Revert "ACPICA: revert "acpi_serialize" changes"
This reverts commit a8f4af6dc6600980885c594f52eecd60edd62013.
Thus restoring ACPICA's new acpi_serialize code.
This commit by itself may cause a regression, but
it is reverted in this order so that subsequent
reverts reverts under this one can be made
without conflict.
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index cae786c..3a799b9 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -196,15 +196,11 @@
notify_info->notify.value = (u16) notify_value;
notify_info->notify.handler_obj = handler_obj;
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
acpi_ev_notify_dispatch(notify_info);
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
+ acpi_ex_reacquire_interpreter();
}
if (!handler_obj) {
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index 96b0e84..e99f0c4 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -291,7 +291,6 @@
u32 bit_width, acpi_integer * value)
{
acpi_status status;
- acpi_status status2;
acpi_adr_space_handler handler;
acpi_adr_space_setup region_setup;
union acpi_operand_object *handler_desc;
@@ -345,7 +344,7 @@
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
@@ -353,10 +352,7 @@
/* Re-enter the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
/* Check for failure of the Region Setup */
@@ -409,7 +405,7 @@
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
}
/* Call the handler */
@@ -430,10 +426,7 @@
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index a3379ba..685a103 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -768,11 +768,9 @@
return (AE_BAD_PARAMETER);
}
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ /* Must lock interpreter to prevent race conditions */
+ acpi_ex_enter_interpreter();
status = acpi_ev_acquire_global_lock(timeout);
acpi_ex_exit_interpreter();
diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c
index ae97812..7c38528 100644
--- a/drivers/acpi/executer/excreate.c
+++ b/drivers/acpi/executer/excreate.c
@@ -583,10 +583,7 @@
* Get the sync_level. If method is serialized, a mutex will be
* created for this method when it is parsed.
*/
- if (acpi_gbl_all_methods_serialized) {
- obj_desc->method.sync_level = 0;
- obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
- } else if (method_flags & AML_METHOD_SERIALIZED) {
+ if (method_flags & AML_METHOD_SERIALIZED) {
/*
* ACPI 1.0: sync_level = 0
* ACPI 2.0: sync_level = sync_level in method declaration
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
index b2edf62..9460baf 100644
--- a/drivers/acpi/executer/exsystem.c
+++ b/drivers/acpi/executer/exsystem.c
@@ -66,7 +66,6 @@
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
@@ -79,7 +78,7 @@
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_wait_semaphore(semaphore, 1, timeout);
@@ -89,13 +88,7 @@
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
@@ -119,7 +112,6 @@
acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
@@ -132,7 +124,7 @@
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_acquire_mutex(mutex, timeout);
@@ -142,13 +134,7 @@
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
@@ -209,20 +195,18 @@
acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
{
- acpi_status status;
-
ACPI_FUNCTION_ENTRY();
/* Since this thread will sleep, we must release the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
acpi_os_sleep(how_long);
/* And now we must get the interpreter again */
- status = acpi_ex_enter_interpreter();
- return (status);
+ acpi_ex_reacquire_interpreter();
+ return (AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
index aea461f..6b0aecc 100644
--- a/drivers/acpi/executer/exutils.c
+++ b/drivers/acpi/executer/exutils.c
@@ -76,14 +76,15 @@
*
* PARAMETERS: None
*
- * RETURN: Status
+ * RETURN: None
*
- * DESCRIPTION: Enter the interpreter execution region. Failure to enter
- * the interpreter region is a fatal system error
+ * DESCRIPTION: Enter the interpreter execution region. Failure to enter
+ * the interpreter region is a fatal system error. Used in
+ * conjunction with exit_interpreter.
*
******************************************************************************/
-acpi_status acpi_ex_enter_interpreter(void)
+void acpi_ex_enter_interpreter(void)
{
acpi_status status;
@@ -91,10 +92,42 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not acquire AML Interpreter mutex"));
}
- return_ACPI_STATUS(status);
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_reacquire_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Reacquire the interpreter execution region from within the
+ * interpreter code. Failure to enter the interpreter region is a
+ * fatal system error. Used in conjuction with
+ * relinquish_interpreter
+ *
+ ******************************************************************************/
+
+void acpi_ex_reacquire_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter,
+ * since it was not actually released by acpi_ex_relinquish_interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_enter_interpreter();
+ }
+
+ return_VOID;
}
/*******************************************************************************
@@ -105,17 +138,9 @@
*
* RETURN: None
*
- * DESCRIPTION: Exit the interpreter execution region
- *
- * Cases where the interpreter is unlocked:
- * 1) Completion of the execution of a control method
- * 2) Method blocked on a Sleep() AML opcode
- * 3) Method blocked on an Acquire() AML opcode
- * 4) Method blocked on a Wait() AML opcode
- * 5) Method blocked to acquire the global lock
- * 6) Method blocked to execute a serialized control method that is
- * already executing
- * 7) About to invoke a user-installed opregion handler
+ * DESCRIPTION: Exit the interpreter execution region. This is the top level
+ * routine used to exit the interpreter when all processing has
+ * been completed.
*
******************************************************************************/
@@ -127,7 +152,46 @@
status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not release AML Interpreter mutex"));
+ }
+
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_relinquish_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Exit the interpreter execution region, from within the
+ * interpreter - before attempting an operation that will possibly
+ * block the running thread.
+ *
+ * Cases where the interpreter is unlocked internally
+ * 1) Method to be blocked on a Sleep() AML opcode
+ * 2) Method to be blocked on an Acquire() AML opcode
+ * 3) Method to be blocked on a Wait() AML opcode
+ * 4) Method to be blocked to acquire the global lock
+ * 5) Method to be blocked waiting to execute a serialized control method
+ * that is currently executing
+ * 6) About to invoke a user-installed opregion handler
+ *
+ ******************************************************************************/
+
+void acpi_ex_relinquish_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_exit_interpreter();
}
return_VOID;
@@ -141,8 +205,8 @@
*
* RETURN: none
*
- * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
- * belongs to a 32-bit ACPI table.
+ * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
+ * 32-bit, as determined by the revision of the DSDT.
*
******************************************************************************/
diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c
index 26fd0dd..aa6370c 100644
--- a/drivers/acpi/namespace/nseval.c
+++ b/drivers/acpi/namespace/nseval.c
@@ -154,11 +154,7 @@
* Execute the method via the interpreter. The interpreter is locked
* here before calling into the AML parser
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
+ acpi_ex_enter_interpreter();
status = acpi_ps_execute_method(info);
acpi_ex_exit_interpreter();
} else {
@@ -182,10 +178,7 @@
* resolution, we must lock it because we could access an opregion.
* The opregion access code assumes that the interpreter is locked.
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ acpi_ex_enter_interpreter();
/* Function has a strange interface */
diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c
index c4ab615..33db224 100644
--- a/drivers/acpi/namespace/nsinit.c
+++ b/drivers/acpi/namespace/nsinit.c
@@ -214,7 +214,7 @@
u32 level, void *context, void **return_value)
{
acpi_object_type type;
- acpi_status status;
+ acpi_status status = AE_OK;
struct acpi_init_walk_info *info =
(struct acpi_init_walk_info *)context;
struct acpi_namespace_node *node =
@@ -268,10 +268,7 @@
/*
* Must lock the interpreter before executing AML code
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ acpi_ex_enter_interpreter();
/*
* Each of these types can contain executable AML code within the
diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c
index 8904d0f..7ac6ace 100644
--- a/drivers/acpi/namespace/nsxfeval.c
+++ b/drivers/acpi/namespace/nsxfeval.c
@@ -170,7 +170,6 @@
struct acpi_buffer *return_buffer)
{
acpi_status status;
- acpi_status status2;
struct acpi_evaluate_info *info;
acpi_size buffer_space_needed;
u32 i;
@@ -329,14 +328,12 @@
* Delete the internal return object. NOTE: Interpreter must be
* locked to avoid race condition.
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_SUCCESS(status2)) {
+ acpi_ex_enter_interpreter();
- /* Remove one reference on the return object (should delete it) */
+ /* Remove one reference on the return object (should delete it) */
- acpi_ut_remove_reference(info->return_object);
- acpi_ex_exit_interpreter();
- }
+ acpi_ut_remove_reference(info->return_object);
+ acpi_ex_exit_interpreter();
}
cleanup: