[ARM] pxa: add basic support for Voipac PXA270 SBC
This patch adds basic support for the Voipac PXA270 SBC.
The device consists of the following hardware:
- PXA270 @ 520 MHz
- 256MB RAM (sparsemem, 2*128MB regions)
- 64MB NOR flash
- 640x480 LCD
- Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
new file mode 100644
index 0000000..710a17c
--- /dev/null
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -0,0 +1,305 @@
+/*
+ * Hardware definitions for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/vpac270.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long vpac270_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO53_GPIO, /* SD detect */
+ GPIO52_GPIO, /* SD r/o switch */
+
+ /* GPIO KEYS */
+ GPIO1_GPIO, /* USER BTN */
+
+ /* LEDs */
+ GPIO15_GPIO, /* orange led */
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+ GPIO27_FFUART_RTS,
+ GPIO100_FFUART_CTS,
+ GPIO33_FFUART_DSR,
+ GPIO40_FFUART_DTR,
+ GPIO10_FFUART_DCD,
+ GPIO38_FFUART_RI,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO86_LCD_LDD_16,
+ GPIO87_LCD_LDD_17,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition vpac270_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data vpac270_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = vpac270_partitions,
+ .nr_parts = ARRAY_SIZE(vpac270_partitions)
+ }
+};
+
+static struct resource vpac270_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vpac270_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &vpac270_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = vpac270_flash_data,
+ },
+};
+static void __init vpac270_nor_init(void)
+{
+ platform_device_register(&vpac270_flash);
+}
+#else
+static inline void vpac270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data vpac270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
+ .gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
+ .detect_delay = 20,
+};
+
+static void __init vpac270_mmc_init(void)
+{
+ pxa_set_mci_info(&vpac270_mci_platform_data);
+}
+#else
+static inline void vpac270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button vpac270_pxa_buttons[] = {
+ {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
+};
+
+static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
+ .buttons = vpac270_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons),
+};
+
+static struct platform_device vpac270_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_pxa_keys_data,
+ },
+};
+
+static void __init vpac270_keys_init(void)
+{
+ platform_device_register(&vpac270_pxa_keys);
+}
+#else
+static inline void vpac270_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led vpac270_gpio_leds[] = {
+{
+ .name = "vpac270:orange:user",
+ .default_trigger = "none",
+ .gpio = GPIO15_VPAC270_LED_ORANGE,
+ .active_low = 1,
+}
+};
+
+static struct gpio_led_platform_data vpac270_gpio_led_info = {
+ .leds = vpac270_gpio_leds,
+ .num_leds = ARRAY_SIZE(vpac270_gpio_leds),
+};
+
+static struct platform_device vpac270_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_gpio_led_info,
+ }
+};
+
+static void __init vpac270_leds_init(void)
+{
+ platform_device_register(&vpac270_leds);
+}
+#else
+static inline void vpac270_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info vpac270_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 144,
+ .right_margin = 32,
+ .upper_margin = 13,
+ .lower_margin = 30,
+
+ .hsync_len = 32,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info vpac270_lcd_screen = {
+ .modes = vpac270_lcd_modes,
+ .num_modes = ARRAY_SIZE(vpac270_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+};
+
+static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
+}
+
+static void __init vpac270_lcd_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
+ set_pxa_fb_info(&vpac270_lcd_screen);
+ return;
+
+err2:
+ gpio_free(GPIO81_VPAC270_BKL_ON);
+err:
+ return;
+}
+#else
+static inline void vpac270_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init vpac270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ vpac270_lcd_init();
+ vpac270_mmc_init();
+ vpac270_nor_init();
+ vpac270_leds_init();
+ vpac270_keys_init();
+}
+
+MACHINE_START(VPAC270, "Voipac PXA270")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = vpac270_init
+MACHINE_END