ath9k: use ath_hw for DPRINTF() and debug init/exit
DPRINTF() is used in hw specific related code, as such
ensure we don't rely on the private driver core ath_softc
struct when calling it. Drivers can then implement their
own DPRINTF() as they see fit.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ec0abf8..ee1e8b4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -306,7 +306,7 @@
sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
min(sc->common.cachelsz, (u16)64));
- DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+ DPRINTF(sc->sc_ah, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
sc->common.cachelsz, sc->rx.bufsize);
/* Initialize rx descriptors */
@@ -314,7 +314,7 @@
error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
"rx", nbufs, 1);
if (error != 0) {
- DPRINTF(sc, ATH_DBG_FATAL,
+ DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
"failed to allocate rx descriptors: %d\n", error);
goto err;
}
@@ -334,7 +334,7 @@
bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc, ATH_DBG_FATAL,
+ DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
"dma_mapping_error() on RX init\n");
error = -ENOMEM;
goto err;
@@ -539,7 +539,7 @@
if (sc->sc_flags & SC_OP_BEACON_SYNC) {
sc->sc_flags &= ~SC_OP_BEACON_SYNC;
- DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
+ DPRINTF(sc->sc_ah, ATH_DBG_PS, "Reconfigure Beacon timers based on "
"timestamp from the AP\n");
ath_beacon_config(sc, NULL);
}
@@ -552,7 +552,7 @@
* a backup trigger for returning into NETWORK SLEEP state,
* so we are waiting for it as well.
*/
- DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
+ DPRINTF(sc->sc_ah, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
return;
@@ -565,7 +565,7 @@
* been delivered.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+ DPRINTF(sc->sc_ah, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
}
}
@@ -589,13 +589,13 @@
* point.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
+ DPRINTF(sc->sc_ah, ATH_DBG_PS, "All PS CAB frames received, back to "
"sleep\n");
} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
- DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
+ DPRINTF(sc->sc_ah, ATH_DBG_PS, "Going back to sleep after having "
"received PS-Poll data (0x%x)\n",
sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
@@ -811,7 +811,7 @@
bf->bf_buf_addr))) {
dev_kfree_skb_any(requeue_skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc, ATH_DBG_FATAL,
+ DPRINTF(sc->sc_ah, ATH_DBG_FATAL,
"dma_mapping_error() on RX\n");
ath_rx_send_to_mac80211(sc, skb, &rx_status);
break;