b43: LP-PHY: Update code for spec fixes, and fix a few typos
A few typos have been discovered in both the specs and the code.
This patch fixes them.
Also use lpphy_op_switch_channel consistently, and make all users
of it print its return value for easier debugging.
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index cb6c18d..4d14102 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -552,7 +552,7 @@
B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
B43_WARN_ON(crystalfreq == 0);
- if (crystalfreq >= 30000000) {
+ if (crystalfreq <= 30000000) {
lpphy->pdiv = 1;
b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
} else {
@@ -560,14 +560,16 @@
b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
}
- tmp = (800000000 * lpphy->pdiv + crystalfreq) /
- (32000000 * lpphy->pdiv);
- tmp = (tmp - 1) & 0xFF;
+ tmp = (((800000000 * lpphy->pdiv + crystalfreq) /
+ (2 * crystalfreq)) - 8) & 0xFF;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL7, tmp);
+
+ tmp = (((100 * crystalfreq + 16000000 * lpphy->pdiv) /
+ (32000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
- tmp = (2 * crystalfreq + 1000000 * lpphy->pdiv) /
- (2000000 * lpphy->pdiv);
- tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
+ tmp = (((2 * crystalfreq + 1000000 * lpphy->pdiv) /
+ (2000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);
@@ -671,7 +673,7 @@
b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
udelay(1);
- if (dev->phy.rev < 2) {
+ if (dev->phy.radio_ver == 0x2062) {
lpphy_2062_init(dev);
} else {
lpphy_2063_init(dev);
@@ -688,11 +690,18 @@
static void lpphy_set_rc_cap(struct b43_wldev *dev)
{
- u8 rc_cap = dev->phy.lp->rc_cap;
+ struct b43_phy_lp *lpphy = dev->phy.lp;
- b43_radio_write(dev, B2062_N_RXBB_CALIB2, max_t(u8, rc_cap-4, 0x80));
- b43_radio_write(dev, B2062_N_TX_CTL_A, ((rc_cap & 0x1F) >> 1) | 0x80);
- b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80);
+ u8 rc_cap = (lpphy->rc_cap & 0x1F) >> 1;
+
+ if (dev->phy.rev == 1) //FIXME check channel 14!
+ rc_cap = max_t(u8, rc_cap + 5, 15);
+
+ b43_radio_write(dev, B2062_N_RXBB_CALIB2,
+ max_t(u8, lpphy->rc_cap - 4, 0x80));
+ b43_radio_write(dev, B2062_N_TX_CTL_A, rc_cap | 0x80);
+ b43_radio_write(dev, B2062_S_RXG_CNT16,
+ ((lpphy->rc_cap & 0x1F) >> 2) | 0x80);
}
static u8 lpphy_get_bb_mult(struct b43_wldev *dev)
@@ -1101,6 +1110,9 @@
lpphy_write_tx_pctl_mode_to_hardware(dev);
}
+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel);
+
static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
@@ -1118,11 +1130,16 @@
old_rf2_ovr, old_rf2_ovrval, old_phy_ctl;
enum b43_lpphy_txpctl_mode old_txpctl;
u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;
- int loopback, i, j, inner_sum;
+ int loopback, i, j, inner_sum, err;
memset(&iq_est, 0, sizeof(iq_est));
- b43_switch_channel(dev, 7);
+ err = b43_lpphy_op_switch_channel(dev, 7);
+ if (err) {
+ b43dbg(dev->wl,
+ "RC calib: Failed to switch to channel 7, error = %d",
+ err);
+ }
old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1;
old_bbmult = lpphy_get_bb_mult(dev);
if (old_txg_ovr)
@@ -1881,14 +1898,14 @@
{
struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->dev->bus;
- static const struct b206x_channel *chandata = NULL;
+ const struct b206x_channel *chandata = NULL;
u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
int i, err = 0;
- for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
- if (b2063_chantbl[i].channel == channel) {
- chandata = &b2063_chantbl[i];
+ for (i = 0; i < ARRAY_SIZE(b2062_chantbl); i++) {
+ if (b2062_chantbl[i].channel == channel) {
+ chandata = &b2062_chantbl[i];
break;
}
}