Staging: udlfb: improved rendering performance
Rework rendering for improved performance
Approx 10-20% gain avg across several "benchmarks": x11perf, gtkperf, glxgears
Moves from a single pre-alloc'd urb protected by a long-held mutex
To a list of (4) pre-alloc'd urbs which can be dispatched asynchonously
Improved rendering algorithm to hardware with lower CPU consumption,
fewer system memory accesses, and slightly higher compression.
Better scalability to multiple processors, especially with
multiple framebuffers active.
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 8ee55c8..22f3dc3 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -23,7 +23,6 @@
#include <linux/uaccess.h>
#include <linux/mm.h>
#include <linux/fb.h>
-#include <linux/mutex.h>
#include <linux/vmalloc.h>
#include "udlfb.h"
@@ -88,12 +87,14 @@
}
/*
- * Once you send this command, the DisplayLink framebuffer gets driven to the
- * display.
+ * On/Off for driving the DisplayLink framebuffer to the display
*/
-static char *dlfb_enable_hvsync(char *buf)
+static char *dlfb_enable_hvsync(char *buf, bool enable)
{
- return dlfb_set_register(buf, 0x1F, 0x00);
+ if (enable)
+ return dlfb_set_register(buf, 0x1F, 0x00);
+ else
+ return dlfb_set_register(buf, 0x1F, 0x01);
}
static char *dlfb_set_color_depth(char *buf, u8 selection)
@@ -233,8 +234,15 @@
char *wrptr;
int retval = 0;
int writesize;
+ struct urb *urb;
- buf = dev->buf;
+ if (!atomic_read(&dev->usb_active))
+ return -EPERM;
+
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return -ENOMEM;
+ buf = (char *) urb->transfer_buffer;
/*
* This first section has to do with setting the base address on the
@@ -249,48 +257,16 @@
wrptr = dlfb_set_base8bpp(wrptr, dev->info->fix.smem_len);
wrptr = dlfb_set_vid_cmds(wrptr, var);
- wrptr = dlfb_enable_hvsync(wrptr);
+ wrptr = dlfb_enable_hvsync(wrptr, true);
wrptr = dlfb_vidreg_unlock(wrptr);
writesize = wrptr - buf;
- mutex_lock(&dev->bulk_mutex);
- if (!dev->interface) { /* disconnect() was called */
- mutex_unlock(&dev->bulk_mutex);
- retval = -ENODEV;
- goto error;
- }
+ retval = dlfb_submit_urb(dev, urb, writesize);
- retval = dlfb_bulk_msg(dev, writesize);
- mutex_unlock(&dev->bulk_mutex);
- if (retval) {
- dev_err(&dev->udev->dev, "Problem %d with submit write bulk.\n",
- retval);
- goto error;
- }
-
- return 0;
-
-error:
return retval;
}
-
-/*
- * Query EDID from the handware, then hand it off to fbdev's edid parse
- * routine which should give us back a filled in screeninfo structure.
- */
-static int dlfb_get_var_from_edid(struct dlfb_data *dev,
- struct fb_var_screeninfo *var)
-{
- int ret;
-
- dlfb_edid(dev);
- ret = fb_parse_edid(dev->edid, var);
-
- return ret;
-}
-
static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
unsigned long start = vma->vm_start;
@@ -323,504 +299,333 @@
}
-/* ioctl structure */
-struct dloarea {
- int x, y;
- int w, h;
- int x2, y2;
-};
-
-static struct usb_driver dlfb_driver;
-
-/* thanks to Henrik Bjerregaard Pedersen for this function */
-static char *rle_compress16(uint16_t * src, char *dst, int rem)
+/*
+ * Trims identical data from front and back of line
+ * Sets new front buffer address and width
+ * And returns byte count of identical pixels
+ * Assumes CPU natural alignment (unsigned long)
+ * for back and front buffer ptrs and width
+ */
+static int dlfb_trim_hline(const u8 *bback, const u8 **bfront, int *width_bytes)
{
+ int j, k;
+ const unsigned long *back = (const unsigned long *) bback;
+ const unsigned long *front = (const unsigned long *) *bfront;
+ const int width = *width_bytes / sizeof(unsigned long);
+ int identical = width;
+ int start = width;
+ int end = width;
- int rl;
- uint16_t pix0;
- char *end_if_raw = dst + 6 + 2 * rem;
+ prefetch((void *) front);
+ prefetch((void *) back);
- dst += 6; /* header will be filled in if RLE is worth it */
-
- while (rem && dst < end_if_raw) {
- char *start = (char *)src;
-
- pix0 = *src++;
- rl = 1;
- rem--;
- while (rem && *src == pix0)
- rem--, rl++, src++;
- *dst++ = rl;
- *dst++ = start[1];
- *dst++ = start[0];
+ for (j = 0; j < width; j++) {
+ if (back[j] != front[j]) {
+ start = j;
+ break;
+ }
}
- return dst;
+ for (k = width - 1; k > j; k--) {
+ if (back[k] != front[k]) {
+ end = k+1;
+ break;
+ }
+ }
+
+ identical = start + (width - end);
+ *bfront = (u8 *) &front[start];
+ *width_bytes = (end - start) * sizeof(unsigned long);
+
+ return identical * sizeof(unsigned long);
}
/*
-Thanks to Henrik Bjerregaard Pedersen for rle implementation
-and code refactoring. Next step is huffman compression.
+Render a command stream for an encoded horizontal line segment of pixels.
+
+A command buffer holds several commands.
+It always begins with a fresh command header
+(the protocol doesn't require this, but we enforce it to allow
+multiple buffers to be potentially encoded and sent in parallel).
+A single command encodes one contiguous horizontal line of pixels
+
+The function relies on the client to do all allocation, so that
+rendering can be done directly to output buffers (e.g. USB URBs).
+The function fills the supplied command buffer, providing information
+on where it left off, so the client may call in again with additional
+buffers if the line will take several buffers to complete.
+
+A single command can transmit a maximum of 256 pixels,
+regardless of the compression ratio (protocol design limit).
+To the hardware, 0 for a size byte means 256
+
+Rather than 256 pixel commands which are either rl or raw encoded,
+the rlx command simply assumes alternating raw and rl spans within one cmd.
+This has a slightly larger header overhead, but produces more even results.
+It also processes all data (read and write) in a single pass.
+Performance benchmarks of common cases show it having just slightly better
+compression than 256 pixel raw -or- rle commands, with similar CPU consumpion.
+But for very rl friendly data, will compress not quite as well.
*/
-
-static int
-image_blit(struct dlfb_data *dev_info, int x, int y, int width, int height,
- char *data)
+static void dlfb_compress_hline(
+ const uint16_t **pixel_start_ptr,
+ const uint16_t *const pixel_end,
+ uint32_t *device_address_ptr,
+ uint8_t **command_buffer_ptr,
+ const uint8_t *const cmd_buffer_end)
{
+ const uint16_t *pixel = *pixel_start_ptr;
+ uint32_t dev_addr = *device_address_ptr;
+ uint8_t *cmd = *command_buffer_ptr;
+ const int bpp = 2;
- int i, j, base;
- int rem = width;
- int ret;
+ while ((pixel_end > pixel) &&
+ (cmd_buffer_end - MIN_RLX_CMD_BYTES > cmd)) {
+ uint8_t *raw_pixels_count_byte = 0;
+ uint8_t *cmd_pixels_count_byte = 0;
+ const uint16_t *raw_pixel_start = 0;
+ const uint16_t *cmd_pixel_start, *cmd_pixel_end = 0;
+ const uint32_t be_dev_addr = cpu_to_be32(dev_addr);
- int firstdiff, thistime;
+ prefetchw((void *) cmd); /* pull in one cache line at least */
- char *bufptr;
+ *cmd++ = 0xAF;
+ *cmd++ = 0x6B;
+ *cmd++ = (uint8_t) ((be_dev_addr >> 8) & 0xFF);
+ *cmd++ = (uint8_t) ((be_dev_addr >> 16) & 0xFF);
+ *cmd++ = (uint8_t) ((be_dev_addr >> 24) & 0xFF);
- if (x + width > dev_info->info->var.xres)
- return -EINVAL;
+ cmd_pixels_count_byte = cmd++; /* we'll know this later */
+ cmd_pixel_start = pixel;
- if (y + height > dev_info->info->var.yres)
- return -EINVAL;
+ raw_pixels_count_byte = cmd++; /* we'll know this later */
+ raw_pixel_start = pixel;
- mutex_lock(&dev_info->bulk_mutex);
+ cmd_pixel_end = pixel + min(MAX_CMD_PIXELS + 1,
+ min((int)(pixel_end - pixel),
+ (int)(cmd_buffer_end - cmd) / bpp));
- base =
- dev_info->base16 + ((dev_info->info->var.xres * 2 * y) + (x * 2));
+ prefetch_range((void *) pixel, (cmd_pixel_end - pixel) * bpp);
- data += (dev_info->info->var.xres * 2 * y) + (x * 2);
+ while (pixel < cmd_pixel_end) {
+ const uint16_t * const repeating_pixel = pixel;
- /* printk("IMAGE_BLIT\n"); */
+ *(uint16_t *)cmd = cpu_to_be16p(pixel);
+ cmd += 2;
+ pixel++;
- bufptr = dev_info->buf;
+ if (unlikely((pixel < cmd_pixel_end) &&
+ (*pixel == *repeating_pixel))) {
+ /* go back and fill in raw pixel count */
+ *raw_pixels_count_byte = ((repeating_pixel -
+ raw_pixel_start) + 1) & 0xFF;
- for (i = y; i < y + height; i++) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- rem = width;
-
- /* printk("WRITING LINE %d\n", i); */
-
- while (rem) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret =
- dlfb_bulk_msg(dev_info,
- bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
- /* number of pixels to consider this time */
- thistime = rem;
- if (thistime > 255)
- thistime = 255;
-
- if (dev_info->backing_buffer) {
- /* find first pixel that has changed */
- firstdiff = -1;
- for (j = 0; j < thistime * 2; j++) {
- if (dev_info->backing_buffer
- [base - dev_info->base16 + j]
- != data[j]) {
- firstdiff = j / 2;
- break;
- }
+ while ((pixel < cmd_pixel_end)
+ && (*pixel == *repeating_pixel)) {
+ pixel++;
}
- } else {
- firstdiff = 0;
+ /* immediately after raw data is repeat byte */
+ *cmd++ = ((pixel - repeating_pixel) - 1) & 0xFF;
+ /* Then start another raw pixel span */
+ raw_pixel_start = pixel;
+ raw_pixels_count_byte = cmd++;
}
-
- if (firstdiff >= 0) {
- char *end_of_rle;
-
- end_of_rle =
- rle_compress16((uint16_t *) (data +
- firstdiff * 2),
- bufptr,
- thistime - firstdiff);
-
- if (end_of_rle <
- bufptr + 6 + 2 * (thistime - firstdiff)) {
- bufptr[0] = 0xAF;
- bufptr[1] = 0x69;
-
- bufptr[2] =
- (char)((base +
- firstdiff * 2) >> 16);
- bufptr[3] =
- (char)((base + firstdiff * 2) >> 8);
- bufptr[4] =
- (char)(base + firstdiff * 2);
- bufptr[5] = thistime - firstdiff;
-
- bufptr = end_of_rle;
-
- } else {
- /* fallback to raw (or other?) */
- *bufptr++ = 0xAF;
- *bufptr++ = 0x68;
-
- *bufptr++ =
- (char)((base +
- firstdiff * 2) >> 16);
- *bufptr++ =
- (char)((base + firstdiff * 2) >> 8);
- *bufptr++ =
- (char)(base + firstdiff * 2);
- *bufptr++ = thistime - firstdiff;
- for (j = firstdiff * 2;
- j < thistime * 2; j += 2) {
- *bufptr++ = data[j + 1];
- *bufptr++ = data[j];
- }
- }
- }
-
- base += thistime * 2;
- data += thistime * 2;
- rem -= thistime;
}
- if (dev_info->backing_buffer)
- memcpy(dev_info->backing_buffer +
- (base - dev_info->base16) -
- (width * 2), data - (width * 2), width * 2);
+ if (pixel > raw_pixel_start) {
+ /* finalize last RAW span */
+ *raw_pixels_count_byte = (pixel-raw_pixel_start) & 0xFF;
+ }
- base += (dev_info->info->var.xres * 2) - (width * 2);
- data += (dev_info->info->var.xres * 2) - (width * 2);
-
+ *cmd_pixels_count_byte = (pixel - cmd_pixel_start) & 0xFF;
+ dev_addr += (pixel - cmd_pixel_start) * bpp;
}
- if (bufptr > dev_info->buf) {
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+ if (cmd_buffer_end <= MIN_RLX_CMD_BYTES + cmd) {
+ /* Fill leftover bytes with no-ops */
+ if (cmd_buffer_end > cmd)
+ memset(cmd, 0xAF, cmd_buffer_end - cmd);
+ cmd = (uint8_t *) cmd_buffer_end;
}
- mutex_unlock(&dev_info->bulk_mutex);
+ *command_buffer_ptr = cmd;
+ *pixel_start_ptr = pixel;
+ *device_address_ptr = dev_addr;
- return base;
-
+ return;
}
-static int
-draw_rect(struct dlfb_data *dev_info, int x, int y, int width, int height,
- unsigned char red, unsigned char green, unsigned char blue)
+/*
+ * There are 3 copies of every pixel: The front buffer that the fbdev
+ * client renders to, the actual framebuffer across the USB bus in hardware
+ * (that we can only write to, slowly, and can never read), and (optionally)
+ * our shadow copy that tracks what's been sent to that hardware buffer.
+ */
+static void dlfb_render_hline(struct dlfb_data *dev, struct urb **urb_ptr,
+ const char *front, char **urb_buf_ptr,
+ u32 byte_offset, u32 byte_width,
+ int *ident_ptr, int *sent_ptr)
{
+ const u8 *line_start, *line_end, *next_pixel;
+ u32 dev_addr = dev->base16 + byte_offset;
+ struct urb *urb = *urb_ptr;
+ u8 *cmd = *urb_buf_ptr;
+ u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length;
- int i, j, base;
- int ret;
- unsigned short col =
- (((((red) & 0xF8) | ((green) >> 5)) & 0xFF) << 8) +
- (((((green) & 0x1C) << 3) | ((blue) >> 3)) & 0xFF);
- int rem = width;
+ line_start = (u8 *) (front + byte_offset);
+ next_pixel = line_start;
+ line_end = next_pixel + byte_width;
- char *bufptr;
+ if (dev->backing_buffer) {
+ int offset;
+ const u8 *back_start = (u8 *) (dev->backing_buffer
+ + byte_offset);
- if (x + width > dev_info->info->var.xres)
- return -EINVAL;
+ *ident_ptr += dlfb_trim_hline(back_start, &next_pixel,
+ &byte_width);
- if (y + height > dev_info->info->var.yres)
- return -EINVAL;
+ offset = next_pixel - line_start;
+ line_end = next_pixel + byte_width;
+ dev_addr += offset;
+ back_start += offset;
+ line_start += offset;
- mutex_lock(&dev_info->bulk_mutex);
-
- base = dev_info->base16 + (dev_info->info->var.xres * 2 * y) + (x * 2);
-
- bufptr = dev_info->buf;
-
- for (i = y; i < y + height; i++) {
-
- if (dev_info->backing_buffer) {
- for (j = 0; j < width * 2; j += 2) {
- dev_info->backing_buffer
- [base - dev_info->base16 + j] =
- (char)(col >> 8);
- dev_info->backing_buffer
- [base - dev_info->base16 + j + 1] =
- (char)(col);
- }
- }
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- rem = width;
-
- while (rem) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret =
- dlfb_bulk_msg(dev_info,
- bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- *bufptr++ = 0xAF;
- *bufptr++ = 0x69;
-
- *bufptr++ = (char)(base >> 16);
- *bufptr++ = (char)(base >> 8);
- *bufptr++ = (char)(base);
-
- if (rem > 255) {
- *bufptr++ = 255;
- *bufptr++ = 255;
- rem -= 255;
- base += 255 * 2;
- } else {
- *bufptr++ = rem;
- *bufptr++ = rem;
- base += rem * 2;
- rem = 0;
- }
-
- *bufptr++ = (char)(col >> 8);
- *bufptr++ = (char)(col);
-
- }
-
- base += (dev_info->info->var.xres * 2) - (width * 2);
-
+ memcpy((char *)back_start, (char *) line_start,
+ byte_width);
}
- if (bufptr > dev_info->buf)
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+ while (next_pixel < line_end) {
- mutex_unlock(&dev_info->bulk_mutex);
+ dlfb_compress_hline((const uint16_t **) &next_pixel,
+ (const uint16_t *) line_end, &dev_addr,
+ (u8 **) &cmd, (u8 *) cmd_end);
- return 1;
+ if (cmd >= cmd_end) {
+ int len = cmd - (u8 *) urb->transfer_buffer;
+ if (dlfb_submit_urb(dev, urb, len))
+ return; /* lost pixels is set */
+ *sent_ptr += len;
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return; /* lost_pixels is set */
+ *urb_ptr = urb;
+ cmd = urb->transfer_buffer;
+ cmd_end = &cmd[urb->transfer_buffer_length];
+ }
+ }
+
+ *urb_buf_ptr = cmd;
}
-static void swapfb(struct dlfb_data *dev_info)
+int dlfb_handle_damage(struct dlfb_data *dev, int x, int y,
+ int width, int height, char *data)
{
-
- int tmpbase;
- char *bufptr;
-
- mutex_lock(&dev_info->bulk_mutex);
-
- tmpbase = dev_info->base16;
-
- dev_info->base16 = dev_info->base16d;
- dev_info->base16d = tmpbase;
-
- bufptr = dev_info->buf;
-
- bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
-
- /* set addresses */
- bufptr =
- dlfb_set_register(bufptr, 0x20, (char)(dev_info->base16 >> 16));
- bufptr = dlfb_set_register(bufptr, 0x21, (char)(dev_info->base16 >> 8));
- bufptr = dlfb_set_register(bufptr, 0x22, (char)(dev_info->base16));
-
- bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
-
- dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
-
- mutex_unlock(&dev_info->bulk_mutex);
-}
-
-static int copyfb(struct dlfb_data *dev_info)
-{
- int base;
- int source;
- int rem;
int i, ret;
+ char *cmd;
+ cycles_t start_cycles, end_cycles;
+ int bytes_sent = 0;
+ int bytes_identical = 0;
+ struct urb *urb;
+ int aligned_x;
- char *bufptr;
+ start_cycles = get_cycles();
- base = dev_info->base16d;
+ aligned_x = DL_ALIGN_DOWN(x, sizeof(unsigned long));
+ width = DL_ALIGN_UP(width + (x-aligned_x), sizeof(unsigned long));
+ x = aligned_x;
- mutex_lock(&dev_info->bulk_mutex);
-
- source = dev_info->base16;
-
- bufptr = dev_info->buf;
-
- for (i = 0; i < dev_info->info->var.yres; i++) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- rem = dev_info->info->var.xres;
-
- while (rem) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret =
- dlfb_bulk_msg(dev_info,
- bufptr - dev_info->buf);
- bufptr = dev_info->buf;
-
- }
-
- *bufptr++ = 0xAF;
- *bufptr++ = 0x6A;
-
- *bufptr++ = (char)(base >> 16);
- *bufptr++ = (char)(base >> 8);
- *bufptr++ = (char)(base);
-
- if (rem > 255) {
- *bufptr++ = 255;
- *bufptr++ = (char)(source >> 16);
- *bufptr++ = (char)(source >> 8);
- *bufptr++ = (char)(source);
-
- rem -= 255;
- base += 255 * 2;
- source += 255 * 2;
-
- } else {
- *bufptr++ = rem;
- *bufptr++ = (char)(source >> 16);
- *bufptr++ = (char)(source >> 8);
- *bufptr++ = (char)(source);
-
- base += rem * 2;
- source += rem * 2;
- rem = 0;
- }
- }
- }
-
- if (bufptr > dev_info->buf)
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
-
- mutex_unlock(&dev_info->bulk_mutex);
-
- return 1;
-
-}
-
-static int
-copyarea(struct dlfb_data *dev_info, int dx, int dy, int sx, int sy,
- int width, int height)
-{
- int base;
- int source;
- int rem;
- int i, ret;
-
- char *bufptr;
-
- if (dx + width > dev_info->info->var.xres)
+ if ((width <= 0) ||
+ (x + width > dev->info->var.xres) ||
+ (y + height > dev->info->var.yres))
return -EINVAL;
- if (dy + height > dev_info->info->var.yres)
- return -EINVAL;
+ if (!atomic_read(&dev->usb_active))
+ return 0;
- mutex_lock(&dev_info->bulk_mutex);
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return 0;
+ cmd = urb->transfer_buffer;
- base =
- dev_info->base16 + (dev_info->info->var.xres * 2 * dy) + (dx * 2);
- source = (dev_info->info->var.xres * 2 * sy) + (sx * 2);
+ for (i = y; i < y + height ; i++) {
+ const int line_offset = dev->info->fix.line_length * i;
+ const int byte_offset = line_offset + (x * BPP);
- bufptr = dev_info->buf;
-
- for (i = sy; i < sy + height; i++) {
-
- memcpy(dev_info->backing_buffer + base - dev_info->base16,
- dev_info->backing_buffer + source, width * 2);
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- rem = width;
-
- while (rem) {
-
- if (dev_info->bufend - bufptr < BUF_HIGH_WATER_MARK) {
- ret =
- dlfb_bulk_msg(dev_info,
- bufptr - dev_info->buf);
- bufptr = dev_info->buf;
- }
-
- *bufptr++ = 0xAF;
- *bufptr++ = 0x6A;
-
- *bufptr++ = (char)(base >> 16);
- *bufptr++ = (char)(base >> 8);
- *bufptr++ = (char)(base);
-
- if (rem > 255) {
- *bufptr++ = 255;
- *bufptr++ = (char)(source >> 16);
- *bufptr++ = (char)(source >> 8);
- *bufptr++ = (char)(source);
-
- rem -= 255;
- base += 255 * 2;
- source += 255 * 2;
-
- } else {
- *bufptr++ = rem;
- *bufptr++ = (char)(source >> 16);
- *bufptr++ = (char)(source >> 8);
- *bufptr++ = (char)(source);
-
- base += rem * 2;
- source += rem * 2;
- rem = 0;
- }
- }
-
- base += (dev_info->info->var.xres * 2) - (width * 2);
- source += (dev_info->info->var.xres * 2) - (width * 2);
+ dlfb_render_hline(dev, &urb, (char *) dev->info->fix.smem_start,
+ &cmd, byte_offset, width * BPP,
+ &bytes_identical, &bytes_sent);
}
- if (bufptr > dev_info->buf)
- ret = dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+ if (cmd > (char *) urb->transfer_buffer) {
+ /* Send partial buffer remaining before exiting */
+ int len = cmd - (char *) urb->transfer_buffer;
+ ret = dlfb_submit_urb(dev, urb, len);
+ bytes_sent += len;
+ } else
+ dlfb_urb_completion(urb);
- mutex_unlock(&dev_info->bulk_mutex);
+ atomic_add(bytes_sent, &dev->bytes_sent);
+ atomic_add(bytes_identical, &dev->bytes_identical);
+ atomic_add(width*height*2, &dev->bytes_rendered);
+ end_cycles = get_cycles();
+ atomic_add(((unsigned int) ((end_cycles - start_cycles)
+ >> 10)), /* Kcycles */
+ &dev->cpu_kcycles_used);
- return 1;
+ return 0;
}
+/* hardware has native COPY command (see libdlo), but not worth it for fbcon */
static void dlfb_ops_copyarea(struct fb_info *info,
- const struct fb_copyarea *area)
+ const struct fb_copyarea *area)
{
+
struct dlfb_data *dev = info->par;
- copyarea(dev, area->dx, area->dy, area->sx, area->sy, area->width,
- area->height);
+#if defined CONFIG_FB_SYS_COPYAREA || defined CONFIG_FB_SYS_COPYAREA_MODULE
+
+ sys_copyarea(info, area);
+
+ dlfb_handle_damage(dev, area->dx, area->dy,
+ area->width, area->height, info->screen_base);
+#endif
+ atomic_inc(&dev->copy_count);
+
}
static void dlfb_ops_imageblit(struct fb_info *info,
- const struct fb_image *image)
+ const struct fb_image *image)
{
- int ret;
struct dlfb_data *dev = info->par;
- cfb_imageblit(info, image);
- ret =
- image_blit(dev, image->dx, image->dy, image->width, image->height,
- info->screen_base);
+
+#if defined CONFIG_FB_SYS_IMAGEBLIT || defined CONFIG_FB_SYS_IMAGEBLIT_MODULE
+
+ sys_imageblit(info, image);
+
+ dlfb_handle_damage(dev, image->dx, image->dy,
+ image->width, image->height, info->screen_base);
+
+#endif
+
+ atomic_inc(&dev->blit_count);
}
static void dlfb_ops_fillrect(struct fb_info *info,
- const struct fb_fillrect *region)
+ const struct fb_fillrect *rect)
{
-
- unsigned char red, green, blue;
struct dlfb_data *dev = info->par;
- memcpy(&red, ®ion->color, 1);
- memcpy(&green, ®ion->color + 1, 1);
- memcpy(&blue, ®ion->color + 2, 1);
- draw_rect(dev, region->dx, region->dy, region->width, region->height,
- red, green, blue);
- /* printk("FILL RECT %d %d !!!\n", region->dx, region->dy); */
+#if defined CONFIG_FB_SYS_FILLRECT || defined CONFIG_FB_SYS_FILLRECT_MODULE
+
+ sys_fillrect(info, rect);
+
+ dlfb_handle_damage(dev, rect->dx, rect->dy, rect->width,
+ rect->height, info->screen_base);
+#endif
+
+ atomic_inc(&dev->fill_count);
}
@@ -840,21 +645,26 @@
}
static int dlfb_ops_ioctl(struct fb_info *info, unsigned int cmd,
- unsigned long arg)
+ unsigned long arg)
{
- struct dlfb_data *dev_info = info->par;
+
+ struct dlfb_data *dev = info->par;
struct dloarea *area = NULL;
- if (cmd == 0xAD) {
+ if (!atomic_read(&dev->usb_active))
+ return 0;
+
+ /* TODO: Update X server to get this from sysfs instead */
+ if (cmd == DLFB_IOCTL_RETURN_EDID) {
char *edid = (char *)arg;
- dlfb_edid(dev_info);
- if (copy_to_user(edid, dev_info->edid, 128)) {
+ dlfb_get_edid(dev);
+ if (copy_to_user(edid, dev->edid, sizeof(dev->edid)))
return -EFAULT;
- }
return 0;
}
- if (cmd == 0xAA || cmd == 0xAB || cmd == 0xAC) {
+ /* TODO: Help propose a standard fb.h ioctl to report mmap damage */
+ if (cmd == DLFB_IOCTL_REPORT_DAMAGE) {
area = (struct dloarea *)arg;
@@ -869,29 +679,14 @@
if (area->y > info->var.yres)
area->y = info->var.yres;
- }
- if (cmd == 0xAA) {
- image_blit(dev_info, area->x, area->y, area->w, area->h,
+ atomic_set(&dev->use_defio, 0);
+
+ dlfb_handle_damage(dev, area->x, area->y, area->w, area->h,
info->screen_base);
+ atomic_inc(&dev->damage_count);
}
- if (cmd == 0xAC) {
- copyfb(dev_info);
- image_blit(dev_info, area->x, area->y, area->w, area->h,
- info->screen_base);
- swapfb(dev_info);
- } else if (cmd == 0xAB) {
- if (area->x2 < 0)
- area->x2 = 0;
-
- if (area->y2 < 0)
- area->y2 = 0;
-
- copyarea(dev_info,
- area->x2, area->y2, area->x, area->y, area->w,
- area->h);
- }
return 0;
}
@@ -925,8 +720,6 @@
static int dlfb_ops_release(struct fb_info *info, int user)
{
struct dlfb_data *dev_info = info->par;
- image_blit(dev_info, 0, 0, info->var.xres, info->var.yres,
- info->screen_base);
return 0;
}
@@ -1026,18 +819,28 @@
static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
{
- struct dlfb_data *dev_info = info->par;
- char *bufptr = dev_info->buf;
+ struct dlfb_data *dev = info->par;
+ char *bufptr;
+ struct urb *urb;
- bufptr = dlfb_set_register(bufptr, 0xFF, 0x00);
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return 0;
+ bufptr = (char *) urb->transfer_buffer;
+
+ /* overloading usb_active. UNBLANK can conflict with teardown */
+
+ bufptr = dlfb_vidreg_lock(bufptr);
if (blank_mode != FB_BLANK_UNBLANK) {
- bufptr = dlfb_set_register(bufptr, 0x1F, 0x01);
+ atomic_set(&dev->usb_active, 0);
+ bufptr = dlfb_enable_hvsync(bufptr, false);
} else {
- bufptr = dlfb_set_register(bufptr, 0x1F, 0x00);
+ atomic_set(&dev->usb_active, 1);
+ bufptr = dlfb_enable_hvsync(bufptr, true);
}
- bufptr = dlfb_set_register(bufptr, 0xFF, 0xFF);
+ bufptr = dlfb_vidreg_unlock(bufptr);
- dlfb_bulk_msg(dev_info, bufptr - dev_info->buf);
+ dlfb_submit_urb(dev, urb, bufptr - (char *) urb->transfer_buffer);
return 0;
}
@@ -1312,8 +1115,6 @@
kref_init(&dev->kref); /* matching kref_put in usb .disconnect fn */
kref_get(&dev->kref); /* matching kref_put in .fb_destroy function*/
- mutex_init(&dev->bulk_mutex);
-
dev->udev = usbdev;
dev->gdev = &usbdev->dev; /* our generic struct device * */
usb_set_intfdata(interface, dev);
@@ -1326,22 +1127,6 @@
mutex_init(&dev->fb_open_lock);
- /*
- * TODO: replace single 64K buffer with buffer list
- * and async dispatch
- */
- dev->buf = kmalloc(BUF_SIZE, GFP_KERNEL);
- if (dev->buf == NULL) {
- dl_err("unable to allocate memory for dlfb commands\n");
- goto error;
- }
- dev->bufend = dev->buf + BUF_SIZE;
-
- dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
- usb_fill_bulk_urb(dev->tx_urb, dev->udev,
- usb_sndbulkpipe(dev->udev, 1), dev->buf, 0,
- dlfb_bulk_callback, dev);
-
/* We don't register a new USB class. Our client interface is fbdev */
/* allocates framebuffer driver structure, not framebuffer memory */
@@ -1420,14 +1205,13 @@
dlfb_ops_set_par(info);
/* paint greenscreen */
-/*
pix_framebuffer = (u16 *) videomemory;
for (i = 0; i < videomemorysize / 2; i++)
pix_framebuffer[i] = 0x37e6;
dlfb_handle_damage(dev, 0, 0, info->var.xres, info->var.yres,
videomemory);
-*/
+
retval = register_framebuffer(info);
if (retval < 0) {
dl_err("register_framebuffer failed %d\n", retval);