Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc:
[MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected
[MMC] Add OMAP MMC host driver
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index d260d92..5bcbb6e 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -120,14 +120,27 @@
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
-void (*post_set_mode) (struct ata_port *ap);
+void (*post_set_mode) (struct ata_port *);
+unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
</programlisting>
<para>
Hooks called prior to the issue of SET FEATURES - XFER MODE
- command. dev->pio_mode is guaranteed to be valid when
- ->set_piomode() is called, and dev->dma_mode is guaranteed to be
- valid when ->set_dmamode() is called. ->post_set_mode() is
+ command. The optional ->mode_filter() hook is called when libata
+ has built a mask of the possible modes. This is passed to the
+ ->mode_filter() function which should return a mask of valid modes
+ after filtering those unsuitable due to hardware limits. It is not
+ valid to use this interface to add modes.
+ </para>
+ <para>
+ dev->pio_mode and dev->dma_mode are guaranteed to be valid when
+ ->set_piomode() and when ->set_dmamode() is called. The timings for
+ any other drive sharing the cable will also be valid at this point.
+ That is the library records the decisions for the modes of each
+ drive on a channel before it attempts to set any of them.
+ </para>
+ <para>
+ ->post_set_mode() is
called unconditionally, after the SET FEATURES - XFER MODE
command completes successfully.
</para>
@@ -230,6 +243,32 @@
</sect2>
+ <sect2><title>Private tuning method</title>
+ <programlisting>
+void (*set_mode) (struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ By default libata performs drive and controller tuning in
+ accordance with the ATA timing rules and also applies blacklists
+ and cable limits. Some controllers need special handling and have
+ custom tuning rules, typically raid controllers that use ATA
+ commands but do not actually do drive timing.
+ </para>
+
+ <warning>
+ <para>
+ This hook should not be used to replace the standard controller
+ tuning logic when a controller has quirks. Replacing the default
+ tuning logic in that case would bypass handling for drive and
+ bridge quirks that may be important to data reliability. If a
+ controller needs to filter the mode selection it should use the
+ mode_filter hook instead.
+ </para>
+ </warning>
+
+ </sect2>
+
<sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 495858b..59d0c74 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -127,13 +127,6 @@
---------------------------
-What: EXPORT_SYMBOL(lookup_hash)
-When: January 2006
-Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
-Who: Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: CONFIG_FORCED_INLINING
When: June 2006
Why: Config option is there to see if gcc is good enough. (in january
@@ -241,3 +234,15 @@
Who: Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
+
+What: find_trylock_page
+When: January 2007
+Why: The interface no longer has any callers left in the kernel. It
+ is an odd interface (compared with other find_*_page functions), in
+ that it does not take a refcount to the page, only the page lock.
+ It should be replaced with find_get_page or find_lock_page if possible.
+ This feature removal can be reevaluated if users of the interface
+ cannot cleanly use something else.
+Who: Nick Piggin <npiggin@suse.de>
+
+---------------------------
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
new file mode 100644
index 0000000..8c35c04
--- /dev/null
+++ b/Documentation/leds-class.txt
@@ -0,0 +1,71 @@
+LED handling under Linux
+========================
+
+If you're reading this and thinking about keyboard leds, these are
+handled by the input subsystem and the led class is *not* needed.
+
+In its simplest form, the LED class just allows control of LEDs from
+userspace. LEDs appear in /sys/class/leds/. The brightness file will
+set the brightness of the LED (taking a value 0-255). Most LEDs don't
+have hardware brightness support so will just be turned on for non-zero
+brightness settings.
+
+The class also introduces the optional concept of an LED trigger. A trigger
+is a kernel based source of led events. Triggers can either be simple or
+complex. A simple trigger isn't configurable and is designed to slot into
+existing subsystems with minimal additional code. Examples are the ide-disk,
+nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
+optimises away.
+
+Complex triggers whilst available to all LEDs have LED specific
+parameters and work on a per LED basis. The timer trigger is an example.
+
+You can change triggers in a similar manner to the way an IO scheduler
+is chosen (via /sys/class/leds/<device>/trigger). Trigger specific
+parameters can appear in /sys/class/leds/<device> once a given trigger is
+selected.
+
+
+Design Philosophy
+=================
+
+The underlying design philosophy is simplicity. LEDs are simple devices
+and the aim is to keep a small amount of code giving as much functionality
+as possible. Please keep this in mind when suggesting enhancements.
+
+
+LED Device Naming
+=================
+
+Is currently of the form:
+
+"devicename:colour"
+
+There have been calls for LED properties such as colour to be exported as
+individual led class attributes. As a solution which doesn't incur as much
+overhead, I suggest these become part of the device name. The naming scheme
+above leaves scope for further attributes should they be needed.
+
+
+Known Issues
+============
+
+The LED Trigger core cannot be a module as the simple trigger functions
+would cause nightmare dependency issues. I see this as a minor issue
+compared to the benefits the simple trigger functionality brings. The
+rest of the LED subsystem can be modular.
+
+Some leds can be programmed to flash in hardware. As this isn't a generic
+LED device property, this should be exported as a device specific sysfs
+attribute rather than part of the class if this functionality is required.
+
+
+Future Development
+==================
+
+At the moment, a trigger can't be created specifically for a single LED.
+There are a number of cases where a trigger might only be mappable to a
+particular LED (ACPI?). The addition of triggers provided by the LED driver
+should cover this option and be possible to add without breaking the
+current interface.
+
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
new file mode 100644
index 0000000..f855031
--- /dev/null
+++ b/Documentation/memory-barriers.txt
@@ -0,0 +1,1913 @@
+ ============================
+ LINUX KERNEL MEMORY BARRIERS
+ ============================
+
+By: David Howells <dhowells@redhat.com>
+
+Contents:
+
+ (*) Abstract memory access model.
+
+ - Device operations.
+ - Guarantees.
+
+ (*) What are memory barriers?
+
+ - Varieties of memory barrier.
+ - What may not be assumed about memory barriers?
+ - Data dependency barriers.
+ - Control dependencies.
+ - SMP barrier pairing.
+ - Examples of memory barrier sequences.
+
+ (*) Explicit kernel barriers.
+
+ - Compiler barrier.
+ - The CPU memory barriers.
+ - MMIO write barrier.
+
+ (*) Implicit kernel memory barriers.
+
+ - Locking functions.
+ - Interrupt disabling functions.
+ - Miscellaneous functions.
+
+ (*) Inter-CPU locking barrier effects.
+
+ - Locks vs memory accesses.
+ - Locks vs I/O accesses.
+
+ (*) Where are memory barriers needed?
+
+ - Interprocessor interaction.
+ - Atomic operations.
+ - Accessing devices.
+ - Interrupts.
+
+ (*) Kernel I/O barrier effects.
+
+ (*) Assumed minimum execution ordering model.
+
+ (*) The effects of the cpu cache.
+
+ - Cache coherency.
+ - Cache coherency vs DMA.
+ - Cache coherency vs MMIO.
+
+ (*) The things CPUs get up to.
+
+ - And then there's the Alpha.
+
+ (*) References.
+
+
+============================
+ABSTRACT MEMORY ACCESS MODEL
+============================
+
+Consider the following abstract model of the system:
+
+ : :
+ : :
+ : :
+ +-------+ : +--------+ : +-------+
+ | | : | | : | |
+ | | : | | : | |
+ | CPU 1 |<----->| Memory |<----->| CPU 2 |
+ | | : | | : | |
+ | | : | | : | |
+ +-------+ : +--------+ : +-------+
+ ^ : ^ : ^
+ | : | : |
+ | : | : |
+ | : v : |
+ | : +--------+ : |
+ | : | | : |
+ | : | | : |
+ +---------->| Device |<----------+
+ : | | :
+ : | | :
+ : +--------+ :
+ : :
+
+Each CPU executes a program that generates memory access operations. In the
+abstract CPU, memory operation ordering is very relaxed, and a CPU may actually
+perform the memory operations in any order it likes, provided program causality
+appears to be maintained. Similarly, the compiler may also arrange the
+instructions it emits in any order it likes, provided it doesn't affect the
+apparent operation of the program.
+
+So in the above diagram, the effects of the memory operations performed by a
+CPU are perceived by the rest of the system as the operations cross the
+interface between the CPU and rest of the system (the dotted lines).
+
+
+For example, consider the following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1; B == 2 }
+ A = 3; x = A;
+ B = 4; y = B;
+
+The set of accesses as seen by the memory system in the middle can be arranged
+in 24 different combinations:
+
+ STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4
+ STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3
+ STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4
+ STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4
+ STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3
+ STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4
+ STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4
+ STORE B=4, ...
+ ...
+
+and can thus result in four different combinations of values:
+
+ x == 1, y == 2
+ x == 1, y == 4
+ x == 3, y == 2
+ x == 3, y == 4
+
+
+Furthermore, the stores committed by a CPU to the memory system may not be
+perceived by the loads made by another CPU in the same order as the stores were
+committed.
+
+
+As a further example, consider this sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4; Q = P;
+ P = &B D = *Q;
+
+There is an obvious data dependency here, as the value loaded into D depends on
+the address retrieved from P by CPU 2. At the end of the sequence, any of the
+following results are possible:
+
+ (Q == &A) and (D == 1)
+ (Q == &B) and (D == 2)
+ (Q == &B) and (D == 4)
+
+Note that CPU 2 will never try and load C into D because the CPU will load P
+into Q before issuing the load of *Q.
+
+
+DEVICE OPERATIONS
+-----------------
+
+Some devices present their control interfaces as collections of memory
+locations, but the order in which the control registers are accessed is very
+important. For instance, imagine an ethernet card with a set of internal
+registers that are accessed through an address port register (A) and a data
+port register (D). To read internal register 5, the following code might then
+be used:
+
+ *A = 5;
+ x = *D;
+
+but this might show up as either of the following two sequences:
+
+ STORE *A = 5, x = LOAD *D
+ x = LOAD *D, STORE *A = 5
+
+the second of which will almost certainly result in a malfunction, since it set
+the address _after_ attempting to read the register.
+
+
+GUARANTEES
+----------
+
+There are some minimal guarantees that may be expected of a CPU:
+
+ (*) On any given CPU, dependent memory accesses will be issued in order, with
+ respect to itself. This means that for:
+
+ Q = P; D = *Q;
+
+ the CPU will issue the following memory operations:
+
+ Q = LOAD P, D = LOAD *Q
+
+ and always in that order.
+
+ (*) Overlapping loads and stores within a particular CPU will appear to be
+ ordered within that CPU. This means that for:
+
+ a = *X; *X = b;
+
+ the CPU will only issue the following sequence of memory operations:
+
+ a = LOAD *X, STORE *X = b
+
+ And for:
+
+ *X = c; d = *X;
+
+ the CPU will only issue:
+
+ STORE *X = c, d = LOAD *X
+
+ (Loads and stores overlap if they are targetted at overlapping pieces of
+ memory).
+
+And there are a number of things that _must_ or _must_not_ be assumed:
+
+ (*) It _must_not_ be assumed that independent loads and stores will be issued
+ in the order given. This means that for:
+
+ X = *A; Y = *B; *D = Z;
+
+ we may get any of the following sequences:
+
+ X = LOAD *A, Y = LOAD *B, STORE *D = Z
+ X = LOAD *A, STORE *D = Z, Y = LOAD *B
+ Y = LOAD *B, X = LOAD *A, STORE *D = Z
+ Y = LOAD *B, STORE *D = Z, X = LOAD *A
+ STORE *D = Z, X = LOAD *A, Y = LOAD *B
+ STORE *D = Z, Y = LOAD *B, X = LOAD *A
+
+ (*) It _must_ be assumed that overlapping memory accesses may be merged or
+ discarded. This means that for:
+
+ X = *A; Y = *(A + 4);
+
+ we may get any one of the following sequences:
+
+ X = LOAD *A; Y = LOAD *(A + 4);
+ Y = LOAD *(A + 4); X = LOAD *A;
+ {X, Y} = LOAD {*A, *(A + 4) };
+
+ And for:
+
+ *A = X; Y = *A;
+
+ we may get either of:
+
+ STORE *A = X; Y = LOAD *A;
+ STORE *A = Y;
+
+
+=========================
+WHAT ARE MEMORY BARRIERS?
+=========================
+
+As can be seen above, independent memory operations are effectively performed
+in random order, but this can be a problem for CPU-CPU interaction and for I/O.
+What is required is some way of intervening to instruct the compiler and the
+CPU to restrict the order.
+
+Memory barriers are such interventions. They impose a perceived partial
+ordering between the memory operations specified on either side of the barrier.
+They request that the sequence of memory events generated appears to other
+parts of the system as if the barrier is effective on that CPU.
+
+
+VARIETIES OF MEMORY BARRIER
+---------------------------
+
+Memory barriers come in four basic varieties:
+
+ (1) Write (or store) memory barriers.
+
+ A write memory barrier gives a guarantee that all the STORE operations
+ specified before the barrier will appear to happen before all the STORE
+ operations specified after the barrier with respect to the other
+ components of the system.
+
+ A write barrier is a partial ordering on stores only; it is not required
+ to have any effect on loads.
+
+ A CPU can be viewed as as commiting a sequence of store operations to the
+ memory system as time progresses. All stores before a write barrier will
+ occur in the sequence _before_ all the stores after the write barrier.
+
+ [!] Note that write barriers should normally be paired with read or data
+ dependency barriers; see the "SMP barrier pairing" subsection.
+
+
+ (2) Data dependency barriers.
+
+ A data dependency barrier is a weaker form of read barrier. In the case
+ where two loads are performed such that the second depends on the result
+ of the first (eg: the first load retrieves the address to which the second
+ load will be directed), a data dependency barrier would be required to
+ make sure that the target of the second load is updated before the address
+ obtained by the first load is accessed.
+
+ A data dependency barrier is a partial ordering on interdependent loads
+ only; it is not required to have any effect on stores, independent loads
+ or overlapping loads.
+
+ As mentioned in (1), the other CPUs in the system can be viewed as
+ committing sequences of stores to the memory system that the CPU being
+ considered can then perceive. A data dependency barrier issued by the CPU
+ under consideration guarantees that for any load preceding it, if that
+ load touches one of a sequence of stores from another CPU, then by the
+ time the barrier completes, the effects of all the stores prior to that
+ touched by the load will be perceptible to any loads issued after the data
+ dependency barrier.
+
+ See the "Examples of memory barrier sequences" subsection for diagrams
+ showing the ordering constraints.
+
+ [!] Note that the first load really has to have a _data_ dependency and
+ not a control dependency. If the address for the second load is dependent
+ on the first load, but the dependency is through a conditional rather than
+ actually loading the address itself, then it's a _control_ dependency and
+ a full read barrier or better is required. See the "Control dependencies"
+ subsection for more information.
+
+ [!] Note that data dependency barriers should normally be paired with
+ write barriers; see the "SMP barrier pairing" subsection.
+
+
+ (3) Read (or load) memory barriers.
+
+ A read barrier is a data dependency barrier plus a guarantee that all the
+ LOAD operations specified before the barrier will appear to happen before
+ all the LOAD operations specified after the barrier with respect to the
+ other components of the system.
+
+ A read barrier is a partial ordering on loads only; it is not required to
+ have any effect on stores.
+
+ Read memory barriers imply data dependency barriers, and so can substitute
+ for them.
+
+ [!] Note that read barriers should normally be paired with write barriers;
+ see the "SMP barrier pairing" subsection.
+
+
+ (4) General memory barriers.
+
+ A general memory barrier is a combination of both a read memory barrier
+ and a write memory barrier. It is a partial ordering over both loads and
+ stores.
+
+ General memory barriers imply both read and write memory barriers, and so
+ can substitute for either.
+
+
+And a couple of implicit varieties:
+
+ (5) LOCK operations.
+
+ This acts as a one-way permeable barrier. It guarantees that all memory
+ operations after the LOCK operation will appear to happen after the LOCK
+ operation with respect to the other components of the system.
+
+ Memory operations that occur before a LOCK operation may appear to happen
+ after it completes.
+
+ A LOCK operation should almost always be paired with an UNLOCK operation.
+
+
+ (6) UNLOCK operations.
+
+ This also acts as a one-way permeable barrier. It guarantees that all
+ memory operations before the UNLOCK operation will appear to happen before
+ the UNLOCK operation with respect to the other components of the system.
+
+ Memory operations that occur after an UNLOCK operation may appear to
+ happen before it completes.
+
+ LOCK and UNLOCK operations are guaranteed to appear with respect to each
+ other strictly in the order specified.
+
+ The use of LOCK and UNLOCK operations generally precludes the need for
+ other sorts of memory barrier (but note the exceptions mentioned in the
+ subsection "MMIO write barrier").
+
+
+Memory barriers are only required where there's a possibility of interaction
+between two CPUs or between a CPU and a device. If it can be guaranteed that
+there won't be any such interaction in any particular piece of code, then
+memory barriers are unnecessary in that piece of code.
+
+
+Note that these are the _minimum_ guarantees. Different architectures may give
+more substantial guarantees, but they may _not_ be relied upon outside of arch
+specific code.
+
+
+WHAT MAY NOT BE ASSUMED ABOUT MEMORY BARRIERS?
+----------------------------------------------
+
+There are certain things that the Linux kernel memory barriers do not guarantee:
+
+ (*) There is no guarantee that any of the memory accesses specified before a
+ memory barrier will be _complete_ by the completion of a memory barrier
+ instruction; the barrier can be considered to draw a line in that CPU's
+ access queue that accesses of the appropriate type may not cross.
+
+ (*) There is no guarantee that issuing a memory barrier on one CPU will have
+ any direct effect on another CPU or any other hardware in the system. The
+ indirect effect will be the order in which the second CPU sees the effects
+ of the first CPU's accesses occur, but see the next point:
+
+ (*) There is no guarantee that the a CPU will see the correct order of effects
+ from a second CPU's accesses, even _if_ the second CPU uses a memory
+ barrier, unless the first CPU _also_ uses a matching memory barrier (see
+ the subsection on "SMP Barrier Pairing").
+
+ (*) There is no guarantee that some intervening piece of off-the-CPU
+ hardware[*] will not reorder the memory accesses. CPU cache coherency
+ mechanisms should propagate the indirect effects of a memory barrier
+ between CPUs, but might not do so in order.
+
+ [*] For information on bus mastering DMA and coherency please read:
+
+ Documentation/pci.txt
+ Documentation/DMA-mapping.txt
+ Documentation/DMA-API.txt
+
+
+DATA DEPENDENCY BARRIERS
+------------------------
+
+The usage requirements of data dependency barriers are a little subtle, and
+it's not always obvious that they're needed. To illustrate, consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+ <write barrier>
+ P = &B
+ Q = P;
+ D = *Q;
+
+There's a clear data dependency here, and it would seem that by the end of the
+sequence, Q must be either &A or &B, and that:
+
+ (Q == &A) implies (D == 1)
+ (Q == &B) implies (D == 4)
+
+But! CPU 2's perception of P may be updated _before_ its perception of B, thus
+leading to the following situation:
+
+ (Q == &B) and (D == 2) ????
+
+Whilst this may seem like a failure of coherency or causality maintenance, it
+isn't, and this behaviour can be observed on certain real CPUs (such as the DEC
+Alpha).
+
+To deal with this, a data dependency barrier must be inserted between the
+address load and the data load:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+ <write barrier>
+ P = &B
+ Q = P;
+ <data dependency barrier>
+ D = *Q;
+
+This enforces the occurrence of one of the two implications, and prevents the
+third possibility from arising.
+
+[!] Note that this extremely counterintuitive situation arises most easily on
+machines with split caches, so that, for example, one cache bank processes
+even-numbered cache lines and the other bank processes odd-numbered cache
+lines. The pointer P might be stored in an odd-numbered cache line, and the
+variable B might be stored in an even-numbered cache line. Then, if the
+even-numbered bank of the reading CPU's cache is extremely busy while the
+odd-numbered bank is idle, one can see the new value of the pointer P (&B),
+but the old value of the variable B (1).
+
+
+Another example of where data dependency barriers might by required is where a
+number is read from memory and then used to calculate the index for an array
+access:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
+ M[1] = 4;
+ <write barrier>
+ P = 1
+ Q = P;
+ <data dependency barrier>
+ D = M[Q];
+
+
+The data dependency barrier is very important to the RCU system, for example.
+See rcu_dereference() in include/linux/rcupdate.h. This permits the current
+target of an RCU'd pointer to be replaced with a new modified target, without
+the replacement target appearing to be incompletely initialised.
+
+See also the subsection on "Cache Coherency" for a more thorough example.
+
+
+CONTROL DEPENDENCIES
+--------------------
+
+A control dependency requires a full read memory barrier, not simply a data
+dependency barrier to make it work correctly. Consider the following bit of
+code:
+
+ q = &a;
+ if (p)
+ q = &b;
+ <data dependency barrier>
+ x = *q;
+
+This will not have the desired effect because there is no actual data
+dependency, but rather a control dependency that the CPU may short-circuit by
+attempting to predict the outcome in advance. In such a case what's actually
+required is:
+
+ q = &a;
+ if (p)
+ q = &b;
+ <read barrier>
+ x = *q;
+
+
+SMP BARRIER PAIRING
+-------------------
+
+When dealing with CPU-CPU interactions, certain types of memory barrier should
+always be paired. A lack of appropriate pairing is almost certainly an error.
+
+A write barrier should always be paired with a data dependency barrier or read
+barrier, though a general barrier would also be viable. Similarly a read
+barrier or a data dependency barrier should always be paired with at least an
+write barrier, though, again, a general barrier is viable:
+
+ CPU 1 CPU 2
+ =============== ===============
+ a = 1;
+ <write barrier>
+ b = 2; x = a;
+ <read barrier>
+ y = b;
+
+Or:
+
+ CPU 1 CPU 2
+ =============== ===============================
+ a = 1;
+ <write barrier>
+ b = &a; x = b;
+ <data dependency barrier>
+ y = *x;
+
+Basically, the read barrier always has to be there, even though it can be of
+the "weaker" type.
+
+
+EXAMPLES OF MEMORY BARRIER SEQUENCES
+------------------------------------
+
+Firstly, write barriers act as a partial orderings on store operations.
+Consider the following sequence of events:
+
+ CPU 1
+ =======================
+ STORE A = 1
+ STORE B = 2
+ STORE C = 3
+ <write barrier>
+ STORE D = 4
+ STORE E = 5
+
+This sequence of events is committed to the memory coherence system in an order
+that the rest of the system might perceive as the unordered set of { STORE A,
+STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+}:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | } /\
+ | | : +------+ }----- \ -----> Events perceptible
+ | | : | A=1 | } \/ to rest of system
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }
+ | | +------+ }
+ | | wwwwwwwwwwwwwwww } <--- At this point the write barrier
+ | | +------+ } requires all stores prior to the
+ | | : | E=5 | } barrier to be committed before
+ | | : +------+ } further stores may be take place.
+ | |------>| D=4 | }
+ | | +------+
+ +-------+ : :
+ |
+ | Sequence in which stores committed to memory system
+ | by CPU 1
+ V
+
+
+Secondly, data dependency barriers act as a partial orderings on data-dependent
+loads. Consider the following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A = 1
+ STORE B = 2
+ <write barrier>
+ STORE C = &B LOAD X
+ STORE D = 4 LOAD C (gets &B)
+ LOAD *C (reads B)
+
+Without intervention, CPU 2 may perceive the events on CPU 1 in some
+effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : : : :
+ | | +------+ +-------+ | Sequence of update
+ | |------>| B=2 |----- --->| Y->8 | | of perception on
+ | | : +------+ \ +-------+ | CPU 2
+ | CPU 1 | : | A=1 | \ --->| C->&Y | V
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ Apparently incorrect ---> | | B->7 |------>| |
+ perception of B (!) | +-------+ | |
+ | : : | |
+ | +-------+ | |
+ The load of X holds ---> \ | X->9 |------>| |
+ up the maintenance \ +-------+ | |
+ of coherence of B ----->| B->2 | +-------+
+ +-------+
+ : :
+
+
+In the above example, CPU 2 perceives that B is 7, despite the load of *C
+(which would be B) coming after the the LOAD of C.
+
+If, however, a data dependency barrier were to be placed between the load of C
+and the load of *C (ie: B) on CPU 2, then the following will occur:
+
+ +-------+ : : : :
+ | | +------+ +-------+
+ | |------>| B=2 |----- --->| Y->8 |
+ | | : +------+ \ +-------+
+ | CPU 1 | : | A=1 | \ --->| C->&Y |
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ \ | X->9 |------>| |
+ \ +-------+ | |
+ ----->| B->2 | | |
+ +-------+ | |
+ Makes sure all effects ---> ddddddddddddddddd | |
+ prior to the store of C +-------+ | |
+ are perceptible to | B->2 |------>| |
+ successive loads +-------+ | |
+ : : +-------+
+
+
+And thirdly, a read barrier acts as a partial order on loads. Consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A=1
+ STORE B=2
+ STORE C=3
+ <write barrier>
+ STORE D=4
+ STORE E=5
+ LOAD A
+ LOAD B
+ LOAD C
+ LOAD D
+ LOAD E
+
+Without intervention, CPU 2 may then choose to perceive the events on CPU 1 in
+some effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }---
+ | | +------+ } \
+ | | wwwwwwwwwwwww} \
+ | | +------+ } \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ } \ { | C->3 |------>| |
+ | |------>| D=4 | } \ { +-------+ : | |
+ | | +------+ \ { | E->5 | : | |
+ +-------+ : : \ { +-------+ : | |
+ Transfer -->{ | A->1 | : | CPU 2 |
+ from CPU 1 { +-------+ : | |
+ to CPU 2 { | D->4 | : | |
+ { +-------+ : | |
+ { | B->2 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+If, however, a read barrier were to be placed between the load of C and the
+load of D on CPU 2, then the partial ordering imposed by CPU 1 will be
+perceived correctly by CPU 2.
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }---
+ | | : +------+ } \
+ | CPU 1 | : | B=2 | } \
+ | | +------+ \
+ | | wwwwwwwwwwwwwwww \
+ | | +------+ \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ }--- \ { | C->3 |------>| |
+ | |------>| D=4 | } \ \ { +-------+ : | |
+ | | +------+ \ -->{ | B->2 | : | |
+ +-------+ : : \ { +-------+ : | |
+ \ { | A->1 | : | CPU 2 |
+ \ +-------+ | |
+ At this point the read ----> \ rrrrrrrrrrrrrrrrr | |
+ barrier causes all effects \ +-------+ | |
+ prior to the storage of C \ { | E->5 | : | |
+ to be perceptible to CPU 2 -->{ +-------+ : | |
+ { | D->4 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+========================
+EXPLICIT KERNEL BARRIERS
+========================
+
+The Linux kernel has a variety of different barriers that act at different
+levels:
+
+ (*) Compiler barrier.
+
+ (*) CPU memory barriers.
+
+ (*) MMIO write barrier.
+
+
+COMPILER BARRIER
+----------------
+
+The Linux kernel has an explicit compiler barrier function that prevents the
+compiler from moving the memory accesses either side of it to the other side:
+
+ barrier();
+
+This a general barrier - lesser varieties of compiler barrier do not exist.
+
+The compiler barrier has no direct effect on the CPU, which may then reorder
+things however it wishes.
+
+
+CPU MEMORY BARRIERS
+-------------------
+
+The Linux kernel has eight basic CPU memory barriers:
+
+ TYPE MANDATORY SMP CONDITIONAL
+ =============== ======================= ===========================
+ GENERAL mb() smp_mb()
+ WRITE wmb() smp_wmb()
+ READ rmb() smp_rmb()
+ DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
+
+
+All CPU memory barriers unconditionally imply compiler barriers.
+
+SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
+systems because it is assumed that a CPU will be appear to be self-consistent,
+and will order overlapping accesses correctly with respect to itself.
+
+[!] Note that SMP memory barriers _must_ be used to control the ordering of
+references to shared memory on SMP systems, though the use of locking instead
+is sufficient.
+
+Mandatory barriers should not be used to control SMP effects, since mandatory
+barriers unnecessarily impose overhead on UP systems. They may, however, be
+used to control MMIO effects on accesses through relaxed memory I/O windows.
+These are required even on non-SMP systems as they affect the order in which
+memory operations appear to a device by prohibiting both the compiler and the
+CPU from reordering them.
+
+
+There are some more advanced barrier functions:
+
+ (*) set_mb(var, value)
+ (*) set_wmb(var, value)
+
+ These assign the value to the variable and then insert at least a write
+ barrier after it, depending on the function. They aren't guaranteed to
+ insert anything more than a compiler barrier in a UP compilation.
+
+
+ (*) smp_mb__before_atomic_dec();
+ (*) smp_mb__after_atomic_dec();
+ (*) smp_mb__before_atomic_inc();
+ (*) smp_mb__after_atomic_inc();
+
+ These are for use with atomic add, subtract, increment and decrement
+ functions, especially when used for reference counting. These functions
+ do not imply memory barriers.
+
+ As an example, consider a piece of code that marks an object as being dead
+ and then decrements the object's reference count:
+
+ obj->dead = 1;
+ smp_mb__before_atomic_dec();
+ atomic_dec(&obj->ref_count);
+
+ This makes sure that the death mark on the object is perceived to be set
+ *before* the reference counter is decremented.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+ (*) smp_mb__before_clear_bit(void);
+ (*) smp_mb__after_clear_bit(void);
+
+ These are for use similar to the atomic inc/dec barriers. These are
+ typically used for bitwise unlocking operations, so care must be taken as
+ there are no implicit memory barriers here either.
+
+ Consider implementing an unlock operation of some nature by clearing a
+ locking bit. The clear_bit() would then need to be barriered like this:
+
+ smp_mb__before_clear_bit();
+ clear_bit( ... );
+
+ This prevents memory operations before the clear leaking to after it. See
+ the subsection on "Locking Functions" with reference to UNLOCK operation
+ implications.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+MMIO WRITE BARRIER
+------------------
+
+The Linux kernel also has a special barrier for use with memory-mapped I/O
+writes:
+
+ mmiowb();
+
+This is a variation on the mandatory write barrier that causes writes to weakly
+ordered I/O regions to be partially ordered. Its effects may go beyond the
+CPU->Hardware interface and actually affect the hardware at some level.
+
+See the subsection "Locks vs I/O accesses" for more information.
+
+
+===============================
+IMPLICIT KERNEL MEMORY BARRIERS
+===============================
+
+Some of the other functions in the linux kernel imply memory barriers, amongst
+which are locking, scheduling and memory allocation functions.
+
+This specification is a _minimum_ guarantee; any particular architecture may
+provide more substantial guarantees, but these may not be relied upon outside
+of arch specific code.
+
+
+LOCKING FUNCTIONS
+-----------------
+
+The Linux kernel has a number of locking constructs:
+
+ (*) spin locks
+ (*) R/W spin locks
+ (*) mutexes
+ (*) semaphores
+ (*) R/W semaphores
+ (*) RCU
+
+In all cases there are variants on "LOCK" operations and "UNLOCK" operations
+for each construct. These operations all imply certain barriers:
+
+ (1) LOCK operation implication:
+
+ Memory operations issued after the LOCK will be completed after the LOCK
+ operation has completed.
+
+ Memory operations issued before the LOCK may be completed after the LOCK
+ operation has completed.
+
+ (2) UNLOCK operation implication:
+
+ Memory operations issued before the UNLOCK will be completed before the
+ UNLOCK operation has completed.
+
+ Memory operations issued after the UNLOCK may be completed before the
+ UNLOCK operation has completed.
+
+ (3) LOCK vs LOCK implication:
+
+ All LOCK operations issued before another LOCK operation will be completed
+ before that LOCK operation.
+
+ (4) LOCK vs UNLOCK implication:
+
+ All LOCK operations issued before an UNLOCK operation will be completed
+ before the UNLOCK operation.
+
+ All UNLOCK operations issued before a LOCK operation will be completed
+ before the LOCK operation.
+
+ (5) Failed conditional LOCK implication:
+
+ Certain variants of the LOCK operation may fail, either due to being
+ unable to get the lock immediately, or due to receiving an unblocked
+ signal whilst asleep waiting for the lock to become available. Failed
+ locks do not imply any sort of barrier.
+
+Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is
+equivalent to a full barrier, but a LOCK followed by an UNLOCK is not.
+
+[!] Note: one of the consequence of LOCKs and UNLOCKs being only one-way
+ barriers is that the effects instructions outside of a critical section may
+ seep into the inside of the critical section.
+
+Locks and semaphores may not provide any guarantee of ordering on UP compiled
+systems, and so cannot be counted on in such a situation to actually achieve
+anything at all - especially with respect to I/O accesses - unless combined
+with interrupt disabling operations.
+
+See also the section on "Inter-CPU locking barrier effects".
+
+
+As an example, consider the following:
+
+ *A = a;
+ *B = b;
+ LOCK
+ *C = c;
+ *D = d;
+ UNLOCK
+ *E = e;
+ *F = f;
+
+The following sequence of events is acceptable:
+
+ LOCK, {*F,*A}, *E, {*C,*D}, *B, UNLOCK
+
+ [+] Note that {*F,*A} indicates a combined access.
+
+But none of the following are:
+
+ {*F,*A}, *B, LOCK, *C, *D, UNLOCK, *E
+ *A, *B, *C, LOCK, *D, UNLOCK, *E, *F
+ *A, *B, LOCK, *C, UNLOCK, *D, *E, *F
+ *B, LOCK, *C, *D, UNLOCK, {*F,*A}, *E
+
+
+
+INTERRUPT DISABLING FUNCTIONS
+-----------------------------
+
+Functions that disable interrupts (LOCK equivalent) and enable interrupts
+(UNLOCK equivalent) will act as compiler barriers only. So if memory or I/O
+barriers are required in such a situation, they must be provided from some
+other means.
+
+
+MISCELLANEOUS FUNCTIONS
+-----------------------
+
+Other functions that imply barriers:
+
+ (*) schedule() and similar imply full memory barriers.
+
+ (*) Memory allocation and release functions imply full memory barriers.
+
+
+=================================
+INTER-CPU LOCKING BARRIER EFFECTS
+=================================
+
+On SMP systems locking primitives give a more substantial form of barrier: one
+that does affect memory access ordering on other CPUs, within the context of
+conflict on any particular lock.
+
+
+LOCKS VS MEMORY ACCESSES
+------------------------
+
+Consider the following: the system has a pair of spinlocks (N) and (Q), and
+three CPUs; then should the following sequence of events occur:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a; *E = e;
+ LOCK M LOCK Q
+ *B = b; *F = f;
+ *C = c; *G = g;
+ UNLOCK M UNLOCK Q
+ *D = d; *H = h;
+
+Then there is no guarantee as to what order CPU #3 will see the accesses to *A
+through *H occur in, other than the constraints imposed by the separate locks
+on the separate CPUs. It might, for example, see:
+
+ *E, LOCK M, LOCK Q, *G, *C, *F, *A, *B, UNLOCK Q, *D, *H, UNLOCK M
+
+But it won't see any of:
+
+ *B, *C or *D preceding LOCK M
+ *A, *B or *C following UNLOCK M
+ *F, *G or *H preceding LOCK Q
+ *E, *F or *G following UNLOCK Q
+
+
+However, if the following occurs:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a;
+ LOCK M [1]
+ *B = b;
+ *C = c;
+ UNLOCK M [1]
+ *D = d; *E = e;
+ LOCK M [2]
+ *F = f;
+ *G = g;
+ UNLOCK M [2]
+ *H = h;
+
+CPU #3 might see:
+
+ *E, LOCK M [1], *C, *B, *A, UNLOCK M [1],
+ LOCK M [2], *H, *F, *G, UNLOCK M [2], *D
+
+But assuming CPU #1 gets the lock first, it won't see any of:
+
+ *B, *C, *D, *F, *G or *H preceding LOCK M [1]
+ *A, *B or *C following UNLOCK M [1]
+ *F, *G or *H preceding LOCK M [2]
+ *A, *B, *C, *E, *F or *G following UNLOCK M [2]
+
+
+LOCKS VS I/O ACCESSES
+---------------------
+
+Under certain circumstances (especially involving NUMA), I/O accesses within
+two spinlocked sections on two different CPUs may be seen as interleaved by the
+PCI bridge, because the PCI bridge does not necessarily participate in the
+cache-coherence protocol, and is therefore incapable of issuing the required
+read memory barriers.
+
+For example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ spin_unlock(Q);
+
+may be seen by the PCI bridge as follows:
+
+ STORE *ADDR = 0, STORE *ADDR = 4, STORE *DATA = 1, STORE *DATA = 5
+
+which would probably cause the hardware to malfunction.
+
+
+What is necessary here is to intervene with an mmiowb() before dropping the
+spinlock, for example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ mmiowb();
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ mmiowb();
+ spin_unlock(Q);
+
+this will ensure that the two stores issued on CPU #1 appear at the PCI bridge
+before either of the stores issued on CPU #2.
+
+
+Furthermore, following a store by a load to the same device obviates the need
+for an mmiowb(), because the load forces the store to complete before the load
+is performed:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ a = readl(DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ b = readl(DATA);
+ spin_unlock(Q);
+
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+=================================
+WHERE ARE MEMORY BARRIERS NEEDED?
+=================================
+
+Under normal operation, memory operation reordering is generally not going to
+be a problem as a single-threaded linear piece of code will still appear to
+work correctly, even if it's in an SMP kernel. There are, however, three
+circumstances in which reordering definitely _could_ be a problem:
+
+ (*) Interprocessor interaction.
+
+ (*) Atomic operations.
+
+ (*) Accessing devices (I/O).
+
+ (*) Interrupts.
+
+
+INTERPROCESSOR INTERACTION
+--------------------------
+
+When there's a system with more than one processor, more than one CPU in the
+system may be working on the same data set at the same time. This can cause
+synchronisation problems, and the usual way of dealing with them is to use
+locks. Locks, however, are quite expensive, and so it may be preferable to
+operate without the use of a lock if at all possible. In such a case
+operations that affect both CPUs may have to be carefully ordered to prevent
+a malfunction.
+
+Consider, for example, the R/W semaphore slow path. Here a waiting process is
+queued on the semaphore, by virtue of it having a piece of its stack linked to
+the semaphore's list of waiting processes:
+
+ struct rw_semaphore {
+ ...
+ spinlock_t lock;
+ struct list_head waiters;
+ };
+
+ struct rwsem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+ };
+
+To wake up a particular waiter, the up_read() or up_write() functions have to:
+
+ (1) read the next pointer from this waiter's record to know as to where the
+ next waiter record is;
+
+ (4) read the pointer to the waiter's task structure;
+
+ (3) clear the task pointer to tell the waiter it has been given the semaphore;
+
+ (4) call wake_up_process() on the task; and
+
+ (5) release the reference held on the waiter's task struct.
+
+In otherwords, it has to perform this sequence of events:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+and if any of these steps occur out of order, then the whole thing may
+malfunction.
+
+Once it has queued itself and dropped the semaphore lock, the waiter does not
+get the lock again; it instead just waits for its task pointer to be cleared
+before proceeding. Since the record is on the waiter's stack, this means that
+if the task pointer is cleared _before_ the next pointer in the list is read,
+another CPU might start processing the waiter and might clobber the waiter's
+stack before the up*() function has a chance to read the next pointer.
+
+Consider then what might happen to the above sequence of events:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ down_xxx()
+ Queue waiter
+ Sleep
+ up_yyy()
+ LOAD waiter->task;
+ STORE waiter->task;
+ Woken up by other event
+ <preempt>
+ Resume processing
+ down_xxx() returns
+ call foo()
+ foo() clobbers *waiter
+ </preempt>
+ LOAD waiter->list.next;
+ --- OOPS ---
+
+This could be dealt with using the semaphore lock, but then the down_xxx()
+function has to needlessly get the spinlock again after being woken up.
+
+The way to deal with this is to insert a general SMP memory barrier:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ smp_mb();
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+In this case, the barrier makes a guarantee that all memory accesses before the
+barrier will appear to happen before all the memory accesses after the barrier
+with respect to the other CPUs on the system. It does _not_ guarantee that all
+the memory accesses before the barrier will be complete by the time the barrier
+instruction itself is complete.
+
+On a UP system - where this wouldn't be a problem - the smp_mb() is just a
+compiler barrier, thus making sure the compiler emits the instructions in the
+right order without actually intervening in the CPU. Since there there's only
+one CPU, that CPU's dependency ordering logic will take care of everything
+else.
+
+
+ATOMIC OPERATIONS
+-----------------
+
+Though they are technically interprocessor interaction considerations, atomic
+operations are noted specially as they do _not_ generally imply memory
+barriers. The possible offenders include:
+
+ xchg();
+ cmpxchg();
+ test_and_set_bit();
+ test_and_clear_bit();
+ test_and_change_bit();
+ atomic_cmpxchg();
+ atomic_inc_return();
+ atomic_dec_return();
+ atomic_add_return();
+ atomic_sub_return();
+ atomic_inc_and_test();
+ atomic_dec_and_test();
+ atomic_sub_and_test();
+ atomic_add_negative();
+ atomic_add_unless();
+
+These may be used for such things as implementing LOCK operations or controlling
+the lifetime of objects by decreasing their reference counts. In such cases
+they need preceding memory barriers.
+
+The following may also be possible offenders as they may be used as UNLOCK
+operations.
+
+ set_bit();
+ clear_bit();
+ change_bit();
+ atomic_set();
+
+
+The following are a little tricky:
+
+ atomic_add();
+ atomic_sub();
+ atomic_inc();
+ atomic_dec();
+
+If they're used for statistics generation, then they probably don't need memory
+barriers, unless there's a coupling between statistical data.
+
+If they're used for reference counting on an object to control its lifetime,
+they probably don't need memory barriers because either the reference count
+will be adjusted inside a locked section, or the caller will already hold
+sufficient references to make the lock, and thus a memory barrier unnecessary.
+
+If they're used for constructing a lock of some description, then they probably
+do need memory barriers as a lock primitive generally has to do things in a
+specific order.
+
+
+Basically, each usage case has to be carefully considered as to whether memory
+barriers are needed or not. The simplest rule is probably: if the atomic
+operation is protected by a lock, then it does not require a barrier unless
+there's another operation within the critical section with respect to which an
+ordering must be maintained.
+
+See Documentation/atomic_ops.txt for more information.
+
+
+ACCESSING DEVICES
+-----------------
+
+Many devices can be memory mapped, and so appear to the CPU as if they're just
+a set of memory locations. To control such a device, the driver usually has to
+make the right memory accesses in exactly the right order.
+
+However, having a clever CPU or a clever compiler creates a potential problem
+in that the carefully sequenced accesses in the driver code won't reach the
+device in the requisite order if the CPU or the compiler thinks it is more
+efficient to reorder, combine or merge accesses - something that would cause
+the device to malfunction.
+
+Inside of the Linux kernel, I/O should be done through the appropriate accessor
+routines - such as inb() or writel() - which know how to make such accesses
+appropriately sequential. Whilst this, for the most part, renders the explicit
+use of memory barriers unnecessary, there are a couple of situations where they
+might be needed:
+
+ (1) On some systems, I/O stores are not strongly ordered across all CPUs, and
+ so for _all_ general drivers locks should be used and mmiowb() must be
+ issued prior to unlocking the critical section.
+
+ (2) If the accessor functions are used to refer to an I/O memory window with
+ relaxed memory access properties, then _mandatory_ memory barriers are
+ required to enforce ordering.
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+INTERRUPTS
+----------
+
+A driver may be interrupted by its own interrupt service routine, and thus the
+two parts of the driver may interfere with each other's attempts to control or
+access the device.
+
+This may be alleviated - at least in part - by disabling local interrupts (a
+form of locking), such that the critical operations are all contained within
+the interrupt-disabled section in the driver. Whilst the driver's interrupt
+routine is executing, the driver's core may not run on the same CPU, and its
+interrupt is not permitted to happen again until the current interrupt has been
+handled, thus the interrupt handler does not need to lock against that.
+
+However, consider a driver that was talking to an ethernet card that sports an
+address register and a data register. If that driver's core talks to the card
+under interrupt-disablement and then the driver's interrupt handler is invoked:
+
+ LOCAL IRQ DISABLE
+ writew(ADDR, 3);
+ writew(DATA, y);
+ LOCAL IRQ ENABLE
+ <interrupt>
+ writew(ADDR, 4);
+ q = readw(DATA);
+ </interrupt>
+
+The store to the data register might happen after the second store to the
+address register if ordering rules are sufficiently relaxed:
+
+ STORE *ADDR = 3, STORE *ADDR = 4, STORE *DATA = y, q = LOAD *DATA
+
+
+If ordering rules are relaxed, it must be assumed that accesses done inside an
+interrupt disabled section may leak outside of it and may interleave with
+accesses performed in an interrupt - and vice versa - unless implicit or
+explicit barriers are used.
+
+Normally this won't be a problem because the I/O accesses done inside such
+sections will include synchronous load operations on strictly ordered I/O
+registers that form implicit I/O barriers. If this isn't sufficient then an
+mmiowb() may need to be used explicitly.
+
+
+A similar situation may occur between an interrupt routine and two routines
+running on separate CPUs that communicate with each other. If such a case is
+likely, then interrupt-disabling locks should be used to guarantee ordering.
+
+
+==========================
+KERNEL I/O BARRIER EFFECTS
+==========================
+
+When accessing I/O memory, drivers should use the appropriate accessor
+functions:
+
+ (*) inX(), outX():
+
+ These are intended to talk to I/O space rather than memory space, but
+ that's primarily a CPU-specific concept. The i386 and x86_64 processors do
+ indeed have special I/O space access cycles and instructions, but many
+ CPUs don't have such a concept.
+
+ The PCI bus, amongst others, defines an I/O space concept - which on such
+ CPUs as i386 and x86_64 cpus readily maps to the CPU's concept of I/O
+ space. However, it may also mapped as a virtual I/O space in the CPU's
+ memory map, particularly on those CPUs that don't support alternate
+ I/O spaces.
+
+ Accesses to this space may be fully synchronous (as on i386), but
+ intermediary bridges (such as the PCI host bridge) may not fully honour
+ that.
+
+ They are guaranteed to be fully ordered with respect to each other.
+
+ They are not guaranteed to be fully ordered with respect to other types of
+ memory and I/O operation.
+
+ (*) readX(), writeX():
+
+ Whether these are guaranteed to be fully ordered and uncombined with
+ respect to each other on the issuing CPU depends on the characteristics
+ defined for the memory window through which they're accessing. On later
+ i386 architecture machines, for example, this is controlled by way of the
+ MTRR registers.
+
+ Ordinarily, these will be guaranteed to be fully ordered and uncombined,,
+ provided they're not accessing a prefetchable device.
+
+ However, intermediary hardware (such as a PCI bridge) may indulge in
+ deferral if it so wishes; to flush a store, a load from the same location
+ is preferred[*], but a load from the same device or from configuration
+ space should suffice for PCI.
+
+ [*] NOTE! attempting to load from the same location as was written to may
+ cause a malfunction - consider the 16550 Rx/Tx serial registers for
+ example.
+
+ Used with prefetchable I/O memory, an mmiowb() barrier may be required to
+ force stores to be ordered.
+
+ Please refer to the PCI specification for more information on interactions
+ between PCI transactions.
+
+ (*) readX_relaxed()
+
+ These are similar to readX(), but are not guaranteed to be ordered in any
+ way. Be aware that there is no I/O read barrier available.
+
+ (*) ioreadX(), iowriteX()
+
+ These will perform as appropriate for the type of access they're actually
+ doing, be it inX()/outX() or readX()/writeX().
+
+
+========================================
+ASSUMED MINIMUM EXECUTION ORDERING MODEL
+========================================
+
+It has to be assumed that the conceptual CPU is weakly-ordered but that it will
+maintain the appearance of program causality with respect to itself. Some CPUs
+(such as i386 or x86_64) are more constrained than others (such as powerpc or
+frv), and so the most relaxed case (namely DEC Alpha) must be assumed outside
+of arch-specific code.
+
+This means that it must be considered that the CPU will execute its instruction
+stream in any order it feels like - or even in parallel - provided that if an
+instruction in the stream depends on the an earlier instruction, then that
+earlier instruction must be sufficiently complete[*] before the later
+instruction may proceed; in other words: provided that the appearance of
+causality is maintained.
+
+ [*] Some instructions have more than one effect - such as changing the
+ condition codes, changing registers or changing memory - and different
+ instructions may depend on different effects.
+
+A CPU may also discard any instruction sequence that winds up having no
+ultimate effect. For example, if two adjacent instructions both load an
+immediate value into the same register, the first may be discarded.
+
+
+Similarly, it has to be assumed that compiler might reorder the instruction
+stream in any way it sees fit, again provided the appearance of causality is
+maintained.
+
+
+============================
+THE EFFECTS OF THE CPU CACHE
+============================
+
+The way cached memory operations are perceived across the system is affected to
+a certain extent by the caches that lie between CPUs and memory, and by the
+memory coherence system that maintains the consistency of state in the system.
+
+As far as the way a CPU interacts with another part of the system through the
+caches goes, the memory system has to include the CPU's caches, and memory
+barriers for the most part act at the interface between the CPU and its cache
+(memory barriers logically act on the dotted line in the following diagram):
+
+ <--- CPU ---> : <----------- Memory ----------->
+ :
+ +--------+ +--------+ : +--------+ +-----------+
+ | | | | : | | | | +--------+
+ | CPU | | Memory | : | CPU | | | | |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | |--->| Memory |
+ | | | | : | | | | | |
+ +--------+ +--------+ : +--------+ | | | |
+ : | Cache | +--------+
+ : | Coherency |
+ : | Mechanism | +--------+
+ +--------+ +--------+ : +--------+ | | | |
+ | | | | : | | | | | |
+ | CPU | | Memory | : | CPU | | |--->| Device |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | | | |
+ | | | | : | | | | +--------+
+ +--------+ +--------+ : +--------+ +-----------+
+ :
+ :
+
+Although any particular load or store may not actually appear outside of the
+CPU that issued it since it may have been satisfied within the CPU's own cache,
+it will still appear as if the full memory access had taken place as far as the
+other CPUs are concerned since the cache coherency mechanisms will migrate the
+cacheline over to the accessing CPU and propagate the effects upon conflict.
+
+The CPU core may execute instructions in any order it deems fit, provided the
+expected program causality appears to be maintained. Some of the instructions
+generate load and store operations which then go into the queue of memory
+accesses to be performed. The core may place these in the queue in any order
+it wishes, and continue execution until it is forced to wait for an instruction
+to complete.
+
+What memory barriers are concerned with is controlling the order in which
+accesses cross from the CPU side of things to the memory side of things, and
+the order in which the effects are perceived to happen by the other observers
+in the system.
+
+[!] Memory barriers are _not_ needed within a given CPU, as CPUs always see
+their own loads and stores as if they had happened in program order.
+
+[!] MMIO or other device accesses may bypass the cache system. This depends on
+the properties of the memory window through which devices are accessed and/or
+the use of any special device communication instructions the CPU may have.
+
+
+CACHE COHERENCY
+---------------
+
+Life isn't quite as simple as it may appear above, however: for while the
+caches are expected to be coherent, there's no guarantee that that coherency
+will be ordered. This means that whilst changes made on one CPU will
+eventually become visible on all CPUs, there's no guarantee that they will
+become apparent in the same order on those other CPUs.
+
+
+Consider dealing with a system that has pair of CPUs (1 & 2), each of which has
+a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D):
+
+ :
+ : +--------+
+ : +---------+ | |
+ +--------+ : +--->| Cache A |<------->| |
+ | | : | +---------+ | |
+ | CPU 1 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache B |<------->| |
+ : +---------+ | |
+ : | Memory |
+ : +---------+ | System |
+ +--------+ : +--->| Cache C |<------->| |
+ | | : | +---------+ | |
+ | CPU 2 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache D |<------->| |
+ : +---------+ | |
+ : +--------+
+ :
+
+Imagine the system has the following properties:
+
+ (*) an odd-numbered cache line may be in cache A, cache C or it may still be
+ resident in memory;
+
+ (*) an even-numbered cache line may be in cache B, cache D or it may still be
+ resident in memory;
+
+ (*) whilst the CPU core is interrogating one cache, the other cache may be
+ making use of the bus to access the rest of the system - perhaps to
+ displace a dirty cacheline or to do a speculative load;
+
+ (*) each cache has a queue of operations that need to be applied to that cache
+ to maintain coherency with the rest of the system;
+
+ (*) the coherency queue is not flushed by normal loads to lines already
+ present in the cache, even though the contents of the queue may
+ potentially effect those loads.
+
+Imagine, then, that two writes are made on the first CPU, with a write barrier
+between them to guarantee that they will appear to reach that CPU's caches in
+the requisite order:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb(); Make sure change to v visible before
+ change to p
+ <A:modify v=2> v is now in cache A exclusively
+ p = &v;
+ <B:modify p=&v> p is now in cache B exclusively
+
+The write memory barrier forces the other CPUs in the system to perceive that
+the local CPU's caches have apparently been updated in the correct order. But
+now imagine that the second CPU that wants to read those values:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ ...
+ q = p;
+ x = *q;
+
+The above pair of reads may then fail to happen in expected order, as the
+cacheline holding p may get updated in one of the second CPU's caches whilst
+the update to the cacheline holding v is delayed in the other of the second
+CPU's caches by some other cache event:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+ <A:modify v=2> <C:busy>
+ <C:queue v=2>
+ p = &b; q = p;
+ <D:request p>
+ <B:modify p=&v> <D:commit p=&v>
+ <D:read p>
+ x = *q;
+ <C:read *q> Reads from v before v updated in cache
+ <C:unbusy>
+ <C:commit v=2>
+
+Basically, whilst both cachelines will be updated on CPU 2 eventually, there's
+no guarantee that, without intervention, the order of update will be the same
+as that committed on CPU 1.
+
+
+To intervene, we need to interpolate a data dependency barrier or a read
+barrier between the loads. This will force the cache to commit its coherency
+queue before processing any further requests:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+ <A:modify v=2> <C:busy>
+ <C:queue v=2>
+ p = &b; q = p;
+ <D:request p>
+ <B:modify p=&v> <D:commit p=&v>
+ <D:read p>
+ smp_read_barrier_depends()
+ <C:unbusy>
+ <C:commit v=2>
+ x = *q;
+ <C:read *q> Reads from v after v updated in cache
+
+
+This sort of problem can be encountered on DEC Alpha processors as they have a
+split cache that improves performance by making better use of the data bus.
+Whilst most CPUs do imply a data dependency barrier on the read when a memory
+access depends on a read, not all do, so it may not be relied on.
+
+Other CPUs may also have split caches, but must coordinate between the various
+cachelets for normal memory accesss. The semantics of the Alpha removes the
+need for coordination in absence of memory barriers.
+
+
+CACHE COHERENCY VS DMA
+----------------------
+
+Not all systems maintain cache coherency with respect to devices doing DMA. In
+such cases, a device attempting DMA may obtain stale data from RAM because
+dirty cache lines may be resident in the caches of various CPUs, and may not
+have been written back to RAM yet. To deal with this, the appropriate part of
+the kernel must flush the overlapping bits of cache on each CPU (and maybe
+invalidate them as well).
+
+In addition, the data DMA'd to RAM by a device may be overwritten by dirty
+cache lines being written back to RAM from a CPU's cache after the device has
+installed its own data, or cache lines simply present in a CPUs cache may
+simply obscure the fact that RAM has been updated, until at such time as the
+cacheline is discarded from the CPU's cache and reloaded. To deal with this,
+the appropriate part of the kernel must invalidate the overlapping bits of the
+cache on each CPU.
+
+See Documentation/cachetlb.txt for more information on cache management.
+
+
+CACHE COHERENCY VS MMIO
+-----------------------
+
+Memory mapped I/O usually takes place through memory locations that are part of
+a window in the CPU's memory space that have different properties assigned than
+the usual RAM directed window.
+
+Amongst these properties is usually the fact that such accesses bypass the
+caching entirely and go directly to the device buses. This means MMIO accesses
+may, in effect, overtake accesses to cached memory that were emitted earlier.
+A memory barrier isn't sufficient in such a case, but rather the cache must be
+flushed between the cached memory write and the MMIO access if the two are in
+any way dependent.
+
+
+=========================
+THE THINGS CPUS GET UP TO
+=========================
+
+A programmer might take it for granted that the CPU will perform memory
+operations in exactly the order specified, so that if a CPU is, for example,
+given the following piece of code to execute:
+
+ a = *A;
+ *B = b;
+ c = *C;
+ d = *D;
+ *E = e;
+
+They would then expect that the CPU will complete the memory operation for each
+instruction before moving on to the next one, leading to a definite sequence of
+operations as seen by external observers in the system:
+
+ LOAD *A, STORE *B, LOAD *C, LOAD *D, STORE *E.
+
+
+Reality is, of course, much messier. With many CPUs and compilers, the above
+assumption doesn't hold because:
+
+ (*) loads are more likely to need to be completed immediately to permit
+ execution progress, whereas stores can often be deferred without a
+ problem;
+
+ (*) loads may be done speculatively, and the result discarded should it prove
+ to have been unnecessary;
+
+ (*) loads may be done speculatively, leading to the result having being
+ fetched at the wrong time in the expected sequence of events;
+
+ (*) the order of the memory accesses may be rearranged to promote better use
+ of the CPU buses and caches;
+
+ (*) loads and stores may be combined to improve performance when talking to
+ memory or I/O hardware that can do batched accesses of adjacent locations,
+ thus cutting down on transaction setup costs (memory and PCI devices may
+ both be able to do this); and
+
+ (*) the CPU's data cache may affect the ordering, and whilst cache-coherency
+ mechanisms may alleviate this - once the store has actually hit the cache
+ - there's no guarantee that the coherency management will be propagated in
+ order to other CPUs.
+
+So what another CPU, say, might actually observe from the above piece of code
+is:
+
+ LOAD *A, ..., LOAD {*C,*D}, STORE *E, STORE *B
+
+ (Where "LOAD {*C,*D}" is a combined load)
+
+
+However, it is guaranteed that a CPU will be self-consistent: it will see its
+_own_ accesses appear to be correctly ordered, without the need for a memory
+barrier. For instance with the following code:
+
+ U = *A;
+ *A = V;
+ *A = W;
+ X = *A;
+ *A = Y;
+ Z = *A;
+
+and assuming no intervention by an external influence, it can be assumed that
+the final result will appear to be:
+
+ U == the original value of *A
+ X == W
+ Z == Y
+ *A == Y
+
+The code above may cause the CPU to generate the full sequence of memory
+accesses:
+
+ U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
+
+in that order, but, without intervention, the sequence may have almost any
+combination of elements combined or discarded, provided the program's view of
+the world remains consistent.
+
+The compiler may also combine, discard or defer elements of the sequence before
+the CPU even sees them.
+
+For instance:
+
+ *A = V;
+ *A = W;
+
+may be reduced to:
+
+ *A = W;
+
+since, without a write barrier, it can be assumed that the effect of the
+storage of V to *A is lost. Similarly:
+
+ *A = Y;
+ Z = *A;
+
+may, without a memory barrier, be reduced to:
+
+ *A = Y;
+ Z = Y;
+
+and the LOAD operation never appear outside of the CPU.
+
+
+AND THEN THERE'S THE ALPHA
+--------------------------
+
+The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
+some versions of the Alpha CPU have a split data cache, permitting them to have
+two semantically related cache lines updating at separate times. This is where
+the data dependency barrier really becomes necessary as this synchronises both
+caches with the memory coherence system, thus making it seem like pointer
+changes vs new data occur in the right order.
+
+The Alpha defines the Linux's kernel's memory barrier model.
+
+See the subsection on "Cache Coherency" above.
+
+
+==========
+REFERENCES
+==========
+
+Alpha AXP Architecture Reference Manual, Second Edition (Sites & Witek,
+Digital Press)
+ Chapter 5.2: Physical Address Space Characteristics
+ Chapter 5.4: Caches and Write Buffers
+ Chapter 5.5: Data Sharing
+ Chapter 5.6: Read/Write Ordering
+
+AMD64 Architecture Programmer's Manual Volume 2: System Programming
+ Chapter 7.1: Memory-Access Ordering
+ Chapter 7.4: Buffering and Combining Memory Writes
+
+IA-32 Intel Architecture Software Developer's Manual, Volume 3:
+System Programming Guide
+ Chapter 7.1: Locked Atomic Operations
+ Chapter 7.2: Memory Ordering
+ Chapter 7.4: Serializing Instructions
+
+The SPARC Architecture Manual, Version 9
+ Chapter 8: Memory Models
+ Appendix D: Formal Specification of the Memory Models
+ Appendix J: Programming with the Memory Models
+
+UltraSPARC Programmer Reference Manual
+ Chapter 5: Memory Accesses and Cacheability
+ Chapter 15: Sparc-V9 Memory Models
+
+UltraSPARC III Cu User's Manual
+ Chapter 9: Memory Models
+
+UltraSPARC IIIi Processor User's Manual
+ Chapter 8: Memory Models
+
+UltraSPARC Architecture 2005
+ Chapter 9: Memory
+ Appendix D: Formal Specifications of the Memory Models
+
+UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005
+ Chapter 8: Memory Models
+ Appendix F: Caches and Cache Coherency
+
+Solaris Internals, Core Kernel Architecture, p63-68:
+ Chapter 3.3: Hardware Considerations for Locks and
+ Synchronization
+
+Unix Systems for Modern Architectures, Symmetric Multiprocessing and Caching
+for Kernel Programmers:
+ Chapter 13: Other Memory Models
+
+Intel Itanium Architecture Software Developer's Manual: Volume 1:
+ Section 2.6: Speculation
+ Section 4.4: Memory Access
diff --git a/Documentation/networking/TODO b/Documentation/networking/TODO
deleted file mode 100644
index 66d36ff..0000000
--- a/Documentation/networking/TODO
+++ /dev/null
@@ -1,18 +0,0 @@
-To-do items for network drivers
--------------------------------
-
-* Move ethernet crc routine to generic code
-
-* (for 2.5) Integrate Jamal Hadi Salim's netdev Rx polling API change
-
-* Audit all net drivers to make sure magic packet / wake-on-lan /
- similar features are disabled in the driver by default.
-
-* Audit all net drivers to make sure the module always prints out a
- version string when loaded as a module, but only prints a version
- string when built into the kernel if a device is detected.
-
-* Add ETHTOOL_GDRVINFO ioctl support to all ethernet drivers.
-
-* dmfe PCI DMA is totally wrong and only works on x86
-
diff --git a/Documentation/networking/bcm43xx.txt b/Documentation/networking/bcm43xx.txt
new file mode 100644
index 0000000..28541d2
--- /dev/null
+++ b/Documentation/networking/bcm43xx.txt
@@ -0,0 +1,36 @@
+
+ BCM43xx Linux Driver Project
+ ============================
+
+About this software
+-------------------
+
+The goal of this project is to develop a linux driver for Broadcom
+BCM43xx chips, based on the specification at
+http://bcm-specs.sipsolutions.net/
+
+The project page is http://bcm43xx.berlios.de/
+
+
+Requirements
+------------
+
+1) Linux Kernel 2.6.16 or later
+ http://www.kernel.org/
+
+ You may want to configure your kernel with:
+
+ CONFIG_DEBUG_FS (optional):
+ -> Kernel hacking
+ -> Debug Filesystem
+
+2) SoftMAC IEEE 802.11 Networking Stack extension and patched ieee80211
+ modules:
+ http://softmac.sipsolutions.net/
+
+3) Firmware Files
+
+ Please try fwcutter. Fwcutter can extract the firmware from various
+ binary driver files. It supports driver files from Windows, MacOS and
+ Linux. You can get fwcutter from http://bcm43xx.berlios.de/.
+ Also, fwcutter comes with a README file for further instructions.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ee551c6..217e517 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -719,6 +719,11 @@
- model : this is your board name/model
- #address-cells : address representation for "root" devices
- #size-cells: the size representation for "root" devices
+ - device_type : This property shouldn't be necessary. However, if
+ you decide to create a device_type for your root node, make sure it
+ is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
+ one for 64-bit, or a CHRP-type machine for 32-bit as this will
+ matched by the kernel this way.
Additionally, some recommended properties are:
diff --git a/MAINTAINERS b/MAINTAINERS
index e5b051f..c946581 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1885,6 +1885,7 @@
P: Networking Team
M: netdev@vger.kernel.org
L: netdev@vger.kernel.org
+W: http://linux-net.osdl.org/
S: Maintained
NETWORKING [IPv4/IPv6]
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index 1898ea7..9d6186d 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -216,8 +216,6 @@
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_ALPHA_IRONGATE
EXPORT_SYMBOL(irongate_ioremap);
EXPORT_SYMBOL(irongate_iounmap);
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 44866cb..7f6a984 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -435,7 +435,7 @@
str = pchar;
} while(*str);
- return 0;
+ return 1;
}
__setup("io7=", marvel_specify_io7);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba46d77..dc5a933 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -77,6 +77,14 @@
config ARCH_MTD_XIP
bool
+config VECTORS_BASE
+ hex
+ default 0xffff0000 if MMU
+ default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x00000000
+ help
+ The base address of exception vectors.
+
source "init/Kconfig"
menu "System Type"
@@ -839,6 +847,8 @@
source "drivers/mfd/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
new file mode 100644
index 0000000..e1574be
--- /dev/null
+++ b/arch/arm/Kconfig-nommu
@@ -0,0 +1,44 @@
+#
+# Kconfig for uClinux(non-paged MM) depend configurations
+# Hyok S. Choi <hyok.choi@samsung.com>
+#
+
+config SET_MEM_PARAM
+ bool "Set flash/sdram size and base addr"
+ help
+ Say Y to manually set the base addresses and sizes.
+ otherwise, the default values are assigned.
+
+config DRAM_BASE
+ hex '(S)DRAM Base Address' if SET_MEM_PARAM
+ default 0x00800000
+
+config DRAM_SIZE
+ hex '(S)DRAM SIZE' if SET_MEM_PARAM
+ default 0x00800000
+
+config FLASH_MEM_BASE
+ hex 'FLASH Base Address' if SET_MEM_PARAM
+ default 0x00400000
+
+config FLASH_SIZE
+ hex 'FLASH Size' if SET_MEM_PARAM
+ default 0x00400000
+
+config REMAP_VECTORS_TO_RAM
+ bool 'Install vectors to the begining of RAM' if DRAM_BASE
+ depends on DRAM_BASE
+ help
+ The kernel needs to change the hardware exception vectors.
+ In nommu mode, the hardware exception vectors are normally
+ placed at address 0x00000000. However, this region may be
+ occupied by read-only memory depending on H/W design.
+
+ If the region contains read-write memory, say 'n' here.
+
+ If your CPU provides a remap facility which allows the exception
+ vectors to be mapped to writable memory, say 'n' here.
+
+ Otherwise, say 'y' here. In this case, the kernel will require
+ external support to redirect the hardware exception vectors to
+ the writable versions located at DRAM_BASE.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ce3e804..95a9627 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -20,6 +20,11 @@
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
+# defines filename extension depending memory manement type.
+ifeq ($(CONFIG_MMU),)
+MMUEXT := -nommu
+endif
+
ifeq ($(CONFIG_FRAME_POINTER),y)
CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
@@ -73,7 +78,7 @@
CHECKFLAGS += -D__arm__
#Default value
-head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
machine-$(CONFIG_ARCH_RPC) := rpc
@@ -133,7 +138,7 @@
MACHINE :=
endif
-export TEXT_OFFSET GZFLAGS
+export TEXT_OFFSET GZFLAGS MMUEXT
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 491c7e4..b56f5e6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -2,6 +2,7 @@
* linux/arch/arm/boot/compressed/head.S
*
* Copyright (C) 1996-2002 Russell King
+ * Copyright (C) 2004 Hyok S. Choi (MPU support)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -320,6 +321,62 @@
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+ mcr p15, 0, r0, c6, c7, 1
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ D-cache on
+ mcr p15, 0, r0, c2, c0, 1 @ I-cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 1 @ I-access permission
+ mcr p15, 0, r0, c5, c0, 0 @ D-access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ ...I .... ..D. WC.M
+ orr r0, r0, #0x002d @ .... .... ..1. 11.1
+ orr r0, r0, #0x1000 @ ...1 .... .... ....
+
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 0 @ access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ .... .... .... WC.M
+ orr r0, r0, #0x000d @ .... .... .... 11.1
+ mov r0, #0
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
__setup_mmu: sub r3, r4, #16384 @ Page directory size
bic r3, r3, #0xff @ Align the pointer
bic r3, r3, #0x3f00
@@ -496,6 +553,18 @@
b __armv4_mmu_cache_off
mov pc, lr
+ .word 0x41007400 @ ARM74x
+ .word 0xff00ff00
+ b __armv3_mpu_cache_on
+ b __armv3_mpu_cache_off
+ b __armv3_mpu_cache_flush
+
+ .word 0x41009400 @ ARM94x
+ .word 0xff00ff00
+ b __armv4_mpu_cache_on
+ b __armv4_mpu_cache_off
+ b __armv4_mpu_cache_flush
+
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
@@ -562,6 +631,24 @@
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
+__armv4_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
+ mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
__armv4_mmu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
@@ -601,6 +688,24 @@
mov r3, #16
b call_cache_fn
+__armv4_mpu_cache_flush:
+ mov r2, #1
+ mov r3, #0
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+ mov r1, #7 << 5 @ 8 segments
+1: orr r3, r1, #63 << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+
+ teq r2, #0
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+
__armv6_mmu_cache_flush:
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
@@ -638,6 +743,7 @@
mov pc, lr
__armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
mov r1, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 978d32e..3cd8c9e 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/leds.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -75,6 +76,7 @@
struct sharpsl_pm_status sharpsl_pm;
DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
static int get_percentage(int voltage)
@@ -190,10 +192,10 @@
dev_err(sharpsl_pm.dev, "Charging Error!\n");
} else if (val == SHARPSL_LED_ON) {
dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
} else {
dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
}
}
@@ -786,6 +788,8 @@
init_timer(&sharpsl_pm.chrg_full_timer);
sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->init();
device_create_file(&pdev->dev, &dev_attr_battery_percentage);
@@ -807,6 +811,8 @@
device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->exit();
del_timer_sync(&sharpsl_pm.chrg_full_timer);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 355914f..ab8e600 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -666,7 +666,7 @@
*
* #define __kernel_dmb() \
* asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- * : : : "lr","cc" )
+ * : : : "r0", "lr","cc" )
*/
__kuser_memory_barrier: @ 0xffff0fa0
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
new file mode 100644
index 0000000..a52da0d
--- /dev/null
+++ b/arch/arm/kernel/head-common.S
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/arm/kernel/head-common.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .type __switch_data, %object
+__switch_data:
+ .long __mmap_switched
+ .long __data_loc @ r4
+ .long __data_start @ r5
+ .long __bss_start @ r6
+ .long _end @ r7
+ .long processor_id @ r4
+ .long __machine_arch_type @ r5
+ .long cr_alignment @ r6
+ .long init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r9 = processor ID
+ */
+ .type __mmap_switched, %function
+__mmap_switched:
+ adr r3, __switch_data + 4
+
+ ldmia r3!, {r4, r5, r6, r7}
+ cmp r4, r5 @ Copy data segment if needed
+1: cmpne r5, r6
+ ldrne fp, [r4], #4
+ strne fp, [r5], #4
+ bne 1b
+
+ mov fp, #0 @ Clear BSS (and zero fp)
+1: cmp r6, r7
+ strcc fp, [r6],#4
+ bcc 1b
+
+ ldmia r3, {r4, r5, r6, sp}
+ str r9, [r4] @ Save processor ID
+ str r1, [r5] @ Save machine type
+ bic r4, r0, #CR_A @ Clear 'A' bit
+ stmia r6, {r0, r4} @ Save control register values
+ b start_kernel
+
+/*
+ * Exception handling. Something went wrong and we can't proceed. We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+ .type __error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_p1
+ bl printascii
+ b __error
+str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
+ .align
+#endif
+
+ .type __error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+ mov r4, r1 @ preserve machine ID
+ adr r0, str_a1
+ bl printascii
+ mov r0, r4
+ bl printhex8
+ adr r0, str_a2
+ bl printascii
+ adr r3, 3f
+ ldmia r3, {r4, r5, r6} @ get machine desc list
+ sub r4, r3, r4 @ get offset between virt&phys
+ add r5, r5, r4 @ convert virt addresses to
+ add r6, r6, r4 @ physical address space
+1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
+ bl printhex8
+ mov r0, #'\t'
+ bl printch
+ ldr r0, [r5, #MACHINFO_NAME] @ get machine name
+ add r0, r0, r4
+ bl printascii
+ mov r0, #'\n'
+ bl printch
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ adr r0, str_a3
+ bl printascii
+ b __error
+str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
+ .align
+#endif
+
+ .type __error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+ mov r0, #0x02000000
+ mov r3, #0x11
+ orr r3, r3, r3, lsl #8
+ orr r3, r3, r3, lsl #16
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+#endif
+1: mov r0, r0
+ b 1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list. Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space). We have to
+ * calculate the offset.
+ *
+ * r9 = cpuid
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = proc_info pointer in physical address space
+ * r9 = cpuid (preserved)
+ */
+ .type __lookup_processor_type, %function
+__lookup_processor_type:
+ adr r3, 3f
+ ldmda r3, {r5 - r7}
+ sub r3, r3, r7 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldmia r5, {r3, r4} @ value, mask
+ and r4, r4, r9 @ mask wanted bits
+ teq r3, r4
+ beq 2f
+ add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown processor
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+ stmfd sp!, {r4 - r7, r9, lr}
+ mov r9, r0
+ bl __lookup_processor_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+ .long __proc_info_begin
+ .long __proc_info_end
+3: .long .
+ .long __arch_info_begin
+ .long __arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space). We have to calculate the offset.
+ *
+ * r1 = machine architecture number
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = mach_info pointer in physical address space
+ */
+ .type __lookup_machine_type, %function
+__lookup_machine_type:
+ adr r3, 3b
+ ldmia r3, {r4, r5, r6}
+ sub r3, r3, r4 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
+ teq r3, r1 @ matches loader number?
+ beq 2f @ found
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown machine
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+ stmfd sp!, {r4 - r6, lr}
+ mov r1, r0
+ bl __lookup_machine_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, pc}
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
new file mode 100644
index 0000000..b093ab8
--- /dev/null
+++ b/arch/arm/kernel/head-nommu.S
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/kernel/head-nommu.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common kernel startup code (non-paged MM)
+ * for 32-bit CPUs which has a process ID register(CP15).
+ *
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/mach-types.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/constants.h>
+#include <asm/system.h>
+
+#define PROCINFO_INITFUNC 12
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code. The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+ __INIT
+ .type stext, %function
+ENTRY(stext)
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+ @ and irqs disabled
+ mrc p15, 0, r9, c0, c0 @ get processor id
+ bl __lookup_processor_type @ r5=procinfo r9=cpuid
+ movs r10, r5 @ invalid processor (r5=0)?
+ beq __error_p @ yes, error 'p'
+ bl __lookup_machine_type @ r5=machinfo
+ movs r8, r5 @ invalid machine (r5=0)?
+ beq __error_a @ yes, error 'a'
+
+ ldr r13, __switch_data @ address to jump to after
+ @ the initialization is done
+ adr lr, __after_proc_init @ return (PIC) address
+ add pc, r10, #PROCINFO_INITFUNC
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+ .type __after_proc_init, %function
+__after_proc_init:
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+#ifdef CONFIG_ALIGNMENT_TRAP
+ orr r0, r0, #CR_A
+#else
+ bic r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #CR_I
+#endif
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov pc, r13 @ clear the BSS and jump
+ @ to start_kernel
+
+#include "head-common.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 53b6901..04b66a9 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -102,49 +102,6 @@
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
- .type __switch_data, %object
-__switch_data:
- .long __mmap_switched
- .long __data_loc @ r4
- .long __data_start @ r5
- .long __bss_start @ r6
- .long _end @ r7
- .long processor_id @ r4
- .long __machine_arch_type @ r5
- .long cr_alignment @ r6
- .long init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- * r0 = cp#15 control register
- * r1 = machine ID
- * r9 = processor ID
- */
- .type __mmap_switched, %function
-__mmap_switched:
- adr r3, __switch_data + 4
-
- ldmia r3!, {r4, r5, r6, r7}
- cmp r4, r5 @ Copy data segment if needed
-1: cmpne r5, r6
- ldrne fp, [r4], #4
- strne fp, [r5], #4
- bne 1b
-
- mov fp, #0 @ Clear BSS (and zero fp)
-1: cmp r6, r7
- strcc fp, [r6],#4
- bcc 1b
-
- ldmia r3, {r4, r5, r6, sp}
- str r9, [r4] @ Save processor ID
- str r1, [r5] @ Save machine type
- bic r4, r0, #CR_A @ Clear 'A' bit
- stmia r6, {r0, r4} @ Save control register values
- b start_kernel
-
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
@@ -367,166 +324,4 @@
mov pc, lr
.ltorg
-
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
- .type __error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- bl printascii
- b __error
-str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
- .align
-#endif
-
- .type __error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
- mov r4, r1 @ preserve machine ID
- adr r0, str_a1
- bl printascii
- mov r0, r4
- bl printhex8
- adr r0, str_a2
- bl printascii
- adr r3, 3f
- ldmia r3, {r4, r5, r6} @ get machine desc list
- sub r4, r3, r4 @ get offset between virt&phys
- add r5, r5, r4 @ convert virt addresses to
- add r6, r6, r4 @ physical address space
-1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
- bl printhex8
- mov r0, #'\t'
- bl printch
- ldr r0, [r5, #MACHINFO_NAME] @ get machine name
- add r0, r0, r4
- bl printascii
- mov r0, #'\n'
- bl printch
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- adr r0, str_a3
- bl printascii
- b __error
-str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
- .align
-#endif
-
- .type __error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
-1: mov r0, r0
- b 1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list. Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space). We have to
- * calculate the offset.
- *
- * r9 = cpuid
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = proc_info pointer in physical address space
- * r9 = cpuid (preserved)
- */
- .type __lookup_processor_type, %function
-__lookup_processor_type:
- adr r3, 3f
- ldmda r3, {r5 - r7}
- sub r3, r3, r7 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldmia r5, {r3, r4} @ value, mask
- and r4, r4, r9 @ mask wanted bits
- teq r3, r4
- beq 2f
- add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown processor
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
- stmfd sp!, {r4 - r7, r9, lr}
- mov r9, r0
- bl __lookup_processor_type
- mov r0, r5
- ldmfd sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
- .long __proc_info_begin
- .long __proc_info_end
-3: .long .
- .long __arch_info_begin
- .long __arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space). We have to calculate the offset.
- *
- * r1 = machine architecture number
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = mach_info pointer in physical address space
- */
- .type __lookup_machine_type, %function
-__lookup_machine_type:
- adr r3, 3b
- ldmia r3, {r4, r5, r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
- teq r3, r1 @ matches loader number?
- beq 2f @ found
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown machine
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}
+#include "head-common.S"
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 489c069..1ff75ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -474,4 +474,3 @@
} while (count ++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 9991049..27beece 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -7,6 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define KERN_SIGRETURN_CODE 0xffff0500
+#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
extern const unsigned long sigreturn_codes[7];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d566d5f..35230a0 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -688,6 +688,7 @@
void __init trap_init(void)
{
+ unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -698,9 +699,9 @@
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
- memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
- memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
- memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
+ memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+ memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
/*
* Copy signal return handlers into the vector page, and
@@ -709,6 +710,6 @@
memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
sizeof(sigreturn_codes));
- flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
+ flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 68923b1..d6d7260 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -141,6 +141,8 @@
*/
static struct corgibl_machinfo corgi_bl_machinfo = {
.max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
};
@@ -164,6 +166,14 @@
/*
+ * Corgi LEDs
+ */
+static struct platform_device corgiled_device = {
+ .name = "corgi-led",
+ .id = -1,
+};
+
+/*
* Corgi Touch Screen Device
*/
static struct resource corgits_resources[] = {
@@ -297,6 +307,7 @@
&corgikbd_device,
&corgibl_device,
&corgits_device,
+ &corgiled_device,
};
static void __init corgi_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 0dbb079..19b372d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -220,6 +220,8 @@
* Spitz Backlight Device
*/
static struct corgibl_machinfo spitz_bl_machinfo = {
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.max_intensity = 0x2f,
};
@@ -242,6 +244,14 @@
/*
+ * Spitz LEDs
+ */
+static struct platform_device spitzled_device = {
+ .name = "spitz-led",
+ .id = -1,
+};
+
+/*
* Spitz Touch Screen Device
*/
static struct resource spitzts_resources[] = {
@@ -418,6 +428,7 @@
&spitzkbd_device,
&spitzts_device,
&spitzbl_device,
+ &spitzled_device,
};
static void __init common_init(void)
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 66ec717..76c0e7f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -251,10 +251,19 @@
.id = -1,
};
+/*
+ * Tosa LEDs
+ */
+static struct platform_device tosaled_device = {
+ .name = "tosa-led",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
+ &tosaled_device,
};
static void __init tosa_init(void)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index f90513e..b9dfce5 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -30,6 +30,7 @@
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/pgtable.h>
+#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm26/kernel/armksyms.c b/arch/arm26/kernel/armksyms.c
index 811a6376c..a6a1b33 100644
--- a/arch/arm26/kernel/armksyms.c
+++ b/arch/arm26/kernel/armksyms.c
@@ -212,8 +212,6 @@
EXPORT_SYMBOL(sys_exit);
EXPORT_SYMBOL(sys_wait4);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_PREEMPT
EXPORT_SYMBOL(kernel_flag);
#endif
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index aa6b7d0..07c8ffa 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -79,8 +79,6 @@
EXPORT_SYMBOL(__outsl_ns);
EXPORT_SYMBOL(__insl_ns);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
EXPORT_SYMBOL(atomic_test_and_ANDNOT_mask);
EXPORT_SYMBOL(atomic_test_and_OR_mask);
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
index 69d6ad3..b6cd78c 100644
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -55,8 +55,6 @@
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index eb5279d..6273bf7 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -415,6 +415,7 @@
void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, ver, maxlvt;
+ int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
if (esr_disable) {
@@ -452,6 +453,25 @@
apic_write_around(APIC_TASKPRI, value);
/*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j))
+ ack_APIC_irq();
+ }
+ }
+
+ /*
* Now that we are all set up, enable the APIC
*/
value = apic_read(APIC_SPIV);
@@ -732,7 +752,7 @@
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug\n", str);
- return 0;
+ return 1;
}
__setup("apic=", apic_set_verbosity);
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
index 6170af3..afa0888 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.c
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -64,13 +64,13 @@
static int __init mcheck_disable(char *str)
{
mce_disabled = 1;
- return 0;
+ return 1;
}
static int __init mcheck_enable(char *str)
{
mce_disabled = -1;
- return 0;
+ return 1;
}
__setup("nomce", mcheck_disable);
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 3b329af..f8f132a 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -644,7 +644,7 @@
int __init irqbalance_disable(char *str)
{
irqbalance_disabled = 1;
- return 0;
+ return 1;
}
__setup("noirqbalance", irqbalance_disable);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index 24b3e74..6259afe 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -781,7 +781,6 @@
} while (count++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
/*
* sys_alloc_thread_area: get a yet unused TLS descriptor index.
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index 326595f..4f58b9c 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -312,3 +312,5 @@
.long sys_unshare /* 310 */
.long sys_set_robust_list
.long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 6b63a5a..e385279 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -1193,6 +1193,6 @@
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s, NULL, 0);
- return 0;
+ return 1;
}
__setup("kstack=", kstack_setup);
diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S
index fadb5bc..a92262f 100644
--- a/arch/i386/kernel/vsyscall-sigreturn.S
+++ b/arch/i386/kernel/vsyscall-sigreturn.S
@@ -44,7 +44,7 @@
.LSTARTCIEDLSI1:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 1 /* Code alignment factor */
.sleb128 -4 /* Data alignment factor */
.byte 8 /* Return address register column */
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 0e3eda9..750e8e7 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1605,5 +1605,6 @@
data8 sys_ni_syscall // reserved for pselect
data8 sys_ni_syscall // 1295 reserved for ppoll
data8 sys_unshare
+ data8 sys_splice
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S
index e1e4aba..7c99e6e 100644
--- a/arch/ia64/kernel/gate.lds.S
+++ b/arch/ia64/kernel/gate.lds.S
@@ -59,6 +59,7 @@
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(__ex_table)
+ *(__mca_table)
}
}
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 8832c55..7956eb9 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -9,54 +9,65 @@
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
*
- * 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O APIC code.
- * In particular, we now have separate handlers for edge
- * and level triggered interrupts.
- * 00/10/27 Asit Mallick, Goutham Rao <goutham.rao@intel.com> IRQ vector allocation
- * PCI to vector mapping, shared PCI interrupts.
- * 00/10/27 D. Mosberger Document things a bit more to make them more understandable.
- * Clean up much of the old IOSAPIC cruft.
- * 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts and fixes for
- * ACPI S5(SoftOff) support.
+ * 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O
+ * APIC code. In particular, we now have separate
+ * handlers for edge and level triggered
+ * interrupts.
+ * 00/10/27 Asit Mallick, Goutham Rao <goutham.rao@intel.com> IRQ vector
+ * allocation PCI to vector mapping, shared PCI
+ * interrupts.
+ * 00/10/27 D. Mosberger Document things a bit more to make them more
+ * understandable. Clean up much of the old
+ * IOSAPIC cruft.
+ * 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts
+ * and fixes for ACPI S5(SoftOff) support.
* 02/01/23 J.I. Lee iosapic pgm fixes for PCI irq routing from _PRT
- * 02/01/07 E. Focht <efocht@ess.nec.de> Redirectable interrupt vectors in
- * iosapic_set_affinity(), initializations for
- * /proc/irq/#/smp_affinity
+ * 02/01/07 E. Focht <efocht@ess.nec.de> Redirectable interrupt
+ * vectors in iosapic_set_affinity(),
+ * initializations for /proc/irq/#/smp_affinity
* 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing.
* 02/04/18 J.I. Lee bug fix in iosapic_init_pci_irq
- * 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to IOSAPIC mapping
- * error
+ * 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to
+ * IOSAPIC mapping error
* 02/07/29 T. Kochi Allocate interrupt vectors dynamically
- * 02/08/04 T. Kochi Cleaned up terminology (irq, global system interrupt, vector, etc.)
- * 02/09/20 D. Mosberger Simplified by taking advantage of ACPI's pci_irq code.
+ * 02/08/04 T. Kochi Cleaned up terminology (irq, global system
+ * interrupt, vector, etc.)
+ * 02/09/20 D. Mosberger Simplified by taking advantage of ACPI's
+ * pci_irq code.
* 03/02/19 B. Helgaas Make pcat_compat system-wide, not per-IOSAPIC.
- * Remove iosapic_address & gsi_base from external interfaces.
- * Rationalize __init/__devinit attributes.
+ * Remove iosapic_address & gsi_base from
+ * external interfaces. Rationalize
+ * __init/__devinit attributes.
* 04/12/04 Ashok Raj <ashok.raj@intel.com> Intel Corporation 2004
- * Updated to work with irq migration necessary for CPU Hotplug
+ * Updated to work with irq migration necessary
+ * for CPU Hotplug
*/
/*
- * Here is what the interrupt logic between a PCI device and the kernel looks like:
+ * Here is what the interrupt logic between a PCI device and the kernel looks
+ * like:
*
- * (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC, INTD). The
- * device is uniquely identified by its bus--, and slot-number (the function
- * number does not matter here because all functions share the same interrupt
- * lines).
+ * (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC,
+ * INTD). The device is uniquely identified by its bus-, and slot-number
+ * (the function number does not matter here because all functions share
+ * the same interrupt lines).
*
- * (2) The motherboard routes the interrupt line to a pin on a IOSAPIC controller.
- * Multiple interrupt lines may have to share the same IOSAPIC pin (if they're level
- * triggered and use the same polarity). Each interrupt line has a unique Global
- * System Interrupt (GSI) number which can be calculated as the sum of the controller's
- * base GSI number and the IOSAPIC pin number to which the line connects.
+ * (2) The motherboard routes the interrupt line to a pin on a IOSAPIC
+ * controller. Multiple interrupt lines may have to share the same
+ * IOSAPIC pin (if they're level triggered and use the same polarity).
+ * Each interrupt line has a unique Global System Interrupt (GSI) number
+ * which can be calculated as the sum of the controller's base GSI number
+ * and the IOSAPIC pin number to which the line connects.
*
- * (3) The IOSAPIC uses an internal routing table entries (RTEs) to map the IOSAPIC pin
- * into the IA-64 interrupt vector. This interrupt vector is then sent to the CPU.
+ * (3) The IOSAPIC uses an internal routing table entries (RTEs) to map the
+ * IOSAPIC pin into the IA-64 interrupt vector. This interrupt vector is then
+ * sent to the CPU.
*
- * (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface is used as
- * architecture-independent interrupt handling mechanism in Linux. As an
- * IRQ is a number, we have to have IA-64 interrupt vector number <-> IRQ number
- * mapping. On smaller systems, we use one-to-one mapping between IA-64 vector and
- * IRQ. A platform can implement platform_irq_to_vector(irq) and
+ * (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface is
+ * used as architecture-independent interrupt handling mechanism in Linux.
+ * As an IRQ is a number, we have to have
+ * IA-64 interrupt vector number <-> IRQ number mapping. On smaller
+ * systems, we use one-to-one mapping between IA-64 vector and IRQ. A
+ * platform can implement platform_irq_to_vector(irq) and
* platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
* Please see also include/asm-ia64/hw_irq.h for those APIs.
*
@@ -64,9 +75,9 @@
*
* PCI pin -> global system interrupt (GSI) -> IA-64 vector <-> IRQ
*
- * Note: The term "IRQ" is loosely used everywhere in Linux kernel to describe interrupts.
- * Now we use "IRQ" only for Linux IRQ's. ISA IRQ (isa_irq) is the only exception in this
- * source code.
+ * Note: The term "IRQ" is loosely used everywhere in Linux kernel to
+ * describeinterrupts. Now we use "IRQ" only for Linux IRQ's. ISA IRQ
+ * (isa_irq) is the only exception in this source code.
*/
#include <linux/config.h>
@@ -90,7 +101,6 @@
#include <asm/ptrace.h>
#include <asm/system.h>
-
#undef DEBUG_INTERRUPT_ROUTING
#ifdef DEBUG_INTERRUPT_ROUTING
@@ -99,36 +109,46 @@
#define DBG(fmt...)
#endif
-#define NR_PREALLOCATE_RTE_ENTRIES (PAGE_SIZE / sizeof(struct iosapic_rte_info))
+#define NR_PREALLOCATE_RTE_ENTRIES \
+ (PAGE_SIZE / sizeof(struct iosapic_rte_info))
#define RTE_PREALLOCATED (1)
static DEFINE_SPINLOCK(iosapic_lock);
-/* These tables map IA-64 vectors to the IOSAPIC pin that generates this vector. */
+/*
+ * These tables map IA-64 vectors to the IOSAPIC pin that generates this
+ * vector.
+ */
struct iosapic_rte_info {
- struct list_head rte_list; /* node in list of RTEs sharing the same vector */
+ struct list_head rte_list; /* node in list of RTEs sharing the
+ * same vector */
char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
+ unsigned int gsi_base; /* first GSI assigned to this
+ * IOSAPIC */
char rte_index; /* IOSAPIC RTE index */
int refcnt; /* reference counter */
unsigned int flags; /* flags */
} ____cacheline_aligned;
static struct iosapic_intr_info {
- struct list_head rtes; /* RTEs using this vector (empty => not an IOSAPIC interrupt) */
+ struct list_head rtes; /* RTEs using this vector (empty =>
+ * not an IOSAPIC interrupt) */
int count; /* # of RTEs that shares this vector */
- u32 low32; /* current value of low word of Redirection table entry */
+ u32 low32; /* current value of low word of
+ * Redirection table entry */
unsigned int dest; /* destination CPU physical ID */
unsigned char dmode : 3; /* delivery mode (see iosapic.h) */
- unsigned char polarity: 1; /* interrupt polarity (see iosapic.h) */
+ unsigned char polarity: 1; /* interrupt polarity
+ * (see iosapic.h) */
unsigned char trigger : 1; /* trigger mode (see iosapic.h) */
} iosapic_intr_info[IA64_NUM_VECTORS];
static struct iosapic {
char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
- unsigned short num_rte; /* number of RTE in this IOSAPIC */
+ unsigned int gsi_base; /* first GSI assigned to this
+ * IOSAPIC */
+ unsigned short num_rte; /* # of RTEs on this IOSAPIC */
int rtes_inuse; /* # of RTEs in use on this IOSAPIC */
#ifdef CONFIG_NUMA
unsigned short node; /* numa node association via pxm */
@@ -149,7 +169,8 @@
int i;
for (i = 0; i < NR_IOSAPICS; i++) {
- if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
+ if ((unsigned) (gsi - iosapic_lists[i].gsi_base) <
+ iosapic_lists[i].num_rte)
return i;
}
@@ -162,7 +183,8 @@
struct iosapic_intr_info *info;
struct iosapic_rte_info *rte;
- for (info = iosapic_intr_info; info < iosapic_intr_info + IA64_NUM_VECTORS; ++info)
+ for (info = iosapic_intr_info; info <
+ iosapic_intr_info + IA64_NUM_VECTORS; ++info)
list_for_each_entry(rte, &info->rtes, rte_list)
if (rte->gsi_base + rte->rte_index == gsi)
return info - iosapic_intr_info;
@@ -185,8 +207,8 @@
unsigned long flags;
int irq;
/*
- * XXX fix me: this assumes an identity mapping vetween IA-64 vector and Linux irq
- * numbers...
+ * XXX fix me: this assumes an identity mapping between IA-64 vector
+ * and Linux irq numbers...
*/
spin_lock_irqsave(&iosapic_lock, flags);
{
@@ -197,7 +219,8 @@
return irq;
}
-static struct iosapic_rte_info *gsi_vector_to_rte(unsigned int gsi, unsigned int vec)
+static struct iosapic_rte_info *gsi_vector_to_rte(unsigned int gsi,
+ unsigned int vec)
{
struct iosapic_rte_info *rte;
@@ -237,7 +260,9 @@
for (irq = 0; irq < NR_IRQS; ++irq)
if (irq_to_vector(irq) == vector) {
- set_irq_affinity_info(irq, (int)(dest & 0xffff), redir);
+ set_irq_affinity_info(irq,
+ (int)(dest & 0xffff),
+ redir);
break;
}
}
@@ -259,7 +284,7 @@
}
static void
-nop (unsigned int vector)
+nop (unsigned int irq)
{
/* do nothing... */
}
@@ -281,7 +306,8 @@
{
/* set only the mask bit */
low32 = iosapic_intr_info[vec].low32 |= IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
@@ -306,7 +332,8 @@
spin_lock_irqsave(&iosapic_lock, flags);
{
low32 = iosapic_intr_info[vec].low32 &= ~IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
@@ -346,21 +373,25 @@
spin_lock_irqsave(&iosapic_lock, flags);
{
- low32 = iosapic_intr_info[vec].low32 & ~(7 << IOSAPIC_DELIVERY_SHIFT);
+ low32 = iosapic_intr_info[vec].low32 &
+ ~(7 << IOSAPIC_DELIVERY_SHIFT);
if (redir)
/* change delivery mode to lowest priority */
- low32 |= (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT);
+ low32 |= (IOSAPIC_LOWEST_PRIORITY <<
+ IOSAPIC_DELIVERY_SHIFT);
else
/* change delivery mode to fixed */
low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT);
iosapic_intr_info[vec].low32 = low32;
iosapic_intr_info[vec].dest = dest;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
- iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index), high32);
+ iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index),
+ high32);
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
}
}
@@ -433,7 +464,8 @@
* interrupt for real. This prevents IRQ storms from unhandled
* devices.
*/
- if ((idesc->status & (IRQ_PENDING|IRQ_DISABLED)) == (IRQ_PENDING|IRQ_DISABLED))
+ if ((idesc->status & (IRQ_PENDING|IRQ_DISABLED)) ==
+ (IRQ_PENDING|IRQ_DISABLED))
mask_irq(irq);
}
@@ -467,7 +499,8 @@
return iosapic_read(addr, IOSAPIC_VERSION);
}
-static int iosapic_find_sharable_vector (unsigned long trigger, unsigned long pol)
+static int iosapic_find_sharable_vector (unsigned long trigger,
+ unsigned long pol)
{
int i, vector = -1, min_count = -1;
struct iosapic_intr_info *info;
@@ -482,7 +515,8 @@
for (i = IA64_FIRST_DEVICE_VECTOR; i <= IA64_LAST_DEVICE_VECTOR; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
- (info->dmode == IOSAPIC_FIXED || info->dmode == IOSAPIC_LOWEST_PRIORITY)) {
+ (info->dmode == IOSAPIC_FIXED || info->dmode ==
+ IOSAPIC_LOWEST_PRIORITY)) {
if (min_count == -1 || info->count < min_count) {
vector = i;
min_count = info->count;
@@ -506,12 +540,15 @@
new_vector = assign_irq_vector(AUTO_ASSIGN);
if (new_vector < 0)
panic("%s: out of interrupt vectors!\n", __FUNCTION__);
- printk(KERN_INFO "Reassigning vector %d to %d\n", vector, new_vector);
+ printk(KERN_INFO "Reassigning vector %d to %d\n",
+ vector, new_vector);
memcpy(&iosapic_intr_info[new_vector], &iosapic_intr_info[vector],
sizeof(struct iosapic_intr_info));
INIT_LIST_HEAD(&iosapic_intr_info[new_vector].rtes);
- list_move(iosapic_intr_info[vector].rtes.next, &iosapic_intr_info[new_vector].rtes);
- memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info));
+ list_move(iosapic_intr_info[vector].rtes.next,
+ &iosapic_intr_info[new_vector].rtes);
+ memset(&iosapic_intr_info[vector], 0,
+ sizeof(struct iosapic_intr_info));
iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
}
@@ -524,7 +561,8 @@
int preallocated = 0;
if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
- rte = alloc_bootmem(sizeof(struct iosapic_rte_info) * NR_PREALLOCATE_RTE_ENTRIES);
+ rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
+ NR_PREALLOCATE_RTE_ENTRIES);
if (!rte)
return NULL;
for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
@@ -532,7 +570,8 @@
}
if (!list_empty(&free_rte_list)) {
- rte = list_entry(free_rte_list.next, struct iosapic_rte_info, rte_list);
+ rte = list_entry(free_rte_list.next, struct iosapic_rte_info,
+ rte_list);
list_del(&rte->rte_list);
preallocated++;
} else {
@@ -575,7 +614,8 @@
index = find_iosapic(gsi);
if (index < 0) {
- printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi);
+ printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
+ __FUNCTION__, gsi);
return -ENODEV;
}
@@ -586,7 +626,8 @@
if (!rte) {
rte = iosapic_alloc_rte();
if (!rte) {
- printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: cannot allocate memory\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -602,7 +643,9 @@
else if (vector_is_shared(vector)) {
struct iosapic_intr_info *info = &iosapic_intr_info[vector];
if (info->trigger != trigger || info->polarity != polarity) {
- printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__);
+ printk (KERN_WARNING
+ "%s: cannot override the interrupt\n",
+ __FUNCTION__);
return -EINVAL;
}
}
@@ -619,8 +662,10 @@
idesc = irq_descp(vector);
if (idesc->handler != irq_type) {
if (idesc->handler != &no_irq_type)
- printk(KERN_WARNING "%s: changing vector %d from %s to %s\n",
- __FUNCTION__, vector, idesc->handler->typename, irq_type->typename);
+ printk(KERN_WARNING
+ "%s: changing vector %d from %s to %s\n",
+ __FUNCTION__, vector,
+ idesc->handler->typename, irq_type->typename);
idesc->handler = irq_type;
}
return 0;
@@ -681,7 +726,7 @@
if (!num_cpus)
goto skip_numa_setup;
- /* Use vector assigment to distribute across cpus in node */
+ /* Use vector assignment to distribute across cpus in node */
cpu_index = vector % num_cpus;
for (numa_cpu = first_cpu(cpu_mask) ; i < cpu_index ; i++)
@@ -703,7 +748,7 @@
} while (!cpu_online(cpu));
return cpu_physical_id(cpu);
-#else
+#else /* CONFIG_SMP */
return cpu_physical_id(smp_processor_id());
#endif
}
@@ -755,7 +800,8 @@
if (list_empty(&iosapic_intr_info[vector].rtes))
free_irq_vector(vector);
spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_descp(vector)->lock, flags);
+ spin_unlock_irqrestore(&irq_descp(vector)->lock,
+ flags);
goto again;
}
@@ -764,7 +810,8 @@
polarity, trigger);
if (err < 0) {
spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_descp(vector)->lock, flags);
+ spin_unlock_irqrestore(&irq_descp(vector)->lock,
+ flags);
return err;
}
@@ -806,7 +853,8 @@
*/
irq = gsi_to_irq(gsi);
if (irq < 0) {
- printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", gsi);
+ printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n",
+ gsi);
WARN_ON(1);
return;
}
@@ -817,7 +865,9 @@
spin_lock(&iosapic_lock);
{
if ((rte = gsi_vector_to_rte(gsi, vector)) == NULL) {
- printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", gsi);
+ printk(KERN_ERR
+ "iosapic_unregister_intr(%u) unbalanced\n",
+ gsi);
WARN_ON(1);
goto out;
}
@@ -827,7 +877,8 @@
/* Mask the interrupt */
low32 = iosapic_intr_info[vector].low32 | IOSAPIC_MASK;
- iosapic_write(rte->addr, IOSAPIC_RTE_LOW(rte->rte_index), low32);
+ iosapic_write(rte->addr, IOSAPIC_RTE_LOW(rte->rte_index),
+ low32);
/* Remove the rte entry from the list */
list_del(&rte->rte_list);
@@ -840,7 +891,9 @@
trigger = iosapic_intr_info[vector].trigger;
polarity = iosapic_intr_info[vector].polarity;
dest = iosapic_intr_info[vector].dest;
- printk(KERN_INFO "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d unregistered\n",
+ printk(KERN_INFO
+ "GSI %u (%s, %s) -> CPU %d (0x%04x)"
+ " vector %d unregistered\n",
gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
cpu_logical_id(dest), dest, vector);
@@ -853,12 +906,15 @@
idesc->handler = &no_irq_type;
/* Clear the interrupt information */
- memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info));
+ memset(&iosapic_intr_info[vector], 0,
+ sizeof(struct iosapic_intr_info));
iosapic_intr_info[vector].low32 |= IOSAPIC_MASK;
INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
if (idesc->action) {
- printk(KERN_ERR "interrupt handlers still exist on IRQ %u\n", irq);
+ printk(KERN_ERR
+ "interrupt handlers still exist on"
+ "IRQ %u\n", irq);
WARN_ON(1);
}
@@ -873,7 +929,6 @@
/*
* ACPI calls this when it finds an entry for a platform interrupt.
- * Note that the irq_base and IOSAPIC address must be set in iosapic_init().
*/
int __init
iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
@@ -907,13 +962,16 @@
mask = 1;
break;
default:
- printk(KERN_ERR "iosapic_register_platform_irq(): invalid int type 0x%x\n", int_type);
+ printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+ int_type);
return -1;
}
register_intr(gsi, vector, delivery, polarity, trigger);
- printk(KERN_INFO "PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d\n",
+ printk(KERN_INFO
+ "PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x)"
+ " vector %d\n",
int_type < ARRAY_SIZE(name) ? name[int_type] : "unknown",
int_type, gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
@@ -923,10 +981,8 @@
return vector;
}
-
/*
* ACPI calls this when it finds an entry for a legacy ISA IRQ override.
- * Note that the gsi_base and IOSAPIC address must be set in iosapic_init().
*/
void __init
iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
@@ -955,16 +1011,19 @@
for (vector = 0; vector < IA64_NUM_VECTORS; ++vector) {
iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
- INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes); /* mark as unused */
+ /* mark as unused */
+ INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
}
pcat_compat = system_pcat_compat;
if (pcat_compat) {
/*
- * Disable the compatibility mode interrupts (8259 style), needs IN/OUT support
- * enabled.
+ * Disable the compatibility mode interrupts (8259 style),
+ * needs IN/OUT support enabled.
*/
- printk(KERN_INFO "%s: Disabling PC-AT compatible 8259 interrupts\n", __FUNCTION__);
+ printk(KERN_INFO
+ "%s: Disabling PC-AT compatible 8259 interrupts\n",
+ __FUNCTION__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
@@ -1004,10 +1063,7 @@
base = iosapic_lists[index].gsi_base;
end = base + iosapic_lists[index].num_rte - 1;
- if (gsi_base < base && gsi_end < base)
- continue;/* OK */
-
- if (gsi_base > end && gsi_end > end)
+ if (gsi_end < base || end < gsi_base)
continue; /* OK */
return -EBUSY;
@@ -1053,12 +1109,14 @@
if ((gsi_base == 0) && pcat_compat) {
/*
- * Map the legacy ISA devices into the IOSAPIC data. Some of these may
- * get reprogrammed later on with data from the ACPI Interrupt Source
- * Override table.
+ * Map the legacy ISA devices into the IOSAPIC data. Some of
+ * these may get reprogrammed later on with data from the ACPI
+ * Interrupt Source Override table.
*/
for (isa_irq = 0; isa_irq < 16; ++isa_irq)
- iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
+ iosapic_override_isa_irq(isa_irq, isa_irq,
+ IOSAPIC_POL_HIGH,
+ IOSAPIC_EDGE);
}
return 0;
}
@@ -1081,7 +1139,8 @@
if (iosapic_lists[index].rtes_inuse) {
err = -EBUSY;
- printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+ printk(KERN_WARNING
+ "%s: IOSAPIC for GSI base %u is busy\n",
__FUNCTION__, gsi_base);
goto out;
}
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 89faa60..6386f63 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -240,7 +240,7 @@
}
p += sprintf(p,
"%s Cache level %lu:\n"
- "\tSize : %lu bytes\n"
+ "\tSize : %u bytes\n"
"\tAttributes : ",
cache_types[j+cci.pcci_unified], i+1,
cci.pcci_cache_size);
@@ -648,9 +648,9 @@
if (ia64_pal_freq_ratios(&proc, &bus, &itc) != 0) return 0;
p += sprintf(p,
- "Processor/Clock ratio : %ld/%ld\n"
- "Bus/Clock ratio : %ld/%ld\n"
- "ITC/Clock ratio : %ld/%ld\n",
+ "Processor/Clock ratio : %d/%d\n"
+ "Bus/Clock ratio : %d/%d\n"
+ "ITC/Clock ratio : %d/%d\n",
proc.num, proc.den, bus.num, bus.den, itc.num, itc.den);
return p - page;
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index ac16743..4995890 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -188,7 +188,7 @@
itc_freq = (platform_base_freq*itc_ratio.num)/itc_ratio.den;
local_cpu_data->itm_delta = (itc_freq + HZ/2) / HZ;
- printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%lu/%lu, "
+ printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%u/%u, "
"ITC freq=%lu.%03luMHz", smp_processor_id(),
platform_base_freq / 1000000, (platform_base_freq / 1000) % 1000,
itc_ratio.num, itc_ratio.den, itc_freq / 1000000, (itc_freq / 1000) % 1000);
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 3b6fd79..b47476d 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -9,6 +9,8 @@
* 2002/08/07 Erich Focht <efocht@ess.nec.de>
* Populate cpu entries in sysfs for non-numa systems as well
* Intel Corporation - Ashok Raj
+ * 02/27/2006 Zhang, Yanmin
+ * Populate cpu cache entries in sysfs for cpu cache info
*/
#include <linux/config.h>
@@ -19,6 +21,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/nodemask.h>
+#include <linux/notifier.h>
#include <asm/mmzone.h>
#include <asm/numa.h>
#include <asm/cpu.h>
@@ -101,3 +104,367 @@
}
subsys_initcall(topology_init);
+
+
+/*
+ * Export cpu cache information through sysfs
+ */
+
+/*
+ * A bunch of string array to get pretty printing
+ */
+static const char *cache_types[] = {
+ "", /* not used */
+ "Instruction",
+ "Data",
+ "Unified" /* unified */
+};
+
+static const char *cache_mattrib[]={
+ "WriteThrough",
+ "WriteBack",
+ "", /* reserved */
+ "" /* reserved */
+};
+
+struct cache_info {
+ pal_cache_config_info_t cci;
+ cpumask_t shared_cpu_map;
+ int level;
+ int type;
+ struct kobject kobj;
+};
+
+struct cpu_cache_info {
+ struct cache_info *cache_leaves;
+ int num_cache_leaves;
+ struct kobject kobj;
+};
+
+static struct cpu_cache_info all_cpu_cache_info[NR_CPUS];
+#define LEAF_KOBJECT_PTR(x,y) (&all_cpu_cache_info[x].cache_leaves[y])
+
+#ifdef CONFIG_SMP
+static void cache_shared_cpu_map_setup( unsigned int cpu,
+ struct cache_info * this_leaf)
+{
+ pal_cache_shared_info_t csi;
+ int num_shared, i = 0;
+ unsigned int j;
+
+ if (cpu_data(cpu)->threads_per_core <= 1 &&
+ cpu_data(cpu)->cores_per_socket <= 1) {
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+ return;
+ }
+
+ if (ia64_pal_cache_shared_info(this_leaf->level,
+ this_leaf->type,
+ 0,
+ &csi) != PAL_STATUS_SUCCESS)
+ return;
+
+ num_shared = (int) csi.num_shared;
+ do {
+ for_each_cpu(j)
+ if (cpu_data(cpu)->socket_id == cpu_data(j)->socket_id
+ && cpu_data(j)->core_id == csi.log1_cid
+ && cpu_data(j)->thread_id == csi.log1_tid)
+ cpu_set(j, this_leaf->shared_cpu_map);
+
+ i++;
+ } while (i < num_shared &&
+ ia64_pal_cache_shared_info(this_leaf->level,
+ this_leaf->type,
+ i,
+ &csi) == PAL_STATUS_SUCCESS);
+}
+#else
+static void cache_shared_cpu_map_setup(unsigned int cpu,
+ struct cache_info * this_leaf)
+{
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+ return;
+}
+#endif
+
+static ssize_t show_coherency_line_size(struct cache_info *this_leaf,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", 1 << this_leaf->cci.pcci_line_size);
+}
+
+static ssize_t show_ways_of_associativity(struct cache_info *this_leaf,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", this_leaf->cci.pcci_assoc);
+}
+
+static ssize_t show_attributes(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf,
+ "%s\n",
+ cache_mattrib[this_leaf->cci.pcci_cache_attr]);
+}
+
+static ssize_t show_size(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf, "%uK\n", this_leaf->cci.pcci_cache_size / 1024);
+}
+
+static ssize_t show_number_of_sets(struct cache_info *this_leaf, char *buf)
+{
+ unsigned number_of_sets = this_leaf->cci.pcci_cache_size;
+ number_of_sets /= this_leaf->cci.pcci_assoc;
+ number_of_sets /= 1 << this_leaf->cci.pcci_line_size;
+
+ return sprintf(buf, "%u\n", number_of_sets);
+}
+
+static ssize_t show_shared_cpu_map(struct cache_info *this_leaf, char *buf)
+{
+ ssize_t len;
+ cpumask_t shared_cpu_map;
+
+ cpus_and(shared_cpu_map, this_leaf->shared_cpu_map, cpu_online_map);
+ len = cpumask_scnprintf(buf, NR_CPUS+1, shared_cpu_map);
+ len += sprintf(buf+len, "\n");
+ return len;
+}
+
+static ssize_t show_type(struct cache_info *this_leaf, char *buf)
+{
+ int type = this_leaf->type + this_leaf->cci.pcci_unified;
+ return sprintf(buf, "%s\n", cache_types[type]);
+}
+
+static ssize_t show_level(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf, "%u\n", this_leaf->level);
+}
+
+struct cache_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct cache_info *, char *);
+ ssize_t (*store)(struct cache_info *, const char *, size_t count);
+};
+
+#ifdef define_one_ro
+ #undef define_one_ro
+#endif
+#define define_one_ro(_name) \
+ static struct cache_attr _name = \
+__ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(ways_of_associativity);
+define_one_ro(size);
+define_one_ro(number_of_sets);
+define_one_ro(shared_cpu_map);
+define_one_ro(attributes);
+
+static struct attribute * cache_default_attrs[] = {
+ &type.attr,
+ &level.attr,
+ &coherency_line_size.attr,
+ &ways_of_associativity.attr,
+ &attributes.attr,
+ &size.attr,
+ &number_of_sets.attr,
+ &shared_cpu_map.attr,
+ NULL
+};
+
+#define to_object(k) container_of(k, struct cache_info, kobj)
+#define to_attr(a) container_of(a, struct cache_attr, attr)
+
+static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+ struct cache_attr *fattr = to_attr(attr);
+ struct cache_info *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->show ? fattr->show(this_leaf, buf) : 0;
+ return ret;
+}
+
+static struct sysfs_ops cache_sysfs_ops = {
+ .show = cache_show
+};
+
+static struct kobj_type cache_ktype = {
+ .sysfs_ops = &cache_sysfs_ops,
+ .default_attrs = cache_default_attrs,
+};
+
+static struct kobj_type cache_ktype_percpu_entry = {
+ .sysfs_ops = &cache_sysfs_ops,
+};
+
+static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu)
+{
+ if (all_cpu_cache_info[cpu].cache_leaves) {
+ kfree(all_cpu_cache_info[cpu].cache_leaves);
+ all_cpu_cache_info[cpu].cache_leaves = NULL;
+ }
+ all_cpu_cache_info[cpu].num_cache_leaves = 0;
+ memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject));
+
+ return;
+}
+
+static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu)
+{
+ u64 i, levels, unique_caches;
+ pal_cache_config_info_t cci;
+ int j;
+ s64 status;
+ struct cache_info *this_cache;
+ int num_cache_leaves = 0;
+
+ if ((status = ia64_pal_cache_summary(&levels, &unique_caches)) != 0) {
+ printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status);
+ return -1;
+ }
+
+ this_cache=kzalloc(sizeof(struct cache_info)*unique_caches,
+ GFP_KERNEL);
+ if (this_cache == NULL)
+ return -ENOMEM;
+
+ for (i=0; i < levels; i++) {
+ for (j=2; j >0 ; j--) {
+ if ((status=ia64_pal_cache_config_info(i,j, &cci)) !=
+ PAL_STATUS_SUCCESS)
+ continue;
+
+ this_cache[num_cache_leaves].cci = cci;
+ this_cache[num_cache_leaves].level = i + 1;
+ this_cache[num_cache_leaves].type = j;
+
+ cache_shared_cpu_map_setup(cpu,
+ &this_cache[num_cache_leaves]);
+ num_cache_leaves ++;
+ }
+ }
+
+ all_cpu_cache_info[cpu].cache_leaves = this_cache;
+ all_cpu_cache_info[cpu].num_cache_leaves = num_cache_leaves;
+
+ memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject));
+
+ return 0;
+}
+
+/* Add cache interface for CPU device */
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i, j;
+ struct cache_info *this_object;
+ int retval = 0;
+ cpumask_t oldmask;
+
+ if (all_cpu_cache_info[cpu].kobj.parent)
+ return 0;
+
+ oldmask = current->cpus_allowed;
+ retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (unlikely(retval))
+ return retval;
+
+ retval = cpu_cache_sysfs_init(cpu);
+ set_cpus_allowed(current, oldmask);
+ if (unlikely(retval < 0))
+ return retval;
+
+ all_cpu_cache_info[cpu].kobj.parent = &sys_dev->kobj;
+ kobject_set_name(&all_cpu_cache_info[cpu].kobj, "%s", "cache");
+ all_cpu_cache_info[cpu].kobj.ktype = &cache_ktype_percpu_entry;
+ retval = kobject_register(&all_cpu_cache_info[cpu].kobj);
+
+ for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
+ this_object = LEAF_KOBJECT_PTR(cpu,i);
+ this_object->kobj.parent = &all_cpu_cache_info[cpu].kobj;
+ kobject_set_name(&(this_object->kobj), "index%1lu", i);
+ this_object->kobj.ktype = &cache_ktype;
+ retval = kobject_register(&(this_object->kobj));
+ if (unlikely(retval)) {
+ for (j = 0; j < i; j++) {
+ kobject_unregister(
+ &(LEAF_KOBJECT_PTR(cpu,j)->kobj));
+ }
+ kobject_unregister(&all_cpu_cache_info[cpu].kobj);
+ cpu_cache_sysfs_exit(cpu);
+ break;
+ }
+ }
+ return retval;
+}
+
+/* Remove cache interface for CPU device */
+static int __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i;
+
+ for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++)
+ kobject_unregister(&(LEAF_KOBJECT_PTR(cpu,i)->kobj));
+
+ if (all_cpu_cache_info[cpu].kobj.parent) {
+ kobject_unregister(&all_cpu_cache_info[cpu].kobj);
+ memset(&all_cpu_cache_info[cpu].kobj,
+ 0,
+ sizeof(struct kobject));
+ }
+
+ cpu_cache_sysfs_exit(cpu);
+
+ return 0;
+}
+
+/*
+ * When a cpu is hot-plugged, do a check and initiate
+ * cache kobject if necessary
+ */
+static int __cpuinit cache_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ cache_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ cache_remove_dev(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cache_cpu_notifier =
+{
+ .notifier_call = cache_cpu_callback
+};
+
+static int __cpuinit cache_sysfs_init(void)
+{
+ int i;
+
+ for_each_online_cpu(i) {
+ cache_cpu_callback(&cache_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ register_cpu_notifier(&cache_cpu_notifier);
+
+ return 0;
+}
+
+device_initcall(cache_sysfs_init);
+
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 0b9e56d..783600f 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -70,6 +70,15 @@
__stop___ex_table = .;
}
+ /* MCA table */
+ . = ALIGN(16);
+ __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
+ {
+ __start___mca_table = .;
+ *(__mca_table)
+ __stop___mca_table = .;
+ }
+
/* Global data */
_data = .;
@@ -130,15 +139,6 @@
__initcall_end = .;
}
- /* MCA table */
- . = ALIGN(16);
- __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
- {
- __start___mca_table = .;
- *(__mca_table)
- __stop___mca_table = .;
- }
-
.data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
{
__start___vtop_patchlist = .;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 2ef1151..cafa877 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -109,6 +109,7 @@
{
unsigned long addr;
struct page *page;
+ unsigned long order;
if (!pte_exec(pte))
return; /* not an executable page... */
@@ -119,7 +120,12 @@
if (test_bit(PG_arch_1, &page->flags))
return; /* i-cache is already coherent with d-cache */
- flush_icache_range(addr, addr + PAGE_SIZE);
+ if (PageCompound(page)) {
+ order = (unsigned long) (page[1].lru.prev);
+ flush_icache_range(addr, addr + (1UL << order << PAGE_SHIFT));
+ }
+ else
+ flush_icache_range(addr, addr + PAGE_SIZE);
set_bit(PG_arch_1, &page->flags); /* mark page as clean */
}
diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c
index 6232862..643ccc6 100644
--- a/arch/ia64/mm/ioremap.c
+++ b/arch/ia64/mm/ioremap.c
@@ -21,12 +21,12 @@
void __iomem *
ioremap (unsigned long offset, unsigned long size)
{
- if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC))
- return __ioremap(offset, size);
-
if (efi_mem_attribute_range(offset, size, EFI_MEMORY_WB))
return phys_to_virt(offset);
+ if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC))
+ return __ioremap(offset, size);
+
/*
* Someday this should check ACPI resources so we
* can do the right thing for hot-plugged regions.
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 6a4eec9..4dbbca0 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -156,17 +156,19 @@
nbits = purge.max_bits;
start &= ~((1UL << nbits) - 1);
-# ifdef CONFIG_SMP
- platform_global_tlb_purge(mm, start, end, nbits);
-# else
preempt_disable();
+#ifdef CONFIG_SMP
+ if (mm != current->active_mm || cpus_weight(mm->cpu_vm_mask) != 1) {
+ platform_global_tlb_purge(mm, start, end, nbits);
+ preempt_enable();
+ return;
+ }
+#endif
do {
ia64_ptcl(start, (nbits<<2));
start += (1UL << nbits);
} while (start < end);
preempt_enable();
-# endif
-
ia64_srlz_i(); /* srlz.i implies srlz.d */
}
EXPORT_SYMBOL(flush_tlb_range);
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 70db21f..d917afa 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -110,7 +110,11 @@
if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab))
return -1;
- for_each_node(cnode) {
+ /*
+ * FIXME: replace with cleaner for_each_XXX macro which addresses
+ * both compute and IO nodes once ACPI3.0 is available.
+ */
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
geoid = cnodeid_get_geoid(cnode);
module_id = geo_module(geoid);
this_rack = MODULE_GET_RACK(module_id);
@@ -605,7 +609,7 @@
op_info->a->arg &= SN_HWPERF_ARG_OBJID_MASK;
if (cpu != SN_HWPERF_ARG_ANY_CPU) {
- if (cpu >= num_online_cpus() || !cpu_online(cpu)) {
+ if (cpu >= NR_CPUS || !cpu_online(cpu)) {
r = -EINVAL;
goto out;
}
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 3d7f200..c331951 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -79,4 +79,3 @@
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c
index d844c75..f9b4ea1 100644
--- a/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/arch/m68knommu/kernel/m68k_ksyms.c
@@ -57,8 +57,6 @@
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a8f435d..c66db5e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -419,4 +419,3 @@
return pc;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 6b3c509..2fdf219 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -177,14 +177,10 @@
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
+source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
source "mm/Kconfig"
-config PREEMPT
- bool
-# bool "Preemptible Kernel"
- default n
-
config COMPAT
def_bool y
depends on 64BIT
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 3e013f5..41fd069 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:04:34 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 19:59:51 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,14 +10,11 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -32,17 +29,18 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -51,8 +49,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -66,6 +66,23 @@
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
# CONFIG_PA7000 is not set
@@ -75,6 +92,10 @@
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -86,7 +107,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
@@ -130,6 +151,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -165,7 +187,12 @@
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -182,64 +209,6 @@
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@@ -250,6 +219,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -263,8 +237,11 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -304,6 +281,7 @@
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
@@ -314,7 +292,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -325,14 +302,6 @@
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
@@ -376,6 +345,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
@@ -407,7 +377,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -471,6 +440,7 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@@ -516,8 +486,8 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL_OLD=y
-# CONFIG_KEYBOARD_HIL is not set
+# CONFIG_KEYBOARD_HIL_OLD is not set
+CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
@@ -554,6 +524,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=17
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -598,6 +569,8 @@
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -605,6 +578,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -640,7 +619,6 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@@ -655,6 +633,7 @@
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
@@ -695,6 +674,8 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -724,6 +705,10 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -736,10 +721,9 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -765,6 +749,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -800,10 +785,10 @@
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -821,7 +806,6 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
@@ -917,18 +901,22 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 959ad3c..f3b812f 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1031,8 +1031,8 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 37e9824..3509361 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -939,10 +939,10 @@
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -962,8 +962,8 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -973,10 +973,10 @@
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
#
# Kernel hacking
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 0b1c8c1..782906b 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:06:31 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 20:03:29 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,14 +10,11 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -32,28 +29,30 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -67,6 +66,23 @@
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
# CONFIG_PA7000 is not set
@@ -78,6 +94,10 @@
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -89,7 +109,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HPUX is not set
#
@@ -135,6 +155,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -175,7 +196,12 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -192,87 +218,11 @@
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_MARK is not set
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -283,6 +233,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -295,8 +250,11 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -341,7 +299,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -355,14 +312,6 @@
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -458,6 +407,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -466,7 +416,6 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
@@ -476,18 +425,18 @@
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
@@ -496,18 +445,11 @@
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -633,6 +575,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
@@ -668,6 +611,7 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
@@ -744,6 +688,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -753,7 +698,6 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -788,6 +732,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -795,6 +740,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -830,7 +781,6 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
@@ -840,6 +790,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -853,10 +804,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -866,6 +814,7 @@
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
@@ -898,23 +847,27 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -923,39 +876,38 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -998,12 +950,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1015,12 +970,15 @@
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1034,6 +992,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1108,7 +1067,7 @@
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -1130,6 +1089,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1164,10 +1124,10 @@
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1225,10 +1185,10 @@
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -1248,8 +1208,8 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -1259,10 +1219,10 @@
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
#
# Profiling support
@@ -1274,18 +1234,22 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index f38a462..59f7bc3 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:01:33 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 19:50:07 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -15,7 +15,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -30,17 +29,18 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -49,8 +49,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -58,6 +60,23 @@
# CONFIG_MODULES is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_PA7000=y
@@ -67,6 +86,10 @@
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -78,7 +101,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
@@ -132,6 +155,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -174,6 +198,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -186,8 +215,11 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -228,6 +260,7 @@
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
@@ -254,14 +287,6 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -305,6 +330,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -331,7 +357,7 @@
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
@@ -340,13 +366,7 @@
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
@@ -471,6 +491,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -562,13 +583,13 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL_OLD=y
+# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_HIL is not set
+CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
@@ -628,6 +649,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -675,6 +697,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -682,6 +705,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -691,6 +720,7 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -718,7 +748,6 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
@@ -728,6 +757,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -741,9 +771,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -753,15 +781,28 @@
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -781,23 +822,27 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -806,39 +851,38 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -888,14 +932,18 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -918,6 +966,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -994,7 +1043,7 @@
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -1011,6 +1060,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1045,6 +1095,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1151,18 +1202,22 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index d8a4ca0..360b739 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -89,7 +89,7 @@
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
- flush_kernel_dcache_page(page_address(page));
+ flush_kernel_dcache_page(page);
clear_bit(PG_dcache_dirty, &page->flags);
}
}
@@ -278,7 +278,7 @@
return;
}
- flush_kernel_dcache_page(page_address(page));
+ flush_kernel_dcache_page(page);
if (!mapping)
return;
@@ -317,7 +317,7 @@
/* Defined in arch/parisc/kernel/pacache.S */
EXPORT_SYMBOL(flush_kernel_dcache_range_asm);
-EXPORT_SYMBOL(flush_kernel_dcache_page);
+EXPORT_SYMBOL(flush_kernel_dcache_page_asm);
EXPORT_SYMBOL(flush_data_cache_local);
EXPORT_SYMBOL(flush_kernel_icache_range_asm);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 9af4b22..7c95d76 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -563,10 +563,10 @@
extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0
depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */
- /* Get rid of prot bits and convert to page addr for iitlbt */
+ /* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */
depd %r0,63,PAGE_SHIFT,\pte
- extrd,u \pte,56,32,\pte
+ extrd,s \pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte
.endm
/* Identical macro to make_insert_tlb above, except it
@@ -584,7 +584,7 @@
/* Get rid of prot bits and convert to page addr for iitlba */
- depi 0,31,12,\pte
+ depi 0,31,PAGE_SHIFT,\pte
extru \pte,24,25,\pte
.endm
@@ -1014,14 +1014,21 @@
nop
nop
+#ifndef CONFIG_PREEMPT
+# define intr_do_preempt intr_restore
+#endif /* !CONFIG_PREEMPT */
+
.import schedule,code
intr_do_resched:
- /* Only do reschedule if we are returning to user space */
+ /* Only call schedule on return to userspace. If we're returning
+ * to kernel space, we may schedule if CONFIG_PREEMPT, otherwise
+ * we jump back to intr_restore.
+ */
LDREG PT_IASQ0(%r16), %r20
- CMPIB= 0,%r20,intr_restore /* backward */
+ CMPIB= 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
- CMPIB= 0,%r20,intr_restore /* backward */
+ CMPIB= 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
@@ -1037,6 +1044,32 @@
#endif
ldo R%intr_check_sig(%r2), %r2
+ /* preempt the current task on returning to kernel
+ * mode from an interrupt, iff need_resched is set,
+ * and preempt_count is 0. otherwise, we continue on
+ * our merry way back to the current running task.
+ */
+#ifdef CONFIG_PREEMPT
+ .import preempt_schedule_irq,code
+intr_do_preempt:
+ rsm PSW_SM_I, %r0 /* disable interrupts */
+
+ /* current_thread_info()->preempt_count */
+ mfctl %cr30, %r1
+ LDREG TI_PRE_COUNT(%r1), %r19
+ CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
+ nop /* prev insn branched backwards */
+
+ /* check if we interrupted a critical path */
+ LDREG PT_PSW(%r16), %r20
+ bb,<,n %r20, 31 - PSW_SM_I, intr_restore
+ nop
+
+ BL preempt_schedule_irq, %r2
+ nop
+
+ b intr_restore /* ssm PSW_SM_I done by intr_restore */
+#endif /* CONFIG_PREEMPT */
.import do_signal,code
intr_do_signal:
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 9534ee1..7a4f07e 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -621,9 +621,9 @@
.procend
- .export flush_kernel_dcache_page
+ .export flush_kernel_dcache_page_asm
-flush_kernel_dcache_page:
+flush_kernel_dcache_page_asm:
.proc
.callinfo NO_CALLS
.entry
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 1d00c36..47ca5c0 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -30,22 +30,7 @@
#include <linux/syscalls.h>
#include <linux/string.h>
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
#include <asm/atomic.h>
@@ -82,16 +67,12 @@
#endif
#include <asm/io.h>
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(memcpy_toio);
EXPORT_SYMBOL(memcpy_fromio);
EXPORT_SYMBOL(memset_io);
#include <asm/unistd.h>
-EXPORT_SYMBOL(sys_open);
EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_read);
EXPORT_SYMBOL(sys_write);
#include <asm/semaphore.h>
diff --git a/arch/parisc/kernel/pdc_chassis.c b/arch/parisc/kernel/pdc_chassis.c
index 0cea695..a45e2e2 100644
--- a/arch/parisc/kernel/pdc_chassis.c
+++ b/arch/parisc/kernel/pdc_chassis.c
@@ -5,9 +5,8 @@
* Copyright (C) 2002-2004 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 53f861c..ac8ee20 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -805,7 +805,7 @@
return -1;
}
- runway = ioremap(cpu_device->hpa.start, 4096);
+ runway = ioremap_nocache(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 89b6c56..bbeeb61 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -287,7 +287,7 @@
ENTRY_SAME(chown) /* 180 */
/* setsockopt() used by iptables: SO_SET_REPLACE/SO_SET_ADD_COUNTERS */
ENTRY_COMP(setsockopt)
- ENTRY_SAME(getsockopt)
+ ENTRY_COMP(getsockopt)
ENTRY_COMP(sendmsg)
ENTRY_COMP(recvmsg)
ENTRY_SAME(semop) /* 185 */
diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c
index 01bec8f..f4a8116 100644
--- a/arch/parisc/lib/iomap.c
+++ b/arch/parisc/lib/iomap.c
@@ -263,11 +263,7 @@
const struct iomap_ops *iomap_ops[8] = {
[0] = &ioport_ops,
-#ifdef CONFIG_DEBUG_IOREMAP
- [6] = &iomem_ops,
-#else
[7] = &iomem_ops
-#endif
};
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 852eda3..3796be6 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -1013,9 +1013,9 @@
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
-#if 0
- if (start < end)
- printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ if (start >= end)
+ return;
+ printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
@@ -1023,6 +1023,5 @@
num_physpages++;
totalram_pages++;
}
-#endif
}
#endif
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index edd9a95..0db1281 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -72,7 +72,6 @@
return 0;
}
-#if USE_HPPA_IOREMAP
static int
remap_area_pages(unsigned long address, unsigned long phys_addr,
unsigned long size, unsigned long flags)
@@ -114,31 +113,6 @@
return error;
}
-#endif /* USE_HPPA_IOREMAP */
-
-#ifdef CONFIG_DEBUG_IOREMAP
-static unsigned long last = 0;
-
-void gsc_bad_addr(unsigned long addr)
-{
- if (time_after(jiffies, last + HZ*10)) {
- printk("gsc_foo() called with bad address 0x%lx\n", addr);
- dump_stack();
- last = jiffies;
- }
-}
-EXPORT_SYMBOL(gsc_bad_addr);
-
-void __raw_bad_addr(const volatile void __iomem *addr)
-{
- if (time_after(jiffies, last + HZ*10)) {
- printk("__raw_foo() called with bad address 0x%p\n", addr);
- dump_stack();
- last = jiffies;
- }
-}
-EXPORT_SYMBOL(__raw_bad_addr);
-#endif
/*
* Generic mapping function (not visible outside):
@@ -154,26 +128,19 @@
*/
void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
{
-#if !(USE_HPPA_IOREMAP)
-
- unsigned long end = phys_addr + size - 1;
- /* Support EISA addresses */
- if ((phys_addr >= 0x00080000 && end < 0x000fffff)
- || (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
- phys_addr |= 0xfc000000;
- }
-
-#ifdef CONFIG_DEBUG_IOREMAP
- return (void __iomem *)(phys_addr - (0x1UL << NYBBLE_SHIFT));
-#else
- return (void __iomem *)phys_addr;
-#endif
-
-#else
void *addr;
struct vm_struct *area;
unsigned long offset, last_addr;
+#ifdef CONFIG_EISA
+ unsigned long end = phys_addr + size - 1;
+ /* Support EISA addresses */
+ if ((phys_addr >= 0x00080000 && end < 0x000fffff) ||
+ (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
+ phys_addr |= F_EXTEND(0xfc000000);
+ }
+#endif
+
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
@@ -217,15 +184,12 @@
}
return (void __iomem *) (offset + (char *)addr);
-#endif
}
+EXPORT_SYMBOL(__ioremap);
void iounmap(void __iomem *addr)
{
-#if !(USE_HPPA_IOREMAP)
- return;
-#else
if (addr > high_memory)
return vfree((void *) (PAGE_MASK & (unsigned long __force) addr));
-#endif
}
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a433b71..2cdc35c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -491,7 +491,7 @@
If in doubt, say Y here.
config TAU
- bool "Thermal Management Support"
+ bool "On-chip CPU temperature sensor support"
depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
@@ -500,7 +500,7 @@
on-die temperature in /proc/cpuinfo if the cpu supports it.
Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in some cases, does not work at all, so don't assume the cpu
+ and in many cases, does not work at all, so don't assume the cpu
temp is actually what /proc/cpuinfo says it is.
config TAU_INT
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 9254806..8d48e9e 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -110,11 +110,6 @@
depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
PPC_GEN550 || PPC_MPC52xx
-config PPC_OCP
- bool
- depends on IBM_OCP || XILINX_OCP
- default y
-
choice
prompt "Early debugging (dangerous)"
bool
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 829e017..6ec84d3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -129,13 +129,8 @@
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
-core-$(CONFIG_PPC32) += arch/ppc/kernel/
-core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
-core-$(CONFIG_APUS) += arch/ppc/amiga/
-drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 3c2acab..fe22e54 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:48 2006
+# Linux kernel version: 2.6.16
+# Thu Mar 23 20:48:09 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -30,6 +30,7 @@
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
@@ -51,7 +52,8 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -85,7 +87,7 @@
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
@@ -130,7 +132,8 @@
#
# Cell Broadband Engine options
#
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
+CONFIG_SPUFS_MMAP=y
#
# Kernel options
@@ -144,7 +147,7 @@
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_KEXEC=y
@@ -155,13 +158,16 @@
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@@ -232,6 +238,7 @@
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -244,25 +251,7 @@
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -278,51 +267,13 @@
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -355,7 +306,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -408,7 +358,7 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -484,7 +434,23 @@
#
# Multi-device support (RAID and LVM)
#
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
@@ -548,7 +514,7 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
+CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
@@ -560,7 +526,7 @@
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=y
+CONFIG_SPIDER_NET=m
# CONFIG_MV643XX_ETH is not set
#
@@ -678,6 +644,8 @@
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
#
# IPMI
@@ -694,14 +662,13 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
+CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -833,6 +800,7 @@
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
@@ -852,7 +820,14 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1037,10 +1012,6 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@@ -1058,7 +1029,7 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig
index 2a8290e..7f0780f 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version:
-# Sat Jan 14 15:57:54 2006
+# Linux kernel version: 2.6.16
+# Mon Mar 27 23:37:36 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -9,6 +9,7 @@
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -18,6 +19,7 @@
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
@@ -42,7 +44,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -58,6 +59,7 @@
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
@@ -72,10 +74,6 @@
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -90,6 +88,8 @@
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -183,6 +183,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -220,6 +221,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -229,11 +235,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -487,6 +488,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -496,6 +503,7 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -503,10 +511,6 @@
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -531,6 +535,7 @@
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -551,7 +556,7 @@
#
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -603,7 +608,6 @@
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -658,6 +662,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -695,6 +700,8 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 80e9fe2..0cc0995 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,12 +12,12 @@
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
- init_task.o process.o systbl.o
+ init_task.o process.o systbl.o idle.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o cpu_setup_power4.o \
- firmware.o sysfs.o idle_64.o
+ firmware.o sysfs.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@@ -34,6 +34,11 @@
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
+obj-$(CONFIG_TAU) += tau_6xx.o
+obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
+obj32-$(CONFIG_MODULES) += module_32.o
+obj-$(CONFIG_E500) += perfmon_fsl_booke.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -51,7 +56,6 @@
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
-obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
@@ -77,6 +81,7 @@
endif
+obj-$(CONFIG_PPC32) += $(obj32-y)
obj-$(CONFIG_PPC64) += $(obj64-y)
extra-$(CONFIG_PPC_FPU) += fpu.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 882889b..54b48f3 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -105,8 +105,6 @@
DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
- DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
-
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
similarity index 100%
rename from arch/ppc/kernel/cpu_setup_6xx.S
rename to arch/powerpc/kernel/cpu_setup_6xx.S
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 211d726..764d073 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -61,7 +61,7 @@
if (p)
elfcorehdr_addr = memparse(p, &p);
- return 0;
+ return 1;
}
__setup("elfcorehdr=", parse_elfcorehdr);
#endif
@@ -71,7 +71,7 @@
if (p)
saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
- return 0;
+ return 1;
}
__setup("savemaxmem=", parse_savemaxmem);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4827ca1..b3a9794 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -135,10 +135,10 @@
mfspr r11,SPRN_HID0
mtcr r11
BEGIN_FTR_SECTION
- bt- 8,power_save_6xx_restore /* Check DOZE */
+ bt- 8,4f /* Check DOZE */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
- bt- 9,power_save_6xx_restore /* Check NAP */
+ bt- 9,4f /* Check NAP */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@
SYNC
RFI /* jump to handler, enable MMU */
+#ifdef CONFIG_6xx
+4: b power_save_6xx_restore
+#endif
+
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 1060155..19ad5c6 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -617,6 +617,12 @@
mfsrr1 r10
std r10,_SRR1(r1)
+ /* Temporary workaround to clear CR until RTAS can be modified to
+ * ignore all bits.
+ */
+ li r0,0
+ mtcr r0
+
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index 4d37a3c..0bfe906 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -14,7 +14,9 @@
*/
#include <linux/config.h>
+#include <linux/module.h>
#include <asm/firmware.h>
-unsigned long ppc64_firmware_features;
+unsigned long powerpc_firmware_features;
+EXPORT_SYMBOL_GPL(powerpc_firmware_features);
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 35084f3..a5ae04a 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1544,7 +1544,11 @@
mr r28,r6
mr r27,r7
- /* Align the stack to 16-byte boundary for broken yaboot */
+ /*
+ * Align the stack to 16-byte boundary
+ * Depending on the size and layout of the ELF sections in the initial
+ * boot binary, the stack pointer will be unalignet on PowerMac
+ */
rldicr r1,r1,0,59
/* Make sure we are running in 64 bits mode */
@@ -1847,21 +1851,6 @@
bl .__save_cpu_setup
sync
- /* Setup a valid physical PACA pointer in SPRG3 for early_setup
- * note that boot_cpuid can always be 0 nowadays since there is
- * nowhere it can be initialized differently before we reach this
- * code
- */
- LOAD_REG_IMMEDIATE(r27, boot_cpuid)
- add r27,r27,r26
- lwz r27,0(r27)
-
- LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */
- mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r24 /* for this processor. */
- add r13,r13,r26 /* convert to physical addr */
- mtspr SPRN_SPRG3,r13
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
@@ -1930,6 +1919,17 @@
/* Not reached */
BUG_OPCODE
+/* Put the paca pointer into r13 and SPRG3 */
+_GLOBAL(setup_boot_paca)
+ LOAD_REG_IMMEDIATE(r3, boot_cpuid)
+ lwz r3,0(r3)
+ LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
+ mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */
+ add r13,r3,r4 /* for this processor. */
+ mtspr SPRN_SPRG3,r13
+
+ blr
+
/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the bss, which is page-aligned.
diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle.c
similarity index 64%
rename from arch/powerpc/kernel/idle_64.c
rename to arch/powerpc/kernel/idle.c
index b879d30..e9f321d 100644
--- a/arch/powerpc/kernel/idle_64.c
+++ b/arch/powerpc/kernel/idle.c
@@ -2,13 +2,17 @@
* Idle daemon for PowerPC. Idle daemon will handle any action
* that needs to be taken when the system becomes idle.
*
- * Originally Written by Cort Dougan (cort@cs.nmt.edu)
+ * Originally written by Cort Dougan (cort@cs.nmt.edu).
+ * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
+ * Paul Mackerras and others.
*
* iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
*
* Additional shared processor, SMT, and firmware support
* Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
*
+ * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -29,18 +33,43 @@
#include <asm/machdep.h>
#include <asm/smp.h>
-extern void power4_idle(void);
+#ifdef CONFIG_HOTPLUG_CPU
+#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
+ system_state == SYSTEM_RUNNING)
+#else
+#define cpu_should_die() 0
+#endif
-void default_idle(void)
+/*
+ * The body of the idle task.
+ */
+void cpu_idle(void)
{
- unsigned int cpu = smp_processor_id();
+ if (ppc_md.idle_loop)
+ ppc_md.idle_loop(); /* doesn't return */
+
set_thread_flag(TIF_POLLING_NRFLAG);
-
while (1) {
- if (!need_resched()) {
- while (!need_resched() && !cpu_is_offline(cpu)) {
- ppc64_runlatch_off();
+ ppc64_runlatch_off();
+ while (!need_resched() && !cpu_should_die()) {
+ if (ppc_md.power_save) {
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ /*
+ * smp_mb is so clearing of TIF_POLLING_NRFLAG
+ * is ordered w.r.t. need_resched() test.
+ */
+ smp_mb();
+ local_irq_disable();
+
+ /* check again after disabling irqs */
+ if (!need_resched() && !cpu_should_die())
+ ppc_md.power_save();
+
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ } else {
/*
* Go into low thread priority and possibly
* low power mode.
@@ -48,46 +77,18 @@
HMT_low();
HMT_very_low();
}
-
- HMT_medium();
}
+ HMT_medium();
ppc64_runlatch_on();
+ if (cpu_should_die())
+ cpu_die();
preempt_enable_no_resched();
schedule();
preempt_disable();
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
}
}
-void native_idle(void)
-{
- while (1) {
- ppc64_runlatch_off();
-
- if (!need_resched())
- power4_idle();
-
- if (need_resched()) {
- ppc64_runlatch_on();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
- }
-
- if (cpu_is_offline(smp_processor_id()) &&
- system_state == SYSTEM_RUNNING)
- cpu_die();
- }
-}
-
-void cpu_idle(void)
-{
- BUG_ON(NULL == ppc_md.idle_loop);
- ppc_md.idle_loop();
-}
-
int powersave_nap;
#ifdef CONFIG_SYSCTL
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 444fdcc..12a4efb 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -87,19 +87,6 @@
cmpwi 0,r3,0
beqlr
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
/* Some pre-nap cleanups needed on some CPUs */
andis. r0,r3,HID0_NAP@h
beq 2f
@@ -157,7 +144,8 @@
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
+ mfmsr r7
+ ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
@@ -220,8 +208,6 @@
_GLOBAL(nap_save_hid1)
.space 4*NR_CPUS
-_GLOBAL(powersave_nap)
- .long 0
_GLOBAL(powersave_lowspeed)
.long 0
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index c16b4af..6dad1c0 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -1,11 +1,5 @@
/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
+ * This file contains the power_save function for 970-family CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -26,49 +20,23 @@
.text
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
_GLOBAL(power4_idle)
BEGIN_FTR_SECTION
blr
END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- LOAD_REG_ADDRBASE(r3,cur_cpu_spec)
- ld r4,ADDROFF(cur_cpu_spec)(r3)
- ld r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beqlr
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
- /* Clear MSR:EE */
- mfmsr r7
- li r4,0
- ori r4,r4,MSR_EE
- andc r0,r7,r4
- mtmsrd r0
-
- /* Check current_thread_info()->flags */
- clrrdi r4,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsrd r7 /* out of line this ? */
- blr
-1:
/* Go to NAP now */
BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ mfmsr r7
+ ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 771a59c..bb5c950 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -379,7 +379,7 @@
struct thread_info *tp;
int i;
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
tp = softirq_ctx[i];
tp->cpu = i;
diff --git a/arch/ppc/kernel/l2cr.S b/arch/powerpc/kernel/l2cr_6xx.S
similarity index 100%
rename from arch/ppc/kernel/l2cr.S
rename to arch/powerpc/kernel/l2cr_6xx.S
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index c7a799a..6e67b5b 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -37,7 +37,7 @@
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
- unsigned int flags)
+ upf_t flags)
{
u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
@@ -113,7 +113,7 @@
{
phys_addr_t addr;
u32 *addrp;
- unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
@@ -236,6 +236,23 @@
}
#endif
+static void __init setup_legacy_serial_console(int console)
+{
+ struct legacy_serial_info *info =
+ &legacy_serial_infos[console];
+ void __iomem *addr;
+
+ if (info->taddr == 0)
+ return;
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ return;
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(addr, info->clock);
+ DBG("default console speed = %d\n", info->speed);
+ udbg_init_uart(addr, info->speed, info->clock);
+}
+
/*
* This is called very early, as part of setup_system() or eventually
* setup_arch(), basically before anything else in this file. This function
@@ -318,25 +335,8 @@
#endif
DBG("legacy_serial_console = %d\n", legacy_serial_console);
-
- /* udbg is 64 bits only for now, that will change soon though ... */
- while (legacy_serial_console >= 0) {
- struct legacy_serial_info *info =
- &legacy_serial_infos[legacy_serial_console];
- void __iomem *addr;
-
- if (info->taddr == 0)
- break;
- addr = ioremap(info->taddr, 0x1000);
- if (addr == NULL)
- break;
- if (info->speed == 0)
- info->speed = udbg_probe_uart_speed(addr, info->clock);
- DBG("default console speed = %d\n", info->speed);
- udbg_init_uart(addr, info->speed, info->clock);
- break;
- }
-
+ if (legacy_serial_console >= 0)
+ setup_legacy_serial_console(legacy_serial_console);
DBG(" <- find_legacy_serial_port()\n");
}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index e789fef..1b73508 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -56,7 +56,7 @@
unsigned long sum_purr = 0;
int cpu;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
sum_purr += lppaca[cpu].emulated_time_base;
#ifdef PURR_DEBUG
@@ -222,7 +222,7 @@
int cpu;
struct cpu_usage *cu;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
cu = &per_cpu(cpu_usage_array, cpu);
sum_purr += cu->current_tb;
}
diff --git a/arch/ppc/kernel/module.c b/arch/powerpc/kernel/module_32.c
similarity index 100%
rename from arch/ppc/kernel/module.c
rename to arch/powerpc/kernel/module_32.c
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index fd7db8d..ada50aa 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -160,7 +160,7 @@
case IOC_NVRAM_GET_OFFSET: {
int part, offset;
- if (_machine != PLATFORM_POWERMAC)
+ if (!machine_is(powermac))
return -EINVAL;
if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
return -EFAULT;
@@ -174,8 +174,9 @@
return 0;
}
#endif /* CONFIG_PPC_PMAC */
+ default:
+ return -EINVAL;
}
- return -EINVAL;
}
struct file_operations nvram_fops = {
@@ -443,7 +444,7 @@
* in our nvram, as Apple defined partitions use pretty much
* all of the space
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENOSPC;
/* see if we have an OS partition that meets our needs.
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 5d1b708..f505a88 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -56,14 +56,11 @@
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
-#define PACA_INIT_COMMON(number, start, asrr, asrv) \
+#define PACA_INIT_COMMON(number) \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
- .stab_real = (asrr), /* Real pointer to segment table */ \
- .stab_addr = (asrv), /* Virt pointer to segment table */ \
- .cpu_start = (start), /* Processor start */ \
.hw_cpu_id = 0xffff,
#ifdef CONFIG_PPC_ISERIES
@@ -72,30 +69,20 @@
#define PACA_INIT(number) \
{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
- PACA_INIT_ISERIES(number) \
-}
-
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \
+ PACA_INIT_COMMON(number) \
PACA_INIT_ISERIES(number) \
}
#else
#define PACA_INIT(number) \
{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
+ PACA_INIT_COMMON(number) \
}
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \
-}
#endif
struct paca_struct paca[] = {
- BOOTCPU_PACA_INIT(0),
+ PACA_INIT(0),
#if NR_CPUS > 1
PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3),
#if NR_CPUS > 4
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 704c846..b129d2e 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -787,7 +787,7 @@
* fix has to be done by making the remapping per-host and always
* filling the pci_to_OF map. --BenH
*/
- if (_machine == _MACH_Pmac && busnr >= 0xf0)
+ if (machine_is(powermac) && busnr >= 0xf0)
busnr -= 0xf0;
else
#endif
@@ -1728,7 +1728,7 @@
* (bus 0 is HT root), we return the AGP one instead.
*/
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+ if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
if (bus == 0)
bus = 0xf0;
#endif /* CONFIG_PPC_PMAC */
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ba92bab..4c4449b 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -78,6 +78,7 @@
/* Cached ISA bridge dev. */
struct pci_dev *ppc64_isabridge_dev = NULL;
+EXPORT_SYMBOL_GPL(ppc64_isabridge_dev);
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c
similarity index 100%
rename from arch/ppc/kernel/perfmon_fsl_booke.c
rename to arch/powerpc/kernel/perfmon_fsl_booke.c
diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c
index 7ba42a4..3c2cf66 100644
--- a/arch/powerpc/kernel/proc_ppc64.c
+++ b/arch/powerpc/kernel/proc_ppc64.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <asm/machdep.h>
#include <asm/vdso_datapage.h>
#include <asm/rtas.h>
#include <asm/uaccess.h>
@@ -51,7 +52,7 @@
if (!root)
return 1;
- if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
+ if (!machine_is(pseries) && !machine_is(cell))
return 0;
if (!proc_mkdir("rtas", root))
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f698aa7..2dd47d2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -45,6 +45,7 @@
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/time.h>
+#include <asm/syscalls.h>
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#endif
@@ -362,7 +363,11 @@
if (!(i % 8))
printk("\n");
- if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) {
+ /* We use __get_user here *only* to avoid an OOPS on a
+ * bad address because the pc *should* only be a
+ * kernel address.
+ */
+ if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) {
printk("XXXXXXXX ");
} else {
if (regs->nip == pc)
@@ -765,7 +770,7 @@
return error;
}
-static int validate_sp(unsigned long sp, struct task_struct *p,
+int validate_sp(unsigned long sp, struct task_struct *p,
unsigned long nbytes)
{
unsigned long stack_page = (unsigned long)task_stack_page(p);
@@ -803,6 +808,8 @@
#define FRAME_MARKER 2
#endif
+EXPORT_SYMBOL(validate_sp);
+
unsigned long get_wchan(struct task_struct *p)
{
unsigned long ip, sp;
@@ -827,7 +834,6 @@
} while (count++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
static int kstack_depth_to_print = 64;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index d63cd56..4336390 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -383,14 +383,14 @@
/* Apple uses bits in there in a different way, let's
* only keep the real sense bit on macs
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
sense &= 0x1;
np->intrs[intrcount].sense = map_mpic_senses[sense];
}
#ifdef CONFIG_PPC64
/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
- if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
+ if (machine_is(powermac) && ic && ic->parent) {
char *name = get_property(ic->parent, "name", NULL);
if (name && !strcmp(name, "u3"))
np->intrs[intrcount].line += 128;
@@ -570,6 +570,18 @@
return rc;
}
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while(*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
/**
* This function can be used within scan_flattened_dt callback to get
* access to properties
@@ -612,6 +624,25 @@
} while(1);
}
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char* cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
unsigned long align)
{
@@ -686,7 +717,7 @@
#ifdef DEBUG
if ((strlen(p) + l + 1) != allocl) {
DBG("%s: p: %d, l: %d, a: %d\n",
- pathp, strlen(p), l, allocl);
+ pathp, (int)strlen(p), l, allocl);
}
#endif
p += strlen(p);
@@ -854,35 +885,73 @@
DBG(" <- unflatten_device_tree()\n");
}
-
static int __init early_init_dt_scan_cpus(unsigned long node,
- const char *uname, int depth, void *data)
+ const char *uname, int depth,
+ void *data)
{
+ static int logical_cpuid = 0;
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+#ifdef CONFIG_ALTIVEC
u32 *prop;
- unsigned long size;
- char *type = of_get_flat_dt_prop(node, "device_type", &size);
+#endif
+ u32 *intserv;
+ int i, nthreads;
+ unsigned long len;
+ int found = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
- boot_cpuid = 0;
- boot_cpuid_phys = 0;
- if (initial_boot_params && initial_boot_params->version >= 2) {
- /* version 2 of the kexec param format adds the phys cpuid
- * of booted proc.
- */
- boot_cpuid_phys = initial_boot_params->boot_cpuid_phys;
+ /* Get physical cpuid */
+ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
+ if (intserv) {
+ nthreads = len / sizeof(int);
} else {
- /* Check if it's the boot-cpu, set it's hw index now */
- if (of_get_flat_dt_prop(node,
- "linux,boot-cpu", NULL) != NULL) {
- prop = of_get_flat_dt_prop(node, "reg", NULL);
- if (prop != NULL)
- boot_cpuid_phys = *prop;
- }
+ intserv = of_get_flat_dt_prop(node, "reg", NULL);
+ nthreads = 1;
}
- set_hard_smp_processor_id(0, boot_cpuid_phys);
+
+ /*
+ * Now see if any of these threads match our boot cpu.
+ * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+ */
+ for (i = 0; i < nthreads; i++) {
+ /*
+ * version 2 of the kexec param format adds the phys cpuid of
+ * booted proc.
+ */
+ if (initial_boot_params && initial_boot_params->version >= 2) {
+ if (intserv[i] ==
+ initial_boot_params->boot_cpuid_phys) {
+ found = 1;
+ break;
+ }
+ } else {
+ /*
+ * Check if it's the boot-cpu, set it's hw index now,
+ * unfortunately this format did not support booting
+ * off secondary threads.
+ */
+ if (of_get_flat_dt_prop(node,
+ "linux,boot-cpu", NULL) != NULL) {
+ found = 1;
+ break;
+ }
+ }
+
+#ifdef CONFIG_SMP
+ /* logical cpu id is always 0 on UP kernels */
+ logical_cpuid++;
+#endif
+ }
+
+ if (found) {
+ DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
+ intserv[i]);
+ boot_cpuid = logical_cpuid;
+ set_hard_smp_processor_id(boot_cpuid, intserv[i]);
+ }
#ifdef CONFIG_ALTIVEC
/* Check if we have a VMX and eventually update CPU features */
@@ -901,16 +970,10 @@
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_PPC_PSERIES
- /*
- * Check for an SMT capable CPU and set the CPU feature. We do
- * this by looking at the size of the ibm,ppc-interrupt-server#s
- * property
- */
- prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
- &size);
- cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
- if (prop && ((size / sizeof(u32)) > 1))
+ if (nthreads > 1)
cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+ else
+ cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
#endif
return 0;
@@ -919,7 +982,6 @@
static int __init early_init_dt_scan_chosen(unsigned long node,
const char *uname, int depth, void *data)
{
- u32 *prop;
unsigned long *lprop;
unsigned long l;
char *p;
@@ -930,14 +992,6 @@
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
- /* get platform type */
- prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
- if (prop == NULL)
- return 0;
-#ifdef CONFIG_PPC_MULTIPLATFORM
- _machine = *prop;
-#endif
-
#ifdef CONFIG_PPC64
/* check if iommu is forced on or off */
if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
@@ -964,15 +1018,15 @@
* set of RTAS infos now if available
*/
{
- u64 *basep, *entryp;
+ u64 *basep, *entryp, *sizep;
basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
- prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
- if (basep && entryp && prop) {
+ sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
+ if (basep && entryp && sizep) {
rtas.base = *basep;
rtas.entry = *entryp;
- rtas.size = *prop;
+ rtas.size = *sizep;
}
}
#endif /* CONFIG_PPC_RTAS */
@@ -1001,25 +1055,13 @@
if (strstr(cmd_line, "mem=")) {
char *p, *q;
- unsigned long maxmem = 0;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
- maxmem = simple_strtoul(q, &q, 0);
- if (*q == 'k' || *q == 'K') {
- maxmem <<= 10;
- ++q;
- } else if (*q == 'm' || *q == 'M') {
- maxmem <<= 20;
- ++q;
- } else if (*q == 'g' || *q == 'G') {
- maxmem <<= 30;
- ++q;
- }
+ memory_limit = memparse(q, &q);
}
- memory_limit = maxmem;
}
/* break now */
@@ -1755,7 +1797,7 @@
/* We don't support that function on PowerMac, at least
* not yet
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENODEV;
/* fix up new node's linux_phandle field */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 813c2cd..d66c5e7 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -180,6 +180,16 @@
static unsigned long __initdata prom_tce_alloc_end;
#endif
+/* Platforms codes are now obsolete in the kernel. Now only used within this
+ * file and ultimately gone too. Feel free to change them if you need, they
+ * are not shared with anything outside of this file anymore
+ */
+#define PLATFORM_PSERIES 0x0100
+#define PLATFORM_PSERIES_LPAR 0x0101
+#define PLATFORM_LPAR 0x0001
+#define PLATFORM_POWERMAC 0x0400
+#define PLATFORM_GENERIC 0x0500
+
static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
@@ -397,6 +407,11 @@
reason = PTRRELOC(reason);
#endif
prom_print(reason);
+ /* Do not call exit because it clears the screen on pmac
+ * it also causes some sort of double-fault on early pmacs */
+ if (RELOC(of_platform) == PLATFORM_POWERMAC)
+ asm("trap\n");
+
/* ToDo: should put up an SRC here on p/iSeries */
call_prom("exit", 0, 0);
@@ -1487,7 +1502,10 @@
int len, i = 0;
#ifdef CONFIG_PPC64
phandle rtas;
+ int x;
#endif
+
+ /* Look for a PowerMac */
len = prom_getprop(_prom->root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
@@ -1500,28 +1518,36 @@
if (strstr(p, RELOC("Power Macintosh")) ||
strstr(p, RELOC("MacRISC")))
return PLATFORM_POWERMAC;
-#ifdef CONFIG_PPC64
- if (strstr(p, RELOC("Momentum,Maple")))
- return PLATFORM_MAPLE;
- if (strstr(p, RELOC("IBM,CPB")))
- return PLATFORM_CELL;
-#endif
i += sl + 1;
}
}
#ifdef CONFIG_PPC64
+ /* If not a mac, try to figure out if it's an IBM pSeries or any other
+ * PAPR compliant platform. We assume it is if :
+ * - /device_type is "chrp" (please, do NOT use that for future
+ * non-IBM designs !
+ * - it has /rtas
+ */
+ len = prom_getprop(_prom->root, "model",
+ compat, sizeof(compat)-1);
+ if (len <= 0)
+ return PLATFORM_GENERIC;
+ compat[len] = 0;
+ if (strcmp(compat, "chrp"))
+ return PLATFORM_GENERIC;
+
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (PHANDLE_VALID(rtas)) {
- int x = prom_getproplen(rtas, "ibm,hypertas-functions");
- if (x != PROM_ERROR) {
- prom_printf("Hypertas detected, assuming LPAR !\n");
- return PLATFORM_PSERIES_LPAR;
- }
+ if (!PHANDLE_VALID(rtas))
+ return PLATFORM_GENERIC;
+ x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (x != PROM_ERROR) {
+ prom_printf("Hypertas detected, assuming LPAR !\n");
+ return PLATFORM_PSERIES_LPAR;
}
return PLATFORM_PSERIES;
#else
- return PLATFORM_CHRP;
+ return PLATFORM_GENERIC;
#endif
}
@@ -2029,7 +2055,6 @@
{
struct prom_t *_prom;
unsigned long hdr;
- u32 getprop_rval;
unsigned long offset = reloc_offset();
#ifdef CONFIG_PPC32
@@ -2060,6 +2085,12 @@
*/
prom_init_stdout();
+ /*
+ * Get default machine type. At this point, we do not differentiate
+ * between pSeries SMP and pSeries LPAR
+ */
+ RELOC(of_platform) = prom_find_machine_type();
+
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2069,15 +2100,6 @@
*/
prom_check_initrd(r3, r4);
- /*
- * Get default machine type. At this point, we do not differentiate
- * between pSeries SMP and pSeries LPAR
- */
- RELOC(of_platform) = prom_find_machine_type();
- getprop_rval = RELOC(of_platform);
- prom_setprop(_prom->chosen, "/chosen", "linux,platform",
- &getprop_rval, sizeof(getprop_rval));
-
#ifdef CONFIG_PPC_PSERIES
/*
* On pSeries, inform the firmware about our capabilities
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 1f03fb2..456286c 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -257,7 +257,7 @@
{
struct proc_dir_entry *entry;
- if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
+ if (!machine_is(pseries))
return 1;
rtas_node = of_find_node_by_name(NULL, "rtas");
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index b5b2add..06636c9 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -25,6 +25,7 @@
#include <asm/hvcall.h>
#include <asm/semaphore.h>
#include <asm/machdep.h>
+#include <asm/firmware.h>
#include <asm/page.h>
#include <asm/param.h>
#include <asm/system.h>
@@ -32,6 +33,7 @@
#include <asm/uaccess.h>
#include <asm/lmb.h>
#include <asm/udbg.h>
+#include <asm/syscalls.h>
struct rtas_t rtas = {
.lock = SPIN_LOCK_UNLOCKED
@@ -591,7 +593,7 @@
data->waiting = 0;
data->args->args[data->args->nargs] =
rtas_call(ibm_suspend_me_token, 0, 1, NULL);
- for_each_cpu(i)
+ for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD,i);
} else {
data->waiting = -EBUSY;
@@ -624,7 +626,7 @@
/* Prod each CPU. This won't hurt, and will wake
* anyone we successfully put to sleep with H_Join
*/
- for_each_cpu(i)
+ for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD, i);
return data.waiting;
@@ -767,7 +769,7 @@
* the stop-self token if any
*/
#ifdef CONFIG_PPC64
- if (_machine == PLATFORM_PSERIES_LPAR) {
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
ibm_suspend_me_token = rtas_token("ibm,suspend-me");
}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index c1d62bf..c607f3b 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -9,6 +9,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG
+
#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
@@ -41,6 +44,7 @@
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
+#include <asm/firmware.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
@@ -56,8 +60,6 @@
#include "setup.h"
-#undef DEBUG
-
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
@@ -65,10 +67,12 @@
#define DBG(fmt...)
#endif
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-#endif
+/* The main machine-dep calls structure
+ */
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+struct machdep_calls *machine_id;
+EXPORT_SYMBOL(machine_id);
unsigned long klimit = (unsigned long) _end;
@@ -168,7 +172,8 @@
bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
#endif /* CONFIG_SMP && CONFIG_PPC32 */
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
+ if (ppc_md.name)
+ seq_printf(m, "platform\t: %s\n", ppc_md.name);
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
@@ -352,12 +357,13 @@
* must be called before using this.
*
* While we're here, we may as well set the "physical" cpu ids in the paca.
+ *
+ * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
*/
void __init smp_setup_cpu_maps(void)
{
struct device_node *dn = NULL;
int cpu = 0;
- int swap_cpuid = 0;
while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
int *intserv;
@@ -376,30 +382,17 @@
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
cpu_set(cpu, cpu_present_map);
set_hard_smp_processor_id(cpu, intserv[j]);
-
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
cpu_set(cpu, cpu_possible_map);
cpu++;
}
}
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
#ifdef CONFIG_PPC64
/*
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
*/
- if (_machine == PLATFORM_PSERIES_LPAR &&
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
(dn = of_find_node_by_path("/rtas"))) {
int num_addr_cell, num_size_cell, maxcpus;
unsigned int *ireg;
@@ -438,7 +431,7 @@
/*
* Do the sibling map; assume only two threads per processor.
*/
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
cpu_set(cpu, cpu_sibling_map[cpu]);
if (cpu_has_feature(CPU_FTR_SMT))
cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
@@ -468,3 +461,34 @@
}
early_param("xmon", early_xmon);
#endif
+
+void probe_machine(void)
+{
+ extern struct machdep_calls __machine_desc_start;
+ extern struct machdep_calls __machine_desc_end;
+
+ /*
+ * Iterate all ppc_md structures until we find the proper
+ * one for the current machine type
+ */
+ DBG("Probing machine type ...\n");
+
+ for (machine_id = &__machine_desc_start;
+ machine_id < &__machine_desc_end;
+ machine_id++) {
+ DBG(" %s ...", machine_id->name);
+ memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
+ if (ppc_md.probe()) {
+ DBG(" match !\n");
+ break;
+ }
+ DBG("\n");
+ }
+ /* What can we do if we didn't find ? */
+ if (machine_id >= &__machine_desc_end) {
+ DBG("No suitable machine found !\n");
+ for (;;);
+ }
+
+ printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index dc2770d..a72bf5d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -53,9 +53,6 @@
extern void platform_init(void);
extern void bootx_init(unsigned long r4, unsigned long phys);
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
boot_infos_t *boot_infos;
struct ide_machdep_calls ppc_ide_md;
@@ -70,10 +67,6 @@
int have_of = 1;
#ifdef CONFIG_PPC_MULTIPLATFORM
-extern void prep_init(void);
-extern void pmac_init(void);
-extern void chrp_init(void);
-
dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
@@ -85,9 +78,6 @@
unsigned long vgacon_remap_base;
#endif
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
@@ -111,7 +101,7 @@
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
- memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
/*
* Identify the CPU type and fix up code sections
@@ -123,48 +113,6 @@
return KERNELBASE + offset;
}
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
- */
-void __init platform_init(void)
-{
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init();
- return;
- }
-#endif
-
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
- case _MACH_Pmac:
- pmac_init();
- break;
-#endif
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init();
- break;
-#endif
- }
-}
-#endif
/*
* Find out what kind of machine we're on and save any data we need
@@ -190,11 +138,17 @@
strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
- /* Base init based on machine type */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+ probe_machine();
+#else
+ /* Base init based on machine type. Obsoloete, please kill ! */
platform_init();
+#endif
#ifdef CONFIG_6xx
- ppc_md.power_save = ppc6xx_idle;
+ if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+ cpu_has_feature(CPU_FTR_CAN_NAP))
+ ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
@@ -272,7 +226,7 @@
if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
/* register CPU devices */
- for_each_cpu(i)
+ for_each_possible_cpu(i)
register_cpu(&cpu_devices[i], i, NULL);
/* call platform init */
@@ -352,12 +306,6 @@
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-#ifdef CONFIG_PPC_OCP
- /* Initialize OCP device list */
- ocp_early_init();
- if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
@@ -366,7 +314,4 @@
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e20c1fa..59aa92c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -73,7 +73,6 @@
int have_of = 1;
int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
dev_t boot_dev;
u64 ppc64_pft_size;
@@ -96,11 +95,6 @@
int icache_bsize;
int ucache_bsize;
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY;
#endif /* CONFIG_MAGIC_SYSRQ */
@@ -161,32 +155,6 @@
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls cell_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
- &pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
- &pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_CELL
- &cell_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
- &iseries_md,
-#endif
- NULL
-};
-
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
@@ -208,13 +176,10 @@
void __init early_setup(unsigned long dt_ptr)
{
- struct paca_struct *lpaca = get_paca();
- static struct machdep_calls **mach;
-
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
- DBG(" -> early_setup()\n");
+ DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
* Do early initializations using the flattened device
@@ -223,22 +188,16 @@
*/
early_init_devtree(__va(dt_ptr));
- /*
- * Iterate all ppc_md structures until we find the proper
- * one for the current machine type
- */
- DBG("Probing machine type for platform %x...\n", _machine);
+ /* Now we know the logical id of our boot cpu, setup the paca. */
+ setup_boot_paca();
- for (mach = machines; *mach; mach++) {
- if ((*mach)->probe(_machine))
- break;
- }
- /* What can we do if we didn't find ? */
- if (*mach == NULL) {
- DBG("No suitable machine found !\n");
- for (;;);
- }
- ppc_md = **mach;
+ /* Fix up paca fields required for the boot cpu */
+ get_paca()->cpu_start = 1;
+ get_paca()->stab_real = __pa((u64)&initial_stab);
+ get_paca()->stab_addr = (u64)&initial_stab;
+
+ /* Probe the machine type */
+ probe_machine();
#ifdef CONFIG_CRASH_DUMP
kdump_setup();
@@ -260,7 +219,7 @@
if (cpu_has_feature(CPU_FTR_SLB))
slb_initialize();
else
- stab_initialize(lpaca->stab_real);
+ stab_initialize(get_paca()->stab_real);
}
DBG(" <- early_setup()\n");
@@ -340,7 +299,7 @@
const char *dc, *ic;
/* Then read cache informations */
- if (_machine == PLATFORM_POWERMAC) {
+ if (machine_is(powermac)) {
dc = "d-cache-block-size";
ic = "i-cache-block-size";
} else {
@@ -484,7 +443,6 @@
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
printk("ppc64_interrupt_controller = 0x%ld\n",
ppc64_interrupt_controller);
- printk("platform = 0x%x\n", _machine);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
@@ -516,7 +474,7 @@
* interrupt stacks must be under 256MB, we cannot afford to take
* SLB misses on them.
*/
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
@@ -549,7 +507,7 @@
*/
limit = min(0x10000000UL, lmb.rmo_size);
- for_each_cpu(i)
+ for_each_possible_cpu(i)
paca[i].emergency_sp =
__va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}
@@ -602,12 +560,6 @@
ppc_md.setup_arch();
- /* Use the default idle loop if the platform hasn't provided one. */
- if (NULL == ppc_md.idle_loop) {
- ppc_md.idle_loop = default_idle;
- printk(KERN_INFO "Using default idle loop\n");
- }
-
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
@@ -672,7 +624,7 @@
size = PERCPU_ENOUGH_ROOM;
#endif
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size);
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d7a4e81..01e3c08 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -42,6 +42,7 @@
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
#include <asm/sigcontext.h>
#include <asm/vdso.h>
#ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 47f9103..27f65b9 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -33,6 +33,7 @@
#include <asm/pgtable.h>
#include <asm/unistd.h>
#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
#include <asm/vdso.h>
#define DEBUG_SIG 0
@@ -211,7 +212,7 @@
/* Default to using normal stack */
newsp = regs->gpr[1];
- if (ka->sa.sa_flags & SA_ONSTACK) {
+ if ((ka->sa.sa_flags & SA_ONSTACK) && current->sas_ss_size) {
if (! on_sig_stack(regs->gpr[1]))
newsp = (current->sas_ss_sp + current->sas_ss_size);
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 805eaed..530f7db 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -362,7 +362,7 @@
smp_space_timers(max_cpus);
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
if (cpu != boot_cpuid)
smp_create_idle(cpu);
}
diff --git a/arch/ppc/kernel/swsusp.S b/arch/powerpc/kernel/swsusp_32.S
similarity index 100%
rename from arch/ppc/kernel/swsusp.S
rename to arch/powerpc/kernel/swsusp_32.S
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index ad895c9..9b69d99 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -40,6 +40,7 @@
#include <asm/uaccess.h>
#include <asm/ipc.h>
#include <asm/semaphore.h>
+#include <asm/syscalls.h>
#include <asm/time.h>
#include <asm/unistd.h>
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 0f0c3a9..73560ef 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -65,20 +65,20 @@
unsigned int cpu;
if (!cpu_has_feature(CPU_FTR_SMT))
- return 1;
+ return -ENODEV;
options = find_path_device("/options");
if (!options)
- return 1;
+ return -ENODEV;
val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay",
NULL);
if (!smt_snooze_cmdline && val) {
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = *val;
}
- return 1;
+ return 0;
}
__initcall(smt_setup);
@@ -93,7 +93,7 @@
smt_snooze_cmdline = 1;
if (get_option(&str, &snooze)) {
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = snooze;
}
@@ -347,7 +347,7 @@
register_cpu_notifier(&sysfs_cpu_nb);
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
struct cpu *c = &per_cpu(cpu_devices, cpu);
#ifdef CONFIG_NUMA
diff --git a/arch/ppc/kernel/temp.c b/arch/powerpc/kernel/tau_6xx.c
similarity index 100%
rename from arch/ppc/kernel/temp.c
rename to arch/powerpc/kernel/tau_6xx.c
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 4a27218..24e3ad7 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -261,7 +261,7 @@
if (!cpu_has_feature(CPU_FTR_PURR))
return;
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock);
on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
}
@@ -751,7 +751,7 @@
* systems works better if the two threads' timebase interrupts
* are staggered by half a jiffy with respect to each other.
*/
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
if (i == boot_cpuid)
continue;
if (i == (boot_cpuid ^ 1))
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 9763faa..4cbde21 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -97,7 +97,6 @@
int die(const char *str, struct pt_regs *regs, long err)
{
static int die_counter, crash_dump_start = 0;
- int nl = 0;
if (debugger(regs))
return 1;
@@ -106,7 +105,7 @@
spin_lock_irq(&die_lock);
bust_spinlocks(1);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
set_backlight_enable(1);
set_backlight_level(BACKLIGHT_MAX);
}
@@ -114,46 +113,18 @@
printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
- nl = 1;
#endif
#ifdef CONFIG_SMP
printk("SMP NR_CPUS=%d ", NR_CPUS);
- nl = 1;
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
printk("DEBUG_PAGEALLOC ");
- nl = 1;
#endif
#ifdef CONFIG_NUMA
printk("NUMA ");
- nl = 1;
#endif
-#ifdef CONFIG_PPC64
- switch (_machine) {
- case PLATFORM_PSERIES:
- printk("PSERIES ");
- nl = 1;
- break;
- case PLATFORM_PSERIES_LPAR:
- printk("PSERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_ISERIES_LPAR:
- printk("ISERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_POWERMAC:
- printk("POWERMAC ");
- nl = 1;
- break;
- case PLATFORM_CELL:
- printk("CELL ");
- nl = 1;
- break;
- }
-#endif
- if (nl)
- printk("\n");
+ printk("%s\n", ppc_md.name ? "" : ppc_md.name);
+
print_modules();
show_regs(regs);
bust_spinlocks(0);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ec83703..573afb6 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -33,6 +33,7 @@
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/sections.h>
+#include <asm/firmware.h>
#include <asm/vdso.h>
#include <asm/vdso_datapage.h>
@@ -667,7 +668,13 @@
vdso_data->version.major = SYSTEMCFG_MAJOR;
vdso_data->version.minor = SYSTEMCFG_MINOR;
vdso_data->processor = mfspr(SPRN_PVR);
- vdso_data->platform = _machine;
+ /*
+ * Fake the old platform number for pSeries and iSeries and add
+ * in LPAR bit if necessary
+ */
+ vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ vdso_data->platform |= 1;
vdso_data->physicalMemorySize = lmb_phys_mem_size();
vdso_data->dcache_size = ppc64_caches.dsize;
vdso_data->dcache_line_size = ppc64_caches.dline_size;
diff --git a/arch/powerpc/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S
index e046427..0c6a37b 100644
--- a/arch/powerpc/kernel/vdso32/sigtramp.S
+++ b/arch/powerpc/kernel/vdso32/sigtramp.S
@@ -261,7 +261,7 @@
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -4 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/arch/powerpc/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S
index 31b604a..7479edb 100644
--- a/arch/powerpc/kernel/vdso64/sigtramp.S
+++ b/arch/powerpc/kernel/vdso64/sigtramp.S
@@ -263,7 +263,7 @@
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -8 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 7fa7b15..fe79c258 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -1,9 +1,11 @@
#include <linux/config.h>
#ifdef CONFIG_PPC64
#include <asm/page.h>
+#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
#define PAGE_SIZE 4096
#define KERNELBASE CONFIG_KERNEL_START
+#define PROVIDE32(x) PROVIDE(x)
#endif
#include <asm-generic/vmlinux.lds.h>
@@ -18,43 +20,42 @@
#endif
SECTIONS
{
- /* Sections to be discarded. */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.exit.data)
- }
+ /* Sections to be discarded. */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.exit.data)
+ }
- . = KERNELBASE;
+ . = KERNELBASE;
- /* Read-only sections, merged into text segment: */
- .text : {
- *(.text .text.*)
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
+/*
+ * Text, read only data and other permanent read-only sections
+ */
+
+ /* Text and gots */
+ .text : {
+ *(.text .text.*)
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+
#ifdef CONFIG_PPC32
- *(.got1)
- __got2_start = .;
- *(.got2)
- __got2_end = .;
-#else
- . = ALIGN(PAGE_SIZE);
- _etext = .;
-#endif
- }
-#ifdef CONFIG_PPC32
- _etext = .;
- PROVIDE (etext = .);
+ *(.got1)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+#endif /* CONFIG_PPC32 */
- RODATA
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+ PROVIDE32 (etext = .);
+ }
- .fixup : { *(.fixup) }
-#endif
+ /* Read-only data */
+ RODATA
+ /* Exception & bug tables */
__ex_table : {
__start___ex_table = .;
*(__ex_table)
@@ -67,192 +68,172 @@
__stop___bug_table = .;
}
-#ifdef CONFIG_PPC64
+/*
+ * Init sections discarded at runtime
+ */
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+
+ /* .exit.text is discarded at runtime, not link time,
+ * to deal with references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+
+ .init.data : {
+ *(.init.data);
+ __vtop_table_begin = .;
+ *(.vtop_fixup);
+ __vtop_table_end = .;
+ __ptov_table_begin = .;
+ *(.ptov_fixup);
+ __ptov_table_end = .;
+ }
+
+ . = ALIGN(16);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : {
+ __initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
__ftr_fixup : {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
- RODATA
-#endif
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
#ifdef CONFIG_PPC32
- /* Read-write section, merged into data segment: */
- . = ALIGN(PAGE_SIZE);
- _sdata = .;
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.got.plt) *(.got)
- *(.dynamic)
- CONSTRUCTORS
- }
-
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- _edata = .;
- PROVIDE (edata = .);
-
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-#endif
-
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
- }
-#ifdef CONFIG_PPC32
- /* .exit.text is discarded at runtime, not link time,
- to deal with references from __bug_table */
- .exit.text : { *(.exit.text) }
-#endif
- .init.data : {
- *(.init.data);
- __vtop_table_begin = .;
- *(.vtop_fixup);
- __vtop_table_end = .;
- __ptov_table_begin = .;
- *(.ptov_fixup);
- __ptov_table_end = .;
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- .initcall.init : {
- __initcall_start = .;
- *(.initcall1.init)
- *(.initcall2.init)
- *(.initcall3.init)
- *(.initcall4.init)
- *(.initcall5.init)
- *(.initcall6.init)
- *(.initcall7.init)
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- SECURITY_INIT
-
-#ifdef CONFIG_PPC32
- __start___ftr_fixup = .;
- __ftr_fixup : { *(__ftr_fixup) }
- __stop___ftr_fixup = .;
+ . = ALIGN(32);
#else
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
+ . = ALIGN(128);
#endif
+ .data.percpu : {
+ __per_cpu_start = .;
+ *(.data.percpu)
+ __per_cpu_end = .;
+ }
+
+ . = ALIGN(8);
+ .machine.desc : {
+ __machine_desc_start = . ;
+ *(.machine.desc)
+ __machine_desc_end = . ;
+ }
+
+ /* freed after init ends here */
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+/*
+ * And now the various read/write data
+ */
+
+ . = ALIGN(PAGE_SIZE);
+ _sdata = .;
#ifdef CONFIG_PPC32
- . = ALIGN(32);
-#endif
- .data.percpu : {
- __per_cpu_start = .;
- *(.data.percpu)
- __per_cpu_end = .;
- }
-
- . = ALIGN(PAGE_SIZE);
-#ifdef CONFIG_PPC64
- . = ALIGN(16384);
- __init_end = .;
- /* freed after init ends here */
-
- /* Read/write sections */
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(16384);
- _sdata = .;
- /* The initial task and kernel stack */
- .data.init_task : {
- *(.data.init_task)
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
- .data : {
- *(.data .data.rel* .toc1)
- *(.branch_lt)
- }
-
- .opd : {
- *(.opd)
- }
-
- .got : {
- __toc_start = .;
- *(.got)
- *(.toc)
- . = ALIGN(PAGE_SIZE);
- _edata = .;
- }
-
- . = ALIGN(PAGE_SIZE);
+ .data :
+ {
+ *(.data)
+ *(.sdata)
+ *(.got.plt) *(.got)
+ }
#else
- __initramfs_start = .;
- .init.ramfs : {
- *(.init.ramfs)
- }
- __initramfs_end = .;
+ .data : {
+ *(.data .data.rel* .toc1)
+ *(.branch_lt)
+ }
- . = ALIGN(4096);
- __init_end = .;
+ .opd : {
+ *(.opd)
+ }
- . = ALIGN(4096);
- _sextratext = .;
- _eextratext = .;
-
- __bss_start = .;
+ .got : {
+ __toc_start = .;
+ *(.got)
+ *(.toc)
+ }
#endif
- .bss : {
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- }
+ . = ALIGN(PAGE_SIZE);
+ _edata = .;
+ PROVIDE32 (edata = .);
-#ifdef CONFIG_PPC64
- . = ALIGN(PAGE_SIZE);
-#endif
- _end = . ;
+ /* The initial task and kernel stack */
#ifdef CONFIG_PPC32
- PROVIDE (end = .);
+ . = ALIGN(8192);
+#else
+ . = ALIGN(16384);
#endif
+ .data.init_task : {
+ *(.data.init_task)
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : {
+ *(.data.page_aligned)
+ }
+
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ __data_nosave : {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
+
+/*
+ * And finally the bss
+ */
+
+ .bss : {
+ __bss_start = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ __bss_stop = .;
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ _end = . ;
+ PROVIDE32 (end = .);
}
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 666c2aa..c251d99 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -18,7 +18,7 @@
#ifdef CONFIG_PPC64
/* Bits in SRR1 that are copied from MSR */
-#define MSR_MASK 0xffffffff87c0ffff
+#define MSR_MASK 0xffffffff87c0ffffUL
#else
#define MSR_MASK 0x87c0ffff
#endif
diff --git a/arch/ppc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
similarity index 100%
rename from arch/ppc/math-emu/Makefile
rename to arch/powerpc/math-emu/Makefile
diff --git a/arch/ppc/math-emu/double.h b/arch/powerpc/math-emu/double.h
similarity index 100%
rename from arch/ppc/math-emu/double.h
rename to arch/powerpc/math-emu/double.h
diff --git a/arch/ppc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c
similarity index 100%
rename from arch/ppc/math-emu/fabs.c
rename to arch/powerpc/math-emu/fabs.c
diff --git a/arch/ppc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
similarity index 100%
rename from arch/ppc/math-emu/fadd.c
rename to arch/powerpc/math-emu/fadd.c
diff --git a/arch/ppc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
similarity index 100%
rename from arch/ppc/math-emu/fadds.c
rename to arch/powerpc/math-emu/fadds.c
diff --git a/arch/ppc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
similarity index 100%
rename from arch/ppc/math-emu/fcmpo.c
rename to arch/powerpc/math-emu/fcmpo.c
diff --git a/arch/ppc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
similarity index 100%
rename from arch/ppc/math-emu/fcmpu.c
rename to arch/powerpc/math-emu/fcmpu.c
diff --git a/arch/ppc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
similarity index 100%
rename from arch/ppc/math-emu/fctiw.c
rename to arch/powerpc/math-emu/fctiw.c
diff --git a/arch/ppc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
similarity index 100%
rename from arch/ppc/math-emu/fctiwz.c
rename to arch/powerpc/math-emu/fctiwz.c
diff --git a/arch/ppc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
similarity index 100%
rename from arch/ppc/math-emu/fdiv.c
rename to arch/powerpc/math-emu/fdiv.c
diff --git a/arch/ppc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
similarity index 100%
rename from arch/ppc/math-emu/fdivs.c
rename to arch/powerpc/math-emu/fdivs.c
diff --git a/arch/ppc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
similarity index 100%
rename from arch/ppc/math-emu/fmadd.c
rename to arch/powerpc/math-emu/fmadd.c
diff --git a/arch/ppc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
similarity index 100%
rename from arch/ppc/math-emu/fmadds.c
rename to arch/powerpc/math-emu/fmadds.c
diff --git a/arch/ppc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c
similarity index 100%
rename from arch/ppc/math-emu/fmr.c
rename to arch/powerpc/math-emu/fmr.c
diff --git a/arch/ppc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
similarity index 100%
rename from arch/ppc/math-emu/fmsub.c
rename to arch/powerpc/math-emu/fmsub.c
diff --git a/arch/ppc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
similarity index 100%
rename from arch/ppc/math-emu/fmsubs.c
rename to arch/powerpc/math-emu/fmsubs.c
diff --git a/arch/ppc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
similarity index 100%
rename from arch/ppc/math-emu/fmul.c
rename to arch/powerpc/math-emu/fmul.c
diff --git a/arch/ppc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
similarity index 100%
rename from arch/ppc/math-emu/fmuls.c
rename to arch/powerpc/math-emu/fmuls.c
diff --git a/arch/ppc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c
similarity index 100%
rename from arch/ppc/math-emu/fnabs.c
rename to arch/powerpc/math-emu/fnabs.c
diff --git a/arch/ppc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c
similarity index 100%
rename from arch/ppc/math-emu/fneg.c
rename to arch/powerpc/math-emu/fneg.c
diff --git a/arch/ppc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
similarity index 100%
rename from arch/ppc/math-emu/fnmadd.c
rename to arch/powerpc/math-emu/fnmadd.c
diff --git a/arch/ppc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
similarity index 100%
rename from arch/ppc/math-emu/fnmadds.c
rename to arch/powerpc/math-emu/fnmadds.c
diff --git a/arch/ppc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
similarity index 100%
rename from arch/ppc/math-emu/fnmsub.c
rename to arch/powerpc/math-emu/fnmsub.c
diff --git a/arch/ppc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
similarity index 100%
rename from arch/ppc/math-emu/fnmsubs.c
rename to arch/powerpc/math-emu/fnmsubs.c
diff --git a/arch/ppc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c
similarity index 100%
rename from arch/ppc/math-emu/fres.c
rename to arch/powerpc/math-emu/fres.c
diff --git a/arch/ppc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
similarity index 100%
rename from arch/ppc/math-emu/frsp.c
rename to arch/powerpc/math-emu/frsp.c
diff --git a/arch/ppc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c
similarity index 100%
rename from arch/ppc/math-emu/frsqrte.c
rename to arch/powerpc/math-emu/frsqrte.c
diff --git a/arch/ppc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
similarity index 100%
rename from arch/ppc/math-emu/fsel.c
rename to arch/powerpc/math-emu/fsel.c
diff --git a/arch/ppc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
similarity index 100%
rename from arch/ppc/math-emu/fsqrt.c
rename to arch/powerpc/math-emu/fsqrt.c
diff --git a/arch/ppc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
similarity index 100%
rename from arch/ppc/math-emu/fsqrts.c
rename to arch/powerpc/math-emu/fsqrts.c
diff --git a/arch/ppc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
similarity index 100%
rename from arch/ppc/math-emu/fsub.c
rename to arch/powerpc/math-emu/fsub.c
diff --git a/arch/ppc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
similarity index 100%
rename from arch/ppc/math-emu/fsubs.c
rename to arch/powerpc/math-emu/fsubs.c
diff --git a/arch/ppc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
similarity index 100%
rename from arch/ppc/math-emu/lfd.c
rename to arch/powerpc/math-emu/lfd.c
diff --git a/arch/ppc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
similarity index 100%
rename from arch/ppc/math-emu/lfs.c
rename to arch/powerpc/math-emu/lfs.c
diff --git a/arch/ppc/math-emu/math.c b/arch/powerpc/math-emu/math.c
similarity index 100%
rename from arch/ppc/math-emu/math.c
rename to arch/powerpc/math-emu/math.c
diff --git a/arch/ppc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
similarity index 100%
rename from arch/ppc/math-emu/mcrfs.c
rename to arch/powerpc/math-emu/mcrfs.c
diff --git a/arch/ppc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
similarity index 100%
rename from arch/ppc/math-emu/mffs.c
rename to arch/powerpc/math-emu/mffs.c
diff --git a/arch/ppc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
similarity index 100%
rename from arch/ppc/math-emu/mtfsb0.c
rename to arch/powerpc/math-emu/mtfsb0.c
diff --git a/arch/ppc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
similarity index 100%
rename from arch/ppc/math-emu/mtfsb1.c
rename to arch/powerpc/math-emu/mtfsb1.c
diff --git a/arch/ppc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
similarity index 100%
rename from arch/ppc/math-emu/mtfsf.c
rename to arch/powerpc/math-emu/mtfsf.c
diff --git a/arch/ppc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
similarity index 100%
rename from arch/ppc/math-emu/mtfsfi.c
rename to arch/powerpc/math-emu/mtfsfi.c
diff --git a/arch/ppc/math-emu/op-1.h b/arch/powerpc/math-emu/op-1.h
similarity index 100%
rename from arch/ppc/math-emu/op-1.h
rename to arch/powerpc/math-emu/op-1.h
diff --git a/arch/ppc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h
similarity index 100%
rename from arch/ppc/math-emu/op-2.h
rename to arch/powerpc/math-emu/op-2.h
diff --git a/arch/ppc/math-emu/op-4.h b/arch/powerpc/math-emu/op-4.h
similarity index 100%
rename from arch/ppc/math-emu/op-4.h
rename to arch/powerpc/math-emu/op-4.h
diff --git a/arch/ppc/math-emu/op-common.h b/arch/powerpc/math-emu/op-common.h
similarity index 100%
rename from arch/ppc/math-emu/op-common.h
rename to arch/powerpc/math-emu/op-common.h
diff --git a/arch/ppc/math-emu/sfp-machine.h b/arch/powerpc/math-emu/sfp-machine.h
similarity index 100%
rename from arch/ppc/math-emu/sfp-machine.h
rename to arch/powerpc/math-emu/sfp-machine.h
diff --git a/arch/ppc/math-emu/single.h b/arch/powerpc/math-emu/single.h
similarity index 100%
rename from arch/ppc/math-emu/single.h
rename to arch/powerpc/math-emu/single.h
diff --git a/arch/ppc/math-emu/soft-fp.h b/arch/powerpc/math-emu/soft-fp.h
similarity index 100%
rename from arch/ppc/math-emu/soft-fp.h
rename to arch/powerpc/math-emu/soft-fp.h
diff --git a/arch/ppc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c
similarity index 100%
rename from arch/ppc/math-emu/stfd.c
rename to arch/powerpc/math-emu/stfd.c
diff --git a/arch/ppc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c
similarity index 100%
rename from arch/ppc/math-emu/stfiwx.c
rename to arch/powerpc/math-emu/stfiwx.c
diff --git a/arch/ppc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
similarity index 100%
rename from arch/ppc/math-emu/stfs.c
rename to arch/powerpc/math-emu/stfs.c
diff --git a/arch/ppc/math-emu/types.c b/arch/powerpc/math-emu/types.c
similarity index 100%
rename from arch/ppc/math-emu/types.c
rename to arch/powerpc/math-emu/types.c
diff --git a/arch/ppc/math-emu/udivmodti4.c b/arch/powerpc/math-emu/udivmodti4.c
similarity index 100%
rename from arch/ppc/math-emu/udivmodti4.c
rename to arch/powerpc/math-emu/udivmodti4.c
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index ec4adcb..5aea090 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -267,25 +267,29 @@
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
pte_t *ptep;
+ pmd_t *pmdp;
/* Since 4xx/Book-E supports per-page execute permission,
* we lazily flush dcache to icache. */
ptep = NULL;
- if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
- struct page *page = pte_page(*ptep);
+ if (get_pteptr(mm, address, &ptep, &pmdp)) {
+ spinlock_t *ptl = pte_lockptr(mm, pmdp);
+ spin_lock(ptl);
+ if (pte_present(*ptep)) {
+ struct page *page = pte_page(*ptep);
- if (! test_bit(PG_arch_1, &page->flags)) {
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
+ if (!test_bit(PG_arch_1, &page->flags)) {
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ pte_update(ptep, 0, _PAGE_HWEXEC);
+ _tlbie(address);
+ pte_unmap_unlock(ptep, ptl);
+ up_read(&mm->mmap_sem);
+ return 0;
}
- pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
- pte_unmap(ptep);
- up_read(&mm->mmap_sem);
- return 0;
+ pte_unmap_unlock(ptep, ptl);
}
- if (ptep != NULL)
- pte_unmap(ptep);
#endif
/* a write */
} else if (is_write) {
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 89b35c1..c006d90 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -167,7 +167,7 @@
* normal insert callback here.
*/
#ifdef CONFIG_PPC_ISERIES
- if (_machine == PLATFORM_ISERIES_LPAR)
+ if (machine_is(iseries))
ret = iSeries_hpte_insert(hpteg, va,
paddr,
tmp_mode,
@@ -176,7 +176,7 @@
else
#endif
#ifdef CONFIG_PPC_PSERIES
- if (_machine & PLATFORM_LPAR)
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR))
ret = pSeries_lpar_hpte_insert(hpteg, va,
paddr,
tmp_mode,
@@ -295,8 +295,7 @@
* Not in the device-tree, let's fallback on known size
* list for 16M capable GP & GR
*/
- if ((_machine != PLATFORM_ISERIES_LPAR) &&
- cpu_has_feature(CPU_FTR_16M_PAGE))
+ if (cpu_has_feature(CPU_FTR_16M_PAGE) && !machine_is(iseries))
memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
sizeof(mmu_psize_defaults_gp));
found:
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 5e435a9..741dd88 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -342,7 +342,7 @@
#ifdef CONFIG_NEED_MULTIPLE_NODES
for_each_online_node(nid) {
if (NODE_DATA(nid)->node_spanned_pages != 0) {
- printk("freeing bootmem node %x\n", nid);
+ printk("freeing bootmem node %d\n", nid);
totalram_pages +=
free_all_bootmem_node(NODE_DATA(nid));
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index e89b22a..0a335f3 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -756,6 +756,7 @@
struct device_node *memory = NULL;
nodemask_t nodes;
int default_nid = any_online_node(NODE_MASK_ALL);
+ int nid;
if (!numa_enabled || (min_common_depth < 0))
return default_nid;
@@ -790,6 +791,7 @@
goto ha_new_range;
}
BUG(); /* section address should be found above */
+ return 0;
/* Temporary code to ensure that returned node is not empty */
got_nid:
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index d296eb6..9062860 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -372,7 +372,7 @@
* the PTE pointer is unmodified if PTE is not found.
*/
int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
{
pgd_t *pgd;
pmd_t *pmd;
@@ -387,6 +387,8 @@
if (pte) {
retval = 1;
*ptep = pte;
+ if (pmdp)
+ *pmdp = pmd;
/* XXX caller needs to do pte_unmap, yuck */
}
}
@@ -424,7 +426,7 @@
mm = &init_mm;
pa = 0;
- if (get_pteptr(mm, addr, &pte)) {
+ if (get_pteptr(mm, addr, &pte, NULL)) {
pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
pte_unmap(pte);
}
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 91d25fb..4a9291d 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -239,7 +239,7 @@
if (cpu_has_feature(CPU_FTR_SLB))
return;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
unsigned long newstab;
if (cpu == 0)
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 554cd7c..f5f9859 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -6,7 +6,7 @@
oprofilefs.o oprofile_stats.o \
timer_int.o )
-oprofile-y := $(DRIVER_OBJS) common.o
+oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_PPC32) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c
new file mode 100644
index 0000000..75f57bc
--- /dev/null
+++ b/arch/powerpc/oprofile/backtrace.c
@@ -0,0 +1,126 @@
+/**
+ * Copyright (C) 2005 Brian Rogan <bcr6@cornell.edu>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+**/
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+
+#define STACK_SP(STACK) *(STACK)
+
+#define STACK_LR64(STACK) *((unsigned long *)(STACK) + 2)
+#define STACK_LR32(STACK) *((unsigned int *)(STACK) + 1)
+
+#ifdef CONFIG_PPC64
+#define STACK_LR(STACK) STACK_LR64(STACK)
+#else
+#define STACK_LR(STACK) STACK_LR32(STACK)
+#endif
+
+static unsigned int user_getsp32(unsigned int sp, int is_first)
+{
+ unsigned int stack_frame[2];
+
+ if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+ return 0;
+
+ /*
+ * The most likely reason for this is that we returned -EFAULT,
+ * which means that we've done all that we can do from
+ * interrupt context.
+ */
+ if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp,
+ sizeof(stack_frame)))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR32(stack_frame));
+
+ /*
+ * We do not enforce increasing stack addresses here because
+ * we may transition to a different stack, eg a signal handler.
+ */
+ return STACK_SP(stack_frame);
+}
+
+#ifdef CONFIG_PPC64
+static unsigned long user_getsp64(unsigned long sp, int is_first)
+{
+ unsigned long stack_frame[3];
+
+ if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+ return 0;
+
+ if (__copy_from_user_inatomic(stack_frame, (void *)sp,
+ sizeof(stack_frame)))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR64(stack_frame));
+
+ return STACK_SP(stack_frame);
+}
+#endif
+
+static unsigned long kernel_getsp(unsigned long sp, int is_first)
+{
+ unsigned long *stack_frame = (unsigned long *)sp;
+
+ if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR(stack_frame));
+
+ /*
+ * We do not enforce increasing stack addresses here because
+ * we might be transitioning from an interrupt stack to a kernel
+ * stack. validate_sp() is designed to understand this, so just
+ * use it.
+ */
+ return STACK_SP(stack_frame);
+}
+
+void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+ unsigned long sp = regs->gpr[1];
+ int first_frame = 1;
+
+ /* We ditch the top stackframe so need to loop through an extra time */
+ depth += 1;
+
+ if (!user_mode(regs)) {
+ while (depth--) {
+ sp = kernel_getsp(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+ } else {
+#ifdef CONFIG_PPC64
+ if (!test_thread_flag(TIF_32BIT)) {
+ while (depth--) {
+ sp = user_getsp64(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+
+ return;
+ }
+#endif
+
+ while (depth--) {
+ sp = user_getsp32(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+ }
+}
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index cc2535b..5b1de7e 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -117,18 +117,10 @@
oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-#ifdef CONFIG_PPC64
- oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
- &sys.backtrace_spinlocks);
-#endif
/* Default to tracing both kernel and user */
sys.enable_kernel = 1;
sys.enable_user = 1;
-#ifdef CONFIG_PPC64
- /* Turn on backtracing through spinlocks by default */
- sys.backtrace_spinlocks = 1;
-#endif
return 0;
}
@@ -168,6 +160,7 @@
ops->shutdown = op_powerpc_shutdown;
ops->start = op_powerpc_start;
ops->stop = op_powerpc_stop;
+ ops->backtrace = op_powerpc_backtrace;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
ops->cpu_type);
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
index 32abfdb..e0491c3 100644
--- a/arch/powerpc/oprofile/op_model_7450.c
+++ b/arch/powerpc/oprofile/op_model_7450.c
@@ -176,13 +176,13 @@
mtmsr(mfmsr() | MSR_PMM);
pc = mfspr(SPRN_SIAR);
- is_kernel = (pc >= KERNELBASE);
+ is_kernel = is_kernel_addr(pc);
for (i = 0; i < NUM_CTRS; ++i) {
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
index 26539cd..93d63e6 100644
--- a/arch/powerpc/oprofile/op_model_fsl_booke.c
+++ b/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -154,13 +154,13 @@
mtmsr(mfmsr() | MSR_PMM);
pc = regs->nip;
- is_kernel = (pc >= KERNELBASE);
+ is_kernel = is_kernel_addr(pc);
for (i = 0; i < num_counters; ++i) {
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 4b06e53..4c2beab 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -25,18 +25,14 @@
static int oprofile_running;
static int mmcra_has_sihv;
+/* Unfortunately these bits vary between CPUs */
+static unsigned long mmcra_sihv = MMCRA_SIHV;
+static unsigned long mmcra_sipr = MMCRA_SIPR;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
static u64 mmcr1_val;
-static u32 mmcra_val;
-
-/*
- * Since we do not have an NMI, backtracing through spinlocks is
- * only a best guess. In light of this, allow it to be disabled at
- * runtime.
- */
-static int backtrace_spinlocks;
+static u64 mmcra_val;
static void power4_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
@@ -63,8 +59,6 @@
mmcr1_val = sys->mmcr1;
mmcra_val = sys->mmcra;
- backtrace_spinlocks = sys->backtrace_spinlocks;
-
for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
@@ -197,25 +191,6 @@
{
}
-static unsigned long check_spinlock_pc(struct pt_regs *regs,
- unsigned long profile_pc)
-{
- unsigned long pc = instruction_pointer(regs);
-
- /*
- * If both the SIAR (sampled instruction) and the perfmon exception
- * occurred in a spinlock region then we account the sample to the
- * calling function. This isnt 100% correct, we really need soft
- * IRQ disable so we always get the perfmon exception at the
- * point at which the SIAR is set.
- */
- if (backtrace_spinlocks && in_lock_functions(pc) &&
- in_lock_functions(profile_pc))
- return regs->link;
- else
- return profile_pc;
-}
-
/*
* On GQ and newer the MMCRA stores the HV and PR bits at the time
* the SIAR was sampled. We use that to work out if the SIAR was sampled in
@@ -228,17 +203,17 @@
/* Cant do much about it */
if (!mmcra_has_sihv)
- return check_spinlock_pc(regs, pc);
+ return pc;
mmcra = mfspr(SPRN_MMCRA);
/* Were we in the hypervisor? */
- if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & MMCRA_SIHV))
+ if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv))
/* function descriptor madness */
return *((unsigned long *)hypervisor_bucket);
/* We were in userspace, nothing to do */
- if (mmcra & MMCRA_SIPR)
+ if (mmcra & mmcra_sipr)
return pc;
#ifdef CONFIG_PPC_RTAS
@@ -257,7 +232,7 @@
/* function descriptor madness */
return *((unsigned long *)kernel_unknown_bucket);
- return check_spinlock_pc(regs, pc);
+ return pc;
}
static int get_kernel(unsigned long pc)
@@ -268,7 +243,7 @@
is_kernel = is_kernel_addr(pc);
} else {
unsigned long mmcra = mfspr(SPRN_MMCRA);
- is_kernel = ((mmcra & MMCRA_SIPR) == 0);
+ is_kernel = ((mmcra & mmcra_sipr) == 0);
}
return is_kernel;
@@ -293,7 +268,7 @@
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
index 5c909ee..042f8f4 100644
--- a/arch/powerpc/oprofile/op_model_rs64.c
+++ b/arch/powerpc/oprofile/op_model_rs64.c
@@ -175,10 +175,13 @@
struct op_counter_config *ctr)
{
unsigned int mmcr0;
+ int is_kernel;
int val;
int i;
unsigned long pc = mfspr(SPRN_SIAR);
+ is_kernel = is_kernel_addr(pc);
+
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
@@ -186,7 +189,7 @@
val = ctr_read(i);
if (val < 0) {
if (ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel_addr(pc), i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d3d0ff7..06e3712 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -7,6 +7,7 @@
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
help
This option enables support for the MPC 8540 ADS board
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3157071..c2a3db8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -10,4 +10,9 @@
Units on machines implementing the Broadband Processor
Architecture.
+config SPUFS_MMAP
+ bool
+ depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+ default y
+
endmenu
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 3b998a3..e570bad 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -6,5 +6,11 @@
spu-base-y += spu_base.o spu_priv1.o
-builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o
-obj-y += $(builtin-spufs-m)
+# needed only when building loadable spufs.ko
+spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o
+obj-y += $(spufs-modular-m)
+
+# always needed in kernel
+spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o
+obj-y += $(spufs-builtin-y) $(spufs-builtin-m)
+
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 63aa52a..978be1c 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -63,7 +63,24 @@
void iic_local_enable(void)
{
- out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+ struct iic *iic = &__get_cpu_var(iic);
+ u64 tmp;
+
+ /*
+ * There seems to be a bug that is present in DD2.x CPUs
+ * and still only partially fixed in DD3.1.
+ * This bug causes a value written to the priority register
+ * not to make it there, resulting in a system hang unless we
+ * write it again.
+ * Masking with 0xf0 is done because the Cell BE does not
+ * implement the lower four bits of the interrupt priority,
+ * they always read back as zeroes, although future CPUs
+ * might implement different bits.
+ */
+ do {
+ out_be64(&iic->regs->prio, 0xff);
+ tmp = in_be64(&iic->regs->prio);
+ } while ((tmp & 0xf0) != 0xf0);
}
void iic_local_disable(void)
@@ -123,7 +140,7 @@
pending.class != 2)
break;
irq = IIC_EXT_OFFSET
- + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE)
+ + spider_get_irq(node)
+ node * IIC_NODE_STRIDE;
break;
case 0x01 ... 0x04:
@@ -174,40 +191,100 @@
return irq;
}
-static int setup_iic(int cpu, struct iic *iic)
+/* hardcoded part to be compatible with older firmware */
+
+static int setup_iic_hardcoded(void)
{
struct device_node *np;
- int nodeid = cpu / 2;
+ int nodeid, cpu;
unsigned long regs;
+ struct iic *iic;
- for (np = of_find_node_by_type(NULL, "cpu");
- np;
- np = of_find_node_by_type(np, "cpu")) {
- if (nodeid == *(int *)get_property(np, "node-id", NULL))
- break;
+ for_each_cpu(cpu) {
+ iic = &per_cpu(iic, cpu);
+ nodeid = cpu/2;
+
+ for (np = of_find_node_by_type(NULL, "cpu");
+ np;
+ np = of_find_node_by_type(np, "cpu")) {
+ if (nodeid == *(int *)get_property(np, "node-id", NULL))
+ break;
+ }
+
+ if (!np) {
+ printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
+ iic->regs = NULL;
+ iic->target_id = 0xff;
+ return -ENODEV;
+ }
+
+ regs = *(long *)get_property(np, "iic", NULL);
+
+ /* hack until we have decided on the devtree info */
+ regs += 0x400;
+ if (cpu & 1)
+ regs += 0x20;
+
+ printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
+ iic->regs = ioremap(regs, sizeof(struct iic_regs));
+ iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
}
- if (!np) {
- printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
- iic->regs = NULL;
- iic->target_id = 0xff;
- return -ENODEV;
- }
-
- regs = *(long *)get_property(np, "iic", NULL);
-
- /* hack until we have decided on the devtree info */
- regs += 0x400;
- if (cpu & 1)
- regs += 0x20;
-
- printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
- iic->regs = __ioremap(regs, sizeof(struct iic_regs),
- _PAGE_NO_CACHE);
- iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
return 0;
}
+static int setup_iic(void)
+{
+ struct device_node *dn;
+ unsigned long *regs;
+ char *compatible;
+ unsigned *np, found = 0;
+ struct iic *iic = NULL;
+
+ for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+ compatible = (char *)get_property(dn, "compatible", NULL);
+
+ if (!compatible) {
+ printk(KERN_WARNING "no compatible property found !\n");
+ continue;
+ }
+
+ if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller"))
+ regs = (unsigned long *)get_property(dn,"reg", NULL);
+ else
+ continue;
+
+ if (!regs)
+ printk(KERN_WARNING "IIC: no reg property\n");
+
+ np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL);
+
+ if (!np) {
+ printk(KERN_WARNING "IIC: CPU association not found\n");
+ iic->regs = NULL;
+ iic->target_id = 0xff;
+ return -ENODEV;
+ }
+
+ iic = &per_cpu(iic, np[0]);
+ iic->regs = ioremap(regs[0], sizeof(struct iic_regs));
+ iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
+ printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
+
+ iic = &per_cpu(iic, np[1]);
+ iic->regs = ioremap(regs[2], sizeof(struct iic_regs));
+ iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
+ printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
+
+ found++;
+ }
+
+ if (found)
+ return 0;
+ else
+ return -ENODEV;
+}
+
#ifdef CONFIG_SMP
/* Use the highest interrupt priorities for IPI */
@@ -283,10 +360,12 @@
int cpu, irq_offset;
struct iic *iic;
+ if (setup_iic() < 0)
+ setup_iic_hardcoded();
+
irq_offset = 0;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
iic = &per_cpu(iic, cpu);
- setup_iic(cpu, iic);
if (iic->regs)
out_be64(&iic->regs->prio, 0xff);
}
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index a14bd38..799f77d 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -57,7 +57,7 @@
extern u8 iic_get_target_id(int cpu);
extern void spider_init_IRQ(void);
-extern int spider_get_irq(unsigned long int_pending);
+extern int spider_get_irq(int node);
#endif
#endif /* ASM_CELL_PIC_H */
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 46e7cb9..a49ceb7 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -289,7 +289,7 @@
ioc_base = iommu->mapped_base;
ioc_mmio_base = iommu->mapped_mmio_base;
- for (real_address = 0, io_address = 0;
+ for (real_address = 0, io_address = map_start;
io_address <= map_start + map_size;
real_address += io_page_size, io_address += io_page_size) {
ioste = get_iost_entry(fake_iopt, io_address, io_page_size);
@@ -302,7 +302,7 @@
set_iopt_cache(ioc_mmio_base,
get_ioc_hash_1way(ioste, io_address),
get_ioc_tag(ioste, io_address),
- get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW));
+ get_iopt_entry(real_address, ioid, IOPT_PROT_RW));
}
}
@@ -344,8 +344,8 @@
/* node 0 */
iommu = &cell_iommus[0];
- iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(0x20000511000, 0x1000);
+ iommu->mapped_mmio_base = ioremap(0x20000510000, 0x1000);
enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
@@ -357,8 +357,8 @@
/* node 1 */
iommu = &cell_iommus[1];
- iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(0x30000511000, 0x1000);
+ iommu->mapped_mmio_base = ioremap(0x30000510000, 0x1000);
enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
@@ -407,8 +407,8 @@
iommu->base = *base;
iommu->mmio_base = *mmio_base;
- iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(*base, 0x1000);
+ iommu->mapped_mmio_base = ioremap(*mmio_base, 0x1000);
enable_mapping(iommu->mapped_base,
iommu->mapped_mmio_base);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index e0e051c..7eed8c6 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -203,7 +203,7 @@
pr_debug("pervasive area for CPU %d at %lx, size %x\n",
cpu, real_address, size);
- p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE);
+ p->regs = ioremap(real_address, size);
p->thread = thread;
return 0;
}
@@ -217,7 +217,7 @@
if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
return;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
p = &cbe_pervasive[cpu];
ret = cbe_find_pmd_mmio(cpu, p);
if (ret)
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index fec8e65..dac5d03 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -195,9 +195,13 @@
}
-static int __init cell_probe(int platform)
+static int __init cell_probe(void)
{
- if (platform != PLATFORM_CELL)
+ /* XXX This is temporary, the Cell maintainer will come up with
+ * more appropriate detection logic
+ */
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
return 0;
return 1;
@@ -212,7 +216,8 @@
return -ENODEV;
}
-struct machdep_calls __initdata cell_md = {
+define_machine(cell) {
+ .name = "Cell",
.probe = cell_probe,
.setup_arch = cell_setup_arch,
.init_early = cell_init_early,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index e741321..55cbdd7 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -84,10 +84,11 @@
static void spider_enable_irq(unsigned int irq)
{
+ int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
void __iomem *cfg = spider_get_irq_config(irq);
irq = spider_get_nr(irq);
- out_be32(cfg, in_be32(cfg) | 0x3107000eu);
+ out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
}
@@ -131,61 +132,108 @@
.end = spider_end_irq,
};
-
-int spider_get_irq(unsigned long int_pending)
+int spider_get_irq(int node)
{
- void __iomem *regs = spider_get_pic(int_pending);
unsigned long cs;
- int irq;
+ void __iomem *regs = spider_pics[node];
- cs = in_be32(regs + TIR_CS);
+ cs = in_be32(regs + TIR_CS) >> 24;
- irq = cs >> 24;
- if (irq != 63)
- return irq;
-
- return -1;
+ if (cs == 63)
+ return -1;
+ else
+ return cs;
}
-
-void spider_init_IRQ(void)
+
+/* hardcoded part to be compatible with older firmware */
+
+void spider_init_IRQ_hardcoded(void)
{
int node;
- struct device_node *dn;
- unsigned int *property;
long spiderpic;
+ long pics[] = { 0x24000008000, 0x34000008000 };
int n;
-/* FIXME: detect multiple PICs as soon as the device tree has them */
- for (node = 0; node < 1; node++) {
- dn = of_find_node_by_path("/");
- n = prom_n_addr_cells(dn);
- property = (unsigned int *) get_property(dn,
- "platform-spider-pic", NULL);
+ pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
- if (!property)
- continue;
- for (spiderpic = 0; n > 0; --n)
- spiderpic = (spiderpic << 32) + *property++;
+ for (node = 0; node < num_present_cpus()/2; node++) {
+ spiderpic = pics[node];
printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
- spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE);
+ spider_pics[node] = ioremap(spiderpic, 0x800);
for (n = 0; n < IIC_NUM_EXT; n++) {
int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
get_irq_desc(irq)->handler = &spider_pic;
+ }
/* do not mask any interrupts because of level */
out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
+
/* disable edge detection clear */
/* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
+
/* enable interrupt packets to be output */
out_be32(spider_pics[node] + TIR_PIEN,
in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
+
/* Enable the interrupt detection enable bit. Do this last! */
out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] +TIR_DEN) | 0x1);
+ in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ }
+}
+void spider_init_IRQ(void)
+{
+ long spider_reg;
+ struct device_node *dn;
+ char *compatible;
+ int n, node = 0;
+
+ for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+ compatible = (char *)get_property(dn, "compatible", NULL);
+
+ if (!compatible)
+ continue;
+
+ if (strstr(compatible, "CBEA,platform-spider-pic"))
+ spider_reg = *(long *)get_property(dn,"reg", NULL);
+ else if (strstr(compatible, "sti,platform-spider-pic")) {
+ spider_init_IRQ_hardcoded();
+ return;
+ } else
+ continue;
+
+ if (!spider_reg)
+ printk("interrupt controller does not have reg property !\n");
+
+ n = prom_n_addr_cells(dn);
+
+ if ( n != 2)
+ printk("reg property with invalid number of elements \n");
+
+ spider_pics[node] = ioremap(spider_reg, 0x800);
+
+ printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
+ spider_reg, n, spider_pics[node]);
+
+ for (n = 0; n < IIC_NUM_EXT; n++) {
+ int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
+ get_irq_desc(irq)->handler = &spider_pic;
}
+
+ /* do not mask any interrupts because of level */
+ out_be32(spider_pics[node] + TIR_MSK, 0x0);
+
+ /* disable edge detection clear */
+ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+
+ /* enable interrupt packets to be output */
+ out_be32(spider_pics[node] + TIR_PIEN,
+ in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+
+ /* Enable the interrupt detection enable bit. Do this last! */
+ out_be32(spider_pics[node] + TIR_DEN,
+ in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+
+ node++;
}
}
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index a8fa1ee..269dda4 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -111,7 +111,7 @@
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
/* Handle kernel space hash faults immediately.
User hash faults need to be deferred to process context. */
@@ -168,7 +168,7 @@
static int __spu_trap_tag_group(struct spu *spu)
{
pr_debug("%s\n", __FUNCTION__);
- /* wake_up(&spu->dma_wq); */
+ spu->mfc_callback(spu);
return 0;
}
@@ -242,6 +242,8 @@
spu_mfc_dsisr_set(spu, 0ul);
spu_int_stat_clear(spu, 1, stat);
spin_unlock(&spu->register_lock);
+ pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+ dar, dsisr);
if (stat & 1) /* segment fault */
__spu_trap_data_seg(spu, dar);
@@ -484,14 +486,13 @@
ea = spu->dar;
dsisr = spu->dsisr;
- if (dsisr & MFC_DSISR_PTE_NOT_FOUND) {
+ if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
access = (_PAGE_PRESENT | _PAGE_USER);
access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
if (hash_page(ea, access, 0x300) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
}
- if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) ||
- (dsisr & MFC_DSISR_ACCESS_DENIED)) {
+ if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
if ((ret = spu_handle_mm_fault(spu)) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
else
@@ -568,6 +569,11 @@
if (!spu->local_store)
goto out;
+ prop = get_property(spe, "problem", NULL);
+ if (!prop)
+ goto out_unmap;
+ spu->problem_phys = *(unsigned long *)prop;
+
spu->problem= map_spe_prop(spe, "problem");
if (!spu->problem)
goto out_unmap;
@@ -632,6 +638,7 @@
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
+ spu->mfc_callback = NULL;
mutex_lock(&spu_mutex);
spu->number = number++;
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
new file mode 100644
index 0000000..3a4245c
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -0,0 +1,345 @@
+/*
+ * System call callback functions for SPUs
+ */
+
+#define DEBUG
+
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+#include <linux/syscalls.h>
+
+#include <asm/spu.h>
+#include <asm/syscalls.h>
+#include <asm/unistd.h>
+
+/*
+ * This table defines the system calls that an SPU can call.
+ * It is currently a subset of the 64 bit powerpc system calls,
+ * with the exact semantics.
+ *
+ * The reasons for disabling some of the system calls are:
+ * 1. They interact with the way SPU syscalls are handled
+ * and we can't let them execute ever:
+ * restart_syscall, exit, for, execve, ptrace, ...
+ * 2. They are deprecated and replaced by other means:
+ * uselib, pciconfig_*, sysfs, ...
+ * 3. They are somewhat interacting with the system in a way
+ * we don't want an SPU to:
+ * reboot, init_module, mount, kexec_load
+ * 4. They are optional and we can't rely on them being
+ * linked into the kernel. Unfortunately, the cond_syscall
+ * helper does not work here as it does not add the necessary
+ * opd symbols:
+ * mbind, mq_open, ipc, ...
+ */
+
+void *spu_syscall_table[] = {
+ [__NR_restart_syscall] sys_ni_syscall, /* sys_restart_syscall */
+ [__NR_exit] sys_ni_syscall, /* sys_exit */
+ [__NR_fork] sys_ni_syscall, /* ppc_fork */
+ [__NR_read] sys_read,
+ [__NR_write] sys_write,
+ [__NR_open] sys_open,
+ [__NR_close] sys_close,
+ [__NR_waitpid] sys_waitpid,
+ [__NR_creat] sys_creat,
+ [__NR_link] sys_link,
+ [__NR_unlink] sys_unlink,
+ [__NR_execve] sys_ni_syscall, /* sys_execve */
+ [__NR_chdir] sys_chdir,
+ [__NR_time] sys_time,
+ [__NR_mknod] sys_mknod,
+ [__NR_chmod] sys_chmod,
+ [__NR_lchown] sys_lchown,
+ [__NR_break] sys_ni_syscall,
+ [__NR_oldstat] sys_ni_syscall,
+ [__NR_lseek] sys_lseek,
+ [__NR_getpid] sys_getpid,
+ [__NR_mount] sys_ni_syscall, /* sys_mount */
+ [__NR_umount] sys_ni_syscall,
+ [__NR_setuid] sys_setuid,
+ [__NR_getuid] sys_getuid,
+ [__NR_stime] sys_stime,
+ [__NR_ptrace] sys_ni_syscall, /* sys_ptrace */
+ [__NR_alarm] sys_alarm,
+ [__NR_oldfstat] sys_ni_syscall,
+ [__NR_pause] sys_ni_syscall, /* sys_pause */
+ [__NR_utime] sys_ni_syscall, /* sys_utime */
+ [__NR_stty] sys_ni_syscall,
+ [__NR_gtty] sys_ni_syscall,
+ [__NR_access] sys_access,
+ [__NR_nice] sys_nice,
+ [__NR_ftime] sys_ni_syscall,
+ [__NR_sync] sys_sync,
+ [__NR_kill] sys_kill,
+ [__NR_rename] sys_rename,
+ [__NR_mkdir] sys_mkdir,
+ [__NR_rmdir] sys_rmdir,
+ [__NR_dup] sys_dup,
+ [__NR_pipe] sys_pipe,
+ [__NR_times] sys_times,
+ [__NR_prof] sys_ni_syscall,
+ [__NR_brk] sys_brk,
+ [__NR_setgid] sys_setgid,
+ [__NR_getgid] sys_getgid,
+ [__NR_signal] sys_ni_syscall, /* sys_signal */
+ [__NR_geteuid] sys_geteuid,
+ [__NR_getegid] sys_getegid,
+ [__NR_acct] sys_ni_syscall, /* sys_acct */
+ [__NR_umount2] sys_ni_syscall, /* sys_umount */
+ [__NR_lock] sys_ni_syscall,
+ [__NR_ioctl] sys_ioctl,
+ [__NR_fcntl] sys_fcntl,
+ [__NR_mpx] sys_ni_syscall,
+ [__NR_setpgid] sys_setpgid,
+ [__NR_ulimit] sys_ni_syscall,
+ [__NR_oldolduname] sys_ni_syscall,
+ [__NR_umask] sys_umask,
+ [__NR_chroot] sys_chroot,
+ [__NR_ustat] sys_ni_syscall, /* sys_ustat */
+ [__NR_dup2] sys_dup2,
+ [__NR_getppid] sys_getppid,
+ [__NR_getpgrp] sys_getpgrp,
+ [__NR_setsid] sys_setsid,
+ [__NR_sigaction] sys_ni_syscall,
+ [__NR_sgetmask] sys_sgetmask,
+ [__NR_ssetmask] sys_ssetmask,
+ [__NR_setreuid] sys_setreuid,
+ [__NR_setregid] sys_setregid,
+ [__NR_sigsuspend] sys_ni_syscall,
+ [__NR_sigpending] sys_ni_syscall,
+ [__NR_sethostname] sys_sethostname,
+ [__NR_setrlimit] sys_setrlimit,
+ [__NR_getrlimit] sys_ni_syscall,
+ [__NR_getrusage] sys_getrusage,
+ [__NR_gettimeofday] sys_gettimeofday,
+ [__NR_settimeofday] sys_settimeofday,
+ [__NR_getgroups] sys_getgroups,
+ [__NR_setgroups] sys_setgroups,
+ [__NR_select] sys_ni_syscall,
+ [__NR_symlink] sys_symlink,
+ [__NR_oldlstat] sys_ni_syscall,
+ [__NR_readlink] sys_readlink,
+ [__NR_uselib] sys_ni_syscall, /* sys_uselib */
+ [__NR_swapon] sys_ni_syscall, /* sys_swapon */
+ [__NR_reboot] sys_ni_syscall, /* sys_reboot */
+ [__NR_readdir] sys_ni_syscall,
+ [__NR_mmap] sys_mmap,
+ [__NR_munmap] sys_munmap,
+ [__NR_truncate] sys_truncate,
+ [__NR_ftruncate] sys_ftruncate,
+ [__NR_fchmod] sys_fchmod,
+ [__NR_fchown] sys_fchown,
+ [__NR_getpriority] sys_getpriority,
+ [__NR_setpriority] sys_setpriority,
+ [__NR_profil] sys_ni_syscall,
+ [__NR_statfs] sys_ni_syscall, /* sys_statfs */
+ [__NR_fstatfs] sys_ni_syscall, /* sys_fstatfs */
+ [__NR_ioperm] sys_ni_syscall,
+ [__NR_socketcall] sys_socketcall,
+ [__NR_syslog] sys_syslog,
+ [__NR_setitimer] sys_setitimer,
+ [__NR_getitimer] sys_getitimer,
+ [__NR_stat] sys_newstat,
+ [__NR_lstat] sys_newlstat,
+ [__NR_fstat] sys_newfstat,
+ [__NR_olduname] sys_ni_syscall,
+ [__NR_iopl] sys_ni_syscall,
+ [__NR_vhangup] sys_vhangup,
+ [__NR_idle] sys_ni_syscall,
+ [__NR_vm86] sys_ni_syscall,
+ [__NR_wait4] sys_wait4,
+ [__NR_swapoff] sys_ni_syscall, /* sys_swapoff */
+ [__NR_sysinfo] sys_sysinfo,
+ [__NR_ipc] sys_ni_syscall, /* sys_ipc */
+ [__NR_fsync] sys_fsync,
+ [__NR_sigreturn] sys_ni_syscall,
+ [__NR_clone] sys_ni_syscall, /* ppc_clone */
+ [__NR_setdomainname] sys_setdomainname,
+ [__NR_uname] ppc_newuname,
+ [__NR_modify_ldt] sys_ni_syscall,
+ [__NR_adjtimex] sys_adjtimex,
+ [__NR_mprotect] sys_mprotect,
+ [__NR_sigprocmask] sys_ni_syscall,
+ [__NR_create_module] sys_ni_syscall,
+ [__NR_init_module] sys_ni_syscall, /* sys_init_module */
+ [__NR_delete_module] sys_ni_syscall, /* sys_delete_module */
+ [__NR_get_kernel_syms] sys_ni_syscall,
+ [__NR_quotactl] sys_ni_syscall, /* sys_quotactl */
+ [__NR_getpgid] sys_getpgid,
+ [__NR_fchdir] sys_fchdir,
+ [__NR_bdflush] sys_bdflush,
+ [__NR_sysfs] sys_ni_syscall, /* sys_sysfs */
+ [__NR_personality] ppc64_personality,
+ [__NR_afs_syscall] sys_ni_syscall,
+ [__NR_setfsuid] sys_setfsuid,
+ [__NR_setfsgid] sys_setfsgid,
+ [__NR__llseek] sys_llseek,
+ [__NR_getdents] sys_getdents,
+ [__NR__newselect] sys_select,
+ [__NR_flock] sys_flock,
+ [__NR_msync] sys_msync,
+ [__NR_readv] sys_readv,
+ [__NR_writev] sys_writev,
+ [__NR_getsid] sys_getsid,
+ [__NR_fdatasync] sys_fdatasync,
+ [__NR__sysctl] sys_ni_syscall, /* sys_sysctl */
+ [__NR_mlock] sys_mlock,
+ [__NR_munlock] sys_munlock,
+ [__NR_mlockall] sys_mlockall,
+ [__NR_munlockall] sys_munlockall,
+ [__NR_sched_setparam] sys_sched_setparam,
+ [__NR_sched_getparam] sys_sched_getparam,
+ [__NR_sched_setscheduler] sys_sched_setscheduler,
+ [__NR_sched_getscheduler] sys_sched_getscheduler,
+ [__NR_sched_yield] sys_sched_yield,
+ [__NR_sched_get_priority_max] sys_sched_get_priority_max,
+ [__NR_sched_get_priority_min] sys_sched_get_priority_min,
+ [__NR_sched_rr_get_interval] sys_sched_rr_get_interval,
+ [__NR_nanosleep] sys_nanosleep,
+ [__NR_mremap] sys_mremap,
+ [__NR_setresuid] sys_setresuid,
+ [__NR_getresuid] sys_getresuid,
+ [__NR_query_module] sys_ni_syscall,
+ [__NR_poll] sys_poll,
+ [__NR_nfsservctl] sys_ni_syscall, /* sys_nfsservctl */
+ [__NR_setresgid] sys_setresgid,
+ [__NR_getresgid] sys_getresgid,
+ [__NR_prctl] sys_prctl,
+ [__NR_rt_sigreturn] sys_ni_syscall, /* ppc64_rt_sigreturn */
+ [__NR_rt_sigaction] sys_ni_syscall, /* sys_rt_sigaction */
+ [__NR_rt_sigprocmask] sys_ni_syscall, /* sys_rt_sigprocmask */
+ [__NR_rt_sigpending] sys_ni_syscall, /* sys_rt_sigpending */
+ [__NR_rt_sigtimedwait] sys_ni_syscall, /* sys_rt_sigtimedwait */
+ [__NR_rt_sigqueueinfo] sys_ni_syscall, /* sys_rt_sigqueueinfo */
+ [__NR_rt_sigsuspend] sys_ni_syscall, /* sys_rt_sigsuspend */
+ [__NR_pread64] sys_pread64,
+ [__NR_pwrite64] sys_pwrite64,
+ [__NR_chown] sys_chown,
+ [__NR_getcwd] sys_getcwd,
+ [__NR_capget] sys_capget,
+ [__NR_capset] sys_capset,
+ [__NR_sigaltstack] sys_ni_syscall, /* sys_sigaltstack */
+ [__NR_sendfile] sys_sendfile64,
+ [__NR_getpmsg] sys_ni_syscall,
+ [__NR_putpmsg] sys_ni_syscall,
+ [__NR_vfork] sys_ni_syscall, /* ppc_vfork */
+ [__NR_ugetrlimit] sys_getrlimit,
+ [__NR_readahead] sys_readahead,
+ [192] sys_ni_syscall,
+ [193] sys_ni_syscall,
+ [194] sys_ni_syscall,
+ [195] sys_ni_syscall,
+ [196] sys_ni_syscall,
+ [197] sys_ni_syscall,
+ [__NR_pciconfig_read] sys_ni_syscall, /* sys_pciconfig_read */
+ [__NR_pciconfig_write] sys_ni_syscall, /* sys_pciconfig_write */
+ [__NR_pciconfig_iobase] sys_ni_syscall, /* sys_pciconfig_iobase */
+ [__NR_multiplexer] sys_ni_syscall,
+ [__NR_getdents64] sys_getdents64,
+ [__NR_pivot_root] sys_pivot_root,
+ [204] sys_ni_syscall,
+ [__NR_madvise] sys_madvise,
+ [__NR_mincore] sys_mincore,
+ [__NR_gettid] sys_gettid,
+ [__NR_tkill] sys_tkill,
+ [__NR_setxattr] sys_setxattr,
+ [__NR_lsetxattr] sys_lsetxattr,
+ [__NR_fsetxattr] sys_fsetxattr,
+ [__NR_getxattr] sys_getxattr,
+ [__NR_lgetxattr] sys_lgetxattr,
+ [__NR_fgetxattr] sys_fgetxattr,
+ [__NR_listxattr] sys_listxattr,
+ [__NR_llistxattr] sys_llistxattr,
+ [__NR_flistxattr] sys_flistxattr,
+ [__NR_removexattr] sys_removexattr,
+ [__NR_lremovexattr] sys_lremovexattr,
+ [__NR_fremovexattr] sys_fremovexattr,
+ [__NR_futex] sys_futex,
+ [__NR_sched_setaffinity] sys_sched_setaffinity,
+ [__NR_sched_getaffinity] sys_sched_getaffinity,
+ [__NR_tuxcall] sys_ni_syscall,
+ [226] sys_ni_syscall,
+ [__NR_io_setup] sys_io_setup,
+ [__NR_io_destroy] sys_io_destroy,
+ [__NR_io_getevents] sys_io_getevents,
+ [__NR_io_submit] sys_io_submit,
+ [__NR_io_cancel] sys_io_cancel,
+ [__NR_set_tid_address] sys_ni_syscall, /* sys_set_tid_address */
+ [__NR_fadvise64] sys_fadvise64,
+ [__NR_exit_group] sys_ni_syscall, /* sys_exit_group */
+ [__NR_lookup_dcookie] sys_ni_syscall, /* sys_lookup_dcookie */
+ [__NR_epoll_create] sys_epoll_create,
+ [__NR_epoll_ctl] sys_epoll_ctl,
+ [__NR_epoll_wait] sys_epoll_wait,
+ [__NR_remap_file_pages] sys_remap_file_pages,
+ [__NR_timer_create] sys_timer_create,
+ [__NR_timer_settime] sys_timer_settime,
+ [__NR_timer_gettime] sys_timer_gettime,
+ [__NR_timer_getoverrun] sys_timer_getoverrun,
+ [__NR_timer_delete] sys_timer_delete,
+ [__NR_clock_settime] sys_clock_settime,
+ [__NR_clock_gettime] sys_clock_gettime,
+ [__NR_clock_getres] sys_clock_getres,
+ [__NR_clock_nanosleep] sys_clock_nanosleep,
+ [__NR_swapcontext] sys_ni_syscall, /* ppc64_swapcontext */
+ [__NR_tgkill] sys_tgkill,
+ [__NR_utimes] sys_utimes,
+ [__NR_statfs64] sys_statfs64,
+ [__NR_fstatfs64] sys_fstatfs64,
+ [254] sys_ni_syscall,
+ [__NR_rtas] ppc_rtas,
+ [256] sys_ni_syscall,
+ [257] sys_ni_syscall,
+ [258] sys_ni_syscall,
+ [__NR_mbind] sys_ni_syscall, /* sys_mbind */
+ [__NR_get_mempolicy] sys_ni_syscall, /* sys_get_mempolicy */
+ [__NR_set_mempolicy] sys_ni_syscall, /* sys_set_mempolicy */
+ [__NR_mq_open] sys_ni_syscall, /* sys_mq_open */
+ [__NR_mq_unlink] sys_ni_syscall, /* sys_mq_unlink */
+ [__NR_mq_timedsend] sys_ni_syscall, /* sys_mq_timedsend */
+ [__NR_mq_timedreceive] sys_ni_syscall, /* sys_mq_timedreceive */
+ [__NR_mq_notify] sys_ni_syscall, /* sys_mq_notify */
+ [__NR_mq_getsetattr] sys_ni_syscall, /* sys_mq_getsetattr */
+ [__NR_kexec_load] sys_ni_syscall, /* sys_kexec_load */
+ [__NR_add_key] sys_ni_syscall, /* sys_add_key */
+ [__NR_request_key] sys_ni_syscall, /* sys_request_key */
+ [__NR_keyctl] sys_ni_syscall, /* sys_keyctl */
+ [__NR_waitid] sys_ni_syscall, /* sys_waitid */
+ [__NR_ioprio_set] sys_ni_syscall, /* sys_ioprio_set */
+ [__NR_ioprio_get] sys_ni_syscall, /* sys_ioprio_get */
+ [__NR_inotify_init] sys_ni_syscall, /* sys_inotify_init */
+ [__NR_inotify_add_watch] sys_ni_syscall, /* sys_inotify_add_watch */
+ [__NR_inotify_rm_watch] sys_ni_syscall, /* sys_inotify_rm_watch */
+ [__NR_spu_run] sys_ni_syscall, /* sys_spu_run */
+ [__NR_spu_create] sys_ni_syscall, /* sys_spu_create */
+ [__NR_pselect6] sys_ni_syscall, /* sys_pselect */
+ [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */
+ [__NR_unshare] sys_unshare,
+};
+
+long spu_sys_callback(struct spu_syscall_block *s)
+{
+ long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
+
+ BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls);
+
+ syscall = spu_syscall_table[s->nr_ret];
+
+ if (s->nr_ret >= __NR_syscalls) {
+ pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+ return -ENOSYS;
+ }
+
+#ifdef DEBUG
+ print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
+ printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
+ s->nr_ret,
+ s->parm[0], s->parm[1], s->parm[2],
+ s->parm[3], s->parm[4], s->parm[5]);
+#endif
+
+ return syscall(s->parm[0], s->parm[1], s->parm[2],
+ s->parm[3], s->parm[4], s->parm[5]);
+}
+EXPORT_SYMBOL_GPL(spu_sys_callback);
diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c
index a5c489a5..f1d35dd 100644
--- a/arch/powerpc/platforms/cell/spufs/backing_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c
@@ -285,6 +285,49 @@
spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP);
}
+static int spu_backing_set_mfc_query(struct spu_context * ctx, u32 mask,
+ u32 mode)
+{
+ struct spu_problem_collapsed *prob = &ctx->csa.prob;
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ ret = -EAGAIN;
+ if (prob->dma_querytype_RW)
+ goto out;
+ ret = 0;
+ /* FIXME: what are the side-effects of this? */
+ prob->dma_querymask_RW = mask;
+ prob->dma_querytype_RW = mode;
+out:
+ spin_unlock(&ctx->csa.register_lock);
+
+ return ret;
+}
+
+static u32 spu_backing_read_mfc_tagstatus(struct spu_context * ctx)
+{
+ return ctx->csa.prob.dma_tagstatus_R;
+}
+
+static u32 spu_backing_get_mfc_free_elements(struct spu_context *ctx)
+{
+ return ctx->csa.prob.dma_qstatus_R;
+}
+
+static int spu_backing_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command *cmd)
+{
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ ret = -EAGAIN;
+ /* FIXME: set up priv2->puq */
+ spin_unlock(&ctx->csa.register_lock);
+
+ return ret;
+}
+
struct spu_context_ops spu_backing_ops = {
.mbox_read = spu_backing_mbox_read,
.mbox_stat_read = spu_backing_mbox_stat_read,
@@ -305,4 +348,8 @@
.get_ls = spu_backing_get_ls,
.runcntl_write = spu_backing_runcntl_write,
.runcntl_stop = spu_backing_runcntl_stop,
+ .set_mfc_query = spu_backing_set_mfc_query,
+ .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus,
+ .get_mfc_free_elements = spu_backing_get_mfc_free_elements,
+ .send_mfc_command = spu_backing_send_mfc_command,
};
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 336f238..8bb33ab 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -27,7 +27,7 @@
#include <asm/spu_csa.h>
#include "spufs.h"
-struct spu_context *alloc_spu_context(struct address_space *local_store)
+struct spu_context *alloc_spu_context(void)
{
struct spu_context *ctx;
ctx = kmalloc(sizeof *ctx, GFP_KERNEL);
@@ -47,10 +47,17 @@
init_waitqueue_head(&ctx->ibox_wq);
init_waitqueue_head(&ctx->wbox_wq);
init_waitqueue_head(&ctx->stop_wq);
+ init_waitqueue_head(&ctx->mfc_wq);
ctx->ibox_fasync = NULL;
ctx->wbox_fasync = NULL;
+ ctx->mfc_fasync = NULL;
+ ctx->mfc = NULL;
+ ctx->tagwait = 0;
ctx->state = SPU_STATE_SAVED;
- ctx->local_store = local_store;
+ ctx->local_store = NULL;
+ ctx->cntl = NULL;
+ ctx->signal1 = NULL;
+ ctx->signal2 = NULL;
ctx->spu = NULL;
ctx->ops = &spu_backing_ops;
ctx->owner = get_task_mm(current);
@@ -68,8 +75,6 @@
ctx = container_of(kref, struct spu_context, kref);
down_write(&ctx->state_sema);
spu_deactivate(ctx);
- ctx->ibox_fasync = NULL;
- ctx->wbox_fasync = NULL;
up_write(&ctx->state_sema);
spu_fini_csa(&ctx->csa);
kfree(ctx);
@@ -109,7 +114,16 @@
void spu_unmap_mappings(struct spu_context *ctx)
{
- unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
+ if (ctx->local_store)
+ unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
+ if (ctx->mfc)
+ unmap_mapping_range(ctx->mfc, 0, 0x4000, 1);
+ if (ctx->cntl)
+ unmap_mapping_range(ctx->cntl, 0, 0x4000, 1);
+ if (ctx->signal1)
+ unmap_mapping_range(ctx->signal1, 0, 0x4000, 1);
+ if (ctx->signal2)
+ unmap_mapping_range(ctx->signal2, 0, 0x4000, 1);
}
int spu_acquire_runnable(struct spu_context *ctx)
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index dfa649c..366185e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#undef DEBUG
+
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/module.h>
@@ -39,8 +41,10 @@
spufs_mem_open(struct inode *inode, struct file *file)
{
struct spufs_inode_info *i = SPUFS_I(inode);
- file->private_data = i->i_ctx;
- file->f_mapping = i->i_ctx->local_store;
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->local_store = inode->i_mapping;
return 0;
}
@@ -84,7 +88,7 @@
return ret;
}
-#ifdef CONFIG_SPARSEMEM
+#ifdef CONFIG_SPUFS_MMAP
static struct page *
spufs_mem_mmap_nopage(struct vm_area_struct *vma,
unsigned long address, int *type)
@@ -136,11 +140,113 @@
.read = spufs_mem_read,
.write = spufs_mem_write,
.llseek = generic_file_llseek,
-#ifdef CONFIG_SPARSEMEM
+#ifdef CONFIG_SPUFS_MMAP
.mmap = spufs_mem_mmap,
#endif
};
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_ps_nopage(struct vm_area_struct *vma,
+ unsigned long address,
+ int *type, unsigned long ps_offs)
+{
+ struct page *page = NOPAGE_SIGBUS;
+ int fault_type = VM_FAULT_SIGBUS;
+ struct spu_context *ctx = vma->vm_file->private_data;
+ unsigned long offset = address - vma->vm_start;
+ unsigned long area;
+ int ret;
+
+ offset += vma->vm_pgoff << PAGE_SHIFT;
+ if (offset >= 0x4000)
+ goto out;
+
+ ret = spu_acquire_runnable(ctx);
+ if (ret)
+ goto out;
+
+ area = ctx->spu->problem_phys + ps_offs;
+ page = pfn_to_page((area + offset) >> PAGE_SHIFT);
+ fault_type = VM_FAULT_MINOR;
+ page_cache_get(page);
+
+ spu_release(ctx);
+
+ out:
+ if (type)
+ *type = fault_type;
+
+ return page;
+}
+
+static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x4000);
+}
+
+static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+ .nopage = spufs_cntl_mmap_nopage,
+};
+
+/*
+ * mmap support for problem state control area [0x4000 - 0x4fff].
+ * Mapping this area requires that the application have CAP_SYS_RAWIO,
+ * as these registers require special care when read/writing.
+ */
+static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_cntl_mmap_vmops;
+ return 0;
+}
+#endif
+
+static int spufs_cntl_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->cntl = inode->i_mapping;
+ return 0;
+}
+
+static ssize_t
+spufs_cntl_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ /* FIXME: read from spu status */
+ return -EINVAL;
+}
+
+static ssize_t
+spufs_cntl_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ /* FIXME: write to runctl bit */
+ return -EINVAL;
+}
+
+static struct file_operations spufs_cntl_fops = {
+ .open = spufs_cntl_open,
+ .read = spufs_cntl_read,
+ .write = spufs_cntl_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_cntl_mmap,
+#endif
+};
+
static int
spufs_regs_open(struct inode *inode, struct file *file)
{
@@ -501,6 +607,16 @@
.read = spufs_wbox_stat_read,
};
+static int spufs_signal1_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->signal1 = inode->i_mapping;
+ return nonseekable_open(inode, file);
+}
+
static ssize_t spufs_signal1_read(struct file *file, char __user *buf,
size_t len, loff_t *pos)
{
@@ -541,12 +657,50 @@
return 4;
}
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x14000);
+}
+
+static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+ .nopage = spufs_signal1_mmap_nopage,
+};
+
+static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_signal1_mmap_vmops;
+ return 0;
+}
+#endif
+
static struct file_operations spufs_signal1_fops = {
- .open = spufs_pipe_open,
+ .open = spufs_signal1_open,
.read = spufs_signal1_read,
.write = spufs_signal1_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_signal1_mmap,
+#endif
};
+static int spufs_signal2_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->signal2 = inode->i_mapping;
+ return nonseekable_open(inode, file);
+}
+
static ssize_t spufs_signal2_read(struct file *file, char __user *buf,
size_t len, loff_t *pos)
{
@@ -589,10 +743,39 @@
return 4;
}
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x1c000);
+}
+
+static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+ .nopage = spufs_signal2_mmap_nopage,
+};
+
+static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ /* FIXME: */
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_signal2_mmap_vmops;
+ return 0;
+}
+#endif
+
static struct file_operations spufs_signal2_fops = {
- .open = spufs_pipe_open,
+ .open = spufs_signal2_open,
.read = spufs_signal2_read,
.write = spufs_signal2_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_signal2_mmap,
+#endif
};
static void spufs_signal1_type_set(void *data, u64 val)
@@ -641,6 +824,332 @@
DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
spufs_signal2_type_set, "%llu");
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x3000);
+}
+
+static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+ .nopage = spufs_mfc_mmap_nopage,
+};
+
+/*
+ * mmap support for problem state MFC DMA area [0x0000 - 0x0fff].
+ * Mapping this area requires that the application have CAP_SYS_RAWIO,
+ * as these registers require special care when read/writing.
+ */
+static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_mfc_mmap_vmops;
+ return 0;
+}
+#endif
+
+static int spufs_mfc_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+
+ /* we don't want to deal with DMA into other processes */
+ if (ctx->owner != current->mm)
+ return -EINVAL;
+
+ if (atomic_read(&inode->i_count) != 1)
+ return -EBUSY;
+
+ file->private_data = ctx;
+ return nonseekable_open(inode, file);
+}
+
+/* interrupt-level mfc callback function. */
+void spufs_mfc_callback(struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ wake_up_all(&ctx->mfc_wq);
+
+ pr_debug("%s %s\n", __FUNCTION__, spu->name);
+ if (ctx->mfc_fasync) {
+ u32 free_elements, tagstatus;
+ unsigned int mask;
+
+ /* no need for spu_acquire in interrupt context */
+ free_elements = ctx->ops->get_mfc_free_elements(ctx);
+ tagstatus = ctx->ops->read_mfc_tagstatus(ctx);
+
+ mask = 0;
+ if (free_elements & 0xffff)
+ mask |= POLLOUT;
+ if (tagstatus & ctx->tagwait)
+ mask |= POLLIN;
+
+ kill_fasync(&ctx->mfc_fasync, SIGIO, mask);
+ }
+}
+
+static int spufs_read_mfc_tagstatus(struct spu_context *ctx, u32 *status)
+{
+ /* See if there is one tag group is complete */
+ /* FIXME we need locking around tagwait */
+ *status = ctx->ops->read_mfc_tagstatus(ctx) & ctx->tagwait;
+ ctx->tagwait &= ~*status;
+ if (*status)
+ return 1;
+
+ /* enable interrupt waiting for any tag group,
+ may silently fail if interrupts are already enabled */
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1);
+ return 0;
+}
+
+static ssize_t spufs_mfc_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ int ret = -EINVAL;
+ u32 status;
+
+ if (size != 4)
+ goto out;
+
+ spu_acquire(ctx);
+ if (file->f_flags & O_NONBLOCK) {
+ status = ctx->ops->read_mfc_tagstatus(ctx);
+ if (!(status & ctx->tagwait))
+ ret = -EAGAIN;
+ else
+ ctx->tagwait &= ~status;
+ } else {
+ ret = spufs_wait(ctx->mfc_wq,
+ spufs_read_mfc_tagstatus(ctx, &status));
+ }
+ spu_release(ctx);
+
+ if (ret)
+ goto out;
+
+ ret = 4;
+ if (copy_to_user(buffer, &status, 4))
+ ret = -EFAULT;
+
+out:
+ return ret;
+}
+
+static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
+{
+ pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+ cmd->ea, cmd->size, cmd->tag, cmd->cmd);
+
+ switch (cmd->cmd) {
+ case MFC_PUT_CMD:
+ case MFC_PUTF_CMD:
+ case MFC_PUTB_CMD:
+ case MFC_GET_CMD:
+ case MFC_GETF_CMD:
+ case MFC_GETB_CMD:
+ break;
+ default:
+ pr_debug("invalid DMA opcode %x\n", cmd->cmd);
+ return -EIO;
+ }
+
+ if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
+ pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+ cmd->ea, cmd->lsa);
+ return -EIO;
+ }
+
+ switch (cmd->size & 0xf) {
+ case 1:
+ break;
+ case 2:
+ if (cmd->lsa & 1)
+ goto error;
+ break;
+ case 4:
+ if (cmd->lsa & 3)
+ goto error;
+ break;
+ case 8:
+ if (cmd->lsa & 7)
+ goto error;
+ break;
+ case 0:
+ if (cmd->lsa & 15)
+ goto error;
+ break;
+ error:
+ default:
+ pr_debug("invalid DMA alignment %x for size %x\n",
+ cmd->lsa & 0xf, cmd->size);
+ return -EIO;
+ }
+
+ if (cmd->size > 16 * 1024) {
+ pr_debug("invalid DMA size %x\n", cmd->size);
+ return -EIO;
+ }
+
+ if (cmd->tag & 0xfff0) {
+ /* we reserve the higher tag numbers for kernel use */
+ pr_debug("invalid DMA tag\n");
+ return -EIO;
+ }
+
+ if (cmd->class) {
+ /* not supported in this version */
+ pr_debug("invalid DMA class\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int spu_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command cmd,
+ int *error)
+{
+ *error = ctx->ops->send_mfc_command(ctx, &cmd);
+ if (*error == -EAGAIN) {
+ /* wait for any tag group to complete
+ so we have space for the new command */
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1);
+ /* try again, because the queue might be
+ empty again */
+ *error = ctx->ops->send_mfc_command(ctx, &cmd);
+ if (*error == -EAGAIN)
+ return 0;
+ }
+ return 1;
+}
+
+static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct mfc_dma_command cmd;
+ int ret = -EINVAL;
+
+ if (size != sizeof cmd)
+ goto out;
+
+ ret = -EFAULT;
+ if (copy_from_user(&cmd, buffer, sizeof cmd))
+ goto out;
+
+ ret = spufs_check_valid_dma(&cmd);
+ if (ret)
+ goto out;
+
+ spu_acquire_runnable(ctx);
+ if (file->f_flags & O_NONBLOCK) {
+ ret = ctx->ops->send_mfc_command(ctx, &cmd);
+ } else {
+ int status;
+ ret = spufs_wait(ctx->mfc_wq,
+ spu_send_mfc_command(ctx, cmd, &status));
+ if (status)
+ ret = status;
+ }
+ spu_release(ctx);
+
+ if (ret)
+ goto out;
+
+ ctx->tagwait |= 1 << cmd.tag;
+
+out:
+ return ret;
+}
+
+static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 free_elements, tagstatus;
+ unsigned int mask;
+
+ spu_acquire(ctx);
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2);
+ free_elements = ctx->ops->get_mfc_free_elements(ctx);
+ tagstatus = ctx->ops->read_mfc_tagstatus(ctx);
+ spu_release(ctx);
+
+ poll_wait(file, &ctx->mfc_wq, wait);
+
+ mask = 0;
+ if (free_elements & 0xffff)
+ mask |= POLLOUT | POLLWRNORM;
+ if (tagstatus & ctx->tagwait)
+ mask |= POLLIN | POLLRDNORM;
+
+ pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+ free_elements, tagstatus, ctx->tagwait);
+
+ return mask;
+}
+
+static int spufs_mfc_flush(struct file *file)
+{
+ struct spu_context *ctx = file->private_data;
+ int ret;
+
+ spu_acquire(ctx);
+#if 0
+/* this currently hangs */
+ ret = spufs_wait(ctx->mfc_wq,
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2));
+ if (ret)
+ goto out;
+ ret = spufs_wait(ctx->mfc_wq,
+ ctx->ops->read_mfc_tagstatus(ctx) == ctx->tagwait);
+out:
+#else
+ ret = 0;
+#endif
+ spu_release(ctx);
+
+ return ret;
+}
+
+static int spufs_mfc_fsync(struct file *file, struct dentry *dentry,
+ int datasync)
+{
+ return spufs_mfc_flush(file);
+}
+
+static int spufs_mfc_fasync(int fd, struct file *file, int on)
+{
+ struct spu_context *ctx = file->private_data;
+
+ return fasync_helper(fd, file, on, &ctx->mfc_fasync);
+}
+
+static struct file_operations spufs_mfc_fops = {
+ .open = spufs_mfc_open,
+ .read = spufs_mfc_read,
+ .write = spufs_mfc_write,
+ .poll = spufs_mfc_poll,
+ .flush = spufs_mfc_flush,
+ .fsync = spufs_mfc_fsync,
+ .fasync = spufs_mfc_fasync,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_mfc_mmap,
+#endif
+};
+
static void spufs_npc_set(void *data, u64 val)
{
struct spu_context *ctx = data;
@@ -783,6 +1292,8 @@
{ "signal2", &spufs_signal2_fops, 0666, },
{ "signal1_type", &spufs_signal1_type, 0666, },
{ "signal2_type", &spufs_signal2_type, 0666, },
+ { "mfc", &spufs_mfc_fops, 0666, },
+ { "cntl", &spufs_cntl_fops, 0666, },
{ "npc", &spufs_npc_ops, 0666, },
{ "fpcr", &spufs_fpcr_fops, 0666, },
{ "decr", &spufs_decr_ops, 0666, },
diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c
index 5445719..a13a8b5 100644
--- a/arch/powerpc/platforms/cell/spufs/hw_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c
@@ -232,6 +232,59 @@
spin_unlock_irq(&ctx->spu->register_lock);
}
+static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode)
+{
+ struct spu_problem *prob = ctx->spu->problem;
+ int ret;
+
+ spin_lock_irq(&ctx->spu->register_lock);
+ ret = -EAGAIN;
+ if (in_be32(&prob->dma_querytype_RW))
+ goto out;
+ ret = 0;
+ out_be32(&prob->dma_querymask_RW, mask);
+ out_be32(&prob->dma_querytype_RW, mode);
+out:
+ spin_unlock_irq(&ctx->spu->register_lock);
+ return ret;
+}
+
+static u32 spu_hw_read_mfc_tagstatus(struct spu_context * ctx)
+{
+ return in_be32(&ctx->spu->problem->dma_tagstatus_R);
+}
+
+static u32 spu_hw_get_mfc_free_elements(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->dma_qstatus_R);
+}
+
+static int spu_hw_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command *cmd)
+{
+ u32 status;
+ struct spu_problem *prob = ctx->spu->problem;
+
+ spin_lock_irq(&ctx->spu->register_lock);
+ out_be32(&prob->mfc_lsa_W, cmd->lsa);
+ out_be64(&prob->mfc_ea_W, cmd->ea);
+ out_be32(&prob->mfc_union_W.by32.mfc_size_tag32,
+ cmd->size << 16 | cmd->tag);
+ out_be32(&prob->mfc_union_W.by32.mfc_class_cmd32,
+ cmd->class << 16 | cmd->cmd);
+ status = in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
+ spin_unlock_irq(&ctx->spu->register_lock);
+
+ switch (status & 0xffff) {
+ case 0:
+ return 0;
+ case 2:
+ return -EAGAIN;
+ default:
+ return -EINVAL;
+ }
+}
+
struct spu_context_ops spu_hw_ops = {
.mbox_read = spu_hw_mbox_read,
.mbox_stat_read = spu_hw_mbox_stat_read,
@@ -252,4 +305,8 @@
.get_ls = spu_hw_get_ls,
.runcntl_write = spu_hw_runcntl_write,
.runcntl_stop = spu_hw_runcntl_stop,
+ .set_mfc_query = spu_hw_set_mfc_query,
+ .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus,
+ .get_mfc_free_elements = spu_hw_get_mfc_free_elements,
+ .send_mfc_command = spu_hw_send_mfc_command,
};
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 5be40aa..d955419 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -241,7 +241,7 @@
inode->i_gid = dir->i_gid;
inode->i_mode &= S_ISGID;
}
- ctx = alloc_spu_context(inode->i_mapping);
+ ctx = alloc_spu_context();
SPUFS_I(inode)->i_ctx = ctx;
if (!ctx)
goto out_iput;
@@ -442,7 +442,7 @@
.kill_sb = kill_litter_super,
};
-static int spufs_init(void)
+static int __init spufs_init(void)
{
int ret;
ret = -ENOMEM;
@@ -472,7 +472,7 @@
}
module_init(spufs_init);
-static void spufs_exit(void)
+static void __exit spufs_exit(void)
{
spu_sched_exit();
unregister_spu_syscalls(&spufs_calls);
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 18ea886..c04e078 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -76,6 +76,90 @@
return 0;
}
+/*
+ * SPU syscall restarting is tricky because we violate the basic
+ * assumption that the signal handler is running on the interrupted
+ * thread. Here instead, the handler runs on PowerPC user space code,
+ * while the syscall was called from the SPU.
+ * This means we can only do a very rough approximation of POSIX
+ * signal semantics.
+ */
+int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret,
+ unsigned int *npc)
+{
+ int ret;
+
+ switch (*spu_ret) {
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ /*
+ * Enter the regular syscall restarting for
+ * sys_spu_run, then restart the SPU syscall
+ * callback.
+ */
+ *npc -= 8;
+ ret = -ERESTARTSYS;
+ break;
+ case -ERESTARTNOHAND:
+ case -ERESTART_RESTARTBLOCK:
+ /*
+ * Restart block is too hard for now, just return -EINTR
+ * to the SPU.
+ * ERESTARTNOHAND comes from sys_pause, we also return
+ * -EINTR from there.
+ * Assume that we need to be restarted ourselves though.
+ */
+ *spu_ret = -EINTR;
+ ret = -ERESTARTSYS;
+ break;
+ default:
+ printk(KERN_WARNING "%s: unexpected return code %ld\n",
+ __FUNCTION__, *spu_ret);
+ ret = 0;
+ }
+ return ret;
+}
+
+int spu_process_callback(struct spu_context *ctx)
+{
+ struct spu_syscall_block s;
+ u32 ls_pointer, npc;
+ char *ls;
+ long spu_ret;
+ int ret;
+
+ /* get syscall block from local store */
+ npc = ctx->ops->npc_read(ctx);
+ ls = ctx->ops->get_ls(ctx);
+ ls_pointer = *(u32*)(ls + npc);
+ if (ls_pointer > (LS_SIZE - sizeof(s)))
+ return -EFAULT;
+ memcpy(&s, ls + ls_pointer, sizeof (s));
+
+ /* do actual syscall without pinning the spu */
+ ret = 0;
+ spu_ret = -ENOSYS;
+ npc += 4;
+
+ if (s.nr_ret < __NR_syscalls) {
+ spu_release(ctx);
+ /* do actual system call from here */
+ spu_ret = spu_sys_callback(&s);
+ if (spu_ret <= -ERESTARTSYS) {
+ ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
+ }
+ spu_acquire(ctx);
+ if (ret == -ERESTARTSYS)
+ return ret;
+ }
+
+ /* write result, jump over indirect pointer */
+ memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret));
+ ctx->ops->npc_write(ctx, npc);
+ ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
+ return ret;
+}
+
static inline int spu_process_events(struct spu_context *ctx)
{
struct spu *spu = ctx->spu;
@@ -107,6 +191,13 @@
ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status));
if (unlikely(ret))
break;
+ if ((*status & SPU_STATUS_STOPPED_BY_STOP) &&
+ (*status >> SPU_STOP_STATUS_SHIFT == 0x2104)) {
+ ret = spu_process_callback(ctx);
+ if (ret)
+ break;
+ *status &= ~SPU_STATUS_STOPPED_BY_STOP;
+ }
if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
ret = spu_reacquire_runnable(ctx, npc, status);
if (ret)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 963182f..bf652cd 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -180,6 +180,7 @@
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
+ spu->mfc_callback = spufs_mfc_callback;
mb();
spu_unmap_mappings(ctx);
spu_restore(&ctx->csa, spu);
@@ -197,6 +198,7 @@
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
+ spu->mfc_callback = NULL;
spu->mm = NULL;
spu->pid = 0;
spu->prio = MAX_PRIO;
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index db2601f..4485738 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -43,7 +43,11 @@
struct spu *spu; /* pointer to a physical SPU */
struct spu_state csa; /* SPU context save area. */
spinlock_t mmio_lock; /* protects mmio access */
- struct address_space *local_store;/* local store backing store */
+ struct address_space *local_store; /* local store mapping. */
+ struct address_space *mfc; /* 'mfc' area mappings. */
+ struct address_space *cntl; /* 'control' area mappings. */
+ struct address_space *signal1; /* 'signal1' area mappings. */
+ struct address_space *signal2; /* 'signal2' area mappings. */
enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state;
struct rw_semaphore state_sema;
@@ -55,13 +59,27 @@
wait_queue_head_t ibox_wq;
wait_queue_head_t wbox_wq;
wait_queue_head_t stop_wq;
+ wait_queue_head_t mfc_wq;
struct fasync_struct *ibox_fasync;
struct fasync_struct *wbox_fasync;
+ struct fasync_struct *mfc_fasync;
+ u32 tagwait;
struct spu_context_ops *ops;
struct work_struct reap_work;
u64 flags;
};
+struct mfc_dma_command {
+ int32_t pad; /* reserved */
+ uint32_t lsa; /* local storage address */
+ uint64_t ea; /* effective address */
+ uint16_t size; /* transfer size */
+ uint16_t tag; /* command tag */
+ uint16_t class; /* class ID */
+ uint16_t cmd; /* command opcode */
+};
+
+
/* SPU context query/set operations. */
struct spu_context_ops {
int (*mbox_read) (struct spu_context * ctx, u32 * data);
@@ -84,6 +102,11 @@
char*(*get_ls) (struct spu_context * ctx);
void (*runcntl_write) (struct spu_context * ctx, u32 data);
void (*runcntl_stop) (struct spu_context * ctx);
+ int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode);
+ u32 (*read_mfc_tagstatus)(struct spu_context * ctx);
+ u32 (*get_mfc_free_elements)(struct spu_context *ctx);
+ int (*send_mfc_command)(struct spu_context *ctx,
+ struct mfc_dma_command *cmd);
};
extern struct spu_context_ops spu_hw_ops;
@@ -106,7 +129,7 @@
extern struct file_operations spufs_context_fops;
/* context management */
-struct spu_context * alloc_spu_context(struct address_space *local_store);
+struct spu_context * alloc_spu_context(void);
void destroy_spu_context(struct kref *kref);
struct spu_context * get_spu_context(struct spu_context *ctx);
int put_spu_context(struct spu_context *ctx);
@@ -159,5 +182,6 @@
void spufs_ibox_callback(struct spu *spu);
void spufs_wbox_callback(struct spu *spu);
void spufs_stop_callback(struct spu *spu);
+void spufs_mfc_callback(struct spu *spu);
#endif
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 212db28..97898d5 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -2145,7 +2145,8 @@
csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
CLASS1_ENABLE_STORAGE_FAULT_INTR;
csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
- CLASS2_ENABLE_SPU_HALT_INTR;
+ CLASS2_ENABLE_SPU_HALT_INTR |
+ CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
}
static void init_priv2(struct spu_state *csa)
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
index 814f547..63f0aee 100644
--- a/arch/powerpc/platforms/chrp/chrp.h
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -8,4 +8,4 @@
extern long chrp_time_init(void);
extern void chrp_find_bridges(void);
-extern void chrp_event_scan(void);
+extern void chrp_event_scan(unsigned long);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 8bf4307..23a2017 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -35,6 +35,7 @@
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/timer.h>
#include <asm/io.h>
#include <asm/pgtable.h>
@@ -61,6 +62,10 @@
struct mpic *chrp_mpic;
+/* Used for doing CHRP event-scans */
+DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
+unsigned long event_scan_interval;
+
/*
* XXX this should be in xmon.h, but putting it there means xmon.h
* has to include <linux/interrupt.h> (to get irqreturn_t), which
@@ -229,8 +234,6 @@
{
struct device_node *root = find_path_device ("/");
char *machine = NULL;
- struct device_node *device;
- unsigned int *p = NULL;
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
@@ -287,23 +290,12 @@
*/
sio_init();
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = find_devices("rtas");
- if (device)
- p = (unsigned int *) get_property
- (device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- ppc_md.heartbeat = chrp_event_scan;
- ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
- ppc_md.heartbeat_count = 1;
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, ppc_md.heartbeat_reset);
- }
-
pci_create_OF_bus_map();
+#ifdef CONFIG_SMP
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
/*
* Print the banner, then scroll down so boot progress
* can be printed. -- Cort
@@ -312,7 +304,7 @@
}
void
-chrp_event_scan(void)
+chrp_event_scan(unsigned long unused)
{
unsigned char log[1024];
int ret = 0;
@@ -320,7 +312,8 @@
/* XXX: we should loop until the hardware says no more error logs -- Cort */
rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
__pa(log), 1024);
- ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+ mod_timer(&__get_cpu_var(heartbeat_timer),
+ jiffies + event_scan_interval);
}
/*
@@ -465,6 +458,9 @@
void __init
chrp_init2(void)
{
+ struct device_node *device;
+ unsigned int *p = NULL;
+
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
@@ -476,12 +472,53 @@
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
+ /* Get the event scan rate for the rtas so we know how
+ * often it expects a heartbeat. -- Cort
+ */
+ device = find_devices("rtas");
+ if (device)
+ p = (unsigned int *) get_property
+ (device, "rtas-event-scan-rate", NULL);
+ if (p && *p) {
+ /*
+ * Arrange to call chrp_event_scan at least *p times
+ * per minute. We use 59 rather than 60 here so that
+ * the rate will be slightly higher than the minimum.
+ * This all assumes we don't do hotplug CPU on any
+ * machine that needs the event scans done.
+ */
+ unsigned long interval, offset;
+ int cpu, ncpus;
+ struct timer_list *timer;
+
+ interval = HZ * 59 / *p;
+ offset = HZ;
+ ncpus = num_online_cpus();
+ event_scan_interval = ncpus * interval;
+ for (cpu = 0; cpu < ncpus; ++cpu) {
+ timer = &per_cpu(heartbeat_timer, cpu);
+ setup_timer(timer, chrp_event_scan, 0);
+ timer->expires = jiffies + offset;
+ add_timer_on(timer, cpu);
+ offset += interval;
+ }
+ printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+ *p, interval);
+ }
+
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
-void __init chrp_init(void)
+static int __init chrp_probe(void)
{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
+
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 0x44;
DMA_MODE_WRITE = 0x48;
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index fa45506..6ce8a40 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -675,18 +675,20 @@
void __init iSeries_init_IRQ(void) { }
#endif
-static int __init iseries_probe(int platform)
+static int __init iseries_probe(void)
{
- if (PLATFORM_ISERIES_LPAR != platform)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
return 0;
- ppc64_firmware_features |= FW_FEATURE_ISERIES;
- ppc64_firmware_features |= FW_FEATURE_LPAR;
+ powerpc_firmware_features |= FW_FEATURE_ISERIES;
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
return 1;
}
-struct machdep_calls __initdata iseries_md = {
+define_machine(iseries) {
+ .name = "iSeries",
.setup_arch = iSeries_setup_arch,
.show_cpuinfo = iSeries_show_cpuinfo,
.init_IRQ = iSeries_init_IRQ,
@@ -930,7 +932,6 @@
/* /chosen */
dt_start_node(dt, "chosen");
- dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR);
dt_prop_str(dt, "bootargs", cmd_line);
if (cmd_mem_limit)
dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index ec5c1e1..24c0aef 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -259,9 +259,10 @@
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init maple_probe(int platform)
+static int __init maple_probe(void)
{
- if (platform != PLATFORM_MAPLE)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
@@ -274,7 +275,8 @@
return 1;
}
-struct machdep_calls __initdata maple_md = {
+define_machine(maple_md) {
+ .name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
.init_early = maple_init_early,
@@ -290,7 +292,7 @@
.get_rtc_time = maple_get_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
- .idle_loop = native_idle,
+ .power_save = power4_idle,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index fa8b4d7..eacbfd9 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -161,9 +161,7 @@
static void __init bootx_add_chosen_props(unsigned long base,
unsigned long *mem_end)
{
- u32 val = _MACH_Pmac;
-
- bootx_dt_add_prop("linux,platform", &val, 4, mem_end);
+ u32 val;
if (bootx_info->kernelParamsOffset) {
char *args = (char *)((unsigned long)bootx_info) +
@@ -493,7 +491,7 @@
&& (strcmp(model, "iMac,1") == 0
|| strcmp(model, "PowerMac1,1") == 0)) {
bootx_printf("iMac,1 detected, shutting down USB \n");
- out_le32((unsigned *)0x80880008, 1); /* XXX */
+ out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */
}
}
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index e49eddd..a5063cd 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2951,7 +2951,7 @@
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
preempt_disable();
pmac_early_vresume_proc = proc;
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 87eb6bb..e14f9ac 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1457,6 +1457,9 @@
return 0;
i2c_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
+
/* Probe keywest-i2c busses */
kw_i2c_probe();
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 5fd2899..262f967 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -74,7 +74,7 @@
* Read and write the non-volatile RAM on PowerMacs and CHRP machines.
*/
static int nvram_naddrs;
-static volatile unsigned char *nvram_data;
+static volatile unsigned char __iomem *nvram_data;
static int is_core_99;
static int core99_bank = 0;
static int nvram_partitions[3];
@@ -148,7 +148,7 @@
}
#ifdef CONFIG_PPC32
-static volatile unsigned char *nvram_addr;
+static volatile unsigned char __iomem *nvram_addr;
static int nvram_mult;
static unsigned char direct_nvram_read_byte(int addr)
@@ -285,7 +285,7 @@
int stat, i;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank);
@@ -317,7 +317,7 @@
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Writing bank %d...\n", bank);
@@ -352,7 +352,7 @@
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Erasing bank %d...\n", bank);
@@ -399,7 +399,7 @@
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Writing bank %d...\n", bank);
@@ -597,7 +597,7 @@
}
#ifdef CONFIG_PPC32
- if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+ if (machine_is(chrp) && nvram_naddrs == 1) {
nvram_data = ioremap(r1.start, s1);
nvram_mult = 1;
ppc_md.nvram_read_val = direct_nvram_read_byte;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index de3f30e..f5d8d15 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1201,7 +1201,7 @@
#ifdef CONFIG_PPC32
void pmac_pci_fixup_cardbus(struct pci_dev* dev)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
/*
* Fix the interrupt routing on the various cardbus bridges
@@ -1244,8 +1244,9 @@
* On PowerMacs, we try to switch any PCI ATA controller to
* fully native mode
*/
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
+
/* Some controllers don't have the class IDE */
if (dev->vendor == PCI_VENDOR_ID_PROMISE)
switch(dev->device) {
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index 9b7150f..a3bd3e7 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -336,6 +336,8 @@
return 0;
pfbase_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
DBG("Installing base platform functions...\n");
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 385aab9..4d15e39 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -350,6 +350,13 @@
smp_ops = &psurge_smp_ops;
#endif
#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_ADB
+ if (strstr(cmd_line, "adb_sync")) {
+ extern int __adb_probe_sync;
+ __adb_probe_sync = 1;
+ }
+#endif /* CONFIG_ADB */
}
char *bootpath;
@@ -576,30 +583,6 @@
pmac_power_off();
}
-#ifdef CONFIG_PPC32
-void __init pmac_init(void)
-{
- /* isa_io_base gets set in pmac_pci_init */
- isa_mem_base = PMAC_ISA_MEM_BASE;
- pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 1;
- DMA_MODE_WRITE = 2;
-
- ppc_md = pmac_md;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
- if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
-
-}
-#endif
-
/*
* Early initialization.
*/
@@ -646,6 +629,12 @@
{
struct device_node *np;
+ if (machine_is(chrp))
+ return -1;
+
+ if (!machine_is(powermac))
+ return 0;
+
np = of_find_node_by_name(NULL, "valkyrie");
if (np)
of_platform_device_create(np, "valkyrie", NULL);
@@ -666,12 +655,15 @@
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init pmac_probe(int platform)
+static int __init pmac_probe(void)
{
-#ifdef CONFIG_PPC64
- if (platform != PLATFORM_POWERMAC)
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "Power Macintosh") &&
+ !of_flat_dt_is_compatible(root, "MacRISC"))
return 0;
+#ifdef CONFIG_PPC64
/*
* On U3, the DART (iommu) must be allocated now since it
* has an impact on htab_initialize (due to the large page it
@@ -681,6 +673,23 @@
alloc_dart_table();
#endif
+#ifdef CONFIG_PPC32
+ /* isa_io_base gets set in pmac_pci_init */
+ isa_mem_base = PMAC_ISA_MEM_BASE;
+ pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 1;
+ DMA_MODE_WRITE = 2;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+ ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
+ ppc_ide_md.default_io_base = pmac_ide_get_base;
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
+
+#endif /* CONFIG_PPC32 */
+
#ifdef CONFIG_PMAC_SMU
/*
* SMU based G5s need some memory below 2Gb, at least the current
@@ -709,10 +718,8 @@
}
#endif
-struct machdep_calls __initdata pmac_md = {
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
- .cpu_die = generic_mach_cpu_die,
-#endif
+define_machine(powermac) {
+ .name = "PowerMac",
.probe = pmac_probe,
.setup_arch = pmac_setup_arch,
.init_early = pmac_init_early,
@@ -733,7 +740,7 @@
.progress = udbg_progress,
#ifdef CONFIG_PPC64
.pci_probe_mode = pmac_pci_probe_mode,
- .idle_loop = native_idle,
+ .power_save = power4_idle,
.enable_pmcs = power4_enable_pmcs,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
@@ -746,4 +753,7 @@
.pcibios_after_init = pmac_pcibios_after_init,
.phys_mem_access_prot = pci_phys_mem_access_prot,
#endif
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
+ .cpu_die = generic_mach_cpu_die,
+#endif
};
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 5d9afa1..890758a 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -336,10 +336,10 @@
*/
void __init pmac_calibrate_decr(void)
{
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU)
/* XXX why here? */
pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif /* CONFIG_PM */
+#endif
generic_calibrate_decr();
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index c4352a8..b4fa9f0 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -116,7 +116,7 @@
/* Setup for 57600 8N1 */
if (ch == ch_a)
addr += 0x20;
- sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
+ sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
sccc += addr & ~PAGE_MASK;
sccd = sccc + 0x10;
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 2ab9dcd..9b2b1cb 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1018,7 +1018,7 @@
{
struct proc_dir_entry *e;
- if (platform_is_pseries()) {
+ if (machine_is(pseries)) {
e = create_proc_entry("ppc64/eeh", 0, NULL);
if (e)
e->proc_fops = &proc_eeh_operations;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index b811d5f..cc2495a 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -257,6 +257,7 @@
struct pci_bus *frozen_bus;
int rc = 0;
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+ const char *pci_str, *drv_str;
frozen_dn = find_device_pe(event->dn);
frozen_bus = pcibios_find_pci_bus(frozen_dn);
@@ -291,6 +292,13 @@
frozen_pdn = PCI_DN(frozen_dn);
frozen_pdn->eeh_freeze_count++;
+
+ pci_str = pci_name (frozen_pdn->pcidev);
+ drv_str = pcid_name (frozen_pdn->pcidev);
+ if (!pci_str) {
+ pci_str = pci_name (event->dev);
+ drv_str = pcid_name (event->dev);
+ }
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto hard_fail;
@@ -306,9 +314,7 @@
eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
printk(KERN_WARNING
"EEH: This PCI device has failed %d times since last reboot: %s - %s\n",
- frozen_pdn->eeh_freeze_count,
- pci_name (frozen_pdn->pcidev),
- pcid_name(frozen_pdn->pcidev));
+ frozen_pdn->eeh_freeze_count, drv_str, pci_str);
/* Walk the various device drivers attached to this slot through
* a reset sequence, giving each an opportunity to do what it needs
@@ -360,9 +366,7 @@
"EEH: PCI device %s - %s has failed %d times \n"
"and has been permanently disabled. Please try reseating\n"
"this device or replacing it.\n",
- pci_name (frozen_pdn->pcidev),
- pcid_name(frozen_pdn->pcidev),
- frozen_pdn->eeh_freeze_count);
+ drv_str, pci_str, frozen_pdn->eeh_freeze_count);
eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 989f4bc..c01d8f0 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -91,7 +91,7 @@
continue;
/* we have a match */
- ppc64_firmware_features |=
+ powerpc_firmware_features |=
firmware_features_table[i].val;
break;
}
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 138e128..ba6befd 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -62,6 +62,11 @@
unsigned long *lbuf = (unsigned long *) buf;
long ret;
+
+ /* hcall will ret H_PARAMETER if 'count' exceeds firmware max.*/
+ if (count > MAX_VIO_PUT_CHARS)
+ count = MAX_VIO_PUT_CHARS;
+
ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
lbuf[1]);
if (ret == H_Success)
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 946ad59..e97e67f 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -120,7 +120,7 @@
int i;
unsigned int reg;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return;
printk("Using INTC for W82c105 IDE controller.\n");
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 44abdeb..6bfacc2 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
+#include <asm/firmware.h>
static struct pci_bus *
find_bus_among_children(struct pci_bus *bus,
@@ -152,20 +153,24 @@
void
pcibios_add_pci_devices(struct pci_bus * bus)
{
- int slotno, num;
+ int slotno, num, mode;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
eeh_add_device_tree_early(dn);
- if (_machine == PLATFORM_PSERIES_LPAR) {
+ mode = PCI_PROBE_NORMAL;
+ if (ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+
+ if (mode == PCI_PROBE_DEVTREE) {
/* use ofdt-based probe */
of_scan_bus(dn, bus);
if (!list_empty(&bus->devices)) {
pcibios_fixup_new_pci_devices(bus, 0);
pci_bus_add_devices(bus);
}
- } else {
+ } else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index b046bcf..9639c66 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -132,7 +132,7 @@
of_node_put(np);
}
- return 1;
+ return 0;
}
__initcall(init_ras_IRQ);
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 5ad9067..1773103 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -17,8 +17,9 @@
#include <linux/proc_fs.h>
#include <asm/prom.h>
-#include <asm/pSeries_reconfig.h>
+#include <asm/machdep.h>
#include <asm/uaccess.h>
+#include <asm/pSeries_reconfig.h>
@@ -508,7 +509,7 @@
{
struct proc_dir_entry *ent;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL);
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index a6f628d..fcc4d56 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -27,6 +27,7 @@
#include <asm/prom.h>
#include <asm/nvram.h>
#include <asm/atomic.h>
+#include <asm/machdep.h>
#if 0
#define DEBUG(A...) printk(KERN_ERR A)
@@ -481,7 +482,7 @@
{
struct proc_dir_entry *entry;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
/* No RTAS */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 44d5c7f..b2fbf8b 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -81,8 +81,8 @@
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static void pseries_shared_idle(void);
-static void pseries_dedicated_idle(void);
+static void pseries_shared_idle_sleep(void);
+static void pseries_dedicated_idle_sleep(void);
struct mpic *pSeries_mpic;
@@ -236,14 +236,13 @@
vpa_init(boot_cpuid);
if (get_lppaca()->shared_proc) {
printk(KERN_INFO "Using shared processor idle loop\n");
- ppc_md.idle_loop = pseries_shared_idle;
+ ppc_md.power_save = pseries_shared_idle_sleep;
} else {
printk(KERN_INFO "Using dedicated idle loop\n");
- ppc_md.idle_loop = pseries_dedicated_idle;
+ ppc_md.power_save = pseries_dedicated_idle_sleep;
}
} else {
printk(KERN_INFO "Using default idle loop\n");
- ppc_md.idle_loop = default_idle;
}
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -373,156 +372,123 @@
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-extern struct machdep_calls pSeries_md;
-static int __init pSeries_probe(int platform)
+static int __init pSeries_probe_hypertas(unsigned long node,
+ const char *uname, int depth,
+ void *data)
{
- if (platform != PLATFORM_PSERIES &&
- platform != PLATFORM_PSERIES_LPAR)
+ if (depth != 1 ||
+ (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0))
+ return 0;
+
+ if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
+
+ return 1;
+}
+
+static int __init pSeries_probe(void)
+{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
return 0;
- /* if we have some ppc_md fixups for LPAR to do, do
- * it here ...
- */
+ DBG("pSeries detected, looking for LPAR capability...\n");
- if (platform == PLATFORM_PSERIES_LPAR)
- ppc64_firmware_features |= FW_FEATURE_LPAR;
+ /* Now try to figure out if we are running on LPAR */
+ of_scan_flat_dt(pSeries_probe_hypertas, NULL);
+
+ DBG("Machine is%s LPAR !\n",
+ (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
return 1;
}
+
DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
-static inline void dedicated_idle_sleep(unsigned int cpu)
-{
- struct lppaca *plppaca = &lppaca[cpu ^ 1];
-
- /* Only sleep if the other thread is not idle */
- if (!(plppaca->idle)) {
- local_irq_disable();
-
- /*
- * We are about to sleep the thread and so wont be polling any
- * more.
- */
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb__after_clear_bit();
-
- /*
- * SMT dynamic mode. Cede will result in this thread going
- * dormant, if the partner thread is still doing work. Thread
- * wakes up if partner goes idle, an interrupt is presented, or
- * a prod occurs. Returning from the cede enables external
- * interrupts.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
- set_thread_flag(TIF_POLLING_NRFLAG);
- } else {
- /*
- * Give the HV an opportunity at the processor, since we are
- * not doing any work.
- */
- poll_pending();
- }
-}
-
-static void pseries_dedicated_idle(void)
+static void pseries_dedicated_idle_sleep(void)
{
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
- set_thread_flag(TIF_POLLING_NRFLAG);
- while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
- if (!need_resched()) {
- start_snooze = get_tb() +
- *smt_snooze_delay * tb_ticks_per_usec;
+ /*
+ * We come in with interrupts disabled, and need_resched()
+ * has been checked recently. If we should poll for a little
+ * while, do so.
+ */
+ if (*smt_snooze_delay) {
+ start_snooze = get_tb() +
+ *smt_snooze_delay * tb_ticks_per_usec;
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
- while (!need_resched() && !cpu_is_offline(cpu)) {
- ppc64_runlatch_off();
-
- /*
- * Go into low thread priority and possibly
- * low power mode.
- */
- HMT_low();
- HMT_very_low();
-
- if (*smt_snooze_delay != 0 &&
- get_tb() > start_snooze) {
- HMT_medium();
- dedicated_idle_sleep(cpu);
- }
-
- }
-
- HMT_medium();
+ while (get_tb() < start_snooze) {
+ if (need_resched() || cpu_is_offline(cpu))
+ goto out;
+ ppc64_runlatch_off();
+ HMT_low();
+ HMT_very_low();
}
- get_lppaca()->idle = 0;
- ppc64_runlatch_on();
-
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
-
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb();
+ local_irq_disable();
+ if (need_resched() || cpu_is_offline(cpu))
+ goto out;
}
+
+ /*
+ * Cede if the other thread is not idle, so that it can
+ * go single-threaded. If the other thread is idle,
+ * we ask the hypervisor if it has pending work it
+ * wants to do and cede if it does. Otherwise we keep
+ * polling in order to reduce interrupt latency.
+ *
+ * Doing the cede when the other thread is active will
+ * result in this thread going dormant, meaning the other
+ * thread gets to run in single-threaded (ST) mode, which
+ * is slightly faster than SMT mode with this thread at
+ * very low priority. The cede enables interrupts, which
+ * doesn't matter here.
+ */
+ if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+ cede_processor();
+
+out:
+ HMT_medium();
+ get_lppaca()->idle = 0;
}
-static void pseries_shared_idle(void)
+static void pseries_shared_idle_sleep(void)
{
- unsigned int cpu = smp_processor_id();
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
- while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ */
+ cede_processor();
- while (!need_resched() && !cpu_is_offline(cpu)) {
- local_irq_disable();
- ppc64_runlatch_off();
-
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- *
- * Check need_resched() again with interrupts disabled
- * to avoid a race.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
-
- HMT_medium();
- }
-
- get_lppaca()->idle = 0;
- ppc64_runlatch_on();
-
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
-
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- }
+ get_lppaca()->idle = 0;
}
static int pSeries_pci_probe_mode(struct pci_bus *bus)
@@ -553,7 +519,8 @@
}
#endif
-struct machdep_calls __initdata pSeries_md = {
+define_machine(pseries) {
+ .name = "pSeries",
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
.init_early = pSeries_init_early,
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index eb86cdb..4864cb3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -500,7 +500,7 @@
np;
np = of_find_node_by_type(np, "cpu")) {
ireg = (uint *)get_property(np, "reg", &ilen);
- if (ireg && ireg[0] == boot_cpuid_phys) {
+ if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s",
&ilen);
i = ilen / sizeof(int);
@@ -541,7 +541,7 @@
ops = &pSeriesLP_ops;
else {
#ifdef CONFIG_SMP
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
int hard_id;
/* FIXME: Do this dynamically! --RR */
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 3a3e302..e9a8f5d 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -61,15 +61,15 @@
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the Motorola embedded
- versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
- embedded versions (403 and 405) and the POWER3 processor.
- (For support for more recent 64-bit processors, set ARCH=powerpc.)
+ types (601, 603, 604, 740, 750, 7400), the older Freescale
+ (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+ 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+ the Book E embedded processors from IBM (44x) and Freescale (85xx).
+ For support for 64-bit processors, set ARCH=powerpc.
Unless you are building a kernel for one of the embedded processor
- systems or a POWER3-based IBM RS/6000, choose 6xx.
- Note that the kernel runs in 32-bit mode even on 64-bit chips.
- Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
- specific support for that chipset is asked later on.
+ systems, choose 6xx.
+ Also note that because the 52xx, 82xx, & 83xx family have a 603e
+ core, specific support for that chipset is asked later on.
config 40x
bool "40x"
@@ -77,10 +77,6 @@
config 44x
bool "44x"
-config POWER3
- select PPC_FPU
- bool "POWER3"
-
config 8xx
bool "8xx"
@@ -252,14 +248,9 @@
source arch/ppc/platforms/4xx/Kconfig
source arch/ppc/platforms/85xx/Kconfig
-config PPC64BRIDGE
- bool
- depends on POWER3
- default y
-
config PPC_STD_MMU
bool
- depends on 6xx || POWER3
+ depends on 6xx
default y
config NOT_COHERENT_CACHE
@@ -534,8 +525,8 @@
choice
prompt "Machine Type"
- depends on 6xx || POWER3
- default PPC_MULTIPLATFORM
+ depends on 6xx
+ default PPC_PREP
---help---
Linux currently supports several different kinds of PowerPC-based
machines: Apple Power Macintoshes and clones (such as the Motorola
@@ -545,15 +536,14 @@
Platform) machines (including all of the recent IBM RS/6000 and
pSeries machines), and several embedded PowerPC systems containing
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
- default option is to build a kernel which works on PReP and CHRP.
+ default option is to build a kernel which works on PReP.
- Note that support for Apple machines is now only available with
- ARCH=powerpc, and has been removed from this menu. If you wish
- to build a kernel for an Apple machine, exit this configuration
- process and re-run it with ARCH=powerpc.
+ Note that support for Apple and CHRP machines is now only available
+ with ARCH=powerpc, and has been removed from this menu. If you
+ wish to build a kernel for an Apple or CHRP machine, exit this
+ configuration process and re-run it with ARCH=powerpc.
- Select CHRP/PReP if configuring for an IBM RS/6000 or
- pSeries machine, or a PReP machine.
+ Select PReP if configuring for a PReP machine.
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
@@ -562,8 +552,8 @@
Select APUS if configuring for a PowerUP Amiga. More information is
available at: <http://linux-apus.sourceforge.net/>.
-config PPC_MULTIPLATFORM
- bool "CHRP/PReP"
+config PPC_PREP
+ bool "PReP"
config APUS
bool "Amiga-APUS"
@@ -715,6 +705,13 @@
much but it's only been tested on this board version. I think this
board is also known as IceCube.
+config LITE5200B
+ bool "Freescale LITE5200B"
+ depends LITE5200
+ help
+ Support for the LITE5200B dev board for the MPC5200 from Freescale.
+ This is the new board with 2 PCI slots.
+
config MPC834x_SYS
bool "Freescale MPC834x SYS"
help
@@ -800,25 +797,6 @@
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
-config PPC_CHRP
- bool "Support for CHRP (Common Hardware Reference Platform) machines"
- depends on PPC_MULTIPLATFORM
- select PPC_I8259
- select PPC_INDIRECT_PCI
- default y
-
-config PPC_PREP
- bool "Support for PReP (PowerPC Reference Platform) machines"
- depends on PPC_MULTIPLATFORM
- select PPC_I8259
- select PPC_INDIRECT_PCI
- default y
-
-config PPC_OF
- bool
- depends on PPC_CHRP
- default y
-
config PPC_GEN550
bool
depends on SANDPOINT || SPRUCE || PPLUS || \
@@ -977,14 +955,6 @@
source "fs/Kconfig.binfmt"
-config PROC_DEVICETREE
- bool "Support for Open Firmware device tree in /proc"
- depends on PPC_OF && PROC_FS
- help
- This option adds a device-tree directory under /proc which contains
- an image of the device tree that the kernel copies from Open
- Firmware. If unsure, say Y here.
-
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
depends on PPC_PREP
@@ -1177,8 +1147,7 @@
config ISA
bool "Support for ISA-bus hardware"
- depends on PPC_PREP || PPC_CHRP
- select PPC_I8259
+ depends on PPC_PREP
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1188,18 +1157,18 @@
config GENERIC_ISA_DMA
bool
- depends on POWER3 || 6xx && !CPM2
+ depends on 6xx && !CPM2
default y
config PPC_I8259
bool
- default y if 85xx
+ default y if 85xx || PPC_PREP
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx || 83xx
+ default y if 40x || 44x || 85xx || 83xx || PPC_PREP
default n
config EISA
@@ -1390,7 +1359,7 @@
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+ depends on ADVANCED_OPTIONS && !PPC_PREP
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
index 8cc75ab..f94b877 100644
--- a/arch/ppc/Kconfig.debug
+++ b/arch/ppc/Kconfig.debug
@@ -53,13 +53,6 @@
Unless you are intending to debug the kernel with one of these
machines, say N here.
-config BOOTX_TEXT
- bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends PPC_OF
- help
- Say Y here to see progress messages from the boot firmware in text
- mode. Requires either BootX or Open Firmware.
-
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 9fbdf54..0db66dc 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -40,10 +40,8 @@
CFLAGS += -mstring
endif
-cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200
@@ -59,8 +57,6 @@
head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o
head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o
-head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o
-head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \
@@ -71,7 +67,7 @@
core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/
core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/
core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
-core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/ppc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile
index 84eec0b..b739e25 100644
--- a/arch/ppc/boot/Makefile
+++ b/arch/ppc/boot/Makefile
@@ -19,14 +19,13 @@
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd
bootdir-y := simple
-bootdir-$(CONFIG_PPC_OF) += openfirmware
subdir-y := lib common images
-subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275
+subdir-$(CONFIG_PPC_PREP) += of1275
# for cleaning
-subdir- += simple openfirmware
+subdir- += simple
-hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
+hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
PHONY += $(BOOT_TARGETS) $(bootdir-y)
diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile
deleted file mode 100644
index 66b7397..0000000
--- a/arch/ppc/boot/openfirmware/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-# Makefile for making bootable images on various OpenFirmware machines.
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# Paul Mackerras January 1997
-# XCOFF bootable images for PowerMacs
-# Geert Uytterhoeven September 1997
-# ELF bootable iamges for CHRP machines.
-# Tom Rini January 2001
-# Cleaned up, moved into arch/ppc/boot/pmac
-# Tom Rini July/August 2002
-# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the
-# rules.
-
-zImage.initrd znetboot.initrd: del-ramdisk-sec := -R .ramdisk
-zImage.initrd znetboot.initrd: initrd := .initrd
-
-
-boot := arch/ppc/boot
-common := $(boot)/common
-utils := $(boot)/utils
-bootlib := $(boot)/lib
-of1275 := $(boot)/of1275
-images := $(boot)/images
-
-CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000
-
-COMMONOBJS := start.o misc.o common.o
-CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o
-
-targets := $(CHRPOBJS) dummy.o
-CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS))
-
-LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a
-
-ifdef CONFIG_SMP
-END := .smp
-endif
-ifdef CONFIG_PPC64BRIDGE
-END += .64
-endif
-
-
-$(images)/ramdisk.image.gz:
- @echo ' MISSING $@'
- @echo ' RAM disk image must be provided separately'
- @/bin/false
-
-quiet_cmd_genimage = GEN $@
- cmd_genimage = $(OBJCOPY) -R .comment \
- --add-section=.image=$(images)/vmlinux.gz \
- --set-section-flags=.image=contents,alloc,load,readonly,data $< $@
-
-targets += image.o
-$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE
- $(call if_changed,genimage)
-
-# Place the ramdisk in the initrd image.
-quiet_cmd_genimage-initrd = GEN $@
- cmd_genimage-initrd = $(OBJCOPY) $< $@ \
- --add-section=.ramdisk=$(images)/ramdisk.image.gz \
- --set-section-flags=.ramdisk=contents,alloc,load,readonly,data
-targets += image.initrd.o
-$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE
- $(call if_changed,genimage-initrd)
-
-
-targets += crt0.o
-$(obj)/crt0.o: $(common)/crt0.S FORCE
- $(call if_changed_dep,as_o_S)
-
-quiet_cmd_gen-chrp = CHRP $@
- cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \
- $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec)
-
-$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \
- $(srctree)/$(boot)/ld.script
- $(call cmd,gen-chrp)
-$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \
- $(srctree)/$(boot)/ld.script
- $(call cmd,gen-chrp)
-
-quiet_cmd_addnote = ADDNOTE $@
- cmd_addnote = cat $< > $@ && $(utils)/addnote $@
-$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \
- %-rs6k: %
- $(call cmd,addnote)
-
-# The targets used on the make command-line
-
-PHONY += zImage zImage.initrd
-zImage: $(images)/zImage.chrp \
- $(images)/zImage.chrp-rs6k
- @echo ' kernel: $@ is ready ($<)'
-zImage.initrd: $(images)/zImage.initrd.chrp \
- $(images)/zImage.initrd.chrp-rs6k
- @echo ' kernel: $@ is ready ($<)'
-
-TFTPIMAGE := /tftpboot/zImage
-
-PHONY += znetboot znetboot.initrd
-znetboot: $(images)/zImage.chrp
- cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END)
- @echo ' kernel: $@ is ready ($<)'
-znetboot.initrd:$(images)/zImage.initrd.chrp
- cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END)
- @echo ' kernel: $@ is ready ($<)'
-
diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c
deleted file mode 100644
index 245dbd9..0000000
--- a/arch/ppc/boot/openfirmware/chrpmain.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/string.h>
-#include "nonstdio.h"
-#include "of1275.h"
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/* Passed from the linker */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _start, _end;
-
-extern unsigned int heap_max;
-extern void flush_cache(void *, unsigned long);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
- unsigned int progend);
-
-char *avail_ram;
-char *begin_avail, *end_avail;
-char *avail_high;
-
-#define RAM_START 0x00000000
-#define RAM_END (64<<20)
-
-#define BOOT_START ((unsigned long)_start)
-#define BOOT_END ((unsigned long)(_end + 0xFFF) & ~0xFFF)
-
-#define RAM_FREE ((unsigned long)(_end+0x1000)&~0xFFF)
-#define PROG_START 0x00010000
-#define PROG_SIZE 0x007f0000 /* 8MB */
-
-#define SCRATCH_SIZE (128 << 10)
-
-static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */
-
-typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int);
-
-void
-boot(int a1, int a2, void *prom)
-{
- unsigned sa, len;
- void *dst;
- unsigned char *im;
- unsigned int initrd_size, initrd_start;
-
- printf("chrpboot starting: loaded at 0x%p\n\r", &_start);
-
- initrd_size = &__ramdisk_end - &__ramdisk_begin;
- if (initrd_size) {
- initrd_start = (RAM_END - initrd_size) & ~0xFFF;
- a1 = initrd_start;
- a2 = initrd_size;
- claim(initrd_start, RAM_END - initrd_start, 0);
- printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r",
- initrd_start, &__ramdisk_begin, initrd_size);
- memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size);
- } else {
- initrd_start = 0;
- initrd_size = 0;
- a2 = 0xdeadbeef;
- }
-
- im = &__image_begin;
- len = &__image_end - &__image_begin;
- /* claim 4MB starting at PROG_START */
- claim(PROG_START, PROG_SIZE - PROG_START, 0);
- dst = (void *) PROG_START;
- if (im[0] == 0x1f && im[1] == 0x8b) {
- avail_ram = scratch;
- begin_avail = avail_high = avail_ram;
- end_avail = scratch + sizeof(scratch);
- printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len);
- gunzip(dst, PROG_SIZE - PROG_START, im, &len);
- printf("done %u bytes\n\r", len);
- printf("%u bytes of heap consumed, max in use %u\n\r",
- avail_high - begin_avail, heap_max);
- } else {
- memmove(dst, im, len);
- }
-
- flush_cache(dst, len);
- make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp,
- (PROG_START + PROG_SIZE));
-
- sa = PROG_START;
- printf("start address = 0x%x\n\r", sa);
-
- (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size);
-
- printf("returned?\n\r");
-
- pause();
-}
diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c
deleted file mode 100644
index 0f46756..0000000
--- a/arch/ppc/boot/openfirmware/common.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "nonstdio.h"
-#include "of1275.h"
-#include <linux/string.h>
-#include <linux/zlib.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-
-/* Information from the linker */
-
-extern int strcmp(const char *s1, const char *s2);
-extern char *avail_ram, *avail_high;
-extern char *end_avail;
-
-unsigned int heap_use, heap_max;
-
-struct memchunk {
- unsigned int size;
- struct memchunk *next;
-};
-
-static struct memchunk *freechunks;
-
-static void *zalloc(unsigned size)
-{
- void *p;
- struct memchunk **mpp, *mp;
-
- size = (size + 7) & -8;
- heap_use += size;
- if (heap_use > heap_max)
- heap_max = heap_use;
- for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
- if (mp->size == size) {
- *mpp = mp->next;
- return mp;
- }
- }
- p = avail_ram;
- avail_ram += size;
- if (avail_ram > avail_high)
- avail_high = avail_ram;
- if (avail_ram > end_avail) {
- printf("oops... out of memory\n\r");
- pause();
- }
- return p;
-}
-
-#define HEAD_CRC 2
-#define EXTRA_FIELD 4
-#define ORIG_NAME 8
-#define COMMENT 0x10
-#define RESERVED 0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
- z_stream s;
- int r, i, flags;
-
- /* skip header */
- i = 10;
- flags = src[3];
- if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
- printf("bad gzipped data\n\r");
- exit();
- }
- if ((flags & EXTRA_FIELD) != 0)
- i = 12 + src[10] + (src[11] << 8);
- if ((flags & ORIG_NAME) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & COMMENT) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & HEAD_CRC) != 0)
- i += 2;
- if (i >= *lenp) {
- printf("gunzip: ran out of data in header\n\r");
- exit();
- }
-
- /* Initialize ourself. */
- s.workspace = zalloc(zlib_inflate_workspacesize());
- r = zlib_inflateInit2(&s, -MAX_WBITS);
- if (r != Z_OK) {
- printf("zlib_inflateInit2 returned %d\n\r", r);
- exit();
- }
- s.next_in = src + i;
- s.avail_in = *lenp - i;
- s.next_out = dst;
- s.avail_out = dstlen;
- r = zlib_inflate(&s, Z_FINISH);
- if (r != Z_OK && r != Z_STREAM_END) {
- printf("inflate returned %d msg: %s\n\r", r, s.msg);
- exit();
- }
- *lenp = s.next_out - (unsigned char *) dst;
- zlib_inflateEnd(&s);
-}
-
-/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID,
- * a machine type for BI_MACHTYPE, and the location where the end of the
- * bootloader is (PROG_START + PROG_SIZE)
- */
-void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
- unsigned long progend)
-{
- struct bi_record *rec;
-
-
- /* leave a 1MB gap then align to the next 1MB boundary */
- addr = _ALIGN(addr+ (1<<20) - 1, (1<<20));
- /* oldworld machine seem very unhappy about this. -- Tom */
- if (addr >= progend)
- claim(addr, 0x1000, 0);
-
- rec = (struct bi_record *)addr;
- rec->tag = BI_FIRST;
- rec->size = sizeof(struct bi_record);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_BOOTLOADER_ID;
- sprintf( (char *)rec->data, name);
- rec->size = sizeof(struct bi_record) + strlen(name) + 1;
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_MACHTYPE;
- rec->data[0] = mach;
- rec->data[1] = 1;
- rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_LAST;
- rec->size = sizeof(struct bi_record);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-}
diff --git a/arch/ppc/boot/openfirmware/dummy.c b/arch/ppc/boot/openfirmware/dummy.c
deleted file mode 100644
index 31dbf45..0000000
--- a/arch/ppc/boot/openfirmware/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
- return 0;
-}
diff --git a/arch/ppc/boot/openfirmware/misc.S b/arch/ppc/boot/openfirmware/misc.S
deleted file mode 100644
index ab9e897..0000000
--- a/arch/ppc/boot/openfirmware/misc.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
- .text
-
-/*
- * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to
- * the address given as the 1st argument.
- */
- .globl setup_bats
-setup_bats:
- mfpvr 5
- rlwinm 5,5,16,16,31 /* r3 = 1 for 601, 4 for 604 */
- cmpwi 0,5,1
- li 0,0
- bne 4f
- mtibatl 3,0 /* invalidate BAT first */
- ori 3,3,4 /* set up BAT registers for 601 */
- li 4,0x7f
- mtibatu 2,3
- mtibatl 2,4
- oris 3,3,0x80
- oris 4,4,0x80
- mtibatu 3,3
- mtibatl 3,4
- b 5f
-4: mtdbatu 3,0 /* invalidate BATs first */
- mtibatu 3,0
- ori 3,3,0xff /* set up BAT registers for 604 */
- li 4,2
- mtdbatl 2,4
- mtdbatu 2,3
- mtibatl 2,4
- mtibatu 2,3
- oris 3,3,0x80
- oris 4,4,0x80
- mtdbatl 3,4
- mtdbatu 3,3
- mtibatl 3,4
- mtibatu 3,3
-5: sync
- isync
- blr
-
-/*
- * Flush the dcache and invalidate the icache for a range of addresses.
- *
- * flush_cache(addr, len)
- */
- .global flush_cache
-flush_cache:
- addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */
- rlwinm. 4,4,27,5,31
- mtctr 4
- beqlr
-1: dcbf 0,3
- icbi 0,3
- addi 3,3,0x20
- bdnz 1b
- sync
- isync
- blr
diff --git a/arch/ppc/boot/openfirmware/start.c b/arch/ppc/boot/openfirmware/start.c
deleted file mode 100644
index 1617a26..0000000
--- a/arch/ppc/boot/openfirmware/start.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <stdarg.h>
-#include "of1275.h"
-
-extern int strlen(const char *s);
-extern void boot(int a1, int a2, void *prom);
-
-phandle stdin;
-phandle stdout;
-phandle stderr;
-
-void printk(char *fmt, ...);
-
-void
-start(int a1, int a2, void *promptr)
-{
- ofinit(promptr);
- if (ofstdio(&stdin, &stdout, &stderr))
- exit();
-
- boot(a1, a2, promptr);
- for (;;)
- exit();
-}
-
-int writestring(void *f, char *ptr, int nb)
-{
- int w = 0, i;
- char *ret = "\r";
-
- for (i = 0; i < nb; ++i) {
- if (ptr[i] == '\n') {
- if (i > w) {
- write(f, ptr + w, i - w);
- w = i;
- }
- write(f, ret, 1);
- }
- }
- if (w < nb)
- write(f, ptr + w, nb - w);
- return nb;
-}
-
-int
-putc(int c, void *f)
-{
- char ch = c;
-
- return writestring(f, &ch, 1) == 1? c: -1;
-}
-
-int
-putchar(int c)
-{
- return putc(c, stdout);
-}
-
-int
-fputs(char *str, void *f)
-{
- int n = strlen(str);
-
- return writestring(f, str, n) == n? 0: -1;
-}
-
-int
-readchar(void)
-{
- char ch;
-
- for (;;) {
- switch (read(stdin, &ch, 1)) {
- case 1:
- return ch;
- case -1:
- printk("read(stdin) returned -1\n");
- return -1;
- }
- }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-getchar(void)
-{
- int c;
-
- if (lineleft == 0) {
- lineptr = line;
- for (;;) {
- c = readchar();
- if (c == -1 || c == 4)
- break;
- if (c == '\r' || c == '\n') {
- *lineptr++ = '\n';
- putchar('\n');
- break;
- }
- switch (c) {
- case 0177:
- case '\b':
- if (lineptr > line) {
- putchar('\b');
- putchar(' ');
- putchar('\b');
- --lineptr;
- }
- break;
- case 'U' & 0x1F:
- while (lineptr > line) {
- putchar('\b');
- putchar(' ');
- putchar('\b');
- --lineptr;
- }
- break;
- default:
- if (lineptr >= &line[sizeof(line) - 1])
- putchar('\a');
- else {
- putchar(c);
- *lineptr++ = c;
- }
- }
- }
- lineleft = lineptr - line;
- lineptr = line;
- }
- if (lineleft == 0)
- return -1;
- --lineleft;
- return *lineptr++;
-}
-
-extern int vsprintf(char *buf, const char *fmt, va_list args);
-static char sprint_buf[1024];
-
-void
-printk(char *fmt, ...)
-{
- va_list args;
- int n;
-
- va_start(args, fmt);
- n = vsprintf(sprint_buf, fmt, args);
- va_end(args);
- writestring(stdout, sprint_buf, n);
-}
-
-int
-printf(char *fmt, ...)
-{
- va_list args;
- int n;
-
- va_start(args, fmt);
- n = vsprintf(sprint_buf, fmt, args);
- va_end(args);
- writestring(stdout, sprint_buf, n);
- return n;
-}
diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c
index c242908..8da8f57 100644
--- a/arch/ppc/boot/simple/mpc10x_memory.c
+++ b/arch/ppc/boot/simple/mpc10x_memory.c
@@ -50,10 +50,10 @@
* the system. This assumes that the firmware has correctly set up the memory
* controller registers. On CONFIG_PPC_PREP, we know we are being called
* under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename
+ * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename
* this function.
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
#define get_mem_size mpc10x_get_mem_size
#endif
unsigned long
diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
index 7efddc5..2533113 100644
--- a/arch/ppc/boot/simple/relocate.S
+++ b/arch/ppc/boot/simple/relocate.S
@@ -194,7 +194,7 @@
/*
* Start at the begining.
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
li r9,0xc
mtlr r9
/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
diff --git a/arch/ppc/boot/utils/addnote.c b/arch/ppc/boot/utils/addnote.c
deleted file mode 100644
index 6c52b18..0000000
--- a/arch/ppc/boot/utils/addnote.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Program to hack in a PT_NOTE program header entry in an ELF file.
- * This is needed for OF on RS/6000s to load an image correctly.
- * Note that OF needs a program header entry for the note, not an
- * ELF section.
- *
- * Copyright 2000 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Usage: addnote zImage
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-
-char arch[] = "PowerPC";
-
-#define N_DESCR 6
-unsigned int descr[N_DESCR] = {
-#if 1
- /* values for IBM RS/6000 machines */
- 0xffffffff, /* real-mode = true */
- 0x00c00000, /* real-base, i.e. where we expect OF to be */
- 0xffffffff, /* real-size */
- 0xffffffff, /* virt-base */
- 0xffffffff, /* virt-size */
- 0x4000, /* load-base */
-#else
- /* values for longtrail CHRP */
- 0, /* real-mode = false */
- 0xffffffff, /* real-base */
- 0xffffffff, /* real-size */
- 0xffffffff, /* virt-base */
- 0xffffffff, /* virt-size */
- 0x00600000, /* load-base */
-#endif
-};
-
-unsigned char buf[512];
-
-#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
- buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
- PUT_16BE((off) + 2, (v)))
-
-/* Structure of an ELF file */
-#define E_IDENT 0 /* ELF header */
-#define E_PHOFF 28
-#define E_PHENTSIZE 42
-#define E_PHNUM 44
-#define E_HSIZE 52 /* size of ELF header */
-
-#define EI_MAGIC 0 /* offsets in E_IDENT area */
-#define EI_CLASS 4
-#define EI_DATA 5
-
-#define PH_TYPE 0 /* ELF program header */
-#define PH_OFFSET 4
-#define PH_FILESZ 16
-#define PH_HSIZE 32 /* size of program header */
-
-#define PT_NOTE 4 /* Program header type = note */
-
-#define ELFCLASS32 1
-#define ELFDATA2MSB 2
-
-unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
-
-int main(int ac, char **av)
-{
- int fd, n, i;
- int ph, ps, np;
- int nnote, ns;
-
- if (ac != 2) {
- fprintf(stderr, "Usage: %s elf-file\n", av[0]);
- exit(1);
- }
- fd = open(av[1], O_RDWR);
- if (fd < 0) {
- perror(av[1]);
- exit(1);
- }
-
- nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4;
-
- n = read(fd, buf, sizeof(buf));
- if (n < 0) {
- perror("read");
- exit(1);
- }
-
- if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
- goto notelf;
-
- if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
- || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
- fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[1]);
- exit(1);
- }
-
- ph = GET_32BE(E_PHOFF);
- ps = GET_16BE(E_PHENTSIZE);
- np = GET_16BE(E_PHNUM);
- if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
- goto notelf;
- if (ph + (np + 1) * ps + nnote > n)
- goto nospace;
-
- for (i = 0; i < np; ++i) {
- if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
- fprintf(stderr, "%s already has a note entry\n",
- av[1]);
- exit(0);
- }
- ph += ps;
- }
-
- /* XXX check that the area we want to use is all zeroes */
- for (i = 0; i < ps + nnote; ++i)
- if (buf[ph + i] != 0)
- goto nospace;
-
- /* fill in the program header entry */
- ns = ph + ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote);
-
- /* fill in the note area we point to */
- /* XXX we should probably make this a proper section */
- PUT_32BE(ns, strlen(arch) + 1);
- PUT_32BE(ns + 4, N_DESCR * 4);
- PUT_32BE(ns + 8, 0x1275);
- strcpy(&buf[ns + 12], arch);
- ns += 12 + strlen(arch) + 1;
- for (i = 0; i < N_DESCR; ++i)
- PUT_32BE(ns + i * 4, descr[i]);
-
- /* Update the number of program headers */
- PUT_16BE(E_PHNUM, np + 1);
-
- /* write back */
- lseek(fd, (long) 0, SEEK_SET);
- i = write(fd, buf, n);
- if (i < 0) {
- perror("write");
- exit(1);
- }
- if (i < n) {
- fprintf(stderr, "%s: write truncated\n", av[1]);
- exit(1);
- }
-
- exit(0);
-
- notelf:
- fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]);
- exit(1);
-
- nospace:
- fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
- av[0]);
- exit(1);
-}
diff --git a/arch/ppc/boot/utils/hack-coff.c b/arch/ppc/boot/utils/hack-coff.c
deleted file mode 100644
index 5e5a657..0000000
--- a/arch/ppc/boot/utils/hack-coff.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * hack-coff.c - hack the header of an xcoff file to fill in
- * a few fields needed by the Open Firmware xcoff loader on
- * Power Macs but not initialized by objcopy.
- *
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include "rs6000.h"
-
-#define AOUT_MAGIC 0x010b
-
-#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \
- + ((unsigned char *)(x))[1])
-#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \
- ((unsigned char *)(x))[1] = (v) & 0xff)
-#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \
- + (((unsigned char *)(x))[1] << 16) \
- + (((unsigned char *)(x))[2] << 8) \
- + ((unsigned char *)(x))[3])
-
-int
-main(int ac, char **av)
-{
- int fd;
- int i, nsect;
- int aoutsz;
- struct external_filehdr fhdr;
- AOUTHDR aout;
- struct external_scnhdr shdr;
-
- if (ac != 2) {
- fprintf(stderr, "Usage: hack-coff coff-file\n");
- exit(1);
- }
- if ((fd = open(av[1], 2)) == -1) {
- perror(av[2]);
- exit(1);
- }
- if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr))
- goto readerr;
- i = get_16be(fhdr.f_magic);
- if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) {
- fprintf(stderr, "%s: not an xcoff file\n", av[1]);
- exit(1);
- }
- aoutsz = get_16be(fhdr.f_opthdr);
- if (read(fd, &aout, aoutsz) != aoutsz)
- goto readerr;
- nsect = get_16be(fhdr.f_nscns);
- for (i = 0; i < nsect; ++i) {
- if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr))
- goto readerr;
- if (strcmp(shdr.s_name, ".text") == 0) {
- put_16be(aout.o_snentry, i+1);
- put_16be(aout.o_sntext, i+1);
- } else if (strcmp(shdr.s_name, ".data") == 0) {
- put_16be(aout.o_sndata, i+1);
- } else if (strcmp(shdr.s_name, ".bss") == 0) {
- put_16be(aout.o_snbss, i+1);
- }
- }
- put_16be(aout.magic, AOUT_MAGIC);
- if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1
- || write(fd, &aout, aoutsz) != aoutsz) {
- fprintf(stderr, "%s: write error\n", av[1]);
- exit(1);
- }
- close(fd);
- exit(0);
-
-readerr:
- fprintf(stderr, "%s: read error or file too short\n", av[1]);
- exit(1);
-}
diff --git a/arch/ppc/boot/utils/mknote.c b/arch/ppc/boot/utils/mknote.c
deleted file mode 100644
index b9fbb2c..0000000
--- a/arch/ppc/boot/utils/mknote.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) Cort Dougan 1999.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Generate a note section as per the CHRP specification.
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff );
-
-int main(void)
-{
-/* header */
- /* namesz */
- PL(strlen("PowerPC")+1);
- /* descrsz */
- PL(6*4);
- /* type */
- PL(0x1275);
- /* name */
- printf("PowerPC"); printf("%c", 0);
-
-/* descriptor */
- /* real-mode */
- PL(0xffffffff);
- /* real-base */
- PL(0x00c00000);
- /* real-size */
- PL(0xffffffff);
- /* virt-base */
- PL(0xffffffff);
- /* virt-size */
- PL(0xffffffff);
- /* load-base */
- PL(0x4000);
- return 0;
-}
diff --git a/arch/ppc/configs/ibmchrp_defconfig b/arch/ppc/configs/ibmchrp_defconfig
deleted file mode 100644
index 27f3e69..0000000
--- a/arch/ppc/configs/ibmchrp_defconfig
+++ /dev/null
@@ -1,875 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_RAW=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_BOOTX_TEXT is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig
deleted file mode 100644
index a2db8b5..0000000
--- a/arch/ppc/configs/pmac_defconfig
+++ /dev/null
@@ -1,1591 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Wed Jul 13 14:13:13 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PMAC=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_PM=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
-CONFIG_SCSI_MAC53C94=y
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_PMAC_BACKLIGHT=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
-CONFIG_BMAC=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_KEYWEST=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-CONFIG_FB_CONTROL=y
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
-# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-# CONFIG_FB_ATY_XL_INIT is not set
-CONFIG_FB_ATY_GX=y
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-CONFIG_FB_3DFX_ACCEL=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-CONFIG_DMASOUND_PMAC=m
-CONFIG_DMASOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA PowerMac devices
-#
-CONFIG_SND_POWERMAC=m
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_USX2Y=m
-
-#
-# PCMCIA devices
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig
deleted file mode 100644
index a1ef929..0000000
--- a/arch/ppc/configs/power3_defconfig
+++ /dev/null
@@ -1,1035 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_POWER3=y
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC64BRIDGE=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-CONFIG_SMP=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_NR_CPUS=32
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
-# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-CONFIG_GAMEPORT=m
-CONFIG_SOUND_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
-# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461x is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_KEYWEST is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-CONFIG_FB_MATROX_I2C=y
-# CONFIG_FB_MATROX_MAVEN is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-# CONFIG_DMASOUND_PMAC is not set
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
-#
-# PCI devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-CONFIG_SND_CS46XX=m
-# CONFIG_SND_CS46XX_NEW_DSP is not set
-CONFIG_SND_CS4281=m
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VX222 is not set
-
-#
-# ALSA PowerMac devices
-#
-# CONFIG_SND_POWERMAC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/prep_defconfig
similarity index 100%
rename from arch/ppc/configs/common_defconfig
rename to arch/ppc/configs/prep_defconfig
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index e399bbb..466437f 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -1,48 +1,24 @@
#
# Makefile for the linux kernel.
#
-ifneq ($(CONFIG_PPC_MERGE),y)
-
extra-$(CONFIG_PPC_STD_MMU) := head.o
extra-$(CONFIG_40x) := head_4xx.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
-extra-$(CONFIG_6xx) += idle_6xx.o
extra-y += vmlinux.lds
-obj-y := entry.o traps.o idle.o time.o misc.o \
+obj-y := entry.o traps.o time.o misc.o \
setup.o \
ppc_htab.o
-obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
-obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
+obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
-obj-$(CONFIG_TAU) += temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
-endif
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
ifndef CONFIG_MATH_EMULATION
obj-$(CONFIG_8xx) += softemu8xx.o
endif
-
-# These are here while we do the architecture merge
-
-else
-obj-y := idle.o
-obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
-obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
-obj-$(CONFIG_KGDB) += ppc-stub.o
-obj-$(CONFIG_TAU) += temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
-endif
-endif
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 3a28159..5891ecb 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -135,10 +135,10 @@
mfspr r11,SPRN_HID0
mtcr r11
BEGIN_FTR_SECTION
- bt- 8,power_save_6xx_restore /* Check DOZE */
+ bt- 8,4f /* Check DOZE */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
- bt- 9,power_save_6xx_restore /* Check NAP */
+ bt- 9,4f /* Check NAP */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@
SYNC
RFI /* jump to handler, enable MMU */
+#ifdef CONFIG_6xx
+4: b power_save_6xx_restore
+#endif
+
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
@@ -926,55 +930,3 @@
b 4b
.comm ee_restarts,4
-
-/*
- * PROM code for specific machines follows. Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_OF
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
- stwu r1,-INT_FRAME_SIZE(r1)
- mflr r0
- stw r0,INT_FRAME_SIZE+4(r1)
- lis r4,rtas_data@ha
- lwz r4,rtas_data@l(r4)
- lis r6,1f@ha /* physical return address for rtas */
- addi r6,r6,1f@l
- tophys(r6,r6)
- tophys(r7,r1)
- lis r8,rtas_entry@ha
- lwz r8,rtas_entry@l(r8)
- mfmsr r9
- stw r9,8(r1)
- LOAD_MSR_KERNEL(r0,MSR_KERNEL)
- SYNC /* disable interrupts so SRR0/1 */
- MTMSRD(r0) /* don't get trashed */
- li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
- mtlr r6
- CLR_TOP32(r7)
- mtspr SPRN_SPRG2,r7
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI
-1: tophys(r9,r1)
- lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */
- lwz r9,8(r9) /* original msr value */
- FIX_SRR1(r9,r0)
- addi r1,r1,INT_FRAME_SIZE
- li r0,0
- mtspr SPRN_SPRG2,r0
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI /* return to caller */
-
- .globl machine_check_in_rtas
-machine_check_in_rtas:
- twi 31,0,0
- /* XXX load up BATs and panic */
-
-#endif /* CONFIG_PPC_OF */
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 53ea845..01303ef 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -37,19 +37,6 @@
#include <asm/amigappc.h>
#endif
-#ifdef CONFIG_PPC64BRIDGE
-#define LOAD_BAT(n, reg, RA, RB) \
- ld RA,(n*32)+0(reg); \
- ld RB,(n*32)+8(reg); \
- mtspr SPRN_IBAT##n##U,RA; \
- mtspr SPRN_IBAT##n##L,RB; \
- ld RA,(n*32)+16(reg); \
- ld RB,(n*32)+24(reg); \
- mtspr SPRN_DBAT##n##U,RA; \
- mtspr SPRN_DBAT##n##L,RB; \
-
-#else /* CONFIG_PPC64BRIDGE */
-
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -66,7 +53,6 @@
mtspr SPRN_DBAT##n##U,RA; \
mtspr SPRN_DBAT##n##L,RB; \
1:
-#endif /* CONFIG_PPC64BRIDGE */
.text
.stabs "arch/ppc/kernel/",N_SO,0,0,0f
@@ -129,11 +115,6 @@
.globl __start
__start:
-/*
- * We have to do any OF calls before we map ourselves to KERNELBASE,
- * because OF may have I/O devices mapped into that area
- * (particularly on CHRP).
- */
mr r31,r3 /* save parameters */
mr r30,r4
mr r29,r5
@@ -148,14 +129,6 @@
*/
bl early_init
-/*
- * On POWER4, we first need to tweak some CPU configuration registers
- * like real mode cache inhibit or exception base
- */
-#ifdef CONFIG_POWER4
- bl __970_cpu_preinit
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_APUS
/* On APUS the __va/__pa constants need to be set to the correct
* values before continuing.
@@ -169,7 +142,6 @@
*/
bl mmu_off
__after_mmu_off:
-#ifndef CONFIG_POWER4
bl clear_bats
bl flush_tlbs
@@ -177,10 +149,6 @@
#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
-#else /* CONFIG_POWER4 */
- bl reloc_offset
- bl initial_mm_power4
-#endif /* CONFIG_POWER4 */
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -192,18 +160,11 @@
bl reloc_offset
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- bl reloc_offset
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
- * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
- * the exception vectors at 0 (and therefore this copy
- * overwrites OF's exception vectors with our own).
* If the MMU is already turned on, we copy stuff to KERNELBASE,
* otherwise we copy it to 0.
*/
@@ -358,51 +319,19 @@
#endif
/* Machine check */
-/*
- * On CHRP, this is complicated by the fact that we could get a
- * machine check inside RTAS, and we have no guarantee that certain
- * critical registers will have the values we expect. The set of
- * registers that might have bad values includes all the GPRs
- * and all the BATs. We indicate that we are in RTAS by putting
- * a non-zero value, the address of the exception frame to use,
- * in SPRG2. The machine check handler checks SPRG2 and uses its
- * value if it is non-zero. If we ever needed to free up SPRG2,
- * we could use a field in the thread_info or thread_struct instead.
- * (Other exception handlers assume that r1 is a valid kernel stack
- * pointer when we take an exception from supervisor mode.)
- * -- paulus.
- */
. = 0x200
mtspr SPRN_SPRG0,r10
mtspr SPRN_SPRG1,r11
mfcr r10
-#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
- cmpwi 0,r11,0
- bne 7f
-#endif /* CONFIG_PPC_CHRP */
EXCEPTION_PROLOG_1
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
- cmpwi cr1,r4,0
- bne cr1,1f
-#endif
EXC_XFER_STD(0x200, machine_check_exception)
-#ifdef CONFIG_PPC_CHRP
-1: b machine_check_in_rtas
-#endif
/* Data access exception. */
. = 0x300
-#ifdef CONFIG_PPC64BRIDGE
- b DataAccess
-DataAccessCont:
-#else
DataAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
mfspr r10,SPRN_DSISR
andis. r0,r10,0xa470 /* weird error? */
bne 1f /* if not, try to put a PTE */
@@ -414,21 +343,10 @@
mfspr r4,SPRN_DAR
EXC_XFER_EE_LITE(0x300, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on data access. */
- . = 0x380
- b DataSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* Instruction access exception. */
. = 0x400
-#ifdef CONFIG_PPC64BRIDGE
- b InstructionAccess
-InstructionAccessCont:
-#else
InstructionAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
andis. r0,r9,0x4000 /* no pte found? */
beq 1f /* if so, try to put a PTE */
li r3,0 /* into the hash table */
@@ -438,12 +356,6 @@
mr r5,r9
EXC_XFER_EE_LITE(0x400, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on instruction access. */
- . = 0x480
- b InstructionSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* External interrupt */
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
@@ -708,15 +620,9 @@
EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_POWER4
- EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE)
- EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
-#else /* !CONFIG_POWER4 */
EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_POWER4 */
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
@@ -754,28 +660,6 @@
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-#ifdef CONFIG_PPC64BRIDGE
-DataAccess:
- EXCEPTION_PROLOG
- b DataAccessCont
-
-InstructionAccess:
- EXCEPTION_PROLOG
- b InstructionAccessCont
-
-DataSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- EXC_XFER_STD(0x380, unknown_exception)
-
-InstructionSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x480, unknown_exception)
-#endif /* CONFIG_PPC64BRIDGE */
-
#ifdef CONFIG_ALTIVEC
/* Note that the AltiVec support is closely modeled after the FP
* support. Changes to one are likely to be applicable to the
@@ -1048,13 +932,6 @@
.globl __secondary_start
__secondary_start:
-#ifdef CONFIG_PPC64BRIDGE
- mfmsr r0
- clrldi r0,r0,1 /* make sure it's in 32-bit mode */
- SYNC
- MTMSRD(r0)
- isync
-#endif
/* Copy some CPU settings from CPU 0 */
bl __restore_cpu_setup
@@ -1065,10 +942,6 @@
lis r3,-KERNELBASE@h
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- lis r3,-KERNELBASE@h
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
/* get current_thread_info and current */
lis r1,secondary_ti@ha
@@ -1109,12 +982,12 @@
* Those generic dummy functions are kept for CPUs not
* included in CONFIG_6xx
*/
-#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+#if !defined(CONFIG_6xx)
_GLOBAL(__save_cpu_setup)
blr
_GLOBAL(__restore_cpu_setup)
blr
-#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+#endif /* !defined(CONFIG_6xx) */
/*
@@ -1132,11 +1005,6 @@
tophys(r6,r6)
lwz r6,_SDR1@l(r6)
mtspr SPRN_SDR1,r6
-#ifdef CONFIG_PPC64BRIDGE
- /* clear the ASR so we only use the pseudo-segment registers. */
- li r6,0
- mtasr r6
-#endif /* CONFIG_PPC64BRIDGE */
li r0,16 /* load up segment register values */
mtctr r0 /* for context 0 */
lis r3,0x2000 /* Ku = 1, VSID = 0 */
@@ -1145,7 +1013,7 @@
addi r3,r3,0x111 /* increment VSID */
addis r4,r4,0x1000 /* address of next segment */
bdnz 3b
-#ifndef CONFIG_POWER4
+
/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
mfpvr r3
@@ -1158,7 +1026,7 @@
LOAD_BAT(1,r3,r4,r5)
LOAD_BAT(2,r3,r4,r5)
LOAD_BAT(3,r3,r4,r5)
-#endif /* CONFIG_POWER4 */
+
blr
/*
@@ -1269,9 +1137,6 @@
li r4,0
isync
3:
-#ifdef CONFIG_PPC64BRIDGE
- slbie r4
-#endif /* CONFIG_PPC64BRIDGE */
mtsrin r3,r4
addi r3,r3,0x111 /* next VSID */
rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
@@ -1358,7 +1223,6 @@
sync
RFI
-#ifndef CONFIG_POWER4
/*
* Use the first pair of BAT registers to map the 1st 16MB
* of RAM to KERNELBASE. From this point on we can't safely
@@ -1366,7 +1230,6 @@
*/
initial_bats:
lis r11,KERNELBASE@h
-#ifndef CONFIG_PPC64BRIDGE
mfspr r9,SPRN_PVR
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
cmpwi 0,r9,1
@@ -1381,7 +1244,6 @@
mtspr SPRN_IBAT1L,r10
isync
blr
-#endif /* CONFIG_PPC64BRIDGE */
4: tophys(r8,r11)
#ifdef CONFIG_SMP
@@ -1395,11 +1257,6 @@
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
#endif /* CONFIG_APUS */
-#ifdef CONFIG_PPC64BRIDGE
- /* clear out the high 32 bits in the BAT */
- clrldi r11,r11,32
- clrldi r8,r8,32
-#endif /* CONFIG_PPC64BRIDGE */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
mtspr SPRN_IBAT0L,r8
@@ -1432,38 +1289,6 @@
#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
-#else /* CONFIG_POWER4 */
-/*
- * Load up the SDR1 and segment register values now
- * since we don't have the BATs.
- * Also make sure we are running in 32-bit mode.
- */
-
-initial_mm_power4:
- addis r14,r3,_SDR1@ha /* get the value from _SDR1 */
- lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */
- mtspr SPRN_SDR1,r14
- slbia
- lis r4,0x2000 /* set pseudo-segment reg 12 */
- ori r5,r4,0x0ccc
- mtsr 12,r5
-#if 0
- ori r5,r4,0x0888 /* set pseudo-segment reg 8 */
- mtsr 8,r5 /* (for access to serial port) */
-#endif
-#ifdef CONFIG_BOOTX_TEXT
- ori r5,r4,0x0999 /* set pseudo-segment reg 9 */
- mtsr 9,r5 /* (for access to screen) */
-#endif
- mfmsr r0
- clrldi r0,r0,1
- sync
- mtmsr r0
- isync
- blr
-
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c
deleted file mode 100644
index 1be3ca5..0000000
--- a/arch/ppc/kernel/idle.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Idle daemon for PowerPC. Idle daemon will handle any action
- * that needs to be taken when the system becomes idle.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked
- * on by Tom Rini, Armin Kuster, Paul Mackerras and others.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/sysctl.h>
-#include <linux/cpu.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/cputable.h>
-#include <asm/machdep.h>
-#include <asm/smp.h>
-
-void default_idle(void)
-{
- void (*powersave)(void);
-
- powersave = ppc_md.power_save;
-
- if (!need_resched()) {
- if (powersave != NULL)
- powersave();
-#ifdef CONFIG_SMP
- else {
- set_thread_flag(TIF_POLLING_NRFLAG);
- while (!need_resched() &&
- !cpu_is_offline(smp_processor_id()))
- barrier();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- }
-#endif
- }
-}
-
-/*
- * The body of the idle task.
- */
-void cpu_idle(void)
-{
- int cpu = smp_processor_id();
-
- for (;;) {
- while (!need_resched()) {
- if (ppc_md.idle != NULL)
- ppc_md.idle();
- else
- default_idle();
- }
-
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
- }
-}
-
-#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)
-/*
- * Register the sysctl to set/clear powersave_nap.
- */
-extern int powersave_nap;
-
-static ctl_table powersave_nap_ctl_table[]={
- {
- .ctl_name = KERN_PPC_POWERSAVE_NAP,
- .procname = "powersave-nap",
- .data = &powersave_nap,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- { 0, },
-};
-static ctl_table powersave_nap_sysctl_root[] = {
- { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, },
- { 0,},
-};
-
-static int __init
-register_powersave_nap_sysctl(void)
-{
- register_sysctl_table(powersave_nap_sysctl_root, 0);
-
- return 0;
-}
-
-__initcall(register_powersave_nap_sysctl);
-#endif
diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S
deleted file mode 100644
index 1a2194c..0000000
--- a/arch/ppc/kernel/idle_6xx.S
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-#undef DEBUG
-
- .text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * Make sure no rest of NAP mode remains in HID0, save default
- * values for some CPU specific registers. Called with r24
- * containing CPU number and r3 reloc offset
- */
-_GLOBAL(init_idle_6xx)
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_HID0
- rlwinm r4,r4,0,10,8 /* Clear NAP */
- mtspr SPRN_HID0, r4
- b 1f
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
- blr
-1:
- slwi r5,r24,2
- add r5,r5,r3
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_MSSCR0
- addis r6,r5, nap_save_msscr0@ha
- stw r4,nap_save_msscr0@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_HID1
- addis r6,r5,nap_save_hid1@ha
- stw r4,nap_save_hid1@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
- blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
-_GLOBAL(ppc6xx_idle)
- /* Check if we can nap or doze, put HID0 mask in r3
- */
- lis r3, 0
-BEGIN_FTR_SECTION
- lis r3,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- lis r4,cur_cpu_spec@ha
- lwz r4,cur_cpu_spec@l(r4)
- lwz r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beq 1f
- /* Now check if user or arch enabled NAP mode */
- lis r4,powersave_nap@ha
- lwz r4,powersave_nap@l(r4)
- cmpwi 0,r4,0
- beq 1f
- lis r3,HID0_NAP@h
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
- cmpwi 0,r3,0
- beqlr
-
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
- /* Some pre-nap cleanups needed on some CPUs */
- andis. r0,r3,HID0_NAP@h
- beq 2f
-BEGIN_FTR_SECTION
- /* Disable L2 prefetch on some 745x and try to ensure
- * L2 prefetch engines are idle. As explained by errata
- * text, we can't be sure they are, we just hope very hard
- * that well be enough (sic !). At least I noticed Apple
- * doesn't even bother doing the dcbf's here...
- */
- mfspr r4,SPRN_MSSCR0
- rlwinm r4,r4,0,0,29
- sync
- mtspr SPRN_MSSCR0,r4
- sync
- isync
- lis r4,KERNELBASE@h
- dcbf 0,r4
- dcbf 0,r4
- dcbf 0,r4
- dcbf 0,r4
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
- lis r6,nap_enter_count@ha
- lwz r4,nap_enter_count@l(r6)
- addi r4,r4,1
- stw r4,nap_enter_count@l(r6)
-#endif
-2:
-BEGIN_FTR_SECTION
- /* Go to low speed mode on some 750FX */
- lis r4,powersave_lowspeed@ha
- lwz r4,powersave_lowspeed@l(r4)
- cmpwi 0,r4,0
- beq 1f
- mfspr r4,SPRN_HID1
- oris r4,r4,0x0001
- mtspr SPRN_HID1,r4
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-
- /* Go to NAP or DOZE now */
- mfspr r4,SPRN_HID0
- lis r5,(HID0_NAP|HID0_SLEEP)@h
-BEGIN_FTR_SECTION
- oris r5,r5,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
- andc r4,r4,r5
- or r4,r4,r3
-BEGIN_FTR_SECTION
- oris r4,r4,HID0_DPM@h /* that should be done once for all */
-END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
- mtspr SPRN_HID0,r4
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
- oris r7,r7,MSR_POW@h
- sync
- isync
- mtmsr r7
- isync
- sync
- blr
-
-/*
- * Return from NAP/DOZE mode, restore some CPU specific registers,
- * we are called with DR/IR still off and r2 containing physical
- * address of current.
- */
-_GLOBAL(power_save_6xx_restore)
- mfspr r11,SPRN_HID0
- rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */
- cror 4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
- rlwinm r11,r11,0,9,7 /* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
- mtspr SPRN_HID0, r11
-
-#ifdef DEBUG
- beq cr1,1f
- lis r11,(nap_return_count-KERNELBASE)@ha
- lwz r9,nap_return_count@l(r11)
- addi r9,r9,1
- stw r9,nap_return_count@l(r11)
-1:
-#endif
-
- rlwinm r9,r1,0,0,18
- tophys(r9,r9)
- lwz r11,TI_CPU(r9)
- slwi r11,r11,2
- /* Todo make sure all these are in the same page
- * and load r22 (@ha part + CPU offset) only once
- */
-BEGIN_FTR_SECTION
- beq cr1,1f
- addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha
- lwz r9,nap_save_msscr0@l(r9)
- mtspr SPRN_MSSCR0, r9
- sync
- isync
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
- addis r9,r11,(nap_save_hid1-KERNELBASE)@ha
- lwz r9,nap_save_hid1@l(r9)
- mtspr SPRN_HID1, r9
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
- b transfer_to_handler_cont
-
- .data
-
-_GLOBAL(nap_save_msscr0)
- .space 4*NR_CPUS
-
-_GLOBAL(nap_save_hid1)
- .space 4*NR_CPUS
-
-_GLOBAL(powersave_nap)
- .long 0
-_GLOBAL(powersave_lowspeed)
- .long 0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
- .space 4
-_GLOBAL(nap_return_count)
- .space 4
-#endif
diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S
deleted file mode 100644
index cc0d535..0000000
--- a/arch/ppc/kernel/idle_power4.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-#undef DEBUG
-
- .text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * So nothing for now. Called with r24 containing CPU number and r3
- * reloc offset
- */
- .globl init_idle_power4
-init_idle_power4:
- blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
- .globl power4_idle
-power4_idle:
-BEGIN_FTR_SECTION
- blr
-END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- lis r4,cur_cpu_spec@ha
- lwz r4,cur_cpu_spec@l(r4)
- lwz r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beqlr
- /* Now check if user or arch enabled NAP mode */
- lis r4,powersave_nap@ha
- lwz r4,powersave_nap@l(r4)
- cmpwi 0,r4,0
- beqlr
-
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
- /* Go to NAP now */
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
- oris r7,r7,MSR_POW@h
- sync
- isync
- mtmsr r7
- isync
- sync
- blr
-
- .globl powersave_nap
-powersave_nap:
- .long 0
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 04d04c5..809673a 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -46,9 +46,6 @@
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
-static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers.
*/
@@ -625,406 +622,13 @@
return hose;
}
-#ifdef CONFIG_PPC_OF
-/*
- * Functions below are used on OpenFirmware machines.
- */
-static void
-make_one_node_map(struct device_node* node, u8 pci_bus)
-{
- int *bus_range;
- int len;
-
- if (pci_bus >= pci_bus_count)
- return;
- bus_range = (int *) get_property(node, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, "
- "assuming it starts at 0\n", node->full_name);
- pci_to_OF_bus_map[pci_bus] = 0;
- } else
- pci_to_OF_bus_map[pci_bus] = bus_range[0];
-
- for (node=node->child; node != 0;node = node->sibling) {
- struct pci_dev* dev;
- unsigned int *class_code, *reg;
-
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
- continue;
- reg = (unsigned int *)get_property(node, "reg", NULL);
- if (!reg)
- continue;
- dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
- if (!dev || !dev->subordinate)
- continue;
- make_one_node_map(node, dev->subordinate->number);
- }
-}
-
-void
-pcibios_make_OF_bus_map(void)
-{
- int i;
- struct pci_controller* hose;
- u8* of_prop_map;
-
- pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
- if (!pci_to_OF_bus_map) {
- printk(KERN_ERR "Can't allocate OF bus map !\n");
- return;
- }
-
- /* We fill the bus map with invalid values, that helps
- * debugging.
- */
- for (i=0; i<pci_bus_count; i++)
- pci_to_OF_bus_map[i] = 0xff;
-
- /* For each hose, we begin searching bridges */
- for(hose=hose_head; hose; hose=hose->next) {
- struct device_node* node;
- node = (struct device_node *)hose->arch_data;
- if (!node)
- continue;
- make_one_node_map(node, hose->first_busno);
- }
- of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
- if (of_prop_map)
- memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
-#ifdef DEBUG
- printk("PCI->OF bus map:\n");
- for (i=0; i<pci_bus_count; i++) {
- if (pci_to_OF_bus_map[i] == 0xff)
- continue;
- printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
- }
-#endif
-}
-
-typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
-
-static struct device_node*
-scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
-{
- struct device_node* sub_node;
-
- for (; node != 0;node = node->sibling) {
- unsigned int *class_code;
-
- if (filter(node, data))
- return node;
-
- /* For PCI<->PCI bridges or CardBus bridges, we go down
- * Note: some OFs create a parent node "multifunc-device" as
- * a fake root for all functions of a multi-function device,
- * we go down them as well.
- */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
- strcmp(node->name, "multifunc-device"))
- continue;
- sub_node = scan_OF_pci_childs(node->child, filter, data);
- if (sub_node)
- return sub_node;
- }
- return NULL;
-}
-
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
-{
- unsigned int *reg;
- u8* fdata = (u8*)data;
-
- reg = (unsigned int *) get_property(node, "reg", NULL);
- if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
- && ((reg[0] >> 16) & 0xff) == fdata[0])
- return 1;
- return 0;
-}
-
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
-{
- u8 filter_data[2] = {bus, dev_fn};
-
- return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
-}
-
-/*
- * Scans the OF tree for a device node matching a PCI device
- */
-struct device_node *
-pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
-{
- struct pci_controller *hose;
- struct device_node *node;
- int busnr;
-
- if (!have_of)
- return NULL;
-
- /* Lookup the hose */
- busnr = bus->number;
- hose = pci_bus_to_hose(busnr);
- if (!hose)
- return NULL;
-
- /* Check it has an OF node associated */
- node = (struct device_node *) hose->arch_data;
- if (!node)
- return NULL;
-
- /* Fixup bus number according to what OF think it is. */
- if (pci_to_OF_bus_map)
- busnr = pci_to_OF_bus_map[busnr];
- if (busnr == 0xff)
- return NULL;
-
- /* Now, lookup childs of the hose */
- return scan_OF_childs_for_device(node->child, busnr, devfn);
-}
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-
-struct device_node*
-pci_device_to_OF_node(struct pci_dev *dev)
-{
- return pci_busdev_to_OF_node(dev->bus, dev->devfn);
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
-/* This routine is meant to be used early during boot, when the
- * PCI bus numbers have not yet been assigned, and you need to
- * issue PCI config cycles to an OF device.
- * It could also be used to "fix" RTAS config cycles if you want
- * to set pci_assign_all_buses to 1 and still use RTAS for PCI
- * config cycles.
- */
-struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
-{
- if (!have_of)
- return NULL;
- while(node) {
- struct pci_controller* hose;
- for (hose=hose_head;hose;hose=hose->next)
- if (hose->arch_data == node)
- return hose;
- node=node->parent;
- }
- return NULL;
-}
-
-static int
-find_OF_pci_device_filter(struct device_node* node, void* data)
-{
- return ((void *)node == data);
-}
-
-/*
- * Returns the PCI device matching a given OF node
- */
-int
-pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
-{
- unsigned int *reg;
- struct pci_controller* hose;
- struct pci_dev* dev = NULL;
-
- if (!have_of)
- return -ENODEV;
- /* Make sure it's really a PCI device */
- hose = pci_find_hose_for_OF_device(node);
- if (!hose || !hose->arch_data)
- return -ENODEV;
- if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
- find_OF_pci_device_filter, (void *)node))
- return -ENODEV;
- reg = (unsigned int *) get_property(node, "reg", NULL);
- if (!reg)
- return -ENODEV;
- *bus = (reg[0] >> 16) & 0xff;
- *devfn = ((reg[0] >> 8) & 0xff);
-
- /* Ok, here we need some tweak. If we have already renumbered
- * all busses, we can't rely on the OF bus number any more.
- * the pci_to_OF_bus_map is not enough as several PCI busses
- * may match the same OF bus number.
- */
- if (!pci_to_OF_bus_map)
- return 0;
-
- for_each_pci_dev(dev)
- if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
- dev->devfn == *devfn) {
- *bus = dev->bus->number;
- pci_dev_put(dev);
- return 0;
- }
-
- return -ENODEV;
-}
-EXPORT_SYMBOL(pci_device_from_OF_node);
-
-void __init
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary)
-{
- static unsigned int static_lc_ranges[256] __initdata;
- unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
- unsigned int size;
- int rlen = 0, orig_rlen;
- int memno = 0;
- struct resource *res;
- int np, na = prom_n_addr_cells(dev);
- np = na + 5;
-
- /* First we try to merge ranges to fix a problem with some pmacs
- * that can have more than 3 ranges, fortunately using contiguous
- * addresses -- BenH
- */
- dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
- if (!dt_ranges)
- return;
- /* Sanity check, though hopefully that never happens */
- if (rlen > sizeof(static_lc_ranges)) {
- printk(KERN_WARNING "OF ranges property too large !\n");
- rlen = sizeof(static_lc_ranges);
- }
- lc_ranges = static_lc_ranges;
- memcpy(lc_ranges, dt_ranges, rlen);
- orig_rlen = rlen;
-
- /* Let's work on a copy of the "ranges" property instead of damaging
- * the device-tree image in memory
- */
- ranges = lc_ranges;
- prev = NULL;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if (prev) {
- if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
- (prev[2] + prev[na+4]) == ranges[2] &&
- (prev[na+2] + prev[na+4]) == ranges[na+2]) {
- prev[na+4] += ranges[na+4];
- ranges[0] = 0;
- ranges += np;
- continue;
- }
- }
- prev = ranges;
- ranges += np;
- }
-
- /*
- * The ranges property is laid out as an array of elements,
- * each of which comprises:
- * cells 0 - 2: a PCI address
- * cells 3 or 3+4: a CPU physical address
- * (size depending on dev->n_addr_cells)
- * cells 4+5 or 5+6: the size of the range
- */
- ranges = lc_ranges;
- rlen = orig_rlen;
- while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
- res = NULL;
- size = ranges[na+4];
- switch ((ranges[0] >> 24) & 0x3) {
- case 1: /* I/O space */
- if (ranges[2] != 0)
- break;
- hose->io_base_phys = ranges[na+2];
- /* limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
- hose->io_base_virt = ioremap(ranges[na+2], size);
- if (primary)
- isa_io_base = (unsigned long) hose->io_base_virt;
- res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = ranges[2];
- DBG("PCI: IO 0x%lx -> 0x%lx\n",
- res->start, res->start + size - 1);
- break;
- case 2: /* memory space */
- memno = 0;
- if (ranges[1] == 0 && ranges[2] == 0
- && ranges[na+4] <= (16 << 20)) {
- /* 1st 16MB, i.e. ISA memory area */
- if (primary)
- isa_mem_base = ranges[na+2];
- memno = 1;
- }
- while (memno < 3 && hose->mem_resources[memno].flags)
- ++memno;
- if (memno == 0)
- hose->pci_mem_offset = ranges[na+2] - ranges[2];
- if (memno < 3) {
- res = &hose->mem_resources[memno];
- res->flags = IORESOURCE_MEM;
- if(ranges[0] & 0x40000000)
- res->flags |= IORESOURCE_PREFETCH;
- res->start = ranges[na+2];
- DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
- res->start, res->start + size - 1);
- }
- break;
- }
- if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
- }
- ranges += np;
- }
-}
-
-/* We create the "pci-OF-bus-map" property now so it appears in the
- * /proc device tree
- */
-void __init
-pci_create_OF_bus_map(void)
-{
- struct property* of_prop;
-
- of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
- if (of_prop && find_path_device("/")) {
- memset(of_prop, -1, sizeof(struct property) + 256);
- of_prop->name = "pci-OF-bus-map";
- of_prop->length = 256;
- of_prop->value = (unsigned char *)&of_prop[1];
- prom_add_property(find_path_device("/"), of_prop);
- }
-}
-
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pdev;
- struct device_node *np;
-
- pdev = to_pci_dev (dev);
- np = pci_device_to_OF_node(pdev);
- if (np == NULL || np->full_name == NULL)
- return 0;
- return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
-#else /* CONFIG_PPC_OF */
void pcibios_make_OF_bus_map(void)
{
}
-#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
void pcibios_add_platform_entries(struct pci_dev *pdev)
{
-#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_OF */
}
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
index 9b84bff..75c6450 100644
--- a/arch/ppc/kernel/ppc_htab.c
+++ b/arch/ppc/kernel/ppc_htab.c
@@ -104,7 +104,7 @@
static int ppc_htab_show(struct seq_file *m, void *v)
{
unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
+#if defined(CONFIG_PPC_STD_MMU)
unsigned int kptes = 0, uptes = 0;
PTE *ptr;
#endif /* CONFIG_PPC_STD_MMU */
@@ -133,7 +133,6 @@
return 0;
}
-#ifndef CONFIG_PPC64BRIDGE
for (ptr = Hash; ptr < Hash_end; ptr++) {
unsigned int mctx, vsid;
@@ -147,7 +146,6 @@
else
uptes++;
}
-#endif
seq_printf(m,
"PTE Hash Table Information\n"
@@ -155,20 +153,16 @@
"Buckets\t\t: %lu\n"
"Address\t\t: %08lx\n"
"Entries\t\t: %lu\n"
-#ifndef CONFIG_PPC64BRIDGE
"User ptes\t: %u\n"
"Kernel ptes\t: %u\n"
"Percent full\t: %lu%%\n"
-#endif
, (unsigned long)(Hash_size>>10),
(Hash_size/(sizeof(PTE)*8)),
(unsigned long)Hash,
Hash_size/sizeof(PTE)
-#ifndef CONFIG_PPC64BRIDGE
, uptes,
kptes,
((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-#endif
);
seq_printf(m,
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 82adb46..865ba74 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -18,7 +18,6 @@
#include <linux/bitops.h>
#include <asm/page.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -30,7 +29,6 @@
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
-#include <asm/prom.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
@@ -208,27 +206,6 @@
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_OF
-EXPORT_SYMBOL(find_devices);
-EXPORT_SYMBOL(find_type_devices);
-EXPORT_SYMBOL(find_compatible_devices);
-EXPORT_SYMBOL(find_path_device);
-EXPORT_SYMBOL(device_is_compatible);
-EXPORT_SYMBOL(machine_is_compatible);
-EXPORT_SYMBOL(find_all_nodes);
-EXPORT_SYMBOL(get_property);
-EXPORT_SYMBOL(request_OF_resource);
-EXPORT_SYMBOL(release_OF_resource);
-EXPORT_SYMBOL(of_find_node_by_name);
-EXPORT_SYMBOL(of_find_node_by_type);
-EXPORT_SYMBOL(of_find_compatible_node);
-EXPORT_SYMBOL(of_find_node_by_path);
-EXPORT_SYMBOL(of_find_all_nodes);
-EXPORT_SYMBOL(of_get_parent);
-EXPORT_SYMBOL(of_get_next_child);
-EXPORT_SYMBOL(of_node_get);
-EXPORT_SYMBOL(of_node_put);
-#endif /* CONFIG_PPC_OF */
#if defined(CONFIG_BOOTX_TEXT)
EXPORT_SYMBOL(btext_update_display);
#endif
@@ -262,9 +239,6 @@
EXPORT_SYMBOL(xmon);
EXPORT_SYMBOL(xmon_printf);
#endif
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
extern void (*debugger)(struct pt_regs *regs);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 53e9dea..1f79e84 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -1,5 +1,5 @@
/*
- * Common prep/chrp boot and setup code.
+ * Common prep boot and setup code.
*/
#include <linux/config.h>
@@ -72,17 +72,12 @@
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-
+#ifdef CONFIG_PPC_PREP
extern void prep_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
-extern void chrp_init(unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, unsigned long r7);
dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_PREP */
int have_of;
EXPORT_SYMBOL(have_of);
@@ -319,72 +314,12 @@
identify_cpu(offset, 0);
do_cpu_ftr_fixups(offset);
-#if defined(CONFIG_PPC_OF)
- reloc_got2(offset);
-
- /*
- * don't do anything on prep
- * for now, don't use bootinfo because it breaks yaboot 0.5
- * and assume that if we didn't find a magic number, we have OF
- */
- if (*(unsigned long *)(0) != 0xdeadc0de)
- phys = prom_init(r3, r4, (prom_entry)r5);
-
- reloc_got2(-offset);
-#endif
-
return phys;
}
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_PREP
/*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
- */
-int
-of_show_percpuinfo(struct seq_file *m, int i)
-{
- struct device_node *cpu_node;
- u32 *fp;
- int s;
-
- cpu_node = find_type_devices("cpu");
- if (!cpu_node)
- return 0;
- for (s = 0; s < i && cpu_node->next; s++)
- cpu_node = cpu_node->next;
- fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
- if (fp)
- seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
- return 0;
-}
-
-void __init
-intuit_machine_type(void)
-{
- char *model;
- struct device_node *root;
-
- /* ask the OF info if we're a chrp or pmac */
- root = find_path_device("/");
- if (root != 0) {
- /* assume pmac unless proven to be chrp -- Cort */
- _machine = _MACH_Pmac;
- model = get_property(root, "device_type", NULL);
- if (model && !strncmp("chrp", model, 4))
- _machine = _MACH_chrp;
- else {
- model = get_property(root, "model", NULL);
- if (model && !strncmp(model, "IBM", 3))
- _machine = _MACH_chrp;
- }
- }
-}
-#endif
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
+ * The PPC_PREP version of platform_init...
*/
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -399,161 +334,9 @@
parse_bootinfo(find_bootinfo());
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init(r3, r4, r5, r6, r7);
- return;
- }
-#endif
-
-#ifdef CONFIG_PPC_OF
- have_of = 1;
-
- /* prom_init has already been called from __start */
- if (boot_infos)
- relocate_nodes();
-
- /* If we aren't PReP, we can find out if we're Pmac
- * or CHRP with this. */
- if (_machine == 0)
- intuit_machine_type();
-
- /* finish_device_tree may need _machine defined. */
- finish_device_tree();
-
- /*
- * If we were booted via quik, r3 points to the physical
- * address of the command-line parameters.
- * If we were booted from an xcoff image (i.e. netbooted or
- * booted from floppy), we get the command line from the
- * bootargs property of the /chosen node.
- * If an initial ramdisk is present, r3 and r4
- * are used for initrd_start and initrd_size,
- * otherwise they contain 0xdeadbeef.
- */
- if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
- strlcpy(cmd_line, (char *)r3 + KERNELBASE,
- sizeof(cmd_line));
- } else if (boot_infos != 0) {
- /* booted by BootX - check for ramdisk */
- if (boot_infos->kernelParamsOffset != 0)
- strlcpy(cmd_line, (char *) boot_infos
- + boot_infos->kernelParamsOffset,
- sizeof(cmd_line));
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_infos->ramDisk) {
- initrd_start = (unsigned long) boot_infos
- + boot_infos->ramDisk;
- initrd_end = initrd_start + boot_infos->ramDiskSize;
- initrd_below_start_ok = 1;
- }
-#endif
- } else {
- struct device_node *chosen;
- char *p;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (r3 && r4 && r4 != 0xdeadbeef) {
- if (r3 < KERNELBASE)
- r3 += KERNELBASE;
- initrd_start = r3;
- initrd_end = r3 + r4;
- ROOT_DEV = Root_RAM0;
- initrd_below_start_ok = 1;
- }
-#endif
- chosen = find_devices("chosen");
- if (chosen != NULL) {
- p = get_property(chosen, "bootargs", NULL);
- if (p && *p) {
- strlcpy(cmd_line, p, sizeof(cmd_line));
- }
- }
- }
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init(r3, r4, r5, r6, r7);
- break;
-#endif
- }
-#endif /* CONFIG_PPC_OF */
+ prep_init(r3, r4, r5, r6, r7);
}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_PPC_OF
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout;
- char *name;
- int offset = 0;
-
- if (of_stdout_device == NULL)
- return -ENODEV;
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console="))
- return -EBUSY;
-
- prom_stdout = find_path_device(of_stdout_device);
- if (!prom_stdout)
- return -ENODEV;
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name)
- return -ENODEV;
-
- if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- return -ENODEV;
- }
- }
- } else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
- else
- return -ENODEV;
- return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_PREP */
struct bi_record *find_bootinfo(void)
{
@@ -589,23 +372,6 @@
initrd_end = data[0] + data[1] + KERNELBASE;
break;
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_MULTIPLATFORM
- case BI_MACHTYPE:
- /* Machine types changed with the merge. Since the
- * bootinfo are now deprecated, we can just hard code
- * the appropriate conversion here for when we are
- * called with yaboot which passes us a machine type
- * this way.
- */
- switch(data[0]) {
- case 1: _machine = _MACH_prep; break;
- case 2: _machine = _MACH_Pmac; break;
- case 4: _machine = _MACH_chrp; break;
- default:
- _machine = data[0];
- }
- break;
-#endif
case BI_MEMSIZE:
boot_mem_size = data[0];
break;
@@ -631,9 +397,6 @@
#ifdef CONFIG_6xx
ppc_md.power_save = ppc6xx_idle;
#endif
-#ifdef CONFIG_POWER4
- ppc_md.power_save = power4_idle;
-#endif
platform_init(r3, r4, r5, r6, r7);
@@ -711,7 +474,7 @@
if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
/* register CPU devices */
- for_each_cpu(i)
+ for_each_possible_cpu(i)
register_cpu(&cpu_devices[i], i, NULL);
/* call platform init */
@@ -799,7 +562,4 @@
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
index e55cdda..f77795a 100644
--- a/arch/ppc/kernel/smp.c
+++ b/arch/ppc/kernel/smp.c
@@ -311,7 +311,7 @@
/* Backup CPU 0 state */
__save_cpu_setup();
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
/* create a process for the processor */
diff --git a/arch/ppc/lib/strcase.c b/arch/ppc/lib/strcase.c
index 36b5210..3b0094c 100644
--- a/arch/ppc/lib/strcase.c
+++ b/arch/ppc/lib/strcase.c
@@ -1,4 +1,5 @@
#include <linux/ctype.h>
+#include <linux/types.h>
int strcasecmp(const char *s1, const char *s2)
{
@@ -11,7 +12,7 @@
return c1 - c2;
}
-int strncasecmp(const char *s1, const char *s2, int n)
+int strncasecmp(const char *s1, const char *s2, size_t n)
{
int c1, c2;
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
index 0217188..8e08ca3 100644
--- a/arch/ppc/mm/fault.c
+++ b/arch/ppc/mm/fault.c
@@ -202,6 +202,7 @@
/* an exec - 4xx/Book-E allows for per-page execute permission */
} else if (TRAP(regs) == 0x400) {
pte_t *ptep;
+ pmd_t *pmdp;
#if 0
/* It would be nice to actually enforce the VM execute
@@ -215,21 +216,24 @@
/* Since 4xx/Book-E supports per-page execute permission,
* we lazily flush dcache to icache. */
ptep = NULL;
- if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
- struct page *page = pte_page(*ptep);
+ if (get_pteptr(mm, address, &ptep, &pmdp)) {
+ spinlock_t *ptl = pte_lockptr(mm, pmdp);
+ spin_lock(ptl);
+ if (pte_present(*ptep)) {
+ struct page *page = pte_page(*ptep);
- if (! test_bit(PG_arch_1, &page->flags)) {
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
+ if (!test_bit(PG_arch_1, &page->flags)) {
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ pte_update(ptep, 0, _PAGE_HWEXEC);
+ _tlbie(address);
+ pte_unmap_unlock(ptep, ptl);
+ up_read(&mm->mmap_sem);
+ return 0;
}
- pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
- pte_unmap(ptep);
- up_read(&mm->mmap_sem);
- return 0;
+ pte_unmap_unlock(ptep, ptl);
}
- if (ptep != NULL)
- pte_unmap(ptep);
#endif
/* a read */
} else {
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
index f09fa88..31d0a92 100644
--- a/arch/ppc/mm/hashtable.S
+++ b/arch/ppc/mm/hashtable.S
@@ -74,12 +74,6 @@
*/
.text
_GLOBAL(hash_page)
-#ifdef CONFIG_PPC64BRIDGE
- mfmsr r0
- clrldi r0,r0,1 /* make sure it's in 32-bit mode */
- MTMSRD(r0)
- isync
-#endif
tophys(r7,0) /* gets -KERNELBASE into r7 */
#ifdef CONFIG_SMP
addis r8,r7,mmu_hash_lock@h
@@ -303,7 +297,6 @@
Hash_bits = 12 /* e.g. 256kB hash table */
Hash_msk = (((1 << Hash_bits) - 1) * 64)
-#ifndef CONFIG_PPC64BRIDGE
/* defines for the PTE format for 32-bit PPCs */
#define PTE_SIZE 8
#define PTEG_SIZE 64
@@ -317,21 +310,6 @@
#define SET_V(r) oris r,r,PTE_V@h
#define CLR_V(r,t) rlwinm r,r,0,1,31
-#else
-/* defines for the PTE format for 64-bit PPCs */
-#define PTE_SIZE 16
-#define PTEG_SIZE 128
-#define LG_PTEG_SIZE 7
-#define LDPTEu ldu
-#define STPTE std
-#define CMPPTE cmpd
-#define PTE_H 2
-#define PTE_V 1
-#define TST_V(r) andi. r,r,PTE_V
-#define SET_V(r) ori r,r,PTE_V
-#define CLR_V(r,t) li t,PTE_V; andc r,r,t
-#endif /* CONFIG_PPC64BRIDGE */
-
#define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1)
#define HASH_RIGHT 31-LG_PTEG_SIZE
@@ -349,14 +327,8 @@
END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
/* Construct the high word of the PPC-style PTE (r5) */
-#ifndef CONFIG_PPC64BRIDGE
rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
- clrlwi r3,r3,8 /* reduce vsid to 24 bits */
- sldi r5,r3,12 /* shift vsid into position */
- rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
SET_V(r5) /* set V (valid) bit */
/* Get the address of the primary PTE group in the hash table (r3) */
@@ -540,14 +512,8 @@
add r3,r3,r0 /* note code below trims to 24 bits */
/* Construct the high word of the PPC-style PTE (r11) */
-#ifndef CONFIG_PPC64BRIDGE
rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
- clrlwi r3,r3,8 /* reduce vsid to 24 bits */
- sldi r11,r3,12 /* shift vsid into position */
- rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
SET_V(r11) /* set V (valid) bit */
#ifdef CONFIG_SMP
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index cb1c294..386e000 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -412,14 +412,6 @@
}
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_OF
- /* mark the RTAS pages as reserved */
- if ( rtas_data )
- for (addr = (ulong)__va(rtas_data);
- addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ;
- addr += PAGE_SIZE)
- SetPageReserved(virt_to_page(addr));
-#endif
for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
addr += PAGE_SIZE) {
if (!PageReserved(virt_to_page(addr)))
@@ -494,11 +486,6 @@
initrd_end - initrd_start, 1);
}
#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_OF
- /* remove the RTAS pages from the available memory */
- if (rtas_data)
- mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1);
-#endif
}
/* Mark some memory as reserved by removing it from phys_avail. */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
index a8816e0..b4a4b3f 100644
--- a/arch/ppc/mm/mmu_context.c
+++ b/arch/ppc/mm/mmu_context.c
@@ -2,7 +2,7 @@
* This file contains the routines for handling the MMU on those
* PowerPC implementations where the MMU substantially follows the
* architecture specification. This includes the 6xx, 7xx, 7xxx,
- * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * 8260, and 83xx implementations but excludes the 8xx and 4xx.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 6ea9185..706bca8 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -39,7 +39,7 @@
unsigned long ioremap_bot;
int io_bat_index;
-#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
+#if defined(CONFIG_6xx)
#define HAVE_BATS 1
#endif
@@ -368,7 +368,7 @@
* the PTE pointer is unmodified if PTE is not found.
*/
int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
{
pgd_t *pgd;
pmd_t *pmd;
@@ -383,6 +383,8 @@
if (pte) {
retval = 1;
*ptep = pte;
+ if (pmdp)
+ *pmdp = pmd;
/* XXX caller needs to do pte_unmap, yuck */
}
}
@@ -420,7 +422,7 @@
mm = &init_mm;
pa = 0;
- if (get_pteptr(mm, addr, &pte)) {
+ if (get_pteptr(mm, addr, &pte, NULL)) {
pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
pte_unmap(pte);
}
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
index 9a381ed5..25bb6f3 100644
--- a/arch/ppc/mm/ppc_mmu.c
+++ b/arch/ppc/mm/ppc_mmu.c
@@ -2,7 +2,7 @@
* This file contains the routines for handling the MMU on those
* PowerPC implementations where the MMU substantially follows the
* architecture specification. This includes the 6xx, 7xx, 7xxx,
- * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * 8260, and 83xx implementations but excludes the 8xx and 4xx.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:
@@ -42,11 +42,7 @@
union ubat { /* BAT register values to be loaded */
BAT bat;
-#ifdef CONFIG_PPC64BRIDGE
- u64 word[2];
-#else
u32 word[2];
-#endif
} BATS[4][2]; /* 4 pairs of IBAT, DBAT */
struct batrange { /* stores address ranges mapped by BATs */
@@ -83,9 +79,6 @@
unsigned long __init mmu_mapin_ram(void)
{
-#ifdef CONFIG_POWER4
- return 0;
-#else
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
unsigned long align;
@@ -122,7 +115,6 @@
}
return done;
-#endif
}
/*
@@ -205,27 +197,10 @@
if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
-#ifdef CONFIG_PPC64BRIDGE
-#define LG_HPTEG_SIZE 7 /* 128 bytes per HPTEG */
-#define SDR1_LOW_BITS (lg_n_hpteg - 11)
-#define MIN_N_HPTEG 2048 /* min 256kB hash table */
-#else
#define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */
#define SDR1_LOW_BITS ((n_hpteg - 1) >> 10)
#define MIN_N_HPTEG 1024 /* min 64kB hash table */
-#endif
-#ifdef CONFIG_POWER4
- /* The hash table has already been allocated and initialized
- in prom.c */
- n_hpteg = Hash_size >> LG_HPTEG_SIZE;
- lg_n_hpteg = __ilog2(n_hpteg);
-
- /* Remove the hash table from the available memory */
- if (Hash)
- reserve_phys_mem(__pa(Hash), Hash_size);
-
-#else /* CONFIG_POWER4 */
/*
* Allow 1 HPTE (1/8 HPTEG) for each page of memory.
* This is less than the recommended amount, but then
@@ -248,7 +223,6 @@
Hash = mem_pieces_find(Hash_size, Hash_size);
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-#endif /* CONFIG_POWER4 */
Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index e8b91a3..90c6222 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -2,18 +2,10 @@
# Makefile for the linux kernel.
#
-# Extra CFLAGS so we don't have to do relative includes
-CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm
-
obj-$(CONFIG_APUS) += apus_setup.o
ifeq ($(CONFIG_APUS),y)
obj-$(CONFIG_PCI) += apus_pci.o
endif
-obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \
- chrp_pegasos_eth.o
-ifeq ($(CONFIG_PPC_CHRP),y)
-obj-$(CONFIG_NVRAM) += chrp_nvram.o
-endif
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
@@ -40,7 +32,3 @@
obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o
-
-ifeq ($(CONFIG_SMP),y)
-obj-$(CONFIG_PPC_CHRP) += chrp_smp.o
-endif
diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c
deleted file mode 100644
index 465ba9b..0000000
--- a/arch/ppc/platforms/chrp_nvram.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * /dev/nvram driver for PPC
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <asm/uaccess.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-
-static unsigned int nvram_size;
-static unsigned char nvram_buf[4];
-static DEFINE_SPINLOCK(nvram_lock);
-
-static unsigned char chrp_nvram_read(int addr)
-{
- unsigned long done, flags;
- unsigned char ret;
-
- if (addr >= nvram_size) {
- printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
- current->comm, addr, nvram_size);
- return 0xff;
- }
- spin_lock_irqsave(&nvram_lock, flags);
- if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
- ret = 0xff;
- else
- ret = nvram_buf[0];
- spin_unlock_irqrestore(&nvram_lock, flags);
-
- return ret;
-}
-
-static void chrp_nvram_write(int addr, unsigned char val)
-{
- unsigned long done, flags;
-
- if (addr >= nvram_size) {
- printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
- current->comm, addr, nvram_size);
- return;
- }
- spin_lock_irqsave(&nvram_lock, flags);
- nvram_buf[0] = val;
- if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
- printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
- spin_unlock_irqrestore(&nvram_lock, flags);
-}
-
-void __init chrp_nvram_init(void)
-{
- struct device_node *nvram;
- unsigned int *nbytes_p, proplen;
-
- nvram = of_find_node_by_type(NULL, "nvram");
- if (nvram == NULL)
- return;
-
- nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen);
- if (nbytes_p == NULL || proplen != sizeof(unsigned int))
- return;
-
- nvram_size = *nbytes_p;
-
- printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
- of_node_put(nvram);
-
- ppc_md.nvram_read_val = chrp_nvram_read;
- ppc_md.nvram_write_val = chrp_nvram_write;
-
- return;
-}
diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c
deleted file mode 100644
index c7fe618..0000000
--- a/arch/ppc/platforms/chrp_pci.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * CHRP pci routines.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/hydra.h>
-#include <asm/prom.h>
-#include <asm/gg2.h>
-#include <asm/machdep.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-
-/* LongTrail */
-void __iomem *gg2_pci_config_base;
-
-/*
- * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
- * limit the bus number to 3 bits
- */
-
-int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
- int len, u32 *val)
-{
- volatile void __iomem *cfg_data;
- struct pci_controller *hose = bus->sysdata;
-
- if (bus->number > 7)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that off is
- * suitably aligned and that len is 1, 2 or 4.
- */
- cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
- switch (len) {
- case 1:
- *val = in_8(cfg_data);
- break;
- case 2:
- *val = in_le16(cfg_data);
- break;
- default:
- *val = in_le32(cfg_data);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
- int len, u32 val)
-{
- volatile void __iomem *cfg_data;
- struct pci_controller *hose = bus->sysdata;
-
- if (bus->number > 7)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that off is
- * suitably aligned and that len is 1, 2 or 4.
- */
- cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
- switch (len) {
- case 1:
- out_8(cfg_data, val);
- break;
- case 2:
- out_le16(cfg_data, val);
- break;
- default:
- out_le32(cfg_data, val);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops gg2_pci_ops =
-{
- gg2_read_config,
- gg2_write_config
-};
-
-/*
- * Access functions for PCI config space using RTAS calls.
- */
-int
-rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- unsigned long ret = ~0UL;
- int rval;
-
- rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len);
- *val = ret;
- return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
-}
-
-int
-rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- int rval;
-
- rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val);
- return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rtas_pci_ops =
-{
- rtas_read_config,
- rtas_write_config
-};
-
-volatile struct Hydra __iomem *Hydra = NULL;
-
-int __init
-hydra_init(void)
-{
- struct device_node *np;
-
- np = find_devices("mac-io");
- if (np == NULL || np->n_addrs == 0)
- return 0;
- Hydra = ioremap(np->addrs[0].address, np->addrs[0].size);
- printk("Hydra Mac I/O at %x\n", np->addrs[0].address);
- printk("Hydra Feature_Control was %x",
- in_le32(&Hydra->Feature_Control));
- out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
- HYDRA_FC_SCSI_CELL_EN |
- HYDRA_FC_SCCA_ENABLE |
- HYDRA_FC_SCCB_ENABLE |
- HYDRA_FC_ARB_BYPASS |
- HYDRA_FC_MPIC_ENABLE |
- HYDRA_FC_SLOW_SCC_PCLK |
- HYDRA_FC_MPIC_IS_MASTER));
- printk(", now %x\n", in_le32(&Hydra->Feature_Control));
- return 1;
-}
-
-void __init
-chrp_pcibios_fixup(void)
-{
- struct pci_dev *dev = NULL;
- struct device_node *np;
-
- /* PCI interrupts are controlled by the OpenPIC */
- for_each_pci_dev(dev) {
- np = pci_device_to_OF_node(dev);
- if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
- dev->irq = np->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-}
-
-#define PRG_CL_RESET_VALID 0x00010000
-
-static void __init
-setup_python(struct pci_controller *hose, struct device_node *dev)
-{
- u32 __iomem *reg;
- u32 val;
- unsigned long addr = dev->addrs[0].address;
-
- setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010);
-
- /* Clear the magic go-slow bit */
- reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40);
- val = in_be32(®[12]);
- if (val & PRG_CL_RESET_VALID) {
- out_be32(®[12], val & ~PRG_CL_RESET_VALID);
- in_be32(®[12]);
- }
- iounmap(reg);
-}
-
-/* Marvell Discovery II based Pegasos 2 */
-static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
-{
- struct device_node *root = find_path_device("/");
- struct device_node *rtas;
-
- rtas = of_find_node_by_name (root, "rtas");
- if (rtas) {
- hose->ops = &rtas_pci_ops;
- } else {
- printk ("RTAS supporting Pegasos OF not found, please upgrade"
- " your firmware\n");
- }
- pci_assign_all_buses = 1;
-}
-
-void __init
-chrp_find_bridges(void)
-{
- struct device_node *dev;
- int *bus_range;
- int len, index = -1;
- struct pci_controller *hose;
- unsigned int *dma;
- char *model, *machine;
- int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
- struct device_node *root = find_path_device("/");
-
- /*
- * The PCI host bridge nodes on some machines don't have
- * properties to adequately identify them, so we have to
- * look at what sort of machine this is as well.
- */
- machine = get_property(root, "model", NULL);
- if (machine != NULL) {
- is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
- is_mot = strncmp(machine, "MOT", 3) == 0;
- if (strncmp(machine, "Pegasos2", 8) == 0)
- is_pegasos = 2;
- else if (strncmp(machine, "Pegasos", 7) == 0)
- is_pegasos = 1;
- }
- for (dev = root->child; dev != NULL; dev = dev->sibling) {
- if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
- continue;
- ++index;
- /* The GG2 bridge on the LongTrail doesn't have an address */
- if (dev->n_addrs < 1 && !is_longtrail) {
- printk(KERN_WARNING "Can't use %s: no address\n",
- dev->full_name);
- continue;
- }
- bus_range = (int *) get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s\n",
- dev->full_name);
- continue;
- }
- if (bus_range[1] == bus_range[0])
- printk(KERN_INFO "PCI bus %d", bus_range[0]);
- else
- printk(KERN_INFO "PCI buses %d..%d",
- bus_range[0], bus_range[1]);
- printk(" controlled by %s", dev->type);
- if (dev->n_addrs > 0)
- printk(" at %x", dev->addrs[0].address);
- printk("\n");
-
- hose = pcibios_alloc_controller();
- if (!hose) {
- printk("Can't allocate PCI controller structure for %s\n",
- dev->full_name);
- continue;
- }
- hose->arch_data = dev;
- hose->first_busno = bus_range[0];
- hose->last_busno = bus_range[1];
-
- model = get_property(dev, "model", NULL);
- if (model == NULL)
- model = "<none>";
- if (device_is_compatible(dev, "IBM,python")) {
- setup_python(hose, dev);
- } else if (is_mot
- || strncmp(model, "Motorola, Grackle", 17) == 0) {
- setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
- } else if (is_longtrail) {
- void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
- hose->ops = &gg2_pci_ops;
- hose->cfg_data = p;
- gg2_pci_config_base = p;
- } else if (is_pegasos == 1) {
- setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
- } else if (is_pegasos == 2) {
- setup_peg2(hose, dev);
- } else {
- printk("No methods for %s (model %s), using RTAS\n",
- dev->full_name, model);
- hose->ops = &rtas_pci_ops;
- }
-
- pci_process_bridge_OF_ranges(hose, dev, index == 0);
-
- /* check the first bridge for a property that we can
- use to set pci_dram_offset */
- dma = (unsigned int *)
- get_property(dev, "ibm,dma-ranges", &len);
- if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
- pci_dram_offset = dma[2] - dma[3];
- printk("pci_dram_offset = %lx\n", pci_dram_offset);
- }
- }
-
- /* Do not fixup interrupts from OF tree on pegasos */
- if (is_pegasos == 0)
- ppc_md.pcibios_fixup = chrp_pcibios_fixup;
-}
diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c
deleted file mode 100644
index 9305c8a..0000000
--- a/arch/ppc/platforms/chrp_pegasos_eth.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de>
- * Thanks to :
- * Dale Farnsworth <dale@farnsworth.org>
- * Mark A. Greer <mgreer@mvista.com>
- * Nicolas DET <nd@bplan-gmbh.de>
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * And anyone else who helped me on this.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx.h>
-#include <linux/pci.h>
-
-#define PEGASOS2_MARVELL_REGBASE (0xf1000000)
-#define PEGASOS2_MARVELL_REGSIZE (0x00004000)
-#define PEGASOS2_SRAM_BASE (0xf2000000)
-#define PEGASOS2_SRAM_SIZE (256*1024)
-
-#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE)
-#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) )
-
-
-#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4)
-#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4)
-
-#undef BE_VERBOSE
-
-static struct resource mv643xx_eth_shared_resources[] = {
- [0] = {
- .name = "ethernet shared base",
- .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
- .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
- MV643XX_ETH_SHARED_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
- .name = MV643XX_ETH_SHARED_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
- .resource = mv643xx_eth_shared_resources,
-};
-
-static struct resource mv643xx_eth0_resources[] = {
- [0] = {
- .name = "eth0 irq",
- .start = 9,
- .end = 9,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-static struct mv643xx_eth_platform_data eth0_pd = {
- .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
- .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
- .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
-
- .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE,
- .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
- .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
-};
-
-static struct platform_device eth0_device = {
- .name = MV643XX_ETH_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv643xx_eth0_resources),
- .resource = mv643xx_eth0_resources,
- .dev = {
- .platform_data = ð0_pd,
- },
-};
-
-static struct resource mv643xx_eth1_resources[] = {
- [0] = {
- .name = "eth1 irq",
- .start = 9,
- .end = 9,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
- .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
- .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
- .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
-
- .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE,
- .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
- .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
-};
-
-static struct platform_device eth1_device = {
- .name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = ARRAY_SIZE(mv643xx_eth1_resources),
- .resource = mv643xx_eth1_resources,
- .dev = {
- .platform_data = ð1_pd,
- },
-};
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
- &mv643xx_eth_shared_device,
- ð0_device,
- ð1_device,
-};
-
-/***********/
-/***********/
-#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); }
-#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset)
-
-static void __iomem *mv643xx_reg_base;
-
-static int Enable_SRAM(void)
-{
- u32 ALong;
-
- if (mv643xx_reg_base == NULL)
- mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE,
- PEGASOS2_MARVELL_REGSIZE);
-
- if (mv643xx_reg_base == NULL)
- return -ENOMEM;
-
-#ifdef BE_VERBOSE
- printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
- (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base);
-#endif
-
- MV_WRITE(MV64340_SRAM_CONFIG, 0);
-
- MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16);
-
- MV_READ(MV64340_BASE_ADDR_ENABLE, ALong);
- ALong &= ~(1 << 19);
- MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong);
-
- ALong = 0x02;
- ALong |= PEGASOS2_SRAM_BASE & 0xffff0000;
- MV_WRITE(MV643XX_ETH_BAR_4, ALong);
-
- MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000);
-
- MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
- ALong &= ~(1 << 4);
- MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
-
-#ifdef BE_VERBOSE
- printk("Pegasos II/Marvell MV64361: register unmapped\n");
- printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
-#endif
-
- iounmap(mv643xx_reg_base);
- mv643xx_reg_base = NULL;
-
- return 1;
-}
-
-
-/***********/
-/***********/
-int mv643xx_eth_add_pds(void)
-{
- int ret = 0;
- static struct pci_device_id pci_marvell_mv64360[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) },
- { }
- };
-
-#ifdef BE_VERBOSE
- printk("Pegasos II/Marvell MV64361: init\n");
-#endif
-
- if (pci_dev_present(pci_marvell_mv64360)) {
- ret = platform_add_devices(mv643xx_eth_pd_devs,
- ARRAY_SIZE(mv643xx_eth_pd_devs));
-
- if ( Enable_SRAM() < 0)
- {
- eth0_pd.tx_sram_addr = 0;
- eth0_pd.tx_sram_size = 0;
- eth0_pd.rx_sram_addr = 0;
- eth0_pd.rx_sram_size = 0;
-
- eth1_pd.tx_sram_addr = 0;
- eth1_pd.tx_sram_size = 0;
- eth1_pd.rx_sram_addr = 0;
- eth1_pd.rx_sram_size = 0;
-
-#ifdef BE_VERBOSE
- printk("Pegasos II/Marvell MV64361: Can't enable the "
- "SRAM\n");
-#endif
- }
- }
-
-#ifdef BE_VERBOSE
- printk("Pegasos II/Marvell MV64361: init is over\n");
-#endif
-
- return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c
deleted file mode 100644
index f9fd3f4..0000000
--- a/arch/ppc/platforms/chrp_setup.c
+++ /dev/null
@@ -1,669 +0,0 @@
-/*
- * Copyright (C) 1995 Linus Torvalds
- * Adapted from 'alpha' version by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/version.h>
-#include <linux/adb.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/gg2.h>
-#include <asm/pci-bridge.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/hydra.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-#include <asm/btext.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/xmon.h>
-#include "mem_pieces.h"
-
-unsigned long chrp_get_rtc_time(void);
-int chrp_set_rtc_time(unsigned long nowtime);
-void chrp_calibrate_decr(void);
-long chrp_time_init(void);
-
-void chrp_find_bridges(void);
-void chrp_event_scan(void);
-void rtas_display_progress(char *, unsigned short);
-void rtas_indicator_progress(char *, unsigned short);
-void btext_progress(char *, unsigned short);
-
-extern int of_show_percpuinfo(struct seq_file *, int);
-
-int _chrp_type;
-EXPORT_SYMBOL(_chrp_type);
-
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
-
-extern dev_t boot_dev;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-static int max_width;
-
-#ifdef CONFIG_SMP
-extern struct smp_ops_t chrp_smp_ops;
-#endif
-
-static const char *gg2_memtypes[4] = {
- "FPM", "SDRAM", "EDO", "BEDO"
-};
-static const char *gg2_cachesizes[4] = {
- "256 KB", "512 KB", "1 MB", "Reserved"
-};
-static const char *gg2_cachetypes[4] = {
- "Asynchronous", "Reserved", "Flow-Through Synchronous",
- "Pipelined Synchronous"
-};
-static const char *gg2_cachemodes[4] = {
- "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
-};
-
-int
-chrp_show_cpuinfo(struct seq_file *m)
-{
- int i, sdramen;
- unsigned int t;
- struct device_node *root;
- const char *model = "";
-
- root = find_path_device("/");
- if (root)
- model = get_property(root, "model", NULL);
- seq_printf(m, "machine\t\t: CHRP %s\n", model);
-
- /* longtrail (goldengate) stuff */
- if (!strncmp(model, "IBM,LongTrail", 13)) {
- /* VLSI VAS96011/12 `Golden Gate 2' */
- /* Memory banks */
- sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
- >>31) & 1;
- for (i = 0; i < (sdramen ? 4 : 6); i++) {
- t = in_le32(gg2_pci_config_base+
- GG2_PCI_DRAM_BANK0+
- i*4);
- if (!(t & 1))
- continue;
- switch ((t>>8) & 0x1f) {
- case 0x1f:
- model = "4 MB";
- break;
- case 0x1e:
- model = "8 MB";
- break;
- case 0x1c:
- model = "16 MB";
- break;
- case 0x18:
- model = "32 MB";
- break;
- case 0x10:
- model = "64 MB";
- break;
- case 0x00:
- model = "128 MB";
- break;
- default:
- model = "Reserved";
- break;
- }
- seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
- gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
- }
- /* L2 cache */
- t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
- seq_printf(m, "board l2\t: %s %s (%s)\n",
- gg2_cachesizes[(t>>7) & 3],
- gg2_cachetypes[(t>>2) & 3],
- gg2_cachemodes[t & 3]);
- }
- return 0;
-}
-
-/*
- * Fixes for the National Semiconductor PC78308VUL SuperI/O
- *
- * Some versions of Open Firmware incorrectly initialize the IRQ settings
- * for keyboard and mouse
- */
-static inline void __init sio_write(u8 val, u8 index)
-{
- outb(index, 0x15c);
- outb(val, 0x15d);
-}
-
-static inline u8 __init sio_read(u8 index)
-{
- outb(index, 0x15c);
- return inb(0x15d);
-}
-
-static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
- u8 type)
-{
- u8 level0, type0, active;
-
- /* select logical device */
- sio_write(device, 0x07);
- active = sio_read(0x30);
- level0 = sio_read(0x70);
- type0 = sio_read(0x71);
- if (level0 != level || type0 != type || !active) {
- printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
- "remapping to level %d, type %d, active\n",
- name, level0, type0, !active ? "in" : "", level, type);
- sio_write(0x01, 0x30);
- sio_write(level, 0x70);
- sio_write(type, 0x71);
- }
-}
-
-static void __init sio_init(void)
-{
- struct device_node *root;
-
- if ((root = find_path_device("/")) &&
- !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
- /* logical device 0 (KBC/Keyboard) */
- sio_fixup_irq("keyboard", 0, 1, 2);
- /* select logical device 1 (KBC/Mouse) */
- sio_fixup_irq("mouse", 1, 12, 2);
- }
-}
-
-
-static void __init pegasos_set_l2cr(void)
-{
- struct device_node *np;
-
- /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
- if (_chrp_type != _CHRP_Pegasos)
- return;
-
- /* Enable L2 cache if needed */
- np = find_type_devices("cpu");
- if (np != NULL) {
- unsigned int *l2cr = (unsigned int *)
- get_property (np, "l2cr", NULL);
- if (l2cr == NULL) {
- printk ("Pegasos l2cr : no cpu l2cr property found\n");
- return;
- }
- if (!((*l2cr) & 0x80000000)) {
- printk ("Pegasos l2cr : L2 cache was not active, "
- "activating\n");
- _set_L2CR(0);
- _set_L2CR((*l2cr) | 0x80000000);
- }
- }
-}
-
-void __init chrp_setup_arch(void)
-{
- struct device_node *device;
-
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000/HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- /* this is fine for chrp */
- initrd_below_start_ok = 1;
-
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
- /* On pegasos, enable the L2 cache if not already done by OF */
- pegasos_set_l2cr();
-
- /* Lookup PCI host bridges */
- chrp_find_bridges();
-
-#ifndef CONFIG_PPC64BRIDGE
- /*
- * Temporary fixes for PCI devices.
- * -- Geert
- */
- hydra_init(); /* Mac I/O */
-
-#endif /* CONFIG_PPC64BRIDGE */
-
- /*
- * Fix the Super I/O configuration
- */
- sio_init();
-
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- if ( rtas_data ) {
- struct property *p;
- device = find_devices("rtas");
- for ( p = device->properties;
- p && strncmp(p->name, "rtas-event-scan-rate", 20);
- p = p->next )
- /* nothing */ ;
- if ( p && *(unsigned long *)p->value ) {
- ppc_md.heartbeat = chrp_event_scan;
- ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1;
- ppc_md.heartbeat_count = 1;
- printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n",
- *(unsigned long *)p->value, ppc_md.heartbeat_reset );
- }
- }
-
- pci_create_OF_bus_map();
-}
-
-void
-chrp_event_scan(void)
-{
- unsigned char log[1024];
- unsigned long ret = 0;
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024 );
- ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-void
-chrp_restart(char *cmd)
-{
- printk("RTAS system-reboot returned %d\n",
- call_rtas("system-reboot", 0, 1, NULL));
- for (;;);
-}
-
-void
-chrp_power_off(void)
-{
- /* allow power on only with power button press */
- printk("RTAS power-off returned %d\n",
- call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff));
- for (;;);
-}
-
-void
-chrp_halt(void)
-{
- chrp_power_off();
-}
-
-/*
- * Finds the open-pic node and sets OpenPIC_Addr based on its reg property.
- * Then checks if it has an interrupt-ranges property. If it does then
- * we have a distributed open-pic, so call openpic_set_sources to tell
- * the openpic code where to find the interrupt source registers.
- */
-static void __init chrp_find_openpic(void)
-{
- struct device_node *np;
- int len, i;
- unsigned int *iranges;
- void __iomem *isu;
-
- np = find_type_devices("open-pic");
- if (np == NULL || np->n_addrs == 0)
- return;
- printk(KERN_INFO "OpenPIC at %x (size %x)\n",
- np->addrs[0].address, np->addrs[0].size);
- OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000);
- if (OpenPIC_Addr == NULL) {
- printk(KERN_ERR "Failed to map OpenPIC!\n");
- return;
- }
-
- iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
- if (iranges == NULL || len < 2 * sizeof(unsigned int))
- return; /* not distributed */
-
- /*
- * The first pair of cells in interrupt-ranges refers to the
- * IDU; subsequent pairs refer to the ISUs.
- */
- len /= 2 * sizeof(unsigned int);
- if (np->n_addrs < len) {
- printk(KERN_ERR "Insufficient addresses for distributed"
- " OpenPIC (%d < %d)\n", np->n_addrs, len);
- return;
- }
- if (iranges[1] != 0) {
- printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
- iranges[0], iranges[0] + iranges[1] - 1);
- openpic_set_sources(iranges[0], iranges[1], NULL);
- }
- for (i = 1; i < len; ++i) {
- iranges += 2;
- printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n",
- iranges[0], iranges[0] + iranges[1] - 1,
- np->addrs[i].address, np->addrs[i].size);
- isu = ioremap(np->addrs[i].address, np->addrs[i].size);
- if (isu != NULL)
- openpic_set_sources(iranges[0], iranges[1], isu);
- else
- printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n",
- np->addrs[i].address);
- }
-}
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-static struct irqaction xmon_irqaction = {
- .handler = xmon_irq,
- .mask = CPU_MASK_NONE,
- .name = "XMON break",
-};
-#endif
-
-void __init chrp_init_IRQ(void)
-{
- struct device_node *np;
- unsigned long chrp_int_ack = 0;
- unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- struct device_node *kbd;
-#endif
-
- for (np = find_devices("pci"); np != NULL; np = np->next) {
- unsigned int *addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL);
-
- if (addrp == NULL)
- continue;
- chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
- break;
- }
- if (np == NULL)
- printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
-
- chrp_find_openpic();
-
- if (OpenPIC_Addr) {
- prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS);
- OpenPIC_InitSenses = init_senses;
- OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
-
- openpic_init(NUM_8259_INTERRUPTS);
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
-
- }
- i8259_init(chrp_int_ack, 0);
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- /* see if there is a keyboard in the device tree
- with a parent of type "adb" */
- for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
- if (kbd->parent && kbd->parent->type
- && strcmp(kbd->parent->type, "adb") == 0)
- break;
- if (kbd)
- setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
-#endif
-}
-
-void __init
-chrp_init2(void)
-{
-#ifdef CONFIG_NVRAM
- chrp_nvram_init();
-#endif
-
- request_region(0x20,0x20,"pic1");
- request_region(0xa0,0x20,"pic2");
- request_region(0x00,0x20,"dma1");
- request_region(0x40,0x20,"timer");
- request_region(0x80,0x10,"dma page reg");
- request_region(0xc0,0x20,"dma2");
-
- if (ppc_md.progress)
- ppc_md.progress(" Have fun! ", 0x7777);
-}
-
-static struct device_node *memory_node;
-
-static int __init get_mem_prop(char *name, struct mem_pieces *mp)
-{
- struct reg_property *rp;
- int i, s;
- unsigned int *ip;
- int nac = prom_n_addr_cells(memory_node);
- int nsc = prom_n_size_cells(memory_node);
-
- ip = (unsigned int *) get_property(memory_node, name, &s);
- if (ip == NULL) {
- printk(KERN_ERR "error: couldn't get %s property on /memory\n",
- name);
- return 0;
- }
- s /= (nsc + nac) * 4;
- rp = mp->regions;
- for (i = 0; i < s; ++i, ip += nac+nsc) {
- if (nac >= 2 && ip[nac-2] != 0)
- continue;
- rp->address = ip[nac-1];
- if (nsc >= 2 && ip[nac+nsc-2] != 0)
- rp->size = ~0U;
- else
- rp->size = ip[nac+nsc-1];
- ++rp;
- }
- mp->n_regions = rp - mp->regions;
-
- /* Make sure the pieces are sorted. */
- mem_pieces_sort(mp);
- mem_pieces_coalesce(mp);
- return 1;
-}
-
-static unsigned long __init chrp_find_end_of_memory(void)
-{
- unsigned long a, total;
- struct mem_pieces phys_mem;
-
- /*
- * Find out where physical memory is, and check that it
- * starts at 0 and is contiguous. It seems that RAM is
- * always physically contiguous on Power Macintoshes.
- *
- * Supporting discontiguous physical memory isn't hard,
- * it just makes the virtual <-> physical mapping functions
- * more complicated (or else you end up wasting space
- * in mem_map).
- */
- memory_node = find_devices("memory");
- if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
- || phys_mem.n_regions == 0)
- panic("No RAM??");
- a = phys_mem.regions[0].address;
- if (a != 0)
- panic("RAM doesn't start at physical address 0");
- total = phys_mem.regions[0].size;
-
- if (phys_mem.n_regions > 1) {
- printk("RAM starting at 0x%x is not contiguous\n",
- phys_mem.regions[1].address);
- printk("Using RAM from 0 to 0x%lx\n", total-1);
- }
-
- return total;
-}
-
-void __init
-chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- struct device_node *root = find_path_device ("/");
- char *machine = NULL;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- /* take care of initrd if we have one */
- if ( r6 )
- {
- initrd_start = r6 + KERNELBASE;
- initrd_end = r6 + r7 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
- isa_io_base = CHRP_ISA_IO_BASE; /* default value */
- ppc_do_canonicalize_irqs = 1;
-
- if (root)
- machine = get_property(root, "model", NULL);
- if (machine && strncmp(machine, "Pegasos", 7) == 0) {
- _chrp_type = _CHRP_Pegasos;
- } else if (machine && strncmp(machine, "IBM", 3) == 0) {
- _chrp_type = _CHRP_IBM;
- } else if (machine && strncmp(machine, "MOT", 3) == 0) {
- _chrp_type = _CHRP_Motorola;
- } else {
- /* Let's assume it is an IBM chrp if all else fails */
- _chrp_type = _CHRP_IBM;
- }
-
- ppc_md.setup_arch = chrp_setup_arch;
- ppc_md.show_percpuinfo = of_show_percpuinfo;
- ppc_md.show_cpuinfo = chrp_show_cpuinfo;
-
- ppc_md.init_IRQ = chrp_init_IRQ;
- if (_chrp_type == _CHRP_Pegasos)
- ppc_md.get_irq = i8259_irq;
- else
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.init = chrp_init2;
-
- ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
- ppc_md.restart = chrp_restart;
- ppc_md.power_off = chrp_power_off;
- ppc_md.halt = chrp_halt;
-
- ppc_md.time_init = chrp_time_init;
- ppc_md.set_rtc_time = chrp_set_rtc_time;
- ppc_md.get_rtc_time = chrp_get_rtc_time;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
-
- ppc_md.find_end_of_memory = chrp_find_end_of_memory;
-
- if (rtas_data) {
- struct device_node *rtas;
- unsigned int *p;
-
- rtas = find_devices("rtas");
- if (rtas != NULL) {
- if (get_property(rtas, "display-character", NULL)) {
- ppc_md.progress = rtas_display_progress;
- p = (unsigned int *) get_property
- (rtas, "ibm,display-line-length", NULL);
- if (p)
- max_width = *p;
- } else if (get_property(rtas, "set-indicator", NULL))
- ppc_md.progress = rtas_indicator_progress;
- }
- }
-#ifdef CONFIG_BOOTX_TEXT
- if (ppc_md.progress == NULL && boot_text_mapped)
- ppc_md.progress = btext_progress;
-#endif
-
-#ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
-
- /*
- * Print the banner, then scroll down so boot progress
- * can be printed. -- Cort
- */
- if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
-}
-
-void
-rtas_display_progress(char *s, unsigned short hex)
-{
- int width;
- char *os = s;
-
- if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) )
- return;
-
- width = max_width;
- while ( *os )
- {
- if ( (*os == '\n') || (*os == '\r') )
- width = max_width;
- else
- width--;
- call_rtas( "display-character", 1, 1, NULL, *os++ );
- /* if we overwrite the screen length */
- if ( width == 0 )
- while ( (*os != 0) && (*os != '\n') && (*os != '\r') )
- os++;
- }
-
- /*while ( width-- > 0 )*/
- call_rtas( "display-character", 1, 1, NULL, ' ' );
-}
-
-void
-rtas_indicator_progress(char *s, unsigned short hex)
-{
- call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex);
-}
-
-#ifdef CONFIG_BOOTX_TEXT
-void
-btext_progress(char *s, unsigned short hex)
-{
- prom_print(s);
- prom_print("\n");
-}
-#endif /* CONFIG_BOOTX_TEXT */
diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c
deleted file mode 100644
index 97e5395..0000000
--- a/arch/ppc/platforms/chrp_smp.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Smp support for CHRP machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/machdep.h>
-
-extern unsigned long smp_chrp_cpu_nr;
-
-static int __init
-smp_chrp_probe(void)
-{
- if (smp_chrp_cpu_nr > 1)
- openpic_request_IPIs();
-
- return smp_chrp_cpu_nr;
-}
-
-static void __devinit
-smp_chrp_kick_cpu(int nr)
-{
- *(unsigned long *)KERNELBASE = nr;
- asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
-}
-
-static void __devinit
-smp_chrp_setup_cpu(int cpu_nr)
-{
- if (OpenPIC_Addr)
- do_openpic_setup_cpu();
-}
-
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit
-smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- call_rtas("freeze-time-base", 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- call_rtas("thaw-time-base", 0, 1, NULL);
-}
-
-void __devinit
-smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
-/* CHRP with openpic */
-struct smp_ops_t chrp_smp_ops = {
- .message_pass = smp_openpic_message_pass,
- .probe = smp_chrp_probe,
- .kick_cpu = smp_chrp_kick_cpu,
- .setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
-};
diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c
deleted file mode 100644
index 51e06ad..0000000
--- a/arch/ppc/platforms/chrp_time.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * Adapted for PowerPC (PReP) by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu).
- * Copied and modified from arch/i386/kernel/time.c
- *
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/bcd.h>
-
-#include <asm/io.h>
-#include <asm/nvram.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-
-extern spinlock_t rtc_lock;
-
-static int nvram_as1 = NVRAM_AS1;
-static int nvram_as0 = NVRAM_AS0;
-static int nvram_data = NVRAM_DATA;
-
-long __init chrp_time_init(void)
-{
- struct device_node *rtcs;
- int base;
-
- rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
- if (rtcs == NULL)
- rtcs = find_compatible_devices("rtc", "ds1385-rtc");
- if (rtcs == NULL || rtcs->addrs == NULL)
- return 0;
- base = rtcs->addrs[0].address;
- nvram_as1 = 0;
- nvram_as0 = base;
- nvram_data = base + 1;
-
- return 0;
-}
-
-int chrp_cmos_clock_read(int addr)
-{
- if (nvram_as1 != 0)
- outb(addr>>8, nvram_as1);
- outb(addr, nvram_as0);
- return (inb(nvram_data));
-}
-
-void chrp_cmos_clock_write(unsigned long val, int addr)
-{
- if (nvram_as1 != 0)
- outb(addr>>8, nvram_as1);
- outb(addr, nvram_as0);
- outb(val, nvram_data);
- return;
-}
-
-/*
- * Set the hardware clock. -- Cort
- */
-int chrp_set_rtc_time(unsigned long nowtime)
-{
- unsigned char save_control, save_freq_select;
- struct rtc_time tm;
-
- spin_lock(&rtc_lock);
- to_tm(nowtime, &tm);
-
- save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
-
- chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
-
- chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- tm.tm_year -= 1900;
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(tm.tm_sec);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_year);
- }
- chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
- chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
- chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
- chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
- chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
- chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- chrp_cmos_clock_write(save_control, RTC_CONTROL);
- chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
-
- spin_unlock(&rtc_lock);
- return 0;
-}
-
-unsigned long chrp_get_rtc_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- do {
- sec = chrp_cmos_clock_read(RTC_SECONDS);
- min = chrp_cmos_clock_read(RTC_MINUTES);
- hour = chrp_cmos_clock_read(RTC_HOURS);
- day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
- mon = chrp_cmos_clock_read(RTC_MONTH);
- year = chrp_cmos_clock_read(RTC_YEAR);
- } while (sec != chrp_cmos_clock_read(RTC_SECONDS));
-
- if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
- || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
-
- year += 1900;
- if (year < 1970)
- year += 100;
- return mktime(year, mon, day, hour, min, sec);
-}
-
-/*
- * Calibrate the decrementer frequency with the VIA timer 1.
- */
-#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
-
-/* VIA registers */
-#define RS 0x200 /* skip between registers */
-#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
-#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
-#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
-#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
-#define ACR (11*RS) /* Auxiliary control register */
-#define IFR (13*RS) /* Interrupt flag register */
-
-/* Bits in ACR */
-#define T1MODE 0xc0 /* Timer 1 mode */
-#define T1MODE_CONT 0x40 /* continuous interrupts */
-
-/* Bits in IFR and IER */
-#define T1_INT 0x40 /* Timer 1 interrupt */
-
-static int __init chrp_via_calibrate_decr(void)
-{
- struct device_node *vias;
- volatile unsigned char __iomem *via;
- int count = VIA_TIMER_FREQ_6 / 100;
- unsigned int dstart, dend;
-
- vias = find_devices("via-cuda");
- if (vias == 0)
- vias = find_devices("via");
- if (vias == 0 || vias->n_addrs == 0)
- return 0;
- via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
-
- /* set timer 1 for continuous interrupts */
- out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
- /* set the counter to a small value */
- out_8(&via[T1CH], 2);
- /* set the latch to `count' */
- out_8(&via[T1LL], count);
- out_8(&via[T1LH], count >> 8);
- /* wait until it hits 0 */
- while ((in_8(&via[IFR]) & T1_INT) == 0)
- ;
- dstart = get_dec();
- /* clear the interrupt & wait until it hits 0 again */
- in_8(&via[T1CL]);
- while ((in_8(&via[IFR]) & T1_INT) == 0)
- ;
- dend = get_dec();
-
- tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
- tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
-
- printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
- tb_ticks_per_jiffy, dstart - dend);
-
- iounmap(via);
-
- return 1;
-}
-
-void __init chrp_calibrate_decr(void)
-{
- struct device_node *cpu;
- unsigned int freq, *fp;
-
- if (chrp_via_calibrate_decr())
- return;
-
- /*
- * The cpu node should have a timebase-frequency property
- * to tell us the rate at which the decrementer counts.
- */
- freq = 16666000; /* hardcoded default */
- cpu = find_type_devices("cpu");
- if (cpu != 0) {
- fp = (unsigned int *)
- get_property(cpu, "timebase-frequency", NULL);
- if (fp != 0)
- freq = *fp;
- }
- printk("time_init: decrementer frequency = %u.%.6u MHz\n",
- freq/1000000, freq%1000000);
- tb_ticks_per_jiffy = freq / HZ;
- tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
index 5171b53..fecbe9a 100644
--- a/arch/ppc/platforms/lite5200.c
+++ b/arch/ppc/platforms/lite5200.c
@@ -34,8 +34,7 @@
#include <asm/mpc52xx.h>
#include <asm/ppc_sys.h>
#include <asm/machdep.h>
-
-#include <syslib/mpc52xx_pci.h>
+#include <asm/pci-bridge.h>
extern int powersave_nap;
@@ -68,44 +67,53 @@
}
#ifdef CONFIG_PCI
+#ifdef CONFIG_LITE5200B
+static int
+lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
+ {MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
+ };
+
+ const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+#else /* Original Lite */
static int
lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
}
#endif
+#endif
static void __init
lite5200_setup_cpu(void)
{
- struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
- struct mpc52xx_xlb __iomem *xlb;
u32 port_config;
u32 intr_ctrl;
/* Map zones */
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
- xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
- if (!cdm || !gpio || !xlb || !intr) {
- printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
- "lite5200_setup_cpu\n");
+ if (!gpio || !intr) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO/INTR during "
+ "lite5200_setup_cpu\n");
goto unmap_regs;
}
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
/* Get port mux config */
port_config = in_be32(&gpio->port_config);
@@ -116,29 +124,29 @@
port_config &= ~0x00007000; /* Differential mode - USB1 only */
port_config |= 0x00001000;
+ /* ATA CS is on csb_4/5 */
+ port_config &= ~0x03000000;
+ port_config |= 0x01000000;
+
/* Commit port config */
out_be32(&gpio->port_config, port_config);
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
- /* Enable ram snooping for 1GB window */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
- out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
- /* IRQ[0-3] setup : IRQ0 - Level Active Low */
- /* IRQ[1-3] - Level Active High */
+ /* IRQ[0-3] setup */
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= ~0x00ff0000;
- intr_ctrl |= 0x00c00000;
+#ifdef CONFIG_LITE5200B
+ /* IRQ[0-3] Level Active Low */
+ intr_ctrl |= 0x00ff0000;
+#else
+ /* IRQ0 Level Active Low
+ * IRQ[1-3] Level Active High */
+ intr_ctrl |= 0x00c00000;
+#endif
out_be32(&intr->ctrl, intr_ctrl);
/* Unmap reg zone */
unmap_regs:
- if (cdm) iounmap(cdm);
if (gpio) iounmap(gpio);
- if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
@@ -146,7 +154,8 @@
lite5200_setup_arch(void)
{
/* CPU & Port mux setup */
- lite5200_setup_cpu();
+ mpc52xx_setup_cpu(); /* Generic */
+ lite5200_setup_cpu(); /* Platform specific */
#ifdef CONFIG_PCI
/* PCI Bridge setup */
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index d95c05d..e86f615 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -1067,15 +1067,13 @@
static int __init
prep_request_io(void)
{
- if (_machine == _MACH_prep) {
#ifdef CONFIG_NVRAM
- request_region(PREP_NVRAM_AS0, 0x8, "nvram");
+ request_region(PREP_NVRAM_AS0, 0x8, "nvram");
#endif
- request_region(0x00,0x20,"dma1");
- request_region(0x40,0x20,"timer");
- request_region(0x80,0x10,"dma page reg");
- request_region(0xc0,0x20,"dma2");
- }
+ request_region(0x00,0x20,"dma1");
+ request_region(0x40,0x20,"timer");
+ request_region(0x80,0x10,"dma page reg");
+ request_region(0xc0,0x20,"dma2");
return 0;
}
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 5cb62c6..490749c 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -38,8 +38,6 @@
obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o
-obj-$(CONFIG_PPC_OF) += prom_init.o prom.o
-obj-$(CONFIG_PPC_CHRP) += open_pic.o
obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o
obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o
obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
index 9ec525f..5a5a7a9 100644
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ b/arch/ppc/syslib/mpc52xx_pci.c
@@ -225,7 +225,8 @@
/* The PCI Host bridge of MPC52xx has a prefetch memory resource
fixed to 1Gb. Doesn't fit in the resource system so we remove it */
if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
- (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) {
+ ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
+ || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
struct resource *res = &dev->resource[1];
res->start = res->end = res->flags = 0;
}
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 2ee48ce..ee6379b 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -24,6 +24,8 @@
#include <asm/pgtable.h>
#include <asm/ppcboot.h>
+#include <syslib/mpc52xx_pci.h>
+
extern bd_t __res;
static int core_mult[] = { /* CPU Frequency multiplier, taken */
@@ -216,6 +218,52 @@
tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
}
+
+void __init
+mpc52xx_setup_cpu(void)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct mpc52xx_xlb __iomem *xlb;
+
+ /* Map zones */
+ cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+ xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
+
+ if (!cdm || !xlb) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping CDM/XLB during "
+ "mpc52xx_setup_cpu\n");
+ goto unmap_regs;
+ }
+
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Configure the XLB Arbiter priorities */
+ out_be32(&xlb->master_pri_enable, 0xff);
+ out_be32(&xlb->master_priority, 0x11111111);
+
+ /* Enable ram snooping for 1GB window */
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
+ out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
+
+ /* Disable XLB pipelining */
+ /* (cfr errate 292. We could do this only just before ATA PIO
+ transaction and re-enable it after ...) */
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+
+ /* Unmap reg zone */
+unmap_regs:
+ if (cdm) iounmap(cdm);
+ if (xlb) iounmap(xlb);
+}
+
+
int mpc52xx_match_psc_function(int psc_idx, const char *func)
{
struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 38e5b93..70456c8 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -216,7 +216,7 @@
u_int openpic_read_IPI(volatile u_int __iomem * addr)
{
u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
+#if defined(OPENPIC_BIG_ENDIAN)
val = in_be32(addr);
#else
val = in_le32(addr);
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
deleted file mode 100644
index 482f837..0000000
--- a/arch/ppc/syslib/prom.c
+++ /dev/null
@@ -1,1429 +0,0 @@
-/*
- * Procedures for interfacing to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * In particular, we are interested in the device tree
- * and in using some of its services (exit, write to stdout).
- *
- * Paul Mackerras August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <stdarg.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-
-
-struct pci_address {
- unsigned a_hi;
- unsigned a_mid;
- unsigned a_lo;
-};
-
-struct pci_reg_property {
- struct pci_address addr;
- unsigned size_hi;
- unsigned size_lo;
-};
-
-struct isa_reg_property {
- unsigned space;
- unsigned address;
- unsigned size;
-};
-
-typedef unsigned long interpret_func(struct device_node *, unsigned long,
- int, int);
-static interpret_func interpret_pci_props;
-static interpret_func interpret_dbdma_props;
-static interpret_func interpret_isa_props;
-static interpret_func interpret_macio_props;
-static interpret_func interpret_root_props;
-
-extern char *klimit;
-
-/* Set for a newworld or CHRP machine */
-int use_of_interrupt_tree;
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-extern unsigned int rtas_entry; /* physical pointer */
-
-extern struct device_node *allnodes;
-
-static unsigned long finish_node(struct device_node *, unsigned long,
- interpret_func *, int, int);
-static unsigned long finish_node_interrupts(struct device_node *, unsigned long);
-static struct device_node *find_phandle(phandle);
-
-extern void enter_rtas(void *);
-void phys_call_rtas(int, int, int, ...);
-
-extern char cmd_line[512]; /* XXX */
-extern boot_infos_t *boot_infos;
-unsigned long dev_tree_size;
-
-void
-phys_call_rtas(int service, int nargs, int nret, ...)
-{
- va_list list;
- union {
- unsigned long words[16];
- double align;
- } u;
- void (*rtas)(void *, unsigned long);
- int i;
-
- u.words[0] = service;
- u.words[1] = nargs;
- u.words[2] = nret;
- va_start(list, nret);
- for (i = 0; i < nargs; ++i)
- u.words[i+3] = va_arg(list, unsigned long);
- va_end(list);
-
- rtas = (void (*)(void *, unsigned long)) rtas_entry;
- rtas(&u, rtas_data);
-}
-
-/*
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in the name, type,
- * {n_}addrs and {n_}intrs fields of each node.
- */
-void __init
-finish_device_tree(void)
-{
- unsigned long mem = (unsigned long) klimit;
- struct device_node *np;
-
- /* All CHRPs now use the interrupt tree */
- for (np = allnodes; np != NULL; np = np->allnext) {
- if (get_property(np, "interrupt-parent", NULL)) {
- use_of_interrupt_tree = 1;
- break;
- }
- }
-
- if (use_of_interrupt_tree) {
- /*
- * We want to find out here how many interrupt-controller
- * nodes there are, and if we are booted from BootX,
- * we need a pointer to the first (and hopefully only)
- * such node. But we can't use find_devices here since
- * np->name has not been set yet. -- paulus
- */
- int n = 0;
- char *name, *ic;
- int iclen;
-
- for (np = allnodes; np != NULL; np = np->allnext) {
- ic = get_property(np, "interrupt-controller", &iclen);
- name = get_property(np, "name", NULL);
- /* checking iclen makes sure we don't get a false
- match on /chosen.interrupt_controller */
- if ((name != NULL
- && strcmp(name, "interrupt-controller") == 0)
- || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) {
- if (n == 0)
- dflt_interrupt_controller = np;
- ++n;
- }
- }
- num_interrupt_controllers = n;
- }
-
- mem = finish_node(allnodes, mem, NULL, 1, 1);
- dev_tree_size = mem - (unsigned long) allnodes;
- klimit = (char *) mem;
-}
-
-static unsigned long __init
-finish_node(struct device_node *np, unsigned long mem_start,
- interpret_func *ifunc, int naddrc, int nsizec)
-{
- struct device_node *child;
- int *ip;
-
- np->name = get_property(np, "name", NULL);
- np->type = get_property(np, "device_type", NULL);
-
- if (!np->name)
- np->name = "<NULL>";
- if (!np->type)
- np->type = "<NULL>";
-
- /* get the device addresses and interrupts */
- if (ifunc != NULL)
- mem_start = ifunc(np, mem_start, naddrc, nsizec);
-
- if (use_of_interrupt_tree)
- mem_start = finish_node_interrupts(np, mem_start);
-
- /* Look for #address-cells and #size-cells properties. */
- ip = (int *) get_property(np, "#address-cells", NULL);
- if (ip != NULL)
- naddrc = *ip;
- ip = (int *) get_property(np, "#size-cells", NULL);
- if (ip != NULL)
- nsizec = *ip;
-
- if (np->parent == NULL)
- ifunc = interpret_root_props;
- else if (np->type == 0)
- ifunc = NULL;
- else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci"))
- ifunc = interpret_pci_props;
- else if (!strcmp(np->type, "dbdma"))
- ifunc = interpret_dbdma_props;
- else if (!strcmp(np->type, "mac-io")
- || ifunc == interpret_macio_props)
- ifunc = interpret_macio_props;
- else if (!strcmp(np->type, "isa"))
- ifunc = interpret_isa_props;
- else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3"))
- ifunc = interpret_root_props;
- else if (!((ifunc == interpret_dbdma_props
- || ifunc == interpret_macio_props)
- && (!strcmp(np->type, "escc")
- || !strcmp(np->type, "media-bay"))))
- ifunc = NULL;
-
- /* if we were booted from BootX, convert the full name */
- if (boot_infos
- && strncmp(np->full_name, "Devices:device-tree", 19) == 0) {
- if (np->full_name[19] == 0) {
- strcpy(np->full_name, "/");
- } else if (np->full_name[19] == ':') {
- char *p = np->full_name + 19;
- np->full_name = p;
- for (; *p; ++p)
- if (*p == ':')
- *p = '/';
- }
- }
-
- for (child = np->child; child != NULL; child = child->sibling)
- mem_start = finish_node(child, mem_start, ifunc,
- naddrc, nsizec);
-
- return mem_start;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __init
-intr_parent(struct device_node *p)
-{
- phandle *parp;
-
- parp = (phandle *) get_property(p, "interrupt-parent", NULL);
- if (parp == NULL)
- return p->parent;
- p = find_phandle(*parp);
- if (p != NULL)
- return p;
- /*
- * On a powermac booted with BootX, we don't get to know the
- * phandles for any nodes, so find_phandle will return NULL.
- * Fortunately these machines only have one interrupt controller
- * so there isn't in fact any ambiguity. -- paulus
- */
- if (num_interrupt_controllers == 1)
- p = dflt_interrupt_controller;
- return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-static int __init
-prom_n_intr_cells(struct device_node *np)
-{
- struct device_node *p;
- unsigned int *icp;
-
- for (p = np; (p = intr_parent(p)) != NULL; ) {
- icp = (unsigned int *)
- get_property(p, "#interrupt-cells", NULL);
- if (icp != NULL)
- return *icp;
- if (get_property(p, "interrupt-controller", NULL) != NULL
- || get_property(p, "interrupt-map", NULL) != NULL) {
- printk("oops, node %s doesn't have #interrupt-cells\n",
- p->full_name);
- return 1;
- }
- }
- printk("prom_n_intr_cells failed for %s\n", np->full_name);
- return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __init
-map_interrupt(unsigned int **irq, struct device_node **ictrler,
- struct device_node *np, unsigned int *ints, int nintrc)
-{
- struct device_node *p, *ipar;
- unsigned int *imap, *imask, *ip;
- int i, imaplen, match;
- int newintrc = 1, newaddrc = 1;
- unsigned int *reg;
- int naddrc;
-
- reg = (unsigned int *) get_property(np, "reg", NULL);
- naddrc = prom_n_addr_cells(np);
- p = intr_parent(np);
- while (p != NULL) {
- if (get_property(p, "interrupt-controller", NULL) != NULL)
- /* this node is an interrupt controller, stop here */
- break;
- imap = (unsigned int *)
- get_property(p, "interrupt-map", &imaplen);
- if (imap == NULL) {
- p = intr_parent(p);
- continue;
- }
- imask = (unsigned int *)
- get_property(p, "interrupt-map-mask", NULL);
- if (imask == NULL) {
- printk("oops, %s has interrupt-map but no mask\n",
- p->full_name);
- return 0;
- }
- imaplen /= sizeof(unsigned int);
- match = 0;
- ipar = NULL;
- while (imaplen > 0 && !match) {
- /* check the child-interrupt field */
- match = 1;
- for (i = 0; i < naddrc && match; ++i)
- match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
- for (; i < naddrc + nintrc && match; ++i)
- match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
- imap += naddrc + nintrc;
- imaplen -= naddrc + nintrc;
- /* grab the interrupt parent */
- ipar = find_phandle((phandle) *imap++);
- --imaplen;
- if (ipar == NULL && num_interrupt_controllers == 1)
- /* cope with BootX not giving us phandles */
- ipar = dflt_interrupt_controller;
- if (ipar == NULL) {
- printk("oops, no int parent %x in map of %s\n",
- imap[-1], p->full_name);
- return 0;
- }
- /* find the parent's # addr and intr cells */
- ip = (unsigned int *)
- get_property(ipar, "#interrupt-cells", NULL);
- if (ip == NULL) {
- printk("oops, no #interrupt-cells on %s\n",
- ipar->full_name);
- return 0;
- }
- newintrc = *ip;
- ip = (unsigned int *)
- get_property(ipar, "#address-cells", NULL);
- newaddrc = (ip == NULL)? 0: *ip;
- imap += newaddrc + newintrc;
- imaplen -= newaddrc + newintrc;
- }
- if (imaplen < 0) {
- printk("oops, error decoding int-map on %s, len=%d\n",
- p->full_name, imaplen);
- return 0;
- }
- if (!match) {
- printk("oops, no match in %s int-map for %s\n",
- p->full_name, np->full_name);
- return 0;
- }
- p = ipar;
- naddrc = newaddrc;
- nintrc = newintrc;
- ints = imap - nintrc;
- reg = ints - naddrc;
- }
- if (p == NULL)
- printk("hmmm, int tree for %s doesn't have ctrler\n",
- np->full_name);
- *irq = ints;
- *ictrler = p;
- return nintrc;
-}
-
-/*
- * New version of finish_node_interrupts.
- */
-static unsigned long __init
-finish_node_interrupts(struct device_node *np, unsigned long mem_start)
-{
- unsigned int *ints;
- int intlen, intrcells;
- int i, j, n, offset;
- unsigned int *irq;
- struct device_node *ic;
-
- ints = (unsigned int *) get_property(np, "interrupts", &intlen);
- if (ints == NULL)
- return mem_start;
- intrcells = prom_n_intr_cells(np);
- intlen /= intrcells * sizeof(unsigned int);
- np->n_intrs = intlen;
- np->intrs = (struct interrupt_info *) mem_start;
- mem_start += intlen * sizeof(struct interrupt_info);
-
- for (i = 0; i < intlen; ++i) {
- np->intrs[i].line = 0;
- np->intrs[i].sense = 1;
- n = map_interrupt(&irq, &ic, np, ints, intrcells);
- if (n <= 0)
- continue;
- offset = 0;
- /*
- * On a CHRP we have an 8259 which is subordinate to
- * the openpic in the interrupt tree, but we want the
- * openpic's interrupt numbers offsetted, not the 8259's.
- * So we apply the offset if the controller is at the
- * root of the interrupt tree, i.e. has no interrupt-parent.
- * This doesn't cope with the general case of multiple
- * cascaded interrupt controllers, but then neither will
- * irq.c at the moment either. -- paulus
- * The G5 triggers that code, I add a machine test. On
- * those machines, we want to offset interrupts from the
- * second openpic by 128 -- BenH
- */
- if (num_interrupt_controllers > 1
- && ic != NULL
- && get_property(ic, "interrupt-parent", NULL) == NULL)
- offset = 16;
-
- np->intrs[i].line = irq[0] + offset;
- if (n > 1)
- np->intrs[i].sense = irq[1];
- if (n > 2) {
- printk("hmmm, got %d intr cells for %s:", n,
- np->full_name);
- for (j = 0; j < n; ++j)
- printk(" %d", irq[j]);
- printk("\n");
- }
- ints += intrcells;
- }
-
- return mem_start;
-}
-
-/*
- * When BootX makes a copy of the device tree from the MacOS
- * Name Registry, it is in the format we use but all of the pointers
- * are offsets from the start of the tree.
- * This procedure updates the pointers.
- */
-void __init
-relocate_nodes(void)
-{
- unsigned long base;
- struct device_node *np;
- struct property *pp;
-
-#define ADDBASE(x) (x = (typeof (x))((x)? ((unsigned long)(x) + base): 0))
-
- base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset;
- allnodes = (struct device_node *)(base + 4);
- for (np = allnodes; np != 0; np = np->allnext) {
- ADDBASE(np->full_name);
- ADDBASE(np->properties);
- ADDBASE(np->parent);
- ADDBASE(np->child);
- ADDBASE(np->sibling);
- ADDBASE(np->allnext);
- for (pp = np->properties; pp != 0; pp = pp->next) {
- ADDBASE(pp->name);
- ADDBASE(pp->value);
- ADDBASE(pp->next);
- }
- }
-}
-
-int
-prom_n_addr_cells(struct device_node* np)
-{
- int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = (int *) get_property(np, "#address-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #address-cells property for the root node, default to 1 */
- return 1;
-}
-
-int
-prom_n_size_cells(struct device_node* np)
-{
- int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = (int *) get_property(np, "#size-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #size-cells property for the root node, default to 1 */
- return 1;
-}
-
-static unsigned long __init
-map_addr(struct device_node *np, unsigned long space, unsigned long addr)
-{
- int na;
- unsigned int *ranges;
- int rlen = 0;
- unsigned int type;
-
- type = (space >> 24) & 3;
- if (type == 0)
- return addr;
-
- while ((np = np->parent) != NULL) {
- if (strcmp(np->type, "pci") != 0)
- continue;
- /* PCI bridge: map the address through the ranges property */
- na = prom_n_addr_cells(np);
- ranges = (unsigned int *) get_property(np, "ranges", &rlen);
- while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) {
- if (((ranges[0] >> 24) & 3) == type
- && ranges[2] <= addr
- && addr - ranges[2] < ranges[na+4]) {
- /* ok, this matches, translate it */
- addr += ranges[na+2] - ranges[2];
- break;
- }
- ranges += na + 5;
- }
- }
- return addr;
-}
-
-static unsigned long __init
-interpret_pci_props(struct device_node *np, unsigned long mem_start,
- int naddrc, int nsizec)
-{
- struct address_range *adr;
- struct pci_reg_property *pci_addrs;
- int i, l, *ip;
-
- pci_addrs = (struct pci_reg_property *)
- get_property(np, "assigned-addresses", &l);
- if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) {
- i = 0;
- adr = (struct address_range *) mem_start;
- while ((l -= sizeof(struct pci_reg_property)) >= 0) {
- adr[i].space = pci_addrs[i].addr.a_hi;
- adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi,
- pci_addrs[i].addr.a_lo);
- adr[i].size = pci_addrs[i].size_lo;
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- mem_start += i * sizeof(struct address_range);
- }
-
- if (use_of_interrupt_tree)
- return mem_start;
-
- ip = (int *) get_property(np, "AAPL,interrupts", &l);
- if (ip == 0 && np->parent)
- ip = (int *) get_property(np->parent, "AAPL,interrupts", &l);
- if (ip == 0)
- ip = (int *) get_property(np, "interrupts", &l);
- if (ip != 0) {
- np->intrs = (struct interrupt_info *) mem_start;
- np->n_intrs = l / sizeof(int);
- mem_start += np->n_intrs * sizeof(struct interrupt_info);
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ip++;
- np->intrs[i].sense = 1;
- }
- }
-
- return mem_start;
-}
-
-static unsigned long __init
-interpret_dbdma_props(struct device_node *np, unsigned long mem_start,
- int naddrc, int nsizec)
-{
- struct reg_property *rp;
- struct address_range *adr;
- unsigned long base_address;
- int i, l, *ip;
- struct device_node *db;
-
- base_address = 0;
- for (db = np->parent; db != NULL; db = db->parent) {
- if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) {
- base_address = db->addrs[0].address;
- break;
- }
- }
-
- rp = (struct reg_property *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct reg_property)) {
- i = 0;
- adr = (struct address_range *) mem_start;
- while ((l -= sizeof(struct reg_property)) >= 0) {
- adr[i].space = 2;
- adr[i].address = rp[i].address + base_address;
- adr[i].size = rp[i].size;
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- mem_start += i * sizeof(struct address_range);
- }
-
- if (use_of_interrupt_tree)
- return mem_start;
-
- ip = (int *) get_property(np, "AAPL,interrupts", &l);
- if (ip == 0)
- ip = (int *) get_property(np, "interrupts", &l);
- if (ip != 0) {
- np->intrs = (struct interrupt_info *) mem_start;
- np->n_intrs = l / sizeof(int);
- mem_start += np->n_intrs * sizeof(struct interrupt_info);
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ip++;
- np->intrs[i].sense = 1;
- }
- }
-
- return mem_start;
-}
-
-static unsigned long __init
-interpret_macio_props(struct device_node *np, unsigned long mem_start,
- int naddrc, int nsizec)
-{
- struct reg_property *rp;
- struct address_range *adr;
- unsigned long base_address;
- int i, l, *ip;
- struct device_node *db;
-
- base_address = 0;
- for (db = np->parent; db != NULL; db = db->parent) {
- if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) {
- base_address = db->addrs[0].address;
- break;
- }
- }
-
- rp = (struct reg_property *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct reg_property)) {
- i = 0;
- adr = (struct address_range *) mem_start;
- while ((l -= sizeof(struct reg_property)) >= 0) {
- adr[i].space = 2;
- adr[i].address = rp[i].address + base_address;
- adr[i].size = rp[i].size;
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- mem_start += i * sizeof(struct address_range);
- }
-
- if (use_of_interrupt_tree)
- return mem_start;
-
- ip = (int *) get_property(np, "interrupts", &l);
- if (ip == 0)
- ip = (int *) get_property(np, "AAPL,interrupts", &l);
- if (ip != 0) {
- np->intrs = (struct interrupt_info *) mem_start;
- np->n_intrs = l / sizeof(int);
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ip++;
- np->intrs[i].sense = 1;
- }
- mem_start += np->n_intrs * sizeof(struct interrupt_info);
- }
-
- return mem_start;
-}
-
-static unsigned long __init
-interpret_isa_props(struct device_node *np, unsigned long mem_start,
- int naddrc, int nsizec)
-{
- struct isa_reg_property *rp;
- struct address_range *adr;
- int i, l, *ip;
-
- rp = (struct isa_reg_property *) get_property(np, "reg", &l);
- if (rp != 0 && l >= sizeof(struct isa_reg_property)) {
- i = 0;
- adr = (struct address_range *) mem_start;
- while ((l -= sizeof(struct reg_property)) >= 0) {
- adr[i].space = rp[i].space;
- adr[i].address = rp[i].address
- + (adr[i].space? 0: _ISA_MEM_BASE);
- adr[i].size = rp[i].size;
- ++i;
- }
- np->addrs = adr;
- np->n_addrs = i;
- mem_start += i * sizeof(struct address_range);
- }
-
- if (use_of_interrupt_tree)
- return mem_start;
-
- ip = (int *) get_property(np, "interrupts", &l);
- if (ip != 0) {
- np->intrs = (struct interrupt_info *) mem_start;
- np->n_intrs = l / (2 * sizeof(int));
- mem_start += np->n_intrs * sizeof(struct interrupt_info);
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ip++;
- np->intrs[i].sense = *ip++;
- }
- }
-
- return mem_start;
-}
-
-static unsigned long __init
-interpret_root_props(struct device_node *np, unsigned long mem_start,
- int naddrc, int nsizec)
-{
- struct address_range *adr;
- int i, l, *ip;
- unsigned int *rp;
- int rpsize = (naddrc + nsizec) * sizeof(unsigned int);
-
- rp = (unsigned int *) get_property(np, "reg", &l);
- if (rp != 0 && l >= rpsize) {
- i = 0;
- adr = (struct address_range *) mem_start;
- while ((l -= rpsize) >= 0) {
- adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2);
- adr[i].address = rp[naddrc - 1];
- adr[i].size = rp[naddrc + nsizec - 1];
- ++i;
- rp += naddrc + nsizec;
- }
- np->addrs = adr;
- np->n_addrs = i;
- mem_start += i * sizeof(struct address_range);
- }
-
- if (use_of_interrupt_tree)
- return mem_start;
-
- ip = (int *) get_property(np, "AAPL,interrupts", &l);
- if (ip == 0)
- ip = (int *) get_property(np, "interrupts", &l);
- if (ip != 0) {
- np->intrs = (struct interrupt_info *) mem_start;
- np->n_intrs = l / sizeof(int);
- mem_start += np->n_intrs * sizeof(struct interrupt_info);
- for (i = 0; i < np->n_intrs; ++i) {
- np->intrs[i].line = *ip++;
- np->intrs[i].sense = 1;
- }
- }
-
- return mem_start;
-}
-
-/*
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init
-prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
- struct device_node *np;
- int i, j;
-
- /* default to level-triggered */
- memset(senses, 1, max - off);
- if (!use_of_interrupt_tree)
- return;
-
- for (np = allnodes; np != 0; np = np->allnext) {
- for (j = 0; j < np->n_intrs; j++) {
- i = np->intrs[j].line;
- if (i >= off && i < max) {
- if (np->intrs[j].sense == 1)
- senses[i-off] = (IRQ_SENSE_LEVEL
- | IRQ_POLARITY_NEGATIVE);
- else
- senses[i-off] = (IRQ_SENSE_EDGE
- | IRQ_POLARITY_POSITIVE);
- }
- }
- }
-}
-
-/*
- * Construct and return a list of the device_nodes with a given name.
- */
-struct device_node *
-find_devices(const char *name)
-{
- struct device_node *head, **prevp, *np;
-
- prevp = &head;
- for (np = allnodes; np != 0; np = np->allnext) {
- if (np->name != 0 && strcasecmp(np->name, name) == 0) {
- *prevp = np;
- prevp = &np->next;
- }
- }
- *prevp = NULL;
- return head;
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type.
- */
-struct device_node *
-find_type_devices(const char *type)
-{
- struct device_node *head, **prevp, *np;
-
- prevp = &head;
- for (np = allnodes; np != 0; np = np->allnext) {
- if (np->type != 0 && strcasecmp(np->type, type) == 0) {
- *prevp = np;
- prevp = &np->next;
- }
- }
- *prevp = NULL;
- return head;
-}
-
-/*
- * Returns all nodes linked together
- */
-struct device_node *
-find_all_nodes(void)
-{
- struct device_node *head, **prevp, *np;
-
- prevp = &head;
- for (np = allnodes; np != 0; np = np->allnext) {
- *prevp = np;
- prevp = &np->next;
- }
- *prevp = NULL;
- return head;
-}
-
-/* Checks if the given "compat" string matches one of the strings in
- * the device's "compatible" property
- */
-int
-device_is_compatible(struct device_node *device, const char *compat)
-{
- const char* cp;
- int cplen, l;
-
- cp = (char *) get_property(device, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncasecmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
-
-/*
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int
-machine_is_compatible(const char *compat)
-{
- struct device_node *root;
-
- root = find_path_device("/");
- if (root == 0)
- return 0;
- return device_is_compatible(root, compat);
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type
- * and compatible property.
- */
-struct device_node *
-find_compatible_devices(const char *type, const char *compat)
-{
- struct device_node *head, **prevp, *np;
-
- prevp = &head;
- for (np = allnodes; np != 0; np = np->allnext) {
- if (type != NULL
- && !(np->type != 0 && strcasecmp(np->type, type) == 0))
- continue;
- if (device_is_compatible(np, compat)) {
- *prevp = np;
- prevp = &np->next;
- }
- }
- *prevp = NULL;
- return head;
-}
-
-/*
- * Find the device_node with a given full_name.
- */
-struct device_node *
-find_path_device(const char *path)
-{
- struct device_node *np;
-
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
- return np;
- return NULL;
-}
-
-/*******
- *
- * New implementation of the OF "find" APIs, return a refcounted
- * object, call of_node_put() when done. Currently, still lacks
- * locking as old implementation, this is beeing done for ppc64.
- *
- * Note that property management will need some locking as well,
- * this isn't dealt with yet
- *
- *******/
-
-/**
- * of_find_node_by_name - Find a node by it's "name" property
- * @from: The node to start searching from or NULL, the node
- * you pass will not be searched, only the next one
- * will; typically, you pass what the previous call
- * returned. of_node_put() will be called on it
- * @name: The name string to match against
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name)
-{
- struct device_node *np = from ? from->allnext : allnodes;
-
- for (; np != 0; np = np->allnext)
- if (np->name != 0 && strcasecmp(np->name, name) == 0)
- break;
- if (from)
- of_node_put(from);
- return of_node_get(np);
-}
-
-/**
- * of_find_node_by_type - Find a node by it's "device_type" property
- * @from: The node to start searching from or NULL, the node
- * you pass will not be searched, only the next one
- * will; typically, you pass what the previous call
- * returned. of_node_put() will be called on it
- * @name: The type string to match against
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type)
-{
- struct device_node *np = from ? from->allnext : allnodes;
-
- for (; np != 0; np = np->allnext)
- if (np->type != 0 && strcasecmp(np->type, type) == 0)
- break;
- if (from)
- of_node_put(from);
- return of_node_get(np);
-}
-
-/**
- * of_find_compatible_node - Find a node based on type and one of the
- * tokens in it's "compatible" property
- * @from: The node to start searching from or NULL, the node
- * you pass will not be searched, only the next one
- * will; typically, you pass what the previous call
- * returned. of_node_put() will be called on it
- * @type: The type string to match "device_type" or NULL to ignore
- * @compatible: The string to match to one of the tokens in the device
- * "compatible" list.
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compatible)
-{
- struct device_node *np = from ? from->allnext : allnodes;
-
- for (; np != 0; np = np->allnext) {
- if (type != NULL
- && !(np->type != 0 && strcasecmp(np->type, type) == 0))
- continue;
- if (device_is_compatible(np, compatible))
- break;
- }
- if (from)
- of_node_put(from);
- return of_node_get(np);
-}
-
-/**
- * of_find_node_by_path - Find a node matching a full OF path
- * @path: The full path to match
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_path(const char *path)
-{
- struct device_node *np = allnodes;
-
- for (; np != 0; np = np->allnext)
- if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
- break;
- return of_node_get(np);
-}
-
-/**
- * of_find_all_nodes - Get next node in global list
- * @prev: Previous node or NULL to start iteration
- * of_node_put() will be called on it
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
- return of_node_get(prev ? prev->allnext : allnodes);
-}
-
-/**
- * of_get_parent - Get a node's parent if any
- * @node: Node to get parent
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_get_parent(const struct device_node *node)
-{
- return node ? of_node_get(node->parent) : NULL;
-}
-
-/**
- * of_get_next_child - Iterate a node childs
- * @node: parent node
- * @prev: previous child of the parent node, or NULL to get first
- *
- * Returns a node pointer with refcount incremented, use
- * of_node_put() on it when done.
- */
-struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev)
-{
- struct device_node *next = prev ? prev->sibling : node->child;
-
- for (; next != 0; next = next->sibling)
- if (of_node_get(next))
- break;
- if (prev)
- of_node_put(prev);
- return next;
-}
-
-/**
- * of_node_get - Increment refcount of a node
- * @node: Node to inc refcount, NULL is supported to
- * simplify writing of callers
- *
- * Returns the node itself or NULL if gone. Current implementation
- * does nothing as we don't yet do dynamic node allocation on ppc32
- */
-struct device_node *of_node_get(struct device_node *node)
-{
- return node;
-}
-
-/**
- * of_node_put - Decrement refcount of a node
- * @node: Node to dec refcount, NULL is supported to
- * simplify writing of callers
- *
- * Current implementation does nothing as we don't yet do dynamic node
- * allocation on ppc32
- */
-void of_node_put(struct device_node *node)
-{
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * __init
-find_phandle(phandle ph)
-{
- struct device_node *np;
-
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->node == ph)
- return np;
- return NULL;
-}
-
-/*
- * Find a property with a given name for a given node
- * and return the value.
- */
-unsigned char *
-get_property(struct device_node *np, const char *name, int *lenp)
-{
- struct property *pp;
-
- for (pp = np->properties; pp != 0; pp = pp->next)
- if (pp->name != NULL && strcmp(pp->name, name) == 0) {
- if (lenp != 0)
- *lenp = pp->length;
- return pp->value;
- }
- return NULL;
-}
-
-/*
- * Add a property to a node
- */
-int
-prom_add_property(struct device_node* np, struct property* prop)
-{
- struct property **next = &np->properties;
-
- prop->next = NULL;
- while (*next)
- next = &(*next)->next;
- *next = prop;
-
- return 0;
-}
-
-/* I quickly hacked that one, check against spec ! */
-static inline unsigned long
-bus_space_to_resource_flags(unsigned int bus_space)
-{
- u8 space = (bus_space >> 24) & 0xf;
- if (space == 0)
- space = 0x02;
- if (space == 0x02)
- return IORESOURCE_MEM;
- else if (space == 0x01)
- return IORESOURCE_IO;
- else {
- printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
- bus_space);
- return 0;
- }
-}
-
-static struct resource*
-find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
-{
- unsigned long mask;
- int i;
-
- /* Check this one */
- mask = bus_space_to_resource_flags(range->space);
- for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
- if ((pdev->resource[i].flags & mask) == mask &&
- pdev->resource[i].start <= range->address &&
- pdev->resource[i].end > range->address) {
- if ((range->address + range->size - 1) > pdev->resource[i].end) {
- /* Add better message */
- printk(KERN_WARNING "PCI/OF resource overlap !\n");
- return NULL;
- }
- break;
- }
- }
- if (i == DEVICE_COUNT_RESOURCE)
- return NULL;
- return &pdev->resource[i];
-}
-
-/*
- * Request an OF device resource. Currently handles child of PCI devices,
- * or other nodes attached to the root node. Ultimately, put some
- * link to resources in the OF node.
- */
-struct resource*
-request_OF_resource(struct device_node* node, int index, const char* name_postfix)
-{
- struct pci_dev* pcidev;
- u8 pci_bus, pci_devfn;
- unsigned long iomask;
- struct device_node* nd;
- struct resource* parent;
- struct resource *res = NULL;
- int nlen, plen;
-
- if (index >= node->n_addrs)
- goto fail;
-
- /* Sanity check on bus space */
- iomask = bus_space_to_resource_flags(node->addrs[index].space);
- if (iomask & IORESOURCE_MEM)
- parent = &iomem_resource;
- else if (iomask & IORESOURCE_IO)
- parent = &ioport_resource;
- else
- goto fail;
-
- /* Find a PCI parent if any */
- nd = node;
- pcidev = NULL;
- while(nd) {
- if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
- pcidev = pci_find_slot(pci_bus, pci_devfn);
- if (pcidev) break;
- nd = nd->parent;
- }
- if (pcidev)
- parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
- if (!parent) {
- printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
- node->name);
- goto fail;
- }
-
- res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL);
- if (!res)
- goto fail;
- nlen = strlen(node->name);
- plen = name_postfix ? strlen(name_postfix) : 0;
- res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
- if (res->name) {
- strcpy((char *)res->name, node->name);
- if (plen)
- strcpy((char *)res->name+nlen, name_postfix);
- }
- return res;
-fail:
- return NULL;
-}
-
-int
-release_OF_resource(struct device_node* node, int index)
-{
- struct pci_dev* pcidev;
- u8 pci_bus, pci_devfn;
- unsigned long iomask, start, end;
- struct device_node* nd;
- struct resource* parent;
- struct resource *res = NULL;
-
- if (index >= node->n_addrs)
- return -EINVAL;
-
- /* Sanity check on bus space */
- iomask = bus_space_to_resource_flags(node->addrs[index].space);
- if (iomask & IORESOURCE_MEM)
- parent = &iomem_resource;
- else if (iomask & IORESOURCE_IO)
- parent = &ioport_resource;
- else
- return -EINVAL;
-
- /* Find a PCI parent if any */
- nd = node;
- pcidev = NULL;
- while(nd) {
- if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
- pcidev = pci_find_slot(pci_bus, pci_devfn);
- if (pcidev) break;
- nd = nd->parent;
- }
- if (pcidev)
- parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
- if (!parent) {
- printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
- node->name);
- return -ENODEV;
- }
-
- /* Find us in the parent and its childs */
- res = parent->child;
- start = node->addrs[index].address;
- end = start + node->addrs[index].size - 1;
- while (res) {
- if (res->start == start && res->end == end &&
- (res->flags & IORESOURCE_BUSY))
- break;
- if (res->start <= start && res->end >= end)
- res = res->child;
- else
- res = res->sibling;
- }
- if (!res)
- return -ENODEV;
-
- kfree(res->name);
- res->name = NULL;
- release_resource(res);
- kfree(res);
-
- return 0;
-}
-
-#if 0
-void
-print_properties(struct device_node *np)
-{
- struct property *pp;
- char *cp;
- int i, n;
-
- for (pp = np->properties; pp != 0; pp = pp->next) {
- printk(KERN_INFO "%s", pp->name);
- for (i = strlen(pp->name); i < 16; ++i)
- printk(" ");
- cp = (char *) pp->value;
- for (i = pp->length; i > 0; --i, ++cp)
- if ((i > 1 && (*cp < 0x20 || *cp > 0x7e))
- || (i == 1 && *cp != 0))
- break;
- if (i == 0 && pp->length > 1) {
- /* looks like a string */
- printk(" %s\n", (char *) pp->value);
- } else {
- /* dump it in hex */
- n = pp->length;
- if (n > 64)
- n = 64;
- if (pp->length % 4 == 0) {
- unsigned int *p = (unsigned int *) pp->value;
-
- n /= 4;
- for (i = 0; i < n; ++i) {
- if (i != 0 && (i % 4) == 0)
- printk("\n ");
- printk(" %08x", *p++);
- }
- } else {
- unsigned char *bp = pp->value;
-
- for (i = 0; i < n; ++i) {
- if (i != 0 && (i % 16) == 0)
- printk("\n ");
- printk(" %02x", *bp++);
- }
- }
- printk("\n");
- if (pp->length > 64)
- printk(" ... (length = %d)\n",
- pp->length);
- }
- }
-}
-#endif
-
-static DEFINE_SPINLOCK(rtas_lock);
-
-/* this can be called after setup -- Cort */
-int
-call_rtas(const char *service, int nargs, int nret,
- unsigned long *outputs, ...)
-{
- va_list list;
- int i;
- unsigned long s;
- struct device_node *rtas;
- int *tokp;
- union {
- unsigned long words[16];
- double align;
- } u;
-
- rtas = find_devices("rtas");
- if (rtas == NULL)
- return -1;
- tokp = (int *) get_property(rtas, service, NULL);
- if (tokp == NULL) {
- printk(KERN_ERR "No RTAS service called %s\n", service);
- return -1;
- }
- u.words[0] = *tokp;
- u.words[1] = nargs;
- u.words[2] = nret;
- va_start(list, outputs);
- for (i = 0; i < nargs; ++i)
- u.words[i+3] = va_arg(list, unsigned long);
- va_end(list);
-
- /*
- * RTAS doesn't use floating point.
- * Or at least, according to the CHRP spec we enter RTAS
- * with FP disabled, and it doesn't change the FP registers.
- * -- paulus.
- */
- spin_lock_irqsave(&rtas_lock, s);
- enter_rtas((void *)__pa(&u));
- spin_unlock_irqrestore(&rtas_lock, s);
-
- if (nret > 1 && outputs != NULL)
- for (i = 0; i < nret-1; ++i)
- outputs[i] = u.words[i+nargs+4];
- return u.words[nargs+3];
-}
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
deleted file mode 100644
index df14422..0000000
--- a/arch/ppc/syslib/prom_init.c
+++ /dev/null
@@ -1,1011 +0,0 @@
-/*
- * Note that prom_init() and anything called from prom_init()
- * may be running at an address that is different from the address
- * that it was linked at. References to static data items are
- * handled by compiling this file with -mrelocatable-lib.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/cacheflush.h>
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
-#include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
-
-/*
- * Properties whose value is longer than this get excluded from our
- * copy of the device tree. This way we don't waste space storing
- * things like "driver,AAPL,MacOS,PowerPC" properties. But this value
- * does need to be big enough to ensure that we don't lose things
- * like the interrupt-map property on a PCI-PCI bridge.
- */
-#define MAX_PROPERTY_LENGTH 4096
-
-#ifndef FB_MAX /* avoid pulling in all of the fb stuff */
-#define FB_MAX 8
-#endif
-
-#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long))
-
-typedef u32 prom_arg_t;
-
-struct prom_args {
- const char *service;
- int nargs;
- int nret;
- prom_arg_t args[10];
-};
-
-struct pci_address {
- unsigned a_hi;
- unsigned a_mid;
- unsigned a_lo;
-};
-
-struct pci_reg_property {
- struct pci_address addr;
- unsigned size_hi;
- unsigned size_lo;
-};
-
-struct pci_range {
- struct pci_address addr;
- unsigned phys;
- unsigned size_hi;
- unsigned size_lo;
-};
-
-struct isa_reg_property {
- unsigned space;
- unsigned address;
- unsigned size;
-};
-
-struct pci_intr_map {
- struct pci_address addr;
- unsigned dunno;
- phandle int_ctrler;
- unsigned intr;
-};
-
-static void prom_exit(void);
-static int call_prom(const char *service, int nargs, int nret, ...);
-static int call_prom_ret(const char *service, int nargs, int nret,
- prom_arg_t *rets, ...);
-static void prom_print_hex(unsigned int v);
-static int prom_set_color(ihandle ih, int i, int r, int g, int b);
-static int prom_next_node(phandle *nodep);
-static unsigned long check_display(unsigned long mem);
-static void setup_disp_fake_bi(ihandle dp);
-static unsigned long copy_device_tree(unsigned long mem_start,
- unsigned long mem_end);
-static unsigned long inspect_node(phandle node, struct device_node *dad,
- unsigned long mem_start, unsigned long mem_end,
- struct device_node ***allnextpp);
-static void prom_hold_cpus(unsigned long mem);
-static void prom_instantiate_rtas(void);
-static void * early_get_property(unsigned long base, unsigned long node,
- char *prop);
-
-prom_entry prom __initdata;
-ihandle prom_chosen __initdata;
-ihandle prom_stdout __initdata;
-
-static char *prom_display_paths[FB_MAX] __initdata;
-static phandle prom_display_nodes[FB_MAX] __initdata;
-static unsigned int prom_num_displays __initdata;
-static ihandle prom_disp_node __initdata;
-char *of_stdout_device __initdata;
-
-unsigned int rtas_data; /* physical pointer */
-unsigned int rtas_entry; /* physical pointer */
-unsigned int rtas_size;
-unsigned int old_rtas;
-
-boot_infos_t *boot_infos;
-char *bootpath;
-char *bootdevice;
-struct device_node *allnodes;
-
-extern char *klimit;
-
-static void __init
-prom_exit(void)
-{
- struct prom_args args;
-
- args.service = "exit";
- args.nargs = 0;
- args.nret = 0;
- prom(&args);
- for (;;) /* should never get here */
- ;
-}
-
-static int __init
-call_prom(const char *service, int nargs, int nret, ...)
-{
- va_list list;
- int i;
- struct prom_args prom_args;
-
- prom_args.service = service;
- prom_args.nargs = nargs;
- prom_args.nret = nret;
- va_start(list, nret);
- for (i = 0; i < nargs; ++i)
- prom_args.args[i] = va_arg(list, prom_arg_t);
- va_end(list);
- for (i = 0; i < nret; ++i)
- prom_args.args[i + nargs] = 0;
- prom(&prom_args);
- return prom_args.args[nargs];
-}
-
-static int __init
-call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...)
-{
- va_list list;
- int i;
- struct prom_args prom_args;
-
- prom_args.service = service;
- prom_args.nargs = nargs;
- prom_args.nret = nret;
- va_start(list, rets);
- for (i = 0; i < nargs; ++i)
- prom_args.args[i] = va_arg(list, int);
- va_end(list);
- for (i = 0; i < nret; ++i)
- prom_args.args[i + nargs] = 0;
- prom(&prom_args);
- for (i = 1; i < nret; ++i)
- rets[i-1] = prom_args.args[nargs + i];
- return prom_args.args[nargs];
-}
-
-void __init
-prom_print(const char *msg)
-{
- const char *p, *q;
-
- if (prom_stdout == 0)
- return;
-
- for (p = msg; *p != 0; p = q) {
- for (q = p; *q != 0 && *q != '\n'; ++q)
- ;
- if (q > p)
- call_prom("write", 3, 1, prom_stdout, p, q - p);
- if (*q != 0) {
- ++q;
- call_prom("write", 3, 1, prom_stdout, "\r\n", 2);
- }
- }
-}
-
-static void __init
-prom_print_hex(unsigned int v)
-{
- char buf[16];
- int i, c;
-
- for (i = 0; i < 8; ++i) {
- c = (v >> ((7-i)*4)) & 0xf;
- c += (c >= 10)? ('a' - 10): '0';
- buf[i] = c;
- }
- buf[i] = ' ';
- buf[i+1] = 0;
- prom_print(buf);
-}
-
-static int __init
-prom_set_color(ihandle ih, int i, int r, int g, int b)
-{
- return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r);
-}
-
-static int __init
-prom_next_node(phandle *nodep)
-{
- phandle node;
-
- if ((node = *nodep) != 0
- && (*nodep = call_prom("child", 1, 1, node)) != 0)
- return 1;
- if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
- return 1;
- for (;;) {
- if ((node = call_prom("parent", 1, 1, node)) == 0)
- return 0;
- if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
- return 1;
- }
-}
-
-#ifdef CONFIG_POWER4
-/*
- * Set up a hash table with a set of entries in it to map the
- * first 64MB of RAM. This is used on 64-bit machines since
- * some of them don't have BATs.
- */
-
-static inline void make_pte(unsigned long htab, unsigned int hsize,
- unsigned int va, unsigned int pa, int mode)
-{
- unsigned int *pteg;
- unsigned int hash, i, vsid;
-
- vsid = ((va >> 28) * 0x111) << 12;
- hash = ((va ^ vsid) >> 5) & 0x7fff80;
- pteg = (unsigned int *)(htab + (hash & (hsize - 1)));
- for (i = 0; i < 8; ++i, pteg += 4) {
- if ((pteg[1] & 1) == 0) {
- pteg[1] = vsid | ((va >> 16) & 0xf80) | 1;
- pteg[3] = pa | mode;
- break;
- }
- }
-}
-
-extern unsigned long _SDR1;
-extern PTE *Hash;
-extern unsigned long Hash_size;
-
-static void __init
-prom_alloc_htab(void)
-{
- unsigned int hsize;
- unsigned long htab;
- unsigned int addr;
-
- /*
- * Because of OF bugs we can't use the "claim" client
- * interface to allocate memory for the hash table.
- * This code is only used on 64-bit PPCs, and the only
- * 64-bit PPCs at the moment are RS/6000s, and their
- * OF is based at 0xc00000 (the 12M point), so we just
- * arbitrarily use the 0x800000 - 0xc00000 region for the
- * hash table.
- * -- paulus.
- */
- hsize = 4 << 20; /* POWER4 has no BATs */
- htab = (8 << 20);
- call_prom("claim", 3, 1, htab, hsize, 0);
- Hash = (void *)(htab + KERNELBASE);
- Hash_size = hsize;
- _SDR1 = htab + __ilog2(hsize) - 18;
-
- /*
- * Put in PTEs for the first 64MB of RAM
- */
- memset((void *)htab, 0, hsize);
- for (addr = 0; addr < 0x4000000; addr += 0x1000)
- make_pte(htab, hsize, addr + KERNELBASE, addr,
- _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX);
-#if 0 /* DEBUG stuff mapping the SCC */
- make_pte(htab, hsize, 0x80013000, 0x80013000,
- _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX);
-#endif
-}
-#endif /* CONFIG_POWER4 */
-
-
-/*
- * If we have a display that we don't know how to drive,
- * we will want to try to execute OF's open method for it
- * later. However, OF will probably fall over if we do that
- * we've taken over the MMU.
- * So we check whether we will need to open the display,
- * and if so, open it now.
- */
-static unsigned long __init
-check_display(unsigned long mem)
-{
- phandle node;
- ihandle ih;
- int i, j;
- char type[16], *path;
- static unsigned char default_colors[] = {
- 0x00, 0x00, 0x00,
- 0x00, 0x00, 0xaa,
- 0x00, 0xaa, 0x00,
- 0x00, 0xaa, 0xaa,
- 0xaa, 0x00, 0x00,
- 0xaa, 0x00, 0xaa,
- 0xaa, 0xaa, 0x00,
- 0xaa, 0xaa, 0xaa,
- 0x55, 0x55, 0x55,
- 0x55, 0x55, 0xff,
- 0x55, 0xff, 0x55,
- 0x55, 0xff, 0xff,
- 0xff, 0x55, 0x55,
- 0xff, 0x55, 0xff,
- 0xff, 0xff, 0x55,
- 0xff, 0xff, 0xff
- };
- const unsigned char *clut;
-
- prom_disp_node = 0;
-
- for (node = 0; prom_next_node(&node); ) {
- type[0] = 0;
- call_prom("getprop", 4, 1, node, "device_type",
- type, sizeof(type));
- if (strcmp(type, "display") != 0)
- continue;
- /* It seems OF doesn't null-terminate the path :-( */
- path = (char *) mem;
- memset(path, 0, 256);
- if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
- continue;
-
- /*
- * If this display is the device that OF is using for stdout,
- * move it to the front of the list.
- */
- mem += strlen(path) + 1;
- i = prom_num_displays++;
- if (of_stdout_device != 0 && i > 0
- && strcmp(of_stdout_device, path) == 0) {
- for (; i > 0; --i) {
- prom_display_paths[i]
- = prom_display_paths[i-1];
- prom_display_nodes[i]
- = prom_display_nodes[i-1];
- }
- }
- prom_display_paths[i] = path;
- prom_display_nodes[i] = node;
- if (i == 0)
- prom_disp_node = node;
- if (prom_num_displays >= FB_MAX)
- break;
- }
-
- for (j=0; j<prom_num_displays; j++) {
- path = prom_display_paths[j];
- node = prom_display_nodes[j];
- prom_print("opening display ");
- prom_print(path);
- ih = call_prom("open", 1, 1, path);
- if (ih == 0 || ih == (ihandle) -1) {
- prom_print("... failed\n");
- for (i=j+1; i<prom_num_displays; i++) {
- prom_display_paths[i-1] = prom_display_paths[i];
- prom_display_nodes[i-1] = prom_display_nodes[i];
- }
- if (--prom_num_displays > 0) {
- prom_disp_node = prom_display_nodes[j];
- j--;
- } else
- prom_disp_node = 0;
- continue;
- } else {
- prom_print("... ok\n");
- call_prom("setprop", 4, 1, node, "linux,opened", 0, 0);
-
- /*
- * Setup a usable color table when the appropriate
- * method is available.
- * Should update this to use set-colors.
- */
- clut = default_colors;
- for (i = 0; i < 32; i++, clut += 3)
- if (prom_set_color(ih, i, clut[0], clut[1],
- clut[2]) != 0)
- break;
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
- clut = PTRRELOC(logo_linux_clut224.clut);
- for (i = 0; i < logo_linux_clut224.clutsize;
- i++, clut += 3)
- if (prom_set_color(ih, i + 32, clut[0],
- clut[1], clut[2]) != 0)
- break;
-#endif /* CONFIG_LOGO_LINUX_CLUT224 */
- }
- }
-
- if (prom_stdout) {
- phandle p;
- p = call_prom("instance-to-package", 1, 1, prom_stdout);
- if (p && p != -1) {
- type[0] = 0;
- call_prom("getprop", 4, 1, p, "device_type",
- type, sizeof(type));
- if (strcmp(type, "display") == 0)
- call_prom("setprop", 4, 1, p, "linux,boot-display",
- 0, 0);
- }
- }
-
- return ALIGNUL(mem);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-static void __init
-setup_disp_fake_bi(ihandle dp)
-{
-#ifdef CONFIG_BOOTX_TEXT
- int width = 640, height = 480, depth = 8, pitch;
- unsigned address;
- struct pci_reg_property addrs[8];
- int i, naddrs;
- char name[32];
- char *getprop = "getprop";
-
- prom_print("Initializing fake screen: ");
-
- memset(name, 0, sizeof(name));
- call_prom(getprop, 4, 1, dp, "name", name, sizeof(name));
- name[sizeof(name)-1] = 0;
- prom_print(name);
- prom_print("\n");
- call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width));
- call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height));
- call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth));
- pitch = width * ((depth + 7) / 8);
- call_prom(getprop, 4, 1, dp, "linebytes",
- &pitch, sizeof(pitch));
- if (pitch == 1)
- pitch = 0x1000; /* for strange IBM display */
- address = 0;
- call_prom(getprop, 4, 1, dp, "address",
- &address, sizeof(address));
- if (address == 0) {
- /* look for an assigned address with a size of >= 1MB */
- naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses",
- addrs, sizeof(addrs));
- naddrs /= sizeof(struct pci_reg_property);
- for (i = 0; i < naddrs; ++i) {
- if (addrs[i].size_lo >= (1 << 20)) {
- address = addrs[i].addr.a_lo;
- /* use the BE aperture if possible */
- if (addrs[i].size_lo >= (16 << 20))
- address += (8 << 20);
- break;
- }
- }
- if (address == 0) {
- prom_print("Failed to get address\n");
- return;
- }
- }
- /* kludge for valkyrie */
- if (strcmp(name, "valkyrie") == 0)
- address += 0x1000;
-
-#ifdef CONFIG_POWER4
-#if CONFIG_TASK_SIZE > 0x80000000
-#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5
-#endif
- {
- extern boot_infos_t disp_bi;
- unsigned long va, pa, i, offset;
- va = 0x90000000;
- pa = address & 0xfffff000ul;
- offset = address & 0x00000fff;
-
- for (i=0; i<0x4000; i++) {
- make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa,
- _PAGE_ACCESSED | _PAGE_NO_CACHE |
- _PAGE_GUARDED | PP_RWXX);
- va += 0x1000;
- pa += 0x1000;
- }
- btext_setup_display(width, height, depth, pitch, 0x90000000 | offset);
- disp_bi.dispDeviceBase = (u8 *)address;
- }
-#else /* CONFIG_POWER4 */
- btext_setup_display(width, height, depth, pitch, address);
- btext_prepare_BAT();
-#endif /* CONFIG_POWER4 */
-#endif /* CONFIG_BOOTX_TEXT */
-}
-
-/*
- * Make a copy of the device tree from the PROM.
- */
-static unsigned long __init
-copy_device_tree(unsigned long mem_start, unsigned long mem_end)
-{
- phandle root;
- unsigned long new_start;
- struct device_node **allnextp;
-
- root = call_prom("peer", 1, 1, (phandle)0);
- if (root == (phandle)0) {
- prom_print("couldn't get device tree root\n");
- prom_exit();
- }
- allnextp = &allnodes;
- mem_start = ALIGNUL(mem_start);
- new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp);
- *allnextp = NULL;
- return new_start;
-}
-
-static unsigned long __init
-inspect_node(phandle node, struct device_node *dad,
- unsigned long mem_start, unsigned long mem_end,
- struct device_node ***allnextpp)
-{
- int l;
- phandle child;
- struct device_node *np;
- struct property *pp, **prev_propp;
- char *prev_name, *namep;
- unsigned char *valp;
-
- np = (struct device_node *) mem_start;
- mem_start += sizeof(struct device_node);
- memset(np, 0, sizeof(*np));
- np->node = node;
- **allnextpp = PTRUNRELOC(np);
- *allnextpp = &np->allnext;
- if (dad != 0) {
- np->parent = PTRUNRELOC(dad);
- /* we temporarily use the `next' field as `last_child'. */
- if (dad->next == 0)
- dad->child = PTRUNRELOC(np);
- else
- dad->next->sibling = PTRUNRELOC(np);
- dad->next = np;
- }
-
- /* get and store all properties */
- prev_propp = &np->properties;
- prev_name = "";
- for (;;) {
- pp = (struct property *) mem_start;
- namep = (char *) (pp + 1);
- pp->name = PTRUNRELOC(namep);
- if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0)
- break;
- mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
- prev_name = namep;
- valp = (unsigned char *) mem_start;
- pp->value = PTRUNRELOC(valp);
- pp->length = call_prom("getprop", 4, 1, node, namep,
- valp, mem_end - mem_start);
- if (pp->length < 0)
- continue;
-#ifdef MAX_PROPERTY_LENGTH
- if (pp->length > MAX_PROPERTY_LENGTH)
- continue; /* ignore this property */
-#endif
- mem_start = ALIGNUL(mem_start + pp->length);
- *prev_propp = PTRUNRELOC(pp);
- prev_propp = &pp->next;
- }
- if (np->node != 0) {
- /* Add a "linux,phandle" property" */
- pp = (struct property *) mem_start;
- *prev_propp = PTRUNRELOC(pp);
- prev_propp = &pp->next;
- namep = (char *) (pp + 1);
- pp->name = PTRUNRELOC(namep);
- strcpy(namep, "linux,phandle");
- mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
- pp->value = (unsigned char *) PTRUNRELOC(&np->node);
- pp->length = sizeof(np->node);
- }
- *prev_propp = NULL;
-
- /* get the node's full name */
- l = call_prom("package-to-path", 3, 1, node,
- mem_start, mem_end - mem_start);
- if (l >= 0) {
- char *p, *ep;
-
- np->full_name = PTRUNRELOC((char *) mem_start);
- *(char *)(mem_start + l) = 0;
- /* Fixup an Apple bug where they have bogus \0 chars in the
- * middle of the path in some properties
- */
- for (p = (char *)mem_start, ep = p + l; p < ep; p++)
- if ((*p) == '\0') {
- memmove(p, p+1, ep - p);
- ep--;
- }
- mem_start = ALIGNUL(mem_start + l + 1);
- }
-
- /* do all our children */
- child = call_prom("child", 1, 1, node);
- while (child != 0) {
- mem_start = inspect_node(child, np, mem_start, mem_end,
- allnextpp);
- child = call_prom("peer", 1, 1, child);
- }
-
- return mem_start;
-}
-
-unsigned long smp_chrp_cpu_nr __initdata = 0;
-
-/*
- * With CHRP SMP we need to use the OF to start the other
- * processors so we can't wait until smp_boot_cpus (the OF is
- * trashed by then) so we have to put the processors into
- * a holding pattern controlled by the kernel (not OF) before
- * we destroy the OF.
- *
- * This uses a chunk of high memory, puts some holding pattern
- * code there and sends the other processors off to there until
- * smp_boot_cpus tells them to do something. We do that by using
- * physical address 0x0. The holding pattern checks that address
- * until its cpu # is there, when it is that cpu jumps to
- * __secondary_start(). smp_boot_cpus() takes care of setting those
- * values.
- *
- * We also use physical address 0x4 here to tell when a cpu
- * is in its holding pattern code.
- *
- * -- Cort
- *
- * Note that we have to do this if we have more than one CPU,
- * even if this is a UP kernel. Otherwise when we trash OF
- * the other CPUs will start executing some random instructions
- * and crash the system. -- paulus
- */
-static void __init
-prom_hold_cpus(unsigned long mem)
-{
- extern void __secondary_hold(void);
- unsigned long i;
- int cpu;
- phandle node;
- char type[16], *path;
- unsigned int reg;
-
- /*
- * XXX: hack to make sure we're chrp, assume that if we're
- * chrp we have a device_type property -- Cort
- */
- node = call_prom("finddevice", 1, 1, "/");
- if (call_prom("getprop", 4, 1, node,
- "device_type", type, sizeof(type)) <= 0)
- return;
-
- /* copy the holding pattern code to someplace safe (0) */
- /* the holding pattern is now within the first 0x100
- bytes of the kernel image -- paulus */
- memcpy((void *)0, _stext, 0x100);
- flush_icache_range(0, 0x100);
-
- /* look for cpus */
- *(unsigned long *)(0x0) = 0;
- asm volatile("dcbf 0,%0": : "r" (0) : "memory");
- for (node = 0; prom_next_node(&node); ) {
- type[0] = 0;
- call_prom("getprop", 4, 1, node, "device_type",
- type, sizeof(type));
- if (strcmp(type, "cpu") != 0)
- continue;
- path = (char *) mem;
- memset(path, 0, 256);
- if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
- continue;
- reg = -1;
- call_prom("getprop", 4, 1, node, "reg", ®, sizeof(reg));
- cpu = smp_chrp_cpu_nr++;
-#ifdef CONFIG_SMP
- smp_hw_index[cpu] = reg;
-#endif /* CONFIG_SMP */
- /* XXX: hack - don't start cpu 0, this cpu -- Cort */
- if (cpu == 0)
- continue;
- prom_print("starting cpu ");
- prom_print(path);
- *(ulong *)(0x4) = 0;
- call_prom("start-cpu", 3, 0, node,
- (char *)__secondary_hold - _stext, cpu);
- prom_print("...");
- for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ )
- ;
- if (*(ulong *)(0x4) == cpu)
- prom_print("ok\n");
- else {
- prom_print("failed: ");
- prom_print_hex(*(ulong *)0x4);
- prom_print("\n");
- }
- }
-}
-
-static void __init
-prom_instantiate_rtas(void)
-{
- ihandle prom_rtas;
- prom_arg_t result;
-
- prom_rtas = call_prom("finddevice", 1, 1, "/rtas");
- if (prom_rtas == -1)
- return;
-
- rtas_size = 0;
- call_prom("getprop", 4, 1, prom_rtas,
- "rtas-size", &rtas_size, sizeof(rtas_size));
- prom_print("instantiating rtas");
- if (rtas_size == 0) {
- rtas_data = 0;
- } else {
- /*
- * Ask OF for some space for RTAS.
- * Actually OF has bugs so we just arbitrarily
- * use memory at the 6MB point.
- */
- rtas_data = 6 << 20;
- prom_print(" at ");
- prom_print_hex(rtas_data);
- }
-
- prom_rtas = call_prom("open", 1, 1, "/rtas");
- prom_print("...");
- rtas_entry = 0;
- if (call_prom_ret("call-method", 3, 2, &result,
- "instantiate-rtas", prom_rtas, rtas_data) == 0)
- rtas_entry = result;
- if ((rtas_entry == -1) || (rtas_entry == 0))
- prom_print(" failed\n");
- else
- prom_print(" done\n");
-}
-
-/*
- * We enter here early on, when the Open Firmware prom is still
- * handling exceptions and the MMU hash table for us.
- */
-unsigned long __init
-prom_init(int r3, int r4, prom_entry pp)
-{
- unsigned long mem;
- ihandle prom_mmu;
- unsigned long offset = reloc_offset();
- int i, l;
- char *p, *d;
- unsigned long phys;
- prom_arg_t result[3];
- char model[32];
- phandle node;
- int rc;
-
- /* Default */
- phys = (unsigned long) &_stext;
-
- /* First get a handle for the stdout device */
- prom = pp;
- prom_chosen = call_prom("finddevice", 1, 1, "/chosen");
- if (prom_chosen == -1)
- prom_exit();
- if (call_prom("getprop", 4, 1, prom_chosen, "stdout",
- &prom_stdout, sizeof(prom_stdout)) <= 0)
- prom_exit();
-
- /* Get the full OF pathname of the stdout device */
- mem = (unsigned long) klimit + offset;
- p = (char *) mem;
- memset(p, 0, 256);
- call_prom("instance-to-path", 3, 1, prom_stdout, p, 255);
- of_stdout_device = p;
- mem += strlen(p) + 1;
-
- /* Get the boot device and translate it to a full OF pathname. */
- p = (char *) mem;
- l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20);
- if (l > 0) {
- p[l] = 0; /* should already be null-terminated */
- bootpath = PTRUNRELOC(p);
- mem += l + 1;
- d = (char *) mem;
- *d = 0;
- call_prom("canon", 3, 1, p, d, 1<<20);
- bootdevice = PTRUNRELOC(d);
- mem = ALIGNUL(mem + strlen(d) + 1);
- }
-
- prom_instantiate_rtas();
-
-#ifdef CONFIG_POWER4
- /*
- * Find out how much memory we have and allocate a
- * suitably-sized hash table.
- */
- prom_alloc_htab();
-#endif
- mem = check_display(mem);
-
- prom_print("copying OF device tree...");
- mem = copy_device_tree(mem, mem + (1<<20));
- prom_print("done\n");
-
- prom_hold_cpus(mem);
-
- klimit = (char *) (mem - offset);
-
- node = call_prom("finddevice", 1, 1, "/");
- rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model));
- if (rc > 0 && !strncmp (model, "Pegasos", 7)
- && strncmp (model, "Pegasos2", 8)) {
- /* Pegasos 1 has a broken translate method in the OF,
- * and furthermore the BATs are mapped 1:1 so the phys
- * address calculated above is correct, so let's use
- * it directly.
- */
- } else if (offset == 0) {
- /* If we are already running at 0xc0000000, we assume we were
- * loaded by an OF bootloader which did set a BAT for us.
- * This breaks OF translate so we force phys to be 0.
- */
- prom_print("(already at 0xc0000000) phys=0\n");
- phys = 0;
- } else if (call_prom("getprop", 4, 1, prom_chosen, "mmu",
- &prom_mmu, sizeof(prom_mmu)) <= 0) {
- prom_print(" no MMU found\n");
- } else if (call_prom_ret("call-method", 4, 4, result, "translate",
- prom_mmu, &_stext, 1) != 0) {
- prom_print(" (translate failed)\n");
- } else {
- /* We assume the phys. address size is 3 cells */
- phys = result[2];
- }
-
- if (prom_disp_node != 0)
- setup_disp_fake_bi(prom_disp_node);
-
- /* Use quiesce call to get OF to shut down any devices it's using */
- prom_print("Calling quiesce ...\n");
- call_prom("quiesce", 0, 0);
-
- /* Relocate various pointers which will be used once the
- kernel is running at the address it was linked at. */
- for (i = 0; i < prom_num_displays; ++i)
- prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]);
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
- /* Relocate the of stdout for console autodetection */
- of_stdout_device = PTRUNRELOC(of_stdout_device);
-#endif
-
- prom_print("returning 0x");
- prom_print_hex(phys);
- prom_print("from prom_init\n");
- prom_stdout = 0;
-
- return phys;
-}
-
-/*
- * early_get_property is used to access the device tree image prepared
- * by BootX very early on, before the pointers in it have been relocated.
- */
-static void * __init
-early_get_property(unsigned long base, unsigned long node, char *prop)
-{
- struct device_node *np = (struct device_node *)(base + node);
- struct property *pp;
-
- for (pp = np->properties; pp != 0; pp = pp->next) {
- pp = (struct property *) (base + (unsigned long)pp);
- if (strcmp((char *)((unsigned long)pp->name + base),
- prop) == 0) {
- return (void *)((unsigned long)pp->value + base);
- }
- }
- return NULL;
-}
-
-/* Is boot-info compatible ? */
-#define BOOT_INFO_IS_COMPATIBLE(bi) ((bi)->compatible_version <= BOOT_INFO_VERSION)
-#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2)
-#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4)
-
-void __init
-bootx_init(unsigned long r4, unsigned long phys)
-{
- boot_infos_t *bi = (boot_infos_t *) r4;
- unsigned long space;
- unsigned long ptr, x;
- char *model;
-
- boot_infos = PTRUNRELOC(bi);
- if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
- bi->logicalDisplayBase = NULL;
-
-#ifdef CONFIG_BOOTX_TEXT
- btext_init(bi);
-
- /*
- * Test if boot-info is compatible. Done only in config
- * CONFIG_BOOTX_TEXT since there is nothing much we can do
- * with an incompatible version, except display a message
- * and eventually hang the processor...
- *
- * I'll try to keep enough of boot-info compatible in the
- * future to always allow display of this message;
- */
- if (!BOOT_INFO_IS_COMPATIBLE(bi)) {
- btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n");
- btext_flushscreen();
- }
-#endif /* CONFIG_BOOTX_TEXT */
-
- /* New BootX enters kernel with MMU off, i/os are not allowed
- here. This hack will have been done by the boostrap anyway.
- */
- if (bi->version < 4) {
- /*
- * XXX If this is an iMac, turn off the USB controller.
- */
- model = (char *) early_get_property
- (r4 + bi->deviceTreeOffset, 4, "model");
- if (model
- && (strcmp(model, "iMac,1") == 0
- || strcmp(model, "PowerMac1,1") == 0)) {
- out_le32((unsigned *)0x80880008, 1); /* XXX */
- }
- }
-
- /* Move klimit to enclose device tree, args, ramdisk, etc... */
- if (bi->version < 5) {
- space = bi->deviceTreeOffset + bi->deviceTreeSize;
- if (bi->ramDisk)
- space = bi->ramDisk + bi->ramDiskSize;
- } else
- space = bi->totalParamsSize;
- klimit = PTRUNRELOC((char *) bi + space);
-
- /* New BootX will have flushed all TLBs and enters kernel with
- MMU switched OFF, so this should not be useful anymore.
- */
- if (bi->version < 4) {
- /*
- * Touch each page to make sure the PTEs for them
- * are in the hash table - the aim is to try to avoid
- * getting DSI exceptions while copying the kernel image.
- */
- for (ptr = ((unsigned long) &_stext) & PAGE_MASK;
- ptr < (unsigned long)bi + space; ptr += PAGE_SIZE)
- x = *(volatile unsigned long *)ptr;
- }
-
-#ifdef CONFIG_BOOTX_TEXT
- /*
- * Note that after we call btext_prepare_BAT, we can't do
- * prom_draw*, flushscreen or clearscreen until we turn the MMU
- * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase
- * to a virtual address.
- */
- btext_prepare_BAT();
-#endif
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
index ff86b2d..cfc2d6a 100644
--- a/arch/ppc/xmon/start.c
+++ b/arch/ppc/xmon/start.c
@@ -58,7 +58,7 @@
void
xmon_map_scc(void)
{
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
volatile unsigned char *base;
#elif defined(CONFIG_GEMINI)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2b8841f..343120c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -801,7 +801,7 @@
*/
print_cpu_info(&S390_lowcore.cpu_data);
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
lowcore_ptr[i] = (struct _lowcore *)
__get_free_pages(GFP_KERNEL|GFP_DMA,
sizeof(void*) == 8 ? 1 : 0);
@@ -831,7 +831,7 @@
#endif
set_prefix((u32)(unsigned long) lowcore_ptr[smp_processor_id()]);
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
if (cpu != smp_processor_id())
smp_create_idle(cpu);
}
@@ -868,7 +868,7 @@
int cpu;
int ret;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index cf94e8e..868e68b 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -30,7 +30,7 @@
static int __init x##_setup(char *opts) \
{ \
x##_disabled = 1; \
- return 0; \
+ return 1; \
} \
__setup("no" __stringify(x), x##_setup);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 7ee4ca2..bb229ef 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -401,7 +401,7 @@
{
int cpu_id;
- for_each_cpu(cpu_id)
+ for_each_possible_cpu(cpu_id)
register_cpu(&cpu[cpu_id], cpu_id, NULL);
return 0;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 5982fe2..05fbb20 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -22,6 +22,9 @@
config PCI
bool
+config PCMCIA
+ bool
+
config GENERIC_CALIBRATE_DELAY
bool
default y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 8d14c7a..24790be 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -20,7 +20,7 @@
# Have to precede the include because the included Makefiles reference them.
SYMLINK_HEADERS := archparam.h system.h sigcontext.h processor.h ptrace.h \
- module.h vm-flags.h elf.h ldt.h
+ module.h vm-flags.h elf.h host_ldt.h
SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
# XXX: The "os" symlink is only used by arch/um/include/os.h, which includes
@@ -129,7 +129,7 @@
-DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
-DELF_FORMAT="$(ELF_FORMAT)" $(CPP_MODE-y) \
-DKERNEL_STACK_SIZE=$(STACK_SIZE) \
- -DUNMAP_PATH=arch/um/sys-$(SUBARCH)/unmap_fin.o
+ -DUNMAP_PATH=arch/um/sys-$(SUBARCH)/unmap.o
#The wrappers will select whether using "malloc" or the kernel allocator.
LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
@@ -150,8 +150,7 @@
$(ARCH_DIR)/include/user_constants.h \
$(ARCH_DIR)/include/kern_constants.h $(ARCH_DIR)/Kconfig.arch
-MRPROPER_FILES += $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) \
- $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os
+MRPROPER_FILES += $(ARCH_SYMLINKS)
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 38df311..dfd88b6 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -1,7 +1,7 @@
# Copyright 2003 - 2004 Pathscale, Inc
# Released under the GPL
-libs-y += arch/um/sys-x86_64/
+core-y += arch/um/sys-x86_64/
START := 0x60000000
#We #undef __x86_64__ for kernelspace, not for userspace where
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
index a61b7b4..53d09ed 100644
--- a/arch/um/drivers/daemon_kern.c
+++ b/arch/um/drivers/daemon_kern.c
@@ -95,18 +95,7 @@
static int register_daemon(void)
{
register_transport(&daemon_transport);
- return(1);
+ return 0;
}
__initcall(register_daemon);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index 49acb2b..d18a974 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -104,7 +104,7 @@
extern int ping_watchdog(int fd);
-static ssize_t harddog_write(struct file *file, const char *data, size_t len,
+static ssize_t harddog_write(struct file *file, const char __user *data, size_t len,
loff_t *ppos)
{
/*
@@ -118,6 +118,7 @@
static int harddog_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ void __user *argp= (void __user *)arg;
static struct watchdog_info ident = {
WDIOC_SETTIMEOUT,
0,
@@ -127,13 +128,12 @@
default:
return -ENOTTY;
case WDIOC_GETSUPPORT:
- if(copy_to_user((struct harddog_info *)arg, &ident,
- sizeof(ident)))
+ if(copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0,(int *)arg);
+ return put_user(0,(int __user *)argp);
case WDIOC_KEEPALIVE:
return(ping_watchdog(harddog_out_fd));
}
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index 59602b8..37232f9 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -67,8 +67,8 @@
/* /dev/dsp file operations */
-static ssize_t hostaudio_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos)
+static ssize_t hostaudio_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
void *kbuf;
@@ -94,7 +94,7 @@
return(err);
}
-static ssize_t hostaudio_write(struct file *file, const char *buffer,
+static ssize_t hostaudio_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
@@ -152,7 +152,7 @@
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
- if(get_user(data, (int *) arg))
+ if(get_user(data, (int __user *) arg))
return(-EFAULT);
break;
default:
@@ -168,7 +168,7 @@
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
- if(put_user(data, (int *) arg))
+ if(put_user(data, (int __user *) arg))
return(-EFAULT);
break;
default:
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index c9b078f..3a7af18 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -124,18 +124,7 @@
static int register_mcast(void)
{
register_transport(&mcast_transport);
- return(1);
+ return 0;
}
__initcall(register_mcast);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 1488816..28e3760 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -20,6 +20,8 @@
#include "linux/namei.h"
#include "linux/proc_fs.h"
#include "linux/syscalls.h"
+#include "linux/list.h"
+#include "linux/mm.h"
#include "linux/console.h"
#include "asm/irq.h"
#include "asm/uaccess.h"
@@ -347,6 +349,142 @@
return(NULL);
}
+#define UNPLUGGED_PER_PAGE \
+ ((PAGE_SIZE - sizeof(struct list_head)) / sizeof(unsigned long))
+
+struct unplugged_pages {
+ struct list_head list;
+ void *pages[UNPLUGGED_PER_PAGE];
+};
+
+static unsigned long long unplugged_pages_count = 0;
+static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages);
+static int unplug_index = UNPLUGGED_PER_PAGE;
+
+static int mem_config(char *str)
+{
+ unsigned long long diff;
+ int err = -EINVAL, i, add;
+ char *ret;
+
+ if(str[0] != '=')
+ goto out;
+
+ str++;
+ if(str[0] == '-')
+ add = 0;
+ else if(str[0] == '+'){
+ add = 1;
+ }
+ else goto out;
+
+ str++;
+ diff = memparse(str, &ret);
+ if(*ret != '\0')
+ goto out;
+
+ diff /= PAGE_SIZE;
+
+ for(i = 0; i < diff; i++){
+ struct unplugged_pages *unplugged;
+ void *addr;
+
+ if(add){
+ if(list_empty(&unplugged_pages))
+ break;
+
+ unplugged = list_entry(unplugged_pages.next,
+ struct unplugged_pages, list);
+ if(unplug_index > 0)
+ addr = unplugged->pages[--unplug_index];
+ else {
+ list_del(&unplugged->list);
+ addr = unplugged;
+ unplug_index = UNPLUGGED_PER_PAGE;
+ }
+
+ free_page((unsigned long) addr);
+ unplugged_pages_count--;
+ }
+ else {
+ struct page *page;
+
+ page = alloc_page(GFP_ATOMIC);
+ if(page == NULL)
+ break;
+
+ unplugged = page_address(page);
+ if(unplug_index == UNPLUGGED_PER_PAGE){
+ INIT_LIST_HEAD(&unplugged->list);
+ list_add(&unplugged->list, &unplugged_pages);
+ unplug_index = 0;
+ }
+ else {
+ struct list_head *entry = unplugged_pages.next;
+ addr = unplugged;
+
+ unplugged = list_entry(entry,
+ struct unplugged_pages,
+ list);
+ unplugged->pages[unplug_index++] = addr;
+ err = os_drop_memory(addr, PAGE_SIZE);
+ if(err)
+ printk("Failed to release memory - "
+ "errno = %d\n", err);
+ }
+
+ unplugged_pages_count++;
+ }
+ }
+
+ err = 0;
+out:
+ return err;
+}
+
+static int mem_get_config(char *name, char *str, int size, char **error_out)
+{
+ char buf[sizeof("18446744073709551615")];
+ int len = 0;
+
+ sprintf(buf, "%ld", uml_physmem);
+ CONFIG_CHUNK(str, size, len, buf, 1);
+
+ return len;
+}
+
+static int mem_id(char **str, int *start_out, int *end_out)
+{
+ *start_out = 0;
+ *end_out = 0;
+
+ return 0;
+}
+
+static int mem_remove(int n)
+{
+ return -EBUSY;
+}
+
+static struct mc_device mem_mc = {
+ .name = "mem",
+ .config = mem_config,
+ .get_config = mem_get_config,
+ .id = mem_id,
+ .remove = mem_remove,
+};
+
+static int mem_mc_init(void)
+{
+ if(can_drop_memory())
+ mconsole_register_dev(&mem_mc);
+ else printk("Can't release memory to the host - memory hotplug won't "
+ "be supported\n");
+ return 0;
+}
+
+__initcall(mem_mc_init);
+
#define CONFIG_BUF_SIZE 64
static void mconsole_get_config(int (*get_config)(char *, char *, int,
@@ -478,7 +616,7 @@
return;
while(1){
- n = min(len, ARRAY_SIZE(console_buf) - console_index);
+ n = min((size_t)len, ARRAY_SIZE(console_buf) - console_index);
strncpy(&console_buf[console_index], string, n);
console_index += n;
string += n;
diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c
index 07c80f2..466ff2c 100644
--- a/arch/um/drivers/pcap_kern.c
+++ b/arch/um/drivers/pcap_kern.c
@@ -106,18 +106,7 @@
static int register_pcap(void)
{
register_transport(&pcap_transport);
- return(1);
+ return 0;
}
__initcall(register_pcap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index a62f5ef..163ee0d 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -93,18 +93,7 @@
static int register_slip(void)
{
register_transport(&slip_transport);
- return(1);
+ return 0;
}
__initcall(register_slip);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index 33d7982..95e50c9 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -77,7 +77,7 @@
int i=0;
*init = ((struct slirp_init)
- { argw : { { "slirp", NULL } } });
+ { .argw = { { "slirp", NULL } } });
str = split_if_spec(str, mac_out, NULL);
@@ -116,18 +116,7 @@
static int register_slirp(void)
{
register_transport(&slirp_transport);
- return(1);
+ return 0;
}
__initcall(register_slirp);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 0336575..0897852 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -891,7 +891,7 @@
SA_INTERRUPT, "ubd", ubd_dev);
if(err != 0)
printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
- return(err);
+ return 0;
}
device_initcall(ubd_driver_init);
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index 07176d9..4255713 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -116,7 +116,11 @@
extern struct task_struct *get_task(int pid, int require);
extern void machine_halt(void);
extern int is_syscall(unsigned long addr);
-extern void arch_switch(void);
+
+extern void arch_switch_to_tt(struct task_struct *from, struct task_struct *to);
+
+extern void arch_switch_to_skas(struct task_struct *from, struct task_struct *to);
+
extern void free_irq(unsigned int, void *);
extern int cpu(void);
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 6f4d680..6ac0f82 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,23 +58,17 @@
};
#define LINE_INIT(str, d) \
- { init_str : str, \
- init_pri : INIT_STATIC, \
- valid : 1, \
- throttled : 0, \
- lock : SPIN_LOCK_UNLOCKED, \
- buffer : NULL, \
- head : NULL, \
- tail : NULL, \
- sigio : 0, \
- driver : d, \
- have_irq : 0 }
+ { .init_str = str, \
+ .init_pri = INIT_STATIC, \
+ .valid = 1, \
+ .lock = SPIN_LOCK_UNLOCKED, \
+ .driver = d }
struct lines {
int num;
};
-#define LINES_INIT(n) { num : n }
+#define LINES_INIT(n) { .num = n }
extern void line_close(struct tty_struct *tty, struct file * filp);
extern int line_open(struct line *lines, struct tty_struct *tty);
diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h
index a1064c5..a54514d 100644
--- a/arch/um/include/mem_user.h
+++ b/arch/um/include/mem_user.h
@@ -49,7 +49,6 @@
extern unsigned long host_task_size;
extern unsigned long task_size;
-extern void check_devanon(void);
extern int init_mem_user(void);
extern void setup_memory(void *entry);
extern unsigned long find_iomem(char *driver, unsigned long *len_out);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index d3d1bc6..f88856c 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -13,6 +13,7 @@
#include "kern_util.h"
#include "skas/mm_id.h"
#include "irq_user.h"
+#include "sysdep/tls.h"
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
@@ -172,6 +173,7 @@
extern void os_early_checks(void);
extern int can_do_skas(void);
extern void os_check_bugs(void);
+extern void check_host_supports_tls(int *supports_tls, int *tls_min);
/* Make sure they are clear when running in TT mode. Required by
* SEGV_MAYBE_FIXABLE */
@@ -205,6 +207,8 @@
extern int os_protect_memory(void *addr, unsigned long len,
int r, int w, int x);
extern int os_unmap_memory(void *addr, int len);
+extern int os_drop_memory(void *addr, int length);
+extern int can_drop_memory(void);
extern void os_flush_stdout(void);
/* tt.c
@@ -234,8 +238,12 @@
int stack_order);
extern int helper_wait(int pid);
-/* umid.c */
+/* tls.c */
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+/* umid.c */
extern int umid_file_name(char *name, char *buf, int len);
extern int set_umid(char *name);
extern char *get_umid(void);
diff --git a/arch/um/include/sysdep-i386/checksum.h b/arch/um/include/sysdep-i386/checksum.h
index 7d3d202..052bb06 100644
--- a/arch/um/include/sysdep-i386/checksum.h
+++ b/arch/um/include/sysdep-i386/checksum.h
@@ -48,7 +48,8 @@
*/
static __inline__
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
+unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+ unsigned char *dst,
int len, int sum, int *err_ptr)
{
if(copy_from_user(dst, src, len)){
@@ -192,7 +193,7 @@
*/
#define HAVE_CSUM_COPY_USER
static __inline__ unsigned int csum_and_copy_to_user(const unsigned char *src,
- unsigned char *dst,
+ unsigned char __user *dst,
int len, int sum, int *err_ptr)
{
if (access_ok(VERIFY_WRITE, dst, len)){
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index c8ee955..6670cc9 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -14,7 +14,12 @@
#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#ifdef UML_CONFIG_PT_PROXY
extern void update_debugregs(int seq);
+#else
+static inline void update_debugregs(int seq) {}
+#endif
+
/* syscall emulation path in ptrace */
diff --git a/arch/um/include/sysdep-i386/tls.h b/arch/um/include/sysdep-i386/tls.h
new file mode 100644
index 0000000..918fd3c
--- /dev/null
+++ b/arch/um/include/sysdep-i386/tls.h
@@ -0,0 +1,32 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+# include <asm/ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+
+#define GDT_ENTRY_TLS_MIN_I386 6
+#define GDT_ENTRY_TLS_MIN_X86_64 12
+
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/sysdep-x86_64/tls.h b/arch/um/include/sysdep-x86_64/tls.h
new file mode 100644
index 0000000..35f19f2
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/tls.h
@@ -0,0 +1,29 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+ unsigned int lm:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+# include <asm/ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h
index 992a7e1..fe0c29b 100644
--- a/arch/um/include/user_util.h
+++ b/arch/um/include/user_util.h
@@ -8,6 +8,9 @@
#include "sysdep/ptrace.h"
+/* Copied from kernel.h */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
extern int mode_tt;
@@ -31,7 +34,7 @@
extern unsigned long uml_reserved;
extern unsigned long end_vm;
extern unsigned long start_vm;
-extern unsigned long highmem;
+extern unsigned long long highmem;
extern char host_info[];
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 1ca8431..c0cb627 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -22,6 +22,7 @@
void flush_thread(void)
{
+ arch_flush_thread(¤t->thread.arch);
CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
}
@@ -58,14 +59,14 @@
return(err);
}
-long sys_execve(char *file, char __user *__user *argv,
+long sys_execve(char __user *file, char __user *__user *argv,
char __user *__user *env)
{
long error;
char *filename;
lock_kernel();
- filename = getname((char __user *) file);
+ filename = getname(file);
error = PTR_ERR(filename);
if (IS_ERR(filename)) goto out;
error = execve1(filename, argv, env);
@@ -74,14 +75,3 @@
unlock_kernel();
return(error);
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 92cce96..44e41a3 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -30,7 +30,7 @@
unsigned long *empty_zero_page = NULL;
unsigned long *empty_bad_page = NULL;
pgd_t swapper_pg_dir[PTRS_PER_PGD];
-unsigned long highmem;
+unsigned long long highmem;
int kmalloc_ok = 0;
static unsigned long brk_end;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index 3113cab..f6a5a50 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -156,9 +156,25 @@
unsigned long stack_top, struct task_struct * p,
struct pt_regs *regs)
{
+ int ret;
+
p->thread = (struct thread_struct) INIT_THREAD;
- return(CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr,
- clone_flags, sp, stack_top, p, regs));
+ ret = CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr,
+ clone_flags, sp, stack_top, p, regs);
+
+ if (ret || !current->thread.forking)
+ goto out;
+
+ clear_flushed_tls(p);
+
+ /*
+ * Set a new TLS for the child thread?
+ */
+ if (clone_flags & CLONE_SETTLS)
+ ret = arch_copy_tls(p);
+
+out:
+ return ret;
}
void initial_thread_cb(void (*proc)(void *), void *arg)
@@ -185,10 +201,6 @@
{
CHOOSE_MODE(uml_idle_timer(), (void) 0);
- atomic_inc(&init_mm.mm_count);
- current->mm = &init_mm;
- current->active_mm = &init_mm;
-
while(1){
/* endless idle loop with no priority at all */
@@ -407,7 +419,7 @@
return strlen(buf);
}
-static int proc_write_sysemu(struct file *file,const char *buf, unsigned long count,void *data)
+static int proc_write_sysemu(struct file *file,const char __user *buf, unsigned long count,void *data)
{
char tmp[2];
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 98e0939..60d2eda 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -46,6 +46,7 @@
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int i, ret;
+ unsigned long __user *p = (void __user *)(unsigned long)data;
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
@@ -58,7 +59,7 @@
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp, (unsigned long __user *) data);
+ ret = put_user(tmp, p);
break;
}
@@ -136,15 +137,13 @@
#ifdef PTRACE_GETREGS
case PTRACE_GETREGS: { /* Get all gp regs from the child. */
- if (!access_ok(VERIFY_WRITE, (unsigned long *)data,
- MAX_REG_OFFSET)) {
+ if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) {
ret = -EIO;
break;
}
for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) {
- __put_user(getreg(child, i),
- (unsigned long __user *) data);
- data += sizeof(long);
+ __put_user(getreg(child, i), p);
+ p++;
}
ret = 0;
break;
@@ -153,15 +152,14 @@
#ifdef PTRACE_SETREGS
case PTRACE_SETREGS: { /* Set all gp regs in the child. */
unsigned long tmp = 0;
- if (!access_ok(VERIFY_READ, (unsigned *)data,
- MAX_REG_OFFSET)) {
+ if (!access_ok(VERIFY_READ, p, MAX_REG_OFFSET)) {
ret = -EIO;
break;
}
for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) {
- __get_user(tmp, (unsigned long __user *) data);
+ __get_user(tmp, p);
putreg(child, i, tmp);
- data += sizeof(long);
+ p++;
}
ret = 0;
break;
@@ -187,14 +185,23 @@
ret = set_fpxregs(data, child);
break;
#endif
+ case PTRACE_GET_THREAD_AREA:
+ ret = ptrace_get_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
+ case PTRACE_SET_THREAD_AREA:
+ ret = ptrace_set_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
case PTRACE_FAULTINFO: {
- /* Take the info from thread->arch->faultinfo,
- * but transfer max. sizeof(struct ptrace_faultinfo).
- * On i386, ptrace_faultinfo is smaller!
- */
- ret = copy_to_user((unsigned long __user *) data,
- &child->thread.arch.faultinfo,
- sizeof(struct ptrace_faultinfo));
+ /* Take the info from thread->arch->faultinfo,
+ * but transfer max. sizeof(struct ptrace_faultinfo).
+ * On i386, ptrace_faultinfo is smaller!
+ */
+ ret = copy_to_user(p, &child->thread.arch.faultinfo,
+ sizeof(struct ptrace_faultinfo));
if(ret)
break;
break;
@@ -204,8 +211,7 @@
case PTRACE_LDT: {
struct ptrace_ldt ldt;
- if(copy_from_user(&ldt, (unsigned long __user *) data,
- sizeof(ldt))){
+ if(copy_from_user(&ldt, p, sizeof(ldt))){
ret = -EIO;
break;
}
diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c
index 3f70a2e..2135eaf 100644
--- a/arch/um/kernel/skas/process_kern.c
+++ b/arch/um/kernel/skas/process_kern.c
@@ -35,6 +35,8 @@
switch_threads(&from->thread.mode.skas.switch_buf,
to->thread.mode.skas.switch_buf);
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
if(current->pid == 0)
switch_timers(1);
}
@@ -89,10 +91,17 @@
panic("blech");
schedule_tail(current->thread.prev_sched);
+
+ /* XXX: if interrupt_end() calls schedule, this call to
+ * arch_switch_to_skas isn't needed. We could want to apply this to
+ * improve performance. -bb */
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
current->thread.prev_sched = NULL;
/* Handle any immediate reschedules or signals */
interrupt_end();
+
userspace(¤t->thread.regs.regs);
}
@@ -109,6 +118,8 @@
if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp;
handler = fork_handler;
+
+ arch_copy_thread(¤t->thread.arch, &p->thread.arch);
}
else {
init_thread_registers(&p->thread.regs.regs);
diff --git a/arch/um/kernel/syscall_kern.c b/arch/um/kernel/syscall_kern.c
index 8e1a350..37d3978 100644
--- a/arch/um/kernel/syscall_kern.c
+++ b/arch/um/kernel/syscall_kern.c
@@ -104,7 +104,7 @@
}
-long sys_uname(struct old_utsname * name)
+long sys_uname(struct old_utsname __user * name)
{
long err;
if (!name)
@@ -115,7 +115,7 @@
return err?-EFAULT:0;
}
-long sys_olduname(struct oldold_utsname * name)
+long sys_olduname(struct oldold_utsname __user * name)
{
long error;
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index d56046c..02f6d4d 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -198,7 +198,7 @@
si.si_signo = SIGBUS;
si.si_errno = 0;
si.si_code = BUS_ADRERR;
- si.si_addr = (void *)address;
+ si.si_addr = (void __user *)address;
current->thread.arch.faultinfo = fi;
force_sig_info(SIGBUS, &si, current);
} else if (err == -ENOMEM) {
@@ -207,7 +207,7 @@
} else {
BUG_ON(err != -EFAULT);
si.si_signo = SIGSEGV;
- si.si_addr = (void *) address;
+ si.si_addr = (void __user *) address;
current->thread.arch.faultinfo = fi;
force_sig_info(SIGSEGV, &si, current);
}
@@ -220,8 +220,8 @@
si.si_signo = SIGSEGV;
si.si_code = SEGV_ACCERR;
- si.si_addr = (void *) FAULT_ADDRESS(fi);
- current->thread.arch.faultinfo = fi;
+ si.si_addr = (void __user *) FAULT_ADDRESS(fi);
+ current->thread.arch.faultinfo = fi;
force_sig_info(SIGSEGV, &si, current);
}
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index 295c1ac..a9c1443 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -51,6 +51,13 @@
c = 0;
+ /* Notice that here we "up" the semaphore on which "to" is waiting, and
+ * below (the read) we wait on this semaphore (which is implemented by
+ * switch_pipe) and go sleeping. Thus, after that, we have resumed in
+ * "to", and can't use any more the value of "from" (which is outdated),
+ * nor the value in "to" (since it was the task which stole us the CPU,
+ * which we don't care about). */
+
err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c));
if(err != sizeof(c))
panic("write of switch_pipe failed, err = %d", -err);
@@ -77,7 +84,7 @@
change_sig(SIGALRM, alrm);
change_sig(SIGPROF, prof);
- arch_switch();
+ arch_switch_to_tt(prev_sched, current);
flush_tlb_all();
local_irq_restore(flags);
@@ -141,7 +148,6 @@
set_cmdline("(kernel thread)");
change_sig(SIGUSR1, 1);
- change_sig(SIGVTALRM, 1);
change_sig(SIGPROF, 1);
local_irq_enable();
if(!run_kernel_thread(fn, arg, ¤t->thread.exec_buf))
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index 1659386..f4bfc4c 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -4,7 +4,7 @@
#
obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \
- signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \
+ signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o tls.o \
user_syms.o util.o drivers/ sys-$(SUBARCH)/
obj-$(CONFIG_MODE_SKAS) += skas/
@@ -12,12 +12,9 @@
user-objs-$(CONFIG_TTY_LOG) += tty_log.o
USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \
- process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o \
+ process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o tls.o \
uaccess.o umid.o util.o
-elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
-CFLAGS_elf_aux.o += -I$(objtree)/arch/um
-
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
HAVE_AIO_ABI := $(shell [ -r /usr/include/linux/aio_abi.h ] && \
diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c
index 6ae4b19..768606b 100644
--- a/arch/um/os-Linux/drivers/ethertap_kern.c
+++ b/arch/um/os-Linux/drivers/ethertap_kern.c
@@ -102,18 +102,7 @@
static int register_ethertap(void)
{
register_transport(ðertap_transport);
- return(1);
+ return 0;
}
__initcall(register_ethertap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c
index 4202b9e..190009a 100644
--- a/arch/um/os-Linux/drivers/tuntap_kern.c
+++ b/arch/um/os-Linux/drivers/tuntap_kern.c
@@ -87,18 +87,7 @@
static int register_tuntap(void)
{
register_transport(&tuntap_transport);
- return(1);
+ return 0;
}
__initcall(register_tuntap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 9d7d69a..6ab372d 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -121,36 +121,11 @@
return(fd);
}
-static int create_anon_file(unsigned long long len)
-{
- void *addr;
- int fd;
-
- fd = open("/dev/anon", O_RDWR);
- if(fd < 0) {
- perror("opening /dev/anon");
- exit(1);
- }
-
- addr = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
- if(addr == MAP_FAILED){
- perror("mapping physmem file");
- exit(1);
- }
- munmap(addr, len);
-
- return(fd);
-}
-
-extern int have_devanon;
-
int create_mem_file(unsigned long long len)
{
int err, fd;
- if(have_devanon)
- fd = create_anon_file(len);
- else fd = create_tmp_file(len);
+ fd = create_tmp_file(len);
err = os_set_exec_close(fd, 1);
if(err < 0){
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index d261888..8176b0b 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -11,6 +11,7 @@
#include <linux/unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
+#include <sys/mman.h>
#include "ptrace_user.h"
#include "os.h"
#include "user.h"
@@ -20,6 +21,7 @@
#include "kern_util.h"
#include "longjmp.h"
#include "skas_ptrace.h"
+#include "kern_constants.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -187,6 +189,48 @@
return(0);
}
+#ifndef MADV_REMOVE
+#define MADV_REMOVE 0x5 /* remove these pages & resources */
+#endif
+
+int os_drop_memory(void *addr, int length)
+{
+ int err;
+
+ err = madvise(addr, length, MADV_REMOVE);
+ if(err < 0)
+ err = -errno;
+ return err;
+}
+
+int can_drop_memory(void)
+{
+ void *addr;
+ int fd;
+
+ printk("Checking host MADV_REMOVE support...");
+ fd = create_mem_file(UM_KERN_PAGE_SIZE);
+ if(fd < 0){
+ printk("Creating test memory file failed, err = %d\n", -fd);
+ return 0;
+ }
+
+ addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE, fd, 0);
+ if(addr == MAP_FAILED){
+ printk("Mapping test memory file failed, err = %d\n", -errno);
+ return 0;
+ }
+
+ if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){
+ printk("MADV_REMOVE failed, err = %d\n", -errno);
+ return 0;
+ }
+
+ printk("OK\n");
+ return 1;
+}
+
void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int))
{
int flags = 0, pages;
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 3275313..387e26a 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -470,25 +470,6 @@
}
#endif
-int have_devanon = 0;
-
-/* Runs on boot kernel stack - already safe to use printk. */
-
-void check_devanon(void)
-{
- int fd;
-
- printk("Checking for /dev/anon on the host...");
- fd = open("/dev/anon", O_RDWR);
- if(fd < 0){
- printk("Not available (open failed with errno %d)\n", errno);
- return;
- }
-
- printk("OK\n");
- have_devanon = 1;
-}
-
int __init parse_iomem(char *str, int *add)
{
struct iomem_region *new;
@@ -664,6 +645,5 @@
{
check_ptrace();
check_sigio();
- check_devanon();
}
diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/um/os-Linux/sys-i386/Makefile
index 340ef26..b321361 100644
--- a/arch/um/os-Linux/sys-i386/Makefile
+++ b/arch/um/os-Linux/sys-i386/Makefile
@@ -3,7 +3,7 @@
# Licensed under the GPL
#
-obj-$(CONFIG_MODE_SKAS) = registers.o
+obj-$(CONFIG_MODE_SKAS) = registers.o tls.o
USER_OBJS := $(obj-y)
diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c
new file mode 100644
index 0000000..ba21f0e
--- /dev/null
+++ b/arch/um/os-Linux/sys-i386/tls.c
@@ -0,0 +1,33 @@
+#include <linux/unistd.h>
+#include "sysdep/tls.h"
+#include "user_util.h"
+
+static _syscall1(int, get_thread_area, user_desc_t *, u_info);
+
+/* Checks whether host supports TLS, and sets *tls_min according to the value
+ * valid on the host.
+ * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
+void check_host_supports_tls(int *supports_tls, int *tls_min) {
+ /* Values for x86 and x86_64.*/
+ int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(val); i++) {
+ user_desc_t info;
+ info.entry_number = val[i];
+
+ if (get_thread_area(&info) == 0) {
+ *tls_min = val[i];
+ *supports_tls = 1;
+ return;
+ } else {
+ if (errno == EINVAL)
+ continue;
+ else if (errno == ENOSYS)
+ *supports_tls = 0;
+ return;
+ }
+ }
+
+ *supports_tls = 0;
+}
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
new file mode 100644
index 0000000..9cb09a4
--- /dev/null
+++ b/arch/um/os-Linux/tls.c
@@ -0,0 +1,76 @@
+#include <errno.h>
+#include <sys/ptrace.h>
+#include <asm/ldt.h>
+#include "sysdep/tls.h"
+#include "uml-config.h"
+
+/* TLS support - we basically rely on the host's one.*/
+
+/* In TT mode, this should be called only by the tracing thread, and makes sense
+ * only for PTRACE_SET_THREAD_AREA. In SKAS mode, it's used normally.
+ *
+ */
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
+
+#ifndef PTRACE_SET_THREAD_AREA
+#define PTRACE_SET_THREAD_AREA 26
+#endif
+
+int os_set_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+#ifdef UML_CONFIG_MODE_SKAS
+
+int os_get_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+#endif
+
+#ifdef UML_CONFIG_MODE_TT
+#include "linux/unistd.h"
+
+static _syscall1(int, get_thread_area, user_desc_t *, u_info);
+static _syscall1(int, set_thread_area, user_desc_t *, u_info);
+
+int do_set_thread_area_tt(user_desc_t *info)
+{
+ int ret;
+
+ ret = set_thread_area(info);
+ if (ret < 0) {
+ ret = -errno;
+ }
+ return ret;
+}
+
+int do_get_thread_area_tt(user_desc_t *info)
+{
+ int ret;
+
+ ret = get_thread_area(info);
+ if (ret < 0) {
+ ret = -errno;
+ }
+ return ret;
+}
+
+#endif /* UML_CONFIG_MODE_TT */
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 2e41cab..b696b45 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -20,25 +20,7 @@
$(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
endef
-
-# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If
-# so, it's considered to be a path relative to $(srcdir) rather than
-# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from
-# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So,
-# it sets $(ldt.c-dir) to /arch/um/sys-i386.
-quiet_cmd_make_link = SYMLINK $@
-cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@
-
-# this needs to be before the foreach, because targets does not accept
-# complete paths like $(obj)/$(f). To make sure this works, use a := assignment
-# or we will get $(obj)/$(f) in the "targets" value.
-# Also, this forces you to use the := syntax when assigning to targets.
-# Otherwise the line below will cause an infinite loop (if you don't know why,
-# just do it).
-
-targets := $(targets) $(SYMLINKS)
-
-SYMLINKS := $(foreach f,$(SYMLINKS),$(obj)/$(f))
-
-$(SYMLINKS): FORCE
- $(call if_changed,make_link)
+ifdef subarch-obj-y
+obj-y += subarch.o
+subarch-y = $(addprefix ../../$(SUBARCH)/,$(subarch-obj-y))
+endif
diff --git a/arch/um/scripts/Makefile.unmap b/arch/um/scripts/Makefile.unmap
deleted file mode 100644
index b216518..0000000
--- a/arch/um/scripts/Makefile.unmap
+++ /dev/null
@@ -1,22 +0,0 @@
-clean-files += unmap_tmp.o unmap_fin.o unmap.o
-
-ifdef CONFIG_MODE_TT
-
-#Always build unmap_fin.o
-extra-y += unmap_fin.o
-#Do dependency tracking for unmap.o (it will be always built, but won't get the tracking unless we use this).
-targets += unmap.o
-
-#XXX: partially copied from arch/um/scripts/Makefile.rules
-$(obj)/unmap.o: _c_flags = $(call unprofile,$(CFLAGS))
-
-quiet_cmd_wrapld = LD $@
-define cmd_wrapld
- $(LD) $(LDFLAGS) -r -o $(obj)/unmap_tmp.o $< ; \
- $(OBJCOPY) $(UML_OBJCOPYFLAGS) $(obj)/unmap_tmp.o $@ -G switcheroo
-endef
-
-$(obj)/unmap_fin.o : $(obj)/unmap.o FORCE
- $(call if_changed,wrapld)
-
-endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index f5fd5b0..98b20b7 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -1,23 +1,18 @@
-obj-y := bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o semaphore.o signal.o sigcontext.o syscalls.o sysrq.o \
- sys_call_table.o
+obj-y = bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
+ ptrace_user.o signal.o sigcontext.o syscalls.o sysrq.o \
+ sys_call_table.o tls.o
obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
-obj-$(CONFIG_MODULES) += module.o
+subarch-obj-y = lib/bitops.o kernel/semaphore.o
+subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
-SYMLINKS = bitops.c semaphore.c highmem.c module.c
-
include arch/um/scripts/Makefile.rules
-bitops.c-dir = lib
-semaphore.c-dir = kernel
-highmem.c-dir = mm
-module.c-dir = kernel
+extra-$(CONFIG_MODE_TT) += unmap.o
-$(obj)/stub_segv.o : _c_flags = $(call unprofile,$(CFLAGS))
-
-include arch/um/scripts/Makefile.unmap
+$(obj)/stub_segv.o $(obj)/unmap.o: \
+ _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 8032a10..6028bc7 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -15,9 +15,22 @@
#include "sysdep/sigcontext.h"
#include "sysdep/sc.h"
-void arch_switch(void)
+void arch_switch_to_tt(struct task_struct *from, struct task_struct *to)
{
- update_debugregs(current->thread.arch.debugregs_seq);
+ update_debugregs(to->thread.arch.debugregs_seq);
+ arch_switch_tls_tt(from, to);
+}
+
+void arch_switch_to_skas(struct task_struct *from, struct task_struct *to)
+{
+ int err = arch_switch_tls_skas(from, to);
+ if (!err)
+ return;
+
+ if (err != -EINVAL)
+ printk(KERN_WARNING "arch_switch_tls_skas failed, errno %d, not EINVAL\n", -err);
+ else
+ printk(KERN_WARNING "arch_switch_tls_skas failed, errno = EINVAL\n");
}
int is_syscall(unsigned long addr)
@@ -124,22 +137,22 @@
int peek_user(struct task_struct *child, long addr, long data)
{
/* read the word at location addr in the USER area. */
- unsigned long tmp;
+ unsigned long tmp;
- if ((addr & 3) || addr < 0)
- return -EIO;
+ if ((addr & 3) || addr < 0)
+ return -EIO;
- tmp = 0; /* Default return condition */
- if(addr < MAX_REG_OFFSET){
- tmp = getreg(child, addr);
- }
- else if((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))){
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- tmp = child->thread.arch.debugregs[addr];
- }
- return put_user(tmp, (unsigned long *) data);
+ tmp = 0; /* Default return condition */
+ if(addr < MAX_REG_OFFSET){
+ tmp = getreg(child, addr);
+ }
+ else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))){
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ tmp = child->thread.arch.debugregs[addr];
+ }
+ return put_user(tmp, (unsigned long __user *) data);
}
struct i387_fxsave_struct {
diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/um/sys-i386/ptrace_user.c
index 7c376c9..9f3bd8e 100644
--- a/arch/um/sys-i386/ptrace_user.c
+++ b/arch/um/sys-i386/ptrace_user.c
@@ -14,6 +14,7 @@
#include "sysdep/thread.h"
#include "user.h"
#include "os.h"
+#include "uml-config.h"
int ptrace_getregs(long pid, unsigned long *regs_out)
{
@@ -43,6 +44,7 @@
return 0;
}
+/* All the below stuff is of interest for TT mode only */
static void write_debugregs(int pid, unsigned long *regs)
{
struct user *dummy;
@@ -75,7 +77,6 @@
/* Accessed only by the tracing thread */
static unsigned long kernel_debugregs[8] = { [ 0 ... 7 ] = 0 };
-static int debugregs_seq = 0;
void arch_enter_kernel(void *task, int pid)
{
@@ -89,6 +90,11 @@
write_debugregs(pid, TASK_DEBUGREGS(task));
}
+#ifdef UML_CONFIG_PT_PROXY
+/* Accessed only by the tracing thread */
+static int debugregs_seq;
+
+/* Only called by the ptrace proxy */
void ptrace_pokeuser(unsigned long addr, unsigned long data)
{
if((addr < offsetof(struct user, u_debugreg[0])) ||
@@ -109,6 +115,7 @@
write_debugregs(pid, kernel_debugregs);
}
+/* Optimized out in its header when not defined */
void update_debugregs(int seq)
{
int me;
@@ -118,6 +125,7 @@
me = os_getpid();
initial_thread_cb(update_debugregs_cb, &me);
}
+#endif
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
index 33a40f5..f5d0e1c 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/um/sys-i386/signal.c
@@ -19,7 +19,7 @@
#include "skas.h"
static int copy_sc_from_user_skas(struct pt_regs *regs,
- struct sigcontext *from)
+ struct sigcontext __user *from)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
@@ -57,7 +57,7 @@
return(0);
}
-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
+int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate __user *to_fp,
struct pt_regs *regs, unsigned long sp)
{
struct sigcontext sc;
@@ -92,7 +92,7 @@
"errno = %d\n", err);
return(1);
}
- to_fp = (to_fp ? to_fp : (struct _fpstate *) (to + 1));
+ to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
sc.fpstate = to_fp;
if(err)
@@ -113,10 +113,11 @@
* saved pointer is in the kernel, but the sigcontext is in userspace, so we
* copy_to_user it.
*/
-int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
+int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
int fpsize)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate *to_fp;
+ struct _fpstate __user *from_fp;
unsigned long sigs;
int err;
@@ -131,13 +132,14 @@
return(err);
}
-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
+int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate __user *fp,
struct sigcontext *from, int fpsize, unsigned long sp)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate __user *to_fp;
+ struct _fpstate *from_fp;
int err;
- to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
+ to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
from_fp = from->fpstate;
err = copy_to_user(to, from, sizeof(*to));
@@ -165,7 +167,7 @@
return(ret);
}
-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
+static int copy_sc_to_user(struct sigcontext *to, struct _fpstate __user *fp,
struct pt_regs *from, unsigned long sp)
{
return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
@@ -173,7 +175,7 @@
copy_sc_to_user_skas(to, fp, from, sp)));
}
-static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp,
+static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
sigset_t *set, unsigned long sp)
{
int err = 0;
@@ -188,7 +190,7 @@
struct sigframe
{
- char *pretcode;
+ char __user *pretcode;
int sig;
struct sigcontext sc;
struct _fpstate fpstate;
@@ -198,10 +200,10 @@
struct rt_sigframe
{
- char *pretcode;
+ char __user *pretcode;
int sig;
- struct siginfo *pinfo;
- void *puc;
+ struct siginfo __user *pinfo;
+ void __user *puc;
struct siginfo info;
struct ucontext uc;
struct _fpstate fpstate;
@@ -213,16 +215,16 @@
sigset_t *mask)
{
struct sigframe __user *frame;
- void *restorer;
+ void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
- frame = (struct sigframe *) stack_top - 1;
+ frame = (struct sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
- restorer = (void *) frame->retcode;
+ restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
@@ -278,16 +280,16 @@
siginfo_t *info, sigset_t *mask)
{
struct rt_sigframe __user *frame;
- void *restorer;
+ void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
- frame = (struct rt_sigframe *) stack_top - 1;
+ frame = (struct rt_sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
- restorer = (void *) frame->retcode;
+ restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
@@ -333,7 +335,7 @@
long sys_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct sigframe __user *frame = (struct sigframe *)(sp - 8);
+ struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
sigset_t set;
struct sigcontext __user *sc = &frame->sc;
unsigned long __user *oldmask = &sc->oldmask;
@@ -365,8 +367,8 @@
long sys_rt_sigreturn(struct pt_regs regs)
{
- unsigned long __user sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame = (struct rt_sigframe *) (sp - 4);
+ unsigned long sp = PT_REGS_SP(¤t->thread.regs);
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (sp - 4);
sigset_t set;
struct ucontext __user *uc = &frame->uc;
int sig_size = _NSIG_WORDS * sizeof(unsigned long);
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index ad75c27..1ff6147 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -6,8 +6,6 @@
#define sys_vm86old sys_ni_syscall
#define sys_vm86 sys_ni_syscall
-#define sys_set_thread_area sys_ni_syscall
-#define sys_get_thread_area sys_ni_syscall
#define sys_stime um_stime
#define sys_time um_time
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 83e9be8..749dd1b 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -61,21 +61,27 @@
return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
}
-/* The i386 version skips reading from %esi, the fourth argument. So we must do
- * this, too.
+/*
+ * The prototype on i386 is:
+ *
+ * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
+ *
+ * and the "newtls" arg. on i386 is read by copy_thread directly from the
+ * register saved on the stack.
*/
long sys_clone(unsigned long clone_flags, unsigned long newsp,
- int __user *parent_tid, int unused, int __user *child_tid)
+ int __user *parent_tid, void *newtls, int __user *child_tid)
{
long ret;
if (!newsp)
newsp = UPT_SP(¤t->thread.regs.regs);
+
current->thread.forking = 1;
ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid,
child_tid);
current->thread.forking = 0;
- return(ret);
+ return ret;
}
/*
@@ -104,7 +110,7 @@
union semun fourth;
if (!ptr)
return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
diff --git a/arch/um/sys-i386/tls.c b/arch/um/sys-i386/tls.c
new file mode 100644
index 0000000..a3188e8
--- /dev/null
+++ b/arch/um/sys-i386/tls.c
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2005 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
+ * Licensed under the GPL
+ */
+
+#include "linux/config.h"
+#include "linux/kernel.h"
+#include "linux/sched.h"
+#include "linux/slab.h"
+#include "linux/types.h"
+#include "asm/uaccess.h"
+#include "asm/ptrace.h"
+#include "asm/segment.h"
+#include "asm/smp.h"
+#include "asm/desc.h"
+#include "choose-mode.h"
+#include "kern.h"
+#include "kern_util.h"
+#include "mode_kern.h"
+#include "os.h"
+#include "mode.h"
+
+#ifdef CONFIG_MODE_SKAS
+#include "skas.h"
+#endif
+
+/* If needed we can detect when it's uninitialized. */
+static int host_supports_tls = -1;
+int host_gdt_entry_tls_min = -1;
+
+#ifdef CONFIG_MODE_SKAS
+int do_set_thread_area_skas(struct user_desc *info)
+{
+ int ret;
+ u32 cpu;
+
+ cpu = get_cpu();
+ ret = os_set_thread_area(info, userspace_pid[cpu]);
+ put_cpu();
+ return ret;
+}
+
+int do_get_thread_area_skas(struct user_desc *info)
+{
+ int ret;
+ u32 cpu;
+
+ cpu = get_cpu();
+ ret = os_get_thread_area(info, userspace_pid[cpu]);
+ put_cpu();
+ return ret;
+}
+#endif
+
+/*
+ * sys_get_thread_area: get a yet unused TLS descriptor index.
+ * XXX: Consider leaving one free slot for glibc usage at first place. This must
+ * be done here (and by changing GDT_ENTRY_TLS_* macros) and nowhere else.
+ *
+ * Also, this must be tested when compiling in SKAS mode with dinamic linking
+ * and running against NPTL.
+ */
+static int get_free_idx(struct task_struct* task)
+{
+ struct thread_struct *t = &task->thread;
+ int idx;
+
+ if (!t->arch.tls_array)
+ return GDT_ENTRY_TLS_MIN;
+
+ for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
+ if (!t->arch.tls_array[idx].present)
+ return idx + GDT_ENTRY_TLS_MIN;
+ return -ESRCH;
+}
+
+static inline void clear_user_desc(struct user_desc* info)
+{
+ /* Postcondition: LDT_empty(info) returns true. */
+ memset(info, 0, sizeof(*info));
+
+ /* Check the LDT_empty or the i386 sys_get_thread_area code - we obtain
+ * indeed an empty user_desc.
+ */
+ info->read_exec_only = 1;
+ info->seg_not_present = 1;
+}
+
+#define O_FORCE 1
+
+static int load_TLS(int flags, struct task_struct *to)
+{
+ int ret = 0;
+ int idx;
+
+ for (idx = GDT_ENTRY_TLS_MIN; idx < GDT_ENTRY_TLS_MAX; idx++) {
+ struct uml_tls_struct* curr = &to->thread.arch.tls_array[idx - GDT_ENTRY_TLS_MIN];
+
+ /* Actually, now if it wasn't flushed it gets cleared and
+ * flushed to the host, which will clear it.*/
+ if (!curr->present) {
+ if (!curr->flushed) {
+ clear_user_desc(&curr->tls);
+ curr->tls.entry_number = idx;
+ } else {
+ WARN_ON(!LDT_empty(&curr->tls));
+ continue;
+ }
+ }
+
+ if (!(flags & O_FORCE) && curr->flushed)
+ continue;
+
+ ret = do_set_thread_area(&curr->tls);
+ if (ret)
+ goto out;
+
+ curr->flushed = 1;
+ }
+out:
+ return ret;
+}
+
+/* Verify if we need to do a flush for the new process, i.e. if there are any
+ * present desc's, only if they haven't been flushed.
+ */
+static inline int needs_TLS_update(struct task_struct *task)
+{
+ int i;
+ int ret = 0;
+
+ for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
+ struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+
+ /* Can't test curr->present, we may need to clear a descriptor
+ * which had a value. */
+ if (curr->flushed)
+ continue;
+ ret = 1;
+ break;
+ }
+ return ret;
+}
+
+/* On a newly forked process, the TLS descriptors haven't yet been flushed. So
+ * we mark them as such and the first switch_to will do the job.
+ */
+void clear_flushed_tls(struct task_struct *task)
+{
+ int i;
+
+ for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
+ struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+
+ /* Still correct to do this, if it wasn't present on the host it
+ * will remain as flushed as it was. */
+ if (!curr->present)
+ continue;
+
+ curr->flushed = 0;
+ }
+}
+
+/* In SKAS0 mode, currently, multiple guest threads sharing the same ->mm have a
+ * common host process. So this is needed in SKAS0 too.
+ *
+ * However, if each thread had a different host process (and this was discussed
+ * for SMP support) this won't be needed.
+ *
+ * And this will not need be used when (and if) we'll add support to the host
+ * SKAS patch. */
+
+int arch_switch_tls_skas(struct task_struct *from, struct task_struct *to)
+{
+ if (!host_supports_tls)
+ return 0;
+
+ /* We have no need whatsoever to switch TLS for kernel threads; beyond
+ * that, that would also result in us calling os_set_thread_area with
+ * userspace_pid[cpu] == 0, which gives an error. */
+ if (likely(to->mm))
+ return load_TLS(O_FORCE, to);
+
+ return 0;
+}
+
+int arch_switch_tls_tt(struct task_struct *from, struct task_struct *to)
+{
+ if (!host_supports_tls)
+ return 0;
+
+ if (needs_TLS_update(to))
+ return load_TLS(0, to);
+
+ return 0;
+}
+
+static int set_tls_entry(struct task_struct* task, struct user_desc *info,
+ int idx, int flushed)
+{
+ struct thread_struct *t = &task->thread;
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].tls = *info;
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].present = 1;
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed = flushed;
+
+ return 0;
+}
+
+int arch_copy_tls(struct task_struct *new)
+{
+ struct user_desc info;
+ int idx, ret = -EFAULT;
+
+ if (copy_from_user(&info,
+ (void __user *) UPT_ESI(&new->thread.regs.regs),
+ sizeof(info)))
+ goto out;
+
+ ret = -EINVAL;
+ if (LDT_empty(&info))
+ goto out;
+
+ idx = info.entry_number;
+
+ ret = set_tls_entry(new, &info, idx, 0);
+out:
+ return ret;
+}
+
+/* XXX: use do_get_thread_area to read the host value? I'm not at all sure! */
+static int get_tls_entry(struct task_struct* task, struct user_desc *info, int idx)
+{
+ struct thread_struct *t = &task->thread;
+
+ if (!t->arch.tls_array)
+ goto clear;
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ if (!t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].present)
+ goto clear;
+
+ *info = t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].tls;
+
+out:
+ /* Temporary debugging check, to make sure that things have been
+ * flushed. This could be triggered if load_TLS() failed.
+ */
+ if (unlikely(task == current && !t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed)) {
+ printk(KERN_ERR "get_tls_entry: task with pid %d got here "
+ "without flushed TLS.", current->pid);
+ }
+
+ return 0;
+clear:
+ /* When the TLS entry has not been set, the values read to user in the
+ * tls_array are 0 (because it's cleared at boot, see
+ * arch/i386/kernel/head.S:cpu_gdt_table). Emulate that.
+ */
+ clear_user_desc(info);
+ info->entry_number = idx;
+ goto out;
+}
+
+asmlinkage int sys_set_thread_area(struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int idx, ret;
+
+ if (!host_supports_tls)
+ return -ENOSYS;
+
+ if (copy_from_user(&info, user_desc, sizeof(info)))
+ return -EFAULT;
+
+ idx = info.entry_number;
+
+ if (idx == -1) {
+ idx = get_free_idx(current);
+ if (idx < 0)
+ return idx;
+ info.entry_number = idx;
+ /* Tell the user which slot we chose for him.*/
+ if (put_user(idx, &user_desc->entry_number))
+ return -EFAULT;
+ }
+
+ ret = CHOOSE_MODE_PROC(do_set_thread_area_tt, do_set_thread_area_skas, &info);
+ if (ret)
+ return ret;
+ return set_tls_entry(current, &info, idx, 1);
+}
+
+/*
+ * Perform set_thread_area on behalf of the traced child.
+ * Note: error handling is not done on the deferred load, and this differ from
+ * i386. However the only possible error are caused by bugs.
+ */
+int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+
+ if (!host_supports_tls)
+ return -EIO;
+
+ if (copy_from_user(&info, user_desc, sizeof(info)))
+ return -EFAULT;
+
+ return set_tls_entry(child, &info, idx, 0);
+}
+
+asmlinkage int sys_get_thread_area(struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int idx, ret;
+
+ if (!host_supports_tls)
+ return -ENOSYS;
+
+ if (get_user(idx, &user_desc->entry_number))
+ return -EFAULT;
+
+ ret = get_tls_entry(current, &info, idx);
+ if (ret < 0)
+ goto out;
+
+ if (copy_to_user(user_desc, &info, sizeof(info)))
+ ret = -EFAULT;
+
+out:
+ return ret;
+}
+
+/*
+ * Perform get_thread_area on behalf of the traced child.
+ */
+int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int ret;
+
+ if (!host_supports_tls)
+ return -EIO;
+
+ ret = get_tls_entry(child, &info, idx);
+ if (ret < 0)
+ goto out;
+
+ if (copy_to_user(user_desc, &info, sizeof(info)))
+ ret = -EFAULT;
+out:
+ return ret;
+}
+
+
+/* XXX: This part is probably common to i386 and x86-64. Don't create a common
+ * file for now, do that when implementing x86-64 support.*/
+static int __init __setup_host_supports_tls(void) {
+ check_host_supports_tls(&host_supports_tls, &host_gdt_entry_tls_min);
+ if (host_supports_tls) {
+ printk(KERN_INFO "Host TLS support detected\n");
+ printk(KERN_INFO "Detected host type: ");
+ switch (host_gdt_entry_tls_min) {
+ case GDT_ENTRY_TLS_MIN_I386:
+ printk("i386\n");
+ break;
+ case GDT_ENTRY_TLS_MIN_X86_64:
+ printk("x86_64\n");
+ break;
+ }
+ } else
+ printk(KERN_ERR " Host TLS support NOT detected! "
+ "TLS support inside UML will not work\n");
+ return 1;
+}
+
+__initcall(__setup_host_supports_tls);
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index a351091..b5fc22b 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -4,31 +4,23 @@
# Licensed under the GPL
#
-#XXX: why into lib-y?
-lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \
- ptrace.o ptrace_user.o sigcontext.o signal.o syscalls.o \
- syscall_table.o sysrq.o thunk.o
-lib-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
+obj-y = bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
+ sigcontext.o signal.o syscalls.o syscall_table.o sysrq.o ksyms.o \
+ tls.o
-obj-y := ksyms.o
-obj-$(CONFIG_MODULES) += module.o um_module.o
+obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
+obj-$(CONFIG_MODULES) += um_module.o
+
+subarch-obj-y = lib/bitops.o lib/csum-partial.o lib/memcpy.o lib/thunk.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
+
+ldt-y = ../sys-i386/ldt.o
USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
-SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \
- thunk.S module.c
-
include arch/um/scripts/Makefile.rules
-bitops.c-dir = lib
-csum-copy.S-dir = lib
-csum-partial.c-dir = lib
-csum-wrappers.c-dir = lib
-ldt.c-dir = /arch/um/sys-i386
-memcpy.S-dir = lib
-thunk.S-dir = lib
-module.c-dir = kernel
+extra-$(CONFIG_MODE_TT) += unmap.o
-$(obj)/stub_segv.o: _c_flags = $(call unprofile,$(CFLAGS))
-
-include arch/um/scripts/Makefile.unmap
+$(obj)/stub_segv.o $(obj)/unmap.o: \
+ _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-x86_64/tls.c b/arch/um/sys-x86_64/tls.c
new file mode 100644
index 0000000..ce1bf1b
--- /dev/null
+++ b/arch/um/sys-x86_64/tls.c
@@ -0,0 +1,14 @@
+#include "linux/sched.h"
+
+void debug_arch_force_load_TLS(void)
+{
+}
+
+void clear_flushed_tls(struct task_struct *task)
+{
+}
+
+int arch_copy_tls(struct task_struct *t)
+{
+ return 0;
+}
diff --git a/arch/x86_64/ia32/vsyscall-sigreturn.S b/arch/x86_64/ia32/vsyscall-sigreturn.S
index d90321f..1384367 100644
--- a/arch/x86_64/ia32/vsyscall-sigreturn.S
+++ b/arch/x86_64/ia32/vsyscall-sigreturn.S
@@ -32,9 +32,28 @@
.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
.section .eh_frame,"a",@progbits
+.LSTARTFRAMES:
+ .long .LENDCIES-.LSTARTCIES
+.LSTARTCIES:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zRS" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIES:
+
.long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
.LSTARTFDE2:
- .long .LSTARTFDE2-.LSTARTFRAME /* CIE pointer */
+ .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */
/* HACK: The dwarf2 unwind routines will subtract 1 from the
return address to get an address in the middle of the
presumed call instruction. Since we didn't get here via
@@ -97,7 +116,7 @@
.long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
.LSTARTFDE3:
- .long .LSTARTFDE3-.LSTARTFRAME /* CIE pointer */
+ .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */
/* HACK: See above wrt unwind library assumptions. */
.long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
.long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index d546201..100a30c 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -615,7 +615,7 @@
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug", str);
- return 0;
+ return 1;
}
__setup("apic=", apic_set_verbosity);
@@ -1137,35 +1137,35 @@
static __init int setup_disableapic(char *str)
{
disable_apic = 1;
- return 0;
+ return 1;
}
static __init int setup_nolapic(char *str)
{
disable_apic = 1;
- return 0;
+ return 1;
}
static __init int setup_noapictimer(char *str)
{
if (str[0] != ' ' && str[0] != 0)
- return -1;
+ return 0;
disable_apic_timer = 1;
- return 0;
+ return 1;
}
static __init int setup_apicmaintimer(char *str)
{
apic_runs_main_timer = 1;
nohpet = 1;
- return 0;
+ return 1;
}
__setup("apicmaintimer", setup_apicmaintimer);
static __init int setup_noapicmaintimer(char *str)
{
apic_runs_main_timer = -1;
- return 0;
+ return 1;
}
__setup("noapicmaintimer", setup_noapicmaintimer);
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
index 13af920..b93ef5b 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86_64/kernel/early_printk.c
@@ -221,7 +221,7 @@
char buf[256];
if (early_console_initialized)
- return -1;
+ return 1;
strlcpy(buf,opt,sizeof(buf));
space = strchr(buf, ' ');
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 04282ef..10b3e34 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -501,7 +501,7 @@
static int __init mcheck_disable(char *str)
{
mce_dont_init = 1;
- return 0;
+ return 1;
}
/* mce=off disables machine check. Note you can reenable it later
@@ -521,7 +521,7 @@
get_option(&str, &tolerant);
else
printk("mce= argument %s ignored. Please use /sys", str);
- return 0;
+ return 1;
}
__setup("nomce", mcheck_disable);
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
index ee5ee48..b0444a4 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -121,7 +121,7 @@
static int __init nopmtimer_setup(char *s)
{
pmtmr_ioport = 0;
- return 0;
+ return 1;
}
__setup("nopmtimer", nopmtimer_setup);
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index d1f3e92..0856ad4 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -540,7 +540,7 @@
static int __init noreplacement_setup(char *s)
{
no_replacement = 1;
- return 0;
+ return 1;
}
__setup("noreplacement", noreplacement_setup);
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index eabdb63f..8a691fa 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -55,7 +55,7 @@
do_not_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
}
- return 0;
+ return 1;
}
__setup("noexec=", nonx_setup); /* parsed early actually */
@@ -74,7 +74,7 @@
force_personality32 &= ~READ_IMPLIES_EXEC;
else if (!strcmp(str, "off"))
force_personality32 |= READ_IMPLIES_EXEC;
- return 0;
+ return 1;
}
__setup("noexec32=", nonx32_setup);
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index ea48fa6..71a7222 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -353,7 +353,7 @@
static __init int notscsync_setup(char *s)
{
notscsync = 1;
- return 0;
+ return 1;
}
__setup("notscsync", notscsync_setup);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 473b514..ef8bc46 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -1306,7 +1306,7 @@
static int __init nohpet_setup(char *s)
{
nohpet = 1;
- return 0;
+ return 1;
}
__setup("nohpet", nohpet_setup);
@@ -1314,7 +1314,7 @@
int __init notsc_setup(char *s)
{
notsc = 1;
- return 0;
+ return 1;
}
__setup("notsc", notsc_setup);
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index edaa9fe..6bda322 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -973,14 +973,14 @@
static int __init oops_dummy(char *s)
{
panic_on_oops = 1;
- return -1;
+ return 1;
}
__setup("oops=", oops_dummy);
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s,NULL,0);
- return 0;
+ return 1;
}
__setup("kstack=", kstack_setup);
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index d96a934..d78f460 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -102,8 +102,6 @@
EXPORT_SYMBOL(screen_info);
#endif
-EXPORT_SYMBOL(get_wchan);
-
EXPORT_SYMBOL(rtc_lock);
EXPORT_SYMBOL_GPL(set_nmi_callback);
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 316c53d..5525059 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -623,6 +623,6 @@
static int __init enable_pagefaulttrace(char *str)
{
page_fault_trace = 1;
- return 0;
+ return 1;
}
__setup("pagefaulttrace", enable_pagefaulttrace);
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index efae56a..152b937 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -113,8 +113,6 @@
// FIXME EXPORT_SYMBOL(screen_info);
#endif
-EXPORT_SYMBOL(get_wchan);
-
EXPORT_SYMBOL(outsb);
EXPORT_SYMBOL(outsw);
EXPORT_SYMBOL(outsl);
diff --git a/block/Kconfig b/block/Kconfig
index 5536839..b6f5f0a 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -27,10 +27,10 @@
config LSF
bool "Support for Large Single Files"
depends on X86 || (MIPS && 32BIT) || PPC32 || ARCH_S390_31 || SUPERH || UML
- default n
help
- When CONFIG_LBD is disabled, say Y here if you want to
- handle large file(bigger than 2TB), otherwise say N.
- When CONFIG_LBD is enabled, Y is set automatically.
+ Say Y here if you want to be able to handle very large files (bigger
+ than 2TB), otherwise say N.
+
+ If unsure, say Y.
source block/Kconfig.iosched
diff --git a/block/elevator.c b/block/elevator.c
index 56c2ed0..0d6be03 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -145,7 +145,7 @@
strcpy(chosen_elevator, "anticipatory");
else
strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
- return 0;
+ return 1;
}
__setup("elevator=", elevator_setup);
diff --git a/block/genhd.c b/block/genhd.c
index db4c60c..5a8d3bf 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -17,8 +17,6 @@
#include <linux/buffer_head.h>
#include <linux/mutex.h>
-#define MAX_PROBE_HASH 255 /* random */
-
static struct subsystem block_subsys;
static DEFINE_MUTEX(block_subsys_lock);
@@ -31,108 +29,29 @@
struct blk_major_name *next;
int major;
char name[16];
-} *major_names[MAX_PROBE_HASH];
+} *major_names[BLKDEV_MAJOR_HASH_SIZE];
/* index in the above - for now: assume no multimajor ranges */
static inline int major_to_index(int major)
{
- return major % MAX_PROBE_HASH;
+ return major % BLKDEV_MAJOR_HASH_SIZE;
}
-struct blkdev_info {
- int index;
- struct blk_major_name *bd;
-};
+#ifdef CONFIG_PROC_FS
-/*
- * iterate over a list of blkdev_info structures. allows
- * the major_names array to be iterated over from outside this file
- * must be called with the block_subsys_lock held
- */
-void *get_next_blkdev(void *dev)
+void blkdev_show(struct seq_file *f, off_t offset)
{
- struct blkdev_info *info;
+ struct blk_major_name *dp;
- if (dev == NULL) {
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto out;
- info->index=0;
- info->bd = major_names[info->index];
- if (info->bd)
- goto out;
- } else {
- info = dev;
- }
-
- while (info->index < ARRAY_SIZE(major_names)) {
- if (info->bd)
- info->bd = info->bd->next;
- if (info->bd)
- goto out;
- /*
- * No devices on this chain, move to the next
- */
- info->index++;
- info->bd = (info->index < ARRAY_SIZE(major_names)) ?
- major_names[info->index] : NULL;
- if (info->bd)
- goto out;
- }
-
-out:
- return info;
-}
-
-void *acquire_blkdev_list(void)
-{
- mutex_lock(&block_subsys_lock);
- return get_next_blkdev(NULL);
-}
-
-void release_blkdev_list(void *dev)
-{
- mutex_unlock(&block_subsys_lock);
- kfree(dev);
-}
-
-
-/*
- * Count the number of records in the blkdev_list.
- * must be called with the block_subsys_lock held
- */
-int count_blkdev_list(void)
-{
- struct blk_major_name *n;
- int i, count;
-
- count = 0;
-
- for (i = 0; i < ARRAY_SIZE(major_names); i++) {
- for (n = major_names[i]; n; n = n->next)
- count++;
+ if (offset < BLKDEV_MAJOR_HASH_SIZE) {
+ mutex_lock(&block_subsys_lock);
+ for (dp = major_names[offset]; dp; dp = dp->next)
+ seq_printf(f, "%3d %s\n", dp->major, dp->name);
+ mutex_unlock(&block_subsys_lock);
}
-
- return count;
}
-/*
- * extract the major and name values from a blkdev_info struct
- * passed in as a void to *dev. Must be called with
- * block_subsys_lock held
- */
-int get_blkdev_info(void *dev, int *major, char **name)
-{
- struct blkdev_info *info = dev;
-
- if (info->bd == NULL)
- return 1;
-
- *major = info->bd->major;
- *name = info->bd->name;
- return 0;
-}
-
+#endif /* CONFIG_PROC_FS */
int register_blkdev(unsigned int major, const char *name)
{
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 9f5c0da..5c91d6a 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -64,6 +64,8 @@
source "drivers/mmc/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/infiniband/Kconfig"
source "drivers/sn/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 4249552..d6e8ffb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_EISA) += eisa/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
+obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 79b09d7..eee0864 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1572,7 +1572,7 @@
static int __init acpi_fake_ecdt_setup(char *str)
{
acpi_fake_ecdt_enabled = 1;
- return 0;
+ return 1;
}
__setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
@@ -1591,7 +1591,7 @@
acpi_ec_driver.ops.add = acpi_ec_poll_add;
}
printk(KERN_INFO PREFIX "EC %s mode.\n", intr ? "interrupt" : "polling");
- return 0;
+ return 1;
}
__setup("ec_intr=", acpi_ec_set_intr_mode);
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index b6e2909..2a8af68 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1850,6 +1850,7 @@
return 0;
printk (KERN_INFO "amiflop: Setting default df0 to %x\n", n);
fd_def_df0 = n;
+ return 1;
}
__setup("floppy=", amiga_floppy_setup);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 73d30bf..889cad0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -561,14 +561,31 @@
If unsure, say N.
+config HVC_DRIVER
+ bool
+ help
+ Users of pSeries machines that want to utilize the hvc console front-end
+ module for their backend console driver should select this option.
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+
config HVC_CONSOLE
bool "pSeries Hypervisor Virtual Console support"
depends on PPC_PSERIES
+ select HVC_DRIVER
help
pSeries machines when partitioned support a hypervisor virtual
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index b2a1124..a73cb49 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -41,7 +41,9 @@
obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
-obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o hvc_vio.o hvsi.o
+obj-$(CONFIG_HVC_DRIVER) += hvc_console.o
+obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o
+obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 107df9f..edc72a6 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -357,6 +357,12 @@
spinlock_t lock;
} drm_freelist_t;
+typedef struct drm_dma_handle {
+ dma_addr_t busaddr;
+ void *vaddr;
+ size_t size;
+} drm_dma_handle_t;
+
/**
* Buffer entry. There is one of this for each buffer size order.
*/
@@ -366,7 +372,7 @@
drm_buf_t *buflist; /**< buffer list */
int seg_count;
int page_order;
- unsigned long *seglist;
+ drm_dma_handle_t **seglist;
drm_freelist_t freelist;
} drm_buf_entry_t;
@@ -483,12 +489,6 @@
drm_hw_lock_t *lock;
} drm_sigdata_t;
-typedef struct drm_dma_handle {
- dma_addr_t busaddr;
- void *vaddr;
- size_t size;
-} drm_dma_handle_t;
-
/**
* Mappings list
*/
@@ -813,8 +813,6 @@
extern int drm_mem_info(char *buf, char **start, off_t offset,
int request, int *eof, void *data);
extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area);
-extern unsigned long drm_alloc_pages(int order, int area);
-extern void drm_free_pages(unsigned long address, int order, int area);
extern void *drm_ioremap(unsigned long offset, unsigned long size,
drm_device_t * dev);
extern void *drm_ioremap_nocache(unsigned long offset, unsigned long size,
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index e2637b4..8a9cf12 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -474,8 +474,7 @@
if (entry->seg_count) {
for (i = 0; i < entry->seg_count; i++) {
if (entry->seglist[i]) {
- drm_free_pages(entry->seglist[i],
- entry->page_order, DRM_MEM_DMA);
+ drm_pci_free(dev, entry->seglist[i]);
}
}
drm_free(entry->seglist,
@@ -678,7 +677,7 @@
int total;
int page_order;
drm_buf_entry_t *entry;
- unsigned long page;
+ drm_dma_handle_t *dmah;
drm_buf_t *buf;
int alignment;
unsigned long offset;
@@ -781,8 +780,10 @@
page_count = 0;
while (entry->buf_count < count) {
- page = drm_alloc_pages(page_order, DRM_MEM_DMA);
- if (!page) {
+
+ dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful);
+
+ if (!dmah) {
/* Set count correctly so we free the proper amount. */
entry->buf_count = count;
entry->seg_count = count;
@@ -794,13 +795,13 @@
atomic_dec(&dev->buf_alloc);
return -ENOMEM;
}
- entry->seglist[entry->seg_count++] = page;
+ entry->seglist[entry->seg_count++] = dmah;
for (i = 0; i < (1 << page_order); i++) {
DRM_DEBUG("page %d @ 0x%08lx\n",
dma->page_count + page_count,
- page + PAGE_SIZE * i);
+ (unsigned long)dmah->vaddr + PAGE_SIZE * i);
temp_pagelist[dma->page_count + page_count++]
- = page + PAGE_SIZE * i;
+ = (unsigned long)dmah->vaddr + PAGE_SIZE * i;
}
for (offset = 0;
offset + size <= total && entry->buf_count < count;
@@ -811,7 +812,8 @@
buf->order = order;
buf->used = 0;
buf->offset = (dma->byte_count + byte_count + offset);
- buf->address = (void *)(page + offset);
+ buf->address = (void *)(dmah->vaddr + offset);
+ buf->bus_address = dmah->busaddr + offset;
buf->next = NULL;
buf->waiting = 0;
buf->pending = 0;
diff --git a/drivers/char/drm/drm_dma.c b/drivers/char/drm/drm_dma.c
index 2afab95..892db70 100644
--- a/drivers/char/drm/drm_dma.c
+++ b/drivers/char/drm/drm_dma.c
@@ -85,9 +85,7 @@
dma->bufs[i].seg_count);
for (j = 0; j < dma->bufs[i].seg_count; j++) {
if (dma->bufs[i].seglist[j]) {
- drm_free_pages(dma->bufs[i].seglist[j],
- dma->bufs[i].page_order,
- DRM_MEM_DMA);
+ drm_pci_free(dev, dma->bufs[i].seglist[j]);
}
}
drm_free(dma->bufs[i].seglist,
diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c
index 8074771..dddf8de 100644
--- a/drivers/char/drm/drm_memory.c
+++ b/drivers/char/drm/drm_memory.c
@@ -79,65 +79,6 @@
return pt;
}
-/**
- * Allocate pages.
- *
- * \param order size order.
- * \param area memory area. (Not used.)
- * \return page address on success, or zero on failure.
- *
- * Allocate and reserve free pages.
- */
-unsigned long drm_alloc_pages(int order, int area)
-{
- unsigned long address;
- unsigned long bytes = PAGE_SIZE << order;
- unsigned long addr;
- unsigned int sz;
-
- address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
- if (!address)
- return 0;
-
- /* Zero */
- memset((void *)address, 0, bytes);
-
- /* Reserve */
- for (addr = address, sz = bytes;
- sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
- SetPageReserved(virt_to_page(addr));
- }
-
- return address;
-}
-
-/**
- * Free pages.
- *
- * \param address address of the pages to free.
- * \param order size order.
- * \param area memory area. (Not used.)
- *
- * Unreserve and free pages allocated by alloc_pages().
- */
-void drm_free_pages(unsigned long address, int order, int area)
-{
- unsigned long bytes = PAGE_SIZE << order;
- unsigned long addr;
- unsigned int sz;
-
- if (!address)
- return;
-
- /* Unreserve */
- for (addr = address, sz = bytes;
- sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- }
-
- free_pages(address, order);
-}
-
#if __OS_HAS_AGP
/** Wrapper around agp_allocate_memory() */
DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type)
diff --git a/drivers/char/drm/drm_memory_debug.h b/drivers/char/drm/drm_memory_debug.h
index e84605f..7868341 100644
--- a/drivers/char/drm/drm_memory_debug.h
+++ b/drivers/char/drm/drm_memory_debug.h
@@ -206,76 +206,6 @@
}
}
-unsigned long drm_alloc_pages (int order, int area) {
- unsigned long address;
- unsigned long bytes = PAGE_SIZE << order;
- unsigned long addr;
- unsigned int sz;
-
- spin_lock(&drm_mem_lock);
- if ((drm_ram_used >> PAGE_SHIFT)
- > (DRM_RAM_PERCENT * drm_ram_available) / 100) {
- spin_unlock(&drm_mem_lock);
- return 0;
- }
- spin_unlock(&drm_mem_lock);
-
- address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
- if (!address) {
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[area].fail_count;
- spin_unlock(&drm_mem_lock);
- return 0;
- }
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[area].succeed_count;
- drm_mem_stats[area].bytes_allocated += bytes;
- drm_ram_used += bytes;
- spin_unlock(&drm_mem_lock);
-
- /* Zero outside the lock */
- memset((void *)address, 0, bytes);
-
- /* Reserve */
- for (addr = address, sz = bytes;
- sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
- SetPageReserved(virt_to_page(addr));
- }
-
- return address;
-}
-
-void drm_free_pages (unsigned long address, int order, int area) {
- unsigned long bytes = PAGE_SIZE << order;
- int alloc_count;
- int free_count;
- unsigned long addr;
- unsigned int sz;
-
- if (!address) {
- DRM_MEM_ERROR(area, "Attempt to free address 0\n");
- } else {
- /* Unreserve */
- for (addr = address, sz = bytes;
- sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- }
- free_pages(address, order);
- }
-
- spin_lock(&drm_mem_lock);
- free_count = ++drm_mem_stats[area].free_count;
- alloc_count = drm_mem_stats[area].succeed_count;
- drm_mem_stats[area].bytes_freed += bytes;
- drm_ram_used -= bytes;
- spin_unlock(&drm_mem_lock);
- if (free_count > alloc_count) {
- DRM_MEM_ERROR(area,
- "Excess frees: %d frees, %d allocs\n",
- free_count, alloc_count);
- }
-}
-
void *drm_ioremap (unsigned long offset, unsigned long size,
drm_device_t * dev) {
void *pt;
diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c
index 1fd7ff1..b28ca9c 100644
--- a/drivers/char/drm/drm_pci.c
+++ b/drivers/char/drm/drm_pci.c
@@ -50,6 +50,10 @@
dma_addr_t maxaddr)
{
drm_dma_handle_t *dmah;
+#if 1
+ unsigned long addr;
+ size_t sz;
+#endif
#ifdef DRM_DEBUG_MEMORY
int area = DRM_MEM_DMA;
@@ -79,7 +83,7 @@
return NULL;
dmah->size = size;
- dmah->vaddr = pci_alloc_consistent(dev->pdev, size, &dmah->busaddr);
+ dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size, &dmah->busaddr, GFP_KERNEL | __GFP_COMP);
#ifdef DRM_DEBUG_MEMORY
if (dmah->vaddr == NULL) {
@@ -104,18 +108,29 @@
memset(dmah->vaddr, 0, size);
+ /* XXX - Is virt_to_page() legal for consistent mem? */
+ /* Reserve */
+ for (addr = (unsigned long)dmah->vaddr, sz = size;
+ sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
+ SetPageReserved(virt_to_page(addr));
+ }
+
return dmah;
}
EXPORT_SYMBOL(drm_pci_alloc);
/**
- * \brief Free a PCI consistent memory block with freeing its descriptor.
+ * \brief Free a PCI consistent memory block without freeing its descriptor.
*
* This function is for internal use in the Linux-specific DRM core code.
*/
void __drm_pci_free(drm_device_t * dev, drm_dma_handle_t * dmah)
{
+#if 1
+ unsigned long addr;
+ size_t sz;
+#endif
#ifdef DRM_DEBUG_MEMORY
int area = DRM_MEM_DMA;
int alloc_count;
@@ -127,8 +142,14 @@
DRM_MEM_ERROR(area, "Attempt to free address 0\n");
#endif
} else {
- pci_free_consistent(dev->pdev, dmah->size, dmah->vaddr,
- dmah->busaddr);
+ /* XXX - Is virt_to_page() legal for consistent mem? */
+ /* Unreserve */
+ for (addr = (unsigned long)dmah->vaddr, sz = dmah->size;
+ sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ }
+ dma_free_coherent(&dev->pdev->dev, dmah->size, dmah->vaddr,
+ dmah->busaddr);
}
#ifdef DRM_DEBUG_MEMORY
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 2c17e88..b1bb3c7 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -3,49 +3,69 @@
Please contact dri-devel@lists.sf.net to add new cards to this list
*/
#define radeon_PCI_IDS \
- {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350},\
+ {0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x3E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x3E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|CHIP_IS_IGP}, \
{0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP}, \
{0x1002, 0x4144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+ {0x1002, 0x4148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x4149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x414A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x414B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
{0x1002, 0x4150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4156, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
- {0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS250|CHIP_IS_IGP}, \
+ {0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP}, \
{0x1002, 0x4242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x4243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x4336, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
{0x1002, 0x4337, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS250|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
- {0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
- {0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
- {0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
- {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
- {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
+ {0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+ {0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+ {0x1002, 0x4A48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x4B4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
{0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \
{0x1002, 0x4C5A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
- {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|CHIP_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
- {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
{0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
- {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+ {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
{0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
{0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
{0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4E52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x4E53, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
{0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
{0x1002, 0x4E56, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
{0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
@@ -53,44 +73,66 @@
{0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
{0x1002, 0x5147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
{0x1002, 0x5148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x5149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x514A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x514B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x514C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x514D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x514E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x514F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
{0x1002, 0x5158, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
{0x1002, 0x5159, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
{0x1002, 0x515A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
{0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x5168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x5169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
- {0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+ {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_IS_MOBILITY}, \
+ {0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5551, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5554, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x564A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x564B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
- {0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
- {0x1002, 0x5837, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x5963, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x5968, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x596A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x596B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5b64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5b65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|CHIP_NEW_MEMMAP}, \
{0x1002, 0x5c61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|CHIP_IS_MOBILITY}, \
- {0x1002, 0x5c62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5c63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|CHIP_IS_MOBILITY}, \
- {0x1002, 0x5c64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
- {0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
+ {0x1002, 0x5d48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5d57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x5e4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_NEW_MEMMAP}, \
+ {0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY|CHIP_NEW_MEMMAP}, \
{0, 0, 0}
#define r128_PCI_IDS \
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index 1ff4c7c..9f4b8ce 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -495,8 +495,6 @@
}
}
- dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
-
i915_emit_breadcrumb(dev);
return 0;
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index d3879ac..a752afd 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -53,6 +53,8 @@
I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+ dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+
if (temp & USER_INT_FLAG)
DRM_WAKEUP(&dev_priv->irq_queue);
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index c08fa50..b108c7f 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -214,13 +214,13 @@
ADD_RANGE(0x4F54, 1);
ADD_RANGE(R300_TX_FILTER_0, 16);
- ADD_RANGE(R300_TX_UNK1_0, 16);
+ ADD_RANGE(R300_TX_FILTER1_0, 16);
ADD_RANGE(R300_TX_SIZE_0, 16);
ADD_RANGE(R300_TX_FORMAT_0, 16);
ADD_RANGE(R300_TX_PITCH_0, 16);
/* Texture offset is dangerous and needs more checking */
ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET);
- ADD_RANGE(R300_TX_UNK4_0, 16);
+ ADD_RANGE(R300_TX_CHROMA_KEY_0, 16);
ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
/* Sporadic registers used as primitives are emitted */
@@ -242,8 +242,10 @@
return 0;
}
- /* we expect offsets passed to the framebuffer to be either within video memory or
- within AGP space */
+/*
+ * we expect offsets passed to the framebuffer to be either within video
+ * memory or within AGP space
+ */
static __inline__ int r300_check_offset(drm_radeon_private_t *dev_priv,
u32 offset)
{
@@ -251,11 +253,11 @@
but this value is not being kept.
This code is correct for now (does the same thing as the
code that sets MC_FB_LOCATION) in radeon_cp.c */
- if ((offset >= dev_priv->fb_location) &&
- (offset < dev_priv->gart_vm_start))
+ if (offset >= dev_priv->fb_location &&
+ offset < (dev_priv->fb_location + dev_priv->fb_size))
return 0;
- if ((offset >= dev_priv->gart_vm_start) &&
- (offset < dev_priv->gart_vm_start + dev_priv->gart_size))
+ if (offset >= dev_priv->gart_vm_start &&
+ offset < (dev_priv->gart_vm_start + dev_priv->gart_size))
return 0;
return 1;
}
@@ -490,6 +492,7 @@
return 0;
}
+
static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf)
{
@@ -701,6 +704,64 @@
buf->used = 0;
}
+static int r300_scratch(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ u32 *ref_age_base;
+ u32 i, buf_idx, h_pending;
+ RING_LOCALS;
+
+ if (cmdbuf->bufsz <
+ (sizeof(u64) + header.scratch.n_bufs * sizeof(buf_idx))) {
+ return DRM_ERR(EINVAL);
+ }
+
+ if (header.scratch.reg >= 5) {
+ return DRM_ERR(EINVAL);
+ }
+
+ dev_priv->scratch_ages[header.scratch.reg]++;
+
+ ref_age_base = *(u32 **)cmdbuf->buf;
+
+ cmdbuf->buf += sizeof(u64);
+ cmdbuf->bufsz -= sizeof(u64);
+
+ for (i=0; i < header.scratch.n_bufs; i++) {
+ buf_idx = *(u32 *)cmdbuf->buf;
+ buf_idx *= 2; /* 8 bytes per buf */
+
+ if (DRM_COPY_TO_USER(ref_age_base + buf_idx, &dev_priv->scratch_ages[header.scratch.reg], sizeof(u32))) {
+ return DRM_ERR(EINVAL);
+ }
+
+ if (DRM_COPY_FROM_USER(&h_pending, ref_age_base + buf_idx + 1, sizeof(u32))) {
+ return DRM_ERR(EINVAL);
+ }
+
+ if (h_pending == 0) {
+ return DRM_ERR(EINVAL);
+ }
+
+ h_pending--;
+
+ if (DRM_COPY_TO_USER(ref_age_base + buf_idx + 1, &h_pending, sizeof(u32))) {
+ return DRM_ERR(EINVAL);
+ }
+
+ cmdbuf->buf += sizeof(buf_idx);
+ cmdbuf->bufsz -= sizeof(buf_idx);
+ }
+
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(RADEON_SCRATCH_REG0 + header.scratch.reg * 4, 0));
+ OUT_RING(dev_priv->scratch_ages[header.scratch.reg]);
+ ADVANCE_RING();
+
+ return 0;
+}
+
/**
* Parses and validates a user-supplied command buffer and emits appropriate
* commands on the DMA ring buffer.
@@ -838,6 +899,15 @@
}
break;
+ case R300_CMD_SCRATCH:
+ DRM_DEBUG("R300_CMD_SCRATCH\n");
+ ret = r300_scratch(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_scratch failed\n");
+ goto cleanup;
+ }
+ break;
+
default:
DRM_ERROR("bad cmd_type %i at %p\n",
header.header.cmd_type,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index d1e1995..a881f96 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -711,8 +711,22 @@
# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21)
# define R300_TX_MAX_ANISO_MASK (14 << 21)
-#define R300_TX_UNK1_0 0x4440
+#define R300_TX_FILTER1_0 0x4440
+# define R300_CHROMA_KEY_MODE_DISABLE 0
+# define R300_CHROMA_KEY_FORCE 1
+# define R300_CHROMA_KEY_BLEND 2
+# define R300_MC_ROUND_NORMAL (0<<2)
+# define R300_MC_ROUND_MPEG4 (1<<2)
# define R300_LOD_BIAS_MASK 0x1fff
+# define R300_EDGE_ANISO_EDGE_DIAG (0<<13)
+# define R300_EDGE_ANISO_EDGE_ONLY (1<<13)
+# define R300_MC_COORD_TRUNCATE_DISABLE (0<<14)
+# define R300_MC_COORD_TRUNCATE_MPEG (1<<14)
+# define R300_TX_TRI_PERF_0_8 (0<<15)
+# define R300_TX_TRI_PERF_1_8 (1<<15)
+# define R300_TX_TRI_PERF_1_4 (2<<15)
+# define R300_TX_TRI_PERF_3_8 (3<<15)
+# define R300_ANISO_THRESHOLD_MASK (7<<17)
#define R300_TX_SIZE_0 0x4480
# define R300_TX_WIDTHMASK_SHIFT 0
@@ -722,6 +736,8 @@
# define R300_TX_UNK23 (1 << 23)
# define R300_TX_SIZE_SHIFT 26 /* largest of width, height */
# define R300_TX_SIZE_MASK (15 << 26)
+# define R300_TX_SIZE_PROJECTED (1<<30)
+# define R300_TX_SIZE_TXPITCH_EN (1<<31)
#define R300_TX_FORMAT_0 0x44C0
/* The interpretation of the format word by Wladimir van der Laan */
/* The X, Y, Z and W refer to the layout of the components.
@@ -750,7 +766,8 @@
# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */
# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */
/* 0x16 - some 16 bit green format.. ?? */
-# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */
+# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */
+# define R300_TX_FORMAT_CUBIC_MAP (1 << 26)
/* gap */
/* Floating point formats */
@@ -800,18 +817,20 @@
# define R300_TX_FORMAT_YUV_MODE 0x00800000
-#define R300_TX_PITCH_0 0x4500
+#define R300_TX_PITCH_0 0x4500 /* obvious missing in gap */
#define R300_TX_OFFSET_0 0x4540
/* BEGIN: Guess from R200 */
# define R300_TXO_ENDIAN_NO_SWAP (0 << 0)
# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0)
# define R300_TXO_ENDIAN_WORD_SWAP (2 << 0)
# define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0)
+# define R300_TXO_MACRO_TILE (1 << 2)
+# define R300_TXO_MICRO_TILE (1 << 3)
# define R300_TXO_OFFSET_MASK 0xffffffe0
# define R300_TXO_OFFSET_SHIFT 5
/* END */
-#define R300_TX_UNK4_0 0x4580
-#define R300_TX_BORDER_COLOR_0 0x45C0 //ff00ff00 == { 0, 1.0, 0, 1.0 }
+#define R300_TX_CHROMA_KEY_0 0x4580 /* 32 bit chroma key */
+#define R300_TX_BORDER_COLOR_0 0x45C0 //ff00ff00 == { 0, 1.0, 0, 1.0 }
/* END */
@@ -868,7 +887,9 @@
# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12)
# define R300_PFS_NODE_TEX_END_SHIFT 17
# define R300_PFS_NODE_TEX_END_MASK (31 << 17)
-# define R300_PFS_NODE_LAST_NODE (1 << 22)
+/*# define R300_PFS_NODE_LAST_NODE (1 << 22) */
+# define R300_PFS_NODE_OUTPUT_COLOR (1 << 22)
+# define R300_PFS_NODE_OUTPUT_DEPTH (1 << 23)
/* TEX
// As far as I can tell, texture instructions cannot write into output
@@ -887,6 +908,7 @@
*/
# define R300_FPITX_OPCODE_SHIFT 15
# define R300_FPITX_OP_TEX 1
+# define R300_FPITX_OP_KIL 2
# define R300_FPITX_OP_TXP 3
# define R300_FPITX_OP_TXB 4
@@ -962,9 +984,11 @@
# define R300_FPI1_SRC2C_CONST (1 << 17)
# define R300_FPI1_DSTC_SHIFT 18
# define R300_FPI1_DSTC_MASK (31 << 18)
+# define R300_FPI1_DSTC_REG_MASK_SHIFT 23
# define R300_FPI1_DSTC_REG_X (1 << 23)
# define R300_FPI1_DSTC_REG_Y (1 << 24)
# define R300_FPI1_DSTC_REG_Z (1 << 25)
+# define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT 26
# define R300_FPI1_DSTC_OUTPUT_X (1 << 26)
# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27)
# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28)
@@ -983,6 +1007,7 @@
# define R300_FPI3_DSTA_MASK (31 << 18)
# define R300_FPI3_DSTA_REG (1 << 23)
# define R300_FPI3_DSTA_OUTPUT (1 << 24)
+# define R300_FPI3_DSTA_DEPTH (1 << 27)
#define R300_PFS_INSTR0_0 0x48C0
# define R300_FPI0_ARGC_SRC0C_XYZ 0
@@ -1036,7 +1061,7 @@
# define R300_FPI0_OUTC_FRC (9 << 23)
# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23)
# define R300_FPI0_OUTC_SAT (1 << 30)
-# define R300_FPI0_UNKNOWN_31 (1 << 31)
+# define R300_FPI0_INSERT_NOP (1 << 31)
#define R300_PFS_INSTR2_0 0x49C0
# define R300_FPI2_ARGA_SRC0C_X 0
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index 9bb8ae0..7f949c9 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -1118,14 +1118,20 @@
{
u32 ring_start, cur_read_ptr;
u32 tmp;
-
- /* Initialize the memory controller */
- RADEON_WRITE(RADEON_MC_FB_LOCATION,
- ((dev_priv->gart_vm_start - 1) & 0xffff0000)
- | (dev_priv->fb_location >> 16));
+
+ /* Initialize the memory controller. With new memory map, the fb location
+ * is not changed, it should have been properly initialized already. Part
+ * of the problem is that the code below is bogus, assuming the GART is
+ * always appended to the fb which is not necessarily the case
+ */
+ if (!dev_priv->new_memmap)
+ RADEON_WRITE(RADEON_MC_FB_LOCATION,
+ ((dev_priv->gart_vm_start - 1) & 0xffff0000)
+ | (dev_priv->fb_location >> 16));
#if __OS_HAS_AGP
if (dev_priv->flags & CHIP_IS_AGP) {
+ RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
RADEON_WRITE(RADEON_MC_AGP_LOCATION,
(((dev_priv->gart_vm_start - 1 +
dev_priv->gart_size) & 0xffff0000) |
@@ -1153,8 +1159,6 @@
#if __OS_HAS_AGP
if (dev_priv->flags & CHIP_IS_AGP) {
- /* set RADEON_AGP_BASE here instead of relying on X from user space */
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
RADEON_WRITE(RADEON_CP_RB_RPTR_ADDR,
dev_priv->ring_rptr->offset
- dev->agp->base + dev_priv->gart_vm_start);
@@ -1174,6 +1178,17 @@
entry->handle + tmp_ofs);
}
+ /* Set ring buffer size */
+#ifdef __BIG_ENDIAN
+ RADEON_WRITE(RADEON_CP_RB_CNTL,
+ dev_priv->ring.size_l2qw | RADEON_BUF_SWAP_32BIT);
+#else
+ RADEON_WRITE(RADEON_CP_RB_CNTL, dev_priv->ring.size_l2qw);
+#endif
+
+ /* Start with assuming that writeback doesn't work */
+ dev_priv->writeback_works = 0;
+
/* Initialize the scratch register pointer. This will cause
* the scratch register values to be written out to memory
* whenever they are updated.
@@ -1190,7 +1205,38 @@
RADEON_WRITE(RADEON_SCRATCH_UMSK, 0x7);
- /* Writeback doesn't seem to work everywhere, test it first */
+ /* Turn on bus mastering */
+ tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
+ RADEON_WRITE(RADEON_BUS_CNTL, tmp);
+
+ dev_priv->sarea_priv->last_frame = dev_priv->scratch[0] = 0;
+ RADEON_WRITE(RADEON_LAST_FRAME_REG, dev_priv->sarea_priv->last_frame);
+
+ dev_priv->sarea_priv->last_dispatch = dev_priv->scratch[1] = 0;
+ RADEON_WRITE(RADEON_LAST_DISPATCH_REG,
+ dev_priv->sarea_priv->last_dispatch);
+
+ dev_priv->sarea_priv->last_clear = dev_priv->scratch[2] = 0;
+ RADEON_WRITE(RADEON_LAST_CLEAR_REG, dev_priv->sarea_priv->last_clear);
+
+ radeon_do_wait_for_idle(dev_priv);
+
+ /* Sync everything up */
+ RADEON_WRITE(RADEON_ISYNC_CNTL,
+ (RADEON_ISYNC_ANY2D_IDLE3D |
+ RADEON_ISYNC_ANY3D_IDLE2D |
+ RADEON_ISYNC_WAIT_IDLEGUI |
+ RADEON_ISYNC_CPSCRATCH_IDLEGUI));
+
+}
+
+static void radeon_test_writeback(drm_radeon_private_t * dev_priv)
+{
+ u32 tmp;
+
+ /* Writeback doesn't seem to work everywhere, test it here and possibly
+ * enable it if it appears to work
+ */
DRM_WRITE32(dev_priv->ring_rptr, RADEON_SCRATCHOFF(1), 0);
RADEON_WRITE(RADEON_SCRATCH_REG1, 0xdeadbeef);
@@ -1203,46 +1249,15 @@
if (tmp < dev_priv->usec_timeout) {
dev_priv->writeback_works = 1;
- DRM_DEBUG("writeback test succeeded, tmp=%d\n", tmp);
+ DRM_INFO("writeback test succeeded in %d usecs\n", tmp);
} else {
dev_priv->writeback_works = 0;
- DRM_DEBUG("writeback test failed\n");
+ DRM_INFO("writeback test failed\n");
}
if (radeon_no_wb == 1) {
dev_priv->writeback_works = 0;
- DRM_DEBUG("writeback forced off\n");
+ DRM_INFO("writeback forced off\n");
}
-
- dev_priv->sarea_priv->last_frame = dev_priv->scratch[0] = 0;
- RADEON_WRITE(RADEON_LAST_FRAME_REG, dev_priv->sarea_priv->last_frame);
-
- dev_priv->sarea_priv->last_dispatch = dev_priv->scratch[1] = 0;
- RADEON_WRITE(RADEON_LAST_DISPATCH_REG,
- dev_priv->sarea_priv->last_dispatch);
-
- dev_priv->sarea_priv->last_clear = dev_priv->scratch[2] = 0;
- RADEON_WRITE(RADEON_LAST_CLEAR_REG, dev_priv->sarea_priv->last_clear);
-
- /* Set ring buffer size */
-#ifdef __BIG_ENDIAN
- RADEON_WRITE(RADEON_CP_RB_CNTL,
- dev_priv->ring.size_l2qw | RADEON_BUF_SWAP_32BIT);
-#else
- RADEON_WRITE(RADEON_CP_RB_CNTL, dev_priv->ring.size_l2qw);
-#endif
-
- radeon_do_wait_for_idle(dev_priv);
-
- /* Turn on bus mastering */
- tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
- RADEON_WRITE(RADEON_BUS_CNTL, tmp);
-
- /* Sync everything up */
- RADEON_WRITE(RADEON_ISYNC_CNTL,
- (RADEON_ISYNC_ANY2D_IDLE3D |
- RADEON_ISYNC_ANY3D_IDLE2D |
- RADEON_ISYNC_WAIT_IDLEGUI |
- RADEON_ISYNC_CPSCRATCH_IDLEGUI));
}
/* Enable or disable PCI-E GART on the chip */
@@ -1317,6 +1332,14 @@
DRM_DEBUG("\n");
+ /* if we require new memory map but we don't have it fail */
+ if ((dev_priv->flags & CHIP_NEW_MEMMAP) && !dev_priv->new_memmap)
+ {
+ DRM_ERROR("Cannot initialise DRM on this card\nThis card requires a new X.org DDX\n");
+ radeon_do_cleanup_cp(dev);
+ return DRM_ERR(EINVAL);
+ }
+
if (init->is_pci && (dev_priv->flags & CHIP_IS_AGP))
{
DRM_DEBUG("Forcing AGP card to PCI mode\n");
@@ -1496,6 +1519,9 @@
dev_priv->fb_location = (RADEON_READ(RADEON_MC_FB_LOCATION)
& 0xffff) << 16;
+ dev_priv->fb_size =
+ ((RADEON_READ(RADEON_MC_FB_LOCATION) & 0xffff0000u) + 0x10000)
+ - dev_priv->fb_location;
dev_priv->front_pitch_offset = (((dev_priv->front_pitch / 64) << 22) |
((dev_priv->front_offset
@@ -1510,8 +1536,46 @@
+ dev_priv->fb_location) >> 10));
dev_priv->gart_size = init->gart_size;
- dev_priv->gart_vm_start = dev_priv->fb_location
- + RADEON_READ(RADEON_CONFIG_APER_SIZE);
+
+ /* New let's set the memory map ... */
+ if (dev_priv->new_memmap) {
+ u32 base = 0;
+
+ DRM_INFO("Setting GART location based on new memory map\n");
+
+ /* If using AGP, try to locate the AGP aperture at the same
+ * location in the card and on the bus, though we have to
+ * align it down.
+ */
+#if __OS_HAS_AGP
+ if (dev_priv->flags & CHIP_IS_AGP) {
+ base = dev->agp->base;
+ /* Check if valid */
+ if ((base + dev_priv->gart_size) > dev_priv->fb_location &&
+ base < (dev_priv->fb_location + dev_priv->fb_size)) {
+ DRM_INFO("Can't use AGP base @0x%08lx, won't fit\n",
+ dev->agp->base);
+ base = 0;
+ }
+ }
+#endif
+ /* If not or if AGP is at 0 (Macs), try to put it elsewhere */
+ if (base == 0) {
+ base = dev_priv->fb_location + dev_priv->fb_size;
+ if (((base + dev_priv->gart_size) & 0xfffffffful)
+ < base)
+ base = dev_priv->fb_location
+ - dev_priv->gart_size;
+ }
+ dev_priv->gart_vm_start = base & 0xffc00000u;
+ if (dev_priv->gart_vm_start != base)
+ DRM_INFO("GART aligned down from 0x%08x to 0x%08x\n",
+ base, dev_priv->gart_vm_start);
+ } else {
+ DRM_INFO("Setting GART location based on old memory map\n");
+ dev_priv->gart_vm_start = dev_priv->fb_location +
+ RADEON_READ(RADEON_CONFIG_APER_SIZE);
+ }
#if __OS_HAS_AGP
if (dev_priv->flags & CHIP_IS_AGP)
@@ -1596,6 +1660,7 @@
dev_priv->last_buf = 0;
radeon_do_engine_reset(dev);
+ radeon_test_writeback(dev_priv);
return 0;
}
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index 9c177a6..c8e279e 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -222,6 +222,7 @@
# define R300_WAIT_3D 0x2
# define R300_WAIT_2D_CLEAN 0x3
# define R300_WAIT_3D_CLEAN 0x4
+#define R300_CMD_SCRATCH 8
typedef union {
unsigned int u;
@@ -247,6 +248,9 @@
struct {
unsigned char cmd_type, flags, pad0, pad1;
} wait;
+ struct {
+ unsigned char cmd_type, reg, n_bufs, flags;
+ } scratch;
} drm_r300_cmd_header_t;
#define RADEON_FRONT 0x1
@@ -697,6 +701,7 @@
#define RADEON_SETPARAM_FB_LOCATION 1 /* determined framebuffer location */
#define RADEON_SETPARAM_SWITCH_TILING 2 /* enable/disable color tiling */
#define RADEON_SETPARAM_PCIGART_LOCATION 3 /* PCI Gart Location */
+#define RADEON_SETPARAM_NEW_MEMMAP 4 /* Use new memory map */
/* 1.14: Clients can allocate/free a surface
*/
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index 1f7d2ab..78345ce 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -38,7 +38,7 @@
#define DRIVER_NAME "radeon"
#define DRIVER_DESC "ATI Radeon"
-#define DRIVER_DATE "20051229"
+#define DRIVER_DATE "20060225"
/* Interface history:
*
@@ -91,9 +91,11 @@
* 1.20- Add support for r300 texrect
* 1.21- Add support for card type getparam
* 1.22- Add support for texture cache flushes (R300_TX_CNTL)
+ * 1.23- Add new radeon memory map work from benh
+ * 1.24- Add general-purpose packet for manipulating scratch registers (r300)
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 22
+#define DRIVER_MINOR 24
#define DRIVER_PATCHLEVEL 0
/*
@@ -101,20 +103,21 @@
*/
enum radeon_family {
CHIP_R100,
- CHIP_RS100,
CHIP_RV100,
+ CHIP_RS100,
CHIP_RV200,
- CHIP_R200,
CHIP_RS200,
- CHIP_R250,
- CHIP_RS250,
+ CHIP_R200,
CHIP_RV250,
+ CHIP_RS300,
CHIP_RV280,
CHIP_R300,
- CHIP_RS300,
CHIP_R350,
CHIP_RV350,
+ CHIP_RV380,
CHIP_R420,
+ CHIP_RV410,
+ CHIP_RS400,
CHIP_LAST,
};
@@ -136,9 +139,11 @@
CHIP_IS_AGP = 0x00080000UL,
CHIP_HAS_HIERZ = 0x00100000UL,
CHIP_IS_PCIE = 0x00200000UL,
+ CHIP_NEW_MEMMAP = 0x00400000UL,
};
-#define GET_RING_HEAD(dev_priv) DRM_READ32( (dev_priv)->ring_rptr, 0 )
+#define GET_RING_HEAD(dev_priv) (dev_priv->writeback_works ? \
+ DRM_READ32( (dev_priv)->ring_rptr, 0 ) : RADEON_READ(RADEON_CP_RB_RPTR))
#define SET_RING_HEAD(dev_priv,val) DRM_WRITE32( (dev_priv)->ring_rptr, 0, (val) )
typedef struct drm_radeon_freelist {
@@ -199,6 +204,8 @@
drm_radeon_sarea_t *sarea_priv;
u32 fb_location;
+ u32 fb_size;
+ int new_memmap;
int gart_size;
u32 gart_vm_start;
@@ -272,6 +279,8 @@
unsigned long pcigart_offset;
drm_ati_pcigart_info gart_info;
+ u32 scratch_ages[5];
+
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
} drm_radeon_private_t;
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 7bc2751..c5b8f77 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -45,22 +45,53 @@
u32 off = *offset;
struct drm_radeon_driver_file_fields *radeon_priv;
- if (off >= dev_priv->fb_location &&
- off < (dev_priv->gart_vm_start + dev_priv->gart_size))
+ /* Hrm ... the story of the offset ... So this function converts
+ * the various ideas of what userland clients might have for an
+ * offset in the card address space into an offset into the card
+ * address space :) So with a sane client, it should just keep
+ * the value intact and just do some boundary checking. However,
+ * not all clients are sane. Some older clients pass us 0 based
+ * offsets relative to the start of the framebuffer and some may
+ * assume the AGP aperture it appended to the framebuffer, so we
+ * try to detect those cases and fix them up.
+ *
+ * Note: It might be a good idea here to make sure the offset lands
+ * in some "allowed" area to protect things like the PCIE GART...
+ */
+
+ /* First, the best case, the offset already lands in either the
+ * framebuffer or the GART mapped space
+ */
+ if ((off >= dev_priv->fb_location &&
+ off < (dev_priv->fb_location + dev_priv->fb_size)) ||
+ (off >= dev_priv->gart_vm_start &&
+ off < (dev_priv->gart_vm_start + dev_priv->gart_size)))
return 0;
- radeon_priv = filp_priv->driver_priv;
- off += radeon_priv->radeon_fb_delta;
+ /* Ok, that didn't happen... now check if we have a zero based
+ * offset that fits in the framebuffer + gart space, apply the
+ * magic offset we get from SETPARAM or calculated from fb_location
+ */
+ if (off < (dev_priv->fb_size + dev_priv->gart_size)) {
+ radeon_priv = filp_priv->driver_priv;
+ off += radeon_priv->radeon_fb_delta;
+ }
- DRM_DEBUG("offset fixed up to 0x%x\n", off);
+ /* Finally, assume we aimed at a GART offset if beyond the fb */
+ if (off > (dev_priv->fb_location + dev_priv->fb_size))
+ off = off - (dev_priv->fb_location + dev_priv->fb_size) +
+ dev_priv->gart_vm_start;
- if (off < dev_priv->fb_location ||
- off >= (dev_priv->gart_vm_start + dev_priv->gart_size))
- return DRM_ERR(EINVAL);
-
- *offset = off;
-
- return 0;
+ /* Now recheck and fail if out of bounds */
+ if ((off >= dev_priv->fb_location &&
+ off < (dev_priv->fb_location + dev_priv->fb_size)) ||
+ (off >= dev_priv->gart_vm_start &&
+ off < (dev_priv->gart_vm_start + dev_priv->gart_size))) {
+ DRM_DEBUG("offset fixed up to 0x%x\n", off);
+ *offset = off;
+ return 0;
+ }
+ return DRM_ERR(EINVAL);
}
static __inline__ int radeon_check_and_fixup_packets(drm_radeon_private_t *
@@ -1939,11 +1970,6 @@
drm_radeon_private_t *dev_priv = dev->dev_private;
drm_radeon_surface_alloc_t alloc;
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_COPY_FROM_USER_IOCTL(alloc,
(drm_radeon_surface_alloc_t __user *) data,
sizeof(alloc));
@@ -1960,12 +1986,7 @@
drm_radeon_private_t *dev_priv = dev->dev_private;
drm_radeon_surface_free_t memfree;
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
- DRM_COPY_FROM_USER_IOCTL(memfree, (drm_radeon_mem_free_t __user *) data,
+ DRM_COPY_FROM_USER_IOCTL(memfree, (drm_radeon_surface_free_t __user *) data,
sizeof(memfree));
if (free_surface(filp, dev_priv, memfree.address))
@@ -2100,11 +2121,6 @@
LOCK_TEST_WITH_RETURN(dev, filp);
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_GET_PRIV_WITH_RETURN(filp_priv, filp);
DRM_COPY_FROM_USER_IOCTL(vertex, (drm_radeon_vertex_t __user *) data,
@@ -2189,11 +2205,6 @@
LOCK_TEST_WITH_RETURN(dev, filp);
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_GET_PRIV_WITH_RETURN(filp_priv, filp);
DRM_COPY_FROM_USER_IOCTL(elts, (drm_radeon_indices_t __user *) data,
@@ -2340,11 +2351,6 @@
LOCK_TEST_WITH_RETURN(dev, filp);
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_COPY_FROM_USER_IOCTL(indirect,
(drm_radeon_indirect_t __user *) data,
sizeof(indirect));
@@ -2417,11 +2423,6 @@
LOCK_TEST_WITH_RETURN(dev, filp);
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_GET_PRIV_WITH_RETURN(filp_priv, filp);
DRM_COPY_FROM_USER_IOCTL(vertex, (drm_radeon_vertex2_t __user *) data,
@@ -2738,11 +2739,6 @@
LOCK_TEST_WITH_RETURN(dev, filp);
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_GET_PRIV_WITH_RETURN(filp_priv, filp);
DRM_COPY_FROM_USER_IOCTL(cmdbuf,
@@ -2897,11 +2893,6 @@
drm_radeon_getparam_t param;
int value;
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_COPY_FROM_USER_IOCTL(param, (drm_radeon_getparam_t __user *) data,
sizeof(param));
@@ -2981,11 +2972,6 @@
drm_radeon_setparam_t sp;
struct drm_radeon_driver_file_fields *radeon_priv;
- if (!dev_priv) {
- DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
- return DRM_ERR(EINVAL);
- }
-
DRM_GET_PRIV_WITH_RETURN(filp_priv, filp);
DRM_COPY_FROM_USER_IOCTL(sp, (drm_radeon_setparam_t __user *) data,
@@ -3012,6 +2998,9 @@
case RADEON_SETPARAM_PCIGART_LOCATION:
dev_priv->pcigart_offset = sp.value;
break;
+ case RADEON_SETPARAM_NEW_MEMMAP:
+ dev_priv->new_memmap = sp.value;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", sp.param);
return DRM_ERR(EINVAL);
diff --git a/drivers/char/drm/sis_mm.c b/drivers/char/drm/sis_mm.c
index 6774d2f..5e9936b 100644
--- a/drivers/char/drm/sis_mm.c
+++ b/drivers/char/drm/sis_mm.c
@@ -110,7 +110,7 @@
DRM_COPY_TO_USER_IOCTL(argp, fb, sizeof(fb));
- DRM_DEBUG("alloc fb, size = %d, offset = %ld\n", fb.size, req.offset);
+ DRM_DEBUG("alloc fb, size = %d, offset = %d\n", fb.size, req.offset);
return retval;
}
diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c
index 1b5e01e..43ff598 100644
--- a/drivers/char/generic_nvram.c
+++ b/drivers/char/generic_nvram.c
@@ -22,6 +22,9 @@
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#endif
#define NVRAM_SIZE 8192
@@ -92,7 +95,7 @@
case IOC_NVRAM_GET_OFFSET: {
int part, offset;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -EINVAL;
if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
return -EFAULT;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index f65b2e1..2b6a56b 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -39,8 +39,10 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
+
#include <asm/uaccess.h>
-#include <asm/hvconsole.h>
+
+#include "hvc_console.h"
#define HVC_MAJOR 229
#define HVC_MINOR 0
@@ -54,17 +56,14 @@
#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */
/*
- * The Linux TTY code does not support dynamic addition of tty derived devices
- * so we need to know how many tty devices we might need when space is allocated
- * for the tty device. Since this driver supports hotplug of vty adapters we
- * need to make sure we have enough allocated.
+ * These sizes are most efficient for vio, because they are the
+ * native transfer size. We could make them selectable in the
+ * future to better deal with backends that want other buffer sizes.
*/
-#define HVC_ALLOC_TTY_ADAPTERS 8
-
#define N_OUTBUF 16
#define N_INBUF 16
-#define __ALIGNED__ __attribute__((__aligned__(8)))
+#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
static struct tty_driver *hvc_driver;
static struct task_struct *hvc_task;
@@ -154,7 +153,7 @@
void hvc_console_print(struct console *co, const char *b, unsigned count)
{
- char c[16] __ALIGNED__;
+ char c[N_OUTBUF] __ALIGNED__;
unsigned i = 0, n = 0;
int r, donecr = 0, index = co->index;
@@ -473,8 +472,10 @@
n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf);
if (n <= 0) {
- if (n == 0)
+ if (n == 0) {
+ hp->do_wakeup = 1;
return;
+ }
/* throw away output on error; this happens when
there is no session connected to the vterm. */
hp->n_outbuf = 0;
@@ -486,12 +487,19 @@
hp->do_wakeup = 1;
}
-static inline int __hvc_write_kernel(struct hvc_struct *hp,
- const unsigned char *buf, int count)
+static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
+ struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
int rsize, written = 0;
+ /* This write was probably executed during a tty close. */
+ if (!hp)
+ return -EPIPE;
+
+ if (hp->count <= 0)
+ return -EIO;
+
spin_lock_irqsave(&hp->lock, flags);
/* Push pending writes */
@@ -510,26 +518,8 @@
}
spin_unlock_irqrestore(&hp->lock, flags);
- return written;
-}
-static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- struct hvc_struct *hp = tty->driver_data;
- int written;
-
- /* This write was probably executed during a tty close. */
- if (!hp)
- return -EPIPE;
-
- if (hp->count <= 0)
- return -EIO;
-
- written = __hvc_write_kernel(hp, buf, count);
-
/*
* Racy, but harmless, kick thread if there is still pending data.
- * There really is nothing wrong with kicking the thread, even if there
- * is no buffered data.
*/
if (hp->n_outbuf)
hvc_kick();
@@ -614,6 +604,13 @@
spin_unlock_irqrestore(&hp->lock, flags);
tty_hangup(tty);
spin_lock_irqsave(&hp->lock, flags);
+ } else if ( n == -EAGAIN ) {
+ /*
+ * Some back-ends can only ensure a certain min
+ * num of bytes read, which may be > 'count'.
+ * Let the tty clear the flip buff to make room.
+ */
+ poll_mask |= HVC_POLL_READ;
}
break;
}
@@ -635,16 +632,7 @@
tty_insert_flip_char(tty, buf[i], 0);
}
- /*
- * Account for the total amount read in one loop, and if above
- * 64 bytes, we do a quick schedule loop to let the tty grok
- * the data and eventually throttle us.
- */
read_total += n;
- if (read_total >= 64) {
- poll_mask |= HVC_POLL_QUICK;
- break;
- }
}
throttled:
/* Wakeup write queue if necessary */
@@ -767,7 +755,8 @@
* see if this vterm id matches one registered for console.
*/
for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
- if (vtermnos[i] == hp->vtermno)
+ if (vtermnos[i] == hp->vtermno &&
+ cons_ops[i] == hp->ops)
break;
/* no matching slot, just use a counter */
@@ -823,34 +812,38 @@
* interfaces start to become available. */
int __init hvc_init(void)
{
+ struct tty_driver *drv;
+
/* We need more than hvc_count adapters due to hotplug additions. */
- hvc_driver = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS);
- if (!hvc_driver)
+ drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS);
+ if (!drv)
return -ENOMEM;
- hvc_driver->owner = THIS_MODULE;
- hvc_driver->devfs_name = "hvc/";
- hvc_driver->driver_name = "hvc";
- hvc_driver->name = "hvc";
- hvc_driver->major = HVC_MAJOR;
- hvc_driver->minor_start = HVC_MINOR;
- hvc_driver->type = TTY_DRIVER_TYPE_SYSTEM;
- hvc_driver->init_termios = tty_std_termios;
- hvc_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(hvc_driver, &hvc_ops);
+ drv->owner = THIS_MODULE;
+ drv->devfs_name = "hvc/";
+ drv->driver_name = "hvc";
+ drv->name = "hvc";
+ drv->major = HVC_MAJOR;
+ drv->minor_start = HVC_MINOR;
+ drv->type = TTY_DRIVER_TYPE_SYSTEM;
+ drv->init_termios = tty_std_termios;
+ drv->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(drv, &hvc_ops);
/* Always start the kthread because there can be hotplug vty adapters
* added later. */
hvc_task = kthread_run(khvcd, NULL, "khvcd");
if (IS_ERR(hvc_task)) {
panic("Couldn't create kthread for console.\n");
- put_tty_driver(hvc_driver);
+ put_tty_driver(drv);
return -EIO;
}
- if (tty_register_driver(hvc_driver))
+ if (tty_register_driver(drv))
panic("Couldn't register hvc console driver\n");
+ mb();
+ hvc_driver = drv;
return 0;
}
module_init(hvc_init);
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
new file mode 100644
index 0000000..96b7401
--- /dev/null
+++ b/drivers/char/hvc_console.h
@@ -0,0 +1,63 @@
+/*
+ * hvc_console.h
+ * Copyright (C) 2005 IBM Corporation
+ *
+ * Author(s):
+ * Ryan S. Arnold <rsa@us.ibm.com>
+ *
+ * hvc_console header information:
+ * moved here from include/asm-powerpc/hvconsole.h
+ * and drivers/char/hvc_console.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef HVC_CONSOLE_H
+#define HVC_CONSOLE_H
+
+/*
+ * This is the max number of console adapters that can/will be found as
+ * console devices on first stage console init. Any number beyond this range
+ * can't be used as a console device but is still a valid tty device.
+ */
+#define MAX_NR_HVC_CONSOLES 16
+
+/*
+ * The Linux TTY code does not support dynamic addition of tty derived devices
+ * so we need to know how many tty devices we might need when space is allocated
+ * for the tty device. Since this driver supports hotplug of vty adapters we
+ * need to make sure we have enough allocated.
+ */
+#define HVC_ALLOC_TTY_ADAPTERS 8
+
+
+/* implemented by a low level driver */
+struct hv_ops {
+ int (*get_chars)(uint32_t vtermno, char *buf, int count);
+ int (*put_chars)(uint32_t vtermno, const char *buf, int count);
+};
+
+struct hvc_struct;
+
+/* Register a vterm and a slot index for use as a console (console_init) */
+extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
+
+/* register a vterm for hvc tty operation (module_init or hotplug add) */
+extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq,
+ struct hv_ops *ops);
+/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
+extern int __devexit hvc_remove(struct hvc_struct *hp);
+
+#endif // HVC_CONSOLE_H
diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c
new file mode 100644
index 0000000..83364ea
--- /dev/null
+++ b/drivers/char/hvc_rtas.c
@@ -0,0 +1,138 @@
+/*
+ * IBM RTAS driver interface to hvc_console.c
+ *
+ * (C) Copyright IBM Corporation 2001-2005
+ * (C) Copyright Red Hat, Inc. 2005
+ *
+ * Author(s): Maximino Augilar <IBM STI Design Center>
+ * : Ryan S. Arnold <rsa@us.ibm.com>
+ * : Utz Bacher <utz.bacher@de.ibm.com>
+ * : David Woodhouse <dwmw2@infradead.org>
+ *
+ * inspired by drivers/char/hvc_console.c
+ * written by Anton Blanchard and Paul Mackerras
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/rtas.h>
+#include "hvc_console.h"
+
+#define hvc_rtas_cookie 0x67781e15
+struct hvc_struct *hvc_rtas_dev;
+
+#define RTASCONS_PUT_ATTEMPTS 16
+
+static int rtascons_put_char_token = RTAS_UNKNOWN_SERVICE;
+static int rtascons_get_char_token = RTAS_UNKNOWN_SERVICE;
+static int rtascons_put_delay = 100;
+module_param_named(put_delay, rtascons_put_delay, int, 0644);
+
+static inline int hvc_rtas_write_console(uint32_t vtermno, const char *buf, int count)
+{
+ int done;
+
+ /* if there is more than one character to be displayed, wait a bit */
+ for (done = 0; done < count; done++) {
+ int result;
+ result = rtas_call(rtascons_put_char_token, 1, 1, NULL, buf[done]);
+ if (result)
+ break;
+ }
+ /* the calling routine expects to receive the number of bytes sent */
+ return done;
+}
+
+static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ int c, err;
+
+ err = rtas_call(rtascons_get_char_token, 0, 2, &c);
+ if (err)
+ break;
+
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static struct hv_ops hvc_rtas_get_put_ops = {
+ .get_chars = hvc_rtas_read_console,
+ .put_chars = hvc_rtas_write_console,
+};
+
+static int hvc_rtas_init(void)
+{
+ struct hvc_struct *hp;
+
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ rtascons_put_char_token = rtas_token("put-term-char");
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ rtascons_get_char_token = rtas_token("get-term-char");
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ BUG_ON(hvc_rtas_dev);
+
+ /* Allocate an hvc_struct for the console device we instantiated
+ * earlier. Save off hp so that we can return it on exit */
+ hp = hvc_alloc(hvc_rtas_cookie, NO_IRQ, &hvc_rtas_get_put_ops);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+ hvc_rtas_dev = hp;
+ return 0;
+}
+module_init(hvc_rtas_init);
+
+/* This will tear down the tty portion of the driver */
+static void __exit hvc_rtas_exit(void)
+{
+ /* Really the fun isn't over until the worker thread breaks down and the
+ * tty cleans up */
+ if (hvc_rtas_dev)
+ hvc_remove(hvc_rtas_dev);
+}
+module_exit(hvc_rtas_exit);
+
+/* This will happen prior to module init. There is no tty at this time? */
+static int hvc_rtas_console_init(void)
+{
+ rtascons_put_char_token = rtas_token("put-term-char");
+ if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+ rtascons_get_char_token = rtas_token("get-term-char");
+ if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE)
+ return -EIO;
+
+ hvc_instantiate(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops );
+ add_preferred_console("hvc", 0, NULL);
+ return 0;
+}
+console_initcall(hvc_rtas_console_init);
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index f5212eb..9add81ce 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -31,10 +31,13 @@
#include <linux/types.h>
#include <linux/init.h>
+
#include <asm/hvconsole.h>
#include <asm/vio.h>
#include <asm/prom.h>
+#include "hvc_console.h"
+
char hvc_driver_name[] = "hvc_console";
static struct vio_device_id hvc_driver_table[] __devinitdata = {
@@ -48,6 +51,14 @@
unsigned long got;
int i;
+ /*
+ * Vio firmware will read up to SIZE_VIO_GET_CHARS at its own discretion
+ * so we play safe and avoid the situation where got > count which could
+ * overload the flip buffer.
+ */
+ if (count < SIZE_VIO_GET_CHARS)
+ return -EAGAIN;
+
got = hvc_get_chars(vtermno, buf, count);
/*
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index f7ac318..327b00c 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -439,7 +439,6 @@
char buf[HVCS_BUFF_LEN] __ALIGNED__;
unsigned long flags;
int got = 0;
- int i;
spin_lock_irqsave(&hvcsd->lock, flags);
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 932feed..e1c9537 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -42,7 +42,7 @@
#include <linux/slab.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/ipmi.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/compat.h>
@@ -55,7 +55,7 @@
struct file *file;
struct fasync_struct *fasync_queue;
wait_queue_head_t wait;
- struct semaphore recv_sem;
+ struct mutex recv_mutex;
int default_retries;
unsigned int default_retry_time_ms;
};
@@ -141,7 +141,7 @@
INIT_LIST_HEAD(&(priv->recv_msgs));
init_waitqueue_head(&priv->wait);
priv->fasync_queue = NULL;
- sema_init(&(priv->recv_sem), 1);
+ mutex_init(&priv->recv_mutex);
/* Use the low-level defaults. */
priv->default_retries = -1;
@@ -285,15 +285,15 @@
break;
}
- /* We claim a semaphore because we don't want two
+ /* We claim a mutex because we don't want two
users getting something from the queue at a time.
Since we have to release the spinlock before we can
copy the data to the user, it's possible another
user will grab something from the queue, too. Then
the messages might get out of order if something
fails and the message gets put back onto the
- queue. This semaphore prevents that problem. */
- down(&(priv->recv_sem));
+ queue. This mutex prevents that problem. */
+ mutex_lock(&priv->recv_mutex);
/* Grab the message off the list. */
spin_lock_irqsave(&(priv->recv_msg_lock), flags);
@@ -352,7 +352,7 @@
goto recv_putback_on_err;
}
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
ipmi_free_recv_msg(msg);
break;
@@ -362,11 +362,11 @@
spin_lock_irqsave(&(priv->recv_msg_lock), flags);
list_add(entry, &(priv->recv_msgs));
spin_unlock_irqrestore(&(priv->recv_msg_lock), flags);
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
break;
recv_err:
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
break;
}
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index da15541..2062675 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -227,7 +227,7 @@
static inline int check_obf(struct si_sm_data *kcs, unsigned char status,
long time)
{
- if (! GET_STATUS_OBF(status)) {
+ if (!GET_STATUS_OBF(status)) {
kcs->obf_timeout -= time;
if (kcs->obf_timeout < 0) {
start_error_recovery(kcs, "OBF not ready in time");
@@ -407,7 +407,7 @@
}
if (state == KCS_READ_STATE) {
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
read_next_byte(kcs);
} else {
@@ -447,7 +447,7 @@
"Not in read state for error2");
break;
}
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
clear_obf(kcs, status);
@@ -462,7 +462,7 @@
break;
}
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
clear_obf(kcs, status);
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 40eb005..0ded046 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -38,6 +38,7 @@
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/ipmi.h>
#include <linux/ipmi_smi.h>
@@ -234,7 +235,7 @@
/* The list of command receivers that are registered for commands
on this interface. */
- struct semaphore cmd_rcvrs_lock;
+ struct mutex cmd_rcvrs_mutex;
struct list_head cmd_rcvrs;
/* Events that were queues because no one was there to receive
@@ -387,10 +388,10 @@
/* Wholesale remove all the entries from the list in the
* interface and wait for RCU to know that none are in use. */
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
list_add_rcu(&list, &intf->cmd_rcvrs);
list_del_rcu(&intf->cmd_rcvrs);
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
list_for_each_entry_safe(rcvr, rcvr2, &list, link)
@@ -557,7 +558,7 @@
static void deliver_response(struct ipmi_recv_msg *msg)
{
- if (! msg->user) {
+ if (!msg->user) {
ipmi_smi_t intf = msg->user_msg_data;
unsigned long flags;
@@ -598,11 +599,11 @@
(i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
i = (i+1)%IPMI_IPMB_NUM_SEQ)
{
- if (! intf->seq_table[i].inuse)
+ if (!intf->seq_table[i].inuse)
break;
}
- if (! intf->seq_table[i].inuse) {
+ if (!intf->seq_table[i].inuse) {
intf->seq_table[i].recv_msg = recv_msg;
/* Start with the maximum timeout, when the send response
@@ -763,7 +764,7 @@
}
new_user = kmalloc(sizeof(*new_user), GFP_KERNEL);
- if (! new_user)
+ if (!new_user)
return -ENOMEM;
spin_lock_irqsave(&interfaces_lock, flags);
@@ -819,14 +820,13 @@
int ipmi_destroy_user(ipmi_user_t user)
{
- int rv = -ENODEV;
ipmi_smi_t intf = user->intf;
int i;
unsigned long flags;
struct cmd_rcvr *rcvr;
struct cmd_rcvr *rcvrs = NULL;
- user->valid = 1;
+ user->valid = 0;
/* Remove the user from the interface's sequence table. */
spin_lock_irqsave(&intf->seq_lock, flags);
@@ -847,7 +847,7 @@
* since other things may be using it till we do
* synchronize_rcu()) then free everything in that list.
*/
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
if (rcvr->user == user) {
list_del_rcu(&rcvr->link);
@@ -855,7 +855,7 @@
rcvrs = rcvr;
}
}
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
while (rcvrs) {
rcvr = rcvrs;
@@ -871,7 +871,7 @@
kref_put(&user->refcount, free_user);
- return rv;
+ return 0;
}
void ipmi_get_version(ipmi_user_t user,
@@ -936,7 +936,8 @@
if (val) {
/* Deliver any queued events. */
- list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) {
+ list_for_each_entry_safe(msg, msg2, &intf->waiting_events,
+ link) {
list_del(&msg->link);
list_add_tail(&msg->link, &msgs);
}
@@ -978,13 +979,13 @@
rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL);
- if (! rcvr)
+ if (!rcvr)
return -ENOMEM;
rcvr->cmd = cmd;
rcvr->netfn = netfn;
rcvr->user = user;
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
/* Make sure the command/netfn is not already registered. */
entry = find_cmd_rcvr(intf, netfn, cmd);
if (entry) {
@@ -995,7 +996,7 @@
list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
out_unlock:
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
if (rv)
kfree(rcvr);
@@ -1009,17 +1010,17 @@
ipmi_smi_t intf = user->intf;
struct cmd_rcvr *rcvr;
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
/* Make sure the command/netfn is not already registered. */
rcvr = find_cmd_rcvr(intf, netfn, cmd);
if ((rcvr) && (rcvr->user == user)) {
list_del_rcu(&rcvr->link);
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
kfree(rcvr);
return 0;
} else {
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
return -ENOENT;
}
}
@@ -1514,7 +1515,7 @@
unsigned char saddr, lun;
int rv;
- if (! user)
+ if (!user)
return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
@@ -1545,7 +1546,7 @@
unsigned char saddr, lun;
int rv;
- if (! user)
+ if (!user)
return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
@@ -1570,7 +1571,7 @@
char *out = (char *) page;
ipmi_smi_t intf = data;
int i;
- int rv= 0;
+ int rv = 0;
for (i = 0; i < IPMI_MAX_CHANNELS; i++)
rv += sprintf(out+rv, "%x ", intf->channels[i].address);
@@ -1989,7 +1990,7 @@
} else {
bmc->dev = platform_device_alloc("ipmi_bmc",
bmc->id.device_id);
- if (! bmc->dev) {
+ if (!bmc->dev) {
printk(KERN_ERR
"ipmi_msghandler:"
" Unable to allocate platform device\n");
@@ -2305,8 +2306,7 @@
void *send_info,
struct ipmi_device_id *device_id,
struct device *si_dev,
- unsigned char slave_addr,
- ipmi_smi_t *new_intf)
+ unsigned char slave_addr)
{
int i, j;
int rv;
@@ -2366,7 +2366,7 @@
spin_lock_init(&intf->events_lock);
INIT_LIST_HEAD(&intf->waiting_events);
intf->waiting_events_count = 0;
- init_MUTEX(&intf->cmd_rcvrs_lock);
+ mutex_init(&intf->cmd_rcvrs_mutex);
INIT_LIST_HEAD(&intf->cmd_rcvrs);
init_waitqueue_head(&intf->waitq);
@@ -2388,9 +2388,9 @@
if (rv)
goto out;
- /* FIXME - this is an ugly kludge, this sets the intf for the
- caller before sending any messages with it. */
- *new_intf = intf;
+ rv = handlers->start_processing(send_info, intf);
+ if (rv)
+ goto out;
get_guid(intf);
@@ -2622,7 +2622,7 @@
spin_unlock_irqrestore(&intf->counter_lock, flags);
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -2777,7 +2777,7 @@
spin_unlock_irqrestore(&intf->counter_lock, flags);
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -2869,13 +2869,14 @@
events. */
rcu_read_lock();
list_for_each_entry_rcu(user, &intf->users, link) {
- if (! user->gets_events)
+ if (!user->gets_events)
continue;
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
rcu_read_unlock();
- list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) {
+ list_for_each_entry_safe(recv_msg, recv_msg2, &msgs,
+ link) {
list_del(&recv_msg->link);
ipmi_free_recv_msg(recv_msg);
}
@@ -2905,7 +2906,7 @@
/* No one to receive the message, put it in queue if there's
not already too many things in the queue. */
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -3190,7 +3191,7 @@
rcu_read_lock();
list_for_each_entry_rcu(user, &intf->users, link) {
- if (! user->handler->ipmi_watchdog_pretimeout)
+ if (!user->handler->ipmi_watchdog_pretimeout)
continue;
user->handler->ipmi_watchdog_pretimeout(user->handler_data);
@@ -3278,7 +3279,7 @@
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
- if (! smi_msg)
+ if (!smi_msg)
return;
spin_unlock_irqrestore(&intf->seq_lock, *flags);
@@ -3314,8 +3315,9 @@
/* See if any waiting messages need to be processed. */
spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
- list_for_each_entry_safe(smi_msg, smi_msg2, &intf->waiting_msgs, link) {
- if (! handle_new_recv_msg(intf, smi_msg)) {
+ list_for_each_entry_safe(smi_msg, smi_msg2,
+ &intf->waiting_msgs, link) {
+ if (!handle_new_recv_msg(intf, smi_msg)) {
list_del(&smi_msg->link);
ipmi_free_smi_msg(smi_msg);
} else {
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index 786a280..d0b5c08 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -346,7 +346,7 @@
{
const char ipmi_version_major = ipmi_version & 0xF;
const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
- const char mfr[3]=DELL_IANA_MFR_ID;
+ const char mfr[3] = DELL_IANA_MFR_ID;
if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
ipmi_version_major <= 1 &&
ipmi_version_minor < 5)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 35fbd4d..a86c0f2 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -803,7 +803,7 @@
set_user_nice(current, 19);
while (!kthread_should_stop()) {
spin_lock_irqsave(&(smi_info->si_lock), flags);
- smi_result=smi_event_handler(smi_info, 0);
+ smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
/* do nothing */
@@ -972,10 +972,37 @@
return si_irq_handler(irq, data, regs);
}
+static int smi_start_processing(void *send_info,
+ ipmi_smi_t intf)
+{
+ struct smi_info *new_smi = send_info;
+
+ new_smi->intf = intf;
+
+ /* Set up the timer that drives the interface. */
+ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
+ new_smi->last_timeout_jiffies = jiffies;
+ mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (new_smi->si_type != SI_BT) {
+ new_smi->thread = kthread_run(ipmi_thread, new_smi,
+ "kipmi%d", new_smi->intf_num);
+ if (IS_ERR(new_smi->thread)) {
+ printk(KERN_NOTICE "ipmi_si_intf: Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
+ PTR_ERR(new_smi->thread));
+ new_smi->thread = NULL;
+ }
+ }
+
+ return 0;
+}
static struct ipmi_smi_handlers handlers =
{
.owner = THIS_MODULE,
+ .start_processing = smi_start_processing,
.sender = sender,
.request_events = request_events,
.set_run_to_completion = set_run_to_completion,
@@ -987,7 +1014,7 @@
#define SI_MAX_PARMS 4
static LIST_HEAD(smi_infos);
-static DECLARE_MUTEX(smi_infos_lock);
+static DEFINE_MUTEX(smi_infos_lock);
static int smi_num; /* Used to sequence the SMIs */
#define DEFAULT_REGSPACING 1
@@ -2162,9 +2189,13 @@
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
- if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
- kthread_stop(smi_info->thread);
- del_timer_sync(&smi_info->si_timer);
+ if (smi_info->intf) {
+ /* The timer and thread are only running if the
+ interface has been started up and registered. */
+ if (smi_info->thread != NULL)
+ kthread_stop(smi_info->thread);
+ del_timer_sync(&smi_info->si_timer);
+ }
}
static struct ipmi_default_vals
@@ -2245,7 +2276,7 @@
new_smi->slave_addr, new_smi->irq);
}
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
printk(KERN_WARNING "ipmi_si: duplicate interface\n");
rv = -EBUSY;
@@ -2341,21 +2372,6 @@
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
- /* The ipmi_register_smi() code does some operations to
- determine the channel information, so we must be ready to
- handle operations before it is called. This means we have
- to stop the timer if we get an error after this point. */
- init_timer(&(new_smi->si_timer));
- new_smi->si_timer.data = (long) new_smi;
- new_smi->si_timer.function = smi_timeout;
- new_smi->last_timeout_jiffies = jiffies;
- new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
-
- add_timer(&(new_smi->si_timer));
- if (new_smi->si_type != SI_BT)
- new_smi->thread = kthread_run(ipmi_thread, new_smi,
- "kipmi%d", new_smi->intf_num);
-
if (!new_smi->dev) {
/* If we don't already have a device from something
* else (like PCI), then register a new one. */
@@ -2365,7 +2381,7 @@
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
- goto out_err_stop_timer;
+ goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
new_smi->dev->driver = &ipmi_driver;
@@ -2377,7 +2393,7 @@
" Unable to register system interface device:"
" %d\n",
rv);
- goto out_err_stop_timer;
+ goto out_err;
}
new_smi->dev_registered = 1;
}
@@ -2386,8 +2402,7 @@
new_smi,
&new_smi->device_id,
new_smi->dev,
- new_smi->slave_addr,
- &(new_smi->intf));
+ new_smi->slave_addr);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to register device: error %d\n",
@@ -2417,7 +2432,7 @@
list_add_tail(&new_smi->link, &smi_infos);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
printk(" IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
@@ -2454,7 +2469,7 @@
kfree(new_smi);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
return rv;
}
@@ -2512,26 +2527,26 @@
#endif
if (si_trydefaults) {
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
/* No BMC was found, try defaults. */
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
default_find_bmc();
} else {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
}
}
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
printk("ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
return 0;
}
}
@@ -2607,10 +2622,10 @@
pci_unregister_driver(&ipmi_pci_driver);
#endif
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
cleanup_one_si(e);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
driver_unregister(&ipmi_driver);
}
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 7ece9f3..2d11ddd 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -39,6 +39,7 @@
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
+#include <linux/completion.h>
#include <linux/rwsem.h>
#include <linux/errno.h>
#include <asm/uaccess.h>
@@ -303,21 +304,22 @@
static void panic_halt_ipmi_heartbeat(void);
-/* We use a semaphore to make sure that only one thing can send a set
+/* We use a mutex to make sure that only one thing can send a set
timeout at one time, because we only have one copy of the data.
- The semaphore is claimed when the set_timeout is sent and freed
+ The mutex is claimed when the set_timeout is sent and freed
when both messages are free. */
static atomic_t set_timeout_tofree = ATOMIC_INIT(0);
-static DECLARE_MUTEX(set_timeout_lock);
+static DEFINE_MUTEX(set_timeout_lock);
+static DECLARE_COMPLETION(set_timeout_wait);
static void set_timeout_free_smi(struct ipmi_smi_msg *msg)
{
if (atomic_dec_and_test(&set_timeout_tofree))
- up(&set_timeout_lock);
+ complete(&set_timeout_wait);
}
static void set_timeout_free_recv(struct ipmi_recv_msg *msg)
{
if (atomic_dec_and_test(&set_timeout_tofree))
- up(&set_timeout_lock);
+ complete(&set_timeout_wait);
}
static struct ipmi_smi_msg set_timeout_smi_msg =
{
@@ -399,7 +401,7 @@
/* We can only send one of these at a time. */
- down(&set_timeout_lock);
+ mutex_lock(&set_timeout_lock);
atomic_set(&set_timeout_tofree, 2);
@@ -407,16 +409,21 @@
&set_timeout_recv_msg,
&send_heartbeat_now);
if (rv) {
- up(&set_timeout_lock);
- } else {
- if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
- || ((send_heartbeat_now)
- && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
- {
- rv = ipmi_heartbeat();
- }
+ mutex_unlock(&set_timeout_lock);
+ goto out;
}
+ wait_for_completion(&set_timeout_wait);
+
+ if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
+ || ((send_heartbeat_now)
+ && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
+ {
+ rv = ipmi_heartbeat();
+ }
+ mutex_unlock(&set_timeout_lock);
+
+out:
return rv;
}
@@ -458,17 +465,17 @@
The semaphore is claimed when the set_timeout is sent and freed
when both messages are free. */
static atomic_t heartbeat_tofree = ATOMIC_INIT(0);
-static DECLARE_MUTEX(heartbeat_lock);
-static DECLARE_MUTEX_LOCKED(heartbeat_wait_lock);
+static DEFINE_MUTEX(heartbeat_lock);
+static DECLARE_COMPLETION(heartbeat_wait);
static void heartbeat_free_smi(struct ipmi_smi_msg *msg)
{
if (atomic_dec_and_test(&heartbeat_tofree))
- up(&heartbeat_wait_lock);
+ complete(&heartbeat_wait);
}
static void heartbeat_free_recv(struct ipmi_recv_msg *msg)
{
if (atomic_dec_and_test(&heartbeat_tofree))
- up(&heartbeat_wait_lock);
+ complete(&heartbeat_wait);
}
static struct ipmi_smi_msg heartbeat_smi_msg =
{
@@ -511,14 +518,14 @@
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
}
- down(&heartbeat_lock);
+ mutex_lock(&heartbeat_lock);
atomic_set(&heartbeat_tofree, 2);
/* Don't reset the timer if we have the timer turned off, that
re-enables the watchdog. */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) {
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
return 0;
}
@@ -539,14 +546,14 @@
&heartbeat_recv_msg,
1);
if (rv) {
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
printk(KERN_WARNING PFX "heartbeat failure: %d\n",
rv);
return rv;
}
/* Wait for the heartbeat to be sent. */
- down(&heartbeat_wait_lock);
+ wait_for_completion(&heartbeat_wait);
if (heartbeat_recv_msg.msg.data[0] != 0) {
/* Got an error in the heartbeat response. It was already
@@ -555,7 +562,7 @@
rv = -EINVAL;
}
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
return rv;
}
@@ -589,7 +596,7 @@
1);
}
-static struct watchdog_info ident=
+static struct watchdog_info ident =
{
.options = 0, /* WDIOF_SETTIMEOUT, */
.firmware_version = 1,
@@ -790,13 +797,13 @@
static int ipmi_close(struct inode *ino, struct file *filep)
{
- if (iminor(ino)==WATCHDOG_MINOR)
- {
+ if (iminor(ino) == WATCHDOG_MINOR) {
if (expect_close == 42) {
ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
} else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
ipmi_heartbeat();
}
clear_bit(0, &ipmi_wdog_open);
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index e5247f8..ef20c1f 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -706,7 +706,6 @@
static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
static int stli_getportstruct(stliport_t __user *arg);
static int stli_getbrdstruct(stlibrd_t __user *arg);
-static void *stli_memalloc(int len);
static stlibrd_t *stli_allocbrd(void);
static void stli_ecpinit(stlibrd_t *brdp);
@@ -997,17 +996,6 @@
/*****************************************************************************/
-/*
- * Local driver kernel malloc routine.
- */
-
-static void *stli_memalloc(int len)
-{
- return((void *) kmalloc(len, GFP_KERNEL));
-}
-
-/*****************************************************************************/
-
static int stli_open(struct tty_struct *tty, struct file *filp)
{
stlibrd_t *brdp;
@@ -3227,13 +3215,12 @@
#endif
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = (stliport_t *) stli_memalloc(sizeof(stliport_t));
- if (portp == (stliport_t *) NULL) {
+ portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
}
- memset(portp, 0, sizeof(stliport_t));
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
@@ -4610,14 +4597,13 @@
{
stlibrd_t *brdp;
- brdp = (stlibrd_t *) stli_memalloc(sizeof(stlibrd_t));
- if (brdp == (stlibrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlibrd_t));
- return((stlibrd_t *) NULL);
+ return NULL;
}
- memset(brdp, 0, sizeof(stlibrd_t));
brdp->magic = STLI_BOARDMAGIC;
return(brdp);
}
@@ -5210,12 +5196,12 @@
/*
* Allocate a temporary write buffer.
*/
- stli_tmpwritebuf = (char *) stli_memalloc(STLI_TXBUFSIZE);
- if (stli_tmpwritebuf == (char *) NULL)
+ stli_tmpwritebuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_tmpwritebuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
- stli_txcookbuf = stli_memalloc(STLI_TXBUFSIZE);
- if (stli_txcookbuf == (char *) NULL)
+ stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_txcookbuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 3f5d607..a9c5a72 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -504,7 +504,6 @@
static int stl_echpciintr(stlbrd_t *brdp);
static int stl_echpci64intr(stlbrd_t *brdp);
static void stl_offintr(void *private);
-static void *stl_memalloc(int len);
static stlbrd_t *stl_allocbrd(void);
static stlport_t *stl_getport(int brdnr, int panelnr, int portnr);
@@ -940,17 +939,6 @@
/*****************************************************************************/
/*
- * Local driver kernel memory allocation routine.
- */
-
-static void *stl_memalloc(int len)
-{
- return (void *) kmalloc(len, GFP_KERNEL);
-}
-
-/*****************************************************************************/
-
-/*
* Allocate a new board structure. Fill out the basic info in it.
*/
@@ -958,14 +946,13 @@
{
stlbrd_t *brdp;
- brdp = (stlbrd_t *) stl_memalloc(sizeof(stlbrd_t));
- if (brdp == (stlbrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
+ if (!brdp) {
printk("STALLION: failed to allocate memory (size=%d)\n",
sizeof(stlbrd_t));
- return (stlbrd_t *) NULL;
+ return NULL;
}
- memset(brdp, 0, sizeof(stlbrd_t));
brdp->magic = STL_BOARDMAGIC;
return brdp;
}
@@ -1017,9 +1004,9 @@
portp->refcount++;
if ((portp->flags & ASYNC_INITIALIZED) == 0) {
- if (portp->tx.buf == (char *) NULL) {
- portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE);
- if (portp->tx.buf == (char *) NULL)
+ if (!portp->tx.buf) {
+ portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
+ if (!portp->tx.buf)
return -ENOMEM;
portp->tx.head = portp->tx.buf;
portp->tx.tail = portp->tx.buf;
@@ -2178,13 +2165,12 @@
* each ports data structures.
*/
for (i = 0; (i < panelp->nrports); i++) {
- portp = (stlport_t *) stl_memalloc(sizeof(stlport_t));
- if (portp == (stlport_t *) NULL) {
+ portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlport_t));
break;
}
- memset(portp, 0, sizeof(stlport_t));
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
@@ -2315,13 +2301,12 @@
* can complete the setup.
*/
- panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
- if (panelp == (stlpanel_t *) NULL) {
+ panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ if (!panelp) {
printk(KERN_WARNING "STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlpanel_t));
- return(-ENOMEM);
+ return -ENOMEM;
}
- memset(panelp, 0, sizeof(stlpanel_t));
panelp->magic = STL_PANELMAGIC;
panelp->brdnr = brdp->brdnr;
@@ -2490,13 +2475,12 @@
status = inb(ioaddr + ECH_PNLSTATUS);
if ((status & ECH_PNLIDMASK) != nxtid)
break;
- panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
- if (panelp == (stlpanel_t *) NULL) {
+ panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ if (!panelp) {
printk("STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlpanel_t));
break;
}
- memset(panelp, 0, sizeof(stlpanel_t));
panelp->magic = STL_PANELMAGIC;
panelp->brdnr = brdp->brdnr;
panelp->panelnr = panelnr;
@@ -3074,8 +3058,8 @@
/*
* Allocate a temporary write buffer.
*/
- stl_tmpwritebuf = (char *) stl_memalloc(STL_TXBUFSIZE);
- if (stl_tmpwritebuf == (char *) NULL)
+ stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
+ if (!stl_tmpwritebuf)
printk("STALLION: failed to allocate memory (size=%d)\n",
STL_TXBUFSIZE);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 0bfd1b6..98b126c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -376,7 +376,7 @@
return copied;
}
-EXPORT_SYMBOL_GPL(tty_insert_flip_string);
+EXPORT_SYMBOL(tty_insert_flip_string);
int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size)
{
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index ca4844c..acc5d47 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2328,6 +2328,10 @@
case TIOCL_SETVESABLANK:
set_vesa_blanking(p);
break;
+ case TIOCL_GETKMSGREDIRECT:
+ data = kmsg_redirect;
+ ret = __put_user(data, p);
+ break;
case TIOCL_SETKMSGREDIRECT:
if (!capable(CAP_SYS_ADMIN)) {
ret = -EPERM;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index b582d0c..4f08984 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -71,7 +71,7 @@
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320)"
- depends on EDAC_MM_EDAC && PCI && X86
+ depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index ccf528d..a5017de 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -61,6 +61,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/leds.h>
#define _IDE_DISK
@@ -317,6 +318,8 @@
return ide_stopped;
}
+ ledtrig_ide_activity();
+
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
(unsigned long long)block, rq->nr_sectors,
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0606bd2..9233b81 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -375,7 +375,13 @@
}
}
- ide_end_request(drive, 1, rq->hard_nr_sectors);
+ if (rq->rq_disk) {
+ ide_driver_t *drv;
+
+ drv = *(ide_driver_t **)rq->rq_disk->private_data;;
+ drv->end_request(drive, 1, rq->hard_nr_sectors);
+ } else
+ ide_end_request(drive, 1, rq->hard_nr_sectors);
}
/*
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index c85b87c..3e677c4 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -440,7 +440,7 @@
#if defined(CONFIG_PPC_CHRP) && defined(CONFIG_PPC32)
- if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) {
+ if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
hwif->irq = hwif->channel ? 15 : 14;
}
#endif
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 5013b12..78e30f8 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1677,7 +1677,7 @@
void __init
pmac_ide_probe(void)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index a86beeb..1922287 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3529,7 +3529,7 @@
static int ohci1394_pci_resume (struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Re-enable 1394 */
@@ -3548,7 +3548,7 @@
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Disable 1394 */
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index f7854b6..ba54c85 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -227,6 +227,14 @@
if (!is_vendor_oui(mad_reg_req->oui))
goto error1;
}
+ /* Make sure class supplied is consistent with RMPP */
+ if (ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
+ if (!rmpp_version)
+ goto error1;
+ } else {
+ if (rmpp_version)
+ goto error1;
+ }
/* Make sure class supplied is consistent with QP type */
if (qp_type == IB_QPT_SMI) {
if ((mad_reg_req->mgmt_class !=
@@ -890,6 +898,35 @@
}
EXPORT_SYMBOL(ib_create_send_mad);
+int ib_get_mad_data_offset(u8 mgmt_class)
+{
+ if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM)
+ return IB_MGMT_SA_HDR;
+ else if ((mgmt_class == IB_MGMT_CLASS_DEVICE_MGMT) ||
+ (mgmt_class == IB_MGMT_CLASS_DEVICE_ADM) ||
+ (mgmt_class == IB_MGMT_CLASS_BIS))
+ return IB_MGMT_DEVICE_HDR;
+ else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
+ (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END))
+ return IB_MGMT_VENDOR_HDR;
+ else
+ return IB_MGMT_MAD_HDR;
+}
+EXPORT_SYMBOL(ib_get_mad_data_offset);
+
+int ib_is_mad_class_rmpp(u8 mgmt_class)
+{
+ if ((mgmt_class == IB_MGMT_CLASS_SUBN_ADM) ||
+ (mgmt_class == IB_MGMT_CLASS_DEVICE_MGMT) ||
+ (mgmt_class == IB_MGMT_CLASS_DEVICE_ADM) ||
+ (mgmt_class == IB_MGMT_CLASS_BIS) ||
+ ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
+ (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)))
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(ib_is_mad_class_rmpp);
+
void *ib_get_rmpp_segment(struct ib_mad_send_buf *send_buf, int seg_num)
{
struct ib_mad_send_wr_private *mad_send_wr;
@@ -1022,6 +1059,13 @@
goto error;
}
+ if (!ib_is_mad_class_rmpp(((struct ib_mad_hdr *) send_buf->mad)->mgmt_class)) {
+ if (mad_agent_priv->agent.rmpp_version) {
+ ret = -EINVAL;
+ goto error;
+ }
+ }
+
/*
* Save pointer to next work request to post in case the
* current one completes, and the user modifies the work
@@ -1618,14 +1662,59 @@
(rmpp_mad->rmpp_hdr.rmpp_type == IB_MGMT_RMPP_TYPE_DATA);
}
+static inline int rcv_has_same_class(struct ib_mad_send_wr_private *wr,
+ struct ib_mad_recv_wc *rwc)
+{
+ return ((struct ib_mad *)(wr->send_buf.mad))->mad_hdr.mgmt_class ==
+ rwc->recv_buf.mad->mad_hdr.mgmt_class;
+}
+
+static inline int rcv_has_same_gid(struct ib_mad_send_wr_private *wr,
+ struct ib_mad_recv_wc *rwc )
+{
+ struct ib_ah_attr attr;
+ u8 send_resp, rcv_resp;
+
+ send_resp = ((struct ib_mad *)(wr->send_buf.mad))->
+ mad_hdr.method & IB_MGMT_METHOD_RESP;
+ rcv_resp = rwc->recv_buf.mad->mad_hdr.method & IB_MGMT_METHOD_RESP;
+
+ if (!send_resp && rcv_resp)
+ /* is request/response. GID/LIDs are both local (same). */
+ return 1;
+
+ if (send_resp == rcv_resp)
+ /* both requests, or both responses. GIDs different */
+ return 0;
+
+ if (ib_query_ah(wr->send_buf.ah, &attr))
+ /* Assume not equal, to avoid false positives. */
+ return 0;
+
+ if (!(attr.ah_flags & IB_AH_GRH) && !(rwc->wc->wc_flags & IB_WC_GRH))
+ return attr.dlid == rwc->wc->slid;
+ else if ((attr.ah_flags & IB_AH_GRH) &&
+ (rwc->wc->wc_flags & IB_WC_GRH))
+ return memcmp(attr.grh.dgid.raw,
+ rwc->recv_buf.grh->sgid.raw, 16) == 0;
+ else
+ /* one has GID, other does not. Assume different */
+ return 0;
+}
struct ib_mad_send_wr_private*
-ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid)
+ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv,
+ struct ib_mad_recv_wc *mad_recv_wc)
{
struct ib_mad_send_wr_private *mad_send_wr;
+ struct ib_mad *mad;
+
+ mad = (struct ib_mad *)mad_recv_wc->recv_buf.mad;
list_for_each_entry(mad_send_wr, &mad_agent_priv->wait_list,
agent_list) {
- if (mad_send_wr->tid == tid)
+ if ((mad_send_wr->tid == mad->mad_hdr.tid) &&
+ rcv_has_same_class(mad_send_wr, mad_recv_wc) &&
+ rcv_has_same_gid(mad_send_wr, mad_recv_wc))
return mad_send_wr;
}
@@ -1636,7 +1725,10 @@
list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list,
agent_list) {
if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) &&
- mad_send_wr->tid == tid && mad_send_wr->timeout) {
+ mad_send_wr->tid == mad->mad_hdr.tid &&
+ mad_send_wr->timeout &&
+ rcv_has_same_class(mad_send_wr, mad_recv_wc) &&
+ rcv_has_same_gid(mad_send_wr, mad_recv_wc)) {
/* Verify request has not been canceled */
return (mad_send_wr->status == IB_WC_SUCCESS) ?
mad_send_wr : NULL;
@@ -1661,7 +1753,6 @@
struct ib_mad_send_wr_private *mad_send_wr;
struct ib_mad_send_wc mad_send_wc;
unsigned long flags;
- __be64 tid;
INIT_LIST_HEAD(&mad_recv_wc->rmpp_list);
list_add(&mad_recv_wc->recv_buf.list, &mad_recv_wc->rmpp_list);
@@ -1677,9 +1768,8 @@
/* Complete corresponding request */
if (response_mad(mad_recv_wc->recv_buf.mad)) {
- tid = mad_recv_wc->recv_buf.mad->mad_hdr.tid;
spin_lock_irqsave(&mad_agent_priv->lock, flags);
- mad_send_wr = ib_find_send_mad(mad_agent_priv, tid);
+ mad_send_wr = ib_find_send_mad(mad_agent_priv, mad_recv_wc);
if (!mad_send_wr) {
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
ib_free_recv_mad(mad_recv_wc);
@@ -2408,11 +2498,11 @@
}
}
sg_list.addr = dma_map_single(qp_info->port_priv->
- device->dma_device,
- &mad_priv->grh,
- sizeof *mad_priv -
- sizeof mad_priv->header,
- DMA_FROM_DEVICE);
+ device->dma_device,
+ &mad_priv->grh,
+ sizeof *mad_priv -
+ sizeof mad_priv->header,
+ DMA_FROM_DEVICE);
pci_unmap_addr_set(&mad_priv->header, mapping, sg_list.addr);
recv_wr.wr_id = (unsigned long)&mad_priv->header.mad_list;
mad_priv->header.mad_list.mad_queue = recv_queue;
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index a7125d4..6c9c133 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -216,7 +216,8 @@
int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr);
struct ib_mad_send_wr_private *
-ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid);
+ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv,
+ struct ib_mad_recv_wc *mad_recv_wc);
void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr,
struct ib_mad_send_wc *mad_send_wc);
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index bacfdd5..dfd4e58 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2005 Intel Inc. All rights reserved.
- * Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ * Copyright (c) 2005-2006 Voltaire, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -100,17 +100,6 @@
}
}
-static int data_offset(u8 mgmt_class)
-{
- if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM)
- return IB_MGMT_SA_HDR;
- else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
- (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END))
- return IB_MGMT_VENDOR_HDR;
- else
- return IB_MGMT_RMPP_HDR;
-}
-
static void format_ack(struct ib_mad_send_buf *msg,
struct ib_rmpp_mad *data,
struct mad_rmpp_recv *rmpp_recv)
@@ -137,7 +126,7 @@
struct ib_mad_send_buf *msg;
int ret, hdr_len;
- hdr_len = data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
+ hdr_len = ib_get_mad_data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp,
recv_wc->wc->pkey_index, 1, hdr_len,
0, GFP_KERNEL);
@@ -163,7 +152,7 @@
if (IS_ERR(ah))
return (void *) ah;
- hdr_len = data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
+ hdr_len = ib_get_mad_data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
msg = ib_create_send_mad(agent, recv_wc->wc->src_qp,
recv_wc->wc->pkey_index, 1,
hdr_len, 0, GFP_KERNEL);
@@ -408,7 +397,7 @@
rmpp_mad = (struct ib_rmpp_mad *)rmpp_recv->cur_seg_buf->mad;
- hdr_size = data_offset(rmpp_mad->mad_hdr.mgmt_class);
+ hdr_size = ib_get_mad_data_offset(rmpp_mad->mad_hdr.mgmt_class);
data_size = sizeof(struct ib_rmpp_mad) - hdr_size;
pad = IB_MGMT_RMPP_DATA - be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin);
if (pad > IB_MGMT_RMPP_DATA || pad < 0)
@@ -562,15 +551,15 @@
return ib_send_mad(mad_send_wr);
}
-static void abort_send(struct ib_mad_agent_private *agent, __be64 tid,
- u8 rmpp_status)
+static void abort_send(struct ib_mad_agent_private *agent,
+ struct ib_mad_recv_wc *mad_recv_wc, u8 rmpp_status)
{
struct ib_mad_send_wr_private *mad_send_wr;
struct ib_mad_send_wc wc;
unsigned long flags;
spin_lock_irqsave(&agent->lock, flags);
- mad_send_wr = ib_find_send_mad(agent, tid);
+ mad_send_wr = ib_find_send_mad(agent, mad_recv_wc);
if (!mad_send_wr)
goto out; /* Unmatched send */
@@ -612,8 +601,7 @@
rmpp_mad = (struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad;
if (rmpp_mad->rmpp_hdr.rmpp_status) {
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_BAD_STATUS);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
return;
}
@@ -621,14 +609,13 @@
seg_num = be32_to_cpu(rmpp_mad->rmpp_hdr.seg_num);
newwin = be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin);
if (newwin < seg_num) {
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_W2S);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_W2S);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_W2S);
return;
}
spin_lock_irqsave(&agent->lock, flags);
- mad_send_wr = ib_find_send_mad(agent, rmpp_mad->mad_hdr.tid);
+ mad_send_wr = ib_find_send_mad(agent, mad_recv_wc);
if (!mad_send_wr)
goto out; /* Unmatched ACK */
@@ -639,8 +626,7 @@
if (seg_num > mad_send_wr->send_buf.seg_count ||
seg_num > mad_send_wr->newwin) {
spin_unlock_irqrestore(&agent->lock, flags);
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_S2B);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_S2B);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_S2B);
return;
}
@@ -728,12 +714,10 @@
rmpp_mad = (struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad;
if (rmpp_mad->rmpp_hdr.rmpp_status != IB_MGMT_RMPP_STATUS_RESX) {
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_BAD_STATUS);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
} else
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- rmpp_mad->rmpp_hdr.rmpp_status);
+ abort_send(agent, mad_recv_wc, rmpp_mad->rmpp_hdr.rmpp_status);
}
static void process_rmpp_abort(struct ib_mad_agent_private *agent,
@@ -745,12 +729,10 @@
if (rmpp_mad->rmpp_hdr.rmpp_status < IB_MGMT_RMPP_STATUS_ABORT_MIN ||
rmpp_mad->rmpp_hdr.rmpp_status > IB_MGMT_RMPP_STATUS_ABORT_MAX) {
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_BAD_STATUS);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS);
} else
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- rmpp_mad->rmpp_hdr.rmpp_status);
+ abort_send(agent, mad_recv_wc, rmpp_mad->rmpp_hdr.rmpp_status);
}
struct ib_mad_recv_wc *
@@ -764,8 +746,7 @@
return mad_recv_wc;
if (rmpp_mad->rmpp_hdr.rmpp_version != IB_MGMT_RMPP_VERSION) {
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_UNV);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_UNV);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_UNV);
goto out;
}
@@ -783,8 +764,7 @@
process_rmpp_abort(agent, mad_recv_wc);
break;
default:
- abort_send(agent, rmpp_mad->mad_hdr.tid,
- IB_MGMT_RMPP_STATUS_BADT);
+ abort_send(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BADT);
nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BADT);
break;
}
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index fb6cd42..afe70a5 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -177,17 +177,6 @@
return ret;
}
-static int data_offset(u8 mgmt_class)
-{
- if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM)
- return IB_MGMT_SA_HDR;
- else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
- (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END))
- return IB_MGMT_VENDOR_HDR;
- else
- return IB_MGMT_RMPP_HDR;
-}
-
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *send_wc)
{
@@ -283,7 +272,7 @@
*/
return -ENOSPC;
}
- offset = data_offset(recv_buf->mad->mad_hdr.mgmt_class);
+ offset = ib_get_mad_data_offset(recv_buf->mad->mad_hdr.mgmt_class);
max_seg_payload = sizeof (struct ib_mad) - offset;
for (left = packet->length - seg_payload, buf += seg_payload;
@@ -441,21 +430,14 @@
}
rmpp_mad = (struct ib_rmpp_mad *) packet->mad.data;
- if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) {
- hdr_len = IB_MGMT_SA_HDR;
- copy_offset = IB_MGMT_RMPP_HDR;
- rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
- IB_MGMT_RMPP_FLAG_ACTIVE;
- } else if (rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START &&
- rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END) {
- hdr_len = IB_MGMT_VENDOR_HDR;
- copy_offset = IB_MGMT_RMPP_HDR;
- rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
- IB_MGMT_RMPP_FLAG_ACTIVE;
- } else {
- hdr_len = IB_MGMT_MAD_HDR;
+ hdr_len = ib_get_mad_data_offset(rmpp_mad->mad_hdr.mgmt_class);
+ if (!ib_is_mad_class_rmpp(rmpp_mad->mad_hdr.mgmt_class)) {
copy_offset = IB_MGMT_MAD_HDR;
rmpp_active = 0;
+ } else {
+ copy_offset = IB_MGMT_RMPP_HDR;
+ rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
+ IB_MGMT_RMPP_FLAG_ACTIVE;
}
data_len = count - sizeof (struct ib_user_mad) - hdr_len;
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index f023d39..bc5bdcb 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -265,7 +265,7 @@
return -ENOMEM;
}
-void __devexit mthca_cleanup_av_table(struct mthca_dev *dev)
+void mthca_cleanup_av_table(struct mthca_dev *dev)
{
if (mthca_is_memfree(dev))
return;
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 76aabc5..312cf90 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -973,7 +973,7 @@
return err;
}
-void __devexit mthca_cleanup_cq_table(struct mthca_dev *dev)
+void mthca_cleanup_cq_table(struct mthca_dev *dev)
{
mthca_array_cleanup(&dev->cq_table.cq, dev->limits.num_cqs);
mthca_alloc_cleanup(&dev->cq_table.alloc);
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index cbdc348..99f109c 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -765,7 +765,7 @@
}
-static void __devexit mthca_unmap_eq_regs(struct mthca_dev *dev)
+static void mthca_unmap_eq_regs(struct mthca_dev *dev)
{
if (mthca_is_memfree(dev)) {
mthca_unmap_reg(dev, (pci_resource_len(dev->pdev, 0) - 1) &
@@ -821,7 +821,7 @@
return ret;
}
-void __devexit mthca_unmap_eq_icm(struct mthca_dev *dev)
+void mthca_unmap_eq_icm(struct mthca_dev *dev)
{
u8 status;
@@ -954,7 +954,7 @@
return err;
}
-void __devexit mthca_cleanup_eq_table(struct mthca_dev *dev)
+void mthca_cleanup_eq_table(struct mthca_dev *dev)
{
u8 status;
int i;
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index 4ace6a3..dfb482e 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -271,7 +271,7 @@
return PTR_ERR(agent);
}
-void mthca_free_agents(struct mthca_dev *dev)
+void __devexit mthca_free_agents(struct mthca_dev *dev)
{
struct ib_mad_agent *agent;
int p, q;
diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c
index 9965bda..47ca8a9 100644
--- a/drivers/infiniband/hw/mthca/mthca_mcg.c
+++ b/drivers/infiniband/hw/mthca/mthca_mcg.c
@@ -388,7 +388,7 @@
return 0;
}
-void __devexit mthca_cleanup_mcg_table(struct mthca_dev *dev)
+void mthca_cleanup_mcg_table(struct mthca_dev *dev)
{
mthca_alloc_cleanup(&dev->mcg_table.alloc);
}
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 698b621..25e1c1d 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -170,7 +170,7 @@
return -ENOMEM;
}
-static void __devexit mthca_buddy_cleanup(struct mthca_buddy *buddy)
+static void mthca_buddy_cleanup(struct mthca_buddy *buddy)
{
int i;
@@ -866,7 +866,7 @@
return err;
}
-void __devexit mthca_cleanup_mr_table(struct mthca_dev *dev)
+void mthca_cleanup_mr_table(struct mthca_dev *dev)
{
/* XXX check if any MRs are still allocated? */
if (dev->limits.fmr_reserved_mtts)
diff --git a/drivers/infiniband/hw/mthca/mthca_pd.c b/drivers/infiniband/hw/mthca/mthca_pd.c
index 105fc5f..59df516 100644
--- a/drivers/infiniband/hw/mthca/mthca_pd.c
+++ b/drivers/infiniband/hw/mthca/mthca_pd.c
@@ -77,7 +77,7 @@
dev->limits.reserved_pds);
}
-void __devexit mthca_cleanup_pd_table(struct mthca_dev *dev)
+void mthca_cleanup_pd_table(struct mthca_dev *dev)
{
/* XXX check if any PDs are still allocated? */
mthca_alloc_cleanup(&dev->pd_table.alloc);
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 1bc2678..057c8e6 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -2204,7 +2204,7 @@
return err;
}
-void __devexit mthca_cleanup_qp_table(struct mthca_dev *dev)
+void mthca_cleanup_qp_table(struct mthca_dev *dev)
{
int i;
u8 status;
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index 0cfd158..2dd3aea 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -206,7 +206,7 @@
roundup_pow_of_two(sizeof (struct mthca_next_seg) +
srq->max_gs * sizeof (struct mthca_data_seg)));
- if (ds > dev->limits.max_desc_sz)
+ if (!mthca_is_memfree(dev) && (ds > dev->limits.max_desc_sz))
return -EINVAL;
srq->wqe_shift = long_log2(ds);
@@ -684,7 +684,7 @@
return err;
}
-void __devexit mthca_cleanup_srq_table(struct mthca_dev *dev)
+void mthca_cleanup_srq_table(struct mthca_dev *dev)
{
if (!(dev->mthca_flags & MTHCA_FLAG_SRQ))
return;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 53a32f6..9b0bd7c 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -723,7 +723,7 @@
* destination address onto the front of the skb so we can
* figure out where to send the packet later.
*/
- if (!skb->dst || !skb->dst->neighbour) {
+ if ((!skb->dst || !skb->dst->neighbour) && daddr) {
struct ipoib_pseudoheader *phdr =
(struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr);
memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 61924cc..fd8a95a 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -607,10 +607,10 @@
*/
if (likely(scmnd->use_sg)) {
nents = scmnd->use_sg;
- scat = (struct scatterlist *) scmnd->request_buffer;
+ scat = scmnd->request_buffer;
} else {
nents = 1;
- scat = (struct scatterlist *) scmnd->request_buffer;
+ scat = &req->fake_sg;
}
dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 0a90962..63f387e 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -66,7 +66,7 @@
static char hil_language[][16] = { HIL_LOCALE_MAP };
struct hil_kbd {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
/* Input buffer and index for packets from HIL bus. */
@@ -86,7 +86,7 @@
/* Process a complete packet after transfer from the HIL */
static void hil_kbd_process_record(struct hil_kbd *kbd)
{
- struct input_dev *dev = &kbd->dev;
+ struct input_dev *dev = kbd->dev;
hil_packet *data = kbd->data;
hil_packet p;
int idx, i, cnt;
@@ -240,8 +240,8 @@
return;
}
- input_unregister_device(&kbd->dev);
serio_close(serio);
+ input_unregister_device(kbd->dev);
kfree(kbd);
}
@@ -251,16 +251,18 @@
uint8_t did, *idd;
int i;
- kbd = kmalloc(sizeof(*kbd), GFP_KERNEL);
+ kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
if (!kbd)
return -ENOMEM;
- memset(kbd, 0, sizeof(struct hil_kbd));
+
+ kbd->dev = input_allocate_device();
+ if (!kbd->dev) goto bail1;
+ kbd->dev->private = kbd;
if (serio_open(serio, drv)) goto bail0;
serio_set_drvdata(serio, kbd);
kbd->serio = serio;
- kbd->dev.private = kbd;
init_MUTEX_LOCKED(&(kbd->sem));
@@ -302,38 +304,38 @@
did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
break;
default:
- goto bail1;
+ goto bail2;
}
if(HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) {
printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n");
- goto bail1;
+ goto bail2;
}
- kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
- kbd->dev.keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
- kbd->dev.keycodesize = sizeof(hil_kbd_set1[0]);
- kbd->dev.keycode = hil_kbd_set1;
- kbd->dev.name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
- kbd->dev.phys = "hpkbd/input0"; /* XXX */
+ kbd->dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ kbd->dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+ kbd->dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
+ kbd->dev->keycodesize = sizeof(hil_kbd_set1[0]);
+ kbd->dev->keycode = hil_kbd_set1;
+ kbd->dev->name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
+ kbd->dev->phys = "hpkbd/input0"; /* XXX */
- kbd->dev.id.bustype = BUS_HIL;
- kbd->dev.id.vendor = PCI_VENDOR_ID_HP;
- kbd->dev.id.product = 0x0001; /* TODO: get from kbd->rsc */
- kbd->dev.id.version = 0x0100; /* TODO: get from kbd->rsc */
- kbd->dev.dev = &serio->dev;
+ kbd->dev->id.bustype = BUS_HIL;
+ kbd->dev->id.vendor = PCI_VENDOR_ID_HP;
+ kbd->dev->id.product = 0x0001; /* TODO: get from kbd->rsc */
+ kbd->dev->id.version = 0x0100; /* TODO: get from kbd->rsc */
+ kbd->dev->dev = &serio->dev;
for (i = 0; i < 128; i++) {
- set_bit(hil_kbd_set1[i], kbd->dev.keybit);
- set_bit(hil_kbd_set3[i], kbd->dev.keybit);
+ set_bit(hil_kbd_set1[i], kbd->dev->keybit);
+ set_bit(hil_kbd_set3[i], kbd->dev->keybit);
}
- clear_bit(0, kbd->dev.keybit);
+ clear_bit(0, kbd->dev->keybit);
- input_register_device(&kbd->dev);
+ input_register_device(kbd->dev);
printk(KERN_INFO "input: %s, ID: %d\n",
- kbd->dev.name, did);
+ kbd->dev->name, did);
serio->write(serio, 0);
serio->write(serio, 0);
@@ -343,8 +345,10 @@
up(&(kbd->sem));
return 0;
- bail1:
+ bail2:
serio_close(serio);
+ bail1:
+ input_free_device(kbd->dev);
bail0:
kfree(kbd);
serio_set_drvdata(serio, NULL);
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index e95bc05..33edd03 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1998 Philip Blundell <philb@gnu.org>
* Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai>
- * Copyright (C) 1999-2003 Helge Deller <deller@gmx.de>
+ * Copyright (C) 1999-2006 Helge Deller <deller@gmx.de>
*
* Very basic HP Human Interface Loop (HIL) driver.
* This driver handles the keyboard on HP300 (m68k) and on some
@@ -90,7 +90,7 @@
/* HIL structure */
static struct {
- struct input_dev dev;
+ struct input_dev *dev;
unsigned int curdev;
@@ -117,7 +117,7 @@
down = (hil_dev.data[1] & 1) == 0;
scode = hil_dev.data[1] >> 1;
key = hphilkeyb_keycode[scode];
- input_report_key(&hil_dev.dev, key, down);
+ input_report_key(hil_dev.dev, key, down);
break;
}
hil_dev.curdev = 0;
@@ -207,9 +207,14 @@
unsigned int i, kbid;
wait_queue_head_t hil_wait;
- if (hil_dev.dev.id.bustype) {
+ if (hil_dev.dev) {
return -ENODEV; /* already initialized */
}
+
+ hil_dev.dev = input_allocate_device();
+ if (!hil_dev.dev)
+ return -ENOMEM;
+ hil_dev.dev->private = &hil_dev;
#if defined(CONFIG_HP300)
if (!hwreg_present((void *)(HILBASE + HIL_DATA)))
@@ -247,28 +252,26 @@
c = 0;
hil_do(HIL_WRITEKBDSADR, &c, 1);
- init_input_dev(&hil_dev.dev);
-
for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
if (hphilkeyb_keycode[i] != KEY_RESERVED)
- set_bit(hphilkeyb_keycode[i], hil_dev.dev.keybit);
+ set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
- hil_dev.dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- hil_dev.dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
- hil_dev.dev.keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
- hil_dev.dev.keycodesize = sizeof(hphilkeyb_keycode[0]);
- hil_dev.dev.keycode = hphilkeyb_keycode;
- hil_dev.dev.name = "HIL keyboard";
- hil_dev.dev.phys = "hpkbd/input0";
+ hil_dev.dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ hil_dev.dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+ hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
+ hil_dev.dev->keycodesize = sizeof(hphilkeyb_keycode[0]);
+ hil_dev.dev->keycode = hphilkeyb_keycode;
+ hil_dev.dev->name = "HIL keyboard";
+ hil_dev.dev->phys = "hpkbd/input0";
- hil_dev.dev.id.bustype = BUS_HIL;
- hil_dev.dev.id.vendor = PCI_VENDOR_ID_HP;
- hil_dev.dev.id.product = 0x0001;
- hil_dev.dev.id.version = 0x0010;
+ hil_dev.dev->id.bustype = BUS_HIL;
+ hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP;
+ hil_dev.dev->id.product = 0x0001;
+ hil_dev.dev->id.version = 0x0010;
- input_register_device(&hil_dev.dev);
+ input_register_device(hil_dev.dev);
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
- hil_dev.dev.name, kbid, HILBASE, HIL_IRQ);
+ hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
return 0;
}
@@ -329,7 +332,9 @@
/* Turn off interrupts */
hil_do(HIL_INTOFF, NULL, 0);
- input_unregister_device(&hil_dev.dev);
+ input_unregister_device(hil_dev.dev);
+
+ hil_dev.dev = NULL;
#if defined(CONFIG_PARISC)
unregister_parisc_driver(&hil_driver);
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
index c2bf2ed..bfb564f 100644
--- a/drivers/input/mouse/hil_ptr.c
+++ b/drivers/input/mouse/hil_ptr.c
@@ -55,7 +55,7 @@
#define HIL_PTR_MAX_LENGTH 16
struct hil_ptr {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
/* Input buffer and index for packets from HIL bus. */
@@ -79,7 +79,7 @@
/* Process a complete packet after transfer from the HIL */
static void hil_ptr_process_record(struct hil_ptr *ptr)
{
- struct input_dev *dev = &ptr->dev;
+ struct input_dev *dev = ptr->dev;
hil_packet *data = ptr->data;
hil_packet p;
int idx, i, cnt, laxis;
@@ -148,12 +148,12 @@
if (absdev) {
val = lo + (hi<<8);
#ifdef TABLET_AUTOADJUST
- if (val < ptr->dev.absmin[ABS_X + i])
- ptr->dev.absmin[ABS_X + i] = val;
- if (val > ptr->dev.absmax[ABS_X + i])
- ptr->dev.absmax[ABS_X + i] = val;
+ if (val < dev->absmin[ABS_X + i])
+ dev->absmin[ABS_X + i] = val;
+ if (val > dev->absmax[ABS_X + i])
+ dev->absmax[ABS_X + i] = val;
#endif
- if (i%3) val = ptr->dev.absmax[ABS_X + i] - val;
+ if (i%3) val = dev->absmax[ABS_X + i] - val;
input_report_abs(dev, ABS_X + i, val);
} else {
val = (int) (((int8_t)lo) | ((int8_t)hi<<8));
@@ -233,26 +233,29 @@
return;
}
- input_unregister_device(&ptr->dev);
serio_close(serio);
+ input_unregister_device(ptr->dev);
kfree(ptr);
}
static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
{
- struct hil_ptr *ptr;
- char *txt;
- unsigned int i, naxsets, btntype;
- uint8_t did, *idd;
+ struct hil_ptr *ptr;
+ char *txt;
+ unsigned int i, naxsets, btntype;
+ uint8_t did, *idd;
- if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM;
- memset(ptr, 0, sizeof(struct hil_ptr));
+ if (!(ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL)))
+ return -ENOMEM;
- if (serio_open(serio, driver)) goto bail0;
+ ptr->dev = input_allocate_device();
+ if (!ptr->dev) goto bail0;
+ ptr->dev->private = ptr;
+
+ if (serio_open(serio, driver)) goto bail1;
serio_set_drvdata(serio, ptr);
ptr->serio = serio;
- ptr->dev.private = ptr;
init_MUTEX_LOCKED(&(ptr->sem));
@@ -283,25 +286,24 @@
up(&(ptr->sem));
- init_input_dev(&ptr->dev);
did = ptr->idd[0];
idd = ptr->idd + 1;
txt = "unknown";
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
- ptr->dev.evbit[0] = BIT(EV_REL);
+ ptr->dev->evbit[0] = BIT(EV_REL);
txt = "relative";
}
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_ABS) {
- ptr->dev.evbit[0] = BIT(EV_ABS);
+ ptr->dev->evbit[0] = BIT(EV_ABS);
txt = "absolute";
}
- if (!ptr->dev.evbit[0]) {
- goto bail1;
+ if (!ptr->dev->evbit[0]) {
+ goto bail2;
}
ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
- if (ptr->nbtn) ptr->dev.evbit[0] |= BIT(EV_KEY);
+ if (ptr->nbtn) ptr->dev->evbit[0] |= BIT(EV_KEY);
naxsets = HIL_IDD_NUM_AXSETS(*idd);
ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
@@ -325,7 +327,7 @@
btntype = BTN_MOUSE;
for (i = 0; i < ptr->nbtn; i++) {
- set_bit(btntype | i, ptr->dev.keybit);
+ set_bit(btntype | i, ptr->dev->keybit);
ptr->btnmap[i] = btntype | i;
}
@@ -337,50 +339,52 @@
if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
for (i = 0; i < ptr->naxes; i++) {
- set_bit(REL_X + i, ptr->dev.relbit);
+ set_bit(REL_X + i, ptr->dev->relbit);
}
for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
- set_bit(REL_X + i, ptr->dev.relbit);
+ set_bit(REL_X + i, ptr->dev->relbit);
}
} else {
for (i = 0; i < ptr->naxes; i++) {
- set_bit(ABS_X + i, ptr->dev.absbit);
- ptr->dev.absmin[ABS_X + i] = 0;
- ptr->dev.absmax[ABS_X + i] =
+ set_bit(ABS_X + i, ptr->dev->absbit);
+ ptr->dev->absmin[ABS_X + i] = 0;
+ ptr->dev->absmax[ABS_X + i] =
HIL_IDD_AXIS_MAX((ptr->idd + 1), i);
}
for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
- set_bit(ABS_X + i, ptr->dev.absbit);
- ptr->dev.absmin[ABS_X + i] = 0;
- ptr->dev.absmax[ABS_X + i] =
+ set_bit(ABS_X + i, ptr->dev->absbit);
+ ptr->dev->absmin[ABS_X + i] = 0;
+ ptr->dev->absmax[ABS_X + i] =
HIL_IDD_AXIS_MAX((ptr->idd + 1), (i - 3));
}
#ifdef TABLET_AUTOADJUST
for (i = 0; i < ABS_MAX; i++) {
- int diff = ptr->dev.absmax[ABS_X + i] / 10;
- ptr->dev.absmin[ABS_X + i] += diff;
- ptr->dev.absmax[ABS_X + i] -= diff;
+ int diff = ptr->dev->absmax[ABS_X + i] / 10;
+ ptr->dev->absmin[ABS_X + i] += diff;
+ ptr->dev->absmax[ABS_X + i] -= diff;
}
#endif
}
- ptr->dev.name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME;
+ ptr->dev->name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME;
- ptr->dev.id.bustype = BUS_HIL;
- ptr->dev.id.vendor = PCI_VENDOR_ID_HP;
- ptr->dev.id.product = 0x0001; /* TODO: get from ptr->rsc */
- ptr->dev.id.version = 0x0100; /* TODO: get from ptr->rsc */
- ptr->dev.dev = &serio->dev;
+ ptr->dev->id.bustype = BUS_HIL;
+ ptr->dev->id.vendor = PCI_VENDOR_ID_HP;
+ ptr->dev->id.product = 0x0001; /* TODO: get from ptr->rsc */
+ ptr->dev->id.version = 0x0100; /* TODO: get from ptr->rsc */
+ ptr->dev->dev = &serio->dev;
- input_register_device(&ptr->dev);
+ input_register_device(ptr->dev);
printk(KERN_INFO "input: %s (%s), ID: %d\n",
- ptr->dev.name,
+ ptr->dev->name,
(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
did);
return 0;
- bail1:
+ bail2:
serio_close(serio);
+ bail1:
+ input_free_device(ptr->dev);
bail0:
kfree(ptr);
serio_set_drvdata(serio, NULL);
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index a7b0de0..c0b1e4b 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -1,7 +1,7 @@
/*
* drivers/input/serio/gscps2.c
*
- * Copyright (c) 2004 Helge Deller <deller@gmx.de>
+ * Copyright (c) 2004-2006 Helge Deller <deller@gmx.de>
* Copyright (c) 2002 Laurent Canet <canetl@esiee.fr>
* Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org>
*
@@ -354,7 +354,7 @@
memset(serio, 0, sizeof(struct serio));
ps2port->port = serio;
ps2port->padev = dev;
- ps2port->addr = ioremap(hpa, GSC_STATUS + 4);
+ ps2port->addr = ioremap_nocache(hpa, GSC_STATUS + 4);
spin_lock_init(&ps2port->lock);
gscps2_reset(ps2port);
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 94c9afb..f4f7122 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -46,7 +46,8 @@
pr_debug("%s: SCIOCRESET: ioctl received\n",
sc_adapter[card]->devicename);
sc_adapter[card]->StartOnReset = 0;
- return (reset(card));
+ kfree(rcvmsg);
+ return reset(card);
}
case SCIOCLOAD:
@@ -183,7 +184,7 @@
sc_adapter[card]->devicename);
spid = kmalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
- if(!spid) {
+ if (!spid) {
kfree(rcvmsg);
return -ENOMEM;
}
@@ -195,10 +196,10 @@
if (!status) {
pr_debug("%s: SCIOCGETSPID: command successful\n",
sc_adapter[card]->devicename);
- }
- else {
+ } else {
pr_debug("%s: SCIOCGETSPID: command failed (status = %d)\n",
sc_adapter[card]->devicename, status);
+ kfree(spid);
kfree(rcvmsg);
return status;
}
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
new file mode 100644
index 0000000..2c4f20b
--- /dev/null
+++ b/drivers/leds/Kconfig
@@ -0,0 +1,77 @@
+
+menu "LED devices"
+
+config NEW_LEDS
+ bool "LED Support"
+ help
+ Say Y to enable Linux LED support. This is not related to standard
+ keyboard LEDs which are controlled via the input system.
+
+config LEDS_CLASS
+ tristate "LED Class Support"
+ depends NEW_LEDS
+ help
+ This option enables the led sysfs class in /sys/class/leds. You'll
+ need this to do anything useful with LEDs. If unsure, say N.
+
+config LEDS_TRIGGERS
+ bool "LED Trigger support"
+ depends NEW_LEDS
+ help
+ This option enables trigger support for the leds class.
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
+config LEDS_CORGI
+ tristate "LED Support for the Sharp SL-C7x0 series"
+ depends LEDS_CLASS && PXA_SHARP_C7xx
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-C7x0 series (C700, C750, C760, C860).
+
+config LEDS_LOCOMO
+ tristate "LED Support for Locomo device"
+ depends LEDS_CLASS && SHARP_LOCOMO
+ help
+ This option enables support for the LEDs on Sharp Locomo.
+ Zaurus models SL-5500 and SL-5600.
+
+config LEDS_SPITZ
+ tristate "LED Support for the Sharp SL-Cxx00 series"
+ depends LEDS_CLASS && PXA_SHARP_Cxx00
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-Cxx00 series (C1000, C3000, C3100).
+
+config LEDS_IXP4XX
+ tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
+ depends LEDS_CLASS && ARCH_IXP4XX
+ help
+ This option enables support for the LEDs connected to GPIO
+ outputs of the Intel IXP4XX processors. To be useful the
+ particular board must have LEDs and they must be connected
+ to the GPIO lines. If unsure, say Y.
+
+config LEDS_TOSA
+ tristate "LED Support for the Sharp SL-6000 series"
+ depends LEDS_CLASS && PXA_SHARPSL
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-6000 series.
+
+config LEDS_TRIGGER_TIMER
+ tristate "LED Timer Trigger"
+ depends LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by a programmable timer
+ via sysfs. If unsure, say Y.
+
+config LEDS_TRIGGER_IDE_DISK
+ bool "LED Timer Trigger"
+ depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ help
+ This allows LEDs to be controlled by IDE disk activity.
+ If unsure, say Y.
+
+endmenu
+
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
new file mode 100644
index 0000000..40699d3
--- /dev/null
+++ b/drivers/leds/Makefile
@@ -0,0 +1,16 @@
+
+# LED Core
+obj-$(CONFIG_NEW_LEDS) += led-core.o
+obj-$(CONFIG_LEDS_CLASS) += led-class.o
+obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
+
+# LED Platform Drivers
+obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
+obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
+obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
+obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
+obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
+
+# LED Triggers
+obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
new file mode 100644
index 0000000..b0b5d05
--- /dev/null
+++ b/drivers/leds/led-class.c
@@ -0,0 +1,167 @@
+/*
+ * LED Class Core
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005-2006 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+static struct class *leds_class;
+
+static ssize_t led_brightness_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ ssize_t ret = 0;
+
+ /* no lock needed for this */
+ sprintf(buf, "%u\n", led_cdev->brightness);
+ ret = strlen(buf) + 1;
+
+ return ret;
+}
+
+static ssize_t led_brightness_store(struct class_device *dev,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ ssize_t ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ ret = after - buf;
+ led_set_brightness(led_cdev, state);
+ }
+
+ return ret;
+}
+
+static CLASS_DEVICE_ATTR(brightness, 0644, led_brightness_show,
+ led_brightness_store);
+#ifdef CONFIG_LEDS_TRIGGERS
+static CLASS_DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
+#endif
+
+/**
+ * led_classdev_suspend - suspend an led_classdev.
+ * @led_cdev: the led_classdev to suspend.
+ */
+void led_classdev_suspend(struct led_classdev *led_cdev)
+{
+ led_cdev->flags |= LED_SUSPENDED;
+ led_cdev->brightness_set(led_cdev, 0);
+}
+EXPORT_SYMBOL_GPL(led_classdev_suspend);
+
+/**
+ * led_classdev_resume - resume an led_classdev.
+ * @led_cdev: the led_classdev to resume.
+ */
+void led_classdev_resume(struct led_classdev *led_cdev)
+{
+ led_cdev->brightness_set(led_cdev, led_cdev->brightness);
+ led_cdev->flags &= ~LED_SUSPENDED;
+}
+EXPORT_SYMBOL_GPL(led_classdev_resume);
+
+/**
+ * led_classdev_register - register a new object of led_classdev class.
+ * @dev: The device to register.
+ * @led_cdev: the led_classdev structure for this device.
+ */
+int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
+{
+ led_cdev->class_dev = class_device_create(leds_class, NULL, 0,
+ parent, "%s", led_cdev->name);
+ if (unlikely(IS_ERR(led_cdev->class_dev)))
+ return PTR_ERR(led_cdev->class_dev);
+
+ class_set_devdata(led_cdev->class_dev, led_cdev);
+
+ /* register the attributes */
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_brightness);
+
+ /* add to the list of leds */
+ write_lock(&leds_list_lock);
+ list_add_tail(&led_cdev->node, &leds_list);
+ write_unlock(&leds_list_lock);
+
+#ifdef CONFIG_LEDS_TRIGGERS
+ rwlock_init(&led_cdev->trigger_lock);
+
+ led_trigger_set_default(led_cdev);
+
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_trigger);
+#endif
+
+ printk(KERN_INFO "Registered led device: %s\n",
+ led_cdev->class_dev->class_id);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_classdev_register);
+
+/**
+ * led_classdev_unregister - unregisters a object of led_properties class.
+ * @led_cdev: the led device to unreigister
+ *
+ * Unregisters a previously registered via led_classdev_register object.
+ */
+void led_classdev_unregister(struct led_classdev *led_cdev)
+{
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_brightness);
+#ifdef CONFIG_LEDS_TRIGGERS
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_trigger);
+ write_lock(&led_cdev->trigger_lock);
+ if (led_cdev->trigger)
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+#endif
+
+ class_device_unregister(led_cdev->class_dev);
+
+ write_lock(&leds_list_lock);
+ list_del(&led_cdev->node);
+ write_unlock(&leds_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_classdev_unregister);
+
+static int __init leds_init(void)
+{
+ leds_class = class_create(THIS_MODULE, "leds");
+ if (IS_ERR(leds_class))
+ return PTR_ERR(leds_class);
+ return 0;
+}
+
+static void __exit leds_exit(void)
+{
+ class_destroy(leds_class);
+}
+
+subsys_initcall(leds_init);
+module_exit(leds_exit);
+
+MODULE_AUTHOR("John Lenz, Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Class Interface");
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
new file mode 100644
index 0000000..fe65413
--- /dev/null
+++ b/drivers/leds/led-core.c
@@ -0,0 +1,25 @@
+/*
+ * LED Class Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+rwlock_t leds_list_lock = RW_LOCK_UNLOCKED;
+LIST_HEAD(leds_list);
+
+EXPORT_SYMBOL_GPL(leds_list);
+EXPORT_SYMBOL_GPL(leds_list_lock);
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
new file mode 100644
index 0000000..5e2cd8b
--- /dev/null
+++ b/drivers/leds/led-triggers.c
@@ -0,0 +1,239 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+/*
+ * Nests outside led_cdev->trigger_lock
+ */
+static rwlock_t triggers_list_lock = RW_LOCK_UNLOCKED;
+static LIST_HEAD(trigger_list);
+
+ssize_t led_trigger_store(struct class_device *dev, const char *buf,
+ size_t count)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ char trigger_name[TRIG_NAME_MAX];
+ struct led_trigger *trig;
+ size_t len;
+
+ trigger_name[sizeof(trigger_name) - 1] = '\0';
+ strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
+ len = strlen(trigger_name);
+
+ if (len && trigger_name[len - 1] == '\n')
+ trigger_name[len - 1] = '\0';
+
+ if (!strcmp(trigger_name, "none")) {
+ write_lock(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+ return count;
+ }
+
+ read_lock(&triggers_list_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(trigger_name, trig->name)) {
+ write_lock(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, trig);
+ write_unlock(&led_cdev->trigger_lock);
+
+ read_unlock(&triggers_list_lock);
+ return count;
+ }
+ }
+ read_unlock(&triggers_list_lock);
+
+ return -EINVAL;
+}
+
+
+ssize_t led_trigger_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct led_trigger *trig;
+ int len = 0;
+
+ read_lock(&triggers_list_lock);
+ read_lock(&led_cdev->trigger_lock);
+
+ if (!led_cdev->trigger)
+ len += sprintf(buf+len, "[none] ");
+ else
+ len += sprintf(buf+len, "none ");
+
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (led_cdev->trigger && !strcmp(led_cdev->trigger->name,
+ trig->name))
+ len += sprintf(buf+len, "[%s] ", trig->name);
+ else
+ len += sprintf(buf+len, "%s ", trig->name);
+ }
+ read_unlock(&led_cdev->trigger_lock);
+ read_unlock(&triggers_list_lock);
+
+ len += sprintf(len+buf, "\n");
+ return len;
+}
+
+void led_trigger_event(struct led_trigger *trigger,
+ enum led_brightness brightness)
+{
+ struct list_head *entry;
+
+ if (!trigger)
+ return;
+
+ read_lock(&trigger->leddev_list_lock);
+ list_for_each(entry, &trigger->led_cdevs) {
+ struct led_classdev *led_cdev;
+
+ led_cdev = list_entry(entry, struct led_classdev, trig_list);
+ led_set_brightness(led_cdev, brightness);
+ }
+ read_unlock(&trigger->leddev_list_lock);
+}
+
+/* Caller must ensure led_cdev->trigger_lock held */
+void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
+{
+ unsigned long flags;
+
+ /* Remove any existing trigger */
+ if (led_cdev->trigger) {
+ write_lock_irqsave(&led_cdev->trigger->leddev_list_lock, flags);
+ list_del(&led_cdev->trig_list);
+ write_unlock_irqrestore(&led_cdev->trigger->leddev_list_lock, flags);
+ if (led_cdev->trigger->deactivate)
+ led_cdev->trigger->deactivate(led_cdev);
+ }
+ if (trigger) {
+ write_lock_irqsave(&trigger->leddev_list_lock, flags);
+ list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
+ write_unlock_irqrestore(&trigger->leddev_list_lock, flags);
+ if (trigger->activate)
+ trigger->activate(led_cdev);
+ }
+ led_cdev->trigger = trigger;
+}
+
+void led_trigger_set_default(struct led_classdev *led_cdev)
+{
+ struct led_trigger *trig;
+
+ if (!led_cdev->default_trigger)
+ return;
+
+ read_lock(&triggers_list_lock);
+ write_lock(&led_cdev->trigger_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(led_cdev->default_trigger, trig->name))
+ led_trigger_set(led_cdev, trig);
+ }
+ write_unlock(&led_cdev->trigger_lock);
+ read_unlock(&triggers_list_lock);
+}
+
+int led_trigger_register(struct led_trigger *trigger)
+{
+ struct led_classdev *led_cdev;
+
+ rwlock_init(&trigger->leddev_list_lock);
+ INIT_LIST_HEAD(&trigger->led_cdevs);
+
+ /* Add to the list of led triggers */
+ write_lock(&triggers_list_lock);
+ list_add_tail(&trigger->next_trig, &trigger_list);
+ write_unlock(&triggers_list_lock);
+
+ /* Register with any LEDs that have this as a default trigger */
+ read_lock(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ write_lock(&led_cdev->trigger_lock);
+ if (!led_cdev->trigger && led_cdev->default_trigger &&
+ !strcmp(led_cdev->default_trigger, trigger->name))
+ led_trigger_set(led_cdev, trigger);
+ write_unlock(&led_cdev->trigger_lock);
+ }
+ read_unlock(&leds_list_lock);
+
+ return 0;
+}
+
+void led_trigger_register_simple(const char *name, struct led_trigger **tp)
+{
+ struct led_trigger *trigger;
+
+ trigger = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+
+ if (trigger) {
+ trigger->name = name;
+ led_trigger_register(trigger);
+ }
+ *tp = trigger;
+}
+
+void led_trigger_unregister(struct led_trigger *trigger)
+{
+ struct led_classdev *led_cdev;
+
+ /* Remove from the list of led triggers */
+ write_lock(&triggers_list_lock);
+ list_del(&trigger->next_trig);
+ write_unlock(&triggers_list_lock);
+
+ /* Remove anyone actively using this trigger */
+ read_lock(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ write_lock(&led_cdev->trigger_lock);
+ if (led_cdev->trigger == trigger)
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+ }
+ read_unlock(&leds_list_lock);
+}
+
+void led_trigger_unregister_simple(struct led_trigger *trigger)
+{
+ led_trigger_unregister(trigger);
+ kfree(trigger);
+}
+
+/* Used by LED Class */
+EXPORT_SYMBOL_GPL(led_trigger_set);
+EXPORT_SYMBOL_GPL(led_trigger_set_default);
+EXPORT_SYMBOL_GPL(led_trigger_show);
+EXPORT_SYMBOL_GPL(led_trigger_store);
+
+/* LED Trigger Interface */
+EXPORT_SYMBOL_GPL(led_trigger_register);
+EXPORT_SYMBOL_GPL(led_trigger_unregister);
+
+/* Simple LED Tigger Interface */
+EXPORT_SYMBOL_GPL(led_trigger_register_simple);
+EXPORT_SYMBOL_GPL(led_trigger_unregister_simple);
+EXPORT_SYMBOL_GPL(led_trigger_event);
+
+MODULE_AUTHOR("Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Triggers Core");
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
new file mode 100644
index 0000000..bb7d84d
--- /dev/null
+++ b/drivers/leds/leds-corgi.c
@@ -0,0 +1,121 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/arch/corgi.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/hardware/scoop.h>
+
+static void corgiled_amber_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+ else
+ GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+}
+
+static void corgiled_green_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+}
+
+static struct led_classdev corgi_amber_led = {
+ .name = "corgi:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = corgiled_amber_set,
+};
+
+static struct led_classdev corgi_green_led = {
+ .name = "corgi:green",
+ .default_trigger = "nand-disk",
+ .brightness_set = corgiled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int corgiled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (corgi_amber_led.trigger && strcmp(corgi_amber_led.trigger->name, "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&corgi_amber_led);
+ led_classdev_suspend(&corgi_green_led);
+ return 0;
+}
+
+static int corgiled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&corgi_amber_led);
+ led_classdev_resume(&corgi_green_led);
+ return 0;
+}
+#endif
+
+static int corgiled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &corgi_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &corgi_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&corgi_amber_led);
+
+ return ret;
+}
+
+static int corgiled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&corgi_amber_led);
+ led_classdev_unregister(&corgi_green_led);
+ return 0;
+}
+
+static struct platform_driver corgiled_driver = {
+ .probe = corgiled_probe,
+ .remove = corgiled_remove,
+#ifdef CONFIG_PM
+ .suspend = corgiled_suspend,
+ .resume = corgiled_resume,
+#endif
+ .driver = {
+ .name = "corgi-led",
+ },
+};
+
+static int __init corgiled_init(void)
+{
+ return platform_driver_register(&corgiled_driver);
+}
+
+static void __exit corgiled_exit(void)
+{
+ platform_driver_unregister(&corgiled_driver);
+}
+
+module_init(corgiled_init);
+module_exit(corgiled_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Corgi LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-ixp4xx-gpio.c b/drivers/leds/leds-ixp4xx-gpio.c
new file mode 100644
index 0000000..30ced15
--- /dev/null
+++ b/drivers/leds/leds-ixp4xx-gpio.c
@@ -0,0 +1,215 @@
+/*
+ * IXP4XX GPIO driver LED driver
+ *
+ * Author: John Bowler <jbowler@acm.org>
+ *
+ * Copyright (c) 2006 John Bowler
+ *
+ * Permission is hereby granted, free of charge, to any
+ * person obtaining a copy of this software and associated
+ * documentation files (the "Software"), to deal in the
+ * Software without restriction, including without
+ * limitation the rights to use, copy, modify, merge,
+ * publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the
+ * following conditions:
+ *
+ * The above copyright notice and this permission notice
+ * shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ * ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+ * TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+ * SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/leds.h>
+#include <asm/arch/hardware.h>
+
+extern spinlock_t gpio_lock;
+
+/* Up to 16 gpio lines are possible. */
+#define GPIO_MAX 16
+static struct ixp4xxgpioled_device {
+ struct led_classdev ancestor;
+ int flags;
+} ixp4xxgpioled_devices[GPIO_MAX];
+
+void ixp4xxgpioled_brightness_set(struct led_classdev *pled,
+ enum led_brightness value)
+{
+ const struct ixp4xxgpioled_device *const ixp4xx_dev =
+ container_of(pled, struct ixp4xxgpioled_device, ancestor);
+ const u32 gpio_pin = ixp4xx_dev - ixp4xxgpioled_devices;
+
+ if (gpio_pin < GPIO_MAX && ixp4xx_dev->ancestor.name != 0) {
+ /* Set or clear the 'gpio_pin' bit according to the style
+ * and the required setting (value > 0 == on)
+ */
+ const int gpio_value =
+ (value > 0) == (ixp4xx_dev->flags != IXP4XX_GPIO_LOW) ?
+ IXP4XX_GPIO_HIGH : IXP4XX_GPIO_LOW;
+
+ {
+ unsigned long flags;
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_line_set(gpio_pin, gpio_value);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ }
+ }
+}
+
+/* LEDs are described in resources, the following iterates over the valid
+ * LED resources.
+ */
+#define for_all_leds(i, pdev) \
+ for (i=0; i<pdev->num_resources; ++i) \
+ if (pdev->resource[i].start < GPIO_MAX && \
+ pdev->resource[i].name != 0)
+
+/* The following applies 'operation' to each LED from the given platform,
+ * the function always returns 0 to allow tail call elimination.
+ */
+static int apply_to_all_leds(struct platform_device *pdev,
+ void (*operation)(struct led_classdev *pled))
+{
+ int i;
+
+ for_all_leds(i, pdev)
+ operation(&ixp4xxgpioled_devices[pdev->resource[i].start].ancestor);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixp4xxgpioled_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return apply_to_all_leds(pdev, led_classdev_suspend);
+}
+
+static int ixp4xxgpioled_resume(struct platform_device *pdev)
+{
+ return apply_to_all_leds(pdev, led_classdev_resume);
+}
+#endif
+
+static void ixp4xxgpioled_remove_one_led(struct led_classdev *pled)
+{
+ led_classdev_unregister(pled);
+ pled->name = 0;
+}
+
+static int ixp4xxgpioled_remove(struct platform_device *pdev)
+{
+ return apply_to_all_leds(pdev, ixp4xxgpioled_remove_one_led);
+}
+
+static int ixp4xxgpioled_probe(struct platform_device *pdev)
+{
+ /* The board level has to tell the driver where the
+ * LEDs are connected - there is no way to find out
+ * electrically. It must also say whether the GPIO
+ * lines are active high or active low.
+ *
+ * To do this read the num_resources (the number of
+ * LEDs) and the struct resource (the data for each
+ * LED). The name comes from the resource, and it
+ * isn't copied.
+ */
+ int i;
+
+ for_all_leds(i, pdev) {
+ const u8 gpio_pin = pdev->resource[i].start;
+ int rc;
+
+ if (ixp4xxgpioled_devices[gpio_pin].ancestor.name == 0) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_line_config(gpio_pin, IXP4XX_GPIO_OUT);
+ /* The config can, apparently, reset the state,
+ * I suspect the gpio line may be an input and
+ * the config may cause the line to be latched,
+ * so the setting depends on how the LED is
+ * connected to the line (which affects how it
+ * floats if not driven).
+ */
+ gpio_line_set(gpio_pin, IXP4XX_GPIO_HIGH);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ ixp4xxgpioled_devices[gpio_pin].flags =
+ pdev->resource[i].flags & IORESOURCE_BITS;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.name =
+ pdev->resource[i].name;
+
+ /* This is how a board manufacturer makes the LED
+ * come on on reset - the GPIO line will be high, so
+ * make the LED light when the line is low...
+ */
+ if (ixp4xxgpioled_devices[gpio_pin].flags != IXP4XX_GPIO_LOW)
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness = 100;
+ else
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness = 0;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.flags = 0;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness_set =
+ ixp4xxgpioled_brightness_set;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.default_trigger = 0;
+ }
+
+ rc = led_classdev_register(&pdev->dev,
+ &ixp4xxgpioled_devices[gpio_pin].ancestor);
+ if (rc < 0) {
+ ixp4xxgpioled_devices[gpio_pin].ancestor.name = 0;
+ ixp4xxgpioled_remove(pdev);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver ixp4xxgpioled_driver = {
+ .probe = ixp4xxgpioled_probe,
+ .remove = ixp4xxgpioled_remove,
+#ifdef CONFIG_PM
+ .suspend = ixp4xxgpioled_suspend,
+ .resume = ixp4xxgpioled_resume,
+#endif
+ .driver = {
+ .name = "IXP4XX-GPIO-LED",
+ },
+};
+
+static int __init ixp4xxgpioled_init(void)
+{
+ return platform_driver_register(&ixp4xxgpioled_driver);
+}
+
+static void __exit ixp4xxgpioled_exit(void)
+{
+ platform_driver_unregister(&ixp4xxgpioled_driver);
+}
+
+module_init(ixp4xxgpioled_init);
+module_exit(ixp4xxgpioled_exit);
+
+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
+MODULE_DESCRIPTION("IXP4XX GPIO LED driver");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
new file mode 100644
index 0000000..749a86c
--- /dev/null
+++ b/drivers/leds/leds-locomo.c
@@ -0,0 +1,95 @@
+/*
+ * linux/drivers/leds/locomo.c
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/locomo.h>
+
+static void locomoled_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value, int offset)
+{
+ struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->class_dev->dev);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value)
+ locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
+ else
+ locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
+ local_irq_restore(flags);
+}
+
+static void locomoled_brightness_set0(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
+}
+
+static void locomoled_brightness_set1(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
+}
+
+static struct led_classdev locomo_led0 = {
+ .name = "locomo:amber",
+ .brightness_set = locomoled_brightness_set0,
+};
+
+static struct led_classdev locomo_led1 = {
+ .name = "locomo:green",
+ .brightness_set = locomoled_brightness_set1,
+};
+
+static int locomoled_probe(struct locomo_dev *ldev)
+{
+ int ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led0);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led1);
+ if (ret < 0)
+ led_classdev_unregister(&locomo_led0);
+
+ return ret;
+}
+
+static int locomoled_remove(struct locomo_dev *dev)
+{
+ led_classdev_unregister(&locomo_led0);
+ led_classdev_unregister(&locomo_led1);
+ return 0;
+}
+
+static struct locomo_driver locomoled_driver = {
+ .drv = {
+ .name = "locomoled"
+ },
+ .devid = LOCOMO_DEVID_LED,
+ .probe = locomoled_probe,
+ .remove = locomoled_remove,
+};
+
+static int __init locomoled_init(void)
+{
+ return locomo_driver_register(&locomoled_driver);
+}
+module_init(locomoled_init);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
+MODULE_DESCRIPTION("Locomo LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
new file mode 100644
index 0000000..65bbef4
--- /dev/null
+++ b/drivers/leds/leds-spitz.c
@@ -0,0 +1,125 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/spitz.h>
+
+static void spitzled_amber_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+ else
+ reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+}
+
+static void spitzled_green_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+ else
+ reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+}
+
+static struct led_classdev spitz_amber_led = {
+ .name = "spitz:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = spitzled_amber_set,
+};
+
+static struct led_classdev spitz_green_led = {
+ .name = "spitz:green",
+ .default_trigger = "ide-disk",
+ .brightness_set = spitzled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int spitzled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (spitz_amber_led.trigger && strcmp(spitz_amber_led.trigger->name, "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&spitz_amber_led);
+ led_classdev_suspend(&spitz_green_led);
+ return 0;
+}
+
+static int spitzled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&spitz_amber_led);
+ led_classdev_resume(&spitz_green_led);
+ return 0;
+}
+#endif
+
+static int spitzled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (machine_is_akita())
+ spitz_green_led.default_trigger = "nand-disk";
+
+ ret = led_classdev_register(&pdev->dev, &spitz_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &spitz_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&spitz_amber_led);
+
+ return ret;
+}
+
+static int spitzled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&spitz_amber_led);
+ led_classdev_unregister(&spitz_green_led);
+
+ return 0;
+}
+
+static struct platform_driver spitzled_driver = {
+ .probe = spitzled_probe,
+ .remove = spitzled_remove,
+#ifdef CONFIG_PM
+ .suspend = spitzled_suspend,
+ .resume = spitzled_resume,
+#endif
+ .driver = {
+ .name = "spitz-led",
+ },
+};
+
+static int __init spitzled_init(void)
+{
+ return platform_driver_register(&spitzled_driver);
+}
+
+static void __exit spitzled_exit(void)
+{
+ platform_driver_unregister(&spitzled_driver);
+}
+
+module_init(spitzled_init);
+module_exit(spitzled_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Spitz LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c
new file mode 100644
index 0000000..c9e8cc1
--- /dev/null
+++ b/drivers/leds/leds-tosa.c
@@ -0,0 +1,131 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005 Dirk Opfer
+ *
+ * Author: Dirk Opfer <Dirk@Opfer-Online.de>
+ * based on spitz.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/tosa.h>
+
+static void tosaled_amber_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_CHRG_ERR_LED);
+ else
+ reset_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_CHRG_ERR_LED);
+}
+
+static void tosaled_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_NOTE_LED);
+ else
+ reset_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_NOTE_LED);
+}
+
+static struct led_classdev tosa_amber_led = {
+ .name = "tosa:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = tosaled_amber_set,
+};
+
+static struct led_classdev tosa_green_led = {
+ .name = "tosa:green",
+ .default_trigger = "nand-disk",
+ .brightness_set = tosaled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int tosaled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (tosa_amber_led.trigger && strcmp(tosa_amber_led.trigger->name,
+ "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&tosa_amber_led);
+ led_classdev_suspend(&tosa_green_led);
+ return 0;
+}
+
+static int tosaled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&tosa_amber_led);
+ led_classdev_resume(&tosa_green_led);
+ return 0;
+}
+#else
+#define tosaled_suspend NULL
+#define tosaled_resume NULL
+#endif
+
+static int tosaled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &tosa_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &tosa_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&tosa_amber_led);
+
+ return ret;
+}
+
+static int tosaled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&tosa_amber_led);
+ led_classdev_unregister(&tosa_green_led);
+
+ return 0;
+}
+
+static struct platform_driver tosaled_driver = {
+ .probe = tosaled_probe,
+ .remove = tosaled_remove,
+ .suspend = tosaled_suspend,
+ .resume = tosaled_resume,
+ .driver = {
+ .name = "tosa-led",
+ },
+};
+
+static int __init tosaled_init(void)
+{
+ return platform_driver_register(&tosaled_driver);
+}
+
+static void __exit tosaled_exit(void)
+{
+ platform_driver_unregister(&tosaled_driver);
+}
+
+module_init(tosaled_init);
+module_exit(tosaled_exit);
+
+MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
+MODULE_DESCRIPTION("Tosa LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
new file mode 100644
index 0000000..a715c4e
--- /dev/null
+++ b/drivers/leds/leds.h
@@ -0,0 +1,44 @@
+/*
+ * LED Core
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LEDS_H_INCLUDED
+#define __LEDS_H_INCLUDED
+
+#include <linux/leds.h>
+
+static inline void led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value > LED_FULL)
+ value = LED_FULL;
+ led_cdev->brightness = value;
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ led_cdev->brightness_set(led_cdev, value);
+}
+
+extern rwlock_t leds_list_lock;
+extern struct list_head leds_list;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+void led_trigger_set_default(struct led_classdev *led_cdev);
+void led_trigger_set(struct led_classdev *led_cdev,
+ struct led_trigger *trigger);
+#else
+#define led_trigger_set_default(x) do {} while(0)
+#define led_trigger_set(x, y) do {} while(0)
+#endif
+
+ssize_t led_trigger_store(struct class_device *dev, const char *buf,
+ size_t count);
+ssize_t led_trigger_show(struct class_device *dev, char *buf);
+
+#endif /* __LEDS_H_INCLUDED */
diff --git a/drivers/leds/ledtrig-ide-disk.c b/drivers/leds/ledtrig-ide-disk.c
new file mode 100644
index 0000000..fa65188
--- /dev/null
+++ b/drivers/leds/ledtrig-ide-disk.c
@@ -0,0 +1,62 @@
+/*
+ * LED IDE-Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+
+static void ledtrig_ide_timerfunc(unsigned long data);
+
+DEFINE_LED_TRIGGER(ledtrig_ide);
+static DEFINE_TIMER(ledtrig_ide_timer, ledtrig_ide_timerfunc, 0, 0);
+static int ide_activity;
+static int ide_lastactivity;
+
+void ledtrig_ide_activity(void)
+{
+ ide_activity++;
+ if (!timer_pending(&ledtrig_ide_timer))
+ mod_timer(&ledtrig_ide_timer, jiffies + msecs_to_jiffies(10));
+}
+EXPORT_SYMBOL(ledtrig_ide_activity);
+
+static void ledtrig_ide_timerfunc(unsigned long data)
+{
+ if (ide_lastactivity != ide_activity) {
+ ide_lastactivity = ide_activity;
+ led_trigger_event(ledtrig_ide, LED_FULL);
+ mod_timer(&ledtrig_ide_timer, jiffies + msecs_to_jiffies(10));
+ } else {
+ led_trigger_event(ledtrig_ide, LED_OFF);
+ }
+}
+
+static int __init ledtrig_ide_init(void)
+{
+ led_trigger_register_simple("ide-disk", &ledtrig_ide);
+ return 0;
+}
+
+static void __exit ledtrig_ide_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_ide);
+}
+
+module_init(ledtrig_ide_init);
+module_exit(ledtrig_ide_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("LED IDE Disk Activity Trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
new file mode 100644
index 0000000..f484b5d6
--- /dev/null
+++ b/drivers/leds/ledtrig-timer.c
@@ -0,0 +1,170 @@
+/*
+ * LED Kernel Timer Trigger
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+struct timer_trig_data {
+ unsigned long delay_on; /* milliseconds on */
+ unsigned long delay_off; /* milliseconds off */
+ struct timer_list timer;
+};
+
+static void led_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ unsigned long brightness = LED_OFF;
+ unsigned long delay = timer_data->delay_off;
+
+ if (!timer_data->delay_on || !timer_data->delay_off) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
+ if (!led_cdev->brightness) {
+ brightness = LED_FULL;
+ delay = timer_data->delay_on;
+ }
+
+ led_set_brightness(led_cdev, brightness);
+
+ mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static ssize_t led_delay_on_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ sprintf(buf, "%lu\n", timer_data->delay_on);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ int ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ timer_data->delay_on = state;
+ mod_timer(&timer_data->timer, jiffies + 1);
+ ret = after - buf;
+ }
+
+ return ret;
+}
+
+static ssize_t led_delay_off_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ sprintf(buf, "%lu\n", timer_data->delay_off);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ int ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ timer_data->delay_off = state;
+ mod_timer(&timer_data->timer, jiffies + 1);
+ ret = after - buf;
+ }
+
+ return ret;
+}
+
+static CLASS_DEVICE_ATTR(delay_on, 0644, led_delay_on_show,
+ led_delay_on_store);
+static CLASS_DEVICE_ATTR(delay_off, 0644, led_delay_off_show,
+ led_delay_off_store);
+
+static void timer_trig_activate(struct led_classdev *led_cdev)
+{
+ struct timer_trig_data *timer_data;
+
+ timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
+ if (!timer_data)
+ return;
+
+ led_cdev->trigger_data = timer_data;
+
+ init_timer(&timer_data->timer);
+ timer_data->timer.function = led_timer_function;
+ timer_data->timer.data = (unsigned long) led_cdev;
+
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_delay_on);
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_delay_off);
+}
+
+static void timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ if (timer_data) {
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_delay_on);
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_delay_off);
+ del_timer_sync(&timer_data->timer);
+ kfree(timer_data);
+ }
+}
+
+static struct led_trigger timer_led_trigger = {
+ .name = "timer",
+ .activate = timer_trig_activate,
+ .deactivate = timer_trig_deactivate,
+};
+
+static int __init timer_trig_init(void)
+{
+ return led_trigger_register(&timer_led_trigger);
+}
+
+static void __exit timer_trig_exit(void)
+{
+ led_trigger_unregister(&timer_led_trigger);
+}
+
+module_init(timer_trig_init);
+module_exit(timer_trig_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Timer LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 34fcaba..259fd89 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -42,6 +42,7 @@
#include <asm/semaphore.h>
#ifdef CONFIG_PPC
#include <asm/prom.h>
+#include <asm/machdep.h>
#endif
@@ -294,7 +295,7 @@
int i;
#ifdef CONFIG_PPC32
- if ( (_machine != _MACH_chrp) && (_machine != _MACH_Pmac) )
+ if (!machine_is(chrp) && !machine_is(powermac))
return 0;
#endif
#ifdef CONFIG_MAC
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index f5779a7..394334e 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -1206,8 +1206,8 @@
static int __init adbhid_init(void)
{
#ifndef CONFIG_MAC
- if ( (_machine != _MACH_chrp) && (_machine != _MACH_Pmac) )
- return 0;
+ if (!machine_is(chrp) && !machine_is(powermac))
+ return 0;
#endif
led_request.complete = 1;
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 8dbf285..53c1c79 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -839,8 +839,8 @@
media_bays[i].cd_index = -1;
#endif
}
- if (_machine != _MACH_Pmac)
- return -ENODEV;
+ if (!machine_is(powermac))
+ return 0;
macio_register_driver(&media_bay_driver);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 039e071..1ed5152 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -215,13 +215,11 @@
return;
if (!mddev->raid_disks && list_empty(&mddev->disks)) {
list_del(&mddev->all_mddevs);
- /* that blocks */
+ spin_unlock(&all_mddevs_lock);
blk_cleanup_queue(mddev->queue);
- /* that also blocks */
kobject_unregister(&mddev->kobj);
- /* result blows... */
- }
- spin_unlock(&all_mddevs_lock);
+ } else
+ spin_unlock(&all_mddevs_lock);
}
static mddev_t * mddev_find(dev_t unit)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 3cb0872..9b374c9 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1135,8 +1135,19 @@
mirror = i;
break;
}
- if (!uptodate)
+ if (!uptodate) {
+ int sync_blocks = 0;
+ sector_t s = r1_bio->sector;
+ long sectors_to_go = r1_bio->sectors;
+ /* make sure these bits doesn't get cleared. */
+ do {
+ bitmap_end_sync(mddev->bitmap, r1_bio->sector,
+ &sync_blocks, 1);
+ s += sync_blocks;
+ sectors_to_go -= sync_blocks;
+ } while (sectors_to_go > 0);
md_error(mddev, conf->mirrors[mirror].rdev);
+ }
update_head_pos(mirror, r1_bio);
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index 6df4930..ab64b37 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -2151,6 +2151,8 @@
}
/* Ok, everything is just fine now */
+ sysfs_create_group(&mddev->kobj, &raid6_attrs_group);
+
mddev->array_size = mddev->size * (mddev->raid_disks - 2);
mddev->queue->unplug_fn = raid6_unplug_device;
diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c
index 3021f21..0b00e60 100644
--- a/drivers/media/video/cpia_pp.c
+++ b/drivers/media/video/cpia_pp.c
@@ -873,7 +873,7 @@
parport_nr[parport_ptr++] = PPCPIA_PARPORT_NONE;
}
- return 0;
+ return 1;
}
__setup("cpia_pp=", cpia_pp_setup);
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index 522e9dd..d9e3cad 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -2156,7 +2156,7 @@
struct pci_dev *pdev;
int rc;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return 0;
planb_devices = find_devices("planb");
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c
index fdb91b6..5711561 100644
--- a/drivers/mtd/chips/amd_flash.c
+++ b/drivers/mtd/chips/amd_flash.c
@@ -664,7 +664,7 @@
printk("%s: Probing for AMD compatible flash...\n", map->name);
if ((table_pos[0] = probe_new_chip(mtd, 0, NULL, &temp, table,
- sizeof(table)/sizeof(table[0])))
+ ARRAY_SIZE(table)))
== -1) {
printk(KERN_WARNING
"%s: Found no AMD compatible device at location zero\n",
@@ -696,7 +696,7 @@
base += (1 << temp.chipshift)) {
int numchips = temp.numchips;
table_pos[numchips] = probe_new_chip(mtd, base, chips,
- &temp, table, sizeof(table)/sizeof(table[0]));
+ &temp, table, ARRAY_SIZE(table));
}
mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) *
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index edb306c..517ea33 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -34,6 +34,7 @@
#define MANUFACTURER_MACRONIX 0x00C2
#define MANUFACTURER_NEC 0x0010
#define MANUFACTURER_PMC 0x009D
+#define MANUFACTURER_SHARP 0x00b0
#define MANUFACTURER_SST 0x00BF
#define MANUFACTURER_ST 0x0020
#define MANUFACTURER_TOSHIBA 0x0098
@@ -124,6 +125,9 @@
#define PM49FL004 0x006E
#define PM49FL008 0x006A
+/* Sharp */
+#define LH28F640BF 0x00b0
+
/* ST - www.st.com */
#define M29W800DT 0x00D7
#define M29W800DB 0x005B
@@ -1267,6 +1271,19 @@
.regions = {
ERASEINFO( 0x01000, 256 )
}
+ }, {
+ .mfr_id = MANUFACTURER_SHARP,
+ .dev_id = LH28F640BF,
+ .name = "LH28F640BF",
+ .uaddr = {
+ [0] = MTD_UADDR_UNNECESSARY, /* x8 */
+ },
+ .DevSize = SIZE_4MiB,
+ .CmdSet = P_ID_INTEL_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x40000,16),
+ }
}, {
.mfr_id = MANUFACTURER_SST,
.dev_id = SST39LF512,
@@ -2035,7 +2052,7 @@
DEBUG(MTD_DEBUG_LEVEL3,
"Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
- for (i=0; i<sizeof(jedec_table)/sizeof(jedec_table[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
DEBUG( MTD_DEBUG_LEVEL3,
"MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c
index 36f61a6..3cc0b23 100644
--- a/drivers/mtd/chips/sharp.c
+++ b/drivers/mtd/chips/sharp.c
@@ -64,7 +64,7 @@
#undef AUTOUNLOCK /* automatically unlocks blocks before erasing */
-struct mtd_info *sharp_probe(struct map_info *);
+static struct mtd_info *sharp_probe(struct map_info *);
static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd);
@@ -96,7 +96,6 @@
struct flchip chips[1];
};
-struct mtd_info *sharp_probe(struct map_info *map);
static void sharp_destroy(struct mtd_info *mtd);
static struct mtd_chip_driver sharp_chipdrv = {
@@ -107,7 +106,7 @@
};
-struct mtd_info *sharp_probe(struct map_info *map)
+static struct mtd_info *sharp_probe(struct map_info *map)
{
struct mtd_info *mtd = NULL;
struct sharp_info *sharp = NULL;
@@ -581,7 +580,7 @@
}
-int __init sharp_probe_init(void)
+static int __init sharp_probe_init(void)
{
printk("MTD Sharp chip driver <ds@lineo.com>\n");
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 6b8bb2e..a7a7bfe 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -42,7 +42,8 @@
/* special size referring to all the remaining space in a partition */
-#define SIZE_REMAINING 0xffffffff
+#define SIZE_REMAINING UINT_MAX
+#define OFFSET_CONTINUOUS UINT_MAX
struct cmdline_mtd_partition {
struct cmdline_mtd_partition *next;
@@ -75,7 +76,7 @@
{
struct mtd_partition *parts;
unsigned long size;
- unsigned long offset = 0;
+ unsigned long offset = OFFSET_CONTINUOUS;
char *name;
int name_len;
unsigned char *extra_mem;
@@ -314,7 +315,7 @@
{
for(i = 0, offset = 0; i < part->num_parts; i++)
{
- if (!part->parts[i].offset)
+ if (part->parts[i].offset == OFFSET_CONTINUOUS)
part->parts[i].offset = offset;
else
offset = part->parts[i].offset;
diff --git a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c
index 04f864d..79f2e1f 100644
--- a/drivers/mtd/devices/blkmtd.c
+++ b/drivers/mtd/devices/blkmtd.c
@@ -28,8 +28,9 @@
#include <linux/pagemap.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/mount.h>
#include <linux/mtd/mtd.h>
-
+#include <linux/mutex.h>
#define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg)
@@ -46,7 +47,7 @@
struct list_head list;
struct block_device *blkdev;
struct mtd_info mtd_info;
- struct semaphore wrbuf_mutex;
+ struct mutex wrbuf_mutex;
};
@@ -268,7 +269,7 @@
if(end_len)
pagecnt++;
- down(&dev->wrbuf_mutex);
+ mutex_lock(&dev->wrbuf_mutex);
DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n",
start_len, len, end_len, pagecnt);
@@ -376,7 +377,7 @@
blkmtd_write_out(bio);
DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err);
- up(&dev->wrbuf_mutex);
+ mutex_unlock(&dev->wrbuf_mutex);
if(retlen)
*retlen = thislen;
@@ -614,8 +615,6 @@
}
-extern dev_t __init name_to_dev_t(const char *line);
-
static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size)
{
struct block_device *bdev;
@@ -659,7 +658,7 @@
memset(dev, 0, sizeof(struct blkmtd_dev));
dev->blkdev = bdev;
if(!readonly) {
- init_MUTEX(&dev->wrbuf_mutex);
+ mutex_init(&dev->wrbuf_mutex);
}
dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 7ff403b..4160b83 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/buffer_head.h>
+#include <linux/mutex.h>
#define VERSION "$Revision: 1.30 $"
@@ -31,7 +32,7 @@
struct list_head list;
struct block_device *blkdev;
struct mtd_info mtd;
- struct semaphore write_mutex;
+ struct mutex write_mutex;
};
@@ -134,9 +135,9 @@
int err;
instr->state = MTD_ERASING;
- down(&dev->write_mutex);
+ mutex_lock(&dev->write_mutex);
err = _block2mtd_erase(dev, from, len);
- up(&dev->write_mutex);
+ mutex_unlock(&dev->write_mutex);
if (err) {
ERROR("erase failed err = %d", err);
instr->state = MTD_ERASE_FAILED;
@@ -249,9 +250,9 @@
if (to + len > mtd->size)
len = mtd->size - to;
- down(&dev->write_mutex);
+ mutex_lock(&dev->write_mutex);
err = _block2mtd_write(dev, buf, to, len, retlen);
- up(&dev->write_mutex);
+ mutex_unlock(&dev->write_mutex);
if (err > 0)
err = 0;
return err;
@@ -310,7 +311,7 @@
goto devinit_err;
}
- init_MUTEX(&dev->write_mutex);
+ mutex_init(&dev->write_mutex);
/* Setup the MTD structure */
/* make the name contain the block device in */
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index e4345cf..23e7a5c 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/bitops.h>
+#include <linux/mutex.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -605,7 +606,7 @@
this->curfloor = -1;
this->curchip = -1;
- init_MUTEX(&this->lock);
+ mutex_init(&this->lock);
/* Ident all the chips present. */
DoC_ScanChips(this, maxchips);
@@ -645,7 +646,7 @@
if (from >= this->totlen)
return -EINVAL;
- down(&this->lock);
+ mutex_lock(&this->lock);
*retlen = 0;
while (left) {
@@ -774,7 +775,7 @@
buf += len;
}
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -803,7 +804,7 @@
if (to >= this->totlen)
return -EINVAL;
- down(&this->lock);
+ mutex_lock(&this->lock);
*retlen = 0;
while (left) {
@@ -873,7 +874,7 @@
printk(KERN_ERR "Error programming flash\n");
/* Error in programming */
*retlen = 0;
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EIO;
}
@@ -935,7 +936,7 @@
printk(KERN_ERR "Error programming flash\n");
/* Error in programming */
*retlen = 0;
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EIO;
}
@@ -956,7 +957,7 @@
ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x);
if (ret) {
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
}
@@ -966,7 +967,7 @@
buf += len;
}
- up(&this->lock);
+ mutex_unlock(&this->lock);
return 0;
}
@@ -975,13 +976,13 @@
u_char *eccbuf, struct nand_oobinfo *oobsel)
{
static char static_buf[512];
- static DECLARE_MUTEX(writev_buf_sem);
+ static DEFINE_MUTEX(writev_buf_mutex);
size_t totretlen = 0;
size_t thisvecofs = 0;
int ret= 0;
- down(&writev_buf_sem);
+ mutex_lock(&writev_buf_mutex);
while(count) {
size_t thislen, thisretlen;
@@ -1024,7 +1025,7 @@
to += thislen;
}
- up(&writev_buf_sem);
+ mutex_unlock(&writev_buf_mutex);
*retlen = totretlen;
return ret;
}
@@ -1037,7 +1038,7 @@
int len256 = 0, ret;
struct Nand *mychip;
- down(&this->lock);
+ mutex_lock(&this->lock);
mychip = &this->chips[ofs >> this->chipshift];
@@ -1083,7 +1084,7 @@
ret = DoC_WaitReady(this);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -1197,10 +1198,10 @@
struct DiskOnChip *this = mtd->priv;
int ret;
- down(&this->lock);
+ mutex_lock(&this->lock);
ret = doc_write_oob_nolock(mtd, ofs, len, retlen, buf);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -1214,10 +1215,10 @@
struct Nand *mychip;
int status;
- down(&this->lock);
+ mutex_lock(&this->lock);
if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) {
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EINVAL;
}
@@ -1265,7 +1266,7 @@
callback:
mtd_erase_callback(instr);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return 0;
}
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1e876fc..29b0dda 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -581,8 +581,6 @@
/***************************************************************************************************/
-#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
-
static struct mtd_info mtd;
static struct mtd_erase_region_info erase_regions[] = {
@@ -640,7 +638,7 @@
mtd.flags = MTD_CAP_NORFLASH;
mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
- mtd.numeraseregions = NB_OF (erase_regions);
+ mtd.numeraseregions = ARRAY_SIZE(erase_regions);
mtd.eraseregions = erase_regions;
mtd.erase = flash_erase;
mtd.read = flash_read;
@@ -670,9 +668,9 @@
result,mtd.eraseregions[result].numblocks);
#ifdef HAVE_PARTITIONS
- printk ("\npartitions = %d\n",NB_OF (lart_partitions));
+ printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
- for (result = 0; result < NB_OF (lart_partitions); result++)
+ for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
printk (KERN_DEBUG
"\n\n"
"lart_partitions[%d].name = %s\n"
@@ -687,7 +685,7 @@
#ifndef HAVE_PARTITIONS
result = add_mtd_device (&mtd);
#else
- result = add_mtd_partitions (&mtd,lart_partitions,NB_OF (lart_partitions));
+ result = add_mtd_partitions (&mtd,lart_partitions, ARRAY_SIZE(lart_partitions));
#endif
return (result);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index d5f2408..04e65d5 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -186,7 +186,7 @@
struct m25p *flash = mtd_to_m25p(mtd);
u32 addr,len;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
flash->spi->dev.bus_id, __FUNCTION__, "at",
(u32)instr->addr, instr->len);
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 0ff2e43..485f663 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -308,7 +308,7 @@
break;
}
- for (i = 0; i < (sizeof(ms02nv_addrs) / sizeof(*ms02nv_addrs)); i++)
+ for (i = 0; i < ARRAY_SIZE(ms02nv_addrs); i++)
if (!ms02nv_init_one(ms02nv_addrs[i] << stride))
count++;
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 8a54489..a3b9247 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -47,9 +47,6 @@
*/
#define MAX_LOOPS 10000
-extern void INFTL_dumptables(struct INFTLrecord *inftl);
-extern void INFTL_dumpVUchains(struct INFTLrecord *inftl);
-
static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
struct INFTLrecord *inftl;
@@ -132,7 +129,7 @@
return;
}
#ifdef PSYCHO_DEBUG
- printk(KERN_INFO "INFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a');
+ printk(KERN_INFO "INFTL: Found new inftl%c\n", inftl->mbd.devnum + 'a');
#endif
return;
}
@@ -885,8 +882,6 @@
.owner = THIS_MODULE,
};
-extern char inftlmountrev[];
-
static int __init init_inftl(void)
{
printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
index a57791a..b933a2a 100644
--- a/drivers/mtd/maps/alchemy-flash.c
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -126,8 +126,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
static struct mtd_info *mymtd;
int __init alchemy_mtd_init(void)
@@ -154,7 +152,7 @@
* Static partition definition selection
*/
parts = alchemy_partitions;
- nb_parts = NB_OF(alchemy_partitions);
+ nb_parts = ARRAY_SIZE(alchemy_partitions);
alchemy_map.size = window_size;
/*
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 6a8c041..fd0f0d3 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -86,7 +86,7 @@
}
};
-#define PARTITION_COUNT (sizeof(flagadm_parts)/sizeof(struct mtd_partition))
+#define PARTITION_COUNT ARRAY_SIZE(flagadm_parts)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 49d9054..652813c 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -57,7 +57,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(partition_info) / sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#define WINDOW_ADDR 0x10000000
#define WINDOW_SIZE 0x800000
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index efb2216..c299d10 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -300,7 +300,7 @@
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
static struct mtd_info *mymtd;
static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
@@ -345,7 +345,7 @@
},
};
-#define NUM_HIGHLVL_PARTITIONS (sizeof(higlvl_partition_info)/sizeof(partition_info[0]))
+#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info)
static int dnp_adnp_probe(void)
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index b993ac0..2bb3c0f 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -99,7 +99,7 @@
static int __init init_svme182(void)
{
struct mtd_partition *partitions;
- int num_parts = sizeof(svme182_partitions) / sizeof(struct mtd_partition);
+ int num_parts = ARRAY_SIZE(svme182_partitions);
partitions = svme182_partitions;
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 3190948..0667101 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -59,7 +59,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(h720x_partitions)/sizeof(h720x_partitions[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
static int nr_mtd_parts;
static struct mtd_partition *mtd_parts;
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 33060a3..ed21547 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -76,7 +76,7 @@
.size = 0x80000
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#define WINDOW_SIZE 0x00100000
#define WINDOW_ADDR 0x00200000
@@ -88,7 +88,7 @@
.phys = WINDOW_ADDR,
};
-#define NUM_FLASH_BANKS (sizeof(netsc520_map)/sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(netsc520_map)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 632eb2a..54a3102 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -128,8 +128,7 @@
}
};
-#define NUM_AMD_PARTITIONS \
- (sizeof(nettel_amd_partitions)/sizeof(nettel_amd_partitions[0]))
+#define NUM_AMD_PARTITIONS ARRAY_SIZE(nettel_amd_partitions)
/****************************************************************************/
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
index c223514..a21fcd1 100644
--- a/drivers/mtd/maps/ocotea.c
+++ b/drivers/mtd/maps/ocotea.c
@@ -58,8 +58,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
int __init init_ocotea(void)
{
u8 fpga0_reg;
@@ -97,7 +95,7 @@
if (flash) {
flash->owner = THIS_MODULE;
add_mtd_partitions(flash, ocotea_small_partitions,
- NB_OF(ocotea_small_partitions));
+ ARRAY_SIZE(ocotea_small_partitions));
} else {
printk("map probe failed for flash\n");
return -ENXIO;
@@ -118,7 +116,7 @@
if (flash) {
flash->owner = THIS_MODULE;
add_mtd_partitions(flash, ocotea_large_partitions,
- NB_OF(ocotea_large_partitions));
+ ARRAY_SIZE(ocotea_large_partitions));
} else {
printk("map probe failed for flash\n");
return -ENXIO;
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 21822c2..d2ab1ba 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -334,9 +334,6 @@
return 0;
release:
- if (mtd)
- map_destroy(mtd);
-
if (map) {
map->exit(dev, map);
kfree(map);
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index f988c81..8bbc751 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -616,7 +616,7 @@
} else if(mem_type == 2) {
mtd = do_map_probe("map_rom", &dev->pcmcia_map);
} else {
- for(i = 0; i < sizeof(probes) / sizeof(char *); i++) {
+ for(i = 0; i < ARRAY_SIZE(probes); i++) {
DEBUG(1, "Trying %s", probes[i]);
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 5b76ed8..50b1403 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -121,8 +121,7 @@
};
-#define NUM_REDWOOD_FLASH_PARTITIONS \
- (sizeof(redwood_flash_partitions)/sizeof(redwood_flash_partitions[0]))
+#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
static struct mtd_info *redwood_mtd;
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index 225cdd9..350286d 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -66,7 +66,7 @@
}
};
-#define NUM_FLASH_BANKS (sizeof(sbc8240_map) / sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
/*
* The following defines the partition layout of SBC8240 boards.
@@ -125,8 +125,6 @@
}
};
-#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
-
/* trivial struct to describe partition information */
struct mtd_part_def
{
@@ -190,10 +188,10 @@
#ifdef CONFIG_MTD_PARTITIONS
sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = NB_OF(sbc8240_uboot_partitions);
+ sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = NB_OF(sbc8240_fs_partitions);
+ sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
for (i = 0; i < NUM_FLASH_BANKS; i++) {
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index ed92afa..e8c130e 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -107,7 +107,7 @@
},
};
-#define NUM_FLASH_BANKS (sizeof(sc520cdp_map)/sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(sc520cdp_map)
static struct mtd_info *mymtd[NUM_FLASH_BANKS];
static struct mtd_info *merged_mtd;
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 2c91dff..28b8a57 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -70,7 +70,7 @@
.size = 0x80000
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#endif
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 999f4bb..12fe53c 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -49,8 +49,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
int __init init_sharpsl(void)
{
struct mtd_partition *parts;
@@ -92,7 +90,7 @@
}
parts = sharpsl_partitions;
- nb_parts = NB_OF(sharpsl_partitions);
+ nb_parts = ARRAY_SIZE(sharpsl_partitions);
printk(KERN_NOTICE "Using %s partision definition\n", part_type);
add_mtd_partitions(mymtd, parts, nb_parts);
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index 4b372bc..a7422c2 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -64,7 +64,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(ts5500_partitions)/sizeof(struct mtd_partition))
+#define NUM_PARTITIONS ARRAY_SIZE(ts5500_partitions)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 79d9280..f7264dc 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -37,7 +37,7 @@
{ .name = "ROMfs" }
};
-#define NUM_PARTITIONS (sizeof(uclinux_romfs) / sizeof(uclinux_romfs[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(uclinux_romfs)
/****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index e006394..b3e4873 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -182,7 +182,7 @@
}
}
- if (!vmax_mtd[1] && !vmax_mtd[2]) {
+ if (!vmax_mtd[0] && !vmax_mtd[1]) {
iounmap((void *)iomapadr);
return -ENXIO;
}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 840dd66..458d3c8 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -19,12 +19,12 @@
#include <linux/spinlock.h>
#include <linux/hdreg.h>
#include <linux/init.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
static LIST_HEAD(blktrans_majors);
-extern struct semaphore mtd_table_mutex;
+extern struct mutex mtd_table_mutex;
extern struct mtd_info *mtd_table[];
struct mtd_blkcore_priv {
@@ -122,9 +122,9 @@
spin_unlock_irq(rq->queue_lock);
- down(&dev->sem);
+ mutex_lock(&dev->lock);
res = do_blktrans_request(tr, dev, req);
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
spin_lock_irq(rq->queue_lock);
@@ -235,8 +235,8 @@
int last_devnum = -1;
struct gendisk *gd;
- if (!down_trylock(&mtd_table_mutex)) {
- up(&mtd_table_mutex);
+ if (!!mutex_trylock(&mtd_table_mutex)) {
+ mutex_unlock(&mtd_table_mutex);
BUG();
}
@@ -267,7 +267,7 @@
return -EBUSY;
}
- init_MUTEX(&new->sem);
+ mutex_init(&new->lock);
list_add_tail(&new->list, &tr->devs);
added:
if (!tr->writesect)
@@ -313,8 +313,8 @@
int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
{
- if (!down_trylock(&mtd_table_mutex)) {
- up(&mtd_table_mutex);
+ if (!!mutex_trylock(&mtd_table_mutex)) {
+ mutex_unlock(&mtd_table_mutex);
BUG();
}
@@ -378,14 +378,14 @@
memset(tr->blkcore_priv, 0, sizeof(*tr->blkcore_priv));
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
ret = register_blkdev(tr->major, tr->name);
if (ret) {
printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
tr->name, tr->major, ret);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
spin_lock_init(&tr->blkcore_priv->queue_lock);
@@ -396,7 +396,7 @@
if (!tr->blkcore_priv->rq) {
unregister_blkdev(tr->major, tr->name);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return -ENOMEM;
}
@@ -407,7 +407,7 @@
blk_cleanup_queue(tr->blkcore_priv->rq);
unregister_blkdev(tr->major, tr->name);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -419,7 +419,7 @@
tr->add_mtd(tr, mtd_table[i]);
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 0;
}
@@ -428,7 +428,7 @@
{
struct list_head *this, *next;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
/* Clean up the kernel thread */
tr->blkcore_priv->exiting = 1;
@@ -446,7 +446,7 @@
blk_cleanup_queue(tr->blkcore_priv->rq);
unregister_blkdev(tr->major, tr->name);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
kfree(tr->blkcore_priv);
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index e847566..2cef280 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -19,11 +19,13 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
+#include <linux/mutex.h>
+
static struct mtdblk_dev {
struct mtd_info *mtd;
int count;
- struct semaphore cache_sem;
+ struct mutex cache_mutex;
unsigned char *cache_data;
unsigned long cache_offset;
unsigned int cache_size;
@@ -284,7 +286,7 @@
mtdblk->count = 1;
mtdblk->mtd = mtd;
- init_MUTEX (&mtdblk->cache_sem);
+ mutex_init(&mtdblk->cache_mutex);
mtdblk->cache_state = STATE_EMPTY;
if ((mtdblk->mtd->flags & MTD_CAP_RAM) != MTD_CAP_RAM &&
mtdblk->mtd->erasesize) {
@@ -306,9 +308,9 @@
DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
- down(&mtdblk->cache_sem);
+ mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
- up(&mtdblk->cache_sem);
+ mutex_unlock(&mtdblk->cache_mutex);
if (!--mtdblk->count) {
/* It was the last usage. Free the device */
@@ -327,9 +329,9 @@
{
struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
- down(&mtdblk->cache_sem);
+ mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
- up(&mtdblk->cache_sem);
+ mutex_unlock(&mtdblk->cache_mutex);
if (mtdblk->mtd->sync)
mtdblk->mtd->sync(mtdblk->mtd);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index dade02a..9905870 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -19,15 +19,13 @@
#include <linux/ioctl.h>
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
-#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
-#endif
#include <linux/mtd/mtd.h>
/* These are exported solely for the purpose of mtd_blkdevs.c. You
should not use them for _anything_ else */
-DECLARE_MUTEX(mtd_table_mutex);
+DEFINE_MUTEX(mtd_table_mutex);
struct mtd_info *mtd_table[MAX_MTD_DEVICES];
EXPORT_SYMBOL_GPL(mtd_table_mutex);
@@ -49,7 +47,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
for (i=0; i < MAX_MTD_DEVICES; i++)
if (!mtd_table[i]) {
@@ -67,7 +65,7 @@
not->add(mtd);
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
/* We _know_ we aren't being removed, because
our caller is still holding us here. So none
of this try_ nonsense, and no bitching about it
@@ -76,7 +74,7 @@
return 0;
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 1;
}
@@ -94,7 +92,7 @@
{
int ret;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
if (mtd_table[mtd->index] != mtd) {
ret = -ENODEV;
@@ -118,7 +116,7 @@
ret = 0;
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -135,7 +133,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
list_add(&new->list, &mtd_notifiers);
@@ -145,7 +143,7 @@
if (mtd_table[i])
new->add(mtd_table[i]);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
}
/**
@@ -162,7 +160,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
module_put(THIS_MODULE);
@@ -171,7 +169,7 @@
old->remove(mtd_table[i]);
list_del(&old->list);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 0;
}
@@ -193,7 +191,7 @@
struct mtd_info *ret = NULL;
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
if (num == -1) {
for (i=0; i< MAX_MTD_DEVICES; i++)
@@ -211,7 +209,7 @@
if (ret)
ret->usecount++;
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -219,9 +217,9 @@
{
int c;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
c = --mtd->usecount;
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
BUG_ON(c < 0);
module_put(mtd->owner);
@@ -296,10 +294,11 @@
EXPORT_SYMBOL(default_mtd_writev);
EXPORT_SYMBOL(default_mtd_readv);
+#ifdef CONFIG_PROC_FS
+
/*====================================================================*/
/* Support for /proc/mtd */
-#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_mtd;
static inline int mtd_proc_info (char *buf, int i)
@@ -319,7 +318,7 @@
int len, l, i;
off_t begin = 0;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
len = sprintf(page, "dev: size erasesize name\n");
for (i=0; i< MAX_MTD_DEVICES; i++) {
@@ -337,38 +336,34 @@
*eof = 1;
done:
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
if (off >= len+begin)
return 0;
*start = page + (off-begin);
return ((count < begin+len-off) ? count : begin+len-off);
}
-#endif /* CONFIG_PROC_FS */
-
/*====================================================================*/
/* Init code */
static int __init init_mtd(void)
{
-#ifdef CONFIG_PROC_FS
if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
proc_mtd->read_proc = mtd_read_proc;
-#endif
return 0;
}
static void __exit cleanup_mtd(void)
{
-#ifdef CONFIG_PROC_FS
if (proc_mtd)
remove_proc_entry( "mtd", NULL);
-#endif
}
module_init(init_mtd);
module_exit(cleanup_mtd);
+#endif /* CONFIG_PROC_FS */
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1fc4c13..cfe288a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -178,17 +178,16 @@
Even if you leave this disabled, you can enable BBT writes at module
load time (assuming you build diskonchip as a module) with the module
parameter "inftl_bbt_write=1".
-
- config MTD_NAND_SHARPSL
- bool "Support for NAND Flash on Sharp SL Series (C7xx + others)"
- depends on MTD_NAND && ARCH_PXA
-
- config MTD_NAND_NANDSIM
- bool "Support for NAND Flash Simulator"
- depends on MTD_NAND && MTD_PARTITIONS
+config MTD_NAND_SHARPSL
+ tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ depends on MTD_NAND && ARCH_PXA
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ depends on MTD_NAND && MTD_PARTITIONS
help
The simulator may simulate verious NAND flash chips for the
MTD nand layer.
-
+
endmenu
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 201e136..bde3550 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -55,8 +55,6 @@
.size = MTDPART_SIZ_FULL
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
/**
* au_read_byte - read one byte from the chip
@@ -462,7 +460,7 @@
}
/* Register the partitions */
- add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
+ add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info));
return 0;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5d22246..95e96fa 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -80,6 +80,7 @@
#include <linux/mtd/compatmac.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
+#include <linux/leds.h>
#include <asm/io.h>
#ifdef CONFIG_MTD_PARTITIONS
@@ -515,6 +516,8 @@
return nand_isbad_bbt (mtd, ofs, allowbbt);
}
+DEFINE_LED_TRIGGER(nand_led_trigger);
+
/*
* Wait for the ready pin, after a command
* The timeout is catched later.
@@ -524,12 +527,14 @@
struct nand_chip *this = mtd->priv;
unsigned long timeo = jiffies + 2;
+ led_trigger_event(nand_led_trigger, LED_FULL);
/* wait until command is processed or timeout occures */
do {
if (this->dev_ready(mtd))
- return;
+ break;
touch_softlockup_watchdog();
} while (time_before(jiffies, timeo));
+ led_trigger_event(nand_led_trigger, LED_OFF);
}
/**
@@ -817,6 +822,8 @@
else
timeo += (HZ * 20) / 1000;
+ led_trigger_event(nand_led_trigger, LED_FULL);
+
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
ndelay (100);
@@ -840,6 +847,8 @@
}
cond_resched();
}
+ led_trigger_event(nand_led_trigger, LED_OFF);
+
status = (int) this->read_byte(mtd);
return status;
}
@@ -2724,6 +2733,21 @@
EXPORT_SYMBOL_GPL (nand_scan);
EXPORT_SYMBOL_GPL (nand_release);
+
+static int __init nand_base_init(void)
+{
+ led_trigger_register_simple("nand-disk", &nand_led_trigger);
+ return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+ led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
MODULE_LICENSE ("GPL");
MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
MODULE_DESCRIPTION ("Generic NAND flash driver code");
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 8815c8d..c077d2e 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -85,10 +85,6 @@
numslots = (master->erasesize / sizeof(struct fis_image_desc));
for (i = 0; i < numslots; i++) {
- if (buf[i].name[0] == 0xff) {
- i = numslots;
- break;
- }
if (!memcmp(buf[i].name, "FIS directory", 14)) {
/* This is apparently the FIS directory entry for the
* FIS directory itself. The FIS directory size is
@@ -128,7 +124,7 @@
struct fis_list *new_fl, **prev;
if (buf[i].name[0] == 0xff)
- break;
+ continue;
if (!redboot_checksum(&buf[i]))
break;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 70f6389..274b013 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -788,7 +788,7 @@
int options; /* User-settable misc. driver options. */
unsigned int media_override:4, /* Passed-in media type. */
default_media:4, /* Read from the EEPROM/Wn3_Config. */
- full_duplex:1, force_fd:1, autoselect:1,
+ full_duplex:1, autoselect:1,
bus_master:1, /* Vortex can only do a fragment bus-m. */
full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */
flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */
@@ -1633,12 +1633,6 @@
((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
0x100 : 0),
ioaddr + Wn3_MAC_Ctrl);
-
- issue_and_wait(dev, TxReset);
- /*
- * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
- */
- issue_and_wait(dev, RxReset|0x04);
}
static void vortex_check_media(struct net_device *dev, unsigned int init)
@@ -1663,7 +1657,7 @@
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
unsigned int config;
- int i;
+ int i, mii_reg1, mii_reg5;
if (VORTEX_PCI(vp)) {
pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
@@ -1723,14 +1717,23 @@
printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
- netif_carrier_off(dev);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
EL3WINDOW(4);
+ mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
+ mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
+ vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
+
vortex_check_media(dev, 1);
}
else
vortex_set_duplex(dev);
+ issue_and_wait(dev, TxReset);
+ /*
+ * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+ */
+ issue_and_wait(dev, RxReset|0x04);
+
iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
@@ -2083,16 +2086,14 @@
}
if (tx_status & 0x14) vp->stats.tx_fifo_errors++;
if (tx_status & 0x38) vp->stats.tx_aborted_errors++;
+ if (tx_status & 0x08) vp->xstats.tx_max_collisions++;
iowrite8(0, ioaddr + TxStatus);
if (tx_status & 0x30) { /* txJabber or txUnderrun */
do_tx_reset = 1;
- } else if (tx_status & 0x08) { /* maxCollisions */
- vp->xstats.tx_max_collisions++;
- if (vp->drv_flags & MAX_COLLISION_RESET) {
- do_tx_reset = 1;
- reset_mask = 0x0108; /* Reset interface logic, but not download logic */
- }
- } else { /* Merely re-enable the transmitter. */
+ } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */
+ do_tx_reset = 1;
+ reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ } else { /* Merely re-enable the transmitter. */
iowrite16(TxEnable, ioaddr + EL3_CMD);
}
}
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 599b68d..51e39dc 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -134,7 +134,7 @@
#define inb_p(_p) inb(_p)
#define outb_p(_v,_p) outb(_v,_p)
-#elif defined(CONFIG_NET_CBUS) || defined(CONFIG_NE_H8300) || defined(CONFIG_NE_H8300_MODULE)
+#elif defined(CONFIG_NE_H8300) || defined(CONFIG_NE_H8300_MODULE)
#define EI_SHIFT(x) (ei_local->reg_offset[x])
#else
#define EI_SHIFT(x) (x)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e20b849..bdaaad8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2313,13 +2313,11 @@
endmenu
-if !UML
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
source "drivers/net/pcmcia/Kconfig"
-endif
source "drivers/net/wan/Kconfig"
diff --git a/drivers/net/acenic_firmware.h b/drivers/net/acenic_firmware.h
index 6d625d5..d7882dd 100644
--- a/drivers/net/acenic_firmware.h
+++ b/drivers/net/acenic_firmware.h
@@ -4397,7 +4397,7 @@
0x3c010001, 0x220821, 0xac317e30, 0x8fbf0024,
0x8fb40020, 0x8fb3001c, 0x8fb20018, 0x8fb10014,
0x8fb00010, 0x3e00008, 0x27bd0028, 0x0 };
-static u32 tigonFwRodata[(MAX_RODATA_LEN/4) + 1] __initdata = {
+static u32 tigonFwRodata[(MAX_RODATA_LEN/4) + 1] __devinitdata = {
0x24486561, 0x6465723a, 0x202f7072,
0x6f6a6563, 0x74732f72, 0x63732f73, 0x772f6765,
0x2f2e2f6e, 0x69632f66, 0x772f636f, 0x6d6d6f6e,
@@ -4571,7 +4571,7 @@
0x0, 0x14c38, 0x14c38, 0x14b80,
0x14bc4, 0x14c38, 0x14c38, 0x0,
0x0, 0x0 };
-static u32 tigonFwData[(MAX_DATA_LEN/4) + 1] __initdata = {
+static u32 tigonFwData[(MAX_DATA_LEN/4) + 1] __devinitdata = {
0x416c7465,
0x6f6e2041, 0x63654e49, 0x43205600, 0x416c7465,
0x6f6e2041, 0x63654e49, 0x43205600, 0x42424242,
@@ -4612,7 +4612,7 @@
#define tigon2FwSbssLen 0xcc
#define tigon2FwBssAddr 0x00016f50
#define tigon2FwBssLen 0x20c0
-static u32 tigon2FwText[(MAX_TEXT_LEN/4) + 1] __initdata = {
+static u32 tigon2FwText[(MAX_TEXT_LEN/4) + 1] __devinitdata = {
0x0,
0x10000003, 0x0, 0xd, 0xd,
0x3c1d0001, 0x8fbd6d20, 0x3a0f021, 0x3c100000,
@@ -9154,7 +9154,7 @@
0x24020001, 0x8f430328, 0x1021, 0x24630001,
0x3e00008, 0xaf430328, 0x3e00008, 0x0,
0x0, 0x0, 0x0, 0x0 };
-static u32 tigon2FwRodata[(MAX_RODATA_LEN/4) + 1] __initdata = {
+static u32 tigon2FwRodata[(MAX_RODATA_LEN/4) + 1] __devinitdata = {
0x24486561, 0x6465723a, 0x202f7072,
0x6f6a6563, 0x74732f72, 0x63732f73, 0x772f6765,
0x2f2e2f6e, 0x69632f66, 0x77322f63, 0x6f6d6d6f,
@@ -9425,7 +9425,7 @@
0x14ed8, 0x14b8c, 0x14bd8, 0x14c24,
0x14ed8, 0x7365746d, 0x61636163, 0x74000000,
0x0, 0x0 };
-static u32 tigon2FwData[(MAX_DATA_LEN/4) + 1] __initdata = {
+static u32 tigon2FwData[(MAX_DATA_LEN/4) + 1] __devinitdata = {
0x1,
0x1, 0x1, 0xc001fc, 0x3ffc,
0xc00000, 0x416c7465, 0x6f6e2041, 0x63654e49,
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index c3267e4..15032f2 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1339,6 +1339,9 @@
if (netif_running(dev))
return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
spin_lock_irq(&bp->lock);
@@ -1876,6 +1879,12 @@
bp->dev->dev_addr[3] = eeprom[80];
bp->dev->dev_addr[4] = eeprom[83];
bp->dev->dev_addr[5] = eeprom[82];
+
+ if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
+ printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
+ return -EINVAL;
+ }
+
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
bp->phy_addr = eeprom[90] & 0x1f;
@@ -2033,6 +2042,11 @@
pci_save_state(bp->pdev);
+ /* Chip reset provides power to the b44 MAC & PCI cores, which
+ * is necessary for MAC register access.
+ */
+ b44_chip_reset(bp);
+
printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i],
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index f3f5825..6a40707 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2294,6 +2294,34 @@
port->sm_vars |= AD_PORT_BEGIN;
}
+/*
+ * set link state for bonding master: if we have an active partnered
+ * aggregator, we're up, if not, we're down. Presumes that we cannot
+ * have an active aggregator if there are no slaves with link up.
+ *
+ * Called by bond_set_carrier(). Return zero if carrier state does not
+ * change, nonzero if it does.
+ */
+int bond_3ad_set_carrier(struct bonding *bond)
+{
+ struct aggregator *agg;
+
+ agg = __get_active_agg(&(SLAVE_AD_INFO(bond->first_slave).aggregator));
+ if (agg && MAC_ADDRESS_COMPARE(&agg->partner_system, &null_mac_addr)) {
+ if (!netif_carrier_ok(bond->dev)) {
+ netif_carrier_on(bond->dev);
+ return 1;
+ }
+ return 0;
+ }
+
+ if (netif_carrier_ok(bond->dev)) {
+ netif_carrier_off(bond->dev);
+ return 1;
+ }
+ return 0;
+}
+
/**
* bond_3ad_get_active_agg_info - get information of the active aggregator
* @bond: bonding struct to work on
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index 5ee2cef..6ad5ad6 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -283,5 +283,6 @@
int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
+int bond_3ad_set_carrier(struct bonding *bond);
#endif //__BOND_3AD_H__
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index f13a539..55d2367 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -559,6 +559,42 @@
/*------------------------------- Link status -------------------------------*/
/*
+ * Set the carrier state for the master according to the state of its
+ * slaves. If any slaves are up, the master is up. In 802.3ad mode,
+ * do special 802.3ad magic.
+ *
+ * Returns zero if carrier state does not change, nonzero if it does.
+ */
+static int bond_set_carrier(struct bonding *bond)
+{
+ struct slave *slave;
+ int i;
+
+ if (bond->slave_cnt == 0)
+ goto down;
+
+ if (bond->params.mode == BOND_MODE_8023AD)
+ return bond_3ad_set_carrier(bond);
+
+ bond_for_each_slave(bond, slave, i) {
+ if (slave->link == BOND_LINK_UP) {
+ if (!netif_carrier_ok(bond->dev)) {
+ netif_carrier_on(bond->dev);
+ return 1;
+ }
+ return 0;
+ }
+ }
+
+down:
+ if (netif_carrier_ok(bond->dev)) {
+ netif_carrier_off(bond->dev);
+ return 1;
+ }
+ return 0;
+}
+
+/*
* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
* values are invalid, fake speed and duplex to 100/Full
@@ -1074,10 +1110,24 @@
void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
+ int rv;
best_slave = bond_find_best_slave(bond);
if (best_slave != bond->curr_active_slave) {
bond_change_active_slave(bond, best_slave);
+ rv = bond_set_carrier(bond);
+ if (!rv)
+ return;
+
+ if (netif_carrier_ok(bond->dev)) {
+ printk(KERN_INFO DRV_NAME
+ ": %s: first active interface up!\n",
+ bond->dev->name);
+ } else {
+ printk(KERN_INFO DRV_NAME ": %s: "
+ "now running without any active interface !\n",
+ bond->dev->name);
+ }
}
}
@@ -1458,10 +1508,14 @@
if (((!bond->curr_active_slave) ||
(bond->curr_active_slave->dev->priv_flags & IFF_SLAVE_INACTIVE)) &&
(new_slave->link != BOND_LINK_DOWN)) {
- dprintk("This is the first active slave\n");
/* first slave or no active slave yet, and this link
is OK, so make this interface the active one */
bond_change_active_slave(bond, new_slave);
+ printk(KERN_INFO DRV_NAME
+ ": %s: first active interface up!\n",
+ bond->dev->name);
+ netif_carrier_on(bond->dev);
+
} else {
dprintk("This is just a backup slave\n");
bond_set_slave_inactive_flags(new_slave);
@@ -1517,6 +1571,8 @@
break;
} /* switch(bond_mode) */
+ bond_set_carrier(bond);
+
write_unlock_bh(&bond->lock);
res = bond_create_slave_symlinks(bond_dev, slave_dev);
@@ -1656,18 +1712,12 @@
bond_alb_deinit_slave(bond, slave);
}
- if (oldcurrent == slave) {
+ if (oldcurrent == slave)
bond_select_active_slave(bond);
- if (!bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
- }
-
if (bond->slave_cnt == 0) {
+ bond_set_carrier(bond);
+
/* if the last slave was removed, zero the mac address
* of the master so it will be set by the application
* to the mac address of the first slave
@@ -1751,6 +1801,8 @@
write_lock_bh(&bond->lock);
+ netif_carrier_off(bond_dev);
+
if (bond->slave_cnt == 0) {
goto out;
}
@@ -2187,15 +2239,9 @@
bond_select_active_slave(bond);
- if (oldcurrent && !bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
-
write_unlock(&bond->curr_slave_lock);
- }
+ } else
+ bond_set_carrier(bond);
re_arm:
if (bond->params.miimon) {
@@ -2499,13 +2545,6 @@
bond_select_active_slave(bond);
- if (oldcurrent && !bond->curr_active_slave) {
- printk(KERN_INFO DRV_NAME
- ": %s: now running without any active "
- "interface !\n",
- bond_dev->name);
- }
-
write_unlock(&bond->curr_slave_lock);
}
@@ -2579,12 +2618,15 @@
bond->current_arp_slave = NULL;
}
+ bond_set_carrier(bond);
+
if (slave == bond->curr_active_slave) {
printk(KERN_INFO DRV_NAME
": %s: %s is up and now the "
"active interface\n",
bond_dev->name,
slave->dev->name);
+ netif_carrier_on(bond->dev);
} else {
printk(KERN_INFO DRV_NAME
": %s: backup interface %s is "
@@ -2844,7 +2886,8 @@
(curr) ? curr->dev->name : "None");
}
- seq_printf(seq, "MII Status: %s\n", (curr) ? "up" : "down");
+ seq_printf(seq, "MII Status: %s\n", netif_carrier_ok(bond->dev) ?
+ "up" : "down");
seq_printf(seq, "MII Polling Interval (ms): %d\n", bond->params.miimon);
seq_printf(seq, "Up Delay (ms): %d\n",
bond->params.updelay * bond->params.miimon);
@@ -4531,6 +4574,8 @@
if (newbond)
*newbond = bond_dev->priv;
+ netif_carrier_off(bond_dev);
+
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(bond_dev->priv);
goto done;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index ce9dc9b..0bdfe2c 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.0.2"
-#define DRV_RELDATE "February 21, 2006"
+#define DRV_VERSION "3.0.3"
+#define DRV_RELDATE "March 23, 2006"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 77f104a..fbc2d21 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -299,10 +299,7 @@
int i;
int err;
- if (RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192) {
- static void __too_many_rx_or_tx_buffers(void);
- __too_many_rx_or_tx_buffers();
- }
+ BUILD_BUG_ON(RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192);
printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION);
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 8d49998..7826afb 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -226,7 +226,7 @@
NATSEMI_PG1_NREGS)
#define NATSEMI_REGS_VER 1 /* v1 added RFDR registers */
#define NATSEMI_REGS_SIZE (NATSEMI_NREGS * sizeof(u32))
-#define NATSEMI_EEPROM_SIZE 24 /* 12 16-bit values */
+#define NATSEMI_DEF_EEPROM_SIZE 24 /* 12 16-bit values */
/* Buffer sizes:
* The nic writes 32-bit values, even if the upper bytes of
@@ -714,6 +714,8 @@
unsigned int iosize;
spinlock_t lock;
u32 msg_enable;
+ /* EEPROM data */
+ int eeprom_size;
};
static void move_int_phy(struct net_device *dev, int addr);
@@ -890,6 +892,7 @@
np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
np->hands_off = 0;
np->intr_status = 0;
+ np->eeprom_size = NATSEMI_DEF_EEPROM_SIZE;
/* Initial port:
* - If the nic was configured to use an external phy and if find_mii
@@ -2582,7 +2585,8 @@
static int get_eeprom_len(struct net_device *dev)
{
- return NATSEMI_EEPROM_SIZE;
+ struct netdev_private *np = netdev_priv(dev);
+ return np->eeprom_size;
}
static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -2669,15 +2673,20 @@
static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
{
struct netdev_private *np = netdev_priv(dev);
- u8 eebuf[NATSEMI_EEPROM_SIZE];
+ u8 *eebuf;
int res;
+ eebuf = kmalloc(np->eeprom_size, GFP_KERNEL);
+ if (!eebuf)
+ return -ENOMEM;
+
eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
spin_lock_irq(&np->lock);
res = netdev_get_eeprom(dev, eebuf);
spin_unlock_irq(&np->lock);
if (!res)
memcpy(data, eebuf+eeprom->offset, eeprom->len);
+ kfree(eebuf);
return res;
}
@@ -3033,9 +3042,10 @@
int i;
u16 *ebuf = (u16 *)buf;
void __iomem * ioaddr = ns_ioaddr(dev);
+ struct netdev_private *np = netdev_priv(dev);
/* eeprom_read reads 16 bits, and indexes by 16 bits */
- for (i = 0; i < NATSEMI_EEPROM_SIZE/2; i++) {
+ for (i = 0; i < np->eeprom_size/2; i++) {
ebuf[i] = eeprom_read(ioaddr, i);
/* The EEPROM itself stores data bit-swapped, but eeprom_read
* reads it back "sanely". So we swap it back here in order to
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index edd1b53..75b35ad 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -94,7 +94,7 @@
static int option_setup(char *opt)
{
configured = !netpoll_parse_options(&np, opt);
- return 0;
+ return 1;
}
__setup("netconsole=", option_setup);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index aa55813..1cc94b2 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -35,6 +35,7 @@
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
+#include <linux/crc32.h>
#include "../8390.h"
#include <pcmcia/cs_types.h>
@@ -1682,17 +1683,67 @@
return &ei_local->stat;
}
+/*
+ * Form the 64 bit 8390 multicast table from the linked list of addresses
+ * associated with this dev structure.
+ */
+
+static inline void make_mc_bits(u8 *bits, struct net_device *dev)
+{
+ struct dev_mc_list *dmi;
+ u32 crc;
+
+ for (dmi=dev->mc_list; dmi; dmi=dmi->next) {
+
+ crc = ether_crc(ETH_ALEN, dmi->dmi_addr);
+ /*
+ * The 8390 uses the 6 most significant bits of the
+ * CRC to index the multicast table.
+ */
+ bits[crc>>29] |= (1<<((crc>>26)&7));
+ }
+}
+
/**
* do_set_multicast_list - set/clear multicast filter
* @dev: net device for which multicast filter is adjusted
*
- * Set or clear the multicast filter for this adaptor. May be called
- * from a BH in 2.1.x. Must be called with lock held.
+ * Set or clear the multicast filter for this adaptor.
+ * Must be called with lock held.
*/
static void do_set_multicast_list(struct net_device *dev)
{
long e8390_base = dev->base_addr;
+ int i;
+ struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
+
+ if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) {
+ memset(ei_local->mcfilter, 0, 8);
+ if (dev->mc_list)
+ make_mc_bits(ei_local->mcfilter, dev);
+ } else {
+ /* set to accept-all */
+ memset(ei_local->mcfilter, 0xFF, 8);
+ }
+
+ /*
+ * DP8390 manuals don't specify any magic sequence for altering
+ * the multicast regs on an already running card. To be safe, we
+ * ensure multicast mode is off prior to loading up the new hash
+ * table. If this proves to be not enough, we can always resort
+ * to stopping the NIC, loading the table and then restarting.
+ */
+
+ if (netif_running(dev))
+ outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
+
+ outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
+ for(i = 0; i < 8; i++)
+ {
+ outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i));
+ }
+ outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD);
if(dev->flags&IFF_PROMISC)
outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR);
@@ -1794,12 +1845,6 @@
if(inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i])
printk(KERN_ERR "Hw. address read/write mismap %d\n",i);
}
- /*
- * Initialize the multicast list to accept-all. If we enable multicast
- * the higher levels can do the filtering.
- */
- for (i = 0; i < 8; i++)
- outb_p(0xff, e8390_base + EN1_MULT + i);
outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG);
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index eed4968..e8f849e 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1973,7 +1973,7 @@
MAYBE_SET(lockup_hack, 6);
#undef MAYBE_SET
- return 0;
+ return 1;
}
__setup("xirc2ps_cs=", setup_xirc2ps_cs);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 9595f74..07c31f1 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1167,8 +1167,8 @@
* station address PROM at the base address and programmed into the
* "Physical Address Registers" CSR12-14.
* As a precautionary measure, we read the PROM values and complain if
- * they disagree with the CSRs. Either way, we use the CSR values, and
- * double check that they are valid.
+ * they disagree with the CSRs. If they miscompare, and the PROM addr
+ * is valid, then the PROM addr is used.
*/
for (i = 0; i < 3; i++) {
unsigned int val;
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 1f5975a..43f5e86 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1442,7 +1442,7 @@
case SPIDER_NET_GRFAFLLINT: /* fallthrough */
case SPIDER_NET_GRMFLLINT:
if (netif_msg_intr(card) && net_ratelimit())
- pr_err("Spider RX RAM full, incoming packets "
+ pr_debug("Spider RX RAM full, incoming packets "
"might be discarded!\n");
spider_net_rx_irq_off(card);
tasklet_schedule(&card->rxram_full_tl);
@@ -2086,7 +2086,7 @@
spider_net_setup_netdev_ops(netdev);
- netdev->features = 0;
+ netdev->features = NETIF_F_HW_CSUM;
/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
* NETIF_F_HW_VLAN_FILTER */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b547332..964c096 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.54"
-#define DRV_MODULE_RELDATE "Mar 23, 2006"
+#define DRV_MODULE_VERSION "3.55"
+#define DRV_MODULE_RELDATE "Mar 27, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -497,33 +497,40 @@
unsigned long flags;
spin_lock_irqsave(&tp->indirect_lock, flags);
- pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
- pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
+ if (tp->write32 != tg3_write_indirect_reg32) {
+ tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off);
+ tw32_f(TG3PCI_MEM_WIN_DATA, val);
- /* Always leave this as zero. */
- pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ /* Always leave this as zero. */
+ tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ } else {
+ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
+ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
+
+ /* Always leave this as zero. */
+ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ }
spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
-static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val)
-{
- /* If no workaround is needed, write to mem space directly */
- if (tp->write32 != tg3_write_indirect_reg32)
- tw32(NIC_SRAM_WIN_BASE + off, val);
- else
- tg3_write_mem(tp, off, val);
-}
-
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
{
unsigned long flags;
spin_lock_irqsave(&tp->indirect_lock, flags);
- pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
- pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
+ if (tp->write32 != tg3_write_indirect_reg32) {
+ tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off);
+ *val = tr32(TG3PCI_MEM_WIN_DATA);
- /* Always leave this as zero. */
- pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ /* Always leave this as zero. */
+ tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ } else {
+ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
+ pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
+
+ /* Always leave this as zero. */
+ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
+ }
spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
@@ -1367,12 +1374,12 @@
}
}
+ tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
+
/* Finally, set the new power state. */
pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
udelay(100); /* Delay after power state change */
- tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
-
return 0;
}
@@ -3600,7 +3607,7 @@
int len)
{
#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG)
return (((u64) mapping + len) > DMA_40BIT_MASK);
return 0;
#else
@@ -6461,6 +6468,9 @@
{
struct tg3 *tp = (struct tg3 *) __opaque;
+ if (tp->irq_sync)
+ goto restart_timer;
+
spin_lock(&tp->lock);
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
@@ -6537,11 +6547,11 @@
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
u32 val;
- tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX,
- FWCMD_NICDRV_ALIVE2);
- tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
+ tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
+ FWCMD_NICDRV_ALIVE2);
+ tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
/* 5 seconds timeout */
- tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
+ tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
val = tr32(GRC_RX_CPU_EVENT);
val |= (1 << 14);
tw32(GRC_RX_CPU_EVENT, val);
@@ -6551,6 +6561,7 @@
spin_unlock(&tp->lock);
+restart_timer:
tp->timer.expires = jiffies + tp->timer_offset;
add_timer(&tp->timer);
}
@@ -8399,8 +8410,11 @@
}
mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII;
- if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
+ if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
mac_mode &= ~MAC_MODE_LINK_POLARITY;
+ tg3_writephy(tp, MII_TG3_EXT_CTRL,
+ MII_TG3_EXT_CTRL_LNK3_LED_MODE);
+ }
tw32(MAC_MODE, mac_mode);
}
else
@@ -10531,6 +10545,7 @@
{
struct net_device *dev = tp->dev;
u32 hi, lo, mac_offset;
+ int addr_ok = 0;
#ifdef CONFIG_SPARC64
if (!tg3_get_macaddr_sparc(tp))
@@ -10560,29 +10575,34 @@
dev->dev_addr[3] = (lo >> 16) & 0xff;
dev->dev_addr[4] = (lo >> 8) & 0xff;
dev->dev_addr[5] = (lo >> 0) & 0xff;
- }
- /* Next, try NVRAM. */
- else if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
- !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
- !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
- dev->dev_addr[0] = ((hi >> 16) & 0xff);
- dev->dev_addr[1] = ((hi >> 24) & 0xff);
- dev->dev_addr[2] = ((lo >> 0) & 0xff);
- dev->dev_addr[3] = ((lo >> 8) & 0xff);
- dev->dev_addr[4] = ((lo >> 16) & 0xff);
- dev->dev_addr[5] = ((lo >> 24) & 0xff);
- }
- /* Finally just fetch it out of the MAC control regs. */
- else {
- hi = tr32(MAC_ADDR_0_HIGH);
- lo = tr32(MAC_ADDR_0_LOW);
- dev->dev_addr[5] = lo & 0xff;
- dev->dev_addr[4] = (lo >> 8) & 0xff;
- dev->dev_addr[3] = (lo >> 16) & 0xff;
- dev->dev_addr[2] = (lo >> 24) & 0xff;
- dev->dev_addr[1] = hi & 0xff;
- dev->dev_addr[0] = (hi >> 8) & 0xff;
+ /* Some old bootcode may report a 0 MAC address in SRAM */
+ addr_ok = is_valid_ether_addr(&dev->dev_addr[0]);
+ }
+ if (!addr_ok) {
+ /* Next, try NVRAM. */
+ if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
+ !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
+ !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
+ dev->dev_addr[0] = ((hi >> 16) & 0xff);
+ dev->dev_addr[1] = ((hi >> 24) & 0xff);
+ dev->dev_addr[2] = ((lo >> 0) & 0xff);
+ dev->dev_addr[3] = ((lo >> 8) & 0xff);
+ dev->dev_addr[4] = ((lo >> 16) & 0xff);
+ dev->dev_addr[5] = ((lo >> 24) & 0xff);
+ }
+ /* Finally just fetch it out of the MAC control regs. */
+ else {
+ hi = tr32(MAC_ADDR_0_HIGH);
+ lo = tr32(MAC_ADDR_0_LOW);
+
+ dev->dev_addr[5] = lo & 0xff;
+ dev->dev_addr[4] = (lo >> 8) & 0xff;
+ dev->dev_addr[3] = (lo >> 16) & 0xff;
+ dev->dev_addr[2] = (lo >> 24) & 0xff;
+ dev->dev_addr[1] = hi & 0xff;
+ dev->dev_addr[0] = (hi >> 8) & 0xff;
+ }
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index e4cfc80..99c4c19 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -3,7 +3,7 @@
#
menu "Token Ring devices"
- depends on NETDEVICES
+ depends on NETDEVICES && !UML
# So far, we only have PCI, ISA, and MCA token ring devices
config TR
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index d1a86a0..f560941 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -4160,7 +4160,7 @@
** If the address starts with 00 a0, we have to bit-reverse
** each byte of the address.
*/
- if ( (_machine & _MACH_Pmac) &&
+ if ( machine_is(powermac) &&
(dev->dev_addr[0] == 0) &&
(dev->dev_addr[1] == 0xa0) )
{
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 241871589..a9b2150 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1085,6 +1085,25 @@
else
iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
ioaddr + ChipCmd1);
+ if (debug > 1)
+ printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
+ rp->mii_if.force_media, netif_carrier_ok(dev));
+}
+
+/* Called after status of force_media possibly changed */
+void rhine_set_carrier(struct mii_if_info *mii)
+{
+ if (mii->force_media) {
+ /* autoneg is off: Link is always assumed to be up */
+ if (!netif_carrier_ok(mii->dev))
+ netif_carrier_on(mii->dev);
+ }
+ else /* Let MMI library update carrier status */
+ rhine_check_media(mii->dev, 0);
+ if (debug > 1)
+ printk(KERN_INFO "%s: force_media %d, carrier %d\n",
+ mii->dev->name, mii->force_media,
+ netif_carrier_ok(mii->dev));
}
static void rhine_check_media_task(struct net_device *dev)
@@ -1782,6 +1801,7 @@
spin_lock_irq(&rp->lock);
rc = mii_ethtool_sset(&rp->mii_if, cmd);
spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
return rc;
}
@@ -1869,6 +1889,7 @@
spin_lock_irq(&rp->lock);
rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
return rc;
}
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fd17aa8..bad09eb 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -309,7 +309,10 @@
Say Y here to support the Airport 802.11b wireless Ethernet hardware
built into the Macintosh iBook and other recent PowerPC-based
Macintosh machines. This is essentially a Lucent Orinoco card with
- a non-standard interface
+ a non-standard interface.
+
+ This driver does not support the Airport Extreme (802.11b/g). Use
+ the BCM43xx driver for Airport Extreme cards.
config PLX_HERMES
tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
@@ -353,7 +356,7 @@
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on NET_RADIO
+ depends on NET_RADIO && (PCI || PCMCIA)
select FW_LOADER
select CRC32
---help---
@@ -401,6 +404,7 @@
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
depends on NET_RADIO && PCMCIA && HERMES
+ select FW_LOADER
---help---
This is a driver for 802.11b cards using RAM-loadable Symbol
@@ -500,6 +504,7 @@
will be called prism54.ko.
source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/bcm43xx/Kconfig"
# yes, this works even when no drivers are selected
config NET_WIRELESS
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 3a6f7ba..c867798 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_PRISM54) += prism54/
obj-$(CONFIG_HOSTAP) += hostap/
+obj-$(CONFIG_BCM43XX) += bcm43xx/
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
new file mode 100644
index 0000000..4184656
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -0,0 +1,62 @@
+config BCM43XX
+ tristate "Broadcom BCM43xx wireless support"
+ depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && NET_RADIO && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ This is an experimental driver for the Broadcom 43xx wireless chip,
+ found in the Apple Airport Extreme and various other devices.
+
+config BCM43XX_DEBUG
+ bool "Broadcom BCM43xx debugging (RECOMMENDED)"
+ depends on BCM43XX
+ default y
+ ---help---
+ Broadcom 43xx debugging messages.
+ Say Y, because the driver is still very experimental and
+ this will help you get it running.
+
+config BCM43XX_DMA
+ bool
+config BCM43XX_PIO
+ bool
+
+choice
+ prompt "BCM43xx data transfer mode"
+ depends on BCM43XX
+ default BCM43XX_DMA_AND_PIO_MODE
+
+config BCM43XX_DMA_AND_PIO_MODE
+ bool "DMA + PIO"
+ select BCM43XX_DMA
+ select BCM43XX_PIO
+ ---help---
+ Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
+ data transfer modes.
+ The actually used mode is selectable through the module
+ parameter "pio". If the module parameter is pio=0, DMA is used.
+ Otherwise PIO is used. DMA is default.
+
+ If unsure, choose this option.
+
+config BCM43XX_DMA_MODE
+ bool "DMA (Direct Memory Access) only"
+ select BCM43XX_DMA
+ ---help---
+ Only include Direct Memory Access (DMA).
+ This reduces the size of the driver module, by omitting the PIO code.
+
+config BCM43XX_PIO_MODE
+ bool "PIO (Programmed I/O) only"
+ select BCM43XX_PIO
+ ---help---
+ Only include Programmed I/O (PIO).
+ This reduces the size of the driver module, by omitting the DMA code.
+ Please note that PIO transfers are slow (compared to DMA).
+
+ Also note that not all devices of the 43xx series support PIO.
+ The 4306 (Apple Airport Extreme and others) supports PIO, while
+ the 4318 is known to _not_ support PIO.
+
+ Only use PIO, if DMA does not work for you.
+
+endchoice
diff --git a/drivers/net/wireless/bcm43xx/Makefile b/drivers/net/wireless/bcm43xx/Makefile
new file mode 100644
index 0000000..bb5220c
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/Makefile
@@ -0,0 +1,12 @@
+obj-$(CONFIG_BCM43XX) += bcm43xx.o
+bcm43xx-obj-$(CONFIG_BCM43XX_DEBUG) += bcm43xx_debugfs.o
+
+bcm43xx-obj-$(CONFIG_BCM43XX_DMA) += bcm43xx_dma.o
+bcm43xx-obj-$(CONFIG_BCM43XX_PIO) += bcm43xx_pio.o
+
+bcm43xx-objs := bcm43xx_main.o bcm43xx_ilt.o \
+ bcm43xx_radio.o bcm43xx_phy.o \
+ bcm43xx_power.o bcm43xx_wx.o \
+ bcm43xx_leds.o bcm43xx_ethtool.o \
+ bcm43xx_xmit.o bcm43xx_sysfs.o \
+ $(bcm43xx-obj-y)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
new file mode 100644
index 0000000..dcadd29
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -0,0 +1,926 @@
+#ifndef BCM43xx_H_
+#define BCM43xx_H_
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+#include <linux/pci.h>
+#include <net/ieee80211.h>
+#include <net/ieee80211softmac.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+
+
+#include "bcm43xx_debugfs.h"
+#include "bcm43xx_leds.h"
+#include "bcm43xx_sysfs.h"
+
+
+#define PFX KBUILD_MODNAME ": "
+
+#define BCM43xx_SWITCH_CORE_MAX_RETRIES 50
+#define BCM43xx_IRQWAIT_MAX_RETRIES 50
+
+#define BCM43xx_IO_SIZE 8192
+
+/* Active Core PCI Configuration Register. */
+#define BCM43xx_PCICFG_ACTIVE_CORE 0x80
+/* SPROM control register. */
+#define BCM43xx_PCICFG_SPROMCTL 0x88
+/* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */
+#define BCM43xx_PCICFG_ICR 0x94
+
+/* MMIO offsets */
+#define BCM43xx_MMIO_DMA1_REASON 0x20
+#define BCM43xx_MMIO_DMA1_IRQ_MASK 0x24
+#define BCM43xx_MMIO_DMA2_REASON 0x28
+#define BCM43xx_MMIO_DMA2_IRQ_MASK 0x2C
+#define BCM43xx_MMIO_DMA3_REASON 0x30
+#define BCM43xx_MMIO_DMA3_IRQ_MASK 0x34
+#define BCM43xx_MMIO_DMA4_REASON 0x38
+#define BCM43xx_MMIO_DMA4_IRQ_MASK 0x3C
+#define BCM43xx_MMIO_STATUS_BITFIELD 0x120
+#define BCM43xx_MMIO_STATUS2_BITFIELD 0x124
+#define BCM43xx_MMIO_GEN_IRQ_REASON 0x128
+#define BCM43xx_MMIO_GEN_IRQ_MASK 0x12C
+#define BCM43xx_MMIO_RAM_CONTROL 0x130
+#define BCM43xx_MMIO_RAM_DATA 0x134
+#define BCM43xx_MMIO_PS_STATUS 0x140
+#define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158
+#define BCM43xx_MMIO_SHM_CONTROL 0x160
+#define BCM43xx_MMIO_SHM_DATA 0x164
+#define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166
+#define BCM43xx_MMIO_XMITSTAT_0 0x170
+#define BCM43xx_MMIO_XMITSTAT_1 0x174
+#define BCM43xx_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
+#define BCM43xx_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */
+#define BCM43xx_MMIO_DMA1_BASE 0x200
+#define BCM43xx_MMIO_DMA2_BASE 0x220
+#define BCM43xx_MMIO_DMA3_BASE 0x240
+#define BCM43xx_MMIO_DMA4_BASE 0x260
+#define BCM43xx_MMIO_PIO1_BASE 0x300
+#define BCM43xx_MMIO_PIO2_BASE 0x310
+#define BCM43xx_MMIO_PIO3_BASE 0x320
+#define BCM43xx_MMIO_PIO4_BASE 0x330
+#define BCM43xx_MMIO_PHY_VER 0x3E0
+#define BCM43xx_MMIO_PHY_RADIO 0x3E2
+#define BCM43xx_MMIO_ANTENNA 0x3E8
+#define BCM43xx_MMIO_CHANNEL 0x3F0
+#define BCM43xx_MMIO_CHANNEL_EXT 0x3F4
+#define BCM43xx_MMIO_RADIO_CONTROL 0x3F6
+#define BCM43xx_MMIO_RADIO_DATA_HIGH 0x3F8
+#define BCM43xx_MMIO_RADIO_DATA_LOW 0x3FA
+#define BCM43xx_MMIO_PHY_CONTROL 0x3FC
+#define BCM43xx_MMIO_PHY_DATA 0x3FE
+#define BCM43xx_MMIO_MACFILTER_CONTROL 0x420
+#define BCM43xx_MMIO_MACFILTER_DATA 0x422
+#define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A
+#define BCM43xx_MMIO_GPIO_CONTROL 0x49C
+#define BCM43xx_MMIO_GPIO_MASK 0x49E
+#define BCM43xx_MMIO_TSF_0 0x632 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_1 0x634 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_2 0x636 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_3 0x638 /* core rev < 3 only */
+#define BCM43xx_MMIO_POWERUP_DELAY 0x6A8
+
+/* SPROM offsets. */
+#define BCM43xx_SPROM_BASE 0x1000
+#define BCM43xx_SPROM_BOARDFLAGS2 0x1c
+#define BCM43xx_SPROM_IL0MACADDR 0x24
+#define BCM43xx_SPROM_ET0MACADDR 0x27
+#define BCM43xx_SPROM_ET1MACADDR 0x2a
+#define BCM43xx_SPROM_ETHPHY 0x2d
+#define BCM43xx_SPROM_BOARDREV 0x2e
+#define BCM43xx_SPROM_PA0B0 0x2f
+#define BCM43xx_SPROM_PA0B1 0x30
+#define BCM43xx_SPROM_PA0B2 0x31
+#define BCM43xx_SPROM_WL0GPIO0 0x32
+#define BCM43xx_SPROM_WL0GPIO2 0x33
+#define BCM43xx_SPROM_MAXPWR 0x34
+#define BCM43xx_SPROM_PA1B0 0x35
+#define BCM43xx_SPROM_PA1B1 0x36
+#define BCM43xx_SPROM_PA1B2 0x37
+#define BCM43xx_SPROM_IDL_TSSI_TGT 0x38
+#define BCM43xx_SPROM_BOARDFLAGS 0x39
+#define BCM43xx_SPROM_ANTENNA_GAIN 0x3a
+#define BCM43xx_SPROM_VERSION 0x3f
+
+/* BCM43xx_SPROM_BOARDFLAGS values */
+#define BCM43xx_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+#define BCM43xx_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
+#define BCM43xx_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
+#define BCM43xx_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
+#define BCM43xx_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
+#define BCM43xx_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
+#define BCM43xx_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
+#define BCM43xx_BFL_ENETADM 0x0080 /* has ADMtek switch */
+#define BCM43xx_BFL_ENETVLAN 0x0100 /* can do vlan */
+#define BCM43xx_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
+#define BCM43xx_BFL_NOPCI 0x0400 /* leaves PCI floating */
+#define BCM43xx_BFL_FEM 0x0800 /* supports the Front End Module */
+#define BCM43xx_BFL_EXTLNA 0x1000 /* has an external LNA */
+#define BCM43xx_BFL_HGPA 0x2000 /* had high gain PA */
+#define BCM43xx_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
+#define BCM43xx_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define BCM43xx_GPIO_CONTROL 0x6c
+
+/* SHM Routing */
+#define BCM43xx_SHM_SHARED 0x0001
+#define BCM43xx_SHM_WIRELESS 0x0002
+#define BCM43xx_SHM_PCM 0x0003
+#define BCM43xx_SHM_HWMAC 0x0004
+#define BCM43xx_SHM_UCODE 0x0300
+
+/* MacFilter offsets. */
+#define BCM43xx_MACFILTER_SELF 0x0000
+#define BCM43xx_MACFILTER_ASSOC 0x0003
+
+/* Chipcommon registers. */
+#define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04
+#define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0
+#define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4
+#define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8
+#define BCM43xx_CHIPCOMMON_SYSCLKCTL 0xC0
+
+/* PCI core specific registers. */
+#define BCM43xx_PCICORE_BCAST_ADDR 0x50
+#define BCM43xx_PCICORE_BCAST_DATA 0x54
+#define BCM43xx_PCICORE_SBTOPCI2 0x108
+
+/* SBTOPCI2 values. */
+#define BCM43xx_SBTOPCI2_PREFETCH 0x4
+#define BCM43xx_SBTOPCI2_BURST 0x8
+
+/* Chipcommon capabilities. */
+#define BCM43xx_CAPABILITIES_PCTL 0x00040000
+#define BCM43xx_CAPABILITIES_PLLMASK 0x00030000
+#define BCM43xx_CAPABILITIES_PLLSHIFT 16
+#define BCM43xx_CAPABILITIES_FLASHMASK 0x00000700
+#define BCM43xx_CAPABILITIES_FLASHSHIFT 8
+#define BCM43xx_CAPABILITIES_EXTBUSPRESENT 0x00000040
+#define BCM43xx_CAPABILITIES_UARTGPIO 0x00000020
+#define BCM43xx_CAPABILITIES_UARTCLOCKMASK 0x00000018
+#define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT 3
+#define BCM43xx_CAPABILITIES_MIPSBIGENDIAN 0x00000004
+#define BCM43xx_CAPABILITIES_NRUARTSMASK 0x00000003
+
+/* PowerControl */
+#define BCM43xx_PCTL_IN 0xB0
+#define BCM43xx_PCTL_OUT 0xB4
+#define BCM43xx_PCTL_OUTENABLE 0xB8
+#define BCM43xx_PCTL_XTAL_POWERUP 0x40
+#define BCM43xx_PCTL_PLL_POWERDOWN 0x80
+
+/* PowerControl Clock Modes */
+#define BCM43xx_PCTL_CLK_FAST 0x00
+#define BCM43xx_PCTL_CLK_SLOW 0x01
+#define BCM43xx_PCTL_CLK_DYNAMIC 0x02
+
+#define BCM43xx_PCTL_FORCE_SLOW 0x0800
+#define BCM43xx_PCTL_FORCE_PLL 0x1000
+#define BCM43xx_PCTL_DYN_XTAL 0x2000
+
+/* COREIDs */
+#define BCM43xx_COREID_CHIPCOMMON 0x800
+#define BCM43xx_COREID_ILINE20 0x801
+#define BCM43xx_COREID_SDRAM 0x803
+#define BCM43xx_COREID_PCI 0x804
+#define BCM43xx_COREID_MIPS 0x805
+#define BCM43xx_COREID_ETHERNET 0x806
+#define BCM43xx_COREID_V90 0x807
+#define BCM43xx_COREID_USB11_HOSTDEV 0x80a
+#define BCM43xx_COREID_IPSEC 0x80b
+#define BCM43xx_COREID_PCMCIA 0x80d
+#define BCM43xx_COREID_EXT_IF 0x80f
+#define BCM43xx_COREID_80211 0x812
+#define BCM43xx_COREID_MIPS_3302 0x816
+#define BCM43xx_COREID_USB11_HOST 0x817
+#define BCM43xx_COREID_USB11_DEV 0x818
+#define BCM43xx_COREID_USB20_HOST 0x819
+#define BCM43xx_COREID_USB20_DEV 0x81a
+#define BCM43xx_COREID_SDIO_HOST 0x81b
+
+/* Core Information Registers */
+#define BCM43xx_CIR_BASE 0xf00
+#define BCM43xx_CIR_SBTPSFLAG (BCM43xx_CIR_BASE + 0x18)
+#define BCM43xx_CIR_SBIMSTATE (BCM43xx_CIR_BASE + 0x90)
+#define BCM43xx_CIR_SBINTVEC (BCM43xx_CIR_BASE + 0x94)
+#define BCM43xx_CIR_SBTMSTATELOW (BCM43xx_CIR_BASE + 0x98)
+#define BCM43xx_CIR_SBTMSTATEHIGH (BCM43xx_CIR_BASE + 0x9c)
+#define BCM43xx_CIR_SBIMCONFIGLOW (BCM43xx_CIR_BASE + 0xa8)
+#define BCM43xx_CIR_SB_ID_HI (BCM43xx_CIR_BASE + 0xfc)
+
+/* Mask to get the Backplane Flag Number from SBTPSFLAG. */
+#define BCM43xx_BACKPLANE_FLAG_NR_MASK 0x3f
+
+/* SBIMCONFIGLOW values/masks. */
+#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK 0x00000007
+#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT 0
+#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK 0x00000070
+#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT 4
+#define BCM43xx_SBIMCONFIGLOW_CONNID_MASK 0x00ff0000
+#define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT 16
+
+/* sbtmstatelow state flags */
+#define BCM43xx_SBTMSTATELOW_RESET 0x01
+#define BCM43xx_SBTMSTATELOW_REJECT 0x02
+#define BCM43xx_SBTMSTATELOW_CLOCK 0x10000
+#define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK 0x20000
+
+/* sbtmstatehigh state flags */
+#define BCM43xx_SBTMSTATEHIGH_SERROR 0x1
+#define BCM43xx_SBTMSTATEHIGH_BUSY 0x4
+
+/* sbimstate flags */
+#define BCM43xx_SBIMSTATE_IB_ERROR 0x20000
+#define BCM43xx_SBIMSTATE_TIMEOUT 0x40000
+
+/* PHYVersioning */
+#define BCM43xx_PHYTYPE_A 0x00
+#define BCM43xx_PHYTYPE_B 0x01
+#define BCM43xx_PHYTYPE_G 0x02
+
+/* PHYRegisters */
+#define BCM43xx_PHY_ILT_A_CTRL 0x0072
+#define BCM43xx_PHY_ILT_A_DATA1 0x0073
+#define BCM43xx_PHY_ILT_A_DATA2 0x0074
+#define BCM43xx_PHY_G_LO_CONTROL 0x0810
+#define BCM43xx_PHY_ILT_G_CTRL 0x0472
+#define BCM43xx_PHY_ILT_G_DATA1 0x0473
+#define BCM43xx_PHY_ILT_G_DATA2 0x0474
+#define BCM43xx_PHY_A_PCTL 0x007B
+#define BCM43xx_PHY_G_PCTL 0x0029
+#define BCM43xx_PHY_A_CRS 0x0029
+#define BCM43xx_PHY_RADIO_BITFIELD 0x0401
+#define BCM43xx_PHY_G_CRS 0x0429
+#define BCM43xx_PHY_NRSSILT_CTRL 0x0803
+#define BCM43xx_PHY_NRSSILT_DATA 0x0804
+
+/* RadioRegisters */
+#define BCM43xx_RADIOCTL_ID 0x01
+
+/* StatusBitField */
+#define BCM43xx_SBF_MAC_ENABLED 0x00000001
+#define BCM43xx_SBF_2 0x00000002 /*FIXME: fix name*/
+#define BCM43xx_SBF_CORE_READY 0x00000004
+#define BCM43xx_SBF_400 0x00000400 /*FIXME: fix name*/
+#define BCM43xx_SBF_4000 0x00004000 /*FIXME: fix name*/
+#define BCM43xx_SBF_8000 0x00008000 /*FIXME: fix name*/
+#define BCM43xx_SBF_XFER_REG_BYTESWAP 0x00010000
+#define BCM43xx_SBF_MODE_NOTADHOC 0x00020000
+#define BCM43xx_SBF_MODE_AP 0x00040000
+#define BCM43xx_SBF_RADIOREG_LOCK 0x00080000
+#define BCM43xx_SBF_MODE_MONITOR 0x00400000
+#define BCM43xx_SBF_MODE_PROMISC 0x01000000
+#define BCM43xx_SBF_PS1 0x02000000
+#define BCM43xx_SBF_PS2 0x04000000
+#define BCM43xx_SBF_NO_SSID_BCAST 0x08000000
+#define BCM43xx_SBF_TIME_UPDATE 0x10000000
+#define BCM43xx_SBF_80000000 0x80000000 /*FIXME: fix name*/
+
+/* MicrocodeFlagsBitfield (addr + lo-word values?)*/
+#define BCM43xx_UCODEFLAGS_OFFSET 0x005E
+
+#define BCM43xx_UCODEFLAG_AUTODIV 0x0001
+#define BCM43xx_UCODEFLAG_UNKBGPHY 0x0002
+#define BCM43xx_UCODEFLAG_UNKBPHY 0x0004
+#define BCM43xx_UCODEFLAG_UNKGPHY 0x0020
+#define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040
+#define BCM43xx_UCODEFLAG_JAPAN 0x0080
+
+/* Generic-Interrupt reasons. */
+#define BCM43xx_IRQ_READY (1 << 0)
+#define BCM43xx_IRQ_BEACON (1 << 1)
+#define BCM43xx_IRQ_PS (1 << 2)
+#define BCM43xx_IRQ_REG124 (1 << 5)
+#define BCM43xx_IRQ_PMQ (1 << 6)
+#define BCM43xx_IRQ_PIO_WORKAROUND (1 << 8)
+#define BCM43xx_IRQ_XMIT_ERROR (1 << 11)
+#define BCM43xx_IRQ_RX (1 << 15)
+#define BCM43xx_IRQ_SCAN (1 << 16)
+#define BCM43xx_IRQ_NOISE (1 << 18)
+#define BCM43xx_IRQ_XMIT_STATUS (1 << 29)
+
+#define BCM43xx_IRQ_ALL 0xffffffff
+#define BCM43xx_IRQ_INITIAL (BCM43xx_IRQ_PS | \
+ BCM43xx_IRQ_REG124 | \
+ BCM43xx_IRQ_PMQ | \
+ BCM43xx_IRQ_XMIT_ERROR | \
+ BCM43xx_IRQ_RX | \
+ BCM43xx_IRQ_SCAN | \
+ BCM43xx_IRQ_NOISE | \
+ BCM43xx_IRQ_XMIT_STATUS)
+
+
+/* Initial default iw_mode */
+#define BCM43xx_INITIAL_IWMODE IW_MODE_INFRA
+
+/* Bus type PCI. */
+#define BCM43xx_BUSTYPE_PCI 0
+/* Bus type Silicone Backplane Bus. */
+#define BCM43xx_BUSTYPE_SB 1
+/* Bus type PCMCIA. */
+#define BCM43xx_BUSTYPE_PCMCIA 2
+
+/* Threshold values. */
+#define BCM43xx_MIN_RTS_THRESHOLD 1U
+#define BCM43xx_MAX_RTS_THRESHOLD 2304U
+#define BCM43xx_DEFAULT_RTS_THRESHOLD BCM43xx_MAX_RTS_THRESHOLD
+
+#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7
+#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4
+
+/* Max size of a security key */
+#define BCM43xx_SEC_KEYSIZE 16
+/* Security algorithms. */
+enum {
+ BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
+ BCM43xx_SEC_ALGO_WEP,
+ BCM43xx_SEC_ALGO_UNKNOWN,
+ BCM43xx_SEC_ALGO_AES,
+ BCM43xx_SEC_ALGO_WEP104,
+ BCM43xx_SEC_ALGO_TKIP,
+};
+
+#ifdef assert
+# undef assert
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+#define assert(expr) \
+ do { \
+ if (unlikely(!(expr))) { \
+ printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n", \
+ #expr, __FILE__, __LINE__, __FUNCTION__); \
+ } \
+ } while (0)
+#else
+#define assert(expr) do { /* nothing */ } while (0)
+#endif
+
+/* rate limited printk(). */
+#ifdef printkl
+# undef printkl
+#endif
+#define printkl(f, x...) do { if (printk_ratelimit()) printk(f ,##x); } while (0)
+/* rate limited printk() for debugging */
+#ifdef dprintkl
+# undef dprintkl
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define dprintkl printkl
+#else
+# define dprintkl(f, x...) do { /* nothing */ } while (0)
+#endif
+
+/* Helper macro for if branches.
+ * An if branch marked with this macro is only taken in DEBUG mode.
+ * Example:
+ * if (DEBUG_ONLY(foo == bar)) {
+ * do something
+ * }
+ * In DEBUG mode, the branch will be taken if (foo == bar).
+ * In non-DEBUG mode, the branch will never be taken.
+ */
+#ifdef DEBUG_ONLY
+# undef DEBUG_ONLY
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define DEBUG_ONLY(x) (x)
+#else
+# define DEBUG_ONLY(x) 0
+#endif
+
+/* debugging printk() */
+#ifdef dprintk
+# undef dprintk
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define dprintk(f, x...) do { printk(f ,##x); } while (0)
+#else
+# define dprintk(f, x...) do { /* nothing */ } while (0)
+#endif
+
+
+struct net_device;
+struct pci_dev;
+struct bcm43xx_dmaring;
+struct bcm43xx_pioqueue;
+
+struct bcm43xx_initval {
+ u16 offset;
+ u16 size;
+ u32 value;
+} __attribute__((__packed__));
+
+/* Values for bcm430x_sprominfo.locale */
+enum {
+ BCM43xx_LOCALE_WORLD = 0,
+ BCM43xx_LOCALE_THAILAND,
+ BCM43xx_LOCALE_ISRAEL,
+ BCM43xx_LOCALE_JORDAN,
+ BCM43xx_LOCALE_CHINA,
+ BCM43xx_LOCALE_JAPAN,
+ BCM43xx_LOCALE_USA_CANADA_ANZ,
+ BCM43xx_LOCALE_EUROPE,
+ BCM43xx_LOCALE_USA_LOW,
+ BCM43xx_LOCALE_JAPAN_HIGH,
+ BCM43xx_LOCALE_ALL,
+ BCM43xx_LOCALE_NONE,
+};
+
+#define BCM43xx_SPROM_SIZE 64 /* in 16-bit words. */
+struct bcm43xx_sprominfo {
+ u16 boardflags2;
+ u8 il0macaddr[6];
+ u8 et0macaddr[6];
+ u8 et1macaddr[6];
+ u8 et0phyaddr:5;
+ u8 et1phyaddr:5;
+ u8 et0mdcport:1;
+ u8 et1mdcport:1;
+ u8 boardrev;
+ u8 locale:4;
+ u8 antennas_aphy:2;
+ u8 antennas_bgphy:2;
+ u16 pa0b0;
+ u16 pa0b1;
+ u16 pa0b2;
+ u8 wl0gpio0;
+ u8 wl0gpio1;
+ u8 wl0gpio2;
+ u8 wl0gpio3;
+ u8 maxpower_aphy;
+ u8 maxpower_bgphy;
+ u16 pa1b0;
+ u16 pa1b1;
+ u16 pa1b2;
+ u8 idle_tssi_tgt_aphy;
+ u8 idle_tssi_tgt_bgphy;
+ u16 boardflags;
+ u16 antennagain_aphy;
+ u16 antennagain_bgphy;
+};
+
+/* Value pair to measure the LocalOscillator. */
+struct bcm43xx_lopair {
+ s8 low;
+ s8 high;
+ u8 used:1;
+};
+#define BCM43xx_LO_COUNT (14*4)
+
+struct bcm43xx_phyinfo {
+ /* Hardware Data */
+ u8 version;
+ u8 type;
+ u8 rev;
+ u16 antenna_diversity;
+ u16 savedpctlreg;
+ u16 minlowsig[2];
+ u16 minlowsigpos[2];
+ u8 connected:1,
+ calibrated:1,
+ is_locked:1, /* used in bcm43xx_phy_{un}lock() */
+ dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */
+ /* LO Measurement Data.
+ * Use bcm43xx_get_lopair() to get a value.
+ */
+ struct bcm43xx_lopair *_lo_pairs;
+
+ /* TSSI to dBm table in use */
+ const s8 *tssi2dbm;
+ /* idle TSSI value */
+ s8 idle_tssi;
+
+ /* Values from bcm43xx_calc_loopback_gain() */
+ u16 loopback_gain[2];
+
+ /* PHY lock for core.rev < 3
+ * This lock is only used by bcm43xx_phy_{un}lock()
+ */
+ spinlock_t lock;
+};
+
+
+struct bcm43xx_radioinfo {
+ u16 manufact;
+ u16 version;
+ u8 revision;
+
+ /* Desired TX power in dBm Q5.2 */
+ u16 txpower_desired;
+ /* TX Power control values. */
+ union {
+ /* B/G PHY */
+ struct {
+ u16 baseband_atten;
+ u16 radio_atten;
+ u16 txctl1;
+ u16 txctl2;
+ };
+ /* A PHY */
+ struct {
+ u16 txpwr_offset;
+ };
+ };
+
+ /* Current Interference Mitigation mode */
+ int interfmode;
+ /* Stack of saved values from the Interference Mitigation code.
+ * Each value in the stack is layed out as follows:
+ * bit 0-11: offset
+ * bit 12-15: register ID
+ * bit 16-32: value
+ * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
+ */
+#define BCM43xx_INTERFSTACK_SIZE 26
+ u32 interfstack[BCM43xx_INTERFSTACK_SIZE];
+
+ /* Saved values from the NRSSI Slope calculation */
+ s16 nrssi[2];
+ s32 nrssislope;
+ /* In memory nrssi lookup table. */
+ s8 nrssi_lt[64];
+
+ /* current channel */
+ u8 channel;
+ u8 initial_channel;
+
+ u16 lofcal;
+
+ u16 initval;
+
+ u8 enabled:1;
+ /* ACI (adjacent channel interference) flags. */
+ u8 aci_enable:1,
+ aci_wlan_automatic:1,
+ aci_hw_rssi:1;
+};
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct bcm43xx_dma {
+ struct bcm43xx_dmaring *tx_ring0;
+ struct bcm43xx_dmaring *tx_ring1;
+ struct bcm43xx_dmaring *tx_ring2;
+ struct bcm43xx_dmaring *tx_ring3;
+ struct bcm43xx_dmaring *rx_ring0;
+ struct bcm43xx_dmaring *rx_ring1; /* only available on core.rev < 5 */
+};
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct bcm43xx_pio {
+ struct bcm43xx_pioqueue *queue0;
+ struct bcm43xx_pioqueue *queue1;
+ struct bcm43xx_pioqueue *queue2;
+ struct bcm43xx_pioqueue *queue3;
+};
+
+#define BCM43xx_MAX_80211_CORES 2
+
+#ifdef CONFIG_BCM947XX
+#define core_offset(bcm) (bcm)->current_core_offset
+#else
+#define core_offset(bcm) 0
+#endif
+
+/* Generic information about a core. */
+struct bcm43xx_coreinfo {
+ u8 available:1,
+ enabled:1,
+ initialized:1;
+ /** core_id ID number */
+ u16 id;
+ /** core_rev revision number */
+ u8 rev;
+ /** Index number for _switch_core() */
+ u8 index;
+};
+
+/* Additional information for each 80211 core. */
+struct bcm43xx_coreinfo_80211 {
+ /* PHY device. */
+ struct bcm43xx_phyinfo phy;
+ /* Radio device. */
+ struct bcm43xx_radioinfo radio;
+ union {
+ /* DMA context. */
+ struct bcm43xx_dma dma;
+ /* PIO context. */
+ struct bcm43xx_pio pio;
+ };
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct bcm43xx_noise_calculation {
+ struct bcm43xx_coreinfo *core_at_start;
+ u8 channel_at_start;
+ u8 calculation_running:1;
+ u8 nr_samples;
+ s8 samples[8][4];
+};
+
+struct bcm43xx_stats {
+ u8 link_quality;
+ u8 noise;
+ struct iw_statistics wstats;
+ /* Store the last TX/RX times here for updating the leds. */
+ unsigned long last_tx;
+ unsigned long last_rx;
+};
+
+struct bcm43xx_key {
+ u8 enabled:1;
+ u8 algorithm;
+};
+
+struct bcm43xx_private {
+ struct bcm43xx_sysfs sysfs;
+
+ struct ieee80211_device *ieee;
+ struct ieee80211softmac_device *softmac;
+
+ struct net_device *net_dev;
+ struct pci_dev *pci_dev;
+ unsigned int irq;
+
+ void __iomem *mmio_addr;
+ unsigned int mmio_len;
+
+ /* Do not use the lock directly. Use the bcm43xx_lock* helper
+ * functions, to be MMIO-safe. */
+ spinlock_t _lock;
+
+ /* Driver status flags. */
+ u32 initialized:1, /* init_board() succeed */
+ was_initialized:1, /* for PCI suspend/resume. */
+ shutting_down:1, /* free_board() in progress */
+ __using_pio:1, /* Internal, use bcm43xx_using_pio(). */
+ bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */
+ reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */
+ powersaving:1, /* TRUE if we are in PowerSaving mode. FALSE otherwise. */
+ short_preamble:1, /* TRUE, if short preamble is enabled. */
+ firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
+
+ struct bcm43xx_stats stats;
+
+ /* Bus type we are connected to.
+ * This is currently always BCM43xx_BUSTYPE_PCI
+ */
+ u8 bustype;
+
+ u16 board_vendor;
+ u16 board_type;
+ u16 board_revision;
+
+ u16 chip_id;
+ u8 chip_rev;
+ u8 chip_package;
+
+ struct bcm43xx_sprominfo sprom;
+#define BCM43xx_NR_LEDS 4
+ struct bcm43xx_led leds[BCM43xx_NR_LEDS];
+
+ /* The currently active core. */
+ struct bcm43xx_coreinfo *current_core;
+#ifdef CONFIG_BCM947XX
+ /** current core memory offset */
+ u32 current_core_offset;
+#endif
+ struct bcm43xx_coreinfo *active_80211_core;
+ /* coreinfo structs for all possible cores follow.
+ * Note that a core might not exist.
+ * So check the coreinfo flags before using it.
+ */
+ struct bcm43xx_coreinfo core_chipcommon;
+ struct bcm43xx_coreinfo core_pci;
+ struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ];
+ /* Additional information, specific to the 80211 cores. */
+ struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ];
+ /* Index of the current 80211 core. If current_core is not
+ * an 80211 core, this is -1.
+ */
+ int current_80211_core_idx;
+ /* Number of available 80211 cores. */
+ int nr_80211_available;
+
+ u32 chipcommon_capabilities;
+
+ /* Reason code of the last interrupt. */
+ u32 irq_reason;
+ u32 dma_reason[4];
+ /* saved irq enable/disable state bitfield. */
+ u32 irq_savedstate;
+ /* Link Quality calculation context. */
+ struct bcm43xx_noise_calculation noisecalc;
+
+ /* Threshold values. */
+ //TODO: The RTS thr has to be _used_. Currently, it is only set via WX.
+ u32 rts_threshold;
+
+ /* Interrupt Service Routine tasklet (bottom-half) */
+ struct tasklet_struct isr_tasklet;
+
+ /* Periodic tasks */
+ struct timer_list periodic_tasks;
+ unsigned int periodic_state;
+
+ struct work_struct restart_work;
+
+ /* Informational stuff. */
+ char nick[IW_ESSID_MAX_SIZE + 1];
+
+ /* encryption/decryption */
+ u16 security_offset;
+ struct bcm43xx_key key[54];
+ u8 default_key_idx;
+
+ /* Firmware. */
+ const struct firmware *ucode;
+ const struct firmware *pcm;
+ const struct firmware *initvals0;
+ const struct firmware *initvals1;
+
+ /* Debugging stuff follows. */
+#ifdef CONFIG_BCM43XX_DEBUG
+ struct bcm43xx_dfsentry *dfsentry;
+#endif
+};
+
+/* bcm43xx_(un)lock() protect struct bcm43xx_private.
+ * Note that _NO_ MMIO writes are allowed. If you want to
+ * write to the device through MMIO in the critical section, use
+ * the *_mmio lock functions.
+ * MMIO read-access is allowed, though.
+ */
+#define bcm43xx_lock(bcm, flags) spin_lock_irqsave(&(bcm)->_lock, flags)
+#define bcm43xx_unlock(bcm, flags) spin_unlock_irqrestore(&(bcm)->_lock, flags)
+/* bcm43xx_(un)lock_mmio() protect struct bcm43xx_private and MMIO.
+ * MMIO write-access to the device is allowed.
+ * All MMIO writes are flushed on unlock, so it is guaranteed to not
+ * interfere with other threads writing MMIO registers.
+ */
+#define bcm43xx_lock_mmio(bcm, flags) bcm43xx_lock(bcm, flags)
+#define bcm43xx_unlock_mmio(bcm, flags) do { mmiowb(); bcm43xx_unlock(bcm, flags); } while (0)
+
+static inline
+struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
+{
+ return ieee80211softmac_priv(dev);
+}
+
+
+/* Helper function, which returns a boolean.
+ * TRUE, if PIO is used; FALSE, if DMA is used.
+ */
+#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
+static inline
+int bcm43xx_using_pio(struct bcm43xx_private *bcm)
+{
+ return bcm->__using_pio;
+}
+#elif defined(CONFIG_BCM43XX_DMA)
+static inline
+int bcm43xx_using_pio(struct bcm43xx_private *bcm)
+{
+ return 0;
+}
+#elif defined(CONFIG_BCM43XX_PIO)
+static inline
+int bcm43xx_using_pio(struct bcm43xx_private *bcm)
+{
+ return 1;
+}
+#else
+# error "Using neither DMA nor PIO? Confused..."
+#endif
+
+/* Helper functions to access data structures private to the 80211 cores.
+ * Note that we _must_ have an 80211 core mapped when calling
+ * any of these functions.
+ */
+static inline
+struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm)
+{
+ assert(bcm43xx_using_pio(bcm));
+ assert(bcm->current_80211_core_idx >= 0);
+ assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
+ return &(bcm->core_80211_ext[bcm->current_80211_core_idx].pio);
+}
+static inline
+struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm)
+{
+ assert(!bcm43xx_using_pio(bcm));
+ assert(bcm->current_80211_core_idx >= 0);
+ assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
+ return &(bcm->core_80211_ext[bcm->current_80211_core_idx].dma);
+}
+static inline
+struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm)
+{
+ assert(bcm->current_80211_core_idx >= 0);
+ assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
+ return &(bcm->core_80211_ext[bcm->current_80211_core_idx].phy);
+}
+static inline
+struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm)
+{
+ assert(bcm->current_80211_core_idx >= 0);
+ assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
+ return &(bcm->core_80211_ext[bcm->current_80211_core_idx].radio);
+}
+
+/* Are we running in init_board() context? */
+static inline
+int bcm43xx_is_initializing(struct bcm43xx_private *bcm)
+{
+ if (bcm->initialized)
+ return 0;
+ if (bcm->shutting_down)
+ return 0;
+ return 1;
+}
+
+static inline
+struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy,
+ u16 radio_attenuation,
+ u16 baseband_attenuation)
+{
+ return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2));
+}
+
+
+static inline
+u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
+{
+ return ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
+}
+
+static inline
+void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
+{
+ iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
+}
+
+static inline
+u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
+{
+ return ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
+}
+
+static inline
+void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
+{
+ iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
+}
+
+static inline
+int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value)
+{
+ return pci_read_config_word(bcm->pci_dev, offset, value);
+}
+
+static inline
+int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value)
+{
+ return pci_read_config_dword(bcm->pci_dev, offset, value);
+}
+
+static inline
+int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value)
+{
+ return pci_write_config_word(bcm->pci_dev, offset, value);
+}
+
+static inline
+int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value)
+{
+ return pci_write_config_dword(bcm->pci_dev, offset, value);
+}
+
+/** Limit a value between two limits */
+#ifdef limit_value
+# undef limit_value
+#endif
+#define limit_value(value, min, max) \
+ ({ \
+ typeof(value) __value = (value); \
+ typeof(value) __min = (min); \
+ typeof(value) __max = (max); \
+ if (__value < __min) \
+ __value = __min; \
+ else if (__value > __max) \
+ __value = __max; \
+ __value; \
+ })
+
+/** Helpers to print MAC addresses. */
+#define BCM43xx_MACFMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define BCM43xx_MACARG(x) ((u8*)(x))[0], ((u8*)(x))[1], \
+ ((u8*)(x))[2], ((u8*)(x))[3], \
+ ((u8*)(x))[4], ((u8*)(x))[5]
+
+#endif /* BCM43xx_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
new file mode 100644
index 0000000..d2c3401
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
@@ -0,0 +1,499 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ debugfs driver debugging code
+
+ Copyright (c) 2005 Michael Buesch <mbuesch@freenet.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+
+
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_debugfs.h"
+#include "bcm43xx_dma.h"
+#include "bcm43xx_pio.h"
+#include "bcm43xx_xmit.h"
+
+#define REALLY_BIG_BUFFER_SIZE (1024*256)
+
+static struct bcm43xx_debugfs fs;
+static char really_big_buffer[REALLY_BIG_BUFFER_SIZE];
+static DECLARE_MUTEX(big_buffer_sem);
+
+
+static ssize_t write_file_dummy(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return count;
+}
+
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->u.generic_ip;
+ return 0;
+}
+
+#define fappend(fmt, x...) pos += snprintf(buf + pos, len - pos, fmt , ##x)
+
+static ssize_t devinfo_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ const size_t len = REALLY_BIG_BUFFER_SIZE;
+
+ struct bcm43xx_private *bcm = file->private_data;
+ char *buf = really_big_buffer;
+ size_t pos = 0;
+ ssize_t res;
+ struct net_device *net_dev;
+ struct pci_dev *pci_dev;
+ unsigned long flags;
+ u16 tmp16;
+ int i;
+
+ down(&big_buffer_sem);
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (!bcm->initialized) {
+ fappend("Board not initialized.\n");
+ goto out;
+ }
+ net_dev = bcm->net_dev;
+ pci_dev = bcm->pci_dev;
+
+ /* This is where the information is written to the "devinfo" file */
+ fappend("*** %s devinfo ***\n", net_dev->name);
+ fappend("vendor: 0x%04x device: 0x%04x\n",
+ pci_dev->vendor, pci_dev->device);
+ fappend("subsystem_vendor: 0x%04x subsystem_device: 0x%04x\n",
+ pci_dev->subsystem_vendor, pci_dev->subsystem_device);
+ fappend("IRQ: %d\n", bcm->irq);
+ fappend("mmio_addr: 0x%p mmio_len: %u\n", bcm->mmio_addr, bcm->mmio_len);
+ fappend("chip_id: 0x%04x chip_rev: 0x%02x\n", bcm->chip_id, bcm->chip_rev);
+ if ((bcm->core_80211[0].rev >= 3) && (bcm43xx_read32(bcm, 0x0158) & (1 << 16)))
+ fappend("Radio disabled by hardware!\n");
+ if ((bcm->core_80211[0].rev < 3) && !(bcm43xx_read16(bcm, 0x049A) & (1 << 4)))
+ fappend("Radio disabled by hardware!\n");
+ fappend("board_vendor: 0x%04x board_type: 0x%04x\n", bcm->board_vendor,
+ bcm->board_type);
+
+ fappend("\nCores:\n");
+#define fappend_core(name, info) fappend("core \"" name "\" %s, %s, id: 0x%04x, " \
+ "rev: 0x%02x, index: 0x%02x\n", \
+ (info).available \
+ ? "available" : "nonavailable", \
+ (info).enabled \
+ ? "enabled" : "disabled", \
+ (info).id, (info).rev, (info).index)
+ fappend_core("CHIPCOMMON", bcm->core_chipcommon);
+ fappend_core("PCI", bcm->core_pci);
+ fappend_core("first 80211", bcm->core_80211[0]);
+ fappend_core("second 80211", bcm->core_80211[1]);
+#undef fappend_core
+ tmp16 = bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_CONTROL);
+ fappend("LEDs: ");
+ for (i = 0; i < BCM43xx_NR_LEDS; i++)
+ fappend("%d ", !!(tmp16 & (1 << i)));
+ fappend("\n");
+
+out:
+ bcm43xx_unlock_mmio(bcm, flags);
+ res = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+ up(&big_buffer_sem);
+ return res;
+}
+
+static ssize_t drvinfo_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ const size_t len = REALLY_BIG_BUFFER_SIZE;
+
+ char *buf = really_big_buffer;
+ size_t pos = 0;
+ ssize_t res;
+
+ down(&big_buffer_sem);
+
+ /* This is where the information is written to the "driver" file */
+ fappend(KBUILD_MODNAME " driver\n");
+ fappend("Compiled at: %s %s\n", __DATE__, __TIME__);
+
+ res = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+ up(&big_buffer_sem);
+ return res;
+}
+
+static ssize_t spromdump_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ const size_t len = REALLY_BIG_BUFFER_SIZE;
+
+ struct bcm43xx_private *bcm = file->private_data;
+ char *buf = really_big_buffer;
+ size_t pos = 0;
+ ssize_t res;
+ unsigned long flags;
+
+ down(&big_buffer_sem);
+ bcm43xx_lock_mmio(bcm, flags);
+ if (!bcm->initialized) {
+ fappend("Board not initialized.\n");
+ goto out;
+ }
+
+ /* This is where the information is written to the "sprom_dump" file */
+ fappend("boardflags: 0x%04x\n", bcm->sprom.boardflags);
+
+out:
+ bcm43xx_unlock_mmio(bcm, flags);
+ res = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+ up(&big_buffer_sem);
+ return res;
+}
+
+static ssize_t tsf_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ const size_t len = REALLY_BIG_BUFFER_SIZE;
+
+ struct bcm43xx_private *bcm = file->private_data;
+ char *buf = really_big_buffer;
+ size_t pos = 0;
+ ssize_t res;
+ unsigned long flags;
+ u64 tsf;
+
+ down(&big_buffer_sem);
+ bcm43xx_lock_mmio(bcm, flags);
+ if (!bcm->initialized) {
+ fappend("Board not initialized.\n");
+ goto out;
+ }
+ bcm43xx_tsf_read(bcm, &tsf);
+ fappend("0x%08x%08x\n",
+ (unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32),
+ (unsigned int)(tsf & 0xFFFFFFFFULL));
+
+out:
+ bcm43xx_unlock_mmio(bcm, flags);
+ res = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+ up(&big_buffer_sem);
+ return res;
+}
+
+static ssize_t tsf_write_file(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct bcm43xx_private *bcm = file->private_data;
+ char *buf = really_big_buffer;
+ ssize_t buf_size;
+ ssize_t res;
+ unsigned long flags;
+ u64 tsf;
+
+ buf_size = min(count, sizeof (really_big_buffer) - 1);
+ down(&big_buffer_sem);
+ if (copy_from_user(buf, user_buf, buf_size)) {
+ res = -EFAULT;
+ goto out_up;
+ }
+ bcm43xx_lock_mmio(bcm, flags);
+ if (!bcm->initialized) {
+ printk(KERN_INFO PFX "debugfs: Board not initialized.\n");
+ res = -EFAULT;
+ goto out_unlock;
+ }
+ if (sscanf(buf, "%lli", &tsf) != 1) {
+ printk(KERN_INFO PFX "debugfs: invalid values for \"tsf\"\n");
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ bcm43xx_tsf_write(bcm, tsf);
+ res = buf_size;
+
+out_unlock:
+ bcm43xx_unlock_mmio(bcm, flags);
+out_up:
+ up(&big_buffer_sem);
+ return res;
+}
+
+static ssize_t txstat_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ const size_t len = REALLY_BIG_BUFFER_SIZE;
+
+ struct bcm43xx_private *bcm = file->private_data;
+ char *buf = really_big_buffer;
+ size_t pos = 0;
+ ssize_t res;
+ unsigned long flags;
+ struct bcm43xx_dfsentry *e;
+ struct bcm43xx_xmitstatus *status;
+ int i, cnt, j = 0;
+
+ down(&big_buffer_sem);
+ bcm43xx_lock(bcm, flags);
+
+ fappend("Last %d logged xmitstatus blobs (Latest first):\n\n",
+ BCM43xx_NR_LOGGED_XMITSTATUS);
+ e = bcm->dfsentry;
+ if (e->xmitstatus_printing == 0) {
+ /* At the beginning, make a copy of all data to avoid
+ * concurrency, as this function is called multiple
+ * times for big logs. Without copying, the data might
+ * change between reads. This would result in total trash.
+ */
+ e->xmitstatus_printing = 1;
+ e->saved_xmitstatus_ptr = e->xmitstatus_ptr;
+ e->saved_xmitstatus_cnt = e->xmitstatus_cnt;
+ memcpy(e->xmitstatus_print_buffer, e->xmitstatus_buffer,
+ BCM43xx_NR_LOGGED_XMITSTATUS * sizeof(*(e->xmitstatus_buffer)));
+ }
+ i = e->saved_xmitstatus_ptr - 1;
+ if (i < 0)
+ i = BCM43xx_NR_LOGGED_XMITSTATUS - 1;
+ cnt = e->saved_xmitstatus_cnt;
+ while (cnt) {
+ status = e->xmitstatus_print_buffer + i;
+ fappend("0x%02x: cookie: 0x%04x, flags: 0x%02x, "
+ "cnt1: 0x%02x, cnt2: 0x%02x, seq: 0x%04x, "
+ "unk: 0x%04x\n", j,
+ status->cookie, status->flags,
+ status->cnt1, status->cnt2, status->seq,
+ status->unknown);
+ j++;
+ cnt--;
+ i--;
+ if (i < 0)
+ i = BCM43xx_NR_LOGGED_XMITSTATUS - 1;
+ }
+
+ bcm43xx_unlock(bcm, flags);
+ res = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+ bcm43xx_lock(bcm, flags);
+ if (*ppos == pos) {
+ /* Done. Drop the copied data. */
+ e->xmitstatus_printing = 0;
+ }
+ bcm43xx_unlock(bcm, flags);
+ up(&big_buffer_sem);
+ return res;
+}
+
+#undef fappend
+
+
+static struct file_operations devinfo_fops = {
+ .read = devinfo_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations spromdump_fops = {
+ .read = spromdump_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations drvinfo_fops = {
+ .read = drvinfo_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations tsf_fops = {
+ .read = tsf_read_file,
+ .write = tsf_write_file,
+ .open = open_file_generic,
+};
+
+static struct file_operations txstat_fops = {
+ .read = txstat_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+
+void bcm43xx_debugfs_add_device(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_dfsentry *e;
+ char devdir[IFNAMSIZ];
+
+ assert(bcm);
+ e = kzalloc(sizeof(*e), GFP_KERNEL);
+ if (!e) {
+ printk(KERN_ERR PFX "out of memory\n");
+ return;
+ }
+ e->bcm = bcm;
+ e->xmitstatus_buffer = kzalloc(BCM43xx_NR_LOGGED_XMITSTATUS
+ * sizeof(*(e->xmitstatus_buffer)),
+ GFP_KERNEL);
+ if (!e->xmitstatus_buffer) {
+ printk(KERN_ERR PFX "out of memory\n");
+ kfree(e);
+ return;
+ }
+ e->xmitstatus_print_buffer = kzalloc(BCM43xx_NR_LOGGED_XMITSTATUS
+ * sizeof(*(e->xmitstatus_buffer)),
+ GFP_KERNEL);
+ if (!e->xmitstatus_print_buffer) {
+ printk(KERN_ERR PFX "out of memory\n");
+ kfree(e);
+ return;
+ }
+
+
+ bcm->dfsentry = e;
+
+ strncpy(devdir, bcm->net_dev->name, ARRAY_SIZE(devdir));
+ e->subdir = debugfs_create_dir(devdir, fs.root);
+ e->dentry_devinfo = debugfs_create_file("devinfo", 0444, e->subdir,
+ bcm, &devinfo_fops);
+ if (!e->dentry_devinfo)
+ printk(KERN_ERR PFX "debugfs: creating \"devinfo\" for \"%s\" failed!\n", devdir);
+ e->dentry_spromdump = debugfs_create_file("sprom_dump", 0444, e->subdir,
+ bcm, &spromdump_fops);
+ if (!e->dentry_spromdump)
+ printk(KERN_ERR PFX "debugfs: creating \"sprom_dump\" for \"%s\" failed!\n", devdir);
+ e->dentry_tsf = debugfs_create_file("tsf", 0666, e->subdir,
+ bcm, &tsf_fops);
+ if (!e->dentry_tsf)
+ printk(KERN_ERR PFX "debugfs: creating \"tsf\" for \"%s\" failed!\n", devdir);
+ e->dentry_txstat = debugfs_create_file("tx_status", 0444, e->subdir,
+ bcm, &txstat_fops);
+ if (!e->dentry_txstat)
+ printk(KERN_ERR PFX "debugfs: creating \"tx_status\" for \"%s\" failed!\n", devdir);
+}
+
+void bcm43xx_debugfs_remove_device(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_dfsentry *e;
+
+ if (!bcm)
+ return;
+
+ e = bcm->dfsentry;
+ assert(e);
+ debugfs_remove(e->dentry_spromdump);
+ debugfs_remove(e->dentry_devinfo);
+ debugfs_remove(e->dentry_tsf);
+ debugfs_remove(e->dentry_txstat);
+ debugfs_remove(e->subdir);
+ kfree(e->xmitstatus_buffer);
+ kfree(e->xmitstatus_print_buffer);
+ kfree(e);
+}
+
+void bcm43xx_debugfs_log_txstat(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status)
+{
+ struct bcm43xx_dfsentry *e;
+ struct bcm43xx_xmitstatus *savedstatus;
+
+ /* This is protected by bcm->_lock */
+ e = bcm->dfsentry;
+ assert(e);
+ savedstatus = e->xmitstatus_buffer + e->xmitstatus_ptr;
+ memcpy(savedstatus, status, sizeof(*status));
+ e->xmitstatus_ptr++;
+ if (e->xmitstatus_ptr >= BCM43xx_NR_LOGGED_XMITSTATUS)
+ e->xmitstatus_ptr = 0;
+ if (e->xmitstatus_cnt < BCM43xx_NR_LOGGED_XMITSTATUS)
+ e->xmitstatus_cnt++;
+}
+
+void bcm43xx_debugfs_init(void)
+{
+ memset(&fs, 0, sizeof(fs));
+ fs.root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!fs.root)
+ printk(KERN_ERR PFX "debugfs: creating \"" KBUILD_MODNAME "\" subdir failed!\n");
+ fs.dentry_driverinfo = debugfs_create_file("driver", 0444, fs.root, NULL, &drvinfo_fops);
+ if (!fs.dentry_driverinfo)
+ printk(KERN_ERR PFX "debugfs: creating \"" KBUILD_MODNAME "/driver\" failed!\n");
+}
+
+void bcm43xx_debugfs_exit(void)
+{
+ debugfs_remove(fs.dentry_driverinfo);
+ debugfs_remove(fs.root);
+}
+
+void bcm43xx_printk_dump(const char *data,
+ size_t size,
+ const char *description)
+{
+ size_t i;
+ char c;
+
+ printk(KERN_INFO PFX "Data dump (%s, %u bytes):",
+ description, size);
+ for (i = 0; i < size; i++) {
+ c = data[i];
+ if (i % 8 == 0)
+ printk("\n" KERN_INFO PFX "0x%08x: 0x%02x, ", i, c & 0xff);
+ else
+ printk("0x%02x, ", c & 0xff);
+ }
+ printk("\n");
+}
+
+void bcm43xx_printk_bitdump(const unsigned char *data,
+ size_t bytes, int msb_to_lsb,
+ const char *description)
+{
+ size_t i;
+ int j;
+ const unsigned char *d;
+
+ printk(KERN_INFO PFX "*** Bitdump (%s, %u bytes, %s) ***",
+ description, bytes, msb_to_lsb ? "MSB to LSB" : "LSB to MSB");
+ for (i = 0; i < bytes; i++) {
+ d = data + i;
+ if (i % 8 == 0)
+ printk("\n" KERN_INFO PFX "0x%08x: ", i);
+ if (msb_to_lsb) {
+ for (j = 7; j >= 0; j--) {
+ if (*d & (1 << j))
+ printk("1");
+ else
+ printk("0");
+ }
+ } else {
+ for (j = 0; j < 8; j++) {
+ if (*d & (1 << j))
+ printk("1");
+ else
+ printk("0");
+ }
+ }
+ printk(" ");
+ }
+ printk("\n");
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
new file mode 100644
index 0000000..50ce267
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
@@ -0,0 +1,117 @@
+#ifndef BCM43xx_DEBUGFS_H_
+#define BCM43xx_DEBUGFS_H_
+
+struct bcm43xx_private;
+struct bcm43xx_xmitstatus;
+
+#ifdef CONFIG_BCM43XX_DEBUG
+
+#include <linux/list.h>
+#include <asm/semaphore.h>
+
+struct dentry;
+
+/* limited by the size of the "really_big_buffer" */
+#define BCM43xx_NR_LOGGED_XMITSTATUS 100
+
+struct bcm43xx_dfsentry {
+ struct dentry *subdir;
+ struct dentry *dentry_devinfo;
+ struct dentry *dentry_spromdump;
+ struct dentry *dentry_tsf;
+ struct dentry *dentry_txstat;
+
+ struct bcm43xx_private *bcm;
+
+ /* saved xmitstatus. */
+ struct bcm43xx_xmitstatus *xmitstatus_buffer;
+ int xmitstatus_ptr;
+ int xmitstatus_cnt;
+ /* We need a seperate buffer while printing to avoid
+ * concurrency issues. (New xmitstatus can arrive
+ * while we are printing).
+ */
+ struct bcm43xx_xmitstatus *xmitstatus_print_buffer;
+ int saved_xmitstatus_ptr;
+ int saved_xmitstatus_cnt;
+ int xmitstatus_printing;
+};
+
+struct bcm43xx_debugfs {
+ struct dentry *root;
+ struct dentry *dentry_driverinfo;
+};
+
+void bcm43xx_debugfs_init(void);
+void bcm43xx_debugfs_exit(void);
+void bcm43xx_debugfs_add_device(struct bcm43xx_private *bcm);
+void bcm43xx_debugfs_remove_device(struct bcm43xx_private *bcm);
+void bcm43xx_debugfs_log_txstat(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status);
+
+/* Debug helper: Dump binary data through printk. */
+void bcm43xx_printk_dump(const char *data,
+ size_t size,
+ const char *description);
+/* Debug helper: Dump bitwise binary data through printk. */
+void bcm43xx_printk_bitdump(const unsigned char *data,
+ size_t bytes, int msb_to_lsb,
+ const char *description);
+#define bcm43xx_printk_bitdumpt(pointer, msb_to_lsb, description) \
+ do { \
+ bcm43xx_printk_bitdump((const unsigned char *)(pointer), \
+ sizeof(*(pointer)), \
+ (msb_to_lsb), \
+ (description)); \
+ } while (0)
+
+#else /* CONFIG_BCM43XX_DEBUG*/
+
+static inline
+void bcm43xx_debugfs_init(void) { }
+static inline
+void bcm43xx_debugfs_exit(void) { }
+static inline
+void bcm43xx_debugfs_add_device(struct bcm43xx_private *bcm) { }
+static inline
+void bcm43xx_debugfs_remove_device(struct bcm43xx_private *bcm) { }
+static inline
+void bcm43xx_debugfs_log_txstat(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status) { }
+
+static inline
+void bcm43xx_printk_dump(const char *data,
+ size_t size,
+ const char *description)
+{
+}
+static inline
+void bcm43xx_printk_bitdump(const unsigned char *data,
+ size_t bytes, int msb_to_lsb,
+ const char *description)
+{
+}
+#define bcm43xx_printk_bitdumpt(pointer, msb_to_lsb, description) do { /* nothing */ } while (0)
+
+#endif /* CONFIG_BCM43XX_DEBUG*/
+
+/* Ugly helper macros to make incomplete code more verbose on runtime */
+#ifdef TODO
+# undef TODO
+#endif
+#define TODO() \
+ do { \
+ printk(KERN_INFO PFX "TODO: Incomplete code in %s() at %s:%d\n", \
+ __FUNCTION__, __FILE__, __LINE__); \
+ } while (0)
+
+#ifdef FIXME
+# undef FIXME
+#endif
+#define FIXME() \
+ do { \
+ printk(KERN_INFO PFX "FIXME: Possibly broken code in %s() at %s:%d\n", \
+ __FUNCTION__, __FILE__, __LINE__); \
+ } while (0)
+
+#endif /* BCM43xx_DEBUGFS_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
new file mode 100644
index 0000000..c3681b8
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -0,0 +1,968 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ DMA ringbuffer and descriptor allocation/management
+
+ Copyright (c) 2005 Michael Buesch <mbuesch@freenet.de>
+
+ Some code in this file is derived from the b44.c driver
+ Copyright (C) 2002 David S. Miller
+ Copyright (C) Pekka Pietikainen
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx.h"
+#include "bcm43xx_dma.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_debugfs.h"
+#include "bcm43xx_power.h"
+#include "bcm43xx_xmit.h"
+
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+
+
+static inline int free_slots(struct bcm43xx_dmaring *ring)
+{
+ return (ring->nr_slots - ring->used_slots);
+}
+
+static inline int next_slot(struct bcm43xx_dmaring *ring, int slot)
+{
+ assert(slot >= -1 && slot <= ring->nr_slots - 1);
+ if (slot == ring->nr_slots - 1)
+ return 0;
+ return slot + 1;
+}
+
+static inline int prev_slot(struct bcm43xx_dmaring *ring, int slot)
+{
+ assert(slot >= 0 && slot <= ring->nr_slots - 1);
+ if (slot == 0)
+ return ring->nr_slots - 1;
+ return slot - 1;
+}
+
+/* Request a slot for usage. */
+static inline
+int request_slot(struct bcm43xx_dmaring *ring)
+{
+ int slot;
+
+ assert(ring->tx);
+ assert(!ring->suspended);
+ assert(free_slots(ring) != 0);
+
+ slot = next_slot(ring, ring->current_slot);
+ ring->current_slot = slot;
+ ring->used_slots++;
+
+ /* Check the number of available slots and suspend TX,
+ * if we are running low on free slots.
+ */
+ if (unlikely(free_slots(ring) < ring->suspend_mark)) {
+ netif_stop_queue(ring->bcm->net_dev);
+ ring->suspended = 1;
+ }
+#ifdef CONFIG_BCM43XX_DEBUG
+ if (ring->used_slots > ring->max_used_slots)
+ ring->max_used_slots = ring->used_slots;
+#endif /* CONFIG_BCM43XX_DEBUG*/
+
+ return slot;
+}
+
+/* Return a slot to the free slots. */
+static inline
+void return_slot(struct bcm43xx_dmaring *ring, int slot)
+{
+ assert(ring->tx);
+
+ ring->used_slots--;
+
+ /* Check if TX is suspended and check if we have
+ * enough free slots to resume it again.
+ */
+ if (unlikely(ring->suspended)) {
+ if (free_slots(ring) >= ring->resume_mark) {
+ ring->suspended = 0;
+ netif_wake_queue(ring->bcm->net_dev);
+ }
+ }
+}
+
+static inline
+dma_addr_t map_descbuffer(struct bcm43xx_dmaring *ring,
+ unsigned char *buf,
+ size_t len,
+ int tx)
+{
+ dma_addr_t dmaaddr;
+
+ if (tx) {
+ dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
+ buf, len,
+ DMA_TO_DEVICE);
+ } else {
+ dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
+ buf, len,
+ DMA_FROM_DEVICE);
+ }
+
+ return dmaaddr;
+}
+
+static inline
+void unmap_descbuffer(struct bcm43xx_dmaring *ring,
+ dma_addr_t addr,
+ size_t len,
+ int tx)
+{
+ if (tx) {
+ dma_unmap_single(&ring->bcm->pci_dev->dev,
+ addr, len,
+ DMA_TO_DEVICE);
+ } else {
+ dma_unmap_single(&ring->bcm->pci_dev->dev,
+ addr, len,
+ DMA_FROM_DEVICE);
+ }
+}
+
+static inline
+void sync_descbuffer_for_cpu(struct bcm43xx_dmaring *ring,
+ dma_addr_t addr,
+ size_t len)
+{
+ assert(!ring->tx);
+
+ dma_sync_single_for_cpu(&ring->bcm->pci_dev->dev,
+ addr, len, DMA_FROM_DEVICE);
+}
+
+static inline
+void sync_descbuffer_for_device(struct bcm43xx_dmaring *ring,
+ dma_addr_t addr,
+ size_t len)
+{
+ assert(!ring->tx);
+
+ dma_sync_single_for_device(&ring->bcm->pci_dev->dev,
+ addr, len, DMA_FROM_DEVICE);
+}
+
+/* Unmap and free a descriptor buffer. */
+static inline
+void free_descriptor_buffer(struct bcm43xx_dmaring *ring,
+ struct bcm43xx_dmadesc *desc,
+ struct bcm43xx_dmadesc_meta *meta,
+ int irq_context)
+{
+ assert(meta->skb);
+ if (irq_context)
+ dev_kfree_skb_irq(meta->skb);
+ else
+ dev_kfree_skb(meta->skb);
+ meta->skb = NULL;
+}
+
+static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
+{
+ struct device *dev = &(ring->bcm->pci_dev->dev);
+
+ ring->vbase = dma_alloc_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
+ &(ring->dmabase), GFP_KERNEL);
+ if (!ring->vbase) {
+ printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
+ return -ENOMEM;
+ }
+ if (ring->dmabase + BCM43xx_DMA_RINGMEMSIZE > BCM43xx_DMA_BUSADDRMAX) {
+ printk(KERN_ERR PFX ">>>FATAL ERROR<<< DMA RINGMEMORY >1G "
+ "(0x%08x, len: %lu)\n",
+ ring->dmabase, BCM43xx_DMA_RINGMEMSIZE);
+ dma_free_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
+ ring->vbase, ring->dmabase);
+ return -ENOMEM;
+ }
+ assert(!(ring->dmabase & 0x000003FF));
+ memset(ring->vbase, 0, BCM43xx_DMA_RINGMEMSIZE);
+
+ return 0;
+}
+
+static void free_ringmemory(struct bcm43xx_dmaring *ring)
+{
+ struct device *dev = &(ring->bcm->pci_dev->dev);
+
+ dma_free_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
+ ring->vbase, ring->dmabase);
+}
+
+/* Reset the RX DMA channel */
+int bcm43xx_dmacontroller_rx_reset(struct bcm43xx_private *bcm,
+ u16 mmio_base)
+{
+ int i;
+ u32 value;
+
+ bcm43xx_write32(bcm,
+ mmio_base + BCM43xx_DMA_RX_CONTROL,
+ 0x00000000);
+ for (i = 0; i < 1000; i++) {
+ value = bcm43xx_read32(bcm,
+ mmio_base + BCM43xx_DMA_RX_STATUS);
+ value &= BCM43xx_DMA_RXSTAT_STAT_MASK;
+ if (value == BCM43xx_DMA_RXSTAT_STAT_DISABLED) {
+ i = -1;
+ break;
+ }
+ udelay(10);
+ }
+ if (i != -1) {
+ printk(KERN_ERR PFX "Error: Wait on DMA RX status timed out.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/* Reset the RX DMA channel */
+int bcm43xx_dmacontroller_tx_reset(struct bcm43xx_private *bcm,
+ u16 mmio_base)
+{
+ int i;
+ u32 value;
+
+ for (i = 0; i < 1000; i++) {
+ value = bcm43xx_read32(bcm,
+ mmio_base + BCM43xx_DMA_TX_STATUS);
+ value &= BCM43xx_DMA_TXSTAT_STAT_MASK;
+ if (value == BCM43xx_DMA_TXSTAT_STAT_DISABLED ||
+ value == BCM43xx_DMA_TXSTAT_STAT_IDLEWAIT ||
+ value == BCM43xx_DMA_TXSTAT_STAT_STOPPED)
+ break;
+ udelay(10);
+ }
+ bcm43xx_write32(bcm,
+ mmio_base + BCM43xx_DMA_TX_CONTROL,
+ 0x00000000);
+ for (i = 0; i < 1000; i++) {
+ value = bcm43xx_read32(bcm,
+ mmio_base + BCM43xx_DMA_TX_STATUS);
+ value &= BCM43xx_DMA_TXSTAT_STAT_MASK;
+ if (value == BCM43xx_DMA_TXSTAT_STAT_DISABLED) {
+ i = -1;
+ break;
+ }
+ udelay(10);
+ }
+ if (i != -1) {
+ printk(KERN_ERR PFX "Error: Wait on DMA TX status timed out.\n");
+ return -ENODEV;
+ }
+ /* ensure the reset is completed. */
+ udelay(300);
+
+ return 0;
+}
+
+static int setup_rx_descbuffer(struct bcm43xx_dmaring *ring,
+ struct bcm43xx_dmadesc *desc,
+ struct bcm43xx_dmadesc_meta *meta,
+ gfp_t gfp_flags)
+{
+ struct bcm43xx_rxhdr *rxhdr;
+ dma_addr_t dmaaddr;
+ u32 desc_addr;
+ u32 desc_ctl;
+ const int slot = (int)(desc - ring->vbase);
+ struct sk_buff *skb;
+
+ assert(slot >= 0 && slot < ring->nr_slots);
+ assert(!ring->tx);
+
+ skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
+ if (unlikely(!skb))
+ return -ENOMEM;
+ dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
+ if (unlikely(dmaaddr + ring->rx_buffersize > BCM43xx_DMA_BUSADDRMAX)) {
+ unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
+ dev_kfree_skb_any(skb);
+ printk(KERN_ERR PFX ">>>FATAL ERROR<<< DMA RX SKB >1G "
+ "(0x%08x, len: %u)\n",
+ dmaaddr, ring->rx_buffersize);
+ return -ENOMEM;
+ }
+ meta->skb = skb;
+ meta->dmaaddr = dmaaddr;
+ skb->dev = ring->bcm->net_dev;
+ desc_addr = (u32)(dmaaddr + ring->memoffset);
+ desc_ctl = (BCM43xx_DMADTOR_BYTECNT_MASK &
+ (u32)(ring->rx_buffersize - ring->frameoffset));
+ if (slot == ring->nr_slots - 1)
+ desc_ctl |= BCM43xx_DMADTOR_DTABLEEND;
+ set_desc_addr(desc, desc_addr);
+ set_desc_ctl(desc, desc_ctl);
+
+ rxhdr = (struct bcm43xx_rxhdr *)(skb->data);
+ rxhdr->frame_length = 0;
+ rxhdr->flags1 = 0;
+
+ return 0;
+}
+
+/* Allocate the initial descbuffers.
+ * This is used for an RX ring only.
+ */
+static int alloc_initial_descbuffers(struct bcm43xx_dmaring *ring)
+{
+ int i, err = -ENOMEM;
+ struct bcm43xx_dmadesc *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+
+ for (i = 0; i < ring->nr_slots; i++) {
+ desc = ring->vbase + i;
+ meta = ring->meta + i;
+
+ err = setup_rx_descbuffer(ring, desc, meta, GFP_KERNEL);
+ if (err)
+ goto err_unwind;
+ }
+ ring->used_slots = ring->nr_slots;
+ err = 0;
+out:
+ return err;
+
+err_unwind:
+ for (i--; i >= 0; i--) {
+ desc = ring->vbase + i;
+ meta = ring->meta + i;
+
+ unmap_descbuffer(ring, meta->dmaaddr, ring->rx_buffersize, 0);
+ dev_kfree_skb(meta->skb);
+ }
+ goto out;
+}
+
+/* Do initial setup of the DMA controller.
+ * Reset the controller, write the ring busaddress
+ * and switch the "enable" bit on.
+ */
+static int dmacontroller_setup(struct bcm43xx_dmaring *ring)
+{
+ int err = 0;
+ u32 value;
+
+ if (ring->tx) {
+ /* Set Transmit Control register to "transmit enable" */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_CONTROL,
+ BCM43xx_DMA_TXCTRL_ENABLE);
+ /* Set Transmit Descriptor ring address. */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_DESC_RING,
+ ring->dmabase + ring->memoffset);
+ } else {
+ err = alloc_initial_descbuffers(ring);
+ if (err)
+ goto out;
+ /* Set Receive Control "receive enable" and frame offset */
+ value = (ring->frameoffset << BCM43xx_DMA_RXCTRL_FRAMEOFF_SHIFT);
+ value |= BCM43xx_DMA_RXCTRL_ENABLE;
+ bcm43xx_dma_write(ring, BCM43xx_DMA_RX_CONTROL, value);
+ /* Set Receive Descriptor ring address. */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_RX_DESC_RING,
+ ring->dmabase + ring->memoffset);
+ /* Init the descriptor pointer. */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_RX_DESC_INDEX, 200);
+ }
+
+out:
+ return err;
+}
+
+/* Shutdown the DMA controller. */
+static void dmacontroller_cleanup(struct bcm43xx_dmaring *ring)
+{
+ if (ring->tx) {
+ bcm43xx_dmacontroller_tx_reset(ring->bcm, ring->mmio_base);
+ /* Zero out Transmit Descriptor ring address. */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_DESC_RING, 0);
+ } else {
+ bcm43xx_dmacontroller_rx_reset(ring->bcm, ring->mmio_base);
+ /* Zero out Receive Descriptor ring address. */
+ bcm43xx_dma_write(ring, BCM43xx_DMA_RX_DESC_RING, 0);
+ }
+}
+
+static void free_all_descbuffers(struct bcm43xx_dmaring *ring)
+{
+ struct bcm43xx_dmadesc *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+ int i;
+
+ if (!ring->used_slots)
+ return;
+ for (i = 0; i < ring->nr_slots; i++) {
+ desc = ring->vbase + i;
+ meta = ring->meta + i;
+
+ if (!meta->skb) {
+ assert(ring->tx);
+ continue;
+ }
+ if (ring->tx) {
+ unmap_descbuffer(ring, meta->dmaaddr,
+ meta->skb->len, 1);
+ } else {
+ unmap_descbuffer(ring, meta->dmaaddr,
+ ring->rx_buffersize, 0);
+ }
+ free_descriptor_buffer(ring, desc, meta, 0);
+ }
+}
+
+/* Main initialization function. */
+static
+struct bcm43xx_dmaring * bcm43xx_setup_dmaring(struct bcm43xx_private *bcm,
+ u16 dma_controller_base,
+ int nr_descriptor_slots,
+ int tx)
+{
+ struct bcm43xx_dmaring *ring;
+ int err;
+
+ ring = kzalloc(sizeof(*ring), GFP_KERNEL);
+ if (!ring)
+ goto out;
+
+ ring->meta = kzalloc(sizeof(*ring->meta) * nr_descriptor_slots,
+ GFP_KERNEL);
+ if (!ring->meta)
+ goto err_kfree_ring;
+
+ ring->memoffset = BCM43xx_DMA_DMABUSADDROFFSET;
+#ifdef CONFIG_BCM947XX
+ if (bcm->pci_dev->bus->number == 0)
+ ring->memoffset = 0;
+#endif
+
+ ring->bcm = bcm;
+ ring->nr_slots = nr_descriptor_slots;
+ ring->suspend_mark = ring->nr_slots * BCM43xx_TXSUSPEND_PERCENT / 100;
+ ring->resume_mark = ring->nr_slots * BCM43xx_TXRESUME_PERCENT / 100;
+ assert(ring->suspend_mark < ring->resume_mark);
+ ring->mmio_base = dma_controller_base;
+ if (tx) {
+ ring->tx = 1;
+ ring->current_slot = -1;
+ } else {
+ switch (dma_controller_base) {
+ case BCM43xx_MMIO_DMA1_BASE:
+ ring->rx_buffersize = BCM43xx_DMA1_RXBUFFERSIZE;
+ ring->frameoffset = BCM43xx_DMA1_RX_FRAMEOFFSET;
+ break;
+ case BCM43xx_MMIO_DMA4_BASE:
+ ring->rx_buffersize = BCM43xx_DMA4_RXBUFFERSIZE;
+ ring->frameoffset = BCM43xx_DMA4_RX_FRAMEOFFSET;
+ break;
+ default:
+ assert(0);
+ }
+ }
+
+ err = alloc_ringmemory(ring);
+ if (err)
+ goto err_kfree_meta;
+ err = dmacontroller_setup(ring);
+ if (err)
+ goto err_free_ringmemory;
+
+out:
+ return ring;
+
+err_free_ringmemory:
+ free_ringmemory(ring);
+err_kfree_meta:
+ kfree(ring->meta);
+err_kfree_ring:
+ kfree(ring);
+ ring = NULL;
+ goto out;
+}
+
+/* Main cleanup function. */
+static void bcm43xx_destroy_dmaring(struct bcm43xx_dmaring *ring)
+{
+ if (!ring)
+ return;
+
+ dprintk(KERN_INFO PFX "DMA 0x%04x (%s) max used slots: %d/%d\n",
+ ring->mmio_base,
+ (ring->tx) ? "TX" : "RX",
+ ring->max_used_slots, ring->nr_slots);
+ /* Device IRQs are disabled prior entering this function,
+ * so no need to take care of concurrency with rx handler stuff.
+ */
+ dmacontroller_cleanup(ring);
+ free_all_descbuffers(ring);
+ free_ringmemory(ring);
+
+ kfree(ring->meta);
+ kfree(ring);
+}
+
+void bcm43xx_dma_free(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_dma *dma;
+
+ if (bcm43xx_using_pio(bcm))
+ return;
+ dma = bcm43xx_current_dma(bcm);
+
+ bcm43xx_destroy_dmaring(dma->rx_ring1);
+ dma->rx_ring1 = NULL;
+ bcm43xx_destroy_dmaring(dma->rx_ring0);
+ dma->rx_ring0 = NULL;
+ bcm43xx_destroy_dmaring(dma->tx_ring3);
+ dma->tx_ring3 = NULL;
+ bcm43xx_destroy_dmaring(dma->tx_ring2);
+ dma->tx_ring2 = NULL;
+ bcm43xx_destroy_dmaring(dma->tx_ring1);
+ dma->tx_ring1 = NULL;
+ bcm43xx_destroy_dmaring(dma->tx_ring0);
+ dma->tx_ring0 = NULL;
+}
+
+int bcm43xx_dma_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_dma *dma = bcm43xx_current_dma(bcm);
+ struct bcm43xx_dmaring *ring;
+ int err = -ENOMEM;
+
+ /* setup TX DMA channels. */
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA1_BASE,
+ BCM43xx_TXRING_SLOTS, 1);
+ if (!ring)
+ goto out;
+ dma->tx_ring0 = ring;
+
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA2_BASE,
+ BCM43xx_TXRING_SLOTS, 1);
+ if (!ring)
+ goto err_destroy_tx0;
+ dma->tx_ring1 = ring;
+
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA3_BASE,
+ BCM43xx_TXRING_SLOTS, 1);
+ if (!ring)
+ goto err_destroy_tx1;
+ dma->tx_ring2 = ring;
+
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA4_BASE,
+ BCM43xx_TXRING_SLOTS, 1);
+ if (!ring)
+ goto err_destroy_tx2;
+ dma->tx_ring3 = ring;
+
+ /* setup RX DMA channels. */
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA1_BASE,
+ BCM43xx_RXRING_SLOTS, 0);
+ if (!ring)
+ goto err_destroy_tx3;
+ dma->rx_ring0 = ring;
+
+ if (bcm->current_core->rev < 5) {
+ ring = bcm43xx_setup_dmaring(bcm, BCM43xx_MMIO_DMA4_BASE,
+ BCM43xx_RXRING_SLOTS, 0);
+ if (!ring)
+ goto err_destroy_rx0;
+ dma->rx_ring1 = ring;
+ }
+
+ dprintk(KERN_INFO PFX "DMA initialized\n");
+ err = 0;
+out:
+ return err;
+
+err_destroy_rx0:
+ bcm43xx_destroy_dmaring(dma->rx_ring0);
+ dma->rx_ring0 = NULL;
+err_destroy_tx3:
+ bcm43xx_destroy_dmaring(dma->tx_ring3);
+ dma->tx_ring3 = NULL;
+err_destroy_tx2:
+ bcm43xx_destroy_dmaring(dma->tx_ring2);
+ dma->tx_ring2 = NULL;
+err_destroy_tx1:
+ bcm43xx_destroy_dmaring(dma->tx_ring1);
+ dma->tx_ring1 = NULL;
+err_destroy_tx0:
+ bcm43xx_destroy_dmaring(dma->tx_ring0);
+ dma->tx_ring0 = NULL;
+ goto out;
+}
+
+/* Generate a cookie for the TX header. */
+static u16 generate_cookie(struct bcm43xx_dmaring *ring,
+ int slot)
+{
+ u16 cookie = 0x0000;
+
+ /* Use the upper 4 bits of the cookie as
+ * DMA controller ID and store the slot number
+ * in the lower 12 bits
+ */
+ switch (ring->mmio_base) {
+ default:
+ assert(0);
+ case BCM43xx_MMIO_DMA1_BASE:
+ break;
+ case BCM43xx_MMIO_DMA2_BASE:
+ cookie = 0x1000;
+ break;
+ case BCM43xx_MMIO_DMA3_BASE:
+ cookie = 0x2000;
+ break;
+ case BCM43xx_MMIO_DMA4_BASE:
+ cookie = 0x3000;
+ break;
+ }
+ assert(((u16)slot & 0xF000) == 0x0000);
+ cookie |= (u16)slot;
+
+ return cookie;
+}
+
+/* Inspect a cookie and find out to which controller/slot it belongs. */
+static
+struct bcm43xx_dmaring * parse_cookie(struct bcm43xx_private *bcm,
+ u16 cookie, int *slot)
+{
+ struct bcm43xx_dma *dma = bcm43xx_current_dma(bcm);
+ struct bcm43xx_dmaring *ring = NULL;
+
+ switch (cookie & 0xF000) {
+ case 0x0000:
+ ring = dma->tx_ring0;
+ break;
+ case 0x1000:
+ ring = dma->tx_ring1;
+ break;
+ case 0x2000:
+ ring = dma->tx_ring2;
+ break;
+ case 0x3000:
+ ring = dma->tx_ring3;
+ break;
+ default:
+ assert(0);
+ }
+ *slot = (cookie & 0x0FFF);
+ assert(*slot >= 0 && *slot < ring->nr_slots);
+
+ return ring;
+}
+
+static void dmacontroller_poke_tx(struct bcm43xx_dmaring *ring,
+ int slot)
+{
+ /* Everything is ready to start. Buffers are DMA mapped and
+ * associated with slots.
+ * "slot" is the last slot of the new frame we want to transmit.
+ * Close your seat belts now, please.
+ */
+ wmb();
+ slot = next_slot(ring, slot);
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_DESC_INDEX,
+ (u32)(slot * sizeof(struct bcm43xx_dmadesc)));
+}
+
+static int dma_tx_fragment(struct bcm43xx_dmaring *ring,
+ struct sk_buff *skb,
+ u8 cur_frag)
+{
+ int slot;
+ struct bcm43xx_dmadesc *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+ u32 desc_ctl;
+ u32 desc_addr;
+
+ assert(skb_shinfo(skb)->nr_frags == 0);
+
+ slot = request_slot(ring);
+ desc = ring->vbase + slot;
+ meta = ring->meta + slot;
+
+ /* Add a device specific TX header. */
+ assert(skb_headroom(skb) >= sizeof(struct bcm43xx_txhdr));
+ /* Reserve enough headroom for the device tx header. */
+ __skb_push(skb, sizeof(struct bcm43xx_txhdr));
+ /* Now calculate and add the tx header.
+ * The tx header includes the PLCP header.
+ */
+ bcm43xx_generate_txhdr(ring->bcm,
+ (struct bcm43xx_txhdr *)skb->data,
+ skb->data + sizeof(struct bcm43xx_txhdr),
+ skb->len - sizeof(struct bcm43xx_txhdr),
+ (cur_frag == 0),
+ generate_cookie(ring, slot));
+
+ meta->skb = skb;
+ meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
+ if (unlikely(meta->dmaaddr + skb->len > BCM43xx_DMA_BUSADDRMAX)) {
+ return_slot(ring, slot);
+ printk(KERN_ERR PFX ">>>FATAL ERROR<<< DMA TX SKB >1G "
+ "(0x%08x, len: %u)\n",
+ meta->dmaaddr, skb->len);
+ return -ENOMEM;
+ }
+
+ desc_addr = (u32)(meta->dmaaddr + ring->memoffset);
+ desc_ctl = BCM43xx_DMADTOR_FRAMESTART | BCM43xx_DMADTOR_FRAMEEND;
+ desc_ctl |= BCM43xx_DMADTOR_COMPIRQ;
+ desc_ctl |= (BCM43xx_DMADTOR_BYTECNT_MASK &
+ (u32)(meta->skb->len - ring->frameoffset));
+ if (slot == ring->nr_slots - 1)
+ desc_ctl |= BCM43xx_DMADTOR_DTABLEEND;
+
+ set_desc_ctl(desc, desc_ctl);
+ set_desc_addr(desc, desc_addr);
+ /* Now transfer the whole frame. */
+ dmacontroller_poke_tx(ring, slot);
+
+ return 0;
+}
+
+int bcm43xx_dma_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb)
+{
+ /* We just received a packet from the kernel network subsystem.
+ * Add headers and DMA map the memory. Poke
+ * the device to send the stuff.
+ * Note that this is called from atomic context.
+ */
+ struct bcm43xx_dmaring *ring = bcm43xx_current_dma(bcm)->tx_ring1;
+ u8 i;
+ struct sk_buff *skb;
+
+ assert(ring->tx);
+ if (unlikely(free_slots(ring) < txb->nr_frags)) {
+ /* The queue should be stopped,
+ * if we are low on free slots.
+ * If this ever triggers, we have to lower the suspend_mark.
+ */
+ dprintkl(KERN_ERR PFX "Out of DMA descriptor slots!\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < txb->nr_frags; i++) {
+ skb = txb->fragments[i];
+ /* Take skb from ieee80211_txb_free */
+ txb->fragments[i] = NULL;
+ dma_tx_fragment(ring, skb, i);
+ //TODO: handle failure of dma_tx_fragment
+ }
+ ieee80211_txb_free(txb);
+
+ return 0;
+}
+
+void bcm43xx_dma_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status)
+{
+ struct bcm43xx_dmaring *ring;
+ struct bcm43xx_dmadesc *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+ int is_last_fragment;
+ int slot;
+
+ ring = parse_cookie(bcm, status->cookie, &slot);
+ assert(ring);
+ assert(ring->tx);
+ assert(get_desc_ctl(ring->vbase + slot) & BCM43xx_DMADTOR_FRAMESTART);
+ while (1) {
+ assert(slot >= 0 && slot < ring->nr_slots);
+ desc = ring->vbase + slot;
+ meta = ring->meta + slot;
+
+ is_last_fragment = !!(get_desc_ctl(desc) & BCM43xx_DMADTOR_FRAMEEND);
+ unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+ free_descriptor_buffer(ring, desc, meta, 1);
+ /* Everything belonging to the slot is unmapped
+ * and freed, so we can return it.
+ */
+ return_slot(ring, slot);
+
+ if (is_last_fragment)
+ break;
+ slot = next_slot(ring, slot);
+ }
+ bcm->stats.last_tx = jiffies;
+}
+
+static void dma_rx(struct bcm43xx_dmaring *ring,
+ int *slot)
+{
+ struct bcm43xx_dmadesc *desc;
+ struct bcm43xx_dmadesc_meta *meta;
+ struct bcm43xx_rxhdr *rxhdr;
+ struct sk_buff *skb;
+ u16 len;
+ int err;
+ dma_addr_t dmaaddr;
+
+ desc = ring->vbase + *slot;
+ meta = ring->meta + *slot;
+
+ sync_descbuffer_for_cpu(ring, meta->dmaaddr, ring->rx_buffersize);
+ skb = meta->skb;
+
+ if (ring->mmio_base == BCM43xx_MMIO_DMA4_BASE) {
+ /* We received an xmit status. */
+ struct bcm43xx_hwxmitstatus *hw = (struct bcm43xx_hwxmitstatus *)skb->data;
+ struct bcm43xx_xmitstatus stat;
+
+ stat.cookie = le16_to_cpu(hw->cookie);
+ stat.flags = hw->flags;
+ stat.cnt1 = hw->cnt1;
+ stat.cnt2 = hw->cnt2;
+ stat.seq = le16_to_cpu(hw->seq);
+ stat.unknown = le16_to_cpu(hw->unknown);
+
+ bcm43xx_debugfs_log_txstat(ring->bcm, &stat);
+ bcm43xx_dma_handle_xmitstatus(ring->bcm, &stat);
+ /* recycle the descriptor buffer. */
+ sync_descbuffer_for_device(ring, meta->dmaaddr, ring->rx_buffersize);
+
+ return;
+ }
+ rxhdr = (struct bcm43xx_rxhdr *)skb->data;
+ len = le16_to_cpu(rxhdr->frame_length);
+ if (len == 0) {
+ int i = 0;
+
+ do {
+ udelay(2);
+ barrier();
+ len = le16_to_cpu(rxhdr->frame_length);
+ } while (len == 0 && i++ < 5);
+ if (unlikely(len == 0)) {
+ /* recycle the descriptor buffer. */
+ sync_descbuffer_for_device(ring, meta->dmaaddr,
+ ring->rx_buffersize);
+ goto drop;
+ }
+ }
+ if (unlikely(len > ring->rx_buffersize)) {
+ /* The data did not fit into one descriptor buffer
+ * and is split over multiple buffers.
+ * This should never happen, as we try to allocate buffers
+ * big enough. So simply ignore this packet.
+ */
+ int cnt = 0;
+ s32 tmp = len;
+
+ while (1) {
+ desc = ring->vbase + *slot;
+ meta = ring->meta + *slot;
+ /* recycle the descriptor buffer. */
+ sync_descbuffer_for_device(ring, meta->dmaaddr,
+ ring->rx_buffersize);
+ *slot = next_slot(ring, *slot);
+ cnt++;
+ tmp -= ring->rx_buffersize;
+ if (tmp <= 0)
+ break;
+ }
+ printkl(KERN_ERR PFX "DMA RX buffer too small "
+ "(len: %u, buffer: %u, nr-dropped: %d)\n",
+ len, ring->rx_buffersize, cnt);
+ goto drop;
+ }
+ len -= IEEE80211_FCS_LEN;
+
+ dmaaddr = meta->dmaaddr;
+ err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC);
+ if (unlikely(err)) {
+ dprintkl(KERN_ERR PFX "DMA RX: setup_rx_descbuffer() failed\n");
+ sync_descbuffer_for_device(ring, dmaaddr,
+ ring->rx_buffersize);
+ goto drop;
+ }
+
+ unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
+ skb_put(skb, len + ring->frameoffset);
+ skb_pull(skb, ring->frameoffset);
+
+ err = bcm43xx_rx(ring->bcm, skb, rxhdr);
+ if (err) {
+ dev_kfree_skb_irq(skb);
+ goto drop;
+ }
+
+drop:
+ return;
+}
+
+void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring)
+{
+ u32 status;
+ u16 descptr;
+ int slot, current_slot;
+#ifdef CONFIG_BCM43XX_DEBUG
+ int used_slots = 0;
+#endif
+
+ assert(!ring->tx);
+ status = bcm43xx_dma_read(ring, BCM43xx_DMA_RX_STATUS);
+ descptr = (status & BCM43xx_DMA_RXSTAT_DPTR_MASK);
+ current_slot = descptr / sizeof(struct bcm43xx_dmadesc);
+ assert(current_slot >= 0 && current_slot < ring->nr_slots);
+
+ slot = ring->current_slot;
+ for ( ; slot != current_slot; slot = next_slot(ring, slot)) {
+ dma_rx(ring, &slot);
+#ifdef CONFIG_BCM43XX_DEBUG
+ if (++used_slots > ring->max_used_slots)
+ ring->max_used_slots = used_slots;
+#endif
+ }
+ bcm43xx_dma_write(ring, BCM43xx_DMA_RX_DESC_INDEX,
+ (u32)(slot * sizeof(struct bcm43xx_dmadesc)));
+ ring->current_slot = slot;
+}
+
+void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring)
+{
+ assert(ring->tx);
+ bcm43xx_power_saving_ctl_bits(ring->bcm, -1, 1);
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_CONTROL,
+ bcm43xx_dma_read(ring, BCM43xx_DMA_TX_CONTROL)
+ | BCM43xx_DMA_TXCTRL_SUSPEND);
+}
+
+void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring)
+{
+ assert(ring->tx);
+ bcm43xx_dma_write(ring, BCM43xx_DMA_TX_CONTROL,
+ bcm43xx_dma_read(ring, BCM43xx_DMA_TX_CONTROL)
+ & ~BCM43xx_DMA_TXCTRL_SUSPEND);
+ bcm43xx_power_saving_ctl_bits(ring->bcm, -1, -1);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
new file mode 100644
index 0000000..2d520e4
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
@@ -0,0 +1,218 @@
+#ifndef BCM43xx_DMA_H_
+#define BCM43xx_DMA_H_
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/linkage.h>
+#include <asm/atomic.h>
+
+
+/* DMA-Interrupt reasons. */
+#define BCM43xx_DMAIRQ_FATALMASK ((1 << 10) | (1 << 11) | (1 << 12) \
+ | (1 << 14) | (1 << 15))
+#define BCM43xx_DMAIRQ_NONFATALMASK (1 << 13)
+#define BCM43xx_DMAIRQ_RX_DONE (1 << 16)
+
+/* DMA controller register offsets. (relative to BCM43xx_DMA#_BASE) */
+#define BCM43xx_DMA_TX_CONTROL 0x00
+#define BCM43xx_DMA_TX_DESC_RING 0x04
+#define BCM43xx_DMA_TX_DESC_INDEX 0x08
+#define BCM43xx_DMA_TX_STATUS 0x0c
+#define BCM43xx_DMA_RX_CONTROL 0x10
+#define BCM43xx_DMA_RX_DESC_RING 0x14
+#define BCM43xx_DMA_RX_DESC_INDEX 0x18
+#define BCM43xx_DMA_RX_STATUS 0x1c
+
+/* DMA controller channel control word values. */
+#define BCM43xx_DMA_TXCTRL_ENABLE (1 << 0)
+#define BCM43xx_DMA_TXCTRL_SUSPEND (1 << 1)
+#define BCM43xx_DMA_TXCTRL_LOOPBACK (1 << 2)
+#define BCM43xx_DMA_TXCTRL_FLUSH (1 << 4)
+#define BCM43xx_DMA_RXCTRL_ENABLE (1 << 0)
+#define BCM43xx_DMA_RXCTRL_FRAMEOFF_MASK 0x000000fe
+#define BCM43xx_DMA_RXCTRL_FRAMEOFF_SHIFT 1
+#define BCM43xx_DMA_RXCTRL_PIO (1 << 8)
+/* DMA controller channel status word values. */
+#define BCM43xx_DMA_TXSTAT_DPTR_MASK 0x00000fff
+#define BCM43xx_DMA_TXSTAT_STAT_MASK 0x0000f000
+#define BCM43xx_DMA_TXSTAT_STAT_DISABLED 0x00000000
+#define BCM43xx_DMA_TXSTAT_STAT_ACTIVE 0x00001000
+#define BCM43xx_DMA_TXSTAT_STAT_IDLEWAIT 0x00002000
+#define BCM43xx_DMA_TXSTAT_STAT_STOPPED 0x00003000
+#define BCM43xx_DMA_TXSTAT_STAT_SUSP 0x00004000
+#define BCM43xx_DMA_TXSTAT_ERROR_MASK 0x000f0000
+#define BCM43xx_DMA_TXSTAT_FLUSHED (1 << 20)
+#define BCM43xx_DMA_RXSTAT_DPTR_MASK 0x00000fff
+#define BCM43xx_DMA_RXSTAT_STAT_MASK 0x0000f000
+#define BCM43xx_DMA_RXSTAT_STAT_DISABLED 0x00000000
+#define BCM43xx_DMA_RXSTAT_STAT_ACTIVE 0x00001000
+#define BCM43xx_DMA_RXSTAT_STAT_IDLEWAIT 0x00002000
+#define BCM43xx_DMA_RXSTAT_STAT_RESERVED 0x00003000
+#define BCM43xx_DMA_RXSTAT_STAT_ERRORS 0x00004000
+#define BCM43xx_DMA_RXSTAT_ERROR_MASK 0x000f0000
+
+/* DMA descriptor control field values. */
+#define BCM43xx_DMADTOR_BYTECNT_MASK 0x00001fff
+#define BCM43xx_DMADTOR_DTABLEEND (1 << 28) /* End of descriptor table */
+#define BCM43xx_DMADTOR_COMPIRQ (1 << 29) /* IRQ on completion request */
+#define BCM43xx_DMADTOR_FRAMEEND (1 << 30)
+#define BCM43xx_DMADTOR_FRAMESTART (1 << 31)
+
+/* Misc DMA constants */
+#define BCM43xx_DMA_RINGMEMSIZE PAGE_SIZE
+#define BCM43xx_DMA_BUSADDRMAX 0x3FFFFFFF
+#define BCM43xx_DMA_DMABUSADDROFFSET (1 << 30)
+#define BCM43xx_DMA1_RX_FRAMEOFFSET 30
+#define BCM43xx_DMA4_RX_FRAMEOFFSET 0
+
+/* DMA engine tuning knobs */
+#define BCM43xx_TXRING_SLOTS 512
+#define BCM43xx_RXRING_SLOTS 64
+#define BCM43xx_DMA1_RXBUFFERSIZE (2304 + 100)
+#define BCM43xx_DMA4_RXBUFFERSIZE 16
+/* Suspend the tx queue, if less than this percent slots are free. */
+#define BCM43xx_TXSUSPEND_PERCENT 20
+/* Resume the tx queue, if more than this percent slots are free. */
+#define BCM43xx_TXRESUME_PERCENT 50
+
+
+
+#ifdef CONFIG_BCM43XX_DMA
+
+
+struct sk_buff;
+struct bcm43xx_private;
+struct bcm43xx_xmitstatus;
+
+
+struct bcm43xx_dmadesc {
+ __le32 _control;
+ __le32 _address;
+} __attribute__((__packed__));
+
+/* Macros to access the bcm43xx_dmadesc struct */
+#define get_desc_ctl(desc) le32_to_cpu((desc)->_control)
+#define set_desc_ctl(desc, ctl) do { (desc)->_control = cpu_to_le32(ctl); } while (0)
+#define get_desc_addr(desc) le32_to_cpu((desc)->_address)
+#define set_desc_addr(desc, addr) do { (desc)->_address = cpu_to_le32(addr); } while (0)
+
+struct bcm43xx_dmadesc_meta {
+ /* The kernel DMA-able buffer. */
+ struct sk_buff *skb;
+ /* DMA base bus-address of the descriptor buffer. */
+ dma_addr_t dmaaddr;
+};
+
+struct bcm43xx_dmaring {
+ struct bcm43xx_private *bcm;
+ /* Kernel virtual base address of the ring memory. */
+ struct bcm43xx_dmadesc *vbase;
+ /* DMA memory offset */
+ dma_addr_t memoffset;
+ /* (Unadjusted) DMA base bus-address of the ring memory. */
+ dma_addr_t dmabase;
+ /* Meta data about all descriptors. */
+ struct bcm43xx_dmadesc_meta *meta;
+ /* Number of descriptor slots in the ring. */
+ int nr_slots;
+ /* Number of used descriptor slots. */
+ int used_slots;
+ /* Currently used slot in the ring. */
+ int current_slot;
+ /* Marks to suspend/resume the queue. */
+ int suspend_mark;
+ int resume_mark;
+ /* Frameoffset in octets. */
+ u32 frameoffset;
+ /* Descriptor buffer size. */
+ u16 rx_buffersize;
+ /* The MMIO base register of the DMA controller, this
+ * ring is posted to.
+ */
+ u16 mmio_base;
+ u8 tx:1, /* TRUE, if this is a TX ring. */
+ suspended:1; /* TRUE, if transfers are suspended on this ring. */
+#ifdef CONFIG_BCM43XX_DEBUG
+ /* Maximum number of used slots. */
+ int max_used_slots;
+#endif /* CONFIG_BCM43XX_DEBUG*/
+};
+
+
+static inline
+u32 bcm43xx_dma_read(struct bcm43xx_dmaring *ring,
+ u16 offset)
+{
+ return bcm43xx_read32(ring->bcm, ring->mmio_base + offset);
+}
+
+static inline
+void bcm43xx_dma_write(struct bcm43xx_dmaring *ring,
+ u16 offset, u32 value)
+{
+ bcm43xx_write32(ring->bcm, ring->mmio_base + offset, value);
+}
+
+
+int bcm43xx_dma_init(struct bcm43xx_private *bcm);
+void bcm43xx_dma_free(struct bcm43xx_private *bcm);
+
+int bcm43xx_dmacontroller_rx_reset(struct bcm43xx_private *bcm,
+ u16 dmacontroller_mmio_base);
+int bcm43xx_dmacontroller_tx_reset(struct bcm43xx_private *bcm,
+ u16 dmacontroller_mmio_base);
+
+void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring);
+void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring);
+
+void bcm43xx_dma_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status);
+
+int bcm43xx_dma_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb);
+void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring);
+
+
+#else /* CONFIG_BCM43XX_DMA */
+
+
+static inline
+int bcm43xx_dma_init(struct bcm43xx_private *bcm)
+{
+ return 0;
+}
+static inline
+void bcm43xx_dma_free(struct bcm43xx_private *bcm)
+{
+}
+static inline
+int bcm43xx_dmacontroller_rx_reset(struct bcm43xx_private *bcm,
+ u16 dmacontroller_mmio_base)
+{
+ return 0;
+}
+static inline
+int bcm43xx_dmacontroller_tx_reset(struct bcm43xx_private *bcm,
+ u16 dmacontroller_mmio_base)
+{
+ return 0;
+}
+static inline
+int bcm43xx_dma_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb)
+{
+ return 0;
+}
+static inline
+void bcm43xx_dma_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status)
+{
+}
+static inline
+void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring)
+{
+}
+
+#endif /* CONFIG_BCM43XX_DMA */
+#endif /* BCM43xx_DMA_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.c b/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.c
new file mode 100644
index 0000000..b3ffcf5
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.c
@@ -0,0 +1,50 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ ethtool support
+
+ Copyright (c) 2006 Jason Lunz <lunz@falooley.org>
+
+ Some code in this file is derived from the 8139too.c driver
+ Copyright (C) 2002 Jeff Garzik
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx.h"
+#include "bcm43xx_ethtool.h"
+
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/version.h>
+
+
+static void bcm43xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(dev);
+
+ strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+ strncpy(info->version, UTS_RELEASE, sizeof(info->version));
+ strncpy(info->bus_info, pci_name(bcm->pci_dev), ETHTOOL_BUSINFO_LEN);
+}
+
+struct ethtool_ops bcm43xx_ethtool_ops = {
+ .get_drvinfo = bcm43xx_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.h b/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.h
new file mode 100644
index 0000000..8137049
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_ethtool.h
@@ -0,0 +1,8 @@
+#ifndef BCM43xx_ETHTOOL_H_
+#define BCM43xx_ETHTOOL_H_
+
+#include <linux/ethtool.h>
+
+extern struct ethtool_ops bcm43xx_ethtool_ops;
+
+#endif /* BCM43xx_ETHTOOL_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_ilt.c b/drivers/net/wireless/bcm43xx/bcm43xx_ilt.c
new file mode 100644
index 0000000..ad8e569
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_ilt.c
@@ -0,0 +1,337 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx.h"
+#include "bcm43xx_ilt.h"
+#include "bcm43xx_phy.h"
+
+
+/**** Initial Internal Lookup Tables ****/
+
+const u32 bcm43xx_ilt_rotor[BCM43xx_ILT_ROTOR_SIZE] = {
+ 0xFEB93FFD, 0xFEC63FFD, /* 0 */
+ 0xFED23FFD, 0xFEDF3FFD,
+ 0xFEEC3FFE, 0xFEF83FFE,
+ 0xFF053FFE, 0xFF113FFE,
+ 0xFF1E3FFE, 0xFF2A3FFF, /* 8 */
+ 0xFF373FFF, 0xFF443FFF,
+ 0xFF503FFF, 0xFF5D3FFF,
+ 0xFF693FFF, 0xFF763FFF,
+ 0xFF824000, 0xFF8F4000, /* 16 */
+ 0xFF9B4000, 0xFFA84000,
+ 0xFFB54000, 0xFFC14000,
+ 0xFFCE4000, 0xFFDA4000,
+ 0xFFE74000, 0xFFF34000, /* 24 */
+ 0x00004000, 0x000D4000,
+ 0x00194000, 0x00264000,
+ 0x00324000, 0x003F4000,
+ 0x004B4000, 0x00584000, /* 32 */
+ 0x00654000, 0x00714000,
+ 0x007E4000, 0x008A3FFF,
+ 0x00973FFF, 0x00A33FFF,
+ 0x00B03FFF, 0x00BC3FFF, /* 40 */
+ 0x00C93FFF, 0x00D63FFF,
+ 0x00E23FFE, 0x00EF3FFE,
+ 0x00FB3FFE, 0x01083FFE,
+ 0x01143FFE, 0x01213FFD, /* 48 */
+ 0x012E3FFD, 0x013A3FFD,
+ 0x01473FFD,
+};
+
+const u32 bcm43xx_ilt_retard[BCM43xx_ILT_RETARD_SIZE] = {
+ 0xDB93CB87, 0xD666CF64, /* 0 */
+ 0xD1FDD358, 0xCDA6D826,
+ 0xCA38DD9F, 0xC729E2B4,
+ 0xC469E88E, 0xC26AEE2B,
+ 0xC0DEF46C, 0xC073FA62, /* 8 */
+ 0xC01D00D5, 0xC0760743,
+ 0xC1560D1E, 0xC2E51369,
+ 0xC4ED18FF, 0xC7AC1ED7,
+ 0xCB2823B2, 0xCEFA28D9, /* 16 */
+ 0xD2F62D3F, 0xD7BB3197,
+ 0xDCE53568, 0xE1FE3875,
+ 0xE7D13B35, 0xED663D35,
+ 0xF39B3EC4, 0xF98E3FA7, /* 24 */
+ 0x00004000, 0x06723FA7,
+ 0x0C653EC4, 0x129A3D35,
+ 0x182F3B35, 0x1E023875,
+ 0x231B3568, 0x28453197, /* 32 */
+ 0x2D0A2D3F, 0x310628D9,
+ 0x34D823B2, 0x38541ED7,
+ 0x3B1318FF, 0x3D1B1369,
+ 0x3EAA0D1E, 0x3F8A0743, /* 40 */
+ 0x3FE300D5, 0x3F8DFA62,
+ 0x3F22F46C, 0x3D96EE2B,
+ 0x3B97E88E, 0x38D7E2B4,
+ 0x35C8DD9F, 0x325AD826, /* 48 */
+ 0x2E03D358, 0x299ACF64,
+ 0x246DCB87,
+};
+
+const u16 bcm43xx_ilt_finefreqa[BCM43xx_ILT_FINEFREQA_SIZE] = {
+ 0x0082, 0x0082, 0x0102, 0x0182, /* 0 */
+ 0x0202, 0x0282, 0x0302, 0x0382,
+ 0x0402, 0x0482, 0x0502, 0x0582,
+ 0x05E2, 0x0662, 0x06E2, 0x0762,
+ 0x07E2, 0x0842, 0x08C2, 0x0942, /* 16 */
+ 0x09C2, 0x0A22, 0x0AA2, 0x0B02,
+ 0x0B82, 0x0BE2, 0x0C62, 0x0CC2,
+ 0x0D42, 0x0DA2, 0x0E02, 0x0E62,
+ 0x0EE2, 0x0F42, 0x0FA2, 0x1002, /* 32 */
+ 0x1062, 0x10C2, 0x1122, 0x1182,
+ 0x11E2, 0x1242, 0x12A2, 0x12E2,
+ 0x1342, 0x13A2, 0x1402, 0x1442,
+ 0x14A2, 0x14E2, 0x1542, 0x1582, /* 48 */
+ 0x15E2, 0x1622, 0x1662, 0x16C1,
+ 0x1701, 0x1741, 0x1781, 0x17E1,
+ 0x1821, 0x1861, 0x18A1, 0x18E1,
+ 0x1921, 0x1961, 0x19A1, 0x19E1, /* 64 */
+ 0x1A21, 0x1A61, 0x1AA1, 0x1AC1,
+ 0x1B01, 0x1B41, 0x1B81, 0x1BA1,
+ 0x1BE1, 0x1C21, 0x1C41, 0x1C81,
+ 0x1CA1, 0x1CE1, 0x1D01, 0x1D41, /* 80 */
+ 0x1D61, 0x1DA1, 0x1DC1, 0x1E01,
+ 0x1E21, 0x1E61, 0x1E81, 0x1EA1,
+ 0x1EE1, 0x1F01, 0x1F21, 0x1F41,
+ 0x1F81, 0x1FA1, 0x1FC1, 0x1FE1, /* 96 */
+ 0x2001, 0x2041, 0x2061, 0x2081,
+ 0x20A1, 0x20C1, 0x20E1, 0x2101,
+ 0x2121, 0x2141, 0x2161, 0x2181,
+ 0x21A1, 0x21C1, 0x21E1, 0x2201, /* 112 */
+ 0x2221, 0x2241, 0x2261, 0x2281,
+ 0x22A1, 0x22C1, 0x22C1, 0x22E1,
+ 0x2301, 0x2321, 0x2341, 0x2361,
+ 0x2361, 0x2381, 0x23A1, 0x23C1, /* 128 */
+ 0x23E1, 0x23E1, 0x2401, 0x2421,
+ 0x2441, 0x2441, 0x2461, 0x2481,
+ 0x2481, 0x24A1, 0x24C1, 0x24C1,
+ 0x24E1, 0x2501, 0x2501, 0x2521, /* 144 */
+ 0x2541, 0x2541, 0x2561, 0x2561,
+ 0x2581, 0x25A1, 0x25A1, 0x25C1,
+ 0x25C1, 0x25E1, 0x2601, 0x2601,
+ 0x2621, 0x2621, 0x2641, 0x2641, /* 160 */
+ 0x2661, 0x2661, 0x2681, 0x2681,
+ 0x26A1, 0x26A1, 0x26C1, 0x26C1,
+ 0x26E1, 0x26E1, 0x2701, 0x2701,
+ 0x2721, 0x2721, 0x2740, 0x2740, /* 176 */
+ 0x2760, 0x2760, 0x2780, 0x2780,
+ 0x2780, 0x27A0, 0x27A0, 0x27C0,
+ 0x27C0, 0x27E0, 0x27E0, 0x27E0,
+ 0x2800, 0x2800, 0x2820, 0x2820, /* 192 */
+ 0x2820, 0x2840, 0x2840, 0x2840,
+ 0x2860, 0x2860, 0x2880, 0x2880,
+ 0x2880, 0x28A0, 0x28A0, 0x28A0,
+ 0x28C0, 0x28C0, 0x28C0, 0x28E0, /* 208 */
+ 0x28E0, 0x28E0, 0x2900, 0x2900,
+ 0x2900, 0x2920, 0x2920, 0x2920,
+ 0x2940, 0x2940, 0x2940, 0x2960,
+ 0x2960, 0x2960, 0x2960, 0x2980, /* 224 */
+ 0x2980, 0x2980, 0x29A0, 0x29A0,
+ 0x29A0, 0x29A0, 0x29C0, 0x29C0,
+ 0x29C0, 0x29E0, 0x29E0, 0x29E0,
+ 0x29E0, 0x2A00, 0x2A00, 0x2A00, /* 240 */
+ 0x2A00, 0x2A20, 0x2A20, 0x2A20,
+ 0x2A20, 0x2A40, 0x2A40, 0x2A40,
+ 0x2A40, 0x2A60, 0x2A60, 0x2A60,
+};
+
+const u16 bcm43xx_ilt_finefreqg[BCM43xx_ILT_FINEFREQG_SIZE] = {
+ 0x0089, 0x02E9, 0x0409, 0x04E9, /* 0 */
+ 0x05A9, 0x0669, 0x0709, 0x0789,
+ 0x0829, 0x08A9, 0x0929, 0x0989,
+ 0x0A09, 0x0A69, 0x0AC9, 0x0B29,
+ 0x0BA9, 0x0BE9, 0x0C49, 0x0CA9, /* 16 */
+ 0x0D09, 0x0D69, 0x0DA9, 0x0E09,
+ 0x0E69, 0x0EA9, 0x0F09, 0x0F49,
+ 0x0FA9, 0x0FE9, 0x1029, 0x1089,
+ 0x10C9, 0x1109, 0x1169, 0x11A9, /* 32 */
+ 0x11E9, 0x1229, 0x1289, 0x12C9,
+ 0x1309, 0x1349, 0x1389, 0x13C9,
+ 0x1409, 0x1449, 0x14A9, 0x14E9,
+ 0x1529, 0x1569, 0x15A9, 0x15E9, /* 48 */
+ 0x1629, 0x1669, 0x16A9, 0x16E8,
+ 0x1728, 0x1768, 0x17A8, 0x17E8,
+ 0x1828, 0x1868, 0x18A8, 0x18E8,
+ 0x1928, 0x1968, 0x19A8, 0x19E8, /* 64 */
+ 0x1A28, 0x1A68, 0x1AA8, 0x1AE8,
+ 0x1B28, 0x1B68, 0x1BA8, 0x1BE8,
+ 0x1C28, 0x1C68, 0x1CA8, 0x1CE8,
+ 0x1D28, 0x1D68, 0x1DC8, 0x1E08, /* 80 */
+ 0x1E48, 0x1E88, 0x1EC8, 0x1F08,
+ 0x1F48, 0x1F88, 0x1FE8, 0x2028,
+ 0x2068, 0x20A8, 0x2108, 0x2148,
+ 0x2188, 0x21C8, 0x2228, 0x2268, /* 96 */
+ 0x22C8, 0x2308, 0x2348, 0x23A8,
+ 0x23E8, 0x2448, 0x24A8, 0x24E8,
+ 0x2548, 0x25A8, 0x2608, 0x2668,
+ 0x26C8, 0x2728, 0x2787, 0x27E7, /* 112 */
+ 0x2847, 0x28C7, 0x2947, 0x29A7,
+ 0x2A27, 0x2AC7, 0x2B47, 0x2BE7,
+ 0x2CA7, 0x2D67, 0x2E47, 0x2F67,
+ 0x3247, 0x3526, 0x3646, 0x3726, /* 128 */
+ 0x3806, 0x38A6, 0x3946, 0x39E6,
+ 0x3A66, 0x3AE6, 0x3B66, 0x3BC6,
+ 0x3C45, 0x3CA5, 0x3D05, 0x3D85,
+ 0x3DE5, 0x3E45, 0x3EA5, 0x3EE5, /* 144 */
+ 0x3F45, 0x3FA5, 0x4005, 0x4045,
+ 0x40A5, 0x40E5, 0x4145, 0x4185,
+ 0x41E5, 0x4225, 0x4265, 0x42C5,
+ 0x4305, 0x4345, 0x43A5, 0x43E5, /* 160 */
+ 0x4424, 0x4464, 0x44C4, 0x4504,
+ 0x4544, 0x4584, 0x45C4, 0x4604,
+ 0x4644, 0x46A4, 0x46E4, 0x4724,
+ 0x4764, 0x47A4, 0x47E4, 0x4824, /* 176 */
+ 0x4864, 0x48A4, 0x48E4, 0x4924,
+ 0x4964, 0x49A4, 0x49E4, 0x4A24,
+ 0x4A64, 0x4AA4, 0x4AE4, 0x4B23,
+ 0x4B63, 0x4BA3, 0x4BE3, 0x4C23, /* 192 */
+ 0x4C63, 0x4CA3, 0x4CE3, 0x4D23,
+ 0x4D63, 0x4DA3, 0x4DE3, 0x4E23,
+ 0x4E63, 0x4EA3, 0x4EE3, 0x4F23,
+ 0x4F63, 0x4FC3, 0x5003, 0x5043, /* 208 */
+ 0x5083, 0x50C3, 0x5103, 0x5143,
+ 0x5183, 0x51E2, 0x5222, 0x5262,
+ 0x52A2, 0x52E2, 0x5342, 0x5382,
+ 0x53C2, 0x5402, 0x5462, 0x54A2, /* 224 */
+ 0x5502, 0x5542, 0x55A2, 0x55E2,
+ 0x5642, 0x5682, 0x56E2, 0x5722,
+ 0x5782, 0x57E1, 0x5841, 0x58A1,
+ 0x5901, 0x5961, 0x59C1, 0x5A21, /* 240 */
+ 0x5AA1, 0x5B01, 0x5B81, 0x5BE1,
+ 0x5C61, 0x5D01, 0x5D80, 0x5E20,
+ 0x5EE0, 0x5FA0, 0x6080, 0x61C0,
+};
+
+const u16 bcm43xx_ilt_noisea2[BCM43xx_ILT_NOISEA2_SIZE] = {
+ 0x0001, 0x0001, 0x0001, 0xFFFE,
+ 0xFFFE, 0x3FFF, 0x1000, 0x0393,
+};
+
+const u16 bcm43xx_ilt_noisea3[BCM43xx_ILT_NOISEA3_SIZE] = {
+ 0x4C4C, 0x4C4C, 0x4C4C, 0x2D36,
+ 0x4C4C, 0x4C4C, 0x4C4C, 0x2D36,
+};
+
+const u16 bcm43xx_ilt_noiseg1[BCM43xx_ILT_NOISEG1_SIZE] = {
+ 0x013C, 0x01F5, 0x031A, 0x0631,
+ 0x0001, 0x0001, 0x0001, 0x0001,
+};
+
+const u16 bcm43xx_ilt_noiseg2[BCM43xx_ILT_NOISEG2_SIZE] = {
+ 0x5484, 0x3C40, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+const u16 bcm43xx_ilt_noisescaleg1[BCM43xx_ILT_NOISESCALEG_SIZE] = {
+ 0x6C77, 0x5162, 0x3B40, 0x3335, /* 0 */
+ 0x2F2D, 0x2A2A, 0x2527, 0x1F21,
+ 0x1A1D, 0x1719, 0x1616, 0x1414,
+ 0x1414, 0x1400, 0x1414, 0x1614,
+ 0x1716, 0x1A19, 0x1F1D, 0x2521, /* 16 */
+ 0x2A27, 0x2F2A, 0x332D, 0x3B35,
+ 0x5140, 0x6C62, 0x0077,
+};
+
+const u16 bcm43xx_ilt_noisescaleg2[BCM43xx_ILT_NOISESCALEG_SIZE] = {
+ 0xD8DD, 0xCBD4, 0xBCC0, 0XB6B7, /* 0 */
+ 0xB2B0, 0xADAD, 0xA7A9, 0x9FA1,
+ 0x969B, 0x9195, 0x8F8F, 0x8A8A,
+ 0x8A8A, 0x8A00, 0x8A8A, 0x8F8A,
+ 0x918F, 0x9695, 0x9F9B, 0xA7A1, /* 16 */
+ 0xADA9, 0xB2AD, 0xB6B0, 0xBCB7,
+ 0xCBC0, 0xD8D4, 0x00DD,
+};
+
+const u16 bcm43xx_ilt_noisescaleg3[BCM43xx_ILT_NOISESCALEG_SIZE] = {
+ 0xA4A4, 0xA4A4, 0xA4A4, 0xA4A4, /* 0 */
+ 0xA4A4, 0xA4A4, 0xA4A4, 0xA4A4,
+ 0xA4A4, 0xA4A4, 0xA4A4, 0xA4A4,
+ 0xA4A4, 0xA400, 0xA4A4, 0xA4A4,
+ 0xA4A4, 0xA4A4, 0xA4A4, 0xA4A4, /* 16 */
+ 0xA4A4, 0xA4A4, 0xA4A4, 0xA4A4,
+ 0xA4A4, 0xA4A4, 0x00A4,
+};
+
+const u16 bcm43xx_ilt_sigmasqr1[BCM43xx_ILT_SIGMASQR_SIZE] = {
+ 0x007A, 0x0075, 0x0071, 0x006C, /* 0 */
+ 0x0067, 0x0063, 0x005E, 0x0059,
+ 0x0054, 0x0050, 0x004B, 0x0046,
+ 0x0042, 0x003D, 0x003D, 0x003D,
+ 0x003D, 0x003D, 0x003D, 0x003D, /* 16 */
+ 0x003D, 0x003D, 0x003D, 0x003D,
+ 0x003D, 0x003D, 0x0000, 0x003D,
+ 0x003D, 0x003D, 0x003D, 0x003D,
+ 0x003D, 0x003D, 0x003D, 0x003D, /* 32 */
+ 0x003D, 0x003D, 0x003D, 0x003D,
+ 0x0042, 0x0046, 0x004B, 0x0050,
+ 0x0054, 0x0059, 0x005E, 0x0063,
+ 0x0067, 0x006C, 0x0071, 0x0075, /* 48 */
+ 0x007A,
+};
+
+const u16 bcm43xx_ilt_sigmasqr2[BCM43xx_ILT_SIGMASQR_SIZE] = {
+ 0x00DE, 0x00DC, 0x00DA, 0x00D8, /* 0 */
+ 0x00D6, 0x00D4, 0x00D2, 0x00CF,
+ 0x00CD, 0x00CA, 0x00C7, 0x00C4,
+ 0x00C1, 0x00BE, 0x00BE, 0x00BE,
+ 0x00BE, 0x00BE, 0x00BE, 0x00BE, /* 16 */
+ 0x00BE, 0x00BE, 0x00BE, 0x00BE,
+ 0x00BE, 0x00BE, 0x0000, 0x00BE,
+ 0x00BE, 0x00BE, 0x00BE, 0x00BE,
+ 0x00BE, 0x00BE, 0x00BE, 0x00BE, /* 32 */
+ 0x00BE, 0x00BE, 0x00BE, 0x00BE,
+ 0x00C1, 0x00C4, 0x00C7, 0x00CA,
+ 0x00CD, 0x00CF, 0x00D2, 0x00D4,
+ 0x00D6, 0x00D8, 0x00DA, 0x00DC, /* 48 */
+ 0x00DE,
+};
+
+/**** Helper functions to access the device Internal Lookup Tables ****/
+
+void bcm43xx_ilt_write(struct bcm43xx_private *bcm, u16 offset, u16 val)
+{
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A) {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_CTRL, offset);
+ mmiowb();
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, val);
+ } else {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_G_CTRL, offset);
+ mmiowb();
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_G_DATA1, val);
+ }
+}
+
+u16 bcm43xx_ilt_read(struct bcm43xx_private *bcm, u16 offset)
+{
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A) {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_CTRL, offset);
+ return bcm43xx_phy_read(bcm, BCM43xx_PHY_ILT_A_DATA1);
+ } else {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_G_CTRL, offset);
+ return bcm43xx_phy_read(bcm, BCM43xx_PHY_ILT_G_DATA1);
+ }
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_ilt.h b/drivers/net/wireless/bcm43xx/bcm43xx_ilt.h
new file mode 100644
index 0000000..464521a
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_ilt.h
@@ -0,0 +1,32 @@
+#ifndef BCM43xx_ILT_H_
+#define BCM43xx_ILT_H_
+
+#define BCM43xx_ILT_ROTOR_SIZE 53
+extern const u32 bcm43xx_ilt_rotor[BCM43xx_ILT_ROTOR_SIZE];
+#define BCM43xx_ILT_RETARD_SIZE 53
+extern const u32 bcm43xx_ilt_retard[BCM43xx_ILT_RETARD_SIZE];
+#define BCM43xx_ILT_FINEFREQA_SIZE 256
+extern const u16 bcm43xx_ilt_finefreqa[BCM43xx_ILT_FINEFREQA_SIZE];
+#define BCM43xx_ILT_FINEFREQG_SIZE 256
+extern const u16 bcm43xx_ilt_finefreqg[BCM43xx_ILT_FINEFREQG_SIZE];
+#define BCM43xx_ILT_NOISEA2_SIZE 8
+extern const u16 bcm43xx_ilt_noisea2[BCM43xx_ILT_NOISEA2_SIZE];
+#define BCM43xx_ILT_NOISEA3_SIZE 8
+extern const u16 bcm43xx_ilt_noisea3[BCM43xx_ILT_NOISEA3_SIZE];
+#define BCM43xx_ILT_NOISEG1_SIZE 8
+extern const u16 bcm43xx_ilt_noiseg1[BCM43xx_ILT_NOISEG1_SIZE];
+#define BCM43xx_ILT_NOISEG2_SIZE 8
+extern const u16 bcm43xx_ilt_noiseg2[BCM43xx_ILT_NOISEG2_SIZE];
+#define BCM43xx_ILT_NOISESCALEG_SIZE 27
+extern const u16 bcm43xx_ilt_noisescaleg1[BCM43xx_ILT_NOISESCALEG_SIZE];
+extern const u16 bcm43xx_ilt_noisescaleg2[BCM43xx_ILT_NOISESCALEG_SIZE];
+extern const u16 bcm43xx_ilt_noisescaleg3[BCM43xx_ILT_NOISESCALEG_SIZE];
+#define BCM43xx_ILT_SIGMASQR_SIZE 53
+extern const u16 bcm43xx_ilt_sigmasqr1[BCM43xx_ILT_SIGMASQR_SIZE];
+extern const u16 bcm43xx_ilt_sigmasqr2[BCM43xx_ILT_SIGMASQR_SIZE];
+
+
+void bcm43xx_ilt_write(struct bcm43xx_private *bcm, u16 offset, u16 val);
+u16 bcm43xx_ilt_read(struct bcm43xx_private *bcm, u16 offset);
+
+#endif /* BCM43xx_ILT_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
new file mode 100644
index 0000000..4b2c02c
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -0,0 +1,293 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx_leds.h"
+#include "bcm43xx.h"
+
+#include <asm/bitops.h>
+
+
+static void bcm43xx_led_changestate(struct bcm43xx_led *led)
+{
+ struct bcm43xx_private *bcm = led->bcm;
+ const int index = bcm43xx_led_index(led);
+ const u16 mask = (1 << index);
+ u16 ledctl;
+
+ assert(index >= 0 && index < BCM43xx_NR_LEDS);
+ assert(led->blink_interval);
+ ledctl = bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_CONTROL);
+ ledctl = (ledctl & mask) ? (ledctl & ~mask) : (ledctl | mask);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_CONTROL, ledctl);
+}
+
+static void bcm43xx_led_blink(unsigned long d)
+{
+ struct bcm43xx_led *led = (struct bcm43xx_led *)d;
+ struct bcm43xx_private *bcm = led->bcm;
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (led->blink_interval) {
+ bcm43xx_led_changestate(led);
+ mod_timer(&led->blink_timer, jiffies + led->blink_interval);
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+static void bcm43xx_led_blink_start(struct bcm43xx_led *led,
+ unsigned long interval)
+{
+ if (led->blink_interval)
+ return;
+ led->blink_interval = interval;
+ bcm43xx_led_changestate(led);
+ led->blink_timer.expires = jiffies + interval;
+ add_timer(&led->blink_timer);
+}
+
+static void bcm43xx_led_blink_stop(struct bcm43xx_led *led, int sync)
+{
+ struct bcm43xx_private *bcm = led->bcm;
+ const int index = bcm43xx_led_index(led);
+ u16 ledctl;
+
+ if (!led->blink_interval)
+ return;
+ if (unlikely(sync))
+ del_timer_sync(&led->blink_timer);
+ else
+ del_timer(&led->blink_timer);
+ led->blink_interval = 0;
+
+ /* Make sure the LED is turned off. */
+ assert(index >= 0 && index < BCM43xx_NR_LEDS);
+ ledctl = bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_CONTROL);
+ if (led->activelow)
+ ledctl |= (1 << index);
+ else
+ ledctl &= ~(1 << index);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_CONTROL, ledctl);
+}
+
+static void bcm43xx_led_init_hardcoded(struct bcm43xx_private *bcm,
+ struct bcm43xx_led *led,
+ int led_index)
+{
+ /* This function is called, if the behaviour (and activelow)
+ * information for a LED is missing in the SPROM.
+ * We hardcode the behaviour values for various devices here.
+ * Note that the BCM43xx_LED_TEST_XXX behaviour values can
+ * be used to figure out which led is mapped to which index.
+ */
+
+ switch (led_index) {
+ case 0:
+ led->behaviour = BCM43xx_LED_ACTIVITY;
+ if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ)
+ led->behaviour = BCM43xx_LED_RADIO_ALL;
+ break;
+ case 1:
+ led->behaviour = BCM43xx_LED_RADIO_B;
+ if (bcm->board_vendor == PCI_VENDOR_ID_ASUSTEK)
+ led->behaviour = BCM43xx_LED_ASSOC;
+ break;
+ case 2:
+ led->behaviour = BCM43xx_LED_RADIO_A;
+ break;
+ case 3:
+ led->behaviour = BCM43xx_LED_OFF;
+ break;
+ default:
+ assert(0);
+ }
+}
+
+int bcm43xx_leds_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_led *led;
+ u8 sprom[4];
+ int i;
+
+ sprom[0] = bcm->sprom.wl0gpio0;
+ sprom[1] = bcm->sprom.wl0gpio1;
+ sprom[2] = bcm->sprom.wl0gpio2;
+ sprom[3] = bcm->sprom.wl0gpio3;
+
+ for (i = 0; i < BCM43xx_NR_LEDS; i++) {
+ led = &(bcm->leds[i]);
+ led->bcm = bcm;
+ setup_timer(&led->blink_timer,
+ bcm43xx_led_blink,
+ (unsigned long)led);
+
+ if (sprom[i] == 0xFF) {
+ bcm43xx_led_init_hardcoded(bcm, led, i);
+ } else {
+ led->behaviour = sprom[i] & BCM43xx_LED_BEHAVIOUR;
+ led->activelow = !!(sprom[i] & BCM43xx_LED_ACTIVELOW);
+ }
+ }
+
+ return 0;
+}
+
+void bcm43xx_leds_exit(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_led *led;
+ int i;
+
+ for (i = 0; i < BCM43xx_NR_LEDS; i++) {
+ led = &(bcm->leds[i]);
+ bcm43xx_led_blink_stop(led, 1);
+ }
+ bcm43xx_leds_switch_all(bcm, 0);
+}
+
+void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity)
+{
+ struct bcm43xx_led *led;
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ const int transferring = (jiffies - bcm->stats.last_tx) < BCM43xx_LED_XFER_THRES;
+ int i, turn_on;
+ unsigned long interval = 0;
+ u16 ledctl;
+
+ ledctl = bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_CONTROL);
+ for (i = 0; i < BCM43xx_NR_LEDS; i++) {
+ led = &(bcm->leds[i]);
+
+ turn_on = 0;
+ switch (led->behaviour) {
+ case BCM43xx_LED_INACTIVE:
+ continue;
+ case BCM43xx_LED_OFF:
+ break;
+ case BCM43xx_LED_ON:
+ turn_on = 1;
+ break;
+ case BCM43xx_LED_ACTIVITY:
+ turn_on = activity;
+ break;
+ case BCM43xx_LED_RADIO_ALL:
+ turn_on = radio->enabled;
+ break;
+ case BCM43xx_LED_RADIO_A:
+ turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
+ break;
+ case BCM43xx_LED_RADIO_B:
+ turn_on = (radio->enabled &&
+ (phy->type == BCM43xx_PHYTYPE_B ||
+ phy->type == BCM43xx_PHYTYPE_G));
+ break;
+ case BCM43xx_LED_MODE_BG:
+ if (phy->type == BCM43xx_PHYTYPE_G &&
+ 1/*FIXME: using G rates.*/)
+ turn_on = 1;
+ break;
+ case BCM43xx_LED_TRANSFER:
+ if (transferring)
+ bcm43xx_led_blink_start(led, BCM43xx_LEDBLINK_MEDIUM);
+ else
+ bcm43xx_led_blink_stop(led, 0);
+ continue;
+ case BCM43xx_LED_APTRANSFER:
+ if (bcm->ieee->iw_mode == IW_MODE_MASTER) {
+ if (transferring) {
+ interval = BCM43xx_LEDBLINK_FAST;
+ turn_on = 1;
+ }
+ } else {
+ turn_on = 1;
+ if (0/*TODO: not assoc*/)
+ interval = BCM43xx_LEDBLINK_SLOW;
+ else if (transferring)
+ interval = BCM43xx_LEDBLINK_FAST;
+ else
+ turn_on = 0;
+ }
+ if (turn_on)
+ bcm43xx_led_blink_start(led, interval);
+ else
+ bcm43xx_led_blink_stop(led, 0);
+ continue;
+ case BCM43xx_LED_WEIRD:
+ //TODO
+ break;
+ case BCM43xx_LED_ASSOC:
+ if (bcm->softmac->associated)
+ turn_on = 1;
+ break;
+#ifdef CONFIG_BCM43XX_DEBUG
+ case BCM43xx_LED_TEST_BLINKSLOW:
+ bcm43xx_led_blink_start(led, BCM43xx_LEDBLINK_SLOW);
+ continue;
+ case BCM43xx_LED_TEST_BLINKMEDIUM:
+ bcm43xx_led_blink_start(led, BCM43xx_LEDBLINK_MEDIUM);
+ continue;
+ case BCM43xx_LED_TEST_BLINKFAST:
+ bcm43xx_led_blink_start(led, BCM43xx_LEDBLINK_FAST);
+ continue;
+#endif /* CONFIG_BCM43XX_DEBUG */
+ default:
+ assert(0);
+ };
+
+ if (led->activelow)
+ turn_on = !turn_on;
+ if (turn_on)
+ ledctl |= (1 << i);
+ else
+ ledctl &= ~(1 << i);
+ }
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_CONTROL, ledctl);
+}
+
+void bcm43xx_leds_switch_all(struct bcm43xx_private *bcm, int on)
+{
+ struct bcm43xx_led *led;
+ u16 ledctl;
+ int i;
+ int bit_on;
+
+ ledctl = bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_CONTROL);
+ for (i = 0; i < BCM43xx_NR_LEDS; i++) {
+ led = &(bcm->leds[i]);
+ if (led->behaviour == BCM43xx_LED_INACTIVE)
+ continue;
+ if (on)
+ bit_on = led->activelow ? 0 : 1;
+ else
+ bit_on = led->activelow ? 1 : 0;
+ if (bit_on)
+ ledctl |= (1 << i);
+ else
+ ledctl &= ~(1 << i);
+ }
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_CONTROL, ledctl);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
new file mode 100644
index 0000000..d3716cf
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h
@@ -0,0 +1,56 @@
+#ifndef BCM43xx_LEDS_H_
+#define BCM43xx_LEDS_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+
+
+struct bcm43xx_led {
+ u8 behaviour:7;
+ u8 activelow:1;
+
+ struct bcm43xx_private *bcm;
+ struct timer_list blink_timer;
+ unsigned long blink_interval;
+};
+#define bcm43xx_led_index(led) ((int)((led) - (led)->bcm->leds))
+
+/* Delay between state changes when blinking in jiffies */
+#define BCM43xx_LEDBLINK_SLOW (HZ / 1)
+#define BCM43xx_LEDBLINK_MEDIUM (HZ / 4)
+#define BCM43xx_LEDBLINK_FAST (HZ / 8)
+
+#define BCM43xx_LED_XFER_THRES (HZ / 100)
+
+#define BCM43xx_LED_BEHAVIOUR 0x7F
+#define BCM43xx_LED_ACTIVELOW 0x80
+enum { /* LED behaviour values */
+ BCM43xx_LED_OFF,
+ BCM43xx_LED_ON,
+ BCM43xx_LED_ACTIVITY,
+ BCM43xx_LED_RADIO_ALL,
+ BCM43xx_LED_RADIO_A,
+ BCM43xx_LED_RADIO_B,
+ BCM43xx_LED_MODE_BG,
+ BCM43xx_LED_TRANSFER,
+ BCM43xx_LED_APTRANSFER,
+ BCM43xx_LED_WEIRD,//FIXME
+ BCM43xx_LED_ASSOC,
+ BCM43xx_LED_INACTIVE,
+
+ /* Behaviour values for testing.
+ * With these values it is easier to figure out
+ * the real behaviour of leds, in case the SPROM
+ * is missing information.
+ */
+ BCM43xx_LED_TEST_BLINKSLOW,
+ BCM43xx_LED_TEST_BLINKMEDIUM,
+ BCM43xx_LED_TEST_BLINKFAST,
+};
+
+int bcm43xx_leds_init(struct bcm43xx_private *bcm);
+void bcm43xx_leds_exit(struct bcm43xx_private *bcm);
+void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity);
+void bcm43xx_leds_switch_all(struct bcm43xx_private *bcm, int on);
+
+#endif /* BCM43xx_LEDS_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
new file mode 100644
index 0000000..c37371f
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -0,0 +1,3973 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/version.h>
+#include <linux/firmware.h>
+#include <linux/wireless.h>
+#include <linux/workqueue.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <net/iw_handler.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_debugfs.h"
+#include "bcm43xx_radio.h"
+#include "bcm43xx_phy.h"
+#include "bcm43xx_dma.h"
+#include "bcm43xx_pio.h"
+#include "bcm43xx_power.h"
+#include "bcm43xx_wx.h"
+#include "bcm43xx_ethtool.h"
+#include "bcm43xx_xmit.h"
+
+
+MODULE_DESCRIPTION("Broadcom BCM43xx wireless driver");
+MODULE_AUTHOR("Martin Langer");
+MODULE_AUTHOR("Stefano Brivio");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_BCM947XX
+extern char *nvram_get(char *name);
+#endif
+
+#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
+static int modparam_pio;
+module_param_named(pio, modparam_pio, int, 0444);
+MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
+#elif defined(CONFIG_BCM43XX_DMA)
+# define modparam_pio 0
+#elif defined(CONFIG_BCM43XX_PIO)
+# define modparam_pio 1
+#endif
+
+static int modparam_bad_frames_preempt;
+module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
+MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames Preemption");
+
+static int modparam_short_retry = BCM43xx_DEFAULT_SHORT_RETRY_LIMIT;
+module_param_named(short_retry, modparam_short_retry, int, 0444);
+MODULE_PARM_DESC(short_retry, "Short-Retry-Limit (0 - 15)");
+
+static int modparam_long_retry = BCM43xx_DEFAULT_LONG_RETRY_LIMIT;
+module_param_named(long_retry, modparam_long_retry, int, 0444);
+MODULE_PARM_DESC(long_retry, "Long-Retry-Limit (0 - 15)");
+
+static int modparam_locale = -1;
+module_param_named(locale, modparam_locale, int, 0444);
+MODULE_PARM_DESC(country, "Select LocaleCode 0-11 (For travelers)");
+
+static int modparam_noleds;
+module_param_named(noleds, modparam_noleds, int, 0444);
+MODULE_PARM_DESC(noleds, "Turn off all LED activity");
+
+#ifdef CONFIG_BCM43XX_DEBUG
+static char modparam_fwpostfix[64];
+module_param_string(fwpostfix, modparam_fwpostfix, 64, 0444);
+MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging.");
+#else
+# define modparam_fwpostfix ""
+#endif /* CONFIG_BCM43XX_DEBUG*/
+
+
+/* If you want to debug with just a single device, enable this,
+ * where the string is the pci device ID (as given by the kernel's
+ * pci_name function) of the device to be used.
+ */
+//#define DEBUG_SINGLE_DEVICE_ONLY "0001:11:00.0"
+
+/* If you want to enable printing of each MMIO access, enable this. */
+//#define DEBUG_ENABLE_MMIO_PRINT
+
+/* If you want to enable printing of MMIO access within
+ * ucode/pcm upload, initvals write, enable this.
+ */
+//#define DEBUG_ENABLE_UCODE_MMIO_PRINT
+
+/* If you want to enable printing of PCI Config Space access, enable this */
+//#define DEBUG_ENABLE_PCILOG
+
+
+/* Detailed list maintained at:
+ * http://openfacts.berlios.de/index-en.phtml?title=Bcm43xxDevices
+ */
+ static struct pci_device_id bcm43xx_pci_tbl[] = {
+ /* Broadcom 4303 802.11b */
+ { PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4307 802.11b */
+ { PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4318 802.11b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4306 802.11b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4306 802.11a */
+// { PCI_VENDOR_ID_BROADCOM, 0x4321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4309 802.11a/b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4324, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 43XG 802.11b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#ifdef CONFIG_BCM947XX
+ /* SB bus on BCM947xx */
+ { PCI_VENDOR_ID_BROADCOM, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#endif
+ { 0 },
+};
+MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl);
+
+static void bcm43xx_ram_write(struct bcm43xx_private *bcm, u16 offset, u32 val)
+{
+ u32 status;
+
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ if (!(status & BCM43xx_SBF_XFER_REG_BYTESWAP))
+ val = swab32(val);
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_RAM_CONTROL, offset);
+ mmiowb();
+ bcm43xx_write32(bcm, BCM43xx_MMIO_RAM_DATA, val);
+}
+
+static inline
+void bcm43xx_shm_control_word(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset)
+{
+ u32 control;
+
+ /* "offset" is the WORD offset. */
+
+ control = routing;
+ control <<= 16;
+ control |= offset;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_CONTROL, control);
+}
+
+u32 bcm43xx_shm_read32(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset)
+{
+ u32 ret;
+
+ if (routing == BCM43xx_SHM_SHARED) {
+ if (offset & 0x0003) {
+ /* Unaligned access */
+ bcm43xx_shm_control_word(bcm, routing, offset >> 2);
+ ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED);
+ ret <<= 16;
+ bcm43xx_shm_control_word(bcm, routing, (offset >> 2) + 1);
+ ret |= bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA);
+
+ return ret;
+ }
+ offset >>= 2;
+ }
+ bcm43xx_shm_control_word(bcm, routing, offset);
+ ret = bcm43xx_read32(bcm, BCM43xx_MMIO_SHM_DATA);
+
+ return ret;
+}
+
+u16 bcm43xx_shm_read16(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset)
+{
+ u16 ret;
+
+ if (routing == BCM43xx_SHM_SHARED) {
+ if (offset & 0x0003) {
+ /* Unaligned access */
+ bcm43xx_shm_control_word(bcm, routing, offset >> 2);
+ ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED);
+
+ return ret;
+ }
+ offset >>= 2;
+ }
+ bcm43xx_shm_control_word(bcm, routing, offset);
+ ret = bcm43xx_read16(bcm, BCM43xx_MMIO_SHM_DATA);
+
+ return ret;
+}
+
+void bcm43xx_shm_write32(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset,
+ u32 value)
+{
+ if (routing == BCM43xx_SHM_SHARED) {
+ if (offset & 0x0003) {
+ /* Unaligned access */
+ bcm43xx_shm_control_word(bcm, routing, offset >> 2);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED,
+ (value >> 16) & 0xffff);
+ mmiowb();
+ bcm43xx_shm_control_word(bcm, routing, (offset >> 2) + 1);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA,
+ value & 0xffff);
+ return;
+ }
+ offset >>= 2;
+ }
+ bcm43xx_shm_control_word(bcm, routing, offset);
+ mmiowb();
+ bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, value);
+}
+
+void bcm43xx_shm_write16(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset,
+ u16 value)
+{
+ if (routing == BCM43xx_SHM_SHARED) {
+ if (offset & 0x0003) {
+ /* Unaligned access */
+ bcm43xx_shm_control_word(bcm, routing, offset >> 2);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA_UNALIGNED,
+ value);
+ return;
+ }
+ offset >>= 2;
+ }
+ bcm43xx_shm_control_word(bcm, routing, offset);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_SHM_DATA, value);
+}
+
+void bcm43xx_tsf_read(struct bcm43xx_private *bcm, u64 *tsf)
+{
+ /* We need to be careful. As we read the TSF from multiple
+ * registers, we should take care of register overflows.
+ * In theory, the whole tsf read process should be atomic.
+ * We try to be atomic here, by restaring the read process,
+ * if any of the high registers changed (overflew).
+ */
+ if (bcm->current_core->rev >= 3) {
+ u32 low, high, high2;
+
+ do {
+ high = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH);
+ low = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW);
+ high2 = bcm43xx_read32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH);
+ } while (unlikely(high != high2));
+
+ *tsf = high;
+ *tsf <<= 32;
+ *tsf |= low;
+ } else {
+ u64 tmp;
+ u16 v0, v1, v2, v3;
+ u16 test1, test2, test3;
+
+ do {
+ v3 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_3);
+ v2 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_2);
+ v1 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_1);
+ v0 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_0);
+
+ test3 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_3);
+ test2 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_2);
+ test1 = bcm43xx_read16(bcm, BCM43xx_MMIO_TSF_1);
+ } while (v3 != test3 || v2 != test2 || v1 != test1);
+
+ *tsf = v3;
+ *tsf <<= 48;
+ tmp = v2;
+ tmp <<= 32;
+ *tsf |= tmp;
+ tmp = v1;
+ tmp <<= 16;
+ *tsf |= tmp;
+ *tsf |= v0;
+ }
+}
+
+void bcm43xx_tsf_write(struct bcm43xx_private *bcm, u64 tsf)
+{
+ u32 status;
+
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ status |= BCM43xx_SBF_TIME_UPDATE;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+ mmiowb();
+
+ /* Be careful with the in-progress timer.
+ * First zero out the low register, so we have a full
+ * register-overflow duration to complete the operation.
+ */
+ if (bcm->current_core->rev >= 3) {
+ u32 lo = (tsf & 0x00000000FFFFFFFFULL);
+ u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW, 0);
+ mmiowb();
+ bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_HIGH, hi);
+ mmiowb();
+ bcm43xx_write32(bcm, BCM43xx_MMIO_REV3PLUS_TSF_LOW, lo);
+ } else {
+ u16 v0 = (tsf & 0x000000000000FFFFULL);
+ u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
+ u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
+ u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_0, 0);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_3, v3);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_2, v2);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_1, v1);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_TSF_0, v0);
+ }
+
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ status &= ~BCM43xx_SBF_TIME_UPDATE;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+}
+
+static
+void bcm43xx_macfilter_set(struct bcm43xx_private *bcm,
+ u16 offset,
+ const u8 *mac)
+{
+ u16 data;
+
+ offset |= 0x0020;
+ bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_CONTROL, offset);
+
+ data = mac[0];
+ data |= mac[1] << 8;
+ bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data);
+ data = mac[2];
+ data |= mac[3] << 8;
+ bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data);
+ data = mac[4];
+ data |= mac[5] << 8;
+ bcm43xx_write16(bcm, BCM43xx_MMIO_MACFILTER_DATA, data);
+}
+
+static void bcm43xx_macfilter_clear(struct bcm43xx_private *bcm,
+ u16 offset)
+{
+ const u8 zero_addr[ETH_ALEN] = { 0 };
+
+ bcm43xx_macfilter_set(bcm, offset, zero_addr);
+}
+
+static void bcm43xx_write_mac_bssid_templates(struct bcm43xx_private *bcm)
+{
+ const u8 *mac = (const u8 *)(bcm->net_dev->dev_addr);
+ const u8 *bssid = (const u8 *)(bcm->ieee->bssid);
+ u8 mac_bssid[ETH_ALEN * 2];
+ int i;
+
+ memcpy(mac_bssid, mac, ETH_ALEN);
+ memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
+
+ /* Write our MAC address and BSSID to template ram */
+ for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32))
+ bcm43xx_ram_write(bcm, 0x20 + i, *((u32 *)(mac_bssid + i)));
+ for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32))
+ bcm43xx_ram_write(bcm, 0x78 + i, *((u32 *)(mac_bssid + i)));
+ for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32))
+ bcm43xx_ram_write(bcm, 0x478 + i, *((u32 *)(mac_bssid + i)));
+}
+
+//FIXME: Well, we should probably call them from somewhere.
+#if 0
+static void bcm43xx_set_slot_time(struct bcm43xx_private *bcm, u16 slot_time)
+{
+ /* slot_time is in usec. */
+ if (bcm43xx_current_phy(bcm)->type != BCM43xx_PHYTYPE_G)
+ return;
+ bcm43xx_write16(bcm, 0x684, 510 + slot_time);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0010, slot_time);
+}
+
+static void bcm43xx_short_slot_timing_enable(struct bcm43xx_private *bcm)
+{
+ bcm43xx_set_slot_time(bcm, 9);
+}
+
+static void bcm43xx_short_slot_timing_disable(struct bcm43xx_private *bcm)
+{
+ bcm43xx_set_slot_time(bcm, 20);
+}
+#endif
+
+/* FIXME: To get the MAC-filter working, we need to implement the
+ * following functions (and rename them :)
+ */
+#if 0
+static void bcm43xx_disassociate(struct bcm43xx_private *bcm)
+{
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC);
+
+ bcm43xx_ram_write(bcm, 0x0026, 0x0000);
+ bcm43xx_ram_write(bcm, 0x0028, 0x0000);
+ bcm43xx_ram_write(bcm, 0x007E, 0x0000);
+ bcm43xx_ram_write(bcm, 0x0080, 0x0000);
+ bcm43xx_ram_write(bcm, 0x047E, 0x0000);
+ bcm43xx_ram_write(bcm, 0x0480, 0x0000);
+
+ if (bcm->current_core->rev < 3) {
+ bcm43xx_write16(bcm, 0x0610, 0x8000);
+ bcm43xx_write16(bcm, 0x060E, 0x0000);
+ } else
+ bcm43xx_write32(bcm, 0x0188, 0x80000000);
+
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0004, 0x000003ff);
+
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_G &&
+ ieee80211_is_ofdm_rate(bcm->softmac->txrates.default_rate))
+ bcm43xx_short_slot_timing_enable(bcm);
+
+ bcm43xx_mac_enable(bcm);
+}
+
+static void bcm43xx_associate(struct bcm43xx_private *bcm,
+ const u8 *mac)
+{
+ memcpy(bcm->ieee->bssid, mac, ETH_ALEN);
+
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_ASSOC, mac);
+ bcm43xx_write_mac_bssid_templates(bcm);
+ bcm43xx_mac_enable(bcm);
+}
+#endif
+
+/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
+ * Returns the _previously_ enabled IRQ mask.
+ */
+static inline u32 bcm43xx_interrupt_enable(struct bcm43xx_private *bcm, u32 mask)
+{
+ u32 old_mask;
+
+ old_mask = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK, old_mask | mask);
+
+ return old_mask;
+}
+
+/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
+ * Returns the _previously_ enabled IRQ mask.
+ */
+static inline u32 bcm43xx_interrupt_disable(struct bcm43xx_private *bcm, u32 mask)
+{
+ u32 old_mask;
+
+ old_mask = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
+
+ return old_mask;
+}
+
+/* Make sure we don't receive more data from the device. */
+static int bcm43xx_disable_interrupts_sync(struct bcm43xx_private *bcm, u32 *oldstate)
+{
+ u32 old;
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (bcm43xx_is_initializing(bcm) || bcm->shutting_down) {
+ bcm43xx_unlock_mmio(bcm, flags);
+ return -EBUSY;
+ }
+ old = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ tasklet_disable(&bcm->isr_tasklet);
+ bcm43xx_unlock_mmio(bcm, flags);
+ if (oldstate)
+ *oldstate = old;
+
+ return 0;
+}
+
+static int bcm43xx_read_radioinfo(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u32 radio_id;
+ u16 manufact;
+ u16 version;
+ u8 revision;
+ s8 i;
+
+ if (bcm->chip_id == 0x4317) {
+ if (bcm->chip_rev == 0x00)
+ radio_id = 0x3205017F;
+ else if (bcm->chip_rev == 0x01)
+ radio_id = 0x4205017F;
+ else
+ radio_id = 0x5205017F;
+ } else {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, BCM43xx_RADIOCTL_ID);
+ radio_id = bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_DATA_HIGH);
+ radio_id <<= 16;
+ bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, BCM43xx_RADIOCTL_ID);
+ radio_id |= bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_DATA_LOW);
+ }
+
+ manufact = (radio_id & 0x00000FFF);
+ version = (radio_id & 0x0FFFF000) >> 12;
+ revision = (radio_id & 0xF0000000) >> 28;
+
+ dprintk(KERN_INFO PFX "Detected Radio: ID: %x (Manuf: %x Ver: %x Rev: %x)\n",
+ radio_id, manufact, version, revision);
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ if ((version != 0x2060) || (revision != 1) || (manufact != 0x17f))
+ goto err_unsupported_radio;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ if ((version & 0xFFF0) != 0x2050)
+ goto err_unsupported_radio;
+ break;
+ case BCM43xx_PHYTYPE_G:
+ if (version != 0x2050)
+ goto err_unsupported_radio;
+ break;
+ }
+
+ radio->manufact = manufact;
+ radio->version = version;
+ radio->revision = revision;
+
+ /* Set default attenuation values. */
+ radio->baseband_atten = bcm43xx_default_baseband_attenuation(bcm);
+ radio->radio_atten = bcm43xx_default_radio_attenuation(bcm);
+ radio->txctl1 = bcm43xx_default_txctl1(bcm);
+ radio->txctl2 = 0xFFFF;
+ if (phy->type == BCM43xx_PHYTYPE_A)
+ radio->txpower_desired = bcm->sprom.maxpower_aphy;
+ else
+ radio->txpower_desired = bcm->sprom.maxpower_bgphy;
+
+ /* Initialize the in-memory nrssi Lookup Table. */
+ for (i = 0; i < 64; i++)
+ radio->nrssi_lt[i] = i;
+
+ return 0;
+
+err_unsupported_radio:
+ printk(KERN_ERR PFX "Unsupported Radio connected to the PHY!\n");
+ return -ENODEV;
+}
+
+static const char * bcm43xx_locale_iso(u8 locale)
+{
+ /* ISO 3166-1 country codes.
+ * Note that there aren't ISO 3166-1 codes for
+ * all or locales. (Not all locales are countries)
+ */
+ switch (locale) {
+ case BCM43xx_LOCALE_WORLD:
+ case BCM43xx_LOCALE_ALL:
+ return "XX";
+ case BCM43xx_LOCALE_THAILAND:
+ return "TH";
+ case BCM43xx_LOCALE_ISRAEL:
+ return "IL";
+ case BCM43xx_LOCALE_JORDAN:
+ return "JO";
+ case BCM43xx_LOCALE_CHINA:
+ return "CN";
+ case BCM43xx_LOCALE_JAPAN:
+ case BCM43xx_LOCALE_JAPAN_HIGH:
+ return "JP";
+ case BCM43xx_LOCALE_USA_CANADA_ANZ:
+ case BCM43xx_LOCALE_USA_LOW:
+ return "US";
+ case BCM43xx_LOCALE_EUROPE:
+ return "EU";
+ case BCM43xx_LOCALE_NONE:
+ return " ";
+ }
+ assert(0);
+ return " ";
+}
+
+static const char * bcm43xx_locale_string(u8 locale)
+{
+ switch (locale) {
+ case BCM43xx_LOCALE_WORLD:
+ return "World";
+ case BCM43xx_LOCALE_THAILAND:
+ return "Thailand";
+ case BCM43xx_LOCALE_ISRAEL:
+ return "Israel";
+ case BCM43xx_LOCALE_JORDAN:
+ return "Jordan";
+ case BCM43xx_LOCALE_CHINA:
+ return "China";
+ case BCM43xx_LOCALE_JAPAN:
+ return "Japan";
+ case BCM43xx_LOCALE_USA_CANADA_ANZ:
+ return "USA/Canada/ANZ";
+ case BCM43xx_LOCALE_EUROPE:
+ return "Europe";
+ case BCM43xx_LOCALE_USA_LOW:
+ return "USAlow";
+ case BCM43xx_LOCALE_JAPAN_HIGH:
+ return "JapanHigh";
+ case BCM43xx_LOCALE_ALL:
+ return "All";
+ case BCM43xx_LOCALE_NONE:
+ return "None";
+ }
+ assert(0);
+ return "";
+}
+
+static inline u8 bcm43xx_crc8(u8 crc, u8 data)
+{
+ static const u8 t[] = {
+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
+ };
+ return t[crc ^ data];
+}
+
+static u8 bcm43xx_sprom_crc(const u16 *sprom)
+{
+ int word;
+ u8 crc = 0xFF;
+
+ for (word = 0; word < BCM43xx_SPROM_SIZE - 1; word++) {
+ crc = bcm43xx_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcm43xx_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+ crc = bcm43xx_crc8(crc, sprom[BCM43xx_SPROM_VERSION] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+}
+
+int bcm43xx_sprom_read(struct bcm43xx_private *bcm, u16 *sprom)
+{
+ int i;
+ u8 crc, expected_crc;
+
+ for (i = 0; i < BCM43xx_SPROM_SIZE; i++)
+ sprom[i] = bcm43xx_read16(bcm, BCM43xx_SPROM_BASE + (i * 2));
+ /* CRC-8 check. */
+ crc = bcm43xx_sprom_crc(sprom);
+ expected_crc = (sprom[BCM43xx_SPROM_VERSION] & 0xFF00) >> 8;
+ if (crc != expected_crc) {
+ printk(KERN_WARNING PFX "WARNING: Invalid SPROM checksum "
+ "(0x%02X, expected: 0x%02X)\n",
+ crc, expected_crc);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int bcm43xx_sprom_write(struct bcm43xx_private *bcm, const u16 *sprom)
+{
+ int i, err;
+ u8 crc, expected_crc;
+ u32 spromctl;
+
+ /* CRC-8 validation of the input data. */
+ crc = bcm43xx_sprom_crc(sprom);
+ expected_crc = (sprom[BCM43xx_SPROM_VERSION] & 0xFF00) >> 8;
+ if (crc != expected_crc) {
+ printk(KERN_ERR PFX "SPROM input data: Invalid CRC\n");
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+ spromctl |= 0x10; /* SPROM WRITE enable. */
+ bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+ /* We must burn lots of CPU cycles here, but that does not
+ * really matter as one does not write the SPROM every other minute...
+ */
+ printk(KERN_INFO PFX "[ 0%%");
+ mdelay(500);
+ for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+ if (i == 16)
+ printk("25%%");
+ else if (i == 32)
+ printk("50%%");
+ else if (i == 48)
+ printk("75%%");
+ else if (i % 2)
+ printk(".");
+ bcm43xx_write16(bcm, BCM43xx_SPROM_BASE + (i * 2), sprom[i]);
+ mmiowb();
+ mdelay(20);
+ }
+ spromctl &= ~0x10; /* SPROM WRITE enable. */
+ bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+ mdelay(500);
+ printk("100%% ]\n");
+ printk(KERN_INFO PFX "SPROM written.\n");
+ bcm43xx_controller_restart(bcm, "SPROM update");
+
+ return 0;
+err_ctlreg:
+ printk(KERN_ERR PFX "Could not access SPROM control register.\n");
+ return -ENODEV;
+}
+
+static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
+{
+ u16 value;
+ u16 *sprom;
+#ifdef CONFIG_BCM947XX
+ char *c;
+#endif
+
+ sprom = kzalloc(BCM43xx_SPROM_SIZE * sizeof(u16),
+ GFP_KERNEL);
+ if (!sprom) {
+ printk(KERN_ERR PFX "sprom_extract OOM\n");
+ return -ENOMEM;
+ }
+#ifdef CONFIG_BCM947XX
+ sprom[BCM43xx_SPROM_BOARDFLAGS2] = atoi(nvram_get("boardflags2"));
+ sprom[BCM43xx_SPROM_BOARDFLAGS] = atoi(nvram_get("boardflags"));
+
+ if ((c = nvram_get("il0macaddr")) != NULL)
+ e_aton(c, (char *) &(sprom[BCM43xx_SPROM_IL0MACADDR]));
+
+ if ((c = nvram_get("et1macaddr")) != NULL)
+ e_aton(c, (char *) &(sprom[BCM43xx_SPROM_ET1MACADDR]));
+
+ sprom[BCM43xx_SPROM_PA0B0] = atoi(nvram_get("pa0b0"));
+ sprom[BCM43xx_SPROM_PA0B1] = atoi(nvram_get("pa0b1"));
+ sprom[BCM43xx_SPROM_PA0B2] = atoi(nvram_get("pa0b2"));
+
+ sprom[BCM43xx_SPROM_PA1B0] = atoi(nvram_get("pa1b0"));
+ sprom[BCM43xx_SPROM_PA1B1] = atoi(nvram_get("pa1b1"));
+ sprom[BCM43xx_SPROM_PA1B2] = atoi(nvram_get("pa1b2"));
+
+ sprom[BCM43xx_SPROM_BOARDREV] = atoi(nvram_get("boardrev"));
+#else
+ bcm43xx_sprom_read(bcm, sprom);
+#endif
+
+ /* boardflags2 */
+ value = sprom[BCM43xx_SPROM_BOARDFLAGS2];
+ bcm->sprom.boardflags2 = value;
+
+ /* il0macaddr */
+ value = sprom[BCM43xx_SPROM_IL0MACADDR + 0];
+ *(((u16 *)bcm->sprom.il0macaddr) + 0) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_IL0MACADDR + 1];
+ *(((u16 *)bcm->sprom.il0macaddr) + 1) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_IL0MACADDR + 2];
+ *(((u16 *)bcm->sprom.il0macaddr) + 2) = cpu_to_be16(value);
+
+ /* et0macaddr */
+ value = sprom[BCM43xx_SPROM_ET0MACADDR + 0];
+ *(((u16 *)bcm->sprom.et0macaddr) + 0) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_ET0MACADDR + 1];
+ *(((u16 *)bcm->sprom.et0macaddr) + 1) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_ET0MACADDR + 2];
+ *(((u16 *)bcm->sprom.et0macaddr) + 2) = cpu_to_be16(value);
+
+ /* et1macaddr */
+ value = sprom[BCM43xx_SPROM_ET1MACADDR + 0];
+ *(((u16 *)bcm->sprom.et1macaddr) + 0) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_ET1MACADDR + 1];
+ *(((u16 *)bcm->sprom.et1macaddr) + 1) = cpu_to_be16(value);
+ value = sprom[BCM43xx_SPROM_ET1MACADDR + 2];
+ *(((u16 *)bcm->sprom.et1macaddr) + 2) = cpu_to_be16(value);
+
+ /* ethernet phy settings */
+ value = sprom[BCM43xx_SPROM_ETHPHY];
+ bcm->sprom.et0phyaddr = (value & 0x001F);
+ bcm->sprom.et1phyaddr = (value & 0x03E0) >> 5;
+ bcm->sprom.et0mdcport = (value & (1 << 14)) >> 14;
+ bcm->sprom.et1mdcport = (value & (1 << 15)) >> 15;
+
+ /* boardrev, antennas, locale */
+ value = sprom[BCM43xx_SPROM_BOARDREV];
+ bcm->sprom.boardrev = (value & 0x00FF);
+ bcm->sprom.locale = (value & 0x0F00) >> 8;
+ bcm->sprom.antennas_aphy = (value & 0x3000) >> 12;
+ bcm->sprom.antennas_bgphy = (value & 0xC000) >> 14;
+ if (modparam_locale != -1) {
+ if (modparam_locale >= 0 && modparam_locale <= 11) {
+ bcm->sprom.locale = modparam_locale;
+ printk(KERN_WARNING PFX "Operating with modified "
+ "LocaleCode %u (%s)\n",
+ bcm->sprom.locale,
+ bcm43xx_locale_string(bcm->sprom.locale));
+ } else {
+ printk(KERN_WARNING PFX "Module parameter \"locale\" "
+ "invalid value. (0 - 11)\n");
+ }
+ }
+
+ /* pa0b* */
+ value = sprom[BCM43xx_SPROM_PA0B0];
+ bcm->sprom.pa0b0 = value;
+ value = sprom[BCM43xx_SPROM_PA0B1];
+ bcm->sprom.pa0b1 = value;
+ value = sprom[BCM43xx_SPROM_PA0B2];
+ bcm->sprom.pa0b2 = value;
+
+ /* wl0gpio* */
+ value = sprom[BCM43xx_SPROM_WL0GPIO0];
+ if (value == 0x0000)
+ value = 0xFFFF;
+ bcm->sprom.wl0gpio0 = value & 0x00FF;
+ bcm->sprom.wl0gpio1 = (value & 0xFF00) >> 8;
+ value = sprom[BCM43xx_SPROM_WL0GPIO2];
+ if (value == 0x0000)
+ value = 0xFFFF;
+ bcm->sprom.wl0gpio2 = value & 0x00FF;
+ bcm->sprom.wl0gpio3 = (value & 0xFF00) >> 8;
+
+ /* maxpower */
+ value = sprom[BCM43xx_SPROM_MAXPWR];
+ bcm->sprom.maxpower_aphy = (value & 0xFF00) >> 8;
+ bcm->sprom.maxpower_bgphy = value & 0x00FF;
+
+ /* pa1b* */
+ value = sprom[BCM43xx_SPROM_PA1B0];
+ bcm->sprom.pa1b0 = value;
+ value = sprom[BCM43xx_SPROM_PA1B1];
+ bcm->sprom.pa1b1 = value;
+ value = sprom[BCM43xx_SPROM_PA1B2];
+ bcm->sprom.pa1b2 = value;
+
+ /* idle tssi target */
+ value = sprom[BCM43xx_SPROM_IDL_TSSI_TGT];
+ bcm->sprom.idle_tssi_tgt_aphy = value & 0x00FF;
+ bcm->sprom.idle_tssi_tgt_bgphy = (value & 0xFF00) >> 8;
+
+ /* boardflags */
+ value = sprom[BCM43xx_SPROM_BOARDFLAGS];
+ if (value == 0xFFFF)
+ value = 0x0000;
+ bcm->sprom.boardflags = value;
+ /* boardflags workarounds */
+ if (bcm->board_vendor == PCI_VENDOR_ID_DELL &&
+ bcm->chip_id == 0x4301 &&
+ bcm->board_revision == 0x74)
+ bcm->sprom.boardflags |= BCM43xx_BFL_BTCOEXIST;
+ if (bcm->board_vendor == PCI_VENDOR_ID_APPLE &&
+ bcm->board_type == 0x4E &&
+ bcm->board_revision > 0x40)
+ bcm->sprom.boardflags |= BCM43xx_BFL_PACTRL;
+
+ /* antenna gain */
+ value = sprom[BCM43xx_SPROM_ANTENNA_GAIN];
+ if (value == 0x0000 || value == 0xFFFF)
+ value = 0x0202;
+ /* convert values to Q5.2 */
+ bcm->sprom.antennagain_aphy = ((value & 0xFF00) >> 8) * 4;
+ bcm->sprom.antennagain_bgphy = (value & 0x00FF) * 4;
+
+ kfree(sprom);
+
+ return 0;
+}
+
+static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
+{
+ struct ieee80211_geo geo;
+ struct ieee80211_channel *chan;
+ int have_a = 0, have_bg = 0;
+ int i;
+ u8 channel;
+ struct bcm43xx_phyinfo *phy;
+ const char *iso_country;
+
+ memset(&geo, 0, sizeof(geo));
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ phy = &(bcm->core_80211_ext[i].phy);
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ have_bg = 1;
+ break;
+ case BCM43xx_PHYTYPE_A:
+ have_a = 1;
+ break;
+ default:
+ assert(0);
+ }
+ }
+ iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
+
+ if (have_a) {
+ for (i = 0, channel = 0; channel < 201; channel++) {
+ chan = &geo.a[i++];
+ chan->freq = bcm43xx_channel_to_freq_a(channel);
+ chan->channel = channel;
+ }
+ geo.a_channels = i;
+ }
+ if (have_bg) {
+ for (i = 0, channel = 1; channel < 15; channel++) {
+ chan = &geo.bg[i++];
+ chan->freq = bcm43xx_channel_to_freq_bg(channel);
+ chan->channel = channel;
+ }
+ geo.bg_channels = i;
+ }
+ memcpy(geo.name, iso_country, 2);
+ if (0 /*TODO: Outdoor use only */)
+ geo.name[2] = 'O';
+ else if (0 /*TODO: Indoor use only */)
+ geo.name[2] = 'I';
+ else
+ geo.name[2] = ' ';
+ geo.name[3] = '\0';
+
+ ieee80211_set_geo(bcm->ieee, &geo);
+}
+
+/* DummyTransmission function, as documented on
+ * http://bcm-specs.sipsolutions.net/DummyTransmission
+ */
+void bcm43xx_dummy_transmission(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ unsigned int i, max_loop;
+ u16 value = 0;
+ u32 buffer[5] = {
+ 0x00000000,
+ 0x0000D400,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ };
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ max_loop = 0x1E;
+ buffer[0] = 0xCC010200;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ max_loop = 0xFA;
+ buffer[0] = 0x6E840B00;
+ break;
+ default:
+ assert(0);
+ return;
+ }
+
+ for (i = 0; i < 5; i++)
+ bcm43xx_ram_write(bcm, i * 4, buffer[i]);
+
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */
+
+ bcm43xx_write16(bcm, 0x0568, 0x0000);
+ bcm43xx_write16(bcm, 0x07C0, 0x0000);
+ bcm43xx_write16(bcm, 0x050C, ((phy->type == BCM43xx_PHYTYPE_A) ? 1 : 0));
+ bcm43xx_write16(bcm, 0x0508, 0x0000);
+ bcm43xx_write16(bcm, 0x050A, 0x0000);
+ bcm43xx_write16(bcm, 0x054C, 0x0000);
+ bcm43xx_write16(bcm, 0x056A, 0x0014);
+ bcm43xx_write16(bcm, 0x0568, 0x0826);
+ bcm43xx_write16(bcm, 0x0500, 0x0000);
+ bcm43xx_write16(bcm, 0x0502, 0x0030);
+
+ if (radio->version == 0x2050 && radio->revision <= 0x5)
+ bcm43xx_radio_write16(bcm, 0x0051, 0x0017);
+ for (i = 0x00; i < max_loop; i++) {
+ value = bcm43xx_read16(bcm, 0x050E);
+ if (value & 0x0080)
+ break;
+ udelay(10);
+ }
+ for (i = 0x00; i < 0x0A; i++) {
+ value = bcm43xx_read16(bcm, 0x050E);
+ if (value & 0x0400)
+ break;
+ udelay(10);
+ }
+ for (i = 0x00; i < 0x0A; i++) {
+ value = bcm43xx_read16(bcm, 0x0690);
+ if (!(value & 0x0100))
+ break;
+ udelay(10);
+ }
+ if (radio->version == 0x2050 && radio->revision <= 0x5)
+ bcm43xx_radio_write16(bcm, 0x0051, 0x0037);
+}
+
+static void key_write(struct bcm43xx_private *bcm,
+ u8 index, u8 algorithm, const u16 *key)
+{
+ unsigned int i, basic_wep = 0;
+ u32 offset;
+ u16 value;
+
+ /* Write associated key information */
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x100 + (index * 2),
+ ((index << 4) | (algorithm & 0x0F)));
+
+ /* The first 4 WEP keys need extra love */
+ if (((algorithm == BCM43xx_SEC_ALGO_WEP) ||
+ (algorithm == BCM43xx_SEC_ALGO_WEP104)) && (index < 4))
+ basic_wep = 1;
+
+ /* Write key payload, 8 little endian words */
+ offset = bcm->security_offset + (index * BCM43xx_SEC_KEYSIZE);
+ for (i = 0; i < (BCM43xx_SEC_KEYSIZE / sizeof(u16)); i++) {
+ value = cpu_to_le16(key[i]);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED,
+ offset + (i * 2), value);
+
+ if (!basic_wep)
+ continue;
+
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED,
+ offset + (i * 2) + 4 * BCM43xx_SEC_KEYSIZE,
+ value);
+ }
+}
+
+static void keymac_write(struct bcm43xx_private *bcm,
+ u8 index, const u32 *addr)
+{
+ /* for keys 0-3 there is no associated mac address */
+ if (index < 4)
+ return;
+
+ index -= 4;
+ if (bcm->current_core->rev >= 5) {
+ bcm43xx_shm_write32(bcm,
+ BCM43xx_SHM_HWMAC,
+ index * 2,
+ cpu_to_be32(*addr));
+ bcm43xx_shm_write16(bcm,
+ BCM43xx_SHM_HWMAC,
+ (index * 2) + 1,
+ cpu_to_be16(*((u16 *)(addr + 1))));
+ } else {
+ if (index < 8) {
+ TODO(); /* Put them in the macaddress filter */
+ } else {
+ TODO();
+ /* Put them BCM43xx_SHM_SHARED, stating index 0x0120.
+ Keep in mind to update the count of keymacs in 0x003E as well! */
+ }
+ }
+}
+
+static int bcm43xx_key_write(struct bcm43xx_private *bcm,
+ u8 index, u8 algorithm,
+ const u8 *_key, int key_len,
+ const u8 *mac_addr)
+{
+ u8 key[BCM43xx_SEC_KEYSIZE] = { 0 };
+
+ if (index >= ARRAY_SIZE(bcm->key))
+ return -EINVAL;
+ if (key_len > ARRAY_SIZE(key))
+ return -EINVAL;
+ if (algorithm < 1 || algorithm > 5)
+ return -EINVAL;
+
+ memcpy(key, _key, key_len);
+ key_write(bcm, index, algorithm, (const u16 *)key);
+ keymac_write(bcm, index, (const u32 *)mac_addr);
+
+ bcm->key[index].algorithm = algorithm;
+
+ return 0;
+}
+
+static void bcm43xx_clear_keys(struct bcm43xx_private *bcm)
+{
+ static const u32 zero_mac[2] = { 0 };
+ unsigned int i,j, nr_keys = 54;
+ u16 offset;
+
+ if (bcm->current_core->rev < 5)
+ nr_keys = 16;
+ assert(nr_keys <= ARRAY_SIZE(bcm->key));
+
+ for (i = 0; i < nr_keys; i++) {
+ bcm->key[i].enabled = 0;
+ /* returns for i < 4 immediately */
+ keymac_write(bcm, i, zero_mac);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED,
+ 0x100 + (i * 2), 0x0000);
+ for (j = 0; j < 8; j++) {
+ offset = bcm->security_offset + (j * 4) + (i * BCM43xx_SEC_KEYSIZE);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED,
+ offset, 0x0000);
+ }
+ }
+ dprintk(KERN_INFO PFX "Keys cleared\n");
+}
+
+/* Lowlevel core-switch function. This is only to be used in
+ * bcm43xx_switch_core() and bcm43xx_probe_cores()
+ */
+static int _switch_core(struct bcm43xx_private *bcm, int core)
+{
+ int err;
+ int attempts = 0;
+ u32 current_core;
+
+ assert(core >= 0);
+ while (1) {
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_ACTIVE_CORE,
+ (core * 0x1000) + 0x18000000);
+ if (unlikely(err))
+ goto error;
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_ACTIVE_CORE,
+ ¤t_core);
+ if (unlikely(err))
+ goto error;
+ current_core = (current_core - 0x18000000) / 0x1000;
+ if (current_core == core)
+ break;
+
+ if (unlikely(attempts++ > BCM43xx_SWITCH_CORE_MAX_RETRIES))
+ goto error;
+ udelay(10);
+ }
+#ifdef CONFIG_BCM947XX
+ if (bcm->pci_dev->bus->number == 0)
+ bcm->current_core_offset = 0x1000 * core;
+ else
+ bcm->current_core_offset = 0;
+#endif
+
+ return 0;
+error:
+ printk(KERN_ERR PFX "Failed to switch to core %d\n", core);
+ return -ENODEV;
+}
+
+int bcm43xx_switch_core(struct bcm43xx_private *bcm, struct bcm43xx_coreinfo *new_core)
+{
+ int err;
+
+ if (unlikely(!new_core))
+ return 0;
+ if (!new_core->available)
+ return -ENODEV;
+ if (bcm->current_core == new_core)
+ return 0;
+ err = _switch_core(bcm, new_core->index);
+ if (unlikely(err))
+ goto out;
+
+ bcm->current_core = new_core;
+ bcm->current_80211_core_idx = -1;
+ if (new_core->id == BCM43xx_COREID_80211)
+ bcm->current_80211_core_idx = (int)(new_core - &(bcm->core_80211[0]));
+
+out:
+ return err;
+}
+
+static int bcm43xx_core_enabled(struct bcm43xx_private *bcm)
+{
+ u32 value;
+
+ value = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ value &= BCM43xx_SBTMSTATELOW_CLOCK | BCM43xx_SBTMSTATELOW_RESET
+ | BCM43xx_SBTMSTATELOW_REJECT;
+
+ return (value == BCM43xx_SBTMSTATELOW_CLOCK);
+}
+
+/* disable current core */
+static int bcm43xx_core_disable(struct bcm43xx_private *bcm, u32 core_flags)
+{
+ u32 sbtmstatelow;
+ u32 sbtmstatehigh;
+ int i;
+
+ /* fetch sbtmstatelow from core information registers */
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+
+ /* core is already in reset */
+ if (sbtmstatelow & BCM43xx_SBTMSTATELOW_RESET)
+ goto out;
+
+ if (sbtmstatelow & BCM43xx_SBTMSTATELOW_CLOCK) {
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK |
+ BCM43xx_SBTMSTATELOW_REJECT;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+
+ for (i = 0; i < 1000; i++) {
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ if (sbtmstatelow & BCM43xx_SBTMSTATELOW_REJECT) {
+ i = -1;
+ break;
+ }
+ udelay(10);
+ }
+ if (i != -1) {
+ printk(KERN_ERR PFX "Error: core_disable() REJECT timeout!\n");
+ return -EBUSY;
+ }
+
+ for (i = 0; i < 1000; i++) {
+ sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH);
+ if (!(sbtmstatehigh & BCM43xx_SBTMSTATEHIGH_BUSY)) {
+ i = -1;
+ break;
+ }
+ udelay(10);
+ }
+ if (i != -1) {
+ printk(KERN_ERR PFX "Error: core_disable() BUSY timeout!\n");
+ return -EBUSY;
+ }
+
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK |
+ BCM43xx_SBTMSTATELOW_REJECT |
+ BCM43xx_SBTMSTATELOW_RESET |
+ BCM43xx_SBTMSTATELOW_CLOCK |
+ core_flags;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(10);
+ }
+
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_RESET |
+ BCM43xx_SBTMSTATELOW_REJECT |
+ core_flags;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+
+out:
+ bcm->current_core->enabled = 0;
+
+ return 0;
+}
+
+/* enable (reset) current core */
+static int bcm43xx_core_enable(struct bcm43xx_private *bcm, u32 core_flags)
+{
+ u32 sbtmstatelow;
+ u32 sbtmstatehigh;
+ u32 sbimstate;
+ int err;
+
+ err = bcm43xx_core_disable(bcm, core_flags);
+ if (err)
+ goto out;
+
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK |
+ BCM43xx_SBTMSTATELOW_RESET |
+ BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK |
+ core_flags;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(1);
+
+ sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH);
+ if (sbtmstatehigh & BCM43xx_SBTMSTATEHIGH_SERROR) {
+ sbtmstatehigh = 0x00000000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATEHIGH, sbtmstatehigh);
+ }
+
+ sbimstate = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMSTATE);
+ if (sbimstate & (BCM43xx_SBIMSTATE_IB_ERROR | BCM43xx_SBIMSTATE_TIMEOUT)) {
+ sbimstate &= ~(BCM43xx_SBIMSTATE_IB_ERROR | BCM43xx_SBIMSTATE_TIMEOUT);
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBIMSTATE, sbimstate);
+ }
+
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK |
+ BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK |
+ core_flags;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(1);
+
+ sbtmstatelow = BCM43xx_SBTMSTATELOW_CLOCK | core_flags;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(1);
+
+ bcm->current_core->enabled = 1;
+ assert(err == 0);
+out:
+ return err;
+}
+
+/* http://bcm-specs.sipsolutions.net/80211CoreReset */
+void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy)
+{
+ u32 flags = 0x00040000;
+
+ if ((bcm43xx_core_enabled(bcm)) &&
+ !bcm43xx_using_pio(bcm)) {
+//FIXME: Do we _really_ want #ifndef CONFIG_BCM947XX here?
+#ifndef CONFIG_BCM947XX
+ /* reset all used DMA controllers. */
+ bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
+ bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA2_BASE);
+ bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA3_BASE);
+ bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
+ bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
+ if (bcm->current_core->rev < 5)
+ bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
+#endif
+ }
+ if (bcm->shutting_down) {
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD)
+ & ~(BCM43xx_SBF_MAC_ENABLED | 0x00000002));
+ } else {
+ if (connect_phy)
+ flags |= 0x20000000;
+ bcm43xx_phy_connect(bcm, connect_phy);
+ bcm43xx_core_enable(bcm, flags);
+ bcm43xx_write16(bcm, 0x03E6, 0x0000);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD)
+ | BCM43xx_SBF_400);
+ }
+}
+
+static void bcm43xx_wireless_core_disable(struct bcm43xx_private *bcm)
+{
+ bcm43xx_radio_turn_off(bcm);
+ bcm43xx_write16(bcm, 0x03E6, 0x00F4);
+ bcm43xx_core_disable(bcm, 0);
+}
+
+/* Mark the current 80211 core inactive.
+ * "active_80211_core" is the other 80211 core, which is used.
+ */
+static int bcm43xx_wireless_core_mark_inactive(struct bcm43xx_private *bcm,
+ struct bcm43xx_coreinfo *active_80211_core)
+{
+ u32 sbtmstatelow;
+ struct bcm43xx_coreinfo *old_core;
+ int err = 0;
+
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_radio_turn_off(bcm);
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ sbtmstatelow &= ~0x200a0000;
+ sbtmstatelow |= 0xa0000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(1);
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ sbtmstatelow &= ~0xa0000;
+ sbtmstatelow |= 0x80000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ udelay(1);
+
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_G) {
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, active_80211_core);
+ if (err)
+ goto out;
+ sbtmstatelow = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ sbtmstatelow &= ~0x20000000;
+ sbtmstatelow |= 0x20000000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, sbtmstatelow);
+ err = bcm43xx_switch_core(bcm, old_core);
+ }
+
+out:
+ return err;
+}
+
+static void handle_irq_transmit_status(struct bcm43xx_private *bcm)
+{
+ u32 v0, v1;
+ u16 tmp;
+ struct bcm43xx_xmitstatus stat;
+
+ while (1) {
+ v0 = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0);
+ if (!v0)
+ break;
+ v1 = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1);
+
+ stat.cookie = (v0 >> 16) & 0x0000FFFF;
+ tmp = (u16)((v0 & 0xFFF0) | ((v0 & 0xF) >> 1));
+ stat.flags = tmp & 0xFF;
+ stat.cnt1 = (tmp & 0x0F00) >> 8;
+ stat.cnt2 = (tmp & 0xF000) >> 12;
+ stat.seq = (u16)(v1 & 0xFFFF);
+ stat.unknown = (u16)((v1 >> 16) & 0xFF);
+
+ bcm43xx_debugfs_log_txstat(bcm, &stat);
+
+ if (stat.flags & BCM43xx_TXSTAT_FLAG_IGNORE)
+ continue;
+ if (!(stat.flags & BCM43xx_TXSTAT_FLAG_ACK)) {
+ //TODO: packet was not acked (was lost)
+ }
+ //TODO: There are more (unknown) flags to test. see bcm43xx_main.h
+
+ if (bcm43xx_using_pio(bcm))
+ bcm43xx_pio_handle_xmitstatus(bcm, &stat);
+ else
+ bcm43xx_dma_handle_xmitstatus(bcm, &stat);
+ }
+}
+
+static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm)
+{
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x40A, 0x7F7F);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD) | (1 << 4));
+ assert(bcm->noisecalc.core_at_start == bcm->current_core);
+ assert(bcm->noisecalc.channel_at_start == bcm43xx_current_radio(bcm)->channel);
+}
+
+static void bcm43xx_calculate_link_quality(struct bcm43xx_private *bcm)
+{
+ /* Top half of Link Quality calculation. */
+
+ if (bcm->noisecalc.calculation_running)
+ return;
+ bcm->noisecalc.core_at_start = bcm->current_core;
+ bcm->noisecalc.channel_at_start = bcm43xx_current_radio(bcm)->channel;
+ bcm->noisecalc.calculation_running = 1;
+ bcm->noisecalc.nr_samples = 0;
+
+ bcm43xx_generate_noise_sample(bcm);
+}
+
+static void handle_irq_noise(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 tmp;
+ u8 noise[4];
+ u8 i, j;
+ s32 average;
+
+ /* Bottom half of Link Quality calculation. */
+
+ assert(bcm->noisecalc.calculation_running);
+ if (bcm->noisecalc.core_at_start != bcm->current_core ||
+ bcm->noisecalc.channel_at_start != radio->channel)
+ goto drop_calculation;
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x408);
+ noise[0] = (tmp & 0x00FF);
+ noise[1] = (tmp & 0xFF00) >> 8;
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x40A);
+ noise[2] = (tmp & 0x00FF);
+ noise[3] = (tmp & 0xFF00) >> 8;
+ if (noise[0] == 0x7F || noise[1] == 0x7F ||
+ noise[2] == 0x7F || noise[3] == 0x7F)
+ goto generate_new;
+
+ /* Get the noise samples. */
+ assert(bcm->noisecalc.nr_samples <= 8);
+ i = bcm->noisecalc.nr_samples;
+ noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ bcm->noisecalc.samples[i][0] = radio->nrssi_lt[noise[0]];
+ bcm->noisecalc.samples[i][1] = radio->nrssi_lt[noise[1]];
+ bcm->noisecalc.samples[i][2] = radio->nrssi_lt[noise[2]];
+ bcm->noisecalc.samples[i][3] = radio->nrssi_lt[noise[3]];
+ bcm->noisecalc.nr_samples++;
+ if (bcm->noisecalc.nr_samples == 8) {
+ /* Calculate the Link Quality by the noise samples. */
+ average = 0;
+ for (i = 0; i < 8; i++) {
+ for (j = 0; j < 4; j++)
+ average += bcm->noisecalc.samples[i][j];
+ }
+ average /= (8 * 4);
+ average *= 125;
+ average += 64;
+ average /= 128;
+
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x40C);
+ tmp = (tmp / 128) & 0x1F;
+ if (tmp >= 8)
+ average += 2;
+ else
+ average -= 25;
+ if (tmp == 8)
+ average -= 72;
+ else
+ average -= 48;
+
+/* FIXME: This is wrong, but people want fancy stats. well... */
+bcm->stats.noise = average;
+ if (average > -65)
+ bcm->stats.link_quality = 0;
+ else if (average > -75)
+ bcm->stats.link_quality = 1;
+ else if (average > -85)
+ bcm->stats.link_quality = 2;
+ else
+ bcm->stats.link_quality = 3;
+// dprintk(KERN_INFO PFX "Link Quality: %u (avg was %d)\n", bcm->stats.link_quality, average);
+drop_calculation:
+ bcm->noisecalc.calculation_running = 0;
+ return;
+ }
+generate_new:
+ bcm43xx_generate_noise_sample(bcm);
+}
+
+static void handle_irq_ps(struct bcm43xx_private *bcm)
+{
+ if (bcm->ieee->iw_mode == IW_MODE_MASTER) {
+ ///TODO: PS TBTT
+ } else {
+ if (1/*FIXME: the last PSpoll frame was sent successfully */)
+ bcm43xx_power_saving_ctl_bits(bcm, -1, -1);
+ }
+ if (bcm->ieee->iw_mode == IW_MODE_ADHOC)
+ bcm->reg124_set_0x4 = 1;
+ //FIXME else set to false?
+}
+
+static void handle_irq_reg124(struct bcm43xx_private *bcm)
+{
+ if (!bcm->reg124_set_0x4)
+ return;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD)
+ | 0x4);
+ //FIXME: reset reg124_set_0x4 to false?
+}
+
+static void handle_irq_pmq(struct bcm43xx_private *bcm)
+{
+ u32 tmp;
+
+ //TODO: AP mode.
+
+ while (1) {
+ tmp = bcm43xx_read32(bcm, BCM43xx_MMIO_PS_STATUS);
+ if (!(tmp & 0x00000008))
+ break;
+ }
+ /* 16bit write is odd, but correct. */
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PS_STATUS, 0x0002);
+}
+
+static void bcm43xx_generate_beacon_template(struct bcm43xx_private *bcm,
+ u16 ram_offset, u16 shm_size_offset)
+{
+ u32 value;
+ u16 size = 0;
+
+ /* Timestamp. */
+ //FIXME: assumption: The chip sets the timestamp
+ value = 0;
+ bcm43xx_ram_write(bcm, ram_offset++, value);
+ bcm43xx_ram_write(bcm, ram_offset++, value);
+ size += 8;
+
+ /* Beacon Interval / Capability Information */
+ value = 0x0000;//FIXME: Which interval?
+ value |= (1 << 0) << 16; /* ESS */
+ value |= (1 << 2) << 16; /* CF Pollable */ //FIXME?
+ value |= (1 << 3) << 16; /* CF Poll Request */ //FIXME?
+ if (!bcm->ieee->open_wep)
+ value |= (1 << 4) << 16; /* Privacy */
+ bcm43xx_ram_write(bcm, ram_offset++, value);
+ size += 4;
+
+ /* SSID */
+ //TODO
+
+ /* FH Parameter Set */
+ //TODO
+
+ /* DS Parameter Set */
+ //TODO
+
+ /* CF Parameter Set */
+ //TODO
+
+ /* TIM */
+ //TODO
+
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, shm_size_offset, size);
+}
+
+static void handle_irq_beacon(struct bcm43xx_private *bcm)
+{
+ u32 status;
+
+ bcm->irq_savedstate &= ~BCM43xx_IRQ_BEACON;
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD);
+
+ if ((status & 0x1) && (status & 0x2)) {
+ /* ACK beacon IRQ. */
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON,
+ BCM43xx_IRQ_BEACON);
+ bcm->irq_savedstate |= BCM43xx_IRQ_BEACON;
+ return;
+ }
+ if (!(status & 0x1)) {
+ bcm43xx_generate_beacon_template(bcm, 0x68, 0x18);
+ status |= 0x1;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, status);
+ }
+ if (!(status & 0x2)) {
+ bcm43xx_generate_beacon_template(bcm, 0x468, 0x1A);
+ status |= 0x2;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD, status);
+ }
+}
+
+/* Interrupt handler bottom-half */
+static void bcm43xx_interrupt_tasklet(struct bcm43xx_private *bcm)
+{
+ u32 reason;
+ u32 dma_reason[4];
+ int activity = 0;
+ unsigned long flags;
+
+#ifdef CONFIG_BCM43XX_DEBUG
+ u32 _handled = 0x00000000;
+# define bcmirq_handled(irq) do { _handled |= (irq); } while (0)
+#else
+# define bcmirq_handled(irq) do { /* nothing */ } while (0)
+#endif /* CONFIG_BCM43XX_DEBUG*/
+
+ bcm43xx_lock_mmio(bcm, flags);
+ reason = bcm->irq_reason;
+ dma_reason[0] = bcm->dma_reason[0];
+ dma_reason[1] = bcm->dma_reason[1];
+ dma_reason[2] = bcm->dma_reason[2];
+ dma_reason[3] = bcm->dma_reason[3];
+
+ if (unlikely(reason & BCM43xx_IRQ_XMIT_ERROR)) {
+ /* TX error. We get this when Template Ram is written in wrong endianess
+ * in dummy_tx(). We also get this if something is wrong with the TX header
+ * on DMA or PIO queues.
+ * Maybe we get this in other error conditions, too.
+ */
+ printkl(KERN_ERR PFX "FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR\n");
+ bcmirq_handled(BCM43xx_IRQ_XMIT_ERROR);
+ }
+ if (unlikely((dma_reason[0] & BCM43xx_DMAIRQ_FATALMASK) |
+ (dma_reason[1] & BCM43xx_DMAIRQ_FATALMASK) |
+ (dma_reason[2] & BCM43xx_DMAIRQ_FATALMASK) |
+ (dma_reason[3] & BCM43xx_DMAIRQ_FATALMASK))) {
+ printkl(KERN_ERR PFX "FATAL ERROR: Fatal DMA error: "
+ "0x%08X, 0x%08X, 0x%08X, 0x%08X\n",
+ dma_reason[0], dma_reason[1],
+ dma_reason[2], dma_reason[3]);
+ bcm43xx_controller_restart(bcm, "DMA error");
+ bcm43xx_unlock_mmio(bcm, flags);
+ return;
+ }
+ if (unlikely((dma_reason[0] & BCM43xx_DMAIRQ_NONFATALMASK) |
+ (dma_reason[1] & BCM43xx_DMAIRQ_NONFATALMASK) |
+ (dma_reason[2] & BCM43xx_DMAIRQ_NONFATALMASK) |
+ (dma_reason[3] & BCM43xx_DMAIRQ_NONFATALMASK))) {
+ printkl(KERN_ERR PFX "DMA error: "
+ "0x%08X, 0x%08X, 0x%08X, 0x%08X\n",
+ dma_reason[0], dma_reason[1],
+ dma_reason[2], dma_reason[3]);
+ }
+
+ if (reason & BCM43xx_IRQ_PS) {
+ handle_irq_ps(bcm);
+ bcmirq_handled(BCM43xx_IRQ_PS);
+ }
+
+ if (reason & BCM43xx_IRQ_REG124) {
+ handle_irq_reg124(bcm);
+ bcmirq_handled(BCM43xx_IRQ_REG124);
+ }
+
+ if (reason & BCM43xx_IRQ_BEACON) {
+ if (bcm->ieee->iw_mode == IW_MODE_MASTER)
+ handle_irq_beacon(bcm);
+ bcmirq_handled(BCM43xx_IRQ_BEACON);
+ }
+
+ if (reason & BCM43xx_IRQ_PMQ) {
+ handle_irq_pmq(bcm);
+ bcmirq_handled(BCM43xx_IRQ_PMQ);
+ }
+
+ if (reason & BCM43xx_IRQ_SCAN) {
+ /*TODO*/
+ //bcmirq_handled(BCM43xx_IRQ_SCAN);
+ }
+
+ if (reason & BCM43xx_IRQ_NOISE) {
+ handle_irq_noise(bcm);
+ bcmirq_handled(BCM43xx_IRQ_NOISE);
+ }
+
+ /* Check the DMA reason registers for received data. */
+ assert(!(dma_reason[1] & BCM43xx_DMAIRQ_RX_DONE));
+ assert(!(dma_reason[2] & BCM43xx_DMAIRQ_RX_DONE));
+ if (dma_reason[0] & BCM43xx_DMAIRQ_RX_DONE) {
+ if (bcm43xx_using_pio(bcm))
+ bcm43xx_pio_rx(bcm43xx_current_pio(bcm)->queue0);
+ else
+ bcm43xx_dma_rx(bcm43xx_current_dma(bcm)->rx_ring0);
+ /* We intentionally don't set "activity" to 1, here. */
+ }
+ if (dma_reason[3] & BCM43xx_DMAIRQ_RX_DONE) {
+ if (bcm43xx_using_pio(bcm))
+ bcm43xx_pio_rx(bcm43xx_current_pio(bcm)->queue3);
+ else
+ bcm43xx_dma_rx(bcm43xx_current_dma(bcm)->rx_ring1);
+ activity = 1;
+ }
+ bcmirq_handled(BCM43xx_IRQ_RX);
+
+ if (reason & BCM43xx_IRQ_XMIT_STATUS) {
+ handle_irq_transmit_status(bcm);
+ activity = 1;
+ //TODO: In AP mode, this also causes sending of powersave responses.
+ bcmirq_handled(BCM43xx_IRQ_XMIT_STATUS);
+ }
+
+ /* IRQ_PIO_WORKAROUND is handled in the top-half. */
+ bcmirq_handled(BCM43xx_IRQ_PIO_WORKAROUND);
+#ifdef CONFIG_BCM43XX_DEBUG
+ if (unlikely(reason & ~_handled)) {
+ printkl(KERN_WARNING PFX
+ "Unhandled IRQ! Reason: 0x%08x, Unhandled: 0x%08x, "
+ "DMA: 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+ reason, (reason & ~_handled),
+ dma_reason[0], dma_reason[1],
+ dma_reason[2], dma_reason[3]);
+ }
+#endif
+#undef bcmirq_handled
+
+ if (!modparam_noleds)
+ bcm43xx_leds_update(bcm, activity);
+ bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+static void pio_irq_workaround(struct bcm43xx_private *bcm,
+ u16 base, int queueidx)
+{
+ u16 rxctl;
+
+ rxctl = bcm43xx_read16(bcm, base + BCM43xx_PIO_RXCTL);
+ if (rxctl & BCM43xx_PIO_RXCTL_DATAAVAILABLE)
+ bcm->dma_reason[queueidx] |= BCM43xx_DMAIRQ_RX_DONE;
+ else
+ bcm->dma_reason[queueidx] &= ~BCM43xx_DMAIRQ_RX_DONE;
+}
+
+static void bcm43xx_interrupt_ack(struct bcm43xx_private *bcm, u32 reason)
+{
+ if (bcm43xx_using_pio(bcm) &&
+ (bcm->current_core->rev < 3) &&
+ (!(reason & BCM43xx_IRQ_PIO_WORKAROUND))) {
+ /* Apply a PIO specific workaround to the dma_reasons */
+ pio_irq_workaround(bcm, BCM43xx_MMIO_PIO1_BASE, 0);
+ pio_irq_workaround(bcm, BCM43xx_MMIO_PIO2_BASE, 1);
+ pio_irq_workaround(bcm, BCM43xx_MMIO_PIO3_BASE, 2);
+ pio_irq_workaround(bcm, BCM43xx_MMIO_PIO4_BASE, 3);
+ }
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, reason);
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA1_REASON,
+ bcm->dma_reason[0]);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA2_REASON,
+ bcm->dma_reason[1]);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA3_REASON,
+ bcm->dma_reason[2]);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA4_REASON,
+ bcm->dma_reason[3]);
+}
+
+/* Interrupt handler top-half */
+static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ irqreturn_t ret = IRQ_HANDLED;
+ struct bcm43xx_private *bcm = dev_id;
+ u32 reason;
+
+ if (!bcm)
+ return IRQ_NONE;
+
+ spin_lock(&bcm->_lock);
+
+ reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+ if (reason == 0xffffffff) {
+ /* irq not for us (shared irq) */
+ ret = IRQ_NONE;
+ goto out;
+ }
+ reason &= bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_MASK);
+ if (!reason)
+ goto out;
+
+ bcm->dma_reason[0] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA1_REASON)
+ & 0x0001dc00;
+ bcm->dma_reason[1] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA2_REASON)
+ & 0x0000dc00;
+ bcm->dma_reason[2] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA3_REASON)
+ & 0x0000dc00;
+ bcm->dma_reason[3] = bcm43xx_read32(bcm, BCM43xx_MMIO_DMA4_REASON)
+ & 0x0001dc00;
+
+ bcm43xx_interrupt_ack(bcm, reason);
+
+ /* Only accept IRQs, if we are initialized properly.
+ * This avoids an RX race while initializing.
+ * We should probably not enable IRQs before we are initialized
+ * completely, but some careful work is needed to fix this. I think it
+ * is best to stay with this cheap workaround for now... .
+ */
+ if (likely(bcm->initialized)) {
+ /* disable all IRQs. They are enabled again in the bottom half. */
+ bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ /* save the reason code and call our bottom half. */
+ bcm->irq_reason = reason;
+ tasklet_schedule(&bcm->isr_tasklet);
+ }
+
+out:
+ mmiowb();
+ spin_unlock(&bcm->_lock);
+
+ return ret;
+}
+
+static void bcm43xx_release_firmware(struct bcm43xx_private *bcm, int force)
+{
+ if (bcm->firmware_norelease && !force)
+ return; /* Suspending or controller reset. */
+ release_firmware(bcm->ucode);
+ bcm->ucode = NULL;
+ release_firmware(bcm->pcm);
+ bcm->pcm = NULL;
+ release_firmware(bcm->initvals0);
+ bcm->initvals0 = NULL;
+ release_firmware(bcm->initvals1);
+ bcm->initvals1 = NULL;
+}
+
+static int bcm43xx_request_firmware(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u8 rev = bcm->current_core->rev;
+ int err = 0;
+ int nr;
+ char buf[22 + sizeof(modparam_fwpostfix) - 1] = { 0 };
+
+ if (!bcm->ucode) {
+ snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_microcode%d%s.fw",
+ (rev >= 5 ? 5 : rev),
+ modparam_fwpostfix);
+ err = request_firmware(&bcm->ucode, buf, &bcm->pci_dev->dev);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Error: Microcode \"%s\" not available or load failed.\n",
+ buf);
+ goto error;
+ }
+ }
+
+ if (!bcm->pcm) {
+ snprintf(buf, ARRAY_SIZE(buf),
+ "bcm43xx_pcm%d%s.fw",
+ (rev < 5 ? 4 : 5),
+ modparam_fwpostfix);
+ err = request_firmware(&bcm->pcm, buf, &bcm->pci_dev->dev);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Error: PCM \"%s\" not available or load failed.\n",
+ buf);
+ goto error;
+ }
+ }
+
+ if (!bcm->initvals0) {
+ if (rev == 2 || rev == 4) {
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ nr = 3;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ nr = 1;
+ break;
+ default:
+ goto err_noinitval;
+ }
+
+ } else if (rev >= 5) {
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ nr = 7;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ nr = 5;
+ break;
+ default:
+ goto err_noinitval;
+ }
+ } else
+ goto err_noinitval;
+ snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw",
+ nr, modparam_fwpostfix);
+
+ err = request_firmware(&bcm->initvals0, buf, &bcm->pci_dev->dev);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Error: InitVals \"%s\" not available or load failed.\n",
+ buf);
+ goto error;
+ }
+ if (bcm->initvals0->size % sizeof(struct bcm43xx_initval)) {
+ printk(KERN_ERR PFX "InitVals fileformat error.\n");
+ goto error;
+ }
+ }
+
+ if (!bcm->initvals1) {
+ if (rev >= 5) {
+ u32 sbtmstatehigh;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ sbtmstatehigh = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH);
+ if (sbtmstatehigh & 0x00010000)
+ nr = 9;
+ else
+ nr = 10;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ nr = 6;
+ break;
+ default:
+ goto err_noinitval;
+ }
+ snprintf(buf, ARRAY_SIZE(buf), "bcm43xx_initval%02d%s.fw",
+ nr, modparam_fwpostfix);
+
+ err = request_firmware(&bcm->initvals1, buf, &bcm->pci_dev->dev);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Error: InitVals \"%s\" not available or load failed.\n",
+ buf);
+ goto error;
+ }
+ if (bcm->initvals1->size % sizeof(struct bcm43xx_initval)) {
+ printk(KERN_ERR PFX "InitVals fileformat error.\n");
+ goto error;
+ }
+ }
+ }
+
+out:
+ return err;
+error:
+ bcm43xx_release_firmware(bcm, 1);
+ goto out;
+err_noinitval:
+ printk(KERN_ERR PFX "Error: No InitVals available!\n");
+ err = -ENOENT;
+ goto error;
+}
+
+static void bcm43xx_upload_microcode(struct bcm43xx_private *bcm)
+{
+ const u32 *data;
+ unsigned int i, len;
+
+ /* Upload Microcode. */
+ data = (u32 *)(bcm->ucode->data);
+ len = bcm->ucode->size / sizeof(u32);
+ bcm43xx_shm_control_word(bcm, BCM43xx_SHM_UCODE, 0x0000);
+ for (i = 0; i < len; i++) {
+ bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA,
+ be32_to_cpu(data[i]));
+ udelay(10);
+ }
+
+ /* Upload PCM data. */
+ data = (u32 *)(bcm->pcm->data);
+ len = bcm->pcm->size / sizeof(u32);
+ bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01ea);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA, 0x00004000);
+ bcm43xx_shm_control_word(bcm, BCM43xx_SHM_PCM, 0x01eb);
+ for (i = 0; i < len; i++) {
+ bcm43xx_write32(bcm, BCM43xx_MMIO_SHM_DATA,
+ be32_to_cpu(data[i]));
+ udelay(10);
+ }
+}
+
+static int bcm43xx_write_initvals(struct bcm43xx_private *bcm,
+ const struct bcm43xx_initval *data,
+ const unsigned int len)
+{
+ u16 offset, size;
+ u32 value;
+ unsigned int i;
+
+ for (i = 0; i < len; i++) {
+ offset = be16_to_cpu(data[i].offset);
+ size = be16_to_cpu(data[i].size);
+ value = be32_to_cpu(data[i].value);
+
+ if (unlikely(offset >= 0x1000))
+ goto err_format;
+ if (size == 2) {
+ if (unlikely(value & 0xFFFF0000))
+ goto err_format;
+ bcm43xx_write16(bcm, offset, (u16)value);
+ } else if (size == 4) {
+ bcm43xx_write32(bcm, offset, value);
+ } else
+ goto err_format;
+ }
+
+ return 0;
+
+err_format:
+ printk(KERN_ERR PFX "InitVals (bcm43xx_initvalXX.fw) file-format error. "
+ "Please fix your bcm43xx firmware files.\n");
+ return -EPROTO;
+}
+
+static int bcm43xx_upload_initvals(struct bcm43xx_private *bcm)
+{
+ int err;
+
+ err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)bcm->initvals0->data,
+ bcm->initvals0->size / sizeof(struct bcm43xx_initval));
+ if (err)
+ goto out;
+ if (bcm->initvals1) {
+ err = bcm43xx_write_initvals(bcm, (struct bcm43xx_initval *)bcm->initvals1->data,
+ bcm->initvals1->size / sizeof(struct bcm43xx_initval));
+ if (err)
+ goto out;
+ }
+out:
+ return err;
+}
+
+static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm)
+{
+ int res;
+ unsigned int i;
+ u32 data;
+
+ bcm->irq = bcm->pci_dev->irq;
+#ifdef CONFIG_BCM947XX
+ if (bcm->pci_dev->bus->number == 0) {
+ struct pci_dev *d = NULL;
+ /* FIXME: we will probably need more device IDs here... */
+ d = pci_find_device(PCI_VENDOR_ID_BROADCOM, 0x4324, NULL);
+ if (d != NULL) {
+ bcm->irq = d->irq;
+ }
+ }
+#endif
+ res = request_irq(bcm->irq, bcm43xx_interrupt_handler,
+ SA_SHIRQ, KBUILD_MODNAME, bcm);
+ if (res) {
+ printk(KERN_ERR PFX "Cannot register IRQ%d\n", bcm->irq);
+ return -ENODEV;
+ }
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0xffffffff);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, 0x00020402);
+ i = 0;
+ while (1) {
+ data = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+ if (data == BCM43xx_IRQ_READY)
+ break;
+ i++;
+ if (i >= BCM43xx_IRQWAIT_MAX_RETRIES) {
+ printk(KERN_ERR PFX "Card IRQ register not responding. "
+ "Giving up.\n");
+ free_irq(bcm->irq, bcm);
+ return -ENODEV;
+ }
+ udelay(10);
+ }
+ // dummy read
+ bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+
+ return 0;
+}
+
+/* Switch to the core used to write the GPIO register.
+ * This is either the ChipCommon, or the PCI core.
+ */
+static int switch_to_gpio_core(struct bcm43xx_private *bcm)
+{
+ int err;
+
+ /* Where to find the GPIO register depends on the chipset.
+ * If it has a ChipCommon, its register at offset 0x6c is the GPIO
+ * control register. Otherwise the register at offset 0x6c in the
+ * PCI core is the GPIO control register.
+ */
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err == -ENODEV) {
+ err = bcm43xx_switch_core(bcm, &bcm->core_pci);
+ if (unlikely(err == -ENODEV)) {
+ printk(KERN_ERR PFX "gpio error: "
+ "Neither ChipCommon nor PCI core available!\n");
+ }
+ }
+
+ return err;
+}
+
+/* Initialize the GPIOs
+ * http://bcm-specs.sipsolutions.net/GPIO
+ */
+static int bcm43xx_gpio_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_coreinfo *old_core;
+ int err;
+ u32 mask, set;
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD)
+ & 0xFFFF3FFF);
+
+ bcm43xx_leds_switch_all(bcm, 0);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK) | 0x000F);
+
+ mask = 0x0000001F;
+ set = 0x0000000F;
+ if (bcm->chip_id == 0x4301) {
+ mask |= 0x0060;
+ set |= 0x0060;
+ }
+ if (0 /* FIXME: conditional unknown */) {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK)
+ | 0x0100);
+ mask |= 0x0180;
+ set |= 0x0180;
+ }
+ if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_GPIO_MASK,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_GPIO_MASK)
+ | 0x0200);
+ mask |= 0x0200;
+ set |= 0x0200;
+ }
+ if (bcm->current_core->rev >= 2)
+ mask |= 0x0010; /* FIXME: This is redundant. */
+
+ old_core = bcm->current_core;
+ err = switch_to_gpio_core(bcm);
+ if (err)
+ goto out;
+ bcm43xx_write32(bcm, BCM43xx_GPIO_CONTROL,
+ (bcm43xx_read32(bcm, BCM43xx_GPIO_CONTROL) & mask) | set);
+ err = bcm43xx_switch_core(bcm, old_core);
+out:
+ return err;
+}
+
+/* Turn off all GPIO stuff. Call this on module unload, for example. */
+static int bcm43xx_gpio_cleanup(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_coreinfo *old_core;
+ int err;
+
+ old_core = bcm->current_core;
+ err = switch_to_gpio_core(bcm);
+ if (err)
+ return err;
+ bcm43xx_write32(bcm, BCM43xx_GPIO_CONTROL, 0x00000000);
+ err = bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+
+ return 0;
+}
+
+/* http://bcm-specs.sipsolutions.net/EnableMac */
+void bcm43xx_mac_enable(struct bcm43xx_private *bcm)
+{
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD)
+ | BCM43xx_SBF_MAC_ENABLED);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, BCM43xx_IRQ_READY);
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */
+ bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */
+ bcm43xx_power_saving_ctl_bits(bcm, -1, -1);
+}
+
+/* http://bcm-specs.sipsolutions.net/SuspendMAC */
+void bcm43xx_mac_suspend(struct bcm43xx_private *bcm)
+{
+ int i;
+ u32 tmp;
+
+ bcm43xx_power_saving_ctl_bits(bcm, -1, 1);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD)
+ & ~BCM43xx_SBF_MAC_ENABLED);
+ bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); /* dummy read */
+ for (i = 100000; i; i--) {
+ tmp = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+ if (tmp & BCM43xx_IRQ_READY)
+ return;
+ udelay(10);
+ }
+ printkl(KERN_ERR PFX "MAC suspend failed\n");
+}
+
+void bcm43xx_set_iwmode(struct bcm43xx_private *bcm,
+ int iw_mode)
+{
+ unsigned long flags;
+ struct net_device *net_dev = bcm->net_dev;
+ u32 status;
+ u16 value;
+
+ spin_lock_irqsave(&bcm->ieee->lock, flags);
+ bcm->ieee->iw_mode = iw_mode;
+ spin_unlock_irqrestore(&bcm->ieee->lock, flags);
+ if (iw_mode == IW_MODE_MONITOR)
+ net_dev->type = ARPHRD_IEEE80211;
+ else
+ net_dev->type = ARPHRD_ETHER;
+
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ /* Reset status to infrastructured mode */
+ status &= ~(BCM43xx_SBF_MODE_AP | BCM43xx_SBF_MODE_MONITOR);
+ status &= ~BCM43xx_SBF_MODE_PROMISC;
+ status |= BCM43xx_SBF_MODE_NOTADHOC;
+
+/* FIXME: Always enable promisc mode, until we get the MAC filters working correctly. */
+status |= BCM43xx_SBF_MODE_PROMISC;
+
+ switch (iw_mode) {
+ case IW_MODE_MONITOR:
+ status |= BCM43xx_SBF_MODE_MONITOR;
+ status |= BCM43xx_SBF_MODE_PROMISC;
+ break;
+ case IW_MODE_ADHOC:
+ status &= ~BCM43xx_SBF_MODE_NOTADHOC;
+ break;
+ case IW_MODE_MASTER:
+ status |= BCM43xx_SBF_MODE_AP;
+ break;
+ case IW_MODE_SECOND:
+ case IW_MODE_REPEAT:
+ TODO(); /* TODO */
+ break;
+ case IW_MODE_INFRA:
+ /* nothing to be done here... */
+ break;
+ default:
+ dprintk(KERN_ERR PFX "Unknown mode in set_iwmode: %d\n", iw_mode);
+ }
+ if (net_dev->flags & IFF_PROMISC)
+ status |= BCM43xx_SBF_MODE_PROMISC;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+
+ value = 0x0002;
+ if (iw_mode != IW_MODE_ADHOC && iw_mode != IW_MODE_MASTER) {
+ if (bcm->chip_id == 0x4306 && bcm->chip_rev == 3)
+ value = 0x0064;
+ else
+ value = 0x0032;
+ }
+ bcm43xx_write16(bcm, 0x0612, value);
+}
+
+/* This is the opposite of bcm43xx_chip_init() */
+static void bcm43xx_chip_cleanup(struct bcm43xx_private *bcm)
+{
+ bcm43xx_radio_turn_off(bcm);
+ if (!modparam_noleds)
+ bcm43xx_leds_exit(bcm);
+ bcm43xx_gpio_cleanup(bcm);
+ free_irq(bcm->irq, bcm);
+ bcm43xx_release_firmware(bcm, 0);
+}
+
+/* Initialize the chip
+ * http://bcm-specs.sipsolutions.net/ChipInit
+ */
+static int bcm43xx_chip_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ int err;
+ int tmp;
+ u32 value32;
+ u16 value16;
+
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
+ BCM43xx_SBF_CORE_READY
+ | BCM43xx_SBF_400);
+
+ err = bcm43xx_request_firmware(bcm);
+ if (err)
+ goto out;
+ bcm43xx_upload_microcode(bcm);
+
+ err = bcm43xx_initialize_irq(bcm);
+ if (err)
+ goto err_release_fw;
+
+ err = bcm43xx_gpio_init(bcm);
+ if (err)
+ goto err_free_irq;
+
+ err = bcm43xx_upload_initvals(bcm);
+ if (err)
+ goto err_gpio_cleanup;
+ bcm43xx_radio_turn_on(bcm);
+
+ bcm43xx_write16(bcm, 0x03E6, 0x0000);
+ err = bcm43xx_phy_init(bcm);
+ if (err)
+ goto err_radio_off;
+
+ /* Select initial Interference Mitigation. */
+ tmp = radio->interfmode;
+ radio->interfmode = BCM43xx_RADIO_INTERFMODE_NONE;
+ bcm43xx_radio_set_interference_mitigation(bcm, tmp);
+
+ bcm43xx_phy_set_antenna_diversity(bcm);
+ bcm43xx_radio_set_txantenna(bcm, BCM43xx_RADIO_TXANTENNA_DEFAULT);
+ if (phy->type == BCM43xx_PHYTYPE_B) {
+ value16 = bcm43xx_read16(bcm, 0x005E);
+ value16 |= 0x0004;
+ bcm43xx_write16(bcm, 0x005E, value16);
+ }
+ bcm43xx_write32(bcm, 0x0100, 0x01000000);
+ if (bcm->current_core->rev < 5)
+ bcm43xx_write32(bcm, 0x010C, 0x01000000);
+
+ value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ value32 &= ~ BCM43xx_SBF_MODE_NOTADHOC;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32);
+ value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ value32 |= BCM43xx_SBF_MODE_NOTADHOC;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32);
+
+ value32 = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ value32 |= 0x100000;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value32);
+
+ if (bcm43xx_using_pio(bcm)) {
+ bcm43xx_write32(bcm, 0x0210, 0x00000100);
+ bcm43xx_write32(bcm, 0x0230, 0x00000100);
+ bcm43xx_write32(bcm, 0x0250, 0x00000100);
+ bcm43xx_write32(bcm, 0x0270, 0x00000100);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0034, 0x0000);
+ }
+
+ /* Probe Response Timeout value */
+ /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0074, 0x0000);
+
+ /* Initially set the wireless operation mode. */
+ bcm43xx_set_iwmode(bcm, bcm->ieee->iw_mode);
+
+ if (bcm->current_core->rev < 3) {
+ bcm43xx_write16(bcm, 0x060E, 0x0000);
+ bcm43xx_write16(bcm, 0x0610, 0x8000);
+ bcm43xx_write16(bcm, 0x0604, 0x0000);
+ bcm43xx_write16(bcm, 0x0606, 0x0200);
+ } else {
+ bcm43xx_write32(bcm, 0x0188, 0x80000000);
+ bcm43xx_write32(bcm, 0x018C, 0x02000000);
+ }
+ bcm43xx_write32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON, 0x00004000);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA1_IRQ_MASK, 0x0001DC00);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA3_IRQ_MASK, 0x0000DC00);
+ bcm43xx_write32(bcm, BCM43xx_MMIO_DMA4_IRQ_MASK, 0x0001DC00);
+
+ value32 = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ value32 |= 0x00100000;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, value32);
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_POWERUP_DELAY, bcm43xx_pctl_powerup_delay(bcm));
+
+ assert(err == 0);
+ dprintk(KERN_INFO PFX "Chip initialized\n");
+out:
+ return err;
+
+err_radio_off:
+ bcm43xx_radio_turn_off(bcm);
+err_gpio_cleanup:
+ bcm43xx_gpio_cleanup(bcm);
+err_free_irq:
+ free_irq(bcm->irq, bcm);
+err_release_fw:
+ bcm43xx_release_firmware(bcm, 1);
+ goto out;
+}
+
+/* Validate chip access
+ * http://bcm-specs.sipsolutions.net/ValidateChipAccess */
+static int bcm43xx_validate_chip(struct bcm43xx_private *bcm)
+{
+ u32 value;
+ u32 shm_backup;
+
+ shm_backup = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000);
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, 0xAA5555AA);
+ if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000) != 0xAA5555AA)
+ goto error;
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, 0x55AAAA55);
+ if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0000) != 0x55AAAA55)
+ goto error;
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, 0x0000, shm_backup);
+
+ value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ if ((value | 0x80000000) != 0x80000400)
+ goto error;
+
+ value = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
+ if (value != 0x00000000)
+ goto error;
+
+ return 0;
+error:
+ printk(KERN_ERR PFX "Failed to validate the chipaccess\n");
+ return -ENODEV;
+}
+
+static void bcm43xx_init_struct_phyinfo(struct bcm43xx_phyinfo *phy)
+{
+ /* Initialize a "phyinfo" structure. The structure is already
+ * zeroed out.
+ */
+ phy->antenna_diversity = 0xFFFF;
+ phy->savedpctlreg = 0xFFFF;
+ phy->minlowsig[0] = 0xFFFF;
+ phy->minlowsig[1] = 0xFFFF;
+ spin_lock_init(&phy->lock);
+}
+
+static void bcm43xx_init_struct_radioinfo(struct bcm43xx_radioinfo *radio)
+{
+ /* Initialize a "radioinfo" structure. The structure is already
+ * zeroed out.
+ */
+ radio->interfmode = BCM43xx_RADIO_INTERFMODE_NONE;
+ radio->channel = 0xFF;
+ radio->initial_channel = 0xFF;
+ radio->lofcal = 0xFFFF;
+ radio->initval = 0xFFFF;
+ radio->nrssi[0] = -1000;
+ radio->nrssi[1] = -1000;
+}
+
+static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
+{
+ int err, i;
+ int current_core;
+ u32 core_vendor, core_id, core_rev;
+ u32 sb_id_hi, chip_id_32 = 0;
+ u16 pci_device, chip_id_16;
+ u8 core_count;
+
+ memset(&bcm->core_chipcommon, 0, sizeof(struct bcm43xx_coreinfo));
+ memset(&bcm->core_pci, 0, sizeof(struct bcm43xx_coreinfo));
+ memset(&bcm->core_80211, 0, sizeof(struct bcm43xx_coreinfo)
+ * BCM43xx_MAX_80211_CORES);
+ memset(&bcm->core_80211_ext, 0, sizeof(struct bcm43xx_coreinfo_80211)
+ * BCM43xx_MAX_80211_CORES);
+ bcm->current_80211_core_idx = -1;
+ bcm->nr_80211_available = 0;
+ bcm->current_core = NULL;
+ bcm->active_80211_core = NULL;
+
+ /* map core 0 */
+ err = _switch_core(bcm, 0);
+ if (err)
+ goto out;
+
+ /* fetch sb_id_hi from core information registers */
+ sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
+
+ core_id = (sb_id_hi & 0xFFF0) >> 4;
+ core_rev = (sb_id_hi & 0xF);
+ core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
+
+ /* if present, chipcommon is always core 0; read the chipid from it */
+ if (core_id == BCM43xx_COREID_CHIPCOMMON) {
+ chip_id_32 = bcm43xx_read32(bcm, 0);
+ chip_id_16 = chip_id_32 & 0xFFFF;
+ bcm->core_chipcommon.available = 1;
+ bcm->core_chipcommon.id = core_id;
+ bcm->core_chipcommon.rev = core_rev;
+ bcm->core_chipcommon.index = 0;
+ /* While we are at it, also read the capabilities. */
+ bcm->chipcommon_capabilities = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_CAPABILITIES);
+ } else {
+ /* without a chipCommon, use a hard coded table. */
+ pci_device = bcm->pci_dev->device;
+ if (pci_device == 0x4301)
+ chip_id_16 = 0x4301;
+ else if ((pci_device >= 0x4305) && (pci_device <= 0x4307))
+ chip_id_16 = 0x4307;
+ else if ((pci_device >= 0x4402) && (pci_device <= 0x4403))
+ chip_id_16 = 0x4402;
+ else if ((pci_device >= 0x4610) && (pci_device <= 0x4615))
+ chip_id_16 = 0x4610;
+ else if ((pci_device >= 0x4710) && (pci_device <= 0x4715))
+ chip_id_16 = 0x4710;
+#ifdef CONFIG_BCM947XX
+ else if ((pci_device >= 0x4320) && (pci_device <= 0x4325))
+ chip_id_16 = 0x4309;
+#endif
+ else {
+ printk(KERN_ERR PFX "Could not determine Chip ID\n");
+ return -ENODEV;
+ }
+ }
+
+ /* ChipCommon with Core Rev >=4 encodes number of cores,
+ * otherwise consult hardcoded table */
+ if ((core_id == BCM43xx_COREID_CHIPCOMMON) && (core_rev >= 4)) {
+ core_count = (chip_id_32 & 0x0F000000) >> 24;
+ } else {
+ switch (chip_id_16) {
+ case 0x4610:
+ case 0x4704:
+ case 0x4710:
+ core_count = 9;
+ break;
+ case 0x4310:
+ core_count = 8;
+ break;
+ case 0x5365:
+ core_count = 7;
+ break;
+ case 0x4306:
+ core_count = 6;
+ break;
+ case 0x4301:
+ case 0x4307:
+ core_count = 5;
+ break;
+ case 0x4402:
+ core_count = 3;
+ break;
+ default:
+ /* SOL if we get here */
+ assert(0);
+ core_count = 1;
+ }
+ }
+
+ bcm->chip_id = chip_id_16;
+ bcm->chip_rev = (chip_id_32 & 0x000F0000) >> 16;
+ bcm->chip_package = (chip_id_32 & 0x00F00000) >> 20;
+
+ dprintk(KERN_INFO PFX "Chip ID 0x%x, rev 0x%x\n",
+ bcm->chip_id, bcm->chip_rev);
+ dprintk(KERN_INFO PFX "Number of cores: %d\n", core_count);
+ if (bcm->core_chipcommon.available) {
+ dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n",
+ core_id, core_rev, core_vendor,
+ bcm43xx_core_enabled(bcm) ? "enabled" : "disabled");
+ }
+
+ if (bcm->core_chipcommon.available)
+ current_core = 1;
+ else
+ current_core = 0;
+ for ( ; current_core < core_count; current_core++) {
+ struct bcm43xx_coreinfo *core;
+ struct bcm43xx_coreinfo_80211 *ext_80211;
+
+ err = _switch_core(bcm, current_core);
+ if (err)
+ goto out;
+ /* Gather information */
+ /* fetch sb_id_hi from core information registers */
+ sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
+
+ /* extract core_id, core_rev, core_vendor */
+ core_id = (sb_id_hi & 0xFFF0) >> 4;
+ core_rev = (sb_id_hi & 0xF);
+ core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
+
+ dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n",
+ current_core, core_id, core_rev, core_vendor,
+ bcm43xx_core_enabled(bcm) ? "enabled" : "disabled" );
+
+ core = NULL;
+ switch (core_id) {
+ case BCM43xx_COREID_PCI:
+ core = &bcm->core_pci;
+ if (core->available) {
+ printk(KERN_WARNING PFX "Multiple PCI cores found.\n");
+ continue;
+ }
+ break;
+ case BCM43xx_COREID_80211:
+ for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
+ core = &(bcm->core_80211[i]);
+ ext_80211 = &(bcm->core_80211_ext[i]);
+ if (!core->available)
+ break;
+ core = NULL;
+ }
+ if (!core) {
+ printk(KERN_WARNING PFX "More than %d cores of type 802.11 found.\n",
+ BCM43xx_MAX_80211_CORES);
+ continue;
+ }
+ if (i != 0) {
+ /* More than one 80211 core is only supported
+ * by special chips.
+ * There are chips with two 80211 cores, but with
+ * dangling pins on the second core. Be careful
+ * and ignore these cores here.
+ */
+ if (bcm->pci_dev->device != 0x4324) {
+ dprintk(KERN_INFO PFX "Ignoring additional 802.11 core.\n");
+ continue;
+ }
+ }
+ switch (core_rev) {
+ case 2:
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ case 9:
+ break;
+ default:
+ printk(KERN_ERR PFX "Error: Unsupported 80211 core revision %u\n",
+ core_rev);
+ err = -ENODEV;
+ goto out;
+ }
+ bcm->nr_80211_available++;
+ bcm43xx_init_struct_phyinfo(&ext_80211->phy);
+ bcm43xx_init_struct_radioinfo(&ext_80211->radio);
+ break;
+ case BCM43xx_COREID_CHIPCOMMON:
+ printk(KERN_WARNING PFX "Multiple CHIPCOMMON cores found.\n");
+ break;
+ }
+ if (core) {
+ core->available = 1;
+ core->id = core_id;
+ core->rev = core_rev;
+ core->index = current_core;
+ }
+ }
+
+ if (!bcm->core_80211[0].available) {
+ printk(KERN_ERR PFX "Error: No 80211 core found!\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ err = bcm43xx_switch_core(bcm, &bcm->core_80211[0]);
+
+ assert(err == 0);
+out:
+ return err;
+}
+
+static void bcm43xx_gen_bssid(struct bcm43xx_private *bcm)
+{
+ const u8 *mac = (const u8*)(bcm->net_dev->dev_addr);
+ u8 *bssid = bcm->ieee->bssid;
+
+ switch (bcm->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ random_ether_addr(bssid);
+ break;
+ case IW_MODE_MASTER:
+ case IW_MODE_INFRA:
+ case IW_MODE_REPEAT:
+ case IW_MODE_SECOND:
+ case IW_MODE_MONITOR:
+ memcpy(bssid, mac, ETH_ALEN);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+static void bcm43xx_rate_memory_write(struct bcm43xx_private *bcm,
+ u16 rate,
+ int is_ofdm)
+{
+ u16 offset;
+
+ if (is_ofdm) {
+ offset = 0x480;
+ offset += (bcm43xx_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
+ }
+ else {
+ offset = 0x4C0;
+ offset += (bcm43xx_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
+ }
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, offset + 0x20,
+ bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, offset));
+}
+
+static void bcm43xx_rate_memory_init(struct bcm43xx_private *bcm)
+{
+ switch (bcm43xx_current_phy(bcm)->type) {
+ case BCM43xx_PHYTYPE_A:
+ case BCM43xx_PHYTYPE_G:
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_6MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_12MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_18MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_24MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_36MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_48MB, 1);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_OFDM_RATE_54MB, 1);
+ case BCM43xx_PHYTYPE_B:
+ bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_1MB, 0);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_2MB, 0);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_5MB, 0);
+ bcm43xx_rate_memory_write(bcm, IEEE80211_CCK_RATE_11MB, 0);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+static void bcm43xx_wireless_core_cleanup(struct bcm43xx_private *bcm)
+{
+ bcm43xx_chip_cleanup(bcm);
+ bcm43xx_pio_free(bcm);
+ bcm43xx_dma_free(bcm);
+
+ bcm->current_core->initialized = 0;
+}
+
+/* http://bcm-specs.sipsolutions.net/80211Init */
+static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u32 ucodeflags;
+ int err;
+ u32 sbimconfiglow;
+ u8 limit;
+
+ if (bcm->chip_rev < 5) {
+ sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
+ sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
+ sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
+ if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
+ sbimconfiglow |= 0x32;
+ else if (bcm->bustype == BCM43xx_BUSTYPE_SB)
+ sbimconfiglow |= 0x53;
+ else
+ assert(0);
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
+ }
+
+ bcm43xx_phy_calibrate(bcm);
+ err = bcm43xx_chip_init(bcm);
+ if (err)
+ goto out;
+
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0016, bcm->current_core->rev);
+ ucodeflags = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, BCM43xx_UCODEFLAGS_OFFSET);
+
+ if (0 /*FIXME: which condition has to be used here? */)
+ ucodeflags |= 0x00000010;
+
+ /* HW decryption needs to be set now */
+ ucodeflags |= 0x40000000;
+
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ ucodeflags |= BCM43xx_UCODEFLAG_UNKBGPHY;
+ if (phy->rev == 1)
+ ucodeflags |= BCM43xx_UCODEFLAG_UNKGPHY;
+ if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
+ ucodeflags |= BCM43xx_UCODEFLAG_UNKPACTRL;
+ } else if (phy->type == BCM43xx_PHYTYPE_B) {
+ ucodeflags |= BCM43xx_UCODEFLAG_UNKBGPHY;
+ if (phy->rev >= 2 && radio->version == 0x2050)
+ ucodeflags &= ~BCM43xx_UCODEFLAG_UNKGPHY;
+ }
+
+ if (ucodeflags != bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET)) {
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET, ucodeflags);
+ }
+
+ /* Short/Long Retry Limit.
+ * The retry-limit is a 4-bit counter. Enforce this to avoid overflowing
+ * the chip-internal counter.
+ */
+ limit = limit_value(modparam_short_retry, 0, 0xF);
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0006, limit);
+ limit = limit_value(modparam_long_retry, 0, 0xF);
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0007, limit);
+
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0044, 3);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0046, 2);
+
+ bcm43xx_rate_memory_init(bcm);
+
+ /* Minimum Contention Window */
+ if (phy->type == BCM43xx_PHYTYPE_B)
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0003, 0x0000001f);
+ else
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0003, 0x0000000f);
+ /* Maximum Contention Window */
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0004, 0x000003ff);
+
+ bcm43xx_gen_bssid(bcm);
+ bcm43xx_write_mac_bssid_templates(bcm);
+
+ if (bcm->current_core->rev >= 5)
+ bcm43xx_write16(bcm, 0x043C, 0x000C);
+
+ if (bcm43xx_using_pio(bcm))
+ err = bcm43xx_pio_init(bcm);
+ else
+ err = bcm43xx_dma_init(bcm);
+ if (err)
+ goto err_chip_cleanup;
+ bcm43xx_write16(bcm, 0x0612, 0x0050);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0416, 0x0050);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0414, 0x01F4);
+
+ bcm43xx_mac_enable(bcm);
+ bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
+
+ bcm->current_core->initialized = 1;
+out:
+ return err;
+
+err_chip_cleanup:
+ bcm43xx_chip_cleanup(bcm);
+ goto out;
+}
+
+static int bcm43xx_chipset_attach(struct bcm43xx_private *bcm)
+{
+ int err;
+ u16 pci_status;
+
+ err = bcm43xx_pctl_set_crystal(bcm, 1);
+ if (err)
+ goto out;
+ bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status);
+ bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT);
+
+out:
+ return err;
+}
+
+static void bcm43xx_chipset_detach(struct bcm43xx_private *bcm)
+{
+ bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW);
+ bcm43xx_pctl_set_crystal(bcm, 0);
+}
+
+static void bcm43xx_pcicore_broadcast_value(struct bcm43xx_private *bcm,
+ u32 address,
+ u32 data)
+{
+ bcm43xx_write32(bcm, BCM43xx_PCICORE_BCAST_ADDR, address);
+ bcm43xx_write32(bcm, BCM43xx_PCICORE_BCAST_DATA, data);
+}
+
+static int bcm43xx_pcicore_commit_settings(struct bcm43xx_private *bcm)
+{
+ int err;
+ struct bcm43xx_coreinfo *old_core;
+
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_pci);
+ if (err)
+ goto out;
+
+ bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+
+ bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+out:
+ return err;
+}
+
+/* Make an I/O Core usable. "core_mask" is the bitmask of the cores to enable.
+ * To enable core 0, pass a core_mask of 1<<0
+ */
+static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm,
+ u32 core_mask)
+{
+ u32 backplane_flag_nr;
+ u32 value;
+ struct bcm43xx_coreinfo *old_core;
+ int err = 0;
+
+ value = bcm43xx_read32(bcm, BCM43xx_CIR_SBTPSFLAG);
+ backplane_flag_nr = value & BCM43xx_BACKPLANE_FLAG_NR_MASK;
+
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_pci);
+ if (err)
+ goto out;
+
+ if (bcm->core_pci.rev < 6) {
+ value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
+ value |= (1 << backplane_flag_nr);
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBINTVEC, value);
+ } else {
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCICFG_ICR, &value);
+ if (err) {
+ printk(KERN_ERR PFX "Error: ICR setup failure!\n");
+ goto out_switch_back;
+ }
+ value |= core_mask << 8;
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_ICR, value);
+ if (err) {
+ printk(KERN_ERR PFX "Error: ICR setup failure!\n");
+ goto out_switch_back;
+ }
+ }
+
+ value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
+ value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST;
+ bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
+
+ if (bcm->core_pci.rev < 5) {
+ value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
+ value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT)
+ & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
+ value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT)
+ & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value);
+ err = bcm43xx_pcicore_commit_settings(bcm);
+ assert(err == 0);
+ }
+
+out_switch_back:
+ err = bcm43xx_switch_core(bcm, old_core);
+out:
+ return err;
+}
+
+static void bcm43xx_softmac_init(struct bcm43xx_private *bcm)
+{
+ ieee80211softmac_start(bcm->net_dev);
+}
+
+static void bcm43xx_periodic_every120sec(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ if (phy->type != BCM43xx_PHYTYPE_G || phy->rev < 2)
+ return;
+
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_phy_lo_g_measure(bcm);
+ bcm43xx_mac_enable(bcm);
+}
+
+static void bcm43xx_periodic_every60sec(struct bcm43xx_private *bcm)
+{
+ bcm43xx_phy_lo_mark_all_unused(bcm);
+ if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) {
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_calc_nrssi_slope(bcm);
+ bcm43xx_mac_enable(bcm);
+ }
+}
+
+static void bcm43xx_periodic_every30sec(struct bcm43xx_private *bcm)
+{
+ /* Update device statistics. */
+ bcm43xx_calculate_link_quality(bcm);
+}
+
+static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ //TODO: update_aci_moving_average
+ if (radio->aci_enable && radio->aci_wlan_automatic) {
+ bcm43xx_mac_suspend(bcm);
+ if (!radio->aci_enable && 1 /*TODO: not scanning? */) {
+ if (0 /*TODO: bunch of conditions*/) {
+ bcm43xx_radio_set_interference_mitigation(bcm,
+ BCM43xx_RADIO_INTERFMODE_MANUALWLAN);
+ }
+ } else if (1/*TODO*/) {
+ /*
+ if ((aci_average > 1000) && !(bcm43xx_radio_aci_scan(bcm))) {
+ bcm43xx_radio_set_interference_mitigation(bcm,
+ BCM43xx_RADIO_INTERFMODE_NONE);
+ }
+ */
+ }
+ bcm43xx_mac_enable(bcm);
+ } else if (radio->interfmode == BCM43xx_RADIO_INTERFMODE_NONWLAN &&
+ phy->rev == 1) {
+ //TODO: implement rev1 workaround
+ }
+ }
+ bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
+ //TODO for APHY (temperature?)
+}
+
+static void bcm43xx_periodic_task_handler(unsigned long d)
+{
+ struct bcm43xx_private *bcm = (struct bcm43xx_private *)d;
+ unsigned long flags;
+ unsigned int state;
+
+ bcm43xx_lock_mmio(bcm, flags);
+
+ assert(bcm->initialized);
+ state = bcm->periodic_state;
+ if (state % 8 == 0)
+ bcm43xx_periodic_every120sec(bcm);
+ if (state % 4 == 0)
+ bcm43xx_periodic_every60sec(bcm);
+ if (state % 2 == 0)
+ bcm43xx_periodic_every30sec(bcm);
+ bcm43xx_periodic_every15sec(bcm);
+ bcm->periodic_state = state + 1;
+
+ mod_timer(&bcm->periodic_tasks, jiffies + (HZ * 15));
+
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+static void bcm43xx_periodic_tasks_delete(struct bcm43xx_private *bcm)
+{
+ del_timer_sync(&bcm->periodic_tasks);
+}
+
+static void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm)
+{
+ struct timer_list *timer = &(bcm->periodic_tasks);
+
+ assert(bcm->initialized);
+ setup_timer(timer,
+ bcm43xx_periodic_task_handler,
+ (unsigned long)bcm);
+ timer->expires = jiffies;
+ add_timer(timer);
+}
+
+static void bcm43xx_security_init(struct bcm43xx_private *bcm)
+{
+ bcm->security_offset = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED,
+ 0x0056) * 2;
+ bcm43xx_clear_keys(bcm);
+}
+
+/* This is the opposite of bcm43xx_init_board() */
+static void bcm43xx_free_board(struct bcm43xx_private *bcm)
+{
+ int i, err;
+ unsigned long flags;
+
+ bcm43xx_sysfs_unregister(bcm);
+
+ bcm43xx_periodic_tasks_delete(bcm);
+
+ bcm43xx_lock(bcm, flags);
+ bcm->initialized = 0;
+ bcm->shutting_down = 1;
+ bcm43xx_unlock(bcm, flags);
+
+ for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
+ if (!bcm->core_80211[i].available)
+ continue;
+ if (!bcm->core_80211[i].initialized)
+ continue;
+
+ err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]);
+ assert(err == 0);
+ bcm43xx_wireless_core_cleanup(bcm);
+ }
+
+ bcm43xx_pctl_set_crystal(bcm, 0);
+
+ bcm43xx_lock(bcm, flags);
+ bcm->shutting_down = 0;
+ bcm43xx_unlock(bcm, flags);
+}
+
+static int bcm43xx_init_board(struct bcm43xx_private *bcm)
+{
+ int i, err;
+ int connect_phy;
+ unsigned long flags;
+
+ might_sleep();
+
+ bcm43xx_lock(bcm, flags);
+ bcm->initialized = 0;
+ bcm->shutting_down = 0;
+ bcm43xx_unlock(bcm, flags);
+
+ err = bcm43xx_pctl_set_crystal(bcm, 1);
+ if (err)
+ goto out;
+ err = bcm43xx_pctl_init(bcm);
+ if (err)
+ goto err_crystal_off;
+ err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_FAST);
+ if (err)
+ goto err_crystal_off;
+
+ tasklet_enable(&bcm->isr_tasklet);
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]);
+ assert(err != -ENODEV);
+ if (err)
+ goto err_80211_unwind;
+
+ /* Enable the selected wireless core.
+ * Connect PHY only on the first core.
+ */
+ if (!bcm43xx_core_enabled(bcm)) {
+ if (bcm->nr_80211_available == 1) {
+ connect_phy = bcm43xx_current_phy(bcm)->connected;
+ } else {
+ if (i == 0)
+ connect_phy = 1;
+ else
+ connect_phy = 0;
+ }
+ bcm43xx_wireless_core_reset(bcm, connect_phy);
+ }
+
+ if (i != 0)
+ bcm43xx_wireless_core_mark_inactive(bcm, &bcm->core_80211[0]);
+
+ err = bcm43xx_wireless_core_init(bcm);
+ if (err)
+ goto err_80211_unwind;
+
+ if (i != 0) {
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_radio_turn_off(bcm);
+ }
+ }
+ bcm->active_80211_core = &bcm->core_80211[0];
+ if (bcm->nr_80211_available >= 2) {
+ bcm43xx_switch_core(bcm, &bcm->core_80211[0]);
+ bcm43xx_mac_enable(bcm);
+ }
+ bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC);
+ bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr));
+ dprintk(KERN_INFO PFX "80211 cores initialized\n");
+ bcm43xx_security_init(bcm);
+ bcm43xx_softmac_init(bcm);
+
+ bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_DYNAMIC);
+
+ if (bcm43xx_current_radio(bcm)->initial_channel != 0xFF) {
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_radio_selectchannel(bcm, bcm43xx_current_radio(bcm)->initial_channel, 0);
+ bcm43xx_mac_enable(bcm);
+ }
+
+ /* Initialization of the board is done. Flag it as such. */
+ bcm43xx_lock(bcm, flags);
+ bcm->initialized = 1;
+ bcm43xx_unlock(bcm, flags);
+
+ bcm43xx_periodic_tasks_setup(bcm);
+ bcm43xx_sysfs_register(bcm);
+ //FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
+
+ assert(err == 0);
+out:
+ return err;
+
+err_80211_unwind:
+ tasklet_disable(&bcm->isr_tasklet);
+ /* unwind all 80211 initialization */
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ if (!bcm->core_80211[i].initialized)
+ continue;
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_wireless_core_cleanup(bcm);
+ }
+err_crystal_off:
+ bcm43xx_pctl_set_crystal(bcm, 0);
+ goto out;
+}
+
+static void bcm43xx_detach_board(struct bcm43xx_private *bcm)
+{
+ struct pci_dev *pci_dev = bcm->pci_dev;
+ int i;
+
+ bcm43xx_chipset_detach(bcm);
+ /* Do _not_ access the chip, after it is detached. */
+ iounmap(bcm->mmio_addr);
+
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+
+ /* Free allocated structures/fields */
+ for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
+ kfree(bcm->core_80211_ext[i].phy._lo_pairs);
+ if (bcm->core_80211_ext[i].phy.dyn_tssi_tbl)
+ kfree(bcm->core_80211_ext[i].phy.tssi2dbm);
+ }
+}
+
+static int bcm43xx_read_phyinfo(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 value;
+ u8 phy_version;
+ u8 phy_type;
+ u8 phy_rev;
+ int phy_rev_ok = 1;
+ void *p;
+
+ value = bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_VER);
+
+ phy_version = (value & 0xF000) >> 12;
+ phy_type = (value & 0x0F00) >> 8;
+ phy_rev = (value & 0x000F);
+
+ dprintk(KERN_INFO PFX "Detected PHY: Version: %x, Type %x, Revision %x\n",
+ phy_version, phy_type, phy_rev);
+
+ switch (phy_type) {
+ case BCM43xx_PHYTYPE_A:
+ if (phy_rev >= 4)
+ phy_rev_ok = 0;
+ /*FIXME: We need to switch the ieee->modulation, etc.. flags,
+ * if we switch 80211 cores after init is done.
+ * As we do not implement on the fly switching between
+ * wireless cores, I will leave this as a future task.
+ */
+ bcm->ieee->modulation = IEEE80211_OFDM_MODULATION;
+ bcm->ieee->mode = IEEE_A;
+ bcm->ieee->freq_band = IEEE80211_52GHZ_BAND |
+ IEEE80211_24GHZ_BAND;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 && phy_rev != 7)
+ phy_rev_ok = 0;
+ bcm->ieee->modulation = IEEE80211_CCK_MODULATION;
+ bcm->ieee->mode = IEEE_B;
+ bcm->ieee->freq_band = IEEE80211_24GHZ_BAND;
+ break;
+ case BCM43xx_PHYTYPE_G:
+ if (phy_rev > 7)
+ phy_rev_ok = 0;
+ bcm->ieee->modulation = IEEE80211_OFDM_MODULATION |
+ IEEE80211_CCK_MODULATION;
+ bcm->ieee->mode = IEEE_G;
+ bcm->ieee->freq_band = IEEE80211_24GHZ_BAND;
+ break;
+ default:
+ printk(KERN_ERR PFX "Error: Unknown PHY Type %x\n",
+ phy_type);
+ return -ENODEV;
+ };
+ if (!phy_rev_ok) {
+ printk(KERN_WARNING PFX "Invalid PHY Revision %x\n",
+ phy_rev);
+ }
+
+ phy->version = phy_version;
+ phy->type = phy_type;
+ phy->rev = phy_rev;
+ if ((phy_type == BCM43xx_PHYTYPE_B) || (phy_type == BCM43xx_PHYTYPE_G)) {
+ p = kzalloc(sizeof(struct bcm43xx_lopair) * BCM43xx_LO_COUNT,
+ GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+ phy->_lo_pairs = p;
+ }
+
+ return 0;
+}
+
+static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
+{
+ struct pci_dev *pci_dev = bcm->pci_dev;
+ struct net_device *net_dev = bcm->net_dev;
+ int err;
+ int i;
+ unsigned long mmio_start, mmio_flags, mmio_len;
+ u32 coremask;
+
+ err = pci_enable_device(pci_dev);
+ if (err) {
+ printk(KERN_ERR PFX "unable to wake up pci device (%i)\n", err);
+ goto out;
+ }
+ mmio_start = pci_resource_start(pci_dev, 0);
+ mmio_flags = pci_resource_flags(pci_dev, 0);
+ mmio_len = pci_resource_len(pci_dev, 0);
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ printk(KERN_ERR PFX
+ "%s, region #0 not an MMIO resource, aborting\n",
+ pci_name(pci_dev));
+ err = -ENODEV;
+ goto err_pci_disable;
+ }
+ err = pci_request_regions(pci_dev, KBUILD_MODNAME);
+ if (err) {
+ printk(KERN_ERR PFX
+ "could not access PCI resources (%i)\n", err);
+ goto err_pci_disable;
+ }
+ /* enable PCI bus-mastering */
+ pci_set_master(pci_dev);
+ bcm->mmio_addr = ioremap(mmio_start, mmio_len);
+ if (!bcm->mmio_addr) {
+ printk(KERN_ERR PFX "%s: cannot remap MMIO, aborting\n",
+ pci_name(pci_dev));
+ err = -EIO;
+ goto err_pci_release;
+ }
+ bcm->mmio_len = mmio_len;
+ net_dev->base_addr = (unsigned long)bcm->mmio_addr;
+
+ bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID,
+ &bcm->board_vendor);
+ bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID,
+ &bcm->board_type);
+ bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
+ &bcm->board_revision);
+
+ err = bcm43xx_chipset_attach(bcm);
+ if (err)
+ goto err_iounmap;
+ err = bcm43xx_pctl_init(bcm);
+ if (err)
+ goto err_chipset_detach;
+ err = bcm43xx_probe_cores(bcm);
+ if (err)
+ goto err_chipset_detach;
+
+ /* Attach all IO cores to the backplane. */
+ coremask = 0;
+ for (i = 0; i < bcm->nr_80211_available; i++)
+ coremask |= (1 << bcm->core_80211[i].index);
+ //FIXME: Also attach some non80211 cores?
+ err = bcm43xx_setup_backplane_pci_connection(bcm, coremask);
+ if (err) {
+ printk(KERN_ERR PFX "Backplane->PCI connection failed!\n");
+ goto err_chipset_detach;
+ }
+
+ err = bcm43xx_sprom_extract(bcm);
+ if (err)
+ goto err_chipset_detach;
+ err = bcm43xx_leds_init(bcm);
+ if (err)
+ goto err_chipset_detach;
+
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ err = bcm43xx_switch_core(bcm, &bcm->core_80211[i]);
+ assert(err != -ENODEV);
+ if (err)
+ goto err_80211_unwind;
+
+ /* Enable the selected wireless core.
+ * Connect PHY only on the first core.
+ */
+ bcm43xx_wireless_core_reset(bcm, (i == 0));
+
+ err = bcm43xx_read_phyinfo(bcm);
+ if (err && (i == 0))
+ goto err_80211_unwind;
+
+ err = bcm43xx_read_radioinfo(bcm);
+ if (err && (i == 0))
+ goto err_80211_unwind;
+
+ err = bcm43xx_validate_chip(bcm);
+ if (err && (i == 0))
+ goto err_80211_unwind;
+
+ bcm43xx_radio_turn_off(bcm);
+ err = bcm43xx_phy_init_tssi2dbm_table(bcm);
+ if (err)
+ goto err_80211_unwind;
+ bcm43xx_wireless_core_disable(bcm);
+ }
+ bcm43xx_pctl_set_crystal(bcm, 0);
+
+ /* Set the MAC address in the networking subsystem */
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
+ else
+ memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
+
+ bcm43xx_geo_init(bcm);
+
+ snprintf(bcm->nick, IW_ESSID_MAX_SIZE,
+ "Broadcom %04X", bcm->chip_id);
+
+ assert(err == 0);
+out:
+ return err;
+
+err_80211_unwind:
+ for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
+ kfree(bcm->core_80211_ext[i].phy._lo_pairs);
+ if (bcm->core_80211_ext[i].phy.dyn_tssi_tbl)
+ kfree(bcm->core_80211_ext[i].phy.tssi2dbm);
+ }
+err_chipset_detach:
+ bcm43xx_chipset_detach(bcm);
+err_iounmap:
+ iounmap(bcm->mmio_addr);
+err_pci_release:
+ pci_release_regions(pci_dev);
+err_pci_disable:
+ pci_disable_device(pci_dev);
+ goto out;
+}
+
+/* Do the Hardware IO operations to send the txb */
+static inline int bcm43xx_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb)
+{
+ int err = -ENODEV;
+
+ if (bcm43xx_using_pio(bcm))
+ err = bcm43xx_pio_tx(bcm, txb);
+ else
+ err = bcm43xx_dma_tx(bcm, txb);
+
+ return err;
+}
+
+static void bcm43xx_ieee80211_set_chan(struct net_device *net_dev,
+ u8 channel)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct bcm43xx_radioinfo *radio;
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (bcm->initialized) {
+ bcm43xx_mac_suspend(bcm);
+ bcm43xx_radio_selectchannel(bcm, channel, 0);
+ bcm43xx_mac_enable(bcm);
+ } else {
+ radio = bcm43xx_current_radio(bcm);
+ radio->initial_channel = channel;
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+/* set_security() callback in struct ieee80211_device */
+static void bcm43xx_ieee80211_set_security(struct net_device *net_dev,
+ struct ieee80211_security *sec)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct ieee80211_security *secinfo = &bcm->ieee->sec;
+ unsigned long flags;
+ int keyidx;
+
+ dprintk(KERN_INFO PFX "set security called\n");
+
+ bcm43xx_lock_mmio(bcm, flags);
+
+ for (keyidx = 0; keyidx<WEP_KEYS; keyidx++)
+ if (sec->flags & (1<<keyidx)) {
+ secinfo->encode_alg[keyidx] = sec->encode_alg[keyidx];
+ secinfo->key_sizes[keyidx] = sec->key_sizes[keyidx];
+ memcpy(secinfo->keys[keyidx], sec->keys[keyidx], SCM_KEY_LEN);
+ }
+
+ if (sec->flags & SEC_ACTIVE_KEY) {
+ secinfo->active_key = sec->active_key;
+ dprintk(KERN_INFO PFX " .active_key = %d\n", sec->active_key);
+ }
+ if (sec->flags & SEC_UNICAST_GROUP) {
+ secinfo->unicast_uses_group = sec->unicast_uses_group;
+ dprintk(KERN_INFO PFX " .unicast_uses_group = %d\n", sec->unicast_uses_group);
+ }
+ if (sec->flags & SEC_LEVEL) {
+ secinfo->level = sec->level;
+ dprintk(KERN_INFO PFX " .level = %d\n", sec->level);
+ }
+ if (sec->flags & SEC_ENABLED) {
+ secinfo->enabled = sec->enabled;
+ dprintk(KERN_INFO PFX " .enabled = %d\n", sec->enabled);
+ }
+ if (sec->flags & SEC_ENCRYPT) {
+ secinfo->encrypt = sec->encrypt;
+ dprintk(KERN_INFO PFX " .encrypt = %d\n", sec->encrypt);
+ }
+ if (bcm->initialized && !bcm->ieee->host_encrypt) {
+ if (secinfo->enabled) {
+ /* upload WEP keys to hardware */
+ char null_address[6] = { 0 };
+ u8 algorithm = 0;
+ for (keyidx = 0; keyidx<WEP_KEYS; keyidx++) {
+ if (!(sec->flags & (1<<keyidx)))
+ continue;
+ switch (sec->encode_alg[keyidx]) {
+ case SEC_ALG_NONE: algorithm = BCM43xx_SEC_ALGO_NONE; break;
+ case SEC_ALG_WEP:
+ algorithm = BCM43xx_SEC_ALGO_WEP;
+ if (secinfo->key_sizes[keyidx] == 13)
+ algorithm = BCM43xx_SEC_ALGO_WEP104;
+ break;
+ case SEC_ALG_TKIP:
+ FIXME();
+ algorithm = BCM43xx_SEC_ALGO_TKIP;
+ break;
+ case SEC_ALG_CCMP:
+ FIXME();
+ algorithm = BCM43xx_SEC_ALGO_AES;
+ break;
+ default:
+ assert(0);
+ break;
+ }
+ bcm43xx_key_write(bcm, keyidx, algorithm, sec->keys[keyidx], secinfo->key_sizes[keyidx], &null_address[0]);
+ bcm->key[keyidx].enabled = 1;
+ bcm->key[keyidx].algorithm = algorithm;
+ }
+ } else
+ bcm43xx_clear_keys(bcm);
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+/* hard_start_xmit() callback in struct ieee80211_device */
+static int bcm43xx_ieee80211_hard_start_xmit(struct ieee80211_txb *txb,
+ struct net_device *net_dev,
+ int pri)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err = -ENODEV;
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (likely(bcm->initialized))
+ err = bcm43xx_tx(bcm, txb);
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err;
+}
+
+static struct net_device_stats * bcm43xx_net_get_stats(struct net_device *net_dev)
+{
+ return &(bcm43xx_priv(net_dev)->ieee->stats);
+}
+
+static void bcm43xx_net_tx_timeout(struct net_device *net_dev)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ bcm43xx_controller_restart(bcm, "TX timeout");
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void bcm43xx_net_poll_controller(struct net_device *net_dev)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ bcm43xx_interrupt_handler(bcm->irq, bcm, NULL);
+ local_irq_restore(flags);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+static int bcm43xx_net_open(struct net_device *net_dev)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+
+ return bcm43xx_init_board(bcm);
+}
+
+static int bcm43xx_net_stop(struct net_device *net_dev)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+
+ ieee80211softmac_stop(net_dev);
+ bcm43xx_disable_interrupts_sync(bcm, NULL);
+ bcm43xx_free_board(bcm);
+
+ return 0;
+}
+
+static int bcm43xx_init_private(struct bcm43xx_private *bcm,
+ struct net_device *net_dev,
+ struct pci_dev *pci_dev)
+{
+ int err;
+
+ bcm->ieee = netdev_priv(net_dev);
+ bcm->softmac = ieee80211_priv(net_dev);
+ bcm->softmac->set_channel = bcm43xx_ieee80211_set_chan;
+
+ bcm->irq_savedstate = BCM43xx_IRQ_INITIAL;
+ bcm->pci_dev = pci_dev;
+ bcm->net_dev = net_dev;
+ bcm->bad_frames_preempt = modparam_bad_frames_preempt;
+ spin_lock_init(&bcm->_lock);
+ tasklet_init(&bcm->isr_tasklet,
+ (void (*)(unsigned long))bcm43xx_interrupt_tasklet,
+ (unsigned long)bcm);
+ tasklet_disable_nosync(&bcm->isr_tasklet);
+ if (modparam_pio) {
+ bcm->__using_pio = 1;
+ } else {
+ err = pci_set_dma_mask(pci_dev, DMA_30BIT_MASK);
+ err |= pci_set_consistent_dma_mask(pci_dev, DMA_30BIT_MASK);
+ if (err) {
+#ifdef CONFIG_BCM43XX_PIO
+ printk(KERN_WARNING PFX "DMA not supported. Falling back to PIO.\n");
+ bcm->__using_pio = 1;
+#else
+ printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
+ "Recompile the driver with PIO support, please.\n");
+ return -ENODEV;
+#endif /* CONFIG_BCM43XX_PIO */
+ }
+ }
+ bcm->rts_threshold = BCM43xx_DEFAULT_RTS_THRESHOLD;
+
+ /* default to sw encryption for now */
+ bcm->ieee->host_build_iv = 0;
+ bcm->ieee->host_encrypt = 1;
+ bcm->ieee->host_decrypt = 1;
+
+ bcm->ieee->iw_mode = BCM43xx_INITIAL_IWMODE;
+ bcm->ieee->tx_headroom = sizeof(struct bcm43xx_txhdr);
+ bcm->ieee->set_security = bcm43xx_ieee80211_set_security;
+ bcm->ieee->hard_start_xmit = bcm43xx_ieee80211_hard_start_xmit;
+
+ return 0;
+}
+
+static int __devinit bcm43xx_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *net_dev;
+ struct bcm43xx_private *bcm;
+ int err;
+
+#ifdef CONFIG_BCM947XX
+ if ((pdev->bus->number == 0) && (pdev->device != 0x0800))
+ return -ENODEV;
+#endif
+
+#ifdef DEBUG_SINGLE_DEVICE_ONLY
+ if (strcmp(pci_name(pdev), DEBUG_SINGLE_DEVICE_ONLY))
+ return -ENODEV;
+#endif
+
+ net_dev = alloc_ieee80211softmac(sizeof(*bcm));
+ if (!net_dev) {
+ printk(KERN_ERR PFX
+ "could not allocate ieee80211 device %s\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out;
+ }
+ /* initialize the net_device struct */
+ SET_MODULE_OWNER(net_dev);
+ SET_NETDEV_DEV(net_dev, &pdev->dev);
+
+ net_dev->open = bcm43xx_net_open;
+ net_dev->stop = bcm43xx_net_stop;
+ net_dev->get_stats = bcm43xx_net_get_stats;
+ net_dev->tx_timeout = bcm43xx_net_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ net_dev->poll_controller = bcm43xx_net_poll_controller;
+#endif
+ net_dev->wireless_handlers = &bcm43xx_wx_handlers_def;
+ net_dev->irq = pdev->irq;
+ SET_ETHTOOL_OPS(net_dev, &bcm43xx_ethtool_ops);
+
+ /* initialize the bcm43xx_private struct */
+ bcm = bcm43xx_priv(net_dev);
+ memset(bcm, 0, sizeof(*bcm));
+ err = bcm43xx_init_private(bcm, net_dev, pdev);
+ if (err)
+ goto err_free_netdev;
+
+ pci_set_drvdata(pdev, net_dev);
+
+ err = bcm43xx_attach_board(bcm);
+ if (err)
+ goto err_free_netdev;
+
+ err = register_netdev(net_dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register net device, "
+ "aborting.\n");
+ err = -ENOMEM;
+ goto err_detach_board;
+ }
+
+ bcm43xx_debugfs_add_device(bcm);
+
+ assert(err == 0);
+out:
+ return err;
+
+err_detach_board:
+ bcm43xx_detach_board(bcm);
+err_free_netdev:
+ free_ieee80211softmac(net_dev);
+ goto out;
+}
+
+static void __devexit bcm43xx_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *net_dev = pci_get_drvdata(pdev);
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+
+ bcm43xx_debugfs_remove_device(bcm);
+ unregister_netdev(net_dev);
+ bcm43xx_detach_board(bcm);
+ assert(bcm->ucode == NULL);
+ free_ieee80211softmac(net_dev);
+}
+
+/* Hard-reset the chip. Do not call this directly.
+ * Use bcm43xx_controller_restart()
+ */
+static void bcm43xx_chip_reset(void *_bcm)
+{
+ struct bcm43xx_private *bcm = _bcm;
+ struct net_device *net_dev = bcm->net_dev;
+ struct pci_dev *pci_dev = bcm->pci_dev;
+ int err;
+ int was_initialized = bcm->initialized;
+
+ netif_stop_queue(bcm->net_dev);
+ tasklet_disable(&bcm->isr_tasklet);
+
+ bcm->firmware_norelease = 1;
+ if (was_initialized)
+ bcm43xx_free_board(bcm);
+ bcm->firmware_norelease = 0;
+ bcm43xx_detach_board(bcm);
+ err = bcm43xx_init_private(bcm, net_dev, pci_dev);
+ if (err)
+ goto failure;
+ err = bcm43xx_attach_board(bcm);
+ if (err)
+ goto failure;
+ if (was_initialized) {
+ err = bcm43xx_init_board(bcm);
+ if (err)
+ goto failure;
+ }
+ netif_wake_queue(bcm->net_dev);
+ printk(KERN_INFO PFX "Controller restarted\n");
+
+ return;
+failure:
+ printk(KERN_ERR PFX "Controller restart failed\n");
+}
+
+/* Hard-reset the chip.
+ * This can be called from interrupt or process context.
+ * Make sure to _not_ re-enable device interrupts after this has been called.
+*/
+void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason)
+{
+ bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* dummy read */
+ printk(KERN_ERR PFX "Controller RESET (%s) ...\n", reason);
+ INIT_WORK(&bcm->restart_work, bcm43xx_chip_reset, bcm);
+ schedule_work(&bcm->restart_work);
+}
+
+#ifdef CONFIG_PM
+
+static int bcm43xx_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *net_dev = pci_get_drvdata(pdev);
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int try_to_shutdown = 0, err;
+
+ dprintk(KERN_INFO PFX "Suspending...\n");
+
+ bcm43xx_lock(bcm, flags);
+ bcm->was_initialized = bcm->initialized;
+ if (bcm->initialized)
+ try_to_shutdown = 1;
+ bcm43xx_unlock(bcm, flags);
+
+ netif_device_detach(net_dev);
+ if (try_to_shutdown) {
+ ieee80211softmac_stop(net_dev);
+ err = bcm43xx_disable_interrupts_sync(bcm, &bcm->irq_savedstate);
+ if (unlikely(err)) {
+ dprintk(KERN_ERR PFX "Suspend failed.\n");
+ return -EAGAIN;
+ }
+ bcm->firmware_norelease = 1;
+ bcm43xx_free_board(bcm);
+ bcm->firmware_norelease = 0;
+ }
+ bcm43xx_chipset_detach(bcm);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ dprintk(KERN_INFO PFX "Device suspended.\n");
+
+ return 0;
+}
+
+static int bcm43xx_resume(struct pci_dev *pdev)
+{
+ struct net_device *net_dev = pci_get_drvdata(pdev);
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err = 0;
+
+ dprintk(KERN_INFO PFX "Resuming...\n");
+
+ pci_set_power_state(pdev, 0);
+ pci_enable_device(pdev);
+ pci_restore_state(pdev);
+
+ bcm43xx_chipset_attach(bcm);
+ if (bcm->was_initialized) {
+ bcm->irq_savedstate = BCM43xx_IRQ_INITIAL;
+ err = bcm43xx_init_board(bcm);
+ }
+ if (err) {
+ printk(KERN_ERR PFX "Resume failed!\n");
+ return err;
+ }
+
+ netif_device_attach(net_dev);
+
+ /*FIXME: This should be handled by softmac instead. */
+ schedule_work(&bcm->softmac->associnfo.work);
+
+ dprintk(KERN_INFO PFX "Device resumed.\n");
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver bcm43xx_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bcm43xx_pci_tbl,
+ .probe = bcm43xx_init_one,
+ .remove = __devexit_p(bcm43xx_remove_one),
+#ifdef CONFIG_PM
+ .suspend = bcm43xx_suspend,
+ .resume = bcm43xx_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init bcm43xx_init(void)
+{
+ printk(KERN_INFO KBUILD_MODNAME " driver\n");
+ bcm43xx_debugfs_init();
+ return pci_register_driver(&bcm43xx_pci_driver);
+}
+
+static void __exit bcm43xx_exit(void)
+{
+ pci_unregister_driver(&bcm43xx_pci_driver);
+ bcm43xx_debugfs_exit();
+}
+
+module_init(bcm43xx_init)
+module_exit(bcm43xx_exit)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
new file mode 100644
index 0000000..eca79a3
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -0,0 +1,168 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#ifndef BCM43xx_MAIN_H_
+#define BCM43xx_MAIN_H_
+
+#include "bcm43xx.h"
+
+#ifdef CONFIG_BCM947XX
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static inline void e_aton(char *str, char *dest)
+{
+ int i = 0;
+ u16 *d = (u16 *) dest;
+
+ for (;;) {
+ dest[i++] = (char) simple_strtoul(str, NULL, 16);
+ str += 2;
+ if (!*str++ || i == 6)
+ break;
+ }
+ for (i = 0; i < 3; i++)
+ d[i] = cpu_to_be16(d[i]);
+}
+#endif
+
+#define P4D_BYT3S(magic, nr_bytes) u8 __p4dding##magic[nr_bytes]
+#define P4D_BYTES(line, nr_bytes) P4D_BYT3S(line, nr_bytes)
+/* Magic helper macro to pad structures. Ignore those above. It's magic. */
+#define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes))
+
+
+/* Lightweight function to convert a frequency (in Mhz) to a channel number. */
+static inline
+u8 bcm43xx_freq_to_channel_a(int freq)
+{
+ return ((freq - 5000) / 5);
+}
+static inline
+u8 bcm43xx_freq_to_channel_bg(int freq)
+{
+ u8 channel;
+
+ if (freq == 2484)
+ channel = 14;
+ else
+ channel = (freq - 2407) / 5;
+
+ return channel;
+}
+static inline
+u8 bcm43xx_freq_to_channel(struct bcm43xx_private *bcm,
+ int freq)
+{
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ return bcm43xx_freq_to_channel_a(freq);
+ return bcm43xx_freq_to_channel_bg(freq);
+}
+
+/* Lightweight function to convert a channel number to a frequency (in Mhz). */
+static inline
+int bcm43xx_channel_to_freq_a(u8 channel)
+{
+ return (5000 + (5 * channel));
+}
+static inline
+int bcm43xx_channel_to_freq_bg(u8 channel)
+{
+ int freq;
+
+ if (channel == 14)
+ freq = 2484;
+ else
+ freq = 2407 + (5 * channel);
+
+ return freq;
+}
+static inline
+int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm,
+ u8 channel)
+{
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ return bcm43xx_channel_to_freq_a(channel);
+ return bcm43xx_channel_to_freq_bg(channel);
+}
+
+/* Lightweight function to check if a channel number is valid.
+ * Note that this does _NOT_ check for geographical restrictions!
+ */
+static inline
+int bcm43xx_is_valid_channel_a(u8 channel)
+{
+ return (channel <= 200);
+}
+static inline
+int bcm43xx_is_valid_channel_bg(u8 channel)
+{
+ return (channel >= 1 && channel <= 14);
+}
+static inline
+int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
+ u8 channel)
+{
+ if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ return bcm43xx_is_valid_channel_a(channel);
+ return bcm43xx_is_valid_channel_bg(channel);
+}
+
+void bcm43xx_tsf_read(struct bcm43xx_private *bcm, u64 *tsf);
+void bcm43xx_tsf_write(struct bcm43xx_private *bcm, u64 tsf);
+
+void bcm43xx_set_iwmode(struct bcm43xx_private *bcm,
+ int iw_mode);
+
+u32 bcm43xx_shm_read32(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset);
+u16 bcm43xx_shm_read16(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset);
+void bcm43xx_shm_write32(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset,
+ u32 value);
+void bcm43xx_shm_write16(struct bcm43xx_private *bcm,
+ u16 routing, u16 offset,
+ u16 value);
+
+void bcm43xx_dummy_transmission(struct bcm43xx_private *bcm);
+
+int bcm43xx_switch_core(struct bcm43xx_private *bcm, struct bcm43xx_coreinfo *new_core);
+
+void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy);
+
+void bcm43xx_mac_suspend(struct bcm43xx_private *bcm);
+void bcm43xx_mac_enable(struct bcm43xx_private *bcm);
+
+void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason);
+
+int bcm43xx_sprom_read(struct bcm43xx_private *bcm, u16 *sprom);
+int bcm43xx_sprom_write(struct bcm43xx_private *bcm, const u16 *sprom);
+
+#endif /* BCM43xx_MAIN_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
new file mode 100644
index 0000000..0a66f43
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -0,0 +1,2345 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_phy.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_radio.h"
+#include "bcm43xx_ilt.h"
+#include "bcm43xx_power.h"
+
+
+static const s8 bcm43xx_tssi2dbm_b_table[] = {
+ 0x4D, 0x4C, 0x4B, 0x4A,
+ 0x4A, 0x49, 0x48, 0x47,
+ 0x47, 0x46, 0x45, 0x45,
+ 0x44, 0x43, 0x42, 0x42,
+ 0x41, 0x40, 0x3F, 0x3E,
+ 0x3D, 0x3C, 0x3B, 0x3A,
+ 0x39, 0x38, 0x37, 0x36,
+ 0x35, 0x34, 0x32, 0x31,
+ 0x30, 0x2F, 0x2D, 0x2C,
+ 0x2B, 0x29, 0x28, 0x26,
+ 0x25, 0x23, 0x21, 0x1F,
+ 0x1D, 0x1A, 0x17, 0x14,
+ 0x10, 0x0C, 0x06, 0x00,
+ -7, -7, -7, -7,
+ -7, -7, -7, -7,
+ -7, -7, -7, -7,
+};
+
+static const s8 bcm43xx_tssi2dbm_g_table[] = {
+ 77, 77, 77, 76,
+ 76, 76, 75, 75,
+ 74, 74, 73, 73,
+ 73, 72, 72, 71,
+ 71, 70, 70, 69,
+ 68, 68, 67, 67,
+ 66, 65, 65, 64,
+ 63, 63, 62, 61,
+ 60, 59, 58, 57,
+ 56, 55, 54, 53,
+ 52, 50, 49, 47,
+ 45, 43, 40, 37,
+ 33, 28, 22, 14,
+ 5, -7, -20, -20,
+ -20, -20, -20, -20,
+ -20, -20, -20, -20,
+};
+
+static void bcm43xx_phy_initg(struct bcm43xx_private *bcm);
+
+
+void bcm43xx_raw_phy_lock(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ assert(irqs_disabled());
+ if (bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD) == 0x00000000) {
+ phy->is_locked = 0;
+ return;
+ }
+ if (bcm->current_core->rev < 3) {
+ bcm43xx_mac_suspend(bcm);
+ spin_lock(&phy->lock);
+ } else {
+ if (bcm->ieee->iw_mode != IW_MODE_MASTER)
+ bcm43xx_power_saving_ctl_bits(bcm, -1, 1);
+ }
+ phy->is_locked = 1;
+}
+
+void bcm43xx_raw_phy_unlock(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ assert(irqs_disabled());
+ if (bcm->current_core->rev < 3) {
+ if (phy->is_locked) {
+ spin_unlock(&phy->lock);
+ bcm43xx_mac_enable(bcm);
+ }
+ } else {
+ if (bcm->ieee->iw_mode != IW_MODE_MASTER)
+ bcm43xx_power_saving_ctl_bits(bcm, -1, -1);
+ }
+ phy->is_locked = 0;
+}
+
+u16 bcm43xx_phy_read(struct bcm43xx_private *bcm, u16 offset)
+{
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_CONTROL, offset);
+ return bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_DATA);
+}
+
+void bcm43xx_phy_write(struct bcm43xx_private *bcm, u16 offset, u16 val)
+{
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_CONTROL, offset);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_DATA, val);
+}
+
+void bcm43xx_phy_calibrate(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ unsigned long flags;
+
+ bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); /* Dummy read. */
+ if (phy->calibrated)
+ return;
+ if (phy->type == BCM43xx_PHYTYPE_G && phy->rev == 1) {
+ /* We do not want to be preempted while calibrating
+ * the hardware.
+ */
+ local_irq_save(flags);
+
+ bcm43xx_wireless_core_reset(bcm, 0);
+ bcm43xx_phy_initg(bcm);
+ bcm43xx_wireless_core_reset(bcm, 1);
+
+ local_irq_restore(flags);
+ }
+ phy->calibrated = 1;
+}
+
+/* Connect the PHY
+ * http://bcm-specs.sipsolutions.net/SetPHY
+ */
+int bcm43xx_phy_connect(struct bcm43xx_private *bcm, int connect)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u32 flags;
+
+ if (bcm->current_core->rev < 5)
+ goto out;
+
+ flags = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATEHIGH);
+ if (connect) {
+ if (!(flags & 0x00010000))
+ return -ENODEV;
+ flags = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ flags |= (0x800 << 18);
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, flags);
+ } else {
+ if (!(flags & 0x00020000))
+ return -ENODEV;
+ flags = bcm43xx_read32(bcm, BCM43xx_CIR_SBTMSTATELOW);
+ flags &= ~(0x800 << 18);
+ bcm43xx_write32(bcm, BCM43xx_CIR_SBTMSTATELOW, flags);
+ }
+out:
+ phy->connected = connect;
+ if (connect)
+ dprintk(KERN_INFO PFX "PHY connected\n");
+ else
+ dprintk(KERN_INFO PFX "PHY disconnected\n");
+
+ return 0;
+}
+
+/* intialize B PHY power control
+ * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
+ */
+static void bcm43xx_phy_init_pctl(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 saved_batt = 0, saved_ratt = 0, saved_txctl1 = 0;
+ int must_reset_txpower = 0;
+
+ assert(phy->type != BCM43xx_PHYTYPE_A);
+ if ((bcm->board_vendor == PCI_VENDOR_ID_BROADCOM) &&
+ (bcm->board_type == 0x0416))
+ return;
+
+ bcm43xx_write16(bcm, 0x03E6, bcm43xx_read16(bcm, 0x03E6) & 0xFFDF);
+ bcm43xx_phy_write(bcm, 0x0028, 0x8018);
+
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (!phy->connected)
+ return;
+ bcm43xx_phy_write(bcm, 0x047A, 0xC111);
+ }
+ if (phy->savedpctlreg != 0xFFFF)
+ return;
+
+ if (phy->type == BCM43xx_PHYTYPE_B &&
+ phy->rev >= 2 &&
+ radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0076,
+ bcm43xx_radio_read16(bcm, 0x0076) | 0x0084);
+ } else {
+ saved_batt = radio->baseband_atten;
+ saved_ratt = radio->radio_atten;
+ saved_txctl1 = radio->txctl1;
+ if ((radio->revision >= 6) && (radio->revision <= 8)
+ && /*FIXME: incomplete specs for 5 < revision < 9 */ 0)
+ bcm43xx_radio_set_txpower_bg(bcm, 0xB, 0x1F, 0);
+ else
+ bcm43xx_radio_set_txpower_bg(bcm, 0xB, 9, 0);
+ must_reset_txpower = 1;
+ }
+ bcm43xx_dummy_transmission(bcm);
+
+ phy->savedpctlreg = bcm43xx_phy_read(bcm, BCM43xx_PHY_G_PCTL);
+
+ if (must_reset_txpower)
+ bcm43xx_radio_set_txpower_bg(bcm, saved_batt, saved_ratt, saved_txctl1);
+ else
+ bcm43xx_radio_write16(bcm, 0x0076, bcm43xx_radio_read16(bcm, 0x0076) & 0xFF7B);
+ bcm43xx_radio_clear_tssi(bcm);
+}
+
+static void bcm43xx_phy_agcsetup(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 offset = 0x0000;
+
+ if (phy->rev == 1)
+ offset = 0x4C00;
+
+ bcm43xx_ilt_write(bcm, offset, 0x00FE);
+ bcm43xx_ilt_write(bcm, offset + 1, 0x000D);
+ bcm43xx_ilt_write(bcm, offset + 2, 0x0013);
+ bcm43xx_ilt_write(bcm, offset + 3, 0x0019);
+
+ if (phy->rev == 1) {
+ bcm43xx_ilt_write(bcm, 0x1800, 0x2710);
+ bcm43xx_ilt_write(bcm, 0x1801, 0x9B83);
+ bcm43xx_ilt_write(bcm, 0x1802, 0x9B83);
+ bcm43xx_ilt_write(bcm, 0x1803, 0x0F8D);
+ bcm43xx_phy_write(bcm, 0x0455, 0x0004);
+ }
+
+ bcm43xx_phy_write(bcm, 0x04A5, (bcm43xx_phy_read(bcm, 0x04A5) & 0x00FF) | 0x5700);
+ bcm43xx_phy_write(bcm, 0x041A, (bcm43xx_phy_read(bcm, 0x041A) & 0xFF80) | 0x000F);
+ bcm43xx_phy_write(bcm, 0x041A, (bcm43xx_phy_read(bcm, 0x041A) & 0xC07F) | 0x2B80);
+ bcm43xx_phy_write(bcm, 0x048C, (bcm43xx_phy_read(bcm, 0x048C) & 0xF0FF) | 0x0300);
+
+ bcm43xx_radio_write16(bcm, 0x007A, bcm43xx_radio_read16(bcm, 0x007A) | 0x0008);
+
+ bcm43xx_phy_write(bcm, 0x04A0, (bcm43xx_phy_read(bcm, 0x04A0) & 0xFFF0) | 0x0008);
+ bcm43xx_phy_write(bcm, 0x04A1, (bcm43xx_phy_read(bcm, 0x04A1) & 0xF0FF) | 0x0600);
+ bcm43xx_phy_write(bcm, 0x04A2, (bcm43xx_phy_read(bcm, 0x04A2) & 0xF0FF) | 0x0700);
+ bcm43xx_phy_write(bcm, 0x04A0, (bcm43xx_phy_read(bcm, 0x04A0) & 0xF0FF) | 0x0100);
+
+ if (phy->rev == 1)
+ bcm43xx_phy_write(bcm, 0x04A2, (bcm43xx_phy_read(bcm, 0x04A2) & 0xFFF0) | 0x0007);
+
+ bcm43xx_phy_write(bcm, 0x0488, (bcm43xx_phy_read(bcm, 0x0488) & 0xFF00) | 0x001C);
+ bcm43xx_phy_write(bcm, 0x0488, (bcm43xx_phy_read(bcm, 0x0488) & 0xC0FF) | 0x0200);
+ bcm43xx_phy_write(bcm, 0x0496, (bcm43xx_phy_read(bcm, 0x0496) & 0xFF00) | 0x001C);
+ bcm43xx_phy_write(bcm, 0x0489, (bcm43xx_phy_read(bcm, 0x0489) & 0xFF00) | 0x0020);
+ bcm43xx_phy_write(bcm, 0x0489, (bcm43xx_phy_read(bcm, 0x0489) & 0xC0FF) | 0x0200);
+ bcm43xx_phy_write(bcm, 0x0482, (bcm43xx_phy_read(bcm, 0x0482) & 0xFF00) | 0x002E);
+ bcm43xx_phy_write(bcm, 0x0496, (bcm43xx_phy_read(bcm, 0x0496) & 0x00FF) | 0x1A00);
+ bcm43xx_phy_write(bcm, 0x0481, (bcm43xx_phy_read(bcm, 0x0481) & 0xFF00) | 0x0028);
+ bcm43xx_phy_write(bcm, 0x0481, (bcm43xx_phy_read(bcm, 0x0481) & 0x00FF) | 0x2C00);
+
+ if (phy->rev == 1) {
+ bcm43xx_phy_write(bcm, 0x0430, 0x092B);
+ bcm43xx_phy_write(bcm, 0x041B, (bcm43xx_phy_read(bcm, 0x041B) & 0xFFE1) | 0x0002);
+ } else {
+ bcm43xx_phy_write(bcm, 0x041B, bcm43xx_phy_read(bcm, 0x041B) & 0xFFE1);
+ bcm43xx_phy_write(bcm, 0x041F, 0x287A);
+ bcm43xx_phy_write(bcm, 0x0420, (bcm43xx_phy_read(bcm, 0x0420) & 0xFFF0) | 0x0004);
+ }
+
+ if (phy->rev > 2) {
+ bcm43xx_phy_write(bcm, 0x0422, 0x287A);
+ bcm43xx_phy_write(bcm, 0x0420, (bcm43xx_phy_read(bcm, 0x0420) & 0x0FFF) | 0x3000);
+ }
+
+ bcm43xx_phy_write(bcm, 0x04A8, (bcm43xx_phy_read(bcm, 0x04A8) & 0x8080) | 0x7874);
+ bcm43xx_phy_write(bcm, 0x048E, 0x1C00);
+
+ if (phy->rev == 1) {
+ bcm43xx_phy_write(bcm, 0x04AB, (bcm43xx_phy_read(bcm, 0x04AB) & 0xF0FF) | 0x0600);
+ bcm43xx_phy_write(bcm, 0x048B, 0x005E);
+ bcm43xx_phy_write(bcm, 0x048C, (bcm43xx_phy_read(bcm, 0x048C) & 0xFF00) | 0x001E);
+ bcm43xx_phy_write(bcm, 0x048D, 0x0002);
+ }
+
+ bcm43xx_ilt_write(bcm, offset + 0x0800, 0);
+ bcm43xx_ilt_write(bcm, offset + 0x0801, 7);
+ bcm43xx_ilt_write(bcm, offset + 0x0802, 16);
+ bcm43xx_ilt_write(bcm, offset + 0x0803, 28);
+}
+
+static void bcm43xx_phy_setupg(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 i;
+
+ assert(phy->type == BCM43xx_PHYTYPE_G);
+ if (phy->rev == 1) {
+ bcm43xx_phy_write(bcm, 0x0406, 0x4F19);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ (bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) & 0xFC3F) | 0x0340);
+ bcm43xx_phy_write(bcm, 0x042C, 0x005A);
+ bcm43xx_phy_write(bcm, 0x0427, 0x001A);
+
+ for (i = 0; i < BCM43xx_ILT_FINEFREQG_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x5800 + i, bcm43xx_ilt_finefreqg[i]);
+ for (i = 0; i < BCM43xx_ILT_NOISEG1_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1800 + i, bcm43xx_ilt_noiseg1[i]);
+ for (i = 0; i < BCM43xx_ILT_ROTOR_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x2000 + i, bcm43xx_ilt_rotor[i]);
+ } else {
+ /* nrssi values are signed 6-bit values. Not sure why we write 0x7654 here... */
+ bcm43xx_nrssi_hw_write(bcm, 0xBA98, (s16)0x7654);
+
+ if (phy->rev == 2) {
+ bcm43xx_phy_write(bcm, 0x04C0, 0x1861);
+ bcm43xx_phy_write(bcm, 0x04C1, 0x0271);
+ } else if (phy->rev > 2) {
+ bcm43xx_phy_write(bcm, 0x04C0, 0x0098);
+ bcm43xx_phy_write(bcm, 0x04C1, 0x0070);
+ bcm43xx_phy_write(bcm, 0x04C9, 0x0080);
+ }
+ bcm43xx_phy_write(bcm, 0x042B, bcm43xx_phy_read(bcm, 0x042B) | 0x800);
+
+ for (i = 0; i < 64; i++)
+ bcm43xx_ilt_write(bcm, 0x4000 + i, i);
+ for (i = 0; i < BCM43xx_ILT_NOISEG2_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1800 + i, bcm43xx_ilt_noiseg2[i]);
+ }
+
+ if (phy->rev <= 2)
+ for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg1[i]);
+ else if ((phy->rev == 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200))
+ for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg3[i]);
+ else
+ for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg2[i]);
+
+ if (phy->rev == 2)
+ for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]);
+ else if ((phy->rev > 2) && (phy->rev <= 7))
+ for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr2[i]);
+
+ if (phy->rev == 1) {
+ for (i = 0; i < BCM43xx_ILT_RETARD_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x2400 + i, bcm43xx_ilt_retard[i]);
+ for (i = 0; i < 4; i++) {
+ bcm43xx_ilt_write(bcm, 0x5404 + i, 0x0020);
+ bcm43xx_ilt_write(bcm, 0x5408 + i, 0x0020);
+ bcm43xx_ilt_write(bcm, 0x540C + i, 0x0020);
+ bcm43xx_ilt_write(bcm, 0x5410 + i, 0x0020);
+ }
+ bcm43xx_phy_agcsetup(bcm);
+
+ if ((bcm->board_vendor == PCI_VENDOR_ID_BROADCOM) &&
+ (bcm->board_type == 0x0416) &&
+ (bcm->board_revision == 0x0017))
+ return;
+
+ bcm43xx_ilt_write(bcm, 0x5001, 0x0002);
+ bcm43xx_ilt_write(bcm, 0x5002, 0x0001);
+ } else {
+ for (i = 0; i <= 0x2F; i++)
+ bcm43xx_ilt_write(bcm, 0x1000 + i, 0x0820);
+ bcm43xx_phy_agcsetup(bcm);
+ bcm43xx_phy_read(bcm, 0x0400); /* dummy read */
+ bcm43xx_phy_write(bcm, 0x0403, 0x1000);
+ bcm43xx_ilt_write(bcm, 0x3C02, 0x000F);
+ bcm43xx_ilt_write(bcm, 0x3C03, 0x0014);
+
+ if ((bcm->board_vendor == PCI_VENDOR_ID_BROADCOM) &&
+ (bcm->board_type == 0x0416) &&
+ (bcm->board_revision == 0x0017))
+ return;
+
+ bcm43xx_ilt_write(bcm, 0x0401, 0x0002);
+ bcm43xx_ilt_write(bcm, 0x0402, 0x0001);
+ }
+}
+
+/* Initialize the noisescaletable for APHY */
+static void bcm43xx_phy_init_noisescaletbl(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ int i;
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_CTRL, 0x1400);
+ for (i = 0; i < 12; i++) {
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x6767);
+ else
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x2323);
+ }
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x6700);
+ else
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x2300);
+ for (i = 0; i < 11; i++) {
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x6767);
+ else
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x2323);
+ }
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x0067);
+ else
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_ILT_A_DATA1, 0x0023);
+}
+
+static void bcm43xx_phy_setupa(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 i;
+
+ assert(phy->type == BCM43xx_PHYTYPE_A);
+ switch (phy->rev) {
+ case 2:
+ bcm43xx_phy_write(bcm, 0x008E, 0x3800);
+ bcm43xx_phy_write(bcm, 0x0035, 0x03FF);
+ bcm43xx_phy_write(bcm, 0x0036, 0x0400);
+
+ bcm43xx_ilt_write(bcm, 0x3807, 0x0051);
+
+ bcm43xx_phy_write(bcm, 0x001C, 0x0FF9);
+ bcm43xx_phy_write(bcm, 0x0020, bcm43xx_phy_read(bcm, 0x0020) & 0xFF0F);
+ bcm43xx_ilt_write(bcm, 0x3C0C, 0x07BF);
+ bcm43xx_radio_write16(bcm, 0x0002, 0x07BF);
+
+ bcm43xx_phy_write(bcm, 0x0024, 0x4680);
+ bcm43xx_phy_write(bcm, 0x0020, 0x0003);
+ bcm43xx_phy_write(bcm, 0x001D, 0x0F40);
+ bcm43xx_phy_write(bcm, 0x001F, 0x1C00);
+
+ bcm43xx_phy_write(bcm, 0x002A, (bcm43xx_phy_read(bcm, 0x002A) & 0x00FF) | 0x0400);
+ bcm43xx_phy_write(bcm, 0x002B, bcm43xx_phy_read(bcm, 0x002B) & 0xFBFF);
+ bcm43xx_phy_write(bcm, 0x008E, 0x58C1);
+
+ bcm43xx_ilt_write(bcm, 0x0803, 0x000F);
+ bcm43xx_ilt_write(bcm, 0x0804, 0x001F);
+ bcm43xx_ilt_write(bcm, 0x0805, 0x002A);
+ bcm43xx_ilt_write(bcm, 0x0805, 0x0030);
+ bcm43xx_ilt_write(bcm, 0x0807, 0x003A);
+
+ bcm43xx_ilt_write(bcm, 0x0000, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0001, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0002, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0003, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0004, 0x0015);
+ bcm43xx_ilt_write(bcm, 0x0005, 0x0015);
+ bcm43xx_ilt_write(bcm, 0x0006, 0x0019);
+
+ bcm43xx_ilt_write(bcm, 0x0404, 0x0003);
+ bcm43xx_ilt_write(bcm, 0x0405, 0x0003);
+ bcm43xx_ilt_write(bcm, 0x0406, 0x0007);
+
+ for (i = 0; i < 16; i++)
+ bcm43xx_ilt_write(bcm, 0x4000 + i, (0x8 + i) & 0x000F);
+
+ bcm43xx_ilt_write(bcm, 0x3003, 0x1044);
+ bcm43xx_ilt_write(bcm, 0x3004, 0x7201);
+ bcm43xx_ilt_write(bcm, 0x3006, 0x0040);
+ bcm43xx_ilt_write(bcm, 0x3001, (bcm43xx_ilt_read(bcm, 0x3001) & 0x0010) | 0x0008);
+
+ for (i = 0; i < BCM43xx_ILT_FINEFREQA_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x5800 + i, bcm43xx_ilt_finefreqa[i]);
+ for (i = 0; i < BCM43xx_ILT_NOISEA2_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1800 + i, bcm43xx_ilt_noisea2[i]);
+ for (i = 0; i < BCM43xx_ILT_ROTOR_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x2000 + i, bcm43xx_ilt_rotor[i]);
+ bcm43xx_phy_init_noisescaletbl(bcm);
+ for (i = 0; i < BCM43xx_ILT_RETARD_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x2400 + i, bcm43xx_ilt_retard[i]);
+ break;
+ case 3:
+ for (i = 0; i < 64; i++)
+ bcm43xx_ilt_write(bcm, 0x4000 + i, i);
+
+ bcm43xx_ilt_write(bcm, 0x3807, 0x0051);
+
+ bcm43xx_phy_write(bcm, 0x001C, 0x0FF9);
+ bcm43xx_phy_write(bcm, 0x0020, bcm43xx_phy_read(bcm, 0x0020) & 0xFF0F);
+ bcm43xx_radio_write16(bcm, 0x0002, 0x07BF);
+
+ bcm43xx_phy_write(bcm, 0x0024, 0x4680);
+ bcm43xx_phy_write(bcm, 0x0020, 0x0003);
+ bcm43xx_phy_write(bcm, 0x001D, 0x0F40);
+ bcm43xx_phy_write(bcm, 0x001F, 0x1C00);
+ bcm43xx_phy_write(bcm, 0x002A, (bcm43xx_phy_read(bcm, 0x002A) & 0x00FF) | 0x0400);
+
+ bcm43xx_ilt_write(bcm, 0x3001, (bcm43xx_ilt_read(bcm, 0x3001) & 0x0010) | 0x0008);
+ for (i = 0; i < BCM43xx_ILT_NOISEA3_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x1800 + i, bcm43xx_ilt_noisea3[i]);
+ bcm43xx_phy_init_noisescaletbl(bcm);
+ for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
+ bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]);
+
+ bcm43xx_phy_write(bcm, 0x0003, 0x1808);
+
+ bcm43xx_ilt_write(bcm, 0x0803, 0x000F);
+ bcm43xx_ilt_write(bcm, 0x0804, 0x001F);
+ bcm43xx_ilt_write(bcm, 0x0805, 0x002A);
+ bcm43xx_ilt_write(bcm, 0x0805, 0x0030);
+ bcm43xx_ilt_write(bcm, 0x0807, 0x003A);
+
+ bcm43xx_ilt_write(bcm, 0x0000, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0001, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0002, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0003, 0x0013);
+ bcm43xx_ilt_write(bcm, 0x0004, 0x0015);
+ bcm43xx_ilt_write(bcm, 0x0005, 0x0015);
+ bcm43xx_ilt_write(bcm, 0x0006, 0x0019);
+
+ bcm43xx_ilt_write(bcm, 0x0404, 0x0003);
+ bcm43xx_ilt_write(bcm, 0x0405, 0x0003);
+ bcm43xx_ilt_write(bcm, 0x0406, 0x0007);
+
+ bcm43xx_ilt_write(bcm, 0x3C02, 0x000F);
+ bcm43xx_ilt_write(bcm, 0x3C03, 0x0014);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+/* Initialize APHY. This is also called for the GPHY in some cases. */
+static void bcm43xx_phy_inita(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 tval;
+
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ bcm43xx_phy_setupa(bcm);
+ } else {
+ bcm43xx_phy_setupg(bcm);
+ if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
+ bcm43xx_phy_write(bcm, 0x046E, 0x03CF);
+ return;
+ }
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_A_CRS,
+ (bcm43xx_phy_read(bcm, BCM43xx_PHY_A_CRS) & 0xF83C) | 0x0340);
+ bcm43xx_phy_write(bcm, 0x0034, 0x0001);
+
+ TODO();//TODO: RSSI AGC
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_A_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_A_CRS) | (1 << 14));
+ bcm43xx_radio_init2060(bcm);
+
+ if ((bcm->board_vendor == PCI_VENDOR_ID_BROADCOM)
+ && ((bcm->board_type == 0x0416) || (bcm->board_type == 0x040A))) {
+ if (radio->lofcal == 0xFFFF) {
+ TODO();//TODO: LOF Cal
+ bcm43xx_radio_set_tx_iq(bcm);
+ } else
+ bcm43xx_radio_write16(bcm, 0x001E, radio->lofcal);
+ }
+
+ bcm43xx_phy_write(bcm, 0x007A, 0xF111);
+
+ if (phy->savedpctlreg == 0xFFFF) {
+ bcm43xx_radio_write16(bcm, 0x0019, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0017, 0x0020);
+
+ tval = bcm43xx_ilt_read(bcm, 0x3001);
+ if (phy->rev == 1) {
+ bcm43xx_ilt_write(bcm, 0x3001,
+ (bcm43xx_ilt_read(bcm, 0x3001) & 0xFF87)
+ | 0x0058);
+ } else {
+ bcm43xx_ilt_write(bcm, 0x3001,
+ (bcm43xx_ilt_read(bcm, 0x3001) & 0xFFC3)
+ | 0x002C);
+ }
+ bcm43xx_dummy_transmission(bcm);
+ phy->savedpctlreg = bcm43xx_phy_read(bcm, BCM43xx_PHY_A_PCTL);
+ bcm43xx_ilt_write(bcm, 0x3001, tval);
+
+ bcm43xx_radio_set_txpower_a(bcm, 0x0018);
+ }
+ bcm43xx_radio_clear_tssi(bcm);
+}
+
+static void bcm43xx_phy_initb2(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 offset, val;
+
+ bcm43xx_write16(bcm, 0x03EC, 0x3F22);
+ bcm43xx_phy_write(bcm, 0x0020, 0x301C);
+ bcm43xx_phy_write(bcm, 0x0026, 0x0000);
+ bcm43xx_phy_write(bcm, 0x0030, 0x00C6);
+ bcm43xx_phy_write(bcm, 0x0088, 0x3E00);
+ val = 0x3C3D;
+ for (offset = 0x0089; offset < 0x00A7; offset++) {
+ bcm43xx_phy_write(bcm, offset, val);
+ val -= 0x0202;
+ }
+ bcm43xx_phy_write(bcm, 0x03E4, 0x3000);
+ if (radio->channel == 0xFF)
+ bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 0);
+ else
+ bcm43xx_radio_selectchannel(bcm, radio->channel, 0);
+ if (radio->version != 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0075, 0x0080);
+ bcm43xx_radio_write16(bcm, 0x0079, 0x0081);
+ }
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0023);
+ if (radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0070);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x007B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x00B0);
+ bcm43xx_radio_write16(bcm, 0x007A, 0x000F);
+ bcm43xx_phy_write(bcm, 0x0038, 0x0677);
+ bcm43xx_radio_init2050(bcm);
+ }
+ bcm43xx_phy_write(bcm, 0x0014, 0x0080);
+ bcm43xx_phy_write(bcm, 0x0032, 0x00CA);
+ bcm43xx_phy_write(bcm, 0x0032, 0x00CC);
+ bcm43xx_phy_write(bcm, 0x0035, 0x07C2);
+ bcm43xx_phy_lo_b_measure(bcm);
+ bcm43xx_phy_write(bcm, 0x0026, 0xCC00);
+ if (radio->version != 0x2050)
+ bcm43xx_phy_write(bcm, 0x0026, 0xCE00);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, 0x1000);
+ bcm43xx_phy_write(bcm, 0x002A, 0x88A3);
+ if (radio->version != 0x2050)
+ bcm43xx_phy_write(bcm, 0x002A, 0x88C2);
+ bcm43xx_radio_set_txpower_bg(bcm, 0xFFFF, 0xFFFF, 0xFFFF);
+ bcm43xx_phy_init_pctl(bcm);
+}
+
+static void bcm43xx_phy_initb4(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 offset, val;
+
+ bcm43xx_write16(bcm, 0x03EC, 0x3F22);
+ bcm43xx_phy_write(bcm, 0x0020, 0x301C);
+ bcm43xx_phy_write(bcm, 0x0026, 0x0000);
+ bcm43xx_phy_write(bcm, 0x0030, 0x00C6);
+ bcm43xx_phy_write(bcm, 0x0088, 0x3E00);
+ val = 0x3C3D;
+ for (offset = 0x0089; offset < 0x00A7; offset++) {
+ bcm43xx_phy_write(bcm, offset, val);
+ val -= 0x0202;
+ }
+ bcm43xx_phy_write(bcm, 0x03E4, 0x3000);
+ if (radio->channel == 0xFF)
+ bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 0);
+ else
+ bcm43xx_radio_selectchannel(bcm, radio->channel, 0);
+ if (radio->version != 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0075, 0x0080);
+ bcm43xx_radio_write16(bcm, 0x0079, 0x0081);
+ }
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0023);
+ if (radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0070);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x007B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x00B0);
+ bcm43xx_radio_write16(bcm, 0x007A, 0x000F);
+ bcm43xx_phy_write(bcm, 0x0038, 0x0677);
+ bcm43xx_radio_init2050(bcm);
+ }
+ bcm43xx_phy_write(bcm, 0x0014, 0x0080);
+ bcm43xx_phy_write(bcm, 0x0032, 0x00CA);
+ if (radio->version == 0x2050)
+ bcm43xx_phy_write(bcm, 0x0032, 0x00E0);
+ bcm43xx_phy_write(bcm, 0x0035, 0x07C2);
+
+ bcm43xx_phy_lo_b_measure(bcm);
+
+ bcm43xx_phy_write(bcm, 0x0026, 0xCC00);
+ if (radio->version == 0x2050)
+ bcm43xx_phy_write(bcm, 0x0026, 0xCE00);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, 0x1100);
+ bcm43xx_phy_write(bcm, 0x002A, 0x88A3);
+ if (radio->version == 0x2050)
+ bcm43xx_phy_write(bcm, 0x002A, 0x88C2);
+ bcm43xx_radio_set_txpower_bg(bcm, 0xFFFF, 0xFFFF, 0xFFFF);
+ if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) {
+ bcm43xx_calc_nrssi_slope(bcm);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ }
+ bcm43xx_phy_init_pctl(bcm);
+}
+
+static void bcm43xx_phy_initb5(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 offset;
+
+ if (phy->version == 1 &&
+ radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A)
+ | 0x0050);
+ }
+ if ((bcm->board_vendor != PCI_VENDOR_ID_BROADCOM) &&
+ (bcm->board_type != 0x0416)) {
+ for (offset = 0x00A8 ; offset < 0x00C7; offset++) {
+ bcm43xx_phy_write(bcm, offset,
+ (bcm43xx_phy_read(bcm, offset) + 0x2020)
+ & 0x3F3F);
+ }
+ }
+ bcm43xx_phy_write(bcm, 0x0035,
+ (bcm43xx_phy_read(bcm, 0x0035) & 0xF0FF)
+ | 0x0700);
+ if (radio->version == 0x2050)
+ bcm43xx_phy_write(bcm, 0x0038, 0x0667);
+
+ if (phy->connected) {
+ if (radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A)
+ | 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0051,
+ bcm43xx_radio_read16(bcm, 0x0051)
+ | 0x0004);
+ }
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_RADIO, 0x0000);
+
+ bcm43xx_phy_write(bcm, 0x0802, bcm43xx_phy_read(bcm, 0x0802) | 0x0100);
+ bcm43xx_phy_write(bcm, 0x042B, bcm43xx_phy_read(bcm, 0x042B) | 0x2000);
+
+ bcm43xx_phy_write(bcm, 0x001C, 0x186A);
+
+ bcm43xx_phy_write(bcm, 0x0013, (bcm43xx_phy_read(bcm, 0x0013) & 0x00FF) | 0x1900);
+ bcm43xx_phy_write(bcm, 0x0035, (bcm43xx_phy_read(bcm, 0x0035) & 0xFFC0) | 0x0064);
+ bcm43xx_phy_write(bcm, 0x005D, (bcm43xx_phy_read(bcm, 0x005D) & 0xFF80) | 0x000A);
+ }
+
+ if (bcm->bad_frames_preempt) {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_RADIO_BITFIELD,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_RADIO_BITFIELD) | (1 << 11));
+ }
+
+ if (phy->version == 1 && radio->version == 0x2050) {
+ bcm43xx_phy_write(bcm, 0x0026, 0xCE00);
+ bcm43xx_phy_write(bcm, 0x0021, 0x3763);
+ bcm43xx_phy_write(bcm, 0x0022, 0x1BC3);
+ bcm43xx_phy_write(bcm, 0x0023, 0x06F9);
+ bcm43xx_phy_write(bcm, 0x0024, 0x037E);
+ } else
+ bcm43xx_phy_write(bcm, 0x0026, 0xCC00);
+ bcm43xx_phy_write(bcm, 0x0030, 0x00C6);
+ bcm43xx_write16(bcm, 0x03EC, 0x3F22);
+
+ if (phy->version == 1 && radio->version == 0x2050)
+ bcm43xx_phy_write(bcm, 0x0020, 0x3E1C);
+ else
+ bcm43xx_phy_write(bcm, 0x0020, 0x301C);
+
+ if (phy->version == 0)
+ bcm43xx_write16(bcm, 0x03E4, 0x3000);
+
+ /* Force to channel 7, even if not supported. */
+ bcm43xx_radio_selectchannel(bcm, 7, 0);
+
+ if (radio->version != 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0075, 0x0080);
+ bcm43xx_radio_write16(bcm, 0x0079, 0x0081);
+ }
+
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0023);
+
+ if (radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0070);
+ }
+
+ bcm43xx_radio_write16(bcm, 0x005B, 0x007B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x00B0);
+
+ bcm43xx_radio_write16(bcm, 0x007A, bcm43xx_radio_read16(bcm, 0x007A) | 0x0007);
+
+ bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 0);
+
+ bcm43xx_phy_write(bcm, 0x0014, 0x0080);
+ bcm43xx_phy_write(bcm, 0x0032, 0x00CA);
+ bcm43xx_phy_write(bcm, 0x88A3, 0x002A);
+
+ bcm43xx_radio_set_txpower_bg(bcm, 0xFFFF, 0xFFFF, 0xFFFF);
+
+ if (radio->version == 0x2050)
+ bcm43xx_radio_write16(bcm, 0x005D, 0x000D);
+
+ bcm43xx_write16(bcm, 0x03E4, (bcm43xx_read16(bcm, 0x03E4) & 0xFFC0) | 0x0004);
+}
+
+static void bcm43xx_phy_initb6(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 offset, val;
+
+ bcm43xx_phy_write(bcm, 0x003E, 0x817A);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ (bcm43xx_radio_read16(bcm, 0x007A) | 0x0058));
+ if ((radio->manufact == 0x17F) &&
+ (radio->version == 0x2050) &&
+ (radio->revision == 3 ||
+ radio->revision == 4 ||
+ radio->revision == 5)) {
+ bcm43xx_radio_write16(bcm, 0x0051, 0x001F);
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0053, 0x005B);
+ bcm43xx_radio_write16(bcm, 0x0054, 0x0098);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005D, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005E, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x007D, 0x0088);
+ }
+ if ((radio->manufact == 0x17F) &&
+ (radio->version == 0x2050) &&
+ (radio->revision == 6)) {
+ bcm43xx_radio_write16(bcm, 0x0051, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0053, 0x00B7);
+ bcm43xx_radio_write16(bcm, 0x0054, 0x0098);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x008B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x00B5);
+ bcm43xx_radio_write16(bcm, 0x005D, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005E, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x007D, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x007C, 0x0001);
+ bcm43xx_radio_write16(bcm, 0x007E, 0x0008);
+ }
+ if ((radio->manufact == 0x17F) &&
+ (radio->version == 0x2050) &&
+ (radio->revision == 7)) {
+ bcm43xx_radio_write16(bcm, 0x0051, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0053, 0x00B7);
+ bcm43xx_radio_write16(bcm, 0x0054, 0x0098);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x00A8);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x0075);
+ bcm43xx_radio_write16(bcm, 0x005D, 0x00F5);
+ bcm43xx_radio_write16(bcm, 0x005E, 0x00B8);
+ bcm43xx_radio_write16(bcm, 0x007D, 0x00E8);
+ bcm43xx_radio_write16(bcm, 0x007C, 0x0001);
+ bcm43xx_radio_write16(bcm, 0x007E, 0x0008);
+ bcm43xx_radio_write16(bcm, 0x007B, 0x0000);
+ }
+ if ((radio->manufact == 0x17F) &&
+ (radio->version == 0x2050) &&
+ (radio->revision == 8)) {
+ bcm43xx_radio_write16(bcm, 0x0051, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0053, 0x00B7);
+ bcm43xx_radio_write16(bcm, 0x0054, 0x0098);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0088);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x006B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x000F);
+ if (bcm->sprom.boardflags & 0x8000) {
+ bcm43xx_radio_write16(bcm, 0x005D, 0x00FA);
+ bcm43xx_radio_write16(bcm, 0x005E, 0x00D8);
+ } else {
+ bcm43xx_radio_write16(bcm, 0x005D, 0x00F5);
+ bcm43xx_radio_write16(bcm, 0x005E, 0x00B8);
+ }
+ bcm43xx_radio_write16(bcm, 0x0073, 0x0003);
+ bcm43xx_radio_write16(bcm, 0x007D, 0x00A8);
+ bcm43xx_radio_write16(bcm, 0x007C, 0x0001);
+ bcm43xx_radio_write16(bcm, 0x007E, 0x0008);
+ }
+ val = 0x1E1F;
+ for (offset = 0x0088; offset < 0x0098; offset++) {
+ bcm43xx_phy_write(bcm, offset, val);
+ val -= 0x0202;
+ }
+ val = 0x3E3F;
+ for (offset = 0x0098; offset < 0x00A8; offset++) {
+ bcm43xx_phy_write(bcm, offset, val);
+ val -= 0x0202;
+ }
+ val = 0x2120;
+ for (offset = 0x00A8; offset < 0x00C8; offset++) {
+ bcm43xx_phy_write(bcm, offset, (val & 0x3F3F));
+ val += 0x0202;
+ }
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0051,
+ bcm43xx_radio_read16(bcm, 0x0051) | 0x0004);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) | 0x0100);
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B) | 0x2000);
+ }
+
+ /* Force to channel 7, even if not supported. */
+ bcm43xx_radio_selectchannel(bcm, 7, 0);
+
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0023);
+ udelay(40);
+ bcm43xx_radio_write16(bcm, 0x007C, (bcm43xx_radio_read16(bcm, 0x007C) | 0x0002));
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ if (radio->manufact == 0x17F &&
+ radio->version == 0x2050 &&
+ radio->revision <= 2) {
+ bcm43xx_radio_write16(bcm, 0x0050, 0x0020);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0070);
+ bcm43xx_radio_write16(bcm, 0x005B, 0x007B);
+ bcm43xx_radio_write16(bcm, 0x005C, 0x00B0);
+ }
+ bcm43xx_radio_write16(bcm, 0x007A,
+ (bcm43xx_radio_read16(bcm, 0x007A) & 0x00F8) | 0x0007);
+
+ bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 0);
+
+ bcm43xx_phy_write(bcm, 0x0014, 0x0200);
+ if (radio->version == 0x2050){
+ if (radio->revision == 3 ||
+ radio->revision == 4 ||
+ radio->revision == 5)
+ bcm43xx_phy_write(bcm, 0x002A, 0x8AC0);
+ else
+ bcm43xx_phy_write(bcm, 0x002A, 0x88C2);
+ }
+ bcm43xx_phy_write(bcm, 0x0038, 0x0668);
+ bcm43xx_radio_set_txpower_bg(bcm, 0xFFFF, 0xFFFF, 0xFFFF);
+ if (radio->version == 0x2050) {
+ if (radio->revision == 3 ||
+ radio->revision == 4 ||
+ radio->revision == 5)
+ bcm43xx_phy_write(bcm, 0x005D, bcm43xx_phy_read(bcm, 0x005D) | 0x0003);
+ else if (radio->revision <= 2)
+ bcm43xx_radio_write16(bcm, 0x005D, 0x000D);
+ }
+
+ if (phy->rev == 4)
+ bcm43xx_phy_write(bcm, 0x0002, (bcm43xx_phy_read(bcm, 0x0002) & 0xFFC0) | 0x0004);
+ else
+ bcm43xx_write16(bcm, 0x03E4, 0x0009);
+ if (phy->type == BCM43xx_PHYTYPE_B) {
+ bcm43xx_write16(bcm, 0x03E6, 0x8140);
+ bcm43xx_phy_write(bcm, 0x0016, 0x0410);
+ bcm43xx_phy_write(bcm, 0x0017, 0x0820);
+ bcm43xx_phy_write(bcm, 0x0062, 0x0007);
+ (void) bcm43xx_radio_calibrationvalue(bcm);
+ bcm43xx_phy_lo_b_measure(bcm);
+ if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) {
+ bcm43xx_calc_nrssi_slope(bcm);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ }
+ bcm43xx_phy_init_pctl(bcm);
+ } else
+ bcm43xx_write16(bcm, 0x03E6, 0x0);
+}
+
+static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 backup_phy[15];
+ u16 backup_radio[3];
+ u16 backup_bband;
+ u16 i;
+ u16 loop1_cnt, loop1_done, loop1_omitted;
+ u16 loop2_done;
+
+ backup_phy[0] = bcm43xx_phy_read(bcm, 0x0429);
+ backup_phy[1] = bcm43xx_phy_read(bcm, 0x0001);
+ backup_phy[2] = bcm43xx_phy_read(bcm, 0x0811);
+ backup_phy[3] = bcm43xx_phy_read(bcm, 0x0812);
+ backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
+ backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
+ backup_phy[6] = bcm43xx_phy_read(bcm, 0x005A);
+ backup_phy[7] = bcm43xx_phy_read(bcm, 0x0059);
+ backup_phy[8] = bcm43xx_phy_read(bcm, 0x0058);
+ backup_phy[9] = bcm43xx_phy_read(bcm, 0x000A);
+ backup_phy[10] = bcm43xx_phy_read(bcm, 0x0003);
+ backup_phy[11] = bcm43xx_phy_read(bcm, 0x080F);
+ backup_phy[12] = bcm43xx_phy_read(bcm, 0x0810);
+ backup_phy[13] = bcm43xx_phy_read(bcm, 0x002B);
+ backup_phy[14] = bcm43xx_phy_read(bcm, 0x0015);
+ bcm43xx_phy_read(bcm, 0x002D); /* dummy read */
+ backup_bband = radio->baseband_atten;
+ backup_radio[0] = bcm43xx_radio_read16(bcm, 0x0052);
+ backup_radio[1] = bcm43xx_radio_read16(bcm, 0x0043);
+ backup_radio[2] = bcm43xx_radio_read16(bcm, 0x007A);
+
+ bcm43xx_phy_write(bcm, 0x0429,
+ bcm43xx_phy_read(bcm, 0x0429) & 0x3FFF);
+ bcm43xx_phy_write(bcm, 0x0001,
+ bcm43xx_phy_read(bcm, 0x0001) & 0x8000);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x0002);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) & 0xFFFD);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x0001);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) & 0xFFFE);
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) | 0x000C);
+
+ bcm43xx_phy_write(bcm, 0x0811,
+ (bcm43xx_phy_read(bcm, 0x0811)
+ & 0xFFCF) | 0x0030);
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812)
+ & 0xFFCF) | 0x0010);
+
+ bcm43xx_phy_write(bcm, 0x005A, 0x0780);
+ bcm43xx_phy_write(bcm, 0x0059, 0xC810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ if (phy->version == 0) {
+ bcm43xx_phy_write(bcm, 0x0003, 0x0122);
+ } else {
+ bcm43xx_phy_write(bcm, 0x000A,
+ bcm43xx_phy_read(bcm, 0x000A)
+ | 0x2000);
+ }
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+ bcm43xx_phy_write(bcm, 0x0003,
+ (bcm43xx_phy_read(bcm, 0x0003)
+ & 0xFF9F) | 0x0040);
+ if (radio->version == 0x2050 && radio->revision == 2) {
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0043,
+ (bcm43xx_radio_read16(bcm, 0x0043)
+ & 0xFFF0) | 0x0009);
+ loop1_cnt = 9;
+ } else if (radio->revision == 8) {
+ bcm43xx_radio_write16(bcm, 0x0043, 0x000F);
+ loop1_cnt = 15;
+ } else
+ loop1_cnt = 0;
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, 11);
+
+ if (phy->rev >= 3)
+ bcm43xx_phy_write(bcm, 0x080F, 0xC020);
+ else
+ bcm43xx_phy_write(bcm, 0x080F, 0x8020);
+ bcm43xx_phy_write(bcm, 0x0810, 0x0000);
+
+ bcm43xx_phy_write(bcm, 0x002B,
+ (bcm43xx_phy_read(bcm, 0x002B)
+ & 0xFFC0) | 0x0001);
+ bcm43xx_phy_write(bcm, 0x002B,
+ (bcm43xx_phy_read(bcm, 0x002B)
+ & 0xC0FF) | 0x0800);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x0100);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) & 0xCFFF);
+ if (bcm->sprom.boardflags & BCM43xx_BFL_EXTLNA) {
+ if (phy->rev >= 7) {
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811)
+ | 0x0800);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812)
+ | 0x8000);
+ }
+ }
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A)
+ & 0x00F7);
+
+ for (i = 0; i < loop1_cnt; i++) {
+ bcm43xx_radio_write16(bcm, 0x0043, loop1_cnt);
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812)
+ & 0xF0FF) | (i << 8));
+ bcm43xx_phy_write(bcm, 0x0015,
+ (bcm43xx_phy_read(bcm, 0x0015)
+ & 0x0FFF) | 0xA000);
+ bcm43xx_phy_write(bcm, 0x0015,
+ (bcm43xx_phy_read(bcm, 0x0015)
+ & 0x0FFF) | 0xF000);
+ udelay(20);
+ if (bcm43xx_phy_read(bcm, 0x002D) >= 0x0DFC)
+ break;
+ }
+ loop1_done = i;
+ loop1_omitted = loop1_cnt - loop1_done;
+
+ loop2_done = 0;
+ if (loop1_done >= 8) {
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812)
+ | 0x0030);
+ for (i = loop1_done - 8; i < 16; i++) {
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812)
+ & 0xF0FF) | (i << 8));
+ bcm43xx_phy_write(bcm, 0x0015,
+ (bcm43xx_phy_read(bcm, 0x0015)
+ & 0x0FFF) | 0xA000);
+ bcm43xx_phy_write(bcm, 0x0015,
+ (bcm43xx_phy_read(bcm, 0x0015)
+ & 0x0FFF) | 0xF000);
+ udelay(20);
+ if (bcm43xx_phy_read(bcm, 0x002D) >= 0x0DFC)
+ break;
+ }
+ }
+
+ bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
+ bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
+ bcm43xx_phy_write(bcm, 0x005A, backup_phy[6]);
+ bcm43xx_phy_write(bcm, 0x0059, backup_phy[7]);
+ bcm43xx_phy_write(bcm, 0x0058, backup_phy[8]);
+ bcm43xx_phy_write(bcm, 0x000A, backup_phy[9]);
+ bcm43xx_phy_write(bcm, 0x0003, backup_phy[10]);
+ bcm43xx_phy_write(bcm, 0x080F, backup_phy[11]);
+ bcm43xx_phy_write(bcm, 0x0810, backup_phy[12]);
+ bcm43xx_phy_write(bcm, 0x002B, backup_phy[13]);
+ bcm43xx_phy_write(bcm, 0x0015, backup_phy[14]);
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, backup_bband);
+
+ bcm43xx_radio_write16(bcm, 0x0052, backup_radio[0]);
+ bcm43xx_radio_write16(bcm, 0x0043, backup_radio[1]);
+ bcm43xx_radio_write16(bcm, 0x007A, backup_radio[2]);
+
+ bcm43xx_phy_write(bcm, 0x0811, backup_phy[2] | 0x0003);
+ udelay(10);
+ bcm43xx_phy_write(bcm, 0x0811, backup_phy[2]);
+ bcm43xx_phy_write(bcm, 0x0812, backup_phy[3]);
+ bcm43xx_phy_write(bcm, 0x0429, backup_phy[0]);
+ bcm43xx_phy_write(bcm, 0x0001, backup_phy[1]);
+
+ phy->loopback_gain[0] = ((loop1_done * 6) - (loop1_omitted * 4)) - 11;
+ phy->loopback_gain[1] = (24 - (3 * loop2_done)) * 2;
+}
+
+static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 tmp;
+
+ if (phy->rev == 1)
+ bcm43xx_phy_initb5(bcm);
+ else if (phy->rev >= 2 && phy->rev <= 7)
+ bcm43xx_phy_initb6(bcm);
+ if (phy->rev >= 2 || phy->connected)
+ bcm43xx_phy_inita(bcm);
+
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0814, 0x0000);
+ bcm43xx_phy_write(bcm, 0x0815, 0x0000);
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, 0x0811, 0x0000);
+ else if (phy->rev >= 3)
+ bcm43xx_phy_write(bcm, 0x0811, 0x0400);
+ bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
+ if (phy->connected) {
+ tmp = bcm43xx_phy_read(bcm, 0x0400) & 0xFF;
+ if (tmp < 6) {
+ bcm43xx_phy_write(bcm, 0x04C2, 0x1816);
+ bcm43xx_phy_write(bcm, 0x04C3, 0x8006);
+ if (tmp != 3) {
+ bcm43xx_phy_write(bcm, 0x04CC,
+ (bcm43xx_phy_read(bcm, 0x04CC)
+ & 0x00FF) | 0x1F00);
+ }
+ }
+ }
+ }
+ if (phy->rev < 3 && phy->connected)
+ bcm43xx_phy_write(bcm, 0x047E, 0x0078);
+ if (phy->rev >= 6 && phy->rev <= 8) {
+ bcm43xx_phy_write(bcm, 0x0801, bcm43xx_phy_read(bcm, 0x0801) | 0x0080);
+ bcm43xx_phy_write(bcm, 0x043E, bcm43xx_phy_read(bcm, 0x043E) | 0x0004);
+ }
+ if (phy->rev >= 2 && phy->connected)
+ bcm43xx_calc_loopback_gain(bcm);
+ if (radio->revision != 8) {
+ if (radio->initval == 0xFFFF)
+ radio->initval = bcm43xx_radio_init2050(bcm);
+ else
+ bcm43xx_radio_write16(bcm, 0x0078, radio->initval);
+ }
+ if (radio->txctl2 == 0xFFFF) {
+ bcm43xx_phy_lo_g_measure(bcm);
+ } else {
+ if (radio->version == 0x2050 && radio->revision == 8) {
+ //FIXME
+ } else {
+ bcm43xx_radio_write16(bcm, 0x0052,
+ (bcm43xx_radio_read16(bcm, 0x0052)
+ & 0xFFF0) | radio->txctl1);
+ }
+ if (phy->rev >= 6) {
+ /*
+ bcm43xx_phy_write(bcm, 0x0036,
+ (bcm43xx_phy_read(bcm, 0x0036)
+ & 0xF000) | (FIXME << 12));
+ */
+ }
+ if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
+ bcm43xx_phy_write(bcm, 0x002E, 0x8075);
+ else
+ bcm43xx_phy_write(bcm, 0x003E, 0x807F);
+ if (phy->rev < 2)
+ bcm43xx_phy_write(bcm, 0x002F, 0x0101);
+ else
+ bcm43xx_phy_write(bcm, 0x002F, 0x0202);
+ }
+ if (phy->connected) {
+ bcm43xx_phy_lo_adjust(bcm, 0);
+ bcm43xx_phy_write(bcm, 0x080F, 0x8078);
+ }
+
+ if (!(bcm->sprom.boardflags & BCM43xx_BFL_RSSI)) {
+ /* The specs state to update the NRSSI LT with
+ * the value 0x7FFFFFFF here. I think that is some weird
+ * compiler optimization in the original driver.
+ * Essentially, what we do here is resetting all NRSSI LT
+ * entries to -32 (see the limit_value() in nrssi_hw_update())
+ */
+ bcm43xx_nrssi_hw_update(bcm, 0xFFFF);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ } else if (phy->connected) {
+ if (radio->nrssi[0] == -1000) {
+ assert(radio->nrssi[1] == -1000);
+ bcm43xx_calc_nrssi_slope(bcm);
+ } else {
+ assert(radio->nrssi[1] != -1000);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ }
+ }
+ if (radio->revision == 8)
+ bcm43xx_phy_write(bcm, 0x0805, 0x3230);
+ bcm43xx_phy_init_pctl(bcm);
+ if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+ bcm43xx_phy_write(bcm, 0x0429,
+ bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
+ bcm43xx_phy_write(bcm, 0x04C3,
+ bcm43xx_phy_read(bcm, 0x04C3) & 0x7FFF);
+ }
+}
+
+static u16 bcm43xx_phy_lo_b_r15_loop(struct bcm43xx_private *bcm)
+{
+ int i;
+ u16 ret = 0;
+
+ for (i = 0; i < 10; i++){
+ bcm43xx_phy_write(bcm, 0x0015, 0xAFA0);
+ udelay(1);
+ bcm43xx_phy_write(bcm, 0x0015, 0xEFA0);
+ udelay(10);
+ bcm43xx_phy_write(bcm, 0x0015, 0xFFA0);
+ udelay(40);
+ ret += bcm43xx_phy_read(bcm, 0x002C);
+ }
+
+ return ret;
+}
+
+void bcm43xx_phy_lo_b_measure(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 regstack[12] = { 0 };
+ u16 mls;
+ u16 fval;
+ int i, j;
+
+ regstack[0] = bcm43xx_phy_read(bcm, 0x0015);
+ regstack[1] = bcm43xx_radio_read16(bcm, 0x0052) & 0xFFF0;
+
+ if (radio->version == 0x2053) {
+ regstack[2] = bcm43xx_phy_read(bcm, 0x000A);
+ regstack[3] = bcm43xx_phy_read(bcm, 0x002A);
+ regstack[4] = bcm43xx_phy_read(bcm, 0x0035);
+ regstack[5] = bcm43xx_phy_read(bcm, 0x0003);
+ regstack[6] = bcm43xx_phy_read(bcm, 0x0001);
+ regstack[7] = bcm43xx_phy_read(bcm, 0x0030);
+
+ regstack[8] = bcm43xx_radio_read16(bcm, 0x0043);
+ regstack[9] = bcm43xx_radio_read16(bcm, 0x007A);
+ regstack[10] = bcm43xx_read16(bcm, 0x03EC);
+ regstack[11] = bcm43xx_radio_read16(bcm, 0x0052) & 0x00F0;
+
+ bcm43xx_phy_write(bcm, 0x0030, 0x00FF);
+ bcm43xx_write16(bcm, 0x03EC, 0x3F3F);
+ bcm43xx_phy_write(bcm, 0x0035, regstack[4] & 0xFF7F);
+ bcm43xx_radio_write16(bcm, 0x007A, regstack[9] & 0xFFF0);
+ }
+ bcm43xx_phy_write(bcm, 0x0015, 0xB000);
+ bcm43xx_phy_write(bcm, 0x002B, 0x0004);
+
+ if (radio->version == 0x2053) {
+ bcm43xx_phy_write(bcm, 0x002B, 0x0203);
+ bcm43xx_phy_write(bcm, 0x002A, 0x08A3);
+ }
+
+ phy->minlowsig[0] = 0xFFFF;
+
+ for (i = 0; i < 4; i++) {
+ bcm43xx_radio_write16(bcm, 0x0052, regstack[1] | i);
+ bcm43xx_phy_lo_b_r15_loop(bcm);
+ }
+ for (i = 0; i < 10; i++) {
+ bcm43xx_radio_write16(bcm, 0x0052, regstack[1] | i);
+ mls = bcm43xx_phy_lo_b_r15_loop(bcm) / 10;
+ if (mls < phy->minlowsig[0]) {
+ phy->minlowsig[0] = mls;
+ phy->minlowsigpos[0] = i;
+ }
+ }
+ bcm43xx_radio_write16(bcm, 0x0052, regstack[1] | phy->minlowsigpos[0]);
+
+ phy->minlowsig[1] = 0xFFFF;
+
+ for (i = -4; i < 5; i += 2) {
+ for (j = -4; j < 5; j += 2) {
+ if (j < 0)
+ fval = (0x0100 * i) + j + 0x0100;
+ else
+ fval = (0x0100 * i) + j;
+ bcm43xx_phy_write(bcm, 0x002F, fval);
+ mls = bcm43xx_phy_lo_b_r15_loop(bcm) / 10;
+ if (mls < phy->minlowsig[1]) {
+ phy->minlowsig[1] = mls;
+ phy->minlowsigpos[1] = fval;
+ }
+ }
+ }
+ phy->minlowsigpos[1] += 0x0101;
+
+ bcm43xx_phy_write(bcm, 0x002F, phy->minlowsigpos[1]);
+ if (radio->version == 0x2053) {
+ bcm43xx_phy_write(bcm, 0x000A, regstack[2]);
+ bcm43xx_phy_write(bcm, 0x002A, regstack[3]);
+ bcm43xx_phy_write(bcm, 0x0035, regstack[4]);
+ bcm43xx_phy_write(bcm, 0x0003, regstack[5]);
+ bcm43xx_phy_write(bcm, 0x0001, regstack[6]);
+ bcm43xx_phy_write(bcm, 0x0030, regstack[7]);
+
+ bcm43xx_radio_write16(bcm, 0x0043, regstack[8]);
+ bcm43xx_radio_write16(bcm, 0x007A, regstack[9]);
+
+ bcm43xx_radio_write16(bcm, 0x0052,
+ (bcm43xx_radio_read16(bcm, 0x0052) & 0x000F)
+ | regstack[11]);
+
+ bcm43xx_write16(bcm, 0x03EC, regstack[10]);
+ }
+ bcm43xx_phy_write(bcm, 0x0015, regstack[0]);
+}
+
+static inline
+u16 bcm43xx_phy_lo_g_deviation_subval(struct bcm43xx_private *bcm, u16 control)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, 0x15, 0xE300);
+ control <<= 8;
+ bcm43xx_phy_write(bcm, 0x0812, control | 0x00B0);
+ udelay(5);
+ bcm43xx_phy_write(bcm, 0x0812, control | 0x00B2);
+ udelay(2);
+ bcm43xx_phy_write(bcm, 0x0812, control | 0x00B3);
+ udelay(4);
+ bcm43xx_phy_write(bcm, 0x0015, 0xF300);
+ udelay(8);
+ } else {
+ bcm43xx_phy_write(bcm, 0x0015, control | 0xEFA0);
+ udelay(2);
+ bcm43xx_phy_write(bcm, 0x0015, control | 0xEFE0);
+ udelay(4);
+ bcm43xx_phy_write(bcm, 0x0015, control | 0xFFE0);
+ udelay(8);
+ }
+
+ return bcm43xx_phy_read(bcm, 0x002D);
+}
+
+static u32 bcm43xx_phy_lo_g_singledeviation(struct bcm43xx_private *bcm, u16 control)
+{
+ int i;
+ u32 ret = 0;
+
+ for (i = 0; i < 8; i++)
+ ret += bcm43xx_phy_lo_g_deviation_subval(bcm, control);
+
+ return ret;
+}
+
+/* Write the LocalOscillator CONTROL */
+static inline
+void bcm43xx_lo_write(struct bcm43xx_private *bcm,
+ struct bcm43xx_lopair *pair)
+{
+ u16 value;
+
+ value = (u8)(pair->low);
+ value |= ((u8)(pair->high)) << 8;
+
+#ifdef CONFIG_BCM43XX_DEBUG
+ /* Sanity check. */
+ if (pair->low < -8 || pair->low > 8 ||
+ pair->high < -8 || pair->high > 8) {
+ printk(KERN_WARNING PFX
+ "WARNING: Writing invalid LOpair "
+ "(low: %d, high: %d, index: %lu)\n",
+ pair->low, pair->high,
+ (unsigned long)(pair - bcm43xx_current_phy(bcm)->_lo_pairs));
+ dump_stack();
+ }
+#endif
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_LO_CONTROL, value);
+}
+
+static inline
+struct bcm43xx_lopair * bcm43xx_find_lopair(struct bcm43xx_private *bcm,
+ u16 baseband_attenuation,
+ u16 radio_attenuation,
+ u16 tx)
+{
+ static const u8 dict[10] = { 11, 10, 11, 12, 13, 12, 13, 12, 13, 12 };
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ if (baseband_attenuation > 6)
+ baseband_attenuation = 6;
+ assert(radio_attenuation < 10);
+
+ if (tx == 3) {
+ return bcm43xx_get_lopair(phy,
+ radio_attenuation,
+ baseband_attenuation);
+ }
+ return bcm43xx_get_lopair(phy, dict[radio_attenuation], baseband_attenuation);
+}
+
+static inline
+struct bcm43xx_lopair * bcm43xx_current_lopair(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ return bcm43xx_find_lopair(bcm,
+ radio->baseband_atten,
+ radio->radio_atten,
+ radio->txctl1);
+}
+
+/* Adjust B/G LO */
+void bcm43xx_phy_lo_adjust(struct bcm43xx_private *bcm, int fixed)
+{
+ struct bcm43xx_lopair *pair;
+
+ if (fixed) {
+ /* Use fixed values. Only for initialization. */
+ pair = bcm43xx_find_lopair(bcm, 2, 3, 0);
+ } else
+ pair = bcm43xx_current_lopair(bcm);
+ bcm43xx_lo_write(bcm, pair);
+}
+
+static void bcm43xx_phy_lo_g_measure_txctl2(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 txctl2 = 0, i;
+ u32 smallest, tmp;
+
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0000);
+ udelay(10);
+ smallest = bcm43xx_phy_lo_g_singledeviation(bcm, 0);
+ for (i = 0; i < 16; i++) {
+ bcm43xx_radio_write16(bcm, 0x0052, i);
+ udelay(10);
+ tmp = bcm43xx_phy_lo_g_singledeviation(bcm, 0);
+ if (tmp < smallest) {
+ smallest = tmp;
+ txctl2 = i;
+ }
+ }
+ radio->txctl2 = txctl2;
+}
+
+static
+void bcm43xx_phy_lo_g_state(struct bcm43xx_private *bcm,
+ const struct bcm43xx_lopair *in_pair,
+ struct bcm43xx_lopair *out_pair,
+ u16 r27)
+{
+ static const struct bcm43xx_lopair transitions[8] = {
+ { .high = 1, .low = 1, },
+ { .high = 1, .low = 0, },
+ { .high = 1, .low = -1, },
+ { .high = 0, .low = -1, },
+ { .high = -1, .low = -1, },
+ { .high = -1, .low = 0, },
+ { .high = -1, .low = 1, },
+ { .high = 0, .low = 1, },
+ };
+ struct bcm43xx_lopair lowest_transition = {
+ .high = in_pair->high,
+ .low = in_pair->low,
+ };
+ struct bcm43xx_lopair tmp_pair;
+ struct bcm43xx_lopair transition;
+ int i = 12;
+ int state = 0;
+ int found_lower;
+ int j, begin, end;
+ u32 lowest_deviation;
+ u32 tmp;
+
+ /* Note that in_pair and out_pair can point to the same pair. Be careful. */
+
+ bcm43xx_lo_write(bcm, &lowest_transition);
+ lowest_deviation = bcm43xx_phy_lo_g_singledeviation(bcm, r27);
+ do {
+ found_lower = 0;
+ assert(state >= 0 && state <= 8);
+ if (state == 0) {
+ begin = 1;
+ end = 8;
+ } else if (state % 2 == 0) {
+ begin = state - 1;
+ end = state + 1;
+ } else {
+ begin = state - 2;
+ end = state + 2;
+ }
+ if (begin < 1)
+ begin += 8;
+ if (end > 8)
+ end -= 8;
+
+ j = begin;
+ tmp_pair.high = lowest_transition.high;
+ tmp_pair.low = lowest_transition.low;
+ while (1) {
+ assert(j >= 1 && j <= 8);
+ transition.high = tmp_pair.high + transitions[j - 1].high;
+ transition.low = tmp_pair.low + transitions[j - 1].low;
+ if ((abs(transition.low) < 9) && (abs(transition.high) < 9)) {
+ bcm43xx_lo_write(bcm, &transition);
+ tmp = bcm43xx_phy_lo_g_singledeviation(bcm, r27);
+ if (tmp < lowest_deviation) {
+ lowest_deviation = tmp;
+ state = j;
+ found_lower = 1;
+
+ lowest_transition.high = transition.high;
+ lowest_transition.low = transition.low;
+ }
+ }
+ if (j == end)
+ break;
+ if (j == 8)
+ j = 1;
+ else
+ j++;
+ }
+ } while (i-- && found_lower);
+
+ out_pair->high = lowest_transition.high;
+ out_pair->low = lowest_transition.low;
+}
+
+/* Set the baseband attenuation value on chip. */
+void bcm43xx_phy_set_baseband_attenuation(struct bcm43xx_private *bcm,
+ u16 baseband_attenuation)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 value;
+
+ if (phy->version == 0) {
+ value = (bcm43xx_read16(bcm, 0x03E6) & 0xFFF0);
+ value |= (baseband_attenuation & 0x000F);
+ bcm43xx_write16(bcm, 0x03E6, value);
+ return;
+ }
+
+ if (phy->version > 1) {
+ value = bcm43xx_phy_read(bcm, 0x0060) & ~0x003C;
+ value |= (baseband_attenuation << 2) & 0x003C;
+ } else {
+ value = bcm43xx_phy_read(bcm, 0x0060) & ~0x0078;
+ value |= (baseband_attenuation << 3) & 0x0078;
+ }
+ bcm43xx_phy_write(bcm, 0x0060, value);
+}
+
+/* http://bcm-specs.sipsolutions.net/LocalOscillator/Measure */
+void bcm43xx_phy_lo_g_measure(struct bcm43xx_private *bcm)
+{
+ static const u8 pairorder[10] = { 3, 1, 5, 7, 9, 2, 0, 4, 6, 8 };
+ const int is_initializing = bcm43xx_is_initializing(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 h, i, oldi = 0, j;
+ struct bcm43xx_lopair control;
+ struct bcm43xx_lopair *tmp_control;
+ u16 tmp;
+ u16 regstack[16] = { 0 };
+ u8 oldchannel;
+
+ //XXX: What are these?
+ u8 r27 = 0, r31;
+
+ oldchannel = radio->channel;
+ /* Setup */
+ if (phy->connected) {
+ regstack[0] = bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS);
+ regstack[1] = bcm43xx_phy_read(bcm, 0x0802);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS, regstack[0] & 0x7FFF);
+ bcm43xx_phy_write(bcm, 0x0802, regstack[1] & 0xFFFC);
+ }
+ regstack[3] = bcm43xx_read16(bcm, 0x03E2);
+ bcm43xx_write16(bcm, 0x03E2, regstack[3] | 0x8000);
+ regstack[4] = bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT);
+ regstack[5] = bcm43xx_phy_read(bcm, 0x15);
+ regstack[6] = bcm43xx_phy_read(bcm, 0x2A);
+ regstack[7] = bcm43xx_phy_read(bcm, 0x35);
+ regstack[8] = bcm43xx_phy_read(bcm, 0x60);
+ regstack[9] = bcm43xx_radio_read16(bcm, 0x43);
+ regstack[10] = bcm43xx_radio_read16(bcm, 0x7A);
+ regstack[11] = bcm43xx_radio_read16(bcm, 0x52);
+ if (phy->connected) {
+ regstack[12] = bcm43xx_phy_read(bcm, 0x0811);
+ regstack[13] = bcm43xx_phy_read(bcm, 0x0812);
+ regstack[14] = bcm43xx_phy_read(bcm, 0x0814);
+ regstack[15] = bcm43xx_phy_read(bcm, 0x0815);
+ }
+ bcm43xx_radio_selectchannel(bcm, 6, 0);
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS, regstack[0] & 0x7FFF);
+ bcm43xx_phy_write(bcm, 0x0802, regstack[1] & 0xFFFC);
+ bcm43xx_dummy_transmission(bcm);
+ }
+ bcm43xx_radio_write16(bcm, 0x0043, 0x0006);
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, 2);
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, 0x0000);
+ bcm43xx_phy_write(bcm, 0x002E, 0x007F);
+ bcm43xx_phy_write(bcm, 0x080F, 0x0078);
+ bcm43xx_phy_write(bcm, 0x0035, regstack[7] & ~(1 << 7));
+ bcm43xx_radio_write16(bcm, 0x007A, regstack[10] & 0xFFF0);
+ bcm43xx_phy_write(bcm, 0x002B, 0x0203);
+ bcm43xx_phy_write(bcm, 0x002A, 0x08A3);
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, 0x0814, regstack[14] | 0x0003);
+ bcm43xx_phy_write(bcm, 0x0815, regstack[15] & 0xFFFC);
+ bcm43xx_phy_write(bcm, 0x0811, 0x01B3);
+ bcm43xx_phy_write(bcm, 0x0812, 0x00B2);
+ }
+ if (is_initializing)
+ bcm43xx_phy_lo_g_measure_txctl2(bcm);
+ bcm43xx_phy_write(bcm, 0x080F, 0x8078);
+
+ /* Measure */
+ control.low = 0;
+ control.high = 0;
+ for (h = 0; h < 10; h++) {
+ /* Loop over each possible RadioAttenuation (0-9) */
+ i = pairorder[h];
+ if (is_initializing) {
+ if (i == 3) {
+ control.low = 0;
+ control.high = 0;
+ } else if (((i % 2 == 1) && (oldi % 2 == 1)) ||
+ ((i % 2 == 0) && (oldi % 2 == 0))) {
+ tmp_control = bcm43xx_get_lopair(phy, oldi, 0);
+ memcpy(&control, tmp_control, sizeof(control));
+ } else {
+ tmp_control = bcm43xx_get_lopair(phy, 3, 0);
+ memcpy(&control, tmp_control, sizeof(control));
+ }
+ }
+ /* Loop over each possible BasebandAttenuation/2 */
+ for (j = 0; j < 4; j++) {
+ if (is_initializing) {
+ tmp = i * 2 + j;
+ r27 = 0;
+ r31 = 0;
+ if (tmp > 14) {
+ r31 = 1;
+ if (tmp > 17)
+ r27 = 1;
+ if (tmp > 19)
+ r27 = 2;
+ }
+ } else {
+ tmp_control = bcm43xx_get_lopair(phy, i, j * 2);
+ if (!tmp_control->used)
+ continue;
+ memcpy(&control, tmp_control, sizeof(control));
+ r27 = 3;
+ r31 = 0;
+ }
+ bcm43xx_radio_write16(bcm, 0x43, i);
+ bcm43xx_radio_write16(bcm, 0x52, radio->txctl2);
+ udelay(10);
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, j * 2);
+
+ tmp = (regstack[10] & 0xFFF0);
+ if (r31)
+ tmp |= 0x0008;
+ bcm43xx_radio_write16(bcm, 0x007A, tmp);
+
+ tmp_control = bcm43xx_get_lopair(phy, i, j * 2);
+ bcm43xx_phy_lo_g_state(bcm, &control, tmp_control, r27);
+ }
+ oldi = i;
+ }
+ /* Loop over each possible RadioAttenuation (10-13) */
+ for (i = 10; i < 14; i++) {
+ /* Loop over each possible BasebandAttenuation/2 */
+ for (j = 0; j < 4; j++) {
+ if (is_initializing) {
+ tmp_control = bcm43xx_get_lopair(phy, i - 9, j * 2);
+ memcpy(&control, tmp_control, sizeof(control));
+ tmp = (i - 9) * 2 + j - 5;//FIXME: This is wrong, as the following if statement can never trigger.
+ r27 = 0;
+ r31 = 0;
+ if (tmp > 14) {
+ r31 = 1;
+ if (tmp > 17)
+ r27 = 1;
+ if (tmp > 19)
+ r27 = 2;
+ }
+ } else {
+ tmp_control = bcm43xx_get_lopair(phy, i - 9, j * 2);
+ if (!tmp_control->used)
+ continue;
+ memcpy(&control, tmp_control, sizeof(control));
+ r27 = 3;
+ r31 = 0;
+ }
+ bcm43xx_radio_write16(bcm, 0x43, i - 9);
+ bcm43xx_radio_write16(bcm, 0x52,
+ radio->txctl2
+ | (3/*txctl1*/ << 4));//FIXME: shouldn't txctl1 be zero here and 3 in the loop above?
+ udelay(10);
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, j * 2);
+
+ tmp = (regstack[10] & 0xFFF0);
+ if (r31)
+ tmp |= 0x0008;
+ bcm43xx_radio_write16(bcm, 0x7A, tmp);
+
+ tmp_control = bcm43xx_get_lopair(phy, i, j * 2);
+ bcm43xx_phy_lo_g_state(bcm, &control, tmp_control, r27);
+ }
+ }
+
+ /* Restoration */
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, 0x0015, 0xE300);
+ bcm43xx_phy_write(bcm, 0x0812, (r27 << 8) | 0xA0);
+ udelay(5);
+ bcm43xx_phy_write(bcm, 0x0812, (r27 << 8) | 0xA2);
+ udelay(2);
+ bcm43xx_phy_write(bcm, 0x0812, (r27 << 8) | 0xA3);
+ } else
+ bcm43xx_phy_write(bcm, 0x0015, r27 | 0xEFA0);
+ bcm43xx_phy_lo_adjust(bcm, is_initializing);
+ bcm43xx_phy_write(bcm, 0x002E, 0x807F);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x002F, 0x0202);
+ else
+ bcm43xx_phy_write(bcm, 0x002F, 0x0101);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, regstack[4]);
+ bcm43xx_phy_write(bcm, 0x0015, regstack[5]);
+ bcm43xx_phy_write(bcm, 0x002A, regstack[6]);
+ bcm43xx_phy_write(bcm, 0x0035, regstack[7]);
+ bcm43xx_phy_write(bcm, 0x0060, regstack[8]);
+ bcm43xx_radio_write16(bcm, 0x0043, regstack[9]);
+ bcm43xx_radio_write16(bcm, 0x007A, regstack[10]);
+ regstack[11] &= 0x00F0;
+ regstack[11] |= (bcm43xx_radio_read16(bcm, 0x52) & 0x000F);
+ bcm43xx_radio_write16(bcm, 0x52, regstack[11]);
+ bcm43xx_write16(bcm, 0x03E2, regstack[3]);
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, 0x0811, regstack[12]);
+ bcm43xx_phy_write(bcm, 0x0812, regstack[13]);
+ bcm43xx_phy_write(bcm, 0x0814, regstack[14]);
+ bcm43xx_phy_write(bcm, 0x0815, regstack[15]);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS, regstack[0]);
+ bcm43xx_phy_write(bcm, 0x0802, regstack[1]);
+ }
+ bcm43xx_radio_selectchannel(bcm, oldchannel, 1);
+
+#ifdef CONFIG_BCM43XX_DEBUG
+ {
+ /* Sanity check for all lopairs. */
+ for (i = 0; i < BCM43xx_LO_COUNT; i++) {
+ tmp_control = phy->_lo_pairs + i;
+ if (tmp_control->low < -8 || tmp_control->low > 8 ||
+ tmp_control->high < -8 || tmp_control->high > 8) {
+ printk(KERN_WARNING PFX
+ "WARNING: Invalid LOpair (low: %d, high: %d, index: %d)\n",
+ tmp_control->low, tmp_control->high, i);
+ }
+ }
+ }
+#endif /* CONFIG_BCM43XX_DEBUG */
+}
+
+static
+void bcm43xx_phy_lo_mark_current_used(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_lopair *pair;
+
+ pair = bcm43xx_current_lopair(bcm);
+ pair->used = 1;
+}
+
+void bcm43xx_phy_lo_mark_all_unused(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_lopair *pair;
+ int i;
+
+ for (i = 0; i < BCM43xx_LO_COUNT; i++) {
+ pair = phy->_lo_pairs + i;
+ pair->used = 0;
+ }
+}
+
+/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
+ * This function converts a TSSI value to dBm in Q5.2
+ */
+static s8 bcm43xx_phy_estimate_power_out(struct bcm43xx_private *bcm, s8 tssi)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ s8 dbm = 0;
+ s32 tmp;
+
+ tmp = phy->idle_tssi;
+ tmp += tssi;
+ tmp -= phy->savedpctlreg;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ tmp += 0x80;
+ tmp = limit_value(tmp, 0x00, 0xFF);
+ dbm = phy->tssi2dbm[tmp];
+ TODO(); //TODO: There's a FIXME on the specs
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ tmp = limit_value(tmp, 0x00, 0x3F);
+ dbm = phy->tssi2dbm[tmp];
+ break;
+ default:
+ assert(0);
+ }
+
+ return dbm;
+}
+
+/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
+void bcm43xx_phy_xmitpower(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ if (phy->savedpctlreg == 0xFFFF)
+ return;
+ if ((bcm->board_type == 0x0416) &&
+ (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM))
+ return;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A: {
+
+ TODO(); //TODO: Nothing for A PHYs yet :-/
+
+ break;
+ }
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G: {
+ u16 tmp;
+ u16 txpower;
+ s8 v0, v1, v2, v3;
+ s8 average;
+ u8 max_pwr;
+ s16 desired_pwr, estimated_pwr, pwr_adjust;
+ s16 radio_att_delta, baseband_att_delta;
+ s16 radio_attenuation, baseband_attenuation;
+ unsigned long phylock_flags;
+
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x0058);
+ v0 = (s8)(tmp & 0x00FF);
+ v1 = (s8)((tmp & 0xFF00) >> 8);
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x005A);
+ v2 = (s8)(tmp & 0x00FF);
+ v3 = (s8)((tmp & 0xFF00) >> 8);
+ tmp = 0;
+
+ if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F || v3 == 0x7F) {
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x0070);
+ v0 = (s8)(tmp & 0x00FF);
+ v1 = (s8)((tmp & 0xFF00) >> 8);
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x0072);
+ v2 = (s8)(tmp & 0x00FF);
+ v3 = (s8)((tmp & 0xFF00) >> 8);
+ if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F || v3 == 0x7F)
+ return;
+ v0 = (v0 + 0x20) & 0x3F;
+ v1 = (v1 + 0x20) & 0x3F;
+ v2 = (v2 + 0x20) & 0x3F;
+ v3 = (v3 + 0x20) & 0x3F;
+ tmp = 1;
+ }
+ bcm43xx_radio_clear_tssi(bcm);
+
+ average = (v0 + v1 + v2 + v3 + 2) / 4;
+
+ if (tmp && (bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x005E) & 0x8))
+ average -= 13;
+
+ estimated_pwr = bcm43xx_phy_estimate_power_out(bcm, average);
+
+ max_pwr = bcm->sprom.maxpower_bgphy;
+
+ if ((bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) &&
+ (phy->type == BCM43xx_PHYTYPE_G))
+ max_pwr -= 0x3;
+
+ /*TODO:
+ max_pwr = min(REG - bcm->sprom.antennagain_bgphy - 0x6, max_pwr)
+ where REG is the max power as per the regulatory domain
+ */
+
+ desired_pwr = limit_value(radio->txpower_desired, 0, max_pwr);
+ /* Check if we need to adjust the current power. */
+ pwr_adjust = desired_pwr - estimated_pwr;
+ radio_att_delta = -(pwr_adjust + 7) >> 3;
+ baseband_att_delta = -(pwr_adjust >> 1) - (4 * radio_att_delta);
+ if ((radio_att_delta == 0) && (baseband_att_delta == 0)) {
+ bcm43xx_phy_lo_mark_current_used(bcm);
+ return;
+ }
+
+ /* Calculate the new attenuation values. */
+ baseband_attenuation = radio->baseband_atten;
+ baseband_attenuation += baseband_att_delta;
+ radio_attenuation = radio->radio_atten;
+ radio_attenuation += radio_att_delta;
+
+ /* Get baseband and radio attenuation values into their permitted ranges.
+ * baseband 0-11, radio 0-9.
+ * Radio attenuation affects power level 4 times as much as baseband.
+ */
+ if (radio_attenuation < 0) {
+ baseband_attenuation -= (4 * -radio_attenuation);
+ radio_attenuation = 0;
+ } else if (radio_attenuation > 9) {
+ baseband_attenuation += (4 * (radio_attenuation - 9));
+ radio_attenuation = 9;
+ } else {
+ while (baseband_attenuation < 0 && radio_attenuation > 0) {
+ baseband_attenuation += 4;
+ radio_attenuation--;
+ }
+ while (baseband_attenuation > 11 && radio_attenuation < 9) {
+ baseband_attenuation -= 4;
+ radio_attenuation++;
+ }
+ }
+ baseband_attenuation = limit_value(baseband_attenuation, 0, 11);
+
+ txpower = radio->txctl1;
+ if ((radio->version == 0x2050) && (radio->revision == 2)) {
+ if (radio_attenuation <= 1) {
+ if (txpower == 0) {
+ txpower = 3;
+ radio_attenuation += 2;
+ baseband_attenuation += 2;
+ } else if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) {
+ baseband_attenuation += 4 * (radio_attenuation - 2);
+ radio_attenuation = 2;
+ }
+ } else if (radio_attenuation > 4 && txpower != 0) {
+ txpower = 0;
+ if (baseband_attenuation < 3) {
+ radio_attenuation -= 3;
+ baseband_attenuation += 2;
+ } else {
+ radio_attenuation -= 2;
+ baseband_attenuation -= 2;
+ }
+ }
+ }
+ radio->txctl1 = txpower;
+ baseband_attenuation = limit_value(baseband_attenuation, 0, 11);
+ radio_attenuation = limit_value(radio_attenuation, 0, 9);
+
+ bcm43xx_phy_lock(bcm, phylock_flags);
+ bcm43xx_radio_lock(bcm);
+ bcm43xx_radio_set_txpower_bg(bcm, baseband_attenuation,
+ radio_attenuation, txpower);
+ bcm43xx_phy_lo_mark_current_used(bcm);
+ bcm43xx_radio_unlock(bcm);
+ bcm43xx_phy_unlock(bcm, phylock_flags);
+ break;
+ }
+ default:
+ assert(0);
+ }
+}
+
+static inline
+s32 bcm43xx_tssi2dbm_ad(s32 num, s32 den)
+{
+ if (num < 0)
+ return num/den;
+ else
+ return (num+den/2)/den;
+}
+
+static inline
+s8 bcm43xx_tssi2dbm_entry(s8 entry [], u8 index, s16 pab0, s16 pab1, s16 pab2)
+{
+ s32 m1, m2, f = 256, q, delta;
+ s8 i = 0;
+
+ m1 = bcm43xx_tssi2dbm_ad(16 * pab0 + index * pab1, 32);
+ m2 = max(bcm43xx_tssi2dbm_ad(32768 + index * pab2, 256), 1);
+ do {
+ if (i > 15)
+ return -EINVAL;
+ q = bcm43xx_tssi2dbm_ad(f * 4096 -
+ bcm43xx_tssi2dbm_ad(m2 * f, 16) * f, 2048);
+ delta = abs(q - f);
+ f = q;
+ i++;
+ } while (delta >= 2);
+ entry[index] = limit_value(bcm43xx_tssi2dbm_ad(m1 * f, 8192), -127, 128);
+ return 0;
+}
+
+/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */
+int bcm43xx_phy_init_tssi2dbm_table(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ s16 pab0, pab1, pab2;
+ u8 idx;
+ s8 *dyn_tssi2dbm;
+
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ pab0 = (s16)(bcm->sprom.pa1b0);
+ pab1 = (s16)(bcm->sprom.pa1b1);
+ pab2 = (s16)(bcm->sprom.pa1b2);
+ } else {
+ pab0 = (s16)(bcm->sprom.pa0b0);
+ pab1 = (s16)(bcm->sprom.pa0b1);
+ pab2 = (s16)(bcm->sprom.pa0b2);
+ }
+
+ if ((bcm->chip_id == 0x4301) && (radio->version != 0x2050)) {
+ phy->idle_tssi = 0x34;
+ phy->tssi2dbm = bcm43xx_tssi2dbm_b_table;
+ return 0;
+ }
+
+ if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
+ pab0 != -1 && pab1 != -1 && pab2 != -1) {
+ /* The pabX values are set in SPROM. Use them. */
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ if ((s8)bcm->sprom.idle_tssi_tgt_aphy != 0 &&
+ (s8)bcm->sprom.idle_tssi_tgt_aphy != -1)
+ phy->idle_tssi = (s8)(bcm->sprom.idle_tssi_tgt_aphy);
+ else
+ phy->idle_tssi = 62;
+ } else {
+ if ((s8)bcm->sprom.idle_tssi_tgt_bgphy != 0 &&
+ (s8)bcm->sprom.idle_tssi_tgt_bgphy != -1)
+ phy->idle_tssi = (s8)(bcm->sprom.idle_tssi_tgt_bgphy);
+ else
+ phy->idle_tssi = 62;
+ }
+ dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
+ if (dyn_tssi2dbm == NULL) {
+ printk(KERN_ERR PFX "Could not allocate memory"
+ "for tssi2dbm table\n");
+ return -ENOMEM;
+ }
+ for (idx = 0; idx < 64; idx++)
+ if (bcm43xx_tssi2dbm_entry(dyn_tssi2dbm, idx, pab0, pab1, pab2)) {
+ phy->tssi2dbm = NULL;
+ printk(KERN_ERR PFX "Could not generate "
+ "tssi2dBm table\n");
+ return -ENODEV;
+ }
+ phy->tssi2dbm = dyn_tssi2dbm;
+ phy->dyn_tssi_tbl = 1;
+ } else {
+ /* pabX values not set in SPROM. */
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ /* APHY needs a generated table. */
+ phy->tssi2dbm = NULL;
+ printk(KERN_ERR PFX "Could not generate tssi2dBm "
+ "table (wrong SPROM info)!\n");
+ return -ENODEV;
+ case BCM43xx_PHYTYPE_B:
+ phy->idle_tssi = 0x34;
+ phy->tssi2dbm = bcm43xx_tssi2dbm_b_table;
+ break;
+ case BCM43xx_PHYTYPE_G:
+ phy->idle_tssi = 0x34;
+ phy->tssi2dbm = bcm43xx_tssi2dbm_g_table;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+int bcm43xx_phy_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ int err = -ENODEV;
+ unsigned long flags;
+
+ /* We do not want to be preempted while calibrating
+ * the hardware.
+ */
+ local_irq_save(flags);
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ if (phy->rev == 2 || phy->rev == 3) {
+ bcm43xx_phy_inita(bcm);
+ err = 0;
+ }
+ break;
+ case BCM43xx_PHYTYPE_B:
+ switch (phy->rev) {
+ case 2:
+ bcm43xx_phy_initb2(bcm);
+ err = 0;
+ break;
+ case 4:
+ bcm43xx_phy_initb4(bcm);
+ err = 0;
+ break;
+ case 5:
+ bcm43xx_phy_initb5(bcm);
+ err = 0;
+ break;
+ case 6:
+ bcm43xx_phy_initb6(bcm);
+ err = 0;
+ break;
+ }
+ break;
+ case BCM43xx_PHYTYPE_G:
+ bcm43xx_phy_initg(bcm);
+ err = 0;
+ break;
+ }
+ local_irq_restore(flags);
+ if (err)
+ printk(KERN_WARNING PFX "Unknown PHYTYPE found!\n");
+
+ return err;
+}
+
+void bcm43xx_phy_set_antenna_diversity(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 antennadiv;
+ u16 offset;
+ u16 value;
+ u32 ucodeflags;
+
+ antennadiv = phy->antenna_diversity;
+
+ if (antennadiv == 0xFFFF)
+ antennadiv = 3;
+ assert(antennadiv <= 3);
+
+ ucodeflags = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET);
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ ucodeflags & ~BCM43xx_UCODEFLAG_AUTODIV);
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ case BCM43xx_PHYTYPE_G:
+ if (phy->type == BCM43xx_PHYTYPE_A)
+ offset = 0x0000;
+ else
+ offset = 0x0400;
+
+ if (antennadiv == 2)
+ value = (3/*automatic*/ << 7);
+ else
+ value = (antennadiv << 7);
+ bcm43xx_phy_write(bcm, offset + 1,
+ (bcm43xx_phy_read(bcm, offset + 1)
+ & 0x7E7F) | value);
+
+ if (antennadiv >= 2) {
+ if (antennadiv == 2)
+ value = (antennadiv << 7);
+ else
+ value = (0/*force0*/ << 7);
+ bcm43xx_phy_write(bcm, offset + 0x2B,
+ (bcm43xx_phy_read(bcm, offset + 0x2B)
+ & 0xFEFF) | value);
+ }
+
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (antennadiv >= 2)
+ bcm43xx_phy_write(bcm, 0x048C,
+ bcm43xx_phy_read(bcm, 0x048C)
+ | 0x2000);
+ else
+ bcm43xx_phy_write(bcm, 0x048C,
+ bcm43xx_phy_read(bcm, 0x048C)
+ & ~0x2000);
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0461,
+ bcm43xx_phy_read(bcm, 0x0461)
+ | 0x0010);
+ bcm43xx_phy_write(bcm, 0x04AD,
+ (bcm43xx_phy_read(bcm, 0x04AD)
+ & 0x00FF) | 0x0015);
+ if (phy->rev == 2)
+ bcm43xx_phy_write(bcm, 0x0427, 0x0008);
+ else
+ bcm43xx_phy_write(bcm, 0x0427,
+ (bcm43xx_phy_read(bcm, 0x0427)
+ & 0x00FF) | 0x0008);
+ }
+ else if (phy->rev >= 6)
+ bcm43xx_phy_write(bcm, 0x049B, 0x00DC);
+ } else {
+ if (phy->rev < 3)
+ bcm43xx_phy_write(bcm, 0x002B,
+ (bcm43xx_phy_read(bcm, 0x002B)
+ & 0x00FF) | 0x0024);
+ else {
+ bcm43xx_phy_write(bcm, 0x0061,
+ bcm43xx_phy_read(bcm, 0x0061)
+ | 0x0010);
+ if (phy->rev == 3) {
+ bcm43xx_phy_write(bcm, 0x0093, 0x001D);
+ bcm43xx_phy_write(bcm, 0x0027, 0x0008);
+ } else {
+ bcm43xx_phy_write(bcm, 0x0093, 0x003A);
+ bcm43xx_phy_write(bcm, 0x0027,
+ (bcm43xx_phy_read(bcm, 0x0027)
+ & 0x00FF) | 0x0008);
+ }
+ }
+ }
+ break;
+ case BCM43xx_PHYTYPE_B:
+ if (bcm->current_core->rev == 2)
+ value = (3/*automatic*/ << 7);
+ else
+ value = (antennadiv << 7);
+ bcm43xx_phy_write(bcm, 0x03E2,
+ (bcm43xx_phy_read(bcm, 0x03E2)
+ & 0xFE7F) | value);
+ break;
+ default:
+ assert(0);
+ }
+
+ if (antennadiv >= 2) {
+ ucodeflags = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET);
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ ucodeflags | BCM43xx_UCODEFLAG_AUTODIV);
+ }
+
+ phy->antenna_diversity = antennadiv;
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.h b/drivers/net/wireless/bcm43xx/bcm43xx_phy.h
new file mode 100644
index 0000000..1f321ef
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.h
@@ -0,0 +1,74 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#ifndef BCM43xx_PHY_H_
+#define BCM43xx_PHY_H_
+
+#include <linux/types.h>
+
+struct bcm43xx_private;
+
+void bcm43xx_raw_phy_lock(struct bcm43xx_private *bcm);
+#define bcm43xx_phy_lock(bcm, flags) \
+ do { \
+ local_irq_save(flags); \
+ bcm43xx_raw_phy_lock(bcm); \
+ } while (0)
+void bcm43xx_raw_phy_unlock(struct bcm43xx_private *bcm);
+#define bcm43xx_phy_unlock(bcm, flags) \
+ do { \
+ bcm43xx_raw_phy_unlock(bcm); \
+ local_irq_restore(flags); \
+ } while (0)
+
+u16 bcm43xx_phy_read(struct bcm43xx_private *bcm, u16 offset);
+void bcm43xx_phy_write(struct bcm43xx_private *bcm, u16 offset, u16 val);
+
+int bcm43xx_phy_init_tssi2dbm_table(struct bcm43xx_private *bcm);
+int bcm43xx_phy_init(struct bcm43xx_private *bcm);
+
+void bcm43xx_phy_set_antenna_diversity(struct bcm43xx_private *bcm);
+void bcm43xx_phy_calibrate(struct bcm43xx_private *bcm);
+int bcm43xx_phy_connect(struct bcm43xx_private *bcm, int connect);
+
+void bcm43xx_phy_lo_b_measure(struct bcm43xx_private *bcm);
+void bcm43xx_phy_lo_g_measure(struct bcm43xx_private *bcm);
+void bcm43xx_phy_xmitpower(struct bcm43xx_private *bcm);
+
+/* Adjust the LocalOscillator to the saved values.
+ * "fixed" is only set to 1 once in initialization. Set to 0 otherwise.
+ */
+void bcm43xx_phy_lo_adjust(struct bcm43xx_private *bcm, int fixed);
+void bcm43xx_phy_lo_mark_all_unused(struct bcm43xx_private *bcm);
+
+void bcm43xx_phy_set_baseband_attenuation(struct bcm43xx_private *bcm,
+ u16 baseband_attenuation);
+
+#endif /* BCM43xx_PHY_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
new file mode 100644
index 0000000..c59ddd4
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
@@ -0,0 +1,606 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ PIO Transmission
+
+ Copyright (c) 2005 Michael Buesch <mbuesch@freenet.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx.h"
+#include "bcm43xx_pio.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_xmit.h"
+
+#include <linux/delay.h>
+
+
+static void tx_start(struct bcm43xx_pioqueue *queue)
+{
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_INIT);
+}
+
+static void tx_octet(struct bcm43xx_pioqueue *queue,
+ u8 octet)
+{
+ if (queue->need_workarounds) {
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
+ octet);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_WRITEHI);
+ } else {
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_WRITEHI);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
+ octet);
+ }
+}
+
+static u16 tx_get_next_word(struct bcm43xx_txhdr *txhdr,
+ const u8 *packet,
+ unsigned int *pos)
+{
+ const u8 *source;
+ unsigned int i = *pos;
+ u16 ret;
+
+ if (i < sizeof(*txhdr)) {
+ source = (const u8 *)txhdr;
+ } else {
+ source = packet;
+ i -= sizeof(*txhdr);
+ }
+ ret = le16_to_cpu( *((u16 *)(source + i)) );
+ *pos += 2;
+
+ return ret;
+}
+
+static void tx_data(struct bcm43xx_pioqueue *queue,
+ struct bcm43xx_txhdr *txhdr,
+ const u8 *packet,
+ unsigned int octets)
+{
+ u16 data;
+ unsigned int i = 0;
+
+ if (queue->need_workarounds) {
+ data = tx_get_next_word(txhdr, packet, &i);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA, data);
+ }
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_WRITELO |
+ BCM43xx_PIO_TXCTL_WRITEHI);
+ while (i < octets - 1) {
+ data = tx_get_next_word(txhdr, packet, &i);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA, data);
+ }
+ if (octets % 2)
+ tx_octet(queue, packet[octets - sizeof(*txhdr) - 1]);
+}
+
+static void tx_complete(struct bcm43xx_pioqueue *queue,
+ struct sk_buff *skb)
+{
+ if (queue->need_workarounds) {
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
+ skb->data[skb->len - 1]);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_WRITEHI |
+ BCM43xx_PIO_TXCTL_COMPLETE);
+ } else {
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ BCM43xx_PIO_TXCTL_COMPLETE);
+ }
+}
+
+static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
+ int packetindex)
+{
+ u16 cookie = 0x0000;
+
+ /* We use the upper 4 bits for the PIO
+ * controller ID and the lower 12 bits
+ * for the packet index (in the cache).
+ */
+ switch (queue->mmio_base) {
+ case BCM43xx_MMIO_PIO1_BASE:
+ break;
+ case BCM43xx_MMIO_PIO2_BASE:
+ cookie = 0x1000;
+ break;
+ case BCM43xx_MMIO_PIO3_BASE:
+ cookie = 0x2000;
+ break;
+ case BCM43xx_MMIO_PIO4_BASE:
+ cookie = 0x3000;
+ break;
+ default:
+ assert(0);
+ }
+ assert(((u16)packetindex & 0xF000) == 0x0000);
+ cookie |= (u16)packetindex;
+
+ return cookie;
+}
+
+static
+struct bcm43xx_pioqueue * parse_cookie(struct bcm43xx_private *bcm,
+ u16 cookie,
+ struct bcm43xx_pio_txpacket **packet)
+{
+ struct bcm43xx_pio *pio = bcm43xx_current_pio(bcm);
+ struct bcm43xx_pioqueue *queue = NULL;
+ int packetindex;
+
+ switch (cookie & 0xF000) {
+ case 0x0000:
+ queue = pio->queue0;
+ break;
+ case 0x1000:
+ queue = pio->queue1;
+ break;
+ case 0x2000:
+ queue = pio->queue2;
+ break;
+ case 0x3000:
+ queue = pio->queue3;
+ break;
+ default:
+ assert(0);
+ }
+ packetindex = (cookie & 0x0FFF);
+ assert(packetindex >= 0 && packetindex < BCM43xx_PIO_MAXTXPACKETS);
+ *packet = &(queue->tx_packets_cache[packetindex]);
+
+ return queue;
+}
+
+static void pio_tx_write_fragment(struct bcm43xx_pioqueue *queue,
+ struct sk_buff *skb,
+ struct bcm43xx_pio_txpacket *packet)
+{
+ struct bcm43xx_txhdr txhdr;
+ unsigned int octets;
+
+ assert(skb_shinfo(skb)->nr_frags == 0);
+ bcm43xx_generate_txhdr(queue->bcm,
+ &txhdr, skb->data, skb->len,
+ (packet->xmitted_frags == 0),
+ generate_cookie(queue, pio_txpacket_getindex(packet)));
+
+ tx_start(queue);
+ octets = skb->len + sizeof(txhdr);
+ if (queue->need_workarounds)
+ octets--;
+ tx_data(queue, &txhdr, (u8 *)skb->data, octets);
+ tx_complete(queue, skb);
+}
+
+static void free_txpacket(struct bcm43xx_pio_txpacket *packet,
+ int irq_context)
+{
+ struct bcm43xx_pioqueue *queue = packet->queue;
+
+ ieee80211_txb_free(packet->txb);
+ list_move(&packet->list, &queue->txfree);
+ queue->nr_txfree++;
+
+ assert(queue->tx_devq_used >= packet->xmitted_octets);
+ assert(queue->tx_devq_packets >= packet->xmitted_frags);
+ queue->tx_devq_used -= packet->xmitted_octets;
+ queue->tx_devq_packets -= packet->xmitted_frags;
+}
+
+static int pio_tx_packet(struct bcm43xx_pio_txpacket *packet)
+{
+ struct bcm43xx_pioqueue *queue = packet->queue;
+ struct ieee80211_txb *txb = packet->txb;
+ struct sk_buff *skb;
+ u16 octets;
+ int i;
+
+ for (i = packet->xmitted_frags; i < txb->nr_frags; i++) {
+ skb = txb->fragments[i];
+
+ octets = (u16)skb->len + sizeof(struct bcm43xx_txhdr);
+ assert(queue->tx_devq_size >= octets);
+ assert(queue->tx_devq_packets <= BCM43xx_PIO_MAXTXDEVQPACKETS);
+ assert(queue->tx_devq_used <= queue->tx_devq_size);
+ /* Check if there is sufficient free space on the device
+ * TX queue. If not, return and let the TX tasklet
+ * retry later.
+ */
+ if (queue->tx_devq_packets == BCM43xx_PIO_MAXTXDEVQPACKETS)
+ return -EBUSY;
+ if (queue->tx_devq_used + octets > queue->tx_devq_size)
+ return -EBUSY;
+ /* Now poke the device. */
+ pio_tx_write_fragment(queue, skb, packet);
+
+ /* Account for the packet size.
+ * (We must not overflow the device TX queue)
+ */
+ queue->tx_devq_packets++;
+ queue->tx_devq_used += octets;
+
+ assert(packet->xmitted_frags <= packet->txb->nr_frags);
+ packet->xmitted_frags++;
+ packet->xmitted_octets += octets;
+ }
+ list_move_tail(&packet->list, &queue->txrunning);
+
+ return 0;
+}
+
+static void tx_tasklet(unsigned long d)
+{
+ struct bcm43xx_pioqueue *queue = (struct bcm43xx_pioqueue *)d;
+ struct bcm43xx_private *bcm = queue->bcm;
+ unsigned long flags;
+ struct bcm43xx_pio_txpacket *packet, *tmp_packet;
+ int err;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list) {
+ assert(packet->xmitted_frags < packet->txb->nr_frags);
+ if (packet->xmitted_frags == 0) {
+ int i;
+ struct sk_buff *skb;
+
+ /* Check if the device queue is big
+ * enough for every fragment. If not, drop the
+ * whole packet.
+ */
+ for (i = 0; i < packet->txb->nr_frags; i++) {
+ skb = packet->txb->fragments[i];
+ if (unlikely(skb->len > queue->tx_devq_size)) {
+ dprintkl(KERN_ERR PFX "PIO TX device queue too small. "
+ "Dropping packet.\n");
+ free_txpacket(packet, 1);
+ goto next_packet;
+ }
+ }
+ }
+ /* Try to transmit the packet.
+ * This may not completely succeed.
+ */
+ err = pio_tx_packet(packet);
+ if (err)
+ break;
+ next_packet:
+ continue;
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+}
+
+static void setup_txqueues(struct bcm43xx_pioqueue *queue)
+{
+ struct bcm43xx_pio_txpacket *packet;
+ int i;
+
+ queue->nr_txfree = BCM43xx_PIO_MAXTXPACKETS;
+ for (i = 0; i < BCM43xx_PIO_MAXTXPACKETS; i++) {
+ packet = &(queue->tx_packets_cache[i]);
+
+ packet->queue = queue;
+ INIT_LIST_HEAD(&packet->list);
+
+ list_add(&packet->list, &queue->txfree);
+ }
+}
+
+static
+struct bcm43xx_pioqueue * bcm43xx_setup_pioqueue(struct bcm43xx_private *bcm,
+ u16 pio_mmio_base)
+{
+ struct bcm43xx_pioqueue *queue;
+ u32 value;
+ u16 qsize;
+
+ queue = kzalloc(sizeof(*queue), GFP_KERNEL);
+ if (!queue)
+ goto out;
+
+ queue->bcm = bcm;
+ queue->mmio_base = pio_mmio_base;
+ queue->need_workarounds = (bcm->current_core->rev < 3);
+
+ INIT_LIST_HEAD(&queue->txfree);
+ INIT_LIST_HEAD(&queue->txqueue);
+ INIT_LIST_HEAD(&queue->txrunning);
+ tasklet_init(&queue->txtask, tx_tasklet,
+ (unsigned long)queue);
+
+ value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ value |= BCM43xx_SBF_XFER_REG_BYTESWAP;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value);
+
+ qsize = bcm43xx_read16(bcm, queue->mmio_base + BCM43xx_PIO_TXQBUFSIZE);
+ if (qsize <= BCM43xx_PIO_TXQADJUST) {
+ printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", qsize);
+ goto err_freequeue;
+ }
+ qsize -= BCM43xx_PIO_TXQADJUST;
+ queue->tx_devq_size = qsize;
+
+ setup_txqueues(queue);
+
+out:
+ return queue;
+
+err_freequeue:
+ kfree(queue);
+ queue = NULL;
+ goto out;
+}
+
+static void cancel_transfers(struct bcm43xx_pioqueue *queue)
+{
+ struct bcm43xx_pio_txpacket *packet, *tmp_packet;
+
+ netif_tx_disable(queue->bcm->net_dev);
+ assert(queue->bcm->shutting_down);
+ tasklet_disable(&queue->txtask);
+
+ list_for_each_entry_safe(packet, tmp_packet, &queue->txrunning, list)
+ free_txpacket(packet, 0);
+ list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list)
+ free_txpacket(packet, 0);
+}
+
+static void bcm43xx_destroy_pioqueue(struct bcm43xx_pioqueue *queue)
+{
+ if (!queue)
+ return;
+
+ cancel_transfers(queue);
+ kfree(queue);
+}
+
+void bcm43xx_pio_free(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_pio *pio;
+
+ if (!bcm43xx_using_pio(bcm))
+ return;
+ pio = bcm43xx_current_pio(bcm);
+
+ bcm43xx_destroy_pioqueue(pio->queue3);
+ pio->queue3 = NULL;
+ bcm43xx_destroy_pioqueue(pio->queue2);
+ pio->queue2 = NULL;
+ bcm43xx_destroy_pioqueue(pio->queue1);
+ pio->queue1 = NULL;
+ bcm43xx_destroy_pioqueue(pio->queue0);
+ pio->queue0 = NULL;
+}
+
+int bcm43xx_pio_init(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_pio *pio = bcm43xx_current_pio(bcm);
+ struct bcm43xx_pioqueue *queue;
+ int err = -ENOMEM;
+
+ queue = bcm43xx_setup_pioqueue(bcm, BCM43xx_MMIO_PIO1_BASE);
+ if (!queue)
+ goto out;
+ pio->queue0 = queue;
+
+ queue = bcm43xx_setup_pioqueue(bcm, BCM43xx_MMIO_PIO2_BASE);
+ if (!queue)
+ goto err_destroy0;
+ pio->queue1 = queue;
+
+ queue = bcm43xx_setup_pioqueue(bcm, BCM43xx_MMIO_PIO3_BASE);
+ if (!queue)
+ goto err_destroy1;
+ pio->queue2 = queue;
+
+ queue = bcm43xx_setup_pioqueue(bcm, BCM43xx_MMIO_PIO4_BASE);
+ if (!queue)
+ goto err_destroy2;
+ pio->queue3 = queue;
+
+ if (bcm->current_core->rev < 3)
+ bcm->irq_savedstate |= BCM43xx_IRQ_PIO_WORKAROUND;
+
+ dprintk(KERN_INFO PFX "PIO initialized\n");
+ err = 0;
+out:
+ return err;
+
+err_destroy2:
+ bcm43xx_destroy_pioqueue(pio->queue2);
+ pio->queue2 = NULL;
+err_destroy1:
+ bcm43xx_destroy_pioqueue(pio->queue1);
+ pio->queue1 = NULL;
+err_destroy0:
+ bcm43xx_destroy_pioqueue(pio->queue0);
+ pio->queue0 = NULL;
+ goto out;
+}
+
+int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb)
+{
+ struct bcm43xx_pioqueue *queue = bcm43xx_current_pio(bcm)->queue1;
+ struct bcm43xx_pio_txpacket *packet;
+ u16 tmp;
+
+ assert(!queue->tx_suspended);
+ assert(!list_empty(&queue->txfree));
+
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
+ if (tmp & BCM43xx_PIO_TXCTL_SUSPEND)
+ return -EBUSY;
+
+ packet = list_entry(queue->txfree.next, struct bcm43xx_pio_txpacket, list);
+ packet->txb = txb;
+ packet->xmitted_frags = 0;
+ packet->xmitted_octets = 0;
+ list_move_tail(&packet->list, &queue->txqueue);
+ queue->nr_txfree--;
+ assert(queue->nr_txfree < BCM43xx_PIO_MAXTXPACKETS);
+
+ /* Suspend TX, if we are out of packets in the "free" queue. */
+ if (unlikely(list_empty(&queue->txfree))) {
+ netif_stop_queue(queue->bcm->net_dev);
+ queue->tx_suspended = 1;
+ }
+
+ tasklet_schedule(&queue->txtask);
+
+ return 0;
+}
+
+void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status)
+{
+ struct bcm43xx_pioqueue *queue;
+ struct bcm43xx_pio_txpacket *packet;
+
+ queue = parse_cookie(bcm, status->cookie, &packet);
+ assert(queue);
+//TODO
+if (!queue)
+return;
+ free_txpacket(packet, 1);
+ if (unlikely(queue->tx_suspended)) {
+ queue->tx_suspended = 0;
+ netif_wake_queue(queue->bcm->net_dev);
+ }
+ /* If there are packets on the txqueue, poke the tasklet. */
+ if (!list_empty(&queue->txqueue))
+ tasklet_schedule(&queue->txtask);
+}
+
+static void pio_rx_error(struct bcm43xx_pioqueue *queue,
+ int clear_buffers,
+ const char *error)
+{
+ int i;
+
+ printkl("PIO RX error: %s\n", error);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL,
+ BCM43xx_PIO_RXCTL_READY);
+ if (clear_buffers) {
+ assert(queue->mmio_base == BCM43xx_MMIO_PIO1_BASE);
+ for (i = 0; i < 15; i++) {
+ /* Dummy read. */
+ bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+ }
+ }
+}
+
+void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
+{
+ u16 preamble[21] = { 0 };
+ struct bcm43xx_rxhdr *rxhdr;
+ u16 tmp, len, rxflags2;
+ int i, preamble_readwords;
+ struct sk_buff *skb;
+
+return;
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL);
+ if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) {
+ dprintkl(KERN_ERR PFX "PIO RX: No data available\n");//TODO: remove this printk.
+ return;
+ }
+ bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL,
+ BCM43xx_PIO_RXCTL_DATAAVAILABLE);
+
+ for (i = 0; i < 10; i++) {
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL);
+ if (tmp & BCM43xx_PIO_RXCTL_READY)
+ goto data_ready;
+ udelay(10);
+ }
+ dprintkl(KERN_ERR PFX "PIO RX timed out\n");
+ return;
+data_ready:
+
+//FIXME: endianess in this function.
+ len = le16_to_cpu(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
+ if (unlikely(len > 0x700)) {
+ pio_rx_error(queue, 0, "len > 0x700");
+ return;
+ }
+ if (unlikely(len == 0 && queue->mmio_base != BCM43xx_MMIO_PIO4_BASE)) {
+ pio_rx_error(queue, 0, "len == 0");
+ return;
+ }
+ preamble[0] = cpu_to_le16(len);
+ if (queue->mmio_base == BCM43xx_MMIO_PIO4_BASE)
+ preamble_readwords = 14 / sizeof(u16);
+ else
+ preamble_readwords = 18 / sizeof(u16);
+ for (i = 0; i < preamble_readwords; i++) {
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+ preamble[i + 1] = cpu_to_be16(tmp);//FIXME?
+ }
+ rxhdr = (struct bcm43xx_rxhdr *)preamble;
+ rxflags2 = le16_to_cpu(rxhdr->flags2);
+ if (unlikely(rxflags2 & BCM43xx_RXHDR_FLAGS2_INVALIDFRAME)) {
+ pio_rx_error(queue,
+ (queue->mmio_base == BCM43xx_MMIO_PIO1_BASE),
+ "invalid frame");
+ return;
+ }
+ if (queue->mmio_base == BCM43xx_MMIO_PIO4_BASE) {
+ /* We received an xmit status. */
+ struct bcm43xx_hwxmitstatus *hw;
+ struct bcm43xx_xmitstatus stat;
+
+ hw = (struct bcm43xx_hwxmitstatus *)(preamble + 1);
+ stat.cookie = le16_to_cpu(hw->cookie);
+ stat.flags = hw->flags;
+ stat.cnt1 = hw->cnt1;
+ stat.cnt2 = hw->cnt2;
+ stat.seq = le16_to_cpu(hw->seq);
+ stat.unknown = le16_to_cpu(hw->unknown);
+
+ bcm43xx_debugfs_log_txstat(queue->bcm, &stat);
+ bcm43xx_pio_handle_xmitstatus(queue->bcm, &stat);
+
+ return;
+ }
+
+ skb = dev_alloc_skb(len);
+ if (unlikely(!skb)) {
+ pio_rx_error(queue, 1, "OOM");
+ return;
+ }
+ skb_put(skb, len);
+ for (i = 0; i < len - 1; i += 2) {
+ tmp = cpu_to_be16(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
+ *((u16 *)(skb->data + i)) = tmp;
+ }
+ if (len % 2) {
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+ skb->data[len - 1] = (tmp & 0x00FF);
+ if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME)
+ skb->data[0x20] = (tmp & 0xFF00) >> 8;
+ else
+ skb->data[0x1E] = (tmp & 0xFF00) >> 8;
+ }
+ bcm43xx_rx(queue->bcm, skb, rxhdr);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
new file mode 100644
index 0000000..970627b
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
@@ -0,0 +1,138 @@
+#ifndef BCM43xx_PIO_H_
+#define BCM43xx_PIO_H_
+
+#include "bcm43xx.h"
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+
+
+#define BCM43xx_PIO_TXCTL 0x00
+#define BCM43xx_PIO_TXDATA 0x02
+#define BCM43xx_PIO_TXQBUFSIZE 0x04
+#define BCM43xx_PIO_RXCTL 0x08
+#define BCM43xx_PIO_RXDATA 0x0A
+
+#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 0)
+#define BCM43xx_PIO_TXCTL_WRITELO (1 << 1)
+#define BCM43xx_PIO_TXCTL_COMPLETE (1 << 2)
+#define BCM43xx_PIO_TXCTL_INIT (1 << 3)
+#define BCM43xx_PIO_TXCTL_SUSPEND (1 << 7)
+
+#define BCM43xx_PIO_RXCTL_DATAAVAILABLE (1 << 0)
+#define BCM43xx_PIO_RXCTL_READY (1 << 1)
+
+/* PIO constants */
+#define BCM43xx_PIO_MAXTXDEVQPACKETS 31
+#define BCM43xx_PIO_TXQADJUST 80
+
+/* PIO tuning knobs */
+#define BCM43xx_PIO_MAXTXPACKETS 256
+
+
+
+#ifdef CONFIG_BCM43XX_PIO
+
+
+struct bcm43xx_pioqueue;
+struct bcm43xx_xmitstatus;
+
+struct bcm43xx_pio_txpacket {
+ struct bcm43xx_pioqueue *queue;
+ struct ieee80211_txb *txb;
+ struct list_head list;
+
+ u8 xmitted_frags;
+ u16 xmitted_octets;
+};
+
+#define pio_txpacket_getindex(packet) ((int)((packet) - (packet)->queue->tx_packets_cache))
+
+struct bcm43xx_pioqueue {
+ struct bcm43xx_private *bcm;
+ u16 mmio_base;
+
+ u8 tx_suspended:1,
+ need_workarounds:1; /* Workarounds needed for core.rev < 3 */
+
+ /* Adjusted size of the device internal TX buffer. */
+ u16 tx_devq_size;
+ /* Used octets of the device internal TX buffer. */
+ u16 tx_devq_used;
+ /* Used packet slots in the device internal TX buffer. */
+ u8 tx_devq_packets;
+ /* Packets from the txfree list can
+ * be taken on incoming TX requests.
+ */
+ struct list_head txfree;
+ unsigned int nr_txfree;
+ /* Packets on the txqueue are queued,
+ * but not completely written to the chip, yet.
+ */
+ struct list_head txqueue;
+ /* Packets on the txrunning queue are completely
+ * posted to the device. We are waiting for the txstatus.
+ */
+ struct list_head txrunning;
+ /* Total number or packets sent.
+ * (This counter can obviously wrap).
+ */
+ unsigned int nr_tx_packets;
+ struct tasklet_struct txtask;
+ struct bcm43xx_pio_txpacket tx_packets_cache[BCM43xx_PIO_MAXTXPACKETS];
+};
+
+static inline
+u16 bcm43xx_pio_read(struct bcm43xx_pioqueue *queue,
+ u16 offset)
+{
+ return bcm43xx_read16(queue->bcm, queue->mmio_base + offset);
+}
+
+static inline
+void bcm43xx_pio_write(struct bcm43xx_pioqueue *queue,
+ u16 offset, u16 value)
+{
+ bcm43xx_write16(queue->bcm, queue->mmio_base + offset, value);
+}
+
+
+int bcm43xx_pio_init(struct bcm43xx_private *bcm);
+void bcm43xx_pio_free(struct bcm43xx_private *bcm);
+
+int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb);
+void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status);
+void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue);
+
+#else /* CONFIG_BCM43XX_PIO */
+
+static inline
+int bcm43xx_pio_init(struct bcm43xx_private *bcm)
+{
+ return 0;
+}
+static inline
+void bcm43xx_pio_free(struct bcm43xx_private *bcm)
+{
+}
+static inline
+int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
+ struct ieee80211_txb *txb)
+{
+ return 0;
+}
+static inline
+void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
+ struct bcm43xx_xmitstatus *status)
+{
+}
+static inline
+void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
+{
+}
+
+#endif /* CONFIG_BCM43XX_PIO */
+#endif /* BCM43xx_PIO_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.c b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
new file mode 100644
index 0000000..3c92b62
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
@@ -0,0 +1,358 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/delay.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_power.h"
+#include "bcm43xx_main.h"
+
+
+/* Get max/min slowclock frequency
+ * as described in http://bcm-specs.sipsolutions.net/PowerControl
+ */
+static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
+ int get_max)
+{
+ int limit = 0;
+ int divisor;
+ int selection;
+ int err;
+ u32 tmp;
+ struct bcm43xx_coreinfo *old_core;
+
+ if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
+ goto out;
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err)
+ goto out;
+
+ if (bcm->current_core->rev < 6) {
+ if ((bcm->bustype == BCM43xx_BUSTYPE_PCMCIA) ||
+ (bcm->bustype == BCM43xx_BUSTYPE_SB)) {
+ selection = 1;
+ divisor = 32;
+ } else {
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
+ if (err) {
+ printk(KERN_ERR PFX "clockfreqlimit pcicfg read failure\n");
+ goto out_switchback;
+ }
+ if (tmp & 0x10) {
+ /* PCI */
+ selection = 2;
+ divisor = 64;
+ } else {
+ /* XTAL */
+ selection = 1;
+ divisor = 32;
+ }
+ }
+ } else if (bcm->current_core->rev < 10) {
+ selection = (tmp & 0x07);
+ if (selection) {
+ tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+ divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
+ } else
+ divisor = 1;
+ } else {
+ tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL);
+ divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
+ selection = 1;
+ }
+
+ switch (selection) {
+ case 0:
+ /* LPO */
+ if (get_max)
+ limit = 43000;
+ else
+ limit = 25000;
+ break;
+ case 1:
+ /* XTAL */
+ if (get_max)
+ limit = 20200000;
+ else
+ limit = 19800000;
+ break;
+ case 2:
+ /* PCI */
+ if (get_max)
+ limit = 34000000;
+ else
+ limit = 25000000;
+ break;
+ default:
+ assert(0);
+ }
+ limit /= divisor;
+
+out_switchback:
+ err = bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+
+out:
+ return limit;
+}
+
+/* init power control
+ * as described in http://bcm-specs.sipsolutions.net/PowerControl
+ */
+int bcm43xx_pctl_init(struct bcm43xx_private *bcm)
+{
+ int err, maxfreq;
+ struct bcm43xx_coreinfo *old_core;
+
+ if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
+ return 0;
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err == -ENODEV)
+ return 0;
+ if (err)
+ goto out;
+
+ maxfreq = bcm43xx_pctl_clockfreqlimit(bcm, 1);
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY,
+ (maxfreq * 150 + 999999) / 1000000);
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_FREFSELDELAY,
+ (maxfreq * 15 + 999999) / 1000000);
+
+ err = bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+
+out:
+ return err;
+}
+
+u16 bcm43xx_pctl_powerup_delay(struct bcm43xx_private *bcm)
+{
+ u16 delay = 0;
+ int err;
+ u32 pll_on_delay;
+ struct bcm43xx_coreinfo *old_core;
+ int minfreq;
+
+ if (bcm->bustype != BCM43xx_BUSTYPE_PCI)
+ goto out;
+ if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
+ goto out;
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err == -ENODEV)
+ goto out;
+
+ minfreq = bcm43xx_pctl_clockfreqlimit(bcm, 0);
+ pll_on_delay = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_PLLONDELAY);
+ delay = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
+
+ err = bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+
+out:
+ return delay;
+}
+
+/* set the powercontrol clock
+ * as described in http://bcm-specs.sipsolutions.net/PowerControl
+ */
+int bcm43xx_pctl_set_clock(struct bcm43xx_private *bcm, u16 mode)
+{
+ int err;
+ struct bcm43xx_coreinfo *old_core;
+ u32 tmp;
+
+ old_core = bcm->current_core;
+ err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ if (err == -ENODEV)
+ return 0;
+ if (err)
+ goto out;
+
+ if (bcm->core_chipcommon.rev < 6) {
+ if (mode == BCM43xx_PCTL_CLK_FAST) {
+ err = bcm43xx_pctl_set_crystal(bcm, 1);
+ if (err)
+ goto out;
+ }
+ } else {
+ if ((bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL) &&
+ (bcm->core_chipcommon.rev < 10)) {
+ switch (mode) {
+ case BCM43xx_PCTL_CLK_FAST:
+ tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+ tmp = (tmp & ~BCM43xx_PCTL_FORCE_SLOW) | BCM43xx_PCTL_FORCE_PLL;
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
+ break;
+ case BCM43xx_PCTL_CLK_SLOW:
+ tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+ tmp |= BCM43xx_PCTL_FORCE_SLOW;
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
+ break;
+ case BCM43xx_PCTL_CLK_DYNAMIC:
+ tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+ tmp &= ~BCM43xx_PCTL_FORCE_SLOW;
+ tmp |= BCM43xx_PCTL_FORCE_PLL;
+ tmp &= ~BCM43xx_PCTL_DYN_XTAL;
+ bcm43xx_write32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL, tmp);
+ }
+ }
+ }
+
+ err = bcm43xx_switch_core(bcm, old_core);
+ assert(err == 0);
+
+out:
+ return err;
+}
+
+int bcm43xx_pctl_set_crystal(struct bcm43xx_private *bcm, int on)
+{
+ int err;
+ u32 in, out, outenable;
+
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_IN, &in);
+ if (err)
+ goto err_pci;
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &out);
+ if (err)
+ goto err_pci;
+ err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUTENABLE, &outenable);
+ if (err)
+ goto err_pci;
+
+ outenable |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN);
+
+ if (on) {
+ if (in & 0x40)
+ return 0;
+
+ out |= (BCM43xx_PCTL_XTAL_POWERUP | BCM43xx_PCTL_PLL_POWERDOWN);
+
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
+ if (err)
+ goto err_pci;
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable);
+ if (err)
+ goto err_pci;
+ udelay(1000);
+
+ out &= ~BCM43xx_PCTL_PLL_POWERDOWN;
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
+ if (err)
+ goto err_pci;
+ udelay(5000);
+ } else {
+ if (bcm->current_core->rev < 5)
+ return 0;
+ if (bcm->sprom.boardflags & BCM43xx_BFL_XTAL_NOSLOW)
+ return 0;
+
+/* XXX: Why BCM43xx_MMIO_RADIO_HWENABLED_xx can't be read at this time?
+ * err = bcm43xx_switch_core(bcm, bcm->active_80211_core);
+ * if (err)
+ * return err;
+ * if (((bcm->current_core->rev >= 3) &&
+ * (bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI) & (1 << 16))) ||
+ * ((bcm->current_core->rev < 3) &&
+ * !(bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO) & (1 << 4))))
+ * return 0;
+ * err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+ * if (err)
+ * return err;
+ */
+
+ err = bcm43xx_pctl_set_clock(bcm, BCM43xx_PCTL_CLK_SLOW);
+ if (err)
+ goto out;
+ out &= ~BCM43xx_PCTL_XTAL_POWERUP;
+ out |= BCM43xx_PCTL_PLL_POWERDOWN;
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUT, out);
+ if (err)
+ goto err_pci;
+ err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCTL_OUTENABLE, outenable);
+ if (err)
+ goto err_pci;
+ }
+
+out:
+ return err;
+
+err_pci:
+ printk(KERN_ERR PFX "Error: pctl_set_clock() could not access PCI config space!\n");
+ err = -EBUSY;
+ goto out;
+}
+
+/* Set the PowerSavingControlBits.
+ * Bitvalues:
+ * 0 => unset the bit
+ * 1 => set the bit
+ * -1 => calculate the bit
+ */
+void bcm43xx_power_saving_ctl_bits(struct bcm43xx_private *bcm,
+ int bit25, int bit26)
+{
+ int i;
+ u32 status;
+
+//FIXME: Force 25 to off and 26 to on for now:
+bit25 = 0;
+bit26 = 1;
+
+ if (bit25 == -1) {
+ //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
+ // and thus is not an AP and we are associated, set bit 25
+ }
+ if (bit26 == -1) {
+ //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
+ // or we are associated, or FIXME, or the latest PS-Poll packet sent was
+ // successful, set bit26
+ }
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ if (bit25)
+ status |= BCM43xx_SBF_PS1;
+ else
+ status &= ~BCM43xx_SBF_PS1;
+ if (bit26)
+ status |= BCM43xx_SBF_PS2;
+ else
+ status &= ~BCM43xx_SBF_PS2;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+ if (bit26 && bcm->current_core->rev >= 5) {
+ for (i = 0; i < 100; i++) {
+ if (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, 0x0040) != 4)
+ break;
+ udelay(10);
+ }
+ }
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.h b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
new file mode 100644
index 0000000..5f63640
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
@@ -0,0 +1,47 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#ifndef BCM43xx_POWER_H_
+#define BCM43xx_POWER_H_
+
+#include <linux/types.h>
+
+
+struct bcm43xx_private;
+
+int bcm43xx_pctl_init(struct bcm43xx_private *bcm);
+int bcm43xx_pctl_set_clock(struct bcm43xx_private *bcm, u16 mode);
+int bcm43xx_pctl_set_crystal(struct bcm43xx_private *bcm, int on);
+u16 bcm43xx_pctl_powerup_delay(struct bcm43xx_private *bcm);
+
+void bcm43xx_power_saving_ctl_bits(struct bcm43xx_private *bcm,
+ int bit25, int bit26);
+
+#endif /* BCM43xx_POWER_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
new file mode 100644
index 0000000..af5c0bf
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
@@ -0,0 +1,2026 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/delay.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_phy.h"
+#include "bcm43xx_radio.h"
+#include "bcm43xx_ilt.h"
+
+
+/* Table for bcm43xx_radio_calibrationvalue() */
+static const u16 rcc_table[16] = {
+ 0x0002, 0x0003, 0x0001, 0x000F,
+ 0x0006, 0x0007, 0x0005, 0x000F,
+ 0x000A, 0x000B, 0x0009, 0x000F,
+ 0x000E, 0x000F, 0x000D, 0x000F,
+};
+
+/* Reverse the bits of a 4bit value.
+ * Example: 1101 is flipped 1011
+ */
+static u16 flip_4bit(u16 value)
+{
+ u16 flipped = 0x0000;
+
+ assert((value & ~0x000F) == 0x0000);
+
+ flipped |= (value & 0x0001) << 3;
+ flipped |= (value & 0x0002) << 1;
+ flipped |= (value & 0x0004) >> 1;
+ flipped |= (value & 0x0008) >> 3;
+
+ return flipped;
+}
+
+/* Get the freq, as it has to be written to the device. */
+static inline
+u16 channel2freq_bg(u8 channel)
+{
+ /* Frequencies are given as frequencies_bg[index] + 2.4GHz
+ * Starting with channel 1
+ */
+ static const u16 frequencies_bg[14] = {
+ 12, 17, 22, 27,
+ 32, 37, 42, 47,
+ 52, 57, 62, 67,
+ 72, 84,
+ };
+
+ assert(channel >= 1 && channel <= 14);
+
+ return frequencies_bg[channel - 1];
+}
+
+/* Get the freq, as it has to be written to the device. */
+static inline
+u16 channel2freq_a(u8 channel)
+{
+ assert(channel <= 200);
+
+ return (5000 + 5 * channel);
+}
+
+void bcm43xx_radio_lock(struct bcm43xx_private *bcm)
+{
+ u32 status;
+
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ status |= BCM43xx_SBF_RADIOREG_LOCK;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+ mmiowb();
+ udelay(10);
+}
+
+void bcm43xx_radio_unlock(struct bcm43xx_private *bcm)
+{
+ u32 status;
+
+ bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_VER); /* dummy read */
+ status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
+ status &= ~BCM43xx_SBF_RADIOREG_LOCK;
+ bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
+ mmiowb();
+}
+
+u16 bcm43xx_radio_read16(struct bcm43xx_private *bcm, u16 offset)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ offset |= 0x0040;
+ break;
+ case BCM43xx_PHYTYPE_B:
+ if (radio->version == 0x2053) {
+ if (offset < 0x70)
+ offset += 0x80;
+ else if (offset < 0x80)
+ offset += 0x70;
+ } else if (radio->version == 0x2050) {
+ offset |= 0x80;
+ } else
+ assert(0);
+ break;
+ case BCM43xx_PHYTYPE_G:
+ offset |= 0x80;
+ break;
+ }
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, offset);
+ return bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_DATA_LOW);
+}
+
+void bcm43xx_radio_write16(struct bcm43xx_private *bcm, u16 offset, u16 val)
+{
+ bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_CONTROL, offset);
+ mmiowb();
+ bcm43xx_write16(bcm, BCM43xx_MMIO_RADIO_DATA_LOW, val);
+}
+
+static void bcm43xx_set_all_gains(struct bcm43xx_private *bcm,
+ s16 first, s16 second, s16 third)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 i;
+ u16 start = 0x08, end = 0x18;
+ u16 offset = 0x0400;
+ u16 tmp;
+
+ if (phy->rev <= 1) {
+ offset = 0x5000;
+ start = 0x10;
+ end = 0x20;
+ }
+
+ for (i = 0; i < 4; i++)
+ bcm43xx_ilt_write(bcm, offset + i, first);
+
+ for (i = start; i < end; i++)
+ bcm43xx_ilt_write(bcm, offset + i, second);
+
+ if (third != -1) {
+ tmp = ((u16)third << 14) | ((u16)third << 6);
+ bcm43xx_phy_write(bcm, 0x04A0,
+ (bcm43xx_phy_read(bcm, 0x04A0) & 0xBFBF) | tmp);
+ bcm43xx_phy_write(bcm, 0x04A1,
+ (bcm43xx_phy_read(bcm, 0x04A1) & 0xBFBF) | tmp);
+ bcm43xx_phy_write(bcm, 0x04A2,
+ (bcm43xx_phy_read(bcm, 0x04A2) & 0xBFBF) | tmp);
+ }
+ bcm43xx_dummy_transmission(bcm);
+}
+
+static void bcm43xx_set_original_gains(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 i, tmp;
+ u16 offset = 0x0400;
+ u16 start = 0x0008, end = 0x0018;
+
+ if (phy->rev <= 1) {
+ offset = 0x5000;
+ start = 0x0010;
+ end = 0x0020;
+ }
+
+ for (i = 0; i < 4; i++) {
+ tmp = (i & 0xFFFC);
+ tmp |= (i & 0x0001) << 1;
+ tmp |= (i & 0x0002) >> 1;
+
+ bcm43xx_ilt_write(bcm, offset + i, tmp);
+ }
+
+ for (i = start; i < end; i++)
+ bcm43xx_ilt_write(bcm, offset + i, i - start);
+
+ bcm43xx_phy_write(bcm, 0x04A0,
+ (bcm43xx_phy_read(bcm, 0x04A0) & 0xBFBF) | 0x4040);
+ bcm43xx_phy_write(bcm, 0x04A1,
+ (bcm43xx_phy_read(bcm, 0x04A1) & 0xBFBF) | 0x4040);
+ bcm43xx_phy_write(bcm, 0x04A2,
+ (bcm43xx_phy_read(bcm, 0x04A2) & 0xBFBF) | 0x4000);
+ bcm43xx_dummy_transmission(bcm);
+}
+
+/* Synthetic PU workaround */
+static void bcm43xx_synth_pu_workaround(struct bcm43xx_private *bcm, u8 channel)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ if (radio->version != 0x2050 || radio->revision >= 6) {
+ /* We do not need the workaround. */
+ return;
+ }
+
+ if (channel <= 10) {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL,
+ channel2freq_bg(channel + 4));
+ } else {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL,
+ channel2freq_bg(1));
+ }
+ udelay(100);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL,
+ channel2freq_bg(channel));
+}
+
+u8 bcm43xx_radio_aci_detect(struct bcm43xx_private *bcm, u8 channel)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u8 ret = 0;
+ u16 saved, rssi, temp;
+ int i, j = 0;
+
+ saved = bcm43xx_phy_read(bcm, 0x0403);
+ bcm43xx_radio_selectchannel(bcm, channel, 0);
+ bcm43xx_phy_write(bcm, 0x0403, (saved & 0xFFF8) | 5);
+ if (radio->aci_hw_rssi)
+ rssi = bcm43xx_phy_read(bcm, 0x048A) & 0x3F;
+ else
+ rssi = saved & 0x3F;
+ /* clamp temp to signed 5bit */
+ if (rssi > 32)
+ rssi -= 64;
+ for (i = 0;i < 100; i++) {
+ temp = (bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x3F;
+ if (temp > 32)
+ temp -= 64;
+ if (temp < rssi)
+ j++;
+ if (j >= 20)
+ ret = 1;
+ }
+ bcm43xx_phy_write(bcm, 0x0403, saved);
+
+ return ret;
+}
+
+u8 bcm43xx_radio_aci_scan(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u8 ret[13];
+ unsigned int channel = radio->channel;
+ unsigned int i, j, start, end;
+ unsigned long phylock_flags;
+
+ if (!((phy->type == BCM43xx_PHYTYPE_G) && (phy->rev > 0)))
+ return 0;
+
+ bcm43xx_phy_lock(bcm, phylock_flags);
+ bcm43xx_radio_lock(bcm);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) & 0xFFFC);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) & 0x7FFF);
+ bcm43xx_set_all_gains(bcm, 3, 8, 1);
+
+ start = (channel - 5 > 0) ? channel - 5 : 1;
+ end = (channel + 5 < 14) ? channel + 5 : 13;
+
+ for (i = start; i <= end; i++) {
+ if (abs(channel - i) > 2)
+ ret[i-1] = bcm43xx_radio_aci_detect(bcm, i);
+ }
+ bcm43xx_radio_selectchannel(bcm, channel, 0);
+ bcm43xx_phy_write(bcm, 0x0802,
+ (bcm43xx_phy_read(bcm, 0x0802) & 0xFFFC) | 0x0003);
+ bcm43xx_phy_write(bcm, 0x0403,
+ bcm43xx_phy_read(bcm, 0x0403) & 0xFFF8);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) | 0x8000);
+ bcm43xx_set_original_gains(bcm);
+ for (i = 0; i < 13; i++) {
+ if (!ret[i])
+ continue;
+ end = (i + 5 < 13) ? i + 5 : 13;
+ for (j = i; j < end; j++)
+ ret[j] = 1;
+ }
+ bcm43xx_radio_unlock(bcm);
+ bcm43xx_phy_unlock(bcm, phylock_flags);
+
+ return ret[channel - 1];
+}
+
+/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+void bcm43xx_nrssi_hw_write(struct bcm43xx_private *bcm, u16 offset, s16 val)
+{
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_NRSSILT_CTRL, offset);
+ mmiowb();
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_NRSSILT_DATA, (u16)val);
+}
+
+/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+s16 bcm43xx_nrssi_hw_read(struct bcm43xx_private *bcm, u16 offset)
+{
+ u16 val;
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_NRSSILT_CTRL, offset);
+ val = bcm43xx_phy_read(bcm, BCM43xx_PHY_NRSSILT_DATA);
+
+ return (s16)val;
+}
+
+/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+void bcm43xx_nrssi_hw_update(struct bcm43xx_private *bcm, u16 val)
+{
+ u16 i;
+ s16 tmp;
+
+ for (i = 0; i < 64; i++) {
+ tmp = bcm43xx_nrssi_hw_read(bcm, i);
+ tmp -= val;
+ tmp = limit_value(tmp, -32, 31);
+ bcm43xx_nrssi_hw_write(bcm, i, tmp);
+ }
+}
+
+/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+void bcm43xx_nrssi_mem_update(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ s16 i, delta;
+ s32 tmp;
+
+ delta = 0x1F - radio->nrssi[0];
+ for (i = 0; i < 64; i++) {
+ tmp = (i - delta) * radio->nrssislope;
+ tmp /= 0x10000;
+ tmp += 0x3A;
+ tmp = limit_value(tmp, 0, 0x3F);
+ radio->nrssi_lt[i] = tmp;
+ }
+}
+
+static void bcm43xx_calc_nrssi_offset(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ u16 backup[20] = { 0 };
+ s16 v47F;
+ u16 i;
+ u16 saved = 0xFFFF;
+
+ backup[0] = bcm43xx_phy_read(bcm, 0x0001);
+ backup[1] = bcm43xx_phy_read(bcm, 0x0811);
+ backup[2] = bcm43xx_phy_read(bcm, 0x0812);
+ backup[3] = bcm43xx_phy_read(bcm, 0x0814);
+ backup[4] = bcm43xx_phy_read(bcm, 0x0815);
+ backup[5] = bcm43xx_phy_read(bcm, 0x005A);
+ backup[6] = bcm43xx_phy_read(bcm, 0x0059);
+ backup[7] = bcm43xx_phy_read(bcm, 0x0058);
+ backup[8] = bcm43xx_phy_read(bcm, 0x000A);
+ backup[9] = bcm43xx_phy_read(bcm, 0x0003);
+ backup[10] = bcm43xx_radio_read16(bcm, 0x007A);
+ backup[11] = bcm43xx_radio_read16(bcm, 0x0043);
+
+ bcm43xx_phy_write(bcm, 0x0429,
+ bcm43xx_phy_read(bcm, 0x0429) & 0x7FFF);
+ bcm43xx_phy_write(bcm, 0x0001,
+ (bcm43xx_phy_read(bcm, 0x0001) & 0x3FFF) | 0x4000);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812) & 0xFFF3) | 0x0004);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) & ~(0x1 | 0x2));
+ if (phy->rev >= 6) {
+ backup[12] = bcm43xx_phy_read(bcm, 0x002E);
+ backup[13] = bcm43xx_phy_read(bcm, 0x002F);
+ backup[14] = bcm43xx_phy_read(bcm, 0x080F);
+ backup[15] = bcm43xx_phy_read(bcm, 0x0810);
+ backup[16] = bcm43xx_phy_read(bcm, 0x0801);
+ backup[17] = bcm43xx_phy_read(bcm, 0x0060);
+ backup[18] = bcm43xx_phy_read(bcm, 0x0014);
+ backup[19] = bcm43xx_phy_read(bcm, 0x0478);
+
+ bcm43xx_phy_write(bcm, 0x002E, 0);
+ bcm43xx_phy_write(bcm, 0x002F, 0);
+ bcm43xx_phy_write(bcm, 0x080F, 0);
+ bcm43xx_phy_write(bcm, 0x0810, 0);
+ bcm43xx_phy_write(bcm, 0x0478,
+ bcm43xx_phy_read(bcm, 0x0478) | 0x0100);
+ bcm43xx_phy_write(bcm, 0x0801,
+ bcm43xx_phy_read(bcm, 0x0801) | 0x0040);
+ bcm43xx_phy_write(bcm, 0x0060,
+ bcm43xx_phy_read(bcm, 0x0060) | 0x0040);
+ bcm43xx_phy_write(bcm, 0x0014,
+ bcm43xx_phy_read(bcm, 0x0014) | 0x0200);
+ }
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0070);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0080);
+ udelay(30);
+
+ v47F = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (v47F >= 0x20)
+ v47F -= 0x40;
+ if (v47F == 31) {
+ for (i = 7; i >= 4; i--) {
+ bcm43xx_radio_write16(bcm, 0x007B, i);
+ udelay(20);
+ v47F = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (v47F >= 0x20)
+ v47F -= 0x40;
+ if (v47F < 31 && saved == 0xFFFF)
+ saved = i;
+ }
+ if (saved == 0xFFFF)
+ saved = 4;
+ } else {
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) & 0x007F);
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) | 0x000C);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) | 0x0030);
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) | 0x0030);
+ bcm43xx_phy_write(bcm, 0x005A, 0x0480);
+ bcm43xx_phy_write(bcm, 0x0059, 0x0810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ if (phy->rev == 0) {
+ bcm43xx_phy_write(bcm, 0x0003, 0x0122);
+ } else {
+ bcm43xx_phy_write(bcm, 0x000A,
+ bcm43xx_phy_read(bcm, 0x000A)
+ | 0x2000);
+ }
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+ bcm43xx_phy_write(bcm, 0x0003,
+ (bcm43xx_phy_read(bcm, 0x0003) & 0xFF9F)
+ | 0x0040);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x000F);
+ bcm43xx_set_all_gains(bcm, 3, 0, 1);
+ bcm43xx_radio_write16(bcm, 0x0043,
+ (bcm43xx_radio_read16(bcm, 0x0043)
+ & 0x00F0) | 0x000F);
+ udelay(30);
+ v47F = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (v47F >= 0x20)
+ v47F -= 0x40;
+ if (v47F == -32) {
+ for (i = 0; i < 4; i++) {
+ bcm43xx_radio_write16(bcm, 0x007B, i);
+ udelay(20);
+ v47F = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (v47F >= 0x20)
+ v47F -= 0x40;
+ if (v47F > -31 && saved == 0xFFFF)
+ saved = i;
+ }
+ if (saved == 0xFFFF)
+ saved = 3;
+ } else
+ saved = 0;
+ }
+ bcm43xx_radio_write16(bcm, 0x007B, saved);
+
+ if (phy->rev >= 6) {
+ bcm43xx_phy_write(bcm, 0x002E, backup[12]);
+ bcm43xx_phy_write(bcm, 0x002F, backup[13]);
+ bcm43xx_phy_write(bcm, 0x080F, backup[14]);
+ bcm43xx_phy_write(bcm, 0x0810, backup[15]);
+ }
+ bcm43xx_phy_write(bcm, 0x0814, backup[3]);
+ bcm43xx_phy_write(bcm, 0x0815, backup[4]);
+ bcm43xx_phy_write(bcm, 0x005A, backup[5]);
+ bcm43xx_phy_write(bcm, 0x0059, backup[6]);
+ bcm43xx_phy_write(bcm, 0x0058, backup[7]);
+ bcm43xx_phy_write(bcm, 0x000A, backup[8]);
+ bcm43xx_phy_write(bcm, 0x0003, backup[9]);
+ bcm43xx_radio_write16(bcm, 0x0043, backup[11]);
+ bcm43xx_radio_write16(bcm, 0x007A, backup[10]);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) | 0x1 | 0x2);
+ bcm43xx_phy_write(bcm, 0x0429,
+ bcm43xx_phy_read(bcm, 0x0429) | 0x8000);
+ bcm43xx_set_original_gains(bcm);
+ if (phy->rev >= 6) {
+ bcm43xx_phy_write(bcm, 0x0801, backup[16]);
+ bcm43xx_phy_write(bcm, 0x0060, backup[17]);
+ bcm43xx_phy_write(bcm, 0x0014, backup[18]);
+ bcm43xx_phy_write(bcm, 0x0478, backup[19]);
+ }
+ bcm43xx_phy_write(bcm, 0x0001, backup[0]);
+ bcm43xx_phy_write(bcm, 0x0812, backup[2]);
+ bcm43xx_phy_write(bcm, 0x0811, backup[1]);
+}
+
+void bcm43xx_calc_nrssi_slope(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 backup[18] = { 0 };
+ u16 tmp;
+ s16 nrssi0, nrssi1;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_B:
+ backup[0] = bcm43xx_radio_read16(bcm, 0x007A);
+ backup[1] = bcm43xx_radio_read16(bcm, 0x0052);
+ backup[2] = bcm43xx_radio_read16(bcm, 0x0043);
+ backup[3] = bcm43xx_phy_read(bcm, 0x0030);
+ backup[4] = bcm43xx_phy_read(bcm, 0x0026);
+ backup[5] = bcm43xx_phy_read(bcm, 0x0015);
+ backup[6] = bcm43xx_phy_read(bcm, 0x002A);
+ backup[7] = bcm43xx_phy_read(bcm, 0x0020);
+ backup[8] = bcm43xx_phy_read(bcm, 0x005A);
+ backup[9] = bcm43xx_phy_read(bcm, 0x0059);
+ backup[10] = bcm43xx_phy_read(bcm, 0x0058);
+ backup[11] = bcm43xx_read16(bcm, 0x03E2);
+ backup[12] = bcm43xx_read16(bcm, 0x03E6);
+ backup[13] = bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT);
+
+ tmp = bcm43xx_radio_read16(bcm, 0x007A);
+ tmp &= (phy->rev >= 5) ? 0x007F : 0x000F;
+ bcm43xx_radio_write16(bcm, 0x007A, tmp);
+ bcm43xx_phy_write(bcm, 0x0030, 0x00FF);
+ bcm43xx_write16(bcm, 0x03EC, 0x7F7F);
+ bcm43xx_phy_write(bcm, 0x0026, 0x0000);
+ bcm43xx_phy_write(bcm, 0x0015,
+ bcm43xx_phy_read(bcm, 0x0015) | 0x0020);
+ bcm43xx_phy_write(bcm, 0x002A, 0x08A3);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0080);
+
+ nrssi0 = (s16)bcm43xx_phy_read(bcm, 0x0027);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) & 0x007F);
+ if (phy->rev >= 2) {
+ bcm43xx_write16(bcm, 0x03E6, 0x0040);
+ } else if (phy->rev == 0) {
+ bcm43xx_write16(bcm, 0x03E6, 0x0122);
+ } else {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT) & 0x2000);
+ }
+ bcm43xx_phy_write(bcm, 0x0020, 0x3F3F);
+ bcm43xx_phy_write(bcm, 0x0015, 0xF330);
+ bcm43xx_radio_write16(bcm, 0x005A, 0x0060);
+ bcm43xx_radio_write16(bcm, 0x0043,
+ bcm43xx_radio_read16(bcm, 0x0043) & 0x00F0);
+ bcm43xx_phy_write(bcm, 0x005A, 0x0480);
+ bcm43xx_phy_write(bcm, 0x0059, 0x0810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ udelay(20);
+
+ nrssi1 = (s16)bcm43xx_phy_read(bcm, 0x0027);
+ bcm43xx_phy_write(bcm, 0x0030, backup[3]);
+ bcm43xx_radio_write16(bcm, 0x007A, backup[0]);
+ bcm43xx_write16(bcm, 0x03E2, backup[11]);
+ bcm43xx_phy_write(bcm, 0x0026, backup[4]);
+ bcm43xx_phy_write(bcm, 0x0015, backup[5]);
+ bcm43xx_phy_write(bcm, 0x002A, backup[6]);
+ bcm43xx_synth_pu_workaround(bcm, radio->channel);
+ if (phy->rev != 0)
+ bcm43xx_write16(bcm, 0x03F4, backup[13]);
+
+ bcm43xx_phy_write(bcm, 0x0020, backup[7]);
+ bcm43xx_phy_write(bcm, 0x005A, backup[8]);
+ bcm43xx_phy_write(bcm, 0x0059, backup[9]);
+ bcm43xx_phy_write(bcm, 0x0058, backup[10]);
+ bcm43xx_radio_write16(bcm, 0x0052, backup[1]);
+ bcm43xx_radio_write16(bcm, 0x0043, backup[2]);
+
+ if (nrssi0 == nrssi1)
+ radio->nrssislope = 0x00010000;
+ else
+ radio->nrssislope = 0x00400000 / (nrssi0 - nrssi1);
+
+ if (nrssi0 <= -4) {
+ radio->nrssi[0] = nrssi0;
+ radio->nrssi[1] = nrssi1;
+ }
+ break;
+ case BCM43xx_PHYTYPE_G:
+ if (radio->revision >= 9)
+ return;
+ if (radio->revision == 8)
+ bcm43xx_calc_nrssi_offset(bcm);
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) & 0x7FFF);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) & 0xFFFC);
+ backup[7] = bcm43xx_read16(bcm, 0x03E2);
+ bcm43xx_write16(bcm, 0x03E2,
+ bcm43xx_read16(bcm, 0x03E2) | 0x8000);
+ backup[0] = bcm43xx_radio_read16(bcm, 0x007A);
+ backup[1] = bcm43xx_radio_read16(bcm, 0x0052);
+ backup[2] = bcm43xx_radio_read16(bcm, 0x0043);
+ backup[3] = bcm43xx_phy_read(bcm, 0x0015);
+ backup[4] = bcm43xx_phy_read(bcm, 0x005A);
+ backup[5] = bcm43xx_phy_read(bcm, 0x0059);
+ backup[6] = bcm43xx_phy_read(bcm, 0x0058);
+ backup[8] = bcm43xx_read16(bcm, 0x03E6);
+ backup[9] = bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT);
+ if (phy->rev >= 3) {
+ backup[10] = bcm43xx_phy_read(bcm, 0x002E);
+ backup[11] = bcm43xx_phy_read(bcm, 0x002F);
+ backup[12] = bcm43xx_phy_read(bcm, 0x080F);
+ backup[13] = bcm43xx_phy_read(bcm, BCM43xx_PHY_G_LO_CONTROL);
+ backup[14] = bcm43xx_phy_read(bcm, 0x0801);
+ backup[15] = bcm43xx_phy_read(bcm, 0x0060);
+ backup[16] = bcm43xx_phy_read(bcm, 0x0014);
+ backup[17] = bcm43xx_phy_read(bcm, 0x0478);
+ bcm43xx_phy_write(bcm, 0x002E, 0);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_LO_CONTROL, 0);
+ switch (phy->rev) {
+ case 4: case 6: case 7:
+ bcm43xx_phy_write(bcm, 0x0478,
+ bcm43xx_phy_read(bcm, 0x0478)
+ | 0x0100);
+ bcm43xx_phy_write(bcm, 0x0801,
+ bcm43xx_phy_read(bcm, 0x0801)
+ | 0x0040);
+ break;
+ case 3: case 5:
+ bcm43xx_phy_write(bcm, 0x0801,
+ bcm43xx_phy_read(bcm, 0x0801)
+ & 0xFFBF);
+ break;
+ }
+ bcm43xx_phy_write(bcm, 0x0060,
+ bcm43xx_phy_read(bcm, 0x0060)
+ | 0x0040);
+ bcm43xx_phy_write(bcm, 0x0014,
+ bcm43xx_phy_read(bcm, 0x0014)
+ | 0x0200);
+ }
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0070);
+ bcm43xx_set_all_gains(bcm, 0, 8, 0);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) & 0x00F7);
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0811,
+ (bcm43xx_phy_read(bcm, 0x0811) & 0xFFCF) | 0x0030);
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812) & 0xFFCF) | 0x0010);
+ }
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x0080);
+ udelay(20);
+
+ nrssi0 = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (nrssi0 >= 0x0020)
+ nrssi0 -= 0x0040;
+
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) & 0x007F);
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0003,
+ (bcm43xx_phy_read(bcm, 0x0003)
+ & 0xFF9F) | 0x0040);
+ }
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT)
+ | 0x2000);
+ bcm43xx_radio_write16(bcm, 0x007A,
+ bcm43xx_radio_read16(bcm, 0x007A) | 0x000F);
+ bcm43xx_phy_write(bcm, 0x0015, 0xF330);
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0812,
+ (bcm43xx_phy_read(bcm, 0x0812) & 0xFFCF) | 0x0020);
+ bcm43xx_phy_write(bcm, 0x0811,
+ (bcm43xx_phy_read(bcm, 0x0811) & 0xFFCF) | 0x0020);
+ }
+
+ bcm43xx_set_all_gains(bcm, 3, 0, 1);
+ if (radio->revision == 8) {
+ bcm43xx_radio_write16(bcm, 0x0043, 0x001F);
+ } else {
+ tmp = bcm43xx_radio_read16(bcm, 0x0052) & 0xFF0F;
+ bcm43xx_radio_write16(bcm, 0x0052, tmp | 0x0060);
+ tmp = bcm43xx_radio_read16(bcm, 0x0043) & 0xFFF0;
+ bcm43xx_radio_write16(bcm, 0x0043, tmp | 0x0009);
+ }
+ bcm43xx_phy_write(bcm, 0x005A, 0x0480);
+ bcm43xx_phy_write(bcm, 0x0059, 0x0810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ udelay(20);
+ nrssi1 = (s16)((bcm43xx_phy_read(bcm, 0x047F) >> 8) & 0x003F);
+ if (nrssi1 >= 0x0020)
+ nrssi1 -= 0x0040;
+ if (nrssi0 == nrssi1)
+ radio->nrssislope = 0x00010000;
+ else
+ radio->nrssislope = 0x00400000 / (nrssi0 - nrssi1);
+ if (nrssi0 >= -4) {
+ radio->nrssi[0] = nrssi1;
+ radio->nrssi[1] = nrssi0;
+ }
+ if (phy->rev >= 3) {
+ bcm43xx_phy_write(bcm, 0x002E, backup[10]);
+ bcm43xx_phy_write(bcm, 0x002F, backup[11]);
+ bcm43xx_phy_write(bcm, 0x080F, backup[12]);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_LO_CONTROL, backup[13]);
+ }
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x0812,
+ bcm43xx_phy_read(bcm, 0x0812) & 0xFFCF);
+ bcm43xx_phy_write(bcm, 0x0811,
+ bcm43xx_phy_read(bcm, 0x0811) & 0xFFCF);
+ }
+
+ bcm43xx_radio_write16(bcm, 0x007A, backup[0]);
+ bcm43xx_radio_write16(bcm, 0x0052, backup[1]);
+ bcm43xx_radio_write16(bcm, 0x0043, backup[2]);
+ bcm43xx_write16(bcm, 0x03E2, backup[7]);
+ bcm43xx_write16(bcm, 0x03E6, backup[8]);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, backup[9]);
+ bcm43xx_phy_write(bcm, 0x0015, backup[3]);
+ bcm43xx_phy_write(bcm, 0x005A, backup[4]);
+ bcm43xx_phy_write(bcm, 0x0059, backup[5]);
+ bcm43xx_phy_write(bcm, 0x0058, backup[6]);
+ bcm43xx_synth_pu_workaround(bcm, radio->channel);
+ bcm43xx_phy_write(bcm, 0x0802,
+ bcm43xx_phy_read(bcm, 0x0802) | (0x0001 | 0x0002));
+ bcm43xx_set_original_gains(bcm);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) | 0x8000);
+ if (phy->rev >= 3) {
+ bcm43xx_phy_write(bcm, 0x0801, backup[14]);
+ bcm43xx_phy_write(bcm, 0x0060, backup[15]);
+ bcm43xx_phy_write(bcm, 0x0014, backup[16]);
+ bcm43xx_phy_write(bcm, 0x0478, backup[17]);
+ }
+ bcm43xx_nrssi_mem_update(bcm);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+void bcm43xx_calc_nrssi_threshold(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ s32 threshold;
+ s32 a, b;
+ s16 tmp16;
+ u16 tmp_u16;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_B: {
+ if (radio->version != 0x2050)
+ return;
+ if (!(bcm->sprom.boardflags & BCM43xx_BFL_RSSI))
+ return;
+
+ if (radio->revision >= 6) {
+ threshold = (radio->nrssi[1] - radio->nrssi[0]) * 32;
+ threshold += 20 * (radio->nrssi[0] + 1);
+ threshold /= 40;
+ } else
+ threshold = radio->nrssi[1] - 5;
+
+ threshold = limit_value(threshold, 0, 0x3E);
+ bcm43xx_phy_read(bcm, 0x0020); /* dummy read */
+ bcm43xx_phy_write(bcm, 0x0020, (((u16)threshold) << 8) | 0x001C);
+
+ if (radio->revision >= 6) {
+ bcm43xx_phy_write(bcm, 0x0087, 0x0E0D);
+ bcm43xx_phy_write(bcm, 0x0086, 0x0C0B);
+ bcm43xx_phy_write(bcm, 0x0085, 0x0A09);
+ bcm43xx_phy_write(bcm, 0x0084, 0x0808);
+ bcm43xx_phy_write(bcm, 0x0083, 0x0808);
+ bcm43xx_phy_write(bcm, 0x0082, 0x0604);
+ bcm43xx_phy_write(bcm, 0x0081, 0x0302);
+ bcm43xx_phy_write(bcm, 0x0080, 0x0100);
+ }
+ break;
+ }
+ case BCM43xx_PHYTYPE_G:
+ if (!phy->connected ||
+ !(bcm->sprom.boardflags & BCM43xx_BFL_RSSI)) {
+ tmp16 = bcm43xx_nrssi_hw_read(bcm, 0x20);
+ if (tmp16 >= 0x20)
+ tmp16 -= 0x40;
+ if (tmp16 < 3) {
+ bcm43xx_phy_write(bcm, 0x048A,
+ (bcm43xx_phy_read(bcm, 0x048A)
+ & 0xF000) | 0x09EB);
+ } else {
+ bcm43xx_phy_write(bcm, 0x048A,
+ (bcm43xx_phy_read(bcm, 0x048A)
+ & 0xF000) | 0x0AED);
+ }
+ } else {
+ if (radio->interfmode == BCM43xx_RADIO_INTERFMODE_NONWLAN) {
+ a = 0xE;
+ b = 0xA;
+ } else if (!radio->aci_wlan_automatic && radio->aci_enable) {
+ a = 0x13;
+ b = 0x12;
+ } else {
+ a = 0xE;
+ b = 0x11;
+ }
+
+ a = a * (radio->nrssi[1] - radio->nrssi[0]);
+ a += (radio->nrssi[0] << 6);
+ if (a < 32)
+ a += 31;
+ else
+ a += 32;
+ a = a >> 6;
+ a = limit_value(a, -31, 31);
+
+ b = b * (radio->nrssi[1] - radio->nrssi[0]);
+ b += (radio->nrssi[0] << 6);
+ if (b < 32)
+ b += 31;
+ else
+ b += 32;
+ b = b >> 6;
+ b = limit_value(b, -31, 31);
+
+ tmp_u16 = bcm43xx_phy_read(bcm, 0x048A) & 0xF000;
+ tmp_u16 |= ((u32)b & 0x0000003F);
+ tmp_u16 |= (((u32)a & 0x0000003F) << 6);
+ bcm43xx_phy_write(bcm, 0x048A, tmp_u16);
+ }
+ break;
+ default:
+ assert(0);
+ }
+}
+
+/* Stack implementation to save/restore values from the
+ * interference mitigation code.
+ * It is save to restore values in random order.
+ */
+static void _stack_save(u32 *_stackptr, size_t *stackidx,
+ u8 id, u16 offset, u16 value)
+{
+ u32 *stackptr = &(_stackptr[*stackidx]);
+
+ assert((offset & 0xF000) == 0x0000);
+ assert((id & 0xF0) == 0x00);
+ *stackptr = offset;
+ *stackptr |= ((u32)id) << 12;
+ *stackptr |= ((u32)value) << 16;
+ (*stackidx)++;
+ assert(*stackidx < BCM43xx_INTERFSTACK_SIZE);
+}
+
+static u16 _stack_restore(u32 *stackptr,
+ u8 id, u16 offset)
+{
+ size_t i;
+
+ assert((offset & 0xF000) == 0x0000);
+ assert((id & 0xF0) == 0x00);
+ for (i = 0; i < BCM43xx_INTERFSTACK_SIZE; i++, stackptr++) {
+ if ((*stackptr & 0x00000FFF) != offset)
+ continue;
+ if (((*stackptr & 0x0000F000) >> 12) != id)
+ continue;
+ return ((*stackptr & 0xFFFF0000) >> 16);
+ }
+ assert(0);
+
+ return 0;
+}
+
+#define phy_stacksave(offset) \
+ do { \
+ _stack_save(stack, &stackidx, 0x1, (offset), \
+ bcm43xx_phy_read(bcm, (offset))); \
+ } while (0)
+#define phy_stackrestore(offset) \
+ do { \
+ bcm43xx_phy_write(bcm, (offset), \
+ _stack_restore(stack, 0x1, \
+ (offset))); \
+ } while (0)
+#define radio_stacksave(offset) \
+ do { \
+ _stack_save(stack, &stackidx, 0x2, (offset), \
+ bcm43xx_radio_read16(bcm, (offset))); \
+ } while (0)
+#define radio_stackrestore(offset) \
+ do { \
+ bcm43xx_radio_write16(bcm, (offset), \
+ _stack_restore(stack, 0x2, \
+ (offset))); \
+ } while (0)
+#define ilt_stacksave(offset) \
+ do { \
+ _stack_save(stack, &stackidx, 0x3, (offset), \
+ bcm43xx_ilt_read(bcm, (offset))); \
+ } while (0)
+#define ilt_stackrestore(offset) \
+ do { \
+ bcm43xx_ilt_write(bcm, (offset), \
+ _stack_restore(stack, 0x3, \
+ (offset))); \
+ } while (0)
+
+static void
+bcm43xx_radio_interference_mitigation_enable(struct bcm43xx_private *bcm,
+ int mode)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 tmp, flipped;
+ u32 tmp32;
+ size_t stackidx = 0;
+ u32 *stack = radio->interfstack;
+
+ switch (mode) {
+ case BCM43xx_RADIO_INTERFMODE_NONWLAN:
+ if (phy->rev != 1) {
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B) | 0x0800);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) & ~0x4000);
+ break;
+ }
+ radio_stacksave(0x0078);
+ tmp = (bcm43xx_radio_read16(bcm, 0x0078) & 0x001E);
+ flipped = flip_4bit(tmp);
+ if (flipped < 10 && flipped >= 8)
+ flipped = 7;
+ else if (flipped >= 10)
+ flipped -= 3;
+ flipped = flip_4bit(flipped);
+ flipped = (flipped << 1) | 0x0020;
+ bcm43xx_radio_write16(bcm, 0x0078, flipped);
+
+ bcm43xx_calc_nrssi_threshold(bcm);
+
+ phy_stacksave(0x0406);
+ bcm43xx_phy_write(bcm, 0x0406, 0x7E28);
+
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B) | 0x0800);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_RADIO_BITFIELD,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_RADIO_BITFIELD) | 0x1000);
+
+ phy_stacksave(0x04A0);
+ bcm43xx_phy_write(bcm, 0x04A0,
+ (bcm43xx_phy_read(bcm, 0x04A0) & 0xC0C0) | 0x0008);
+ phy_stacksave(0x04A1);
+ bcm43xx_phy_write(bcm, 0x04A1,
+ (bcm43xx_phy_read(bcm, 0x04A1) & 0xC0C0) | 0x0605);
+ phy_stacksave(0x04A2);
+ bcm43xx_phy_write(bcm, 0x04A2,
+ (bcm43xx_phy_read(bcm, 0x04A2) & 0xC0C0) | 0x0204);
+ phy_stacksave(0x04A8);
+ bcm43xx_phy_write(bcm, 0x04A8,
+ (bcm43xx_phy_read(bcm, 0x04A8) & 0xC0C0) | 0x0803);
+ phy_stacksave(0x04AB);
+ bcm43xx_phy_write(bcm, 0x04AB,
+ (bcm43xx_phy_read(bcm, 0x04AB) & 0xC0C0) | 0x0605);
+
+ phy_stacksave(0x04A7);
+ bcm43xx_phy_write(bcm, 0x04A7, 0x0002);
+ phy_stacksave(0x04A3);
+ bcm43xx_phy_write(bcm, 0x04A3, 0x287A);
+ phy_stacksave(0x04A9);
+ bcm43xx_phy_write(bcm, 0x04A9, 0x2027);
+ phy_stacksave(0x0493);
+ bcm43xx_phy_write(bcm, 0x0493, 0x32F5);
+ phy_stacksave(0x04AA);
+ bcm43xx_phy_write(bcm, 0x04AA, 0x2027);
+ phy_stacksave(0x04AC);
+ bcm43xx_phy_write(bcm, 0x04AC, 0x32F5);
+ break;
+ case BCM43xx_RADIO_INTERFMODE_MANUALWLAN:
+ if (bcm43xx_phy_read(bcm, 0x0033) & 0x0800)
+ break;
+
+ radio->aci_enable = 1;
+
+ phy_stacksave(BCM43xx_PHY_RADIO_BITFIELD);
+ phy_stacksave(BCM43xx_PHY_G_CRS);
+ if (phy->rev < 2) {
+ phy_stacksave(0x0406);
+ } else {
+ phy_stacksave(0x04C0);
+ phy_stacksave(0x04C1);
+ }
+ phy_stacksave(0x0033);
+ phy_stacksave(0x04A7);
+ phy_stacksave(0x04A3);
+ phy_stacksave(0x04A9);
+ phy_stacksave(0x04AA);
+ phy_stacksave(0x04AC);
+ phy_stacksave(0x0493);
+ phy_stacksave(0x04A1);
+ phy_stacksave(0x04A0);
+ phy_stacksave(0x04A2);
+ phy_stacksave(0x048A);
+ phy_stacksave(0x04A8);
+ phy_stacksave(0x04AB);
+ if (phy->rev == 2) {
+ phy_stacksave(0x04AD);
+ phy_stacksave(0x04AE);
+ } else if (phy->rev >= 3) {
+ phy_stacksave(0x04AD);
+ phy_stacksave(0x0415);
+ phy_stacksave(0x0416);
+ phy_stacksave(0x0417);
+ ilt_stacksave(0x1A00 + 0x2);
+ ilt_stacksave(0x1A00 + 0x3);
+ }
+ phy_stacksave(0x042B);
+ phy_stacksave(0x048C);
+
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_RADIO_BITFIELD,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_RADIO_BITFIELD)
+ & ~0x1000);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ (bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS)
+ & 0xFFFC) | 0x0002);
+
+ bcm43xx_phy_write(bcm, 0x0033, 0x0800);
+ bcm43xx_phy_write(bcm, 0x04A3, 0x2027);
+ bcm43xx_phy_write(bcm, 0x04A9, 0x1CA8);
+ bcm43xx_phy_write(bcm, 0x0493, 0x287A);
+ bcm43xx_phy_write(bcm, 0x04AA, 0x1CA8);
+ bcm43xx_phy_write(bcm, 0x04AC, 0x287A);
+
+ bcm43xx_phy_write(bcm, 0x04A0,
+ (bcm43xx_phy_read(bcm, 0x04A0)
+ & 0xFFC0) | 0x001A);
+ bcm43xx_phy_write(bcm, 0x04A7, 0x000D);
+
+ if (phy->rev < 2) {
+ bcm43xx_phy_write(bcm, 0x0406, 0xFF0D);
+ } else if (phy->rev == 2) {
+ bcm43xx_phy_write(bcm, 0x04C0, 0xFFFF);
+ bcm43xx_phy_write(bcm, 0x04C1, 0x00A9);
+ } else {
+ bcm43xx_phy_write(bcm, 0x04C0, 0x00C1);
+ bcm43xx_phy_write(bcm, 0x04C1, 0x0059);
+ }
+
+ bcm43xx_phy_write(bcm, 0x04A1,
+ (bcm43xx_phy_read(bcm, 0x04A1)
+ & 0xC0FF) | 0x1800);
+ bcm43xx_phy_write(bcm, 0x04A1,
+ (bcm43xx_phy_read(bcm, 0x04A1)
+ & 0xFFC0) | 0x0015);
+ bcm43xx_phy_write(bcm, 0x04A8,
+ (bcm43xx_phy_read(bcm, 0x04A8)
+ & 0xCFFF) | 0x1000);
+ bcm43xx_phy_write(bcm, 0x04A8,
+ (bcm43xx_phy_read(bcm, 0x04A8)
+ & 0xF0FF) | 0x0A00);
+ bcm43xx_phy_write(bcm, 0x04AB,
+ (bcm43xx_phy_read(bcm, 0x04AB)
+ & 0xCFFF) | 0x1000);
+ bcm43xx_phy_write(bcm, 0x04AB,
+ (bcm43xx_phy_read(bcm, 0x04AB)
+ & 0xF0FF) | 0x0800);
+ bcm43xx_phy_write(bcm, 0x04AB,
+ (bcm43xx_phy_read(bcm, 0x04AB)
+ & 0xFFCF) | 0x0010);
+ bcm43xx_phy_write(bcm, 0x04AB,
+ (bcm43xx_phy_read(bcm, 0x04AB)
+ & 0xFFF0) | 0x0005);
+ bcm43xx_phy_write(bcm, 0x04A8,
+ (bcm43xx_phy_read(bcm, 0x04A8)
+ & 0xFFCF) | 0x0010);
+ bcm43xx_phy_write(bcm, 0x04A8,
+ (bcm43xx_phy_read(bcm, 0x04A8)
+ & 0xFFF0) | 0x0006);
+ bcm43xx_phy_write(bcm, 0x04A2,
+ (bcm43xx_phy_read(bcm, 0x04A2)
+ & 0xF0FF) | 0x0800);
+ bcm43xx_phy_write(bcm, 0x04A0,
+ (bcm43xx_phy_read(bcm, 0x04A0)
+ & 0xF0FF) | 0x0500);
+ bcm43xx_phy_write(bcm, 0x04A2,
+ (bcm43xx_phy_read(bcm, 0x04A2)
+ & 0xFFF0) | 0x000B);
+
+ if (phy->rev >= 3) {
+ bcm43xx_phy_write(bcm, 0x048A,
+ bcm43xx_phy_read(bcm, 0x048A)
+ & ~0x8000);
+ bcm43xx_phy_write(bcm, 0x0415,
+ (bcm43xx_phy_read(bcm, 0x0415)
+ & 0x8000) | 0x36D8);
+ bcm43xx_phy_write(bcm, 0x0416,
+ (bcm43xx_phy_read(bcm, 0x0416)
+ & 0x8000) | 0x36D8);
+ bcm43xx_phy_write(bcm, 0x0417,
+ (bcm43xx_phy_read(bcm, 0x0417)
+ & 0xFE00) | 0x016D);
+ } else {
+ bcm43xx_phy_write(bcm, 0x048A,
+ bcm43xx_phy_read(bcm, 0x048A)
+ | 0x1000);
+ bcm43xx_phy_write(bcm, 0x048A,
+ (bcm43xx_phy_read(bcm, 0x048A)
+ & 0x9FFF) | 0x2000);
+ tmp32 = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET);
+ if (!(tmp32 & 0x800)) {
+ tmp32 |= 0x800;
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ tmp32);
+ }
+ }
+ if (phy->rev >= 2) {
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B)
+ | 0x0800);
+ }
+ bcm43xx_phy_write(bcm, 0x048C,
+ (bcm43xx_phy_read(bcm, 0x048C)
+ & 0xF0FF) | 0x0200);
+ if (phy->rev == 2) {
+ bcm43xx_phy_write(bcm, 0x04AE,
+ (bcm43xx_phy_read(bcm, 0x04AE)
+ & 0xFF00) | 0x007F);
+ bcm43xx_phy_write(bcm, 0x04AD,
+ (bcm43xx_phy_read(bcm, 0x04AD)
+ & 0x00FF) | 0x1300);
+ } else if (phy->rev >= 6) {
+ bcm43xx_ilt_write(bcm, 0x1A00 + 0x3, 0x007F);
+ bcm43xx_ilt_write(bcm, 0x1A00 + 0x2, 0x007F);
+ bcm43xx_phy_write(bcm, 0x04AD,
+ bcm43xx_phy_read(bcm, 0x04AD)
+ & 0x00FF);
+ }
+ bcm43xx_calc_nrssi_slope(bcm);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+static void
+bcm43xx_radio_interference_mitigation_disable(struct bcm43xx_private *bcm,
+ int mode)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u32 tmp32;
+ u32 *stack = radio->interfstack;
+
+ switch (mode) {
+ case BCM43xx_RADIO_INTERFMODE_NONWLAN:
+ if (phy->rev != 1) {
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B) & ~0x0800);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) | 0x4000);
+ break;
+ }
+ phy_stackrestore(0x0078);
+ bcm43xx_calc_nrssi_threshold(bcm);
+ phy_stackrestore(0x0406);
+ bcm43xx_phy_write(bcm, 0x042B,
+ bcm43xx_phy_read(bcm, 0x042B) & ~0x0800);
+ if (!bcm->bad_frames_preempt) {
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_RADIO_BITFIELD,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_RADIO_BITFIELD)
+ & ~(1 << 11));
+ }
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) | 0x4000);
+ phy_stackrestore(0x04A0);
+ phy_stackrestore(0x04A1);
+ phy_stackrestore(0x04A2);
+ phy_stackrestore(0x04A8);
+ phy_stackrestore(0x04AB);
+ phy_stackrestore(0x04A7);
+ phy_stackrestore(0x04A3);
+ phy_stackrestore(0x04A9);
+ phy_stackrestore(0x0493);
+ phy_stackrestore(0x04AA);
+ phy_stackrestore(0x04AC);
+ break;
+ case BCM43xx_RADIO_INTERFMODE_MANUALWLAN:
+ if (!(bcm43xx_phy_read(bcm, 0x0033) & 0x0800))
+ break;
+
+ radio->aci_enable = 0;
+
+ phy_stackrestore(BCM43xx_PHY_RADIO_BITFIELD);
+ phy_stackrestore(BCM43xx_PHY_G_CRS);
+ phy_stackrestore(0x0033);
+ phy_stackrestore(0x04A3);
+ phy_stackrestore(0x04A9);
+ phy_stackrestore(0x0493);
+ phy_stackrestore(0x04AA);
+ phy_stackrestore(0x04AC);
+ phy_stackrestore(0x04A0);
+ phy_stackrestore(0x04A7);
+ if (phy->rev >= 2) {
+ phy_stackrestore(0x04C0);
+ phy_stackrestore(0x04C1);
+ } else
+ phy_stackrestore(0x0406);
+ phy_stackrestore(0x04A1);
+ phy_stackrestore(0x04AB);
+ phy_stackrestore(0x04A8);
+ if (phy->rev == 2) {
+ phy_stackrestore(0x04AD);
+ phy_stackrestore(0x04AE);
+ } else if (phy->rev >= 3) {
+ phy_stackrestore(0x04AD);
+ phy_stackrestore(0x0415);
+ phy_stackrestore(0x0416);
+ phy_stackrestore(0x0417);
+ ilt_stackrestore(0x1A00 + 0x2);
+ ilt_stackrestore(0x1A00 + 0x3);
+ }
+ phy_stackrestore(0x04A2);
+ phy_stackrestore(0x04A8);
+ phy_stackrestore(0x042B);
+ phy_stackrestore(0x048C);
+ tmp32 = bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET);
+ if (tmp32 & 0x800) {
+ tmp32 &= ~0x800;
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ tmp32);
+ }
+ bcm43xx_calc_nrssi_slope(bcm);
+ break;
+ default:
+ assert(0);
+ }
+}
+
+#undef phy_stacksave
+#undef phy_stackrestore
+#undef radio_stacksave
+#undef radio_stackrestore
+#undef ilt_stacksave
+#undef ilt_stackrestore
+
+int bcm43xx_radio_set_interference_mitigation(struct bcm43xx_private *bcm,
+ int mode)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ int currentmode;
+
+ if ((phy->type != BCM43xx_PHYTYPE_G) ||
+ (phy->rev == 0) ||
+ (!phy->connected))
+ return -ENODEV;
+
+ radio->aci_wlan_automatic = 0;
+ switch (mode) {
+ case BCM43xx_RADIO_INTERFMODE_AUTOWLAN:
+ radio->aci_wlan_automatic = 1;
+ if (radio->aci_enable)
+ mode = BCM43xx_RADIO_INTERFMODE_MANUALWLAN;
+ else
+ mode = BCM43xx_RADIO_INTERFMODE_NONE;
+ break;
+ case BCM43xx_RADIO_INTERFMODE_NONE:
+ case BCM43xx_RADIO_INTERFMODE_NONWLAN:
+ case BCM43xx_RADIO_INTERFMODE_MANUALWLAN:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ currentmode = radio->interfmode;
+ if (currentmode == mode)
+ return 0;
+ if (currentmode != BCM43xx_RADIO_INTERFMODE_NONE)
+ bcm43xx_radio_interference_mitigation_disable(bcm, currentmode);
+
+ if (mode == BCM43xx_RADIO_INTERFMODE_NONE) {
+ radio->aci_enable = 0;
+ radio->aci_hw_rssi = 0;
+ } else
+ bcm43xx_radio_interference_mitigation_enable(bcm, mode);
+ radio->interfmode = mode;
+
+ return 0;
+}
+
+u16 bcm43xx_radio_calibrationvalue(struct bcm43xx_private *bcm)
+{
+ u16 reg, index, ret;
+
+ reg = bcm43xx_radio_read16(bcm, 0x0060);
+ index = (reg & 0x001E) >> 1;
+ ret = rcc_table[index] << 1;
+ ret |= (reg & 0x0001);
+ ret |= 0x0020;
+
+ return ret;
+}
+
+u16 bcm43xx_radio_init2050(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 backup[19] = { 0 };
+ u16 ret;
+ u16 i, j;
+ u32 tmp1 = 0, tmp2 = 0;
+
+ backup[0] = bcm43xx_radio_read16(bcm, 0x0043);
+ backup[14] = bcm43xx_radio_read16(bcm, 0x0051);
+ backup[15] = bcm43xx_radio_read16(bcm, 0x0052);
+ backup[1] = bcm43xx_phy_read(bcm, 0x0015);
+ backup[16] = bcm43xx_phy_read(bcm, 0x005A);
+ backup[17] = bcm43xx_phy_read(bcm, 0x0059);
+ backup[18] = bcm43xx_phy_read(bcm, 0x0058);
+ if (phy->type == BCM43xx_PHYTYPE_B) {
+ backup[2] = bcm43xx_phy_read(bcm, 0x0030);
+ backup[3] = bcm43xx_read16(bcm, 0x03EC);
+ bcm43xx_phy_write(bcm, 0x0030, 0x00FF);
+ bcm43xx_write16(bcm, 0x03EC, 0x3F3F);
+ } else {
+ if (phy->connected) {
+ backup[4] = bcm43xx_phy_read(bcm, 0x0811);
+ backup[5] = bcm43xx_phy_read(bcm, 0x0812);
+ backup[6] = bcm43xx_phy_read(bcm, 0x0814);
+ backup[7] = bcm43xx_phy_read(bcm, 0x0815);
+ backup[8] = bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS);
+ backup[9] = bcm43xx_phy_read(bcm, 0x0802);
+ bcm43xx_phy_write(bcm, 0x0814,
+ (bcm43xx_phy_read(bcm, 0x0814) | 0x0003));
+ bcm43xx_phy_write(bcm, 0x0815,
+ (bcm43xx_phy_read(bcm, 0x0815) & 0xFFFC));
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS,
+ (bcm43xx_phy_read(bcm, BCM43xx_PHY_G_CRS) & 0x7FFF));
+ bcm43xx_phy_write(bcm, 0x0802,
+ (bcm43xx_phy_read(bcm, 0x0802) & 0xFFFC));
+ bcm43xx_phy_write(bcm, 0x0811, 0x01B3);
+ bcm43xx_phy_write(bcm, 0x0812, 0x0FB2);
+ }
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_RADIO,
+ (bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_RADIO) | 0x8000));
+ }
+ backup[10] = bcm43xx_phy_read(bcm, 0x0035);
+ bcm43xx_phy_write(bcm, 0x0035,
+ (bcm43xx_phy_read(bcm, 0x0035) & 0xFF7F));
+ backup[11] = bcm43xx_read16(bcm, 0x03E6);
+ backup[12] = bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT);
+
+ // Initialization
+ if (phy->version == 0) {
+ bcm43xx_write16(bcm, 0x03E6, 0x0122);
+ } else {
+ if (phy->version >= 2)
+ bcm43xx_write16(bcm, 0x03E6, 0x0040);
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
+ (bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT) | 0x2000));
+ }
+
+ ret = bcm43xx_radio_calibrationvalue(bcm);
+
+ if (phy->type == BCM43xx_PHYTYPE_B)
+ bcm43xx_radio_write16(bcm, 0x0078, 0x0003);
+
+ bcm43xx_phy_write(bcm, 0x0015, 0xBFAF);
+ bcm43xx_phy_write(bcm, 0x002B, 0x1403);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x00B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xBFA0);
+ bcm43xx_radio_write16(bcm, 0x0051,
+ (bcm43xx_radio_read16(bcm, 0x0051) | 0x0004));
+ bcm43xx_radio_write16(bcm, 0x0052, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x0043,
+ bcm43xx_radio_read16(bcm, 0x0043) | 0x0009);
+ bcm43xx_phy_write(bcm, 0x0058, 0x0000);
+
+ for (i = 0; i < 16; i++) {
+ bcm43xx_phy_write(bcm, 0x005A, 0x0480);
+ bcm43xx_phy_write(bcm, 0x0059, 0xC810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xAFB0);
+ udelay(10);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xEFB0);
+ udelay(10);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xFFF0);
+ udelay(10);
+ tmp1 += bcm43xx_phy_read(bcm, 0x002D);
+ bcm43xx_phy_write(bcm, 0x0058, 0x0000);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xAFB0);
+ }
+
+ tmp1++;
+ tmp1 >>= 9;
+ udelay(10);
+ bcm43xx_phy_write(bcm, 0x0058, 0x0000);
+
+ for (i = 0; i < 16; i++) {
+ bcm43xx_radio_write16(bcm, 0x0078, (flip_4bit(i) << 1) | 0x0020);
+ backup[13] = bcm43xx_radio_read16(bcm, 0x0078);
+ udelay(10);
+ for (j = 0; j < 16; j++) {
+ bcm43xx_phy_write(bcm, 0x005A, 0x0D80);
+ bcm43xx_phy_write(bcm, 0x0059, 0xC810);
+ bcm43xx_phy_write(bcm, 0x0058, 0x000D);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xAFB0);
+ udelay(10);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xEFB0);
+ udelay(10);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B3); /* 0x30B3 is not a typo */
+ bcm43xx_phy_write(bcm, 0x0015, 0xFFF0);
+ udelay(10);
+ tmp2 += bcm43xx_phy_read(bcm, 0x002D);
+ bcm43xx_phy_write(bcm, 0x0058, 0x0000);
+ if (phy->connected)
+ bcm43xx_phy_write(bcm, 0x0812, 0x30B2);
+ bcm43xx_phy_write(bcm, 0x0015, 0xAFB0);
+ }
+ tmp2++;
+ tmp2 >>= 8;
+ if (tmp1 < tmp2)
+ break;
+ }
+
+ /* Restore the registers */
+ bcm43xx_phy_write(bcm, 0x0015, backup[1]);
+ bcm43xx_radio_write16(bcm, 0x0051, backup[14]);
+ bcm43xx_radio_write16(bcm, 0x0052, backup[15]);
+ bcm43xx_radio_write16(bcm, 0x0043, backup[0]);
+ bcm43xx_phy_write(bcm, 0x005A, backup[16]);
+ bcm43xx_phy_write(bcm, 0x0059, backup[17]);
+ bcm43xx_phy_write(bcm, 0x0058, backup[18]);
+ bcm43xx_write16(bcm, 0x03E6, backup[11]);
+ if (phy->version != 0)
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT, backup[12]);
+ bcm43xx_phy_write(bcm, 0x0035, backup[10]);
+ bcm43xx_radio_selectchannel(bcm, radio->channel, 1);
+ if (phy->type == BCM43xx_PHYTYPE_B) {
+ bcm43xx_phy_write(bcm, 0x0030, backup[2]);
+ bcm43xx_write16(bcm, 0x03EC, backup[3]);
+ } else {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_PHY_RADIO,
+ (bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_RADIO) & 0x7FFF));
+ if (phy->connected) {
+ bcm43xx_phy_write(bcm, 0x0811, backup[4]);
+ bcm43xx_phy_write(bcm, 0x0812, backup[5]);
+ bcm43xx_phy_write(bcm, 0x0814, backup[6]);
+ bcm43xx_phy_write(bcm, 0x0815, backup[7]);
+ bcm43xx_phy_write(bcm, BCM43xx_PHY_G_CRS, backup[8]);
+ bcm43xx_phy_write(bcm, 0x0802, backup[9]);
+ }
+ }
+ if (i >= 15)
+ ret = backup[13];
+
+ return ret;
+}
+
+void bcm43xx_radio_init2060(struct bcm43xx_private *bcm)
+{
+ int err;
+
+ bcm43xx_radio_write16(bcm, 0x0004, 0x00C0);
+ bcm43xx_radio_write16(bcm, 0x0005, 0x0008);
+ bcm43xx_radio_write16(bcm, 0x0009, 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0005, 0x00AA);
+ bcm43xx_radio_write16(bcm, 0x0032, 0x008F);
+ bcm43xx_radio_write16(bcm, 0x0006, 0x008F);
+ bcm43xx_radio_write16(bcm, 0x0034, 0x008F);
+ bcm43xx_radio_write16(bcm, 0x002C, 0x0007);
+ bcm43xx_radio_write16(bcm, 0x0082, 0x0080);
+ bcm43xx_radio_write16(bcm, 0x0080, 0x0000);
+ bcm43xx_radio_write16(bcm, 0x003F, 0x00DA);
+ bcm43xx_radio_write16(bcm, 0x0005, bcm43xx_radio_read16(bcm, 0x0005) & ~0x0008);
+ bcm43xx_radio_write16(bcm, 0x0081, bcm43xx_radio_read16(bcm, 0x0081) & ~0x0010);
+ bcm43xx_radio_write16(bcm, 0x0081, bcm43xx_radio_read16(bcm, 0x0081) & ~0x0020);
+ bcm43xx_radio_write16(bcm, 0x0081, bcm43xx_radio_read16(bcm, 0x0081) & ~0x0020);
+ udelay(400);
+
+ bcm43xx_radio_write16(bcm, 0x0081, (bcm43xx_radio_read16(bcm, 0x0081) & ~0x0020) | 0x0010);
+ udelay(400);
+
+ bcm43xx_radio_write16(bcm, 0x0005, (bcm43xx_radio_read16(bcm, 0x0005) & ~0x0008) | 0x0008);
+ bcm43xx_radio_write16(bcm, 0x0085, bcm43xx_radio_read16(bcm, 0x0085) & ~0x0010);
+ bcm43xx_radio_write16(bcm, 0x0005, bcm43xx_radio_read16(bcm, 0x0005) & ~0x0008);
+ bcm43xx_radio_write16(bcm, 0x0081, bcm43xx_radio_read16(bcm, 0x0081) & ~0x0040);
+ bcm43xx_radio_write16(bcm, 0x0081, (bcm43xx_radio_read16(bcm, 0x0081) & ~0x0040) | 0x0040);
+ bcm43xx_radio_write16(bcm, 0x0005, (bcm43xx_radio_read16(bcm, 0x0081) & ~0x0008) | 0x0008);
+ bcm43xx_phy_write(bcm, 0x0063, 0xDDC6);
+ bcm43xx_phy_write(bcm, 0x0069, 0x07BE);
+ bcm43xx_phy_write(bcm, 0x006A, 0x0000);
+
+ err = bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_A, 0);
+ assert(err == 0);
+ udelay(1000);
+}
+
+static inline
+u16 freq_r3A_value(u16 frequency)
+{
+ u16 value;
+
+ if (frequency < 5091)
+ value = 0x0040;
+ else if (frequency < 5321)
+ value = 0x0000;
+ else if (frequency < 5806)
+ value = 0x0080;
+ else
+ value = 0x0040;
+
+ return value;
+}
+
+void bcm43xx_radio_set_tx_iq(struct bcm43xx_private *bcm)
+{
+ static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
+ static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A };
+ u16 tmp = bcm43xx_radio_read16(bcm, 0x001E);
+ int i, j;
+
+ for (i = 0; i < 5; i++) {
+ for (j = 0; j < 5; j++) {
+ if (tmp == (data_high[i] << 4 | data_low[j])) {
+ bcm43xx_phy_write(bcm, 0x0069, (i - j) << 8 | 0x00C0);
+ return;
+ }
+ }
+ }
+}
+
+int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm,
+ u8 channel,
+ int synthetic_pu_workaround)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 r8, tmp;
+ u16 freq;
+
+ if ((radio->manufact == 0x17F) &&
+ (radio->version == 0x2060) &&
+ (radio->revision == 1)) {
+ if (channel > 200)
+ return -EINVAL;
+ freq = channel2freq_a(channel);
+
+ r8 = bcm43xx_radio_read16(bcm, 0x0008);
+ bcm43xx_write16(bcm, 0x03F0, freq);
+ bcm43xx_radio_write16(bcm, 0x0008, r8);
+
+ TODO();//TODO: write max channel TX power? to Radio 0x2D
+ tmp = bcm43xx_radio_read16(bcm, 0x002E);
+ tmp &= 0x0080;
+ TODO();//TODO: OR tmp with the Power out estimation for this channel?
+ bcm43xx_radio_write16(bcm, 0x002E, tmp);
+
+ if (freq >= 4920 && freq <= 5500) {
+ /*
+ * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F;
+ * = (freq * 0.025862069
+ */
+ r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */
+ }
+ bcm43xx_radio_write16(bcm, 0x0007, (r8 << 4) | r8);
+ bcm43xx_radio_write16(bcm, 0x0020, (r8 << 4) | r8);
+ bcm43xx_radio_write16(bcm, 0x0021, (r8 << 4) | r8);
+ bcm43xx_radio_write16(bcm, 0x0022,
+ (bcm43xx_radio_read16(bcm, 0x0022)
+ & 0x000F) | (r8 << 4));
+ bcm43xx_radio_write16(bcm, 0x002A, (r8 << 4));
+ bcm43xx_radio_write16(bcm, 0x002B, (r8 << 4));
+ bcm43xx_radio_write16(bcm, 0x0008,
+ (bcm43xx_radio_read16(bcm, 0x0008)
+ & 0x00F0) | (r8 << 4));
+ bcm43xx_radio_write16(bcm, 0x0029,
+ (bcm43xx_radio_read16(bcm, 0x0029)
+ & 0xFF0F) | 0x00B0);
+ bcm43xx_radio_write16(bcm, 0x0035, 0x00AA);
+ bcm43xx_radio_write16(bcm, 0x0036, 0x0085);
+ bcm43xx_radio_write16(bcm, 0x003A,
+ (bcm43xx_radio_read16(bcm, 0x003A)
+ & 0xFF20) | freq_r3A_value(freq));
+ bcm43xx_radio_write16(bcm, 0x003D,
+ bcm43xx_radio_read16(bcm, 0x003D) & 0x00FF);
+ bcm43xx_radio_write16(bcm, 0x0081,
+ (bcm43xx_radio_read16(bcm, 0x0081)
+ & 0xFF7F) | 0x0080);
+ bcm43xx_radio_write16(bcm, 0x0035,
+ bcm43xx_radio_read16(bcm, 0x0035) & 0xFFEF);
+ bcm43xx_radio_write16(bcm, 0x0035,
+ (bcm43xx_radio_read16(bcm, 0x0035)
+ & 0xFFEF) | 0x0010);
+ bcm43xx_radio_set_tx_iq(bcm);
+ TODO(); //TODO: TSSI2dbm workaround
+ bcm43xx_phy_xmitpower(bcm);//FIXME correct?
+ } else {
+ if ((channel < 1) || (channel > 14))
+ return -EINVAL;
+
+ if (synthetic_pu_workaround)
+ bcm43xx_synth_pu_workaround(bcm, channel);
+
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL,
+ channel2freq_bg(channel));
+
+ if (channel == 14) {
+ if (bcm->sprom.locale == BCM43xx_LOCALE_JAPAN) {
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET)
+ & ~(1 << 7));
+ } else {
+ bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET,
+ bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED,
+ BCM43xx_UCODEFLAGS_OFFSET)
+ | (1 << 7));
+ }
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT)
+ | (1 << 11));
+ } else {
+ bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
+ bcm43xx_read16(bcm, BCM43xx_MMIO_CHANNEL_EXT)
+ & 0xF7BF);
+ }
+ }
+
+ radio->channel = channel;
+ //XXX: Using the longer of 2 timeouts (8000 vs 2000 usecs). Specs states
+ // that 2000 usecs might suffice.
+ udelay(8000);
+
+ return 0;
+}
+
+void bcm43xx_radio_set_txantenna(struct bcm43xx_private *bcm, u32 val)
+{
+ u16 tmp;
+
+ val <<= 8;
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x0022) & 0xFCFF;
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0022, tmp | val);
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x03A8) & 0xFCFF;
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x03A8, tmp | val);
+ tmp = bcm43xx_shm_read16(bcm, BCM43xx_SHM_SHARED, 0x0054) & 0xFCFF;
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0054, tmp | val);
+}
+
+/* http://bcm-specs.sipsolutions.net/TX_Gain_Base_Band */
+static u16 bcm43xx_get_txgain_base_band(u16 txpower)
+{
+ u16 ret;
+
+ assert(txpower <= 63);
+
+ if (txpower >= 54)
+ ret = 2;
+ else if (txpower >= 49)
+ ret = 4;
+ else if (txpower >= 44)
+ ret = 5;
+ else
+ ret = 6;
+
+ return ret;
+}
+
+/* http://bcm-specs.sipsolutions.net/TX_Gain_Radio_Frequency_Power_Amplifier */
+static u16 bcm43xx_get_txgain_freq_power_amp(u16 txpower)
+{
+ u16 ret;
+
+ assert(txpower <= 63);
+
+ if (txpower >= 32)
+ ret = 0;
+ else if (txpower >= 25)
+ ret = 1;
+ else if (txpower >= 20)
+ ret = 2;
+ else if (txpower >= 12)
+ ret = 3;
+ else
+ ret = 4;
+
+ return ret;
+}
+
+/* http://bcm-specs.sipsolutions.net/TX_Gain_Digital_Analog_Converter */
+static u16 bcm43xx_get_txgain_dac(u16 txpower)
+{
+ u16 ret;
+
+ assert(txpower <= 63);
+
+ if (txpower >= 54)
+ ret = txpower - 53;
+ else if (txpower >= 49)
+ ret = txpower - 42;
+ else if (txpower >= 44)
+ ret = txpower - 37;
+ else if (txpower >= 32)
+ ret = txpower - 32;
+ else if (txpower >= 25)
+ ret = txpower - 20;
+ else if (txpower >= 20)
+ ret = txpower - 13;
+ else if (txpower >= 12)
+ ret = txpower - 8;
+ else
+ ret = txpower;
+
+ return ret;
+}
+
+void bcm43xx_radio_set_txpower_a(struct bcm43xx_private *bcm, u16 txpower)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 pamp, base, dac, ilt;
+
+ txpower = limit_value(txpower, 0, 63);
+
+ pamp = bcm43xx_get_txgain_freq_power_amp(txpower);
+ pamp <<= 5;
+ pamp &= 0x00E0;
+ bcm43xx_phy_write(bcm, 0x0019, pamp);
+
+ base = bcm43xx_get_txgain_base_band(txpower);
+ base &= 0x000F;
+ bcm43xx_phy_write(bcm, 0x0017, base | 0x0020);
+
+ ilt = bcm43xx_ilt_read(bcm, 0x3001);
+ ilt &= 0x0007;
+
+ dac = bcm43xx_get_txgain_dac(txpower);
+ dac <<= 3;
+ dac |= ilt;
+
+ bcm43xx_ilt_write(bcm, 0x3001, dac);
+
+ radio->txpwr_offset = txpower;
+
+ TODO();
+ //TODO: FuncPlaceholder (Adjust BB loft cancel)
+}
+
+void bcm43xx_radio_set_txpower_bg(struct bcm43xx_private *bcm,
+ u16 baseband_attenuation, u16 radio_attenuation,
+ u16 txpower)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ if (baseband_attenuation == 0xFFFF)
+ baseband_attenuation = radio->baseband_atten;
+ if (radio_attenuation == 0xFFFF)
+ radio_attenuation = radio->radio_atten;
+ if (txpower == 0xFFFF)
+ txpower = radio->txctl1;
+ radio->baseband_atten = baseband_attenuation;
+ radio->radio_atten = radio_attenuation;
+ radio->txctl1 = txpower;
+
+ assert(/*baseband_attenuation >= 0 &&*/ baseband_attenuation <= 11);
+ if (radio->revision < 6)
+ assert(/*radio_attenuation >= 0 &&*/ radio_attenuation <= 9);
+ else
+ assert(/* radio_attenuation >= 0 &&*/ radio_attenuation <= 31);
+ assert(/*txpower >= 0 &&*/ txpower <= 7);
+
+ bcm43xx_phy_set_baseband_attenuation(bcm, baseband_attenuation);
+ bcm43xx_radio_write16(bcm, 0x0043, radio_attenuation);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0064, radio_attenuation);
+ if (radio->version == 0x2050) {
+ bcm43xx_radio_write16(bcm, 0x0052,
+ (bcm43xx_radio_read16(bcm, 0x0052) & ~0x0070)
+ | ((txpower << 4) & 0x0070));
+ }
+ //FIXME: The spec is very weird and unclear here.
+ if (phy->type == BCM43xx_PHYTYPE_G)
+ bcm43xx_phy_lo_adjust(bcm, 0);
+}
+
+u16 bcm43xx_default_baseband_attenuation(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ if (radio->version == 0x2050 && radio->revision < 6)
+ return 0;
+ return 2;
+}
+
+u16 bcm43xx_default_radio_attenuation(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ u16 att = 0xFFFF;
+
+ if (phy->type == BCM43xx_PHYTYPE_A)
+ return 0x60;
+
+ switch (radio->version) {
+ case 0x2053:
+ switch (radio->revision) {
+ case 1:
+ att = 6;
+ break;
+ }
+ break;
+ case 0x2050:
+ switch (radio->revision) {
+ case 0:
+ att = 5;
+ break;
+ case 1:
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x421 &&
+ bcm->board_revision >= 30)
+ att = 3;
+ else if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x416)
+ att = 3;
+ else
+ att = 1;
+ } else {
+ if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x421 &&
+ bcm->board_revision >= 30)
+ att = 7;
+ else
+ att = 6;
+ }
+ break;
+ case 2:
+ if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x421 &&
+ bcm->board_revision >= 30)
+ att = 3;
+ else if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x416)
+ att = 5;
+ else if (bcm->chip_id == 0x4320)
+ att = 4;
+ else
+ att = 3;
+ } else
+ att = 6;
+ break;
+ case 3:
+ att = 5;
+ break;
+ case 4:
+ case 5:
+ att = 1;
+ break;
+ case 6:
+ case 7:
+ att = 5;
+ break;
+ case 8:
+ att = 0x1A;
+ break;
+ case 9:
+ default:
+ att = 5;
+ }
+ }
+ if (bcm->board_vendor == PCI_VENDOR_ID_BROADCOM &&
+ bcm->board_type == 0x421) {
+ if (bcm->board_revision < 0x43)
+ att = 2;
+ else if (bcm->board_revision < 0x51)
+ att = 3;
+ }
+ if (att == 0xFFFF)
+ att = 5;
+
+ return att;
+}
+
+u16 bcm43xx_default_txctl1(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ if (radio->version != 0x2050)
+ return 0;
+ if (radio->revision == 1)
+ return 3;
+ if (radio->revision < 6)
+ return 2;
+ if (radio->revision == 8)
+ return 1;
+ return 0;
+}
+
+void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ int err;
+
+ if (radio->enabled)
+ return;
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ bcm43xx_radio_write16(bcm, 0x0004, 0x00C0);
+ bcm43xx_radio_write16(bcm, 0x0005, 0x0008);
+ bcm43xx_phy_write(bcm, 0x0010, bcm43xx_phy_read(bcm, 0x0010) & 0xFFF7);
+ bcm43xx_phy_write(bcm, 0x0011, bcm43xx_phy_read(bcm, 0x0011) & 0xFFF7);
+ bcm43xx_radio_init2060(bcm);
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ bcm43xx_phy_write(bcm, 0x0015, 0x8000);
+ bcm43xx_phy_write(bcm, 0x0015, 0xCC00);
+ bcm43xx_phy_write(bcm, 0x0015, (phy->connected ? 0x00C0 : 0x0000));
+ err = bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 1);
+ assert(err == 0);
+ break;
+ default:
+ assert(0);
+ }
+ radio->enabled = 1;
+ dprintk(KERN_INFO PFX "Radio turned on\n");
+}
+
+void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ bcm43xx_radio_write16(bcm, 0x0004, 0x00FF);
+ bcm43xx_radio_write16(bcm, 0x0005, 0x00FB);
+ bcm43xx_phy_write(bcm, 0x0010, bcm43xx_phy_read(bcm, 0x0010) | 0x0008);
+ bcm43xx_phy_write(bcm, 0x0011, bcm43xx_phy_read(bcm, 0x0011) | 0x0008);
+ }
+ if (phy->type == BCM43xx_PHYTYPE_G && bcm->current_core->rev >= 5) {
+ bcm43xx_phy_write(bcm, 0x0811, bcm43xx_phy_read(bcm, 0x0811) | 0x008C);
+ bcm43xx_phy_write(bcm, 0x0812, bcm43xx_phy_read(bcm, 0x0812) & 0xFF73);
+ } else
+ bcm43xx_phy_write(bcm, 0x0015, 0xAA00);
+ radio->enabled = 0;
+ dprintk(KERN_INFO PFX "Radio turned off\n");
+}
+
+void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0068, 0x7F7F);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x006a, 0x7F7F);
+ break;
+ case BCM43xx_PHYTYPE_B:
+ case BCM43xx_PHYTYPE_G:
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0058, 0x7F7F);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x005a, 0x7F7F);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0070, 0x7F7F);
+ bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0072, 0x7F7F);
+ break;
+ }
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.h b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
new file mode 100644
index 0000000..9ed1803
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
@@ -0,0 +1,99 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#ifndef BCM43xx_RADIO_H_
+#define BCM43xx_RADIO_H_
+
+#include "bcm43xx.h"
+
+
+#define BCM43xx_RADIO_DEFAULT_CHANNEL_A 36
+#define BCM43xx_RADIO_DEFAULT_CHANNEL_BG 6
+
+/* Force antenna 0. */
+#define BCM43xx_RADIO_TXANTENNA_0 0
+/* Force antenna 1. */
+#define BCM43xx_RADIO_TXANTENNA_1 1
+/* Use the RX antenna, that was selected for the most recently
+ * received good PLCP header.
+ */
+#define BCM43xx_RADIO_TXANTENNA_LASTPLCP 3
+#define BCM43xx_RADIO_TXANTENNA_DEFAULT BCM43xx_RADIO_TXANTENNA_LASTPLCP
+
+#define BCM43xx_RADIO_INTERFMODE_NONE 0
+#define BCM43xx_RADIO_INTERFMODE_NONWLAN 1
+#define BCM43xx_RADIO_INTERFMODE_MANUALWLAN 2
+#define BCM43xx_RADIO_INTERFMODE_AUTOWLAN 3
+
+
+void bcm43xx_radio_lock(struct bcm43xx_private *bcm);
+void bcm43xx_radio_unlock(struct bcm43xx_private *bcm);
+
+u16 bcm43xx_radio_read16(struct bcm43xx_private *bcm, u16 offset);
+void bcm43xx_radio_write16(struct bcm43xx_private *bcm, u16 offset, u16 val);
+
+u16 bcm43xx_radio_init2050(struct bcm43xx_private *bcm);
+void bcm43xx_radio_init2060(struct bcm43xx_private *bcm);
+
+void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm);
+void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm);
+
+int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel,
+ int synthetic_pu_workaround);
+
+void bcm43xx_radio_set_txpower_a(struct bcm43xx_private *bcm, u16 txpower);
+void bcm43xx_radio_set_txpower_bg(struct bcm43xx_private *bcm,
+ u16 baseband_attenuation, u16 attenuation,
+ u16 txpower);
+
+u16 bcm43xx_default_baseband_attenuation(struct bcm43xx_private *bcm);
+u16 bcm43xx_default_radio_attenuation(struct bcm43xx_private *bcm);
+u16 bcm43xx_default_txctl1(struct bcm43xx_private *bcm);
+
+void bcm43xx_radio_set_txantenna(struct bcm43xx_private *bcm, u32 val);
+
+void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm);
+
+u8 bcm43xx_radio_aci_detect(struct bcm43xx_private *bcm, u8 channel);
+u8 bcm43xx_radio_aci_scan(struct bcm43xx_private *bcm);
+
+int bcm43xx_radio_set_interference_mitigation(struct bcm43xx_private *bcm, int mode);
+
+void bcm43xx_calc_nrssi_slope(struct bcm43xx_private *bcm);
+void bcm43xx_calc_nrssi_threshold(struct bcm43xx_private *bcm);
+s16 bcm43xx_nrssi_hw_read(struct bcm43xx_private *bcm, u16 offset);
+void bcm43xx_nrssi_hw_write(struct bcm43xx_private *bcm, u16 offset, s16 val);
+void bcm43xx_nrssi_hw_update(struct bcm43xx_private *bcm, u16 val);
+void bcm43xx_nrssi_mem_update(struct bcm43xx_private *bcm);
+
+void bcm43xx_radio_set_tx_iq(struct bcm43xx_private *bcm);
+u16 bcm43xx_radio_calibrationvalue(struct bcm43xx_private *bcm);
+
+#endif /* BCM43xx_RADIO_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
new file mode 100644
index 0000000..c44d890
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
@@ -0,0 +1,322 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ SYSFS support routines
+
+ Copyright (c) 2006 Michael Buesch <mbuesch@freenet.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx_sysfs.h"
+#include "bcm43xx.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_radio.h"
+
+#include <linux/capability.h>
+
+
+#define GENERIC_FILESIZE 64
+
+
+static int get_integer(const char *buf, size_t count)
+{
+ char tmp[10 + 1] = { 0 };
+ int ret = -EINVAL;
+
+ if (count == 0)
+ goto out;
+ count = min(count, (size_t)10);
+ memcpy(tmp, buf, count);
+ ret = simple_strtol(tmp, NULL, 10);
+out:
+ return ret;
+}
+
+static int get_boolean(const char *buf, size_t count)
+{
+ if (count != 0) {
+ if (buf[0] == '1')
+ return 1;
+ if (buf[0] == '0')
+ return 0;
+ if (count >= 4 && memcmp(buf, "true", 4) == 0)
+ return 1;
+ if (count >= 5 && memcmp(buf, "false", 5) == 0)
+ return 0;
+ if (count >= 3 && memcmp(buf, "yes", 3) == 0)
+ return 1;
+ if (count >= 2 && memcmp(buf, "no", 2) == 0)
+ return 0;
+ if (count >= 2 && memcmp(buf, "on", 2) == 0)
+ return 1;
+ if (count >= 3 && memcmp(buf, "off", 3) == 0)
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static ssize_t bcm43xx_attr_sprom_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+ u16 *sprom;
+ unsigned long flags;
+ int i, err;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ assert(BCM43xx_SPROM_SIZE * sizeof(u16) <= PAGE_SIZE);
+ sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
+ GFP_KERNEL);
+ if (!sprom)
+ return -ENOMEM;
+ bcm43xx_lock_mmio(bcm, flags);
+ assert(bcm->initialized);
+ err = bcm43xx_sprom_read(bcm, sprom);
+ if (!err) {
+ for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+ buf[i * 2] = sprom[i] & 0x00FF;
+ buf[i * 2 + 1] = (sprom[i] & 0xFF00) >> 8;
+ }
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+ kfree(sprom);
+
+ return err ? err : BCM43xx_SPROM_SIZE * sizeof(u16);
+}
+
+static ssize_t bcm43xx_attr_sprom_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+ u16 *sprom;
+ unsigned long flags;
+ int i, err;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (count != BCM43xx_SPROM_SIZE * sizeof(u16))
+ return -EINVAL;
+ sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
+ GFP_KERNEL);
+ if (!sprom)
+ return -ENOMEM;
+ for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+ sprom[i] = buf[i * 2] & 0xFF;
+ sprom[i] |= ((u16)(buf[i * 2 + 1] & 0xFF)) << 8;
+ }
+ bcm43xx_lock_mmio(bcm, flags);
+ assert(bcm->initialized);
+ err = bcm43xx_sprom_write(bcm, sprom);
+ bcm43xx_unlock_mmio(bcm, flags);
+ kfree(sprom);
+
+ return err ? err : count;
+
+}
+
+static ssize_t bcm43xx_attr_interfmode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+ unsigned long flags;
+ int err;
+ ssize_t count = 0;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ bcm43xx_lock(bcm, flags);
+ assert(bcm->initialized);
+
+ switch (bcm43xx_current_radio(bcm)->interfmode) {
+ case BCM43xx_RADIO_INTERFMODE_NONE:
+ count = snprintf(buf, PAGE_SIZE, "0 (No Interference Mitigation)\n");
+ break;
+ case BCM43xx_RADIO_INTERFMODE_NONWLAN:
+ count = snprintf(buf, PAGE_SIZE, "1 (Non-WLAN Interference Mitigation)\n");
+ break;
+ case BCM43xx_RADIO_INTERFMODE_MANUALWLAN:
+ count = snprintf(buf, PAGE_SIZE, "2 (WLAN Interference Mitigation)\n");
+ break;
+ default:
+ assert(0);
+ }
+ err = 0;
+
+ bcm43xx_unlock(bcm, flags);
+
+ return err ? err : count;
+
+}
+
+static ssize_t bcm43xx_attr_interfmode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+ unsigned long flags;
+ int err;
+ int mode;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ mode = get_integer(buf, count);
+ switch (mode) {
+ case 0:
+ mode = BCM43xx_RADIO_INTERFMODE_NONE;
+ break;
+ case 1:
+ mode = BCM43xx_RADIO_INTERFMODE_NONWLAN;
+ break;
+ case 2:
+ mode = BCM43xx_RADIO_INTERFMODE_MANUALWLAN;
+ break;
+ case 3:
+ mode = BCM43xx_RADIO_INTERFMODE_AUTOWLAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ bcm43xx_lock_mmio(bcm, flags);
+ assert(bcm->initialized);
+
+ err = bcm43xx_radio_set_interference_mitigation(bcm, mode);
+ if (err) {
+ printk(KERN_ERR PFX "Interference Mitigation not "
+ "supported by device\n");
+ }
+
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err ? err : count;
+}
+
+static ssize_t bcm43xx_attr_preamble_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+ unsigned long flags;
+ int err;
+ ssize_t count;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ bcm43xx_lock(bcm, flags);
+ assert(bcm->initialized);
+
+ if (bcm->short_preamble)
+ count = snprintf(buf, PAGE_SIZE, "1 (Short Preamble enabled)\n");
+ else
+ count = snprintf(buf, PAGE_SIZE, "0 (Short Preamble disabled)\n");
+
+ err = 0;
+ bcm43xx_unlock(bcm, flags);
+
+ return err ? err : count;
+}
+
+static ssize_t bcm43xx_attr_preamble_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+ unsigned long flags;
+ int err;
+ int value;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ value = get_boolean(buf, count);
+ if (value < 0)
+ return value;
+ bcm43xx_lock(bcm, flags);
+ assert(bcm->initialized);
+
+ bcm->short_preamble = !!value;
+
+ err = 0;
+ bcm43xx_unlock(bcm, flags);
+
+ return err ? err : count;
+}
+
+int bcm43xx_sysfs_register(struct bcm43xx_private *bcm)
+{
+ struct device *dev = &bcm->pci_dev->dev;
+ struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
+ int err;
+
+ assert(bcm->initialized);
+
+ sysfs->attr_sprom.attr.name = "sprom";
+ sysfs->attr_sprom.attr.owner = THIS_MODULE;
+ sysfs->attr_sprom.attr.mode = 0600;
+ sysfs->attr_sprom.show = bcm43xx_attr_sprom_show;
+ sysfs->attr_sprom.store = bcm43xx_attr_sprom_store;
+ err = device_create_file(dev, &sysfs->attr_sprom);
+ if (err)
+ goto out;
+
+ sysfs->attr_interfmode.attr.name = "interference";
+ sysfs->attr_interfmode.attr.owner = THIS_MODULE;
+ sysfs->attr_interfmode.attr.mode = 0600;
+ sysfs->attr_interfmode.show = bcm43xx_attr_interfmode_show;
+ sysfs->attr_interfmode.store = bcm43xx_attr_interfmode_store;
+ err = device_create_file(dev, &sysfs->attr_interfmode);
+ if (err)
+ goto err_remove_sprom;
+
+ sysfs->attr_preamble.attr.name = "shortpreamble";
+ sysfs->attr_preamble.attr.owner = THIS_MODULE;
+ sysfs->attr_preamble.attr.mode = 0600;
+ sysfs->attr_preamble.show = bcm43xx_attr_preamble_show;
+ sysfs->attr_preamble.store = bcm43xx_attr_preamble_store;
+ err = device_create_file(dev, &sysfs->attr_preamble);
+ if (err)
+ goto err_remove_interfmode;
+
+out:
+ return err;
+err_remove_interfmode:
+ device_remove_file(dev, &sysfs->attr_interfmode);
+err_remove_sprom:
+ device_remove_file(dev, &sysfs->attr_sprom);
+ goto out;
+}
+
+void bcm43xx_sysfs_unregister(struct bcm43xx_private *bcm)
+{
+ struct device *dev = &bcm->pci_dev->dev;
+ struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
+
+ device_remove_file(dev, &sysfs->attr_preamble);
+ device_remove_file(dev, &sysfs->attr_interfmode);
+ device_remove_file(dev, &sysfs->attr_sprom);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
new file mode 100644
index 0000000..57f1451
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
@@ -0,0 +1,25 @@
+#ifndef BCM43xx_SYSFS_H_
+#define BCM43xx_SYSFS_H_
+
+#include <linux/device.h>
+
+
+struct bcm43xx_sysfs {
+ struct device_attribute attr_sprom;
+ struct device_attribute attr_interfmode;
+ struct device_attribute attr_preamble;
+};
+
+#define devattr_to_bcm(attr, attr_name) ({ \
+ struct bcm43xx_sysfs *__s; struct bcm43xx_private *__p; \
+ __s = container_of((attr), struct bcm43xx_sysfs, attr_name); \
+ __p = container_of(__s, struct bcm43xx_private, sysfs); \
+ __p; \
+ })
+
+struct bcm43xx_private;
+
+int bcm43xx_sysfs_register(struct bcm43xx_private *bcm);
+void bcm43xx_sysfs_unregister(struct bcm43xx_private *bcm);
+
+#endif /* BCM43xx_SYSFS_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
new file mode 100644
index 0000000..3daee82
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -0,0 +1,1002 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/ieee80211softmac.h>
+#include <net/ieee80211softmac_wx.h>
+#include <linux/capability.h>
+#include <linux/sched.h> /* for capable() */
+#include <linux/delay.h>
+
+#include "bcm43xx.h"
+#include "bcm43xx_wx.h"
+#include "bcm43xx_main.h"
+#include "bcm43xx_radio.h"
+#include "bcm43xx_phy.h"
+
+
+/* The WIRELESS_EXT version, which is implemented by this driver. */
+#define BCM43xx_WX_VERSION 18
+
+#define MAX_WX_STRING 80
+
+
+static int bcm43xx_wx_get_name(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int i;
+ struct bcm43xx_phyinfo *phy;
+ char suffix[7] = { 0 };
+ int have_a = 0, have_b = 0, have_g = 0;
+
+ bcm43xx_lock(bcm, flags);
+ for (i = 0; i < bcm->nr_80211_available; i++) {
+ phy = &(bcm->core_80211_ext[i].phy);
+ switch (phy->type) {
+ case BCM43xx_PHYTYPE_A:
+ have_a = 1;
+ break;
+ case BCM43xx_PHYTYPE_G:
+ have_g = 1;
+ case BCM43xx_PHYTYPE_B:
+ have_b = 1;
+ break;
+ default:
+ assert(0);
+ }
+ }
+ bcm43xx_unlock(bcm, flags);
+
+ i = 0;
+ if (have_a) {
+ suffix[i++] = 'a';
+ suffix[i++] = '/';
+ }
+ if (have_b) {
+ suffix[i++] = 'b';
+ suffix[i++] = '/';
+ }
+ if (have_g) {
+ suffix[i++] = 'g';
+ suffix[i++] = '/';
+ }
+ if (i != 0)
+ suffix[i - 1] = '\0';
+
+ snprintf(data->name, IFNAMSIZ, "IEEE 802.11%s", suffix);
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_channelfreq(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ u8 channel;
+ int freq;
+ int err = -EINVAL;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if ((data->freq.m >= 0) && (data->freq.m <= 1000)) {
+ channel = data->freq.m;
+ freq = bcm43xx_channel_to_freq(bcm, channel);
+ } else {
+ channel = bcm43xx_freq_to_channel(bcm, data->freq.m);
+ freq = data->freq.m;
+ }
+ if (!bcm43xx_is_valid_channel(bcm, channel))
+ goto out_unlock;
+ if (bcm->initialized) {
+ //ieee80211softmac_disassoc(softmac, $REASON);
+ bcm43xx_mac_suspend(bcm);
+ err = bcm43xx_radio_selectchannel(bcm, channel, 0);
+ bcm43xx_mac_enable(bcm);
+ } else {
+ bcm43xx_current_radio(bcm)->initial_channel = channel;
+ err = 0;
+ }
+out_unlock:
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_channelfreq(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct bcm43xx_radioinfo *radio;
+ unsigned long flags;
+ int err = -ENODEV;
+ u16 channel;
+
+ bcm43xx_lock(bcm, flags);
+ radio = bcm43xx_current_radio(bcm);
+ channel = radio->channel;
+ if (channel == 0xFF) {
+ assert(!bcm->initialized);
+ channel = radio->initial_channel;
+ if (channel == 0xFF)
+ goto out_unlock;
+ }
+ assert(channel > 0 && channel <= 1000);
+ data->freq.e = 1;
+ data->freq.m = bcm43xx_channel_to_freq(bcm, channel) * 100000;
+ data->freq.flags = 1;
+
+ err = 0;
+out_unlock:
+ bcm43xx_unlock(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_set_mode(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int mode;
+
+ mode = data->mode;
+ if (mode == IW_MODE_AUTO)
+ mode = BCM43xx_INITIAL_IWMODE;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (bcm->ieee->iw_mode != mode)
+ bcm43xx_set_iwmode(bcm, mode);
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_get_mode(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock(bcm, flags);
+ data->mode = bcm->ieee->iw_mode;
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct iw_range *range = (struct iw_range *)extra;
+ const struct ieee80211_geo *geo;
+ unsigned long flags;
+ int i, j;
+ struct bcm43xx_phyinfo *phy;
+
+ data->data.length = sizeof(*range);
+ memset(range, 0, sizeof(*range));
+
+ //TODO: What about 802.11b?
+ /* 54Mb/s == ~27Mb/s payload throughput (802.11g) */
+ range->throughput = 27 * 1000 * 1000;
+
+ range->max_qual.qual = 100;
+ /* TODO: Real max RSSI */
+ range->max_qual.level = 3;
+ range->max_qual.noise = 100;
+ range->max_qual.updated = 7;
+
+ range->avg_qual.qual = 70;
+ range->avg_qual.level = 2;
+ range->avg_qual.noise = 40;
+ range->avg_qual.updated = 7;
+
+ range->min_rts = BCM43xx_MIN_RTS_THRESHOLD;
+ range->max_rts = BCM43xx_MAX_RTS_THRESHOLD;
+ range->min_frag = MIN_FRAG_THRESHOLD;
+ range->max_frag = MAX_FRAG_THRESHOLD;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13;
+ range->num_encoding_sizes = 2;
+ range->max_encoding_tokens = WEP_KEYS;
+
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = BCM43xx_WX_VERSION;
+
+ range->enc_capa = IW_ENC_CAPA_WPA |
+ IW_ENC_CAPA_WPA2 |
+ IW_ENC_CAPA_CIPHER_TKIP |
+ IW_ENC_CAPA_CIPHER_CCMP;
+
+ bcm43xx_lock(bcm, flags);
+ phy = bcm43xx_current_phy(bcm);
+
+ range->num_bitrates = 0;
+ i = 0;
+ if (phy->type == BCM43xx_PHYTYPE_A ||
+ phy->type == BCM43xx_PHYTYPE_G) {
+ range->num_bitrates = 8;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB;
+ }
+ if (phy->type == BCM43xx_PHYTYPE_B ||
+ phy->type == BCM43xx_PHYTYPE_G) {
+ range->num_bitrates += 4;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_1MB;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_2MB;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_5MB;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_11MB;
+ }
+
+ geo = ieee80211_get_geo(bcm->ieee);
+ range->num_channels = geo->a_channels + geo->bg_channels;
+ j = 0;
+ for (i = 0; i < geo->a_channels; i++) {
+ if (j == IW_MAX_FREQUENCIES)
+ break;
+ range->freq[j].i = j + 1;
+ range->freq[j].m = geo->a[i].freq;//FIXME?
+ range->freq[j].e = 1;
+ j++;
+ }
+ for (i = 0; i < geo->bg_channels; i++) {
+ if (j == IW_MAX_FREQUENCIES)
+ break;
+ range->freq[j].i = j + 1;
+ range->freq[j].m = geo->bg[i].freq;//FIXME?
+ range->freq[j].e = 1;
+ j++;
+ }
+ range->num_frequency = j;
+
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_nick(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ size_t len;
+
+ bcm43xx_lock(bcm, flags);
+ len = min((size_t)data->data.length, (size_t)IW_ESSID_MAX_SIZE);
+ memcpy(bcm->nick, extra, len);
+ bcm->nick[len] = '\0';
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_get_nick(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ size_t len;
+
+ bcm43xx_lock(bcm, flags);
+ len = strlen(bcm->nick) + 1;
+ memcpy(extra, bcm->nick, len);
+ data->data.length = (__u16)len;
+ data->data.flags = 1;
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_rts(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int err = -EINVAL;
+
+ bcm43xx_lock(bcm, flags);
+ if (data->rts.disabled) {
+ bcm->rts_threshold = BCM43xx_MAX_RTS_THRESHOLD;
+ err = 0;
+ } else {
+ if (data->rts.value >= BCM43xx_MIN_RTS_THRESHOLD &&
+ data->rts.value <= BCM43xx_MAX_RTS_THRESHOLD) {
+ bcm->rts_threshold = data->rts.value;
+ err = 0;
+ }
+ }
+ bcm43xx_unlock(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_rts(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock(bcm, flags);
+ data->rts.value = bcm->rts_threshold;
+ data->rts.fixed = 0;
+ data->rts.disabled = (bcm->rts_threshold == BCM43xx_MAX_RTS_THRESHOLD);
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_frag(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int err = -EINVAL;
+
+ bcm43xx_lock(bcm, flags);
+ if (data->frag.disabled) {
+ bcm->ieee->fts = MAX_FRAG_THRESHOLD;
+ err = 0;
+ } else {
+ if (data->frag.value >= MIN_FRAG_THRESHOLD &&
+ data->frag.value <= MAX_FRAG_THRESHOLD) {
+ bcm->ieee->fts = data->frag.value & ~0x1;
+ err = 0;
+ }
+ }
+ bcm43xx_unlock(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_frag(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock(bcm, flags);
+ data->frag.value = bcm->ieee->fts;
+ data->frag.fixed = 0;
+ data->frag.disabled = (bcm->ieee->fts == MAX_FRAG_THRESHOLD);
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_xmitpower(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct bcm43xx_radioinfo *radio;
+ struct bcm43xx_phyinfo *phy;
+ unsigned long flags;
+ int err = -ENODEV;
+ u16 maxpower;
+
+ if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) {
+ printk(PFX KERN_ERR "TX power not in dBm.\n");
+ return -EOPNOTSUPP;
+ }
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (!bcm->initialized)
+ goto out_unlock;
+ radio = bcm43xx_current_radio(bcm);
+ phy = bcm43xx_current_phy(bcm);
+ if (data->txpower.disabled != (!(radio->enabled))) {
+ if (data->txpower.disabled)
+ bcm43xx_radio_turn_off(bcm);
+ else
+ bcm43xx_radio_turn_on(bcm);
+ }
+ if (data->txpower.value > 0) {
+ /* desired and maxpower dBm values are in Q5.2 */
+ if (phy->type == BCM43xx_PHYTYPE_A)
+ maxpower = bcm->sprom.maxpower_aphy;
+ else
+ maxpower = bcm->sprom.maxpower_bgphy;
+ radio->txpower_desired = limit_value(data->txpower.value << 2,
+ 0, maxpower);
+ bcm43xx_phy_xmitpower(bcm);
+ }
+ err = 0;
+
+out_unlock:
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_xmitpower(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct bcm43xx_radioinfo *radio;
+ unsigned long flags;
+ int err = -ENODEV;
+
+ bcm43xx_lock(bcm, flags);
+ if (!bcm->initialized)
+ goto out_unlock;
+ radio = bcm43xx_current_radio(bcm);
+ /* desired dBm value is in Q5.2 */
+ data->txpower.value = radio->txpower_desired >> 2;
+ data->txpower.fixed = 1;
+ data->txpower.flags = IW_TXPOW_DBM;
+ data->txpower.disabled = !(radio->enabled);
+
+ err = 0;
+out_unlock:
+ bcm43xx_unlock(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_set_encoding(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err;
+
+ err = ieee80211_wx_set_encode(bcm->ieee, info, data, extra);
+
+ return err;
+}
+
+static int bcm43xx_wx_set_encodingext(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err;
+
+ err = ieee80211_wx_set_encodeext(bcm->ieee, info, data, extra);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_encoding(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err;
+
+ err = ieee80211_wx_get_encode(bcm->ieee, info, data, extra);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_encodingext(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err;
+
+ err = ieee80211_wx_get_encodeext(bcm->ieee, info, data, extra);
+
+ return err;
+}
+
+static int bcm43xx_wx_set_interfmode(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int mode, err = 0;
+
+ mode = *((int *)extra);
+ switch (mode) {
+ case 0:
+ mode = BCM43xx_RADIO_INTERFMODE_NONE;
+ break;
+ case 1:
+ mode = BCM43xx_RADIO_INTERFMODE_NONWLAN;
+ break;
+ case 2:
+ mode = BCM43xx_RADIO_INTERFMODE_MANUALWLAN;
+ break;
+ case 3:
+ mode = BCM43xx_RADIO_INTERFMODE_AUTOWLAN;
+ break;
+ default:
+ printk(KERN_ERR PFX "set_interfmode allowed parameters are: "
+ "0 => None, 1 => Non-WLAN, 2 => WLAN, "
+ "3 => Auto-WLAN\n");
+ return -EINVAL;
+ }
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (bcm->initialized) {
+ err = bcm43xx_radio_set_interference_mitigation(bcm, mode);
+ if (err) {
+ printk(KERN_ERR PFX "Interference Mitigation not "
+ "supported by device\n");
+ }
+ } else {
+ if (mode == BCM43xx_RADIO_INTERFMODE_AUTOWLAN) {
+ printk(KERN_ERR PFX "Interference Mitigation mode Auto-WLAN "
+ "not supported while the interface is down.\n");
+ err = -ENODEV;
+ } else
+ bcm43xx_current_radio(bcm)->interfmode = mode;
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err;
+}
+
+static int bcm43xx_wx_get_interfmode(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int mode;
+
+ bcm43xx_lock(bcm, flags);
+ mode = bcm43xx_current_radio(bcm)->interfmode;
+ bcm43xx_unlock(bcm, flags);
+
+ switch (mode) {
+ case BCM43xx_RADIO_INTERFMODE_NONE:
+ strncpy(extra, "0 (No Interference Mitigation)", MAX_WX_STRING);
+ break;
+ case BCM43xx_RADIO_INTERFMODE_NONWLAN:
+ strncpy(extra, "1 (Non-WLAN Interference Mitigation)", MAX_WX_STRING);
+ break;
+ case BCM43xx_RADIO_INTERFMODE_MANUALWLAN:
+ strncpy(extra, "2 (WLAN Interference Mitigation)", MAX_WX_STRING);
+ break;
+ default:
+ assert(0);
+ }
+ data->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_shortpreamble(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int on;
+
+ on = *((int *)extra);
+ bcm43xx_lock(bcm, flags);
+ bcm->short_preamble = !!on;
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_get_shortpreamble(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int on;
+
+ bcm43xx_lock(bcm, flags);
+ on = bcm->short_preamble;
+ bcm43xx_unlock(bcm, flags);
+
+ if (on)
+ strncpy(extra, "1 (Short Preamble enabled)", MAX_WX_STRING);
+ else
+ strncpy(extra, "0 (Short Preamble disabled)", MAX_WX_STRING);
+ data->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+static int bcm43xx_wx_set_swencryption(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int on;
+
+ on = *((int *)extra);
+
+ bcm43xx_lock(bcm, flags);
+ bcm->ieee->host_encrypt = !!on;
+ bcm->ieee->host_decrypt = !!on;
+ bcm->ieee->host_build_iv = !on;
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static int bcm43xx_wx_get_swencryption(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int on;
+
+ bcm43xx_lock(bcm, flags);
+ on = bcm->ieee->host_encrypt;
+ bcm43xx_unlock(bcm, flags);
+
+ if (on)
+ strncpy(extra, "1 (SW encryption enabled) ", MAX_WX_STRING);
+ else
+ strncpy(extra, "0 (SW encryption disabled) ", MAX_WX_STRING);
+ data->data.length = strlen(extra + 1);
+
+ return 0;
+}
+
+/* Enough buffer to hold a hexdump of the sprom data. */
+#define SPROM_BUFFERSIZE 512
+
+static int sprom2hex(const u16 *sprom, char *dump)
+{
+ int i, pos = 0;
+
+ for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+ pos += snprintf(dump + pos, SPROM_BUFFERSIZE - pos - 1,
+ "%04X", swab16(sprom[i]) & 0xFFFF);
+ }
+
+ return pos + 1;
+}
+
+static int hex2sprom(u16 *sprom, const char *dump, unsigned int len)
+{
+ char tmp[5] = { 0 };
+ int cnt = 0;
+ unsigned long parsed;
+
+ if (len < BCM43xx_SPROM_SIZE * sizeof(u16) * 2)
+ return -EINVAL;
+ while (cnt < BCM43xx_SPROM_SIZE) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+ parsed = simple_strtoul(tmp, NULL, 16);
+ sprom[cnt++] = swab16((u16)parsed);
+ }
+
+ return 0;
+}
+
+static int bcm43xx_wx_sprom_read(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err = -EPERM;
+ u16 *sprom;
+ unsigned long flags;
+
+ if (!capable(CAP_SYS_RAWIO))
+ goto out;
+
+ err = -ENOMEM;
+ sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
+ GFP_KERNEL);
+ if (!sprom)
+ goto out;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ err = -ENODEV;
+ if (bcm->initialized)
+ err = bcm43xx_sprom_read(bcm, sprom);
+ bcm43xx_unlock_mmio(bcm, flags);
+ if (!err)
+ data->data.length = sprom2hex(sprom, extra);
+ kfree(sprom);
+out:
+ return err;
+}
+
+static int bcm43xx_wx_sprom_write(struct net_device *net_dev,
+ struct iw_request_info *info,
+ union iwreq_data *data,
+ char *extra)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ int err = -EPERM;
+ u16 *sprom;
+ unsigned long flags;
+ char *input;
+ unsigned int len;
+
+ if (!capable(CAP_SYS_RAWIO))
+ goto out;
+
+ err = -ENOMEM;
+ sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
+ GFP_KERNEL);
+ if (!sprom)
+ goto out;
+
+ len = data->data.length;
+ extra[len - 1] = '\0';
+ input = strchr(extra, ':');
+ if (input) {
+ input++;
+ len -= input - extra;
+ } else
+ input = extra;
+ err = hex2sprom(sprom, input, len);
+ if (err)
+ goto out_kfree;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ err = -ENODEV;
+ if (bcm->initialized)
+ err = bcm43xx_sprom_write(bcm, sprom);
+ bcm43xx_unlock_mmio(bcm, flags);
+out_kfree:
+ kfree(sprom);
+out:
+ return err;
+}
+
+/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
+
+static struct iw_statistics *bcm43xx_get_wireless_stats(struct net_device *net_dev)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ struct ieee80211softmac_device *mac = ieee80211_priv(net_dev);
+ struct iw_statistics *wstats;
+
+ wstats = &bcm->stats.wstats;
+ if (!mac->associated) {
+ wstats->miss.beacon = 0;
+// bcm->ieee->ieee_stats.tx_retry_limit_exceeded = 0; // FIXME: should this be cleared here?
+ wstats->discard.retries = 0;
+// bcm->ieee->ieee_stats.tx_discards_wrong_sa = 0; // FIXME: same question
+ wstats->discard.nwid = 0;
+// bcm->ieee->ieee_stats.rx_discards_undecryptable = 0; // FIXME: ditto
+ wstats->discard.code = 0;
+// bcm->ieee->ieee_stats.rx_fragments = 0; // FIXME: same here
+ wstats->discard.fragment = 0;
+ wstats->discard.misc = 0;
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
+ IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
+ return wstats;
+ }
+ /* fill in the real statistics when iface associated */
+ wstats->qual.qual = 100; // TODO: get the real signal quality
+ wstats->qual.level = 3 - bcm->stats.link_quality;
+ wstats->qual.noise = bcm->stats.noise;
+ wstats->qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
+ IW_QUAL_NOISE_UPDATED;
+ wstats->discard.code = bcm->ieee->ieee_stats.rx_discards_undecryptable;
+ wstats->discard.retries = bcm->ieee->ieee_stats.tx_retry_limit_exceeded;
+ wstats->discard.nwid = bcm->ieee->ieee_stats.tx_discards_wrong_sa;
+ wstats->discard.fragment = bcm->ieee->ieee_stats.rx_fragments;
+ wstats->discard.misc = 0; // FIXME
+ wstats->miss.beacon = 0; // FIXME
+ return wstats;
+}
+
+
+#ifdef WX
+# undef WX
+#endif
+#define WX(ioctl) [(ioctl) - SIOCSIWCOMMIT]
+static const iw_handler bcm43xx_wx_handlers[] = {
+ /* Wireless Identification */
+ WX(SIOCGIWNAME) = bcm43xx_wx_get_name,
+ /* Basic operations */
+ WX(SIOCSIWFREQ) = bcm43xx_wx_set_channelfreq,
+ WX(SIOCGIWFREQ) = bcm43xx_wx_get_channelfreq,
+ WX(SIOCSIWMODE) = bcm43xx_wx_set_mode,
+ WX(SIOCGIWMODE) = bcm43xx_wx_get_mode,
+ /* Informative stuff */
+ WX(SIOCGIWRANGE) = bcm43xx_wx_get_rangeparams,
+ /* Access Point manipulation */
+ WX(SIOCSIWAP) = ieee80211softmac_wx_set_wap,
+ WX(SIOCGIWAP) = ieee80211softmac_wx_get_wap,
+ WX(SIOCSIWSCAN) = ieee80211softmac_wx_trigger_scan,
+ WX(SIOCGIWSCAN) = ieee80211softmac_wx_get_scan_results,
+ /* 802.11 specific support */
+ WX(SIOCSIWESSID) = ieee80211softmac_wx_set_essid,
+ WX(SIOCGIWESSID) = ieee80211softmac_wx_get_essid,
+ WX(SIOCSIWNICKN) = bcm43xx_wx_set_nick,
+ WX(SIOCGIWNICKN) = bcm43xx_wx_get_nick,
+ /* Other parameters */
+ WX(SIOCSIWRATE) = ieee80211softmac_wx_set_rate,
+ WX(SIOCGIWRATE) = ieee80211softmac_wx_get_rate,
+ WX(SIOCSIWRTS) = bcm43xx_wx_set_rts,
+ WX(SIOCGIWRTS) = bcm43xx_wx_get_rts,
+ WX(SIOCSIWFRAG) = bcm43xx_wx_set_frag,
+ WX(SIOCGIWFRAG) = bcm43xx_wx_get_frag,
+ WX(SIOCSIWTXPOW) = bcm43xx_wx_set_xmitpower,
+ WX(SIOCGIWTXPOW) = bcm43xx_wx_get_xmitpower,
+//TODO WX(SIOCSIWRETRY) = bcm43xx_wx_set_retry,
+//TODO WX(SIOCGIWRETRY) = bcm43xx_wx_get_retry,
+ /* Encoding */
+ WX(SIOCSIWENCODE) = bcm43xx_wx_set_encoding,
+ WX(SIOCGIWENCODE) = bcm43xx_wx_get_encoding,
+ WX(SIOCSIWENCODEEXT) = bcm43xx_wx_set_encodingext,
+ WX(SIOCGIWENCODEEXT) = bcm43xx_wx_get_encodingext,
+ /* Power saving */
+//TODO WX(SIOCSIWPOWER) = bcm43xx_wx_set_power,
+//TODO WX(SIOCGIWPOWER) = bcm43xx_wx_get_power,
+ WX(SIOCSIWGENIE) = ieee80211softmac_wx_set_genie,
+ WX(SIOCGIWGENIE) = ieee80211softmac_wx_get_genie,
+ WX(SIOCSIWAUTH) = ieee80211_wx_set_auth,
+ WX(SIOCGIWAUTH) = ieee80211_wx_get_auth,
+};
+#undef WX
+
+static const iw_handler bcm43xx_priv_wx_handlers[] = {
+ /* Set Interference Mitigation Mode. */
+ bcm43xx_wx_set_interfmode,
+ /* Get Interference Mitigation Mode. */
+ bcm43xx_wx_get_interfmode,
+ /* Enable/Disable Short Preamble mode. */
+ bcm43xx_wx_set_shortpreamble,
+ /* Get Short Preamble mode. */
+ bcm43xx_wx_get_shortpreamble,
+ /* Enable/Disable Software Encryption mode */
+ bcm43xx_wx_set_swencryption,
+ /* Get Software Encryption mode */
+ bcm43xx_wx_get_swencryption,
+ /* Write SRPROM data. */
+ bcm43xx_wx_sprom_write,
+ /* Read SPROM data. */
+ bcm43xx_wx_sprom_read,
+};
+
+#define PRIV_WX_SET_INTERFMODE (SIOCIWFIRSTPRIV + 0)
+#define PRIV_WX_GET_INTERFMODE (SIOCIWFIRSTPRIV + 1)
+#define PRIV_WX_SET_SHORTPREAMBLE (SIOCIWFIRSTPRIV + 2)
+#define PRIV_WX_GET_SHORTPREAMBLE (SIOCIWFIRSTPRIV + 3)
+#define PRIV_WX_SET_SWENCRYPTION (SIOCIWFIRSTPRIV + 4)
+#define PRIV_WX_GET_SWENCRYPTION (SIOCIWFIRSTPRIV + 5)
+#define PRIV_WX_SPROM_WRITE (SIOCIWFIRSTPRIV + 6)
+#define PRIV_WX_SPROM_READ (SIOCIWFIRSTPRIV + 7)
+
+#define PRIV_WX_DUMMY(ioctl) \
+ { \
+ .cmd = (ioctl), \
+ .name = "__unused" \
+ }
+
+static const struct iw_priv_args bcm43xx_priv_wx_args[] = {
+ {
+ .cmd = PRIV_WX_SET_INTERFMODE,
+ .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "set_interfmode",
+ },
+ {
+ .cmd = PRIV_WX_GET_INTERFMODE,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ .name = "get_interfmode",
+ },
+ {
+ .cmd = PRIV_WX_SET_SHORTPREAMBLE,
+ .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "set_shortpreambl",
+ },
+ {
+ .cmd = PRIV_WX_GET_SHORTPREAMBLE,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ .name = "get_shortpreambl",
+ },
+ {
+ .cmd = PRIV_WX_SET_SWENCRYPTION,
+ .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "set_swencryption",
+ },
+ {
+ .cmd = PRIV_WX_GET_SWENCRYPTION,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ .name = "get_swencryption",
+ },
+ {
+ .cmd = PRIV_WX_SPROM_WRITE,
+ .set_args = IW_PRIV_TYPE_CHAR | SPROM_BUFFERSIZE,
+ .name = "write_sprom",
+ },
+ {
+ .cmd = PRIV_WX_SPROM_READ,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | SPROM_BUFFERSIZE,
+ .name = "read_sprom",
+ },
+};
+
+const struct iw_handler_def bcm43xx_wx_handlers_def = {
+ .standard = bcm43xx_wx_handlers,
+ .num_standard = ARRAY_SIZE(bcm43xx_wx_handlers),
+ .num_private = ARRAY_SIZE(bcm43xx_priv_wx_handlers),
+ .num_private_args = ARRAY_SIZE(bcm43xx_priv_wx_args),
+ .private = bcm43xx_priv_wx_handlers,
+ .private_args = bcm43xx_priv_wx_args,
+ .get_wireless_stats = bcm43xx_get_wireless_stats,
+};
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.h b/drivers/net/wireless/bcm43xx/bcm43xx_wx.h
new file mode 100644
index 0000000..1f29ff3
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.h
@@ -0,0 +1,36 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ Some parts of the code in this file are derived from the ipw2200
+ driver Copyright(c) 2003 - 2004 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#ifndef BCM43xx_WX_H_
+#define BCM43xx_WX_H_
+
+extern const struct iw_handler_def bcm43xx_wx_handlers_def;
+
+#endif /* BCM43xx_WX_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c
new file mode 100644
index 0000000..d8ece28
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c
@@ -0,0 +1,582 @@
+/*
+
+ Broadcom BCM43xx wireless driver
+
+ Transmission (TX/RX) related functions.
+
+ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+ Stefano Brivio <st3@riseup.net>
+ Michael Buesch <mbuesch@freenet.de>
+ Danny van Dyk <kugelfang@gentoo.org>
+ Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "bcm43xx_xmit.h"
+
+#include <linux/etherdevice.h>
+
+
+/* Extract the bitrate out of a CCK PLCP header. */
+static u8 bcm43xx_plcp_get_bitrate_cck(struct bcm43xx_plcp_hdr4 *plcp)
+{
+ switch (plcp->raw[0]) {
+ case 0x0A:
+ return IEEE80211_CCK_RATE_1MB;
+ case 0x14:
+ return IEEE80211_CCK_RATE_2MB;
+ case 0x37:
+ return IEEE80211_CCK_RATE_5MB;
+ case 0x6E:
+ return IEEE80211_CCK_RATE_11MB;
+ }
+ assert(0);
+ return 0;
+}
+
+/* Extract the bitrate out of an OFDM PLCP header. */
+static u8 bcm43xx_plcp_get_bitrate_ofdm(struct bcm43xx_plcp_hdr4 *plcp)
+{
+ switch (plcp->raw[0] & 0xF) {
+ case 0xB:
+ return IEEE80211_OFDM_RATE_6MB;
+ case 0xF:
+ return IEEE80211_OFDM_RATE_9MB;
+ case 0xA:
+ return IEEE80211_OFDM_RATE_12MB;
+ case 0xE:
+ return IEEE80211_OFDM_RATE_18MB;
+ case 0x9:
+ return IEEE80211_OFDM_RATE_24MB;
+ case 0xD:
+ return IEEE80211_OFDM_RATE_36MB;
+ case 0x8:
+ return IEEE80211_OFDM_RATE_48MB;
+ case 0xC:
+ return IEEE80211_OFDM_RATE_54MB;
+ }
+ assert(0);
+ return 0;
+}
+
+u8 bcm43xx_plcp_get_ratecode_cck(const u8 bitrate)
+{
+ switch (bitrate) {
+ case IEEE80211_CCK_RATE_1MB:
+ return 0x0A;
+ case IEEE80211_CCK_RATE_2MB:
+ return 0x14;
+ case IEEE80211_CCK_RATE_5MB:
+ return 0x37;
+ case IEEE80211_CCK_RATE_11MB:
+ return 0x6E;
+ }
+ assert(0);
+ return 0;
+}
+
+u8 bcm43xx_plcp_get_ratecode_ofdm(const u8 bitrate)
+{
+ switch (bitrate) {
+ case IEEE80211_OFDM_RATE_6MB:
+ return 0xB;
+ case IEEE80211_OFDM_RATE_9MB:
+ return 0xF;
+ case IEEE80211_OFDM_RATE_12MB:
+ return 0xA;
+ case IEEE80211_OFDM_RATE_18MB:
+ return 0xE;
+ case IEEE80211_OFDM_RATE_24MB:
+ return 0x9;
+ case IEEE80211_OFDM_RATE_36MB:
+ return 0xD;
+ case IEEE80211_OFDM_RATE_48MB:
+ return 0x8;
+ case IEEE80211_OFDM_RATE_54MB:
+ return 0xC;
+ }
+ assert(0);
+ return 0;
+}
+
+static void bcm43xx_generate_plcp_hdr(struct bcm43xx_plcp_hdr4 *plcp,
+ const u16 octets, const u8 bitrate,
+ const int ofdm_modulation)
+{
+ __le32 *data = &(plcp->data);
+ __u8 *raw = plcp->raw;
+
+ if (ofdm_modulation) {
+ *data = bcm43xx_plcp_get_ratecode_ofdm(bitrate);
+ assert(!(octets & 0xF000));
+ *data |= (octets << 5);
+ *data = cpu_to_le32(*data);
+ } else {
+ u32 plen;
+
+ plen = octets * 16 / bitrate;
+ if ((octets * 16 % bitrate) > 0) {
+ plen++;
+ if ((bitrate == IEEE80211_CCK_RATE_11MB)
+ && ((octets * 8 % 11) < 4)) {
+ raw[1] = 0x84;
+ } else
+ raw[1] = 0x04;
+ } else
+ raw[1] = 0x04;
+ *data |= cpu_to_le32(plen << 16);
+ raw[0] = bcm43xx_plcp_get_ratecode_cck(bitrate);
+ }
+}
+
+static u8 bcm43xx_calc_fallback_rate(u8 bitrate)
+{
+ switch (bitrate) {
+ case IEEE80211_CCK_RATE_1MB:
+ return IEEE80211_CCK_RATE_1MB;
+ case IEEE80211_CCK_RATE_2MB:
+ return IEEE80211_CCK_RATE_1MB;
+ case IEEE80211_CCK_RATE_5MB:
+ return IEEE80211_CCK_RATE_2MB;
+ case IEEE80211_CCK_RATE_11MB:
+ return IEEE80211_CCK_RATE_5MB;
+ case IEEE80211_OFDM_RATE_6MB:
+ return IEEE80211_CCK_RATE_5MB;
+ case IEEE80211_OFDM_RATE_9MB:
+ return IEEE80211_OFDM_RATE_6MB;
+ case IEEE80211_OFDM_RATE_12MB:
+ return IEEE80211_OFDM_RATE_9MB;
+ case IEEE80211_OFDM_RATE_18MB:
+ return IEEE80211_OFDM_RATE_12MB;
+ case IEEE80211_OFDM_RATE_24MB:
+ return IEEE80211_OFDM_RATE_18MB;
+ case IEEE80211_OFDM_RATE_36MB:
+ return IEEE80211_OFDM_RATE_24MB;
+ case IEEE80211_OFDM_RATE_48MB:
+ return IEEE80211_OFDM_RATE_36MB;
+ case IEEE80211_OFDM_RATE_54MB:
+ return IEEE80211_OFDM_RATE_48MB;
+ }
+ assert(0);
+ return 0;
+}
+
+static
+__le16 bcm43xx_calc_duration_id(const struct ieee80211_hdr *wireless_header,
+ u8 bitrate)
+{
+ const u16 frame_ctl = le16_to_cpu(wireless_header->frame_ctl);
+ __le16 duration_id = wireless_header->duration_id;
+
+ switch (WLAN_FC_GET_TYPE(frame_ctl)) {
+ case IEEE80211_FTYPE_DATA:
+ case IEEE80211_FTYPE_MGMT:
+ //TODO: Steal the code from ieee80211, once it is completed there.
+ break;
+ case IEEE80211_FTYPE_CTL:
+ /* Use the original duration/id. */
+ break;
+ default:
+ assert(0);
+ }
+
+ return duration_id;
+}
+
+static inline
+u16 ceiling_div(u16 dividend, u16 divisor)
+{
+ return ((dividend + divisor - 1) / divisor);
+}
+
+static void bcm43xx_generate_rts(const struct bcm43xx_phyinfo *phy,
+ struct bcm43xx_txhdr *txhdr,
+ u16 *flags,
+ u8 bitrate,
+ const struct ieee80211_hdr_4addr *wlhdr)
+{
+ u16 fctl;
+ u16 dur;
+ u8 fallback_bitrate;
+ int ofdm_modulation;
+ int fallback_ofdm_modulation;
+// u8 *sa, *da;
+ u16 flen;
+
+//FIXME sa = ieee80211_get_SA((struct ieee80211_hdr *)wlhdr);
+//FIXME da = ieee80211_get_DA((struct ieee80211_hdr *)wlhdr);
+ fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate);
+ ofdm_modulation = !(ieee80211_is_cck_rate(bitrate));
+ fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate));
+
+ flen = sizeof(u16) + sizeof(u16) + ETH_ALEN + ETH_ALEN + IEEE80211_FCS_LEN,
+ bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->rts_cts_plcp),
+ flen, bitrate,
+ !ieee80211_is_cck_rate(bitrate));
+ bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->rts_cts_fallback_plcp),
+ flen, fallback_bitrate,
+ !ieee80211_is_cck_rate(fallback_bitrate));
+ fctl = IEEE80211_FTYPE_CTL;
+ fctl |= IEEE80211_STYPE_RTS;
+ dur = le16_to_cpu(wlhdr->duration_id);
+/*FIXME: should we test for dur==0 here and let it unmodified in this case?
+ * The following assert checks for this case...
+ */
+assert(dur);
+/*FIXME: The duration calculation is not really correct.
+ * I am not 100% sure which bitrate to use. We use the RTS rate here,
+ * but this is likely to be wrong.
+ */
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ /* Three times SIFS */
+ dur += 16 * 3;
+ /* Add ACK duration. */
+ dur += ceiling_div((16 + 8 * (14 /*bytes*/) + 6) * 10,
+ bitrate * 4);
+ /* Add CTS duration. */
+ dur += ceiling_div((16 + 8 * (14 /*bytes*/) + 6) * 10,
+ bitrate * 4);
+ } else {
+ /* Three times SIFS */
+ dur += 10 * 3;
+ /* Add ACK duration. */
+ dur += ceiling_div(8 * (14 /*bytes*/) * 10,
+ bitrate);
+ /* Add CTS duration. */
+ dur += ceiling_div(8 * (14 /*bytes*/) * 10,
+ bitrate);
+ }
+
+ txhdr->rts_cts_frame_control = cpu_to_le16(fctl);
+ txhdr->rts_cts_dur = cpu_to_le16(dur);
+//printk(BCM43xx_MACFMT " " BCM43xx_MACFMT " " BCM43xx_MACFMT "\n", BCM43xx_MACARG(wlhdr->addr1), BCM43xx_MACARG(wlhdr->addr2), BCM43xx_MACARG(wlhdr->addr3));
+//printk(BCM43xx_MACFMT " " BCM43xx_MACFMT "\n", BCM43xx_MACARG(sa), BCM43xx_MACARG(da));
+ memcpy(txhdr->rts_cts_mac1, wlhdr->addr1, ETH_ALEN);//FIXME!
+// memcpy(txhdr->rts_cts_mac2, sa, ETH_ALEN);
+
+ *flags |= BCM43xx_TXHDRFLAG_RTSCTS;
+ *flags |= BCM43xx_TXHDRFLAG_RTS;
+ if (ofdm_modulation)
+ *flags |= BCM43xx_TXHDRFLAG_RTSCTS_OFDM;
+ if (fallback_ofdm_modulation)
+ *flags |= BCM43xx_TXHDRFLAG_RTSCTSFALLBACK_OFDM;
+}
+
+void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm,
+ struct bcm43xx_txhdr *txhdr,
+ const unsigned char *fragment_data,
+ const unsigned int fragment_len,
+ const int is_first_fragment,
+ const u16 cookie)
+{
+ const struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ const struct ieee80211_hdr_4addr *wireless_header = (const struct ieee80211_hdr_4addr *)fragment_data;
+ const struct ieee80211_security *secinfo = &bcm->ieee->sec;
+ u8 bitrate;
+ u8 fallback_bitrate;
+ int ofdm_modulation;
+ int fallback_ofdm_modulation;
+ u16 plcp_fragment_len = fragment_len;
+ u16 flags = 0;
+ u16 control = 0;
+ u16 wsec_rate = 0;
+ u16 encrypt_frame;
+
+ /* Now construct the TX header. */
+ memset(txhdr, 0, sizeof(*txhdr));
+
+ bitrate = bcm->softmac->txrates.default_rate;
+ ofdm_modulation = !(ieee80211_is_cck_rate(bitrate));
+ fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate);
+ fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate));
+
+ /* Set Frame Control from 80211 header. */
+ txhdr->frame_control = wireless_header->frame_ctl;
+ /* Copy address1 from 80211 header. */
+ memcpy(txhdr->mac1, wireless_header->addr1, 6);
+ /* Set the fallback duration ID. */
+ txhdr->fallback_dur_id = bcm43xx_calc_duration_id((const struct ieee80211_hdr *)wireless_header,
+ fallback_bitrate);
+ /* Set the cookie (used as driver internal ID for the frame) */
+ txhdr->cookie = cpu_to_le16(cookie);
+
+ /* Hardware appends FCS. */
+ plcp_fragment_len += IEEE80211_FCS_LEN;
+
+ /* Hardware encryption. */
+ encrypt_frame = le16_to_cpup(&wireless_header->frame_ctl) & IEEE80211_FCTL_PROTECTED;
+ if (encrypt_frame && !bcm->ieee->host_encrypt) {
+ const struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *)wireless_header;
+ memcpy(txhdr->wep_iv, hdr->payload, 4);
+ /* Hardware appends ICV. */
+ plcp_fragment_len += 4;
+
+ wsec_rate |= (bcm->key[secinfo->active_key].algorithm << BCM43xx_TXHDR_WSEC_ALGO_SHIFT)
+ & BCM43xx_TXHDR_WSEC_ALGO_MASK;
+ wsec_rate |= (secinfo->active_key << BCM43xx_TXHDR_WSEC_KEYINDEX_SHIFT)
+ & BCM43xx_TXHDR_WSEC_KEYINDEX_MASK;
+ }
+
+ /* Generate the PLCP header and the fallback PLCP header. */
+ bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->plcp),
+ plcp_fragment_len,
+ bitrate, ofdm_modulation);
+ bcm43xx_generate_plcp_hdr(&txhdr->fallback_plcp, plcp_fragment_len,
+ fallback_bitrate, fallback_ofdm_modulation);
+
+ /* Set the CONTROL field */
+ if (ofdm_modulation)
+ control |= BCM43xx_TXHDRCTL_OFDM;
+ if (bcm->short_preamble) //FIXME: could be the other way around, please test
+ control |= BCM43xx_TXHDRCTL_SHORT_PREAMBLE;
+ control |= (phy->antenna_diversity << BCM43xx_TXHDRCTL_ANTENNADIV_SHIFT)
+ & BCM43xx_TXHDRCTL_ANTENNADIV_MASK;
+
+ /* Set the FLAGS field */
+ if (!is_multicast_ether_addr(wireless_header->addr1) &&
+ !is_broadcast_ether_addr(wireless_header->addr1))
+ flags |= BCM43xx_TXHDRFLAG_EXPECTACK;
+ if (1 /* FIXME: PS poll?? */)
+ flags |= 0x10; // FIXME: unknown meaning.
+ if (fallback_ofdm_modulation)
+ flags |= BCM43xx_TXHDRFLAG_FALLBACKOFDM;
+ if (is_first_fragment)
+ flags |= BCM43xx_TXHDRFLAG_FIRSTFRAGMENT;
+
+ /* Set WSEC/RATE field */
+ wsec_rate |= (txhdr->plcp.raw[0] << BCM43xx_TXHDR_RATE_SHIFT)
+ & BCM43xx_TXHDR_RATE_MASK;
+
+ /* Generate the RTS/CTS packet, if required. */
+ /* FIXME: We should first try with CTS-to-self,
+ * if we are on 80211g. If we get too many
+ * failures (hidden nodes), we should switch back to RTS/CTS.
+ */
+ if (0/*FIXME txctl->use_rts_cts*/) {
+ bcm43xx_generate_rts(phy, txhdr, &flags,
+ 0/*FIXME txctl->rts_cts_rate*/,
+ wireless_header);
+ }
+
+ txhdr->flags = cpu_to_le16(flags);
+ txhdr->control = cpu_to_le16(control);
+ txhdr->wsec_rate = cpu_to_le16(wsec_rate);
+}
+
+static s8 bcm43xx_rssi_postprocess(struct bcm43xx_private *bcm,
+ u8 in_rssi, int ofdm,
+ int adjust_2053, int adjust_2050)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ s32 tmp;
+
+ switch (radio->version) {
+ case 0x2050:
+ if (ofdm) {
+ tmp = in_rssi;
+ if (tmp > 127)
+ tmp -= 256;
+ tmp *= 73;
+ tmp /= 64;
+ if (adjust_2050)
+ tmp += 25;
+ else
+ tmp -= 3;
+ } else {
+ if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) {
+ if (in_rssi > 63)
+ in_rssi = 63;
+ tmp = radio->nrssi_lt[in_rssi];
+ tmp = 31 - tmp;
+ tmp *= -131;
+ tmp /= 128;
+ tmp -= 57;
+ } else {
+ tmp = in_rssi;
+ tmp = 31 - tmp;
+ tmp *= -149;
+ tmp /= 128;
+ tmp -= 68;
+ }
+ if (phy->type == BCM43xx_PHYTYPE_G &&
+ adjust_2050)
+ tmp += 25;
+ }
+ break;
+ case 0x2060:
+ if (in_rssi > 127)
+ tmp = in_rssi - 256;
+ else
+ tmp = in_rssi;
+ break;
+ default:
+ tmp = in_rssi;
+ tmp -= 11;
+ tmp *= 103;
+ tmp /= 64;
+ if (adjust_2053)
+ tmp -= 109;
+ else
+ tmp -= 83;
+ }
+
+ return (s8)tmp;
+}
+
+//TODO
+#if 0
+static s8 bcm43xx_rssinoise_postprocess(struct bcm43xx_private *bcm,
+ u8 in_rssi)
+{
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ s8 ret;
+
+ if (phy->type == BCM43xx_PHYTYPE_A) {
+ //TODO: Incomplete specs.
+ ret = 0;
+ } else
+ ret = bcm43xx_rssi_postprocess(bcm, in_rssi, 0, 1, 1);
+
+ return ret;
+}
+#endif
+
+int bcm43xx_rx(struct bcm43xx_private *bcm,
+ struct sk_buff *skb,
+ struct bcm43xx_rxhdr *rxhdr)
+{
+ struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
+ struct bcm43xx_plcp_hdr4 *plcp;
+ struct ieee80211_rx_stats stats;
+ struct ieee80211_hdr_4addr *wlhdr;
+ u16 frame_ctl;
+ int is_packet_for_us = 0;
+ int err = -EINVAL;
+ const u16 rxflags1 = le16_to_cpu(rxhdr->flags1);
+ const u16 rxflags2 = le16_to_cpu(rxhdr->flags2);
+ const u16 rxflags3 = le16_to_cpu(rxhdr->flags3);
+ const int is_ofdm = !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_OFDM);
+
+ if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME) {
+ plcp = (struct bcm43xx_plcp_hdr4 *)(skb->data + 2);
+ /* Skip two unknown bytes and the PLCP header. */
+ skb_pull(skb, 2 + sizeof(struct bcm43xx_plcp_hdr6));
+ } else {
+ plcp = (struct bcm43xx_plcp_hdr4 *)(skb->data);
+ /* Skip the PLCP header. */
+ skb_pull(skb, sizeof(struct bcm43xx_plcp_hdr6));
+ }
+ /* The SKB contains the PAYLOAD (wireless header + data)
+ * at this point. The FCS at the end is stripped.
+ */
+
+ memset(&stats, 0, sizeof(stats));
+ stats.mac_time = le16_to_cpu(rxhdr->mactime);
+ stats.rssi = bcm43xx_rssi_postprocess(bcm, rxhdr->rssi, is_ofdm,
+ !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_2053RSSIADJ),
+ !!(rxflags3 & BCM43xx_RXHDR_FLAGS3_2050RSSIADJ));
+ stats.signal = rxhdr->signal_quality; //FIXME
+//TODO stats.noise =
+ if (is_ofdm)
+ stats.rate = bcm43xx_plcp_get_bitrate_ofdm(plcp);
+ else
+ stats.rate = bcm43xx_plcp_get_bitrate_cck(plcp);
+//printk("RX ofdm %d, rate == %u\n", is_ofdm, stats.rate);
+ stats.received_channel = radio->channel;
+//TODO stats.control =
+ stats.mask = IEEE80211_STATMASK_SIGNAL |
+//TODO IEEE80211_STATMASK_NOISE |
+ IEEE80211_STATMASK_RATE |
+ IEEE80211_STATMASK_RSSI;
+ if (phy->type == BCM43xx_PHYTYPE_A)
+ stats.freq = IEEE80211_52GHZ_BAND;
+ else
+ stats.freq = IEEE80211_24GHZ_BAND;
+ stats.len = skb->len;
+
+ bcm->stats.last_rx = jiffies;
+ if (bcm->ieee->iw_mode == IW_MODE_MONITOR) {
+ err = ieee80211_rx(bcm->ieee, skb, &stats);
+ return (err == 0) ? -EINVAL : 0;
+ }
+
+ wlhdr = (struct ieee80211_hdr_4addr *)(skb->data);
+
+ switch (bcm->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ if (memcmp(wlhdr->addr1, bcm->net_dev->dev_addr, ETH_ALEN) == 0 ||
+ memcmp(wlhdr->addr3, bcm->ieee->bssid, ETH_ALEN) == 0 ||
+ is_broadcast_ether_addr(wlhdr->addr1) ||
+ is_multicast_ether_addr(wlhdr->addr1) ||
+ bcm->net_dev->flags & IFF_PROMISC)
+ is_packet_for_us = 1;
+ break;
+ case IW_MODE_INFRA:
+ default:
+ /* When receiving multicast or broadcast packets, filter out
+ the packets we send ourself; we shouldn't see those */
+ if (memcmp(wlhdr->addr3, bcm->ieee->bssid, ETH_ALEN) == 0 ||
+ memcmp(wlhdr->addr1, bcm->net_dev->dev_addr, ETH_ALEN) == 0 ||
+ (memcmp(wlhdr->addr3, bcm->net_dev->dev_addr, ETH_ALEN) &&
+ (is_broadcast_ether_addr(wlhdr->addr1) ||
+ is_multicast_ether_addr(wlhdr->addr1) ||
+ bcm->net_dev->flags & IFF_PROMISC)))
+ is_packet_for_us = 1;
+ break;
+ }
+
+ frame_ctl = le16_to_cpu(wlhdr->frame_ctl);
+ if ((frame_ctl & IEEE80211_FCTL_PROTECTED) && !bcm->ieee->host_decrypt) {
+ frame_ctl &= ~IEEE80211_FCTL_PROTECTED;
+ wlhdr->frame_ctl = cpu_to_le16(frame_ctl);
+ /* trim IV and ICV */
+ /* FIXME: this must be done only for WEP encrypted packets */
+ if (skb->len < 32) {
+ dprintkl(KERN_ERR PFX "RX packet dropped (PROTECTED flag "
+ "set and length < 32)\n");
+ return -EINVAL;
+ } else {
+ memmove(skb->data + 4, skb->data, 24);
+ skb_pull(skb, 4);
+ skb_trim(skb, skb->len - 4);
+ stats.len -= 8;
+ }
+ wlhdr = (struct ieee80211_hdr_4addr *)(skb->data);
+ }
+
+ switch (WLAN_FC_GET_TYPE(frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ ieee80211_rx_mgt(bcm->ieee, wlhdr, &stats);
+ break;
+ case IEEE80211_FTYPE_DATA:
+ if (is_packet_for_us) {
+ err = ieee80211_rx(bcm->ieee, skb, &stats);
+ err = (err == 0) ? -EINVAL : 0;
+ }
+ break;
+ case IEEE80211_FTYPE_CTL:
+ break;
+ default:
+ assert(0);
+ return -EINVAL;
+ }
+
+ return err;
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
new file mode 100644
index 0000000..2aed19e
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
@@ -0,0 +1,156 @@
+#ifndef BCM43xx_XMIT_H_
+#define BCM43xx_XMIT_H_
+
+#include "bcm43xx_main.h"
+
+
+#define _bcm43xx_declare_plcp_hdr(size) \
+ struct bcm43xx_plcp_hdr##size { \
+ union { \
+ __le32 data; \
+ __u8 raw[size]; \
+ } __attribute__((__packed__)); \
+ } __attribute__((__packed__))
+
+/* struct bcm43xx_plcp_hdr4 */
+_bcm43xx_declare_plcp_hdr(4);
+/* struct bcm43xx_plcp_hdr6 */
+_bcm43xx_declare_plcp_hdr(6);
+
+#undef _bcm43xx_declare_plcp_hdr
+
+/* Device specific TX header. To be prepended to TX frames. */
+struct bcm43xx_txhdr {
+ union {
+ struct {
+ __le16 flags;
+ __le16 wsec_rate;
+ __le16 frame_control;
+ u16 unknown_zeroed_0;
+ __le16 control;
+ u8 wep_iv[10];
+ u8 unknown_wsec_tkip_data[3]; //FIXME
+ PAD_BYTES(3);
+ u8 mac1[6];
+ u16 unknown_zeroed_1;
+ struct bcm43xx_plcp_hdr4 rts_cts_fallback_plcp;
+ __le16 rts_cts_dur_fallback;
+ struct bcm43xx_plcp_hdr4 fallback_plcp;
+ __le16 fallback_dur_id;
+ PAD_BYTES(2);
+ __le16 cookie;
+ __le16 unknown_scb_stuff; //FIXME
+ struct bcm43xx_plcp_hdr6 rts_cts_plcp;
+ __le16 rts_cts_frame_control;
+ __le16 rts_cts_dur;
+ u8 rts_cts_mac1[6];
+ u8 rts_cts_mac2[6];
+ PAD_BYTES(2);
+ struct bcm43xx_plcp_hdr6 plcp;
+ } __attribute__((__packed__));
+ u8 raw[82];
+ } __attribute__((__packed__));
+} __attribute__((__packed__));
+
+/* Values/Masks for the device TX header */
+#define BCM43xx_TXHDRFLAG_EXPECTACK 0x0001
+#define BCM43xx_TXHDRFLAG_RTSCTS 0x0002
+#define BCM43xx_TXHDRFLAG_RTS 0x0004
+#define BCM43xx_TXHDRFLAG_FIRSTFRAGMENT 0x0008
+#define BCM43xx_TXHDRFLAG_DESTPSMODE 0x0020
+#define BCM43xx_TXHDRFLAG_RTSCTS_OFDM 0x0080
+#define BCM43xx_TXHDRFLAG_FALLBACKOFDM 0x0100
+#define BCM43xx_TXHDRFLAG_RTSCTSFALLBACK_OFDM 0x0200
+#define BCM43xx_TXHDRFLAG_CTS 0x0400
+#define BCM43xx_TXHDRFLAG_FRAMEBURST 0x0800
+
+#define BCM43xx_TXHDRCTL_OFDM 0x0001
+#define BCM43xx_TXHDRCTL_SHORT_PREAMBLE 0x0010
+#define BCM43xx_TXHDRCTL_ANTENNADIV_MASK 0x0030
+#define BCM43xx_TXHDRCTL_ANTENNADIV_SHIFT 8
+
+#define BCM43xx_TXHDR_RATE_MASK 0x0F00
+#define BCM43xx_TXHDR_RATE_SHIFT 8
+#define BCM43xx_TXHDR_RTSRATE_MASK 0xF000
+#define BCM43xx_TXHDR_RTSRATE_SHIFT 12
+#define BCM43xx_TXHDR_WSEC_KEYINDEX_MASK 0x00F0
+#define BCM43xx_TXHDR_WSEC_KEYINDEX_SHIFT 4
+#define BCM43xx_TXHDR_WSEC_ALGO_MASK 0x0003
+#define BCM43xx_TXHDR_WSEC_ALGO_SHIFT 0
+
+void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm,
+ struct bcm43xx_txhdr *txhdr,
+ const unsigned char *fragment_data,
+ const unsigned int fragment_len,
+ const int is_first_fragment,
+ const u16 cookie);
+
+/* RX header as received from the hardware. */
+struct bcm43xx_rxhdr {
+ /* Frame Length. Must be generated explicitely in PIO mode. */
+ __le16 frame_length;
+ PAD_BYTES(2);
+ /* Flags field 1 */
+ __le16 flags1;
+ u8 rssi;
+ u8 signal_quality;
+ PAD_BYTES(2);
+ /* Flags field 3 */
+ __le16 flags3;
+ /* Flags field 2 */
+ __le16 flags2;
+ /* Lower 16bits of the TSF at the time the frame started. */
+ __le16 mactime;
+ PAD_BYTES(14);
+} __attribute__((__packed__));
+
+#define BCM43xx_RXHDR_FLAGS1_OFDM (1 << 0)
+/*#define BCM43xx_RXHDR_FLAGS1_SIGNAL??? (1 << 3) FIXME */
+#define BCM43xx_RXHDR_FLAGS1_SHORTPREAMBLE (1 << 7)
+#define BCM43xx_RXHDR_FLAGS1_2053RSSIADJ (1 << 14)
+
+#define BCM43xx_RXHDR_FLAGS2_INVALIDFRAME (1 << 0)
+#define BCM43xx_RXHDR_FLAGS2_TYPE2FRAME (1 << 2)
+/*FIXME: WEP related flags */
+
+#define BCM43xx_RXHDR_FLAGS3_2050RSSIADJ (1 << 10)
+
+/* Transmit Status as received from the hardware. */
+struct bcm43xx_hwxmitstatus {
+ PAD_BYTES(4);
+ __le16 cookie;
+ u8 flags;
+ u8 cnt1:4,
+ cnt2:4;
+ PAD_BYTES(2);
+ __le16 seq;
+ __le16 unknown; //FIXME
+} __attribute__((__packed__));
+
+/* Transmit Status in CPU byteorder. */
+struct bcm43xx_xmitstatus {
+ u16 cookie;
+ u8 flags;
+ u8 cnt1:4,
+ cnt2:4;
+ u16 seq;
+ u16 unknown; //FIXME
+};
+
+#define BCM43xx_TXSTAT_FLAG_ACK 0x01
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x02
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x04
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x08
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x10
+#define BCM43xx_TXSTAT_FLAG_IGNORE 0x20
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x40
+//TODO #define BCM43xx_TXSTAT_FLAG_??? 0x80
+
+u8 bcm43xx_plcp_get_ratecode_cck(const u8 bitrate);
+u8 bcm43xx_plcp_get_ratecode_ofdm(const u8 bitrate);
+
+int bcm43xx_rx(struct bcm43xx_private *bcm,
+ struct sk_buff *skb,
+ struct bcm43xx_rxhdr *rxhdr);
+
+#endif /* BCM43xx_XMIT_H_ */
diff --git a/drivers/net/wireless/hostap/hostap_80211.h b/drivers/net/wireless/hostap/hostap_80211.h
index 1fc72fe..cc1ee7f 100644
--- a/drivers/net/wireless/hostap/hostap_80211.h
+++ b/drivers/net/wireless/hostap/hostap_80211.h
@@ -92,8 +92,6 @@
void hostap_dump_tx_80211(const char *name, struct sk_buff *skb);
int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev);
int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev);
-struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
- struct ieee80211_crypt_data *crypt);
int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev);
#endif /* HOSTAP_80211_H */
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index 4a85e63..06a5214 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -299,8 +299,8 @@
/* Called only from software IRQ */
-struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
- struct ieee80211_crypt_data *crypt)
+static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
+ struct ieee80211_crypt_data *crypt)
{
struct hostap_interface *iface;
local_info_t *local;
@@ -317,7 +317,7 @@
}
if (local->tkip_countermeasures &&
- crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
+ strcmp(crypt->ops->name, "TKIP") == 0) {
hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
@@ -469,7 +469,7 @@
}
if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt &&
- !(fc & IEEE80211_FCTL_VERS)) {
+ !(fc & IEEE80211_FCTL_PROTECTED)) {
no_encrypt = 1;
PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing "
"unencrypted EAPOL frame\n", dev->name);
@@ -535,5 +535,4 @@
EXPORT_SYMBOL(hostap_dump_tx_80211);
-EXPORT_SYMBOL(hostap_tx_encrypt);
EXPORT_SYMBOL(hostap_master_start_xmit);
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 93f8a8f..a5d8262 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1560,7 +1560,7 @@
*ioc_p = ioc;
ioc->hw_path = dev->hw_path;
- ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
+ ioc->ioc_regs = ioremap_nocache(dev->hpa.start, 4096);
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 3d1a7f9..6e8ed0c 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -5,6 +5,7 @@
** (c) Copyright 1999 SuSE GmbH
** (c) Copyright 1999,2000 Hewlett-Packard Company
** (c) Copyright 2000 Grant Grundler
+** (c) Copyright 2006 Helge Deller
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
@@ -785,7 +786,7 @@
if((io_addr & (1 << i)) == 0)
continue;
- start = (unsigned long)(signed int)(0xf0000000 | (i << 23));
+ start = F_EXTEND(0xf0000000UL) | (i << 23);
end = start + 8 * 1024 * 1024 - 1;
DBG("DINO RANGE %d is at 0x%lx-0x%lx\n", count,
@@ -996,7 +997,7 @@
}
dino_dev->hba.dev = dev;
- dino_dev->hba.base_addr = ioremap(hpa, 4096);
+ dino_dev->hba.base_addr = ioremap_nocache(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
spin_lock_init(&dino_dev->dinosaur_pen);
dino_dev->hba.iommu = ccio_get_iommu(dev);
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 3d94d86..9d3bd15 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -366,7 +366,7 @@
eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
}
}
- eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
+ eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
&eisa_dev.hba.lmmio_space);
init_eisa_pic();
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 8d7a363..7a458d5 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -879,7 +879,7 @@
return NULL;
}
- isi->addr = ioremap(hpa, 4096);
+ isi->addr = ioremap_nocache(hpa, 4096);
isi->isi_hpa = hpa;
isi->isi_version = iosapic_rd_version(isi);
isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index e8a2a4a..3fe4a77 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1213,7 +1213,7 @@
** Postable I/O port space is per PCI host adapter.
** base of 64MB PIOP region
*/
- lba_dev->iop_base = ioremap(p->start, 64 * 1024 * 1024);
+ lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024);
sprintf(lba_dev->hba.io_name, "PCI%02lx Ports",
lba_dev->hba.bus_num.start);
@@ -1525,7 +1525,7 @@
u32 func_class;
void *tmp_obj;
char *version;
- void __iomem *addr = ioremap(dev->hpa.start, 4096);
+ void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096);
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1619,7 +1619,7 @@
} else {
if (!astro_iop_base) {
/* Sprockets PDC uses NPIOP region */
- astro_iop_base = ioremap(LBA_PORT_BASE, 64 * 1024);
+ astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024);
pci_port = &lba_astro_port_ops;
}
@@ -1700,7 +1700,7 @@
*/
void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
{
- void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
+ void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096);
imask <<= 2; /* adjust for hints - 2 more bits */
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index a28e178..4e53be9 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -4,9 +4,8 @@
* Copyright (C) 2005-2006 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 0821747..42b32ff 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1642,9 +1642,9 @@
**
**************************************************************************/
-static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
+static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset)
{
- return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
+ return ioremap_nocache(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}
static void sba_hw_init(struct sba_device *sba_dev)
@@ -2040,7 +2040,7 @@
u32 func_class;
int i;
char *version;
- void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
+ void __iomem *sba_addr = ioremap_nocache(dev->hpa.start, SBA_FUNC_SIZE);
struct proc_dir_entry *info_entry, *bitmap_entry, *root;
sba_dump_ranges(sba_addr);
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ad6d3b2..719b863 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -12,6 +12,7 @@
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ * (C) Copyright 2006 Helge Deller <deller@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -388,43 +389,34 @@
return local_irq;
}
-static struct uart_port serial[] = {
- {
- .iotype = UPIO_PORT,
- .line = 0,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- },
- {
- .iotype = UPIO_PORT,
- .line = 1,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- }
-};
-
static void __devinit superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
-
- serial[0].iobase = sio_dev.sp1_base;
- serial[0].irq = SP1_IRQ;
- spin_lock_init(&serial[0].lock);
+ struct uart_port serial_port;
- retval = early_serial_setup(&serial[0]);
+ memset(&serial_port, 0, sizeof(serial_port));
+ serial_port.iotype = UPIO_PORT;
+ serial_port.type = PORT_16550A;
+ serial_port.uartclk = 115200*16;
+ serial_port.fifosize = 16;
+ spin_lock_init(&serial_port.lock);
+
+ /* serial port #1 */
+ serial_port.iobase = sio_dev.sp1_base;
+ serial_port.irq = SP1_IRQ;
+ serial_port.line = 0;
+ retval = early_serial_setup(&serial_port);
if (retval < 0) {
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
- serial[1].iobase = sio_dev.sp2_base;
- serial[1].irq = SP2_IRQ;
- spin_lock_init(&serial[1].lock);
- retval = early_serial_setup(&serial[1]);
-
+ /* serial port #2 */
+ serial_port.iobase = sio_dev.sp2_base;
+ serial_port.irq = SP2_IRQ;
+ serial_port.line = 1;
+ retval = early_serial_setup(&serial_port);
if (retval < 0)
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 0574efd..459e6e1 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -634,7 +634,7 @@
static int __devinit vrc4171_card_setup(char *options)
{
if (options == NULL || *options == '\0')
- return 0;
+ return 1;
if (strncmp(options, "irq:", 4) == 0) {
int irq;
@@ -644,7 +644,7 @@
vrc4171_irq = irq;
if (*options != ',')
- return 0;
+ return 1;
options++;
}
@@ -663,10 +663,10 @@
}
if (*options != ',')
- return 0;
+ return 1;
options++;
} else
- return 0;
+ return 1;
}
@@ -688,7 +688,7 @@
}
if (*options != ',')
- return 0;
+ return 1;
options++;
if (strncmp(options, "memnoprobe", 10) == 0)
@@ -700,7 +700,7 @@
}
}
- return 0;
+ return 1;
}
__setup("vrc4171_card=", vrc4171_card_setup);
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 57f38db..6004196 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -516,7 +516,7 @@
static int __devinit vrc4173_cardu_setup(char *options)
{
if (options == NULL || *options == '\0')
- return 0;
+ return 1;
if (strncmp(options, "cardu1:", 7) == 0) {
options += 7;
@@ -527,9 +527,9 @@
}
if (*options != ',')
- return 0;
+ return 1;
} else
- return 0;
+ return 1;
}
if (strncmp(options, "cardu2:", 7) == 0) {
@@ -538,7 +538,7 @@
cardu_sockets[CARDU2].noprobe = 1;
}
- return 0;
+ return 1;
}
__setup("vrc4173_cardu=", vrc4173_cardu_setup);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index ffba656..1bd82c4 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -293,6 +293,10 @@
board_ahci }, /* JMicron JMB360 */
{ 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* JMicron JMB363 */
+ { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ATI SB600 non-raid */
+ { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ATI SB600 raid */
{ } /* terminate list */
};
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 2d5be84..24e71b5 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -301,7 +301,7 @@
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
- { P0, P1, P2, P3 }, /* 00b */
+ { P0, P2, P1, P3 }, /* 00b */
{ IDE, IDE, P1, P3 }, /* 01b */
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
@@ -312,7 +312,7 @@
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
- { P0, P1, P2, P3 }, /* 00b */
+ { P0, P2, RV, RV }, /* 00b */
{ RV, RV, RV, RV },
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 3a8462e..24eb59e 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -2488,7 +2488,7 @@
}
ints[0] = i - 1;
internal_ibmmca_scsi_setup(cur, ints);
- return 0;
+ return 1;
}
__setup("ibmmcascsi=", option_setup);
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 459a4da..eb7bd31 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -112,7 +112,7 @@
hostdata->dev = &dev->dev;
dma_set_mask(&dev->dev, DMA_32BIT_MASK);
- hostdata->base = ioremap(base, 0x100);
+ hostdata->base = ioremap_nocache(base, 0x100);
hostdata->differential = 0;
if (dev->id.sversion == LASI_700_SVERSION) {
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 95d81d8..835dff0 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -703,6 +703,7 @@
struct ata_probe_ent *probe_ent =
ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
int p = 0;
+ unsigned long bmdma;
if (!probe_ent)
return NULL;
@@ -716,7 +717,12 @@
probe_ent->port[p].altstatus_addr =
probe_ent->port[p].ctl_addr =
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
ata_std_ports(&probe_ent->port[p]);
p++;
}
@@ -726,7 +732,13 @@
probe_ent->port[p].altstatus_addr =
probe_ent->port[p].ctl_addr =
pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ bmdma += 8;
+ if(inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
ata_std_ports(&probe_ent->port[p]);
p++;
}
@@ -740,6 +752,7 @@
struct ata_port_info *port, int port_num)
{
struct ata_probe_ent *probe_ent;
+ unsigned long bmdma;
probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
@@ -766,8 +779,13 @@
break;
}
- probe_ent->port[0].bmdma_addr =
- pci_resource_start(pdev, 4) + 8 * port_num;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma != 0) {
+ bmdma += 8 * port_num;
+ probe_ent->port[0].bmdma_addr = bmdma;
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ }
ata_std_ports(&probe_ent->port[0]);
return probe_ent;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d279666..e63c1ff 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -62,7 +62,9 @@
#include "libata.h"
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev);
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors);
static void ata_set_mode(struct ata_port *ap);
static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
struct ata_device *dev);
@@ -276,7 +278,7 @@
}
static const struct ata_xfer_ent {
- unsigned int shift, bits;
+ int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
{ ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
@@ -987,9 +989,7 @@
qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
@@ -1081,9 +1081,8 @@
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
- * devices. This function also takes care of EDD signature
- * misreporting (to be removed once EDD support is gone) and
- * issues ATA_CMD_INIT_DEV_PARAMS for pre-ATA4 drives.
+ * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
+ * for pre-ATA4 drives.
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -1095,7 +1094,6 @@
unsigned int *p_class, int post_reset, u16 **p_id)
{
unsigned int class = *p_class;
- unsigned int using_edd;
struct ata_taskfile tf;
unsigned int err_mask = 0;
u16 *id;
@@ -1104,12 +1102,6 @@
DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
- if (ap->ops->probe_reset ||
- ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
- using_edd = 0;
- else
- using_edd = 1;
-
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
@@ -1139,39 +1131,16 @@
err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
-
if (err_mask) {
rc = -EIO;
reason = "I/O error";
-
- if (err_mask & ~AC_ERR_DEV)
- goto err_out;
-
- /*
- * arg! EDD works for all test cases, but seems to return
- * the ATA signature for some ATAPI devices. Until the
- * reason for this is found and fixed, we fix up the mess
- * here. If IDENTIFY DEVICE returns command aborted
- * (as ATAPI devices do), then we issue an
- * IDENTIFY PACKET DEVICE.
- *
- * ATA software reset (SRST, the default) does not appear
- * to have this problem.
- */
- if ((using_edd) && (class == ATA_DEV_ATA)) {
- u8 err = tf.feature;
- if (err & ATA_ABORTED) {
- class = ATA_DEV_ATAPI;
- goto retry;
- }
- }
goto err_out;
}
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
- if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) {
+ if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
rc = -EINVAL;
reason = "device reports illegal type";
goto err_out;
@@ -1187,7 +1156,7 @@
* Some drives were very specific about that exact sequence.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
- err_mask = ata_dev_init_params(ap, dev);
+ err_mask = ata_dev_init_params(ap, dev, id[3], id[6]);
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
@@ -1440,7 +1409,11 @@
if (!found)
goto err_out_disable;
- ata_set_mode(ap);
+ if (ap->ops->set_mode)
+ ap->ops->set_mode(ap);
+ else
+ ata_set_mode(ap);
+
if (ap->flags & ATA_FLAG_PORT_DISABLED)
goto err_out_disable;
@@ -1845,7 +1818,7 @@
*/
static void ata_set_mode(struct ata_port *ap)
{
- int i, rc;
+ int i, rc, used_dma = 0;
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -1863,6 +1836,9 @@
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
+
+ if (dev->dma_mode)
+ used_dma = 1;
}
/* step 2: always set host PIO timings */
@@ -1884,6 +1860,17 @@
goto err_out;
}
+ /*
+ * Record simplex status. If we selected DMA then the other
+ * host channels are not permitted to do so.
+ */
+
+ if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX))
+ ap->host_set->simplex_claimed = 1;
+
+ /*
+ * Chip specific finalisation
+ */
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
@@ -2005,45 +1992,6 @@
ap->ops->dev_select(ap, 0);
}
-/**
- * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
- * @ap: Port to reset and probe
- *
- * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
- * probe the bus. Not often used these days.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host_set lock.
- *
- */
-
-static unsigned int ata_bus_edd(struct ata_port *ap)
-{
- struct ata_taskfile tf;
- unsigned long flags;
-
- /* set up execute-device-diag (bus reset) taskfile */
- /* also, take interrupts to a known state (disabled) */
- DPRINTK("execute-device-diag\n");
- ata_tf_init(ap, &tf, 0);
- tf.ctl |= ATA_NIEN;
- tf.command = ATA_CMD_EDD;
- tf.protocol = ATA_PROT_NODATA;
-
- /* do bus reset */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ata_tf_to_host(ap, &tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- /* spec says at least 2ms. but who knows with those
- * crazy ATAPI devices...
- */
- msleep(150);
-
- return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-}
-
static unsigned int ata_bus_softreset(struct ata_port *ap,
unsigned int devmask)
{
@@ -2078,13 +2026,12 @@
*/
msleep(150);
-
/* Before we perform post reset processing we want to see if
- the bus shows 0xFF because the odd clown forgets the D7 pulldown
- resistor */
-
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
if (ata_check_status(ap) == 0xFF)
- return 1; /* Positive is failure for some reason */
+ return AC_ERR_OTHER;
ata_bus_post_reset(ap, devmask);
@@ -2116,7 +2063,7 @@
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
u8 err;
- unsigned int dev0, dev1 = 0, rc = 0, devmask = 0;
+ unsigned int dev0, dev1 = 0, devmask = 0;
DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
@@ -2139,18 +2086,8 @@
/* issue bus reset */
if (ap->flags & ATA_FLAG_SRST)
- rc = ata_bus_softreset(ap, devmask);
- else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
- /* set up device control */
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
- rc = ata_bus_edd(ap);
- }
-
- if (rc)
- goto err_out;
+ if (ata_bus_softreset(ap, devmask))
+ goto err_out;
/*
* determine by signature whether we have ATA or ATAPI devices
@@ -2223,9 +2160,9 @@
* so makes reset sequence different from the original
* ->phy_reset implementation and Jeff nervous. :-P
*/
-extern void ata_std_probeinit(struct ata_port *ap)
+void ata_std_probeinit(struct ata_port *ap)
{
- if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
+ if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) {
sata_phy_resume(ap);
if (sata_dev_present(ap))
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
@@ -2714,18 +2651,23 @@
* known limits including host controller limits, device
* blacklist, etc...
*
+ * FIXME: The current implementation limits all transfer modes to
+ * the fastest of the lowested device on the port. This is not
+ * required on most controllers.
+ *
* LOCKING:
* None.
*/
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
{
+ struct ata_host_set *hs = ap->host_set;
unsigned long xfer_mask;
int i;
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ap->udma_mask);
- /* use port-wide xfermask for now */
+ /* FIXME: Use port-wide xfermask for now */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *d = &ap->device[i];
if (!ata_dev_present(d))
@@ -2735,12 +2677,23 @@
xfer_mask &= ata_id_xfermask(d->id);
if (ata_dma_blacklisted(d))
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ /* Apply cable rule here. Don't apply it early because when
+ we handle hot plug the cable type can itself change */
+ if (ap->cbl == ATA_CBL_PATA40)
+ xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
}
if (ata_dma_blacklisted(dev))
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
"disabling DMA\n", ap->id, dev->devno);
+ if (hs->flags & ATA_HOST_SIMPLEX) {
+ if (hs->simplex_claimed)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ }
+ if (ap->ops->mode_filter)
+ xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
}
@@ -2795,16 +2748,16 @@
*/
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev)
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
- u16 sectors = dev->id[6];
- u16 heads = dev->id[3];
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
- return 0;
+ return AC_ERR_INVALID;
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
@@ -4042,15 +3995,14 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
*/
-
-unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
+void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ qc->ap->active_tag = qc->tag;
+ qc->flags |= ATA_QCFLAG_ACTIVE;
+
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
@@ -4065,17 +4017,18 @@
ap->ops->qc_prep(qc);
- qc->ap->active_tag = qc->tag;
- qc->flags |= ATA_QCFLAG_ACTIVE;
-
- return ap->ops->qc_issue(qc);
+ qc->err_mask |= ap->ops->qc_issue(qc);
+ if (unlikely(qc->err_mask))
+ goto err;
+ return;
sg_err:
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- return AC_ERR_SYSTEM;
+ qc->err_mask |= AC_ERR_SYSTEM;
+err:
+ ata_qc_complete(qc);
}
-
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
@@ -4536,6 +4489,14 @@
int rc;
DPRINTK("ENTER\n");
+
+ if (!ent->port_ops->probe_reset &&
+ !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
+ printk(KERN_ERR "ata%u: no reset mechanism available\n",
+ port_no);
+ return NULL;
+ }
+
host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
if (!host)
return NULL;
@@ -4596,6 +4557,7 @@
host_set->mmio_base = ent->mmio_base;
host_set->private_data = ent->private_data;
host_set->ops = ent->port_ops;
+ host_set->flags = ent->host_set_flags;
/* register each port bound to this device */
for (i = 0; i < ent->n_ports; i++) {
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 628191b..53f5b0d 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1431,9 +1431,7 @@
goto early_finish;
/* select device, send command to hardware */
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
VPRINTK("EXIT\n");
return;
@@ -2199,9 +2197,7 @@
qc->complete_fn = atapi_sense_complete;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
DPRINTK("EXIT\n");
}
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 65f52be..1c755b1 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -47,7 +47,7 @@
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_port_flush_task(struct ata_port *ap);
extern void ata_qc_free(struct ata_queued_cmd *qc);
-extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc);
+extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index d6d2125..f852421 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1748,7 +1748,7 @@
static void set_mesh_power(struct mesh_state *ms, int state)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
if (state) {
pmac_call_feature(PMAC_FTR_MESH_ENABLE, macio_get_of_node(ms->mdev), 0, 1);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 275ed9b..fa901fd 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1010,7 +1010,7 @@
pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- pp->sg_tbl[i].flags_size = cpu_to_le32(len);
+ pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
sg_len -= len;
addr += len;
@@ -1350,7 +1350,6 @@
{
void __iomem *mmio = host_set->mmio_base;
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
int shift, port, port0, hard_port, handled;
@@ -1373,25 +1372,32 @@
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
u8 ata_status = 0;
- ap = host_set->ports[port];
+ struct ata_port *ap = host_set->ports[port];
+ struct mv_port_priv *pp = ap->private_data;
+
hard_port = port & MV_PORT_MASK; /* range 0-3 */
handled = 0; /* ensure ata_status is set if handled++ */
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
- /* new CRPB on the queue; just one at a time until NCQ
- */
- ata_status = mv_get_crpb_status(ap);
- handled++;
- } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
- /* received ATA IRQ; read the status reg to clear INTRQ
- */
- ata_status = readb((void __iomem *)
+ /* Note that DEV_IRQ might happen spuriously during EDMA,
+ * and should be ignored in such cases. We could mask it,
+ * but it's pretty rare and may not be worth the overhead.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ /* EDMA: check for response queue interrupt */
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ ata_status = mv_get_crpb_status(ap);
+ handled = 1;
+ }
+ } else {
+ /* PIO: check for device (drive) interrupt */
+ if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
- handled++;
+ handled = 1;
+ }
}
- if (ap &&
- (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
err_mask = ac_err_mask(ata_status);
@@ -1403,12 +1409,12 @@
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
err_mask |= AC_ERR_OTHER;
- handled++;
+ handled = 1;
}
- if (handled && ap) {
+ if (handled) {
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (NULL != qc) {
+ if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index b131432..a6cfbb3 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -88,7 +88,7 @@
struct gsc_irq gsc_irq;
u32 zalon_vers;
int error = -ENODEV;
- void __iomem *zalon = ioremap(dev->hpa.start, 4096);
+ void __iomem *zalon = ioremap_nocache(dev->hpa.start, 4096);
void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
static int unit = 0;
struct Scsi_Host *host;
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 8b49479..913c71c 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -52,13 +52,14 @@
address += 0x800;
}
- memset(&port, 0, sizeof(struct uart_port));
- port.mapbase = address;
- port.irq = dev->irq;
- port.iotype = UPIO_MEM;
- port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- port.uartclk = LASI_BASE_BAUD * 16;
- port.dev = &dev->dev;
+ memset(&port, 0, sizeof(port));
+ port.iotype = UPIO_MEM;
+ port.uartclk = LASI_BASE_BAUD * 16;
+ port.mapbase = address;
+ port.membase = ioremap_nocache(address, 16);
+ port.irq = dev->irq;
+ port.flags = UPF_BOOT_AUTOCONF;
+ port.dev = &dev->dev;
err = serial8250_register_port(&port);
if (err < 0) {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 4d48b62..7d82370 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -142,12 +142,14 @@
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct termios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- if (ch == port->info->tty->termios->c_cc[VSTART])
+ termios = port->info->tty->termios;
+ if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
- if (ch == port->info->tty->termios->c_cc[VSTOP])
+ if (ch == termios->c_cc[VSTOP])
channel->ch_bd->bd_ops->send_stop_character(channel);
spin_unlock_irqrestore(&port->lock, lock_flags);
}
@@ -178,6 +180,7 @@
struct jsm_board *brd;
int rc = 0;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct termios *termios;
/* Get board pointer from our array of majors we have allocated */
brd = channel->ch_bd;
@@ -239,12 +242,13 @@
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- channel->ch_c_cflag = port->info->tty->termios->c_cflag;
- channel->ch_c_iflag = port->info->tty->termios->c_iflag;
- channel->ch_c_oflag = port->info->tty->termios->c_oflag;
- channel->ch_c_lflag = port->info->tty->termios->c_lflag;
- channel->ch_startc = port->info->tty->termios->c_cc[VSTART];
- channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+ termios = port->info->tty->termios;
+ channel->ch_c_cflag = termios->c_cflag;
+ channel->ch_c_iflag = termios->c_iflag;
+ channel->ch_c_oflag = termios->c_oflag;
+ channel->ch_c_lflag = termios->c_lflag;
+ channel->ch_startc = termios->c_cc[VSTART];
+ channel->ch_stopc = termios->c_cc[VSTOP];
/* Tell UART to init itself */
brd->bd_ops->uart_init(channel);
@@ -784,6 +788,7 @@
void jsm_check_queue_flow_control(struct jsm_channel *ch)
{
+ struct board_ops *bd_ops = ch->ch_bd->bd_ops;
int qleft = 0;
/* Store how much space we have left in the queue */
@@ -809,7 +814,7 @@
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
- ch->ch_bd->bd_ops->disable_receiver(ch);
+ bd_ops->disable_receiver(ch);
ch->ch_flags |= (CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
@@ -819,7 +824,7 @@
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF) {
if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
- ch->ch_bd->bd_ops->send_stop_character(ch);
+ bd_ops->send_stop_character(ch);
ch->ch_stops_sent++;
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
@@ -846,7 +851,7 @@
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if (ch->ch_flags & CH_RECEIVER_OFF) {
- ch->ch_bd->bd_ops->enable_receiver(ch);
+ bd_ops->enable_receiver(ch);
ch->ch_flags &= ~(CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
@@ -856,7 +861,7 @@
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
ch->ch_stops_sent = 0;
- ch->ch_bd->bd_ops->send_start_character(ch);
+ bd_ops->send_start_character(ch);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
}
}
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 868eaf4..64c0e89 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -51,7 +51,7 @@
#define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
#define MUX_NR 256
-static unsigned int port_cnt = 0;
+static unsigned int port_cnt __read_mostly;
static struct uart_port mux_ports[MUX_NR];
static struct uart_driver mux_driver = {
@@ -461,7 +461,7 @@
port->iobase = 0;
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
- port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
+ port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
port->iotype = UPIO_MEM;
port->type = PORT_MUX;
port->irq = NO_IRQ;
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index e0afb5a..0d2193b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -296,7 +296,7 @@
#ifdef CONFIG_PPC_PMAC
/* Disable ASIC clocks for USB */
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
@@ -331,7 +331,7 @@
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index fe9b60c..9b1e4ed 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -1736,6 +1736,7 @@
.standard = (iw_handler *)zd1201_iw_handler,
.private = (iw_handler *)zd1201_private_handler,
.private_args = (struct iw_priv_args *) zd1201_private_args,
+ .get_wireless_stats = zd1201_get_wireless_stats,
};
static int zd1201_probe(struct usb_interface *interface,
@@ -1796,7 +1797,6 @@
zd->dev->open = zd1201_net_open;
zd->dev->stop = zd1201_net_stop;
zd->dev->get_stats = zd1201_get_stats;
- zd->dev->get_wireless_stats = zd1201_get_wireless_stats;
zd->dev->wireless_handlers =
(struct iw_handler_def *)&zd1201_iw_handlers;
zd->dev->hard_start_xmit = zd1201_hard_start_xmit;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 22e9d69..f87c017 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -904,18 +904,6 @@
There is no need for enabling 'Matrox multihead support' if you have
only one Matrox card in the box.
-config FB_RADEON_OLD
- tristate "ATI Radeon display support (Old driver)"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC
- help
- Choose this option if you want to use an ATI Radeon graphics card as
- a framebuffer device. There are both PCI and AGP versions. You
- don't need to choose this to run the Radeon in plain VGA mode.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index cb90218..23de3b2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -39,7 +39,6 @@
obj-$(CONFIG_FB_SAVAGE) += savage/
obj-$(CONFIG_FB_GEODE) += geode/
obj-$(CONFIG_FB_I810) += vgastate.o
-obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 821c6da..f7bbff4 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -67,6 +67,7 @@
#include <asm/io.h>
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1748,7 +1749,7 @@
var = default_var;
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
@@ -2011,7 +2012,7 @@
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank)
+ if (machine_is(powermac) && blank)
set_backlight_enable(0);
#endif /* CONFIG_PMAC_BACKLIGHT */
@@ -2029,7 +2030,7 @@
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && !blank)
+ if (machine_is(powermac) && !blank)
set_backlight_enable(1);
#endif /* CONFIG_PMAC_BACKLIGHT */
return 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e799fcc..b39e72d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -75,6 +75,7 @@
#include "ati_ids.h"
#ifdef __powerpc__
+#include <asm/machdep.h>
#include <asm/prom.h>
#include "../macmodes.h"
#endif
@@ -2518,7 +2519,7 @@
memset(&var, 0, sizeof(var));
#ifdef CONFIG_PPC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
/*
* FIXME: The NVRAM stuff should be put in a Mac-specific file, as it
* applies to all Mac video cards
@@ -2673,7 +2674,7 @@
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank > FB_BLANK_NORMAL)
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
set_backlight_enable(0);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
@@ -2705,7 +2706,7 @@
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank <= FB_BLANK_NORMAL)
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
set_backlight_enable(1);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 5886a2f..c709176 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -20,7 +20,7 @@
#include <linux/agp_backend.h>
#ifdef CONFIG_PPC_PMAC
-#include <asm/processor.h>
+#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/pmac_feature.h>
#endif
@@ -2745,7 +2745,7 @@
rinfo->pm_mode |= radeon_pm_off;
}
#if defined(CONFIG_PPC_PMAC)
- if (_machine == _MACH_Pmac && rinfo->of_node) {
+ if (machine_is(powermac) && rinfo->of_node) {
if (rinfo->is_mobility && rinfo->pm_reg &&
rinfo->family <= CHIP_FAMILY_RV250)
rinfo->pm_mode |= radeon_pm_d2;
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 9d996f2..b895eaa 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -43,11 +43,11 @@
default y
config BACKLIGHT_CORGI
- tristate "Sharp Corgi Backlight Driver (SL-C7xx Series)"
+ tristate "Sharp Corgi Backlight Driver (SL Series)"
depends on BACKLIGHT_DEVICE && PXA_SHARPSL
default y
help
- If you have a Sharp Zaurus SL-C7xx, say y to enable the
+ If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
backlight driver.
config BACKLIGHT_HP680
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 151fda8..334b1db 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -16,14 +16,12 @@
static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
- if (likely(bd->props && bd->props->get_power))
- rc = sprintf(buf, "%d\n", bd->props->get_power(bd));
- else
- rc = -ENXIO;
+ if (likely(bd->props))
+ rc = sprintf(buf, "%d\n", bd->props->power);
up(&bd->sem);
return rc;
@@ -31,7 +29,7 @@
static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, power;
+ int rc = -ENXIO, power;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
@@ -40,12 +38,13 @@
return -EINVAL;
down(&bd->sem);
- if (likely(bd->props && bd->props->set_power)) {
+ if (likely(bd->props)) {
pr_debug("backlight: set power to %d\n", power);
- bd->props->set_power(bd, power);
+ bd->props->power = power;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
rc = count;
- } else
- rc = -ENXIO;
+ }
up(&bd->sem);
return rc;
@@ -53,14 +52,12 @@
static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
- if (likely(bd->props && bd->props->get_brightness))
- rc = sprintf(buf, "%d\n", bd->props->get_brightness(bd));
- else
- rc = -ENXIO;
+ if (likely(bd->props))
+ rc = sprintf(buf, "%d\n", bd->props->brightness);
up(&bd->sem);
return rc;
@@ -68,7 +65,7 @@
static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, brightness;
+ int rc = -ENXIO, brightness;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
@@ -77,12 +74,18 @@
return -EINVAL;
down(&bd->sem);
- if (likely(bd->props && bd->props->set_brightness)) {
- pr_debug("backlight: set brightness to %d\n", brightness);
- bd->props->set_brightness(bd, brightness);
- rc = count;
- } else
- rc = -ENXIO;
+ if (likely(bd->props)) {
+ if (brightness > bd->props->max_brightness)
+ rc = -EINVAL;
+ else {
+ pr_debug("backlight: set brightness to %d\n",
+ brightness);
+ bd->props->brightness = brightness;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
+ rc = count;
+ }
+ }
up(&bd->sem);
return rc;
@@ -90,14 +93,26 @@
static ssize_t backlight_show_max_brightness(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
if (likely(bd->props))
rc = sprintf(buf, "%d\n", bd->props->max_brightness);
- else
- rc = -ENXIO;
+ up(&bd->sem);
+
+ return rc;
+}
+
+static ssize_t backlight_show_actual_brightness(struct class_device *cdev,
+ char *buf)
+{
+ int rc = -ENXIO;
+ struct backlight_device *bd = to_backlight_device(cdev);
+
+ down(&bd->sem);
+ if (likely(bd->props && bd->props->get_brightness))
+ rc = sprintf(buf, "%d\n", bd->props->get_brightness(bd));
up(&bd->sem);
return rc;
@@ -123,7 +138,10 @@
static struct class_device_attribute bl_class_device_attributes[] = {
DECLARE_ATTR(power, 0644, backlight_show_power, backlight_store_power),
- DECLARE_ATTR(brightness, 0644, backlight_show_brightness, backlight_store_brightness),
+ DECLARE_ATTR(brightness, 0644, backlight_show_brightness,
+ backlight_store_brightness),
+ DECLARE_ATTR(actual_brightness, 0444, backlight_show_actual_brightness,
+ NULL),
DECLARE_ATTR(max_brightness, 0444, backlight_show_max_brightness, NULL),
};
@@ -144,8 +162,12 @@
bd = container_of(self, struct backlight_device, fb_notif);
down(&bd->sem);
if (bd->props)
- if (!bd->props->check_fb || bd->props->check_fb(evdata->info))
- bd->props->set_power(bd, *(int *)evdata->data);
+ if (!bd->props->check_fb ||
+ bd->props->check_fb(evdata->info)) {
+ bd->props->fb_blank = *(int *)evdata->data;
+ if (likely(bd->props && bd->props->update_status))
+ bd->props->update_status(bd);
+ }
up(&bd->sem);
return 0;
}
@@ -231,6 +253,12 @@
&bl_class_device_attributes[i]);
down(&bd->sem);
+ if (likely(bd->props && bd->props->update_status)) {
+ bd->props->brightness = 0;
+ bd->props->power = 0;
+ bd->props->update_status(bd);
+ }
+
bd->props = NULL;
up(&bd->sem);
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index d0aaf45..2ebbfd9 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -1,7 +1,7 @@
/*
- * Backlight Driver for Sharp Corgi
+ * Backlight Driver for Sharp Zaurus Handhelds (various models)
*
- * Copyright (c) 2004-2005 Richard Purdie
+ * Copyright (c) 2004-2006 Richard Purdie
*
* Based on Sharp's 2.4 Backlight Driver
*
@@ -15,80 +15,63 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
-
#include <asm/arch/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
-#define CORGI_DEFAULT_INTENSITY 0x1f
-#define CORGI_LIMIT_MASK 0x0b
-
-static int corgibl_powermode = FB_BLANK_UNBLANK;
-static int current_intensity = 0;
-static int corgibl_limit = 0;
-static void (*corgibl_mach_set_intensity)(int intensity);
-static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+static int corgibl_intensity;
+static DEFINE_MUTEX(bl_mutex);
static struct backlight_properties corgibl_data;
+static struct backlight_device *corgi_backlight_device;
+static struct corgibl_machinfo *bl_machinfo;
-static void corgibl_send_intensity(int intensity)
+static unsigned long corgibl_flags;
+#define CORGIBL_SUSPENDED 0x01
+#define CORGIBL_BATTLOW 0x02
+
+static int corgibl_send_intensity(struct backlight_device *bd)
{
- unsigned long flags;
void (*corgi_kick_batt)(void);
+ int intensity = bd->props->brightness;
- if (corgibl_powermode != FB_BLANK_UNBLANK) {
+ if (bd->props->power != FB_BLANK_UNBLANK)
intensity = 0;
- } else {
- if (corgibl_limit)
- intensity &= CORGI_LIMIT_MASK;
- }
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_SUSPENDED)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_BATTLOW)
+ intensity &= bl_machinfo->limit_mask;
- spin_lock_irqsave(&bl_lock, flags);
+ mutex_lock(&bl_mutex);
+ bl_machinfo->set_bl_intensity(intensity);
+ mutex_unlock(&bl_mutex);
- corgibl_mach_set_intensity(intensity);
-
- spin_unlock_irqrestore(&bl_lock, flags);
+ corgibl_intensity = intensity;
corgi_kick_batt = symbol_get(sharpsl_battery_kick);
if (corgi_kick_batt) {
corgi_kick_batt();
symbol_put(sharpsl_battery_kick);
}
-}
-static void corgibl_blank(int blank)
-{
- switch(blank) {
-
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- if (corgibl_powermode == FB_BLANK_UNBLANK) {
- corgibl_send_intensity(0);
- corgibl_powermode = blank;
- }
- break;
- case FB_BLANK_UNBLANK:
- if (corgibl_powermode != FB_BLANK_UNBLANK) {
- corgibl_powermode = blank;
- corgibl_send_intensity(current_intensity);
- }
- break;
- }
+ return 0;
}
#ifdef CONFIG_PM
static int corgibl_suspend(struct platform_device *dev, pm_message_t state)
{
- corgibl_blank(FB_BLANK_POWERDOWN);
+ corgibl_flags |= CORGIBL_SUSPENDED;
+ corgibl_send_intensity(corgi_backlight_device);
return 0;
}
static int corgibl_resume(struct platform_device *dev)
{
- corgibl_blank(FB_BLANK_UNBLANK);
+ corgibl_flags &= ~CORGIBL_SUSPENDED;
+ corgibl_send_intensity(corgi_backlight_device);
return 0;
}
#else
@@ -96,30 +79,15 @@
#define corgibl_resume NULL
#endif
-
-static int corgibl_set_power(struct backlight_device *bd, int state)
-{
- corgibl_blank(state);
- return 0;
-}
-
-static int corgibl_get_power(struct backlight_device *bd)
-{
- return corgibl_powermode;
-}
-
-static int corgibl_set_intensity(struct backlight_device *bd, int intensity)
-{
- if (intensity > corgibl_data.max_brightness)
- intensity = corgibl_data.max_brightness;
- corgibl_send_intensity(intensity);
- current_intensity=intensity;
- return 0;
-}
-
static int corgibl_get_intensity(struct backlight_device *bd)
{
- return current_intensity;
+ return corgibl_intensity;
+}
+
+static int corgibl_set_intensity(struct backlight_device *bd)
+{
+ corgibl_send_intensity(corgi_backlight_device);
+ return 0;
}
/*
@@ -128,36 +96,38 @@
*/
void corgibl_limit_intensity(int limit)
{
- corgibl_limit = (limit ? 1 : 0);
- corgibl_send_intensity(current_intensity);
+ if (limit)
+ corgibl_flags |= CORGIBL_BATTLOW;
+ else
+ corgibl_flags &= ~CORGIBL_BATTLOW;
+ corgibl_send_intensity(corgi_backlight_device);
}
EXPORT_SYMBOL(corgibl_limit_intensity);
static struct backlight_properties corgibl_data = {
- .owner = THIS_MODULE,
- .get_power = corgibl_get_power,
- .set_power = corgibl_set_power,
+ .owner = THIS_MODULE,
.get_brightness = corgibl_get_intensity,
- .set_brightness = corgibl_set_intensity,
+ .update_status = corgibl_set_intensity,
};
-static struct backlight_device *corgi_backlight_device;
-
static int __init corgibl_probe(struct platform_device *pdev)
{
struct corgibl_machinfo *machinfo = pdev->dev.platform_data;
+ bl_machinfo = machinfo;
corgibl_data.max_brightness = machinfo->max_intensity;
- corgibl_mach_set_intensity = machinfo->set_bl_intensity;
+ if (!machinfo->limit_mask)
+ machinfo->limit_mask = -1;
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
- corgibl_set_intensity(NULL, CORGI_DEFAULT_INTENSITY);
- corgibl_limit_intensity(0);
+ corgibl_data.power = FB_BLANK_UNBLANK;
+ corgibl_data.brightness = machinfo->default_intensity;
+ corgibl_send_intensity(corgi_backlight_device);
printk("Corgi Backlight Driver Initialized.\n");
return 0;
@@ -167,8 +137,6 @@
{
backlight_device_unregister(corgi_backlight_device);
- corgibl_set_intensity(NULL, 0);
-
printk("Corgi Backlight Driver Unloaded\n");
return 0;
}
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 95da4c9..a71e984 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/backlight.h>
@@ -25,66 +25,58 @@
#define HP680_MAX_INTENSITY 255
#define HP680_DEFAULT_INTENSITY 10
-static int hp680bl_powermode = FB_BLANK_UNBLANK;
+static int hp680bl_suspended;
static int current_intensity = 0;
static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+static struct backlight_device *hp680_backlight_device;
-static void hp680bl_send_intensity(int intensity)
+static void hp680bl_send_intensity(struct backlight_device *bd)
{
unsigned long flags;
+ u16 v;
+ int intensity = bd->props->brightness;
- if (hp680bl_powermode != FB_BLANK_UNBLANK)
+ if (bd->props->power != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (hp680bl_suspended)
intensity = 0;
spin_lock_irqsave(&bl_lock, flags);
- sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
- spin_unlock_irqrestore(&bl_lock, flags);
-}
-
-static void hp680bl_blank(int blank)
-{
- u16 v;
-
- switch(blank) {
-
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- if (hp680bl_powermode == FB_BLANK_UNBLANK) {
- hp680bl_send_intensity(0);
- hp680bl_powermode = blank;
- sh_dac_disable(DAC_LCD_BRIGHTNESS);
- v = inw(HD64461_GPBDR);
- v |= HD64461_GPBDR_LCDOFF;
- outw(v, HD64461_GPBDR);
- }
- break;
- case FB_BLANK_UNBLANK:
- if (hp680bl_powermode != FB_BLANK_UNBLANK) {
- sh_dac_enable(DAC_LCD_BRIGHTNESS);
- v = inw(HD64461_GPBDR);
- v &= ~HD64461_GPBDR_LCDOFF;
- outw(v, HD64461_GPBDR);
- hp680bl_powermode = blank;
- hp680bl_send_intensity(current_intensity);
- }
- break;
+ if (intensity && current_intensity == 0) {
+ sh_dac_enable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v &= ~HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
+ } else if (intensity == 0 && current_intensity != 0) {
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
+ sh_dac_disable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v |= HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ } else if (intensity) {
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
}
+ spin_unlock_irqrestore(&bl_lock, flags);
+
+ current_intensity = intensity;
}
+
#ifdef CONFIG_PM
-static int hp680bl_suspend(struct device *dev, pm_message_t state, u32 level)
+static int hp680bl_suspend(struct platform_device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN)
- hp680bl_blank(FB_BLANK_POWERDOWN);
+ hp680bl_suspended = 1;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
-static int hp680bl_resume(struct device *dev, u32 level)
+static int hp680bl_resume(struct platform_device *dev)
{
- if (level == RESUME_POWER_ON)
- hp680bl_blank(FB_BLANK_UNBLANK);
+ hp680bl_suspended = 0;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
#else
@@ -92,24 +84,9 @@
#define hp680bl_resume NULL
#endif
-
-static int hp680bl_set_power(struct backlight_device *bd, int state)
+static int hp680bl_set_intensity(struct backlight_device *bd)
{
- hp680bl_blank(state);
- return 0;
-}
-
-static int hp680bl_get_power(struct backlight_device *bd)
-{
- return hp680bl_powermode;
-}
-
-static int hp680bl_set_intensity(struct backlight_device *bd, int intensity)
-{
- if (intensity > HP680_MAX_INTENSITY)
- intensity = HP680_MAX_INTENSITY;
- hp680bl_send_intensity(intensity);
- current_intensity = intensity;
+ hp680bl_send_intensity(bd);
return 0;
}
@@ -120,65 +97,67 @@
static struct backlight_properties hp680bl_data = {
.owner = THIS_MODULE,
- .get_power = hp680bl_get_power,
- .set_power = hp680bl_set_power,
.max_brightness = HP680_MAX_INTENSITY,
.get_brightness = hp680bl_get_intensity,
- .set_brightness = hp680bl_set_intensity,
+ .update_status = hp680bl_set_intensity,
};
-static struct backlight_device *hp680_backlight_device;
-
-static int __init hp680bl_probe(struct device *dev)
+static int __init hp680bl_probe(struct platform_device *dev)
{
hp680_backlight_device = backlight_device_register ("hp680-bl",
NULL, &hp680bl_data);
if (IS_ERR (hp680_backlight_device))
return PTR_ERR (hp680_backlight_device);
- hp680bl_set_intensity(NULL, HP680_DEFAULT_INTENSITY);
+ hp680_backlight_device->props->brightness = HP680_DEFAULT_INTENSITY;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
-static int hp680bl_remove(struct device *dev)
+static int hp680bl_remove(struct platform_device *dev)
{
backlight_device_unregister(hp680_backlight_device);
return 0;
}
-static struct device_driver hp680bl_driver = {
- .name = "hp680-bl",
- .bus = &platform_bus_type,
+static struct platform_driver hp680bl_driver = {
.probe = hp680bl_probe,
.remove = hp680bl_remove,
.suspend = hp680bl_suspend,
.resume = hp680bl_resume,
+ .driver = {
+ .name = "hp680-bl",
+ },
};
-static struct platform_device hp680bl_device = {
- .name = "hp680-bl",
- .id = -1,
-};
+static struct platform_device *hp680bl_device;
static int __init hp680bl_init(void)
{
int ret;
- ret=driver_register(&hp680bl_driver);
+ ret = platform_driver_register(&hp680bl_driver);
if (!ret) {
- ret = platform_device_register(&hp680bl_device);
- if (ret)
- driver_unregister(&hp680bl_driver);
+ hp680bl_device = platform_device_alloc("hp680-bl", -1);
+ if (!hp680bl_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(hp680bl_device);
+
+ if (ret) {
+ platform_device_put(hp680bl_device);
+ platform_driver_unregister(&hp680bl_driver);
+ }
}
return ret;
}
static void __exit hp680bl_exit(void)
{
- platform_device_unregister(&hp680bl_device);
- driver_unregister(&hp680bl_driver);
+ platform_device_unregister(hp680bl_device);
+ platform_driver_unregister(&hp680bl_driver);
}
module_init(hp680bl_init);
diff --git a/drivers/video/cfbimgblt.c b/drivers/video/cfbimgblt.c
index 910e233..8ba6152 100644
--- a/drivers/video/cfbimgblt.c
+++ b/drivers/video/cfbimgblt.c
@@ -169,7 +169,7 @@
while (j--) {
l--;
- color = (*s & 1 << (FB_BIT_NR(l))) ? fgcolor : bgcolor;
+ color = (*s & (1 << l)) ? fgcolor : bgcolor;
val |= FB_SHIFT_HIGH(color, shift);
/* Did the bitshift spill bits to the next long? */
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 66d6f2f..1103010 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -60,8 +60,8 @@
#include <asm/amigahw.h>
#endif
#ifdef CONFIG_PPC_PREP
-#include <asm/processor.h>
-#define isPReP (_machine == _MACH_prep)
+#include <asm/machdep.h>
+#define isPReP (machine_is(prep))
#else
#define isPReP 0
#endif
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 041d069..ca020719 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -466,7 +466,7 @@
int i, j;
if (!this_opt || !*this_opt)
- return 0;
+ return 1;
while ((options = strsep(&this_opt, ",")) != NULL) {
if (!strncmp(options, "font:", 5))
@@ -481,10 +481,10 @@
options++;
}
if (*options != ',')
- return 0;
+ return 1;
options++;
} else
- return 0;
+ return 1;
}
if (!strncmp(options, "map:", 4)) {
@@ -496,7 +496,7 @@
con2fb_map_boot[i] =
(options[j++]-'0') % FB_MAX;
}
- return 0;
+ return 1;
}
if (!strncmp(options, "vc:", 3)) {
@@ -518,7 +518,7 @@
rotate = 0;
}
}
- return 0;
+ return 1;
}
__setup("fbcon=", fb_console_setup);
@@ -1142,6 +1142,7 @@
set_blitting_type(vc, info);
}
+ ops->p = &fb_display[fg_console];
}
static void fbcon_deinit(struct vc_data *vc)
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index 0339f56..74ac2ac 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -275,7 +275,7 @@
if (str)
strlcpy (default_sti_path, str, sizeof (default_sti_path));
- return 0;
+ return 1;
}
/* Assuming the machine has multiple STI consoles (=graphic cards) which
@@ -321,7 +321,7 @@
i++;
}
- return 0;
+ return 1;
}
/* The optional linux kernel parameter "sti_font" defines which font
@@ -373,7 +373,7 @@
glob_cfg->save_addr));
/* dump extended cfg */
- cfg = PTR_STI(glob_cfg->ext_ptr);
+ cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
DPRINTK(( KERN_INFO
"monitor %d\n"
"in friendly mode: %d\n"
@@ -453,25 +453,11 @@
sti->regions_phys[i] =
REGION_OFFSET_TO_PHYS(sti->regions[i], newhpa);
- /* remap virtually */
- /* FIXME: add BTLB support if btlb==1 */
len = sti->regions[i].region_desc.length * 4096;
-
-/* XXX: Enabling IOREMAP debugging causes a crash, so we must be passing
- * a virtual address to something expecting a physical address that doesn't
- * go through a readX macro */
-#if 0
- if (len)
- glob_cfg->region_ptrs[i] = (unsigned long) (
- sti->regions[i].region_desc.cache ?
- ioremap(sti->regions_phys[i], len) :
- ioremap_nocache(sti->regions_phys[i], len) );
-#else
if (len)
glob_cfg->region_ptrs[i] = sti->regions_phys[i];
-#endif
- DPRINTK(("region #%d: phys %08lx, virt %08x, len=%lukB, "
+ DPRINTK(("region #%d: phys %08lx, region_ptr %08x, len=%lukB, "
"btlb=%d, sysonly=%d, cache=%d, last=%d\n",
i, sti->regions_phys[i], glob_cfg->region_ptrs[i],
len/1024,
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index b1a8dca..944855b 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1588,7 +1588,7 @@
}
}
- return 0;
+ return 1;
}
__setup("video=", video_setup);
#endif
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 951c997..23c1827 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -115,6 +115,7 @@
#include <asm/uaccess.h>
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
unsigned char nvram_read_byte(int);
static int default_vmode = VMODE_NVRAM;
static int default_cmode = CMODE_NVRAM;
@@ -1833,7 +1834,7 @@
/* FIXME: Where to move this?! */
#if defined(CONFIG_PPC_PMAC)
#ifndef MODULE
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
struct fb_var_screeninfo var;
if (default_vmode <= 0 || default_vmode > VMODE_MAX)
default_vmode = VMODE_640_480_60;
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index 6d3e489..093ab99 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -30,6 +30,7 @@
#include <asm/pci-bridge.h>
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/machdep.h>
#include <asm/backlight.h>
#endif
@@ -1355,7 +1356,7 @@
NVWriteCrtc(par, 0x1a, vesa);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && _machine == _MACH_Pmac) {
+ if (par->FlatPanel && machine_is(powermac)) {
set_backlight_enable(!blank);
}
#endif
@@ -1741,7 +1742,7 @@
info->fix.id,
par->FbMapSize / (1024 * 1024), info->fix.smem_start);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && _machine == _MACH_Pmac)
+ if (par->FlatPanel && machine_is(powermac))
register_backlight_controller(&nvidia_backlight_controller,
par, "mnca");
#endif
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 53ad61f..809fc5e 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -232,9 +232,9 @@
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
+ return -EINVAL;
if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
+ return -EINVAL;
var->xres_virtual =
max(var->xres_virtual, var->xres);
var->yres_virtual =
@@ -781,7 +781,7 @@
LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
- schedule_timeout(20 * HZ / 1000);
+ schedule_timeout(200 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
/* disable LCD controller clock */
@@ -1274,7 +1274,7 @@
struct pxafb_mach_info *inf;
int ret;
- dev_dbg(dev, "pxafb_probe\n");
+ dev_dbg(&dev->dev, "pxafb_probe\n");
inf = dev->dev.platform_data;
ret = -ENOMEM;
diff --git a/drivers/video/radeonfb.c b/drivers/video/radeonfb.c
deleted file mode 100644
index 24982ad..0000000
--- a/drivers/video/radeonfb.c
+++ /dev/null
@@ -1,3167 +0,0 @@
-/*
- * drivers/video/radeonfb.c
- * framebuffer driver for ATI Radeon chipset video boards
- *
- * Copyright 2000 Ani Joshi <ajoshi@kernel.crashing.org>
- *
- *
- * ChangeLog:
- * 2000-08-03 initial version 0.0.1
- * 2000-09-10 more bug fixes, public release 0.0.5
- * 2001-02-19 mode bug fixes, 0.0.7
- * 2001-07-05 fixed scrolling issues, engine initialization,
- * and minor mode tweaking, 0.0.9
- * 2001-09-07 Radeon VE support, Nick Kurshev
- * blanking, pan_display, and cmap fixes, 0.1.0
- * 2001-10-10 Radeon 7500 and 8500 support, and experimental
- * flat panel support, 0.1.1
- * 2001-11-17 Radeon M6 (ppc) support, Daniel Berlin, 0.1.2
- * 2001-11-18 DFP fixes, Kevin Hendricks, 0.1.3
- * 2001-11-29 more cmap, backlight fixes, Benjamin Herrenschmidt
- * 2002-01-18 DFP panel detection via BIOS, Michael Clark, 0.1.4
- * 2002-06-02 console switching, mode set fixes, accel fixes
- * 2002-06-03 MTRR support, Peter Horton, 0.1.5
- * 2002-09-21 rv250, r300, m9 initial support,
- * added mirror option, 0.1.6
- *
- * Special thanks to ATI DevRel team for their hardware donations.
- *
- */
-
-
-#define RADEON_VERSION "0.1.6"
-
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#if defined(__powerpc__)
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include "macmodes.h"
-
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-#include <asm/backlight.h>
-#endif
-
-#ifdef CONFIG_BOOTX_TEXT
-#include <asm/btext.h>
-#endif
-
-#ifdef CONFIG_ADB_PMU
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#endif
-
-#endif /* __powerpc__ */
-
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
-
-#include <video/radeon.h>
-#include <linux/radeonfb.h>
-
-#define DEBUG 0
-
-#if DEBUG
-#define RTRACE printk
-#else
-#define RTRACE if(0) printk
-#endif
-
-// XXX
-#undef CONFIG_PMAC_PBOOK
-
-
-enum radeon_chips {
- RADEON_QD,
- RADEON_QE,
- RADEON_QF,
- RADEON_QG,
- RADEON_QY,
- RADEON_QZ,
- RADEON_LW,
- RADEON_LX,
- RADEON_LY,
- RADEON_LZ,
- RADEON_QL,
- RADEON_QN,
- RADEON_QO,
- RADEON_Ql,
- RADEON_BB,
- RADEON_QW,
- RADEON_QX,
- RADEON_Id,
- RADEON_Ie,
- RADEON_If,
- RADEON_Ig,
- RADEON_Ya,
- RADEON_Yd,
- RADEON_Ld,
- RADEON_Le,
- RADEON_Lf,
- RADEON_Lg,
- RADEON_ND,
- RADEON_NE,
- RADEON_NF,
- RADEON_NG,
- RADEON_QM
-};
-
-enum radeon_arch {
- RADEON_R100,
- RADEON_RV100,
- RADEON_R200,
- RADEON_RV200,
- RADEON_RV250,
- RADEON_R300,
- RADEON_M6,
- RADEON_M7,
- RADEON_M9
-};
-
-static struct radeon_chip_info {
- const char *name;
- unsigned char arch;
-} radeon_chip_info[] __devinitdata = {
- { "QD", RADEON_R100 },
- { "QE", RADEON_R100 },
- { "QF", RADEON_R100 },
- { "QG", RADEON_R100 },
- { "VE QY", RADEON_RV100 },
- { "VE QZ", RADEON_RV100 },
- { "M7 LW", RADEON_M7 },
- { "M7 LX", RADEON_M7 },
- { "M6 LY", RADEON_M6 },
- { "M6 LZ", RADEON_M6 },
- { "8500 QL", RADEON_R200 },
- { "8500 QN", RADEON_R200 },
- { "8500 QO", RADEON_R200 },
- { "8500 Ql", RADEON_R200 },
- { "8500 BB", RADEON_R200 },
- { "7500 QW", RADEON_RV200 },
- { "7500 QX", RADEON_RV200 },
- { "9000 Id", RADEON_RV250 },
- { "9000 Ie", RADEON_RV250 },
- { "9000 If", RADEON_RV250 },
- { "9000 Ig", RADEON_RV250 },
- { "M9 Ld", RADEON_M9 },
- { "M9 Le", RADEON_M9 },
- { "M9 Lf", RADEON_M9 },
- { "M9 Lg", RADEON_M9 },
- { "9700 ND", RADEON_R300 },
- { "9700 NE", RADEON_R300 },
- { "9700 NF", RADEON_R300 },
- { "9700 NG", RADEON_R300 },
- { "9100 QM", RADEON_R200 }
-};
-
-
-enum radeon_montype
-{
- MT_NONE,
- MT_CRT, /* CRT */
- MT_LCD, /* LCD */
- MT_DFP, /* DVI */
- MT_CTV, /* composite TV */
- MT_STV /* S-Video out */
-};
-
-
-static struct pci_device_id radeonfb_pci_table[] = {
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QD},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QE},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QF},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QG},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QY},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QZ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QZ},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LW, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LW},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LX},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LY, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LY},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LZ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LZ},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QL},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QN, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QN},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QO},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ql, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ql},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_BB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_BB},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QW, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QW},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QX},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Id},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ie, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ie},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_If, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_If},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ig, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ig},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ya, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ya},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Yd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Yd},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ld, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ld},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Le, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Le},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Lf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Lf},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Lg, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Lg},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_ND, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_ND},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NE},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NF},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NG},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QM},
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, radeonfb_pci_table);
-
-
-typedef struct {
- u16 reg;
- u32 val;
-} reg_val;
-
-
-/* these common regs are cleared before mode setting so they do not
- * interfere with anything
- */
-static reg_val common_regs[] = {
- { OVR_CLR, 0 },
- { OVR_WID_LEFT_RIGHT, 0 },
- { OVR_WID_TOP_BOTTOM, 0 },
- { OV0_SCALE_CNTL, 0 },
- { SUBPIC_CNTL, 0 },
- { VIPH_CONTROL, 0 },
- { I2C_CNTL_1, 0 },
- { GEN_INT_CNTL, 0 },
- { CAP0_TRIG_CNTL, 0 },
-};
-
-static reg_val common_regs_m6[] = {
- { OVR_CLR, 0 },
- { OVR_WID_LEFT_RIGHT, 0 },
- { OVR_WID_TOP_BOTTOM, 0 },
- { OV0_SCALE_CNTL, 0 },
- { SUBPIC_CNTL, 0 },
- { GEN_INT_CNTL, 0 },
- { CAP0_TRIG_CNTL, 0 }
-};
-
-typedef struct {
- u8 clock_chip_type;
- u8 struct_size;
- u8 accelerator_entry;
- u8 VGA_entry;
- u16 VGA_table_offset;
- u16 POST_table_offset;
- u16 XCLK;
- u16 MCLK;
- u8 num_PLL_blocks;
- u8 size_PLL_blocks;
- u16 PCLK_ref_freq;
- u16 PCLK_ref_divider;
- u32 PCLK_min_freq;
- u32 PCLK_max_freq;
- u16 MCLK_ref_freq;
- u16 MCLK_ref_divider;
- u32 MCLK_min_freq;
- u32 MCLK_max_freq;
- u16 XCLK_ref_freq;
- u16 XCLK_ref_divider;
- u32 XCLK_min_freq;
- u32 XCLK_max_freq;
-} __attribute__ ((packed)) PLL_BLOCK;
-
-
-struct pll_info {
- int ppll_max;
- int ppll_min;
- int xclk;
- int ref_div;
- int ref_clk;
-};
-
-
-struct ram_info {
- int ml;
- int mb;
- int trcd;
- int trp;
- int twr;
- int cl;
- int tr2w;
- int loop_latency;
- int rloop;
-};
-
-
-struct radeon_regs {
- /* CRTC regs */
- u32 crtc_h_total_disp;
- u32 crtc_h_sync_strt_wid;
- u32 crtc_v_total_disp;
- u32 crtc_v_sync_strt_wid;
- u32 crtc_pitch;
- u32 crtc_gen_cntl;
- u32 crtc_ext_cntl;
- u32 dac_cntl;
-
- u32 flags;
- u32 pix_clock;
- int xres, yres;
-
- /* DDA regs */
- u32 dda_config;
- u32 dda_on_off;
-
- /* PLL regs */
- u32 ppll_div_3;
- u32 ppll_ref_div;
- u32 vclk_ecp_cntl;
-
- /* Flat panel regs */
- u32 fp_crtc_h_total_disp;
- u32 fp_crtc_v_total_disp;
- u32 fp_gen_cntl;
- u32 fp_h_sync_strt_wid;
- u32 fp_horz_stretch;
- u32 fp_panel_cntl;
- u32 fp_v_sync_strt_wid;
- u32 fp_vert_stretch;
- u32 lvds_gen_cntl;
- u32 lvds_pll_cntl;
- u32 tmds_crc;
- u32 tmds_transmitter_cntl;
-
-#if defined(__BIG_ENDIAN)
- u32 surface_cntl;
-#endif
-};
-
-
-struct radeonfb_info {
- struct fb_info info;
-
- struct radeon_regs state;
- struct radeon_regs init_state;
-
- char name[32];
- char ram_type[12];
-
- unsigned long mmio_base_phys;
- unsigned long fb_base_phys;
-
- void __iomem *mmio_base;
- void __iomem *fb_base;
-
- struct pci_dev *pdev;
-
- unsigned char *EDID;
- unsigned char __iomem *bios_seg;
-
- u32 pseudo_palette[17];
- struct { u8 red, green, blue, pad; } palette[256];
-
- int chipset;
- unsigned char arch;
- int video_ram;
- u8 rev;
- int pitch, bpp, depth;
- int xres, yres, pixclock;
- int xres_virtual, yres_virtual;
- u32 accel_flags;
-
- int use_default_var;
- int got_dfpinfo;
-
- int hasCRTC2;
- int crtDisp_type;
- int dviDisp_type;
-
- int panel_xres, panel_yres;
- int clock;
- int hOver_plus, hSync_width, hblank;
- int vOver_plus, vSync_width, vblank;
- int hAct_high, vAct_high, interlaced;
- int synct, misc;
-
- u32 dp_gui_master_cntl;
-
- struct pll_info pll;
- int pll_output_freq, post_div, fb_div;
-
- struct ram_info ram;
-
- int mtrr_hdl;
-
-#ifdef CONFIG_PMAC_PBOOK
- int pm_reg;
- u32 save_regs[64];
- u32 mdll, mdll2;
-#endif /* CONFIG_PMAC_PBOOK */
- int asleep;
-
- struct radeonfb_info *next;
-};
-
-
-static struct fb_var_screeninfo radeonfb_default_var = {
- 640, 480, 640, 480, 0, 0, 8, 0,
- {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0, 39721, 40, 24, 32, 11, 96, 2,
- 0, FB_VMODE_NONINTERLACED
-};
-
-/*
- * IO macros
- */
-
-#define INREG8(addr) readb((rinfo->mmio_base)+addr)
-#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
-#define INREG(addr) readl((rinfo->mmio_base)+addr)
-#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)
-
-#define OUTPLL(addr,val) \
- do { \
- OUTREG8(CLOCK_CNTL_INDEX, (addr & 0x0000003f) | 0x00000080); \
- OUTREG(CLOCK_CNTL_DATA, val); \
- } while(0)
-
-#define OUTPLLP(addr,val,mask) \
- do { \
- unsigned int _tmp = INPLL(addr); \
- _tmp &= (mask); \
- _tmp |= (val); \
- OUTPLL(addr, _tmp); \
- } while (0)
-
-#define OUTREGP(addr,val,mask) \
- do { \
- unsigned int _tmp = INREG(addr); \
- _tmp &= (mask); \
- _tmp |= (val); \
- OUTREG(addr, _tmp); \
- } while (0)
-
-
-static __inline__ u32 _INPLL(struct radeonfb_info *rinfo, u32 addr)
-{
- OUTREG8(CLOCK_CNTL_INDEX, addr & 0x0000003f);
- return (INREG(CLOCK_CNTL_DATA));
-}
-
-#define INPLL(addr) _INPLL(rinfo, addr)
-
-#define PRIMARY_MONITOR(rinfo) ((rinfo->dviDisp_type != MT_NONE) && \
- (rinfo->dviDisp_type != MT_STV) && \
- (rinfo->dviDisp_type != MT_CTV) ? \
- rinfo->dviDisp_type : rinfo->crtDisp_type)
-
-static char *GET_MON_NAME(int type)
-{
- char *pret = NULL;
-
- switch (type) {
- case MT_NONE:
- pret = "no";
- break;
- case MT_CRT:
- pret = "CRT";
- break;
- case MT_DFP:
- pret = "DFP";
- break;
- case MT_LCD:
- pret = "LCD";
- break;
- case MT_CTV:
- pret = "CTV";
- break;
- case MT_STV:
- pret = "STV";
- break;
- }
-
- return pret;
-}
-
-
-/*
- * 2D engine routines
- */
-
-static __inline__ void radeon_engine_flush (struct radeonfb_info *rinfo)
-{
- int i;
-
- /* initiate flush */
- OUTREGP(RB2D_DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
- ~RB2D_DC_FLUSH_ALL);
-
- for (i=0; i < 2000000; i++) {
- if (!(INREG(RB2D_DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))
- break;
- }
-}
-
-
-static __inline__ void _radeon_fifo_wait (struct radeonfb_info *rinfo, int entries)
-{
- int i;
-
- for (i=0; i<2000000; i++)
- if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
- return;
-}
-
-
-static __inline__ void _radeon_engine_idle (struct radeonfb_info *rinfo)
-{
- int i;
-
- /* ensure FIFO is empty before waiting for idle */
- _radeon_fifo_wait (rinfo, 64);
-
- for (i=0; i<2000000; i++) {
- if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
- radeon_engine_flush (rinfo);
- return;
- }
- }
-}
-
-
-#define radeon_engine_idle() _radeon_engine_idle(rinfo)
-#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
-
-
-
-/*
- * helper routines
- */
-
-static __inline__ u32 radeon_get_dstbpp(u16 depth)
-{
- switch (depth) {
- case 8:
- return DST_8BPP;
- case 15:
- return DST_15BPP;
- case 16:
- return DST_16BPP;
- case 32:
- return DST_32BPP;
- default:
- return 0;
- }
-}
-
-
-static inline int var_to_depth(const struct fb_var_screeninfo *var)
-{
- if (var->bits_per_pixel != 16)
- return var->bits_per_pixel;
- return (var->green.length == 6) ? 16 : 15;
-}
-
-
-static void _radeon_engine_reset(struct radeonfb_info *rinfo)
-{
- u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset;
-
- radeon_engine_flush (rinfo);
-
- clock_cntl_index = INREG(CLOCK_CNTL_INDEX);
- mclk_cntl = INPLL(MCLK_CNTL);
-
- OUTPLL(MCLK_CNTL, (mclk_cntl |
- FORCEON_MCLKA |
- FORCEON_MCLKB |
- FORCEON_YCLKA |
- FORCEON_YCLKB |
- FORCEON_MC |
- FORCEON_AIC));
- rbbm_soft_reset = INREG(RBBM_SOFT_RESET);
-
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset |
- SOFT_RESET_CP |
- SOFT_RESET_HI |
- SOFT_RESET_SE |
- SOFT_RESET_RE |
- SOFT_RESET_PP |
- SOFT_RESET_E2 |
- SOFT_RESET_RB);
- INREG(RBBM_SOFT_RESET);
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset & (u32)
- ~(SOFT_RESET_CP |
- SOFT_RESET_HI |
- SOFT_RESET_SE |
- SOFT_RESET_RE |
- SOFT_RESET_PP |
- SOFT_RESET_E2 |
- SOFT_RESET_RB));
- INREG(RBBM_SOFT_RESET);
-
- OUTPLL(MCLK_CNTL, mclk_cntl);
- OUTREG(CLOCK_CNTL_INDEX, clock_cntl_index);
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset);
-
- return;
-}
-
-#define radeon_engine_reset() _radeon_engine_reset(rinfo)
-
-
-static __inline__ int round_div(int num, int den)
-{
- return (num + (den / 2)) / den;
-}
-
-
-
-static __inline__ int min_bits_req(int val)
-{
- int bits_req = 0;
-
- if (val == 0)
- bits_req = 1;
-
- while (val) {
- val >>= 1;
- bits_req++;
- }
-
- return (bits_req);
-}
-
-
-static __inline__ int _max(int val1, int val2)
-{
- if (val1 >= val2)
- return val1;
- else
- return val2;
-}
-
-
-
-/*
- * globals
- */
-
-#ifndef MODULE
-static char *mode_option;
-#endif
-
-static char noaccel = 0;
-static char mirror = 0;
-static int panel_yres = 0;
-static char force_dfp = 0;
-static struct radeonfb_info *board_list = NULL;
-static char nomtrr = 0;
-
-/*
- * prototypes
- */
-
-static void radeon_save_state (struct radeonfb_info *rinfo,
- struct radeon_regs *save);
-static void radeon_engine_init (struct radeonfb_info *rinfo);
-static void radeon_write_mode (struct radeonfb_info *rinfo,
- struct radeon_regs *mode);
-static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo);
-static int __devinit radeon_init_disp (struct radeonfb_info *rinfo);
-static int radeon_init_disp_var (struct radeonfb_info *rinfo, struct fb_var_screeninfo *var);
-static void __iomem *radeon_find_rom(struct radeonfb_info *rinfo);
-static void radeon_get_pllinfo(struct radeonfb_info *rinfo, void __iomem *bios_seg);
-static void radeon_get_moninfo (struct radeonfb_info *rinfo);
-static int radeon_get_dfpinfo (struct radeonfb_info *rinfo);
-static int radeon_get_dfpinfo_BIOS(struct radeonfb_info *rinfo);
-static void radeon_get_EDID(struct radeonfb_info *rinfo);
-static int radeon_dfp_parse_EDID(struct radeonfb_info *rinfo);
-static void radeon_update_default_var(struct radeonfb_info *rinfo);
-
-#ifdef CONFIG_PPC_OF
-
-static int radeon_read_OF (struct radeonfb_info *rinfo);
-static int radeon_get_EDID_OF(struct radeonfb_info *rinfo);
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
-
-#ifdef CONFIG_PMAC_PBOOK
-int radeon_sleep_notify(struct pmu_sleep_notifier *self, int when);
-static struct pmu_sleep_notifier radeon_sleep_notifier = {
- radeon_sleep_notify, SLEEP_LEVEL_VIDEO,
-};
-#endif /* CONFIG_PMAC_PBOOK */
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int radeon_set_backlight_enable(int on, int level, void *data);
-static int radeon_set_backlight_level(int level, void *data);
-static struct backlight_controller radeon_backlight_controller = {
- radeon_set_backlight_enable,
- radeon_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-#endif /* CONFIG_PPC_OF */
-
-
-static void __iomem *radeon_find_rom(struct radeonfb_info *rinfo)
-{
-#if defined(__i386__)
- u32 segstart;
- char __iomem *rom_base;
- char __iomem *rom;
- int stage;
- int i,j;
- char aty_rom_sig[] = "761295520";
- char *radeon_sig[] = {
- "RG6",
- "RADEON"
- };
-
- for(segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
-
- stage = 1;
-
- rom_base = ioremap(segstart, 0x1000);
-
- if ((*rom_base == 0x55) && (((*(rom_base + 1)) & 0xff) == 0xaa))
- stage = 2;
-
-
- if (stage != 2) {
- iounmap(rom_base);
- continue;
- }
-
- rom = rom_base;
-
- for (i = 0; (i < 128 - strlen(aty_rom_sig)) && (stage != 3); i++) {
- if (aty_rom_sig[0] == *rom)
- if (strncmp(aty_rom_sig, rom,
- strlen(aty_rom_sig)) == 0)
- stage = 3;
- rom++;
- }
- if (stage != 3) {
- iounmap(rom_base);
- continue;
- }
- rom = rom_base;
-
- for (i = 0; (i < 512) && (stage != 4); i++) {
- for (j = 0; j < ARRAY_SIZE(radeon_sig); j++) {
- if (radeon_sig[j][0] == *rom)
- if (strncmp(radeon_sig[j], rom,
- strlen(radeon_sig[j])) == 0) {
- stage = 4;
- break;
- }
- }
- rom++;
- }
- if (stage != 4) {
- iounmap(rom_base);
- continue;
- }
-
- return rom_base;
- }
-#endif
- return NULL;
-}
-
-
-
-
-static void radeon_get_pllinfo(struct radeonfb_info *rinfo, void __iomem *bios_seg)
-{
- void __iomem *bios_header;
- void __iomem *header_ptr;
- u16 bios_header_offset, pll_info_offset;
- PLL_BLOCK pll;
-
- if (bios_seg) {
- bios_header = bios_seg + 0x48L;
- header_ptr = bios_header;
-
- bios_header_offset = readw(header_ptr);
- bios_header = bios_seg + bios_header_offset;
- bios_header += 0x30;
-
- header_ptr = bios_header;
- pll_info_offset = readw(header_ptr);
- header_ptr = bios_seg + pll_info_offset;
-
- memcpy_fromio(&pll, header_ptr, 50);
-
- rinfo->pll.xclk = (u32)pll.XCLK;
- rinfo->pll.ref_clk = (u32)pll.PCLK_ref_freq;
- rinfo->pll.ref_div = (u32)pll.PCLK_ref_divider;
- rinfo->pll.ppll_min = pll.PCLK_min_freq;
- rinfo->pll.ppll_max = pll.PCLK_max_freq;
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d from BIOS\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
- } else {
-#ifdef CONFIG_PPC_OF
- if (radeon_read_OF(rinfo)) {
- unsigned int tmp, Nx, M, ref_div, xclk;
-
- tmp = INPLL(M_SPLL_REF_FB_DIV);
- ref_div = INPLL(PPLL_REF_DIV) & 0x3ff;
-
- Nx = (tmp & 0xff00) >> 8;
- M = (tmp & 0xff);
- xclk = ((((2 * Nx * rinfo->pll.ref_clk) + (M)) /
- (2 * M)));
-
- rinfo->pll.xclk = xclk;
- rinfo->pll.ref_div = ref_div;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.ppll_max = 35000;
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d from OF\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
-
- return;
- }
-#endif
- /* no BIOS or BIOS not found, use defaults */
- switch (rinfo->chipset) {
- case PCI_DEVICE_ID_ATI_RADEON_QW:
- case PCI_DEVICE_ID_ATI_RADEON_QX:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 23000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_QL:
- case PCI_DEVICE_ID_ATI_RADEON_QN:
- case PCI_DEVICE_ID_ATI_RADEON_QO:
- case PCI_DEVICE_ID_ATI_RADEON_Ql:
- case PCI_DEVICE_ID_ATI_RADEON_BB:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 27500;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_Id:
- case PCI_DEVICE_ID_ATI_RADEON_Ie:
- case PCI_DEVICE_ID_ATI_RADEON_If:
- case PCI_DEVICE_ID_ATI_RADEON_Ig:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 25000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_ND:
- case PCI_DEVICE_ID_ATI_RADEON_NE:
- case PCI_DEVICE_ID_ATI_RADEON_NF:
- case PCI_DEVICE_ID_ATI_RADEON_NG:
- rinfo->pll.ppll_max = 40000;
- rinfo->pll.ppll_min = 20000;
- rinfo->pll.xclk = 27000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_QD:
- case PCI_DEVICE_ID_ATI_RADEON_QE:
- case PCI_DEVICE_ID_ATI_RADEON_QF:
- case PCI_DEVICE_ID_ATI_RADEON_QG:
- default:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 16600;
- rinfo->pll.ref_div = 67;
- rinfo->pll.ref_clk = 2700;
- break;
- }
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d defaults\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
- }
-}
-
-
-static void radeon_get_moninfo (struct radeonfb_info *rinfo)
-{
- unsigned int tmp;
-
- if (force_dfp) {
- rinfo->dviDisp_type = MT_DFP;
- return;
- }
-
- tmp = INREG(BIOS_4_SCRATCH);
- printk(KERN_DEBUG "radeon_get_moninfo: bios 4 scratch = %x\n", tmp);
-
- if (rinfo->hasCRTC2) {
- /* primary DVI port */
- if (tmp & 0x08)
- rinfo->dviDisp_type = MT_DFP;
- else if (tmp & 0x4)
- rinfo->dviDisp_type = MT_LCD;
- else if (tmp & 0x200)
- rinfo->dviDisp_type = MT_CRT;
- else if (tmp & 0x10)
- rinfo->dviDisp_type = MT_CTV;
- else if (tmp & 0x20)
- rinfo->dviDisp_type = MT_STV;
-
- /* secondary CRT port */
- if (tmp & 0x2)
- rinfo->crtDisp_type = MT_CRT;
- else if (tmp & 0x800)
- rinfo->crtDisp_type = MT_DFP;
- else if (tmp & 0x400)
- rinfo->crtDisp_type = MT_LCD;
- else if (tmp & 0x1000)
- rinfo->crtDisp_type = MT_CTV;
- else if (tmp & 0x2000)
- rinfo->crtDisp_type = MT_STV;
- } else {
- rinfo->dviDisp_type = MT_NONE;
-
- tmp = INREG(FP_GEN_CNTL);
-
- if (tmp & FP_EN_TMDS)
- rinfo->crtDisp_type = MT_DFP;
- else
- rinfo->crtDisp_type = MT_CRT;
- }
-}
-
-
-
-static void radeon_get_EDID(struct radeonfb_info *rinfo)
-{
-#ifdef CONFIG_PPC_OF
- if (!radeon_get_EDID_OF(rinfo))
- RTRACE("radeonfb: could not retrieve EDID from OF\n");
-#else
- /* XXX use other methods later */
-#endif
-}
-
-
-#ifdef CONFIG_PPC_OF
-static int radeon_get_EDID_OF(struct radeonfb_info *rinfo)
-{
- struct device_node *dp;
- unsigned char *pedid = NULL;
- static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID", "EDID1", NULL };
- int i;
-
- dp = pci_device_to_OF_node(rinfo->pdev);
- while (dp != NULL) {
- for (i = 0; propnames[i] != NULL; ++i) {
- pedid = (unsigned char *)
- get_property(dp, propnames[i], NULL);
- if (pedid != NULL) {
- rinfo->EDID = pedid;
- return 1;
- }
- }
- dp = dp->child;
- }
- return 0;
-}
-#endif /* CONFIG_PPC_OF */
-
-
-static int radeon_dfp_parse_EDID(struct radeonfb_info *rinfo)
-{
- unsigned char *block = rinfo->EDID;
-
- if (!block)
- return 0;
-
- /* jump to the detailed timing block section */
- block += 54;
-
- rinfo->clock = (block[0] + (block[1] << 8));
- rinfo->panel_xres = (block[2] + ((block[4] & 0xf0) << 4));
- rinfo->hblank = (block[3] + ((block[4] & 0x0f) << 8));
- rinfo->panel_yres = (block[5] + ((block[7] & 0xf0) << 4));
- rinfo->vblank = (block[6] + ((block[7] & 0x0f) << 8));
- rinfo->hOver_plus = (block[8] + ((block[11] & 0xc0) << 2));
- rinfo->hSync_width = (block[9] + ((block[11] & 0x30) << 4));
- rinfo->vOver_plus = ((block[10] >> 4) + ((block[11] & 0x0c) << 2));
- rinfo->vSync_width = ((block[10] & 0x0f) + ((block[11] & 0x03) << 4));
- rinfo->interlaced = ((block[17] & 0x80) >> 7);
- rinfo->synct = ((block[17] & 0x18) >> 3);
- rinfo->misc = ((block[17] & 0x06) >> 1);
- rinfo->hAct_high = rinfo->vAct_high = 0;
- if (rinfo->synct == 3) {
- if (rinfo->misc & 2)
- rinfo->hAct_high = 1;
- if (rinfo->misc & 1)
- rinfo->vAct_high = 1;
- }
-
- printk("radeonfb: detected DFP panel size from EDID: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- rinfo->got_dfpinfo = 1;
-
- return 1;
-}
-
-
-static void radeon_update_default_var(struct radeonfb_info *rinfo)
-{
- struct fb_var_screeninfo *var = &radeonfb_default_var;
-
- var->xres = rinfo->panel_xres;
- var->yres = rinfo->panel_yres;
- var->xres_virtual = rinfo->panel_xres;
- var->yres_virtual = rinfo->panel_yres;
- var->xoffset = var->yoffset = 0;
- var->bits_per_pixel = 8;
- var->pixclock = 100000000 / rinfo->clock;
- var->left_margin = (rinfo->hblank - rinfo->hOver_plus - rinfo->hSync_width);
- var->right_margin = rinfo->hOver_plus;
- var->upper_margin = (rinfo->vblank - rinfo->vOver_plus - rinfo->vSync_width);
- var->lower_margin = rinfo->vOver_plus;
- var->hsync_len = rinfo->hSync_width;
- var->vsync_len = rinfo->vSync_width;
- var->sync = 0;
- if (rinfo->synct == 3) {
- if (rinfo->hAct_high)
- var->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (rinfo->vAct_high)
- var->sync |= FB_SYNC_VERT_HIGH_ACT;
- }
-
- var->vmode = 0;
- if (rinfo->interlaced)
- var->vmode |= FB_VMODE_INTERLACED;
-
- rinfo->use_default_var = 1;
-}
-
-
-static int radeon_get_dfpinfo_BIOS(struct radeonfb_info *rinfo)
-{
- char __iomem *fpbiosstart, *tmp, *tmp0;
- char stmp[30];
- int i;
-
- if (!rinfo->bios_seg)
- return 0;
-
- if (!(fpbiosstart = rinfo->bios_seg + readw(rinfo->bios_seg + 0x48))) {
- printk("radeonfb: Failed to detect DFP panel info using BIOS\n");
- return 0;
- }
-
- if (!(tmp = rinfo->bios_seg + readw(fpbiosstart + 0x40))) {
- printk("radeonfb: Failed to detect DFP panel info using BIOS\n");
- return 0;
- }
-
- for(i=0; i<24; i++)
- stmp[i] = readb(tmp+i+1);
- stmp[24] = 0;
- printk("radeonfb: panel ID string: %s\n", stmp);
- rinfo->panel_xres = readw(tmp + 25);
- rinfo->panel_yres = readw(tmp + 27);
- printk("radeonfb: detected DFP panel size from BIOS: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- for(i=0; i<32; i++) {
- tmp0 = rinfo->bios_seg + readw(tmp+64+i*2);
- if (tmp0 == 0)
- break;
- if ((readw(tmp0) == rinfo->panel_xres) &&
- (readw(tmp0+2) == rinfo->panel_yres)) {
- rinfo->hblank = (readw(tmp0+17) - readw(tmp0+19)) * 8;
- rinfo->hOver_plus = ((readw(tmp0+21) - readw(tmp0+19) -1) * 8) & 0x7fff;
- rinfo->hSync_width = readb(tmp0+23) * 8;
- rinfo->vblank = readw(tmp0+24) - readw(tmp0+26);
- rinfo->vOver_plus = (readw(tmp0+28) & 0x7ff) - readw(tmp0+26);
- rinfo->vSync_width = (readw(tmp0+28) & 0xf800) >> 11;
- rinfo->clock = readw(tmp0+9);
-
- rinfo->got_dfpinfo = 1;
- return 1;
- }
- }
-
- return 0;
-}
-
-
-
-static int radeon_get_dfpinfo (struct radeonfb_info *rinfo)
-{
- unsigned int tmp;
- unsigned short a, b;
-
- if (radeon_get_dfpinfo_BIOS(rinfo))
- radeon_update_default_var(rinfo);
-
- if (radeon_dfp_parse_EDID(rinfo))
- radeon_update_default_var(rinfo);
-
- if (!rinfo->got_dfpinfo) {
- /*
- * it seems all else has failed now and we
- * resort to probing registers for our DFP info
- */
- if (panel_yres) {
- rinfo->panel_yres = panel_yres;
- } else {
- tmp = INREG(FP_VERT_STRETCH);
- tmp &= 0x00fff000;
- rinfo->panel_yres = (unsigned short)(tmp >> 0x0c) + 1;
- }
-
- switch (rinfo->panel_yres) {
- case 480:
- rinfo->panel_xres = 640;
- break;
- case 600:
- rinfo->panel_xres = 800;
- break;
- case 768:
-#if defined(__powerpc__)
- if (rinfo->dviDisp_type == MT_LCD)
- rinfo->panel_xres = 1152;
- else
-#endif
- rinfo->panel_xres = 1024;
- break;
- case 1024:
- rinfo->panel_xres = 1280;
- break;
- case 1050:
- rinfo->panel_xres = 1400;
- break;
- case 1200:
- rinfo->panel_xres = 1600;
- break;
- default:
- printk("radeonfb: Failed to detect DFP panel size\n");
- return 0;
- }
-
- printk("radeonfb: detected DFP panel size from registers: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- tmp = INREG(FP_CRTC_H_TOTAL_DISP);
- a = (tmp & FP_CRTC_H_TOTAL_MASK) + 4;
- b = (tmp & 0x01ff0000) >> FP_CRTC_H_DISP_SHIFT;
- rinfo->hblank = (a - b + 1) * 8;
-
- tmp = INREG(FP_H_SYNC_STRT_WID);
- rinfo->hOver_plus = (unsigned short) ((tmp & FP_H_SYNC_STRT_CHAR_MASK) >>
- FP_H_SYNC_STRT_CHAR_SHIFT) - b - 1;
- rinfo->hOver_plus *= 8;
- rinfo->hSync_width = (unsigned short) ((tmp & FP_H_SYNC_WID_MASK) >>
- FP_H_SYNC_WID_SHIFT);
- rinfo->hSync_width *= 8;
- tmp = INREG(FP_CRTC_V_TOTAL_DISP);
- a = (tmp & FP_CRTC_V_TOTAL_MASK) + 1;
- b = (tmp & FP_CRTC_V_DISP_MASK) >> FP_CRTC_V_DISP_SHIFT;
- rinfo->vblank = a - b /* + 24 */ ;
-
- tmp = INREG(FP_V_SYNC_STRT_WID);
- rinfo->vOver_plus = (unsigned short) (tmp & FP_V_SYNC_STRT_MASK)
- - b + 1;
- rinfo->vSync_width = (unsigned short) ((tmp & FP_V_SYNC_WID_MASK) >>
- FP_V_SYNC_WID_SHIFT);
-
- return 1;
- }
-
- return 1;
-}
-
-
-#ifdef CONFIG_PPC_OF
-static int radeon_read_OF (struct radeonfb_info *rinfo)
-{
- struct device_node *dp;
- unsigned int *xtal;
-
- dp = pci_device_to_OF_node(rinfo->pdev);
-
- xtal = (unsigned int *) get_property(dp, "ATY,RefCLK", NULL);
-
- rinfo->pll.ref_clk = *xtal / 10;
-
- if (*xtal)
- return 1;
- else
- return 0;
-}
-#endif
-
-
-static void radeon_engine_init (struct radeonfb_info *rinfo)
-{
- u32 temp;
-
- /* disable 3D engine */
- OUTREG(RB3D_CNTL, 0);
-
- radeon_engine_reset ();
-
- radeon_fifo_wait (1);
- OUTREG(RB2D_DSTCACHE_MODE, 0);
-
- radeon_fifo_wait (1);
- temp = INREG(DEFAULT_PITCH_OFFSET);
- OUTREG(DEFAULT_PITCH_OFFSET, ((temp & 0xc0000000) |
- (rinfo->pitch << 0x16)));
-
- radeon_fifo_wait (1);
- OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
-
- radeon_fifo_wait (1);
- OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
- DEFAULT_SC_BOTTOM_MAX));
-
- temp = radeon_get_dstbpp(rinfo->depth);
- rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
- radeon_fifo_wait (1);
- OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
- GMC_BRUSH_SOLID_COLOR |
- GMC_SRC_DATATYPE_COLOR));
-
- radeon_fifo_wait (7);
-
- /* clear line drawing regs */
- OUTREG(DST_LINE_START, 0);
- OUTREG(DST_LINE_END, 0);
-
- /* set brush color regs */
- OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
- OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
-
- /* set source color regs */
- OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
- OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
-
- /* default write mask */
- OUTREG(DP_WRITE_MSK, 0xffffffff);
-
- radeon_engine_idle ();
-}
-
-
-static int __devinit radeon_init_disp (struct radeonfb_info *rinfo)
-{
- struct fb_info *info = &rinfo->info;
- struct fb_var_screeninfo var;
-
- var = radeonfb_default_var;
- if ((radeon_init_disp_var(rinfo, &var)) < 0)
- return -1;
-
- rinfo->depth = var_to_depth(&var);
- rinfo->bpp = var.bits_per_pixel;
-
- info->var = var;
- fb_alloc_cmap(&info->cmap, 256, 0);
-
- var.activate = FB_ACTIVATE_NOW;
- return 0;
-}
-
-
-static int radeon_init_disp_var (struct radeonfb_info *rinfo,
- struct fb_var_screeninfo *var)
-{
-#ifndef MODULE
- if (mode_option)
- fb_find_mode (var, &rinfo->info, mode_option,
- NULL, 0, NULL, 8);
- else
-#endif
- if (rinfo->use_default_var)
- /* We will use the modified default far */
- *var = radeonfb_default_var;
- else
-
- fb_find_mode (var, &rinfo->info, "640x480-8@60",
- NULL, 0, NULL, 0);
-
- if (noaccel)
- var->accel_flags &= ~FB_ACCELF_TEXT;
- else
- var->accel_flags |= FB_ACCELF_TEXT;
-
- return 0;
-}
-
-
-static int radeon_do_maximize(struct radeonfb_info *rinfo,
- struct fb_var_screeninfo *var,
- struct fb_var_screeninfo *v,
- int nom, int den)
-{
- static struct {
- int xres, yres;
- } modes[] = {
- {1600, 1280},
- {1280, 1024},
- {1024, 768},
- {800, 600},
- {640, 480},
- {-1, -1}
- };
- int i;
-
- /* use highest possible virtual resolution */
- if (v->xres_virtual == -1 && v->yres_virtual == -1) {
- printk("radeonfb: using max available virtual resolution\n");
- for (i=0; modes[i].xres != -1; i++) {
- if (modes[i].xres * nom / den * modes[i].yres <
- rinfo->video_ram / 2)
- break;
- }
- if (modes[i].xres == -1) {
- printk("radeonfb: could not find virtual resolution that fits into video memory!\n");
- return -EINVAL;
- }
- v->xres_virtual = modes[i].xres;
- v->yres_virtual = modes[i].yres;
-
- printk("radeonfb: virtual resolution set to max of %dx%d\n",
- v->xres_virtual, v->yres_virtual);
- } else if (v->xres_virtual == -1) {
- v->xres_virtual = (rinfo->video_ram * den /
- (nom * v->yres_virtual * 2)) & ~15;
- } else if (v->yres_virtual == -1) {
- v->xres_virtual = (v->xres_virtual + 15) & ~15;
- v->yres_virtual = rinfo->video_ram * den /
- (nom * v->xres_virtual *2);
- } else {
- if (v->xres_virtual * nom / den * v->yres_virtual >
- rinfo->video_ram) {
- return -EINVAL;
- }
- }
-
- if (v->xres_virtual * nom / den >= 8192) {
- v->xres_virtual = 8192 * den / nom - 16;
- }
-
- if (v->xres_virtual < v->xres)
- return -EINVAL;
-
- if (v->yres_virtual < v->yres)
- return -EINVAL;
-
- return 0;
-}
-
-
-static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info->par;
- struct fb_var_screeninfo v;
- int nom, den;
-
- memcpy (&v, var, sizeof (v));
-
- switch (v.bits_per_pixel) {
- case 0 ... 8:
- v.bits_per_pixel = 8;
- break;
- case 9 ... 16:
- v.bits_per_pixel = 16;
- break;
- case 17 ... 24:
-#if 0 /* Doesn't seem to work */
- v.bits_per_pixel = 24;
- break;
-#endif
- return -EINVAL;
- case 25 ... 32:
- v.bits_per_pixel = 32;
- break;
- default:
- return -EINVAL;
- }
-
- switch (var_to_depth(&v)) {
- case 8:
- nom = den = 1;
- v.red.offset = v.green.offset = v.blue.offset = 0;
- v.red.length = v.green.length = v.blue.length = 8;
- v.transp.offset = v.transp.length = 0;
- break;
- case 15:
- nom = 2;
- den = 1;
- v.red.offset = 10;
- v.green.offset = 5;
- v.blue.offset = 0;
- v.red.length = v.green.length = v.blue.length = 5;
- v.transp.offset = v.transp.length = 0;
- break;
- case 16:
- nom = 2;
- den = 1;
- v.red.offset = 11;
- v.green.offset = 5;
- v.blue.offset = 0;
- v.red.length = 5;
- v.green.length = 6;
- v.blue.length = 5;
- v.transp.offset = v.transp.length = 0;
- break;
- case 24:
- nom = 4;
- den = 1;
- v.red.offset = 16;
- v.green.offset = 8;
- v.blue.offset = 0;
- v.red.length = v.blue.length = v.green.length = 8;
- v.transp.offset = v.transp.length = 0;
- break;
- case 32:
- nom = 4;
- den = 1;
- v.red.offset = 16;
- v.green.offset = 8;
- v.blue.offset = 0;
- v.red.length = v.blue.length = v.green.length = 8;
- v.transp.offset = 24;
- v.transp.length = 8;
- break;
- default:
- printk ("radeonfb: mode %dx%dx%d rejected, color depth invalid\n",
- var->xres, var->yres, var->bits_per_pixel);
- return -EINVAL;
- }
-
- if (radeon_do_maximize(rinfo, var, &v, nom, den) < 0)
- return -EINVAL;
-
- if (v.xoffset < 0)
- v.xoffset = 0;
- if (v.yoffset < 0)
- v.yoffset = 0;
-
- if (v.xoffset > v.xres_virtual - v.xres)
- v.xoffset = v.xres_virtual - v.xres - 1;
-
- if (v.yoffset > v.yres_virtual - v.yres)
- v.yoffset = v.yres_virtual - v.yres - 1;
-
- v.red.msb_right = v.green.msb_right = v.blue.msb_right =
- v.transp.offset = v.transp.length =
- v.transp.msb_right = 0;
-
- if (noaccel)
- v.accel_flags = 0;
-
- memcpy(var, &v, sizeof(v));
-
- return 0;
-}
-
-
-static int radeonfb_pan_display (struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
-
- if ((var->xoffset + var->xres > var->xres_virtual)
- || (var->yoffset + var->yres > var->yres_virtual))
- return -EINVAL;
-
- if (rinfo->asleep)
- return 0;
-
- OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
- * var->bits_per_pixel / 8) & ~7);
- return 0;
-}
-
-
-static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,
- unsigned long arg)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- unsigned int tmp;
- u32 value = 0;
- int rc;
-
- switch (cmd) {
- /*
- * TODO: set mirror accordingly for non-Mobility chipsets with 2 CRTC's
- */
- case FBIO_RADEON_SET_MIRROR:
- switch (rinfo->arch) {
- case RADEON_R100:
- case RADEON_RV100:
- case RADEON_R200:
- case RADEON_RV200:
- case RADEON_RV250:
- case RADEON_R300:
- return -EINVAL;
- default:
- /* RADEON M6, RADEON_M7, RADEON_M9 */
- break;
- }
-
- rc = get_user(value, (__u32 __user *)arg);
-
- if (rc)
- return rc;
-
- if (value & 0x01) {
- tmp = INREG(LVDS_GEN_CNTL);
-
- tmp |= (LVDS_ON | LVDS_BLON);
- } else {
- tmp = INREG(LVDS_GEN_CNTL);
-
- tmp &= ~(LVDS_ON | LVDS_BLON);
- }
-
- OUTREG(LVDS_GEN_CNTL, tmp);
-
- if (value & 0x02) {
- tmp = INREG(CRTC_EXT_CNTL);
- tmp |= CRTC_CRT_ON;
-
- mirror = 1;
- } else {
- tmp = INREG(CRTC_EXT_CNTL);
- tmp &= ~CRTC_CRT_ON;
-
- mirror = 0;
- }
-
- OUTREG(CRTC_EXT_CNTL, tmp);
-
- break;
- case FBIO_RADEON_GET_MIRROR:
- switch (rinfo->arch) {
- case RADEON_R100:
- case RADEON_RV100:
- case RADEON_R200:
- case RADEON_RV200:
- case RADEON_RV250:
- case RADEON_R300:
- return -EINVAL;
- default:
- /* RADEON M6, RADEON_M7, RADEON_M9 */
- break;
- }
-
- tmp = INREG(LVDS_GEN_CNTL);
- if ((LVDS_ON | LVDS_BLON) & tmp)
- value |= 0x01;
-
- tmp = INREG(CRTC_EXT_CNTL);
- if (CRTC_CRT_ON & tmp)
- value |= 0x02;
-
- return put_user(value, (__u32 __user *)arg);
- default:
- return -EINVAL;
- }
-
- return -EINVAL;
-}
-
-
-static int radeonfb_blank (int blank, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- u32 val = INREG(CRTC_EXT_CNTL);
- u32 val2 = INREG(LVDS_GEN_CNTL);
-
- if (rinfo->asleep)
- return 0;
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->dviDisp_type == MT_LCD && _machine == _MACH_Pmac) {
- set_backlight_enable(!blank);
- return 0;
- }
-#endif
-
- /* reset it */
- val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
- CRTC_VSYNC_DIS);
- val2 &= ~(LVDS_DISPLAY_DIS);
-
- switch (blank) {
- case FB_BLANK_UNBLANK:
- case FB_BLANK_NORMAL:
- break;
- case FB_BLANK_VSYNC_SUSPEND:
- val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS);
- break;
- case FB_BLANK_HSYNC_SUSPEND:
- val |= (CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS);
- break;
- case FB_BLANK_POWERDOWN:
- val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS |
- CRTC_HSYNC_DIS);
- val2 |= (LVDS_DISPLAY_DIS);
- break;
- }
-
- switch (rinfo->dviDisp_type) {
- case MT_LCD:
- OUTREG(LVDS_GEN_CNTL, val2);
- break;
- case MT_CRT:
- default:
- OUTREG(CRTC_EXT_CNTL, val);
- break;
- }
-
- /* let fbcon do a soft blank for us */
- return (blank == FB_BLANK_NORMAL) ? 1 : 0;
-}
-
-
-static int radeonfb_setcolreg (unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- u32 pindex, vclk_cntl;
- unsigned int i;
-
- if (regno > 255)
- return 1;
-
- red >>= 8;
- green >>= 8;
- blue >>= 8;
- rinfo->palette[regno].red = red;
- rinfo->palette[regno].green = green;
- rinfo->palette[regno].blue = blue;
-
- /* default */
- pindex = regno;
-
- if (!rinfo->asleep) {
- vclk_cntl = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, vclk_cntl & ~PIXCLK_DAC_ALWAYS_ONb);
-
- if (rinfo->bpp == 16) {
- pindex = regno * 8;
-
- if (rinfo->depth == 16 && regno > 63)
- return 1;
- if (rinfo->depth == 15 && regno > 31)
- return 1;
-
- /* For 565, the green component is mixed one order below */
- if (rinfo->depth == 16) {
- OUTREG(PALETTE_INDEX, pindex>>1);
- OUTREG(PALETTE_DATA, (rinfo->palette[regno>>1].red << 16) |
- (green << 8) | (rinfo->palette[regno>>1].blue));
- green = rinfo->palette[regno<<1].green;
- }
- }
-
- if (rinfo->depth != 16 || regno < 32) {
- OUTREG(PALETTE_INDEX, pindex);
- OUTREG(PALETTE_DATA, (red << 16) | (green << 8) | blue);
- }
-
- OUTPLL(VCLK_ECP_CNTL, vclk_cntl);
- }
- if (regno < 16) {
- switch (rinfo->depth) {
- case 15:
- ((u16 *) (info->pseudo_palette))[regno] =
- (regno << 10) | (regno << 5) | regno;
- break;
- case 16:
- ((u16 *) (info->pseudo_palette))[regno] =
- (regno << 11) | (regno << 6) | regno;
- break;
- case 24:
- ((u32 *) (info->pseudo_palette))[regno] =
- (regno << 16) | (regno << 8) | regno;
- break;
- case 32:
- i = (regno << 8) | regno;
- ((u32 *) (info->pseudo_palette))[regno] =
- (i << 16) | i;
- break;
- }
- }
- return 0;
-}
-
-
-
-static void radeon_save_state (struct radeonfb_info *rinfo,
- struct radeon_regs *save)
-{
- /* CRTC regs */
- save->crtc_gen_cntl = INREG(CRTC_GEN_CNTL);
- save->crtc_ext_cntl = INREG(CRTC_EXT_CNTL);
- save->dac_cntl = INREG(DAC_CNTL);
- save->crtc_h_total_disp = INREG(CRTC_H_TOTAL_DISP);
- save->crtc_h_sync_strt_wid = INREG(CRTC_H_SYNC_STRT_WID);
- save->crtc_v_total_disp = INREG(CRTC_V_TOTAL_DISP);
- save->crtc_v_sync_strt_wid = INREG(CRTC_V_SYNC_STRT_WID);
- save->crtc_pitch = INREG(CRTC_PITCH);
-#if defined(__BIG_ENDIAN)
- save->surface_cntl = INREG(SURFACE_CNTL);
-#endif
-
- /* FP regs */
- save->fp_crtc_h_total_disp = INREG(FP_CRTC_H_TOTAL_DISP);
- save->fp_crtc_v_total_disp = INREG(FP_CRTC_V_TOTAL_DISP);
- save->fp_gen_cntl = INREG(FP_GEN_CNTL);
- save->fp_h_sync_strt_wid = INREG(FP_H_SYNC_STRT_WID);
- save->fp_horz_stretch = INREG(FP_HORZ_STRETCH);
- save->fp_v_sync_strt_wid = INREG(FP_V_SYNC_STRT_WID);
- save->fp_vert_stretch = INREG(FP_VERT_STRETCH);
- save->lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
- save->lvds_pll_cntl = INREG(LVDS_PLL_CNTL);
- save->tmds_crc = INREG(TMDS_CRC);
- save->tmds_transmitter_cntl = INREG(TMDS_TRANSMITTER_CNTL);
- save->vclk_ecp_cntl = INPLL(VCLK_ECP_CNTL);
-}
-
-
-
-static int radeonfb_set_par (struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *)info->par;
- struct fb_var_screeninfo *mode = &info->var;
- struct radeon_regs newmode;
- int hTotal, vTotal, hSyncStart, hSyncEnd,
- hSyncPol, vSyncStart, vSyncEnd, vSyncPol, cSync;
- u8 hsync_adj_tab[] = {0, 0x12, 9, 9, 6, 5};
- u8 hsync_fudge_fp[] = {2, 2, 0, 0, 5, 5};
- u32 dotClock = 1000000000 / mode->pixclock,
- sync, h_sync_pol, v_sync_pol;
- int freq = dotClock / 10; /* x 100 */
- int xclk_freq, vclk_freq, xclk_per_trans, xclk_per_trans_precise;
- int useable_precision, roff, ron;
- int min_bits, format = 0;
- int hsync_start, hsync_fudge, bytpp, hsync_wid, vsync_wid;
- int primary_mon = PRIMARY_MONITOR(rinfo);
- int depth = var_to_depth(mode);
- int accel = (mode->accel_flags & FB_ACCELF_TEXT) != 0;
-
- rinfo->xres = mode->xres;
- rinfo->yres = mode->yres;
- rinfo->xres_virtual = mode->xres_virtual;
- rinfo->yres_virtual = mode->yres_virtual;
- rinfo->pixclock = mode->pixclock;
-
- hSyncStart = mode->xres + mode->right_margin;
- hSyncEnd = hSyncStart + mode->hsync_len;
- hTotal = hSyncEnd + mode->left_margin;
-
- vSyncStart = mode->yres + mode->lower_margin;
- vSyncEnd = vSyncStart + mode->vsync_len;
- vTotal = vSyncEnd + mode->upper_margin;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- if (rinfo->panel_xres < mode->xres)
- rinfo->xres = mode->xres = rinfo->panel_xres;
- if (rinfo->panel_yres < mode->yres)
- rinfo->yres = mode->yres = rinfo->panel_yres;
-
- hTotal = mode->xres + rinfo->hblank;
- hSyncStart = mode->xres + rinfo->hOver_plus;
- hSyncEnd = hSyncStart + rinfo->hSync_width;
-
- vTotal = mode->yres + rinfo->vblank;
- vSyncStart = mode->yres + rinfo->vOver_plus;
- vSyncEnd = vSyncStart + rinfo->vSync_width;
- }
-
- sync = mode->sync;
- h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
- v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
-
- RTRACE("hStart = %d, hEnd = %d, hTotal = %d\n",
- hSyncStart, hSyncEnd, hTotal);
- RTRACE("vStart = %d, vEnd = %d, vTotal = %d\n",
- vSyncStart, vSyncEnd, vTotal);
-
- hsync_wid = (hSyncEnd - hSyncStart) / 8;
- vsync_wid = vSyncEnd - vSyncStart;
- if (hsync_wid == 0)
- hsync_wid = 1;
- else if (hsync_wid > 0x3f) /* max */
- hsync_wid = 0x3f;
-
- if (vsync_wid == 0)
- vsync_wid = 1;
- else if (vsync_wid > 0x1f) /* max */
- vsync_wid = 0x1f;
-
- hSyncPol = mode->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
- vSyncPol = mode->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
-
- cSync = mode->sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
-
- format = radeon_get_dstbpp(depth);
- bytpp = mode->bits_per_pixel >> 3;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD))
- hsync_fudge = hsync_fudge_fp[format-1];
- else
- hsync_fudge = hsync_adj_tab[format-1];
-
- hsync_start = hSyncStart - 8 + hsync_fudge;
-
- newmode.crtc_gen_cntl = CRTC_EXT_DISP_EN | CRTC_EN |
- (format << 8);
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- newmode.crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN;
- if (mirror)
- newmode.crtc_ext_cntl |= CRTC_CRT_ON;
-
- newmode.crtc_gen_cntl &= ~(CRTC_DBL_SCAN_EN |
- CRTC_INTERLACE_EN);
- } else {
- newmode.crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN |
- CRTC_CRT_ON;
- }
-
- newmode.dac_cntl = /* INREG(DAC_CNTL) | */ DAC_MASK_ALL | DAC_VGA_ADR_EN |
- DAC_8BIT_EN;
-
- newmode.crtc_h_total_disp = ((((hTotal / 8) - 1) & 0x3ff) |
- (((mode->xres / 8) - 1) << 16));
-
- newmode.crtc_h_sync_strt_wid = ((hsync_start & 0x1fff) |
- (hsync_wid << 16) | (h_sync_pol << 23));
-
- newmode.crtc_v_total_disp = ((vTotal - 1) & 0xffff) |
- ((mode->yres - 1) << 16);
-
- newmode.crtc_v_sync_strt_wid = (((vSyncStart - 1) & 0xfff) |
- (vsync_wid << 16) | (v_sync_pol << 23));
-
- if (accel) {
- /* We first calculate the engine pitch */
- rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f)
- & ~(0x3f)) >> 6;
-
- /* Then, re-multiply it to get the CRTC pitch */
- newmode.crtc_pitch = (rinfo->pitch << 3) / ((mode->bits_per_pixel + 1) / 8);
- } else
- newmode.crtc_pitch = (mode->xres_virtual >> 3);
- newmode.crtc_pitch |= (newmode.crtc_pitch << 16);
-
-#if defined(__BIG_ENDIAN)
- /*
- * It looks like recent chips have a problem with SURFACE_CNTL,
- * setting SURF_TRANSLATION_DIS completely disables the
- * swapper as well, so we leave it unset now.
- */
- newmode.surface_cntl = 0;
-
- /* Setup swapping on both apertures, though we currently
- * only use aperture 0, enabling swapper on aperture 1
- * won't harm
- */
- switch (mode->bits_per_pixel) {
- case 16:
- newmode.surface_cntl |= NONSURF_AP0_SWP_16BPP;
- newmode.surface_cntl |= NONSURF_AP1_SWP_16BPP;
- break;
- case 24:
- case 32:
- newmode.surface_cntl |= NONSURF_AP0_SWP_32BPP;
- newmode.surface_cntl |= NONSURF_AP1_SWP_32BPP;
- break;
- }
-#endif
-
- rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f)
- & ~(0x3f)) / 64;
-
- RTRACE("h_total_disp = 0x%x\t hsync_strt_wid = 0x%x\n",
- newmode.crtc_h_total_disp, newmode.crtc_h_sync_strt_wid);
- RTRACE("v_total_disp = 0x%x\t vsync_strt_wid = 0x%x\n",
- newmode.crtc_v_total_disp, newmode.crtc_v_sync_strt_wid);
-
- newmode.xres = mode->xres;
- newmode.yres = mode->yres;
-
- rinfo->bpp = mode->bits_per_pixel;
- rinfo->depth = depth;
-
- if (freq > rinfo->pll.ppll_max)
- freq = rinfo->pll.ppll_max;
- if (freq*12 < rinfo->pll.ppll_min)
- freq = rinfo->pll.ppll_min / 12;
-
- {
- struct {
- int divider;
- int bitvalue;
- } *post_div,
- post_divs[] = {
- { 1, 0 },
- { 2, 1 },
- { 4, 2 },
- { 8, 3 },
- { 3, 4 },
- { 16, 5 },
- { 6, 6 },
- { 12, 7 },
- { 0, 0 },
- };
-
- for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
- rinfo->pll_output_freq = post_div->divider * freq;
- if (rinfo->pll_output_freq >= rinfo->pll.ppll_min &&
- rinfo->pll_output_freq <= rinfo->pll.ppll_max)
- break;
- }
-
- rinfo->post_div = post_div->divider;
- rinfo->fb_div = round_div(rinfo->pll.ref_div*rinfo->pll_output_freq,
- rinfo->pll.ref_clk);
- newmode.ppll_ref_div = rinfo->pll.ref_div;
- newmode.ppll_div_3 = rinfo->fb_div | (post_div->bitvalue << 16);
- }
- newmode.vclk_ecp_cntl = rinfo->init_state.vclk_ecp_cntl;
-
-#ifdef CONFIG_PPC_OF
- /* Gross hack for iBook with M7 until I find out a proper fix */
- if (machine_is_compatible("PowerBook4,3") && rinfo->arch == RADEON_M7)
- newmode.ppll_div_3 = 0x000600ad;
-#endif /* CONFIG_PPC_OF */
-
- RTRACE("post div = 0x%x\n", rinfo->post_div);
- RTRACE("fb_div = 0x%x\n", rinfo->fb_div);
- RTRACE("ppll_div_3 = 0x%x\n", newmode.ppll_div_3);
-
- /* DDA */
- vclk_freq = round_div(rinfo->pll.ref_clk * rinfo->fb_div,
- rinfo->pll.ref_div * rinfo->post_div);
- xclk_freq = rinfo->pll.xclk;
-
- xclk_per_trans = round_div(xclk_freq * 128, vclk_freq * mode->bits_per_pixel);
-
- min_bits = min_bits_req(xclk_per_trans);
- useable_precision = min_bits + 1;
-
- xclk_per_trans_precise = round_div((xclk_freq * 128) << (11 - useable_precision),
- vclk_freq * mode->bits_per_pixel);
-
- ron = (4 * rinfo->ram.mb + 3 * _max(rinfo->ram.trcd - 2, 0) +
- 2 * rinfo->ram.trp + rinfo->ram.twr + rinfo->ram.cl + rinfo->ram.tr2w +
- xclk_per_trans) << (11 - useable_precision);
- roff = xclk_per_trans_precise * (32 - 4);
-
- RTRACE("ron = %d, roff = %d\n", ron, roff);
- RTRACE("vclk_freq = %d, per = %d\n", vclk_freq, xclk_per_trans_precise);
-
- if ((ron + rinfo->ram.rloop) >= roff) {
- printk("radeonfb: error ron out of range\n");
- return -EINVAL;
- }
-
- newmode.dda_config = (xclk_per_trans_precise |
- (useable_precision << 16) |
- (rinfo->ram.rloop << 20));
- newmode.dda_on_off = (ron << 16) | roff;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- unsigned int hRatio, vRatio;
-
- /* We force the pixel clock to be always enabled. Allowing it
- * to be power managed during blanking would save power, but has
- * nasty interactions with the 2D engine & sleep code that haven't
- * been solved yet. --BenH
- */
- newmode.vclk_ecp_cntl &= ~PIXCLK_DAC_ALWAYS_ONb;
-
- if (mode->xres > rinfo->panel_xres)
- mode->xres = rinfo->panel_xres;
- if (mode->yres > rinfo->panel_yres)
- mode->yres = rinfo->panel_yres;
-
- newmode.fp_horz_stretch = (((rinfo->panel_xres / 8) - 1)
- << HORZ_PANEL_SHIFT);
- newmode.fp_vert_stretch = ((rinfo->panel_yres - 1)
- << VERT_PANEL_SHIFT);
-
- if (mode->xres != rinfo->panel_xres) {
- hRatio = round_div(mode->xres * HORZ_STRETCH_RATIO_MAX,
- rinfo->panel_xres);
- newmode.fp_horz_stretch = (((((unsigned long)hRatio) & HORZ_STRETCH_RATIO_MASK)) |
- (newmode.fp_horz_stretch &
- (HORZ_PANEL_SIZE | HORZ_FP_LOOP_STRETCH |
- HORZ_AUTO_RATIO_INC)));
- newmode.fp_horz_stretch |= (HORZ_STRETCH_BLEND |
- HORZ_STRETCH_ENABLE);
- }
- newmode.fp_horz_stretch &= ~HORZ_AUTO_RATIO;
-
- if (mode->yres != rinfo->panel_yres) {
- vRatio = round_div(mode->yres * VERT_STRETCH_RATIO_MAX,
- rinfo->panel_yres);
- newmode.fp_vert_stretch = (((((unsigned long)vRatio) & VERT_STRETCH_RATIO_MASK)) |
- (newmode.fp_vert_stretch &
- (VERT_PANEL_SIZE | VERT_STRETCH_RESERVED)));
- newmode.fp_vert_stretch |= (VERT_STRETCH_BLEND |
- VERT_STRETCH_ENABLE);
- }
- newmode.fp_vert_stretch &= ~VERT_AUTO_RATIO_EN;
-
- newmode.fp_gen_cntl = (rinfo->init_state.fp_gen_cntl & (u32)
- ~(FP_SEL_CRTC2 |
- FP_RMX_HVSYNC_CONTROL_EN |
- FP_DFP_SYNC_SEL |
- FP_CRT_SYNC_SEL |
- FP_CRTC_LOCK_8DOT |
- FP_USE_SHADOW_EN |
- FP_CRTC_USE_SHADOW_VEND |
- FP_CRT_SYNC_ALT));
-
- newmode.fp_gen_cntl |= (FP_CRTC_DONT_SHADOW_VPAR |
- FP_CRTC_DONT_SHADOW_HEND);
-
- newmode.lvds_gen_cntl = rinfo->init_state.lvds_gen_cntl;
- newmode.lvds_pll_cntl = rinfo->init_state.lvds_pll_cntl;
- newmode.tmds_crc = rinfo->init_state.tmds_crc;
- newmode.tmds_transmitter_cntl = rinfo->init_state.tmds_transmitter_cntl;
-
- if (primary_mon == MT_LCD) {
- newmode.lvds_gen_cntl |= (LVDS_ON | LVDS_BLON);
- newmode.fp_gen_cntl &= ~(FP_FPON | FP_TMDS_EN);
- } else {
- /* DFP */
- newmode.fp_gen_cntl |= (FP_FPON | FP_TMDS_EN);
- newmode.tmds_transmitter_cntl = (TMDS_RAN_PAT_RST |
- TMDS_ICHCSEL | TMDS_PLL_EN) &
- ~(TMDS_PLLRST);
- newmode.crtc_ext_cntl &= ~CRTC_CRT_ON;
- }
-
- newmode.fp_crtc_h_total_disp = (((rinfo->hblank / 8) & 0x3ff) |
- (((mode->xres / 8) - 1) << 16));
- newmode.fp_crtc_v_total_disp = (rinfo->vblank & 0xffff) |
- ((mode->yres - 1) << 16);
- newmode.fp_h_sync_strt_wid = ((rinfo->hOver_plus & 0x1fff) |
- (hsync_wid << 16) | (h_sync_pol << 23));
- newmode.fp_v_sync_strt_wid = ((rinfo->vOver_plus & 0xfff) |
- (vsync_wid << 16) | (v_sync_pol << 23));
- }
-
- /* do it! */
- if (!rinfo->asleep) {
- radeon_write_mode (rinfo, &newmode);
- /* (re)initialize the engine */
- if (noaccel)
- radeon_engine_init (rinfo);
-
- }
- /* Update fix */
- if (accel)
- info->fix.line_length = rinfo->pitch*64;
- else
- info->fix.line_length = mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8);
- info->fix.visual = rinfo->depth == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
-
-#ifdef CONFIG_BOOTX_TEXT
- /* Update debug text engine */
- btext_update_display(rinfo->fb_base_phys, mode->xres, mode->yres,
- rinfo->depth, info->fix.line_length);
-#endif
-
- return 0;
-}
-
-
-static void radeon_write_mode (struct radeonfb_info *rinfo,
- struct radeon_regs *mode)
-{
- int i;
- int primary_mon = PRIMARY_MONITOR(rinfo);
-
- radeonfb_blank(VESA_POWERDOWN, (struct fb_info *)rinfo);
-
-
- if (rinfo->arch == RADEON_M6) {
- for (i=0; i<7; i++)
- OUTREG(common_regs_m6[i].reg, common_regs_m6[i].val);
- } else {
- for (i=0; i<9; i++)
- OUTREG(common_regs[i].reg, common_regs[i].val);
- }
-
- OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl);
- OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl,
- CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS);
- OUTREGP(DAC_CNTL, mode->dac_cntl, DAC_RANGE_CNTL | DAC_BLANKING);
- OUTREG(CRTC_H_TOTAL_DISP, mode->crtc_h_total_disp);
- OUTREG(CRTC_H_SYNC_STRT_WID, mode->crtc_h_sync_strt_wid);
- OUTREG(CRTC_V_TOTAL_DISP, mode->crtc_v_total_disp);
- OUTREG(CRTC_V_SYNC_STRT_WID, mode->crtc_v_sync_strt_wid);
- OUTREG(CRTC_OFFSET, 0);
- OUTREG(CRTC_OFFSET_CNTL, 0);
- OUTREG(CRTC_PITCH, mode->crtc_pitch);
-
-#if defined(__BIG_ENDIAN)
- OUTREG(SURFACE_CNTL, mode->surface_cntl);
-#endif
-
- while ((INREG(CLOCK_CNTL_INDEX) & PPLL_DIV_SEL_MASK) !=
- PPLL_DIV_SEL_MASK) {
- OUTREGP(CLOCK_CNTL_INDEX, PPLL_DIV_SEL_MASK, 0xffff);
- }
-
- OUTPLLP(PPLL_CNTL, PPLL_RESET, 0xffff);
-
- while ((INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK) !=
- (mode->ppll_ref_div & PPLL_REF_DIV_MASK)) {
- OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, ~PPLL_REF_DIV_MASK);
- }
-
- while ((INPLL(PPLL_DIV_3) & PPLL_FB3_DIV_MASK) !=
- (mode->ppll_div_3 & PPLL_FB3_DIV_MASK)) {
- OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_FB3_DIV_MASK);
- }
-
- while ((INPLL(PPLL_DIV_3) & PPLL_POST3_DIV_MASK) !=
- (mode->ppll_div_3 & PPLL_POST3_DIV_MASK)) {
- OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_POST3_DIV_MASK);
- }
-
- OUTPLL(HTOTAL_CNTL, 0);
-
- OUTPLLP(PPLL_CNTL, 0, ~PPLL_RESET);
-
-// OUTREG(DDA_CONFIG, mode->dda_config);
-// OUTREG(DDA_ON_OFF, mode->dda_on_off);
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
- OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
- OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
- OUTREG(FP_V_SYNC_STRT_WID, mode->fp_v_sync_strt_wid);
- OUTREG(FP_HORZ_STRETCH, mode->fp_horz_stretch);
- OUTREG(FP_VERT_STRETCH, mode->fp_vert_stretch);
- OUTREG(FP_GEN_CNTL, mode->fp_gen_cntl);
- OUTREG(TMDS_CRC, mode->tmds_crc);
- OUTREG(TMDS_TRANSMITTER_CNTL, mode->tmds_transmitter_cntl);
-
- if (primary_mon == MT_LCD) {
- unsigned int tmp = INREG(LVDS_GEN_CNTL);
-
- mode->lvds_gen_cntl &= ~LVDS_STATE_MASK;
- mode->lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_STATE_MASK);
-
- if ((tmp & (LVDS_ON | LVDS_BLON)) ==
- (mode->lvds_gen_cntl & (LVDS_ON | LVDS_BLON))) {
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- } else {
- if (mode->lvds_gen_cntl & (LVDS_ON | LVDS_BLON)) {
- udelay(1000);
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- } else {
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl |
- LVDS_BLON);
- udelay(1000);
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- }
- }
- }
- }
-
- radeonfb_blank(VESA_NO_BLANKING, (struct fb_info *)rinfo);
-
- OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
-
- return;
-}
-
-static struct fb_ops radeonfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = radeonfb_check_var,
- .fb_set_par = radeonfb_set_par,
- .fb_setcolreg = radeonfb_setcolreg,
- .fb_pan_display = radeonfb_pan_display,
- .fb_blank = radeonfb_blank,
- .fb_ioctl = radeonfb_ioctl,
-#if 0
- .fb_fillrect = radeonfb_fillrect,
- .fb_copyarea = radeonfb_copyarea,
- .fb_imageblit = radeonfb_imageblit,
- .fb_rasterimg = radeonfb_rasterimg,
-#else
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-#endif
-};
-
-
-static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
-{
- struct fb_info *info;
-
- info = &rinfo->info;
-
- info->par = rinfo;
- info->pseudo_palette = rinfo->pseudo_palette;
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
- info->fbops = &radeonfb_ops;
- info->screen_base = rinfo->fb_base;
-
- /* Fill fix common fields */
- strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
- info->fix.smem_start = rinfo->fb_base_phys;
- info->fix.smem_len = rinfo->video_ram;
- info->fix.type = FB_TYPE_PACKED_PIXELS;
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- info->fix.xpanstep = 8;
- info->fix.ypanstep = 1;
- info->fix.ywrapstep = 0;
- info->fix.type_aux = 0;
- info->fix.mmio_start = rinfo->mmio_base_phys;
- info->fix.mmio_len = RADEON_REGSIZE;
- if (noaccel)
- info->fix.accel = FB_ACCEL_NONE;
- else
- info->fix.accel = FB_ACCEL_ATI_RADEON;
-
- if (radeon_init_disp (rinfo) < 0)
- return -1;
-
- return 0;
-}
-
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-
-/* TODO: Dbl check these tables, we don't go up to full ON backlight
- * in these, possibly because we noticed MacOS doesn't, but I'd prefer
- * having some more official numbers from ATI
- */
-static int backlight_conv_m6[] = {
- 0xff, 0xc0, 0xb5, 0xaa, 0x9f, 0x94, 0x89, 0x7e,
- 0x73, 0x68, 0x5d, 0x52, 0x47, 0x3c, 0x31, 0x24
-};
-static int backlight_conv_m7[] = {
- 0x00, 0x3f, 0x4a, 0x55, 0x60, 0x6b, 0x76, 0x81,
- 0x8c, 0x97, 0xa2, 0xad, 0xb8, 0xc3, 0xce, 0xd9
-};
-
-#define BACKLIGHT_LVDS_OFF
-#undef BACKLIGHT_DAC_OFF
-
-/* We turn off the LCD completely instead of just dimming the backlight.
- * This provides some greater power saving and the display is useless
- * without backlight anyway.
- */
-
-static int radeon_set_backlight_enable(int on, int level, void *data)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- unsigned int lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
- int* conv_table;
-
- /* Pardon me for that hack... maybe some day we can figure
- * out in what direction backlight should work on a given
- * panel ?
- */
- if ((rinfo->arch == RADEON_M7 || rinfo->arch == RADEON_M9)
- && !machine_is_compatible("PowerBook4,3"))
- conv_table = backlight_conv_m7;
- else
- conv_table = backlight_conv_m6;
-
- lvds_gen_cntl |= (LVDS_BL_MOD_EN | LVDS_BLON);
- if (on && (level > BACKLIGHT_OFF)) {
- lvds_gen_cntl |= LVDS_DIGON;
- if (!(lvds_gen_cntl & LVDS_ON)) {
- lvds_gen_cntl &= ~LVDS_BLON;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- (void)INREG(LVDS_GEN_CNTL);
- mdelay(10);
- lvds_gen_cntl |= LVDS_BLON;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- }
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[level] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= (LVDS_ON | LVDS_EN);
- lvds_gen_cntl &= ~LVDS_DISPLAY_DIS;
- } else {
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[0] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= LVDS_DISPLAY_DIS;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- udelay(10);
- lvds_gen_cntl &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGON);
- }
-
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |= (lvds_gen_cntl & LVDS_STATE_MASK);
-
- return 0;
-}
-
-static int radeon_set_backlight_level(int level, void *data)
-{
- return radeon_set_backlight_enable(1, level, data);
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-
-#ifdef CONFIG_PMAC_PBOOK
-
-static u32 dbg_clk;
-
-/*
- * Radeon M6 Power Management code. This code currently only supports
- * the mobile chips, it's based from some informations provided by ATI
- * along with hours of tracing of MacOS drivers
- */
-
-static void radeon_pm_save_regs(struct radeonfb_info *rinfo)
-{
- rinfo->save_regs[0] = INPLL(PLL_PWRMGT_CNTL);
- rinfo->save_regs[1] = INPLL(CLK_PWRMGT_CNTL);
- rinfo->save_regs[2] = INPLL(MCLK_CNTL);
- rinfo->save_regs[3] = INPLL(SCLK_CNTL);
- rinfo->save_regs[4] = INPLL(CLK_PIN_CNTL);
- rinfo->save_regs[5] = INPLL(VCLK_ECP_CNTL);
- rinfo->save_regs[6] = INPLL(PIXCLKS_CNTL);
- rinfo->save_regs[7] = INPLL(MCLK_MISC);
- rinfo->save_regs[8] = INPLL(P2PLL_CNTL);
-
- rinfo->save_regs[9] = INREG(DISP_MISC_CNTL);
- rinfo->save_regs[10] = INREG(DISP_PWR_MAN);
- rinfo->save_regs[11] = INREG(LVDS_GEN_CNTL);
- rinfo->save_regs[12] = INREG(LVDS_PLL_CNTL);
- rinfo->save_regs[13] = INREG(TV_DAC_CNTL);
- rinfo->save_regs[14] = INREG(BUS_CNTL1);
- rinfo->save_regs[15] = INREG(CRTC_OFFSET_CNTL);
- rinfo->save_regs[16] = INREG(AGP_CNTL);
- rinfo->save_regs[17] = (INREG(CRTC_GEN_CNTL) & 0xfdffffff) | 0x04000000;
- rinfo->save_regs[18] = (INREG(CRTC2_GEN_CNTL) & 0xfdffffff) | 0x04000000;
- rinfo->save_regs[19] = INREG(GPIOPAD_A);
- rinfo->save_regs[20] = INREG(GPIOPAD_EN);
- rinfo->save_regs[21] = INREG(GPIOPAD_MASK);
- rinfo->save_regs[22] = INREG(ZV_LCDPAD_A);
- rinfo->save_regs[23] = INREG(ZV_LCDPAD_EN);
- rinfo->save_regs[24] = INREG(ZV_LCDPAD_MASK);
- rinfo->save_regs[25] = INREG(GPIO_VGA_DDC);
- rinfo->save_regs[26] = INREG(GPIO_DVI_DDC);
- rinfo->save_regs[27] = INREG(GPIO_MONID);
- rinfo->save_regs[28] = INREG(GPIO_CRT2_DDC);
-
- rinfo->save_regs[29] = INREG(SURFACE_CNTL);
- rinfo->save_regs[30] = INREG(MC_FB_LOCATION);
- rinfo->save_regs[31] = INREG(DISPLAY_BASE_ADDR);
- rinfo->save_regs[32] = INREG(MC_AGP_LOCATION);
- rinfo->save_regs[33] = INREG(CRTC2_DISPLAY_BASE_ADDR);
-}
-
-static void radeon_pm_restore_regs(struct radeonfb_info *rinfo)
-{
- OUTPLL(P2PLL_CNTL, rinfo->save_regs[8] & 0xFFFFFFFE); /* First */
-
- OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]);
- OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]);
- OUTPLL(MCLK_CNTL, rinfo->save_regs[2]);
- OUTPLL(SCLK_CNTL, rinfo->save_regs[3]);
- OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]);
- OUTPLL(VCLK_ECP_CNTL, rinfo->save_regs[5]);
- OUTPLL(PIXCLKS_CNTL, rinfo->save_regs[6]);
- OUTPLL(MCLK_MISC, rinfo->save_regs[7]);
-
- OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
- OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
- OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11]);
- OUTREG(LVDS_PLL_CNTL,rinfo->save_regs[12]);
- OUTREG(TV_DAC_CNTL, rinfo->save_regs[13]);
- OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
- OUTREG(CRTC_OFFSET_CNTL, rinfo->save_regs[15]);
- OUTREG(AGP_CNTL, rinfo->save_regs[16]);
- OUTREG(CRTC_GEN_CNTL, rinfo->save_regs[17]);
- OUTREG(CRTC2_GEN_CNTL, rinfo->save_regs[18]);
-
- // wait VBL before that one ?
- OUTPLL(P2PLL_CNTL, rinfo->save_regs[8]);
-
- OUTREG(GPIOPAD_A, rinfo->save_regs[19]);
- OUTREG(GPIOPAD_EN, rinfo->save_regs[20]);
- OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]);
- OUTREG(ZV_LCDPAD_A, rinfo->save_regs[22]);
- OUTREG(ZV_LCDPAD_EN, rinfo->save_regs[23]);
- OUTREG(ZV_LCDPAD_MASK, rinfo->save_regs[24]);
- OUTREG(GPIO_VGA_DDC, rinfo->save_regs[25]);
- OUTREG(GPIO_DVI_DDC, rinfo->save_regs[26]);
- OUTREG(GPIO_MONID, rinfo->save_regs[27]);
- OUTREG(GPIO_CRT2_DDC, rinfo->save_regs[28]);
-}
-
-static void radeon_pm_disable_iopad(struct radeonfb_info *rinfo)
-{
- OUTREG(GPIOPAD_MASK, 0x0001ffff);
- OUTREG(GPIOPAD_EN, 0x00000400);
- OUTREG(GPIOPAD_A, 0x00000000);
- OUTREG(ZV_LCDPAD_MASK, 0x00000000);
- OUTREG(ZV_LCDPAD_EN, 0x00000000);
- OUTREG(ZV_LCDPAD_A, 0x00000000);
- OUTREG(GPIO_VGA_DDC, 0x00030000);
- OUTREG(GPIO_DVI_DDC, 0x00000000);
- OUTREG(GPIO_MONID, 0x00030000);
- OUTREG(GPIO_CRT2_DDC, 0x00000000);
-}
-
-static void radeon_pm_program_v2clk(struct radeonfb_info *rinfo)
-{
-//
-// u32 reg;
-//
-// OUTPLL(P2PLL_REF_DIV, 0x0c);
-//
-// .../... figure out what macos does here
-}
-
-static void radeon_pm_low_current(struct radeonfb_info *rinfo)
-{
- u32 reg;
-
- reg = INREG(BUS_CNTL1);
- reg &= ~BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK;
- reg |= BUS_CNTL1_AGPCLK_VALID | (1<<BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT);
- OUTREG(BUS_CNTL1, reg);
-
- reg = INPLL(PLL_PWRMGT_CNTL);
- reg |= PLL_PWRMGT_CNTL_SPLL_TURNOFF | PLL_PWRMGT_CNTL_PPLL_TURNOFF |
- PLL_PWRMGT_CNTL_P2PLL_TURNOFF | PLL_PWRMGT_CNTL_TVPLL_TURNOFF;
- reg &= ~PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK;
- reg &= ~PLL_PWRMGT_CNTL_MOBILE_SU;
- OUTPLL(PLL_PWRMGT_CNTL, reg);
-
-// reg = INPLL(TV_PLL_CNTL1);
-// reg |= TV_PLL_CNTL1__TVPLL_RESET | TV_PLL_CNTL1__TVPLL_SLEEP;
-// OUTPLL(TV_PLL_CNTL1, reg);
-
- reg = INREG(TV_DAC_CNTL);
- reg &= ~(TV_DAC_CNTL_BGADJ_MASK |TV_DAC_CNTL_DACADJ_MASK);
- reg |=TV_DAC_CNTL_BGSLEEP | TV_DAC_CNTL_RDACPD | TV_DAC_CNTL_GDACPD |
- TV_DAC_CNTL_BDACPD |
- (8<<TV_DAC_CNTL_BGADJ__SHIFT) | (8<<TV_DAC_CNTL_DACADJ__SHIFT);
- OUTREG(TV_DAC_CNTL, reg);
-
- reg = INREG(TMDS_TRANSMITTER_CNTL);
- reg &= ~(TMDS_PLL_EN |TMDS_PLLRST);
- OUTREG(TMDS_TRANSMITTER_CNTL, reg);
-
-// lvds_pll_cntl = regr32(g, LVDS_PLL_CNTL);
-// lvds_pll_cntl &= ~LVDS_PLL_CNTL__LVDS_PLL_EN;
-// lvds_pll_cntl |= LVDS_PLL_CNTL__LVDS_PLL_RESET;
-// regw32(g, LVDS_PLL_CNTL, lvds_pll_cntl);
-
- reg = INREG(DAC_CNTL);
- reg &= ~DAC_CMP_EN;
- OUTREG(DAC_CNTL, reg);
-
- reg = INREG(DAC_CNTL2);
- reg &= ~DAC2_CMP_EN;
- OUTREG(DAC_CNTL2, reg);
-
- reg = INREG(TV_DAC_CNTL);
- reg &= ~TV_DAC_CNTL_DETECT;
- OUTREG(TV_DAC_CNTL, reg);
-}
-
-static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
-{
- /* This code is disabled. It does what is in the pm_init
- * function of the MacOS driver code ATI sent me. However,
- * it doesn't fix my sleep problem, and is causing other issues
- * on wakeup (bascially the machine dying when switching consoles
- * I haven't had time to investigate this yet
- */
-#if 0
- u32 disp_misc_cntl;
- u32 disp_pwr_man;
- u32 temp;
-
- // set SPLL, MPLL, PPLL, P2PLL, TVPLL, SCLK, MCLK, PCLK, P2CLK,
- // TCLK and TEST_MODE to 0
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTPLL(CLK_PWRMGT_CNTL , temp & ~0xc00002ff);
-
- // Turn on Power Management
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTPLL(CLK_PWRMGT_CNTL , temp | 0x00000400);
-
- // Turn off display clock if using mobile chips
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTREG(CLK_PWRMGT_CNTL , temp | 0x00100000);
-
- // Force PIXCLK_ALWAYS_ON and PIXCLK_DAC_ALWAYS_ON
- temp = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, temp & ~0x000000c0);
-
- // Force ECP_FORCE_ON to 1
- temp = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, temp | 0x00040000);
-
- // Force PIXCLK_BLEND_ALWAYS_ON and PIXCLK_GV_ALWAYS_ON
- temp = INPLL(PIXCLKS_CNTL);
- OUTPLL(PIXCLKS_CNTL, temp & ~0x00001800);
-
- // Forcing SCLK_CNTL to ON
- OUTPLL(SCLK_CNTL, (INPLL(SCLK_CNTL)& 0x00000007) | 0xffff8000 );
-
- // Set PM control over XTALIN pad
- temp = INPLL(CLK_PIN_CNTL);
- OUTPLL(CLK_PIN_CNTL, temp | 0x00080000);
-
- // Force MCLK and YCLK and MC as dynamic
- temp = INPLL(MCLK_CNTL);
- OUTPLL(MCLK_CNTL, temp & 0xffeaffff);
-
- // PLL_TURNOFF
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp | 0x0000001f);
-
- // set MOBILE_SU to 1 if M6 or DDR64 is detected
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp | 0x00010000);
-
- // select PM access mode (PM_MODE_SEL) (use ACPI mode)
-// temp = INPLL(PLL_PWRMGT_CNTL);
-// OUTPLL(PLL_PWRMGT_CNTL, temp | 0x00002000);
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp & ~0x00002000);
-
- // set DISP_MISC_CNTL register
- disp_misc_cntl = INREG(DISP_MISC_CNTL);
- disp_misc_cntl &= ~( DISP_MISC_CNTL_SOFT_RESET_GRPH_PP |
- DISP_MISC_CNTL_SOFT_RESET_SUBPIC_PP |
- DISP_MISC_CNTL_SOFT_RESET_OV0_PP |
- DISP_MISC_CNTL_SOFT_RESET_GRPH_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_SUBPIC_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_OV0_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_GRPH2_PP |
- DISP_MISC_CNTL_SOFT_RESET_GRPH2_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_LVDS |
- DISP_MISC_CNTL_SOFT_RESET_TMDS |
- DISP_MISC_CNTL_SOFT_RESET_DIG_TMDS |
- DISP_MISC_CNTL_SOFT_RESET_TV);
- OUTREG(DISP_MISC_CNTL, disp_misc_cntl);
-
- // set DISP_PWR_MAN register
- disp_pwr_man = INREG(DISP_PWR_MAN);
- // clau - 9.29.2000 - changes made to bit23:18 to set to 1 as requested by George
- disp_pwr_man |= (DISP_PWR_MAN_DIG_TMDS_ENABLE_RST |
- DISP_PWR_MAN_TV_ENABLE_RST |
- // DISP_PWR_MAN_AUTO_PWRUP_EN |
- DISP_PWR_MAN_DISP_D3_GRPH_RST |
- DISP_PWR_MAN_DISP_D3_SUBPIC_RST |
- DISP_PWR_MAN_DISP_D3_OV0_RST |
- DISP_PWR_MAN_DISP_D1D2_GRPH_RST |
- DISP_PWR_MAN_DISP_D1D2_SUBPIC_RST |
- DISP_PWR_MAN_DISP_D1D2_OV0_RST);
- disp_pwr_man &= ~(DISP_PWR_MAN_DISP_PWR_MAN_D3_CRTC_EN |
- DISP_PWR_MAN_DISP2_PWR_MAN_D3_CRTC2_EN|
- DISP_PWR_MAN_DISP_D3_RST |
- DISP_PWR_MAN_DISP_D3_REG_RST);
- OUTREG(DISP_PWR_MAN, disp_pwr_man);
-
- // clau - 10.24.2000
- // - add in setting for BUS_CNTL1 b27:26 = 0x01 and b31 = 0x1
- // - add in setting for AGP_CNTL b7:0 = 0x20
- // - add in setting for DVI_DDC_DATA_OUT_EN b17:16 = 0x0
-
- // the following settings (two lines) are applied at a later part of this function, only on mobile platform
- // requres -mobile flag
- OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & 0xf3ffffff) | 0x04000000);
- OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | 0x80000000);
- OUTREG(AGP_CNTL, (INREG(AGP_CNTL) & 0xffffff00) | 0x20);
- OUTREG(GPIO_DVI_DDC, INREG(GPIO_DVI_DDC) & 0xfffcffff);
-
- // yulee - 12.12.2000
- // A12 only
- // EN_MCLK_TRISTATE_IN_SUSPEND@MCLK_MISC = 1
- // ACCESS_REGS_IN_SUSPEND@CLK_PIN_CNTL = 0
- // only on mobile platform
- OUTPLL(MCLK_MISC, INPLL(MCLK_MISC) | 0x00040000 );
-
- // yulee -12.12.2000
- // AGPCLK_VALID@BUS_CNTL1 = 1
- // MOBILE_PLATFORM_SEL@BUS_CNTL1 = 01
- // CRTC_STEREO_SYNC_OUT_EN@CRTC_OFFSET_CNTL = 0
- // CG_CLK_TO_OUTPIN@CLK_PIN_CNTL = 0
- // only on mobile platform
- OUTPLL(CLK_PIN_CNTL, INPLL(CLK_PIN_CNTL ) & 0xFFFFF7FF );
- OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1 ) & 0xF3FFFFFF) | 0x84000000 );
- OUTREG(CRTC_OFFSET_CNTL, INREG(CRTC_OFFSET_CNTL ) & 0xFFEFFFFF );
-
- mdelay(100);
-#endif
-
- /* Disable CRTCs */
- OUTREG(CRTC_GEN_CNTL, (INREG(CRTC_GEN_CNTL) & ~CRTC_EN) | CRTC_DISP_REQ_EN_B);
- OUTREG(CRTC2_GEN_CNTL, (INREG(CRTC2_GEN_CNTL) & ~CRTC2_EN) | CRTC2_DISP_REQ_EN_B);
- (void)INREG(CRTC2_GEN_CNTL);
- mdelay(17);
-}
-
-static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
-{
- u16 pwr_cmd;
-
- if (!rinfo->pm_reg)
- return;
-
- /* Set the chip into appropriate suspend mode (we use D2,
- * D3 would require a compete re-initialization of the chip,
- * including PCI config registers, clocks, AGP conf, ...)
- */
- if (suspend) {
- /* According to ATI, we should program V2CLK here, I have
- * to verify what's up exactly
- */
- /* Save some registers */
- radeon_pm_save_regs(rinfo);
-
- /* Check that on M7 too, might work might not. M7 may also
- * need explicit enabling of PM
- */
- if (rinfo->arch == RADEON_M6) {
- /* Program V2CLK */
- radeon_pm_program_v2clk(rinfo);
-
- /* Disable IO PADs */
- radeon_pm_disable_iopad(rinfo);
-
- /* Set low current */
- radeon_pm_low_current(rinfo);
-
- /* Prepare chip for power management */
- radeon_pm_setup_for_suspend(rinfo);
-
- /* Reset the MDLL */
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) | MCKOA_RESET);
- (void)INPLL(MDLL_RDCKA);
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) & ~MCKOA_RESET);
- (void)INPLL(MDLL_RDCKA);
- }
-
- /* Switch PCI power managment to D2. */
- for (;;) {
- pci_read_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- &pwr_cmd);
- if (pwr_cmd & 2)
- break;
- pci_write_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
- mdelay(500);
- }
- } else {
- /* Switch back PCI powermanagment to D0 */
- mdelay(200);
- pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
- mdelay(500);
-
- dbg_clk = INPLL(1);
-
- /* Do we need that on M7 ? */
- if (rinfo->arch == RADEON_M6) {
- /* Restore the MDLL */
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) & ~MCKOA_RESET);
- (void)INPLL(MDLL_CKO);
- }
-
- /* Restore some registers */
- radeon_pm_restore_regs(rinfo);
- }
-}
-
-/*
- * Save the contents of the framebuffer when we go to sleep,
- * and restore it when we wake up again.
- */
-
-int radeon_sleep_notify(struct pmu_sleep_notifier *self, int when)
-{
- struct radeonfb_info *rinfo;
-
- for (rinfo = board_list; rinfo != NULL; rinfo = rinfo->next) {
- struct fb_fix_screeninfo fix;
- int nb;
- struct display *disp;
-
- disp = (rinfo->currcon < 0) ? rinfo->info.disp : &fb_display[rinfo->currcon];
-
- switch (rinfo->arch) {
- case RADEON_M6:
- case RADEON_M7:
- case RADEON_M9:
- break;
- default:
- return PBOOK_SLEEP_REFUSE;
- }
-
- radeonfb_get_fix(&fix, fg_console, (struct fb_info *)rinfo);
- nb = fb_display[fg_console].var.yres * fix.line_length;
-
- switch (when) {
- case PBOOK_SLEEP_NOW:
- acquire_console_sem();
- disp->dispsw = &fbcon_dummy;
-
- if (!noaccel) {
- /* Make sure engine is reset */
- radeon_engine_reset();
- radeon_engine_idle();
- }
-
- /* Blank display and LCD */
- radeonfb_blank(VESA_POWERDOWN+1,
- (struct fb_info *)rinfo);
-
- /* Sleep */
- rinfo->asleep = 1;
- radeon_set_suspend(rinfo, 1);
- release_console_sem();
-
- break;
- case PBOOK_WAKE:
- acquire_console_sem();
- /* Wakeup */
- radeon_set_suspend(rinfo, 0);
-
- if (!noaccel)
- radeon_engine_init(rinfo);
- rinfo->asleep = 0;
- radeon_set_dispsw(rinfo, disp);
- radeon_load_video_mode(rinfo, &disp->var);
- do_install_cmap(rinfo->currcon < 0 ? 0 : rinfo->currcon,
- (struct fb_info *)rinfo);
-
- radeonfb_blank(0, (struct fb_info *)rinfo);
- release_console_sem();
- printk("CLK_PIN_CNTL on wakeup was: %08x\n", dbg_clk);
- break;
- }
- }
-
- return PBOOK_SLEEP_OK;
-}
-
-#endif /* CONFIG_PMAC_PBOOK */
-
-static int radeonfb_pci_register (struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct radeonfb_info *rinfo;
- struct radeon_chip_info *rci = &radeon_chip_info[ent->driver_data];
- u32 tmp;
-
- RTRACE("radeonfb_pci_register BEGIN\n");
-
- /* Enable device in PCI config */
- if (pci_enable_device(pdev) != 0) {
- printk(KERN_ERR "radeonfb: Cannot enable PCI device\n");
- return -ENODEV;
- }
-
- rinfo = kmalloc (sizeof (struct radeonfb_info), GFP_KERNEL);
- if (!rinfo) {
- printk ("radeonfb: could not allocate memory\n");
- return -ENODEV;
- }
-
- memset (rinfo, 0, sizeof (struct radeonfb_info));
- //info = &rinfo->info;
- rinfo->pdev = pdev;
- strcpy(rinfo->name, rci->name);
- rinfo->arch = rci->arch;
-
- /* Set base addrs */
- rinfo->fb_base_phys = pci_resource_start (pdev, 0);
- rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
-
- /* request the mem regions */
- if (!request_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0), "radeonfb")) {
- printk ("radeonfb: cannot reserve FB region\n");
- kfree (rinfo);
- return -ENODEV;
- }
-
- if (!request_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2), "radeonfb")) {
- printk ("radeonfb: cannot reserve MMIO region\n");
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- /* map the regions */
- rinfo->mmio_base = ioremap (rinfo->mmio_base_phys, RADEON_REGSIZE);
- if (!rinfo->mmio_base) {
- printk ("radeonfb: cannot map MMIO\n");
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- rinfo->chipset = pdev->device;
-
- switch (rinfo->arch) {
- case RADEON_R100:
- rinfo->hasCRTC2 = 0;
- break;
- default:
- /* all the rest have it */
- rinfo->hasCRTC2 = 1;
- break;
- }
-#if 0
- if (rinfo->arch == RADEON_M7) {
- /*
- * Noticed some errors in accel with M7, will have to work these out...
- */
- noaccel = 1;
- }
-#endif
- if (mirror)
- printk("radeonfb: mirroring display to CRT\n");
-
- /* framebuffer size */
- tmp = INREG(CONFIG_MEMSIZE);
-
- /* mem size is bits [28:0], mask off the rest */
- rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
-
- /* ram type */
- tmp = INREG(MEM_SDRAM_MODE_REG);
- switch ((MEM_CFG_TYPE & tmp) >> 30) {
- case 0:
- /* SDR SGRAM (2:1) */
- strcpy(rinfo->ram_type, "SDR SGRAM");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 4;
- rinfo->ram.trcd = 1;
- rinfo->ram.trp = 2;
- rinfo->ram.twr = 1;
- rinfo->ram.cl = 2;
- rinfo->ram.loop_latency = 16;
- rinfo->ram.rloop = 16;
-
- break;
- case 1:
- /* DDR SGRAM */
- strcpy(rinfo->ram_type, "DDR SGRAM");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 4;
- rinfo->ram.trcd = 3;
- rinfo->ram.trp = 3;
- rinfo->ram.twr = 2;
- rinfo->ram.cl = 3;
- rinfo->ram.tr2w = 1;
- rinfo->ram.loop_latency = 16;
- rinfo->ram.rloop = 16;
-
- break;
- default:
- /* 64-bit SDR SGRAM */
- strcpy(rinfo->ram_type, "SDR SGRAM 64");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 8;
- rinfo->ram.trcd = 3;
- rinfo->ram.trp = 3;
- rinfo->ram.twr = 1;
- rinfo->ram.cl = 3;
- rinfo->ram.tr2w = 1;
- rinfo->ram.loop_latency = 17;
- rinfo->ram.rloop = 17;
-
- break;
- }
-
- rinfo->bios_seg = radeon_find_rom(rinfo);
- radeon_get_pllinfo(rinfo, rinfo->bios_seg);
-
- /*
- * Hack to get around some busted production M6's
- * reporting no ram
- */
- if (rinfo->video_ram == 0) {
- switch (pdev->device) {
- case PCI_DEVICE_ID_ATI_RADEON_LY:
- case PCI_DEVICE_ID_ATI_RADEON_LZ:
- rinfo->video_ram = 8192 * 1024;
- break;
- default:
- break;
- }
- }
-
-
- RTRACE("radeonfb: probed %s %dk videoram\n", (rinfo->ram_type), (rinfo->video_ram/1024));
-
-#if !defined(__powerpc__)
- radeon_get_moninfo(rinfo);
-#else
- switch (pdev->device) {
- case PCI_DEVICE_ID_ATI_RADEON_LW:
- case PCI_DEVICE_ID_ATI_RADEON_LX:
- case PCI_DEVICE_ID_ATI_RADEON_LY:
- case PCI_DEVICE_ID_ATI_RADEON_LZ:
- rinfo->dviDisp_type = MT_LCD;
- break;
- default:
- radeon_get_moninfo(rinfo);
- break;
- }
-#endif
-
- radeon_get_EDID(rinfo);
-
- if ((rinfo->dviDisp_type == MT_DFP) || (rinfo->dviDisp_type == MT_LCD) ||
- (rinfo->crtDisp_type == MT_DFP)) {
- if (!radeon_get_dfpinfo(rinfo)) {
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
- }
-
- rinfo->fb_base = ioremap (rinfo->fb_base_phys, rinfo->video_ram);
- if (!rinfo->fb_base) {
- printk ("radeonfb: cannot map FB\n");
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- /* I SHOULD FIX THAT CRAP ! I should probably mimmic XFree DRI
- * driver setup here.
- *
- * On PPC, OF based cards setup the internal memory
- * mapping in strange ways. We change it so that the
- * framebuffer is mapped at 0 and given half of the card's
- * address space (2Gb). AGP is mapped high (0xe0000000) and
- * can use up to 512Mb. Once DRI is fully implemented, we
- * will have to setup the PCI remapper to remap the agp_special_page
- * memory page somewhere between those regions so that the card
- * use a normal PCI bus master cycle to access the ring read ptr.
- * --BenH.
- */
-#ifdef CONFIG_ALL_PPC
- if (rinfo->hasCRTC2)
- OUTREG(CRTC2_GEN_CNTL,
- (INREG(CRTC2_GEN_CNTL) & ~CRTC2_EN) | CRTC2_DISP_REQ_EN_B);
- OUTREG(CRTC_EXT_CNTL, INREG(CRTC_EXT_CNTL) | CRTC_DISPLAY_DIS);
- OUTREG(MC_FB_LOCATION, 0x7fff0000);
- OUTREG(MC_AGP_LOCATION, 0xffffe000);
- OUTREG(DISPLAY_BASE_ADDR, 0x00000000);
- if (rinfo->hasCRTC2)
- OUTREG(CRTC2_DISPLAY_BASE_ADDR, 0x00000000);
- OUTREG(SRC_OFFSET, 0x00000000);
- OUTREG(DST_OFFSET, 0x00000000);
- mdelay(10);
- OUTREG(CRTC_EXT_CNTL, INREG(CRTC_EXT_CNTL) & ~CRTC_DISPLAY_DIS);
-#endif /* CONFIG_ALL_PPC */
-
- /* save current mode regs before we switch into the new one
- * so we can restore this upon __exit
- */
- radeon_save_state (rinfo, &rinfo->init_state);
-
- /* set all the vital stuff */
- radeon_set_fbinfo (rinfo);
-
- pci_set_drvdata(pdev, rinfo);
- rinfo->next = board_list;
- board_list = rinfo;
- ((struct fb_info *) rinfo)->device = &pdev->dev;
- if (register_framebuffer ((struct fb_info *) rinfo) < 0) {
- printk ("radeonfb: could not register framebuffer\n");
- iounmap(rinfo->fb_base);
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
-#ifdef CONFIG_MTRR
- rinfo->mtrr_hdl = nomtrr ? -1 : mtrr_add(rinfo->fb_base_phys,
- rinfo->video_ram,
- MTRR_TYPE_WRCOMB, 1);
-#endif
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->dviDisp_type == MT_LCD)
- register_backlight_controller(&radeon_backlight_controller,
- rinfo, "ati");
-#endif
-
-#ifdef CONFIG_PMAC_PBOOK
- if (rinfo->dviDisp_type == MT_LCD) {
- rinfo->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
- pmu_register_sleep_notifier(&radeon_sleep_notifier);
- }
-#endif
-
- printk ("radeonfb: ATI Radeon %s %s %d MB\n", rinfo->name, rinfo->ram_type,
- (rinfo->video_ram/(1024*1024)));
-
- if (rinfo->hasCRTC2) {
- printk("radeonfb: DVI port %s monitor connected\n",
- GET_MON_NAME(rinfo->dviDisp_type));
- printk("radeonfb: CRT port %s monitor connected\n",
- GET_MON_NAME(rinfo->crtDisp_type));
- } else {
- printk("radeonfb: CRT port %s monitor connected\n",
- GET_MON_NAME(rinfo->crtDisp_type));
- }
-
- RTRACE("radeonfb_pci_register END\n");
-
- return 0;
-}
-
-
-
-static void __devexit radeonfb_pci_unregister (struct pci_dev *pdev)
-{
- struct radeonfb_info *rinfo = pci_get_drvdata(pdev);
-
- if (!rinfo)
- return;
-
- /* restore original state
- *
- * Doesn't quite work yet, possibly because of the PPC hacking
- * I do on startup, disable for now. --BenH
- */
- radeon_write_mode (rinfo, &rinfo->init_state);
-
-#ifdef CONFIG_MTRR
- if (rinfo->mtrr_hdl >= 0)
- mtrr_del(rinfo->mtrr_hdl, 0, 0);
-#endif
-
- unregister_framebuffer ((struct fb_info *) rinfo);
-
- iounmap(rinfo->mmio_base);
- iounmap(rinfo->fb_base);
-
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
-
- kfree (rinfo);
-}
-
-
-static struct pci_driver radeonfb_driver = {
- .name = "radeonfb",
- .id_table = radeonfb_pci_table,
- .probe = radeonfb_pci_register,
- .remove = __devexit_p(radeonfb_pci_unregister),
-};
-
-#ifndef MODULE
-static int __init radeonfb_old_setup (char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return 0;
-
- while ((this_opt = strsep (&options, ",")) != NULL) {
- if (!*this_opt)
- continue;
- if (!strncmp(this_opt, "noaccel", 7)) {
- noaccel = 1;
- } else if (!strncmp(this_opt, "mirror", 6)) {
- mirror = 1;
- } else if (!strncmp(this_opt, "dfp", 3)) {
- force_dfp = 1;
- } else if (!strncmp(this_opt, "panel_yres:", 11)) {
- panel_yres = simple_strtoul((this_opt+11), NULL, 0);
- } else if (!strncmp(this_opt, "nomtrr", 6)) {
- nomtrr = 1;
- } else
- mode_option = this_opt;
- }
-
- return 0;
-}
-#endif /* MODULE */
-
-static int __init radeonfb_old_init (void)
-{
-#ifndef MODULE
- char *option = NULL;
-
- if (fb_get_options("radeonfb_old", &option))
- return -ENODEV;
- radeonfb_old_setup(option);
-#endif
- return pci_register_driver (&radeonfb_driver);
-}
-
-
-static void __exit radeonfb_old_exit (void)
-{
- pci_unregister_driver (&radeonfb_driver);
-}
-
-module_init(radeonfb_old_init);
-module_exit(radeonfb_old_exit);
-
-
-MODULE_AUTHOR("Ani Joshi");
-MODULE_DESCRIPTION("framebuffer driver for ATI Radeon chipset");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index f841f01..3e9308f 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -49,6 +49,7 @@
#include <asm/pci-bridge.h>
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/machdep.h>
#include <asm/backlight.h>
#endif
@@ -1247,7 +1248,7 @@
CRTCout(par, 0x1a, vesa);
#ifdef CONFIG_PMAC_BACKLIGHT
- if ( par->FlatPanel && _machine == _MACH_Pmac) {
+ if ( par->FlatPanel && machine_is(powermac)) {
set_backlight_enable(!blank);
}
#endif
@@ -2037,9 +2038,9 @@
info->fix.smem_len / (1024 * 1024),
info->fix.smem_start);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (default_par->FlatPanel && _machine == _MACH_Pmac)
- register_backlight_controller(&riva_backlight_controller,
- default_par, "mnca");
+ if (default_par->FlatPanel && machine_is(powermac))
+ register_backlight_controller(&riva_backlight_controller,
+ default_par, "mnca");
#endif
NVTRACE_LEAVE();
return 0;
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index dc93336..1a9a60c 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -34,36 +34,20 @@
* for them to fix it and steal their solution. prumpf
*/
+#include <asm/io.h>
+
#define STI_WAIT 1
-#include <asm/io.h> /* for USE_HPPA_IOREMAP */
-
-#if USE_HPPA_IOREMAP
-
-#define STI_PTR(p) (p)
-#define PTR_STI(p) (p)
-static inline int STI_CALL( unsigned long func,
- void *flags, void *inptr, void *outptr, void *glob_cfg )
-{
- int (*f)(void *,void *,void *,void *);
- f = (void*)func;
- return f(flags, inptr, outptr, glob_cfg);
-}
-
-#else /* !USE_HPPA_IOREMAP */
-
#define STI_PTR(p) ( virt_to_phys(p) )
-#define PTR_STI(p) ( phys_to_virt((long)p) )
-#define STI_CALL(func, flags, inptr, outptr, glob_cfg) \
- ({ \
- pdc_sti_call( func, (unsigned long)STI_PTR(flags), \
- (unsigned long)STI_PTR(inptr), \
- (unsigned long)STI_PTR(outptr), \
- (unsigned long)STI_PTR(glob_cfg)); \
+#define PTR_STI(p) ( phys_to_virt((unsigned long)p) )
+#define STI_CALL(func, flags, inptr, outptr, glob_cfg) \
+ ({ \
+ pdc_sti_call( func, STI_PTR(flags), \
+ STI_PTR(inptr), \
+ STI_PTR(outptr), \
+ STI_PTR(glob_cfg)); \
})
-#endif /* USE_HPPA_IOREMAP */
-
#define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x)
#define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y)
@@ -352,8 +336,9 @@
struct sti_conf_outptr outptr; /* configuration */
struct sti_conf_outptr_ext outptr_ext;
- /* PCI data structures (pg. 17ff from sti.pdf) */
struct pci_dev *pd;
+
+ /* PCI data structures (pg. 17ff from sti.pdf) */
u8 rm_entry[16]; /* pci region mapper array == pci config space offset */
/* pointer to the fb_info where this STI device is used */
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 56d71d6..4a292aa 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -3,7 +3,7 @@
* Low level Frame buffer driver for HP workstations with
* STI (standard text interface) video firmware.
*
- * Copyright (C) 2001-2005 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
* Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
*
* Based on:
@@ -514,7 +514,7 @@
SETUP_HW(fb);
WRITE_BYTE(1, fb, REG_16b1);
- fb_memset(fb->info.fix.smem_start, 0xff,
+ fb_memset((void*)fb->info.fix.smem_start, 0xff,
fb->info.var.yres*fb->info.fix.line_length);
CRX24_SET_OVLY_MASK(fb);
@@ -908,83 +908,6 @@
/* ------------------- driver specific functions --------------------------- */
-#define TMPBUFLEN 2048
-
-static ssize_t
-stifb_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
- unsigned long p = *ppos;
- struct inode *inode = file->f_dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
- char tmpbuf[TMPBUFLEN];
-
- if (!info || ! info->screen_base)
- return -ENODEV;
-
- if (p >= info->fix.smem_len)
- return 0;
- if (count >= info->fix.smem_len)
- count = info->fix.smem_len;
- if (count + p > info->fix.smem_len)
- count = info->fix.smem_len - p;
- if (count > sizeof(tmpbuf))
- count = sizeof(tmpbuf);
- if (count) {
- char *base_addr;
-
- base_addr = info->screen_base;
- memcpy_fromio(&tmpbuf, base_addr+p, count);
- count -= copy_to_user(buf, &tmpbuf, count);
- if (!count)
- return -EFAULT;
- *ppos += count;
- }
- return count;
-}
-
-static ssize_t
-stifb_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-{
- struct inode *inode = file->f_dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
- unsigned long p = *ppos;
- size_t c;
- int err;
- char tmpbuf[TMPBUFLEN];
-
- if (!info || !info->screen_base)
- return -ENODEV;
-
- if (p > info->fix.smem_len)
- return -ENOSPC;
- if (count >= info->fix.smem_len)
- count = info->fix.smem_len;
- err = 0;
- if (count + p > info->fix.smem_len) {
- count = info->fix.smem_len - p;
- err = -ENOSPC;
- }
-
- p += (unsigned long)info->screen_base;
- c = count;
- while (c) {
- int len = c > sizeof(tmpbuf) ? sizeof(tmpbuf) : c;
- err = -EFAULT;
- if (copy_from_user(&tmpbuf, buf, len))
- break;
- memcpy_toio(p, &tmpbuf, len);
- c -= len;
- p += len;
- buf += len;
- *ppos += len;
- }
- if (count-c)
- return (count-c);
- return err;
-}
-
static int
stifb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp, struct fb_info *info)
@@ -1137,8 +1060,6 @@
static struct fb_ops stifb_ops = {
.owner = THIS_MODULE,
- .fb_read = stifb_read,
- .fb_write = stifb_write,
.fb_setcolreg = stifb_setcolreg,
.fb_blank = stifb_blank,
.fb_fillrect = cfb_fillrect,
@@ -1162,7 +1083,7 @@
char *dev_name;
int bpp, xres, yres;
- fb = kmalloc(sizeof(*fb), GFP_ATOMIC);
+ fb = kzalloc(sizeof(*fb), GFP_ATOMIC);
if (!fb) {
printk(KERN_ERR "stifb: Could not allocate stifb structure\n");
return -ENODEV;
@@ -1171,7 +1092,6 @@
info = &fb->info;
/* set struct to a known state */
- memset(fb, 0, sizeof(*fb));
fix = &info->fix;
var = &info->var;
@@ -1234,7 +1154,7 @@
case S9000_ID_TOMCAT: /* Dual CRX, behaves else like a CRX */
/* FIXME: TomCat supports two heads:
* fb.iobase = REGION_BASE(fb_info,3);
- * fb.screen_base = (void*) REGION_BASE(fb_info,2);
+ * fb.screen_base = ioremap_nocache(REGION_BASE(fb_info,2),xxx);
* for now we only support the left one ! */
xres = fb->ngle_rom.x_size_visible;
yres = fb->ngle_rom.y_size_visible;
@@ -1327,7 +1247,8 @@
strcpy(fix->id, "stifb");
info->fbops = &stifb_ops;
- info->screen_base = (void*) REGION_BASE(fb,1);
+ info->screen_base = ioremap_nocache(REGION_BASE(fb,1), fix->smem_len);
+ info->screen_size = fix->smem_len;
info->flags = FBINFO_DEFAULT;
info->pseudo_palette = &fb->pseudo_palette;
@@ -1457,7 +1378,7 @@
int i;
if (!options || !*options)
- return 0;
+ return 1;
if (strncmp(options, "off", 3) == 0) {
stifb_disabled = 1;
@@ -1472,7 +1393,7 @@
stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
}
}
- return 0;
+ return 1;
}
__setup("stifb=", stifb_setup);
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index f6e24ee..5fc86ea 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -4,8 +4,9 @@
* Frame Buffer Device for ATI Imageon w100 (Wallaby)
*
* Copyright (C) 2002, ATI Corp.
- * Copyright (C) 2004-2005 Richard Purdie
+ * Copyright (C) 2004-2006 Richard Purdie
* Copyright (c) 2005 Ian Molton
+ * Copyright (c) 2006 Alberto Mardegan
*
* Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
*
@@ -14,6 +15,9 @@
*
* w32xx support by Ian Molton
*
+ * Hardware acceleration support by Alberto Mardegan
+ * <mardy@users.sourceforge.net>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -47,6 +51,7 @@
static void w100_update_enable(void);
static void w100_update_disable(void);
static void calc_hsync(struct w100fb_par *par);
+static void w100_init_graphic_engine(struct w100fb_par *par);
struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
/* Pseudo palette size */
@@ -248,6 +253,152 @@
}
+static void w100_fifo_wait(int entries)
+{
+ union rbbm_status_u status;
+ int i;
+
+ for (i = 0; i < 2000000; i++) {
+ status.val = readl(remapped_regs + mmRBBM_STATUS);
+ if (status.f.cmdfifo_avail >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "w100fb: FIFO Timeout!\n");
+}
+
+
+static int w100fb_sync(struct fb_info *info)
+{
+ union rbbm_status_u status;
+ int i;
+
+ for (i = 0; i < 2000000; i++) {
+ status.val = readl(remapped_regs + mmRBBM_STATUS);
+ if (!status.f.gui_active)
+ return 0;
+ udelay(1);
+ }
+ printk(KERN_ERR "w100fb: Graphic engine timeout!\n");
+ return -EBUSY;
+}
+
+
+static void w100_init_graphic_engine(struct w100fb_par *par)
+{
+ union dp_gui_master_cntl_u gmc;
+ union dp_mix_u dp_mix;
+ union dp_datatype_u dp_datatype;
+ union dp_cntl_u dp_cntl;
+
+ w100_fifo_wait(4);
+ writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET);
+ writel(par->xres, remapped_regs + mmDST_PITCH);
+ writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET);
+ writel(par->xres, remapped_regs + mmSRC_PITCH);
+
+ w100_fifo_wait(3);
+ writel(0, remapped_regs + mmSC_TOP_LEFT);
+ writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT);
+ writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT);
+
+ w100_fifo_wait(4);
+ dp_cntl.val = 0;
+ dp_cntl.f.dst_x_dir = 1;
+ dp_cntl.f.dst_y_dir = 1;
+ dp_cntl.f.src_x_dir = 1;
+ dp_cntl.f.src_y_dir = 1;
+ dp_cntl.f.dst_major_x = 1;
+ dp_cntl.f.src_major_x = 1;
+ writel(dp_cntl.val, remapped_regs + mmDP_CNTL);
+
+ gmc.val = 0;
+ gmc.f.gmc_src_pitch_offset_cntl = 1;
+ gmc.f.gmc_dst_pitch_offset_cntl = 1;
+ gmc.f.gmc_src_clipping = 1;
+ gmc.f.gmc_dst_clipping = 1;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+ gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */
+ gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST;
+ gmc.f.gmc_byte_pix_order = 1;
+ gmc.f.gmc_default_sel = 0;
+ gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+ gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR;
+ gmc.f.gmc_clr_cmp_fcn_dis = 1;
+ gmc.f.gmc_wr_msk_dis = 1;
+ gmc.f.gmc_dp_op = DP_OP_ROP;
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+ dp_datatype.val = dp_mix.val = 0;
+ dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype;
+ dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype;
+ dp_datatype.f.dp_src2_type = 0;
+ dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype;
+ dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype;
+ dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order;
+ writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE);
+
+ dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source;
+ dp_mix.f.dp_src2_source = 1;
+ dp_mix.f.dp_rop3 = gmc.f.gmc_rop3;
+ dp_mix.f.dp_op = gmc.f.gmc_dp_op;
+ writel(dp_mix.val, remapped_regs + mmDP_MIX);
+}
+
+
+static void w100fb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ union dp_gui_master_cntl_u gmc;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+
+ gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+ gmc.f.gmc_rop3 = ROP3_PATCOPY;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR;
+ w100_fifo_wait(2);
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+ writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR);
+
+ w100_fifo_wait(2);
+ writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X);
+ writel((rect->width << 16) | (rect->height & 0xffff),
+ remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
+static void w100fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
+ u32 h = area->height, w = area->width;
+ union dp_gui_master_cntl_u gmc;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ cfb_copyarea(info, area);
+ return;
+ }
+
+ gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+ gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+ w100_fifo_wait(1);
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+ w100_fifo_wait(3);
+ writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X);
+ writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X);
+ writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
/*
* Change the resolution by calling the appropriate hardware functions
*/
@@ -265,6 +416,7 @@
w100_init_lcd(par);
w100_set_dispregs(par);
w100_update_enable();
+ w100_init_graphic_engine(par);
calc_hsync(par);
@@ -394,9 +546,10 @@
.fb_set_par = w100fb_set_par,
.fb_setcolreg = w100fb_setcolreg,
.fb_blank = w100fb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
+ .fb_fillrect = w100fb_fillrect,
+ .fb_copyarea = w100fb_copyarea,
.fb_imageblit = cfb_imageblit,
+ .fb_sync = w100fb_sync,
};
#ifdef CONFIG_PM
@@ -543,7 +696,8 @@
}
info->fbops = &w100fb_ops;
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_FILLRECT;
info->node = -1;
info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
info->screen_size = REMAPPED_FB_LEN;
diff --git a/drivers/video/w100fb.h b/drivers/video/w100fb.h
index 7a58a1e..fffae7b 100644
--- a/drivers/video/w100fb.h
+++ b/drivers/video/w100fb.h
@@ -122,15 +122,32 @@
/* Block DISPLAY End: */
/* Block GFX Start: */
+#define mmDST_OFFSET 0x1004
+#define mmDST_PITCH 0x1008
+#define mmDST_Y_X 0x1038
+#define mmDST_WIDTH_HEIGHT 0x1198
+#define mmDP_GUI_MASTER_CNTL 0x106C
#define mmBRUSH_OFFSET 0x108C
#define mmBRUSH_Y_X 0x1074
+#define mmDP_BRUSH_FRGD_CLR 0x107C
+#define mmSRC_OFFSET 0x11AC
+#define mmSRC_PITCH 0x11B0
+#define mmSRC_Y_X 0x1034
#define mmDEFAULT_PITCH_OFFSET 0x10A0
#define mmDEFAULT_SC_BOTTOM_RIGHT 0x10A8
#define mmDEFAULT2_SC_BOTTOM_RIGHT 0x10AC
+#define mmSC_TOP_LEFT 0x11BC
+#define mmSC_BOTTOM_RIGHT 0x11C0
+#define mmSRC_SC_BOTTOM_RIGHT 0x11C4
#define mmGLOBAL_ALPHA 0x1210
#define mmFILTER_COEF 0x1214
#define mmMVC_CNTL_START 0x11E0
#define mmE2_ARITHMETIC_CNTL 0x1220
+#define mmDP_CNTL 0x11C8
+#define mmDP_CNTL_DST_DIR 0x11CC
+#define mmDP_DATATYPE 0x12C4
+#define mmDP_MIX 0x12C8
+#define mmDP_WRITE_MSK 0x12CC
#define mmENG_CNTL 0x13E8
#define mmENG_PERF_CNT 0x13F0
/* Block GFX End: */
@@ -179,6 +196,7 @@
/* Block RBBM Start: */
#define mmWAIT_UNTIL 0x1400
#define mmISYNC_CNTL 0x1404
+#define mmRBBM_STATUS 0x0140
#define mmRBBM_CNTL 0x0144
#define mmNQWAIT_UNTIL 0x0150
/* Block RBBM End: */
@@ -225,147 +243,147 @@
/* Register structure definitions */
struct wrap_top_dir_t {
- unsigned long top_addr : 23;
- unsigned long : 9;
+ u32 top_addr : 23;
+ u32 : 9;
} __attribute__((packed));
union wrap_top_dir_u {
- unsigned long val : 32;
+ u32 val : 32;
struct wrap_top_dir_t f;
} __attribute__((packed));
struct wrap_start_dir_t {
- unsigned long start_addr : 23;
- unsigned long : 9;
+ u32 start_addr : 23;
+ u32 : 9;
} __attribute__((packed));
union wrap_start_dir_u {
- unsigned long val : 32;
+ u32 val : 32;
struct wrap_start_dir_t f;
} __attribute__((packed));
struct cif_cntl_t {
- unsigned long swap_reg : 2;
- unsigned long swap_fbuf_1 : 2;
- unsigned long swap_fbuf_2 : 2;
- unsigned long swap_fbuf_3 : 2;
- unsigned long pmi_int_disable : 1;
- unsigned long pmi_schmen_disable : 1;
- unsigned long intb_oe : 1;
- unsigned long en_wait_to_compensate_dq_prop_dly : 1;
- unsigned long compensate_wait_rd_size : 2;
- unsigned long wait_asserted_timeout_val : 2;
- unsigned long wait_masked_val : 2;
- unsigned long en_wait_timeout : 1;
- unsigned long en_one_clk_setup_before_wait : 1;
- unsigned long interrupt_active_high : 1;
- unsigned long en_overwrite_straps : 1;
- unsigned long strap_wait_active_hi : 1;
- unsigned long lat_busy_count : 2;
- unsigned long lat_rd_pm4_sclk_busy : 1;
- unsigned long dis_system_bits : 1;
- unsigned long dis_mr : 1;
- unsigned long cif_spare_1 : 4;
+ u32 swap_reg : 2;
+ u32 swap_fbuf_1 : 2;
+ u32 swap_fbuf_2 : 2;
+ u32 swap_fbuf_3 : 2;
+ u32 pmi_int_disable : 1;
+ u32 pmi_schmen_disable : 1;
+ u32 intb_oe : 1;
+ u32 en_wait_to_compensate_dq_prop_dly : 1;
+ u32 compensate_wait_rd_size : 2;
+ u32 wait_asserted_timeout_val : 2;
+ u32 wait_masked_val : 2;
+ u32 en_wait_timeout : 1;
+ u32 en_one_clk_setup_before_wait : 1;
+ u32 interrupt_active_high : 1;
+ u32 en_overwrite_straps : 1;
+ u32 strap_wait_active_hi : 1;
+ u32 lat_busy_count : 2;
+ u32 lat_rd_pm4_sclk_busy : 1;
+ u32 dis_system_bits : 1;
+ u32 dis_mr : 1;
+ u32 cif_spare_1 : 4;
} __attribute__((packed));
union cif_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_cntl_t f;
} __attribute__((packed));
struct cfgreg_base_t {
- unsigned long cfgreg_base : 24;
- unsigned long : 8;
+ u32 cfgreg_base : 24;
+ u32 : 8;
} __attribute__((packed));
union cfgreg_base_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cfgreg_base_t f;
} __attribute__((packed));
struct cif_io_t {
- unsigned long dq_srp : 1;
- unsigned long dq_srn : 1;
- unsigned long dq_sp : 4;
- unsigned long dq_sn : 4;
- unsigned long waitb_srp : 1;
- unsigned long waitb_srn : 1;
- unsigned long waitb_sp : 4;
- unsigned long waitb_sn : 4;
- unsigned long intb_srp : 1;
- unsigned long intb_srn : 1;
- unsigned long intb_sp : 4;
- unsigned long intb_sn : 4;
- unsigned long : 2;
+ u32 dq_srp : 1;
+ u32 dq_srn : 1;
+ u32 dq_sp : 4;
+ u32 dq_sn : 4;
+ u32 waitb_srp : 1;
+ u32 waitb_srn : 1;
+ u32 waitb_sp : 4;
+ u32 waitb_sn : 4;
+ u32 intb_srp : 1;
+ u32 intb_srn : 1;
+ u32 intb_sp : 4;
+ u32 intb_sn : 4;
+ u32 : 2;
} __attribute__((packed));
union cif_io_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_io_t f;
} __attribute__((packed));
struct cif_read_dbg_t {
- unsigned long unpacker_pre_fetch_trig_gen : 2;
- unsigned long dly_second_rd_fetch_trig : 1;
- unsigned long rst_rd_burst_id : 1;
- unsigned long dis_rd_burst_id : 1;
- unsigned long en_block_rd_when_packer_is_not_emp : 1;
- unsigned long dis_pre_fetch_cntl_sm : 1;
- unsigned long rbbm_chrncy_dis : 1;
- unsigned long rbbm_rd_after_wr_lat : 2;
- unsigned long dis_be_during_rd : 1;
- unsigned long one_clk_invalidate_pulse : 1;
- unsigned long dis_chnl_priority : 1;
- unsigned long rst_read_path_a_pls : 1;
- unsigned long rst_read_path_b_pls : 1;
- unsigned long dis_reg_rd_fetch_trig : 1;
- unsigned long dis_rd_fetch_trig_from_ind_addr : 1;
- unsigned long dis_rd_same_byte_to_trig_fetch : 1;
- unsigned long dis_dir_wrap : 1;
- unsigned long dis_ring_buf_to_force_dec : 1;
- unsigned long dis_addr_comp_in_16bit : 1;
- unsigned long clr_w : 1;
- unsigned long err_rd_tag_is_3 : 1;
- unsigned long err_load_when_ful_a : 1;
- unsigned long err_load_when_ful_b : 1;
- unsigned long : 7;
+ u32 unpacker_pre_fetch_trig_gen : 2;
+ u32 dly_second_rd_fetch_trig : 1;
+ u32 rst_rd_burst_id : 1;
+ u32 dis_rd_burst_id : 1;
+ u32 en_block_rd_when_packer_is_not_emp : 1;
+ u32 dis_pre_fetch_cntl_sm : 1;
+ u32 rbbm_chrncy_dis : 1;
+ u32 rbbm_rd_after_wr_lat : 2;
+ u32 dis_be_during_rd : 1;
+ u32 one_clk_invalidate_pulse : 1;
+ u32 dis_chnl_priority : 1;
+ u32 rst_read_path_a_pls : 1;
+ u32 rst_read_path_b_pls : 1;
+ u32 dis_reg_rd_fetch_trig : 1;
+ u32 dis_rd_fetch_trig_from_ind_addr : 1;
+ u32 dis_rd_same_byte_to_trig_fetch : 1;
+ u32 dis_dir_wrap : 1;
+ u32 dis_ring_buf_to_force_dec : 1;
+ u32 dis_addr_comp_in_16bit : 1;
+ u32 clr_w : 1;
+ u32 err_rd_tag_is_3 : 1;
+ u32 err_load_when_ful_a : 1;
+ u32 err_load_when_ful_b : 1;
+ u32 : 7;
} __attribute__((packed));
union cif_read_dbg_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_read_dbg_t f;
} __attribute__((packed));
struct cif_write_dbg_t {
- unsigned long packer_timeout_count : 2;
- unsigned long en_upper_load_cond : 1;
- unsigned long en_chnl_change_cond : 1;
- unsigned long dis_addr_comp_cond : 1;
- unsigned long dis_load_same_byte_addr_cond : 1;
- unsigned long dis_timeout_cond : 1;
- unsigned long dis_timeout_during_rbbm : 1;
- unsigned long dis_packer_ful_during_rbbm_timeout : 1;
- unsigned long en_dword_split_to_rbbm : 1;
- unsigned long en_dummy_val : 1;
- unsigned long dummy_val_sel : 1;
- unsigned long mask_pm4_wrptr_dec : 1;
- unsigned long dis_mc_clean_cond : 1;
- unsigned long err_two_reqi_during_ful : 1;
- unsigned long err_reqi_during_idle_clk : 1;
- unsigned long err_global : 1;
- unsigned long en_wr_buf_dbg_load : 1;
- unsigned long en_wr_buf_dbg_path : 1;
- unsigned long sel_wr_buf_byte : 3;
- unsigned long dis_rd_flush_wr : 1;
- unsigned long dis_packer_ful_cond : 1;
- unsigned long dis_invalidate_by_ops_chnl : 1;
- unsigned long en_halt_when_reqi_err : 1;
- unsigned long cif_spare_2 : 5;
- unsigned long : 1;
+ u32 packer_timeout_count : 2;
+ u32 en_upper_load_cond : 1;
+ u32 en_chnl_change_cond : 1;
+ u32 dis_addr_comp_cond : 1;
+ u32 dis_load_same_byte_addr_cond : 1;
+ u32 dis_timeout_cond : 1;
+ u32 dis_timeout_during_rbbm : 1;
+ u32 dis_packer_ful_during_rbbm_timeout : 1;
+ u32 en_dword_split_to_rbbm : 1;
+ u32 en_dummy_val : 1;
+ u32 dummy_val_sel : 1;
+ u32 mask_pm4_wrptr_dec : 1;
+ u32 dis_mc_clean_cond : 1;
+ u32 err_two_reqi_during_ful : 1;
+ u32 err_reqi_during_idle_clk : 1;
+ u32 err_global : 1;
+ u32 en_wr_buf_dbg_load : 1;
+ u32 en_wr_buf_dbg_path : 1;
+ u32 sel_wr_buf_byte : 3;
+ u32 dis_rd_flush_wr : 1;
+ u32 dis_packer_ful_cond : 1;
+ u32 dis_invalidate_by_ops_chnl : 1;
+ u32 en_halt_when_reqi_err : 1;
+ u32 cif_spare_2 : 5;
+ u32 : 1;
} __attribute__((packed));
union cif_write_dbg_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_write_dbg_t f;
} __attribute__((packed));
@@ -403,327 +421,327 @@
} __attribute__((packed));
struct crtc_total_t {
- unsigned long crtc_h_total : 10;
- unsigned long : 6;
- unsigned long crtc_v_total : 10;
- unsigned long : 6;
+ u32 crtc_h_total : 10;
+ u32 : 6;
+ u32 crtc_v_total : 10;
+ u32 : 6;
} __attribute__((packed));
union crtc_total_u {
- unsigned long val : 32;
+ u32 val : 32;
struct crtc_total_t f;
} __attribute__((packed));
struct crtc_ss_t {
- unsigned long ss_start : 10;
- unsigned long : 6;
- unsigned long ss_end : 10;
- unsigned long : 2;
- unsigned long ss_align : 1;
- unsigned long ss_pol : 1;
- unsigned long ss_run_mode : 1;
- unsigned long ss_en : 1;
+ u32 ss_start : 10;
+ u32 : 6;
+ u32 ss_end : 10;
+ u32 : 2;
+ u32 ss_align : 1;
+ u32 ss_pol : 1;
+ u32 ss_run_mode : 1;
+ u32 ss_en : 1;
} __attribute__((packed));
union crtc_ss_u {
- unsigned long val : 32;
+ u32 val : 32;
struct crtc_ss_t f;
} __attribute__((packed));
struct active_h_disp_t {
- unsigned long active_h_start : 10;
- unsigned long : 6;
- unsigned long active_h_end : 10;
- unsigned long : 6;
+ u32 active_h_start : 10;
+ u32 : 6;
+ u32 active_h_end : 10;
+ u32 : 6;
} __attribute__((packed));
union active_h_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct active_h_disp_t f;
} __attribute__((packed));
struct active_v_disp_t {
- unsigned long active_v_start : 10;
- unsigned long : 6;
- unsigned long active_v_end : 10;
- unsigned long : 6;
+ u32 active_v_start : 10;
+ u32 : 6;
+ u32 active_v_end : 10;
+ u32 : 6;
} __attribute__((packed));
union active_v_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct active_v_disp_t f;
} __attribute__((packed));
struct graphic_h_disp_t {
- unsigned long graphic_h_start : 10;
- unsigned long : 6;
- unsigned long graphic_h_end : 10;
- unsigned long : 6;
+ u32 graphic_h_start : 10;
+ u32 : 6;
+ u32 graphic_h_end : 10;
+ u32 : 6;
} __attribute__((packed));
union graphic_h_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_h_disp_t f;
} __attribute__((packed));
struct graphic_v_disp_t {
- unsigned long graphic_v_start : 10;
- unsigned long : 6;
- unsigned long graphic_v_end : 10;
- unsigned long : 6;
+ u32 graphic_v_start : 10;
+ u32 : 6;
+ u32 graphic_v_end : 10;
+ u32 : 6;
} __attribute__((packed));
union graphic_v_disp_u{
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_v_disp_t f;
} __attribute__((packed));
struct graphic_ctrl_t_w100 {
- unsigned long color_depth : 3;
- unsigned long portrait_mode : 2;
- unsigned long low_power_on : 1;
- unsigned long req_freq : 4;
- unsigned long en_crtc : 1;
- unsigned long en_graphic_req : 1;
- unsigned long en_graphic_crtc : 1;
- unsigned long total_req_graphic : 9;
- unsigned long lcd_pclk_on : 1;
- unsigned long lcd_sclk_on : 1;
- unsigned long pclk_running : 1;
- unsigned long sclk_running : 1;
- unsigned long : 6;
+ u32 color_depth : 3;
+ u32 portrait_mode : 2;
+ u32 low_power_on : 1;
+ u32 req_freq : 4;
+ u32 en_crtc : 1;
+ u32 en_graphic_req : 1;
+ u32 en_graphic_crtc : 1;
+ u32 total_req_graphic : 9;
+ u32 lcd_pclk_on : 1;
+ u32 lcd_sclk_on : 1;
+ u32 pclk_running : 1;
+ u32 sclk_running : 1;
+ u32 : 6;
} __attribute__((packed));
struct graphic_ctrl_t_w32xx {
- unsigned long color_depth : 3;
- unsigned long portrait_mode : 2;
- unsigned long low_power_on : 1;
- unsigned long req_freq : 4;
- unsigned long en_crtc : 1;
- unsigned long en_graphic_req : 1;
- unsigned long en_graphic_crtc : 1;
- unsigned long total_req_graphic : 10;
- unsigned long lcd_pclk_on : 1;
- unsigned long lcd_sclk_on : 1;
- unsigned long pclk_running : 1;
- unsigned long sclk_running : 1;
- unsigned long : 5;
+ u32 color_depth : 3;
+ u32 portrait_mode : 2;
+ u32 low_power_on : 1;
+ u32 req_freq : 4;
+ u32 en_crtc : 1;
+ u32 en_graphic_req : 1;
+ u32 en_graphic_crtc : 1;
+ u32 total_req_graphic : 10;
+ u32 lcd_pclk_on : 1;
+ u32 lcd_sclk_on : 1;
+ u32 pclk_running : 1;
+ u32 sclk_running : 1;
+ u32 : 5;
} __attribute__((packed));
union graphic_ctrl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_ctrl_t_w100 f_w100;
struct graphic_ctrl_t_w32xx f_w32xx;
} __attribute__((packed));
struct video_ctrl_t {
- unsigned long video_mode : 1;
- unsigned long keyer_en : 1;
- unsigned long en_video_req : 1;
- unsigned long en_graphic_req_video : 1;
- unsigned long en_video_crtc : 1;
- unsigned long video_hor_exp : 2;
- unsigned long video_ver_exp : 2;
- unsigned long uv_combine : 1;
- unsigned long total_req_video : 9;
- unsigned long video_ch_sel : 1;
- unsigned long video_portrait : 2;
- unsigned long yuv2rgb_en : 1;
- unsigned long yuv2rgb_option : 1;
- unsigned long video_inv_hor : 1;
- unsigned long video_inv_ver : 1;
- unsigned long gamma_sel : 2;
- unsigned long dis_limit : 1;
- unsigned long en_uv_hblend : 1;
- unsigned long rgb_gamma_sel : 2;
+ u32 video_mode : 1;
+ u32 keyer_en : 1;
+ u32 en_video_req : 1;
+ u32 en_graphic_req_video : 1;
+ u32 en_video_crtc : 1;
+ u32 video_hor_exp : 2;
+ u32 video_ver_exp : 2;
+ u32 uv_combine : 1;
+ u32 total_req_video : 9;
+ u32 video_ch_sel : 1;
+ u32 video_portrait : 2;
+ u32 yuv2rgb_en : 1;
+ u32 yuv2rgb_option : 1;
+ u32 video_inv_hor : 1;
+ u32 video_inv_ver : 1;
+ u32 gamma_sel : 2;
+ u32 dis_limit : 1;
+ u32 en_uv_hblend : 1;
+ u32 rgb_gamma_sel : 2;
} __attribute__((packed));
union video_ctrl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct video_ctrl_t f;
} __attribute__((packed));
struct disp_db_buf_cntl_rd_t {
- unsigned long en_db_buf : 1;
- unsigned long update_db_buf_done : 1;
- unsigned long db_buf_cntl : 6;
- unsigned long : 24;
+ u32 en_db_buf : 1;
+ u32 update_db_buf_done : 1;
+ u32 db_buf_cntl : 6;
+ u32 : 24;
} __attribute__((packed));
union disp_db_buf_cntl_rd_u {
- unsigned long val : 32;
+ u32 val : 32;
struct disp_db_buf_cntl_rd_t f;
} __attribute__((packed));
struct disp_db_buf_cntl_wr_t {
- unsigned long en_db_buf : 1;
- unsigned long update_db_buf : 1;
- unsigned long db_buf_cntl : 6;
- unsigned long : 24;
+ u32 en_db_buf : 1;
+ u32 update_db_buf : 1;
+ u32 db_buf_cntl : 6;
+ u32 : 24;
} __attribute__((packed));
union disp_db_buf_cntl_wr_u {
- unsigned long val : 32;
+ u32 val : 32;
struct disp_db_buf_cntl_wr_t f;
} __attribute__((packed));
struct gamma_value1_t {
- unsigned long gamma1 : 8;
- unsigned long gamma2 : 8;
- unsigned long gamma3 : 8;
- unsigned long gamma4 : 8;
+ u32 gamma1 : 8;
+ u32 gamma2 : 8;
+ u32 gamma3 : 8;
+ u32 gamma4 : 8;
} __attribute__((packed));
union gamma_value1_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_value1_t f;
} __attribute__((packed));
struct gamma_value2_t {
- unsigned long gamma5 : 8;
- unsigned long gamma6 : 8;
- unsigned long gamma7 : 8;
- unsigned long gamma8 : 8;
+ u32 gamma5 : 8;
+ u32 gamma6 : 8;
+ u32 gamma7 : 8;
+ u32 gamma8 : 8;
} __attribute__((packed));
union gamma_value2_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_value2_t f;
} __attribute__((packed));
struct gamma_slope_t {
- unsigned long slope1 : 3;
- unsigned long slope2 : 3;
- unsigned long slope3 : 3;
- unsigned long slope4 : 3;
- unsigned long slope5 : 3;
- unsigned long slope6 : 3;
- unsigned long slope7 : 3;
- unsigned long slope8 : 3;
- unsigned long : 8;
+ u32 slope1 : 3;
+ u32 slope2 : 3;
+ u32 slope3 : 3;
+ u32 slope4 : 3;
+ u32 slope5 : 3;
+ u32 slope6 : 3;
+ u32 slope7 : 3;
+ u32 slope8 : 3;
+ u32 : 8;
} __attribute__((packed));
union gamma_slope_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_slope_t f;
} __attribute__((packed));
struct mc_ext_mem_location_t {
- unsigned long mc_ext_mem_start : 16;
- unsigned long mc_ext_mem_top : 16;
+ u32 mc_ext_mem_start : 16;
+ u32 mc_ext_mem_top : 16;
} __attribute__((packed));
union mc_ext_mem_location_u {
- unsigned long val : 32;
+ u32 val : 32;
struct mc_ext_mem_location_t f;
} __attribute__((packed));
struct mc_fb_location_t {
- unsigned long mc_fb_start : 16;
- unsigned long mc_fb_top : 16;
+ u32 mc_fb_start : 16;
+ u32 mc_fb_top : 16;
} __attribute__((packed));
union mc_fb_location_u {
- unsigned long val : 32;
+ u32 val : 32;
struct mc_fb_location_t f;
} __attribute__((packed));
struct clk_pin_cntl_t {
- unsigned long osc_en : 1;
- unsigned long osc_gain : 5;
- unsigned long dont_use_xtalin : 1;
- unsigned long xtalin_pm_en : 1;
- unsigned long xtalin_dbl_en : 1;
- unsigned long : 7;
- unsigned long cg_debug : 16;
+ u32 osc_en : 1;
+ u32 osc_gain : 5;
+ u32 dont_use_xtalin : 1;
+ u32 xtalin_pm_en : 1;
+ u32 xtalin_dbl_en : 1;
+ u32 : 7;
+ u32 cg_debug : 16;
} __attribute__((packed));
union clk_pin_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct clk_pin_cntl_t f;
} __attribute__((packed));
struct pll_ref_fb_div_t {
- unsigned long pll_ref_div : 4;
- unsigned long : 4;
- unsigned long pll_fb_div_int : 6;
- unsigned long : 2;
- unsigned long pll_fb_div_frac : 3;
- unsigned long : 1;
- unsigned long pll_reset_time : 4;
- unsigned long pll_lock_time : 8;
+ u32 pll_ref_div : 4;
+ u32 : 4;
+ u32 pll_fb_div_int : 6;
+ u32 : 2;
+ u32 pll_fb_div_frac : 3;
+ u32 : 1;
+ u32 pll_reset_time : 4;
+ u32 pll_lock_time : 8;
} __attribute__((packed));
union pll_ref_fb_div_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pll_ref_fb_div_t f;
} __attribute__((packed));
struct pll_cntl_t {
- unsigned long pll_pwdn : 1;
- unsigned long pll_reset : 1;
- unsigned long pll_pm_en : 1;
- unsigned long pll_mode : 1;
- unsigned long pll_refclk_sel : 1;
- unsigned long pll_fbclk_sel : 1;
- unsigned long pll_tcpoff : 1;
- unsigned long pll_pcp : 3;
- unsigned long pll_pvg : 3;
- unsigned long pll_vcofr : 1;
- unsigned long pll_ioffset : 2;
- unsigned long pll_pecc_mode : 2;
- unsigned long pll_pecc_scon : 2;
- unsigned long pll_dactal : 4;
- unsigned long pll_cp_clip : 2;
- unsigned long pll_conf : 3;
- unsigned long pll_mbctrl : 2;
- unsigned long pll_ring_off : 1;
+ u32 pll_pwdn : 1;
+ u32 pll_reset : 1;
+ u32 pll_pm_en : 1;
+ u32 pll_mode : 1;
+ u32 pll_refclk_sel : 1;
+ u32 pll_fbclk_sel : 1;
+ u32 pll_tcpoff : 1;
+ u32 pll_pcp : 3;
+ u32 pll_pvg : 3;
+ u32 pll_vcofr : 1;
+ u32 pll_ioffset : 2;
+ u32 pll_pecc_mode : 2;
+ u32 pll_pecc_scon : 2;
+ u32 pll_dactal : 4;
+ u32 pll_cp_clip : 2;
+ u32 pll_conf : 3;
+ u32 pll_mbctrl : 2;
+ u32 pll_ring_off : 1;
} __attribute__((packed));
union pll_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pll_cntl_t f;
} __attribute__((packed));
struct sclk_cntl_t {
- unsigned long sclk_src_sel : 2;
- unsigned long : 2;
- unsigned long sclk_post_div_fast : 4;
- unsigned long sclk_clkon_hys : 3;
- unsigned long sclk_post_div_slow : 4;
- unsigned long disp_cg_ok2switch_en : 1;
- unsigned long sclk_force_reg : 1;
- unsigned long sclk_force_disp : 1;
- unsigned long sclk_force_mc : 1;
- unsigned long sclk_force_extmc : 1;
- unsigned long sclk_force_cp : 1;
- unsigned long sclk_force_e2 : 1;
- unsigned long sclk_force_e3 : 1;
- unsigned long sclk_force_idct : 1;
- unsigned long sclk_force_bist : 1;
- unsigned long busy_extend_cp : 1;
- unsigned long busy_extend_e2 : 1;
- unsigned long busy_extend_e3 : 1;
- unsigned long busy_extend_idct : 1;
- unsigned long : 3;
+ u32 sclk_src_sel : 2;
+ u32 : 2;
+ u32 sclk_post_div_fast : 4;
+ u32 sclk_clkon_hys : 3;
+ u32 sclk_post_div_slow : 4;
+ u32 disp_cg_ok2switch_en : 1;
+ u32 sclk_force_reg : 1;
+ u32 sclk_force_disp : 1;
+ u32 sclk_force_mc : 1;
+ u32 sclk_force_extmc : 1;
+ u32 sclk_force_cp : 1;
+ u32 sclk_force_e2 : 1;
+ u32 sclk_force_e3 : 1;
+ u32 sclk_force_idct : 1;
+ u32 sclk_force_bist : 1;
+ u32 busy_extend_cp : 1;
+ u32 busy_extend_e2 : 1;
+ u32 busy_extend_e3 : 1;
+ u32 busy_extend_idct : 1;
+ u32 : 3;
} __attribute__((packed));
union sclk_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct sclk_cntl_t f;
} __attribute__((packed));
struct pclk_cntl_t {
- unsigned long pclk_src_sel : 2;
- unsigned long : 2;
- unsigned long pclk_post_div : 4;
- unsigned long : 8;
- unsigned long pclk_force_disp : 1;
- unsigned long : 15;
+ u32 pclk_src_sel : 2;
+ u32 : 2;
+ u32 pclk_post_div : 4;
+ u32 : 8;
+ u32 pclk_force_disp : 1;
+ u32 : 15;
} __attribute__((packed));
union pclk_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pclk_cntl_t f;
} __attribute__((packed));
@@ -735,36 +753,176 @@
#define TESTCLK_SRC_XTAL 0x06
struct clk_test_cntl_t {
- unsigned long testclk_sel : 4;
- unsigned long : 3;
- unsigned long start_check_freq : 1;
- unsigned long tstcount_rst : 1;
- unsigned long : 15;
- unsigned long test_count : 8;
+ u32 testclk_sel : 4;
+ u32 : 3;
+ u32 start_check_freq : 1;
+ u32 tstcount_rst : 1;
+ u32 : 15;
+ u32 test_count : 8;
} __attribute__((packed));
union clk_test_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct clk_test_cntl_t f;
} __attribute__((packed));
struct pwrmgt_cntl_t {
- unsigned long pwm_enable : 1;
- unsigned long : 1;
- unsigned long pwm_mode_req : 2;
- unsigned long pwm_wakeup_cond : 2;
- unsigned long pwm_fast_noml_hw_en : 1;
- unsigned long pwm_noml_fast_hw_en : 1;
- unsigned long pwm_fast_noml_cond : 4;
- unsigned long pwm_noml_fast_cond : 4;
- unsigned long pwm_idle_timer : 8;
- unsigned long pwm_busy_timer : 8;
+ u32 pwm_enable : 1;
+ u32 : 1;
+ u32 pwm_mode_req : 2;
+ u32 pwm_wakeup_cond : 2;
+ u32 pwm_fast_noml_hw_en : 1;
+ u32 pwm_noml_fast_hw_en : 1;
+ u32 pwm_fast_noml_cond : 4;
+ u32 pwm_noml_fast_cond : 4;
+ u32 pwm_idle_timer : 8;
+ u32 pwm_busy_timer : 8;
} __attribute__((packed));
union pwrmgt_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pwrmgt_cntl_t f;
} __attribute__((packed));
+#define SRC_DATATYPE_EQU_DST 3
+
+#define ROP3_SRCCOPY 0xcc
+#define ROP3_PATCOPY 0xf0
+
+#define GMC_BRUSH_SOLID_COLOR 13
+#define GMC_BRUSH_NONE 15
+
+#define DP_SRC_MEM_RECTANGULAR 2
+
+#define DP_OP_ROP 0
+
+struct dp_gui_master_cntl_t {
+ u32 gmc_src_pitch_offset_cntl : 1;
+ u32 gmc_dst_pitch_offset_cntl : 1;
+ u32 gmc_src_clipping : 1;
+ u32 gmc_dst_clipping : 1;
+ u32 gmc_brush_datatype : 4;
+ u32 gmc_dst_datatype : 4;
+ u32 gmc_src_datatype : 3;
+ u32 gmc_byte_pix_order : 1;
+ u32 gmc_default_sel : 1;
+ u32 gmc_rop3 : 8;
+ u32 gmc_dp_src_source : 3;
+ u32 gmc_clr_cmp_fcn_dis : 1;
+ u32 : 1;
+ u32 gmc_wr_msk_dis : 1;
+ u32 gmc_dp_op : 1;
+} __attribute__((packed));
+
+union dp_gui_master_cntl_u {
+ u32 val : 32;
+ struct dp_gui_master_cntl_t f;
+} __attribute__((packed));
+
+struct rbbm_status_t {
+ u32 cmdfifo_avail : 7;
+ u32 : 1;
+ u32 hirq_on_rbb : 1;
+ u32 cprq_on_rbb : 1;
+ u32 cfrq_on_rbb : 1;
+ u32 hirq_in_rtbuf : 1;
+ u32 cprq_in_rtbuf : 1;
+ u32 cfrq_in_rtbuf : 1;
+ u32 cf_pipe_busy : 1;
+ u32 eng_ev_busy : 1;
+ u32 cp_cmdstrm_busy : 1;
+ u32 e2_busy : 1;
+ u32 rb2d_busy : 1;
+ u32 rb3d_busy : 1;
+ u32 se_busy : 1;
+ u32 re_busy : 1;
+ u32 tam_busy : 1;
+ u32 tdm_busy : 1;
+ u32 pb_busy : 1;
+ u32 : 6;
+ u32 gui_active : 1;
+} __attribute__((packed));
+
+union rbbm_status_u {
+ u32 val : 32;
+ struct rbbm_status_t f;
+} __attribute__((packed));
+
+struct dp_datatype_t {
+ u32 dp_dst_datatype : 4;
+ u32 : 4;
+ u32 dp_brush_datatype : 4;
+ u32 dp_src2_type : 1;
+ u32 dp_src2_datatype : 3;
+ u32 dp_src_datatype : 3;
+ u32 : 11;
+ u32 dp_byte_pix_order : 1;
+ u32 : 1;
+} __attribute__((packed));
+
+union dp_datatype_u {
+ u32 val : 32;
+ struct dp_datatype_t f;
+} __attribute__((packed));
+
+struct dp_mix_t {
+ u32 : 8;
+ u32 dp_src_source : 3;
+ u32 dp_src2_source : 3;
+ u32 : 2;
+ u32 dp_rop3 : 8;
+ u32 dp_op : 1;
+ u32 : 7;
+} __attribute__((packed));
+
+union dp_mix_u {
+ u32 val : 32;
+ struct dp_mix_t f;
+} __attribute__((packed));
+
+struct eng_cntl_t {
+ u32 erc_reg_rd_ws : 1;
+ u32 erc_reg_wr_ws : 1;
+ u32 erc_idle_reg_wr : 1;
+ u32 dis_engine_triggers : 1;
+ u32 dis_rop_src_uses_dst_w_h : 1;
+ u32 dis_src_uses_dst_dirmaj : 1;
+ u32 : 6;
+ u32 force_3dclk_when_2dclk : 1;
+ u32 : 19;
+} __attribute__((packed));
+
+union eng_cntl_u {
+ u32 val : 32;
+ struct eng_cntl_t f;
+} __attribute__((packed));
+
+struct dp_cntl_t {
+ u32 dst_x_dir : 1;
+ u32 dst_y_dir : 1;
+ u32 src_x_dir : 1;
+ u32 src_y_dir : 1;
+ u32 dst_major_x : 1;
+ u32 src_major_x : 1;
+ u32 : 26;
+} __attribute__((packed));
+
+union dp_cntl_u {
+ u32 val : 32;
+ struct dp_cntl_t f;
+} __attribute__((packed));
+
+struct dp_cntl_dst_dir_t {
+ u32 : 15;
+ u32 dst_y_dir : 1;
+ u32 : 15;
+ u32 dst_x_dir : 1;
+} __attribute__((packed));
+
+union dp_cntl_dst_dir_u {
+ u32 val : 32;
+ struct dp_cntl_dst_dir_t f;
+} __attribute__((packed));
+
#endif
diff --git a/fs/Makefile b/fs/Makefile
index 080b386..83bf478 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -10,7 +10,7 @@
ioctl.o readdir.o select.o fifo.o locks.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \
seq_file.o xattr.o libfs.o fs-writeback.o mpage.o direct-io.o \
- ioprio.o pnode.o drop_caches.o
+ ioprio.o pnode.o drop_caches.o splice.o sync.o
obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_EPOLL) += eventpoll.o
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 4e1b849..f3418f7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/devfs_fs_kernel.h>
+#include <linux/seq_file.h>
#include <linux/kobject.h>
#include <linux/kobj_map.h>
@@ -27,8 +28,6 @@
static struct kobj_map *cdev_map;
-#define MAX_PROBE_HASH 255 /* random */
-
static DEFINE_MUTEX(chrdevs_lock);
static struct char_device_struct {
@@ -39,93 +38,29 @@
char name[64];
struct file_operations *fops;
struct cdev *cdev; /* will die */
-} *chrdevs[MAX_PROBE_HASH];
+} *chrdevs[CHRDEV_MAJOR_HASH_SIZE];
/* index in the above */
static inline int major_to_index(int major)
{
- return major % MAX_PROBE_HASH;
+ return major % CHRDEV_MAJOR_HASH_SIZE;
}
-struct chrdev_info {
- int index;
- struct char_device_struct *cd;
-};
+#ifdef CONFIG_PROC_FS
-void *get_next_chrdev(void *dev)
-{
- struct chrdev_info *info;
-
- if (dev == NULL) {
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto out;
- info->index=0;
- info->cd = chrdevs[info->index];
- if (info->cd)
- goto out;
- } else {
- info = dev;
- }
-
- while (info->index < ARRAY_SIZE(chrdevs)) {
- if (info->cd)
- info->cd = info->cd->next;
- if (info->cd)
- goto out;
- /*
- * No devices on this chain, move to the next
- */
- info->index++;
- info->cd = (info->index < ARRAY_SIZE(chrdevs)) ?
- chrdevs[info->index] : NULL;
- if (info->cd)
- goto out;
- }
-
-out:
- return info;
-}
-
-void *acquire_chrdev_list(void)
-{
- mutex_lock(&chrdevs_lock);
- return get_next_chrdev(NULL);
-}
-
-void release_chrdev_list(void *dev)
-{
- mutex_unlock(&chrdevs_lock);
- kfree(dev);
-}
-
-
-int count_chrdev_list(void)
+void chrdev_show(struct seq_file *f, off_t offset)
{
struct char_device_struct *cd;
- int i, count;
- count = 0;
-
- for (i = 0; i < ARRAY_SIZE(chrdevs) ; i++) {
- for (cd = chrdevs[i]; cd; cd = cd->next)
- count++;
+ if (offset < CHRDEV_MAJOR_HASH_SIZE) {
+ mutex_lock(&chrdevs_lock);
+ for (cd = chrdevs[offset]; cd; cd = cd->next)
+ seq_printf(f, "%3d %s\n", cd->major, cd->name);
+ mutex_unlock(&chrdevs_lock);
}
-
- return count;
}
-int get_chrdev_info(void *dev, int *major, char **name)
-{
- struct chrdev_info *info = dev;
-
- if (info->cd == NULL)
- return 1;
-
- *major = info->cd->major;
- *name = info->cd->name;
- return 0;
-}
+#endif /* CONFIG_PROC_FS */
/*
* Register a single major with a specified minor range.
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index cb68efb..8a2de03 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,21 @@
+Version 1.42
+------------
+Fix slow oplock break when mounted to different servers at the same time and
+the tids match and we try to find matching fid on wrong server.
+
+Version 1.41
+------------
+Fix NTLMv2 security (can be enabled in /proc/fs/cifs) so customers can
+configure stronger authentication. Fix sfu symlinks so they can
+be followed (not just recognized). Fix wraparound of bcc on
+read responses when buffer size over 64K and also fix wrap of
+max smb buffer size when CIFSMaxBufSize over 64K. Fix oops in
+cifs_user_read and cifs_readpages (when EAGAIN on send of smb
+on socket is returned over and over). Add POSIX (advisory) byte range
+locking support (requires server with newest CIFS UNIX Extensions
+to the protocol implemented). Slow down negprot slightly in port 139
+RFC1001 case to give session_init time on buggy servers.
+
Version 1.40
------------
Use fsuid (fsgid) more consistently instead of uid (gid). Improve performance
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index 7384947..58c7725 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -3,4 +3,4 @@
#
obj-$(CONFIG_CIFS) += cifs.o
-cifs-objs := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o fcntl.o readdir.o ioctl.o
+cifs-objs := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o fcntl.o readdir.o ioctl.o ntlmssp.o
diff --git a/fs/cifs/README b/fs/cifs/README
index b0070d1..b2b4d08 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -422,6 +422,13 @@
nomapchars Do not translate any of these seven characters (default).
nocase Request case insensitive path name matching (case
sensitive is the default if the server suports it).
+ posixpaths If CIFS Unix extensions are supported, attempt to
+ negotiate posix path name support which allows certain
+ characters forbidden in typical CIFS filenames, without
+ requiring remapping. (default)
+ noposixpaths If CIFS Unix extensions are supported, do not request
+ posix path name support (this may cause servers to
+ reject creatingfile with certain reserved characters).
nobrl Do not send byte range lock requests to the server.
This is necessary for certain applications that break
with cifs style mandatory byte range locks (and most
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index a2c2485..e7d6373 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsencrypt.c
*
- * Copyright (C) International Business Machines Corp., 2005
+ * Copyright (C) International Business Machines Corp., 2005,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -36,7 +36,8 @@
extern void mdfour(unsigned char *out, unsigned char *in, int n);
extern void E_md4hash(const unsigned char *passwd, unsigned char *p16);
-static int cifs_calculate_signature(const struct smb_hdr * cifs_pdu, const char * key, char * signature)
+static int cifs_calculate_signature(const struct smb_hdr * cifs_pdu,
+ const char * key, char * signature)
{
struct MD5Context context;
@@ -56,9 +57,6 @@
int rc = 0;
char smb_signature[20];
- /* BB remember to initialize sequence number elsewhere and initialize mac_signing key elsewhere BB */
- /* BB remember to add code to save expected sequence number in midQ entry BB */
-
if((cifs_pdu == NULL) || (server == NULL))
return -EINVAL;
@@ -85,20 +83,33 @@
static int cifs_calc_signature2(const struct kvec * iov, int n_vec,
const char * key, char * signature)
{
- struct MD5Context context;
+ struct MD5Context context;
+ int i;
- if((iov == NULL) || (signature == NULL))
- return -EINVAL;
+ if((iov == NULL) || (signature == NULL))
+ return -EINVAL;
- MD5Init(&context);
- MD5Update(&context,key,CIFS_SESSION_KEY_SIZE+16);
+ MD5Init(&context);
+ MD5Update(&context,key,CIFS_SESSION_KEY_SIZE+16);
+ for(i=0;i<n_vec;i++) {
+ if(iov[i].iov_base == NULL) {
+ cERROR(1,("null iovec entry"));
+ return -EIO;
+ } else if(iov[i].iov_len == 0)
+ break; /* bail out if we are sent nothing to sign */
+ /* The first entry includes a length field (which does not get
+ signed that occupies the first 4 bytes before the header */
+ if(i==0) {
+ if (iov[0].iov_len <= 8 ) /* cmd field at offset 9 */
+ break; /* nothing to sign or corrupt header */
+ MD5Update(&context,iov[0].iov_base+4, iov[0].iov_len-4);
+ } else
+ MD5Update(&context,iov[i].iov_base, iov[i].iov_len);
+ }
-/* MD5Update(&context,cifs_pdu->Protocol,cifs_pdu->smb_buf_length); */ /* BB FIXME BB */
+ MD5Final(signature,&context);
- MD5Final(signature,&context);
-
- return -EOPNOTSUPP;
-/* return 0; */
+ return 0;
}
@@ -259,4 +270,5 @@
/* hmac_md5_update(v2_session_response+16)client thing,8,&context); */ /* BB fix */
hmac_md5_final(v2_session_response,&context);
+ cifs_dump_mem("v2_sess_rsp: ", v2_session_response, 32); /* BB removeme BB */
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 4bbc544..d4b713e 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -93,13 +93,10 @@
int rc = 0;
sb->s_flags |= MS_NODIRATIME; /* and probably even noatime */
- sb->s_fs_info = kmalloc(sizeof(struct cifs_sb_info),GFP_KERNEL);
+ sb->s_fs_info = kzalloc(sizeof(struct cifs_sb_info),GFP_KERNEL);
cifs_sb = CIFS_SB(sb);
if(cifs_sb == NULL)
return -ENOMEM;
- else
- memset(cifs_sb,0,sizeof(struct cifs_sb_info));
-
rc = cifs_mount(sb, cifs_sb, data, devname);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 74f405ae..4e829dc 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -99,5 +99,5 @@
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern int cifs_ioctl (struct inode * inode, struct file * filep,
unsigned int command, unsigned long arg);
-#define CIFS_VERSION "1.40"
+#define CIFS_VERSION "1.42"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7bed276..006eb33 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsglob.h
*
- * Copyright (C) International Business Machines Corp., 2002,2005
+ * Copyright (C) International Business Machines Corp., 2002,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -430,6 +430,15 @@
#define CIFS_LARGE_BUFFER 2
#define CIFS_IOVEC 4 /* array of response buffers */
+/* Type of session setup needed */
+#define CIFS_PLAINTEXT 0
+#define CIFS_LANMAN 1
+#define CIFS_NTLM 2
+#define CIFS_NTLMSSP_NEG 3
+#define CIFS_NTLMSSP_AUTH 4
+#define CIFS_SPNEGO_INIT 5
+#define CIFS_SPNEGO_TARG 6
+
/*
*****************************************************************
* All constants go here
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index cc24710..b2233ac 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -859,7 +859,10 @@
LOCKING_ANDX_RANGE Locks[1];
} __attribute__((packed)) LOCK_REQ;
-
+/* lock type */
+#define CIFS_RDLCK 0
+#define CIFS_WRLCK 1
+#define CIFS_UNLCK 2
typedef struct cifs_posix_lock {
__le16 lock_type; /* 0 = Read, 1 = Write, 2 = Unlock */
__le16 lock_flags; /* 1 = Wait (only valid for setlock) */
@@ -1786,7 +1789,13 @@
#define CIFS_UNIX_POSIX_ACL_CAP 0x00000002 /* support getfacl/setfacl */
#define CIFS_UNIX_XATTR_CAP 0x00000004 /* support new namespace */
#define CIFS_UNIX_EXTATTR_CAP 0x00000008 /* support chattr/chflag */
-#define CIFS_UNIX_POSIX_PATHNAMES_CAP 0x00000010 /* Use POSIX pathnames on the wire. */
+#define CIFS_UNIX_POSIX_PATHNAMES_CAP 0x00000010 /* Allow POSIX path chars */
+#ifdef CONFIG_CIFS_POSIX
+#define CIFS_UNIX_CAP_MASK 0x0000001b
+#else
+#define CIFS_UNIX_CAP_MASK 0x00000013
+#endif /* CONFIG_CIFS_POSIX */
+
#define CIFS_POSIX_EXTENSIONS 0x00000010 /* support for new QFSInfo */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7b25463..2879ba3 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsproto.h
*
- * Copyright (c) International Business Machines Corp., 2002,2005
+ * Copyright (c) International Business Machines Corp., 2002,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -64,6 +64,14 @@
extern void header_assemble(struct smb_hdr *, char /* command */ ,
const struct cifsTconInfo *, int /* length of
fixed section (word count) in two byte units */);
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+extern int small_smb_init_no_tc(const int smb_cmd, const int wct,
+ struct cifsSesInfo *ses,
+ void ** request_buf);
+extern int CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
+ const int stage, int * pNTLMv2_flg,
+ const struct nls_table *nls_cp);
+#endif
extern __u16 GetNextMid(struct TCP_Server_Info *server);
extern struct oplock_q_entry * AllocOplockQEntry(struct inode *, u16,
struct cifsTconInfo *);
@@ -257,7 +265,10 @@
const __u64 offset, const __u32 numUnlock,
const __u32 numLock, const __u8 lockType,
const int waitFlag);
-
+extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
+ const __u16 smb_file_id, const int get_flag,
+ const __u64 len, const __u64 offset,
+ const __u16 lock_type, const int waitFlag);
extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a243fe2..d705500 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2005
+ * Copyright (C) International Business Machines Corp., 2002,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
@@ -186,7 +186,35 @@
cifs_stats_inc(&tcon->num_smbs_sent);
return rc;
-}
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+int
+small_smb_init_no_tc(const int smb_command, const int wct,
+ struct cifsSesInfo *ses, void **request_buf)
+{
+ int rc;
+ struct smb_hdr * buffer;
+
+ rc = small_smb_init(smb_command, wct, NULL, request_buf);
+ if(rc)
+ return rc;
+
+ buffer = (struct smb_hdr *)*request_buf;
+ buffer->Mid = GetNextMid(ses->server);
+ if (ses->capabilities & CAP_UNICODE)
+ buffer->Flags2 |= SMBFLG2_UNICODE;
+ if (ses->capabilities & CAP_STATUS32)
+ buffer->Flags2 |= SMBFLG2_ERR_STATUS;
+
+ /* uid, tid can stay at zero as set in header assemble */
+
+ /* BB add support for turning on the signing when
+ this function is used after 1st of session setup requests */
+
+ return rc;
+}
+#endif /* CONFIG_CIFS_EXPERIMENTAL */
/* If the return code is zero, this function must fill in request_buf pointer */
static int
@@ -1042,7 +1070,7 @@
}
}
- cifs_small_buf_release(pSMB);
+/* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */
if(*buf) {
if(resp_buf_type == CIFS_SMALL_BUFFER)
cifs_small_buf_release(iov[0].iov_base);
@@ -1246,7 +1274,7 @@
*nbytes += le16_to_cpu(pSMBr->Count);
}
- cifs_small_buf_release(pSMB);
+/* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */
if(resp_buf_type == CIFS_SMALL_BUFFER)
cifs_small_buf_release(iov[0].iov_base);
else if(resp_buf_type == CIFS_LARGE_BUFFER)
@@ -1325,6 +1353,85 @@
}
int
+CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
+ const __u16 smb_file_id, const int get_flag, const __u64 len,
+ const __u64 lkoffset, const __u16 lock_type, const int waitFlag)
+{
+ struct smb_com_transaction2_sfi_req *pSMB = NULL;
+ struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
+ char *data_offset;
+ struct cifs_posix_lock *parm_data;
+ int rc = 0;
+ int bytes_returned = 0;
+ __u16 params, param_offset, offset, byte_count, count;
+
+ cFYI(1, ("Posix Lock"));
+ rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
+
+ if (rc)
+ return rc;
+
+ pSMBr = (struct smb_com_transaction2_sfi_rsp *)pSMB;
+
+ params = 6;
+ pSMB->MaxSetupCount = 0;
+ pSMB->Reserved = 0;
+ pSMB->Flags = 0;
+ pSMB->Timeout = 0;
+ pSMB->Reserved2 = 0;
+ param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4;
+ offset = param_offset + params;
+
+ data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
+
+ count = sizeof(struct cifs_posix_lock);
+ pSMB->MaxParameterCount = cpu_to_le16(2);
+ pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ pSMB->SetupCount = 1;
+ pSMB->Reserved3 = 0;
+ if(get_flag)
+ pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FILE_INFORMATION);
+ else
+ pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
+ byte_count = 3 /* pad */ + params + count;
+ pSMB->DataCount = cpu_to_le16(count);
+ pSMB->ParameterCount = cpu_to_le16(params);
+ pSMB->TotalDataCount = pSMB->DataCount;
+ pSMB->TotalParameterCount = pSMB->ParameterCount;
+ pSMB->ParameterOffset = cpu_to_le16(param_offset);
+ parm_data = (struct cifs_posix_lock *)
+ (((char *) &pSMB->hdr.Protocol) + offset);
+
+ parm_data->lock_type = cpu_to_le16(lock_type);
+ if(waitFlag)
+ parm_data->lock_flags = 1;
+ parm_data->pid = cpu_to_le32(current->tgid);
+ parm_data->start = lkoffset;
+ parm_data->length = len; /* normalize negative numbers */
+
+ pSMB->DataOffset = cpu_to_le16(offset);
+ pSMB->Fid = smb_file_id;
+ pSMB->InformationLevel = cpu_to_le16(SMB_SET_POSIX_LOCK);
+ pSMB->Reserved4 = 0;
+ pSMB->hdr.smb_buf_length += byte_count;
+ pSMB->ByteCount = cpu_to_le16(byte_count);
+ rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+ (struct smb_hdr *) pSMBr, &bytes_returned, 0);
+ if (rc) {
+ cFYI(1, ("Send error in Posix Lock = %d", rc));
+ }
+
+ if (pSMB)
+ cifs_small_buf_release(pSMB);
+
+ /* Note: On -EAGAIN error only caller can retry on handle based calls
+ since file handle passed in no longer valid */
+
+ return rc;
+}
+
+
+int
CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, int smb_file_id)
{
int rc = 0;
@@ -2578,7 +2685,7 @@
cifs_small_buf_release(iov[0].iov_base);
else if(buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
- cifs_small_buf_release(pSMB);
+/* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */
return rc;
}
@@ -2954,7 +3061,8 @@
pSMB->TotalParameterCount = cpu_to_le16(params);
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->ParameterOffset = cpu_to_le16(
- offsetof(struct smb_com_transaction2_ffirst_req, SearchAttributes) - 4);
+ offsetof(struct smb_com_transaction2_ffirst_req, SearchAttributes)
+ - 4);
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->SetupCount = 1; /* one byte, no need to make endian neutral */
@@ -2977,12 +3085,12 @@
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_ffirst);
- if (rc) {/* BB add logic to retry regular search if Unix search rejected unexpectedly by server */
+ if (rc) {/* BB add logic to retry regular search if Unix search
+ rejected unexpectedly by server */
/* BB Add code to handle unsupported level rc */
cFYI(1, ("Error in FindFirst = %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
/* BB eventually could optimize out free and realloc of buf */
/* for this case */
@@ -2998,6 +3106,7 @@
psrch_inf->unicode = FALSE;
psrch_inf->ntwrk_buf_start = (char *)pSMBr;
+ psrch_inf->smallBuf = 0;
psrch_inf->srch_entries_start =
(char *) &pSMBr->hdr.Protocol +
le16_to_cpu(pSMBr->t2.DataOffset);
@@ -3118,9 +3227,14 @@
parms = (T2_FNEXT_RSP_PARMS *)response_data;
response_data = (char *)&pSMBr->hdr.Protocol +
le16_to_cpu(pSMBr->t2.DataOffset);
- cifs_buf_release(psrch_inf->ntwrk_buf_start);
+ if(psrch_inf->smallBuf)
+ cifs_small_buf_release(
+ psrch_inf->ntwrk_buf_start);
+ else
+ cifs_buf_release(psrch_inf->ntwrk_buf_start);
psrch_inf->srch_entries_start = response_data;
psrch_inf->ntwrk_buf_start = (char *)pSMB;
+ psrch_inf->smallBuf = 0;
if(parms->EndofSearch)
psrch_inf->endOfSearch = TRUE;
else
@@ -3834,6 +3948,7 @@
cFYI(1, ("In SETFSUnixInfo"));
SETFSUnixRetry:
+ /* BB switch to small buf init to save memory */
rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
(void **) &pSMBr);
if (rc)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2a0c1f4..0b86d5c 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/connect.c
*
- * Copyright (C) International Business Machines Corp., 2002,2005
+ * Copyright (C) International Business Machines Corp., 2002,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -564,7 +564,7 @@
dump_smb(smb_buffer, length);
- if (checkSMB (smb_buffer, smb_buffer->Mid, total_read+4)) {
+ if (checkSMB(smb_buffer, smb_buffer->Mid, total_read+4)) {
cifs_dump_mem("Bad SMB: ", smb_buffer, 48);
continue;
}
@@ -1476,6 +1476,14 @@
rc = smb_send(*csocket, smb_buf, 0x44,
(struct sockaddr *)psin_server);
kfree(ses_init_buf);
+ msleep(1); /* RFC1001 layer in at least one server
+ requires very short break before negprot
+ presumably because not expecting negprot
+ to follow so fast. This is a simple
+ solution that works without
+ complicating the code and causes no
+ significant slowing down on mount
+ for everyone else */
}
/* else the negprot may still work without this
even though malloc failed */
@@ -1920,27 +1928,34 @@
cifs_sb->tcon = tcon;
tcon->ses = pSesInfo;
- /* do not care if following two calls succeed - informational only */
+ /* do not care if following two calls succeed - informational */
CIFSSMBQFSDeviceInfo(xid, tcon);
CIFSSMBQFSAttributeInfo(xid, tcon);
+
if (tcon->ses->capabilities & CAP_UNIX) {
if(!CIFSSMBQFSUnixInfo(xid, tcon)) {
- if(!volume_info.no_psx_acl) {
- if(CIFS_UNIX_POSIX_ACL_CAP &
- le64_to_cpu(tcon->fsUnixInfo.Capability))
- cFYI(1,("server negotiated posix acl support"));
- sb->s_flags |= MS_POSIXACL;
+ __u64 cap =
+ le64_to_cpu(tcon->fsUnixInfo.Capability);
+ cap &= CIFS_UNIX_CAP_MASK;
+ if(volume_info.no_psx_acl)
+ cap &= ~CIFS_UNIX_POSIX_ACL_CAP;
+ else if(CIFS_UNIX_POSIX_ACL_CAP & cap) {
+ cFYI(1,("negotiated posix acl support"));
+ sb->s_flags |= MS_POSIXACL;
}
- /* Try and negotiate POSIX pathnames if we can. */
- if (volume_info.posix_paths && (CIFS_UNIX_POSIX_PATHNAMES_CAP &
- le64_to_cpu(tcon->fsUnixInfo.Capability))) {
- if (!CIFSSMBSetFSUnixInfo(xid, tcon, CIFS_UNIX_POSIX_PATHNAMES_CAP)) {
- cFYI(1,("negotiated posix pathnames support"));
- cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_POSIX_PATHS;
- } else {
- cFYI(1,("posix pathnames support requested but not supported"));
- }
+ if(volume_info.posix_paths == 0)
+ cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP;
+ else if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) {
+ cFYI(1,("negotiate posix pathnames"));
+ cifs_sb->mnt_cifs_flags |=
+ CIFS_MOUNT_POSIX_PATHS;
+ }
+
+ cFYI(1,("Negotiate caps 0x%x",(int)cap));
+
+ if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) {
+ cFYI(1,("setting capabilities failed"));
}
}
}
@@ -2278,6 +2293,8 @@
smb_buffer->Mid = GetNextMid(ses->server);
pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
pSMB->req.AndXCommand = 0xFF;
+ if(ses->server->maxBuf > 64*1024)
+ ses->server->maxBuf = (64*1023);
pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
@@ -2525,7 +2542,7 @@
__u32 negotiate_flags, capabilities;
__u16 count;
- cFYI(1, ("In NTLMSSP sesssetup (negotiate) "));
+ cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
if(ses == NULL)
return -EINVAL;
domain = ses->domainName;
@@ -2575,7 +2592,8 @@
SecurityBlob->MessageType = NtLmNegotiate;
negotiate_flags =
NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
- NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM | 0x80000000 |
+ NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
+ NTLMSSP_NEGOTIATE_56 |
/* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
if(sign_CIFS_PDUs)
negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
@@ -2588,26 +2606,11 @@
SecurityBlob->WorkstationName.Length = 0;
SecurityBlob->WorkstationName.MaximumLength = 0;
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 len;
- negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
- strncpy(bcc_ptr, domain, 63);
- len = strnlen(domain, 64);
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(len);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32((long) &SecurityBlob->
- DomainString -
- (long) &SecurityBlob->Signature);
- bcc_ptr += len;
- SecurityBlobLength += len;
- SecurityBlob->DomainName.Length =
- cpu_to_le16(len);
- }
+ /* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
+ along with username on auth request (ie the response to challenge) */
+ SecurityBlob->DomainName.Buffer = 0;
+ SecurityBlob->DomainName.Length = 0;
+ SecurityBlob->DomainName.MaximumLength = 0;
if (ses->capabilities & CAP_UNICODE) {
if ((long) bcc_ptr % 2) {
*bcc_ptr = 0;
@@ -2677,7 +2680,7 @@
SecurityBlob2->MessageType));
} else if (ses) {
ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
- cFYI(1, ("UID = %d ", ses->Suid));
+ cFYI(1, ("UID = %d", ses->Suid));
if ((pSMBr->resp.hdr.WordCount == 3)
|| ((pSMBr->resp.hdr.WordCount == 4)
&& (blob_len <
@@ -2685,17 +2688,17 @@
if (pSMBr->resp.hdr.WordCount == 4) {
bcc_ptr += blob_len;
- cFYI(1,
- ("Security Blob Length %d ",
+ cFYI(1, ("Security Blob Length %d",
blob_len));
}
- cFYI(1, ("NTLMSSP Challenge rcvd "));
+ cFYI(1, ("NTLMSSP Challenge rcvd"));
memcpy(ses->server->cryptKey,
SecurityBlob2->Challenge,
CIFS_CRYPTO_KEY_SIZE);
- if(SecurityBlob2->NegotiateFlags & cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
+ if(SecurityBlob2->NegotiateFlags &
+ cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
*pNTLMv2_flag = TRUE;
if((SecurityBlob2->NegotiateFlags &
@@ -2818,7 +2821,7 @@
bcc_ptr++;
} else
cFYI(1,
- ("Variable field of length %d extends beyond end of smb ",
+ ("Variable field of length %d extends beyond end of smb",
len));
}
} else {
@@ -2830,7 +2833,7 @@
}
} else {
cERROR(1,
- (" Invalid Word count %d: ",
+ (" Invalid Word count %d:",
smb_buffer_response->WordCount));
rc = -EIO;
}
@@ -3447,7 +3450,7 @@
if (extended_security
&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
&& (pSesInfo->server->secType == NTLMSSP)) {
- cFYI(1, ("New style sesssetup "));
+ cFYI(1, ("New style sesssetup"));
rc = CIFSSpnegoSessSetup(xid, pSesInfo,
NULL /* security blob */,
0 /* blob length */,
@@ -3455,7 +3458,7 @@
} else if (extended_security
&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
&& (pSesInfo->server->secType == RawNTLMSSP)) {
- cFYI(1, ("NTLMSSP sesssetup "));
+ cFYI(1, ("NTLMSSP sesssetup"));
rc = CIFSNTLMSSPNegotiateSessSetup(xid,
pSesInfo,
&ntlmv2_flag,
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 632561d..1d0ca3e 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -48,13 +48,14 @@
struct dentry *temp;
int namelen = 0;
char *full_path;
- char dirsep = CIFS_DIR_SEP(CIFS_SB(direntry->d_sb));
+ char dirsep;
if(direntry == NULL)
return NULL; /* not much we can do if dentry is freed and
we need to reopen the file after it was closed implicitly
when the server crashed */
+ dirsep = CIFS_DIR_SEP(CIFS_SB(direntry->d_sb));
cifs_bp_rename_retry:
for (temp = direntry; !IS_ROOT(temp);) {
namelen += (1 + temp->d_name.len);
@@ -255,12 +256,10 @@
CIFSSMBClose(xid, pTcon, fileHandle);
} else if(newinode) {
pCifsFile =
- kmalloc(sizeof (struct cifsFileInfo), GFP_KERNEL);
+ kzalloc(sizeof (struct cifsFileInfo), GFP_KERNEL);
if(pCifsFile == NULL)
goto cifs_create_out;
- memset((char *)pCifsFile, 0,
- sizeof (struct cifsFileInfo));
pCifsFile->netfid = fileHandle;
pCifsFile->pid = current->tgid;
pCifsFile->pInode = newinode;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fb49aef..5c497c5 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -555,7 +555,10 @@
if (ptmp) {
cFYI(1, ("closedir free smb buf in srch struct"));
pCFileStruct->srch_inf.ntwrk_buf_start = NULL;
- cifs_buf_release(ptmp);
+ if(pCFileStruct->srch_inf.smallBuf)
+ cifs_small_buf_release(ptmp);
+ else
+ cifs_buf_release(ptmp);
}
ptmp = pCFileStruct->search_resume_name;
if (ptmp) {
@@ -574,13 +577,14 @@
int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
{
int rc, xid;
- __u32 lockType = LOCKING_ANDX_LARGE_FILES;
__u32 numLock = 0;
__u32 numUnlock = 0;
__u64 length;
int wait_flag = FALSE;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
+ __u16 netfid;
+ __u8 lockType = LOCKING_ANDX_LARGE_FILES;
length = 1 + pfLock->fl_end - pfLock->fl_start;
rc = -EACCES;
@@ -592,11 +596,11 @@
pfLock->fl_end));
if (pfLock->fl_flags & FL_POSIX)
- cFYI(1, ("Posix "));
+ cFYI(1, ("Posix"));
if (pfLock->fl_flags & FL_FLOCK)
- cFYI(1, ("Flock "));
+ cFYI(1, ("Flock"));
if (pfLock->fl_flags & FL_SLEEP) {
- cFYI(1, ("Blocking lock "));
+ cFYI(1, ("Blocking lock"));
wait_flag = TRUE;
}
if (pfLock->fl_flags & FL_ACCESS)
@@ -612,21 +616,23 @@
cFYI(1, ("F_WRLCK "));
numLock = 1;
} else if (pfLock->fl_type == F_UNLCK) {
- cFYI(1, ("F_UNLCK "));
+ cFYI(1, ("F_UNLCK"));
numUnlock = 1;
+ /* Check if unlock includes more than
+ one lock range */
} else if (pfLock->fl_type == F_RDLCK) {
- cFYI(1, ("F_RDLCK "));
+ cFYI(1, ("F_RDLCK"));
lockType |= LOCKING_ANDX_SHARED_LOCK;
numLock = 1;
} else if (pfLock->fl_type == F_EXLCK) {
- cFYI(1, ("F_EXLCK "));
+ cFYI(1, ("F_EXLCK"));
numLock = 1;
} else if (pfLock->fl_type == F_SHLCK) {
- cFYI(1, ("F_SHLCK "));
+ cFYI(1, ("F_SHLCK"));
lockType |= LOCKING_ANDX_SHARED_LOCK;
numLock = 1;
} else
- cFYI(1, ("Unknown type of lock "));
+ cFYI(1, ("Unknown type of lock"));
cifs_sb = CIFS_SB(file->f_dentry->d_sb);
pTcon = cifs_sb->tcon;
@@ -635,27 +641,41 @@
FreeXid(xid);
return -EBADF;
}
+ netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
+
+ /* BB add code here to normalize offset and length to
+ account for negative length which we can not accept over the
+ wire */
if (IS_GETLK(cmd)) {
- rc = CIFSSMBLock(xid, pTcon,
- ((struct cifsFileInfo *)file->
- private_data)->netfid,
- length,
- pfLock->fl_start, 0, 1, lockType,
- 0 /* wait flag */ );
+ if(experimEnabled &&
+ (cifs_sb->tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_FCNTL_CAP &
+ le64_to_cpu(cifs_sb->tcon->fsUnixInfo.Capability))) {
+ int posix_lock_type;
+ if(lockType & LOCKING_ANDX_SHARED_LOCK)
+ posix_lock_type = CIFS_RDLCK;
+ else
+ posix_lock_type = CIFS_WRLCK;
+ rc = CIFSSMBPosixLock(xid, pTcon, netfid, 1 /* get */,
+ length, pfLock->fl_start,
+ posix_lock_type, wait_flag);
+ FreeXid(xid);
+ return rc;
+ }
+
+ /* BB we could chain these into one lock request BB */
+ rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
+ 0, 1, lockType, 0 /* wait flag */ );
if (rc == 0) {
- rc = CIFSSMBLock(xid, pTcon,
- ((struct cifsFileInfo *) file->
- private_data)->netfid,
- length,
+ rc = CIFSSMBLock(xid, pTcon, netfid, length,
pfLock->fl_start, 1 /* numUnlock */ ,
0 /* numLock */ , lockType,
0 /* wait flag */ );
pfLock->fl_type = F_UNLCK;
if (rc != 0)
cERROR(1, ("Error unlocking previously locked "
- "range %d during test of lock ",
- rc));
+ "range %d during test of lock", rc));
rc = 0;
} else {
@@ -667,12 +687,30 @@
FreeXid(xid);
return rc;
}
-
- rc = CIFSSMBLock(xid, pTcon,
- ((struct cifsFileInfo *) file->private_data)->
- netfid, length,
- pfLock->fl_start, numUnlock, numLock, lockType,
- wait_flag);
+ if (experimEnabled &&
+ (cifs_sb->tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_FCNTL_CAP &
+ le64_to_cpu(cifs_sb->tcon->fsUnixInfo.Capability))) {
+ int posix_lock_type;
+ if(lockType & LOCKING_ANDX_SHARED_LOCK)
+ posix_lock_type = CIFS_RDLCK;
+ else
+ posix_lock_type = CIFS_WRLCK;
+
+ if(numUnlock == 1)
+ posix_lock_type = CIFS_UNLCK;
+ else if(numLock == 0) {
+ /* if no lock or unlock then nothing
+ to do since we do not know what it is */
+ FreeXid(xid);
+ return -EOPNOTSUPP;
+ }
+ rc = CIFSSMBPosixLock(xid, pTcon, netfid, 0 /* set */,
+ length, pfLock->fl_start,
+ posix_lock_type, wait_flag);
+ } else
+ rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
+ numUnlock, numLock, lockType, wait_flag);
if (pfLock->fl_flags & FL_POSIX)
posix_lock_file_wait(file, pfLock);
FreeXid(xid);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 598eec9..957ddd1 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -565,11 +565,14 @@
struct cifsInodeInfo *cifsInode;
FILE_BASIC_INFO *pinfo_buf;
- cFYI(1, ("cifs_unlink, inode = 0x%p with ", inode));
+ cFYI(1, ("cifs_unlink, inode = 0x%p", inode));
xid = GetXid();
- cifs_sb = CIFS_SB(inode->i_sb);
+ if(inode)
+ cifs_sb = CIFS_SB(inode->i_sb);
+ else
+ cifs_sb = CIFS_SB(direntry->d_sb);
pTcon = cifs_sb->tcon;
/* Unlink can be called from rename so we can not grab the sem here
@@ -609,9 +612,8 @@
}
} else if (rc == -EACCES) {
/* try only if r/o attribute set in local lookup data? */
- pinfo_buf = kmalloc(sizeof(FILE_BASIC_INFO), GFP_KERNEL);
+ pinfo_buf = kzalloc(sizeof(FILE_BASIC_INFO), GFP_KERNEL);
if (pinfo_buf) {
- memset(pinfo_buf, 0, sizeof(FILE_BASIC_INFO));
/* ATTRS set to normal clears r/o bit */
pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL);
if (!(pTcon->ses->flags & CIFS_SES_NT4))
@@ -693,9 +695,11 @@
when needed */
direntry->d_inode->i_ctime = current_fs_time(inode->i_sb);
}
- inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb);
- cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* force revalidate of dir as well */
+ if(inode) {
+ inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb);
+ cifsInode = CIFS_I(inode);
+ cifsInode->time = 0; /* force revalidate of dir as well */
+ }
kfree(full_path);
FreeXid(xid);
@@ -1167,7 +1171,7 @@
nfid, npid, FALSE);
atomic_dec(&open_file->wrtPending);
cFYI(1,("SetFSize for attrs rc = %d", rc));
- if(rc == -EINVAL) {
+ if((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
int bytes_written;
rc = CIFSSMBWrite(xid, pTcon,
nfid, 0, attrs->ia_size,
@@ -1189,7 +1193,7 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
- if(rc == -EINVAL) {
+ if((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
__u16 netfid;
int oplock = FALSE;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 8d0da7c..9562f5b 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -67,7 +67,7 @@
cifs_sb_target->local_nls,
cifs_sb_target->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if(rc == -EIO)
+ if((rc == -EIO) || (rc == -EINVAL))
rc = -EOPNOTSUPP;
}
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 432ba15..fafd056 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -72,10 +72,9 @@
struct cifsSesInfo *ret_buf;
ret_buf =
- (struct cifsSesInfo *) kmalloc(sizeof (struct cifsSesInfo),
+ (struct cifsSesInfo *) kzalloc(sizeof (struct cifsSesInfo),
GFP_KERNEL);
if (ret_buf) {
- memset(ret_buf, 0, sizeof (struct cifsSesInfo));
write_lock(&GlobalSMBSeslock);
atomic_inc(&sesInfoAllocCount);
ret_buf->status = CifsNew;
@@ -110,10 +109,9 @@
{
struct cifsTconInfo *ret_buf;
ret_buf =
- (struct cifsTconInfo *) kmalloc(sizeof (struct cifsTconInfo),
+ (struct cifsTconInfo *) kzalloc(sizeof (struct cifsTconInfo),
GFP_KERNEL);
if (ret_buf) {
- memset(ret_buf, 0, sizeof (struct cifsTconInfo));
write_lock(&GlobalSMBSeslock);
atomic_inc(&tconInfoAllocCount);
list_add(&ret_buf->cifsConnectionList,
@@ -423,9 +421,7 @@
{
__u32 len = smb->smb_buf_length;
__u32 clc_len; /* calculated length */
- cFYI(0,
- ("Entering checkSMB with Length: %x, smb_buf_length: %x",
- length, len));
+ cFYI(0, ("checkSMB Length: 0x%x, smb_buf_length: 0x%x", length, len));
if (((unsigned int)length < 2 + sizeof (struct smb_hdr)) ||
(len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4)) {
if ((unsigned int)length < 2 + sizeof (struct smb_hdr)) {
@@ -433,29 +429,36 @@
sizeof (struct smb_hdr) - 1)
&& (smb->Status.CifsError != 0)) {
smb->WordCount = 0;
- return 0; /* some error cases do not return wct and bcc */
+ /* some error cases do not return wct and bcc */
+ return 0;
} else {
cERROR(1, ("Length less than smb header size"));
}
-
}
if (len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4)
- cERROR(1,
- ("smb_buf_length greater than MaxBufSize"));
- cERROR(1,
- ("bad smb detected. Illegal length. mid=%d",
- smb->Mid));
+ cERROR(1, ("smb length greater than MaxBufSize, mid=%d",
+ smb->Mid));
return 1;
}
if (checkSMBhdr(smb, mid))
return 1;
clc_len = smbCalcSize_LE(smb);
- if ((4 + len != clc_len)
- || (4 + len != (unsigned int)length)) {
- cERROR(1, ("Calculated size 0x%x vs actual length 0x%x",
- clc_len, 4 + len));
- cERROR(1, ("bad smb size detected for Mid=%d", smb->Mid));
+
+ if(4 + len != (unsigned int)length) {
+ cERROR(1, ("Length read does not match RFC1001 length %d",len));
+ return 1;
+ }
+
+ if (4 + len != clc_len) {
+ /* check if bcc wrapped around for large read responses */
+ if((len > 64 * 1024) && (len > clc_len)) {
+ /* check if lengths match mod 64K */
+ if(((4 + len) & 0xFFFF) == (clc_len & 0xFFFF))
+ return 0; /* bcc wrapped */
+ }
+ cFYI(1, ("Calculated size %d vs length %d mismatch for mid %d",
+ clc_len, 4 + len, smb->Mid));
/* Windows XP can return a few bytes too much, presumably
an illegal pad, at the end of byte range lock responses
so we allow for that three byte pad, as long as actual
@@ -469,8 +472,11 @@
wct and bcc to minimum size and drop the t2 parms and data */
if((4+len > clc_len) && (len <= clc_len + 512))
return 0;
- else
+ else {
+ cERROR(1, ("RFC1001 size %d bigger than SMB for Mid=%d",
+ len, smb->Mid));
return 1;
+ }
}
return 0;
}
diff --git a/fs/cifs/ntlmssp.c b/fs/cifs/ntlmssp.c
new file mode 100644
index 0000000..78866f9
--- /dev/null
+++ b/fs/cifs/ntlmssp.c
@@ -0,0 +1,129 @@
+/*
+ * fs/cifs/ntlmssp.h
+ *
+ * Copyright (c) International Business Machines Corp., 2006
+ * Author(s): Steve French (sfrench@us.ibm.com)
+ *
+ * This library is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "cifspdu.h"
+#include "cifsglob.h"
+#include "cifsproto.h"
+#include "cifs_unicode.h"
+#include "cifs_debug.h"
+#include "ntlmssp.h"
+#include "nterr.h"
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
+{
+ __u32 capabilities = 0;
+
+ /* init fields common to all four types of SessSetup */
+ /* note that header is initialized to zero in header_assemble */
+ pSMB->req.AndXCommand = 0xFF;
+ pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
+ pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
+
+ /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */
+
+ /* BB verify whether signing required on neg or just on auth frame
+ (and NTLM case) */
+
+ capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
+ CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
+
+ if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ pSMB->req.hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
+
+ if (ses->capabilities & CAP_UNICODE) {
+ pSMB->req.hdr.Flags2 |= SMBFLG2_UNICODE;
+ capabilities |= CAP_UNICODE;
+ }
+ if (ses->capabilities & CAP_STATUS32) {
+ pSMB->req.hdr.Flags2 |= SMBFLG2_ERR_STATUS;
+ capabilities |= CAP_STATUS32;
+ }
+ if (ses->capabilities & CAP_DFS) {
+ pSMB->req.hdr.Flags2 |= SMBFLG2_DFS;
+ capabilities |= CAP_DFS;
+ }
+
+ /* BB check whether to init vcnum BB */
+ return capabilities;
+}
+int
+CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, const int type,
+ int * pNTLMv2_flg, const struct nls_table *nls_cp)
+{
+ int rc = 0;
+ int wct;
+ struct smb_hdr *smb_buffer;
+ char *bcc_ptr;
+ SESSION_SETUP_ANDX *pSMB;
+ __u32 capabilities;
+
+ if(ses == NULL)
+ return -EINVAL;
+
+ cFYI(1,("SStp type: %d",type));
+ if(type < CIFS_NTLM) {
+#ifndef CONFIG_CIFS_WEAK_PW_HASH
+ /* LANMAN and plaintext are less secure and off by default.
+ So we make this explicitly be turned on in kconfig (in the
+ build) and turned on at runtime (changed from the default)
+ in proc/fs/cifs or via mount parm. Unfortunately this is
+ needed for old Win (e.g. Win95), some obscure NAS and OS/2 */
+ return -EOPNOTSUPP;
+#endif
+ wct = 10; /* lanman 2 style sessionsetup */
+ } else if(type < CIFS_NTLMSSP_NEG)
+ wct = 13; /* old style NTLM sessionsetup */
+ else /* same size for negotiate or auth, NTLMSSP or extended security */
+ wct = 12;
+
+ rc = small_smb_init_no_tc(SMB_COM_SESSION_SETUP_ANDX, wct, ses,
+ (void **)&smb_buffer);
+ if(rc)
+ return rc;
+
+ pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
+
+ capabilities = cifs_ssetup_hdr(ses, pSMB);
+ bcc_ptr = pByteArea(smb_buffer);
+ if(type > CIFS_NTLM) {
+ pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ capabilities |= CAP_EXTENDED_SECURITY;
+ pSMB->req.Capabilities = cpu_to_le32(capabilities);
+ /* BB set password lengths */
+ } else if(type < CIFS_NTLM) /* lanman */ {
+ /* no capabilities flags in old lanman negotiation */
+ /* pSMB->old_req.PasswordLength = */ /* BB fixme BB */
+ } else /* type CIFS_NTLM */ {
+ pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
+ pSMB->req_no_secext.CaseInsensitivePasswordLength =
+ cpu_to_le16(CIFS_SESSION_KEY_SIZE);
+ pSMB->req_no_secext.CaseSensitivePasswordLength =
+ cpu_to_le16(CIFS_SESSION_KEY_SIZE);
+ }
+
+
+/* rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buf_type, 0); */
+ /* SMB request buf freed in SendReceive2 */
+
+ return rc;
+}
+#endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index 803389b..d39b712 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -1,7 +1,7 @@
/*
* fs/cifs/ntlmssp.h
*
- * Copyright (c) International Business Machines Corp., 2002
+ * Copyright (c) International Business Machines Corp., 2002,2006
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 488bd0d8..2f6e282 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -604,7 +604,12 @@
cifsFile->search_resume_name = NULL;
if(cifsFile->srch_inf.ntwrk_buf_start) {
cFYI(1,("freeing SMB ff cache buf on search rewind"));
- cifs_buf_release(cifsFile->srch_inf.ntwrk_buf_start);
+ if(cifsFile->srch_inf.smallBuf)
+ cifs_small_buf_release(cifsFile->srch_inf.
+ ntwrk_buf_start);
+ else
+ cifs_buf_release(cifsFile->srch_inf.
+ ntwrk_buf_start);
}
rc = initiate_cifs_search(xid,file);
if(rc) {
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index b12cb8a..3da8040 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -309,17 +309,16 @@
*pRespBufType = CIFS_NO_BUFFER; /* no response buf yet */
- if (ses == NULL) {
- cERROR(1,("Null smb session"));
- return -EIO;
- }
- if(ses->server == NULL) {
- cERROR(1,("Null tcp session"));
+ if ((ses == NULL) || (ses->server == NULL)) {
+ cifs_small_buf_release(in_buf);
+ cERROR(1,("Null session"));
return -EIO;
}
- if(ses->server->tcpStatus == CifsExiting)
+ if(ses->server->tcpStatus == CifsExiting) {
+ cifs_small_buf_release(in_buf);
return -ENOENT;
+ }
/* Ensure that we do not send more than 50 overlapping requests
to the same server. We may make this configurable later or
@@ -346,6 +345,7 @@
} else {
if(ses->server->tcpStatus == CifsExiting) {
spin_unlock(&GlobalMid_Lock);
+ cifs_small_buf_release(in_buf);
return -ENOENT;
}
@@ -385,6 +385,7 @@
midQ = AllocMidQEntry(in_buf, ses);
if (midQ == NULL) {
up(&ses->server->tcpSem);
+ cifs_small_buf_release(in_buf);
/* If not lock req, update # of requests on wire to server */
if(long_op < 3) {
atomic_dec(&ses->server->inFlight);
@@ -408,14 +409,18 @@
if(rc < 0) {
DeleteMidQEntry(midQ);
up(&ses->server->tcpSem);
+ cifs_small_buf_release(in_buf);
/* If not lock req, update # of requests on wire to server */
if(long_op < 3) {
atomic_dec(&ses->server->inFlight);
wake_up(&ses->server->request_q);
}
return rc;
- } else
+ } else {
up(&ses->server->tcpSem);
+ cifs_small_buf_release(in_buf);
+ }
+
if (long_op == -1)
goto cifs_no_response_exit2;
else if (long_op == 2) /* writes past end of file can take loong time */
@@ -543,6 +548,7 @@
out_unlock2:
up(&ses->server->tcpSem);
+ cifs_small_buf_release(in_buf);
/* If not lock req, update # of requests on wire to server */
if(long_op < 3) {
atomic_dec(&ses->server->inFlight);
diff --git a/fs/dcache.c b/fs/dcache.c
index 19458d3..940d188 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1101,6 +1101,32 @@
}
/**
+ * d_hash_and_lookup - hash the qstr then search for a dentry
+ * @dir: Directory to search in
+ * @name: qstr of name we wish to find
+ *
+ * On hash failure or on lookup failure NULL is returned.
+ */
+struct dentry *d_hash_and_lookup(struct dentry *dir, struct qstr *name)
+{
+ struct dentry *dentry = NULL;
+
+ /*
+ * Check for a fs-specific hash function. Note that we must
+ * calculate the standard hash first, as the d_op->d_hash()
+ * routine may choose to leave the hash value unchanged.
+ */
+ name->hash = full_name_hash(name->name, name->len);
+ if (dir->d_op && dir->d_op->d_hash) {
+ if (dir->d_op->d_hash(dir, name) < 0)
+ goto out;
+ }
+ dentry = d_lookup(dir, name);
+out:
+ return dentry;
+}
+
+/**
* d_validate - verify dentry provided from insecure source
* @dentry: The dentry alleged to be valid child of @dparent
* @dparent: The parent dentry (known to be valid)
@@ -1172,11 +1198,11 @@
spin_lock(&dentry->d_lock);
isdir = S_ISDIR(dentry->d_inode->i_mode);
if (atomic_read(&dentry->d_count) == 1) {
- /* remove this and other inotify debug checks after 2.6.18 */
- dentry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
-
dentry_iput(dentry);
fsnotify_nameremove(dentry, isdir);
+
+ /* remove this and other inotify debug checks after 2.6.18 */
+ dentry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
return;
}
@@ -1616,26 +1642,12 @@
struct dentry * dentry;
ino_t ino = 0;
- /*
- * Check for a fs-specific hash function. Note that we must
- * calculate the standard hash first, as the d_op->d_hash()
- * routine may choose to leave the hash value unchanged.
- */
- name->hash = full_name_hash(name->name, name->len);
- if (dir->d_op && dir->d_op->d_hash)
- {
- if (dir->d_op->d_hash(dir, name) != 0)
- goto out;
- }
-
- dentry = d_lookup(dir, name);
- if (dentry)
- {
+ dentry = d_hash_and_lookup(dir, name);
+ if (dentry) {
if (dentry->d_inode)
ino = dentry->d_inode->i_ino;
dput(dentry);
}
-out:
return ino;
}
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 9d1d2aa..910a8ed 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -524,8 +524,6 @@
*/
ret = dio->page_errors;
if (ret == 0) {
- map_bh->b_state = 0;
- map_bh->b_size = 0;
BUG_ON(dio->block_in_file >= dio->final_block_in_request);
fs_startblk = dio->block_in_file >> dio->blkfactor;
dio_count = dio->final_block_in_request - dio->block_in_file;
@@ -534,6 +532,9 @@
if (dio_count & blkmask)
fs_count++;
+ map_bh->b_state = 0;
+ map_bh->b_size = fs_count << dio->inode->i_blkbits;
+
create = dio->rw == WRITE;
if (dio->lock_type == DIO_LOCKING) {
if (dio->block_in_file < (i_size_read(dio->inode) >>
@@ -542,13 +543,13 @@
} else if (dio->lock_type == DIO_NO_LOCKING) {
create = 0;
}
+
/*
* For writes inside i_size we forbid block creations: only
* overwrites are permitted. We fall back to buffered writes
* at a higher level for inside-i_size block-instantiating
* writes.
*/
- map_bh->b_size = fs_count << dio->blkbits;
ret = (*dio->get_block)(dio->inode, fs_startblk,
map_bh, create);
}
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 509ccec..23e2c7c 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -53,6 +53,8 @@
.readv = generic_file_readv,
.writev = generic_file_writev,
.sendfile = generic_file_sendfile,
+ .splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
};
#ifdef CONFIG_EXT2_FS_XIP
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index 783a796..1efefb6 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -119,6 +119,8 @@
.release = ext3_release_file,
.fsync = ext3_sync_file,
.sendfile = generic_file_sendfile,
+ .splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
};
struct inode_operations ext3_file_inode_operations = {
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs_kern.c
index 2ba20cd..5e6363b 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs_kern.c
@@ -216,10 +216,10 @@
static struct inode_operations hppfs_file_iops = {
};
-static ssize_t read_proc(struct file *file, char *buf, ssize_t count,
+static ssize_t read_proc(struct file *file, char __user *buf, ssize_t count,
loff_t *ppos, int is_user)
{
- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
+ ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
ssize_t n;
read = file->f_dentry->d_inode->i_fop->read;
@@ -236,7 +236,7 @@
return n;
}
-static ssize_t hppfs_read_file(int fd, char *buf, ssize_t count)
+static ssize_t hppfs_read_file(int fd, char __user *buf, ssize_t count)
{
ssize_t n;
int cur, err;
@@ -274,7 +274,7 @@
return n;
}
-static ssize_t hppfs_read(struct file *file, char *buf, size_t count,
+static ssize_t hppfs_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
struct hppfs_private *hppfs = file->private_data;
@@ -313,12 +313,12 @@
return(count);
}
-static ssize_t hppfs_write(struct file *file, const char *buf, size_t len,
+static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
loff_t *ppos)
{
struct hppfs_private *data = file->private_data;
struct file *proc_file = data->proc_file;
- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
+ ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
int err;
write = proc_file->f_dentry->d_inode->i_fop->write;
@@ -658,7 +658,7 @@
.statfs = hppfs_statfs,
};
-static int hppfs_readlink(struct dentry *dentry, char *buffer, int buflen)
+static int hppfs_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct file *proc_file;
struct dentry *proc_dentry;
diff --git a/fs/locks.c b/fs/locks.c
index 4d9e71d..dda83d6 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -168,18 +168,9 @@
/* Free a lock which is not in use. */
static void locks_free_lock(struct file_lock *fl)
{
- if (fl == NULL) {
- BUG();
- return;
- }
- if (waitqueue_active(&fl->fl_wait))
- panic("Attempting to free lock with active wait queue");
-
- if (!list_empty(&fl->fl_block))
- panic("Attempting to free lock with active block list");
-
- if (!list_empty(&fl->fl_link))
- panic("Attempting to free lock on active lock list");
+ BUG_ON(waitqueue_active(&fl->fl_wait));
+ BUG_ON(!list_empty(&fl->fl_block));
+ BUG_ON(!list_empty(&fl->fl_link));
locks_release_private(fl);
kmem_cache_free(filelock_cache, fl);
@@ -735,8 +726,9 @@
* at the head of the list, but that's secret knowledge known only to
* flock_lock_file and posix_lock_file.
*/
-static int flock_lock_file(struct file *filp, struct file_lock *new_fl)
+static int flock_lock_file(struct file *filp, struct file_lock *request)
{
+ struct file_lock *new_fl = NULL;
struct file_lock **before;
struct inode * inode = filp->f_dentry->d_inode;
int error = 0;
@@ -751,17 +743,19 @@
continue;
if (filp != fl->fl_file)
continue;
- if (new_fl->fl_type == fl->fl_type)
+ if (request->fl_type == fl->fl_type)
goto out;
found = 1;
locks_delete_lock(before);
break;
}
- unlock_kernel();
- if (new_fl->fl_type == F_UNLCK)
- return 0;
+ if (request->fl_type == F_UNLCK)
+ goto out;
+ new_fl = locks_alloc_lock();
+ if (new_fl == NULL)
+ goto out;
/*
* If a higher-priority process was blocked on the old file lock,
* give it the opportunity to lock the file.
@@ -769,26 +763,27 @@
if (found)
cond_resched();
- lock_kernel();
for_each_lock(inode, before) {
struct file_lock *fl = *before;
if (IS_POSIX(fl))
break;
if (IS_LEASE(fl))
continue;
- if (!flock_locks_conflict(new_fl, fl))
+ if (!flock_locks_conflict(request, fl))
continue;
error = -EAGAIN;
- if (new_fl->fl_flags & FL_SLEEP) {
- locks_insert_block(fl, new_fl);
- }
+ if (request->fl_flags & FL_SLEEP)
+ locks_insert_block(fl, request);
goto out;
}
+ locks_copy_lock(new_fl, request);
locks_insert_lock(&inode->i_flock, new_fl);
- error = 0;
+ new_fl = NULL;
out:
unlock_kernel();
+ if (new_fl)
+ locks_free_lock(new_fl);
return error;
}
@@ -1569,9 +1564,7 @@
error = flock_lock_file_wait(filp, lock);
out_free:
- if (list_empty(&lock->fl_link)) {
- locks_free_lock(lock);
- }
+ locks_free_lock(lock);
out_putf:
fput(filp);
diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index 626a367..5b76ccd 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -12,14 +12,6 @@
#include <linux/msdos_fs.h>
#include <linux/smp_lock.h>
-/* MS-DOS "device special files" */
-static const unsigned char *reserved_names[] = {
- "CON ", "PRN ", "NUL ", "AUX ",
- "LPT1 ", "LPT2 ", "LPT3 ", "LPT4 ",
- "COM1 ", "COM2 ", "COM3 ", "COM4 ",
- NULL
-};
-
/* Characters that are undesirable in an MS-DOS file name */
static unsigned char bad_chars[] = "*?<>|\"";
static unsigned char bad_if_strict_pc[] = "+=,; ";
@@ -40,7 +32,6 @@
*/
{
unsigned char *walk;
- const unsigned char **reserved;
unsigned char c;
int space;
@@ -127,11 +118,7 @@
}
while (walk - res < MSDOS_NAME)
*walk++ = ' ';
- if (!opts->atari)
- /* GEMDOS is less stupid and has no reserved names */
- for (reserved = reserved_names; *reserved; reserved++)
- if (!strncmp(res, *reserved, 8))
- return -EINVAL;
+
return 0;
}
diff --git a/fs/namei.c b/fs/namei.c
index 22f6e8d..96723ae 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1254,7 +1254,7 @@
return dentry;
}
-struct dentry * lookup_hash(struct nameidata *nd)
+static struct dentry *lookup_hash(struct nameidata *nd)
{
return __lookup_hash(&nd->last, nd->dentry, nd);
}
@@ -2697,7 +2697,6 @@
EXPORT_SYMBOL(get_write_access); /* binfmt_aout */
EXPORT_SYMBOL(getname);
EXPORT_SYMBOL(lock_rename);
-EXPORT_SYMBOL(lookup_hash);
EXPORT_SYMBOL(lookup_one_len);
EXPORT_SYMBOL(page_follow_link_light);
EXPORT_SYMBOL(page_put_link);
diff --git a/fs/partitions/mac.c b/fs/partitions/mac.c
index bb22cdd..813292f 100644
--- a/fs/partitions/mac.c
+++ b/fs/partitions/mac.c
@@ -12,6 +12,7 @@
#include "mac.h"
#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
extern void note_bootable_part(dev_t dev, int part, int goodness);
#endif
@@ -79,7 +80,7 @@
* If this is the first bootable partition, tell the
* setup code, in case it wants to make this the root.
*/
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
int goodness = 0;
mac_fix_string(part->processor, 16);
diff --git a/fs/pipe.c b/fs/pipe.c
index e2f4f1d..109a102 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -15,6 +15,7 @@
#include <linux/pipe_fs_i.h>
#include <linux/uio.h>
#include <linux/highmem.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
@@ -94,11 +95,20 @@
{
struct page *page = buf->page;
- if (info->tmp_page) {
- __free_page(page);
+ /*
+ * If nobody else uses this page, and we don't already have a
+ * temporary page, let's keep track of it as a one-deep
+ * allocation cache
+ */
+ if (page_count(page) == 1 && !info->tmp_page) {
+ info->tmp_page = page;
return;
}
- info->tmp_page = page;
+
+ /*
+ * Otherwise just release our reference to it
+ */
+ page_cache_release(page);
}
static void *anon_pipe_buf_map(struct file *file, struct pipe_inode_info *info, struct pipe_buffer *buf)
@@ -111,11 +121,19 @@
kunmap(buf->page);
}
+static int anon_pipe_buf_steal(struct pipe_inode_info *info,
+ struct pipe_buffer *buf)
+{
+ buf->stolen = 1;
+ return 0;
+}
+
static struct pipe_buf_operations anon_pipe_buf_ops = {
.can_merge = 1,
.map = anon_pipe_buf_map,
.unmap = anon_pipe_buf_unmap,
.release = anon_pipe_buf_release,
+ .steal = anon_pipe_buf_steal,
};
static ssize_t
@@ -152,6 +170,11 @@
chars = total_len;
addr = ops->map(filp, info, buf);
+ if (IS_ERR(addr)) {
+ if (!ret)
+ ret = PTR_ERR(addr);
+ break;
+ }
error = pipe_iov_copy_to_user(iov, addr + buf->offset, chars);
ops->unmap(info, buf);
if (unlikely(error)) {
@@ -254,8 +277,16 @@
struct pipe_buf_operations *ops = buf->ops;
int offset = buf->offset + buf->len;
if (ops->can_merge && offset + chars <= PAGE_SIZE) {
- void *addr = ops->map(filp, info, buf);
- int error = pipe_iov_copy_from_user(offset + addr, iov, chars);
+ void *addr;
+ int error;
+
+ addr = ops->map(filp, info, buf);
+ if (IS_ERR(addr)) {
+ error = PTR_ERR(addr);
+ goto out;
+ }
+ error = pipe_iov_copy_from_user(offset + addr, iov,
+ chars);
ops->unmap(info, buf);
ret = error;
do_wakeup = 1;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 8f1f49c..a3a3eec 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -534,12 +534,15 @@
/* If the process being read is separated by chroot from the reading process,
* don't let the reader access the threads.
+ *
+ * note: this does dput(root) and mntput(vfsmnt) on exit.
*/
static int proc_check_chroot(struct dentry *root, struct vfsmount *vfsmnt)
{
struct dentry *de, *base;
struct vfsmount *our_vfsmnt, *mnt;
int res = 0;
+
read_lock(¤t->fs->lock);
our_vfsmnt = mntget(current->fs->rootmnt);
base = dget(current->fs->root);
@@ -549,11 +552,11 @@
de = root;
mnt = vfsmnt;
- while (vfsmnt != our_vfsmnt) {
- if (vfsmnt == vfsmnt->mnt_parent)
+ while (mnt != our_vfsmnt) {
+ if (mnt == mnt->mnt_parent)
goto out;
- de = vfsmnt->mnt_mountpoint;
- vfsmnt = vfsmnt->mnt_parent;
+ de = mnt->mnt_mountpoint;
+ mnt = mnt->mnt_parent;
}
if (!is_subdir(de, base))
@@ -564,7 +567,7 @@
dput(base);
mntput(our_vfsmnt);
dput(root);
- mntput(mnt);
+ mntput(vfsmnt);
return res;
out:
spin_unlock(&vfsmount_lock);
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 596b4b4..abdf068 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -52,7 +52,8 @@
* Add a property to a node
*/
static struct proc_dir_entry *
-__proc_device_tree_add_prop(struct proc_dir_entry *de, struct property *pp)
+__proc_device_tree_add_prop(struct proc_dir_entry *de, struct property *pp,
+ const char *name)
{
struct proc_dir_entry *ent;
@@ -60,14 +61,14 @@
* Unfortunately proc_register puts each new entry
* at the beginning of the list. So we rearrange them.
*/
- ent = create_proc_read_entry(pp->name,
- strncmp(pp->name, "security-", 9)
+ ent = create_proc_read_entry(name,
+ strncmp(name, "security-", 9)
? S_IRUGO : S_IRUSR, de,
property_read_proc, pp);
if (ent == NULL)
return NULL;
- if (!strncmp(pp->name, "security-", 9))
+ if (!strncmp(name, "security-", 9))
ent->size = 0; /* don't leak number of password chars */
else
ent->size = pp->length;
@@ -78,7 +79,7 @@
void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop)
{
- __proc_device_tree_add_prop(pde, prop);
+ __proc_device_tree_add_prop(pde, prop, prop->name);
}
void proc_device_tree_remove_prop(struct proc_dir_entry *pde,
@@ -106,6 +107,69 @@
}
/*
+ * Various dodgy firmware might give us nodes and/or properties with
+ * conflicting names. That's generally ok, except for exporting via /proc,
+ * so munge names here to ensure they're unique.
+ */
+
+static int duplicate_name(struct proc_dir_entry *de, const char *name)
+{
+ struct proc_dir_entry *ent;
+ int found = 0;
+
+ spin_lock(&proc_subdir_lock);
+
+ for (ent = de->subdir; ent != NULL; ent = ent->next) {
+ if (strcmp(ent->name, name) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ spin_unlock(&proc_subdir_lock);
+
+ return found;
+}
+
+static const char *fixup_name(struct device_node *np, struct proc_dir_entry *de,
+ const char *name)
+{
+ char *fixed_name;
+ int fixup_len = strlen(name) + 2 + 1; /* name + #x + \0 */
+ int i = 1, size;
+
+realloc:
+ fixed_name = kmalloc(fixup_len, GFP_KERNEL);
+ if (fixed_name == NULL) {
+ printk(KERN_ERR "device-tree: Out of memory trying to fixup "
+ "name \"%s\"\n", name);
+ return name;
+ }
+
+retry:
+ size = snprintf(fixed_name, fixup_len, "%s#%d", name, i);
+ size++; /* account for NULL */
+
+ if (size > fixup_len) {
+ /* We ran out of space, free and reallocate. */
+ kfree(fixed_name);
+ fixup_len = size;
+ goto realloc;
+ }
+
+ if (duplicate_name(de, fixed_name)) {
+ /* Multiple duplicates. Retry with a different offset. */
+ i++;
+ goto retry;
+ }
+
+ printk(KERN_WARNING "device-tree: Duplicate name in %s, "
+ "renamed to \"%s\"\n", np->full_name, fixed_name);
+
+ return fixed_name;
+}
+
+/*
* Process a node, adding entries for its children and its properties.
*/
void proc_device_tree_add_node(struct device_node *np,
@@ -118,37 +182,30 @@
set_node_proc_entry(np, de);
for (child = NULL; (child = of_get_next_child(np, child));) {
+ /* Use everything after the last slash, or the full name */
p = strrchr(child->full_name, '/');
if (!p)
p = child->full_name;
else
++p;
+
+ if (duplicate_name(de, p))
+ p = fixup_name(np, de, p);
+
ent = proc_mkdir(p, de);
if (ent == 0)
break;
proc_device_tree_add_node(child, ent);
}
of_node_put(child);
- for (pp = np->properties; pp != 0; pp = pp->next) {
- /*
- * Yet another Apple device-tree bogosity: on some machines,
- * they have properties & nodes with the same name. Those
- * properties are quite unimportant for us though, thus we
- * simply "skip" them here, but we do have to check.
- */
- spin_lock(&proc_subdir_lock);
- for (ent = de->subdir; ent != NULL; ent = ent->next)
- if (!strcmp(ent->name, pp->name))
- break;
- spin_unlock(&proc_subdir_lock);
- if (ent != NULL) {
- printk(KERN_WARNING "device-tree: property \"%s\" name"
- " conflicts with node in %s\n", pp->name,
- np->full_name);
- continue;
- }
- ent = __proc_device_tree_add_prop(de, pp);
+ for (pp = np->properties; pp != 0; pp = pp->next) {
+ p = pp->name;
+
+ if (duplicate_name(de, p))
+ p = fixup_name(np, de, p);
+
+ ent = __proc_device_tree_add_prop(de, pp, p);
if (ent == 0)
break;
}
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index ef5a332..5c10ea1 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -249,155 +249,64 @@
return seq_open(file, &cpuinfo_op);
}
-enum devinfo_states {
- CHR_HDR,
- CHR_LIST,
- BLK_HDR,
- BLK_LIST,
- DEVINFO_DONE
-};
-
-struct devinfo_state {
- void *chrdev;
- void *blkdev;
- unsigned int num_records;
- unsigned int cur_record;
- enum devinfo_states state;
-};
-
-static void *devinfo_start(struct seq_file *f, loff_t *pos)
-{
- struct devinfo_state *info = f->private;
-
- if (*pos) {
- if ((info) && (*pos <= info->num_records))
- return info;
- return NULL;
- }
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- f->private = info;
- info->chrdev = acquire_chrdev_list();
- info->blkdev = acquire_blkdev_list();
- info->state = CHR_HDR;
- info->num_records = count_chrdev_list();
- info->num_records += count_blkdev_list();
- info->num_records += 2; /* Character and Block headers */
- *pos = 1;
- info->cur_record = *pos;
- return info;
-}
-
-static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
-{
- int idummy;
- char *ndummy;
- struct devinfo_state *info = f->private;
-
- switch (info->state) {
- case CHR_HDR:
- info->state = CHR_LIST;
- (*pos)++;
- /*fallthrough*/
- case CHR_LIST:
- if (get_chrdev_info(info->chrdev,&idummy,&ndummy)) {
- /*
- * The character dev list is complete
- */
- info->state = BLK_HDR;
- } else {
- info->chrdev = get_next_chrdev(info->chrdev);
- }
- (*pos)++;
- break;
- case BLK_HDR:
- info->state = BLK_LIST;
- (*pos)++;
- /*fallthrough*/
- case BLK_LIST:
- if (get_blkdev_info(info->blkdev,&idummy,&ndummy)) {
- /*
- * The block dev list is complete
- */
- info->state = DEVINFO_DONE;
- } else {
- info->blkdev = get_next_blkdev(info->blkdev);
- }
- (*pos)++;
- break;
- case DEVINFO_DONE:
- (*pos)++;
- info->cur_record = *pos;
- info = NULL;
- break;
- default:
- break;
- }
- if (info)
- info->cur_record = *pos;
- return info;
-}
-
-static void devinfo_stop(struct seq_file *f, void *v)
-{
- struct devinfo_state *info = f->private;
-
- if (info) {
- release_chrdev_list(info->chrdev);
- release_blkdev_list(info->blkdev);
- f->private = NULL;
- kfree(info);
- }
-}
-
-static int devinfo_show(struct seq_file *f, void *arg)
-{
- int major;
- char *name;
- struct devinfo_state *info = f->private;
-
- switch(info->state) {
- case CHR_HDR:
- seq_printf(f,"Character devices:\n");
- /* fallthrough */
- case CHR_LIST:
- if (!get_chrdev_info(info->chrdev,&major,&name))
- seq_printf(f,"%3d %s\n",major,name);
- break;
- case BLK_HDR:
- seq_printf(f,"\nBlock devices:\n");
- /* fallthrough */
- case BLK_LIST:
- if (!get_blkdev_info(info->blkdev,&major,&name))
- seq_printf(f,"%3d %s\n",major,name);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-static struct seq_operations devinfo_op = {
- .start = devinfo_start,
- .next = devinfo_next,
- .stop = devinfo_stop,
- .show = devinfo_show,
-};
-
-static int devinfo_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &devinfo_op);
-}
-
-static struct file_operations proc_devinfo_operations = {
- .open = devinfo_open,
+static struct file_operations proc_cpuinfo_operations = {
+ .open = cpuinfo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
-static struct file_operations proc_cpuinfo_operations = {
- .open = cpuinfo_open,
+static int devinfo_show(struct seq_file *f, void *v)
+{
+ int i = *(loff_t *) v;
+
+ if (i < CHRDEV_MAJOR_HASH_SIZE) {
+ if (i == 0)
+ seq_printf(f, "Character devices:\n");
+ chrdev_show(f, i);
+ } else {
+ i -= CHRDEV_MAJOR_HASH_SIZE;
+ if (i == 0)
+ seq_printf(f, "\nBlock devices:\n");
+ blkdev_show(f, i);
+ }
+ return 0;
+}
+
+static void *devinfo_start(struct seq_file *f, loff_t *pos)
+{
+ if (*pos < (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+ return pos;
+ return NULL;
+}
+
+static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
+{
+ (*pos)++;
+ if (*pos >= (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+ return NULL;
+ return pos;
+}
+
+static void devinfo_stop(struct seq_file *f, void *v)
+{
+ /* Nothing to do */
+}
+
+static struct seq_operations devinfo_ops = {
+ .start = devinfo_start,
+ .next = devinfo_next,
+ .stop = devinfo_stop,
+ .show = devinfo_show
+};
+
+static int devinfo_open(struct inode *inode, struct file *filp)
+{
+ return seq_open(filp, &devinfo_ops);
+}
+
+static struct file_operations proc_devinfo_operations = {
+ .open = devinfo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index 010094d1..cf6e1cf 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -1576,6 +1576,8 @@
.sendfile = generic_file_sendfile,
.aio_read = generic_file_aio_read,
.aio_write = reiserfs_aio_write,
+ .splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
};
struct inode_operations reiserfs_file_inode_operations = {
diff --git a/fs/select.c b/fs/select.c
index b3a3a13..071660f 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -314,7 +314,7 @@
int ret, size, max_fdset;
struct fdtable *fdt;
/* Allocate small arguments on the stack to save memory and be faster */
- char stack_fds[SELECT_STACK_ALLOC];
+ long stack_fds[SELECT_STACK_ALLOC/sizeof(long)];
ret = -EINVAL;
if (n < 0)
@@ -639,8 +639,10 @@
struct poll_list *walk;
struct fdtable *fdt;
int max_fdset;
- /* Allocate small arguments on the stack to save memory and be faster */
- char stack_pps[POLL_STACK_ALLOC];
+ /* Allocate small arguments on the stack to save memory and be
+ faster - use long to make sure the buffer is aligned properly
+ on 64 bit archs to avoid unaligned access */
+ long stack_pps[POLL_STACK_ALLOC/sizeof(long)];
struct poll_list *stack_pp = NULL;
/* Do a sanity check on nfds ... */
diff --git a/fs/splice.c b/fs/splice.c
new file mode 100644
index 0000000..7c2bbf1
--- /dev/null
+++ b/fs/splice.c
@@ -0,0 +1,663 @@
+/*
+ * "splice": joining two ropes together by interweaving their strands.
+ *
+ * This is the "extended pipe" functionality, where a pipe is used as
+ * an arbitrary in-memory buffer. Think of a pipe as a small kernel
+ * buffer that you can use to transfer data from one end to the other.
+ *
+ * The traditional unix read/write is extended with a "splice()" operation
+ * that transfers data buffers to or from a pipe buffer.
+ *
+ * Named by Larry McVoy, original implementation from Linus, extended by
+ * Jens to support splicing to files and fixing the initial implementation
+ * bugs.
+ *
+ * Copyright (C) 2005 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2005 Linus Torvalds <torvalds@osdl.org>
+ *
+ */
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/pagemap.h>
+#include <linux/pipe_fs_i.h>
+#include <linux/mm_inline.h>
+#include <linux/swap.h>
+#include <linux/module.h>
+
+/*
+ * Passed to the actors
+ */
+struct splice_desc {
+ unsigned int len, total_len; /* current and remaining length */
+ unsigned int flags; /* splice flags */
+ struct file *file; /* file to read/write */
+ loff_t pos; /* file position */
+};
+
+static int page_cache_pipe_buf_steal(struct pipe_inode_info *info,
+ struct pipe_buffer *buf)
+{
+ struct page *page = buf->page;
+
+ WARN_ON(!PageLocked(page));
+ WARN_ON(!PageUptodate(page));
+
+ if (!remove_mapping(page_mapping(page), page))
+ return 1;
+
+ if (PageLRU(page)) {
+ struct zone *zone = page_zone(page);
+
+ spin_lock_irq(&zone->lru_lock);
+ BUG_ON(!PageLRU(page));
+ __ClearPageLRU(page);
+ del_page_from_lru(zone, page);
+ spin_unlock_irq(&zone->lru_lock);
+ }
+
+ buf->stolen = 1;
+ return 0;
+}
+
+static void page_cache_pipe_buf_release(struct pipe_inode_info *info,
+ struct pipe_buffer *buf)
+{
+ page_cache_release(buf->page);
+ buf->page = NULL;
+ buf->stolen = 0;
+}
+
+static void *page_cache_pipe_buf_map(struct file *file,
+ struct pipe_inode_info *info,
+ struct pipe_buffer *buf)
+{
+ struct page *page = buf->page;
+
+ lock_page(page);
+
+ if (!PageUptodate(page)) {
+ unlock_page(page);
+ return ERR_PTR(-EIO);
+ }
+
+ if (!page->mapping) {
+ unlock_page(page);
+ return ERR_PTR(-ENODATA);
+ }
+
+ return kmap(buf->page);
+}
+
+static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info,
+ struct pipe_buffer *buf)
+{
+ if (!buf->stolen)
+ unlock_page(buf->page);
+ kunmap(buf->page);
+}
+
+static struct pipe_buf_operations page_cache_pipe_buf_ops = {
+ .can_merge = 0,
+ .map = page_cache_pipe_buf_map,
+ .unmap = page_cache_pipe_buf_unmap,
+ .release = page_cache_pipe_buf_release,
+ .steal = page_cache_pipe_buf_steal,
+};
+
+static ssize_t move_to_pipe(struct inode *inode, struct page **pages,
+ int nr_pages, unsigned long offset,
+ unsigned long len)
+{
+ struct pipe_inode_info *info;
+ int ret, do_wakeup, i;
+
+ ret = 0;
+ do_wakeup = 0;
+ i = 0;
+
+ mutex_lock(PIPE_MUTEX(*inode));
+
+ info = inode->i_pipe;
+ for (;;) {
+ int bufs;
+
+ if (!PIPE_READERS(*inode)) {
+ send_sig(SIGPIPE, current, 0);
+ if (!ret)
+ ret = -EPIPE;
+ break;
+ }
+
+ bufs = info->nrbufs;
+ if (bufs < PIPE_BUFFERS) {
+ int newbuf = (info->curbuf + bufs) & (PIPE_BUFFERS - 1);
+ struct pipe_buffer *buf = info->bufs + newbuf;
+ struct page *page = pages[i++];
+ unsigned long this_len;
+
+ this_len = PAGE_CACHE_SIZE - offset;
+ if (this_len > len)
+ this_len = len;
+
+ buf->page = page;
+ buf->offset = offset;
+ buf->len = this_len;
+ buf->ops = &page_cache_pipe_buf_ops;
+ info->nrbufs = ++bufs;
+ do_wakeup = 1;
+
+ ret += this_len;
+ len -= this_len;
+ offset = 0;
+ if (!--nr_pages)
+ break;
+ if (!len)
+ break;
+ if (bufs < PIPE_BUFFERS)
+ continue;
+
+ break;
+ }
+
+ if (signal_pending(current)) {
+ if (!ret)
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ if (do_wakeup) {
+ wake_up_interruptible_sync(PIPE_WAIT(*inode));
+ kill_fasync(PIPE_FASYNC_READERS(*inode), SIGIO,
+ POLL_IN);
+ do_wakeup = 0;
+ }
+
+ PIPE_WAITING_WRITERS(*inode)++;
+ pipe_wait(inode);
+ PIPE_WAITING_WRITERS(*inode)--;
+ }
+
+ mutex_unlock(PIPE_MUTEX(*inode));
+
+ if (do_wakeup) {
+ wake_up_interruptible(PIPE_WAIT(*inode));
+ kill_fasync(PIPE_FASYNC_READERS(*inode), SIGIO, POLL_IN);
+ }
+
+ while (i < nr_pages)
+ page_cache_release(pages[i++]);
+
+ return ret;
+}
+
+static int __generic_file_splice_read(struct file *in, struct inode *pipe,
+ size_t len)
+{
+ struct address_space *mapping = in->f_mapping;
+ unsigned int offset, nr_pages;
+ struct page *pages[PIPE_BUFFERS], *shadow[PIPE_BUFFERS];
+ struct page *page;
+ pgoff_t index, pidx;
+ int i, j;
+
+ index = in->f_pos >> PAGE_CACHE_SHIFT;
+ offset = in->f_pos & ~PAGE_CACHE_MASK;
+ nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+ if (nr_pages > PIPE_BUFFERS)
+ nr_pages = PIPE_BUFFERS;
+
+ /*
+ * initiate read-ahead on this page range
+ */
+ do_page_cache_readahead(mapping, in, index, nr_pages);
+
+ /*
+ * Get as many pages from the page cache as possible..
+ * Start IO on the page cache entries we create (we
+ * can assume that any pre-existing ones we find have
+ * already had IO started on them).
+ */
+ i = find_get_pages(mapping, index, nr_pages, pages);
+
+ /*
+ * common case - we found all pages and they are contiguous,
+ * kick them off
+ */
+ if (i && (pages[i - 1]->index == index + i - 1))
+ goto splice_them;
+
+ /*
+ * fill shadow[] with pages at the right locations, so we only
+ * have to fill holes
+ */
+ memset(shadow, 0, i * sizeof(struct page *));
+ for (j = 0, pidx = index; j < i; pidx++, j++)
+ shadow[pages[j]->index - pidx] = pages[j];
+
+ /*
+ * now fill in the holes
+ */
+ for (i = 0, pidx = index; i < nr_pages; pidx++, i++) {
+ int error;
+
+ if (shadow[i])
+ continue;
+
+ /*
+ * no page there, look one up / create it
+ */
+ page = find_or_create_page(mapping, pidx,
+ mapping_gfp_mask(mapping));
+ if (!page)
+ break;
+
+ if (PageUptodate(page))
+ unlock_page(page);
+ else {
+ error = mapping->a_ops->readpage(in, page);
+
+ if (unlikely(error)) {
+ page_cache_release(page);
+ break;
+ }
+ }
+ shadow[i] = page;
+ }
+
+ if (!i) {
+ for (i = 0; i < nr_pages; i++) {
+ if (shadow[i])
+ page_cache_release(shadow[i]);
+ }
+ return 0;
+ }
+
+ memcpy(pages, shadow, i * sizeof(struct page *));
+
+ /*
+ * Now we splice them into the pipe..
+ */
+splice_them:
+ return move_to_pipe(pipe, pages, i, offset, len);
+}
+
+ssize_t generic_file_splice_read(struct file *in, struct inode *pipe,
+ size_t len, unsigned int flags)
+{
+ ssize_t spliced;
+ int ret;
+
+ ret = 0;
+ spliced = 0;
+ while (len) {
+ ret = __generic_file_splice_read(in, pipe, len);
+
+ if (ret <= 0)
+ break;
+
+ in->f_pos += ret;
+ len -= ret;
+ spliced += ret;
+ }
+
+ if (spliced)
+ return spliced;
+
+ return ret;
+}
+
+/*
+ * Send 'len' bytes to socket from 'file' at position 'pos' using sendpage().
+ */
+static int pipe_to_sendpage(struct pipe_inode_info *info,
+ struct pipe_buffer *buf, struct splice_desc *sd)
+{
+ struct file *file = sd->file;
+ loff_t pos = sd->pos;
+ unsigned int offset;
+ ssize_t ret;
+ void *ptr;
+
+ /*
+ * sub-optimal, but we are limited by the pipe ->map. we don't
+ * need a kmap'ed buffer here, we just want to make sure we
+ * have the page pinned if the pipe page originates from the
+ * page cache
+ */
+ ptr = buf->ops->map(file, info, buf);
+ if (IS_ERR(ptr))
+ return PTR_ERR(ptr);
+
+ offset = pos & ~PAGE_CACHE_MASK;
+
+ ret = file->f_op->sendpage(file, buf->page, offset, sd->len, &pos,
+ sd->len < sd->total_len);
+
+ buf->ops->unmap(info, buf);
+ if (ret == sd->len)
+ return 0;
+
+ return -EIO;
+}
+
+/*
+ * This is a little more tricky than the file -> pipe splicing. There are
+ * basically three cases:
+ *
+ * - Destination page already exists in the address space and there
+ * are users of it. For that case we have no other option that
+ * copying the data. Tough luck.
+ * - Destination page already exists in the address space, but there
+ * are no users of it. Make sure it's uptodate, then drop it. Fall
+ * through to last case.
+ * - Destination page does not exist, we can add the pipe page to
+ * the page cache and avoid the copy.
+ *
+ * For now we just do the slower thing and always copy pages over, it's
+ * easier than migrating pages from the pipe to the target file. For the
+ * case of doing file | file splicing, the migrate approach had some LRU
+ * nastiness...
+ */
+static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf,
+ struct splice_desc *sd)
+{
+ struct file *file = sd->file;
+ struct address_space *mapping = file->f_mapping;
+ unsigned int offset;
+ struct page *page;
+ pgoff_t index;
+ char *src;
+ int ret;
+
+ /*
+ * after this, page will be locked and unmapped
+ */
+ src = buf->ops->map(file, info, buf);
+ if (IS_ERR(src))
+ return PTR_ERR(src);
+
+ index = sd->pos >> PAGE_CACHE_SHIFT;
+ offset = sd->pos & ~PAGE_CACHE_MASK;
+
+ /*
+ * reuse buf page, if SPLICE_F_MOVE is set
+ */
+ if (sd->flags & SPLICE_F_MOVE) {
+ if (buf->ops->steal(info, buf))
+ goto find_page;
+
+ page = buf->page;
+ if (add_to_page_cache_lru(page, mapping, index,
+ mapping_gfp_mask(mapping)))
+ goto find_page;
+ } else {
+find_page:
+ ret = -ENOMEM;
+ page = find_or_create_page(mapping, index,
+ mapping_gfp_mask(mapping));
+ if (!page)
+ goto out;
+
+ /*
+ * If the page is uptodate, it is also locked. If it isn't
+ * uptodate, we can mark it uptodate if we are filling the
+ * full page. Otherwise we need to read it in first...
+ */
+ if (!PageUptodate(page)) {
+ if (sd->len < PAGE_CACHE_SIZE) {
+ ret = mapping->a_ops->readpage(file, page);
+ if (unlikely(ret))
+ goto out;
+
+ lock_page(page);
+
+ if (!PageUptodate(page)) {
+ /*
+ * page got invalidated, repeat
+ */
+ if (!page->mapping) {
+ unlock_page(page);
+ page_cache_release(page);
+ goto find_page;
+ }
+ ret = -EIO;
+ goto out;
+ }
+ } else {
+ WARN_ON(!PageLocked(page));
+ SetPageUptodate(page);
+ }
+ }
+ }
+
+ ret = mapping->a_ops->prepare_write(file, page, 0, sd->len);
+ if (ret)
+ goto out;
+
+ if (!buf->stolen) {
+ char *dst = kmap_atomic(page, KM_USER0);
+
+ memcpy(dst + offset, src + buf->offset, sd->len);
+ flush_dcache_page(page);
+ kunmap_atomic(dst, KM_USER0);
+ }
+
+ ret = mapping->a_ops->commit_write(file, page, 0, sd->len);
+ if (ret < 0)
+ goto out;
+
+ set_page_dirty(page);
+ ret = write_one_page(page, 0);
+out:
+ if (ret < 0)
+ unlock_page(page);
+ if (!buf->stolen)
+ page_cache_release(page);
+ buf->ops->unmap(info, buf);
+ return ret;
+}
+
+typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
+ struct splice_desc *);
+
+static ssize_t move_from_pipe(struct inode *inode, struct file *out,
+ size_t len, unsigned int flags,
+ splice_actor *actor)
+{
+ struct pipe_inode_info *info;
+ int ret, do_wakeup, err;
+ struct splice_desc sd;
+
+ ret = 0;
+ do_wakeup = 0;
+
+ sd.total_len = len;
+ sd.flags = flags;
+ sd.file = out;
+ sd.pos = out->f_pos;
+
+ mutex_lock(PIPE_MUTEX(*inode));
+
+ info = inode->i_pipe;
+ for (;;) {
+ int bufs = info->nrbufs;
+
+ if (bufs) {
+ int curbuf = info->curbuf;
+ struct pipe_buffer *buf = info->bufs + curbuf;
+ struct pipe_buf_operations *ops = buf->ops;
+
+ sd.len = buf->len;
+ if (sd.len > sd.total_len)
+ sd.len = sd.total_len;
+
+ err = actor(info, buf, &sd);
+ if (err) {
+ if (!ret && err != -ENODATA)
+ ret = err;
+
+ break;
+ }
+
+ ret += sd.len;
+ buf->offset += sd.len;
+ buf->len -= sd.len;
+ if (!buf->len) {
+ buf->ops = NULL;
+ ops->release(info, buf);
+ curbuf = (curbuf + 1) & (PIPE_BUFFERS - 1);
+ info->curbuf = curbuf;
+ info->nrbufs = --bufs;
+ do_wakeup = 1;
+ }
+
+ sd.pos += sd.len;
+ sd.total_len -= sd.len;
+ if (!sd.total_len)
+ break;
+ }
+
+ if (bufs)
+ continue;
+ if (!PIPE_WRITERS(*inode))
+ break;
+ if (!PIPE_WAITING_WRITERS(*inode)) {
+ if (ret)
+ break;
+ }
+
+ if (signal_pending(current)) {
+ if (!ret)
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ if (do_wakeup) {
+ wake_up_interruptible_sync(PIPE_WAIT(*inode));
+ kill_fasync(PIPE_FASYNC_WRITERS(*inode),SIGIO,POLL_OUT);
+ do_wakeup = 0;
+ }
+
+ pipe_wait(inode);
+ }
+
+ mutex_unlock(PIPE_MUTEX(*inode));
+
+ if (do_wakeup) {
+ wake_up_interruptible(PIPE_WAIT(*inode));
+ kill_fasync(PIPE_FASYNC_WRITERS(*inode), SIGIO, POLL_OUT);
+ }
+
+ mutex_lock(&out->f_mapping->host->i_mutex);
+ out->f_pos = sd.pos;
+ mutex_unlock(&out->f_mapping->host->i_mutex);
+ return ret;
+
+}
+
+ssize_t generic_file_splice_write(struct inode *inode, struct file *out,
+ size_t len, unsigned int flags)
+{
+ return move_from_pipe(inode, out, len, flags, pipe_to_file);
+}
+
+ssize_t generic_splice_sendpage(struct inode *inode, struct file *out,
+ size_t len, unsigned int flags)
+{
+ return move_from_pipe(inode, out, len, flags, pipe_to_sendpage);
+}
+
+EXPORT_SYMBOL(generic_file_splice_write);
+EXPORT_SYMBOL(generic_file_splice_read);
+
+static long do_splice_from(struct inode *pipe, struct file *out, size_t len,
+ unsigned int flags)
+{
+ loff_t pos;
+ int ret;
+
+ if (!out->f_op || !out->f_op->splice_write)
+ return -EINVAL;
+
+ if (!(out->f_mode & FMODE_WRITE))
+ return -EBADF;
+
+ pos = out->f_pos;
+ ret = rw_verify_area(WRITE, out, &pos, len);
+ if (unlikely(ret < 0))
+ return ret;
+
+ return out->f_op->splice_write(pipe, out, len, flags);
+}
+
+static long do_splice_to(struct file *in, struct inode *pipe, size_t len,
+ unsigned int flags)
+{
+ loff_t pos, isize, left;
+ int ret;
+
+ if (!in->f_op || !in->f_op->splice_read)
+ return -EINVAL;
+
+ if (!(in->f_mode & FMODE_READ))
+ return -EBADF;
+
+ pos = in->f_pos;
+ ret = rw_verify_area(READ, in, &pos, len);
+ if (unlikely(ret < 0))
+ return ret;
+
+ isize = i_size_read(in->f_mapping->host);
+ if (unlikely(in->f_pos >= isize))
+ return 0;
+
+ left = isize - in->f_pos;
+ if (left < len)
+ len = left;
+
+ return in->f_op->splice_read(in, pipe, len, flags);
+}
+
+static long do_splice(struct file *in, struct file *out, size_t len,
+ unsigned int flags)
+{
+ struct inode *pipe;
+
+ pipe = in->f_dentry->d_inode;
+ if (pipe->i_pipe)
+ return do_splice_from(pipe, out, len, flags);
+
+ pipe = out->f_dentry->d_inode;
+ if (pipe->i_pipe)
+ return do_splice_to(in, pipe, len, flags);
+
+ return -EINVAL;
+}
+
+asmlinkage long sys_splice(int fdin, int fdout, size_t len, unsigned int flags)
+{
+ long error;
+ struct file *in, *out;
+ int fput_in, fput_out;
+
+ if (unlikely(!len))
+ return 0;
+
+ error = -EBADF;
+ in = fget_light(fdin, &fput_in);
+ if (in) {
+ if (in->f_mode & FMODE_READ) {
+ out = fget_light(fdout, &fput_out);
+ if (out) {
+ if (out->f_mode & FMODE_WRITE)
+ error = do_splice(in, out, len, flags);
+ fput_light(out, fput_out);
+ }
+ }
+
+ fput_light(in, fput_in);
+ }
+
+ return error;
+}
diff --git a/fs/sync.c b/fs/sync.c
new file mode 100644
index 0000000..8616006
--- /dev/null
+++ b/fs/sync.c
@@ -0,0 +1,164 @@
+/*
+ * High-level sync()-related operations
+ */
+
+#include <linux/kernel.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/writeback.h>
+#include <linux/syscalls.h>
+#include <linux/linkage.h>
+#include <linux/pagemap.h>
+
+#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
+ SYNC_FILE_RANGE_WAIT_AFTER)
+
+/*
+ * sys_sync_file_range() permits finely controlled syncing over a segment of
+ * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
+ * zero then sys_sync_file_range() will operate from offset out to EOF.
+ *
+ * The flag bits are:
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
+ * before performing the write.
+ *
+ * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
+ * range which are not presently under writeback.
+ *
+ * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
+ * after performing the write.
+ *
+ * Useful combinations of the flag bits are:
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
+ * in the range which were dirty on entry to sys_sync_file_range() are placed
+ * under writeout. This is a start-write-for-data-integrity operation.
+ *
+ * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
+ * are not presently under writeout. This is an asynchronous flush-to-disk
+ * operation. Not suitable for data integrity operations.
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
+ * completion of writeout of all pages in the range. This will be used after an
+ * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
+ * for that operation to complete and to return the result.
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
+ * a traditional sync() operation. This is a write-for-data-integrity operation
+ * which will ensure that all pages in the range which were dirty on entry to
+ * sys_sync_file_range() are committed to disk.
+ *
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
+ * I/O errors or ENOSPC conditions and will return those to the caller, after
+ * clearing the EIO and ENOSPC flags in the address_space.
+ *
+ * It should be noted that none of these operations write out the file's
+ * metadata. So unless the application is strictly performing overwrites of
+ * already-instantiated disk blocks, there are no guarantees here that the data
+ * will be available after a crash.
+ */
+asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
+ int flags)
+{
+ int ret;
+ struct file *file;
+ loff_t endbyte; /* inclusive */
+ int fput_needed;
+ umode_t i_mode;
+
+ ret = -EINVAL;
+ if (flags & ~VALID_FLAGS)
+ goto out;
+
+ endbyte = offset + nbytes;
+
+ if ((s64)offset < 0)
+ goto out;
+ if ((s64)endbyte < 0)
+ goto out;
+ if (endbyte < offset)
+ goto out;
+
+ if (sizeof(pgoff_t) == 4) {
+ if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
+ /*
+ * The range starts outside a 32 bit machine's
+ * pagecache addressing capabilities. Let it "succeed"
+ */
+ ret = 0;
+ goto out;
+ }
+ if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
+ /*
+ * Out to EOF
+ */
+ nbytes = 0;
+ }
+ }
+
+ if (nbytes == 0)
+ endbyte = -1;
+ else
+ endbyte--; /* inclusive */
+
+ ret = -EBADF;
+ file = fget_light(fd, &fput_needed);
+ if (!file)
+ goto out;
+
+ i_mode = file->f_dentry->d_inode->i_mode;
+ ret = -ESPIPE;
+ if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
+ !S_ISLNK(i_mode))
+ goto out_put;
+
+ ret = do_sync_file_range(file, offset, endbyte, flags);
+out_put:
+ fput_light(file, fput_needed);
+out:
+ return ret;
+}
+
+/*
+ * `endbyte' is inclusive
+ */
+int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
+ int flags)
+{
+ int ret;
+ struct address_space *mapping;
+
+ mapping = file->f_mapping;
+ if (!mapping) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = 0;
+ if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
+ ret = wait_on_page_writeback_range(mapping,
+ offset >> PAGE_CACHE_SHIFT,
+ endbyte >> PAGE_CACHE_SHIFT);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (flags & SYNC_FILE_RANGE_WRITE) {
+ ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
+ WB_SYNC_NONE);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (flags & SYNC_FILE_RANGE_WAIT_AFTER) {
+ ret = wait_on_page_writeback_range(mapping,
+ offset >> PAGE_CACHE_SHIFT,
+ endbyte >> PAGE_CACHE_SHIFT);
+ }
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(do_sync_file_range);
diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c
index ef46939..a56cec3 100644
--- a/fs/vfat/namei.c
+++ b/fs/vfat/namei.c
@@ -185,24 +185,6 @@
return -EINVAL;
if (len >= 256)
return -ENAMETOOLONG;
-
- /* MS-DOS "device special files" */
- if (len == 3 || (len > 3 && name[3] == '.')) { /* basename == 3 */
- if (!strnicmp(name, "aux", 3) ||
- !strnicmp(name, "con", 3) ||
- !strnicmp(name, "nul", 3) ||
- !strnicmp(name, "prn", 3))
- return -EINVAL;
- }
- if (len == 4 || (len > 4 && name[4] == '.')) { /* basename == 4 */
- /* "com1", "com2", ... */
- if ('1' <= name[3] && name[3] <= '9') {
- if (!strnicmp(name, "com", 3) ||
- !strnicmp(name, "lpt", 3))
- return -EINVAL;
- }
- }
-
return 0;
}
diff --git a/fs/xfs/linux-2.6/mrlock.h b/fs/xfs/linux-2.6/mrlock.h
index 16b44c3..1b262b7 100644
--- a/fs/xfs/linux-2.6/mrlock.h
+++ b/fs/xfs/linux-2.6/mrlock.h
@@ -79,7 +79,7 @@
* Debug-only routine, without some platform-specific asm code, we can
* now only answer requests regarding whether we hold the lock for write
* (reader state is outside our visibility, we only track writer state).
- * Note: means !ismrlocked would give false positivies, so don't do that.
+ * Note: means !ismrlocked would give false positives, so don't do that.
*/
static inline int ismrlocked(mrlock_t *mrp, int type)
{
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c02f7c5..6cbbd16 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -372,7 +372,7 @@
* assumes that all buffers on the page are started at the same time.
*
* The fix is two passes across the ioend list - one to start writeback on the
- * bufferheads, and then the second one submit them for I/O.
+ * buffer_heads, and then submit them for I/O on the second pass.
*/
STATIC void
xfs_submit_ioend(
@@ -699,7 +699,7 @@
/*
* page_dirty is initially a count of buffers on the page before
- * EOF and is decrememted as we move each into a cleanable state.
+ * EOF and is decremented as we move each into a cleanable state.
*
* Derivation:
*
@@ -842,7 +842,7 @@
* page if possible.
* The bh->b_state's cannot know if any of the blocks or which block for
* that matter are dirty due to mmap writes, and therefore bh uptodate is
- * only vaild if the page itself isn't completely uptodate. Some layers
+ * only valid if the page itself isn't completely uptodate. Some layers
* may clear the page dirty flag prior to calling write page, under the
* assumption the entire page will be written out; by not writing out the
* whole page the page can be reused before all valid dirty data is
@@ -892,7 +892,7 @@
/*
* page_dirty is initially a count of buffers on the page before
- * EOF and is decrememted as we move each into a cleanable state.
+ * EOF and is decremented as we move each into a cleanable state.
*
* Derivation:
*
@@ -1223,10 +1223,9 @@
}
STATIC int
-__xfs_get_block(
+__xfs_get_blocks(
struct inode *inode,
sector_t iblock,
- unsigned long blocks,
struct buffer_head *bh_result,
int create,
int direct,
@@ -1236,22 +1235,17 @@
xfs_iomap_t iomap;
xfs_off_t offset;
ssize_t size;
- int retpbbm = 1;
+ int niomap = 1;
int error;
offset = (xfs_off_t)iblock << inode->i_blkbits;
- if (blocks)
- size = (ssize_t) min_t(xfs_off_t, LONG_MAX,
- (xfs_off_t)blocks << inode->i_blkbits);
- else
- size = 1 << inode->i_blkbits;
-
+ ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
+ size = bh_result->b_size;
VOP_BMAP(vp, offset, size,
- create ? flags : BMAPI_READ, &iomap, &retpbbm, error);
+ create ? flags : BMAPI_READ, &iomap, &niomap, error);
if (error)
return -error;
-
- if (retpbbm == 0)
+ if (niomap == 0)
return 0;
if (iomap.iomap_bn != IOMAP_DADDR_NULL) {
@@ -1271,12 +1265,16 @@
}
}
- /* If this is a realtime file, data might be on a new device */
+ /*
+ * If this is a realtime file, data may be on a different device.
+ * to that pointed to from the buffer_head b_bdev currently.
+ */
bh_result->b_bdev = iomap.iomap_target->bt_bdev;
- /* If we previously allocated a block out beyond eof and
- * we are now coming back to use it then we will need to
- * flag it as new even if it has a disk address.
+ /*
+ * If we previously allocated a block out beyond eof and we are
+ * now coming back to use it then we will need to flag it as new
+ * even if it has a disk address.
*/
if (create &&
((!buffer_mapped(bh_result) && !buffer_uptodate(bh_result)) ||
@@ -1292,26 +1290,24 @@
}
}
- if (blocks) {
+ if (direct || size > (1 << inode->i_blkbits)) {
ASSERT(iomap.iomap_bsize - iomap.iomap_delta > 0);
offset = min_t(xfs_off_t,
- iomap.iomap_bsize - iomap.iomap_delta,
- (xfs_off_t)blocks << inode->i_blkbits);
- bh_result->b_size = (u32) min_t(xfs_off_t, UINT_MAX, offset);
+ iomap.iomap_bsize - iomap.iomap_delta, size);
+ bh_result->b_size = (ssize_t)min_t(xfs_off_t, LONG_MAX, offset);
}
return 0;
}
int
-xfs_get_block(
+xfs_get_blocks(
struct inode *inode,
sector_t iblock,
struct buffer_head *bh_result,
int create)
{
- return __xfs_get_block(inode, iblock,
- bh_result->b_size >> inode->i_blkbits,
+ return __xfs_get_blocks(inode, iblock,
bh_result, create, 0, BMAPI_WRITE);
}
@@ -1322,8 +1318,7 @@
struct buffer_head *bh_result,
int create)
{
- return __xfs_get_block(inode, iblock,
- bh_result->b_size >> inode->i_blkbits,
+ return __xfs_get_blocks(inode, iblock,
bh_result, create, 1, BMAPI_WRITE|BMAPI_DIRECT);
}
@@ -1339,9 +1334,9 @@
/*
* Non-NULL private data means we need to issue a transaction to
* convert a range from unwritten to written extents. This needs
- * to happen from process contect but aio+dio I/O completion
+ * to happen from process context but aio+dio I/O completion
* happens from irq context so we need to defer it to a workqueue.
- * This is not nessecary for synchronous direct I/O, but we do
+ * This is not necessary for synchronous direct I/O, but we do
* it anyway to keep the code uniform and simpler.
*
* The core direct I/O code might be changed to always call the
@@ -1358,7 +1353,7 @@
}
/*
- * blockdev_direct_IO can return an error even afer the I/O
+ * blockdev_direct_IO can return an error even after the I/O
* completion handler was called. Thus we need to protect
* against double-freeing.
*/
@@ -1405,7 +1400,7 @@
unsigned int from,
unsigned int to)
{
- return block_prepare_write(page, from, to, xfs_get_block);
+ return block_prepare_write(page, from, to, xfs_get_blocks);
}
STATIC sector_t
@@ -1422,7 +1417,7 @@
VOP_RWLOCK(vp, VRWLOCK_READ);
VOP_FLUSH_PAGES(vp, (xfs_off_t)0, -1, 0, FI_REMAPF, error);
VOP_RWUNLOCK(vp, VRWLOCK_READ);
- return generic_block_bmap(mapping, block, xfs_get_block);
+ return generic_block_bmap(mapping, block, xfs_get_blocks);
}
STATIC int
@@ -1430,7 +1425,7 @@
struct file *unused,
struct page *page)
{
- return mpage_readpage(page, xfs_get_block);
+ return mpage_readpage(page, xfs_get_blocks);
}
STATIC int
@@ -1440,7 +1435,7 @@
struct list_head *pages,
unsigned nr_pages)
{
- return mpage_readpages(mapping, pages, nr_pages, xfs_get_block);
+ return mpage_readpages(mapping, pages, nr_pages, xfs_get_blocks);
}
STATIC void
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 795699f..6071654 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -41,6 +41,6 @@
} xfs_ioend_t;
extern struct address_space_operations xfs_address_space_operations;
-extern int xfs_get_block(struct inode *, sector_t, struct buffer_head *, int);
+extern int xfs_get_blocks(struct inode *, sector_t, struct buffer_head *, int);
#endif /* __XFS_IOPS_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_export.h b/fs/xfs/linux-2.6/xfs_export.h
index e5b0559..e794ca4 100644
--- a/fs/xfs/linux-2.6/xfs_export.h
+++ b/fs/xfs/linux-2.6/xfs_export.h
@@ -54,7 +54,7 @@
* Note, the NFS filehandle also includes an fsid portion which
* may have an inode number in it. That number is hardcoded to
* 32bits and there is no way for XFS to intercept it. In
- * practice this means when exporting an XFS filesytem with 64bit
+ * practice this means when exporting an XFS filesystem with 64bit
* inodes you should either export the mountpoint (rather than
* a subdirectory) or use the "fsid" export option.
*/
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index b6321ab..251bfe4 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -72,7 +72,7 @@
copy_in_user(&p->l_pid, &p32->l_pid, sizeof(u32)) ||
copy_in_user(&p->l_pad, &p32->l_pad, 4*sizeof(u32)))
return -EFAULT;
-
+
return (unsigned long)p;
}
@@ -107,11 +107,15 @@
#endif
STATIC long
-xfs_compat_ioctl(int mode, struct file *f, unsigned cmd, unsigned long arg)
+xfs_compat_ioctl(
+ int mode,
+ struct file *file,
+ unsigned cmd,
+ unsigned long arg)
{
+ struct inode *inode = file->f_dentry->d_inode;
+ vnode_t *vp = vn_from_inode(inode);
int error;
- struct inode *inode = f->f_dentry->d_inode;
- vnode_t *vp = vn_to_inode(inode);
switch (cmd) {
case XFS_IOC_DIOINFO:
@@ -189,7 +193,7 @@
return -ENOIOCTLCMD;
}
- VOP_IOCTL(vp, inode, f, mode, cmd, (void __user *)arg, error);
+ VOP_IOCTL(vp, inode, file, mode, cmd, (void __user *)arg, error);
VMODIFY(vp);
return error;
@@ -197,18 +201,18 @@
long
xfs_file_compat_ioctl(
- struct file *f,
+ struct file *file,
unsigned cmd,
unsigned long arg)
{
- return xfs_compat_ioctl(0, f, cmd, arg);
+ return xfs_compat_ioctl(0, file, cmd, arg);
}
long
xfs_file_compat_invis_ioctl(
- struct file *f,
+ struct file *file,
unsigned cmd,
unsigned long arg)
{
- return xfs_compat_ioctl(IO_INVIS, f, cmd, arg);
+ return xfs_compat_ioctl(IO_INVIS, file, cmd, arg);
}
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index af48743..1492373 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -708,7 +708,7 @@
xfs_vn_truncate(
struct inode *inode)
{
- block_truncate_page(inode->i_mapping, inode->i_size, xfs_get_block);
+ block_truncate_page(inode->i_mapping, inode->i_size, xfs_get_blocks);
}
STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 0169360..84ddf18 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -681,7 +681,7 @@
eventsent = 1;
/*
- * The iolock was dropped and reaquired in XFS_SEND_DATA
+ * The iolock was dropped and reacquired in XFS_SEND_DATA
* so we have to recheck the size when appending.
* We will only "goto start;" once, since having sent the
* event prevents another call to XFS_SEND_DATA, which is
diff --git a/fs/xfs/linux-2.6/xfs_vfs.h b/fs/xfs/linux-2.6/xfs_vfs.h
index 8fed356..841200c 100644
--- a/fs/xfs/linux-2.6/xfs_vfs.h
+++ b/fs/xfs/linux-2.6/xfs_vfs.h
@@ -92,7 +92,7 @@
#define SYNC_FSDATA 0x0020 /* flush fs data (e.g. superblocks) */
#define SYNC_REFCACHE 0x0040 /* prune some of the nfs ref cache */
#define SYNC_REMOUNT 0x0080 /* remount readonly, no dummy LRs */
-#define SYNC_QUIESCE 0x0100 /* quiesce fileystem for a snapshot */
+#define SYNC_QUIESCE 0x0100 /* quiesce filesystem for a snapshot */
typedef int (*vfs_mount_t)(bhv_desc_t *,
struct xfs_mount_args *, struct cred *);
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index e4e5f05..546f48a 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -221,7 +221,7 @@
* as possible.
*
* We must not be holding the AIL_LOCK at this point. Calling incore() to
- * search the buffercache can be a time consuming thing, and AIL_LOCK is a
+ * search the buffer cache can be a time consuming thing, and AIL_LOCK is a
* spinlock.
*/
STATIC void
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 1fb757e..73c1e5e 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -289,7 +289,7 @@
/*
* This is called at mount time from xfs_mountfs to initialize the quotainfo
- * structure and start the global quotamanager (xfs_Gqm) if it hasn't done
+ * structure and start the global quota manager (xfs_Gqm) if it hasn't done
* so already. Note that the superblock has not been read in yet.
*/
void
@@ -807,7 +807,7 @@
* Given a udquot and gdquot, attach a ptr to the group dquot in the
* udquot as a hint for future lookups. The idea sounds simple, but the
* execution isn't, because the udquot might have a group dquot attached
- * already and getting rid of that gets us into lock ordering contraints.
+ * already and getting rid of that gets us into lock ordering constraints.
* The process is complicated more by the fact that the dquots may or may not
* be locked on entry.
*/
@@ -1094,10 +1094,10 @@
}
/*
* If we can't grab the flush lock then if the caller
- * really wanted us to give this our best shot,
+ * really wanted us to give this our best shot, so
* see if we can give a push to the buffer before we wait
* on the flush lock. At this point, we know that
- * eventhough the dquot is being flushed,
+ * even though the dquot is being flushed,
* it has (new) dirty data.
*/
xfs_qm_dqflock_pushbuf_wait(dqp);
@@ -1491,7 +1491,7 @@
/*
* Do a sanity check, and if needed, repair the dqblk. Don't
* output any warnings because it's perfectly possible to
- * find unitialized dquot blks. See comment in xfs_qm_dqcheck.
+ * find uninitialised dquot blks. See comment in xfs_qm_dqcheck.
*/
(void) xfs_qm_dqcheck(ddq, id+j, type, XFS_QMOPT_DQREPAIR,
"xfs_quotacheck");
@@ -1580,7 +1580,7 @@
error = 0;
/*
- * This looks racey, but we can't keep an inode lock across a
+ * This looks racy, but we can't keep an inode lock across a
* trans_reserve. But, this gets called during quotacheck, and that
* happens only at mount time which is single threaded.
*/
@@ -1824,7 +1824,7 @@
* we have to start from the beginning anyway.
* Once we're done, we'll log all the dquot bufs.
*
- * The *QUOTA_ON checks below may look pretty racey, but quotachecks
+ * The *QUOTA_ON checks below may look pretty racy, but quotachecks
* and quotaoffs don't race. (Quotachecks happen at mount time only).
*/
if (XFS_IS_UQUOTA_ON(mp)) {
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 6768843..c55db46 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -912,7 +912,7 @@
/*
* Internally, we don't reset all the timers when quota enforcement
- * gets turned off. No need to confuse the userlevel code,
+ * gets turned off. No need to confuse the user level code,
* so return zeroes in that case.
*/
if (! XFS_IS_QUOTA_ENFORCED(mp)) {
diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/quota/xfs_trans_dquot.c
index 3290975..d8e131e 100644
--- a/fs/xfs/quota/xfs_trans_dquot.c
+++ b/fs/xfs/quota/xfs_trans_dquot.c
@@ -804,7 +804,7 @@
}
/*
- * Didnt change anything critical, so, no need to log
+ * Didn't change anything critical, so, no need to log
*/
return (0);
}
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
index 4ff0f4e..2539af3 100644
--- a/fs/xfs/xfs_acl.c
+++ b/fs/xfs/xfs_acl.c
@@ -395,7 +395,7 @@
* The access control process to determine the access permission:
* if uid == file owner id, use the file owner bits.
* if gid == file owner group id, use the file group bits.
- * scan ACL for a maching user or group, and use matched entry
+ * scan ACL for a matching user or group, and use matched entry
* permission. Use total permissions of all matching group entries,
* until all acl entries are exhausted. The final permission produced
* by matching acl entry or entries needs to be & with group permission.
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index a96e2ff..dc2361d 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -179,7 +179,7 @@
{
char pagf_init; /* this agf's entry is initialized */
char pagi_init; /* this agi's entry is initialized */
- char pagf_metadata; /* the agf is prefered to be metadata */
+ char pagf_metadata; /* the agf is preferred to be metadata */
char pagi_inodeok; /* The agi is ok for inodes */
__uint8_t pagf_levels[XFS_BTNUM_AGF];
/* # of levels in bno & cnt btree */
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index f4328e1..64ee07d 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -511,7 +511,7 @@
xfs_alloc_trace_busy(
char *name, /* function tag string */
char *str, /* additional string */
- xfs_mount_t *mp, /* file system mount poing */
+ xfs_mount_t *mp, /* file system mount point */
xfs_agnumber_t agno, /* allocation group number */
xfs_agblock_t agbno, /* a.g. relative block number */
xfs_extlen_t len, /* length of extent */
@@ -1843,7 +1843,7 @@
} else
agbp = NULL;
- /* If this is a metadata prefered pag and we are user data
+ /* If this is a metadata preferred pag and we are user data
* then try somewhere else if we are not being asked to
* try harder at this point
*/
@@ -2458,7 +2458,7 @@
/*
* AG Busy list management
* The busy list contains block ranges that have been freed but whose
- * transacations have not yet hit disk. If any block listed in a busy
+ * transactions have not yet hit disk. If any block listed in a busy
* list is reused, the transaction that freed it must be forced to disk
* before continuing to use the block.
*
diff --git a/fs/xfs/xfs_alloc.h b/fs/xfs/xfs_alloc.h
index 3546dea..2d1f892 100644
--- a/fs/xfs/xfs_alloc.h
+++ b/fs/xfs/xfs_alloc.h
@@ -68,7 +68,7 @@
xfs_alloctype_t otype; /* original allocation type */
char wasdel; /* set if allocation was prev delayed */
char wasfromfl; /* set if allocation is from freelist */
- char isfl; /* set if is freelist blocks - !actg */
+ char isfl; /* set if is freelist blocks - !acctg */
char userdata; /* set if this is user data */
} xfs_alloc_arg_t;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index 093fac4..b6e1e02 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -294,7 +294,7 @@
xfs_trans_ihold(args.trans, dp);
/*
- * If the attribute list is non-existant or a shortform list,
+ * If the attribute list is non-existent or a shortform list,
* upgrade it to a single-leaf-block attribute list.
*/
if ((dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) ||
@@ -1584,7 +1584,7 @@
* Fill in the disk block numbers in the state structure for the buffers
* that are attached to the state structure.
* This is done so that we can quickly reattach ourselves to those buffers
- * after some set of transaction commit's has released these buffers.
+ * after some set of transaction commits have released these buffers.
*/
STATIC int
xfs_attr_fillstate(xfs_da_state_t *state)
@@ -1631,7 +1631,7 @@
/*
* Reattach the buffers to the state structure based on the disk block
* numbers stored in the state structure.
- * This is done after some set of transaction commit's has released those
+ * This is done after some set of transaction commits have released those
* buffers from our grip.
*/
STATIC int
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 7176827..9462be8 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -524,7 +524,7 @@
/*
* Copy out entries of shortform attribute lists for attr_list().
- * Shortform atrtribute lists are not stored in hashval sorted order.
+ * Shortform attribute lists are not stored in hashval sorted order.
* If the output buffer is not large enough to hold them all, then we
* we have to calculate each entries' hashvalue and sort them before
* we can begin returning them to the user.
@@ -1541,7 +1541,7 @@
/*
* Check for the degenerate case of the block being empty.
* If the block is empty, we'll simply delete it, no need to
- * coalesce it with a sibling block. We choose (aribtrarily)
+ * coalesce it with a sibling block. We choose (arbitrarily)
* to merge with the forward block unless it is NULL.
*/
if (count == 0) {
diff --git a/fs/xfs/xfs_behavior.c b/fs/xfs/xfs_behavior.c
index 9880ada..f4fe371 100644
--- a/fs/xfs/xfs_behavior.c
+++ b/fs/xfs/xfs_behavior.c
@@ -31,7 +31,7 @@
* The behavior chain is ordered based on the 'position' number which
* lives in the first field of the ops vector (higher numbers first).
*
- * Attemps to insert duplicate ops result in an EINVAL return code.
+ * Attempts to insert duplicate ops result in an EINVAL return code.
* Otherwise, return 0 to indicate success.
*/
int
@@ -84,7 +84,7 @@
/*
* Remove a behavior descriptor from a position in a behavior chain;
- * the postition is guaranteed not to be the first position.
+ * the position is guaranteed not to be the first position.
* Should only be called by the bhv_remove() macro.
*/
void
diff --git a/fs/xfs/xfs_behavior.h b/fs/xfs/xfs_behavior.h
index 2cd89bb..1d8ff10 100644
--- a/fs/xfs/xfs_behavior.h
+++ b/fs/xfs/xfs_behavior.h
@@ -39,7 +39,7 @@
* behaviors is synchronized with operations-in-progress (oip's) so that
* the oip's always see a consistent view of the chain.
*
- * The term "interpostion" is used to refer to the act of inserting
+ * The term "interposition" is used to refer to the act of inserting
* a behavior such that it interposes on (i.e., is inserted in front
* of) a particular other behavior. A key example of this is when a
* system implementing distributed single system image wishes to
@@ -51,7 +51,7 @@
*
* Behavior synchronization is logic which is necessary under certain
* circumstances that there is no conflict between ongoing operations
- * traversing the behavior chain and those dunamically modifying the
+ * traversing the behavior chain and those dynamically modifying the
* behavior chain. Because behavior synchronization adds extra overhead
* to virtual operation invocation, we want to restrict, as much as
* we can, the requirement for this extra code, to those situations
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 2d702e4..d384e48 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -3467,113 +3467,6 @@
return error;
}
-xfs_bmbt_rec_t * /* pointer to found extent entry */
-xfs_bmap_do_search_extents(
- xfs_bmbt_rec_t *base, /* base of extent list */
- xfs_extnum_t lastx, /* last extent index used */
- xfs_extnum_t nextents, /* number of file extents */
- xfs_fileoff_t bno, /* block number searched for */
- int *eofp, /* out: end of file found */
- xfs_extnum_t *lastxp, /* out: last extent index */
- xfs_bmbt_irec_t *gotp, /* out: extent entry found */
- xfs_bmbt_irec_t *prevp) /* out: previous extent entry found */
-{
- xfs_bmbt_rec_t *ep; /* extent list entry pointer */
- xfs_bmbt_irec_t got; /* extent list entry, decoded */
- int high; /* high index of binary search */
- int low; /* low index of binary search */
-
- /*
- * Initialize the extent entry structure to catch access to
- * uninitialized br_startblock field.
- */
- got.br_startoff = 0xffa5a5a5a5a5a5a5LL;
- got.br_blockcount = 0xa55a5a5a5a5a5a5aLL;
- got.br_state = XFS_EXT_INVALID;
-
-#if XFS_BIG_BLKNOS
- got.br_startblock = 0xffffa5a5a5a5a5a5LL;
-#else
- got.br_startblock = 0xffffa5a5;
-#endif
-
- if (lastx != NULLEXTNUM && lastx < nextents)
- ep = base + lastx;
- else
- ep = NULL;
- prevp->br_startoff = NULLFILEOFF;
- if (ep && bno >= (got.br_startoff = xfs_bmbt_get_startoff(ep)) &&
- bno < got.br_startoff +
- (got.br_blockcount = xfs_bmbt_get_blockcount(ep)))
- *eofp = 0;
- else if (ep && lastx < nextents - 1 &&
- bno >= (got.br_startoff = xfs_bmbt_get_startoff(ep + 1)) &&
- bno < got.br_startoff +
- (got.br_blockcount = xfs_bmbt_get_blockcount(ep + 1))) {
- lastx++;
- ep++;
- *eofp = 0;
- } else if (nextents == 0)
- *eofp = 1;
- else if (bno == 0 &&
- (got.br_startoff = xfs_bmbt_get_startoff(base)) == 0) {
- ep = base;
- lastx = 0;
- got.br_blockcount = xfs_bmbt_get_blockcount(ep);
- *eofp = 0;
- } else {
- low = 0;
- high = nextents - 1;
- /* binary search the extents array */
- while (low <= high) {
- XFS_STATS_INC(xs_cmp_exlist);
- lastx = (low + high) >> 1;
- ep = base + lastx;
- got.br_startoff = xfs_bmbt_get_startoff(ep);
- got.br_blockcount = xfs_bmbt_get_blockcount(ep);
- if (bno < got.br_startoff)
- high = lastx - 1;
- else if (bno >= got.br_startoff + got.br_blockcount)
- low = lastx + 1;
- else {
- got.br_startblock = xfs_bmbt_get_startblock(ep);
- got.br_state = xfs_bmbt_get_state(ep);
- *eofp = 0;
- *lastxp = lastx;
- *gotp = got;
- return ep;
- }
- }
- if (bno >= got.br_startoff + got.br_blockcount) {
- lastx++;
- if (lastx == nextents) {
- *eofp = 1;
- got.br_startblock = xfs_bmbt_get_startblock(ep);
- got.br_state = xfs_bmbt_get_state(ep);
- *prevp = got;
- ep = NULL;
- } else {
- *eofp = 0;
- xfs_bmbt_get_all(ep, prevp);
- ep++;
- got.br_startoff = xfs_bmbt_get_startoff(ep);
- got.br_blockcount = xfs_bmbt_get_blockcount(ep);
- }
- } else {
- *eofp = 0;
- if (ep > base)
- xfs_bmbt_get_all(ep - 1, prevp);
- }
- }
- if (ep) {
- got.br_startblock = xfs_bmbt_get_startblock(ep);
- got.br_state = xfs_bmbt_get_state(ep);
- }
- *lastxp = lastx;
- *gotp = got;
- return ep;
-}
-
/*
* Search the extent records for the entry containing block bno.
* If bno lies in a hole, point to the next entry. If bno lies
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 011ccaa..f83399c 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -362,14 +362,6 @@
xfs_bmap_search_multi_extents(struct xfs_ifork *, xfs_fileoff_t, int *,
xfs_extnum_t *, xfs_bmbt_irec_t *, xfs_bmbt_irec_t *);
-/*
- * Search an extent list for the extent which includes block
- * bno.
- */
-xfs_bmbt_rec_t *xfs_bmap_do_search_extents(xfs_bmbt_rec_t *,
- xfs_extnum_t, xfs_extnum_t, xfs_fileoff_t, int *,
- xfs_extnum_t *, xfs_bmbt_irec_t *, xfs_bmbt_irec_t *);
-
#endif /* __KERNEL__ */
#endif /* __XFS_BMAP_H__ */
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 07e2324..5fed156 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -98,12 +98,12 @@
}
/*
- * This function is called to verify that our caller's have logged
+ * This function is called to verify that our callers have logged
* all the bytes that they changed.
*
* It does this by comparing the original copy of the buffer stored in
* the buf log item's bli_orig array to the current copy of the buffer
- * and ensuring that all bytes which miscompare are set in the bli_logged
+ * and ensuring that all bytes which mismatch are set in the bli_logged
* array of the buf log item.
*/
STATIC void
diff --git a/fs/xfs/xfs_cap.h b/fs/xfs/xfs_cap.h
index 433ec53..d0035c6e 100644
--- a/fs/xfs/xfs_cap.h
+++ b/fs/xfs/xfs_cap.h
@@ -38,7 +38,7 @@
/*
* For Linux, we take the bitfields directly from capability.h
* and no longer attempt to keep this attribute ondisk compatible
- * with IRIX. Since this attribute is only set on exectuables,
+ * with IRIX. Since this attribute is only set on executables,
* it just doesn't make much sense to try. We do use a different
* named attribute though, to avoid confusion.
*/
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 4bae3a7..8988b90 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -840,7 +840,7 @@
/*
* Check for the degenerate case of the block being empty.
* If the block is empty, we'll simply delete it, no need to
- * coalesce it with a sibling block. We choose (aribtrarily)
+ * coalesce it with a sibling block. We choose (arbitrarily)
* to merge with the forward block unless it is NULL.
*/
if (count == 0) {
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index bd5cee6..972ded5 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -533,7 +533,7 @@
/*
* Reached the end of the block.
- * Set the offset to a nonexistent block 1 and return.
+ * Set the offset to a non-existent block 1 and return.
*/
*eofp = 1;
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index 08648b18..0f5e2f2 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -515,7 +515,7 @@
ASSERT(be32_to_cpu(leaf->ents[highstale].address) ==
XFS_DIR2_NULL_DATAPTR);
/*
- * Copy entries down to copver the stale entry
+ * Copy entries down to cover the stale entry
* and make room for the new entry.
*/
if (highstale - index > 0)
diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c
index af556f1..ac511ab 100644
--- a/fs/xfs/xfs_dir2_node.c
+++ b/fs/xfs/xfs_dir2_node.c
@@ -830,7 +830,7 @@
state->inleaf = 1;
blk2->index = 0;
cmn_err(CE_ALERT,
- "xfs_dir2_leafn_rebalance: picked the wrong leaf? reverting orignal leaf: "
+ "xfs_dir2_leafn_rebalance: picked the wrong leaf? reverting original leaf: "
"blk1->index %d\n",
blk1->index);
}
diff --git a/fs/xfs/xfs_dir_leaf.c b/fs/xfs/xfs_dir_leaf.c
index ee88751..6d71186 100644
--- a/fs/xfs/xfs_dir_leaf.c
+++ b/fs/xfs/xfs_dir_leaf.c
@@ -1341,7 +1341,7 @@
/*
* Check for the degenerate case of the block being empty.
* If the block is empty, we'll simply delete it, no need to
- * coalesce it with a sibling block. We choose (aribtrarily)
+ * coalesce it with a sibling block. We choose (arbitrarily)
* to merge with the forward block unless it is NULL.
*/
if (count == 0) {
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 56caa88..dfa3527 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -477,7 +477,7 @@
*
* xfs_reserve_blocks is called to set m_resblks
* in the in-core mount table. The number of unused reserved blocks
- * is kept in m_resbls_avail.
+ * is kept in m_resblks_avail.
*
* Reserve the requested number of blocks if available. Otherwise return
* as many as possible to satisfy the request. The actual number
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 0024892..4eeb856 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -136,7 +136,7 @@
int ninodes; /* num inodes per buf */
xfs_agino_t thisino; /* current inode number, for loop */
int version; /* inode version number to use */
- int isaligned; /* inode allocation at stripe unit */
+ int isaligned = 0; /* inode allocation at stripe unit */
/* boundary */
args.tp = tp;
@@ -152,47 +152,75 @@
return XFS_ERROR(ENOSPC);
args.minlen = args.maxlen = XFS_IALLOC_BLOCKS(args.mp);
/*
- * Set the alignment for the allocation.
- * If stripe alignment is turned on then align at stripe unit
- * boundary.
- * If the cluster size is smaller than a filesystem block
- * then we're doing I/O for inodes in filesystem block size pieces,
- * so don't need alignment anyway.
- */
- isaligned = 0;
- if (args.mp->m_sinoalign) {
- ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
- args.alignment = args.mp->m_dalign;
- isaligned = 1;
- } else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
- args.mp->m_sb.sb_inoalignmt >=
- XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp)))
- args.alignment = args.mp->m_sb.sb_inoalignmt;
- else
- args.alignment = 1;
+ * First try to allocate inodes contiguous with the last-allocated
+ * chunk of inodes. If the filesystem is striped, this will fill
+ * an entire stripe unit with inodes.
+ */
agi = XFS_BUF_TO_AGI(agbp);
- /*
- * Need to figure out where to allocate the inode blocks.
- * Ideally they should be spaced out through the a.g.
- * For now, just allocate blocks up front.
- */
- args.agbno = be32_to_cpu(agi->agi_root);
- args.fsbno = XFS_AGB_TO_FSB(args.mp, be32_to_cpu(agi->agi_seqno),
- args.agbno);
- /*
- * Allocate a fixed-size extent of inodes.
- */
- args.type = XFS_ALLOCTYPE_NEAR_BNO;
- args.mod = args.total = args.wasdel = args.isfl = args.userdata =
- args.minalignslop = 0;
- args.prod = 1;
- /*
- * Allow space for the inode btree to split.
- */
- args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
- if ((error = xfs_alloc_vextent(&args)))
- return error;
+ newino = be32_to_cpu(agi->agi_newino);
+ if(likely(newino != NULLAGINO)) {
+ args.agbno = XFS_AGINO_TO_AGBNO(args.mp, newino) +
+ XFS_IALLOC_BLOCKS(args.mp);
+ args.fsbno = XFS_AGB_TO_FSB(args.mp,
+ be32_to_cpu(agi->agi_seqno), args.agbno);
+ args.type = XFS_ALLOCTYPE_THIS_BNO;
+ args.mod = args.total = args.wasdel = args.isfl =
+ args.userdata = args.minalignslop = 0;
+ args.prod = 1;
+ args.alignment = 1;
+ /*
+ * Allow space for the inode btree to split.
+ */
+ args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
+ if ((error = xfs_alloc_vextent(&args)))
+ return error;
+ } else
+ args.fsbno = NULLFSBLOCK;
+ if (unlikely(args.fsbno == NULLFSBLOCK)) {
+ /*
+ * Set the alignment for the allocation.
+ * If stripe alignment is turned on then align at stripe unit
+ * boundary.
+ * If the cluster size is smaller than a filesystem block
+ * then we're doing I/O for inodes in filesystem block size
+ * pieces, so don't need alignment anyway.
+ */
+ isaligned = 0;
+ if (args.mp->m_sinoalign) {
+ ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
+ args.alignment = args.mp->m_dalign;
+ isaligned = 1;
+ } else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
+ args.mp->m_sb.sb_inoalignmt >=
+ XFS_B_TO_FSBT(args.mp,
+ XFS_INODE_CLUSTER_SIZE(args.mp)))
+ args.alignment = args.mp->m_sb.sb_inoalignmt;
+ else
+ args.alignment = 1;
+ /*
+ * Need to figure out where to allocate the inode blocks.
+ * Ideally they should be spaced out through the a.g.
+ * For now, just allocate blocks up front.
+ */
+ args.agbno = be32_to_cpu(agi->agi_root);
+ args.fsbno = XFS_AGB_TO_FSB(args.mp,
+ be32_to_cpu(agi->agi_seqno), args.agbno);
+ /*
+ * Allocate a fixed-size extent of inodes.
+ */
+ args.type = XFS_ALLOCTYPE_NEAR_BNO;
+ args.mod = args.total = args.wasdel = args.isfl =
+ args.userdata = args.minalignslop = 0;
+ args.prod = 1;
+ /*
+ * Allow space for the inode btree to split.
+ */
+ args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
+ if ((error = xfs_alloc_vextent(&args)))
+ return error;
+ }
+
/*
* If stripe alignment is turned on, then try again with cluster
* alignment.
@@ -1023,7 +1051,7 @@
rec.ir_freecount++;
/*
- * When an inode cluster is free, it becomes elgible for removal
+ * When an inode cluster is free, it becomes eligible for removal
*/
if ((mp->m_flags & XFS_MOUNT_IDELETE) &&
(rec.ir_freecount == XFS_IALLOC_INODES(mp))) {
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 3ce35a6..bb33113 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -509,7 +509,7 @@
} else {
/*
* If the inode is not fully constructed due to
- * filehandle mistmatches wait for the inode to go
+ * filehandle mismatches wait for the inode to go
* away and try again.
*
* iget_locked will call __wait_on_freeing_inode
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 88a517f..48146bd 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -160,7 +160,7 @@
xfs_dinode_t *dip;
/*
- * Call the space managment code to find the location of the
+ * Call the space management code to find the location of the
* inode on disk.
*/
imap.im_blkno = 0;
@@ -837,7 +837,7 @@
/*
* Given a mount structure and an inode number, return a pointer
- * to a newly allocated in-core inode coresponding to the given
+ * to a newly allocated in-core inode corresponding to the given
* inode number.
*
* Initialize the inode's attributes and extent pointers if it
@@ -2723,7 +2723,7 @@
/*
* Decrement the pin count of the given inode, and wake up
* anyone in xfs_iwait_unpin() if the count goes to 0. The
- * inode must have been previoulsy pinned with a call to xfs_ipin().
+ * inode must have been previously pinned with a call to xfs_ipin().
*/
void
xfs_iunpin(
@@ -3690,7 +3690,7 @@
xfs_iext_add(
xfs_ifork_t *ifp, /* inode fork pointer */
xfs_extnum_t idx, /* index to begin adding exts */
- int ext_diff) /* nubmer of extents to add */
+ int ext_diff) /* number of extents to add */
{
int byte_diff; /* new bytes being added */
int new_size; /* size of extents after adding */
@@ -4038,7 +4038,7 @@
xfs_extnum_t ext_diff; /* extents to remove in current list */
xfs_extnum_t nex1; /* number of extents before idx */
xfs_extnum_t nex2; /* extents after idx + count */
- int nlists; /* entries in indirecton array */
+ int nlists; /* entries in indirection array */
int page_idx = idx; /* index in target extent list */
ASSERT(ifp->if_flags & XFS_IFEXTIREC);
@@ -4291,9 +4291,9 @@
xfs_filblks_t blockcount = 0; /* number of blocks in extent */
xfs_bmbt_rec_t *ep = NULL; /* pointer to target extent */
xfs_ext_irec_t *erp = NULL; /* indirection array pointer */
- int high; /* upper boundry in search */
+ int high; /* upper boundary in search */
xfs_extnum_t idx = 0; /* index of target extent */
- int low; /* lower boundry in search */
+ int low; /* lower boundary in search */
xfs_extnum_t nextents; /* number of file extents */
xfs_fileoff_t startoff = 0; /* start offset of extent */
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 36aa1fc..7497a48 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -580,7 +580,7 @@
* been or is in the process of being flushed, then (ideally) we'd like to
* see if the inode's buffer is still incore, and if so give it a nudge.
* We delay doing so until the pushbuf routine, though, to avoid holding
- * the AIL lock across a call to the blackhole which is the buffercache.
+ * the AIL lock across a call to the blackhole which is the buffer cache.
* Also we don't want to sleep in any device strategy routines, which can happen
* if we do the subsequent bawrite in here.
*/
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index 32247b6..94068d0 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -272,7 +272,7 @@
size_t statstruct_size, /* sizeof struct filling */
char __user *ubuffer, /* buffer with inode stats */
int flags, /* defined in xfs_itable.h */
- int *done) /* 1 if there're more stats to get */
+ int *done) /* 1 if there are more stats to get */
{
xfs_agblock_t agbno=0;/* allocation group block number */
xfs_buf_t *agbp; /* agi header buffer */
@@ -676,7 +676,7 @@
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t *lastinop, /* inode to return */
char __user *buffer, /* buffer with inode stats */
- int *done) /* 1 if there're more stats to get */
+ int *done) /* 1 if there are more stats to get */
{
int count; /* count value for bulkstat call */
int error; /* return value */
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index 047d834..11eb4e1 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -60,7 +60,7 @@
size_t statstruct_size,/* sizeof struct that we're filling */
char __user *ubuffer,/* buffer with inode stats */
int flags, /* flag to control access method */
- int *done); /* 1 if there're more stats to get */
+ int *done); /* 1 if there are more stats to get */
int
xfs_bulkstat_single(
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 9176995..32e841d 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -59,7 +59,7 @@
int num_bblks);
STATIC int xlog_space_left(xlog_t *log, int cycle, int bytes);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_unalloc_log(xlog_t *log);
+STATIC void xlog_dealloc_log(xlog_t *log);
STATIC int xlog_write(xfs_mount_t *mp, xfs_log_iovec_t region[],
int nentries, xfs_log_ticket_t tic,
xfs_lsn_t *start_lsn,
@@ -304,7 +304,7 @@
if ((ticket->t_flags & XLOG_TIC_PERM_RESERV) == 0 ||
(flags & XFS_LOG_REL_PERM_RESERV)) {
/*
- * Release ticket if not permanent reservation or a specifc
+ * Release ticket if not permanent reservation or a specific
* request has been made to release a permanent reservation.
*/
xlog_trace_loggrant(log, ticket, "xfs_log_done: (non-permanent)");
@@ -511,7 +511,7 @@
vfsp->vfs_flag |= VFS_RDONLY;
if (error) {
cmn_err(CE_WARN, "XFS: log mount/recovery failed: error %d", error);
- xlog_unalloc_log(mp->m_log);
+ xlog_dealloc_log(mp->m_log);
return error;
}
}
@@ -667,7 +667,7 @@
*
* Go through the motions of sync'ing and releasing
* the iclog, even though no I/O will actually happen,
- * we need to wait for other log I/O's that may already
+ * we need to wait for other log I/Os that may already
* be in progress. Do this as a separate section of
* code so we'll know if we ever get stuck here that
* we're in this odd situation of trying to unmount
@@ -704,7 +704,7 @@
void
xfs_log_unmount_dealloc(xfs_mount_t *mp)
{
- xlog_unalloc_log(mp->m_log);
+ xlog_dealloc_log(mp->m_log);
}
/*
@@ -1492,7 +1492,7 @@
ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
- /* account for internal log which does't start at block #0 */
+ /* account for internal log which doesn't start at block #0 */
XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
XFS_BUF_WRITE(bp);
if ((error = XFS_bwrite(bp))) {
@@ -1506,10 +1506,10 @@
/*
- * Unallocate a log structure
+ * Deallocate a log structure
*/
void
-xlog_unalloc_log(xlog_t *log)
+xlog_dealloc_log(xlog_t *log)
{
xlog_in_core_t *iclog, *next_iclog;
xlog_ticket_t *tic, *next_tic;
@@ -1539,7 +1539,7 @@
if ((log->l_ticket_cnt != log->l_ticket_tcnt) &&
!XLOG_FORCED_SHUTDOWN(log)) {
xfs_fs_cmn_err(CE_WARN, log->l_mp,
- "xlog_unalloc_log: (cnt: %d, total: %d)",
+ "xlog_dealloc_log: (cnt: %d, total: %d)",
log->l_ticket_cnt, log->l_ticket_tcnt);
/* ASSERT(log->l_ticket_cnt == log->l_ticket_tcnt); */
@@ -1562,7 +1562,7 @@
#endif
log->l_mp->m_log = NULL;
kmem_free(log, sizeof(xlog_t));
-} /* xlog_unalloc_log */
+} /* xlog_dealloc_log */
/*
* Update counters atomically now that memcpy is done.
@@ -2829,7 +2829,7 @@
/*
* We let the log lock go, so it's possible that we hit a log I/O
- * error or someother SHUTDOWN condition that marks the iclog
+ * error or some other SHUTDOWN condition that marks the iclog
* as XLOG_STATE_IOERROR before the bwrite. However, we know that
* this iclog has consistent data, so we ignore IOERROR
* flags after this point.
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 4b2ac88..eacb3d4 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -27,7 +27,7 @@
#ifdef __KERNEL__
/*
- * By comparing each compnent, we don't have to worry about extra
+ * By comparing each component, we don't have to worry about extra
* endian issues in treating two 32 bit numbers as one 64 bit number
*/
static inline xfs_lsn_t _lsn_cmp(xfs_lsn_t lsn1, xfs_lsn_t lsn2)
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index add13f5..1f0016b 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -583,7 +583,7 @@
* x | x ... | x - 1 | x
* Another case that fits this picture would be
* x | x + 1 | x ... | x
- * In this case the head really is somwhere at the end of the
+ * In this case the head really is somewhere at the end of the
* log, as one of the latest writes at the beginning was
* incomplete.
* One more case is
@@ -2799,7 +2799,7 @@
* we don't need to worry about the block number being
* truncated in > 1 TB buffers because in user-land,
* we're now n32 or 64-bit so xfs_daddr_t is 64-bits so
- * the blkno's will get through the user-mode buffer
+ * the blknos will get through the user-mode buffer
* cache properly. The only bad case is o32 kernels
* where xfs_daddr_t is 32-bits but mount will warn us
* off a > 1 TB filesystem before we get here.
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 20e8abc..72e7e78 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -393,7 +393,7 @@
break;
}
- /* This ag is prefered for inodes */
+ /* This ag is preferred for inodes */
pag = &mp->m_perag[index];
pag->pagi_inodeok = 1;
if (index < max_metadata)
@@ -1728,7 +1728,7 @@
* We cannot use the hotcpu_register() function because it does
* not allow notifier instances. We need a notifier per filesystem
* as we need to be able to identify the filesystem to balance
- * the counters out. This is acheived by having a notifier block
+ * the counters out. This is achieved by having a notifier block
* embedded in the xfs_mount_t and doing pointer magic to get the
* mount pointer from the notifier block address.
*/
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index ebd7396..66cbee7 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -379,7 +379,7 @@
#endif
int m_dalign; /* stripe unit */
int m_swidth; /* stripe width */
- int m_sinoalign; /* stripe unit inode alignmnt */
+ int m_sinoalign; /* stripe unit inode alignment */
int m_attr_magicpct;/* 37% of the blocksize */
int m_dir_magicpct; /* 37% of the dir blocksize */
__uint8_t m_mk_sharedro; /* mark shared ro on unmount */
diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h
index 82a08ba..4f6a034 100644
--- a/fs/xfs/xfs_quota.h
+++ b/fs/xfs/xfs_quota.h
@@ -31,7 +31,7 @@
typedef __uint32_t xfs_dqid_t;
/*
- * Eventhough users may not have quota limits occupying all 64-bits,
+ * Even though users may not have quota limits occupying all 64-bits,
* they may need 64-bit accounting. Hence, 64-bit quota-counters,
* and quota-limits. This is a waste in the common case, but hey ...
*/
@@ -246,7 +246,7 @@
#ifdef __KERNEL__
/*
* This check is done typically without holding the inode lock;
- * that may seem racey, but it is harmless in the context that it is used.
+ * that may seem racy, but it is harmless in the context that it is used.
* The inode cannot go inactive as long a reference is kept, and
* therefore if dquot(s) were attached, they'll stay consistent.
* If, for example, the ownership of the inode changes while
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 2918956..8d056ce 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -490,7 +490,7 @@
case XFS_TRANS_SB_RES_FREXTENTS:
/*
* The allocation has already been applied to the
- * in-core superblocks's counter. This should only
+ * in-core superblock's counter. This should only
* be applied to the on-disk superblock.
*/
ASSERT(delta < 0);
@@ -611,7 +611,7 @@
if (whole)
/*
- * Log the whole thing, the fields are discontiguous.
+ * Log the whole thing, the fields are noncontiguous.
*/
xfs_trans_log_buf(tp, bp, 0, sizeof(xfs_sb_t) - 1);
else
@@ -669,7 +669,7 @@
/*
* Apply any superblock modifications to the in-core version.
* The t_res_fdblocks_delta and t_res_frextents_delta fields are
- * explicity NOT applied to the in-core superblock.
+ * explicitly NOT applied to the in-core superblock.
* The idea is that that has already been done.
*/
if (tp->t_flags & XFS_TRANS_SB_DIRTY) {
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index e48befa..100d9a4 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -354,7 +354,7 @@
xfs_lsn_t t_commit_lsn; /* log seq num of end of
* transaction. */
struct xfs_mount *t_mountp; /* ptr to fs mount struct */
- struct xfs_dquot_acct *t_dqinfo; /* accting info for dquots */
+ struct xfs_dquot_acct *t_dqinfo; /* acctg info for dquots */
xfs_trans_callback_t t_callback; /* transaction callback */
void *t_callarg; /* callback arg */
unsigned int t_flags; /* misc flags */
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index e341409..7c5894d 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -272,7 +272,7 @@
* This is to coordinate with the xfs_iflush() and xfs_iflush_done()
* routines in the eventual clearing of the ilf_fields bits.
* See the big comment in xfs_iflush() for an explanation of
- * this coorination mechanism.
+ * this coordination mechanism.
*/
flags |= ip->i_itemp->ili_last_fields;
ip->i_itemp->ili_format.ilf_fields |= flags;
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index d4ec4df..504d2a8 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -880,10 +880,10 @@
* determine if they should be flushed sync, async, or
* delwri.
* SYNC_CLOSE - This flag is passed when the system is being
- * unmounted. We should sync and invalidate everthing.
+ * unmounted. We should sync and invalidate everything.
* SYNC_FSDATA - This indicates that the caller would like to make
* sure the superblock is safe on disk. We can ensure
- * this by simply makeing sure the log gets flushed
+ * this by simply making sure the log gets flushed
* if SYNC_BDFLUSH is set, and by actually writing it
* out otherwise.
*
@@ -908,7 +908,7 @@
*
* This routine supports all of the flags defined for the generic VFS_SYNC
* interface as explained above under xfs_sync. In the interests of not
- * changing interfaces within the 6.5 family, additional internallly-
+ * changing interfaces within the 6.5 family, additional internally-
* required functions are specified within a separate xflags parameter,
* only available by calling this routine.
*
@@ -1090,7 +1090,7 @@
* If this is just vfs_sync() or pflushd() calling
* then we can skip inodes for which it looks like
* there is nothing to do. Since we don't have the
- * inode locked this is racey, but these are periodic
+ * inode locked this is racy, but these are periodic
* calls so it doesn't matter. For the others we want
* to know for sure, so we at least try to lock them.
*/
@@ -1429,7 +1429,7 @@
*
* This routine supports all of the flags defined for the generic VFS_SYNC
* interface as explained above under xfs_sync. In the interests of not
- * changing interfaces within the 6.5 family, additional internallly-
+ * changing interfaces within the 6.5 family, additional internally-
* required functions are specified within a separate xflags parameter,
* only available by calling this routine.
*
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 0f0a64e..de49601 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -848,7 +848,7 @@
* If this is a synchronous mount, make sure that the
* transaction goes to disk before returning to the user.
* This is slightly sub-optimal in that truncates require
- * two sync transactions instead of one for wsync filesytems.
+ * two sync transactions instead of one for wsync filesystems.
* One for the truncate and one for the timestamps since we
* don't want to change the timestamps unless we're sure the
* truncate worked. Truncates are less than 1% of the laddis
@@ -1170,7 +1170,7 @@
/*
* If this inode is on the RT dev we need to flush that
- * cache aswell.
+ * cache as well.
*/
if (ip->i_d.di_flags & XFS_DIFLAG_REALTIME)
xfs_blkdev_issue_flush(ip->i_mount->m_rtdev_targp);
@@ -1380,7 +1380,7 @@
*/
ntp = xfs_trans_dup(tp);
/*
- * Commit the transaction containing extent freeing and EFD's.
+ * Commit the transaction containing extent freeing and EFDs.
* If we get an error on the commit here or on the reserve below,
* we need to unlock the inode since the new transaction doesn't
* have the inode attached.
@@ -2023,7 +2023,7 @@
XFS_QM_DQRELE(mp, gdqp);
/*
- * Propogate the fact that the vnode changed after the
+ * Propagate the fact that the vnode changed after the
* xfs_inode locks have been released.
*/
VOP_VNODE_CHANGE(vp, VCHANGE_FLAGS_TRUNCATED, 3);
@@ -2370,7 +2370,7 @@
* for a log reservation. Since we'll have to wait for the
* inactive code to complete before returning from xfs_iget,
* we need to make sure that we don't have log space reserved
- * when we call xfs_iget. Instead we get an unlocked referece
+ * when we call xfs_iget. Instead we get an unlocked reference
* to the inode before getting our log reservation.
*/
error = xfs_get_dir_entry(dentry, &ip);
@@ -3020,7 +3020,7 @@
* for a log reservation. Since we'll have to wait for the
* inactive code to complete before returning from xfs_iget,
* we need to make sure that we don't have log space reserved
- * when we call xfs_iget. Instead we get an unlocked referece
+ * when we call xfs_iget. Instead we get an unlocked reference
* to the inode before getting our log reservation.
*/
error = xfs_get_dir_entry(dentry, &cdp);
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h
index 62623fa..013575e 100644
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ b/include/asm-arm/arch-ixp23xx/uncompress.h
@@ -16,26 +16,21 @@
#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS)
-static __inline__ void putc(char c)
+static inline void putc(char c)
{
int j;
for (j = 0; j < 0x1000; j++) {
if (UART_BASE[UART_LSR] & UART_LSR_THRE)
break;
+ barrier();
}
UART_BASE[UART_TX] = c;
}
-static void putstr(const char *s)
+static inline void flush(void)
{
- while (*s) {
- putc(*s);
- if (*s == '\n')
- putc('\r');
- s++;
- }
}
#define arch_decomp_setup()
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 1409c5b..c8f53a7 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -485,7 +485,7 @@
#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 1) /* Specify Alternate Mode */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
#define SASR0_I2SOFF (1 << 7) /* Controller Status */
#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 0b43495..94cb498 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -27,6 +27,8 @@
*/
struct corgibl_machinfo {
int max_intensity;
+ int default_intensity;
+ int limit_mask;
void (*set_bl_intensity)(int intensity);
};
extern void corgibl_limit_intensity(int limit);
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 8f331bb..65ac305 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -308,8 +308,6 @@
#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
#define __NR_waitid (__NR_SYSCALL_BASE+280)
-
-#if defined(__ARM_EABI__) /* reserve these for un-muxing socketcall */
#define __NR_socket (__NR_SYSCALL_BASE+281)
#define __NR_bind (__NR_SYSCALL_BASE+282)
#define __NR_connect (__NR_SYSCALL_BASE+283)
@@ -327,9 +325,6 @@
#define __NR_getsockopt (__NR_SYSCALL_BASE+295)
#define __NR_sendmsg (__NR_SYSCALL_BASE+296)
#define __NR_recvmsg (__NR_SYSCALL_BASE+297)
-#endif
-
-#if defined(__ARM_EABI__) /* reserve these for un-muxing ipc */
#define __NR_semop (__NR_SYSCALL_BASE+298)
#define __NR_semget (__NR_SYSCALL_BASE+299)
#define __NR_semctl (__NR_SYSCALL_BASE+300)
@@ -341,16 +336,10 @@
#define __NR_shmdt (__NR_SYSCALL_BASE+306)
#define __NR_shmget (__NR_SYSCALL_BASE+307)
#define __NR_shmctl (__NR_SYSCALL_BASE+308)
-#endif
-
#define __NR_add_key (__NR_SYSCALL_BASE+309)
#define __NR_request_key (__NR_SYSCALL_BASE+310)
#define __NR_keyctl (__NR_SYSCALL_BASE+311)
-
-#if defined(__ARM_EABI__) /* reserved for un-muxing ipc */
#define __NR_semtimedop (__NR_SYSCALL_BASE+312)
-#endif
-
#define __NR_vserver (__NR_SYSCALL_BASE+313)
#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
index de46148..9291c24 100644
--- a/include/asm-generic/local.h
+++ b/include/asm-generic/local.h
@@ -7,8 +7,15 @@
#include <asm/atomic.h>
#include <asm/types.h>
-/* An unsigned long type for operations which are atomic for a single
- * CPU. Usually used in combination with per-cpu variables. */
+/*
+ * A signed long type for operations which are atomic for a single CPU.
+ * Usually used in combination with per-cpu variables.
+ *
+ * This is the default implementation, which uses atomic_long_t. Which is
+ * rather pointless. The whole point behind local_t is that some processors
+ * can perform atomic adds and subtracts in a manner which is atomic wrt IRQs
+ * running on this CPU. local_t allows exploitation of such capabilities.
+ */
/* Implement in terms of atomics. */
@@ -20,7 +27,7 @@
#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) }
-#define local_read(l) ((unsigned long)atomic_long_read(&(l)->a))
+#define local_read(l) atomic_long_read(&(l)->a)
#define local_set(l,i) atomic_long_set((&(l)->a),(i))
#define local_inc(l) atomic_long_inc(&(l)->a)
#define local_dec(l) atomic_long_dec(&(l)->a)
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
index 40c6d1f..29c6ac3 100644
--- a/include/asm-generic/mutex-dec.h
+++ b/include/asm-generic/mutex-dec.h
@@ -17,13 +17,14 @@
* it wasn't 1 originally. This function MUST leave the value lower than
* 1 even when the "1" assertion wasn't true.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- if (unlikely(atomic_dec_return(count) < 0)) \
- fail_fn(count); \
- else \
- smp_mb(); \
-} while (0)
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(atomic_dec_return(count) < 0))
+ fail_fn(count);
+ else
+ smp_mb();
+}
/**
* __mutex_fastpath_lock_retval - try to take the lock by moving the count
@@ -36,7 +37,7 @@
* or anything the slow path function returns.
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
return fail_fn(count);
@@ -59,12 +60,13 @@
* __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
* to return 0 otherwise.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- smp_mb(); \
- if (unlikely(atomic_inc_return(count) <= 0)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ smp_mb();
+ if (unlikely(atomic_inc_return(count) <= 0))
+ fail_fn(count);
+}
#define __mutex_slowpath_needs_to_unlock() 1
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 1d24f47..32a2100 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -3,7 +3,7 @@
*
* Generic implementation of the mutex fastpath, based on xchg().
*
- * NOTE: An xchg based implementation is less optimal than an atomic
+ * NOTE: An xchg based implementation might be less optimal than an atomic
* decrement/increment based implementation. If your architecture
* has a reasonable atomic dec/inc then you should probably use
* asm-generic/mutex-dec.h instead, or you could open-code an
@@ -22,14 +22,14 @@
* wasn't 1 originally. This function MUST leave the value lower than 1
* even when the "1" assertion wasn't true.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- if (unlikely(atomic_xchg(count, 0) != 1)) \
- fail_fn(count); \
- else \
- smp_mb(); \
-} while (0)
-
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(atomic_xchg(count, 0) != 1))
+ fail_fn(count);
+ else
+ smp_mb();
+}
/**
* __mutex_fastpath_lock_retval - try to take the lock by moving the count
@@ -42,7 +42,7 @@
* or anything the slow path function returns
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_xchg(count, 0) != 1))
return fail_fn(count);
@@ -64,12 +64,13 @@
* __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
* to return 0 otherwise.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- smp_mb(); \
- if (unlikely(atomic_xchg(count, 1) != 0)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ smp_mb();
+ if (unlikely(atomic_xchg(count, 1) != 0))
+ fail_fn(count);
+}
#define __mutex_slowpath_needs_to_unlock() 0
diff --git a/include/asm-i386/apicdef.h b/include/asm-i386/apicdef.h
index 03185ce..5e4a35a 100644
--- a/include/asm-i386/apicdef.h
+++ b/include/asm-i386/apicdef.h
@@ -37,6 +37,7 @@
#define APIC_SPIV_FOCUS_DISABLED (1<<9)
#define APIC_SPIV_APIC_ENABLED (1<<8)
#define APIC_ISR 0x100
+#define APIC_ISR_NR 0x8 /* Number of 32 bit ISR registers. */
#define APIC_TMR 0x180
#define APIC_IRR 0x200
#define APIC_ESR 0x280
diff --git a/include/asm-i386/floppy.h b/include/asm-i386/floppy.h
index 79727af..0340304 100644
--- a/include/asm-i386/floppy.h
+++ b/include/asm-i386/floppy.h
@@ -56,7 +56,6 @@
register unsigned char st;
#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
#ifdef TRACE_FLPY_INT
static int calls=0;
@@ -71,38 +70,6 @@
bytes = virtual_dma_count;
#endif
-#ifndef NO_FLOPPY_ASSEMBLER
- __asm__ (
- "testl %1,%1"
- "je 3f"
-"1: inb %w4,%b0"
- "andb $160,%b0"
- "cmpb $160,%b0"
- "jne 2f"
- "incw %w4"
- "testl %3,%3"
- "jne 4f"
- "inb %w4,%b0"
- "movb %0,(%2)"
- "jmp 5f"
-"4: movb (%2),%0"
- "outb %b0,%w4"
-"5: decw %w4"
- "outb %0,$0x80"
- "decl %1"
- "incl %2"
- "testl %1,%1"
- "jne 1b"
-"3: inb %w4,%b0"
-"2: "
- : "=a" ((char) st),
- "=c" ((long) virtual_dma_count),
- "=S" ((long) virtual_dma_addr)
- : "b" ((long) virtual_dma_mode),
- "d" ((short) virtual_dma_port+4),
- "1" ((long) virtual_dma_count),
- "2" ((long) virtual_dma_addr));
-#else
{
register int lcount;
register char *lptr;
@@ -122,7 +89,6 @@
virtual_dma_addr = lptr;
st = inb(virtual_dma_port+4);
}
-#endif
#ifdef TRACE_FLPY_INT
calls++;
diff --git a/include/asm-i386/local.h b/include/asm-i386/local.h
index 0177da8..e67fa08 100644
--- a/include/asm-i386/local.h
+++ b/include/asm-i386/local.h
@@ -5,7 +5,7 @@
typedef struct
{
- volatile unsigned long counter;
+ volatile long counter;
} local_t;
#define LOCAL_INIT(i) { (i) }
@@ -29,7 +29,7 @@
:"m" (v->counter));
}
-static __inline__ void local_add(unsigned long i, local_t *v)
+static __inline__ void local_add(long i, local_t *v)
{
__asm__ __volatile__(
"addl %1,%0"
@@ -37,7 +37,7 @@
:"ir" (i), "m" (v->counter));
}
-static __inline__ void local_sub(unsigned long i, local_t *v)
+static __inline__ void local_sub(long i, local_t *v)
{
__asm__ __volatile__(
"subl %1,%0"
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 014e356..2e7f3e2 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -318,8 +318,10 @@
#define __NR_unshare 310
#define __NR_set_robust_list 311
#define __NR_get_robust_list 312
+#define __NR_sys_splice 313
+#define __NR_sys_sync_file_range 314
-#define NR_syscalls 313
+#define NR_syscalls 315
/*
* user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h
index d4cec32..edf2ceb 100644
--- a/include/asm-ia64/asmmacro.h
+++ b/include/asm-ia64/asmmacro.h
@@ -38,6 +38,10 @@
/*
* Helper macros for accessing user memory.
+ *
+ * When adding any new .section/.previous entries here, make sure to
+ * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or
+ * unpleasant things will happen.
*/
.section "__ex_table", "a" // declare section & section attributes
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
index 4e7e6f2..37e52a2 100644
--- a/include/asm-ia64/pal.h
+++ b/include/asm-ia64/pal.h
@@ -68,6 +68,7 @@
#define PAL_SHUTDOWN 40 /* enter processor shutdown state */
#define PAL_PREFETCH_VISIBILITY 41 /* Make Processor Prefetches Visible */
#define PAL_LOGICAL_TO_PHYSICAL 42 /* returns information on logical to physical processor mapping */
+#define PAL_CACHE_SHARED_INFO 43 /* returns information on caches shared by logical processor */
#define PAL_COPY_PAL 256 /* relocate PAL procedures and PAL PMI */
#define PAL_HALT_INFO 257 /* return the low power capabilities of processor */
@@ -130,7 +131,7 @@
#define PAL_CACHE_LINE_STATE_MODIFIED 3 /* Modified */
typedef struct pal_freq_ratio {
- u64 den : 32, num : 32; /* numerator & denominator */
+ u32 den, num; /* numerator & denominator */
} itc_ratio, proc_ratio;
typedef union pal_cache_config_info_1_s {
@@ -151,10 +152,10 @@
typedef union pal_cache_config_info_2_s {
struct {
- u64 cache_size : 32, /*cache size in bytes*/
+ u32 cache_size; /*cache size in bytes*/
- alias_boundary : 8, /* 39-32 aliased addr
+ u32 alias_boundary : 8, /* 39-32 aliased addr
* separation for max
* performance.
*/
@@ -1647,6 +1648,33 @@
return iprv.status;
}
+
+typedef struct pal_cache_shared_info_s
+{
+ u64 num_shared;
+ pal_proc_n_log_info1_t ppli1;
+ pal_proc_n_log_info2_t ppli2;
+} pal_cache_shared_info_t;
+
+/* Get information on logical to physical processor mappings. */
+static inline s64
+ia64_pal_cache_shared_info(u64 level,
+ u64 type,
+ u64 proc_number,
+ pal_cache_shared_info_t *info)
+{
+ struct ia64_pal_retval iprv;
+
+ PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number);
+
+ if (iprv.status == PAL_STATUS_SUCCESS) {
+ info->num_shared = iprv.v0;
+ info->ppli1.ppli1_data = iprv.v1;
+ info->ppli2.ppli2_data = iprv.v2;
+ }
+
+ return iprv.status;
+}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_IA64_PAL_H */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index 019956c..36070c1 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -285,12 +285,13 @@
#define __NR_faccessat 1293
/* 1294, 1295 reserved for pselect/ppoll */
#define __NR_unshare 1296
+#define __NR_splice 1297
#ifdef __KERNEL__
#include <linux/config.h>
-#define NR_syscalls 273 /* length of syscall table */
+#define NR_syscalls 274 /* length of syscall table */
#define __ARCH_WANT_SYS_RT_SIGACTION
diff --git a/include/asm-parisc/atomic.h b/include/asm-parisc/atomic.h
index 4dc7253..403ea97 100644
--- a/include/asm-parisc/atomic.h
+++ b/include/asm-parisc/atomic.h
@@ -210,6 +210,8 @@
#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
+
#define ATOMIC_INIT(i) ((atomic_t) { (i) })
#define smp_mb__before_atomic_dec() smp_mb()
@@ -267,6 +269,7 @@
#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0)
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i),(v)) == 0)
#endif /* __LP64__ */
diff --git a/include/asm-parisc/cache.h b/include/asm-parisc/cache.h
index ae50f8e..c831665 100644
--- a/include/asm-parisc/cache.h
+++ b/include/asm-parisc/cache.h
@@ -48,7 +48,7 @@
extern void flush_kernel_icache_range_asm(unsigned long, unsigned long);
extern void flush_user_dcache_range_asm(unsigned long, unsigned long);
extern void flush_kernel_dcache_range_asm(unsigned long, unsigned long);
-extern void flush_kernel_dcache_page(void *);
+extern void flush_kernel_dcache_page_asm(void *);
extern void flush_kernel_icache_page(void *);
extern void disable_sr_hashing(void); /* turns off space register hashing */
extern void disable_sr_hashing_asm(int); /* low level support for above */
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index c53af9f..76b6b7d 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -62,7 +62,7 @@
#define flush_dcache_mmap_unlock(mapping) \
write_unlock_irq(&(mapping)->tree_lock)
-#define flush_icache_page(vma,page) do { flush_kernel_dcache_page(page_address(page)); flush_kernel_icache_page(page_address(page)); } while (0)
+#define flush_icache_page(vma,page) do { flush_kernel_dcache_page(page); flush_kernel_icache_page(page_address(page)); } while (0)
#define flush_icache_range(s,e) do { flush_kernel_dcache_range_asm(s,e); flush_kernel_icache_range_asm(s,e); } while (0)
@@ -184,6 +184,21 @@
}
+static inline void
+flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+ if (PageAnon(page))
+ flush_user_dcache_page(vmaddr);
+}
+#define ARCH_HAS_FLUSH_ANON_PAGE
+
+static inline void
+flush_kernel_dcache_page(struct page *page)
+{
+ flush_kernel_dcache_page_asm(page_address(page));
+}
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+
#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void);
#endif
diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h
index be0c723..29da311 100644
--- a/include/asm-parisc/io.h
+++ b/include/asm-parisc/io.h
@@ -25,35 +25,11 @@
* eg dev->hpa or 0xfee00000.
*/
-#ifdef CONFIG_DEBUG_IOREMAP
-#ifdef CONFIG_64BIT
-#define NYBBLE_SHIFT 60
-#else
-#define NYBBLE_SHIFT 28
-#endif
-extern void gsc_bad_addr(unsigned long addr);
-extern void __raw_bad_addr(const volatile void __iomem *addr);
-#define gsc_check_addr(addr) \
- if ((addr >> NYBBLE_SHIFT) != 0xf) { \
- gsc_bad_addr(addr); \
- addr |= 0xfUL << NYBBLE_SHIFT; \
- }
-#define __raw_check_addr(addr) \
- if (((unsigned long)addr >> NYBBLE_SHIFT) != 0xe) \
- __raw_bad_addr(addr); \
- addr = (void __iomem *)((unsigned long)addr | (0xfUL << NYBBLE_SHIFT));
-#else
-#define gsc_check_addr(addr)
-#define __raw_check_addr(addr)
-#endif
-
static inline unsigned char gsc_readb(unsigned long addr)
{
long flags;
unsigned char ret;
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" rsm 2,%0\n"
" ldbx 0(%2),%1\n"
@@ -68,8 +44,6 @@
long flags;
unsigned short ret;
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" rsm 2,%0\n"
" ldhx 0(%2),%1\n"
@@ -83,8 +57,6 @@
{
u32 ret;
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" ldwax 0(%1),%0\n"
: "=r" (ret) : "r" (addr) );
@@ -95,7 +67,6 @@
static inline unsigned long long gsc_readq(unsigned long addr)
{
unsigned long long ret;
- gsc_check_addr(addr);
#ifdef __LP64__
__asm__ __volatile__(
@@ -112,8 +83,6 @@
static inline void gsc_writeb(unsigned char val, unsigned long addr)
{
long flags;
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" rsm 2,%0\n"
" stbs %1,0(%2)\n"
@@ -124,8 +93,6 @@
static inline void gsc_writew(unsigned short val, unsigned long addr)
{
long flags;
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" rsm 2,%0\n"
" sths %1,0(%2)\n"
@@ -135,8 +102,6 @@
static inline void gsc_writel(unsigned int val, unsigned long addr)
{
- gsc_check_addr(addr);
-
__asm__ __volatile__(
" stwas %0,0(%1)\n"
: : "r" (val), "r" (addr) );
@@ -144,8 +109,6 @@
static inline void gsc_writeq(unsigned long long val, unsigned long addr)
{
- gsc_check_addr(addr);
-
#ifdef __LP64__
__asm__ __volatile__(
" stda %0,0(%1)\n"
@@ -180,14 +143,7 @@
extern void iounmap(void __iomem *addr);
-/*
- * USE_HPPA_IOREMAP is the magic flag to enable or disable real ioremap()
- * functionality. It's currently disabled because it may not work on some
- * machines.
- */
-#define USE_HPPA_IOREMAP 0
-#if USE_HPPA_IOREMAP
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
{
return (*(volatile unsigned char __force *) (addr));
@@ -221,57 +177,6 @@
{
*(volatile unsigned long long __force *) addr = b;
}
-#else /* !USE_HPPA_IOREMAP */
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- return gsc_readb((unsigned long) addr);
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- return gsc_readw((unsigned long) addr);
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- return gsc_readl((unsigned long) addr);
-}
-static inline unsigned long long __raw_readq(const volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- return gsc_readq((unsigned long) addr);
-}
-
-static inline void __raw_writeb(unsigned char b, volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- gsc_writeb(b, (unsigned long) addr);
-}
-static inline void __raw_writew(unsigned short b, volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- gsc_writew(b, (unsigned long) addr);
-}
-static inline void __raw_writel(unsigned int b, volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- gsc_writel(b, (unsigned long) addr);
-}
-static inline void __raw_writeq(unsigned long long b, volatile void __iomem *addr)
-{
- __raw_check_addr(addr);
-
- gsc_writeq(b, (unsigned long) addr);
-}
-#endif /* !USE_HPPA_IOREMAP */
/* readb can never be const, so use __fswab instead of le*_to_cpu */
#define readb(addr) __raw_readb(addr)
diff --git a/include/asm-parisc/local.h b/include/asm-parisc/local.h
index 892b3b2..d0f5509 100644
--- a/include/asm-parisc/local.h
+++ b/include/asm-parisc/local.h
@@ -4,16 +4,16 @@
#include <linux/percpu.h>
#include <asm/atomic.h>
-typedef atomic_t local_t;
+typedef atomic_long_t local_t;
-#define LOCAL_INIT(i) ATOMIC_INIT(i)
-#define local_read(v) atomic_read(v)
-#define local_set(v,i) atomic_set(v,i)
+#define LOCAL_INIT(i) ATOMIC_LONG_INIT(i)
+#define local_read(v) atomic_long_read(v)
+#define local_set(v,i) atomic_long_set(v,i)
-#define local_inc(v) atomic_inc(v)
-#define local_dec(v) atomic_dec(v)
-#define local_add(i, v) atomic_add(i, v)
-#define local_sub(i, v) atomic_sub(i, v)
+#define local_inc(v) atomic_long_inc(v)
+#define local_dec(v) atomic_long_dec(v)
+#define local_add(i, v) atomic_long_add(i, v)
+#define local_sub(i, v) atomic_long_sub(i, v)
#define __local_inc(v) ((v)->counter++)
#define __local_dec(v) ((v)->counter--)
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index 9f303c0..45e02aa 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -26,7 +26,7 @@
copy_user_page(void *vto, void *vfrom, unsigned long vaddr, struct page *pg)
{
copy_user_page_asm(vto, vfrom);
- flush_kernel_dcache_page(vto);
+ flush_kernel_dcache_page_asm(vto);
/* XXX: ppc flushes icache too, should we? */
}
@@ -40,14 +40,19 @@
/*
* These are used to make use of C type-checking..
*/
-#ifdef __LP64__
-typedef struct { unsigned long pte; } pte_t;
-#else
-typedef struct {
- unsigned long pte;
- unsigned long flags;
-} pte_t;
+#define STRICT_MM_TYPECHECKS
+#ifdef STRICT_MM_TYPECHECKS
+typedef struct { unsigned long pte;
+#if !defined(CONFIG_64BIT)
+ unsigned long future_flags;
+ /* XXX: it's possible to remove future_flags and change BITS_PER_PTE_ENTRY
+ to 2, but then strangely the identical 32bit kernel boots on a
+ c3000(pa20), but not any longer on a 715(pa11).
+ Still investigating... HelgeD.
+ */
#endif
+} pte_t; /* either 32 or 64bit */
+
/* NOTE: even on 64 bits, these entries are __u32 because we allocate
* the pmd and pgd in ZONE_DMA (i.e. under 4GB) */
typedef struct { __u32 pmd; } pmd_t;
@@ -55,25 +60,44 @@
typedef struct { unsigned long pgprot; } pgprot_t;
#define pte_val(x) ((x).pte)
-#ifdef __LP64__
-#define pte_flags(x) (*(__u32 *)&((x).pte))
-#else
-#define pte_flags(x) ((x).flags)
-#endif
-
/* These do not work lvalues, so make sure we don't use them as such. */
#define pmd_val(x) ((x).pmd + 0)
#define pgd_val(x) ((x).pgd + 0)
#define pgprot_val(x) ((x).pgprot)
-#define __pmd_val_set(x,n) (x).pmd = (n)
-#define __pgd_val_set(x,n) (x).pgd = (n)
-
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
+#define __pmd_val_set(x,n) (x).pmd = (n)
+#define __pgd_val_set(x,n) (x).pgd = (n)
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef __u32 pmd_t;
+typedef __u32 pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgd(x) (x)
+#define __pgprot(x) (x)
+
+#define __pmd_val_set(x,n) (x) = (n)
+#define __pgd_val_set(x,n) (x) = (n)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+
typedef struct __physmem_range {
unsigned long start_pfn;
unsigned long pages; /* PAGE_SIZE pages */
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index fe7f6a2..77bbafb 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -289,4 +289,9 @@
{
}
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+ /* We don't need to penalize isa irq's */
+}
+
#endif /* __ASM_PARISC_PCI_H */
diff --git a/include/asm-parisc/pdc_chassis.h b/include/asm-parisc/pdc_chassis.h
index adac9ac..a609273 100644
--- a/include/asm-parisc/pdc_chassis.h
+++ b/include/asm-parisc/pdc_chassis.h
@@ -6,9 +6,8 @@
*
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h
index 16c2ac0..a93960e 100644
--- a/include/asm-parisc/spinlock.h
+++ b/include/asm-parisc/spinlock.h
@@ -134,14 +134,22 @@
return 1;
}
-static __inline__ int __raw_is_read_locked(raw_rwlock_t *rw)
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static __inline__ int __raw_read_can_lock(raw_rwlock_t *rw)
{
- return rw->counter > 0;
+ return rw->counter >= 0;
}
-static __inline__ int __raw_is_write_locked(raw_rwlock_t *rw)
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static __inline__ int __raw_write_can_lock(raw_rwlock_t *rw)
{
- return rw->counter < 0;
+ return !rw->counter;
}
#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-parisc/thread_info.h b/include/asm-parisc/thread_info.h
index ac32f14..f2f83b0 100644
--- a/include/asm-parisc/thread_info.h
+++ b/include/asm-parisc/thread_info.h
@@ -49,7 +49,8 @@
#endif /* !__ASSEMBLY */
-#define PREEMPT_ACTIVE 0x10000000
+#define PREEMPT_ACTIVE_BIT 28
+#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT)
/*
* thread information flags
diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h
index 99817a8..f44b529 100644
--- a/include/asm-powerpc/bug.h
+++ b/include/asm-powerpc/bug.h
@@ -30,34 +30,60 @@
#ifdef CONFIG_BUG
+/*
+ * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
+ * optimisations. However depending on the complexity of the condition
+ * some compiler versions may not produce optimal results.
+ */
+
#define BUG() do { \
__asm__ __volatile__( \
"1: twi 31,0,0\n" \
".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
+ "\t"PPC_LONG" 1b,%0,%1,%2\n" \
".previous" \
: : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
} while (0)
#define BUG_ON(x) do { \
- __asm__ __volatile__( \
+ if (__builtin_constant_p(x)) { \
+ if (x) \
+ BUG(); \
+ } else { \
+ __asm__ __volatile__( \
"1: "PPC_TLNEI" %0,0\n" \
".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
+ "\t"PPC_LONG" 1b,%1,%2,%3\n" \
".previous" \
: : "r" ((long)(x)), "i" (__LINE__), \
"i" (__FILE__), "i" (__FUNCTION__)); \
+ } \
+} while (0)
+
+#define __WARN() do { \
+ __asm__ __volatile__( \
+ "1: twi 31,0,0\n" \
+ ".section __bug_table,\"a\"\n" \
+ "\t"PPC_LONG" 1b,%0,%1,%2\n" \
+ ".previous" \
+ : : "i" (__LINE__ + BUG_WARNING_TRAP), \
+ "i" (__FILE__), "i" (__FUNCTION__)); \
} while (0)
#define WARN_ON(x) do { \
- __asm__ __volatile__( \
+ if (__builtin_constant_p(x)) { \
+ if (x) \
+ __WARN(); \
+ } else { \
+ __asm__ __volatile__( \
"1: "PPC_TLNEI" %0,0\n" \
".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
+ "\t"PPC_LONG" 1b,%1,%2,%3\n" \
".previous" \
: : "r" ((long)(x)), \
"i" (__LINE__ + BUG_WARNING_TRAP), \
"i" (__FILE__), "i" (__FUNCTION__)); \
+ } \
} while (0)
#define HAVE_ARCH_BUG
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index fe45f6f..4321483 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -188,153 +188,154 @@
!defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
!defined(CONFIG_BOOKE))
-enum {
- CPU_FTRS_PPC601 = CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE,
- CPU_FTRS_603 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_604 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE,
- CPU_FTRS_740_NOTAU = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_740 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_750 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_750FX1 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
- CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM,
- CPU_FTRS_750FX2 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
- CPU_FTR_NO_DPM,
- CPU_FTRS_750FX = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
- CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
- CPU_FTRS_750GX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
- CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU |
- CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP |
- CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS,
- CPU_FTRS_7400_NOTAU = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
- CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_7400 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR |
- CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE |
- CPU_FTR_MAYBE_CAN_NAP,
- CPU_FTRS_7450_20 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7450_21 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7450_23 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7455_1 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
- CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7455_20 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP |
- CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS,
- CPU_FTRS_7455 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7447_10 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC,
- CPU_FTRS_7447 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_7447A = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 |
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_NEED_COHERENT,
- CPU_FTRS_82XX = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB,
- CPU_FTRS_G2_LE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS,
- CPU_FTRS_E300 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE |
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS |
- CPU_FTR_COMMON,
- CPU_FTRS_CLASSIC32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
- CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
- CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN,
- CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP |
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN,
- CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_NODSISRALIGN,
- CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_NODSISRALIGN,
- CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN,
- CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_NODSISRALIGN,
- CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN,
- CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN,
+#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_603 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_604 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_740 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_750 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_750FX1 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX2 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750GX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+ CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_DUAL_PLL_750FX | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+ CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_7400 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+ CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+ CPU_FTR_MAYBE_CAN_NAP)
+#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+ CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_7455 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC)
+#define CPU_FTRS_7447 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_7447A (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_NEED_COHERENT)
+#define CPU_FTRS_82XX (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
+#define CPU_FTRS_G2_LE (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_E300 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_COMMON)
+#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_POWER3_32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_POWER4_32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_970_32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_8XX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB)
+#define CPU_FTRS_40X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_44X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
#ifdef __powerpc64__
- CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
- CPU_FTRS_RS64 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_IABR |
- CPU_FTR_MMCRA | CPU_FTR_CTRL,
- CPU_FTRS_POWER4 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA,
- CPU_FTRS_PPC970 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 |
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA,
- CPU_FTRS_POWER5 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 |
- CPU_FTR_MMCRA | CPU_FTR_SMT |
- CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE |
- CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR,
- CPU_FTRS_CELL = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 |
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT |
- CPU_FTR_CTRL | CPU_FTR_PAUSE_ZERO,
- CPU_FTRS_COMPATIBLE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2,
+#define CPU_FTRS_POWER3 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_IABR)
+#define CPU_FTRS_RS64 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
+ CPU_FTR_MMCRA | CPU_FTR_CTRL)
+#define CPU_FTRS_POWER4 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA)
+#define CPU_FTRS_PPC970 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+#define CPU_FTRS_POWER5 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+ CPU_FTR_MMCRA | CPU_FTR_SMT | \
+ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+ CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR)
+#define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
+ CPU_FTR_CTRL | CPU_FTR_PAUSE_ZERO)
+#define CPU_FTRS_COMPATIBLE (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
#endif
- CPU_FTRS_POSSIBLE =
#ifdef __powerpc64__
- CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |
- CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL |
- CPU_FTR_CI_LARGE_PAGE |
+#define CPU_FTRS_POSSIBLE \
+ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
+ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL | \
+ CPU_FTR_CI_LARGE_PAGE)
#else
+enum {
+ CPU_FTRS_POSSIBLE =
#if CLASSIC_PPC
CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
@@ -368,14 +369,18 @@
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 |
#endif
-#endif /* __powerpc64__ */
0,
+};
+#endif /* __powerpc64__ */
- CPU_FTRS_ALWAYS =
#ifdef __powerpc64__
- CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &
- CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL &
+#define CPU_FTRS_ALWAYS \
+ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
+ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL & \
+ CPU_FTRS_POSSIBLE)
#else
+enum {
+ CPU_FTRS_ALWAYS =
#if CLASSIC_PPC
CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
@@ -409,9 +414,9 @@
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 &
#endif
-#endif /* __powerpc64__ */
CPU_FTRS_POSSIBLE,
};
+#endif /* __powerpc64__ */
static inline int cpu_has_feature(unsigned long feature)
{
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index ce37882..77069df 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -82,13 +82,11 @@
/* This is used to identify firmware features which are available
* to the kernel.
*/
-extern unsigned long ppc64_firmware_features;
+extern unsigned long powerpc_firmware_features;
-static inline unsigned long firmware_has_feature(unsigned long feature)
-{
- return (FW_FEATURE_ALWAYS & feature) ||
- (FW_FEATURE_POSSIBLE & ppc64_firmware_features & feature);
-}
+#define firmware_has_feature(feature) \
+ ((FW_FEATURE_ALWAYS & (feature)) || \
+ (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
extern void system_reset_fwnmi(void);
extern void machine_check_fwnmi(void);
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
index e258778..608164c 100644
--- a/include/asm-powerpc/floppy.h
+++ b/include/asm-powerpc/floppy.h
@@ -35,6 +35,7 @@
#ifdef CONFIG_PCI
#include <linux/pci.h>
+#include <asm/ppc-pci.h> /* for ppc64_isabridge_dev */
#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io)
@@ -52,12 +53,12 @@
if (bus_addr
&& (addr != prev_addr || size != prev_size || dir != prev_dir)) {
/* different from last time -- unmap prev */
- pci_unmap_single(NULL, bus_addr, prev_size, prev_dir);
+ pci_unmap_single(ppc64_isabridge_dev, bus_addr, prev_size, prev_dir);
bus_addr = 0;
}
if (!bus_addr) /* need to map it */
- bus_addr = pci_map_single(NULL, addr, size, dir);
+ bus_addr = pci_map_single(ppc64_isabridge_dev, addr, size, dir);
/* remember this one as prev */
prev_addr = addr;
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index 38ca9ad..b72c04f 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -9,6 +9,7 @@
#define H_Closed 2 /* Resource closed */
#define H_Constrained 4 /* Resource request constrained to max allowed */
#define H_InProgress 14 /* Kind of like busy */
+#define H_Pending 17 /* returned from H_POLL_PENDING */
#define H_Continue 18 /* Returned from H_Join on success */
#define H_LongBusyStartRange 9900 /* Start of long busy range */
#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h
index 34daf7b..35ea69e 100644
--- a/include/asm-powerpc/hvconsole.h
+++ b/include/asm-powerpc/hvconsole.h
@@ -24,28 +24,18 @@
#ifdef __KERNEL__
/*
- * This is the max number of console adapters that can/will be found as
- * console devices on first stage console init. Any number beyond this range
- * can't be used as a console device but is still a valid tty device.
+ * PSeries firmware will only send/recv up to 16 bytes of character data per
+ * hcall.
*/
-#define MAX_NR_HVC_CONSOLES 16
+#define MAX_VIO_PUT_CHARS 16
+#define SIZE_VIO_GET_CHARS 16
-/* implemented by a low level driver */
-struct hv_ops {
- int (*get_chars)(uint32_t vtermno, char *buf, int count);
- int (*put_chars)(uint32_t vtermno, const char *buf, int count);
-};
+/*
+ * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count'
+ * parm is included to conform to put_chars() function pointer template
+ */
extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
-struct hvc_struct;
-
-/* Register a vterm and a slot index for use as a console (console_init) */
-extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
-/* register a vterm for hvc tty operation (module_init or hotplug add) */
-extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq,
- struct hv_ops *ops);
-/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
-extern int __devexit hvc_remove(struct hvc_struct *hp);
#endif /* __KERNEL__ */
#endif /* _PPC64_HVCONSOLE_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 5348b82..5ed8476 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -47,6 +47,7 @@
#endif
struct machdep_calls {
+ char *name;
#ifdef CONFIG_PPC64
void (*hpte_invalidate)(unsigned long slot,
unsigned long va,
@@ -85,9 +86,9 @@
void (*iommu_dev_setup)(struct pci_dev *dev);
void (*iommu_bus_setup)(struct pci_bus *bus);
void (*irq_bus_setup)(struct pci_bus *bus);
-#endif
+#endif /* CONFIG_PPC64 */
- int (*probe)(int platform);
+ int (*probe)(void);
void (*setup_arch)(void);
void (*init_early)(void);
/* Optional, may be NULL. */
@@ -158,6 +159,12 @@
/* Idle loop for this platform, leave empty for default idle loop */
void (*idle_loop)(void);
+ /*
+ * Function for waiting for work with reduced power in idle loop;
+ * called with interrupts disabled.
+ */
+ void (*power_save)(void);
+
/* Function to enable performance monitor counters for this
platform, called once per cpu. */
void (*enable_pmcs)(void);
@@ -170,13 +177,6 @@
May be NULL. */
void (*init)(void);
- void (*idle)(void);
- void (*power_save)(void);
-
- void (*heartbeat)(void);
- unsigned long heartbeat_reset;
- unsigned long heartbeat_count;
-
void (*setup_io_mappings)(void);
void (*early_serial_map)(void);
@@ -208,8 +208,6 @@
/* Called at then very end of pcibios_init() */
void (*pcibios_after_init)(void);
- /* this is for modules, since _machine can be a define -- Cort */
- int ppc_machine;
#endif /* CONFIG_PPC32 */
/* Called to shutdown machine specific hardware not already controlled
@@ -242,10 +240,29 @@
#endif /* CONFIG_KEXEC */
};
-extern void default_idle(void);
-extern void native_idle(void);
+extern void power4_idle(void);
+extern void ppc6xx_idle(void);
+/*
+ * ppc_md contains a copy of the machine description structure for the
+ * current platform. machine_id contains the initial address where the
+ * description was found during boot.
+ */
extern struct machdep_calls ppc_md;
+extern struct machdep_calls *machine_id;
+
+#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
+
+#define define_machine(name) struct machdep_calls mach_##name __machine_desc =
+#define machine_is(name) \
+ ({ \
+ extern struct machdep_calls mach_##name \
+ __attribute__((weak)); \
+ machine_id == &mach_##name; \
+ })
+
+extern void probe_machine(void);
+
extern char cmd_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_PPC_PMAC
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
index 338e6a7..5b33994 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/include/asm-powerpc/oprofile_impl.h
@@ -17,9 +17,6 @@
/* Per-counter configuration as set via oprofilefs. */
struct op_counter_config {
-#ifdef __powerpc64__
- unsigned long valid;
-#endif
unsigned long enabled;
unsigned long event;
unsigned long count;
@@ -38,9 +35,6 @@
#endif
unsigned long enable_kernel;
unsigned long enable_user;
-#ifdef CONFIG_PPC64
- unsigned long backtrace_spinlocks;
-#endif
};
/* Per-arch configuration */
@@ -56,17 +50,12 @@
int num_counters;
};
-#ifdef CONFIG_FSL_BOOKE
extern struct op_powerpc_model op_model_fsl_booke;
-#else /* Otherwise, it's classic */
-
-#ifdef CONFIG_PPC64
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
-
-#else /* Otherwise, CONFIG_PPC32 */
extern struct op_powerpc_model op_model_7450;
-#endif
+
+#ifndef CONFIG_FSL_BOOKE
/* All the classic PPC parts use these */
static inline unsigned int ctr_read(unsigned int i)
@@ -134,5 +123,7 @@
}
#endif /* !CONFIG_FSL_BOOKE */
+extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
index 4465b95..706325f 100644
--- a/include/asm-powerpc/paca.h
+++ b/include/asm-powerpc/paca.h
@@ -105,5 +105,7 @@
extern struct paca_struct paca[];
+void setup_boot_paca(void);
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PACA_H */
diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h
index 464301c..184a7a4 100644
--- a/include/asm-powerpc/percpu.h
+++ b/include/asm-powerpc/percpu.h
@@ -27,7 +27,7 @@
#define percpu_modcopy(pcpudst, src, size) \
do { \
unsigned int __i; \
- for_each_cpu(__i) \
+ for_each_possible_cpu(__i) \
memcpy((pcpudst)+__per_cpu_offset(__i), \
(src), (size)); \
} while (0)
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
index 3221628..d3599cc 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/include/asm-powerpc/pmac_feature.h
@@ -305,7 +305,7 @@
extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
extern void pmac_call_early_video_resume(void);
-#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
+#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
/* The AGP driver registers itself here */
extern void pmac_register_agp_pm(struct pci_dev *bridge,
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index 1c64a21..93f83ef 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -22,22 +22,6 @@
* -- BenH.
*/
-/* Platforms codes (to be obsoleted) */
-#define PLATFORM_PSERIES 0x0100
-#define PLATFORM_PSERIES_LPAR 0x0101
-#define PLATFORM_ISERIES_LPAR 0x0201
-#define PLATFORM_LPAR 0x0001
-#define PLATFORM_POWERMAC 0x0400
-#define PLATFORM_MAPLE 0x0500
-#define PLATFORM_PREP 0x0600
-#define PLATFORM_CHRP 0x0700
-#define PLATFORM_CELL 0x1000
-
-/* Compat platform codes for 32 bits */
-#define _MACH_prep PLATFORM_PREP
-#define _MACH_Pmac PLATFORM_POWERMAC
-#define _MACH_chrp PLATFORM_CHRP
-
/* PREP sub-platform types see residual.h for these */
#define _PREP_Motorola 0x01 /* motorola prep */
#define _PREP_Firm 0x02 /* firmworks prep */
@@ -49,18 +33,14 @@
#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
-#ifdef __KERNEL__
-#define platform_is_pseries() (_machine == PLATFORM_PSERIES || \
- _machine == PLATFORM_PSERIES_LPAR)
+#if defined(__KERNEL__) && defined(CONFIG_PPC32)
-#if defined(CONFIG_PPC_MULTIPLATFORM)
-extern int _machine;
+extern int _chrp_type;
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_PREP
/* what kind of prep workstation we are */
extern int _prep_type;
-extern int _chrp_type;
/*
* This is used to identify the board type from a given PReP board
@@ -70,17 +50,14 @@
extern unsigned char ucBoardRev;
extern unsigned char ucBoardRevMaj, ucBoardRevMin;
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC_PREP */
-#elif defined(CONFIG_PPC_ISERIES)
-/*
- * iSeries is soon to become MULTIPLATFORM hopefully ...
- */
-#define _machine PLATFORM_ISERIES_LPAR
-#else
+#ifndef CONFIG_PPC_MULTIPLATFORM
#define _machine 0
#endif /* CONFIG_PPC_MULTIPLATFORM */
-#endif /* __KERNEL__ */
+
+#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
+
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
@@ -251,6 +228,10 @@
#define cpu_relax() barrier()
#endif
+/* Check that a certain kernel stack pointer is valid in task_struct p */
+int validate_sp(unsigned long sp, struct task_struct *p,
+ unsigned long nbytes);
+
/*
* Prefetch macros.
*/
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 782e13a..97ef1cd 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -149,12 +149,14 @@
extern void of_node_put(struct device_node *node);
/* For scanning the flat device-tree at boot time */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data);
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size);
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data);
+extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 72bfe3a..bd467bf 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -622,6 +622,10 @@
extern unsigned long scom970_read(unsigned int address);
extern void scom970_write(unsigned int address, unsigned long value);
+#else
+#define ppc64_runlatch_on()
+#define ppc64_runlatch_off()
+
#endif /* CONFIG_PPC64 */
#define __get_SP() ({unsigned long sp; \
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
index 98581e5..4a716f7 100644
--- a/include/asm-powerpc/smp.h
+++ b/include/asm-powerpc/smp.h
@@ -29,7 +29,6 @@
#endif
extern int boot_cpuid;
-extern int boot_cpuid_phys;
extern void cpu_die(void);
@@ -99,6 +98,7 @@
#else
/* 32-bit */
#ifndef CONFIG_SMP
+extern int boot_cpuid_phys;
#define get_hard_smp_processor_id(cpu) boot_cpuid_phys
#define set_hard_smp_processor_id(cpu, phys)
#endif
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 38bacf2..f431d8b0 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -110,6 +110,7 @@
char *name;
unsigned long local_store_phys;
u8 *local_store;
+ unsigned long problem_phys;
struct spu_problem __iomem *problem;
struct spu_priv1 __iomem *priv1;
struct spu_priv2 __iomem *priv2;
@@ -137,6 +138,7 @@
void (* wbox_callback)(struct spu *spu);
void (* ibox_callback)(struct spu *spu);
void (* stop_callback)(struct spu *spu);
+ void (* mfc_callback)(struct spu *spu);
char irq_c0[8];
char irq_c1[8];
@@ -149,6 +151,14 @@
int spu_irq_class_1_bottom(struct spu *spu);
void spu_irq_setaffinity(struct spu *spu, int cpu);
+/* system callbacks from the SPU */
+struct spu_syscall_block {
+ u64 nr_ret;
+ u64 parm[6];
+};
+extern long spu_sys_callback(struct spu_syscall_block *s);
+
+/* syscalls implemented in spufs */
extern struct spufs_calls {
asmlinkage long (*create_thread)(const char __user *name,
unsigned int flags, mode_t mode);
@@ -399,7 +409,6 @@
#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS)
u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */
-
/* Interrupt Area */
u64 int_mask_RW[3]; /* 0x100 */
#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
new file mode 100644
index 0000000..c2fe79d
--- /dev/null
+++ b/include/asm-powerpc/syscalls.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_POWERPC_SYSCALLS_H
+#define __ASM_POWERPC_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/signal.h>
+
+struct new_utsname;
+struct pt_regs;
+struct rtas_args;
+struct sigaction;
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, off_t offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3, unsigned long a4,
+ unsigned long a5, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
+ int __user *parent_tidp, void __user *child_threadptr,
+ int __user *child_tidp, int p6, struct pt_regs *regs);
+asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
+ unsigned long p3, unsigned long p4, unsigned long p5,
+ unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
+ unsigned long p3, unsigned long p4, unsigned long p5,
+ unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_pipe(int __user *fildes);
+asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact, size_t sigsetsize);
+asmlinkage int sys_ipc(uint call, int first, unsigned long second,
+ long third, void __user *ptr, long fifth);
+asmlinkage long ppc64_personality(unsigned long personality);
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
+asmlinkage time_t sys64_time(time_t __user * tloc);
+asmlinkage long ppc_newuname(struct new_utsname __user * name);
+
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+ size_t sigsetsize);
+
+#ifndef __powerpc64__
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+ stack_t __user *uoss, int r5, int r6, int r7, int r8,
+ struct pt_regs *regs);
+#else /* __powerpc64__ */
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+ stack_t __user *uoss, unsigned long r5, unsigned long r6,
+ unsigned long r7, unsigned long r8, struct pt_regs *regs);
+#endif /* __powerpc64__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 65f5a7b..d075725 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -365,8 +365,11 @@
* powers of 2 writes until it reaches sufficient alignment).
*
* Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
*/
-#define NET_IP_ALIGN 0
+#define NET_IP_ALIGN 0
+#define NET_SKB_PAD L1_CACHE_BYTES
#endif
#define arch_align_stack(x) (x)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 3555699..536ba08 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -301,8 +301,9 @@
#define __NR_pselect6 280
#define __NR_ppoll 281
#define __NR_unshare 282
+#define __NR_splice 283
-#define __NR_syscalls 283
+#define __NR_syscalls 284
#ifdef __KERNEL__
#define __NR__exit __NR_exit
@@ -425,6 +426,7 @@
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/linkage.h>
+#include <asm/syscalls.h>
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
@@ -460,44 +462,10 @@
* System call prototypes.
*/
#ifdef __KERNEL_SYSCALLS__
-extern pid_t setsid(void);
-extern int write(int fd, const char *buf, off_t count);
-extern int read(int fd, char *buf, off_t count);
-extern off_t lseek(int fd, off_t offset, int count);
-extern int dup(int fd);
extern int execve(const char *file, char **argv, char **envp);
-extern int open(const char *file, int flag, int mode);
-extern int close(int fd);
-extern pid_t waitpid(pid_t pid, int *wait_stat, int options);
#endif /* __KERNEL_SYSCALLS__ */
/*
- * Functions that implement syscalls.
- */
-unsigned long sys_mmap(unsigned long addr, size_t len, unsigned long prot,
- unsigned long flags, unsigned long fd, off_t offset);
-unsigned long sys_mmap2(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-struct pt_regs;
-int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
- unsigned long a3, unsigned long a4, unsigned long a5,
- struct pt_regs *regs);
-int sys_clone(unsigned long clone_flags, unsigned long usp,
- int __user *parent_tidp, void __user *child_threadptr,
- int __user *child_tidp, int p6, struct pt_regs *regs);
-int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3,
- unsigned long p4, unsigned long p5, unsigned long p6,
- struct pt_regs *regs);
-int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3,
- unsigned long p4, unsigned long p5, unsigned long p6,
- struct pt_regs *regs);
-int sys_pipe(int __user *fildes);
-struct sigaction;
-long sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact, size_t sigsetsize);
-
-/*
* "Conditional" syscalls
*
* What we want is __attribute__((weak,alias("sys_ni_syscall"))),
diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h
index 7aa9208..8a94f0e 100644
--- a/include/asm-powerpc/vdso_datapage.h
+++ b/include/asm-powerpc/vdso_datapage.h
@@ -55,6 +55,9 @@
__u32 minor; /* Minor number 0x14 */
} version;
+ /* Note about the platform flags: it now only contains the lpar
+ * bit. The actual platform number is dead and burried
+ */
__u32 platform; /* Platform flags 0x18 */
__u32 processor; /* Processor type 0x1C */
__u64 processorCount; /* # of physical processors 0x20 */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
index a3e8a45..e1a0a7b 100644
--- a/include/asm-ppc/machdep.h
+++ b/include/asm-ppc/machdep.h
@@ -19,6 +19,18 @@
struct seq_file;
struct file;
+/*
+ * This is for compatibility with ARCH=powerpc.
+ */
+#define machine_is(x) __MACHINE_IS_##x
+#define __MACHINE_IS_powermac 0
+#define __MACHINE_IS_chrp 0
+#ifdef CONFIG_PPC_PREP
+#define __MACHINE_IS_prep 1
+#else
+#define __MACHINE_IS_prep 0
+#endif
+
/* We export this macro for external modules like Alsa to know if
* ppc_md.feature_call is implemented or not
*/
@@ -44,7 +56,7 @@
void (*power_off)(void);
void (*halt)(void);
- void (*idle)(void);
+ void (*idle_loop)(void);
void (*power_save)(void);
long (*time_init)(void); /* Optional, may be NULL */
@@ -104,9 +116,6 @@
unsigned long size,
pgprot_t vma_prot);
- /* this is for modules, since _machine can be a define -- Cort */
- int ppc_machine;
-
/* Motherboard/chipset features. This is a kind of general purpose
* hook used to control some machine specific features (like reset
* lines, chip power control, etc...).
diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
index 6167f74..7e98428 100644
--- a/include/asm-ppc/mpc52xx.h
+++ b/include/asm-ppc/mpc52xx.h
@@ -355,6 +355,7 @@
u32 snoop_window; /* XLB + 0x70 */
};
+#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
/* Clock Distribution control */
@@ -427,6 +428,9 @@
extern void mpc52xx_find_bridges(void);
+extern void mpc52xx_setup_cpu(void);
+
+
/* Matching of PSC function */
struct mpc52xx_psc_func {
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
index e1c62da..570b355 100644
--- a/include/asm-ppc/pgtable.h
+++ b/include/asm-ppc/pgtable.h
@@ -837,7 +837,8 @@
*/
#define pgtable_cache_init() do { } while (0)
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+ pmd_t **pmdp);
#include <asm-generic/pgtable.h>
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
index 6d431d6..adc5ae7 100644
--- a/include/asm-ppc/prom.h
+++ b/include/asm-ppc/prom.h
@@ -8,126 +8,19 @@
#ifndef _PPC_PROM_H
#define _PPC_PROM_H
-#include <linux/config.h>
-#include <linux/types.h>
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct address_range {
- unsigned int space;
- unsigned int address;
- unsigned int size;
-};
-
-struct interrupt_info {
- int line;
- int sense; /* +ve/-ve logic, edge or level, etc. */
-};
-
+/* This is used in arch/ppc/mm/mem_pieces.h */
struct reg_property {
unsigned int address;
unsigned int size;
};
-struct property {
- char *name;
- int length;
- unsigned char *value;
- struct property *next;
-};
-
/*
- * Note: don't change this structure for now or you'll break BootX !
- */
-struct device_node {
- char *name;
- char *type;
- phandle node;
- int n_addrs;
- struct address_range *addrs;
- int n_intrs;
- struct interrupt_info *intrs;
- char *full_name;
- struct property *properties;
- struct device_node *parent;
- struct device_node *child;
- struct device_node *sibling;
- struct device_node *next; /* next device of same type */
- struct device_node *allnext; /* next in list of all nodes */
-};
-
-struct prom_args;
-typedef void (*prom_entry)(struct prom_args *);
-
-/* OBSOLETE: Old style node lookup */
-extern struct device_node *find_devices(const char *name);
-extern struct device_node *find_type_devices(const char *type);
-extern struct device_node *find_path_device(const char *path);
-extern struct device_node *find_compatible_devices(const char *type,
- const char *compat);
-extern struct device_node *find_all_nodes(void);
-
-/* New style node lookup */
-extern struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name);
-extern struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type);
-extern struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compat);
-extern struct device_node *of_find_node_by_path(const char *path);
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_get_parent(const struct device_node *node);
-extern struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* Other Prototypes */
-extern void abort(void);
-extern unsigned long prom_init(int, int, prom_entry);
-extern void prom_print(const char *msg);
-extern void relocate_nodes(void);
-extern void finish_device_tree(void);
-extern int device_is_compatible(struct device_node *device, const char *);
-extern int machine_is_compatible(const char *compat);
-extern unsigned char *get_property(struct device_node *node, const char *name,
- int *lenp);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern void prom_get_irq_senses(unsigned char *, int, int);
-extern int prom_n_addr_cells(struct device_node* np);
-extern int prom_n_size_cells(struct device_node* np);
-
-extern struct resource*
-request_OF_resource(struct device_node* node, int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-extern void print_properties(struct device_node *node);
-extern int call_rtas(const char *service, int nargs, int nret,
- unsigned long *outputs, ...);
-
-/*
- * PCI <-> OF matching functions
- */
-struct pci_bus;
-struct pci_dev;
-extern int pci_device_from_OF_node(struct device_node *node,
- u8* bus, u8* devfn);
-extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
-extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
-extern void pci_create_OF_bus_map(void);
-
-/*
- * When we call back to the Open Firmware client interface, we usually
- * have to do that before the kernel is relocated to its final location
- * (this is because we can't use OF after we have overwritten the
- * exception vectors with our exception handlers). These macros assist
- * in performing the address calculations that we need to do to access
- * data when the kernel is running at an address that is different from
- * the address that the kernel is linked at. The reloc_offset() function
- * returns the difference between these two addresses and the macros
- * simplify the process of adding or subtracting this offset to/from
- * pointer values. See arch/ppc/kernel/prom.c for how these are used.
+ * These macros assist in performing the address calculations that we
+ * need to do to access data when the kernel is running at an address
+ * that is different from the address that the kernel is linked at.
+ * The reloc_offset() function returns the difference between these
+ * two addresses and the macros simplify the process of adding or
+ * subtracting this offset to/from pointer values.
*/
extern unsigned long reloc_offset(void);
extern unsigned long add_reloc_offset(unsigned long);
@@ -136,45 +29,12 @@
#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x)))
#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x)))
-
/*
- * OF address retreival & translation
- */
-
-
-/* Translate an OF address block into a CPU physical address
- */
-#define OF_BAD_ADDR ((u64)-1)
-extern u64 of_translate_address(struct device_node *np, u32 *addr);
-
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern u32 *of_get_address(struct device_node *dev, int index,
- u64 *size, unsigned int *flags);
-extern u32 *of_get_pci_address(struct device_node *dev, int bar_no,
- u64 *size, unsigned int *flags);
-
-/* Get an address as a resource. Note that if your address is
- * a PIO address, the conversion will fail if the physical address
- * can't be internally converted to an IO token with
- * pci_address_to_pio(), that is because it's either called to early
- * or it can't be matched to any host bridge IO space
- */
-extern int of_address_to_resource(struct device_node *dev, int index,
- struct resource *r);
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
- struct resource *r);
-
-#ifndef CONFIG_PPC_OF
-/*
- * Fallback definitions for builds where we don't have prom.c included.
+ * Fallback definitions since we don't support OF in arch/ppc any more.
*/
#define machine_is_compatible(x) 0
#define of_find_compatible_node(f, t, c) NULL
#define get_property(p, n, l) NULL
-#endif
#endif /* _PPC_PROM_H */
#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
index 485a924..b74af54 100644
--- a/include/asm-ppc/serial.h
+++ b/include/asm-ppc/serial.h
@@ -41,15 +41,10 @@
#else
/*
- * XXX Assume for now it has PC-style ISA serial ports.
- * This is true for PReP and CHRP at least.
+ * XXX Assume it has PC-style ISA serial ports - true for PReP at least.
*/
#include <asm/pc_serial.h>
-#if defined(CONFIG_MAC_SERIAL)
-#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2)
-#endif
-
#endif /* !CONFIG_GEMINI and others */
#endif /* __ASM_SERIAL_H__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-s390/percpu.h b/include/asm-s390/percpu.h
index e10ed87..436d216 100644
--- a/include/asm-s390/percpu.h
+++ b/include/asm-s390/percpu.h
@@ -46,7 +46,7 @@
#define percpu_modcopy(pcpudst, src, size) \
do { \
unsigned int __i; \
- for_each_cpu(__i) \
+ for_each_possible_cpu(__i) \
memcpy((pcpudst)+__per_cpu_offset[__i], \
(src), (size)); \
} while (0)
diff --git a/include/asm-um/desc.h b/include/asm-um/desc.h
index ac1d2a2..4ec34a5 100644
--- a/include/asm-um/desc.h
+++ b/include/asm-um/desc.h
@@ -1,6 +1,16 @@
#ifndef __UM_DESC_H
#define __UM_DESC_H
-#include "asm/arch/desc.h"
+/* Taken from asm-i386/desc.h, it's the only thing we need. The rest wouldn't
+ * compile, and has never been used. */
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
#endif
diff --git a/include/asm-um/host_ldt-i386.h b/include/asm-um/host_ldt-i386.h
new file mode 100644
index 0000000..b27cb0a
--- /dev/null
+++ b/include/asm-um/host_ldt-i386.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_HOST_LDT_I386_H
+#define __ASM_HOST_LDT_I386_H
+
+#include "asm/arch/ldt.h"
+
+/*
+ * macros stolen from include/asm-i386/desc.h
+ */
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ 0x7000)
+
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
+
+#endif
diff --git a/include/asm-um/host_ldt-x86_64.h b/include/asm-um/host_ldt-x86_64.h
new file mode 100644
index 0000000..74a63f7
--- /dev/null
+++ b/include/asm-um/host_ldt-x86_64.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_HOST_LDT_X86_64_H
+#define __ASM_HOST_LDT_X86_64_H
+
+#include "asm/arch/ldt.h"
+
+/*
+ * macros stolen from include/asm-x86_64/desc.h
+ */
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+/* Don't allow setting of the lm bit. It is useless anyways because
+ * 64bit system calls require __USER_CS. */
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ /* ((info)->lm << 21) | */ \
+ 0x7000)
+
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 && \
+ (info)->lm == 0)
+
+#endif
diff --git a/include/asm-um/ldt-i386.h b/include/asm-um/ldt-i386.h
deleted file mode 100644
index 175722a..0000000
--- a/include/asm-um/ldt-i386.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_I386_H
-#define __ASM_LDT_I386_H
-
-#include "asm/semaphore.h"
-#include "asm/arch/ldt.h"
-
-struct mmu_context_skas;
-extern void ldt_host_info(void);
-extern long init_new_ldt(struct mmu_context_skas * to_mm,
- struct mmu_context_skas * from_mm);
-extern void free_ldt(struct mmu_context_skas * mm);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct semaphore semaphore;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-/*
- * macros stolen from include/asm-i386/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 )
-
-#endif
diff --git a/include/asm-um/ldt-x86_64.h b/include/asm-um/ldt-x86_64.h
deleted file mode 100644
index 96b35aa..0000000
--- a/include/asm-um/ldt-x86_64.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_X86_64_H
-#define __ASM_LDT_X86_64_H
-
-#include "asm/semaphore.h"
-#include "asm/arch/ldt.h"
-
-struct mmu_context_skas;
-extern void ldt_host_info(void);
-extern long init_new_ldt(struct mmu_context_skas * to_mm,
- struct mmu_context_skas * from_mm);
-extern void free_ldt(struct mmu_context_skas * mm);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct semaphore semaphore;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-/*
- * macros stolen from include/asm-x86_64/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-/* Don't allow setting of the lm bit. It is useless anyways because
- * 64bit system calls require __USER_CS. */
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- /* ((info)->lm << 21) | */ \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 && \
- (info)->lm == 0)
-
-#endif
diff --git a/include/asm-um/ldt.h b/include/asm-um/ldt.h
new file mode 100644
index 0000000..96f82a4
--- /dev/null
+++ b/include/asm-um/ldt.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include "asm/semaphore.h"
+#include "asm/host_ldt.h"
+
+struct mmu_context_skas;
+extern void ldt_host_info(void);
+extern long init_new_ldt(struct mmu_context_skas * to_mm,
+ struct mmu_context_skas * from_mm);
+extern void free_ldt(struct mmu_context_skas * mm);
+
+#define LDT_PAGES_MAX \
+ ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+ (PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+ ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+ __u32 a;
+ __u32 b;
+};
+
+typedef struct uml_ldt {
+ int entry_count;
+ struct semaphore semaphore;
+ union {
+ struct ldt_entry * pages[LDT_PAGES_MAX];
+ struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+ } u;
+} uml_ldt_t;
+
+#endif
diff --git a/include/asm-um/processor-i386.h b/include/asm-um/processor-i386.h
index 4108a57..595f1c3 100644
--- a/include/asm-um/processor-i386.h
+++ b/include/asm-um/processor-i386.h
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -6,21 +6,48 @@
#ifndef __UM_PROCESSOR_I386_H
#define __UM_PROCESSOR_I386_H
+#include "linux/string.h"
+#include "asm/host_ldt.h"
+#include "asm/segment.h"
+
extern int host_has_xmm;
extern int host_has_cmov;
/* include faultinfo structure */
#include "sysdep/faultinfo.h"
+struct uml_tls_struct {
+ struct user_desc tls;
+ unsigned flushed:1;
+ unsigned present:1;
+};
+
struct arch_thread {
+ struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
unsigned long debugregs[8];
int debugregs_seq;
struct faultinfo faultinfo;
};
-#define INIT_ARCH_THREAD { .debugregs = { [ 0 ... 7 ] = 0 }, \
- .debugregs_seq = 0, \
- .faultinfo = { 0, 0, 0 } }
+#define INIT_ARCH_THREAD { \
+ .tls_array = { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
+ { .present = 0, .flushed = 0 } }, \
+ .debugregs = { [ 0 ... 7 ] = 0 }, \
+ .debugregs_seq = 0, \
+ .faultinfo = { 0, 0, 0 } \
+}
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+ /* Clear any TLS still hanging */
+ memset(&thread->tls_array, 0, sizeof(thread->tls_array));
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+ memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
+}
#include "asm/arch/user.h"
diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h
index e1e1255..10609af 100644
--- a/include/asm-um/processor-x86_64.h
+++ b/include/asm-um/processor-x86_64.h
@@ -28,6 +28,15 @@
.debugregs_seq = 0, \
.faultinfo = { 0, 0, 0 } }
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+}
+
#include "asm/arch/user.h"
#define current_text_addr() \
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
index 46599ac..5034843 100644
--- a/include/asm-um/ptrace-generic.h
+++ b/include/asm-um/ptrace-generic.h
@@ -28,7 +28,7 @@
union uml_pt_regs regs;
};
-#define EMPTY_REGS { regs : EMPTY_UML_PT_REGS }
+#define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
@@ -60,17 +60,9 @@
extern void send_sigtrap(struct task_struct *tsk, union uml_pt_regs *regs,
int error_code);
-#endif
+extern int arch_copy_tls(struct task_struct *new);
+extern void clear_flushed_tls(struct task_struct *task);
#endif
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/include/asm-um/ptrace-i386.h b/include/asm-um/ptrace-i386.h
index fe882b9..30656c9 100644
--- a/include/asm-um/ptrace-i386.h
+++ b/include/asm-um/ptrace-i386.h
@@ -8,8 +8,11 @@
#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
+#include "linux/compiler.h"
#include "sysdep/ptrace.h"
#include "asm/ptrace-generic.h"
+#include "asm/host_ldt.h"
+#include "choose-mode.h"
#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
@@ -38,15 +41,31 @@
#define user_mode(r) UPT_IS_USER(&(r)->regs)
-#endif
+extern int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc);
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+extern int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc);
+
+extern int do_set_thread_area_skas(struct user_desc *info);
+extern int do_get_thread_area_skas(struct user_desc *info);
+
+extern int do_set_thread_area_tt(struct user_desc *info);
+extern int do_get_thread_area_tt(struct user_desc *info);
+
+extern int arch_switch_tls_skas(struct task_struct *from, struct task_struct *to);
+extern int arch_switch_tls_tt(struct task_struct *from, struct task_struct *to);
+
+static inline int do_get_thread_area(struct user_desc *info)
+{
+ return CHOOSE_MODE_PROC(do_get_thread_area_tt, do_get_thread_area_skas, info);
+}
+
+static inline int do_set_thread_area(struct user_desc *info)
+{
+ return CHOOSE_MODE_PROC(do_set_thread_area_tt, do_set_thread_area_skas, info);
+}
+
+struct task_struct;
+
+#endif
diff --git a/include/asm-um/ptrace-x86_64.h b/include/asm-um/ptrace-x86_64.h
index be51219..c894e68 100644
--- a/include/asm-um/ptrace-x86_64.h
+++ b/include/asm-um/ptrace-x86_64.h
@@ -8,6 +8,8 @@
#define __UM_PTRACE_X86_64_H
#include "linux/compiler.h"
+#include "asm/errno.h"
+#include "asm/host_ldt.h"
#define signal_fault signal_fault_x86_64
#define __FRAME_OFFSETS /* Needed to get the R* macros */
@@ -63,15 +65,26 @@
#define profile_pc(regs) PT_REGS_IP(regs)
-#endif
+static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
+
+static inline void arch_switch_to_tt(struct task_struct *from,
+ struct task_struct *to)
+{
+}
+
+static inline void arch_switch_to_skas(struct task_struct *from,
+ struct task_struct *to)
+{
+}
+
+#endif
diff --git a/include/asm-um/segment.h b/include/asm-um/segment.h
index 55e4030..45183fc 100644
--- a/include/asm-um/segment.h
+++ b/include/asm-um/segment.h
@@ -1,4 +1,10 @@
#ifndef __UM_SEGMENT_H
#define __UM_SEGMENT_H
+extern int host_gdt_entry_tls_min;
+
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_TLS_MIN host_gdt_entry_tls_min
+#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
#endif
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 17b6b07..f166b98 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -27,14 +27,14 @@
#define INIT_THREAD_INFO(tsk) \
{ \
- task: &tsk, \
- exec_domain: &default_exec_domain, \
- flags: 0, \
- cpu: 0, \
- preempt_count: 1, \
- addr_limit: KERNEL_DS, \
- restart_block: { \
- fn: do_no_restart_syscall, \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
}, \
}
diff --git a/include/asm-um/uaccess.h b/include/asm-um/uaccess.h
index 4e460d6..bea5a01 100644
--- a/include/asm-um/uaccess.h
+++ b/include/asm-um/uaccess.h
@@ -57,7 +57,7 @@
({ \
const __typeof__((*(ptr))) __user *private_ptr = (ptr); \
(access_ok(VERIFY_READ, private_ptr, sizeof(*private_ptr)) ? \
- __get_user(x, private_ptr) : ((x) = 0, -EFAULT)); \
+ __get_user(x, private_ptr) : ((x) = (__typeof__(*ptr))0, -EFAULT)); \
})
#define __put_user(x, ptr) \
diff --git a/include/asm-x86_64/local.h b/include/asm-x86_64/local.h
index bf14803..cd17945 100644
--- a/include/asm-x86_64/local.h
+++ b/include/asm-x86_64/local.h
@@ -5,7 +5,7 @@
typedef struct
{
- volatile unsigned long counter;
+ volatile long counter;
} local_t;
#define LOCAL_INIT(i) { (i) }
@@ -13,7 +13,7 @@
#define local_read(v) ((v)->counter)
#define local_set(v,i) (((v)->counter) = (i))
-static __inline__ void local_inc(local_t *v)
+static inline void local_inc(local_t *v)
{
__asm__ __volatile__(
"incq %0"
@@ -21,7 +21,7 @@
:"m" (v->counter));
}
-static __inline__ void local_dec(local_t *v)
+static inline void local_dec(local_t *v)
{
__asm__ __volatile__(
"decq %0"
@@ -29,7 +29,7 @@
:"m" (v->counter));
}
-static __inline__ void local_add(unsigned int i, local_t *v)
+static inline void local_add(long i, local_t *v)
{
__asm__ __volatile__(
"addq %1,%0"
@@ -37,7 +37,7 @@
:"ir" (i), "m" (v->counter));
}
-static __inline__ void local_sub(unsigned int i, local_t *v)
+static inline void local_sub(long i, local_t *v)
{
__asm__ __volatile__(
"subq %1,%0"
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index fcc5163..f21ff2c 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -609,8 +609,10 @@
__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
#define __NR_get_robust_list 274
__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+#define __NR_splice 275
+__SYSCALL(__NR_splice, sys_splice)
-#define __NR_syscall_max __NR_get_robust_list
+#define __NR_syscall_max __NR_splice
#ifndef __NO_STUBS
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index bb9e543..75e91f5 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -19,20 +19,25 @@
struct backlight_properties {
/* Owner module */
struct module *owner;
- /* Get the backlight power status (0: full on, 1..3: power saving
- modes; 4: full off), see FB_BLANK_XXX */
- int (*get_power)(struct backlight_device *);
- /* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
- int (*set_power)(struct backlight_device *, int power);
- /* Maximal value for brightness (read-only) */
- int max_brightness;
- /* Get current backlight brightness */
+
+ /* Notify the backlight driver some property has changed */
+ int (*update_status)(struct backlight_device *);
+ /* Return the current backlight brightness (accounting for power,
+ fb_blank etc.) */
int (*get_brightness)(struct backlight_device *);
- /* Set backlight brightness (0..max_brightness) */
- int (*set_brightness)(struct backlight_device *, int brightness);
/* Check if given framebuffer device is the one bound to this backlight;
return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
int (*check_fb)(struct fb_info *);
+
+ /* Current User requested brightness (0 - max_brightness) */
+ int brightness;
+ /* Maximal value for brightness (read-only) */
+ int max_brightness;
+ /* Current FB Power mode (0: full on, 1..3: power saving
+ modes; 4: full off), see FB_BLANK_XXX */
+ int power;
+ /* FB Blanking active? (values as for power) */
+ int fb_blank;
};
struct backlight_device {
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index d10bd30..836325e 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -275,6 +275,7 @@
/* appendix may either be NULL or be used for transname suffixes */
extern struct dentry * d_lookup(struct dentry *, struct qstr *);
extern struct dentry * __d_lookup(struct dentry *, struct qstr *);
+extern struct dentry * d_hash_and_lookup(struct dentry *, struct qstr *);
/* validate "insecure" dentry pointer */
extern int d_validate(struct dentry *, struct dentry *);
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
index b2913bb..e8e7471 100644
--- a/include/linux/fadvise.h
+++ b/include/linux/fadvise.h
@@ -18,10 +18,4 @@
#define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */
#endif
-/*
- * Linux-specific fadvise() extensions:
- */
-#define LINUX_FADV_ASYNC_WRITE 32 /* Start writeout on range */
-#define LINUX_FADV_WRITE_WAIT 33 /* Wait upon writeout to range */
-
#endif /* FADVISE_H_INCLUDED */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index d03fadf..315d897 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -839,12 +839,10 @@
#define FB_LEFT_POS(bpp) (32 - bpp)
#define FB_SHIFT_HIGH(val, bits) ((val) >> (bits))
#define FB_SHIFT_LOW(val, bits) ((val) << (bits))
-#define FB_BIT_NR(b) (7 - (b))
#else
#define FB_LEFT_POS(bpp) (0)
#define FB_SHIFT_HIGH(val, bits) ((val) << (bits))
#define FB_SHIFT_LOW(val, bits) ((val) >> (bits))
-#define FB_BIT_NR(b) (b)
#endif
/*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 408fe89..4ed7e60 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -757,6 +757,13 @@
extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
extern int fcntl_getlease(struct file *filp);
+/* fs/sync.c */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
+ int flags);
+
/* fs/locks.c */
extern void locks_init_lock(struct file_lock *);
extern void locks_copy_lock(struct file_lock *, struct file_lock *);
@@ -1032,6 +1039,8 @@
int (*check_flags)(int);
int (*dir_notify)(struct file *filp, unsigned long arg);
int (*flock) (struct file *, int, struct file_lock *);
+ ssize_t (*splice_write)(struct inode *, struct file *, size_t, unsigned int);
+ ssize_t (*splice_read)(struct file *, struct inode *, size_t, unsigned int);
};
struct inode_operations {
@@ -1411,6 +1420,7 @@
#endif
/* fs/char_dev.c */
+#define CHRDEV_MAJOR_HASH_SIZE 255
extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
extern int register_chrdev(unsigned int, const char *,
@@ -1418,25 +1428,17 @@
extern int unregister_chrdev(unsigned int, const char *);
extern void unregister_chrdev_region(dev_t, unsigned);
extern int chrdev_open(struct inode *, struct file *);
-extern int get_chrdev_list(char *);
-extern void *acquire_chrdev_list(void);
-extern int count_chrdev_list(void);
-extern void *get_next_chrdev(void *);
-extern int get_chrdev_info(void *, int *, char **);
-extern void release_chrdev_list(void *);
+extern void chrdev_show(struct seq_file *,off_t);
/* fs/block_dev.c */
+#define BLKDEV_MAJOR_HASH_SIZE 255
#define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */
extern const char *__bdevname(dev_t, char *buffer);
extern const char *bdevname(struct block_device *bdev, char *buffer);
extern struct block_device *lookup_bdev(const char *);
extern struct block_device *open_bdev_excl(const char *, int, void *);
extern void close_bdev_excl(struct block_device *);
-extern void *acquire_blkdev_list(void);
-extern int count_blkdev_list(void);
-extern void *get_next_blkdev(void *);
-extern int get_blkdev_info(void *, int *, char **);
-extern void release_blkdev_list(void *);
+extern void blkdev_show(struct seq_file *,off_t);
extern void init_special_inode(struct inode *, umode_t, dev_t);
@@ -1609,6 +1611,8 @@
extern void do_generic_mapping_read(struct address_space *mapping,
struct file_ra_state *, struct file *,
loff_t *, read_descriptor_t *, read_actor_t);
+extern ssize_t generic_file_splice_read(struct file *, struct inode *, size_t, unsigned int);
+extern ssize_t generic_file_splice_write(struct inode *, struct file *, size_t, unsigned int);
extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
extern ssize_t generic_file_readv(struct file *filp, const struct iovec *iov,
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 9383015..b209392 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -58,6 +58,19 @@
};
/**
+ * struct hrtimer_sleeper - simple sleeper structure
+ *
+ * @timer: embedded timer structure
+ * @task: task to wake up
+ *
+ * task is set to NULL, when the timer expires.
+ */
+struct hrtimer_sleeper {
+ struct hrtimer timer;
+ struct task_struct *task;
+};
+
+/**
* struct hrtimer_base - the timer base for a specific clock
*
* @index: clock type index for per_cpu support when moving a timer
@@ -127,6 +140,9 @@
const enum hrtimer_mode mode,
const clockid_t clockid);
+extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
+ struct task_struct *tsk);
+
/* Soft interrupt function to run the hrtimer queues: */
extern void hrtimer_run_queues(void);
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index 5357128..6d9c7e4 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -82,6 +82,13 @@
{
struct module *owner;
+ /* The low-level interface cannot start sending messages to
+ the upper layer until this function is called. This may
+ not be NULL, the lower layer must take the interface from
+ this call. */
+ int (*start_processing)(void *send_info,
+ ipmi_smi_t new_intf);
+
/* Called to enqueue an SMI message to be sent. This
operation is not allowed to fail. If an error occurs, it
should report back the error in a received message. It may
@@ -157,13 +164,16 @@
}
/* Add a low-level interface to the IPMI driver. Note that if the
- interface doesn't know its slave address, it should pass in zero. */
+ interface doesn't know its slave address, it should pass in zero.
+ The low-level interface should not deliver any messages to the
+ upper layer until the start_processing() function in the handlers
+ is called, and the lower layer must get the interface from that
+ call. */
int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
void *send_info,
struct ipmi_device_id *device_id,
struct device *dev,
- unsigned char slave_addr,
- ipmi_smi_t *intf);
+ unsigned char slave_addr);
/*
* Remove a low-level interface from the IPMI driver. This will
diff --git a/include/linux/leds.h b/include/linux/leds.h
new file mode 100644
index 0000000..4617e75
--- /dev/null
+++ b/include/linux/leds.h
@@ -0,0 +1,111 @@
+/*
+ * Driver model for leds and led triggers
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_LEDS_H_INCLUDED
+#define __LINUX_LEDS_H_INCLUDED
+
+struct device;
+struct class_device;
+/*
+ * LED Core
+ */
+
+enum led_brightness {
+ LED_OFF = 0,
+ LED_HALF = 127,
+ LED_FULL = 255,
+};
+
+struct led_classdev {
+ const char *name;
+ int brightness;
+ int flags;
+#define LED_SUSPENDED (1 << 0)
+
+ /* A function to set the brightness of the led */
+ void (*brightness_set)(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+
+ struct class_device *class_dev;
+ /* LED Device linked list */
+ struct list_head node;
+
+ /* Trigger data */
+ char *default_trigger;
+#ifdef CONFIG_LEDS_TRIGGERS
+ rwlock_t trigger_lock;
+ /* Protects the trigger data below */
+
+ struct led_trigger *trigger;
+ struct list_head trig_list;
+ void *trigger_data;
+#endif
+};
+
+extern int led_classdev_register(struct device *parent,
+ struct led_classdev *led_cdev);
+extern void led_classdev_unregister(struct led_classdev *led_cdev);
+extern void led_classdev_suspend(struct led_classdev *led_cdev);
+extern void led_classdev_resume(struct led_classdev *led_cdev);
+
+/*
+ * LED Triggers
+ */
+#ifdef CONFIG_LEDS_TRIGGERS
+
+#define TRIG_NAME_MAX 50
+
+struct led_trigger {
+ /* Trigger Properties */
+ const char *name;
+ void (*activate)(struct led_classdev *led_cdev);
+ void (*deactivate)(struct led_classdev *led_cdev);
+
+ /* LEDs under control by this trigger (for simple triggers) */
+ rwlock_t leddev_list_lock;
+ struct list_head led_cdevs;
+
+ /* Link to next registered trigger */
+ struct list_head next_trig;
+};
+
+/* Registration functions for complex triggers */
+extern int led_trigger_register(struct led_trigger *trigger);
+extern void led_trigger_unregister(struct led_trigger *trigger);
+
+/* Registration functions for simple triggers */
+#define DEFINE_LED_TRIGGER(x) static struct led_trigger *x;
+#define DEFINE_LED_TRIGGER_GLOBAL(x) struct led_trigger *x;
+extern void led_trigger_register_simple(const char *name,
+ struct led_trigger **trigger);
+extern void led_trigger_unregister_simple(struct led_trigger *trigger);
+extern void led_trigger_event(struct led_trigger *trigger,
+ enum led_brightness event);
+
+#else
+
+/* Triggers aren't active - null macros */
+#define DEFINE_LED_TRIGGER(x)
+#define DEFINE_LED_TRIGGER_GLOBAL(x)
+#define led_trigger_register_simple(x, y) do {} while(0)
+#define led_trigger_unregister_simple(x) do {} while(0)
+#define led_trigger_event(x, y) do {} while(0)
+
+#endif
+
+/* Trigger specific functions */
+#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
+extern void ledtrig_ide_activity(void);
+#else
+#define ledtrig_ide_activity() do {} while(0)
+#endif
+
+#endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0471922..0d61357 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -160,8 +160,10 @@
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
+ /* host set flags */
+ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
+
/* various lengths of time */
- ATA_TMOUT_EDD = 5 * HZ, /* heuristic */
ATA_TMOUT_PIO = 30 * HZ,
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
@@ -279,6 +281,7 @@
unsigned long irq;
unsigned int irq_flags;
unsigned long host_flags;
+ unsigned long host_set_flags;
void __iomem *mmio_base;
void *private_data;
};
@@ -291,6 +294,9 @@
unsigned int n_ports;
void *private_data;
const struct ata_port_operations *ops;
+ unsigned long flags;
+ int simplex_claimed; /* Keep seperate in case we
+ ever need to do this locked */
struct ata_port * ports[0];
};
@@ -420,6 +426,7 @@
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
+ unsigned long (*mode_filter) (const struct ata_port *, struct ata_device *, unsigned long);
void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -430,6 +437,7 @@
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
+ void (*set_mode) (struct ata_port *ap);
int (*probe_reset) (struct ata_port *ap, unsigned int *classes);
void (*post_set_mode) (struct ata_port *ap);
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index 7d09962..ff0a640 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -12,7 +12,7 @@
extern int migrate_page_remove_references(struct page *, struct page *, int);
extern int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed);
-int migrate_pages_to(struct list_head *pagelist,
+extern int migrate_pages_to(struct list_head *pagelist,
struct vm_area_struct *vma, int dest);
extern int fail_migrate_page(struct page *, struct page *);
@@ -26,6 +26,9 @@
static inline int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed) { return -ENOSYS; }
+static inline int migrate_pages_to(struct list_head *pagelist,
+ struct vm_area_struct *vma, int dest) { return 0; }
+
static inline int migrate_prep(void) { return -ENOSYS; }
/* Possible settings for the migrate_page() method in address_operations */
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index f46afec..72fc68c 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -10,7 +10,7 @@
#ifndef __MTD_TRANS_H__
#define __MTD_TRANS_H__
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
struct hd_geometry;
struct mtd_info;
@@ -22,7 +22,7 @@
struct mtd_blktrans_ops *tr;
struct list_head list;
struct mtd_info *mtd;
- struct semaphore sem;
+ struct mutex lock;
int devnum;
int blksize;
unsigned long size;
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 386a52c..9addd07 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -15,7 +15,7 @@
#define __MTD_DOC2000_H__
#include <linux/mtd/mtd.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#define DoC_Sig1 0
#define DoC_Sig2 1
@@ -187,7 +187,7 @@
int numchips;
struct Nand *chips;
struct mtd_info *nextdoc;
- struct semaphore lock;
+ struct mutex lock;
};
int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 0268125..d7eaa40 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -52,6 +52,11 @@
int INFTL_mount(struct INFTLrecord *s);
int INFTL_formatblock(struct INFTLrecord *s, int block);
+extern char inftlmountrev[];
+
+void INFTL_dumptables(struct INFTLrecord *s);
+void INFTL_dumpVUchains(struct INFTLrecord *s);
+
#endif /* __KERNEL__ */
#endif /* __MTD_INFTL_H__ */
diff --git a/include/linux/namei.h b/include/linux/namei.h
index e669801..58cb3d3 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -75,7 +75,6 @@
extern void release_open_intent(struct nameidata *);
extern struct dentry * lookup_one_len(const char *, struct dentry *, int);
-extern __deprecated_for_modules struct dentry * lookup_hash(struct nameidata *);
extern int follow_down(struct vfsmount **, struct dentry **);
extern int follow_up(struct vfsmount **, struct dentry **);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 950dc55..40ccf8c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -598,20 +598,7 @@
#define HAVE_NETIF_QUEUE
-static inline void __netif_schedule(struct net_device *dev)
-{
- if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) {
- unsigned long flags;
- struct softnet_data *sd;
-
- local_irq_save(flags);
- sd = &__get_cpu_var(softnet_data);
- dev->next_sched = sd->output_queue;
- sd->output_queue = dev;
- raise_softirq_irqoff(NET_TX_SOFTIRQ);
- local_irq_restore(flags);
- }
-}
+extern void __netif_schedule(struct net_device *dev);
static inline void netif_schedule(struct net_device *dev)
{
@@ -675,13 +662,7 @@
/* Use this variant in places where it could be invoked
* either from interrupt or non-interrupt context.
*/
-static inline void dev_kfree_skb_any(struct sk_buff *skb)
-{
- if (in_irq() || irqs_disabled())
- dev_kfree_skb_irq(skb);
- else
- dev_kfree_skb(skb);
-}
+extern void dev_kfree_skb_any(struct sk_buff *skb);
#define HAVE_NETIF_RX 1
extern int netif_rx(struct sk_buff *skb);
@@ -768,22 +749,9 @@
return test_bit(__LINK_STATE_PRESENT, &dev->state);
}
-static inline void netif_device_detach(struct net_device *dev)
-{
- if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
- netif_running(dev)) {
- netif_stop_queue(dev);
- }
-}
+extern void netif_device_detach(struct net_device *dev);
-static inline void netif_device_attach(struct net_device *dev)
-{
- if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
- netif_running(dev)) {
- netif_wake_queue(dev);
- __netdev_watchdog_up(dev);
- }
-}
+extern void netif_device_attach(struct net_device *dev);
/*
* Network interface message level settings
@@ -851,20 +819,7 @@
* already been called and returned 1.
*/
-static inline void __netif_rx_schedule(struct net_device *dev)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- dev_hold(dev);
- list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
- if (dev->quota < 0)
- dev->quota += dev->weight;
- else
- dev->quota = dev->weight;
- __raise_softirq_irqoff(NET_RX_SOFTIRQ);
- local_irq_restore(flags);
-}
+extern void __netif_rx_schedule(struct net_device *dev);
/* Try to reschedule poll. Called by irq handler. */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 839f0b3..9539efd 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -72,8 +72,8 @@
unsigned long index);
extern struct page * find_lock_page(struct address_space *mapping,
unsigned long index);
-extern struct page * find_trylock_page(struct address_space *mapping,
- unsigned long index);
+extern __deprecated_for_modules struct page * find_trylock_page(
+ struct address_space *mapping, unsigned long index);
extern struct page * find_or_create_page(struct address_space *mapping,
unsigned long index, gfp_t gfp_mask);
unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e2ab2ac..870fe38 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -773,6 +773,7 @@
#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803
#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b
#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200B 0x5809
#define PCI_VENDOR_ID_PROMISE 0x105a
#define PCI_DEVICE_ID_PROMISE_20265 0x0d30
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 5b9082c..29960b0 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -1,6 +1,8 @@
#ifndef _LINUX_PID_H
#define _LINUX_PID_H
+#include <linux/rcupdate.h>
+
enum pid_type
{
PIDTYPE_PID,
@@ -9,45 +11,109 @@
PIDTYPE_MAX
};
+/*
+ * What is struct pid?
+ *
+ * A struct pid is the kernel's internal notion of a process identifier.
+ * It refers to individual tasks, process groups, and sessions. While
+ * there are processes attached to it the struct pid lives in a hash
+ * table, so it and then the processes that it refers to can be found
+ * quickly from the numeric pid value. The attached processes may be
+ * quickly accessed by following pointers from struct pid.
+ *
+ * Storing pid_t values in the kernel and refering to them later has a
+ * problem. The process originally with that pid may have exited and the
+ * pid allocator wrapped, and another process could have come along
+ * and been assigned that pid.
+ *
+ * Referring to user space processes by holding a reference to struct
+ * task_struct has a problem. When the user space process exits
+ * the now useless task_struct is still kept. A task_struct plus a
+ * stack consumes around 10K of low kernel memory. More precisely
+ * this is THREAD_SIZE + sizeof(struct task_struct). By comparison
+ * a struct pid is about 64 bytes.
+ *
+ * Holding a reference to struct pid solves both of these problems.
+ * It is small so holding a reference does not consume a lot of
+ * resources, and since a new struct pid is allocated when the numeric
+ * pid value is reused we don't mistakenly refer to new processes.
+ */
+
struct pid
{
+ atomic_t count;
/* Try to keep pid_chain in the same cacheline as nr for find_pid */
int nr;
struct hlist_node pid_chain;
- /* list of pids with the same nr, only one of them is in the hash */
- struct list_head pid_list;
+ /* lists of tasks that use this pid */
+ struct hlist_head tasks[PIDTYPE_MAX];
+ struct rcu_head rcu;
};
-#define pid_task(elem, type) \
- list_entry(elem, struct task_struct, pids[type].pid_list)
+struct pid_link
+{
+ struct hlist_node node;
+ struct pid *pid;
+};
+
+static inline struct pid *get_pid(struct pid *pid)
+{
+ if (pid)
+ atomic_inc(&pid->count);
+ return pid;
+}
+
+extern void FASTCALL(put_pid(struct pid *pid));
+extern struct task_struct *FASTCALL(pid_task(struct pid *pid, enum pid_type));
+extern struct task_struct *FASTCALL(get_pid_task(struct pid *pid,
+ enum pid_type));
/*
* attach_pid() and detach_pid() must be called with the tasklist_lock
* write-held.
*/
-extern int FASTCALL(attach_pid(struct task_struct *task, enum pid_type type, int nr));
+extern int FASTCALL(attach_pid(struct task_struct *task,
+ enum pid_type type, int nr));
extern void FASTCALL(detach_pid(struct task_struct *task, enum pid_type));
/*
* look up a PID in the hash table. Must be called with the tasklist_lock
- * held.
+ * or rcu_read_lock() held.
*/
-extern struct pid *FASTCALL(find_pid(enum pid_type, int));
+extern struct pid *FASTCALL(find_pid(int nr));
-extern int alloc_pidmap(void);
-extern void FASTCALL(free_pidmap(int));
+/*
+ * Lookup a PID in the hash table, and return with it's count elevated.
+ */
+extern struct pid *find_get_pid(int nr);
+extern struct pid *alloc_pid(void);
+extern void FASTCALL(free_pid(struct pid *pid));
+
+#define pid_next(task, type) \
+ ((task)->pids[(type)].node.next)
+
+#define pid_next_task(task, type) \
+ hlist_entry(pid_next(task, type), struct task_struct, \
+ pids[(type)].node)
+
+
+/* We could use hlist_for_each_entry_rcu here but it takes more arguments
+ * than the do_each_task_pid/while_each_task_pid. So we roll our own
+ * to preserve the existing interface.
+ */
#define do_each_task_pid(who, type, task) \
if ((task = find_task_by_pid_type(type, who))) { \
- prefetch((task)->pids[type].pid_list.next); \
+ prefetch(pid_next(task, type)); \
do {
#define while_each_task_pid(who, type, task) \
- } while (task = pid_task((task)->pids[type].pid_list.next,\
- type), \
- prefetch((task)->pids[type].pid_list.next), \
- hlist_unhashed(&(task)->pids[type].pid_chain)); \
- } \
+ } while (pid_next(task, type) && ({ \
+ task = pid_next_task(task, type); \
+ rcu_dereference(task); \
+ prefetch(pid_next(task, type)); \
+ 1; }) ); \
+ }
#endif /* _LINUX_PID_H */
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index b12e59c..75c7f55 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -9,6 +9,7 @@
struct page *page;
unsigned int offset, len;
struct pipe_buf_operations *ops;
+ unsigned int stolen;
};
struct pipe_buf_operations {
@@ -16,6 +17,7 @@
void * (*map)(struct file *, struct pipe_inode_info *, struct pipe_buffer *);
void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *);
void (*release)(struct pipe_inode_info *, struct pipe_buffer *);
+ int (*steal)(struct pipe_inode_info *, struct pipe_buffer *);
};
struct pipe_inode_info {
@@ -53,4 +55,10 @@
struct inode* pipe_new(struct inode* inode);
void free_pipe_info(struct inode* inode);
+/*
+ * splice is tied to pipes as a transport (at least for now), so we'll just
+ * add the splice flags here.
+ */
+#define SPLICE_F_MOVE (0x01) /* move pages instead of copying */
+
#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d04186d..541f482 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -100,6 +100,7 @@
extern int nr_processes(void);
extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
+extern unsigned long nr_active(void);
extern unsigned long nr_iowait(void);
#include <linux/time.h>
@@ -483,6 +484,7 @@
#define MAX_PRIO (MAX_RT_PRIO + 40)
#define rt_task(p) (unlikely((p)->prio < MAX_RT_PRIO))
+#define batch_task(p) (unlikely((p)->policy == SCHED_BATCH))
/*
* Some day this will be a full-fledged user tracking system..
@@ -683,6 +685,13 @@
struct audit_context; /* See audit.c */
struct mempolicy;
+enum sleep_type {
+ SLEEP_NORMAL,
+ SLEEP_NONINTERACTIVE,
+ SLEEP_INTERACTIVE,
+ SLEEP_INTERRUPTED,
+};
+
struct task_struct {
volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */
struct thread_info *thread_info;
@@ -705,7 +714,7 @@
unsigned long sleep_avg;
unsigned long long timestamp, last_ran;
unsigned long long sched_time; /* sched_clock time spent running */
- int activated;
+ enum sleep_type sleep_type;
unsigned long policy;
cpumask_t cpus_allowed;
@@ -751,7 +760,7 @@
struct task_struct *group_leader; /* threadgroup leader */
/* PID/PID hash table linkage. */
- struct pid pids[PIDTYPE_MAX];
+ struct pid_link pids[PIDTYPE_MAX];
struct list_head thread_group;
struct completion *vfork_done; /* for vfork() */
@@ -890,18 +899,19 @@
*/
static inline int pid_alive(struct task_struct *p)
{
- return p->pids[PIDTYPE_PID].nr != 0;
+ return p->pids[PIDTYPE_PID].pid != NULL;
}
extern void free_task(struct task_struct *tsk);
#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
extern void __put_task_struct_cb(struct rcu_head *rhp);
+extern void __put_task_struct(struct task_struct *t);
static inline void put_task_struct(struct task_struct *t)
{
if (atomic_dec_and_test(&t->usage))
- call_rcu(&t->rcu, __put_task_struct_cb);
+ __put_task_struct(t);
}
/*
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 613b951..c4619a4 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -941,6 +941,25 @@
#define NET_IP_ALIGN 2
#endif
+/*
+ * The networking layer reserves some headroom in skb data (via
+ * dev_alloc_skb). This is used to avoid having to reallocate skb data when
+ * the header has to grow. In the default case, if the header has to grow
+ * 16 bytes or less we avoid the reallocation.
+ *
+ * Unfortunately this headroom changes the DMA alignment of the resulting
+ * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
+ * on some architectures. An architecture can override this value,
+ * perhaps setting it to a cacheline in size (since that will maintain
+ * cacheline alignment of the DMA). It must be a power of 2.
+ *
+ * Various parts of the networking layer expect at least 16 bytes of
+ * headroom, you should not reduce this.
+ */
+#ifndef NET_SKB_PAD
+#define NET_SKB_PAD 16
+#endif
+
extern int ___pskb_trim(struct sk_buff *skb, unsigned int len, int realloc);
static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
@@ -1030,9 +1049,9 @@
static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
gfp_t gfp_mask)
{
- struct sk_buff *skb = alloc_skb(length + 16, gfp_mask);
+ struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
if (likely(skb))
- skb_reserve(skb, 16);
+ skb_reserve(skb, NET_SKB_PAD);
return skb;
}
#else
@@ -1070,13 +1089,15 @@
*/
static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
{
- int delta = (headroom > 16 ? headroom : 16) - skb_headroom(skb);
+ int delta = (headroom > NET_SKB_PAD ? headroom : NET_SKB_PAD) -
+ skb_headroom(skb);
if (delta < 0)
delta = 0;
if (delta || skb_cloned(skb))
- return pskb_expand_head(skb, (delta + 15) & ~15, 0, GFP_ATOMIC);
+ return pskb_expand_head(skb, (delta + (NET_SKB_PAD-1)) &
+ ~(NET_SKB_PAD-1), 0, GFP_ATOMIC);
return 0;
}
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index e487e3b..5717147 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -569,5 +569,9 @@
asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
int flags, int mode);
asmlinkage long sys_unshare(unsigned long unshare_flags);
+asmlinkage long sys_splice(int fdin, int fdout, size_t len,
+ unsigned int flags);
+asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
+ int flags);
#endif
diff --git a/include/linux/timer.h b/include/linux/timer.h
index b5caabc..0a485be 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -6,7 +6,7 @@
#include <linux/spinlock.h>
#include <linux/stddef.h>
-struct timer_base_s;
+struct tvec_t_base_s;
struct timer_list {
struct list_head entry;
@@ -15,16 +15,16 @@
void (*function)(unsigned long);
unsigned long data;
- struct timer_base_s *base;
+ struct tvec_t_base_s *base;
};
-extern struct timer_base_s __init_timer_base;
+extern struct tvec_t_base_s boot_tvec_bases;
#define TIMER_INITIALIZER(_function, _expires, _data) { \
.function = (_function), \
.expires = (_expires), \
.data = (_data), \
- .base = &__init_timer_base, \
+ .base = &boot_tvec_bases, \
}
#define DEFINE_TIMER(_name, _function, _expires, _data) \
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
index 2c9e847..4756862 100644
--- a/include/linux/tiocl.h
+++ b/include/linux/tiocl.h
@@ -34,5 +34,6 @@
#define TIOCL_SCROLLCONSOLE 13 /* scroll console */
#define TIOCL_BLANKSCREEN 14 /* keep screen blank even if a key is pressed */
#define TIOCL_BLANKEDSCREEN 15 /* return which vt was blanked */
+#define TIOCL_GETKMSGREDIRECT 17 /* get the vt the kernel messages are restricted to */
#endif /* _LINUX_TIOCL_H */
diff --git a/include/net/sock.h b/include/net/sock.h
index 2aa73c0..af2b054 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -938,28 +938,7 @@
sk_free(sk);
}
-static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb)
-{
- int rc = NET_RX_SUCCESS;
-
- if (sk_filter(sk, skb, 0))
- goto discard_and_relse;
-
- skb->dev = NULL;
-
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- rc = sk->sk_backlog_rcv(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
-out:
- sock_put(sk);
- return rc;
-discard_and_relse:
- kfree_skb(skb);
- goto out;
-}
+extern int sk_receive_skb(struct sock *sk, struct sk_buff *skb);
/* Detach socket from process context.
* Announce socket dead, detach it from wait queue and inode.
@@ -1044,33 +1023,9 @@
write_unlock(&sk->sk_dst_lock);
}
-static inline struct dst_entry *
-__sk_dst_check(struct sock *sk, u32 cookie)
-{
- struct dst_entry *dst = sk->sk_dst_cache;
+extern struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie);
- if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
- sk->sk_dst_cache = NULL;
- dst_release(dst);
- return NULL;
- }
-
- return dst;
-}
-
-static inline struct dst_entry *
-sk_dst_check(struct sock *sk, u32 cookie)
-{
- struct dst_entry *dst = sk_dst_get(sk);
-
- if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
- sk_dst_reset(sk);
- dst_release(dst);
- return NULL;
- }
-
- return dst;
-}
+extern struct dst_entry *sk_dst_check(struct sock *sk, u32 cookie);
static inline void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
{
@@ -1140,45 +1095,7 @@
extern void sk_stop_timer(struct sock *sk, struct timer_list* timer);
-static inline int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
-{
- int err = 0;
- int skb_len;
-
- /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
- number of warnings when compiling with -W --ANK
- */
- if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
- (unsigned)sk->sk_rcvbuf) {
- err = -ENOMEM;
- goto out;
- }
-
- /* It would be deadlock, if sock_queue_rcv_skb is used
- with socket lock! We assume that users of this
- function are lock free.
- */
- err = sk_filter(sk, skb, 1);
- if (err)
- goto out;
-
- skb->dev = NULL;
- skb_set_owner_r(skb, sk);
-
- /* Cache the SKB length before we tack it onto the receive
- * queue. Once it is added it no longer belongs to us and
- * may be freed by other threads of control pulling packets
- * from the queue.
- */
- skb_len = skb->len;
-
- skb_queue_tail(&sk->sk_receive_queue, skb);
-
- if (!sock_flag(sk, SOCK_DEAD))
- sk->sk_data_ready(sk, skb_len);
-out:
- return err;
-}
+extern int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
static inline int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb)
{
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 9418f4d..3c989db 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -405,9 +405,6 @@
extern void tcp_unhash(struct sock *sk);
-extern int tcp_v4_hash_connecting(struct sock *sk);
-
-
/* From syncookies.c */
extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
struct ip_options *opt);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 61b7504..e100291 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -864,13 +864,19 @@
/* XFRM tunnel handlers. */
struct xfrm_tunnel {
int (*handler)(struct sk_buff *skb);
- void (*err_handler)(struct sk_buff *skb, __u32 info);
+ int (*err_handler)(struct sk_buff *skb, __u32 info);
+
+ struct xfrm_tunnel *next;
+ int priority;
};
struct xfrm6_tunnel {
- int (*handler)(struct sk_buff **pskb);
- void (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __u32 info);
+ int (*handler)(struct sk_buff *skb);
+ int (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
+ int type, int code, int offset, __u32 info);
+
+ struct xfrm6_tunnel *next;
+ int priority;
};
extern void xfrm_init(void);
@@ -906,7 +912,7 @@
extern int xfrm4_output(struct sk_buff *skb);
extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler);
extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler);
-extern int xfrm6_rcv_spi(struct sk_buff **pskb, u32 spi);
+extern int xfrm6_rcv_spi(struct sk_buff *skb, u32 spi);
extern int xfrm6_rcv(struct sk_buff **pskb);
extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler);
extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler);
diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
index 51ab8ed..5ff7755 100644
--- a/include/rdma/ib_mad.h
+++ b/include/rdma/ib_mad.h
@@ -3,7 +3,7 @@
* Copyright (c) 2004 Infinicon Corporation. All rights reserved.
* Copyright (c) 2004 Intel Corporation. All rights reserved.
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
- * Copyright (c) 2004 Voltaire Corporation. All rights reserved.
+ * Copyright (c) 2004-2006 Voltaire Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -55,6 +55,10 @@
#define IB_MGMT_CLASS_DEVICE_MGMT 0x06
#define IB_MGMT_CLASS_CM 0x07
#define IB_MGMT_CLASS_SNMP 0x08
+#define IB_MGMT_CLASS_DEVICE_ADM 0x10
+#define IB_MGMT_CLASS_BOOT_MGMT 0x11
+#define IB_MGMT_CLASS_BIS 0x12
+#define IB_MGMT_CLASS_CONG_MGMT 0x21
#define IB_MGMT_CLASS_VENDOR_RANGE2_START 0x30
#define IB_MGMT_CLASS_VENDOR_RANGE2_END 0x4F
@@ -117,6 +121,8 @@
IB_MGMT_VENDOR_DATA = 216,
IB_MGMT_SA_HDR = 56,
IB_MGMT_SA_DATA = 200,
+ IB_MGMT_DEVICE_HDR = 64,
+ IB_MGMT_DEVICE_DATA = 192,
};
struct ib_mad_hdr {
@@ -603,6 +609,25 @@
gfp_t gfp_mask);
/**
+ * ib_is_mad_class_rmpp - returns whether given management class
+ * supports RMPP.
+ * @mgmt_class: management class
+ *
+ * This routine returns whether the management class supports RMPP.
+ */
+int ib_is_mad_class_rmpp(u8 mgmt_class);
+
+/**
+ * ib_get_mad_data_offset - returns the data offset for a given
+ * management class.
+ * @mgmt_class: management class
+ *
+ * This routine returns the data offset in the MAD for the management
+ * class requested.
+ */
+int ib_get_mad_data_offset(u8 mgmt_class);
+
+/**
* ib_get_rmpp_segment - returns the data buffer for a given RMPP segment.
* @send_buf: Previously allocated send data buffer.
* @seg_num: number of segment to return
diff --git a/kernel/acct.c b/kernel/acct.c
index 065d8b4..b327f4d 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -449,8 +449,8 @@
/* calculate run_time in nsec*/
do_posix_clock_monotonic_gettime(&uptime);
run_time = (u64)uptime.tv_sec*NSEC_PER_SEC + uptime.tv_nsec;
- run_time -= (u64)current->start_time.tv_sec*NSEC_PER_SEC
- + current->start_time.tv_nsec;
+ run_time -= (u64)current->group_leader->start_time.tv_sec * NSEC_PER_SEC
+ + current->group_leader->start_time.tv_nsec;
/* convert nsec -> AHZ */
elapsed = nsec_to_AHZ(run_time);
#if ACCT_VERSION==3
@@ -469,10 +469,10 @@
#endif
do_div(elapsed, AHZ);
ac.ac_btime = xtime.tv_sec - elapsed;
- jiffies = cputime_to_jiffies(cputime_add(current->group_leader->utime,
+ jiffies = cputime_to_jiffies(cputime_add(current->utime,
current->signal->utime));
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(jiffies));
- jiffies = cputime_to_jiffies(cputime_add(current->group_leader->stime,
+ jiffies = cputime_to_jiffies(cputime_add(current->stime,
current->signal->stime));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(jiffies));
/* we really need to bite the bullet and change layout */
@@ -522,9 +522,9 @@
ac.ac_io = encode_comp_t(0 /* current->io_usage */); /* %% */
ac.ac_rw = encode_comp_t(ac.ac_io / 1024);
ac.ac_minflt = encode_comp_t(current->signal->min_flt +
- current->group_leader->min_flt);
+ current->min_flt);
ac.ac_majflt = encode_comp_t(current->signal->maj_flt +
- current->group_leader->maj_flt);
+ current->maj_flt);
ac.ac_swaps = encode_comp_t(0);
ac.ac_exitcode = exitcode;
diff --git a/kernel/audit.c b/kernel/audit.c
index 04fe2e3..c8ccbd0 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -578,7 +578,7 @@
audit_initialized ? "" : " (after initialization)");
if (audit_initialized)
audit_enabled = audit_default;
- return 0;
+ return 1;
}
__setup("audit=", audit_enable);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 18aea1b..72248d1 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -616,12 +616,10 @@
* current->cpuset if a task has its memory placement changed.
* Do not call this routine if in_interrupt().
*
- * Call without callback_mutex or task_lock() held. May be called
- * with or without manage_mutex held. Doesn't need task_lock to guard
- * against another task changing a non-NULL cpuset pointer to NULL,
- * as that is only done by a task on itself, and if the current task
- * is here, it is not simultaneously in the exit code NULL'ing its
- * cpuset pointer. This routine also might acquire callback_mutex and
+ * Call without callback_mutex or task_lock() held. May be
+ * called with or without manage_mutex held. Thanks in part to
+ * 'the_top_cpuset_hack', the tasks cpuset pointer will never
+ * be NULL. This routine also might acquire callback_mutex and
* current->mm->mmap_sem during call.
*
* Reading current->cpuset->mems_generation doesn't need task_lock
@@ -836,6 +834,55 @@
}
/*
+ * cpuset_migrate_mm
+ *
+ * Migrate memory region from one set of nodes to another.
+ *
+ * Temporarilly set tasks mems_allowed to target nodes of migration,
+ * so that the migration code can allocate pages on these nodes.
+ *
+ * Call holding manage_mutex, so our current->cpuset won't change
+ * during this call, as manage_mutex holds off any attach_task()
+ * calls. Therefore we don't need to take task_lock around the
+ * call to guarantee_online_mems(), as we know no one is changing
+ * our tasks cpuset.
+ *
+ * Hold callback_mutex around the two modifications of our tasks
+ * mems_allowed to synchronize with cpuset_mems_allowed().
+ *
+ * While the mm_struct we are migrating is typically from some
+ * other task, the task_struct mems_allowed that we are hacking
+ * is for our current task, which must allocate new pages for that
+ * migrating memory region.
+ *
+ * We call cpuset_update_task_memory_state() before hacking
+ * our tasks mems_allowed, so that we are assured of being in
+ * sync with our tasks cpuset, and in particular, callbacks to
+ * cpuset_update_task_memory_state() from nested page allocations
+ * won't see any mismatch of our cpuset and task mems_generation
+ * values, so won't overwrite our hacked tasks mems_allowed
+ * nodemask.
+ */
+
+static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
+ const nodemask_t *to)
+{
+ struct task_struct *tsk = current;
+
+ cpuset_update_task_memory_state();
+
+ mutex_lock(&callback_mutex);
+ tsk->mems_allowed = *to;
+ mutex_unlock(&callback_mutex);
+
+ do_migrate_pages(mm, from, to, MPOL_MF_MOVE_ALL);
+
+ mutex_lock(&callback_mutex);
+ guarantee_online_mems(tsk->cpuset, &tsk->mems_allowed);
+ mutex_unlock(&callback_mutex);
+}
+
+/*
* Handle user request to change the 'mems' memory placement
* of a cpuset. Needs to validate the request, update the
* cpusets mems_allowed and mems_generation, and for each
@@ -947,10 +994,8 @@
struct mm_struct *mm = mmarray[i];
mpol_rebind_mm(mm, &cs->mems_allowed);
- if (migrate) {
- do_migrate_pages(mm, &oldmem, &cs->mems_allowed,
- MPOL_MF_MOVE_ALL);
- }
+ if (migrate)
+ cpuset_migrate_mm(mm, &oldmem, &cs->mems_allowed);
mmput(mm);
}
@@ -1185,11 +1230,11 @@
mm = get_task_mm(tsk);
if (mm) {
mpol_rebind_mm(mm, &to);
+ if (is_memory_migrate(cs))
+ cpuset_migrate_mm(mm, &from, &to);
mmput(mm);
}
- if (is_memory_migrate(cs))
- do_migrate_pages(tsk->mm, &from, &to, MPOL_MF_MOVE_ALL);
put_task_struct(tsk);
synchronize_rcu();
if (atomic_dec_and_test(&oldcs->count))
diff --git a/kernel/exit.c b/kernel/exit.c
index bc0ec67..6c2eeb8 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -127,6 +127,11 @@
}
}
+static void delayed_put_task_struct(struct rcu_head *rhp)
+{
+ put_task_struct(container_of(rhp, struct task_struct, rcu));
+}
+
void release_task(struct task_struct * p)
{
int zap_leader;
@@ -168,7 +173,7 @@
spin_unlock(&p->proc_lock);
proc_pid_flush(proc_dentry);
release_thread(p);
- put_task_struct(p);
+ call_rcu(&p->rcu, delayed_put_task_struct);
p = leader;
if (unlikely(zap_leader))
diff --git a/kernel/fork.c b/kernel/fork.c
index b3f7a1b..3384eb8 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -108,10 +108,8 @@
}
EXPORT_SYMBOL(free_task);
-void __put_task_struct_cb(struct rcu_head *rhp)
+void __put_task_struct(struct task_struct *tsk)
{
- struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
-
WARN_ON(!(tsk->exit_state & (EXIT_DEAD | EXIT_ZOMBIE)));
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
@@ -126,6 +124,12 @@
free_task(tsk);
}
+void __put_task_struct_cb(struct rcu_head *rhp)
+{
+ struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
+ __put_task_struct(tsk);
+}
+
void __init fork_init(unsigned long mempages)
{
#ifndef __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
@@ -721,7 +725,7 @@
free_fdset (new_fdt->open_fds, new_fdt->max_fdset);
free_fd_array(new_fdt->fd, new_fdt->max_fds);
kmem_cache_free(files_cachep, newf);
- goto out;
+ return NULL;
}
static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
@@ -1311,17 +1315,19 @@
{
struct task_struct *p;
int trace = 0;
- long pid = alloc_pidmap();
+ struct pid *pid = alloc_pid();
+ long nr;
- if (pid < 0)
+ if (!pid)
return -EAGAIN;
+ nr = pid->nr;
if (unlikely(current->ptrace)) {
trace = fork_traceflag (clone_flags);
if (trace)
clone_flags |= CLONE_PTRACE;
}
- p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, pid);
+ p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, nr);
/*
* Do this prior waking up the new thread - the thread pointer
* might get invalid after that point, if the thread exits quickly.
@@ -1348,7 +1354,7 @@
p->state = TASK_STOPPED;
if (unlikely (trace)) {
- current->ptrace_message = pid;
+ current->ptrace_message = nr;
ptrace_notify ((trace << 8) | SIGTRAP);
}
@@ -1358,10 +1364,10 @@
ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP);
}
} else {
- free_pidmap(pid);
- pid = PTR_ERR(p);
+ free_pid(pid);
+ nr = PTR_ERR(p);
}
- return pid;
+ return nr;
}
#ifndef ARCH_MIN_MMSTRUCT_ALIGN
diff --git a/kernel/futex.c b/kernel/futex.c
index 9c9b2b6..5699c51 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1039,9 +1039,11 @@
unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
int val2 = 0;
- if ((op == FUTEX_WAIT) && utime) {
+ if (utime && (op == FUTEX_WAIT)) {
if (copy_from_user(&t, utime, sizeof(t)) != 0)
return -EFAULT;
+ if (!timespec_valid(&t))
+ return -EINVAL;
timeout = timespec_to_jiffies(&t) + 1;
}
/*
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 54274fc..1ab6a0e 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -129,9 +129,11 @@
unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
int val2 = 0;
- if ((op == FUTEX_WAIT) && utime) {
+ if (utime && (op == FUTEX_WAIT)) {
if (get_compat_timespec(&t, utime))
return -EFAULT;
+ if (!timespec_valid(&t))
+ return -EINVAL;
timeout = timespec_to_jiffies(&t) + 1;
}
if (op >= FUTEX_REQUEUE)
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 0237a55..f181ff4 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -606,6 +606,9 @@
{
struct rb_node *node;
+ if (!base->first)
+ return;
+
if (base->get_softirq_time)
base->softirq_time = base->get_softirq_time();
@@ -655,29 +658,28 @@
/*
* Sleep related functions:
*/
-
-struct sleep_hrtimer {
- struct hrtimer timer;
- struct task_struct *task;
- int expired;
-};
-
-static int nanosleep_wakeup(struct hrtimer *timer)
+static int hrtimer_wakeup(struct hrtimer *timer)
{
- struct sleep_hrtimer *t =
- container_of(timer, struct sleep_hrtimer, timer);
+ struct hrtimer_sleeper *t =
+ container_of(timer, struct hrtimer_sleeper, timer);
+ struct task_struct *task = t->task;
- t->expired = 1;
- wake_up_process(t->task);
+ t->task = NULL;
+ if (task)
+ wake_up_process(task);
return HRTIMER_NORESTART;
}
-static int __sched do_nanosleep(struct sleep_hrtimer *t, enum hrtimer_mode mode)
+void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, task_t *task)
{
- t->timer.function = nanosleep_wakeup;
- t->task = current;
- t->expired = 0;
+ sl->timer.function = hrtimer_wakeup;
+ sl->task = task;
+}
+
+static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
+{
+ hrtimer_init_sleeper(t, current);
do {
set_current_state(TASK_INTERRUPTIBLE);
@@ -685,18 +687,17 @@
schedule();
- if (unlikely(!t->expired)) {
- hrtimer_cancel(&t->timer);
- mode = HRTIMER_ABS;
- }
- } while (!t->expired && !signal_pending(current));
+ hrtimer_cancel(&t->timer);
+ mode = HRTIMER_ABS;
- return t->expired;
+ } while (t->task && !signal_pending(current));
+
+ return t->task == NULL;
}
static long __sched nanosleep_restart(struct restart_block *restart)
{
- struct sleep_hrtimer t;
+ struct hrtimer_sleeper t;
struct timespec __user *rmtp;
struct timespec tu;
ktime_t time;
@@ -729,7 +730,7 @@
const enum hrtimer_mode mode, const clockid_t clockid)
{
struct restart_block *restart;
- struct sleep_hrtimer t;
+ struct hrtimer_sleeper t;
struct timespec tu;
ktime_t rem;
diff --git a/kernel/module.c b/kernel/module.c
index bd088a7..d24deb0 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1254,6 +1254,7 @@
|| strcmp(license, "GPL v2") == 0
|| strcmp(license, "GPL and additional rights") == 0
|| strcmp(license, "Dual BSD/GPL") == 0
+ || strcmp(license, "Dual MIT/GPL") == 0
|| strcmp(license, "Dual MPL/GPL") == 0);
}
diff --git a/kernel/pid.c b/kernel/pid.c
index a9f2dfd..eeb836b 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -28,8 +28,9 @@
#include <linux/hash.h>
#define pid_hashfn(nr) hash_long((unsigned long)nr, pidhash_shift)
-static struct hlist_head *pid_hash[PIDTYPE_MAX];
+static struct hlist_head *pid_hash;
static int pidhash_shift;
+static kmem_cache_t *pid_cachep;
int pid_max = PID_MAX_DEFAULT;
int last_pid;
@@ -60,9 +61,22 @@
static pidmap_t pidmap_array[PIDMAP_ENTRIES] =
{ [ 0 ... PIDMAP_ENTRIES-1 ] = { ATOMIC_INIT(BITS_PER_PAGE), NULL } };
+/*
+ * Note: disable interrupts while the pidmap_lock is held as an
+ * interrupt might come in and do read_lock(&tasklist_lock).
+ *
+ * If we don't disable interrupts there is a nasty deadlock between
+ * detach_pid()->free_pid() and another cpu that does
+ * spin_lock(&pidmap_lock) followed by an interrupt routine that does
+ * read_lock(&tasklist_lock);
+ *
+ * After we clean up the tasklist_lock and know there are no
+ * irq handlers that take it we can leave the interrupts enabled.
+ * For now it is easier to be safe than to prove it can't happen.
+ */
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
-fastcall void free_pidmap(int pid)
+static fastcall void free_pidmap(int pid)
{
pidmap_t *map = pidmap_array + pid / BITS_PER_PAGE;
int offset = pid & BITS_PER_PAGE_MASK;
@@ -71,7 +85,7 @@
atomic_inc(&map->nr_free);
}
-int alloc_pidmap(void)
+static int alloc_pidmap(void)
{
int i, offset, max_scan, pid, last = last_pid;
pidmap_t *map;
@@ -89,12 +103,12 @@
* Free the page if someone raced with us
* installing it:
*/
- spin_lock(&pidmap_lock);
+ spin_lock_irq(&pidmap_lock);
if (map->page)
free_page(page);
else
map->page = (void *)page;
- spin_unlock(&pidmap_lock);
+ spin_unlock_irq(&pidmap_lock);
if (unlikely(!map->page))
break;
}
@@ -131,13 +145,73 @@
return -1;
}
-struct pid * fastcall find_pid(enum pid_type type, int nr)
+fastcall void put_pid(struct pid *pid)
+{
+ if (!pid)
+ return;
+ if ((atomic_read(&pid->count) == 1) ||
+ atomic_dec_and_test(&pid->count))
+ kmem_cache_free(pid_cachep, pid);
+}
+
+static void delayed_put_pid(struct rcu_head *rhp)
+{
+ struct pid *pid = container_of(rhp, struct pid, rcu);
+ put_pid(pid);
+}
+
+fastcall void free_pid(struct pid *pid)
+{
+ /* We can be called with write_lock_irq(&tasklist_lock) held */
+ unsigned long flags;
+
+ spin_lock_irqsave(&pidmap_lock, flags);
+ hlist_del_rcu(&pid->pid_chain);
+ spin_unlock_irqrestore(&pidmap_lock, flags);
+
+ free_pidmap(pid->nr);
+ call_rcu(&pid->rcu, delayed_put_pid);
+}
+
+struct pid *alloc_pid(void)
+{
+ struct pid *pid;
+ enum pid_type type;
+ int nr = -1;
+
+ pid = kmem_cache_alloc(pid_cachep, GFP_KERNEL);
+ if (!pid)
+ goto out;
+
+ nr = alloc_pidmap();
+ if (nr < 0)
+ goto out_free;
+
+ atomic_set(&pid->count, 1);
+ pid->nr = nr;
+ for (type = 0; type < PIDTYPE_MAX; ++type)
+ INIT_HLIST_HEAD(&pid->tasks[type]);
+
+ spin_lock_irq(&pidmap_lock);
+ hlist_add_head_rcu(&pid->pid_chain, &pid_hash[pid_hashfn(pid->nr)]);
+ spin_unlock_irq(&pidmap_lock);
+
+out:
+ return pid;
+
+out_free:
+ kmem_cache_free(pid_cachep, pid);
+ pid = NULL;
+ goto out;
+}
+
+struct pid * fastcall find_pid(int nr)
{
struct hlist_node *elem;
struct pid *pid;
hlist_for_each_entry_rcu(pid, elem,
- &pid_hash[type][pid_hashfn(nr)], pid_chain) {
+ &pid_hash[pid_hashfn(nr)], pid_chain) {
if (pid->nr == nr)
return pid;
}
@@ -146,77 +220,82 @@
int fastcall attach_pid(task_t *task, enum pid_type type, int nr)
{
- struct pid *pid, *task_pid;
+ struct pid_link *link;
+ struct pid *pid;
- task_pid = &task->pids[type];
- pid = find_pid(type, nr);
- task_pid->nr = nr;
- if (pid == NULL) {
- INIT_LIST_HEAD(&task_pid->pid_list);
- hlist_add_head_rcu(&task_pid->pid_chain,
- &pid_hash[type][pid_hashfn(nr)]);
- } else {
- INIT_HLIST_NODE(&task_pid->pid_chain);
- list_add_tail_rcu(&task_pid->pid_list, &pid->pid_list);
- }
+ WARN_ON(!task->pid); /* to be removed soon */
+ WARN_ON(!nr); /* to be removed soon */
+
+ link = &task->pids[type];
+ link->pid = pid = find_pid(nr);
+ hlist_add_head_rcu(&link->node, &pid->tasks[type]);
return 0;
}
-static fastcall int __detach_pid(task_t *task, enum pid_type type)
-{
- struct pid *pid, *pid_next;
- int nr = 0;
-
- pid = &task->pids[type];
- if (!hlist_unhashed(&pid->pid_chain)) {
-
- if (list_empty(&pid->pid_list)) {
- nr = pid->nr;
- hlist_del_rcu(&pid->pid_chain);
- } else {
- pid_next = list_entry(pid->pid_list.next,
- struct pid, pid_list);
- /* insert next pid from pid_list to hash */
- hlist_replace_rcu(&pid->pid_chain,
- &pid_next->pid_chain);
- }
- }
-
- list_del_rcu(&pid->pid_list);
- pid->nr = 0;
-
- return nr;
-}
-
void fastcall detach_pid(task_t *task, enum pid_type type)
{
- int tmp, nr;
+ struct pid_link *link;
+ struct pid *pid;
+ int tmp;
- nr = __detach_pid(task, type);
- if (!nr)
- return;
+ link = &task->pids[type];
+ pid = link->pid;
+
+ hlist_del_rcu(&link->node);
+ link->pid = NULL;
for (tmp = PIDTYPE_MAX; --tmp >= 0; )
- if (tmp != type && find_pid(tmp, nr))
+ if (!hlist_empty(&pid->tasks[tmp]))
return;
- free_pidmap(nr);
+ free_pid(pid);
}
+struct task_struct * fastcall pid_task(struct pid *pid, enum pid_type type)
+{
+ struct task_struct *result = NULL;
+ if (pid) {
+ struct hlist_node *first;
+ first = rcu_dereference(pid->tasks[type].first);
+ if (first)
+ result = hlist_entry(first, struct task_struct, pids[(type)].node);
+ }
+ return result;
+}
+
+/*
+ * Must be called under rcu_read_lock() or with tasklist_lock read-held.
+ */
task_t *find_task_by_pid_type(int type, int nr)
{
- struct pid *pid;
-
- pid = find_pid(type, nr);
- if (!pid)
- return NULL;
-
- return pid_task(&pid->pid_list, type);
+ return pid_task(find_pid(nr), type);
}
EXPORT_SYMBOL(find_task_by_pid_type);
+struct task_struct *fastcall get_pid_task(struct pid *pid, enum pid_type type)
+{
+ struct task_struct *result;
+ rcu_read_lock();
+ result = pid_task(pid, type);
+ if (result)
+ get_task_struct(result);
+ rcu_read_unlock();
+ return result;
+}
+
+struct pid *find_get_pid(pid_t nr)
+{
+ struct pid *pid;
+
+ rcu_read_lock();
+ pid = get_pid(find_pid(nr));
+ rcu_read_unlock();
+
+ return pid;
+}
+
/*
* The pid hash table is scaled according to the amount of memory in the
* machine. From a minimum of 16 slots up to 4096 slots at one gigabyte or
@@ -224,7 +303,7 @@
*/
void __init pidhash_init(void)
{
- int i, j, pidhash_size;
+ int i, pidhash_size;
unsigned long megabytes = nr_kernel_pages >> (20 - PAGE_SHIFT);
pidhash_shift = max(4, fls(megabytes * 4));
@@ -233,16 +312,13 @@
printk("PID hash table entries: %d (order: %d, %Zd bytes)\n",
pidhash_size, pidhash_shift,
- PIDTYPE_MAX * pidhash_size * sizeof(struct hlist_head));
+ pidhash_size * sizeof(struct hlist_head));
- for (i = 0; i < PIDTYPE_MAX; i++) {
- pid_hash[i] = alloc_bootmem(pidhash_size *
- sizeof(*(pid_hash[i])));
- if (!pid_hash[i])
- panic("Could not alloc pidhash!\n");
- for (j = 0; j < pidhash_size; j++)
- INIT_HLIST_HEAD(&pid_hash[i][j]);
- }
+ pid_hash = alloc_bootmem(pidhash_size * sizeof(*(pid_hash)));
+ if (!pid_hash)
+ panic("Could not alloc pidhash!\n");
+ for (i = 0; i < pidhash_size; i++)
+ INIT_HLIST_HEAD(&pid_hash[i]);
}
void __init pidmap_init(void)
@@ -251,4 +327,8 @@
/* Reserve PID 0. We never call free_pidmap(0) */
set_bit(0, pidmap_array->page);
atomic_dec(&pidmap_array->nr_free);
+
+ pid_cachep = kmem_cache_create("pid", sizeof(struct pid),
+ __alignof__(struct pid),
+ SLAB_PANIC, NULL, NULL);
}
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 8ac7c35f..b2a5f67 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -26,8 +26,7 @@
(p->flags & PF_NOFREEZE) ||
(p->exit_state == EXIT_ZOMBIE) ||
(p->exit_state == EXIT_DEAD) ||
- (p->state == TASK_STOPPED) ||
- (p->state == TASK_TRACED))
+ (p->state == TASK_STOPPED))
return 0;
return 1;
}
diff --git a/kernel/sched.c b/kernel/sched.c
index a9ecac3..dd153d6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -667,9 +667,13 @@
/*
* __activate_task - move a task to the runqueue.
*/
-static inline void __activate_task(task_t *p, runqueue_t *rq)
+static void __activate_task(task_t *p, runqueue_t *rq)
{
- enqueue_task(p, rq->active);
+ prio_array_t *target = rq->active;
+
+ if (batch_task(p))
+ target = rq->expired;
+ enqueue_task(p, target);
rq->nr_running++;
}
@@ -688,7 +692,7 @@
unsigned long long __sleep_time = now - p->timestamp;
unsigned long sleep_time;
- if (unlikely(p->policy == SCHED_BATCH))
+ if (batch_task(p))
sleep_time = 0;
else {
if (__sleep_time > NS_MAX_SLEEP_AVG)
@@ -700,21 +704,25 @@
if (likely(sleep_time > 0)) {
/*
* User tasks that sleep a long time are categorised as
- * idle and will get just interactive status to stay active &
- * prevent them suddenly becoming cpu hogs and starving
- * other processes.
+ * idle. They will only have their sleep_avg increased to a
+ * level that makes them just interactive priority to stay
+ * active yet prevent them suddenly becoming cpu hogs and
+ * starving other processes.
*/
- if (p->mm && p->activated != -1 &&
- sleep_time > INTERACTIVE_SLEEP(p)) {
- p->sleep_avg = JIFFIES_TO_NS(MAX_SLEEP_AVG -
- DEF_TIMESLICE);
+ if (p->mm && sleep_time > INTERACTIVE_SLEEP(p)) {
+ unsigned long ceiling;
+
+ ceiling = JIFFIES_TO_NS(MAX_SLEEP_AVG -
+ DEF_TIMESLICE);
+ if (p->sleep_avg < ceiling)
+ p->sleep_avg = ceiling;
} else {
/*
* Tasks waking from uninterruptible sleep are
* limited in their sleep_avg rise as they
* are likely to be waiting on I/O
*/
- if (p->activated == -1 && p->mm) {
+ if (p->sleep_type == SLEEP_NONINTERACTIVE && p->mm) {
if (p->sleep_avg >= INTERACTIVE_SLEEP(p))
sleep_time = 0;
else if (p->sleep_avg + sleep_time >=
@@ -769,7 +777,7 @@
* This checks to make sure it's not an uninterruptible task
* that is now waking up.
*/
- if (!p->activated) {
+ if (p->sleep_type == SLEEP_NORMAL) {
/*
* Tasks which were woken up by interrupts (ie. hw events)
* are most likely of interactive nature. So we give them
@@ -778,13 +786,13 @@
* on a CPU, first time around:
*/
if (in_interrupt())
- p->activated = 2;
+ p->sleep_type = SLEEP_INTERRUPTED;
else {
/*
* Normal first-time wakeups get a credit too for
* on-runqueue time, but it will be weighted down:
*/
- p->activated = 1;
+ p->sleep_type = SLEEP_INTERACTIVE;
}
}
p->timestamp = now;
@@ -1272,19 +1280,19 @@
* Tasks on involuntary sleep don't earn
* sleep_avg beyond just interactive state.
*/
- p->activated = -1;
- }
+ p->sleep_type = SLEEP_NONINTERACTIVE;
+ } else
/*
* Tasks that have marked their sleep as noninteractive get
- * woken up without updating their sleep average. (i.e. their
- * sleep is handled in a priority-neutral manner, no priority
- * boost and no penalty.)
+ * woken up with their sleep average not weighted in an
+ * interactive way.
*/
- if (old_state & TASK_NONINTERACTIVE)
- __activate_task(p, rq);
- else
- activate_task(p, rq, cpu == this_cpu);
+ if (old_state & TASK_NONINTERACTIVE)
+ p->sleep_type = SLEEP_NONINTERACTIVE;
+
+
+ activate_task(p, rq, cpu == this_cpu);
/*
* Sync wakeups (i.e. those types of wakeups where the waker
* has indicated that it will leave the CPU in short order)
@@ -1658,6 +1666,21 @@
return sum;
}
+unsigned long nr_active(void)
+{
+ unsigned long i, running = 0, uninterruptible = 0;
+
+ for_each_online_cpu(i) {
+ running += cpu_rq(i)->nr_running;
+ uninterruptible += cpu_rq(i)->nr_uninterruptible;
+ }
+
+ if (unlikely((long)uninterruptible < 0))
+ uninterruptible = 0;
+
+ return running + uninterruptible;
+}
+
#ifdef CONFIG_SMP
/*
@@ -2860,6 +2883,12 @@
#endif
+static inline int interactive_sleep(enum sleep_type sleep_type)
+{
+ return (sleep_type == SLEEP_INTERACTIVE ||
+ sleep_type == SLEEP_INTERRUPTED);
+}
+
/*
* schedule() is the main scheduler function.
*/
@@ -2983,12 +3012,12 @@
queue = array->queue + idx;
next = list_entry(queue->next, task_t, run_list);
- if (!rt_task(next) && next->activated > 0) {
+ if (!rt_task(next) && interactive_sleep(next->sleep_type)) {
unsigned long long delta = now - next->timestamp;
if (unlikely((long long)(now - next->timestamp) < 0))
delta = 0;
- if (next->activated == 1)
+ if (next->sleep_type == SLEEP_INTERACTIVE)
delta = delta * (ON_RUNQUEUE_WEIGHT * 128 / 100) / 128;
array = next->array;
@@ -2998,10 +3027,9 @@
dequeue_task(next, array);
next->prio = new_prio;
enqueue_task(next, array);
- } else
- requeue_task(next, array);
+ }
}
- next->activated = 0;
+ next->sleep_type = SLEEP_NORMAL;
switch_tasks:
if (next == rq->idle)
schedstat_inc(rq, sched_goidle);
diff --git a/kernel/signal.c b/kernel/signal.c
index 4922928..92025b1 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1560,6 +1560,7 @@
/* Let the debugger run. */
set_current_state(TASK_TRACED);
spin_unlock_irq(¤t->sighand->siglock);
+ try_to_freeze();
read_lock(&tasklist_lock);
if (likely(current->ptrace & PT_PTRACED) &&
likely(current->parent != current->real_parent ||
diff --git a/kernel/sys.c b/kernel/sys.c
index 7ef7f60..0b6ec0e 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1372,18 +1372,29 @@
asmlinkage long sys_setsid(void)
{
struct task_struct *group_leader = current->group_leader;
- struct pid *pid;
+ pid_t session;
int err = -EPERM;
mutex_lock(&tty_mutex);
write_lock_irq(&tasklist_lock);
- pid = find_pid(PIDTYPE_PGID, group_leader->pid);
- if (pid)
+ /* Fail if I am already a session leader */
+ if (group_leader->signal->leader)
+ goto out;
+
+ session = group_leader->pid;
+ /* Fail if a process group id already exists that equals the
+ * proposed session id.
+ *
+ * Don't check if session id == 1 because kernel threads use this
+ * session id and so the check will always fail and make it so
+ * init cannot successfully call setsid.
+ */
+ if (session > 1 && find_task_by_pid_type(PIDTYPE_PGID, session))
goto out;
group_leader->signal->leader = 1;
- __set_special_pids(group_leader->pid, group_leader->pid);
+ __set_special_pids(session, session);
group_leader->signal->tty = NULL;
group_leader->signal->tty_old_pgrp = 0;
err = process_group(group_leader);
diff --git a/kernel/timer.c b/kernel/timer.c
index ab189dd..6b812c0 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -54,7 +54,6 @@
/*
* per-CPU timer vector definitions:
*/
-
#define TVN_BITS (CONFIG_BASE_SMALL ? 4 : 6)
#define TVR_BITS (CONFIG_BASE_SMALL ? 6 : 8)
#define TVN_SIZE (1 << TVN_BITS)
@@ -62,11 +61,6 @@
#define TVN_MASK (TVN_SIZE - 1)
#define TVR_MASK (TVR_SIZE - 1)
-struct timer_base_s {
- spinlock_t lock;
- struct timer_list *running_timer;
-};
-
typedef struct tvec_s {
struct list_head vec[TVN_SIZE];
} tvec_t;
@@ -76,7 +70,8 @@
} tvec_root_t;
struct tvec_t_base_s {
- struct timer_base_s t_base;
+ spinlock_t lock;
+ struct timer_list *running_timer;
unsigned long timer_jiffies;
tvec_root_t tv1;
tvec_t tv2;
@@ -87,13 +82,14 @@
typedef struct tvec_t_base_s tvec_base_t;
static DEFINE_PER_CPU(tvec_base_t *, tvec_bases);
-static tvec_base_t boot_tvec_bases;
+tvec_base_t boot_tvec_bases;
+EXPORT_SYMBOL(boot_tvec_bases);
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
{
#ifdef CONFIG_SMP
- base->t_base.running_timer = timer;
+ base->running_timer = timer;
#endif
}
@@ -139,15 +135,6 @@
list_add_tail(&timer->entry, vec);
}
-typedef struct timer_base_s timer_base_t;
-/*
- * Used by TIMER_INITIALIZER, we can't use per_cpu(tvec_bases)
- * at compile time, and we need timer->base to lock the timer.
- */
-timer_base_t __init_timer_base
- ____cacheline_aligned_in_smp = { .lock = SPIN_LOCK_UNLOCKED };
-EXPORT_SYMBOL(__init_timer_base);
-
/***
* init_timer - initialize a timer.
* @timer: the timer to be initialized
@@ -158,7 +145,7 @@
void fastcall init_timer(struct timer_list *timer)
{
timer->entry.next = NULL;
- timer->base = &per_cpu(tvec_bases, raw_smp_processor_id())->t_base;
+ timer->base = per_cpu(tvec_bases, raw_smp_processor_id());
}
EXPORT_SYMBOL(init_timer);
@@ -174,7 +161,7 @@
}
/*
- * We are using hashed locking: holding per_cpu(tvec_bases).t_base.lock
+ * We are using hashed locking: holding per_cpu(tvec_bases).lock
* means that all timers which are tied to this base via timer->base are
* locked, and the base itself is locked too.
*
@@ -185,10 +172,10 @@
* possible to set timer->base = NULL and drop the lock: the timer remains
* locked.
*/
-static timer_base_t *lock_timer_base(struct timer_list *timer,
+static tvec_base_t *lock_timer_base(struct timer_list *timer,
unsigned long *flags)
{
- timer_base_t *base;
+ tvec_base_t *base;
for (;;) {
base = timer->base;
@@ -205,8 +192,7 @@
int __mod_timer(struct timer_list *timer, unsigned long expires)
{
- timer_base_t *base;
- tvec_base_t *new_base;
+ tvec_base_t *base, *new_base;
unsigned long flags;
int ret = 0;
@@ -221,7 +207,7 @@
new_base = __get_cpu_var(tvec_bases);
- if (base != &new_base->t_base) {
+ if (base != new_base) {
/*
* We are trying to schedule the timer on the local CPU.
* However we can't change timer's base while it is running,
@@ -229,21 +215,19 @@
* handler yet has not finished. This also guarantees that
* the timer is serialized wrt itself.
*/
- if (unlikely(base->running_timer == timer)) {
- /* The timer remains on a former base */
- new_base = container_of(base, tvec_base_t, t_base);
- } else {
+ if (likely(base->running_timer != timer)) {
/* See the comment in lock_timer_base() */
timer->base = NULL;
spin_unlock(&base->lock);
- spin_lock(&new_base->t_base.lock);
- timer->base = &new_base->t_base;
+ base = new_base;
+ spin_lock(&base->lock);
+ timer->base = base;
}
}
timer->expires = expires;
- internal_add_timer(new_base, timer);
- spin_unlock_irqrestore(&new_base->t_base.lock, flags);
+ internal_add_timer(base, timer);
+ spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
@@ -263,10 +247,10 @@
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
- spin_lock_irqsave(&base->t_base.lock, flags);
- timer->base = &base->t_base;
+ spin_lock_irqsave(&base->lock, flags);
+ timer->base = base;
internal_add_timer(base, timer);
- spin_unlock_irqrestore(&base->t_base.lock, flags);
+ spin_unlock_irqrestore(&base->lock, flags);
}
@@ -319,7 +303,7 @@
*/
int del_timer(struct timer_list *timer)
{
- timer_base_t *base;
+ tvec_base_t *base;
unsigned long flags;
int ret = 0;
@@ -346,7 +330,7 @@
*/
int try_to_del_timer_sync(struct timer_list *timer)
{
- timer_base_t *base;
+ tvec_base_t *base;
unsigned long flags;
int ret = -1;
@@ -410,7 +394,7 @@
struct timer_list *tmp;
tmp = list_entry(curr, struct timer_list, entry);
- BUG_ON(tmp->base != &base->t_base);
+ BUG_ON(tmp->base != base);
curr = curr->next;
internal_add_timer(base, tmp);
}
@@ -432,7 +416,7 @@
{
struct timer_list *timer;
- spin_lock_irq(&base->t_base.lock);
+ spin_lock_irq(&base->lock);
while (time_after_eq(jiffies, base->timer_jiffies)) {
struct list_head work_list = LIST_HEAD_INIT(work_list);
struct list_head *head = &work_list;
@@ -458,7 +442,7 @@
set_running_timer(base, timer);
detach_timer(timer, 1);
- spin_unlock_irq(&base->t_base.lock);
+ spin_unlock_irq(&base->lock);
{
int preempt_count = preempt_count();
fn(data);
@@ -471,11 +455,11 @@
BUG();
}
}
- spin_lock_irq(&base->t_base.lock);
+ spin_lock_irq(&base->lock);
}
}
set_running_timer(base, NULL);
- spin_unlock_irq(&base->t_base.lock);
+ spin_unlock_irq(&base->lock);
}
#ifdef CONFIG_NO_IDLE_HZ
@@ -506,7 +490,7 @@
hr_expires += jiffies;
base = __get_cpu_var(tvec_bases);
- spin_lock(&base->t_base.lock);
+ spin_lock(&base->lock);
expires = base->timer_jiffies + (LONG_MAX >> 1);
list = NULL;
@@ -554,7 +538,7 @@
expires = nte->expires;
}
}
- spin_unlock(&base->t_base.lock);
+ spin_unlock(&base->lock);
if (time_before(hr_expires, expires))
return hr_expires;
@@ -841,7 +825,7 @@
*/
static unsigned long count_active_tasks(void)
{
- return (nr_running() + nr_uninterruptible()) * FIXED_1;
+ return nr_active() * FIXED_1;
}
/*
@@ -1262,7 +1246,7 @@
}
per_cpu(tvec_bases, cpu) = base;
}
- spin_lock_init(&base->t_base.lock);
+ spin_lock_init(&base->lock);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
INIT_LIST_HEAD(base->tv4.vec + j);
@@ -1284,7 +1268,7 @@
while (!list_empty(head)) {
timer = list_entry(head->next, struct timer_list, entry);
detach_timer(timer, 0);
- timer->base = &new_base->t_base;
+ timer->base = new_base;
internal_add_timer(new_base, timer);
}
}
@@ -1300,11 +1284,11 @@
new_base = get_cpu_var(tvec_bases);
local_irq_disable();
- spin_lock(&new_base->t_base.lock);
- spin_lock(&old_base->t_base.lock);
+ spin_lock(&new_base->lock);
+ spin_lock(&old_base->lock);
- if (old_base->t_base.running_timer)
- BUG();
+ BUG_ON(old_base->running_timer);
+
for (i = 0; i < TVR_SIZE; i++)
migrate_timer_list(new_base, old_base->tv1.vec + i);
for (i = 0; i < TVN_SIZE; i++) {
@@ -1314,8 +1298,8 @@
migrate_timer_list(new_base, old_base->tv5.vec + i);
}
- spin_unlock(&old_base->t_base.lock);
- spin_unlock(&new_base->t_base.lock);
+ spin_unlock(&old_base->lock);
+ spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(tvec_bases);
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6e8a60f..d57fd91 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -157,19 +157,6 @@
If unsure, say N.
-config DEBUG_IOREMAP
- bool "Enable ioremap() debugging"
- depends on DEBUG_KERNEL && PARISC
- help
- Enabling this option will cause the kernel to distinguish between
- ioremapped and physical addresses. It will print a backtrace (at
- most one every 10 seconds), hopefully allowing you to see which
- drivers need work. Fixing all these problems is a prerequisite
- for turning on USE_HPPA_IOREMAP. The warnings are harmless;
- the kernel has enough information to fix the broken drivers
- automatically, but we'd like to make it more efficient by not
- having to do that.
-
config DEBUG_FS
bool "Debug Filesystem"
depends on SYSFS
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 907c392..0a03357 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -35,17 +35,6 @@
*
* LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk.
*
- * LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently
- * dirty pages at the disk.
- *
- * LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push
- * all of the currently dirty pages at the disk, wait until they have been
- * written.
- *
- * It should be noted that none of these operations write out the file's
- * metadata. So unless the application is strictly performing overwrites of
- * already-instantiated disk blocks, there are no guarantees here that the data
- * will be available after a crash.
*/
asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
{
@@ -129,15 +118,6 @@
invalidate_mapping_pages(mapping, start_index,
end_index);
break;
- case LINUX_FADV_ASYNC_WRITE:
- ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
- WB_SYNC_NONE);
- break;
- case LINUX_FADV_WRITE_WAIT:
- ret = wait_on_page_writeback_range(mapping,
- offset >> PAGE_CACHE_SHIFT,
- endbyte >> PAGE_CACHE_SHIFT);
- break;
default:
ret = -EINVAL;
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ebad6bb..832f676 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -334,6 +334,7 @@
return nr_huge_pages;
spin_lock(&hugetlb_lock);
+ count = max(count, reserved_huge_pages);
try_to_free_low(count);
while (count < nr_huge_pages) {
struct page *page = dequeue_huge_page(NULL, 0);
@@ -697,9 +698,10 @@
pfn_offset = (vaddr & ~HPAGE_MASK) >> PAGE_SHIFT;
page = pte_page(*pte);
same_page:
- get_page(page);
- if (pages)
+ if (pages) {
+ get_page(page);
pages[i] = page + pfn_offset;
+ }
if (vmas)
vmas[i] = vma;
diff --git a/mm/memory.c b/mm/memory.c
index 8d8f525..0ec7bc6 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -87,7 +87,7 @@
static int __init disable_randmaps(char *s)
{
randomize_va_space = 0;
- return 0;
+ return 1;
}
__setup("norandmaps", disable_randmaps);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 39aa9d1..e5fd538 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -397,18 +397,24 @@
p = swap_info_get(entry);
if (p) {
- if (swap_entry_free(p, swp_offset(entry)) == 1)
- page = find_trylock_page(&swapper_space, entry.val);
+ if (swap_entry_free(p, swp_offset(entry)) == 1) {
+ page = find_get_page(&swapper_space, entry.val);
+ if (page && unlikely(TestSetPageLocked(page))) {
+ page_cache_release(page);
+ page = NULL;
+ }
+ }
spin_unlock(&swap_lock);
}
if (page) {
int one_user;
BUG_ON(PagePrivate(page));
- page_cache_get(page);
one_user = (page_count(page) == 2);
/* Only cache user (+us), or swap space full? Free it! */
- if (!PageWriteback(page) && (one_user || vm_swap_full())) {
+ /* Also recheck PageSwapCache after page is locked (above) */
+ if (PageSwapCache(page) && !PageWriteback(page) &&
+ (one_user || vm_swap_full())) {
delete_from_swap_cache(page);
SetPageDirty(page);
}
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 697ac55..7b1eb9a 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1819,6 +1819,22 @@
return rc;
}
+
+#ifdef CONFIG_COMPAT
+static int atalk_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ /*
+ * All Appletalk ioctls except SIOCATALKDIFADDR are standard. And
+ * SIOCATALKDIFADDR is handled by upper layer as well, so there is
+ * nothing to do. Eventually SIOCATALKDIFADDR should be moved
+ * here so there is no generic SIOCPROTOPRIVATE translation in the
+ * system.
+ */
+ return -ENOIOCTLCMD;
+}
+#endif
+
+
static struct net_proto_family atalk_family_ops = {
.family = PF_APPLETALK,
.create = atalk_create,
@@ -1836,6 +1852,9 @@
.getname = atalk_getname,
.poll = datagram_poll,
.ioctl = atalk_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = atalk_compat_ioctl,
+#endif
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = sock_no_setsockopt,
diff --git a/net/bridge/netfilter/ebt_802_3.c b/net/bridge/netfilter/ebt_802_3.c
index 468ebdf..d42f63f 100644
--- a/net/bridge/netfilter/ebt_802_3.c
+++ b/net/bridge/netfilter/ebt_802_3.c
@@ -58,16 +58,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_802_3_init(void)
{
return ebt_register_match(&filter_802_3);
}
-static void __exit fini(void)
+static void __exit ebt_802_3_fini(void)
{
ebt_unregister_match(&filter_802_3);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_802_3_init);
+module_exit(ebt_802_3_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_among.c b/net/bridge/netfilter/ebt_among.c
index 5a1f5e3..a614485 100644
--- a/net/bridge/netfilter/ebt_among.c
+++ b/net/bridge/netfilter/ebt_among.c
@@ -213,16 +213,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_among_init(void)
{
return ebt_register_match(&filter_among);
}
-static void __exit fini(void)
+static void __exit ebt_among_fini(void)
{
ebt_unregister_match(&filter_among);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_among_init);
+module_exit(ebt_among_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_arp.c b/net/bridge/netfilter/ebt_arp.c
index b94c48c..a6c81d9 100644
--- a/net/bridge/netfilter/ebt_arp.c
+++ b/net/bridge/netfilter/ebt_arp.c
@@ -125,16 +125,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_arp_init(void)
{
return ebt_register_match(&filter_arp);
}
-static void __exit fini(void)
+static void __exit ebt_arp_fini(void)
{
ebt_unregister_match(&filter_arp);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_arp_init);
+module_exit(ebt_arp_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_arpreply.c b/net/bridge/netfilter/ebt_arpreply.c
index b934de9..d19fc4b 100644
--- a/net/bridge/netfilter/ebt_arpreply.c
+++ b/net/bridge/netfilter/ebt_arpreply.c
@@ -82,16 +82,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_arpreply_init(void)
{
return ebt_register_target(&reply_target);
}
-static void __exit fini(void)
+static void __exit ebt_arpreply_fini(void)
{
ebt_unregister_target(&reply_target);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_arpreply_init);
+module_exit(ebt_arpreply_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_dnat.c b/net/bridge/netfilter/ebt_dnat.c
index f546308..4582659 100644
--- a/net/bridge/netfilter/ebt_dnat.c
+++ b/net/bridge/netfilter/ebt_dnat.c
@@ -61,16 +61,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_dnat_init(void)
{
return ebt_register_target(&dnat);
}
-static void __exit fini(void)
+static void __exit ebt_dnat_fini(void)
{
ebt_unregister_target(&dnat);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_dnat_init);
+module_exit(ebt_dnat_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_ip.c b/net/bridge/netfilter/ebt_ip.c
index dc5d0b2..65b665c 100644
--- a/net/bridge/netfilter/ebt_ip.c
+++ b/net/bridge/netfilter/ebt_ip.c
@@ -112,16 +112,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_ip_init(void)
{
return ebt_register_match(&filter_ip);
}
-static void __exit fini(void)
+static void __exit ebt_ip_fini(void)
{
ebt_unregister_match(&filter_ip);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_ip_init);
+module_exit(ebt_ip_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_limit.c b/net/bridge/netfilter/ebt_limit.c
index 637c884..d48fa5c 100644
--- a/net/bridge/netfilter/ebt_limit.c
+++ b/net/bridge/netfilter/ebt_limit.c
@@ -98,16 +98,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_limit_init(void)
{
return ebt_register_match(&ebt_limit_reg);
}
-static void __exit fini(void)
+static void __exit ebt_limit_fini(void)
{
ebt_unregister_match(&ebt_limit_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_limit_init);
+module_exit(ebt_limit_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index 288ff1d..d159c92 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -188,7 +188,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_log_init(void)
{
int ret;
@@ -205,12 +205,12 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ebt_log_fini(void)
{
nf_log_unregister_logger(&ebt_log_logger);
ebt_unregister_watcher(&log);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_log_init);
+module_exit(ebt_log_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_mark.c b/net/bridge/netfilter/ebt_mark.c
index c93d35a..770c0df 100644
--- a/net/bridge/netfilter/ebt_mark.c
+++ b/net/bridge/netfilter/ebt_mark.c
@@ -52,16 +52,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_mark_init(void)
{
return ebt_register_target(&mark_target);
}
-static void __exit fini(void)
+static void __exit ebt_mark_fini(void)
{
ebt_unregister_target(&mark_target);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_mark_init);
+module_exit(ebt_mark_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_mark_m.c b/net/bridge/netfilter/ebt_mark_m.c
index 625102d..a6413e4 100644
--- a/net/bridge/netfilter/ebt_mark_m.c
+++ b/net/bridge/netfilter/ebt_mark_m.c
@@ -47,16 +47,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_mark_m_init(void)
{
return ebt_register_match(&filter_mark);
}
-static void __exit fini(void)
+static void __exit ebt_mark_m_fini(void)
{
ebt_unregister_match(&filter_mark);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_mark_m_init);
+module_exit(ebt_mark_m_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_pkttype.c b/net/bridge/netfilter/ebt_pkttype.c
index ecd3b42..4fffd70 100644
--- a/net/bridge/netfilter/ebt_pkttype.c
+++ b/net/bridge/netfilter/ebt_pkttype.c
@@ -44,16 +44,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_pkttype_init(void)
{
return ebt_register_match(&filter_pkttype);
}
-static void __exit fini(void)
+static void __exit ebt_pkttype_fini(void)
{
ebt_unregister_match(&filter_pkttype);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_pkttype_init);
+module_exit(ebt_pkttype_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_redirect.c b/net/bridge/netfilter/ebt_redirect.c
index 1538b43..9f378ea 100644
--- a/net/bridge/netfilter/ebt_redirect.c
+++ b/net/bridge/netfilter/ebt_redirect.c
@@ -66,16 +66,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_redirect_init(void)
{
return ebt_register_target(&redirect_target);
}
-static void __exit fini(void)
+static void __exit ebt_redirect_fini(void)
{
ebt_unregister_target(&redirect_target);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_redirect_init);
+module_exit(ebt_redirect_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_snat.c b/net/bridge/netfilter/ebt_snat.c
index 1529bdc..cbb33e2 100644
--- a/net/bridge/netfilter/ebt_snat.c
+++ b/net/bridge/netfilter/ebt_snat.c
@@ -61,16 +61,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_snat_init(void)
{
return ebt_register_target(&snat);
}
-static void __exit fini(void)
+static void __exit ebt_snat_fini(void)
{
ebt_unregister_target(&snat);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_snat_init);
+module_exit(ebt_snat_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_stp.c b/net/bridge/netfilter/ebt_stp.c
index 0248c67..a0bed82 100644
--- a/net/bridge/netfilter/ebt_stp.c
+++ b/net/bridge/netfilter/ebt_stp.c
@@ -180,16 +180,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_stp_init(void)
{
return ebt_register_match(&filter_stp);
}
-static void __exit fini(void)
+static void __exit ebt_stp_fini(void)
{
ebt_unregister_match(&filter_stp);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_stp_init);
+module_exit(ebt_stp_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index 802baf7..ee5a517 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -281,7 +281,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_ulog_init(void)
{
int i, ret = 0;
@@ -316,7 +316,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ebt_ulog_fini(void)
{
ebt_ulog_buff_t *ub;
int i;
@@ -337,8 +337,8 @@
sock_release(ebtulognl->sk_socket);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_ulog_init);
+module_exit(ebt_ulog_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Bart De Schuymer <bdschuym@pandora.be>");
MODULE_DESCRIPTION("ebtables userspace logging module for bridged Ethernet"
diff --git a/net/bridge/netfilter/ebt_vlan.c b/net/bridge/netfilter/ebt_vlan.c
index db60d73..a2b4528 100644
--- a/net/bridge/netfilter/ebt_vlan.c
+++ b/net/bridge/netfilter/ebt_vlan.c
@@ -178,7 +178,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ebt_vlan_init(void)
{
DEBUG_MSG("ebtables 802.1Q extension module v"
MODULE_VERS "\n");
@@ -186,10 +186,10 @@
return ebt_register_match(&filter_vlan);
}
-static void __exit fini(void)
+static void __exit ebt_vlan_fini(void)
{
ebt_unregister_match(&filter_vlan);
}
-module_init(init);
-module_exit(fini);
+module_init(ebt_vlan_init);
+module_exit(ebt_vlan_fini);
diff --git a/net/bridge/netfilter/ebtable_broute.c b/net/bridge/netfilter/ebtable_broute.c
index 1767c94..9a6e548 100644
--- a/net/bridge/netfilter/ebtable_broute.c
+++ b/net/bridge/netfilter/ebtable_broute.c
@@ -62,7 +62,7 @@
return 0; /* bridge it */
}
-static int __init init(void)
+static int __init ebtable_broute_init(void)
{
int ret;
@@ -74,13 +74,13 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ebtable_broute_fini(void)
{
br_should_route_hook = NULL;
synchronize_net();
ebt_unregister_table(&broute_table);
}
-module_init(init);
-module_exit(fini);
+module_init(ebtable_broute_init);
+module_exit(ebtable_broute_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebtable_filter.c b/net/bridge/netfilter/ebtable_filter.c
index c18666e..3d5bd44 100644
--- a/net/bridge/netfilter/ebtable_filter.c
+++ b/net/bridge/netfilter/ebtable_filter.c
@@ -91,7 +91,7 @@
},
};
-static int __init init(void)
+static int __init ebtable_filter_init(void)
{
int i, j, ret;
@@ -109,7 +109,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ebtable_filter_fini(void)
{
int i;
@@ -118,6 +118,6 @@
ebt_unregister_table(&frame_filter);
}
-module_init(init);
-module_exit(fini);
+module_init(ebtable_filter_init);
+module_exit(ebtable_filter_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebtable_nat.c b/net/bridge/netfilter/ebtable_nat.c
index 828cac2..04dd42e 100644
--- a/net/bridge/netfilter/ebtable_nat.c
+++ b/net/bridge/netfilter/ebtable_nat.c
@@ -98,7 +98,7 @@
},
};
-static int __init init(void)
+static int __init ebtable_nat_init(void)
{
int i, ret, j;
@@ -116,7 +116,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ebtable_nat_fini(void)
{
int i;
@@ -125,6 +125,6 @@
ebt_unregister_table(&frame_nat);
}
-module_init(init);
-module_exit(fini);
+module_init(ebtable_nat_init);
+module_exit(ebtable_nat_fini);
MODULE_LICENSE("GPL");
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 9979533..01eae97 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1487,7 +1487,7 @@
.get = do_ebt_get_ctl,
};
-static int __init init(void)
+static int __init ebtables_init(void)
{
int ret;
@@ -1501,7 +1501,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ebtables_fini(void)
{
nf_unregister_sockopt(&ebt_sockopts);
printk(KERN_NOTICE "Ebtables v2.0 unregistered\n");
@@ -1516,6 +1516,6 @@
EXPORT_SYMBOL(ebt_register_target);
EXPORT_SYMBOL(ebt_unregister_target);
EXPORT_SYMBOL(ebt_do_table);
-module_init(init);
-module_exit(fini);
+module_init(ebtables_init);
+module_exit(ebtables_fini);
MODULE_LICENSE("GPL");
diff --git a/net/core/dev.c b/net/core/dev.c
index a3ab11f..434220d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1080,6 +1080,70 @@
rcu_read_unlock();
}
+
+void __netif_schedule(struct net_device *dev)
+{
+ if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) {
+ unsigned long flags;
+ struct softnet_data *sd;
+
+ local_irq_save(flags);
+ sd = &__get_cpu_var(softnet_data);
+ dev->next_sched = sd->output_queue;
+ sd->output_queue = dev;
+ raise_softirq_irqoff(NET_TX_SOFTIRQ);
+ local_irq_restore(flags);
+ }
+}
+EXPORT_SYMBOL(__netif_schedule);
+
+void __netif_rx_schedule(struct net_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ dev_hold(dev);
+ list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
+ if (dev->quota < 0)
+ dev->quota += dev->weight;
+ else
+ dev->quota = dev->weight;
+ __raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__netif_rx_schedule);
+
+void dev_kfree_skb_any(struct sk_buff *skb)
+{
+ if (in_irq() || irqs_disabled())
+ dev_kfree_skb_irq(skb);
+ else
+ dev_kfree_skb(skb);
+}
+EXPORT_SYMBOL(dev_kfree_skb_any);
+
+
+/* Hot-plugging. */
+void netif_device_detach(struct net_device *dev)
+{
+ if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
+ netif_running(dev)) {
+ netif_stop_queue(dev);
+ }
+}
+EXPORT_SYMBOL(netif_device_detach);
+
+void netif_device_attach(struct net_device *dev)
+{
+ if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
+ netif_running(dev)) {
+ netif_wake_queue(dev);
+ __netdev_watchdog_up(dev);
+ }
+}
+EXPORT_SYMBOL(netif_device_attach);
+
+
/*
* Invalidate hardware checksum when packet is to be mangled, and
* complete checksum manually on outgoing path.
diff --git a/net/core/sock.c b/net/core/sock.c
index e110b90..ed2afdb 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -187,6 +187,99 @@
}
+int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+ int err = 0;
+ int skb_len;
+
+ /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
+ number of warnings when compiling with -W --ANK
+ */
+ if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
+ (unsigned)sk->sk_rcvbuf) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* It would be deadlock, if sock_queue_rcv_skb is used
+ with socket lock! We assume that users of this
+ function are lock free.
+ */
+ err = sk_filter(sk, skb, 1);
+ if (err)
+ goto out;
+
+ skb->dev = NULL;
+ skb_set_owner_r(skb, sk);
+
+ /* Cache the SKB length before we tack it onto the receive
+ * queue. Once it is added it no longer belongs to us and
+ * may be freed by other threads of control pulling packets
+ * from the queue.
+ */
+ skb_len = skb->len;
+
+ skb_queue_tail(&sk->sk_receive_queue, skb);
+
+ if (!sock_flag(sk, SOCK_DEAD))
+ sk->sk_data_ready(sk, skb_len);
+out:
+ return err;
+}
+EXPORT_SYMBOL(sock_queue_rcv_skb);
+
+int sk_receive_skb(struct sock *sk, struct sk_buff *skb)
+{
+ int rc = NET_RX_SUCCESS;
+
+ if (sk_filter(sk, skb, 0))
+ goto discard_and_relse;
+
+ skb->dev = NULL;
+
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ rc = sk->sk_backlog_rcv(sk, skb);
+ else
+ sk_add_backlog(sk, skb);
+ bh_unlock_sock(sk);
+out:
+ sock_put(sk);
+ return rc;
+discard_and_relse:
+ kfree_skb(skb);
+ goto out;
+}
+EXPORT_SYMBOL(sk_receive_skb);
+
+struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
+{
+ struct dst_entry *dst = sk->sk_dst_cache;
+
+ if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+ sk->sk_dst_cache = NULL;
+ dst_release(dst);
+ return NULL;
+ }
+
+ return dst;
+}
+EXPORT_SYMBOL(__sk_dst_check);
+
+struct dst_entry *sk_dst_check(struct sock *sk, u32 cookie)
+{
+ struct dst_entry *dst = sk_dst_get(sk);
+
+ if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+ sk_dst_reset(sk);
+ dst_release(dst);
+ return NULL;
+ }
+
+ return dst;
+}
+EXPORT_SYMBOL(sk_dst_check);
+
/*
* This is meant for all protocols to use and covers goings on
* at the socket level. Everything here is generic.
@@ -292,7 +385,21 @@
val = sysctl_rmem_max;
set_rcvbuf:
sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
- /* FIXME: is this lower bound the right one? */
+ /*
+ * We double it on the way in to account for
+ * "struct sk_buff" etc. overhead. Applications
+ * assume that the SO_RCVBUF setting they make will
+ * allow that much actual data to be received on that
+ * socket.
+ *
+ * Applications are unaware that "struct sk_buff" and
+ * other overheads allocate from the receive buffer
+ * during socket buffer allocation.
+ *
+ * And after considering the possible alternatives,
+ * returning the value we actually used in getsockopt
+ * is the most desirable behavior.
+ */
if ((val * 2) < SOCK_MIN_RCVBUF)
sk->sk_rcvbuf = SOCK_MIN_RCVBUF;
else
diff --git a/net/dccp/feat.c b/net/dccp/feat.c
index e3dd30d..b39e2a5 100644
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -204,7 +204,7 @@
if (rc) {
kfree(opt->dccpop_sc->dccpoc_val);
kfree(opt->dccpop_sc);
- opt->dccpop_sc = 0;
+ opt->dccpop_sc = NULL;
return rc;
}
@@ -322,7 +322,7 @@
opt->dccpop_type = type == DCCPO_CHANGE_L ? DCCPO_CONFIRM_R :
DCCPO_CONFIRM_L;
opt->dccpop_feat = feature;
- opt->dccpop_val = 0;
+ opt->dccpop_val = NULL;
opt->dccpop_len = 0;
/* change feature */
@@ -523,7 +523,7 @@
* once...
*/
/* the master socket no longer needs to worry about confirms */
- opt->dccpop_sc = 0; /* it's not a memleak---new socket has it */
+ opt->dccpop_sc = NULL; /* it's not a memleak---new socket has it */
/* reset state for a new socket */
opt->dccpop_conf = 0;
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index d2ae989..a26ff9f 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -620,7 +620,7 @@
}
write_unlock(&dndev_lock);
if (old)
- dev_put(dev);
+ dev_put(old);
return rv;
}
diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c
index 16a5a31..74133ec 100644
--- a/net/decnet/netfilter/dn_rtmsg.c
+++ b/net/decnet/netfilter/dn_rtmsg.c
@@ -133,7 +133,7 @@
.priority = NF_DN_PRI_DNRTMSG,
};
-static int __init init(void)
+static int __init dn_rtmsg_init(void)
{
int rv = 0;
@@ -152,7 +152,7 @@
return rv;
}
-static void __exit fini(void)
+static void __exit dn_rtmsg_fini(void)
{
nf_unregister_hook(&dnrmg_ops);
sock_release(dnrmg->sk_socket);
@@ -164,6 +164,6 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_DNRTMSG);
-module_init(init);
-module_exit(fini);
+module_init(dn_rtmsg_init);
+module_exit(dn_rtmsg_fini);
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index c792994..8682656 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -42,6 +42,7 @@
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
#include <linux/bitops.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -49,6 +50,7 @@
static const struct proto_ops econet_ops;
static struct hlist_head econet_sklist;
static DEFINE_RWLOCK(econet_lock);
+static DEFINE_MUTEX(econet_mutex);
/* Since there are only 256 possible network numbers (or fewer, depends
how you count) it makes sense to use a simple lookup table. */
@@ -124,6 +126,8 @@
msg->msg_namelen = sizeof(struct sockaddr_ec);
+ mutex_lock(&econet_mutex);
+
/*
* Call the generic datagram receiver. This handles all sorts
* of horrible races and re-entrancy so we can forget about it
@@ -174,6 +178,7 @@
out_free:
skb_free_datagram(sk, skb);
out:
+ mutex_unlock(&econet_mutex);
return err;
}
@@ -184,8 +189,8 @@
static int econet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
struct sockaddr_ec *sec = (struct sockaddr_ec *)uaddr;
- struct sock *sk=sock->sk;
- struct econet_sock *eo = ec_sk(sk);
+ struct sock *sk;
+ struct econet_sock *eo;
/*
* Check legality
@@ -195,11 +200,18 @@
sec->sec_family != AF_ECONET)
return -EINVAL;
+ mutex_lock(&econet_mutex);
+
+ sk = sock->sk;
+ eo = ec_sk(sk);
+
eo->cb = sec->cb;
eo->port = sec->port;
eo->station = sec->addr.station;
eo->net = sec->addr.net;
+ mutex_unlock(&econet_mutex);
+
return 0;
}
@@ -284,6 +296,8 @@
* Get and verify the address.
*/
+ mutex_lock(&econet_mutex);
+
if (saddr == NULL) {
struct econet_sock *eo = ec_sk(sk);
@@ -292,8 +306,10 @@
port = eo->port;
cb = eo->cb;
} else {
- if (msg->msg_namelen < sizeof(struct sockaddr_ec))
+ if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+ mutex_unlock(&econet_mutex);
return -EINVAL;
+ }
addr.station = saddr->addr.station;
addr.net = saddr->addr.net;
port = saddr->port;
@@ -304,19 +320,21 @@
dev = net2dev_map[addr.net];
/* If not directly reachable, use some default */
- if (dev == NULL)
- {
+ if (dev == NULL) {
dev = net2dev_map[0];
/* No interfaces at all? */
- if (dev == NULL)
+ if (dev == NULL) {
+ mutex_unlock(&econet_mutex);
return -ENETDOWN;
+ }
}
- if (len + 15 > dev->mtu)
+ if (len + 15 > dev->mtu) {
+ mutex_unlock(&econet_mutex);
return -EMSGSIZE;
+ }
- if (dev->type == ARPHRD_ECONET)
- {
+ if (dev->type == ARPHRD_ECONET) {
/* Real hardware Econet. We're not worthy etc. */
#ifdef CONFIG_ECONET_NATIVE
unsigned short proto = 0;
@@ -374,6 +392,7 @@
dev_queue_xmit(skb);
dev_put(dev);
+ mutex_unlock(&econet_mutex);
return(len);
out_free:
@@ -384,14 +403,18 @@
#else
err = -EPROTOTYPE;
#endif
+ mutex_unlock(&econet_mutex);
+
return err;
}
#ifdef CONFIG_ECONET_AUNUDP
/* AUN virtual Econet. */
- if (udpsock == NULL)
+ if (udpsock == NULL) {
+ mutex_unlock(&econet_mutex);
return -ENETDOWN; /* No socket - can't send */
+ }
/* Make up a UDP datagram and hand it off to some higher intellect. */
@@ -438,8 +461,10 @@
void __user *base = msg->msg_iov[i].iov_base;
size_t len = msg->msg_iov[i].iov_len;
/* Check it now since we switch to KERNEL_DS later. */
- if (!access_ok(VERIFY_READ, base, len))
+ if (!access_ok(VERIFY_READ, base, len)) {
+ mutex_unlock(&econet_mutex);
return -EFAULT;
+ }
iov[i+1].iov_base = base;
iov[i+1].iov_len = len;
size += len;
@@ -447,8 +472,11 @@
/* Get a skbuff (no data, just holds our cb information) */
if ((skb = sock_alloc_send_skb(sk, 0,
- msg->msg_flags & MSG_DONTWAIT, &err)) == NULL)
+ msg->msg_flags & MSG_DONTWAIT,
+ &err)) == NULL) {
+ mutex_unlock(&econet_mutex);
return err;
+ }
eb = (struct ec_cb *)&skb->cb;
@@ -475,6 +503,8 @@
#else
err = -EPROTOTYPE;
#endif
+ mutex_unlock(&econet_mutex);
+
return err;
}
@@ -485,18 +515,25 @@
static int econet_getname(struct socket *sock, struct sockaddr *uaddr,
int *uaddr_len, int peer)
{
- struct sock *sk = sock->sk;
- struct econet_sock *eo = ec_sk(sk);
+ struct sock *sk;
+ struct econet_sock *eo;
struct sockaddr_ec *sec = (struct sockaddr_ec *)uaddr;
if (peer)
return -EOPNOTSUPP;
+ mutex_lock(&econet_mutex);
+
+ sk = sock->sk;
+ eo = ec_sk(sk);
+
sec->sec_family = AF_ECONET;
sec->port = eo->port;
sec->addr.station = eo->station;
sec->addr.net = eo->net;
+ mutex_unlock(&econet_mutex);
+
*uaddr_len = sizeof(*sec);
return 0;
}
@@ -522,10 +559,13 @@
static int econet_release(struct socket *sock)
{
- struct sock *sk = sock->sk;
+ struct sock *sk;
+ mutex_lock(&econet_mutex);
+
+ sk = sock->sk;
if (!sk)
- return 0;
+ goto out_unlock;
econet_remove_socket(&econet_sklist, sk);
@@ -549,10 +589,14 @@
sk->sk_timer.expires = jiffies + HZ;
sk->sk_timer.function = econet_destroy_timer;
add_timer(&sk->sk_timer);
- return 0;
+
+ goto out_unlock;
}
sk_free(sk);
+
+out_unlock:
+ mutex_unlock(&econet_mutex);
return 0;
}
@@ -608,6 +652,7 @@
struct ec_device *edev;
struct net_device *dev;
struct sockaddr_ec *sec;
+ int err;
/*
* Fetch the caller's info block into kernel space
@@ -621,38 +666,35 @@
sec = (struct sockaddr_ec *)&ifr.ifr_addr;
- switch (cmd)
- {
+ mutex_lock(&econet_mutex);
+
+ err = 0;
+ switch (cmd) {
case SIOCSIFADDR:
edev = dev->ec_ptr;
- if (edev == NULL)
- {
+ if (edev == NULL) {
/* Magic up a new one. */
edev = kmalloc(sizeof(struct ec_device), GFP_KERNEL);
if (edev == NULL) {
- printk("af_ec: memory squeeze.\n");
- dev_put(dev);
- return -ENOMEM;
+ err = -ENOMEM;
+ break;
}
memset(edev, 0, sizeof(struct ec_device));
dev->ec_ptr = edev;
- }
- else
+ } else
net2dev_map[edev->net] = NULL;
edev->station = sec->addr.station;
edev->net = sec->addr.net;
net2dev_map[sec->addr.net] = dev;
if (!net2dev_map[0])
net2dev_map[0] = dev;
- dev_put(dev);
- return 0;
+ break;
case SIOCGIFADDR:
edev = dev->ec_ptr;
- if (edev == NULL)
- {
- dev_put(dev);
- return -ENODEV;
+ if (edev == NULL) {
+ err = -ENODEV;
+ break;
}
memset(sec, 0, sizeof(struct sockaddr_ec));
sec->addr.station = edev->station;
@@ -660,12 +702,19 @@
sec->sec_family = AF_ECONET;
dev_put(dev);
if (copy_to_user(arg, &ifr, sizeof(struct ifreq)))
- return -EFAULT;
- return 0;
+ err = -EFAULT;
+ break;
+
+ default:
+ err = -EINVAL;
+ break;
}
+ mutex_unlock(&econet_mutex);
+
dev_put(dev);
- return -EINVAL;
+
+ return err;
}
/*
@@ -699,7 +748,7 @@
.owner = THIS_MODULE,
};
-static const struct proto_ops SOCKOPS_WRAPPED(econet_ops) = {
+static const struct proto_ops econet_ops = {
.family = PF_ECONET,
.owner = THIS_MODULE,
.release = econet_release,
@@ -720,9 +769,6 @@
.sendpage = sock_no_sendpage,
};
-#include <linux/smp_lock.h>
-SOCKOPS_WRAP(econet, PF_ECONET);
-
#if defined(CONFIG_ECONET_AUNUDP) || defined(CONFIG_ECONET_NATIVE)
/*
* Find the listening socket, if any, for the given data.
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index af7f9bb..b885fd1 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -42,7 +42,7 @@
};
#define MAX_CUSTOM_LEN 64
-static char *ipw2100_translate_scan(struct ieee80211_device *ieee,
+static char *ieee80211_translate_scan(struct ieee80211_device *ieee,
char *start, char *stop,
struct ieee80211_network *network)
{
@@ -274,7 +274,7 @@
if (ieee->scan_age == 0 ||
time_after(network->last_scanned + ieee->scan_age, jiffies))
- ev = ipw2100_translate_scan(ieee, ev, stop, network);
+ ev = ieee80211_translate_scan(ieee, ev, stop, network);
else
IEEE80211_DEBUG_SCAN("Not showing network '%s ("
MAC_FMT ")' due to age (%dms).\n",
diff --git a/net/ieee80211/softmac/ieee80211softmac_module.c b/net/ieee80211/softmac/ieee80211softmac_module.c
index 6f99f78..60f06a31 100644
--- a/net/ieee80211/softmac/ieee80211softmac_module.c
+++ b/net/ieee80211/softmac/ieee80211softmac_module.c
@@ -183,16 +183,21 @@
*/
if (mac->txrates_change)
oldrates = mac->txrates;
- if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
- mac->txrates.default_rate = IEEE80211_OFDM_RATE_54MB;
- change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT;
- mac->txrates.default_fallback = IEEE80211_OFDM_RATE_24MB;
- change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT_FBACK;
- } else if (ieee->modulation & IEEE80211_CCK_MODULATION) {
+ /* FIXME: We don't correctly handle backing down to lower
+ rates, so 801.11g devices start off at 11M for now. People
+ can manually change it if they really need to, but 11M is
+ more reliable. Note similar logic in
+ ieee80211softmac_wx_set_rate() */
+ if (ieee->modulation & IEEE80211_CCK_MODULATION) {
mac->txrates.default_rate = IEEE80211_CCK_RATE_11MB;
change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT;
mac->txrates.default_fallback = IEEE80211_CCK_RATE_5MB;
change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT_FBACK;
+ } else if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
+ mac->txrates.default_rate = IEEE80211_OFDM_RATE_54MB;
+ change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT;
+ mac->txrates.default_fallback = IEEE80211_OFDM_RATE_24MB;
+ change |= IEEE80211SOFTMAC_TXRATECHG_DEFAULT_FBACK;
} else
assert(0);
if (mac->txrates_change)
diff --git a/net/ieee80211/softmac/ieee80211softmac_priv.h b/net/ieee80211/softmac/ieee80211softmac_priv.h
index 9ba7dbd..65d9816 100644
--- a/net/ieee80211/softmac/ieee80211softmac_priv.h
+++ b/net/ieee80211/softmac/ieee80211softmac_priv.h
@@ -167,7 +167,7 @@
) || ieee80211softmac_scan_handlers_check_self(sm);
}
-#define IEEE80211SOFTMAC_PROBE_DELAY HZ/2
+#define IEEE80211SOFTMAC_PROBE_DELAY HZ/50
#define IEEE80211SOFTMAC_WORKQUEUE_NAME_LEN (17 + IFNAMSIZ)
struct ieee80211softmac_network {
diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c
index e1a9bc6..b559aa9 100644
--- a/net/ieee80211/softmac/ieee80211softmac_wx.c
+++ b/net/ieee80211/softmac/ieee80211softmac_wx.c
@@ -135,11 +135,15 @@
int err = -EINVAL;
if (in_rate == -1) {
- /* automatic detect */
- if (ieee->modulation & IEEE80211_OFDM_MODULATION)
- in_rate = 54000000;
- else
+ /* FIXME: We don't correctly handle backing down to lower
+ rates, so 801.11g devices start off at 11M for now. People
+ can manually change it if they really need to, but 11M is
+ more reliable. Note similar logic in
+ ieee80211softmac_wx_set_rate() */
+ if (ieee->modulation & IEEE80211_CCK_MODULATION)
in_rate = 11000000;
+ else
+ in_rate = 54000000;
}
switch (in_rate) {
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 011cca7..e40f753 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -235,6 +235,7 @@
# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
config NET_IPIP
tristate "IP: tunneling"
+ select INET_TUNNEL
---help---
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
@@ -395,7 +396,7 @@
config INET_IPCOMP
tristate "IP: IPComp transformation"
select XFRM
- select INET_TUNNEL
+ select INET_XFRM_TUNNEL
select CRYPTO
select CRYPTO_DEFLATE
---help---
@@ -404,14 +405,14 @@
If unsure, say Y.
+config INET_XFRM_TUNNEL
+ tristate
+ select INET_TUNNEL
+ default n
+
config INET_TUNNEL
- tristate "IP: tunnel transformation"
- select XFRM
- ---help---
- Support for generic IP tunnel transformation, which is required by
- the IP tunneling module as well as tunnel mode IPComp.
-
- If unsure, say Y.
+ tristate
+ default n
config INET_DIAG
tristate "INET: socket monitoring interface"
diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile
index 35e5f59..9ef50a0 100644
--- a/net/ipv4/Makefile
+++ b/net/ipv4/Makefile
@@ -22,7 +22,8 @@
obj-$(CONFIG_INET_AH) += ah4.o
obj-$(CONFIG_INET_ESP) += esp4.o
obj-$(CONFIG_INET_IPCOMP) += ipcomp.o
-obj-$(CONFIG_INET_TUNNEL) += xfrm4_tunnel.o
+obj-$(CONFIG_INET_XFRM_TUNNEL) += xfrm4_tunnel.o
+obj-$(CONFIG_INET_TUNNEL) += tunnel4.o
obj-$(CONFIG_IP_PNP) += ipconfig.o
obj-$(CONFIG_IP_ROUTE_MULTIPATH_RR) += multipath_rr.o
obj-$(CONFIG_IP_ROUTE_MULTIPATH_RANDOM) += multipath_random.o
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 03d1374..eef07b0 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -114,7 +114,6 @@
#include <net/sock.h>
#include <net/ip.h>
#include <net/icmp.h>
-#include <net/protocol.h>
#include <net/ipip.h>
#include <net/inet_ecn.h>
#include <net/xfrm.h>
@@ -274,7 +273,7 @@
dev_put(dev);
}
-static void ipip_err(struct sk_buff *skb, u32 info)
+static int ipip_err(struct sk_buff *skb, u32 info)
{
#ifndef I_WISH_WORLD_WERE_PERFECT
@@ -286,21 +285,22 @@
int type = skb->h.icmph->type;
int code = skb->h.icmph->code;
struct ip_tunnel *t;
+ int err;
switch (type) {
default:
case ICMP_PARAMETERPROB:
- return;
+ return 0;
case ICMP_DEST_UNREACH:
switch (code) {
case ICMP_SR_FAILED:
case ICMP_PORT_UNREACH:
/* Impossible event. */
- return;
+ return 0;
case ICMP_FRAG_NEEDED:
/* Soft state for pmtu is maintained by IP core. */
- return;
+ return 0;
default:
/* All others are translated to HOST_UNREACH.
rfc2003 contains "deep thoughts" about NET_UNREACH,
@@ -311,14 +311,18 @@
break;
case ICMP_TIME_EXCEEDED:
if (code != ICMP_EXC_TTL)
- return;
+ return 0;
break;
}
+ err = -ENOENT;
+
read_lock(&ipip_lock);
t = ipip_tunnel_lookup(iph->daddr, iph->saddr);
if (t == NULL || t->parms.iph.daddr == 0)
goto out;
+
+ err = 0;
if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED)
goto out;
@@ -329,7 +333,7 @@
t->err_time = jiffies;
out:
read_unlock(&ipip_lock);
- return;
+ return err;
#else
struct iphdr *iph = (struct iphdr*)dp;
int hlen = iph->ihl<<2;
@@ -344,15 +348,15 @@
struct rtable *rt;
if (len < hlen + sizeof(struct iphdr))
- return;
+ return 0;
eiph = (struct iphdr*)(dp + hlen);
switch (type) {
default:
- return;
+ return 0;
case ICMP_PARAMETERPROB:
if (skb->h.icmph->un.gateway < hlen)
- return;
+ return 0;
/* So... This guy found something strange INSIDE encapsulated
packet. Well, he is fool, but what can we do ?
@@ -366,16 +370,16 @@
case ICMP_SR_FAILED:
case ICMP_PORT_UNREACH:
/* Impossible event. */
- return;
+ return 0;
case ICMP_FRAG_NEEDED:
/* And it is the only really necessary thing :-) */
rel_info = ntohs(skb->h.icmph->un.frag.mtu);
if (rel_info < hlen+68)
- return;
+ return 0;
rel_info -= hlen;
/* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
if (rel_info > ntohs(eiph->tot_len))
- return;
+ return 0;
break;
default:
/* All others are translated to HOST_UNREACH.
@@ -389,14 +393,14 @@
break;
case ICMP_TIME_EXCEEDED:
if (code != ICMP_EXC_TTL)
- return;
+ return 0;
break;
}
/* Prepare fake skb to feed it to icmp_send */
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2 == NULL)
- return;
+ return 0;
dst_release(skb2->dst);
skb2->dst = NULL;
skb_pull(skb2, skb->data - (u8*)eiph);
@@ -409,7 +413,7 @@
fl.proto = IPPROTO_IPIP;
if (ip_route_output_key(&rt, &key)) {
kfree_skb(skb2);
- return;
+ return 0;
}
skb2->dev = rt->u.dst.dev;
@@ -424,14 +428,14 @@
rt->u.dst.dev->type != ARPHRD_TUNNEL) {
ip_rt_put(rt);
kfree_skb(skb2);
- return;
+ return 0;
}
} else {
ip_rt_put(rt);
if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
skb2->dst->dev->type != ARPHRD_TUNNEL) {
kfree_skb(skb2);
- return;
+ return 0;
}
}
@@ -439,7 +443,7 @@
if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
if (rel_info > dst_mtu(skb2->dst)) {
kfree_skb(skb2);
- return;
+ return 0;
}
skb2->dst->ops->update_pmtu(skb2->dst, rel_info);
rel_info = htonl(rel_info);
@@ -453,7 +457,7 @@
icmp_send(skb2, rel_type, rel_code, rel_info);
kfree_skb(skb2);
- return;
+ return 0;
#endif
}
@@ -855,39 +859,12 @@
return 0;
}
-#ifdef CONFIG_INET_TUNNEL
static struct xfrm_tunnel ipip_handler = {
.handler = ipip_rcv,
.err_handler = ipip_err,
+ .priority = 1,
};
-static inline int ipip_register(void)
-{
- return xfrm4_tunnel_register(&ipip_handler);
-}
-
-static inline int ipip_unregister(void)
-{
- return xfrm4_tunnel_deregister(&ipip_handler);
-}
-#else
-static struct net_protocol ipip_protocol = {
- .handler = ipip_rcv,
- .err_handler = ipip_err,
- .no_policy = 1,
-};
-
-static inline int ipip_register(void)
-{
- return inet_add_protocol(&ipip_protocol, IPPROTO_IPIP);
-}
-
-static inline int ipip_unregister(void)
-{
- return inet_del_protocol(&ipip_protocol, IPPROTO_IPIP);
-}
-#endif
-
static char banner[] __initdata =
KERN_INFO "IPv4 over IPv4 tunneling driver\n";
@@ -897,7 +874,7 @@
printk(banner);
- if (ipip_register() < 0) {
+ if (xfrm4_tunnel_register(&ipip_handler)) {
printk(KERN_INFO "ipip init: can't register tunnel\n");
return -EAGAIN;
}
@@ -919,7 +896,7 @@
err2:
free_netdev(ipip_fb_tunnel_dev);
err1:
- ipip_unregister();
+ xfrm4_tunnel_deregister(&ipip_handler);
goto out;
}
@@ -939,7 +916,7 @@
static void __exit ipip_fini(void)
{
- if (ipip_unregister() < 0)
+ if (xfrm4_tunnel_deregister(&ipip_handler))
printk(KERN_INFO "ipip close: can't deregister tunnel\n");
rtnl_lock();
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index ed42cdc..b5ad9ac 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -167,15 +167,15 @@
.reroute = queue_reroute,
};
-static int init(void)
+static int ipv4_netfilter_init(void)
{
return nf_register_queue_rerouter(PF_INET, &ip_reroute);
}
-static void fini(void)
+static void ipv4_netfilter_fini(void)
{
nf_unregister_queue_rerouter(PF_INET);
}
-module_init(init);
-module_exit(fini);
+module_init(ipv4_netfilter_init);
+module_exit(ipv4_netfilter_fini);
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index ff0c594..a44a5d7 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -1166,7 +1166,7 @@
.get = do_arpt_get_ctl,
};
-static int __init init(void)
+static int __init arp_tables_init(void)
{
int ret;
@@ -1187,7 +1187,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit arp_tables_fini(void)
{
nf_unregister_sockopt(&arpt_sockopts);
xt_proto_fini(NF_ARP);
@@ -1197,5 +1197,5 @@
EXPORT_SYMBOL(arpt_unregister_table);
EXPORT_SYMBOL(arpt_do_table);
-module_init(init);
-module_exit(fini);
+module_init(arp_tables_init);
+module_exit(arp_tables_fini);
diff --git a/net/ipv4/netfilter/arpt_mangle.c b/net/ipv4/netfilter/arpt_mangle.c
index 0f2a953..a58325c 100644
--- a/net/ipv4/netfilter/arpt_mangle.c
+++ b/net/ipv4/netfilter/arpt_mangle.c
@@ -89,7 +89,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init arpt_mangle_init(void)
{
if (arpt_register_target(&arpt_mangle_reg))
return -EINVAL;
@@ -97,10 +97,10 @@
return 0;
}
-static void __exit fini(void)
+static void __exit arpt_mangle_fini(void)
{
arpt_unregister_target(&arpt_mangle_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(arpt_mangle_init);
+module_exit(arpt_mangle_fini);
diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c
index f6ab45f..d0d379c 100644
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -179,7 +179,7 @@
},
};
-static int __init init(void)
+static int __init arptable_filter_init(void)
{
int ret, i;
@@ -201,7 +201,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit arptable_filter_fini(void)
{
unsigned int i;
@@ -211,5 +211,5 @@
arpt_unregister_table(&packet_filter);
}
-module_init(init);
-module_exit(fini);
+module_init(arptable_filter_init);
+module_exit(arptable_filter_fini);
diff --git a/net/ipv4/netfilter/ip_conntrack_amanda.c b/net/ipv4/netfilter/ip_conntrack_amanda.c
index 84e4f79..a604b1c 100644
--- a/net/ipv4/netfilter/ip_conntrack_amanda.c
+++ b/net/ipv4/netfilter/ip_conntrack_amanda.c
@@ -153,13 +153,13 @@
},
};
-static void __exit fini(void)
+static void __exit ip_conntrack_amanda_fini(void)
{
ip_conntrack_helper_unregister(&amanda_helper);
kfree(amanda_buffer);
}
-static int __init init(void)
+static int __init ip_conntrack_amanda_init(void)
{
int ret;
@@ -177,5 +177,5 @@
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_amanda_init);
+module_exit(ip_conntrack_amanda_fini);
diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c
index e627e58..3e542bf 100644
--- a/net/ipv4/netfilter/ip_conntrack_ftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_ftp.c
@@ -453,7 +453,7 @@
static char ftp_names[MAX_PORTS][sizeof("ftp-65535")];
/* Not __exit: called from init() */
-static void fini(void)
+static void ip_conntrack_ftp_fini(void)
{
int i;
for (i = 0; i < ports_c; i++) {
@@ -465,7 +465,7 @@
kfree(ftp_buffer);
}
-static int __init init(void)
+static int __init ip_conntrack_ftp_init(void)
{
int i, ret;
char *tmpname;
@@ -499,12 +499,12 @@
ret = ip_conntrack_helper_register(&ftp[i]);
if (ret) {
- fini();
+ ip_conntrack_ftp_fini();
return ret;
}
}
return 0;
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_ftp_init);
+module_exit(ip_conntrack_ftp_fini);
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
index d716bba..7d3ba43 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
@@ -766,7 +766,7 @@
extern int __init ip_ct_proto_gre_init(void);
/* ip_conntrack_pptp initialization */
-static int __init init(void)
+static int __init ip_conntrack_helper_pptp_init(void)
{
int retcode;
@@ -786,15 +786,15 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ip_conntrack_helper_pptp_fini(void)
{
ip_conntrack_helper_unregister(&pptp);
ip_ct_proto_gre_fini();
printk("ip_conntrack_pptp version %s unloaded\n", IP_CT_PPTP_VERSION);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_helper_pptp_init);
+module_exit(ip_conntrack_helper_pptp_fini);
EXPORT_SYMBOL(ip_nat_pptp_hook_outbound);
EXPORT_SYMBOL(ip_nat_pptp_hook_inbound);
diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c
index c51a2cf..a2ac5ce 100644
--- a/net/ipv4/netfilter/ip_conntrack_irc.c
+++ b/net/ipv4/netfilter/ip_conntrack_irc.c
@@ -242,9 +242,9 @@
static struct ip_conntrack_helper irc_helpers[MAX_PORTS];
static char irc_names[MAX_PORTS][sizeof("irc-65535")];
-static void fini(void);
+static void ip_conntrack_irc_fini(void);
-static int __init init(void)
+static int __init ip_conntrack_irc_init(void)
{
int i, ret;
struct ip_conntrack_helper *hlpr;
@@ -288,7 +288,7 @@
if (ret) {
printk("ip_conntrack_irc: ERROR registering port %d\n",
ports[i]);
- fini();
+ ip_conntrack_irc_fini();
return -EBUSY;
}
}
@@ -297,7 +297,7 @@
/* This function is intentionally _NOT_ defined as __exit, because
* it is needed by the init function */
-static void fini(void)
+static void ip_conntrack_irc_fini(void)
{
int i;
for (i = 0; i < ports_c; i++) {
@@ -308,5 +308,5 @@
kfree(irc_buffer);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_irc_init);
+module_exit(ip_conntrack_irc_fini);
diff --git a/net/ipv4/netfilter/ip_conntrack_netbios_ns.c b/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
index 4e68e16..a566a81 100644
--- a/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
+++ b/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
@@ -127,16 +127,16 @@
.help = help,
};
-static int __init init(void)
+static int __init ip_conntrack_netbios_ns_init(void)
{
helper.timeout = timeout;
return ip_conntrack_helper_register(&helper);
}
-static void __exit fini(void)
+static void __exit ip_conntrack_netbios_ns_fini(void)
{
ip_conntrack_helper_unregister(&helper);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_netbios_ns_init);
+module_exit(ip_conntrack_netbios_ns_fini);
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
index be602e8..5259abd 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
@@ -609,7 +609,7 @@
static struct ctl_table_header *ip_ct_sysctl_header;
#endif
-static int __init init(void)
+static int __init ip_conntrack_proto_sctp_init(void)
{
int ret;
@@ -640,7 +640,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip_conntrack_proto_sctp_fini(void)
{
ip_conntrack_protocol_unregister(&ip_conntrack_protocol_sctp);
#ifdef CONFIG_SYSCTL
@@ -649,8 +649,8 @@
DEBUGP("SCTP conntrack module unloaded\n");
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_proto_sctp_init);
+module_exit(ip_conntrack_proto_sctp_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kiran Kumar Immidi");
diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c
index 833fcb4..5207602 100644
--- a/net/ipv4/netfilter/ip_conntrack_standalone.c
+++ b/net/ipv4/netfilter/ip_conntrack_standalone.c
@@ -929,18 +929,18 @@
ip_ct_iterate_cleanup(kill_proto, &proto->proto);
}
-static int __init init(void)
+static int __init ip_conntrack_standalone_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit ip_conntrack_standalone_fini(void)
{
init_or_cleanup(0);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_standalone_init);
+module_exit(ip_conntrack_standalone_fini);
/* Some modules need us, but don't depend directly on any symbol.
They should call this. */
diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c
index 4ba4463..7e33d3b 100644
--- a/net/ipv4/netfilter/ip_conntrack_tftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_tftp.c
@@ -103,7 +103,7 @@
static struct ip_conntrack_helper tftp[MAX_PORTS];
static char tftp_names[MAX_PORTS][sizeof("tftp-65535")];
-static void fini(void)
+static void ip_conntrack_tftp_fini(void)
{
int i;
@@ -114,7 +114,7 @@
}
}
-static int __init init(void)
+static int __init ip_conntrack_tftp_init(void)
{
int i, ret;
char *tmpname;
@@ -148,12 +148,12 @@
if (ret) {
printk("ERROR registering helper for port %d\n",
ports[i]);
- fini();
+ ip_conntrack_tftp_fini();
return(ret);
}
}
return(0);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_conntrack_tftp_init);
+module_exit(ip_conntrack_tftp_fini);
diff --git a/net/ipv4/netfilter/ip_nat_amanda.c b/net/ipv4/netfilter/ip_nat_amanda.c
index 706c807..3a88871 100644
--- a/net/ipv4/netfilter/ip_nat_amanda.c
+++ b/net/ipv4/netfilter/ip_nat_amanda.c
@@ -68,19 +68,19 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip_nat_amanda_fini(void)
{
ip_nat_amanda_hook = NULL;
/* Make sure noone calls it, meanwhile. */
synchronize_net();
}
-static int __init init(void)
+static int __init ip_nat_amanda_init(void)
{
BUG_ON(ip_nat_amanda_hook);
ip_nat_amanda_hook = help;
return 0;
}
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_amanda_init);
+module_exit(ip_nat_amanda_fini);
diff --git a/net/ipv4/netfilter/ip_nat_ftp.c b/net/ipv4/netfilter/ip_nat_ftp.c
index b8daab3..3328fc5 100644
--- a/net/ipv4/netfilter/ip_nat_ftp.c
+++ b/net/ipv4/netfilter/ip_nat_ftp.c
@@ -154,14 +154,14 @@
return NF_ACCEPT;
}
-static void __exit fini(void)
+static void __exit ip_nat_ftp_fini(void)
{
ip_nat_ftp_hook = NULL;
/* Make sure noone calls it, meanwhile. */
synchronize_net();
}
-static int __init init(void)
+static int __init ip_nat_ftp_init(void)
{
BUG_ON(ip_nat_ftp_hook);
ip_nat_ftp_hook = ip_nat_ftp;
@@ -177,5 +177,5 @@
}
module_param_call(ports, warn_set, NULL, NULL, 0);
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_ftp_init);
+module_exit(ip_nat_ftp_fini);
diff --git a/net/ipv4/netfilter/ip_nat_helper_pptp.c b/net/ipv4/netfilter/ip_nat_helper_pptp.c
index b9c016c..f397772 100644
--- a/net/ipv4/netfilter/ip_nat_helper_pptp.c
+++ b/net/ipv4/netfilter/ip_nat_helper_pptp.c
@@ -370,7 +370,7 @@
extern int __init ip_nat_proto_gre_init(void);
extern void __exit ip_nat_proto_gre_fini(void);
-static int __init init(void)
+static int __init ip_nat_helper_pptp_init(void)
{
int ret;
@@ -396,7 +396,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ip_nat_helper_pptp_fini(void)
{
DEBUGP("cleanup_module\n" );
@@ -412,5 +412,5 @@
printk("ip_nat_pptp version %s unloaded\n", IP_NAT_PPTP_VERSION);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_helper_pptp_init);
+module_exit(ip_nat_helper_pptp_fini);
diff --git a/net/ipv4/netfilter/ip_nat_irc.c b/net/ipv4/netfilter/ip_nat_irc.c
index 461c833..a767123 100644
--- a/net/ipv4/netfilter/ip_nat_irc.c
+++ b/net/ipv4/netfilter/ip_nat_irc.c
@@ -96,14 +96,14 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip_nat_irc_fini(void)
{
ip_nat_irc_hook = NULL;
/* Make sure noone calls it, meanwhile. */
synchronize_net();
}
-static int __init init(void)
+static int __init ip_nat_irc_init(void)
{
BUG_ON(ip_nat_irc_hook);
ip_nat_irc_hook = help;
@@ -119,5 +119,5 @@
}
module_param_call(ports, warn_set, NULL, NULL, 0);
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_irc_init);
+module_exit(ip_nat_irc_fini);
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index f029da2..c622538 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -1324,7 +1324,7 @@
*
*****************************************************************************/
-static int __init init(void)
+static int __init ip_nat_snmp_basic_init(void)
{
int ret = 0;
@@ -1339,13 +1339,13 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip_nat_snmp_basic_fini(void)
{
ip_conntrack_helper_unregister(&snmp_helper);
ip_conntrack_helper_unregister(&snmp_trap_helper);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_snmp_basic_init);
+module_exit(ip_nat_snmp_basic_fini);
module_param(debug, bool, 0600);
diff --git a/net/ipv4/netfilter/ip_nat_standalone.c b/net/ipv4/netfilter/ip_nat_standalone.c
index 380aef3..3505b0d 100644
--- a/net/ipv4/netfilter/ip_nat_standalone.c
+++ b/net/ipv4/netfilter/ip_nat_standalone.c
@@ -425,17 +425,17 @@
return ret;
}
-static int __init init(void)
+static int __init ip_nat_standalone_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit ip_nat_standalone_fini(void)
{
init_or_cleanup(0);
}
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_standalone_init);
+module_exit(ip_nat_standalone_fini);
MODULE_LICENSE("GPL");
diff --git a/net/ipv4/netfilter/ip_nat_tftp.c b/net/ipv4/netfilter/ip_nat_tftp.c
index 43c3bd7..94a7801 100644
--- a/net/ipv4/netfilter/ip_nat_tftp.c
+++ b/net/ipv4/netfilter/ip_nat_tftp.c
@@ -53,19 +53,19 @@
return NF_ACCEPT;
}
-static void __exit fini(void)
+static void __exit ip_nat_tftp_fini(void)
{
ip_nat_tftp_hook = NULL;
/* Make sure noone calls it, meanwhile. */
synchronize_net();
}
-static int __init init(void)
+static int __init ip_nat_tftp_init(void)
{
BUG_ON(ip_nat_tftp_hook);
ip_nat_tftp_hook = help;
return 0;
}
-module_init(init);
-module_exit(fini);
+module_init(ip_nat_tftp_init);
+module_exit(ip_nat_tftp_fini);
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 1655866..896a244 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -717,13 +717,13 @@
return status;
}
-static int __init init(void)
+static int __init ip_queue_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit ip_queue_fini(void)
{
init_or_cleanup(0);
}
@@ -732,5 +732,5 @@
MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
MODULE_LICENSE("GPL");
-module_init(init);
-module_exit(fini);
+module_init(ip_queue_init);
+module_exit(ip_queue_fini);
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index a7b194c..460fd90 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1364,7 +1364,7 @@
.checkentry = icmp_checkentry,
};
-static int __init init(void)
+static int __init ip_tables_init(void)
{
int ret;
@@ -1386,7 +1386,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ip_tables_fini(void)
{
nf_unregister_sockopt(&ipt_sockopts);
@@ -1400,5 +1400,5 @@
EXPORT_SYMBOL(ipt_register_table);
EXPORT_SYMBOL(ipt_unregister_table);
EXPORT_SYMBOL(ipt_do_table);
-module_init(init);
-module_exit(fini);
+module_init(ip_tables_init);
+module_exit(ip_tables_fini);
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 61e11ed..e4768a3 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -770,15 +770,15 @@
return -EINVAL;
}
-static int __init init(void)
+static int __init ipt_clusterip_init(void)
{
return init_or_cleanup(0);
}
-static void __exit fini(void)
+static void __exit ipt_clusterip_fini(void)
{
init_or_cleanup(1);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_clusterip_init);
+module_exit(ipt_clusterip_fini);
diff --git a/net/ipv4/netfilter/ipt_DSCP.c b/net/ipv4/netfilter/ipt_DSCP.c
index cfb0b90..c8e9712 100644
--- a/net/ipv4/netfilter/ipt_DSCP.c
+++ b/net/ipv4/netfilter/ipt_DSCP.c
@@ -82,15 +82,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_dscp_init(void)
{
return ipt_register_target(&ipt_dscp_reg);
}
-static void __exit fini(void)
+static void __exit ipt_dscp_fini(void)
{
ipt_unregister_target(&ipt_dscp_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_dscp_init);
+module_exit(ipt_dscp_fini);
diff --git a/net/ipv4/netfilter/ipt_ECN.c b/net/ipv4/netfilter/ipt_ECN.c
index b9b80f9..4adf5c9 100644
--- a/net/ipv4/netfilter/ipt_ECN.c
+++ b/net/ipv4/netfilter/ipt_ECN.c
@@ -151,15 +151,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ecn_init(void)
{
return ipt_register_target(&ipt_ecn_reg);
}
-static void __exit fini(void)
+static void __exit ipt_ecn_fini(void)
{
ipt_unregister_target(&ipt_ecn_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_ecn_init);
+module_exit(ipt_ecn_fini);
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index 750d322..39fd4c2 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -471,7 +471,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_log_init(void)
{
if (ipt_register_target(&ipt_log_reg))
return -EINVAL;
@@ -485,11 +485,11 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ipt_log_fini(void)
{
nf_log_unregister_logger(&ipt_log_logger);
ipt_unregister_target(&ipt_log_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_log_init);
+module_exit(ipt_log_fini);
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index e0c321c..8b3e7f9 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -175,7 +175,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_masquerade_init(void)
{
int ret;
@@ -191,12 +191,12 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ipt_masquerade_fini(void)
{
ipt_unregister_target(&masquerade);
unregister_netdevice_notifier(&masq_dev_notifier);
unregister_inetaddr_notifier(&masq_inet_notifier);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_masquerade_init);
+module_exit(ipt_masquerade_fini);
diff --git a/net/ipv4/netfilter/ipt_NETMAP.c b/net/ipv4/netfilter/ipt_NETMAP.c
index fba181c..2fcf107 100644
--- a/net/ipv4/netfilter/ipt_NETMAP.c
+++ b/net/ipv4/netfilter/ipt_NETMAP.c
@@ -98,15 +98,15 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init ipt_netmap_init(void)
{
return ipt_register_target(&target_module);
}
-static void __exit fini(void)
+static void __exit ipt_netmap_fini(void)
{
ipt_unregister_target(&target_module);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_netmap_init);
+module_exit(ipt_netmap_fini);
diff --git a/net/ipv4/netfilter/ipt_REDIRECT.c b/net/ipv4/netfilter/ipt_REDIRECT.c
index be3da7c..f290463 100644
--- a/net/ipv4/netfilter/ipt_REDIRECT.c
+++ b/net/ipv4/netfilter/ipt_REDIRECT.c
@@ -112,15 +112,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_redirect_init(void)
{
return ipt_register_target(&redirect_reg);
}
-static void __exit fini(void)
+static void __exit ipt_redirect_fini(void)
{
ipt_unregister_target(&redirect_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_redirect_init);
+module_exit(ipt_redirect_fini);
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index 9d3b357..4269a54 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -313,15 +313,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_reject_init(void)
{
return ipt_register_target(&ipt_reject_reg);
}
-static void __exit fini(void)
+static void __exit ipt_reject_fini(void)
{
ipt_unregister_target(&ipt_reject_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_reject_init);
+module_exit(ipt_reject_fini);
diff --git a/net/ipv4/netfilter/ipt_SAME.c b/net/ipv4/netfilter/ipt_SAME.c
index 7e2ebc9..7169b09 100644
--- a/net/ipv4/netfilter/ipt_SAME.c
+++ b/net/ipv4/netfilter/ipt_SAME.c
@@ -189,16 +189,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_same_init(void)
{
return ipt_register_target(&same_reg);
}
-static void __exit fini(void)
+static void __exit ipt_same_fini(void)
{
ipt_unregister_target(&same_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_same_init);
+module_exit(ipt_same_fini);
diff --git a/net/ipv4/netfilter/ipt_TCPMSS.c b/net/ipv4/netfilter/ipt_TCPMSS.c
index c4fc50e..ef2fe5b 100644
--- a/net/ipv4/netfilter/ipt_TCPMSS.c
+++ b/net/ipv4/netfilter/ipt_TCPMSS.c
@@ -243,15 +243,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_tcpmss_init(void)
{
return ipt_register_target(&ipt_tcpmss_reg);
}
-static void __exit fini(void)
+static void __exit ipt_tcpmss_fini(void)
{
ipt_unregister_target(&ipt_tcpmss_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_tcpmss_init);
+module_exit(ipt_tcpmss_fini);
diff --git a/net/ipv4/netfilter/ipt_TOS.c b/net/ipv4/netfilter/ipt_TOS.c
index 9aa7817..1c7a5ca 100644
--- a/net/ipv4/netfilter/ipt_TOS.c
+++ b/net/ipv4/netfilter/ipt_TOS.c
@@ -81,15 +81,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_tos_init(void)
{
return ipt_register_target(&ipt_tos_reg);
}
-static void __exit fini(void)
+static void __exit ipt_tos_fini(void)
{
ipt_unregister_target(&ipt_tos_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_tos_init);
+module_exit(ipt_tos_fini);
diff --git a/net/ipv4/netfilter/ipt_TTL.c b/net/ipv4/netfilter/ipt_TTL.c
index 5009a00..f48892a 100644
--- a/net/ipv4/netfilter/ipt_TTL.c
+++ b/net/ipv4/netfilter/ipt_TTL.c
@@ -94,15 +94,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ttl_init(void)
{
return ipt_register_target(&ipt_TTL);
}
-static void __exit fini(void)
+static void __exit ipt_ttl_fini(void)
{
ipt_unregister_target(&ipt_TTL);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_ttl_init);
+module_exit(ipt_ttl_fini);
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index a82a32e..c84cc03 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -374,7 +374,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ulog_init(void)
{
int i;
@@ -407,7 +407,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ipt_ulog_fini(void)
{
ulog_buff_t *ub;
int i;
@@ -435,5 +435,5 @@
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_ulog_init);
+module_exit(ipt_ulog_fini);
diff --git a/net/ipv4/netfilter/ipt_addrtype.c b/net/ipv4/netfilter/ipt_addrtype.c
index 5fdf85d..893dae2 100644
--- a/net/ipv4/netfilter/ipt_addrtype.c
+++ b/net/ipv4/netfilter/ipt_addrtype.c
@@ -51,15 +51,15 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init ipt_addrtype_init(void)
{
return ipt_register_match(&addrtype_match);
}
-static void __exit fini(void)
+static void __exit ipt_addrtype_fini(void)
{
ipt_unregister_match(&addrtype_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_addrtype_init);
+module_exit(ipt_addrtype_fini);
diff --git a/net/ipv4/netfilter/ipt_ah.c b/net/ipv4/netfilter/ipt_ah.c
index 35a21fb..2927135 100644
--- a/net/ipv4/netfilter/ipt_ah.c
+++ b/net/ipv4/netfilter/ipt_ah.c
@@ -96,15 +96,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ah_init(void)
{
return ipt_register_match(&ah_match);
}
-static void __exit cleanup(void)
+static void __exit ipt_ah_fini(void)
{
ipt_unregister_match(&ah_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ipt_ah_init);
+module_exit(ipt_ah_fini);
diff --git a/net/ipv4/netfilter/ipt_dscp.c b/net/ipv4/netfilter/ipt_dscp.c
index 11963c3..4717759 100644
--- a/net/ipv4/netfilter/ipt_dscp.c
+++ b/net/ipv4/netfilter/ipt_dscp.c
@@ -39,16 +39,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_dscp_init(void)
{
return ipt_register_match(&dscp_match);
}
-static void __exit fini(void)
+static void __exit ipt_dscp_fini(void)
{
ipt_unregister_match(&dscp_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_dscp_init);
+module_exit(ipt_dscp_fini);
diff --git a/net/ipv4/netfilter/ipt_ecn.c b/net/ipv4/netfilter/ipt_ecn.c
index d7e29f6..b282504 100644
--- a/net/ipv4/netfilter/ipt_ecn.c
+++ b/net/ipv4/netfilter/ipt_ecn.c
@@ -118,15 +118,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ecn_init(void)
{
return ipt_register_match(&ecn_match);
}
-static void __exit fini(void)
+static void __exit ipt_ecn_fini(void)
{
ipt_unregister_match(&ecn_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_ecn_init);
+module_exit(ipt_ecn_fini);
diff --git a/net/ipv4/netfilter/ipt_esp.c b/net/ipv4/netfilter/ipt_esp.c
index af0d5ec..3840b41 100644
--- a/net/ipv4/netfilter/ipt_esp.c
+++ b/net/ipv4/netfilter/ipt_esp.c
@@ -97,15 +97,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_esp_init(void)
{
return ipt_register_match(&esp_match);
}
-static void __exit cleanup(void)
+static void __exit ipt_esp_fini(void)
{
ipt_unregister_match(&esp_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ipt_esp_init);
+module_exit(ipt_esp_fini);
diff --git a/net/ipv4/netfilter/ipt_hashlimit.c b/net/ipv4/netfilter/ipt_hashlimit.c
index ba5e235..7c6836c 100644
--- a/net/ipv4/netfilter/ipt_hashlimit.c
+++ b/net/ipv4/netfilter/ipt_hashlimit.c
@@ -719,15 +719,15 @@
}
-static int __init init(void)
+static int __init ipt_hashlimit_init(void)
{
return init_or_fini(0);
}
-static void __exit fini(void)
+static void __exit ipt_hashlimit_fini(void)
{
init_or_fini(1);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_hashlimit_init);
+module_exit(ipt_hashlimit_fini);
diff --git a/net/ipv4/netfilter/ipt_iprange.c b/net/ipv4/netfilter/ipt_iprange.c
index ae70112..5202edd 100644
--- a/net/ipv4/netfilter/ipt_iprange.c
+++ b/net/ipv4/netfilter/ipt_iprange.c
@@ -71,15 +71,15 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init ipt_iprange_init(void)
{
return ipt_register_match(&iprange_match);
}
-static void __exit fini(void)
+static void __exit ipt_iprange_fini(void)
{
ipt_unregister_match(&iprange_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_iprange_init);
+module_exit(ipt_iprange_fini);
diff --git a/net/ipv4/netfilter/ipt_multiport.c b/net/ipv4/netfilter/ipt_multiport.c
index bd07f7c..ac95d83 100644
--- a/net/ipv4/netfilter/ipt_multiport.c
+++ b/net/ipv4/netfilter/ipt_multiport.c
@@ -171,7 +171,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_multiport_init(void)
{
int err;
@@ -185,11 +185,11 @@
return err;
}
-static void __exit fini(void)
+static void __exit ipt_multiport_fini(void)
{
ipt_unregister_match(&multiport_match);
ipt_unregister_match(&multiport_match_v1);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_multiport_init);
+module_exit(ipt_multiport_fini);
diff --git a/net/ipv4/netfilter/ipt_owner.c b/net/ipv4/netfilter/ipt_owner.c
index 3900428..5ac6ac0 100644
--- a/net/ipv4/netfilter/ipt_owner.c
+++ b/net/ipv4/netfilter/ipt_owner.c
@@ -78,15 +78,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_owner_init(void)
{
return ipt_register_match(&owner_match);
}
-static void __exit fini(void)
+static void __exit ipt_owner_fini(void)
{
ipt_unregister_match(&owner_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_owner_init);
+module_exit(ipt_owner_fini);
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 06792ea..1438432 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -962,7 +962,7 @@
};
/* Kernel module initialization. */
-static int __init init(void)
+static int __init ipt_recent_init(void)
{
int err, count;
@@ -995,7 +995,7 @@
}
/* Kernel module destruction. */
-static void __exit fini(void)
+static void __exit ipt_recent_fini(void)
{
ipt_unregister_match(&recent_match);
@@ -1003,5 +1003,5 @@
}
/* Register our module with the kernel. */
-module_init(init);
-module_exit(fini);
+module_init(ipt_recent_init);
+module_exit(ipt_recent_fini);
diff --git a/net/ipv4/netfilter/ipt_tos.c b/net/ipv4/netfilter/ipt_tos.c
index e404e92d..5549c39 100644
--- a/net/ipv4/netfilter/ipt_tos.c
+++ b/net/ipv4/netfilter/ipt_tos.c
@@ -39,15 +39,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_multiport_init(void)
{
return ipt_register_match(&tos_match);
}
-static void __exit fini(void)
+static void __exit ipt_multiport_fini(void)
{
ipt_unregister_match(&tos_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_multiport_init);
+module_exit(ipt_multiport_fini);
diff --git a/net/ipv4/netfilter/ipt_ttl.c b/net/ipv4/netfilter/ipt_ttl.c
index ae7ce4d..a5243bd 100644
--- a/net/ipv4/netfilter/ipt_ttl.c
+++ b/net/ipv4/netfilter/ipt_ttl.c
@@ -55,16 +55,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ipt_ttl_init(void)
{
return ipt_register_match(&ttl_match);
}
-static void __exit fini(void)
+static void __exit ipt_ttl_fini(void)
{
ipt_unregister_match(&ttl_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ipt_ttl_init);
+module_exit(ipt_ttl_fini);
diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c
index 212a307..3d80aef 100644
--- a/net/ipv4/netfilter/iptable_filter.c
+++ b/net/ipv4/netfilter/iptable_filter.c
@@ -139,7 +139,7 @@
static int forward = NF_ACCEPT;
module_param(forward, bool, 0000);
-static int __init init(void)
+static int __init iptable_filter_init(void)
{
int ret;
@@ -181,7 +181,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit iptable_filter_fini(void)
{
unsigned int i;
@@ -191,5 +191,5 @@
ipt_unregister_table(&packet_filter);
}
-module_init(init);
-module_exit(fini);
+module_init(iptable_filter_init);
+module_exit(iptable_filter_fini);
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 3212a5c..412fc96 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -201,7 +201,7 @@
},
};
-static int __init init(void)
+static int __init iptable_mangle_init(void)
{
int ret;
@@ -247,7 +247,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit iptable_mangle_fini(void)
{
unsigned int i;
@@ -257,5 +257,5 @@
ipt_unregister_table(&packet_mangler);
}
-module_init(init);
-module_exit(fini);
+module_init(iptable_mangle_init);
+module_exit(iptable_mangle_fini);
diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c
index fdb9e9c..03cc79a 100644
--- a/net/ipv4/netfilter/iptable_raw.c
+++ b/net/ipv4/netfilter/iptable_raw.c
@@ -116,7 +116,7 @@
},
};
-static int __init init(void)
+static int __init iptable_raw_init(void)
{
int ret;
@@ -144,7 +144,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit iptable_raw_fini(void)
{
unsigned int i;
@@ -154,6 +154,6 @@
ipt_unregister_table(&packet_raw);
}
-module_init(init);
-module_exit(fini);
+module_init(iptable_raw_init);
+module_exit(iptable_raw_fini);
MODULE_LICENSE("GPL");
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index c8abc9d..4afbc69 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -571,18 +571,18 @@
MODULE_ALIAS("nf_conntrack-" __stringify(AF_INET));
MODULE_LICENSE("GPL");
-static int __init init(void)
+static int __init nf_conntrack_l3proto_ipv4_init(void)
{
need_conntrack();
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit nf_conntrack_l3proto_ipv4_fini(void)
{
init_or_cleanup(0);
}
-module_init(init);
-module_exit(fini);
+module_init(nf_conntrack_l3proto_ipv4_init);
+module_exit(nf_conntrack_l3proto_ipv4_fini);
EXPORT_SYMBOL(nf_ct_ipv4_gather_frags);
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index e688c68..91c2f41 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -223,7 +223,7 @@
/* In dangerous area, increase slowly. */
else if (sysctl_tcp_abc) {
- /* RFC3465: Apppriate Byte Count
+ /* RFC3465: Appropriate Byte Count
* increase once for each full cwnd acked
*/
if (tp->bytes_acked >= tp->snd_cwnd*tp->mss_cache) {
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
new file mode 100644
index 0000000..0d7d386
--- /dev/null
+++ b/net/ipv4/tunnel4.c
@@ -0,0 +1,113 @@
+/* tunnel4.c: Generic IP tunnel transformer.
+ *
+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/protocol.h>
+#include <net/xfrm.h>
+
+static struct xfrm_tunnel *tunnel4_handlers;
+static DEFINE_MUTEX(tunnel4_mutex);
+
+int xfrm4_tunnel_register(struct xfrm_tunnel *handler)
+{
+ struct xfrm_tunnel **pprev;
+ int ret = -EEXIST;
+ int priority = handler->priority;
+
+ mutex_lock(&tunnel4_mutex);
+
+ for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) {
+ if ((*pprev)->priority > priority)
+ break;
+ if ((*pprev)->priority == priority)
+ goto err;
+ }
+
+ handler->next = *pprev;
+ *pprev = handler;
+
+ ret = 0;
+
+err:
+ mutex_unlock(&tunnel4_mutex);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(xfrm4_tunnel_register);
+
+int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler)
+{
+ struct xfrm_tunnel **pprev;
+ int ret = -ENOENT;
+
+ mutex_lock(&tunnel4_mutex);
+
+ for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) {
+ if (*pprev == handler) {
+ *pprev = handler->next;
+ ret = 0;
+ break;
+ }
+ }
+
+ mutex_unlock(&tunnel4_mutex);
+
+ synchronize_net();
+
+ return ret;
+}
+
+EXPORT_SYMBOL(xfrm4_tunnel_deregister);
+
+static int tunnel4_rcv(struct sk_buff *skb)
+{
+ struct xfrm_tunnel *handler;
+
+ for (handler = tunnel4_handlers; handler; handler = handler->next)
+ if (!handler->handler(skb))
+ return 0;
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static void tunnel4_err(struct sk_buff *skb, u32 info)
+{
+ struct xfrm_tunnel *handler;
+
+ for (handler = tunnel4_handlers; handler; handler = handler->next)
+ if (!handler->err_handler(skb, info))
+ break;
+}
+
+static struct net_protocol tunnel4_protocol = {
+ .handler = tunnel4_rcv,
+ .err_handler = tunnel4_err,
+ .no_policy = 1,
+};
+
+static int __init tunnel4_init(void)
+{
+ if (inet_add_protocol(&tunnel4_protocol, IPPROTO_IPIP)) {
+ printk(KERN_ERR "tunnel4 init: can't add protocol\n");
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static void __exit tunnel4_fini(void)
+{
+ if (inet_del_protocol(&tunnel4_protocol, IPPROTO_IPIP))
+ printk(KERN_ERR "tunnel4 close: can't remove protocol\n");
+}
+
+module_init(tunnel4_init);
+module_exit(tunnel4_fini);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv4/xfrm4_tunnel.c b/net/ipv4/xfrm4_tunnel.c
index b08d56b..2d67093 100644
--- a/net/ipv4/xfrm4_tunnel.c
+++ b/net/ipv4/xfrm4_tunnel.c
@@ -26,64 +26,6 @@
return 0;
}
-static struct xfrm_tunnel *ipip_handler;
-static DEFINE_MUTEX(xfrm4_tunnel_mutex);
-
-int xfrm4_tunnel_register(struct xfrm_tunnel *handler)
-{
- int ret;
-
- mutex_lock(&xfrm4_tunnel_mutex);
- ret = 0;
- if (ipip_handler != NULL)
- ret = -EINVAL;
- if (!ret)
- ipip_handler = handler;
- mutex_unlock(&xfrm4_tunnel_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(xfrm4_tunnel_register);
-
-int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler)
-{
- int ret;
-
- mutex_lock(&xfrm4_tunnel_mutex);
- ret = 0;
- if (ipip_handler != handler)
- ret = -EINVAL;
- if (!ret)
- ipip_handler = NULL;
- mutex_unlock(&xfrm4_tunnel_mutex);
-
- synchronize_net();
-
- return ret;
-}
-
-EXPORT_SYMBOL(xfrm4_tunnel_deregister);
-
-static int ipip_rcv(struct sk_buff *skb)
-{
- struct xfrm_tunnel *handler = ipip_handler;
-
- /* Tunnel devices take precedence. */
- if (handler && handler->handler(skb) == 0)
- return 0;
-
- return xfrm4_rcv(skb);
-}
-
-static void ipip_err(struct sk_buff *skb, u32 info)
-{
- struct xfrm_tunnel *handler = ipip_handler;
-
- if (handler)
- handler->err_handler(skb, info);
-}
-
static int ipip_init_state(struct xfrm_state *x)
{
if (!x->props.mode)
@@ -111,10 +53,15 @@
.output = ipip_output
};
-static struct net_protocol ipip_protocol = {
- .handler = ipip_rcv,
- .err_handler = ipip_err,
- .no_policy = 1,
+static int xfrm_tunnel_err(struct sk_buff *skb, u32 info)
+{
+ return -ENOENT;
+}
+
+static struct xfrm_tunnel xfrm_tunnel_handler = {
+ .handler = xfrm4_rcv,
+ .err_handler = xfrm_tunnel_err,
+ .priority = 2,
};
static int __init ipip_init(void)
@@ -123,8 +70,8 @@
printk(KERN_INFO "ipip init: can't add xfrm type\n");
return -EAGAIN;
}
- if (inet_add_protocol(&ipip_protocol, IPPROTO_IPIP) < 0) {
- printk(KERN_INFO "ipip init: can't add protocol\n");
+ if (xfrm4_tunnel_register(&xfrm_tunnel_handler)) {
+ printk(KERN_INFO "ipip init: can't add xfrm handler\n");
xfrm_unregister_type(&ipip_type, AF_INET);
return -EAGAIN;
}
@@ -133,8 +80,8 @@
static void __exit ipip_fini(void)
{
- if (inet_del_protocol(&ipip_protocol, IPPROTO_IPIP) < 0)
- printk(KERN_INFO "ipip close: can't remove protocol\n");
+ if (xfrm4_tunnel_deregister(&xfrm_tunnel_handler))
+ printk(KERN_INFO "ipip close: can't remove xfrm handler\n");
if (xfrm_unregister_type(&ipip_type, AF_INET) < 0)
printk(KERN_INFO "ipip close: can't remove xfrm type\n");
}
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index e6f83b6..f8a107a 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -88,7 +88,7 @@
tristate "IPv6: IPComp transformation"
depends on IPV6
select XFRM
- select INET6_TUNNEL
+ select INET6_XFRM_TUNNEL
select CRYPTO
select CRYPTO_DEFLATE
---help---
@@ -97,19 +97,18 @@
If unsure, say Y.
+config INET6_XFRM_TUNNEL
+ tristate
+ select INET6_TUNNEL
+ default n
+
config INET6_TUNNEL
- tristate "IPv6: tunnel transformation"
- depends on IPV6
- select XFRM
- ---help---
- Support for generic IPv6-in-IPv6 tunnel transformation, which is
- required by the IPv6-in-IPv6 tunneling module as well as tunnel mode
- IPComp.
-
- If unsure, say Y.
+ tristate
+ default n
config IPV6_TUNNEL
tristate "IPv6: IPv6-in-IPv6 tunnel"
+ select INET6_TUNNEL
depends on IPV6
---help---
Support for IPv6-in-IPv6 tunnels described in RFC 2473.
diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile
index 41877ab..a760b09 100644
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
@@ -18,7 +18,8 @@
obj-$(CONFIG_INET6_AH) += ah6.o
obj-$(CONFIG_INET6_ESP) += esp6.o
obj-$(CONFIG_INET6_IPCOMP) += ipcomp6.o
-obj-$(CONFIG_INET6_TUNNEL) += xfrm6_tunnel.o
+obj-$(CONFIG_INET6_XFRM_TUNNEL) += xfrm6_tunnel.o
+obj-$(CONFIG_INET6_TUNNEL) += tunnel6.o
obj-$(CONFIG_NETFILTER) += netfilter/
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 4859753..ff9040c 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -44,7 +44,6 @@
#include <net/ip.h>
#include <net/ipv6.h>
-#include <net/protocol.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
#include <net/ip6_tunnel.h>
@@ -391,7 +390,7 @@
* to the specifications in RFC 2473.
**/
-static void
+static int
ip6ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
int type, int code, int offset, __u32 info)
{
@@ -402,6 +401,7 @@
int rel_code = ICMPV6_ADDR_UNREACH;
__u32 rel_info = 0;
__u16 len;
+ int err = -ENOENT;
/* If the packet doesn't contain the original IPv6 header we are
in trouble since we might need the source address for further
@@ -411,6 +411,8 @@
if ((t = ip6ip6_tnl_lookup(&ipv6h->daddr, &ipv6h->saddr)) == NULL)
goto out;
+ err = 0;
+
switch (type) {
__u32 teli;
struct ipv6_tlv_tnl_enc_lim *tel;
@@ -492,6 +494,7 @@
}
out:
read_unlock(&ip6ip6_lock);
+ return err;
}
static inline void ip6ip6_ecn_decapsulate(struct ipv6hdr *outer_iph,
@@ -511,9 +514,8 @@
**/
static int
-ip6ip6_rcv(struct sk_buff **pskb)
+ip6ip6_rcv(struct sk_buff *skb)
{
- struct sk_buff *skb = *pskb;
struct ipv6hdr *ipv6h;
struct ip6_tnl *t;
@@ -1112,39 +1114,12 @@
return 0;
}
-#ifdef CONFIG_INET6_TUNNEL
static struct xfrm6_tunnel ip6ip6_handler = {
.handler = ip6ip6_rcv,
.err_handler = ip6ip6_err,
+ .priority = 1,
};
-static inline int ip6ip6_register(void)
-{
- return xfrm6_tunnel_register(&ip6ip6_handler);
-}
-
-static inline int ip6ip6_unregister(void)
-{
- return xfrm6_tunnel_deregister(&ip6ip6_handler);
-}
-#else
-static struct inet6_protocol xfrm6_tunnel_protocol = {
- .handler = ip6ip6_rcv,
- .err_handler = ip6ip6_err,
- .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
-};
-
-static inline int ip6ip6_register(void)
-{
- return inet6_add_protocol(&xfrm6_tunnel_protocol, IPPROTO_IPV6);
-}
-
-static inline int ip6ip6_unregister(void)
-{
- return inet6_del_protocol(&xfrm6_tunnel_protocol, IPPROTO_IPV6);
-}
-#endif
-
/**
* ip6_tunnel_init - register protocol and reserve needed resources
*
@@ -1155,7 +1130,7 @@
{
int err;
- if (ip6ip6_register() < 0) {
+ if (xfrm6_tunnel_register(&ip6ip6_handler)) {
printk(KERN_ERR "ip6ip6 init: can't register tunnel\n");
return -EAGAIN;
}
@@ -1174,7 +1149,7 @@
}
return 0;
fail:
- ip6ip6_unregister();
+ xfrm6_tunnel_deregister(&ip6ip6_handler);
return err;
}
@@ -1184,7 +1159,7 @@
static void __exit ip6_tunnel_cleanup(void)
{
- if (ip6ip6_unregister() < 0)
+ if (xfrm6_tunnel_deregister(&ip6ip6_handler))
printk(KERN_INFO "ip6ip6 close: can't deregister tunnel\n");
unregister_netdev(ip6ip6_fb_tnl_dev);
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 344eab3..e81c6a9 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -713,13 +713,13 @@
return status;
}
-static int __init init(void)
+static int __init ip6_queue_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit ip6_queue_fini(void)
{
init_or_cleanup(0);
}
@@ -727,5 +727,5 @@
MODULE_DESCRIPTION("IPv6 packet queue handler");
MODULE_LICENSE("GPL");
-module_init(init);
-module_exit(fini);
+module_init(ip6_queue_init);
+module_exit(ip6_queue_fini);
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index db3c9ae..3ecf2db 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1406,7 +1406,7 @@
.family = AF_INET6,
};
-static int __init init(void)
+static int __init ip6_tables_init(void)
{
int ret;
@@ -1429,7 +1429,7 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ip6_tables_fini(void)
{
nf_unregister_sockopt(&ip6t_sockopts);
xt_unregister_match(&icmp6_matchstruct);
@@ -1517,5 +1517,5 @@
EXPORT_SYMBOL(ip6t_ext_hdr);
EXPORT_SYMBOL(ipv6_find_hdr);
-module_init(init);
-module_exit(fini);
+module_init(ip6_tables_init);
+module_exit(ip6_tables_fini);
diff --git a/net/ipv6/netfilter/ip6t_HL.c b/net/ipv6/netfilter/ip6t_HL.c
index da14c6d..b8eff8e 100644
--- a/net/ipv6/netfilter/ip6t_HL.c
+++ b/net/ipv6/netfilter/ip6t_HL.c
@@ -93,15 +93,15 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init ip6t_hl_init(void)
{
return ip6t_register_target(&ip6t_HL);
}
-static void __exit fini(void)
+static void __exit ip6t_hl_fini(void)
{
ip6t_unregister_target(&ip6t_HL);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_hl_init);
+module_exit(ip6t_hl_fini);
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index 07c6bcb..a96c0de 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -483,7 +483,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_log_init(void)
{
if (ip6t_register_target(&ip6t_log_reg))
return -EINVAL;
@@ -497,11 +497,11 @@
return 0;
}
-static void __exit fini(void)
+static void __exit ip6t_log_fini(void)
{
nf_log_unregister_logger(&ip6t_logger);
ip6t_unregister_target(&ip6t_log_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_log_init);
+module_exit(ip6t_log_fini);
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index ddfa385..de1175c 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -255,17 +255,17 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init ip6t_reject_init(void)
{
if (ip6t_register_target(&ip6t_reject_reg))
return -EINVAL;
return 0;
}
-static void __exit fini(void)
+static void __exit ip6t_reject_fini(void)
{
ip6t_unregister_target(&ip6t_reject_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_reject_init);
+module_exit(ip6t_reject_fini);
diff --git a/net/ipv6/netfilter/ip6t_ah.c b/net/ipv6/netfilter/ip6t_ah.c
index 178f6fb..2f7bb20 100644
--- a/net/ipv6/netfilter/ip6t_ah.c
+++ b/net/ipv6/netfilter/ip6t_ah.c
@@ -122,15 +122,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_ah_init(void)
{
return ip6t_register_match(&ah_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_ah_fini(void)
{
ip6t_unregister_match(&ah_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_ah_init);
+module_exit(ip6t_ah_fini);
diff --git a/net/ipv6/netfilter/ip6t_dst.c b/net/ipv6/netfilter/ip6t_dst.c
index e97a702..9422413 100644
--- a/net/ipv6/netfilter/ip6t_dst.c
+++ b/net/ipv6/netfilter/ip6t_dst.c
@@ -206,15 +206,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_dst_init(void)
{
return ip6t_register_match(&opts_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_dst_fini(void)
{
ip6t_unregister_match(&opts_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_dst_init);
+module_exit(ip6t_dst_fini);
diff --git a/net/ipv6/netfilter/ip6t_esp.c b/net/ipv6/netfilter/ip6t_esp.c
index 540b8bf..36bedad 100644
--- a/net/ipv6/netfilter/ip6t_esp.c
+++ b/net/ipv6/netfilter/ip6t_esp.c
@@ -101,15 +101,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_esp_init(void)
{
return ip6t_register_match(&esp_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_esp_fini(void)
{
ip6t_unregister_match(&esp_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_esp_init);
+module_exit(ip6t_esp_fini);
diff --git a/net/ipv6/netfilter/ip6t_eui64.c b/net/ipv6/netfilter/ip6t_eui64.c
index d4b0bad..94dbdb8 100644
--- a/net/ipv6/netfilter/ip6t_eui64.c
+++ b/net/ipv6/netfilter/ip6t_eui64.c
@@ -70,15 +70,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_eui64_init(void)
{
return ip6t_register_match(&eui64_match);
}
-static void __exit fini(void)
+static void __exit ip6t_eui64_fini(void)
{
ip6t_unregister_match(&eui64_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_eui64_init);
+module_exit(ip6t_eui64_fini);
diff --git a/net/ipv6/netfilter/ip6t_frag.c b/net/ipv6/netfilter/ip6t_frag.c
index 4c41e14..06768c8 100644
--- a/net/ipv6/netfilter/ip6t_frag.c
+++ b/net/ipv6/netfilter/ip6t_frag.c
@@ -139,15 +139,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_frag_init(void)
{
return ip6t_register_match(&frag_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_frag_fini(void)
{
ip6t_unregister_match(&frag_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_frag_init);
+module_exit(ip6t_frag_fini);
diff --git a/net/ipv6/netfilter/ip6t_hbh.c b/net/ipv6/netfilter/ip6t_hbh.c
index b4a1fdf..374f1be 100644
--- a/net/ipv6/netfilter/ip6t_hbh.c
+++ b/net/ipv6/netfilter/ip6t_hbh.c
@@ -206,15 +206,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_hbh_init(void)
{
return ip6t_register_match(&opts_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_hbh_fini(void)
{
ip6t_unregister_match(&opts_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_hbh_init);
+module_exit(ip6t_hbh_fini);
diff --git a/net/ipv6/netfilter/ip6t_hl.c b/net/ipv6/netfilter/ip6t_hl.c
index 3740557..44a729e 100644
--- a/net/ipv6/netfilter/ip6t_hl.c
+++ b/net/ipv6/netfilter/ip6t_hl.c
@@ -55,16 +55,16 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_hl_init(void)
{
return ip6t_register_match(&hl_match);
}
-static void __exit fini(void)
+static void __exit ip6t_hl_fini(void)
{
ip6t_unregister_match(&hl_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_hl_init);
+module_exit(ip6t_hl_fini);
diff --git a/net/ipv6/netfilter/ip6t_multiport.c b/net/ipv6/netfilter/ip6t_multiport.c
index 752b65d..10c48ba 100644
--- a/net/ipv6/netfilter/ip6t_multiport.c
+++ b/net/ipv6/netfilter/ip6t_multiport.c
@@ -111,15 +111,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_multiport_init(void)
{
return ip6t_register_match(&multiport_match);
}
-static void __exit fini(void)
+static void __exit ip6t_multiport_fini(void)
{
ip6t_unregister_match(&multiport_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_multiport_init);
+module_exit(ip6t_multiport_fini);
diff --git a/net/ipv6/netfilter/ip6t_owner.c b/net/ipv6/netfilter/ip6t_owner.c
index e2cee3b..5d04799 100644
--- a/net/ipv6/netfilter/ip6t_owner.c
+++ b/net/ipv6/netfilter/ip6t_owner.c
@@ -79,15 +79,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_owner_init(void)
{
return ip6t_register_match(&owner_match);
}
-static void __exit fini(void)
+static void __exit ip6t_owner_fini(void)
{
ip6t_unregister_match(&owner_match);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6t_owner_init);
+module_exit(ip6t_owner_fini);
diff --git a/net/ipv6/netfilter/ip6t_rt.c b/net/ipv6/netfilter/ip6t_rt.c
index 4c6b55b..fbb0184 100644
--- a/net/ipv6/netfilter/ip6t_rt.c
+++ b/net/ipv6/netfilter/ip6t_rt.c
@@ -225,15 +225,15 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init ip6t_rt_init(void)
{
return ip6t_register_match(&rt_match);
}
-static void __exit cleanup(void)
+static void __exit ip6t_rt_fini(void)
{
ip6t_unregister_match(&rt_match);
}
-module_init(init);
-module_exit(cleanup);
+module_init(ip6t_rt_init);
+module_exit(ip6t_rt_fini);
diff --git a/net/ipv6/netfilter/ip6table_filter.c b/net/ipv6/netfilter/ip6table_filter.c
index ce4a968..e5e724d 100644
--- a/net/ipv6/netfilter/ip6table_filter.c
+++ b/net/ipv6/netfilter/ip6table_filter.c
@@ -159,7 +159,7 @@
static int forward = NF_ACCEPT;
module_param(forward, bool, 0000);
-static int __init init(void)
+static int __init ip6table_filter_init(void)
{
int ret;
@@ -201,7 +201,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip6table_filter_fini(void)
{
unsigned int i;
@@ -211,5 +211,5 @@
ip6t_unregister_table(&packet_filter);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6table_filter_init);
+module_exit(ip6table_filter_fini);
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index 30a4627..e1f0f6a 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -228,7 +228,7 @@
},
};
-static int __init init(void)
+static int __init ip6table_mangle_init(void)
{
int ret;
@@ -274,7 +274,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip6table_mangle_fini(void)
{
unsigned int i;
@@ -284,5 +284,5 @@
ip6t_unregister_table(&packet_mangler);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6table_mangle_init);
+module_exit(ip6table_mangle_fini);
diff --git a/net/ipv6/netfilter/ip6table_raw.c b/net/ipv6/netfilter/ip6table_raw.c
index db28ba3..54d1fff 100644
--- a/net/ipv6/netfilter/ip6table_raw.c
+++ b/net/ipv6/netfilter/ip6table_raw.c
@@ -142,7 +142,7 @@
},
};
-static int __init init(void)
+static int __init ip6table_raw_init(void)
{
int ret;
@@ -170,7 +170,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit ip6table_raw_fini(void)
{
unsigned int i;
@@ -180,6 +180,6 @@
ip6t_unregister_table(&packet_raw);
}
-module_init(init);
-module_exit(fini);
+module_init(ip6table_raw_init);
+module_exit(ip6table_raw_fini);
MODULE_LICENSE("GPL");
diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
index c16f629..c8b5a96 100644
--- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
@@ -588,16 +588,16 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yasuyuki KOZAKAI @USAGI <yasuyuki.kozakai@toshiba.co.jp>");
-static int __init init(void)
+static int __init nf_conntrack_l3proto_ipv6_init(void)
{
need_conntrack();
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit nf_conntrack_l3proto_ipv6_fini(void)
{
init_or_cleanup(0);
}
-module_init(init);
-module_exit(fini);
+module_init(nf_conntrack_l3proto_ipv6_init);
+module_exit(nf_conntrack_l3proto_ipv6_fini);
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
new file mode 100644
index 0000000..5659b52
--- /dev/null
+++ b/net/ipv6/tunnel6.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C)2003,2004 USAGI/WIDE Project
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Authors Mitsuru KANDA <mk@linux-ipv6.org>
+ * YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/protocol.h>
+#include <net/xfrm.h>
+
+static struct xfrm6_tunnel *tunnel6_handlers;
+static DEFINE_MUTEX(tunnel6_mutex);
+
+int xfrm6_tunnel_register(struct xfrm6_tunnel *handler)
+{
+ struct xfrm6_tunnel **pprev;
+ int ret = -EEXIST;
+ int priority = handler->priority;
+
+ mutex_lock(&tunnel6_mutex);
+
+ for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) {
+ if ((*pprev)->priority > priority)
+ break;
+ if ((*pprev)->priority == priority)
+ goto err;
+ }
+
+ handler->next = *pprev;
+ *pprev = handler;
+
+ ret = 0;
+
+err:
+ mutex_unlock(&tunnel6_mutex);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(xfrm6_tunnel_register);
+
+int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler)
+{
+ struct xfrm6_tunnel **pprev;
+ int ret = -ENOENT;
+
+ mutex_lock(&tunnel6_mutex);
+
+ for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) {
+ if (*pprev == handler) {
+ *pprev = handler->next;
+ ret = 0;
+ break;
+ }
+ }
+
+ mutex_unlock(&tunnel6_mutex);
+
+ synchronize_net();
+
+ return ret;
+}
+
+EXPORT_SYMBOL(xfrm6_tunnel_deregister);
+
+static int tunnel6_rcv(struct sk_buff **pskb)
+{
+ struct sk_buff *skb = *pskb;
+ struct xfrm6_tunnel *handler;
+
+ for (handler = tunnel6_handlers; handler; handler = handler->next)
+ if (!handler->handler(skb))
+ return 0;
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static void tunnel6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
+ int type, int code, int offset, __u32 info)
+{
+ struct xfrm6_tunnel *handler;
+
+ for (handler = tunnel6_handlers; handler; handler = handler->next)
+ if (!handler->err_handler(skb, opt, type, code, offset, info))
+ break;
+}
+
+static struct inet6_protocol tunnel6_protocol = {
+ .handler = tunnel6_rcv,
+ .err_handler = tunnel6_err,
+ .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
+};
+
+static int __init tunnel6_init(void)
+{
+ if (inet6_add_protocol(&tunnel6_protocol, IPPROTO_IPV6)) {
+ printk(KERN_ERR "tunnel6 init(): can't add protocol\n");
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static void __exit tunnel6_fini(void)
+{
+ if (inet6_del_protocol(&tunnel6_protocol, IPPROTO_IPV6))
+ printk(KERN_ERR "tunnel6 close: can't remove protocol\n");
+}
+
+module_init(tunnel6_init);
+module_exit(tunnel6_fini);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c
index 1ca2da6..cccf8b7 100644
--- a/net/ipv6/xfrm6_input.c
+++ b/net/ipv6/xfrm6_input.c
@@ -28,9 +28,8 @@
IP6_ECN_set_ce(inner_iph);
}
-int xfrm6_rcv_spi(struct sk_buff **pskb, u32 spi)
+int xfrm6_rcv_spi(struct sk_buff *skb, u32 spi)
{
- struct sk_buff *skb = *pskb;
int err;
u32 seq;
struct sec_decap_state xfrm_vec[XFRM_MAX_DEPTH];
@@ -159,5 +158,5 @@
int xfrm6_rcv(struct sk_buff **pskb)
{
- return xfrm6_rcv_spi(pskb, 0);
+ return xfrm6_rcv_spi(*pskb, 0);
}
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 08f9abb..a8f6776 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -28,7 +28,6 @@
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/ipv6.h>
-#include <net/protocol.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
#include <linux/mutex.h>
@@ -357,71 +356,18 @@
return 0;
}
-static struct xfrm6_tunnel *xfrm6_tunnel_handler;
-static DEFINE_MUTEX(xfrm6_tunnel_mutex);
-
-int xfrm6_tunnel_register(struct xfrm6_tunnel *handler)
+static int xfrm6_tunnel_rcv(struct sk_buff *skb)
{
- int ret;
-
- mutex_lock(&xfrm6_tunnel_mutex);
- ret = 0;
- if (xfrm6_tunnel_handler != NULL)
- ret = -EINVAL;
- if (!ret)
- xfrm6_tunnel_handler = handler;
- mutex_unlock(&xfrm6_tunnel_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(xfrm6_tunnel_register);
-
-int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler)
-{
- int ret;
-
- mutex_lock(&xfrm6_tunnel_mutex);
- ret = 0;
- if (xfrm6_tunnel_handler != handler)
- ret = -EINVAL;
- if (!ret)
- xfrm6_tunnel_handler = NULL;
- mutex_unlock(&xfrm6_tunnel_mutex);
-
- synchronize_net();
-
- return ret;
-}
-
-EXPORT_SYMBOL(xfrm6_tunnel_deregister);
-
-static int xfrm6_tunnel_rcv(struct sk_buff **pskb)
-{
- struct sk_buff *skb = *pskb;
- struct xfrm6_tunnel *handler = xfrm6_tunnel_handler;
struct ipv6hdr *iph = skb->nh.ipv6h;
u32 spi;
- /* device-like_ip6ip6_handler() */
- if (handler && handler->handler(pskb) == 0)
- return 0;
-
spi = xfrm6_tunnel_spi_lookup((xfrm_address_t *)&iph->saddr);
- return xfrm6_rcv_spi(pskb, spi);
+ return xfrm6_rcv_spi(skb, spi);
}
-static void xfrm6_tunnel_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __u32 info)
+static int xfrm6_tunnel_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
+ int type, int code, int offset, __u32 info)
{
- struct xfrm6_tunnel *handler = xfrm6_tunnel_handler;
-
- /* call here first for device-like ip6ip6 err handling */
- if (handler) {
- handler->err_handler(skb, opt, type, code, offset, info);
- return;
- }
-
/* xfrm6_tunnel native err handling */
switch (type) {
case ICMPV6_DEST_UNREACH:
@@ -462,7 +408,8 @@
default:
break;
}
- return;
+
+ return 0;
}
static int xfrm6_tunnel_init_state(struct xfrm_state *x)
@@ -493,10 +440,10 @@
.output = xfrm6_tunnel_output,
};
-static struct inet6_protocol xfrm6_tunnel_protocol = {
+static struct xfrm6_tunnel xfrm6_tunnel_handler = {
.handler = xfrm6_tunnel_rcv,
- .err_handler = xfrm6_tunnel_err,
- .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
+ .err_handler = xfrm6_tunnel_err,
+ .priority = 2,
};
static int __init xfrm6_tunnel_init(void)
@@ -508,16 +455,16 @@
"xfrm6_tunnel init: can't add xfrm type\n");
return -EAGAIN;
}
- if (inet6_add_protocol(&xfrm6_tunnel_protocol, IPPROTO_IPV6) < 0) {
+ if (xfrm6_tunnel_register(&xfrm6_tunnel_handler)) {
X6TPRINTK1(KERN_ERR
- "xfrm6_tunnel init(): can't add protocol\n");
+ "xfrm6_tunnel init(): can't add handler\n");
xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6);
return -EAGAIN;
}
if (xfrm6_tunnel_spi_init() < 0) {
X6TPRINTK1(KERN_ERR
"xfrm6_tunnel init: failed to initialize spi\n");
- inet6_del_protocol(&xfrm6_tunnel_protocol, IPPROTO_IPV6);
+ xfrm6_tunnel_deregister(&xfrm6_tunnel_handler);
xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6);
return -EAGAIN;
}
@@ -529,9 +476,9 @@
X6TPRINTK3(KERN_DEBUG "%s()\n", __FUNCTION__);
xfrm6_tunnel_spi_fini();
- if (inet6_del_protocol(&xfrm6_tunnel_protocol, IPPROTO_IPV6) < 0)
+ if (xfrm6_tunnel_deregister(&xfrm6_tunnel_handler))
X6TPRINTK1(KERN_ERR
- "xfrm6_tunnel close: can't remove protocol\n");
+ "xfrm6_tunnel close: can't remove handler\n");
if (xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6) < 0)
X6TPRINTK1(KERN_ERR
"xfrm6_tunnel close: can't remove xfrm type\n");
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 0fb513a..2dbf134 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1892,6 +1892,29 @@
return rc;
}
+
+#ifdef CONFIG_COMPAT
+static int ipx_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ /*
+ * These 4 commands use same structure on 32bit and 64bit. Rest of IPX
+ * commands is handled by generic ioctl code. As these commands are
+ * SIOCPROTOPRIVATE..SIOCPROTOPRIVATE+3, they cannot be handled by generic
+ * code.
+ */
+ switch (cmd) {
+ case SIOCAIPXITFCRT:
+ case SIOCAIPXPRISLT:
+ case SIOCIPXCFGDATA:
+ case SIOCIPXNCPCONN:
+ return ipx_ioctl(sock, cmd, arg);
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+#endif
+
+
/*
* Socket family declarations
*/
@@ -1913,6 +1936,9 @@
.getname = ipx_getname,
.poll = datagram_poll,
.ioctl = ipx_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ipx_compat_ioctl,
+#endif
.listen = sock_no_listen,
.shutdown = sock_no_shutdown, /* FIXME: support shutdown */
.setsockopt = ipx_setsockopt,
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 627b113..2f37c9f 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1830,6 +1830,19 @@
return 0;
}
+#ifdef CONFIG_COMPAT
+/*
+ * Function irda_ioctl (sock, cmd, arg)
+ */
+static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ /*
+ * All IRDA's ioctl are standard ones.
+ */
+ return -ENOIOCTLCMD;
+}
+#endif
+
/*
* Function irda_setsockopt (sock, level, optname, optval, optlen)
*
@@ -2476,6 +2489,9 @@
.getname = irda_getname,
.poll = irda_poll,
.ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
.listen = irda_listen,
.shutdown = irda_shutdown,
.setsockopt = irda_setsockopt,
@@ -2497,6 +2513,9 @@
.getname = irda_getname,
.poll = datagram_poll,
.ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
.listen = irda_listen,
.shutdown = irda_shutdown,
.setsockopt = irda_setsockopt,
@@ -2518,6 +2537,9 @@
.getname = irda_getname,
.poll = datagram_poll,
.ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
.listen = irda_listen,
.shutdown = irda_shutdown,
.setsockopt = irda_setsockopt,
@@ -2540,6 +2562,9 @@
.getname = irda_getname,
.poll = datagram_poll,
.ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
.listen = sock_no_listen,
.shutdown = irda_shutdown,
.setsockopt = irda_setsockopt,
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index cd191b0..e38a4b5 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -624,7 +624,7 @@
static char ftp_names[MAX_PORTS][2][sizeof("ftp-65535")];
/* don't make this __exit, since it's called from __init ! */
-static void fini(void)
+static void nf_conntrack_ftp_fini(void)
{
int i, j;
for (i = 0; i < ports_c; i++) {
@@ -642,7 +642,7 @@
kfree(ftp_buffer);
}
-static int __init init(void)
+static int __init nf_conntrack_ftp_init(void)
{
int i, j = -1, ret = 0;
char *tmpname;
@@ -683,7 +683,7 @@
printk("nf_ct_ftp: failed to register helper "
" for pf: %d port: %d\n",
ftp[i][j].tuple.src.l3num, ports[i]);
- fini();
+ nf_conntrack_ftp_fini();
return ret;
}
}
@@ -692,5 +692,5 @@
return 0;
}
-module_init(init);
-module_exit(fini);
+module_init(nf_conntrack_ftp_init);
+module_exit(nf_conntrack_ftp_fini);
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index cf798e6..9cccc32 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -615,7 +615,7 @@
static struct ctl_table_header *nf_ct_sysctl_header;
#endif
-int __init init(void)
+int __init nf_conntrack_proto_sctp_init(void)
{
int ret;
@@ -652,7 +652,7 @@
return ret;
}
-void __exit fini(void)
+void __exit nf_conntrack_proto_sctp_fini(void)
{
nf_conntrack_protocol_unregister(&nf_conntrack_protocol_sctp6);
nf_conntrack_protocol_unregister(&nf_conntrack_protocol_sctp4);
@@ -662,8 +662,8 @@
DEBUGP("SCTP conntrack module unloaded\n");
}
-module_init(init);
-module_exit(fini);
+module_init(nf_conntrack_proto_sctp_init);
+module_exit(nf_conntrack_proto_sctp_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kiran Kumar Immidi");
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 75577e1..c72aa3c 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -806,18 +806,18 @@
nf_ct_iterate_cleanup(kill_proto, proto);
}
-static int __init init(void)
+static int __init nf_conntrack_standalone_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit nf_conntrack_standalone_fini(void)
{
init_or_cleanup(0);
}
-module_init(init);
-module_exit(fini);
+module_init(nf_conntrack_standalone_init);
+module_exit(nf_conntrack_standalone_fini);
/* Some modules need us, but don't depend directly on any symbol.
They should call this. */
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 54cbbaa..3e3f544 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -1081,13 +1081,13 @@
return status;
}
-static int __init init(void)
+static int __init nfnetlink_log_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit nfnetlink_log_fini(void)
{
init_or_cleanup(0);
}
@@ -1097,5 +1097,5 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_ULOG);
-module_init(init);
-module_exit(fini);
+module_init(nfnetlink_log_init);
+module_exit(nfnetlink_log_fini);
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index b570166..d0e62f6 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -1117,13 +1117,13 @@
return status;
}
-static int __init init(void)
+static int __init nfnetlink_queue_init(void)
{
return init_or_cleanup(1);
}
-static void __exit fini(void)
+static void __exit nfnetlink_queue_fini(void)
{
init_or_cleanup(0);
}
@@ -1133,5 +1133,5 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_QUEUE);
-module_init(init);
-module_exit(fini);
+module_init(nfnetlink_queue_init);
+module_exit(nfnetlink_queue_fini);
diff --git a/net/netfilter/xt_CLASSIFY.c b/net/netfilter/xt_CLASSIFY.c
index 3cd2ac9..e54e577 100644
--- a/net/netfilter/xt_CLASSIFY.c
+++ b/net/netfilter/xt_CLASSIFY.c
@@ -62,7 +62,7 @@
};
-static int __init init(void)
+static int __init xt_classify_init(void)
{
int ret;
@@ -77,11 +77,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_classify_fini(void)
{
xt_unregister_target(&classify_reg);
xt_unregister_target(&classify6_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_classify_init);
+module_exit(xt_classify_fini);
diff --git a/net/netfilter/xt_CONNMARK.c b/net/netfilter/xt_CONNMARK.c
index 35448b8..60c375d 100644
--- a/net/netfilter/xt_CONNMARK.c
+++ b/net/netfilter/xt_CONNMARK.c
@@ -115,7 +115,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_connmark_init(void)
{
int ret;
@@ -132,11 +132,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_connmark_fini(void)
{
xt_unregister_target(&connmark_reg);
xt_unregister_target(&connmark6_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_connmark_init);
+module_exit(xt_connmark_fini);
diff --git a/net/netfilter/xt_MARK.c b/net/netfilter/xt_MARK.c
index 73bdd5c..ee9c34e 100644
--- a/net/netfilter/xt_MARK.c
+++ b/net/netfilter/xt_MARK.c
@@ -145,7 +145,7 @@
.revision = 0,
};
-static int __init init(void)
+static int __init xt_mark_init(void)
{
int err;
@@ -166,12 +166,12 @@
return err;
}
-static void __exit fini(void)
+static void __exit xt_mark_fini(void)
{
xt_unregister_target(&ipt_mark_reg_v0);
xt_unregister_target(&ipt_mark_reg_v1);
xt_unregister_target(&ip6t_mark_reg_v0);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_mark_init);
+module_exit(xt_mark_fini);
diff --git a/net/netfilter/xt_NFQUEUE.c b/net/netfilter/xt_NFQUEUE.c
index 2873e1c..86ccceb 100644
--- a/net/netfilter/xt_NFQUEUE.c
+++ b/net/netfilter/xt_NFQUEUE.c
@@ -61,7 +61,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_nfqueue_init(void)
{
int ret;
ret = xt_register_target(&ipt_NFQ_reg);
@@ -83,12 +83,12 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_nfqueue_fini(void)
{
xt_unregister_target(&arpt_NFQ_reg);
xt_unregister_target(&ip6t_NFQ_reg);
xt_unregister_target(&ipt_NFQ_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_nfqueue_init);
+module_exit(xt_nfqueue_fini);
diff --git a/net/netfilter/xt_NOTRACK.c b/net/netfilter/xt_NOTRACK.c
index cf2ebd7..98f4b53 100644
--- a/net/netfilter/xt_NOTRACK.c
+++ b/net/netfilter/xt_NOTRACK.c
@@ -52,7 +52,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_notrack_init(void)
{
int ret;
@@ -67,11 +67,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_notrack_fini(void)
{
xt_unregister_target(¬rack6_reg);
xt_unregister_target(¬rack_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_notrack_init);
+module_exit(xt_notrack_fini);
diff --git a/net/netfilter/xt_comment.c b/net/netfilter/xt_comment.c
index 2637724..197609c 100644
--- a/net/netfilter/xt_comment.c
+++ b/net/netfilter/xt_comment.c
@@ -45,7 +45,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_comment_init(void)
{
int ret;
@@ -60,11 +60,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_comment_fini(void)
{
xt_unregister_match(&comment_match);
xt_unregister_match(&comment6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_comment_init);
+module_exit(xt_comment_fini);
diff --git a/net/netfilter/xt_connbytes.c b/net/netfilter/xt_connbytes.c
index 4985f5e..1396fe2 100644
--- a/net/netfilter/xt_connbytes.c
+++ b/net/netfilter/xt_connbytes.c
@@ -160,7 +160,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_connbytes_init(void)
{
int ret;
ret = xt_register_match(&connbytes_match);
@@ -173,11 +173,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_connbytes_fini(void)
{
xt_unregister_match(&connbytes_match);
xt_unregister_match(&connbytes6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_connbytes_init);
+module_exit(xt_connbytes_fini);
diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c
index 7b16f1e..dc26a27 100644
--- a/net/netfilter/xt_connmark.c
+++ b/net/netfilter/xt_connmark.c
@@ -102,7 +102,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_connmark_init(void)
{
int ret;
@@ -118,11 +118,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_connmark_fini(void)
{
xt_unregister_match(&connmark6_match);
xt_unregister_match(&connmark_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_connmark_init);
+module_exit(xt_connmark_fini);
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 65a8480..145489a 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -239,7 +239,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_conntrack_init(void)
{
int ret;
need_conntrack();
@@ -248,10 +248,10 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_conntrack_fini(void)
{
xt_unregister_match(&conntrack_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_conntrack_init);
+module_exit(xt_conntrack_fini);
diff --git a/net/netfilter/xt_dccp.c b/net/netfilter/xt_dccp.c
index 2f331de..dfb10b6 100644
--- a/net/netfilter/xt_dccp.c
+++ b/net/netfilter/xt_dccp.c
@@ -164,7 +164,7 @@
};
-static int __init init(void)
+static int __init xt_dccp_init(void)
{
int ret;
@@ -191,12 +191,12 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_dccp_fini(void)
{
xt_unregister_match(&dccp6_match);
xt_unregister_match(&dccp_match);
kfree(dccp_optbuf);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_dccp_init);
+module_exit(xt_dccp_fini);
diff --git a/net/netfilter/xt_helper.c b/net/netfilter/xt_helper.c
index 101f000..799c2a4 100644
--- a/net/netfilter/xt_helper.c
+++ b/net/netfilter/xt_helper.c
@@ -182,7 +182,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_helper_init(void)
{
int ret;
need_conntrack();
@@ -198,12 +198,12 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_helper_fini(void)
{
xt_unregister_match(&helper_match);
xt_unregister_match(&helper6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_helper_init);
+module_exit(xt_helper_fini);
diff --git a/net/netfilter/xt_length.c b/net/netfilter/xt_length.c
index 38560ca..109132c 100644
--- a/net/netfilter/xt_length.c
+++ b/net/netfilter/xt_length.c
@@ -68,7 +68,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_length_init(void)
{
int ret;
ret = xt_register_match(&length_match);
@@ -81,11 +81,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_length_fini(void)
{
xt_unregister_match(&length_match);
xt_unregister_match(&length6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_length_init);
+module_exit(xt_length_fini);
diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c
index e91c1a4..ce7fdb7 100644
--- a/net/netfilter/xt_limit.c
+++ b/net/netfilter/xt_limit.c
@@ -153,7 +153,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_limit_init(void)
{
int ret;
@@ -168,11 +168,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_limit_fini(void)
{
xt_unregister_match(&ipt_limit_reg);
xt_unregister_match(&limit6_reg);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_limit_init);
+module_exit(xt_limit_fini);
diff --git a/net/netfilter/xt_mac.c b/net/netfilter/xt_mac.c
index f4defa2..356290f 100644
--- a/net/netfilter/xt_mac.c
+++ b/net/netfilter/xt_mac.c
@@ -62,7 +62,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_mac_init(void)
{
int ret;
ret = xt_register_match(&mac_match);
@@ -76,11 +76,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_mac_fini(void)
{
xt_unregister_match(&mac_match);
xt_unregister_match(&mac6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_mac_init);
+module_exit(xt_mac_fini);
diff --git a/net/netfilter/xt_mark.c b/net/netfilter/xt_mark.c
index ce0badf..8b385a3 100644
--- a/net/netfilter/xt_mark.c
+++ b/net/netfilter/xt_mark.c
@@ -69,7 +69,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_mark_init(void)
{
int ret;
ret = xt_register_match(&mark_match);
@@ -83,11 +83,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_mark_fini(void)
{
xt_unregister_match(&mark_match);
xt_unregister_match(&mark6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_mark_init);
+module_exit(xt_mark_fini);
diff --git a/net/netfilter/xt_physdev.c b/net/netfilter/xt_physdev.c
index 089f4f7..5fe4c9d 100644
--- a/net/netfilter/xt_physdev.c
+++ b/net/netfilter/xt_physdev.c
@@ -134,7 +134,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_physdev_init(void)
{
int ret;
@@ -149,11 +149,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_physdev_fini(void)
{
xt_unregister_match(&physdev_match);
xt_unregister_match(&physdev6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_physdev_init);
+module_exit(xt_physdev_fini);
diff --git a/net/netfilter/xt_pkttype.c b/net/netfilter/xt_pkttype.c
index 8b8bca9..3ac703b 100644
--- a/net/netfilter/xt_pkttype.c
+++ b/net/netfilter/xt_pkttype.c
@@ -49,7 +49,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_pkttype_init(void)
{
int ret;
ret = xt_register_match(&pkttype_match);
@@ -63,11 +63,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_pkttype_fini(void)
{
xt_unregister_match(&pkttype_match);
xt_unregister_match(&pkttype6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_pkttype_init);
+module_exit(xt_pkttype_fini);
diff --git a/net/netfilter/xt_realm.c b/net/netfilter/xt_realm.c
index 5e31a4a..a80b7d13 100644
--- a/net/netfilter/xt_realm.c
+++ b/net/netfilter/xt_realm.c
@@ -49,15 +49,15 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_realm_init(void)
{
return xt_register_match(&realm_match);
}
-static void __exit fini(void)
+static void __exit xt_realm_fini(void)
{
xt_unregister_match(&realm_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_realm_init);
+module_exit(xt_realm_fini);
diff --git a/net/netfilter/xt_sctp.c b/net/netfilter/xt_sctp.c
index c6eb24a..34bd872 100644
--- a/net/netfilter/xt_sctp.c
+++ b/net/netfilter/xt_sctp.c
@@ -200,7 +200,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_sctp_init(void)
{
int ret;
ret = xt_register_match(&sctp_match);
@@ -214,11 +214,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_sctp_fini(void)
{
xt_unregister_match(&sctp6_match);
xt_unregister_match(&sctp_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_sctp_init);
+module_exit(xt_sctp_fini);
diff --git a/net/netfilter/xt_state.c b/net/netfilter/xt_state.c
index e6c0be9..f9e304d 100644
--- a/net/netfilter/xt_state.c
+++ b/net/netfilter/xt_state.c
@@ -89,7 +89,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_state_init(void)
{
int ret;
@@ -106,11 +106,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_state_fini(void)
{
xt_unregister_match(&state_match);
xt_unregister_match(&state6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_state_init);
+module_exit(xt_state_fini);
diff --git a/net/netfilter/xt_string.c b/net/netfilter/xt_string.c
index 703d80f..79d9ea6 100644
--- a/net/netfilter/xt_string.c
+++ b/net/netfilter/xt_string.c
@@ -91,7 +91,7 @@
.me = THIS_MODULE
};
-static int __init init(void)
+static int __init xt_string_init(void)
{
int ret;
@@ -105,11 +105,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_string_fini(void)
{
xt_unregister_match(&string_match);
xt_unregister_match(&string6_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_string_init);
+module_exit(xt_string_fini);
diff --git a/net/netfilter/xt_tcpmss.c b/net/netfilter/xt_tcpmss.c
index 70a8858..cf7d335 100644
--- a/net/netfilter/xt_tcpmss.c
+++ b/net/netfilter/xt_tcpmss.c
@@ -112,7 +112,7 @@
};
-static int __init init(void)
+static int __init xt_tcpmss_init(void)
{
int ret;
ret = xt_register_match(&tcpmss_match);
@@ -126,11 +126,11 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_tcpmss_fini(void)
{
xt_unregister_match(&tcpmss6_match);
xt_unregister_match(&tcpmss_match);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_tcpmss_init);
+module_exit(xt_tcpmss_fini);
diff --git a/net/netfilter/xt_tcpudp.c b/net/netfilter/xt_tcpudp.c
index 14a990e..1b61dac 100644
--- a/net/netfilter/xt_tcpudp.c
+++ b/net/netfilter/xt_tcpudp.c
@@ -238,7 +238,7 @@
.me = THIS_MODULE,
};
-static int __init init(void)
+static int __init xt_tcpudp_init(void)
{
int ret;
ret = xt_register_match(&tcp_matchstruct);
@@ -268,7 +268,7 @@
return ret;
}
-static void __exit fini(void)
+static void __exit xt_tcpudp_fini(void)
{
xt_unregister_match(&udp6_matchstruct);
xt_unregister_match(&udp_matchstruct);
@@ -276,5 +276,5 @@
xt_unregister_match(&tcp_matchstruct);
}
-module_init(init);
-module_exit(fini);
+module_init(xt_tcpudp_init);
+module_exit(xt_tcpudp_fini);
diff --git a/net/socket.c b/net/socket.c
index fcd77ea..b13042f 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -119,6 +119,9 @@
static ssize_t sock_sendpage(struct file *file, struct page *page,
int offset, size_t size, loff_t *ppos, int more);
+extern ssize_t generic_splice_sendpage(struct inode *inode, struct file *out,
+ size_t len, unsigned int flags);
+
/*
* Socket files have a set of 'special' operations as well as the generic file ones. These don't appear
@@ -141,7 +144,8 @@
.fasync = sock_fasync,
.readv = sock_readv,
.writev = sock_writev,
- .sendpage = sock_sendpage
+ .sendpage = sock_sendpage,
+ .splice_write = generic_splice_sendpage,
};
/*
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index 3bbc810..c8e2103 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -2814,7 +2814,7 @@
struct device_node *io = NULL, *info = NULL;
int vol, res;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -ENODEV;
awacs_subframe = 0;
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index aa57170..f0794ef 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -869,7 +869,7 @@
u32 layout_id = 0;
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return -ENODEV;
chip->subframe = 0;