| /* |
| 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux. |
| |
| Written By: Adam Radford <linuxraid@lsi.com> |
| |
| Copyright (C) 2009 LSI Corporation. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; version 2 of the License. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| NO WARRANTY |
| THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| solely responsible for determining the appropriateness of using and |
| distributing the Program and assumes all risks associated with its |
| exercise of rights under this Agreement, including but not limited to |
| the risks and costs of program errors, damage to or loss of data, |
| programs or equipment, and unavailability or interruption of operations. |
| |
| DISCLAIMER OF LIABILITY |
| NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| |
| Controllers supported by this driver: |
| |
| LSI 3ware 9750 6Gb/s SAS/SATA-RAID |
| |
| Bugs/Comments/Suggestions should be mailed to: |
| linuxraid@lsi.com |
| |
| For more information, goto: |
| http://www.lsi.com |
| |
| History |
| ------- |
| 3.26.02.000 - Initial driver release. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/reboot.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/moduleparam.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/time.h> |
| #include <linux/mutex.h> |
| #include <linux/smp_lock.h> |
| #include <linux/slab.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsi_cmnd.h> |
| #include "3w-sas.h" |
| |
| /* Globals */ |
| #define TW_DRIVER_VERSION "3.26.02.000" |
| static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT]; |
| static unsigned int twl_device_extension_count; |
| static int twl_major = -1; |
| extern struct timezone sys_tz; |
| |
| /* Module parameters */ |
| MODULE_AUTHOR ("LSI"); |
| MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(TW_DRIVER_VERSION); |
| |
| static int use_msi; |
| module_param(use_msi, int, S_IRUGO); |
| MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0"); |
| |
| /* Function prototypes */ |
| static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset); |
| |
| /* Functions */ |
| |
| /* This function returns AENs through sysfs */ |
| static ssize_t twl_sysfs_aen_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *outbuf, loff_t offset, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct Scsi_Host *shost = class_to_shost(dev); |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; |
| unsigned long flags = 0; |
| ssize_t ret; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH); |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| |
| return ret; |
| } /* End twl_sysfs_aen_read() */ |
| |
| /* aen_read sysfs attribute initializer */ |
| static struct bin_attribute twl_sysfs_aen_read_attr = { |
| .attr = { |
| .name = "3ware_aen_read", |
| .mode = S_IRUSR, |
| }, |
| .size = 0, |
| .read = twl_sysfs_aen_read |
| }; |
| |
| /* This function returns driver compatibility info through sysfs */ |
| static ssize_t twl_sysfs_compat_info(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *outbuf, loff_t offset, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct Scsi_Host *shost = class_to_shost(dev); |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; |
| unsigned long flags = 0; |
| ssize_t ret; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| |
| return ret; |
| } /* End twl_sysfs_compat_info() */ |
| |
| /* compat_info sysfs attribute initializer */ |
| static struct bin_attribute twl_sysfs_compat_info_attr = { |
| .attr = { |
| .name = "3ware_compat_info", |
| .mode = S_IRUSR, |
| }, |
| .size = 0, |
| .read = twl_sysfs_compat_info |
| }; |
| |
| /* Show some statistics about the card */ |
| static ssize_t twl_show_stats(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *host = class_to_shost(dev); |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| unsigned long flags = 0; |
| ssize_t len; |
| |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n" |
| "Current commands posted: %4d\n" |
| "Max commands posted: %4d\n" |
| "Last sgl length: %4d\n" |
| "Max sgl length: %4d\n" |
| "Last sector count: %4d\n" |
| "Max sector count: %4d\n" |
| "SCSI Host Resets: %4d\n" |
| "AEN's: %4d\n", |
| TW_DRIVER_VERSION, |
| tw_dev->posted_request_count, |
| tw_dev->max_posted_request_count, |
| tw_dev->sgl_entries, |
| tw_dev->max_sgl_entries, |
| tw_dev->sector_count, |
| tw_dev->max_sector_count, |
| tw_dev->num_resets, |
| tw_dev->aen_count); |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| return len; |
| } /* End twl_show_stats() */ |
| |
| /* This function will set a devices queue depth */ |
| static int twl_change_queue_depth(struct scsi_device *sdev, int queue_depth, |
| int reason) |
| { |
| if (reason != SCSI_QDEPTH_DEFAULT) |
| return -EOPNOTSUPP; |
| |
| if (queue_depth > TW_Q_LENGTH-2) |
| queue_depth = TW_Q_LENGTH-2; |
| scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); |
| return queue_depth; |
| } /* End twl_change_queue_depth() */ |
| |
| /* stats sysfs attribute initializer */ |
| static struct device_attribute twl_host_stats_attr = { |
| .attr = { |
| .name = "3ware_stats", |
| .mode = S_IRUGO, |
| }, |
| .show = twl_show_stats |
| }; |
| |
| /* Host attributes initializer */ |
| static struct device_attribute *twl_host_attrs[] = { |
| &twl_host_stats_attr, |
| NULL, |
| }; |
| |
| /* This function will look up an AEN severity string */ |
| static char *twl_aen_severity_lookup(unsigned char severity_code) |
| { |
| char *retval = NULL; |
| |
| if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) || |
| (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG)) |
| goto out; |
| |
| retval = twl_aen_severity_table[severity_code]; |
| out: |
| return retval; |
| } /* End twl_aen_severity_lookup() */ |
| |
| /* This function will queue an event */ |
| static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header) |
| { |
| u32 local_time; |
| struct timeval time; |
| TW_Event *event; |
| unsigned short aen; |
| char host[16]; |
| char *error_str; |
| |
| tw_dev->aen_count++; |
| |
| /* Fill out event info */ |
| event = tw_dev->event_queue[tw_dev->error_index]; |
| |
| host[0] = '\0'; |
| if (tw_dev->host) |
| sprintf(host, " scsi%d:", tw_dev->host->host_no); |
| |
| aen = le16_to_cpu(header->status_block.error); |
| memset(event, 0, sizeof(TW_Event)); |
| |
| event->severity = TW_SEV_OUT(header->status_block.severity__reserved); |
| do_gettimeofday(&time); |
| local_time = (u32)(time.tv_sec - (sys_tz.tz_minuteswest * 60)); |
| event->time_stamp_sec = local_time; |
| event->aen_code = aen; |
| event->retrieved = TW_AEN_NOT_RETRIEVED; |
| event->sequence_id = tw_dev->error_sequence_id; |
| tw_dev->error_sequence_id++; |
| |
| /* Check for embedded error string */ |
| error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]); |
| |
| header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0'; |
| event->parameter_len = strlen(header->err_specific_desc); |
| memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str)); |
| if (event->severity != TW_AEN_SEVERITY_DEBUG) |
| printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", |
| host, |
| twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)), |
| TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str, |
| header->err_specific_desc); |
| else |
| tw_dev->aen_count--; |
| |
| tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH; |
| } /* End twl_aen_queue_event() */ |
| |
| /* This function will attempt to post a command packet to the board */ |
| static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id) |
| { |
| dma_addr_t command_que_value; |
| |
| command_que_value = tw_dev->command_packet_phys[request_id]; |
| command_que_value += TW_COMMAND_OFFSET; |
| |
| /* First write upper 4 bytes */ |
| writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev)); |
| /* Then the lower 4 bytes */ |
| writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev)); |
| |
| tw_dev->state[request_id] = TW_S_POSTED; |
| tw_dev->posted_request_count++; |
| if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) |
| tw_dev->max_posted_request_count = tw_dev->posted_request_count; |
| |
| return 0; |
| } /* End twl_post_command_packet() */ |
| |
| /* This function will perform a pci-dma mapping for a scatter gather list */ |
| static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id) |
| { |
| int use_sg; |
| struct scsi_cmnd *cmd = tw_dev->srb[request_id]; |
| |
| use_sg = scsi_dma_map(cmd); |
| if (!use_sg) |
| return 0; |
| else if (use_sg < 0) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list"); |
| return 0; |
| } |
| |
| cmd->SCp.phase = TW_PHASE_SGLIST; |
| cmd->SCp.have_data_in = use_sg; |
| |
| return use_sg; |
| } /* End twl_map_scsi_sg_data() */ |
| |
| /* This function hands scsi cdb's to the firmware */ |
| static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg) |
| { |
| TW_Command_Full *full_command_packet; |
| TW_Command_Apache *command_packet; |
| int i, sg_count; |
| struct scsi_cmnd *srb = NULL; |
| struct scatterlist *sglist = NULL, *sg; |
| int retval = 1; |
| |
| if (tw_dev->srb[request_id]) { |
| srb = tw_dev->srb[request_id]; |
| if (scsi_sglist(srb)) |
| sglist = scsi_sglist(srb); |
| } |
| |
| /* Initialize command packet */ |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| full_command_packet->header.header_desc.size_header = 128; |
| full_command_packet->header.status_block.error = 0; |
| full_command_packet->header.status_block.severity__reserved = 0; |
| |
| command_packet = &full_command_packet->command.newcommand; |
| command_packet->status = 0; |
| command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI); |
| |
| /* We forced 16 byte cdb use earlier */ |
| if (!cdb) |
| memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN); |
| else |
| memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN); |
| |
| if (srb) { |
| command_packet->unit = srb->device->id; |
| command_packet->request_id__lunl = |
| cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id)); |
| } else { |
| command_packet->request_id__lunl = |
| cpu_to_le16(TW_REQ_LUN_IN(0, request_id)); |
| command_packet->unit = 0; |
| } |
| |
| command_packet->sgl_offset = 16; |
| |
| if (!sglistarg) { |
| /* Map sglist from scsi layer to cmd packet */ |
| if (scsi_sg_count(srb)) { |
| sg_count = twl_map_scsi_sg_data(tw_dev, request_id); |
| if (sg_count == 0) |
| goto out; |
| |
| scsi_for_each_sg(srb, sg, sg_count, i) { |
| command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg)); |
| command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg)); |
| } |
| command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id]))); |
| } |
| } else { |
| /* Internal cdb post */ |
| for (i = 0; i < use_sg; i++) { |
| command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address); |
| command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length); |
| } |
| command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg)); |
| } |
| |
| /* Update some stats */ |
| if (srb) { |
| tw_dev->sector_count = scsi_bufflen(srb) / 512; |
| if (tw_dev->sector_count > tw_dev->max_sector_count) |
| tw_dev->max_sector_count = tw_dev->sector_count; |
| tw_dev->sgl_entries = scsi_sg_count(srb); |
| if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) |
| tw_dev->max_sgl_entries = tw_dev->sgl_entries; |
| } |
| |
| /* Now post the command to the board */ |
| retval = twl_post_command_packet(tw_dev, request_id); |
| |
| out: |
| return retval; |
| } /* End twl_scsiop_execute_scsi() */ |
| |
| /* This function will read the aen queue from the isr */ |
| static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) |
| { |
| char cdb[TW_MAX_CDB_LEN]; |
| TW_SG_Entry_ISO sglist[1]; |
| TW_Command_Full *full_command_packet; |
| int retval = 1; |
| |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| |
| /* Initialize cdb */ |
| memset(&cdb, 0, TW_MAX_CDB_LEN); |
| cdb[0] = REQUEST_SENSE; /* opcode */ |
| cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ |
| |
| /* Initialize sglist */ |
| memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); |
| sglist[0].length = TW_SECTOR_SIZE; |
| sglist[0].address = tw_dev->generic_buffer_phys[request_id]; |
| |
| /* Mark internal command */ |
| tw_dev->srb[request_id] = NULL; |
| |
| /* Now post the command packet */ |
| if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue"); |
| goto out; |
| } |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_aen_read_queue() */ |
| |
| /* This function will sync firmware time with the host time */ |
| static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id) |
| { |
| u32 schedulertime; |
| struct timeval utc; |
| TW_Command_Full *full_command_packet; |
| TW_Command *command_packet; |
| TW_Param_Apache *param; |
| u32 local_time; |
| |
| /* Fill out the command packet */ |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| command_packet = &full_command_packet->command.oldcommand; |
| command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); |
| command_packet->request_id = request_id; |
| command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); |
| command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); |
| command_packet->size = TW_COMMAND_SIZE; |
| command_packet->byte6_offset.parameter_count = cpu_to_le16(1); |
| |
| /* Setup the param */ |
| param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; |
| memset(param, 0, TW_SECTOR_SIZE); |
| param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */ |
| param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */ |
| param->parameter_size_bytes = cpu_to_le16(4); |
| |
| /* Convert system time in UTC to local time seconds since last |
| Sunday 12:00AM */ |
| do_gettimeofday(&utc); |
| local_time = (u32)(utc.tv_sec - (sys_tz.tz_minuteswest * 60)); |
| schedulertime = local_time - (3 * 86400); |
| schedulertime = cpu_to_le32(schedulertime % 604800); |
| |
| memcpy(param->data, &schedulertime, sizeof(u32)); |
| |
| /* Mark internal command */ |
| tw_dev->srb[request_id] = NULL; |
| |
| /* Now post the command */ |
| twl_post_command_packet(tw_dev, request_id); |
| } /* End twl_aen_sync_time() */ |
| |
| /* This function will assign an available request id */ |
| static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id) |
| { |
| *request_id = tw_dev->free_queue[tw_dev->free_head]; |
| tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; |
| tw_dev->state[*request_id] = TW_S_STARTED; |
| } /* End twl_get_request_id() */ |
| |
| /* This function will free a request id */ |
| static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id) |
| { |
| tw_dev->free_queue[tw_dev->free_tail] = request_id; |
| tw_dev->state[request_id] = TW_S_FINISHED; |
| tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; |
| } /* End twl_free_request_id() */ |
| |
| /* This function will complete an aen request from the isr */ |
| static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id) |
| { |
| TW_Command_Full *full_command_packet; |
| TW_Command *command_packet; |
| TW_Command_Apache_Header *header; |
| unsigned short aen; |
| int retval = 1; |
| |
| header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; |
| tw_dev->posted_request_count--; |
| aen = le16_to_cpu(header->status_block.error); |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| command_packet = &full_command_packet->command.oldcommand; |
| |
| /* First check for internal completion of set param for time sync */ |
| if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) { |
| /* Keep reading the queue in case there are more aen's */ |
| if (twl_aen_read_queue(tw_dev, request_id)) |
| goto out2; |
| else { |
| retval = 0; |
| goto out; |
| } |
| } |
| |
| switch (aen) { |
| case TW_AEN_QUEUE_EMPTY: |
| /* Quit reading the queue if this is the last one */ |
| break; |
| case TW_AEN_SYNC_TIME_WITH_HOST: |
| twl_aen_sync_time(tw_dev, request_id); |
| retval = 0; |
| goto out; |
| default: |
| twl_aen_queue_event(tw_dev, header); |
| |
| /* If there are more aen's, keep reading the queue */ |
| if (twl_aen_read_queue(tw_dev, request_id)) |
| goto out2; |
| else { |
| retval = 0; |
| goto out; |
| } |
| } |
| retval = 0; |
| out2: |
| tw_dev->state[request_id] = TW_S_COMPLETED; |
| twl_free_request_id(tw_dev, request_id); |
| clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); |
| out: |
| return retval; |
| } /* End twl_aen_complete() */ |
| |
| /* This function will poll for a response */ |
| static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds) |
| { |
| unsigned long before; |
| dma_addr_t mfa; |
| u32 regh, regl; |
| u32 response; |
| int retval = 1; |
| int found = 0; |
| |
| before = jiffies; |
| |
| while (!found) { |
| if (sizeof(dma_addr_t) > 4) { |
| regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); |
| regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| mfa = ((u64)regh << 32) | regl; |
| } else |
| mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| |
| response = (u32)mfa; |
| |
| if (TW_RESID_OUT(response) == request_id) |
| found = 1; |
| |
| if (time_after(jiffies, before + HZ * seconds)) |
| goto out; |
| |
| msleep(50); |
| } |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_poll_response() */ |
| |
| /* This function will drain the aen queue */ |
| static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset) |
| { |
| int request_id = 0; |
| char cdb[TW_MAX_CDB_LEN]; |
| TW_SG_Entry_ISO sglist[1]; |
| int finished = 0, count = 0; |
| TW_Command_Full *full_command_packet; |
| TW_Command_Apache_Header *header; |
| unsigned short aen; |
| int first_reset = 0, queue = 0, retval = 1; |
| |
| if (no_check_reset) |
| first_reset = 0; |
| else |
| first_reset = 1; |
| |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| |
| /* Initialize cdb */ |
| memset(&cdb, 0, TW_MAX_CDB_LEN); |
| cdb[0] = REQUEST_SENSE; /* opcode */ |
| cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ |
| |
| /* Initialize sglist */ |
| memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); |
| sglist[0].length = TW_SECTOR_SIZE; |
| sglist[0].address = tw_dev->generic_buffer_phys[request_id]; |
| |
| /* Mark internal command */ |
| tw_dev->srb[request_id] = NULL; |
| |
| do { |
| /* Send command to the board */ |
| if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense"); |
| goto out; |
| } |
| |
| /* Now poll for completion */ |
| if (twl_poll_response(tw_dev, request_id, 30)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue"); |
| tw_dev->posted_request_count--; |
| goto out; |
| } |
| |
| tw_dev->posted_request_count--; |
| header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; |
| aen = le16_to_cpu(header->status_block.error); |
| queue = 0; |
| count++; |
| |
| switch (aen) { |
| case TW_AEN_QUEUE_EMPTY: |
| if (first_reset != 1) |
| goto out; |
| else |
| finished = 1; |
| break; |
| case TW_AEN_SOFT_RESET: |
| if (first_reset == 0) |
| first_reset = 1; |
| else |
| queue = 1; |
| break; |
| case TW_AEN_SYNC_TIME_WITH_HOST: |
| break; |
| default: |
| queue = 1; |
| } |
| |
| /* Now queue an event info */ |
| if (queue) |
| twl_aen_queue_event(tw_dev, header); |
| } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN)); |
| |
| if (count == TW_MAX_AEN_DRAIN) |
| goto out; |
| |
| retval = 0; |
| out: |
| tw_dev->state[request_id] = TW_S_INITIAL; |
| return retval; |
| } /* End twl_aen_drain_queue() */ |
| |
| /* This function will allocate memory and check if it is correctly aligned */ |
| static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) |
| { |
| int i; |
| dma_addr_t dma_handle; |
| unsigned long *cpu_addr; |
| int retval = 1; |
| |
| cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle); |
| if (!cpu_addr) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); |
| goto out; |
| } |
| |
| memset(cpu_addr, 0, size*TW_Q_LENGTH); |
| |
| for (i = 0; i < TW_Q_LENGTH; i++) { |
| switch(which) { |
| case 0: |
| tw_dev->command_packet_phys[i] = dma_handle+(i*size); |
| tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size)); |
| break; |
| case 1: |
| tw_dev->generic_buffer_phys[i] = dma_handle+(i*size); |
| tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); |
| break; |
| case 2: |
| tw_dev->sense_buffer_phys[i] = dma_handle+(i*size); |
| tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size)); |
| break; |
| } |
| } |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_allocate_memory() */ |
| |
| /* This function will load the request id and various sgls for ioctls */ |
| static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length) |
| { |
| TW_Command *oldcommand; |
| TW_Command_Apache *newcommand; |
| TW_SG_Entry_ISO *sgl; |
| unsigned int pae = 0; |
| |
| if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4)) |
| pae = 1; |
| |
| if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) { |
| newcommand = &full_command_packet->command.newcommand; |
| newcommand->request_id__lunl = |
| cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); |
| if (length) { |
| newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); |
| newcommand->sg_list[0].length = TW_CPU_TO_SGL(length); |
| } |
| newcommand->sgl_entries__lunh = |
| cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); |
| } else { |
| oldcommand = &full_command_packet->command.oldcommand; |
| oldcommand->request_id = request_id; |
| |
| if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) { |
| /* Load the sg list */ |
| sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0)); |
| sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); |
| sgl->length = TW_CPU_TO_SGL(length); |
| oldcommand->size += pae; |
| oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0; |
| } |
| } |
| } /* End twl_load_sgl() */ |
| |
| /* This function handles ioctl for the character device |
| This interface is used by smartmontools open source software */ |
| static long twl_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| long timeout; |
| unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0; |
| dma_addr_t dma_handle; |
| int request_id = 0; |
| TW_Ioctl_Driver_Command driver_command; |
| struct inode *inode = file->f_dentry->d_inode; |
| TW_Ioctl_Buf_Apache *tw_ioctl; |
| TW_Command_Full *full_command_packet; |
| TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)]; |
| int retval = -EFAULT; |
| void __user *argp = (void __user *)arg; |
| |
| lock_kernel(); |
| |
| /* Only let one of these through at a time */ |
| if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { |
| retval = -EINTR; |
| goto out; |
| } |
| |
| /* First copy down the driver command */ |
| if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command))) |
| goto out2; |
| |
| /* Check data buffer size */ |
| if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) { |
| retval = -EINVAL; |
| goto out2; |
| } |
| |
| /* Hardware can only do multiple of 512 byte transfers */ |
| data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511; |
| |
| /* Now allocate ioctl buf memory */ |
| cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL); |
| if (!cpu_addr) { |
| retval = -ENOMEM; |
| goto out2; |
| } |
| |
| tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr; |
| |
| /* Now copy down the entire ioctl */ |
| if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1)) |
| goto out3; |
| |
| /* See which ioctl we are doing */ |
| switch (cmd) { |
| case TW_IOCTL_FIRMWARE_PASS_THROUGH: |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| twl_get_request_id(tw_dev, &request_id); |
| |
| /* Flag internal command */ |
| tw_dev->srb[request_id] = NULL; |
| |
| /* Flag chrdev ioctl */ |
| tw_dev->chrdev_request_id = request_id; |
| |
| full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command; |
| |
| /* Load request id and sglist for both command types */ |
| twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted); |
| |
| memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full)); |
| |
| /* Now post the command packet to the controller */ |
| twl_post_command_packet(tw_dev, request_id); |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| |
| timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; |
| |
| /* Now wait for command to complete */ |
| timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); |
| |
| /* We timed out, and didn't get an interrupt */ |
| if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { |
| /* Now we need to reset the board */ |
| printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", |
| tw_dev->host->host_no, TW_DRIVER, 0x6, |
| cmd); |
| retval = -EIO; |
| twl_reset_device_extension(tw_dev, 1); |
| goto out3; |
| } |
| |
| /* Now copy in the command packet response */ |
| memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full)); |
| |
| /* Now complete the io */ |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| tw_dev->posted_request_count--; |
| tw_dev->state[request_id] = TW_S_COMPLETED; |
| twl_free_request_id(tw_dev, request_id); |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| break; |
| default: |
| retval = -ENOTTY; |
| goto out3; |
| } |
| |
| /* Now copy the entire response to userspace */ |
| if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0) |
| retval = 0; |
| out3: |
| /* Now free ioctl buf memory */ |
| dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle); |
| out2: |
| mutex_unlock(&tw_dev->ioctl_lock); |
| out: |
| unlock_kernel(); |
| return retval; |
| } /* End twl_chrdev_ioctl() */ |
| |
| /* This function handles open for the character device */ |
| static int twl_chrdev_open(struct inode *inode, struct file *file) |
| { |
| unsigned int minor_number; |
| int retval = -ENODEV; |
| |
| if (!capable(CAP_SYS_ADMIN)) { |
| retval = -EACCES; |
| goto out; |
| } |
| |
| cycle_kernel_lock(); |
| minor_number = iminor(inode); |
| if (minor_number >= twl_device_extension_count) |
| goto out; |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_chrdev_open() */ |
| |
| /* File operations struct for character device */ |
| static const struct file_operations twl_fops = { |
| .owner = THIS_MODULE, |
| .unlocked_ioctl = twl_chrdev_ioctl, |
| .open = twl_chrdev_open, |
| .release = NULL |
| }; |
| |
| /* This function passes sense data from firmware to scsi layer */ |
| static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host) |
| { |
| TW_Command_Apache_Header *header; |
| TW_Command_Full *full_command_packet; |
| unsigned short error; |
| char *error_str; |
| int retval = 1; |
| |
| header = tw_dev->sense_buffer_virt[i]; |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| |
| /* Get embedded firmware error string */ |
| error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]); |
| |
| /* Don't print error for Logical unit not supported during rollcall */ |
| error = le16_to_cpu(header->status_block.error); |
| if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) { |
| if (print_host) |
| printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", |
| tw_dev->host->host_no, |
| TW_MESSAGE_SOURCE_CONTROLLER_ERROR, |
| header->status_block.error, |
| error_str, |
| header->err_specific_desc); |
| else |
| printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n", |
| TW_MESSAGE_SOURCE_CONTROLLER_ERROR, |
| header->status_block.error, |
| error_str, |
| header->err_specific_desc); |
| } |
| |
| if (copy_sense) { |
| memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH); |
| tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1); |
| goto out; |
| } |
| out: |
| return retval; |
| } /* End twl_fill_sense() */ |
| |
| /* This function will free up device extension resources */ |
| static void twl_free_device_extension(TW_Device_Extension *tw_dev) |
| { |
| if (tw_dev->command_packet_virt[0]) |
| pci_free_consistent(tw_dev->tw_pci_dev, |
| sizeof(TW_Command_Full)*TW_Q_LENGTH, |
| tw_dev->command_packet_virt[0], |
| tw_dev->command_packet_phys[0]); |
| |
| if (tw_dev->generic_buffer_virt[0]) |
| pci_free_consistent(tw_dev->tw_pci_dev, |
| TW_SECTOR_SIZE*TW_Q_LENGTH, |
| tw_dev->generic_buffer_virt[0], |
| tw_dev->generic_buffer_phys[0]); |
| |
| if (tw_dev->sense_buffer_virt[0]) |
| pci_free_consistent(tw_dev->tw_pci_dev, |
| sizeof(TW_Command_Apache_Header)* |
| TW_Q_LENGTH, |
| tw_dev->sense_buffer_virt[0], |
| tw_dev->sense_buffer_phys[0]); |
| |
| kfree(tw_dev->event_queue[0]); |
| } /* End twl_free_device_extension() */ |
| |
| /* This function will get parameter table entries from the firmware */ |
| static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) |
| { |
| TW_Command_Full *full_command_packet; |
| TW_Command *command_packet; |
| TW_Param_Apache *param; |
| void *retval = NULL; |
| |
| /* Setup the command packet */ |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| command_packet = &full_command_packet->command.oldcommand; |
| |
| command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); |
| command_packet->size = TW_COMMAND_SIZE; |
| command_packet->request_id = request_id; |
| command_packet->byte6_offset.block_count = cpu_to_le16(1); |
| |
| /* Now setup the param */ |
| param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; |
| memset(param, 0, TW_SECTOR_SIZE); |
| param->table_id = cpu_to_le16(table_id | 0x8000); |
| param->parameter_id = cpu_to_le16(parameter_id); |
| param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes); |
| |
| command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); |
| command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); |
| |
| /* Post the command packet to the board */ |
| twl_post_command_packet(tw_dev, request_id); |
| |
| /* Poll for completion */ |
| if (twl_poll_response(tw_dev, request_id, 30)) |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param") |
| else |
| retval = (void *)&(param->data[0]); |
| |
| tw_dev->posted_request_count--; |
| tw_dev->state[request_id] = TW_S_INITIAL; |
| |
| return retval; |
| } /* End twl_get_param() */ |
| |
| /* This function will send an initconnection command to controller */ |
| static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits, |
| u32 set_features, unsigned short current_fw_srl, |
| unsigned short current_fw_arch_id, |
| unsigned short current_fw_branch, |
| unsigned short current_fw_build, |
| unsigned short *fw_on_ctlr_srl, |
| unsigned short *fw_on_ctlr_arch_id, |
| unsigned short *fw_on_ctlr_branch, |
| unsigned short *fw_on_ctlr_build, |
| u32 *init_connect_result) |
| { |
| TW_Command_Full *full_command_packet; |
| TW_Initconnect *tw_initconnect; |
| int request_id = 0, retval = 1; |
| |
| /* Initialize InitConnection command packet */ |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| memset(full_command_packet, 0, sizeof(TW_Command_Full)); |
| full_command_packet->header.header_desc.size_header = 128; |
| |
| tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand; |
| tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION); |
| tw_initconnect->request_id = request_id; |
| tw_initconnect->message_credits = cpu_to_le16(message_credits); |
| tw_initconnect->features = set_features; |
| |
| /* Turn on 64-bit sgl support if we need to */ |
| tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0; |
| |
| tw_initconnect->features = cpu_to_le32(tw_initconnect->features); |
| |
| if (set_features & TW_EXTENDED_INIT_CONNECT) { |
| tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED; |
| tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl); |
| tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id); |
| tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch); |
| tw_initconnect->fw_build = cpu_to_le16(current_fw_build); |
| } else |
| tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE; |
| |
| /* Send command packet to the board */ |
| twl_post_command_packet(tw_dev, request_id); |
| |
| /* Poll for completion */ |
| if (twl_poll_response(tw_dev, request_id, 30)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection"); |
| } else { |
| if (set_features & TW_EXTENDED_INIT_CONNECT) { |
| *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl); |
| *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id); |
| *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch); |
| *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build); |
| *init_connect_result = le32_to_cpu(tw_initconnect->result); |
| } |
| retval = 0; |
| } |
| |
| tw_dev->posted_request_count--; |
| tw_dev->state[request_id] = TW_S_INITIAL; |
| |
| return retval; |
| } /* End twl_initconnection() */ |
| |
| /* This function will initialize the fields of a device extension */ |
| static int twl_initialize_device_extension(TW_Device_Extension *tw_dev) |
| { |
| int i, retval = 1; |
| |
| /* Initialize command packet buffers */ |
| if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed"); |
| goto out; |
| } |
| |
| /* Initialize generic buffer */ |
| if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed"); |
| goto out; |
| } |
| |
| /* Allocate sense buffers */ |
| if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed"); |
| goto out; |
| } |
| |
| /* Allocate event info space */ |
| tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL); |
| if (!tw_dev->event_queue[0]) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed"); |
| goto out; |
| } |
| |
| for (i = 0; i < TW_Q_LENGTH; i++) { |
| tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event))); |
| tw_dev->free_queue[i] = i; |
| tw_dev->state[i] = TW_S_INITIAL; |
| } |
| |
| tw_dev->free_head = TW_Q_START; |
| tw_dev->free_tail = TW_Q_START; |
| tw_dev->error_sequence_id = 1; |
| tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| |
| mutex_init(&tw_dev->ioctl_lock); |
| init_waitqueue_head(&tw_dev->ioctl_wqueue); |
| |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_initialize_device_extension() */ |
| |
| /* This function will perform a pci-dma unmap */ |
| static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) |
| { |
| struct scsi_cmnd *cmd = tw_dev->srb[request_id]; |
| |
| if (cmd->SCp.phase == TW_PHASE_SGLIST) |
| scsi_dma_unmap(cmd); |
| } /* End twl_unmap_scsi_data() */ |
| |
| /* This function will handle attention interrupts */ |
| static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev) |
| { |
| int retval = 1; |
| u32 request_id, doorbell; |
| |
| /* Read doorbell status */ |
| doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev)); |
| |
| /* Check for controller errors */ |
| if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing"); |
| goto out; |
| } |
| |
| /* Check if we need to perform an AEN drain */ |
| if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) { |
| if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) { |
| twl_get_request_id(tw_dev, &request_id); |
| if (twl_aen_read_queue(tw_dev, request_id)) { |
| tw_dev->state[request_id] = TW_S_COMPLETED; |
| twl_free_request_id(tw_dev, request_id); |
| clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); |
| } |
| } |
| } |
| |
| retval = 0; |
| out: |
| /* Clear doorbell interrupt */ |
| TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| |
| /* Make sure the clear was flushed by reading it back */ |
| readl(TWL_HOBDBC_REG_ADDR(tw_dev)); |
| |
| return retval; |
| } /* End twl_handle_attention_interrupt() */ |
| |
| /* Interrupt service routine */ |
| static irqreturn_t twl_interrupt(int irq, void *dev_instance) |
| { |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; |
| int i, handled = 0, error = 0; |
| dma_addr_t mfa = 0; |
| u32 reg, regl, regh, response, request_id = 0; |
| struct scsi_cmnd *cmd; |
| TW_Command_Full *full_command_packet; |
| |
| spin_lock(tw_dev->host->host_lock); |
| |
| /* Read host interrupt status */ |
| reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); |
| |
| /* Check if this is our interrupt, otherwise bail */ |
| if (!(reg & TWL_HISTATUS_VALID_INTERRUPT)) |
| goto twl_interrupt_bail; |
| |
| handled = 1; |
| |
| /* If we are resetting, bail */ |
| if (test_bit(TW_IN_RESET, &tw_dev->flags)) |
| goto twl_interrupt_bail; |
| |
| /* Attention interrupt */ |
| if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) { |
| if (twl_handle_attention_interrupt(tw_dev)) { |
| TWL_MASK_INTERRUPTS(tw_dev); |
| goto twl_interrupt_bail; |
| } |
| } |
| |
| /* Response interrupt */ |
| while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) { |
| if (sizeof(dma_addr_t) > 4) { |
| regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); |
| regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| mfa = ((u64)regh << 32) | regl; |
| } else |
| mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); |
| |
| error = 0; |
| response = (u32)mfa; |
| |
| /* Check for command packet error */ |
| if (!TW_NOTMFA_OUT(response)) { |
| for (i=0;i<TW_Q_LENGTH;i++) { |
| if (tw_dev->sense_buffer_phys[i] == mfa) { |
| request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id); |
| if (tw_dev->srb[request_id] != NULL) |
| error = twl_fill_sense(tw_dev, i, request_id, 1, 1); |
| else { |
| /* Skip ioctl error prints */ |
| if (request_id != tw_dev->chrdev_request_id) |
| error = twl_fill_sense(tw_dev, i, request_id, 0, 1); |
| else |
| memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header)); |
| } |
| |
| /* Now re-post the sense buffer */ |
| writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); |
| writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); |
| break; |
| } |
| } |
| } else |
| request_id = TW_RESID_OUT(response); |
| |
| full_command_packet = tw_dev->command_packet_virt[request_id]; |
| |
| /* Check for correct state */ |
| if (tw_dev->state[request_id] != TW_S_POSTED) { |
| if (tw_dev->srb[request_id] != NULL) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted"); |
| TWL_MASK_INTERRUPTS(tw_dev); |
| goto twl_interrupt_bail; |
| } |
| } |
| |
| /* Check for internal command completion */ |
| if (tw_dev->srb[request_id] == NULL) { |
| if (request_id != tw_dev->chrdev_request_id) { |
| if (twl_aen_complete(tw_dev, request_id)) |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt"); |
| } else { |
| tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| wake_up(&tw_dev->ioctl_wqueue); |
| } |
| } else { |
| cmd = tw_dev->srb[request_id]; |
| |
| if (!error) |
| cmd->result = (DID_OK << 16); |
| |
| /* Report residual bytes for single sgl */ |
| if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) { |
| if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id])) |
| scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length); |
| } |
| |
| /* Now complete the io */ |
| tw_dev->state[request_id] = TW_S_COMPLETED; |
| twl_free_request_id(tw_dev, request_id); |
| tw_dev->posted_request_count--; |
| tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); |
| twl_unmap_scsi_data(tw_dev, request_id); |
| } |
| |
| /* Check for another response interrupt */ |
| reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); |
| } |
| |
| twl_interrupt_bail: |
| spin_unlock(tw_dev->host->host_lock); |
| return IRQ_RETVAL(handled); |
| } /* End twl_interrupt() */ |
| |
| /* This function will poll for a register change */ |
| static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds) |
| { |
| unsigned long before; |
| int retval = 1; |
| u32 reg_value; |
| |
| reg_value = readl(reg); |
| before = jiffies; |
| |
| while ((reg_value & value) != result) { |
| reg_value = readl(reg); |
| if (time_after(jiffies, before + HZ * seconds)) |
| goto out; |
| msleep(50); |
| } |
| retval = 0; |
| out: |
| return retval; |
| } /* End twl_poll_register() */ |
| |
| /* This function will reset a controller */ |
| static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) |
| { |
| int retval = 1; |
| int i = 0; |
| u32 status = 0; |
| unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0; |
| unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0; |
| u32 init_connect_result = 0; |
| int tries = 0; |
| int do_soft_reset = soft_reset; |
| |
| while (tries < TW_MAX_RESET_TRIES) { |
| /* Do a soft reset if one is needed */ |
| if (do_soft_reset) { |
| TWL_SOFT_RESET(tw_dev); |
| |
| /* Make sure controller is in a good state */ |
| if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence"); |
| tries++; |
| continue; |
| } |
| if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence"); |
| tries++; |
| continue; |
| } |
| } |
| |
| /* Initconnect */ |
| if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS, |
| TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL, |
| TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH, |
| TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl, |
| &fw_on_ctlr_arch_id, &fw_on_ctlr_branch, |
| &fw_on_ctlr_build, &init_connect_result)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL"); |
| do_soft_reset = 1; |
| tries++; |
| continue; |
| } |
| |
| /* Load sense buffers */ |
| while (i < TW_Q_LENGTH) { |
| writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); |
| writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); |
| |
| /* Check status for over-run after each write */ |
| status = readl(TWL_STATUS_REG_ADDR(tw_dev)); |
| if (!(status & TWL_STATUS_OVERRUN_SUBMIT)) |
| i++; |
| } |
| |
| /* Now check status */ |
| status = readl(TWL_STATUS_REG_ADDR(tw_dev)); |
| if (status) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers"); |
| do_soft_reset = 1; |
| tries++; |
| continue; |
| } |
| |
| /* Drain the AEN queue */ |
| if (twl_aen_drain_queue(tw_dev, soft_reset)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence"); |
| do_soft_reset = 1; |
| tries++; |
| continue; |
| } |
| |
| /* Load rest of compatibility struct */ |
| strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION)); |
| tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL; |
| tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH; |
| tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD; |
| tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL; |
| tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH; |
| tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD; |
| tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl; |
| tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch; |
| tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build; |
| |
| /* If we got here, controller is in a good state */ |
| retval = 0; |
| goto out; |
| } |
| out: |
| return retval; |
| } /* End twl_reset_sequence() */ |
| |
| /* This function will reset a device extension */ |
| static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) |
| { |
| int i = 0, retval = 1; |
| unsigned long flags = 0; |
| |
| /* Block SCSI requests while we are resetting */ |
| if (ioctl_reset) |
| scsi_block_requests(tw_dev->host); |
| |
| set_bit(TW_IN_RESET, &tw_dev->flags); |
| TWL_MASK_INTERRUPTS(tw_dev); |
| TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| |
| spin_lock_irqsave(tw_dev->host->host_lock, flags); |
| |
| /* Abort all requests that are in progress */ |
| for (i = 0; i < TW_Q_LENGTH; i++) { |
| if ((tw_dev->state[i] != TW_S_FINISHED) && |
| (tw_dev->state[i] != TW_S_INITIAL) && |
| (tw_dev->state[i] != TW_S_COMPLETED)) { |
| if (tw_dev->srb[i]) { |
| tw_dev->srb[i]->result = (DID_RESET << 16); |
| tw_dev->srb[i]->scsi_done(tw_dev->srb[i]); |
| twl_unmap_scsi_data(tw_dev, i); |
| } |
| } |
| } |
| |
| /* Reset queues and counts */ |
| for (i = 0; i < TW_Q_LENGTH; i++) { |
| tw_dev->free_queue[i] = i; |
| tw_dev->state[i] = TW_S_INITIAL; |
| } |
| tw_dev->free_head = TW_Q_START; |
| tw_dev->free_tail = TW_Q_START; |
| tw_dev->posted_request_count = 0; |
| |
| spin_unlock_irqrestore(tw_dev->host->host_lock, flags); |
| |
| if (twl_reset_sequence(tw_dev, 1)) |
| goto out; |
| |
| TWL_UNMASK_INTERRUPTS(tw_dev); |
| |
| clear_bit(TW_IN_RESET, &tw_dev->flags); |
| tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; |
| |
| retval = 0; |
| out: |
| if (ioctl_reset) |
| scsi_unblock_requests(tw_dev->host); |
| return retval; |
| } /* End twl_reset_device_extension() */ |
| |
| /* This funciton returns unit geometry in cylinders/heads/sectors */ |
| static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) |
| { |
| int heads, sectors; |
| TW_Device_Extension *tw_dev; |
| |
| tw_dev = (TW_Device_Extension *)sdev->host->hostdata; |
| |
| if (capacity >= 0x200000) { |
| heads = 255; |
| sectors = 63; |
| } else { |
| heads = 64; |
| sectors = 32; |
| } |
| |
| geom[0] = heads; |
| geom[1] = sectors; |
| geom[2] = sector_div(capacity, heads * sectors); /* cylinders */ |
| |
| return 0; |
| } /* End twl_scsi_biosparam() */ |
| |
| /* This is the new scsi eh reset function */ |
| static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt) |
| { |
| TW_Device_Extension *tw_dev = NULL; |
| int retval = FAILED; |
| |
| tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; |
| |
| tw_dev->num_resets++; |
| |
| sdev_printk(KERN_WARNING, SCpnt->device, |
| "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n", |
| TW_DRIVER, 0x2c, SCpnt->cmnd[0]); |
| |
| /* Make sure we are not issuing an ioctl or resetting from ioctl */ |
| mutex_lock(&tw_dev->ioctl_lock); |
| |
| /* Now reset the card and some of the device extension data */ |
| if (twl_reset_device_extension(tw_dev, 0)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset"); |
| goto out; |
| } |
| |
| retval = SUCCESS; |
| out: |
| mutex_unlock(&tw_dev->ioctl_lock); |
| return retval; |
| } /* End twl_scsi_eh_reset() */ |
| |
| /* This is the main scsi queue function to handle scsi opcodes */ |
| static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) |
| { |
| int request_id, retval; |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; |
| |
| /* If we are resetting due to timed out ioctl, report as busy */ |
| if (test_bit(TW_IN_RESET, &tw_dev->flags)) { |
| retval = SCSI_MLQUEUE_HOST_BUSY; |
| goto out; |
| } |
| |
| /* Save done function into scsi_cmnd struct */ |
| SCpnt->scsi_done = done; |
| |
| /* Get a free request id */ |
| twl_get_request_id(tw_dev, &request_id); |
| |
| /* Save the scsi command for use by the ISR */ |
| tw_dev->srb[request_id] = SCpnt; |
| |
| /* Initialize phase to zero */ |
| SCpnt->SCp.phase = TW_PHASE_INITIAL; |
| |
| retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); |
| if (retval) { |
| tw_dev->state[request_id] = TW_S_COMPLETED; |
| twl_free_request_id(tw_dev, request_id); |
| SCpnt->result = (DID_ERROR << 16); |
| done(SCpnt); |
| retval = 0; |
| } |
| out: |
| return retval; |
| } /* End twl_scsi_queue() */ |
| |
| /* This function tells the controller to shut down */ |
| static void __twl_shutdown(TW_Device_Extension *tw_dev) |
| { |
| /* Disable interrupts */ |
| TWL_MASK_INTERRUPTS(tw_dev); |
| |
| /* Free up the IRQ */ |
| free_irq(tw_dev->tw_pci_dev->irq, tw_dev); |
| |
| printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no); |
| |
| /* Tell the card we are shutting down */ |
| if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed"); |
| } else { |
| printk(KERN_WARNING "3w-sas: Shutdown complete.\n"); |
| } |
| |
| /* Clear doorbell interrupt just before exit */ |
| TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| } /* End __twl_shutdown() */ |
| |
| /* Wrapper for __twl_shutdown */ |
| static void twl_shutdown(struct pci_dev *pdev) |
| { |
| struct Scsi_Host *host = pci_get_drvdata(pdev); |
| TW_Device_Extension *tw_dev; |
| |
| if (!host) |
| return; |
| |
| tw_dev = (TW_Device_Extension *)host->hostdata; |
| |
| if (tw_dev->online) |
| __twl_shutdown(tw_dev); |
| } /* End twl_shutdown() */ |
| |
| /* This function configures unit settings when a unit is coming on-line */ |
| static int twl_slave_configure(struct scsi_device *sdev) |
| { |
| /* Force 60 second timeout */ |
| blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); |
| |
| return 0; |
| } /* End twl_slave_configure() */ |
| |
| /* scsi_host_template initializer */ |
| static struct scsi_host_template driver_template = { |
| .module = THIS_MODULE, |
| .name = "3w-sas", |
| .queuecommand = twl_scsi_queue, |
| .eh_host_reset_handler = twl_scsi_eh_reset, |
| .bios_param = twl_scsi_biosparam, |
| .change_queue_depth = twl_change_queue_depth, |
| .can_queue = TW_Q_LENGTH-2, |
| .slave_configure = twl_slave_configure, |
| .this_id = -1, |
| .sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH, |
| .max_sectors = TW_MAX_SECTORS, |
| .cmd_per_lun = TW_MAX_CMDS_PER_LUN, |
| .use_clustering = ENABLE_CLUSTERING, |
| .shost_attrs = twl_host_attrs, |
| .emulated = 1 |
| }; |
| |
| /* This function will probe and initialize a card */ |
| static int __devinit twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) |
| { |
| struct Scsi_Host *host = NULL; |
| TW_Device_Extension *tw_dev; |
| int retval = -ENODEV; |
| int *ptr_phycount, phycount=0; |
| |
| retval = pci_enable_device(pdev); |
| if (retval) { |
| TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device"); |
| goto out_disable_device; |
| } |
| |
| pci_set_master(pdev); |
| pci_try_set_mwi(pdev); |
| |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) |
| || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
| || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask"); |
| retval = -ENODEV; |
| goto out_disable_device; |
| } |
| |
| host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); |
| if (!host) { |
| TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension"); |
| retval = -ENOMEM; |
| goto out_disable_device; |
| } |
| tw_dev = shost_priv(host); |
| |
| /* Save values to device extension */ |
| tw_dev->host = host; |
| tw_dev->tw_pci_dev = pdev; |
| |
| if (twl_initialize_device_extension(tw_dev)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension"); |
| goto out_free_device_extension; |
| } |
| |
| /* Request IO regions */ |
| retval = pci_request_regions(pdev, "3w-sas"); |
| if (retval) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region"); |
| goto out_free_device_extension; |
| } |
| |
| /* Save base address, use region 1 */ |
| tw_dev->base_addr = pci_iomap(pdev, 1, 0); |
| if (!tw_dev->base_addr) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap"); |
| goto out_release_mem_region; |
| } |
| |
| /* Disable interrupts on the card */ |
| TWL_MASK_INTERRUPTS(tw_dev); |
| |
| /* Initialize the card */ |
| if (twl_reset_sequence(tw_dev, 0)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe"); |
| goto out_iounmap; |
| } |
| |
| /* Set host specific parameters */ |
| host->max_id = TW_MAX_UNITS; |
| host->max_cmd_len = TW_MAX_CDB_LEN; |
| host->max_lun = TW_MAX_LUNS; |
| host->max_channel = 0; |
| |
| /* Register the card with the kernel SCSI layer */ |
| retval = scsi_add_host(host, &pdev->dev); |
| if (retval) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed"); |
| goto out_iounmap; |
| } |
| |
| pci_set_drvdata(pdev, host); |
| |
| printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n", |
| host->host_no, |
| (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, |
| TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH), |
| (u64)pci_resource_start(pdev, 1), pdev->irq); |
| |
| ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE, |
| TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH); |
| if (ptr_phycount) |
| phycount = le32_to_cpu(*(int *)ptr_phycount); |
| |
| printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n", |
| host->host_no, |
| (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, |
| TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH), |
| (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE, |
| TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH), |
| phycount); |
| |
| /* Try to enable MSI */ |
| if (use_msi && !pci_enable_msi(pdev)) |
| set_bit(TW_USING_MSI, &tw_dev->flags); |
| |
| /* Now setup the interrupt handler */ |
| retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); |
| if (retval) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ"); |
| goto out_remove_host; |
| } |
| |
| twl_device_extension_list[twl_device_extension_count] = tw_dev; |
| twl_device_extension_count++; |
| |
| /* Re-enable interrupts on the card */ |
| TWL_UNMASK_INTERRUPTS(tw_dev); |
| |
| /* Finally, scan the host */ |
| scsi_scan_host(host); |
| |
| /* Add sysfs binary files */ |
| if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr)) |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read"); |
| if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr)) |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info"); |
| |
| if (twl_major == -1) { |
| if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0) |
| TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device"); |
| } |
| tw_dev->online = 1; |
| return 0; |
| |
| out_remove_host: |
| if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| pci_disable_msi(pdev); |
| scsi_remove_host(host); |
| out_iounmap: |
| iounmap(tw_dev->base_addr); |
| out_release_mem_region: |
| pci_release_regions(pdev); |
| out_free_device_extension: |
| twl_free_device_extension(tw_dev); |
| scsi_host_put(host); |
| out_disable_device: |
| pci_disable_device(pdev); |
| |
| return retval; |
| } /* End twl_probe() */ |
| |
| /* This function is called to remove a device */ |
| static void twl_remove(struct pci_dev *pdev) |
| { |
| struct Scsi_Host *host = pci_get_drvdata(pdev); |
| TW_Device_Extension *tw_dev; |
| |
| if (!host) |
| return; |
| |
| tw_dev = (TW_Device_Extension *)host->hostdata; |
| |
| if (!tw_dev->online) |
| return; |
| |
| /* Remove sysfs binary files */ |
| sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr); |
| sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr); |
| |
| scsi_remove_host(tw_dev->host); |
| |
| /* Unregister character device */ |
| if (twl_major >= 0) { |
| unregister_chrdev(twl_major, "twl"); |
| twl_major = -1; |
| } |
| |
| /* Shutdown the card */ |
| __twl_shutdown(tw_dev); |
| |
| /* Disable MSI if enabled */ |
| if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| pci_disable_msi(pdev); |
| |
| /* Free IO remapping */ |
| iounmap(tw_dev->base_addr); |
| |
| /* Free up the mem region */ |
| pci_release_regions(pdev); |
| |
| /* Free up device extension resources */ |
| twl_free_device_extension(tw_dev); |
| |
| scsi_host_put(tw_dev->host); |
| pci_disable_device(pdev); |
| twl_device_extension_count--; |
| } /* End twl_remove() */ |
| |
| #ifdef CONFIG_PM |
| /* This function is called on PCI suspend */ |
| static int twl_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct Scsi_Host *host = pci_get_drvdata(pdev); |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| |
| printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no); |
| /* Disable interrupts */ |
| TWL_MASK_INTERRUPTS(tw_dev); |
| |
| free_irq(tw_dev->tw_pci_dev->irq, tw_dev); |
| |
| /* Tell the card we are shutting down */ |
| if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend"); |
| } else { |
| printk(KERN_WARNING "3w-sas: Suspend complete.\n"); |
| } |
| |
| /* Clear doorbell interrupt */ |
| TWL_CLEAR_DB_INTERRUPT(tw_dev); |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } /* End twl_suspend() */ |
| |
| /* This function is called on PCI resume */ |
| static int twl_resume(struct pci_dev *pdev) |
| { |
| int retval = 0; |
| struct Scsi_Host *host = pci_get_drvdata(pdev); |
| TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
| |
| printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no); |
| pci_set_power_state(pdev, PCI_D0); |
| pci_enable_wake(pdev, PCI_D0, 0); |
| pci_restore_state(pdev); |
| |
| retval = pci_enable_device(pdev); |
| if (retval) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume"); |
| return retval; |
| } |
| |
| pci_set_master(pdev); |
| pci_try_set_mwi(pdev); |
| |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) |
| || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
| || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume"); |
| retval = -ENODEV; |
| goto out_disable_device; |
| } |
| |
| /* Initialize the card */ |
| if (twl_reset_sequence(tw_dev, 0)) { |
| retval = -ENODEV; |
| goto out_disable_device; |
| } |
| |
| /* Now setup the interrupt handler */ |
| retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); |
| if (retval) { |
| TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume"); |
| retval = -ENODEV; |
| goto out_disable_device; |
| } |
| |
| /* Now enable MSI if enabled */ |
| if (test_bit(TW_USING_MSI, &tw_dev->flags)) |
| pci_enable_msi(pdev); |
| |
| /* Re-enable interrupts on the card */ |
| TWL_UNMASK_INTERRUPTS(tw_dev); |
| |
| printk(KERN_WARNING "3w-sas: Resume complete.\n"); |
| return 0; |
| |
| out_disable_device: |
| scsi_remove_host(host); |
| pci_disable_device(pdev); |
| |
| return retval; |
| } /* End twl_resume() */ |
| #endif |
| |
| /* PCI Devices supported by this driver */ |
| static struct pci_device_id twl_pci_tbl[] __devinitdata = { |
| { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, twl_pci_tbl); |
| |
| /* pci_driver initializer */ |
| static struct pci_driver twl_driver = { |
| .name = "3w-sas", |
| .id_table = twl_pci_tbl, |
| .probe = twl_probe, |
| .remove = twl_remove, |
| #ifdef CONFIG_PM |
| .suspend = twl_suspend, |
| .resume = twl_resume, |
| #endif |
| .shutdown = twl_shutdown |
| }; |
| |
| /* This function is called on driver initialization */ |
| static int __init twl_init(void) |
| { |
| printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); |
| |
| return pci_register_driver(&twl_driver); |
| } /* End twl_init() */ |
| |
| /* This function is called on driver exit */ |
| static void __exit twl_exit(void) |
| { |
| pci_unregister_driver(&twl_driver); |
| } /* End twl_exit() */ |
| |
| module_init(twl_init); |
| module_exit(twl_exit); |
| |