| #include <linux/pci.h> |
| #include <linux/acpi.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/dmi.h> |
| #include <asm/numa.h> |
| #include <asm/pci_x86.h> |
| |
| struct pci_root_info { |
| char *name; |
| unsigned int res_num; |
| struct resource *res; |
| struct pci_bus *bus; |
| int busnum; |
| }; |
| |
| static acpi_status |
| resource_to_addr(struct acpi_resource *resource, |
| struct acpi_resource_address64 *addr) |
| { |
| acpi_status status; |
| |
| status = acpi_resource_to_address64(resource, addr); |
| if (ACPI_SUCCESS(status) && |
| (addr->resource_type == ACPI_MEMORY_RANGE || |
| addr->resource_type == ACPI_IO_RANGE) && |
| addr->address_length > 0 && |
| addr->producer_consumer == ACPI_PRODUCER) { |
| return AE_OK; |
| } |
| return AE_ERROR; |
| } |
| |
| static acpi_status |
| count_resource(struct acpi_resource *acpi_res, void *data) |
| { |
| struct pci_root_info *info = data; |
| struct acpi_resource_address64 addr; |
| acpi_status status; |
| |
| if (info->res_num >= PCI_BUS_NUM_RESOURCES) |
| return AE_OK; |
| |
| status = resource_to_addr(acpi_res, &addr); |
| if (ACPI_SUCCESS(status)) |
| info->res_num++; |
| return AE_OK; |
| } |
| |
| static acpi_status |
| setup_resource(struct acpi_resource *acpi_res, void *data) |
| { |
| struct pci_root_info *info = data; |
| struct resource *res; |
| struct acpi_resource_address64 addr; |
| acpi_status status; |
| unsigned long flags; |
| struct resource *root; |
| |
| if (info->res_num >= PCI_BUS_NUM_RESOURCES) |
| return AE_OK; |
| |
| status = resource_to_addr(acpi_res, &addr); |
| if (!ACPI_SUCCESS(status)) |
| return AE_OK; |
| |
| if (addr.resource_type == ACPI_MEMORY_RANGE) { |
| root = &iomem_resource; |
| flags = IORESOURCE_MEM; |
| if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY) |
| flags |= IORESOURCE_PREFETCH; |
| } else if (addr.resource_type == ACPI_IO_RANGE) { |
| root = &ioport_resource; |
| flags = IORESOURCE_IO; |
| } else |
| return AE_OK; |
| |
| res = &info->res[info->res_num]; |
| res->name = info->name; |
| res->flags = flags; |
| res->start = addr.minimum + addr.translation_offset; |
| res->end = res->start + addr.address_length - 1; |
| res->child = NULL; |
| |
| if (insert_resource(root, res)) { |
| printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " |
| "from %s for %s\n", (unsigned long) res->start, |
| (unsigned long) res->end, root->name, info->name); |
| } else { |
| info->bus->resource[info->res_num] = res; |
| info->res_num++; |
| } |
| return AE_OK; |
| } |
| |
| static void |
| adjust_transparent_bridge_resources(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| int i; |
| u16 class = dev->class >> 8; |
| |
| if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) { |
| for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) |
| dev->subordinate->resource[i] = |
| dev->bus->resource[i - 3]; |
| } |
| } |
| } |
| |
| static void |
| get_current_resources(struct acpi_device *device, int busnum, |
| int domain, struct pci_bus *bus) |
| { |
| struct pci_root_info info; |
| size_t size; |
| |
| info.bus = bus; |
| info.res_num = 0; |
| acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, |
| &info); |
| if (!info.res_num) |
| return; |
| |
| size = sizeof(*info.res) * info.res_num; |
| info.res = kmalloc(size, GFP_KERNEL); |
| if (!info.res) |
| goto res_alloc_fail; |
| |
| info.name = kmalloc(16, GFP_KERNEL); |
| if (!info.name) |
| goto name_alloc_fail; |
| sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum); |
| |
| info.res_num = 0; |
| acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, |
| &info); |
| if (info.res_num) |
| adjust_transparent_bridge_resources(bus); |
| |
| return; |
| |
| name_alloc_fail: |
| kfree(info.res); |
| res_alloc_fail: |
| return; |
| } |
| |
| struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) |
| { |
| struct pci_bus *bus; |
| struct pci_sysdata *sd; |
| int node; |
| #ifdef CONFIG_ACPI_NUMA |
| int pxm; |
| #endif |
| |
| if (domain && !pci_domains_supported) { |
| printk(KERN_WARNING "PCI: Multiple domains not supported " |
| "(dom %d, bus %d)\n", domain, busnum); |
| return NULL; |
| } |
| |
| node = -1; |
| #ifdef CONFIG_ACPI_NUMA |
| pxm = acpi_get_pxm(device->handle); |
| if (pxm >= 0) |
| node = pxm_to_node(pxm); |
| if (node != -1) |
| set_mp_bus_to_node(busnum, node); |
| else |
| #endif |
| node = get_mp_bus_to_node(busnum); |
| |
| if (node != -1 && !node_online(node)) |
| node = -1; |
| |
| /* Allocate per-root-bus (not per bus) arch-specific data. |
| * TODO: leak; this memory is never freed. |
| * It's arguable whether it's worth the trouble to care. |
| */ |
| sd = kzalloc(sizeof(*sd), GFP_KERNEL); |
| if (!sd) { |
| printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); |
| return NULL; |
| } |
| |
| sd->domain = domain; |
| sd->node = node; |
| /* |
| * Maybe the desired pci bus has been already scanned. In such case |
| * it is unnecessary to scan the pci bus with the given domain,busnum. |
| */ |
| bus = pci_find_bus(domain, busnum); |
| if (bus) { |
| /* |
| * If the desired bus exits, the content of bus->sysdata will |
| * be replaced by sd. |
| */ |
| memcpy(bus->sysdata, sd, sizeof(*sd)); |
| kfree(sd); |
| } else |
| bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); |
| |
| if (!bus) |
| kfree(sd); |
| |
| if (bus && node != -1) { |
| #ifdef CONFIG_ACPI_NUMA |
| if (pxm >= 0) |
| dev_printk(KERN_DEBUG, &bus->dev, |
| "on NUMA node %d (pxm %d)\n", node, pxm); |
| #else |
| dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node); |
| #endif |
| } |
| |
| if (bus && (pci_probe & PCI_USE__CRS)) |
| get_current_resources(device, busnum, domain, bus); |
| return bus; |
| } |
| |
| int __init pci_acpi_init(void) |
| { |
| struct pci_dev *dev = NULL; |
| |
| if (pcibios_scanned) |
| return 0; |
| |
| if (acpi_noirq) |
| return 0; |
| |
| printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); |
| acpi_irq_penalty_init(); |
| pcibios_scanned++; |
| pcibios_enable_irq = acpi_pci_irq_enable; |
| pcibios_disable_irq = acpi_pci_irq_disable; |
| |
| if (pci_routeirq) { |
| /* |
| * PCI IRQ routing is set up by pci_enable_device(), but we |
| * also do it here in case there are still broken drivers that |
| * don't use pci_enable_device(). |
| */ |
| printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); |
| for_each_pci_dev(dev) |
| acpi_pci_irq_enable(dev); |
| } |
| |
| return 0; |
| } |