diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 51dbc52..fa65b99 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5009,6 +5009,122 @@
 	return 0;
 }
 
+static int ata_host_set_request_pm(struct ata_host_set *host_set,
+				   pm_message_t mesg, unsigned int action,
+				   unsigned int ehi_flags, int wait)
+{
+	unsigned long flags;
+	int i, rc;
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+
+		/* Previous resume operation might still be in
+		 * progress.  Wait for PM_PENDING to clear.
+		 */
+		if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+			ata_port_wait_eh(ap);
+			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+		}
+
+		/* request PM ops to EH */
+		spin_lock_irqsave(ap->lock, flags);
+
+		ap->pm_mesg = mesg;
+		if (wait) {
+			rc = 0;
+			ap->pm_result = &rc;
+		}
+
+		ap->pflags |= ATA_PFLAG_PM_PENDING;
+		ap->eh_info.action |= action;
+		ap->eh_info.flags |= ehi_flags;
+
+		ata_port_schedule_eh(ap);
+
+		spin_unlock_irqrestore(ap->lock, flags);
+
+		/* wait and check result */
+		if (wait) {
+			ata_port_wait_eh(ap);
+			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+			if (rc)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	ata_host_set_suspend - suspend host_set
+ *	@host_set: host_set to suspend
+ *	@mesg: PM message
+ *
+ *	Suspend @host_set.  Actual operation is performed by EH.  This
+ *	function requests EH to perform PM operations and waits for EH
+ *	to finish.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg)
+{
+	int i, j, rc;
+
+	rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1);
+	if (rc)
+		goto fail;
+
+	/* EH is quiescent now.  Fail if we have any ready device.
+	 * This happens if hotplug occurs between completion of device
+	 * suspension and here.
+	 */
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+
+		for (j = 0; j < ATA_MAX_DEVICES; j++) {
+			struct ata_device *dev = &ap->device[j];
+
+			if (ata_dev_ready(dev)) {
+				ata_port_printk(ap, KERN_WARNING,
+						"suspend failed, device %d "
+						"still active\n", dev->devno);
+				rc = -EBUSY;
+				goto fail;
+			}
+		}
+	}
+
+	host_set->dev->power.power_state = mesg;
+	return 0;
+
+ fail:
+	ata_host_set_resume(host_set);
+	return rc;
+}
+
+/**
+ *	ata_host_set_resume - resume host_set
+ *	@host_set: host_set to resume
+ *
+ *	Resume @host_set.  Actual operation is performed by EH.  This
+ *	function requests EH to perform PM operations and returns.
+ *	Note that all resume operations are performed parallely.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_host_set_resume(struct ata_host_set *host_set)
+{
+	ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET,
+				ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+	host_set->dev->power.power_state = PMSG_ON;
+}
+
 /**
  *	ata_port_start - Set port up for dma.
  *	@ap: Port to initialize
@@ -5651,20 +5767,55 @@
 	return (tmp == bits->val) ? 1 : 0;
 }
 
-int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-	return 0;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		pci_disable_device(pdev);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 
-int ata_pci_device_resume(struct pci_dev *pdev)
+void ata_pci_device_do_resume(struct pci_dev *pdev)
 {
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	pci_enable_device(pdev);
 	pci_set_master(pdev);
+}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+	int rc = 0;
+
+	rc = ata_host_set_suspend(host_set, state);
+	if (rc)
+		return rc;
+
+	if (host_set->next) {
+		rc = ata_host_set_suspend(host_set->next, state);
+		if (rc) {
+			ata_host_set_resume(host_set);
+			return rc;
+		}
+	}
+
+	ata_pci_device_do_suspend(pdev, state);
+
+	return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+	ata_pci_device_do_resume(pdev);
+	ata_host_set_resume(host_set);
+	if (host_set->next)
+		ata_host_set_resume(host_set->next);
+
 	return 0;
 }
 #endif /* CONFIG_PCI */
@@ -5844,6 +5995,8 @@
 EXPORT_SYMBOL_GPL(sata_scr_write_flush);
 EXPORT_SYMBOL_GPL(ata_port_online);
 EXPORT_SYMBOL_GPL(ata_port_offline);
+EXPORT_SYMBOL_GPL(ata_host_set_suspend);
+EXPORT_SYMBOL_GPL(ata_host_set_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
@@ -5858,6 +6011,8 @@
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 EXPORT_SYMBOL_GPL(ata_pci_default_filter);