ipmi: add oem message handling
Enable userspace to receive messages that a BMC transmits using an OEM
medium. This is used by the HP iLO2.
Based on code originally written by Patrick Schoeller.
Signed-off-by: dann frazier <dannf@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 83c7477..aa83a08 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3284,6 +3284,114 @@
return rv;
}
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM. See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t intf,
+ struct ipmi_smi_msg *msg)
+{
+ struct cmd_rcvr *rcvr;
+ int rv = 0;
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned char chan;
+ ipmi_user_t user = NULL;
+ struct ipmi_system_interface_addr *smi_addr;
+ struct ipmi_recv_msg *recv_msg;
+
+ /*
+ * We expect the OEM SW to perform error checking
+ * so we just do some basic sanity checks
+ */
+ if (msg->rsp_size < 4) {
+ /* Message not big enough, just ignore it. */
+ ipmi_inc_stat(intf, invalid_commands);
+ return 0;
+ }
+
+ if (msg->rsp[2] != 0) {
+ /* An error getting the response, just ignore it. */
+ return 0;
+ }
+
+ /*
+ * This is an OEM Message so the OEM needs to know how
+ * handle the message. We do no interpretation.
+ */
+ netfn = msg->rsp[0] >> 2;
+ cmd = msg->rsp[1];
+ chan = msg->rsp[3] & 0xf;
+
+ rcu_read_lock();
+ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+ if (rcvr) {
+ user = rcvr->user;
+ kref_get(&user->refcount);
+ } else
+ user = NULL;
+ rcu_read_unlock();
+
+ if (user == NULL) {
+ /* We didn't find a user, just give up. */
+ ipmi_inc_stat(intf, unhandled_commands);
+
+ /*
+ * Don't do anything with these messages, just allow
+ * them to be freed.
+ */
+
+ rv = 0;
+ } else {
+ /* Deliver the message to the user. */
+ ipmi_inc_stat(intf, handled_commands);
+
+ recv_msg = ipmi_alloc_recv_msg();
+ if (!recv_msg) {
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
+ rv = 1;
+ kref_put(&user->refcount, free_user);
+ } else {
+ /*
+ * OEM Messages are expected to be delivered via
+ * the system interface to SMS software. We might
+ * need to visit this again depending on OEM
+ * requirements
+ */
+ smi_addr = ((struct ipmi_system_interface_addr *)
+ &(recv_msg->addr));
+ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr->channel = IPMI_BMC_CHANNEL;
+ smi_addr->lun = msg->rsp[0] & 3;
+
+ recv_msg->user = user;
+ recv_msg->user_msg_data = NULL;
+ recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+ recv_msg->msg.netfn = msg->rsp[0] >> 2;
+ recv_msg->msg.cmd = msg->rsp[1];
+ recv_msg->msg.data = recv_msg->msg_data;
+
+ /*
+ * The message starts at byte 4 which follows the
+ * the Channel Byte in the "GET MESSAGE" command
+ */
+ recv_msg->msg.data_len = msg->rsp_size - 4;
+ memcpy(recv_msg->msg_data,
+ &(msg->rsp[4]),
+ msg->rsp_size - 4);
+ deliver_response(recv_msg);
+ }
+ }
+
+ return rv;
+}
+
static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
struct ipmi_smi_msg *msg)
{
@@ -3539,6 +3647,17 @@
goto out;
}
+ /*
+ ** We need to make sure the channels have been initialized.
+ ** The channel_handler routine will set the "curr_channel"
+ ** equal to or greater than IPMI_MAX_CHANNELS when all the
+ ** channels for this interface have been initialized.
+ */
+ if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+ requeue = 1; /* Just put the message back for now */
+ goto out;
+ }
+
switch (intf->channels[chan].medium) {
case IPMI_CHANNEL_MEDIUM_IPMB:
if (msg->rsp[4] & 0x04) {
@@ -3574,11 +3693,20 @@
break;
default:
- /*
- * We don't handle the channel type, so just
- * free the message.
- */
- requeue = 0;
+ /* Check for OEM Channels. Clients had better
+ register for these commands. */
+ if ((intf->channels[chan].medium
+ >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+ && (intf->channels[chan].medium
+ <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+ requeue = handle_oem_get_msg_cmd(intf, msg);
+ } else {
+ /*
+ * We don't handle the channel type, so just
+ * free the message.
+ */
+ requeue = 0;
+ }
}
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))