| /* Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| / { |
| qcom,smp2p-modem { |
| compatible = "qcom,smp2p"; |
| reg = <0xfa006000 0x1000>, <0x8 0x0>; |
| reg-names = "irq-reg-base", "irq-reg-offset"; |
| qcom,remote-pid = <1>; |
| qcom,irq-bitmask = <0x4000>; |
| interrupts = <0 27 1>; |
| }; |
| |
| qcom,smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| reg = <0xfa006000 0x1000>, <0x8 0x0>; |
| reg-names = "irq-reg-base", "irq-reg-offset"; |
| qcom,remote-pid = <2>; |
| qcom,irq-bitmask = <0x400>; |
| interrupts = <0 158 1>; |
| }; |
| |
| /* SMP2P Test Driver for inbound entries */ |
| smp2pgpio_smp2p_7_in: qcom,smp2pgpio-smp2p-7-in { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <7>; |
| qcom,is-inbound; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_7_in { |
| compatible = "qcom,smp2pgpio_test_smp2p_7_in"; |
| gpios = <&smp2pgpio_smp2p_7_in 0 0>; |
| }; |
| |
| /* SMP2P Test Driver for outbound entries */ |
| smp2pgpio_smp2p_7_out: qcom,smp2pgpio-smp2p-7-out { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <7>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_7_out { |
| compatible = "qcom,smp2pgpio_test_smp2p_7_out"; |
| gpios = <&smp2pgpio_smp2p_7_out 0 0>; |
| }; |
| |
| /* SMP2P Test Driver for modem inbound */ |
| smp2pgpio_smp2p_1_in: qcom,smp2pgpio-smp2p-1-in { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <1>; |
| qcom,is-inbound; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_1_in { |
| compatible = "qcom,smp2pgpio_test_smp2p_1_in"; |
| gpios = <&smp2pgpio_smp2p_1_in 0 0>; |
| }; |
| |
| /* SMP2P Test Driver for modem output */ |
| smp2pgpio_smp2p_1_out: qcom,smp2pgpio-smp2p-1-out { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_1_out { |
| compatible = "qcom,smp2pgpio_test_smp2p_1_out"; |
| gpios = <&smp2pgpio_smp2p_1_out 0 0>; |
| }; |
| |
| /* SMP2P SSR Driver for inbound entry from modem. */ |
| smp2pgpio_ssr_smp2p_1_in: qcom,smp2pgpio-ssr-smp2p-1-in { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "slave-kernel"; |
| qcom,remote-pid = <1>; |
| qcom,is-inbound; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| /* SMP2P SSR Driver for outbound entry to modem */ |
| smp2pgpio_ssr_smp2p_1_out: qcom,smp2pgpio-ssr-smp2p-1-out { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "master-kernel"; |
| qcom,remote-pid = <1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| /* SMP2P Test Driver for adsp inbound */ |
| smp2pgpio_smp2p_2_in: qcom,smp2pgpio-smp2p-2-in { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <2>; |
| qcom,is-inbound; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_2_in { |
| compatible = "qcom,smp2pgpio_test_smp2p_2_in"; |
| gpios = <&smp2pgpio_smp2p_2_in 0 0>; |
| }; |
| |
| /* SMP2P Test Driver for adsp output */ |
| smp2pgpio_smp2p_2_out: qcom,smp2pgpio-smp2p-2-out { |
| compatible = "qcom,smp2pgpio"; |
| qcom,entry-name = "smp2p"; |
| qcom,remote-pid = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| qcom,smp2pgpio_test_smp2p_2_out { |
| compatible = "qcom,smp2pgpio_test_smp2p_2_out"; |
| gpios = <&smp2pgpio_smp2p_2_out 0 0>; |
| }; |
| }; |