| /* |
| * linux/drivers/net/wireless/libertas/if_spi.c |
| * |
| * Driver for Marvell SPI WLAN cards. |
| * |
| * Copyright 2008 Analog Devices Inc. |
| * |
| * Authors: |
| * Andrey Yurovsky <andrey@cozybit.com> |
| * Colin McCabe <colin@cozybit.com> |
| * |
| * Inspired by if_sdio.c, Copyright 2007-2008 Pierre Ossman |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/hardirq.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/jiffies.h> |
| #include <linux/list.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| #include <linux/spi/libertas_spi.h> |
| #include <linux/spi/spi.h> |
| |
| #include "host.h" |
| #include "decl.h" |
| #include "defs.h" |
| #include "dev.h" |
| #include "if_spi.h" |
| |
| struct if_spi_packet { |
| struct list_head list; |
| u16 blen; |
| u8 buffer[0] __attribute__((aligned(4))); |
| }; |
| |
| struct if_spi_card { |
| struct spi_device *spi; |
| struct lbs_private *priv; |
| struct libertas_spi_platform_data *pdata; |
| |
| /* The card ID and card revision, as reported by the hardware. */ |
| u16 card_id; |
| u8 card_rev; |
| |
| /* The last time that we initiated an SPU operation */ |
| unsigned long prev_xfer_time; |
| |
| int use_dummy_writes; |
| unsigned long spu_port_delay; |
| unsigned long spu_reg_delay; |
| |
| /* Handles all SPI communication (except for FW load) */ |
| struct workqueue_struct *workqueue; |
| struct work_struct packet_work; |
| struct work_struct resume_work; |
| |
| u8 cmd_buffer[IF_SPI_CMD_BUF_SIZE]; |
| |
| /* A buffer of incoming packets from libertas core. |
| * Since we can't sleep in hw_host_to_card, we have to buffer |
| * them. */ |
| struct list_head cmd_packet_list; |
| struct list_head data_packet_list; |
| |
| /* Protects cmd_packet_list and data_packet_list */ |
| spinlock_t buffer_lock; |
| |
| /* True is card suspended */ |
| u8 suspended; |
| }; |
| |
| static void free_if_spi_card(struct if_spi_card *card) |
| { |
| struct list_head *cursor, *next; |
| struct if_spi_packet *packet; |
| |
| list_for_each_safe(cursor, next, &card->cmd_packet_list) { |
| packet = container_of(cursor, struct if_spi_packet, list); |
| list_del(&packet->list); |
| kfree(packet); |
| } |
| list_for_each_safe(cursor, next, &card->data_packet_list) { |
| packet = container_of(cursor, struct if_spi_packet, list); |
| list_del(&packet->list); |
| kfree(packet); |
| } |
| spi_set_drvdata(card->spi, NULL); |
| kfree(card); |
| } |
| |
| #define MODEL_8385 0x04 |
| #define MODEL_8686 0x0b |
| #define MODEL_8688 0x10 |
| |
| static const struct lbs_fw_table fw_table[] = { |
| { MODEL_8385, "libertas/gspi8385_helper.bin", "libertas/gspi8385.bin" }, |
| { MODEL_8385, "libertas/gspi8385_hlp.bin", "libertas/gspi8385.bin" }, |
| { MODEL_8686, "libertas/gspi8686_v9_helper.bin", "libertas/gspi8686_v9.bin" }, |
| { MODEL_8686, "libertas/gspi8686_hlp.bin", "libertas/gspi8686.bin" }, |
| { MODEL_8688, "libertas/gspi8688_helper.bin", "libertas/gspi8688.bin" }, |
| { 0, NULL, NULL } |
| }; |
| MODULE_FIRMWARE("libertas/gspi8385_helper.bin"); |
| MODULE_FIRMWARE("libertas/gspi8385_hlp.bin"); |
| MODULE_FIRMWARE("libertas/gspi8385.bin"); |
| MODULE_FIRMWARE("libertas/gspi8686_v9_helper.bin"); |
| MODULE_FIRMWARE("libertas/gspi8686_v9.bin"); |
| MODULE_FIRMWARE("libertas/gspi8686_hlp.bin"); |
| MODULE_FIRMWARE("libertas/gspi8686.bin"); |
| MODULE_FIRMWARE("libertas/gspi8688_helper.bin"); |
| MODULE_FIRMWARE("libertas/gspi8688.bin"); |
| |
| |
| /* |
| * SPI Interface Unit Routines |
| * |
| * The SPU sits between the host and the WLAN module. |
| * All communication with the firmware is through SPU transactions. |
| * |
| * First we have to put a SPU register name on the bus. Then we can |
| * either read from or write to that register. |
| * |
| */ |
| |
| static void spu_transaction_init(struct if_spi_card *card) |
| { |
| if (!time_after(jiffies, card->prev_xfer_time + 1)) { |
| /* Unfortunately, the SPU requires a delay between successive |
| * transactions. If our last transaction was more than a jiffy |
| * ago, we have obviously already delayed enough. |
| * If not, we have to busy-wait to be on the safe side. */ |
| ndelay(400); |
| } |
| } |
| |
| static void spu_transaction_finish(struct if_spi_card *card) |
| { |
| card->prev_xfer_time = jiffies; |
| } |
| |
| /* |
| * Write out a byte buffer to an SPI register, |
| * using a series of 16-bit transfers. |
| */ |
| static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) |
| { |
| int err = 0; |
| __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); |
| struct spi_message m; |
| struct spi_transfer reg_trans; |
| struct spi_transfer data_trans; |
| |
| spi_message_init(&m); |
| memset(®_trans, 0, sizeof(reg_trans)); |
| memset(&data_trans, 0, sizeof(data_trans)); |
| |
| /* You must give an even number of bytes to the SPU, even if it |
| * doesn't care about the last one. */ |
| BUG_ON(len & 0x1); |
| |
| spu_transaction_init(card); |
| |
| /* write SPU register index */ |
| reg_trans.tx_buf = ®_out; |
| reg_trans.len = sizeof(reg_out); |
| |
| data_trans.tx_buf = buf; |
| data_trans.len = len; |
| |
| spi_message_add_tail(®_trans, &m); |
| spi_message_add_tail(&data_trans, &m); |
| |
| err = spi_sync(card->spi, &m); |
| spu_transaction_finish(card); |
| return err; |
| } |
| |
| static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) |
| { |
| __le16 buff; |
| |
| buff = cpu_to_le16(val); |
| return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); |
| } |
| |
| static inline int spu_reg_is_port_reg(u16 reg) |
| { |
| switch (reg) { |
| case IF_SPI_IO_RDWRPORT_REG: |
| case IF_SPI_CMD_RDWRPORT_REG: |
| case IF_SPI_DATA_RDWRPORT_REG: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) |
| { |
| unsigned int delay; |
| int err = 0; |
| __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); |
| struct spi_message m; |
| struct spi_transfer reg_trans; |
| struct spi_transfer dummy_trans; |
| struct spi_transfer data_trans; |
| |
| /* |
| * You must take an even number of bytes from the SPU, even if you |
| * don't care about the last one. |
| */ |
| BUG_ON(len & 0x1); |
| |
| spu_transaction_init(card); |
| |
| spi_message_init(&m); |
| memset(®_trans, 0, sizeof(reg_trans)); |
| memset(&dummy_trans, 0, sizeof(dummy_trans)); |
| memset(&data_trans, 0, sizeof(data_trans)); |
| |
| /* write SPU register index */ |
| reg_trans.tx_buf = ®_out; |
| reg_trans.len = sizeof(reg_out); |
| spi_message_add_tail(®_trans, &m); |
| |
| delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay : |
| card->spu_reg_delay; |
| if (card->use_dummy_writes) { |
| /* Clock in dummy cycles while the SPU fills the FIFO */ |
| dummy_trans.len = delay / 8; |
| spi_message_add_tail(&dummy_trans, &m); |
| } else { |
| /* Busy-wait while the SPU fills the FIFO */ |
| reg_trans.delay_usecs = |
| DIV_ROUND_UP((100 + (delay * 10)), 1000); |
| } |
| |
| /* read in data */ |
| data_trans.rx_buf = buf; |
| data_trans.len = len; |
| spi_message_add_tail(&data_trans, &m); |
| |
| err = spi_sync(card->spi, &m); |
| spu_transaction_finish(card); |
| return err; |
| } |
| |
| /* Read 16 bits from an SPI register */ |
| static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) |
| { |
| __le16 buf; |
| int ret; |
| |
| ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); |
| if (ret == 0) |
| *val = le16_to_cpup(&buf); |
| return ret; |
| } |
| |
| /* |
| * Read 32 bits from an SPI register. |
| * The low 16 bits are read first. |
| */ |
| static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) |
| { |
| __le32 buf; |
| int err; |
| |
| err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); |
| if (!err) |
| *val = le32_to_cpup(&buf); |
| return err; |
| } |
| |
| /* |
| * Keep reading 16 bits from an SPI register until you get the correct result. |
| * |
| * If mask = 0, the correct result is any non-zero number. |
| * If mask != 0, the correct result is any number where |
| * number & target_mask == target |
| * |
| * Returns -ETIMEDOUT if a second passes without the correct result. |
| */ |
| static int spu_wait_for_u16(struct if_spi_card *card, u16 reg, |
| u16 target_mask, u16 target) |
| { |
| int err; |
| unsigned long timeout = jiffies + 5*HZ; |
| while (1) { |
| u16 val; |
| err = spu_read_u16(card, reg, &val); |
| if (err) |
| return err; |
| if (target_mask) { |
| if ((val & target_mask) == target) |
| return 0; |
| } else { |
| if (val) |
| return 0; |
| } |
| udelay(100); |
| if (time_after(jiffies, timeout)) { |
| pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n", |
| __func__, val, target_mask, target); |
| return -ETIMEDOUT; |
| } |
| } |
| } |
| |
| /* |
| * Read 16 bits from an SPI register until you receive a specific value. |
| * Returns -ETIMEDOUT if a 4 tries pass without success. |
| */ |
| static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target) |
| { |
| int err, try; |
| for (try = 0; try < 4; ++try) { |
| u32 val = 0; |
| err = spu_read_u32(card, reg, &val); |
| if (err) |
| return err; |
| if (val == target) |
| return 0; |
| mdelay(100); |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int spu_set_interrupt_mode(struct if_spi_card *card, |
| int suppress_host_int, |
| int auto_int) |
| { |
| int err = 0; |
| |
| /* |
| * We can suppress a host interrupt by clearing the appropriate |
| * bit in the "host interrupt status mask" register |
| */ |
| if (suppress_host_int) { |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0); |
| if (err) |
| return err; |
| } else { |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, |
| IF_SPI_HISM_TX_DOWNLOAD_RDY | |
| IF_SPI_HISM_RX_UPLOAD_RDY | |
| IF_SPI_HISM_CMD_DOWNLOAD_RDY | |
| IF_SPI_HISM_CARDEVENT | |
| IF_SPI_HISM_CMD_UPLOAD_RDY); |
| if (err) |
| return err; |
| } |
| |
| /* |
| * If auto-interrupts are on, the completion of certain transactions |
| * will trigger an interrupt automatically. If auto-interrupts |
| * are off, we need to set the "Card Interrupt Cause" register to |
| * trigger a card interrupt. |
| */ |
| if (auto_int) { |
| err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG, |
| IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO | |
| IF_SPI_HICT_RX_UPLOAD_OVER_AUTO | |
| IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO | |
| IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO); |
| if (err) |
| return err; |
| } else { |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0); |
| if (err) |
| return err; |
| } |
| return err; |
| } |
| |
| static int spu_get_chip_revision(struct if_spi_card *card, |
| u16 *card_id, u8 *card_rev) |
| { |
| int err = 0; |
| u32 dev_ctrl; |
| err = spu_read_u32(card, IF_SPI_DEVICEID_CTRL_REG, &dev_ctrl); |
| if (err) |
| return err; |
| *card_id = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dev_ctrl); |
| *card_rev = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dev_ctrl); |
| return err; |
| } |
| |
| static int spu_set_bus_mode(struct if_spi_card *card, u16 mode) |
| { |
| int err = 0; |
| u16 rval; |
| /* set bus mode */ |
| err = spu_write_u16(card, IF_SPI_SPU_BUS_MODE_REG, mode); |
| if (err) |
| return err; |
| /* Check that we were able to read back what we just wrote. */ |
| err = spu_read_u16(card, IF_SPI_SPU_BUS_MODE_REG, &rval); |
| if (err) |
| return err; |
| if ((rval & 0xF) != mode) { |
| pr_err("Can't read bus mode register\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int spu_init(struct if_spi_card *card, int use_dummy_writes) |
| { |
| int err = 0; |
| u32 delay; |
| |
| /* |
| * We have to start up in timed delay mode so that we can safely |
| * read the Delay Read Register. |
| */ |
| card->use_dummy_writes = 0; |
| err = spu_set_bus_mode(card, |
| IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING | |
| IF_SPI_BUS_MODE_DELAY_METHOD_TIMED | |
| IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA); |
| if (err) |
| return err; |
| card->spu_port_delay = 1000; |
| card->spu_reg_delay = 1000; |
| err = spu_read_u32(card, IF_SPI_DELAY_READ_REG, &delay); |
| if (err) |
| return err; |
| card->spu_port_delay = delay & 0x0000ffff; |
| card->spu_reg_delay = (delay & 0xffff0000) >> 16; |
| |
| /* If dummy clock delay mode has been requested, switch to it now */ |
| if (use_dummy_writes) { |
| card->use_dummy_writes = 1; |
| err = spu_set_bus_mode(card, |
| IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING | |
| IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK | |
| IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA); |
| if (err) |
| return err; |
| } |
| |
| lbs_deb_spi("Initialized SPU unit. " |
| "spu_port_delay=0x%04lx, spu_reg_delay=0x%04lx\n", |
| card->spu_port_delay, card->spu_reg_delay); |
| return err; |
| } |
| |
| /* |
| * Firmware Loading |
| */ |
| |
| static int if_spi_prog_helper_firmware(struct if_spi_card *card, |
| const struct firmware *firmware) |
| { |
| int err = 0; |
| int bytes_remaining; |
| const u8 *fw; |
| u8 temp[HELPER_FW_LOAD_CHUNK_SZ]; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| err = spu_set_interrupt_mode(card, 1, 0); |
| if (err) |
| goto out; |
| |
| bytes_remaining = firmware->size; |
| fw = firmware->data; |
| |
| /* Load helper firmware image */ |
| while (bytes_remaining > 0) { |
| /* |
| * Scratch pad 1 should contain the number of bytes we |
| * want to download to the firmware |
| */ |
| err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, |
| HELPER_FW_LOAD_CHUNK_SZ); |
| if (err) |
| goto out; |
| |
| err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG, |
| IF_SPI_HIST_CMD_DOWNLOAD_RDY, |
| IF_SPI_HIST_CMD_DOWNLOAD_RDY); |
| if (err) |
| goto out; |
| |
| /* |
| * Feed the data into the command read/write port reg |
| * in chunks of 64 bytes |
| */ |
| memset(temp, 0, sizeof(temp)); |
| memcpy(temp, fw, |
| min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ)); |
| mdelay(10); |
| err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG, |
| temp, HELPER_FW_LOAD_CHUNK_SZ); |
| if (err) |
| goto out; |
| |
| /* Interrupt the boot code */ |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0); |
| if (err) |
| goto out; |
| err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, |
| IF_SPI_CIC_CMD_DOWNLOAD_OVER); |
| if (err) |
| goto out; |
| bytes_remaining -= HELPER_FW_LOAD_CHUNK_SZ; |
| fw += HELPER_FW_LOAD_CHUNK_SZ; |
| } |
| |
| /* |
| * Once the helper / single stage firmware download is complete, |
| * write 0 to scratch pad 1 and interrupt the |
| * bootloader. This completes the helper download. |
| */ |
| err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK); |
| if (err) |
| goto out; |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0); |
| if (err) |
| goto out; |
| err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, |
| IF_SPI_CIC_CMD_DOWNLOAD_OVER); |
| out: |
| if (err) |
| pr_err("failed to load helper firmware (err=%d)\n", err); |
| lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err); |
| return err; |
| } |
| |
| /* |
| * Returns the length of the next packet the firmware expects us to send. |
| * Sets crc_err if the previous transfer had a CRC error. |
| */ |
| static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card, |
| int *crc_err) |
| { |
| u16 len; |
| int err = 0; |
| |
| /* |
| * wait until the host interrupt status register indicates |
| * that we are ready to download |
| */ |
| err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG, |
| IF_SPI_HIST_CMD_DOWNLOAD_RDY, |
| IF_SPI_HIST_CMD_DOWNLOAD_RDY); |
| if (err) { |
| pr_err("timed out waiting for host_int_status\n"); |
| return err; |
| } |
| |
| /* Ask the device how many bytes of firmware it wants. */ |
| err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len); |
| if (err) |
| return err; |
| |
| if (len > IF_SPI_CMD_BUF_SIZE) { |
| pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n", |
| len); |
| return -EIO; |
| } |
| if (len & 0x1) { |
| lbs_deb_spi("%s: crc error\n", __func__); |
| len &= ~0x1; |
| *crc_err = 1; |
| } else |
| *crc_err = 0; |
| |
| return len; |
| } |
| |
| static int if_spi_prog_main_firmware(struct if_spi_card *card, |
| const struct firmware *firmware) |
| { |
| struct lbs_private *priv = card->priv; |
| int len, prev_len; |
| int bytes, crc_err = 0, err = 0; |
| const u8 *fw; |
| u16 num_crc_errs; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| err = spu_set_interrupt_mode(card, 1, 0); |
| if (err) |
| goto out; |
| |
| err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0); |
| if (err) { |
| netdev_err(priv->dev, |
| "%s: timed out waiting for initial scratch reg = 0\n", |
| __func__); |
| goto out; |
| } |
| |
| num_crc_errs = 0; |
| prev_len = 0; |
| bytes = firmware->size; |
| fw = firmware->data; |
| while ((len = if_spi_prog_main_firmware_check_len(card, &crc_err))) { |
| if (len < 0) { |
| err = len; |
| goto out; |
| } |
| if (bytes < 0) { |
| /* |
| * If there are no more bytes left, we would normally |
| * expect to have terminated with len = 0 |
| */ |
| netdev_err(priv->dev, |
| "Firmware load wants more bytes than we have to offer.\n"); |
| break; |
| } |
| if (crc_err) { |
| /* Previous transfer failed. */ |
| if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) { |
| pr_err("Too many CRC errors encountered in firmware load.\n"); |
| err = -EIO; |
| goto out; |
| } |
| } else { |
| /* Previous transfer succeeded. Advance counters. */ |
| bytes -= prev_len; |
| fw += prev_len; |
| } |
| if (bytes < len) { |
| memset(card->cmd_buffer, 0, len); |
| memcpy(card->cmd_buffer, fw, bytes); |
| } else |
| memcpy(card->cmd_buffer, fw, len); |
| |
| err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0); |
| if (err) |
| goto out; |
| err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG, |
| card->cmd_buffer, len); |
| if (err) |
| goto out; |
| err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG , |
| IF_SPI_CIC_CMD_DOWNLOAD_OVER); |
| if (err) |
| goto out; |
| prev_len = len; |
| } |
| if (bytes > prev_len) { |
| pr_err("firmware load wants fewer bytes than we have to offer\n"); |
| } |
| |
| /* Confirm firmware download */ |
| err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG, |
| SUCCESSFUL_FW_DOWNLOAD_MAGIC); |
| if (err) { |
| pr_err("failed to confirm the firmware download\n"); |
| goto out; |
| } |
| |
| out: |
| if (err) |
| pr_err("failed to load firmware (err=%d)\n", err); |
| lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err); |
| return err; |
| } |
| |
| /* |
| * SPI Transfer Thread |
| * |
| * The SPI worker handles all SPI transfers, so there is no need for a lock. |
| */ |
| |
| /* Move a command from the card to the host */ |
| static int if_spi_c2h_cmd(struct if_spi_card *card) |
| { |
| struct lbs_private *priv = card->priv; |
| unsigned long flags; |
| int err = 0; |
| u16 len; |
| u8 i; |
| |
| /* |
| * We need a buffer big enough to handle whatever people send to |
| * hw_host_to_card |
| */ |
| BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE); |
| BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE); |
| |
| /* |
| * It's just annoying if the buffer size isn't a multiple of 4, because |
| * then we might have len < IF_SPI_CMD_BUF_SIZE but |
| * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE |
| */ |
| BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0); |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| /* How many bytes are there to read? */ |
| err = spu_read_u16(card, IF_SPI_SCRATCH_2_REG, &len); |
| if (err) |
| goto out; |
| if (!len) { |
| netdev_err(priv->dev, "%s: error: card has no data for host\n", |
| __func__); |
| err = -EINVAL; |
| goto out; |
| } else if (len > IF_SPI_CMD_BUF_SIZE) { |
| netdev_err(priv->dev, |
| "%s: error: response packet too large: %d bytes, but maximum is %d\n", |
| __func__, len, IF_SPI_CMD_BUF_SIZE); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| /* Read the data from the WLAN module into our command buffer */ |
| err = spu_read(card, IF_SPI_CMD_RDWRPORT_REG, |
| card->cmd_buffer, ALIGN(len, 4)); |
| if (err) |
| goto out; |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| i = (priv->resp_idx == 0) ? 1 : 0; |
| BUG_ON(priv->resp_len[i]); |
| priv->resp_len[i] = len; |
| memcpy(priv->resp_buf[i], card->cmd_buffer, len); |
| lbs_notify_command_response(priv, i); |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| out: |
| if (err) |
| netdev_err(priv->dev, "%s: err=%d\n", __func__, err); |
| lbs_deb_leave(LBS_DEB_SPI); |
| return err; |
| } |
| |
| /* Move data from the card to the host */ |
| static int if_spi_c2h_data(struct if_spi_card *card) |
| { |
| struct lbs_private *priv = card->priv; |
| struct sk_buff *skb; |
| char *data; |
| u16 len; |
| int err = 0; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| /* How many bytes are there to read? */ |
| err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len); |
| if (err) |
| goto out; |
| if (!len) { |
| netdev_err(priv->dev, "%s: error: card has no data for host\n", |
| __func__); |
| err = -EINVAL; |
| goto out; |
| } else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) { |
| netdev_err(priv->dev, |
| "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n", |
| __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| /* TODO: should we allocate a smaller skb if we have less data? */ |
| skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); |
| if (!skb) { |
| err = -ENOBUFS; |
| goto out; |
| } |
| skb_reserve(skb, IPFIELD_ALIGN_OFFSET); |
| data = skb_put(skb, len); |
| |
| /* Read the data from the WLAN module into our skb... */ |
| err = spu_read(card, IF_SPI_DATA_RDWRPORT_REG, data, ALIGN(len, 4)); |
| if (err) |
| goto free_skb; |
| |
| /* pass the SKB to libertas */ |
| err = lbs_process_rxed_packet(card->priv, skb); |
| if (err) |
| goto free_skb; |
| |
| /* success */ |
| goto out; |
| |
| free_skb: |
| dev_kfree_skb(skb); |
| out: |
| if (err) |
| netdev_err(priv->dev, "%s: err=%d\n", __func__, err); |
| lbs_deb_leave(LBS_DEB_SPI); |
| return err; |
| } |
| |
| /* Move data or a command from the host to the card. */ |
| static void if_spi_h2c(struct if_spi_card *card, |
| struct if_spi_packet *packet, int type) |
| { |
| struct lbs_private *priv = card->priv; |
| int err = 0; |
| u16 int_type, port_reg; |
| |
| switch (type) { |
| case MVMS_DAT: |
| int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER; |
| port_reg = IF_SPI_DATA_RDWRPORT_REG; |
| break; |
| case MVMS_CMD: |
| int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER; |
| port_reg = IF_SPI_CMD_RDWRPORT_REG; |
| break; |
| default: |
| netdev_err(priv->dev, "can't transfer buffer of type %d\n", |
| type); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| /* Write the data to the card */ |
| err = spu_write(card, port_reg, packet->buffer, packet->blen); |
| if (err) |
| goto out; |
| |
| out: |
| kfree(packet); |
| |
| if (err) |
| netdev_err(priv->dev, "%s: error %d\n", __func__, err); |
| } |
| |
| /* Inform the host about a card event */ |
| static void if_spi_e2h(struct if_spi_card *card) |
| { |
| int err = 0; |
| u32 cause; |
| struct lbs_private *priv = card->priv; |
| |
| err = spu_read_u32(card, IF_SPI_SCRATCH_3_REG, &cause); |
| if (err) |
| goto out; |
| |
| /* re-enable the card event interrupt */ |
| spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, |
| ~IF_SPI_HICU_CARD_EVENT); |
| |
| /* generate a card interrupt */ |
| spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT); |
| |
| lbs_queue_event(priv, cause & 0xff); |
| out: |
| if (err) |
| netdev_err(priv->dev, "%s: error %d\n", __func__, err); |
| } |
| |
| static void if_spi_host_to_card_worker(struct work_struct *work) |
| { |
| int err; |
| struct if_spi_card *card; |
| u16 hiStatus; |
| unsigned long flags; |
| struct if_spi_packet *packet; |
| struct lbs_private *priv; |
| |
| card = container_of(work, struct if_spi_card, packet_work); |
| priv = card->priv; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| /* |
| * Read the host interrupt status register to see what we |
| * can do. |
| */ |
| err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG, |
| &hiStatus); |
| if (err) { |
| netdev_err(priv->dev, "I/O error\n"); |
| goto err; |
| } |
| |
| if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY) { |
| err = if_spi_c2h_cmd(card); |
| if (err) |
| goto err; |
| } |
| if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY) { |
| err = if_spi_c2h_data(card); |
| if (err) |
| goto err; |
| } |
| |
| /* |
| * workaround: in PS mode, the card does not set the Command |
| * Download Ready bit, but it sets TX Download Ready. |
| */ |
| if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY || |
| (card->priv->psstate != PS_STATE_FULL_POWER && |
| (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) { |
| /* |
| * This means two things. First of all, |
| * if there was a previous command sent, the card has |
| * successfully received it. |
| * Secondly, it is now ready to download another |
| * command. |
| */ |
| lbs_host_to_card_done(card->priv); |
| |
| /* Do we have any command packets from the host to send? */ |
| packet = NULL; |
| spin_lock_irqsave(&card->buffer_lock, flags); |
| if (!list_empty(&card->cmd_packet_list)) { |
| packet = (struct if_spi_packet *)(card-> |
| cmd_packet_list.next); |
| list_del(&packet->list); |
| } |
| spin_unlock_irqrestore(&card->buffer_lock, flags); |
| |
| if (packet) |
| if_spi_h2c(card, packet, MVMS_CMD); |
| } |
| if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) { |
| /* Do we have any data packets from the host to send? */ |
| packet = NULL; |
| spin_lock_irqsave(&card->buffer_lock, flags); |
| if (!list_empty(&card->data_packet_list)) { |
| packet = (struct if_spi_packet *)(card-> |
| data_packet_list.next); |
| list_del(&packet->list); |
| } |
| spin_unlock_irqrestore(&card->buffer_lock, flags); |
| |
| if (packet) |
| if_spi_h2c(card, packet, MVMS_DAT); |
| } |
| if (hiStatus & IF_SPI_HIST_CARD_EVENT) |
| if_spi_e2h(card); |
| |
| err: |
| if (err) |
| netdev_err(priv->dev, "%s: got error %d\n", __func__, err); |
| |
| lbs_deb_leave(LBS_DEB_SPI); |
| } |
| |
| /* |
| * Host to Card |
| * |
| * Called from Libertas to transfer some data to the WLAN device |
| * We can't sleep here. |
| */ |
| static int if_spi_host_to_card(struct lbs_private *priv, |
| u8 type, u8 *buf, u16 nb) |
| { |
| int err = 0; |
| unsigned long flags; |
| struct if_spi_card *card = priv->card; |
| struct if_spi_packet *packet; |
| u16 blen; |
| |
| lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb); |
| |
| if (nb == 0) { |
| netdev_err(priv->dev, "%s: invalid size requested: %d\n", |
| __func__, nb); |
| err = -EINVAL; |
| goto out; |
| } |
| blen = ALIGN(nb, 4); |
| packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC); |
| if (!packet) { |
| err = -ENOMEM; |
| goto out; |
| } |
| packet->blen = blen; |
| memcpy(packet->buffer, buf, nb); |
| memset(packet->buffer + nb, 0, blen - nb); |
| |
| switch (type) { |
| case MVMS_CMD: |
| priv->dnld_sent = DNLD_CMD_SENT; |
| spin_lock_irqsave(&card->buffer_lock, flags); |
| list_add_tail(&packet->list, &card->cmd_packet_list); |
| spin_unlock_irqrestore(&card->buffer_lock, flags); |
| break; |
| case MVMS_DAT: |
| priv->dnld_sent = DNLD_DATA_SENT; |
| spin_lock_irqsave(&card->buffer_lock, flags); |
| list_add_tail(&packet->list, &card->data_packet_list); |
| spin_unlock_irqrestore(&card->buffer_lock, flags); |
| break; |
| default: |
| netdev_err(priv->dev, "can't transfer buffer of type %d\n", |
| type); |
| err = -EINVAL; |
| break; |
| } |
| |
| /* Queue spi xfer work */ |
| queue_work(card->workqueue, &card->packet_work); |
| out: |
| lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err); |
| return err; |
| } |
| |
| /* |
| * Host Interrupts |
| * |
| * Service incoming interrupts from the WLAN device. We can't sleep here, so |
| * don't try to talk on the SPI bus, just queue the SPI xfer work. |
| */ |
| static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id) |
| { |
| struct if_spi_card *card = dev_id; |
| |
| queue_work(card->workqueue, &card->packet_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * SPI callbacks |
| */ |
| |
| static int if_spi_init_card(struct if_spi_card *card) |
| { |
| struct lbs_private *priv = card->priv; |
| int err, i; |
| u32 scratch; |
| const struct firmware *helper = NULL; |
| const struct firmware *mainfw = NULL; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| err = spu_init(card, card->pdata->use_dummy_writes); |
| if (err) |
| goto out; |
| err = spu_get_chip_revision(card, &card->card_id, &card->card_rev); |
| if (err) |
| goto out; |
| |
| err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch); |
| if (err) |
| goto out; |
| if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC) |
| lbs_deb_spi("Firmware is already loaded for " |
| "Marvell WLAN 802.11 adapter\n"); |
| else { |
| /* Check if we support this card */ |
| for (i = 0; i < ARRAY_SIZE(fw_table); i++) { |
| if (card->card_id == fw_table[i].model) |
| break; |
| } |
| if (i == ARRAY_SIZE(fw_table)) { |
| netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n", |
| card->card_id); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| err = lbs_get_firmware(&card->spi->dev, NULL, NULL, |
| card->card_id, &fw_table[0], &helper, |
| &mainfw); |
| if (err) { |
| netdev_err(priv->dev, "failed to find firmware (%d)\n", |
| err); |
| goto out; |
| } |
| |
| lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter " |
| "(chip_id = 0x%04x, chip_rev = 0x%02x) " |
| "attached to SPI bus_num %d, chip_select %d. " |
| "spi->max_speed_hz=%d\n", |
| card->card_id, card->card_rev, |
| card->spi->master->bus_num, |
| card->spi->chip_select, |
| card->spi->max_speed_hz); |
| err = if_spi_prog_helper_firmware(card, helper); |
| if (err) |
| goto out; |
| err = if_spi_prog_main_firmware(card, mainfw); |
| if (err) |
| goto out; |
| lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n"); |
| } |
| |
| err = spu_set_interrupt_mode(card, 0, 1); |
| if (err) |
| goto out; |
| |
| out: |
| if (helper) |
| release_firmware(helper); |
| if (mainfw) |
| release_firmware(mainfw); |
| |
| lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err); |
| |
| return err; |
| } |
| |
| static void if_spi_resume_worker(struct work_struct *work) |
| { |
| struct if_spi_card *card; |
| |
| card = container_of(work, struct if_spi_card, resume_work); |
| |
| if (card->suspended) { |
| if (card->pdata->setup) |
| card->pdata->setup(card->spi); |
| |
| /* Init card ... */ |
| if_spi_init_card(card); |
| |
| enable_irq(card->spi->irq); |
| |
| /* And resume it ... */ |
| lbs_resume(card->priv); |
| |
| card->suspended = 0; |
| } |
| } |
| |
| static int __devinit if_spi_probe(struct spi_device *spi) |
| { |
| struct if_spi_card *card; |
| struct lbs_private *priv = NULL; |
| struct libertas_spi_platform_data *pdata = spi->dev.platform_data; |
| int err = 0; |
| |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| if (!pdata) { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (pdata->setup) { |
| err = pdata->setup(spi); |
| if (err) |
| goto out; |
| } |
| |
| /* Allocate card structure to represent this specific device */ |
| card = kzalloc(sizeof(struct if_spi_card), GFP_KERNEL); |
| if (!card) { |
| err = -ENOMEM; |
| goto teardown; |
| } |
| spi_set_drvdata(spi, card); |
| card->pdata = pdata; |
| card->spi = spi; |
| card->prev_xfer_time = jiffies; |
| |
| INIT_LIST_HEAD(&card->cmd_packet_list); |
| INIT_LIST_HEAD(&card->data_packet_list); |
| spin_lock_init(&card->buffer_lock); |
| |
| /* Initialize the SPI Interface Unit */ |
| |
| /* Firmware load */ |
| err = if_spi_init_card(card); |
| if (err) |
| goto free_card; |
| |
| /* |
| * Register our card with libertas. |
| * This will call alloc_etherdev. |
| */ |
| priv = lbs_add_card(card, &spi->dev); |
| if (!priv) { |
| err = -ENOMEM; |
| goto free_card; |
| } |
| card->priv = priv; |
| priv->setup_fw_on_resume = 1; |
| priv->card = card; |
| priv->hw_host_to_card = if_spi_host_to_card; |
| priv->enter_deep_sleep = NULL; |
| priv->exit_deep_sleep = NULL; |
| priv->reset_deep_sleep_wakeup = NULL; |
| priv->fw_ready = 1; |
| |
| /* Initialize interrupt handling stuff. */ |
| card->workqueue = create_workqueue("libertas_spi"); |
| INIT_WORK(&card->packet_work, if_spi_host_to_card_worker); |
| INIT_WORK(&card->resume_work, if_spi_resume_worker); |
| |
| err = request_irq(spi->irq, if_spi_host_interrupt, |
| IRQF_TRIGGER_FALLING, "libertas_spi", card); |
| if (err) { |
| pr_err("can't get host irq line-- request_irq failed\n"); |
| goto terminate_workqueue; |
| } |
| |
| /* |
| * Start the card. |
| * This will call register_netdev, and we'll start |
| * getting interrupts... |
| */ |
| err = lbs_start_card(priv); |
| if (err) |
| goto release_irq; |
| |
| lbs_deb_spi("Finished initializing WLAN module.\n"); |
| |
| /* successful exit */ |
| goto out; |
| |
| release_irq: |
| free_irq(spi->irq, card); |
| terminate_workqueue: |
| flush_workqueue(card->workqueue); |
| destroy_workqueue(card->workqueue); |
| lbs_remove_card(priv); /* will call free_netdev */ |
| free_card: |
| free_if_spi_card(card); |
| teardown: |
| if (pdata->teardown) |
| pdata->teardown(spi); |
| out: |
| lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err); |
| return err; |
| } |
| |
| static int __devexit libertas_spi_remove(struct spi_device *spi) |
| { |
| struct if_spi_card *card = spi_get_drvdata(spi); |
| struct lbs_private *priv = card->priv; |
| |
| lbs_deb_spi("libertas_spi_remove\n"); |
| lbs_deb_enter(LBS_DEB_SPI); |
| |
| cancel_work_sync(&card->resume_work); |
| |
| lbs_stop_card(priv); |
| lbs_remove_card(priv); /* will call free_netdev */ |
| |
| free_irq(spi->irq, card); |
| flush_workqueue(card->workqueue); |
| destroy_workqueue(card->workqueue); |
| if (card->pdata->teardown) |
| card->pdata->teardown(spi); |
| free_if_spi_card(card); |
| lbs_deb_leave(LBS_DEB_SPI); |
| return 0; |
| } |
| |
| static int if_spi_suspend(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct if_spi_card *card = spi_get_drvdata(spi); |
| |
| if (!card->suspended) { |
| lbs_suspend(card->priv); |
| flush_workqueue(card->workqueue); |
| disable_irq(spi->irq); |
| |
| if (card->pdata->teardown) |
| card->pdata->teardown(spi); |
| card->suspended = 1; |
| } |
| |
| return 0; |
| } |
| |
| static int if_spi_resume(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct if_spi_card *card = spi_get_drvdata(spi); |
| |
| /* Schedule delayed work */ |
| schedule_work(&card->resume_work); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops if_spi_pm_ops = { |
| .suspend = if_spi_suspend, |
| .resume = if_spi_resume, |
| }; |
| |
| static struct spi_driver libertas_spi_driver = { |
| .probe = if_spi_probe, |
| .remove = __devexit_p(libertas_spi_remove), |
| .driver = { |
| .name = "libertas_spi", |
| .owner = THIS_MODULE, |
| .pm = &if_spi_pm_ops, |
| }, |
| }; |
| |
| /* |
| * Module functions |
| */ |
| |
| static int __init if_spi_init_module(void) |
| { |
| int ret = 0; |
| lbs_deb_enter(LBS_DEB_SPI); |
| printk(KERN_INFO "libertas_spi: Libertas SPI driver\n"); |
| ret = spi_register_driver(&libertas_spi_driver); |
| lbs_deb_leave(LBS_DEB_SPI); |
| return ret; |
| } |
| |
| static void __exit if_spi_exit_module(void) |
| { |
| lbs_deb_enter(LBS_DEB_SPI); |
| spi_unregister_driver(&libertas_spi_driver); |
| lbs_deb_leave(LBS_DEB_SPI); |
| } |
| |
| module_init(if_spi_init_module); |
| module_exit(if_spi_exit_module); |
| |
| MODULE_DESCRIPTION("Libertas SPI WLAN Driver"); |
| MODULE_AUTHOR("Andrey Yurovsky <andrey@cozybit.com>, " |
| "Colin McCabe <colin@cozybit.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("spi:libertas_spi"); |