V4L/DVB (3319): Changed indention for define's and their values
- Indention for values of several request defines were not TabSized=8.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h
index 4a3e8c7..a808d48 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.h
+++ b/drivers/media/dvb/dvb-usb/vp702x.h
@@ -13,47 +13,47 @@
/* commands are read and written with USB control messages */
/* consecutive read/write operation */
-#define REQUEST_OUT 0xB2
-#define REQUEST_IN 0xB3
+#define REQUEST_OUT 0xB2
+#define REQUEST_IN 0xB3
/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0
* request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer
* the returning buffer looks as follows
* request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */
-#define GET_TUNER_STATUS 0x05
+#define GET_TUNER_STATUS 0x05
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */
-#define GET_SYSTEM_STRING 0x06
+#define GET_SYSTEM_STRING 0x06
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */
-#define SET_DISEQC_CMD 0x08
+#define SET_DISEQC_CMD 0x08
/* additional out buffer:
* 0 1 2 3 4
* len X1 X2 X3 X4
* additional in buffer:
* 0 1 2
- * N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */
+ * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */
-#define SET_LNB_POWER 0x09
+#define SET_LNB_POWER 0x09
/* additional out buffer:
* 0 1 2
* 0x00 0xff 1 = on, 0 = off
* additional in buffer:
* 0 1 2
- * N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */
+ * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */
-#define GET_MAC_ADDRESS 0x0A
+#define GET_MAC_ADDRESS 0x0A
/* #define GET_MAC_ADDRESS 0x0B */
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */
-#define SET_PID_FILTER 0x11
+#define SET_PID_FILTER 0x11
/* additional in buffer:
* 0 1 ... 14 15 16
* PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */
@@ -64,39 +64,38 @@
* freq0 freq1 divstep srate0 srate1 srate2 flag chksum
*/
-
/* one direction requests */
-#define READ_REMOTE_REQ 0xB4
+#define READ_REMOTE_REQ 0xB4
/* IN i: 0; v: 0; b[0] == request, b[1] == key */
-#define READ_PID_NUMBER_REQ 0xB5
+#define READ_PID_NUMBER_REQ 0xB5
/* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */
-#define WRITE_EEPROM_REQ 0xB6
+#define WRITE_EEPROM_REQ 0xB6
/* OUT i: offset; v: value to write; no extra buffer */
-#define READ_EEPROM_REQ 0xB7
+#define READ_EEPROM_REQ 0xB7
/* IN i: bufferlen; v: offset; buffer with bufferlen bytes */
-#define READ_STATUS 0xB8
+#define READ_STATUS 0xB8
/* IN i: 0; v: 0; bufferlen 10 */
-#define READ_TUNER_REG_REQ 0xB9
+#define READ_TUNER_REG_REQ 0xB9
/* IN i: 0; v: register; b[0] = value */
-#define READ_FX2_REG_REQ 0xBA
+#define READ_FX2_REG_REQ 0xBA
/* IN i: offset; v: 0; b[0] = value */
-#define WRITE_FX2_REG_REQ 0xBB
+#define WRITE_FX2_REG_REQ 0xBB
/* OUT i: offset; v: value to write; 1 byte extra buffer */
-#define SET_TUNER_POWER_REQ 0xBC
+#define SET_TUNER_POWER_REQ 0xBC
/* IN i: 0 = power off, 1 = power on */
-#define WRITE_TUNER_REG_REQ 0xBD
+#define WRITE_TUNER_REG_REQ 0xBD
/* IN i: register, v: value to write, no extra buffer */
-#define RESET_TUNER 0xBE
+#define RESET_TUNER 0xBE
/* IN i: 0, v: 0, no extra buffer */
extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);