ The OHCI driver fills this field in for the over-current code
+ to call when there is a change to the over-current state on
+ an port. The ports argument is a bitmask of 1 bit per port,
+ with bit X being 1 for an over-current on port X.
+
+ The function s3c2410_usb_report_oc() has been provided to
+ ensure this is called correctly.
+
+ port[x]:
+
+ This is struct describes each port, 0 or 1. The platform driver
+ should set the flags field of each port to S3C_HCDFLG_USED if
+ the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 39a6c1b..7152bfb 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -533,6 +533,13 @@
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
ldr r6, [r2, #TI_CPU_DOMAIN]!
+#if __LINUX_ARM_ARCH__ >= 6
+#ifdef CONFIG_CPU_MPCORE
+ clrex
+#else
+ strex r3, r4, [ip] @ Clear exclusive monitor
+#endif
+#endif
#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
mra r4, r5, acc0
stmia ip, {r4, r5}
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 2036ff1..64a988c 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,4 +1,6 @@
-#if __LINUX_ARM_ARCH__ >= 6
+#include <linux/config.h>
+
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
.macro bitop, instr
mov r2, #1
and r3, r0, #7 @ Get bit offset
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 7f2b613..f021fd8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/usb-simtec.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -14,6 +14,8 @@
* Modifications:
* 14-Sep-2004 BJD Created
* 18-Oct-2004 BJD Cleanups, and added code to report OC cleared
+ * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc
+ * 09-Aug-2005 BJD Ports powered only if both are enabled
*/
#define DEBUG
@@ -47,13 +49,19 @@
* designed boards.
*/
+static unsigned int power_state[2];
+
static void
usb_simtec_powercontrol(int port, int to)
{
pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
- if (port == 1)
- s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
+ power_state[port] = to;
+
+ if (power_state[0] && power_state[1])
+ s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+ else
+ s3c2410_gpio_setpin(S3C2410_GPB4, 1);
}
static irqreturn_t
@@ -63,10 +71,10 @@
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
- s3c2410_report_oc(info, 3);
+ s3c2410_usb_report_oc(info, 3);
} else {
pr_debug("usb_simtec: over-current irq (oc cleared)\n");
- s3c2410_report_oc(info, 0);
+ s3c2410_usb_report_oc(info, 0);
}
return IRQ_HANDLED;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index e33fe42..3c655c5 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -383,6 +383,7 @@
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
+ unsigned int user_pgprot;
int cpu_arch = cpu_architecture();
int i;
@@ -408,6 +409,9 @@
}
}
+ cp = &cache_policies[cachepolicy];
+ user_pgprot = cp->pte;
+
/*
* ARMv6 and above have extended page tables.
*/
@@ -426,11 +430,18 @@
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ /*
+ * Mark the device area as "shared device"
+ */
mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
- }
- cp = &cache_policies[cachepolicy];
+ /*
+ * User pages need to be mapped with the ASID
+ * (iow, non-global)
+ */
+ user_pgprot |= L_PTE_ASID;
+ }
if (cpu_arch >= CPU_ARCH_ARMv5) {
mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@@ -448,7 +459,7 @@
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
- v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+ v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
protection_map[i] = __pgprot(v);
}
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 352db98..3429ddc 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -111,12 +111,6 @@
mcr p15, 0, r1, c13, c0, 1 @ set context ID
mov pc, lr
-#define nG (1 << 11)
-#define APX (1 << 9)
-#define AP1 (1 << 5)
-#define AP0 (1 << 4)
-#define XN (1 << 0)
-
/*
* cpu_v6_set_pte(ptep, pte)
*
@@ -139,24 +133,24 @@
ENTRY(cpu_v6_set_pte)
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0x00000ff0
+ bic r2, r1, #0x000007f0
bic r2, r2, #0x00000003
- orr r2, r2, #AP0 | 2
+ orr r2, r2, #PTE_EXT_AP0 | 2
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
- orreq r2, r2, #APX
+ orreq r2, r2, #PTE_EXT_APX
tst r1, #L_PTE_USER
- orrne r2, r2, #AP1 | nG
- tstne r2, #APX
- bicne r2, r2, #APX | AP0
+ orrne r2, r2, #PTE_EXT_AP1
+ tstne r2, #PTE_EXT_APX
+ bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
tst r1, #L_PTE_YOUNG
- biceq r2, r2, #APX | AP1 | AP0
+ biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
@ tst r1, #L_PTE_EXEC
-@ orreq r2, r2, #XN
+@ orreq r2, r2, #PTE_EXT_XN
tst r1, #L_PTE_PRESENT
moveq r2, #0
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index e248a79..dbbe6c79 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -1803,7 +1803,7 @@
if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
== PROM_ERROR)
return;
- if (u3_rev != 0x35)
+ if (u3_rev != 0x35 && u3_rev != 0x37)
return;
/* does it need fixup ? */
if (prom_getproplen(i2c, "interrupts") > 0)
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index 1ab5f2d..70f0518 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -275,9 +275,9 @@
static void __exit ns558_exit(void)
{
- struct ns558 *ns558;
+ struct ns558 *ns558, *safe;
- list_for_each_entry(ns558, &ns558_list, node) {
+ list_for_each_entry_safe(ns558, safe, &ns558_list, node) {
gameport_unregister_port(ns558->gameport);
release_region(ns558->io & ~(ns558->size - 1), ns558->size);
kfree(ns558);
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 8b487ed..974f2f3 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -42,7 +42,7 @@
#include "wbsd.h"
#define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.2"
+#define DRIVER_VERSION "1.3"
#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) \
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e44f8e9..f9e3be9 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -130,12 +130,11 @@
#define AX25_6PACK_HEADER_LEN 0
-static void sp_start_tx_timer(struct sixpack *);
static void sixpack_decode(struct sixpack *, unsigned char[], int);
static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
/*
- * perform the persistence/slottime algorithm for CSMA access. If the
+ * Perform the persistence/slottime algorithm for CSMA access. If the
* persistence check was successful, write the data to the serial driver.
* Note that in case of DAMA operation, the data is not sent here.
*/
@@ -143,7 +142,7 @@
static void sp_xmit_on_air(unsigned long channel)
{
struct sixpack *sp = (struct sixpack *) channel;
- int actual;
+ int actual, when = sp->slottime;
static unsigned char random;
random = random * 17 + 41;
@@ -159,20 +158,10 @@
sp->tty->driver->write(sp->tty, &sp->led_state, 1);
sp->status2 = 0;
} else
- sp_start_tx_timer(sp);
+ mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
}
/* ----> 6pack timer interrupt handler and friends. <---- */
-static void sp_start_tx_timer(struct sixpack *sp)
-{
- int when = sp->slottime;
-
- del_timer(&sp->tx_t);
- sp->tx_t.data = (unsigned long) sp;
- sp->tx_t.function = sp_xmit_on_air;
- sp->tx_t.expires = jiffies + ((when + 1) * HZ) / 100;
- add_timer(&sp->tx_t);
-}
/* Encapsulate one AX.25 frame and stuff into a TTY queue. */
static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
@@ -243,8 +232,7 @@
sp->xleft = count;
sp->xhead = sp->xbuff;
sp->status2 = count;
- if (sp->duplex == 0)
- sp_start_tx_timer(sp);
+ sp_xmit_on_air((unsigned long)sp);
}
return;
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index e237052..7235f94 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -907,9 +907,13 @@
raptorFlag = TRUE;
}
-
+ if (pci_request_regions(pDev, "dpt_i2o")) {
+ PERROR("dpti: adpt_config_hba: pci request region failed\n");
+ return -EINVAL;
+ }
base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
if (!base_addr_virt) {
+ pci_release_regions(pDev);
PERROR("dpti: adpt_config_hba: io remap failed\n");
return -EINVAL;
}
@@ -919,6 +923,7 @@
if (!msg_addr_virt) {
PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n");
iounmap(base_addr_virt);
+ pci_release_regions(pDev);
return -EINVAL;
}
} else {
@@ -932,6 +937,7 @@
iounmap(msg_addr_virt);
}
iounmap(base_addr_virt);
+ pci_release_regions(pDev);
return -ENOMEM;
}
memset(pHba, 0, sizeof(adpt_hba));
@@ -1027,6 +1033,7 @@
up(&adpt_configuration_lock);
iounmap(pHba->base_addr_virt);
+ pci_release_regions(pHba->pDev);
if(pHba->msg_addr_virt != pHba->base_addr_virt){
iounmap(pHba->msg_addr_virt);
}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 794fb55..6a75ec2 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -385,6 +385,7 @@
* appropriate place
*/
host->host_failed--;
+ INIT_LIST_HEAD(&host->eh_cmd_q);
DPRINTK("EXIT\n");
return 0;
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 8e59868..76644ea 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -468,7 +468,7 @@
for (i = 0; i < last; i++) {
buf[idx++] = cpu_to_le32(sg_dma_address(&sg[i]));
buf[idx++] = cpu_to_le32(sg_dma_len(&sg[i]));
- total_len += sg[i].length;
+ total_len += sg_dma_len(&sg[i]);
}
buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT);
sgt_len = idx * 4;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 2d3c4ac..48edd67 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -336,9 +336,23 @@
unsigned long flags;
const int size = sizeof(struct scsi_target)
+ shost->transportt->target_size;
- struct scsi_target *starget = kmalloc(size, GFP_ATOMIC);
+ struct scsi_target *starget;
struct scsi_target *found_target;
+ /*
+ * Obtain the real parent from the transport. The transport
+ * is allowed to fail (no error) if there is nothing at that
+ * target id.
+ */
+ if (shost->transportt->target_parent) {
+ spin_lock_irqsave(shost->host_lock, flags);
+ parent = shost->transportt->target_parent(shost, channel, id);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ if (!parent)
+ return NULL;
+ }
+
+ starget = kmalloc(size, GFP_KERNEL);
if (!starget) {
printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
return NULL;
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 35d1c1e..e6412fc 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1022,6 +1022,23 @@
return &i->rport_attr_cont.ac == cont;
}
+
+/*
+ * Must be called with shost->host_lock held
+ */
+static struct device *fc_target_parent(struct Scsi_Host *shost,
+ int channel, uint id)
+{
+ struct fc_rport *rport;
+
+ list_for_each_entry(rport, &fc_host_rports(shost), peers)
+ if ((rport->channel == channel) &&
+ (rport->scsi_target_id == id))
+ return &rport->dev;
+
+ return NULL;
+}
+
struct scsi_transport_template *
fc_attach_transport(struct fc_function_template *ft)
{
@@ -1057,6 +1074,8 @@
/* Transport uses the shost workq for scsi scanning */
i->t.create_work_queue = 1;
+
+ i->t.target_parent = fc_target_parent;
/*
* Setup SCSI Target Attributes.
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 16e37a5..3011281 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -717,6 +717,9 @@
DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
+ /* enable LCD controller clock */
+ pxa_set_cken(CKEN16_LCD, 1);
+
/* Sequence from 11.7.10 */
LCCR3 = fbi->reg_lccr3;
LCCR2 = fbi->reg_lccr2;
@@ -750,6 +753,9 @@
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+ /* disable LCD controller clock */
+ pxa_set_cken(CKEN16_LCD, 0);
}
/*
@@ -1299,8 +1305,6 @@
ret = -ENOMEM;
goto failed;
}
- /* enable LCD controller clock */
- pxa_set_cken(CKEN16_LCD, 1);
ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
if (ret) {
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
index 1cc85a0..bd43b56 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -12,6 +12,7 @@
* Changelog:
* 11-Sep-2004 BJD Created file
* 21-Sep-2004 BJD Updated port info
+ * 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc
*/
#ifndef __ASM_ARCH_USBCONTROL_H
@@ -35,7 +36,7 @@
void (*report_oc)(struct s3c2410_hcd_info *, int ports);
};
-static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
{
if (info->report_oc != NULL) {
(info->report_oc)(info, ports);
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index a9892eb..478c49b 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -188,12 +188,18 @@
/*
* - extended small page/tiny page
*/
+#define PTE_EXT_XN (1 << 0) /* v6 */
#define PTE_EXT_AP_MASK (3 << 4)
+#define PTE_EXT_AP0 (1 << 4)
+#define PTE_EXT_AP1 (2 << 4)
#define PTE_EXT_AP_UNO_SRO (0 << 4)
-#define PTE_EXT_AP_UNO_SRW (1 << 4)
-#define PTE_EXT_AP_URO_SRW (2 << 4)
-#define PTE_EXT_AP_URW_SRW (3 << 4)
+#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0)
#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */
+#define PTE_EXT_APX (1 << 9) /* v6 */
+#define PTE_EXT_SHARED (1 << 10) /* v6 */
+#define PTE_EXT_NG (1 << 11) /* v6 */
/*
* - small page
@@ -224,6 +230,8 @@
#define L_PTE_WRITE (1 << 5)
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
+#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */
+#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */
#ifndef __ASSEMBLY__
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
index a4f1837..f6e0bb4 100644
--- a/include/scsi/scsi_transport.h
+++ b/include/scsi/scsi_transport.h
@@ -29,6 +29,14 @@
struct transport_container target_attrs;
struct transport_container device_attrs;
+ /*
+ * If set, call target_parent prior to allocating a scsi_target,
+ * so we get the appropriate parent for the target. This function
+ * is required for transports like FC and iSCSI that do not put the
+ * scsi_target under scsi_host.
+ */
+ struct device *(*target_parent)(struct Scsi_Host *, int, uint);
+
/* The size of the specific transport attribute structure (a
* space of this size will be left at the end of the
* scsi_* structure */
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 259cf55..c7e36d4 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -308,8 +308,6 @@
struct workqueue_struct *wq;
struct task_struct *p;
- BUG_ON(strlen(name) > 10);
-
wq = kmalloc(sizeof(*wq), GFP_KERNEL);
if (!wq)
return NULL;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 96a0280..acdd18e 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1876,15 +1876,6 @@
return mss_now;
}
-static int dn_error(struct sock *sk, int flags, int err)
-{
- if (err == -EPIPE)
- err = sock_error(sk) ? : -EPIPE;
- if (err == -EPIPE && !(flags & MSG_NOSIGNAL))
- send_sig(SIGPIPE, current, 0);
- return err;
-}
-
static int dn_sendmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size)
{
@@ -2045,7 +2036,7 @@
return sent ? sent : err;
out_err:
- err = dn_error(sk, flags, err);
+ err = sk_stream_error(sk, flags, err);
release_sock(sk);
return err;
}