[PATCH] Rewritten backlight infrastructure for portable Apple computers
This patch contains a total rewrite of the backlight infrastructure for
portable Apple computers. Backward compatibility is retained. A sysfs
interface allows userland to control the brightness with more steps than
before. Userland is allowed to upload a brightness curve for different
monitors, similar to Mac OS X.
[akpm@osdl.org: add needed exports]
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5a2840a..168ede7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -86,6 +86,11 @@
combination with certain motherboards and monitors are known to
suffer from this problem.
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ default n
+
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
@@ -717,6 +722,16 @@
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
@@ -755,6 +770,16 @@
of debugging informations to provide to the maintainer when
something goes wrong.
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86_32
@@ -993,6 +1018,7 @@
There is a product page at
http://apps.ati.com/ATIcompare/
+
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
@@ -1000,6 +1026,16 @@
help
Say Y here if you want DDC/I2C support for your Radeon board.
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
@@ -1024,6 +1060,16 @@
To compile this driver as a module, choose M here: the
module will be called aty128fb.
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128 && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
depends on FB && !SPARC32
@@ -1066,6 +1112,16 @@
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY && PPC_PMAC
+ select FB_BACKLIGHT
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_S3TRIO
bool "S3 Trio display support"
depends on (FB = y) && PPC && BROKEN
diff --git a/drivers/video/aty/Makefile b/drivers/video/aty/Makefile
index 1852139..a6cc0e9 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/aty/Makefile
@@ -10,5 +10,6 @@
radeonfb-y := radeon_base.o radeon_pm.o radeon_monitor.o radeon_accel.o
radeonfb-$(CONFIG_FB_RADEON_I2C) += radeon_i2c.o
+radeonfb-$(CONFIG_FB_RADEON_BACKLIGHT) += radeon_backlight.o
radeonfb-objs := $(radeonfb-y)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index f7bbff4..db878fd 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -64,6 +64,7 @@
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/console.h>
+#include <linux/backlight.h>
#include <asm/io.h>
#ifdef CONFIG_PPC_PMAC
@@ -480,16 +481,6 @@
.fb_imageblit = cfb_imageblit,
};
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int aty128_set_backlight_enable(int on, int level, void* data);
-static int aty128_set_backlight_level(int level, void* data);
-
-static struct backlight_controller aty128_backlight_controller = {
- aty128_set_backlight_enable,
- aty128_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
/*
* Functions to read from/write to the mmio registers
* - endian conversions may possibly be avoided by
@@ -1258,19 +1249,35 @@
static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
{
u32 reg;
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+#endif
if (on) {
reg = aty_ld_le32(LVDS_GEN_CNTL);
reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION;
reg &= ~LVDS_DISPLAY_DIS;
aty_st_le32(LVDS_GEN_CNTL, reg);
-#ifdef CONFIG_PMAC_BACKLIGHT
- aty128_set_backlight_enable(get_backlight_enable(),
- get_backlight_level(), par);
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
+ }
+ mutex_unlock(&info->bl_mutex);
#endif
} else {
-#ifdef CONFIG_PMAC_BACKLIGHT
- aty128_set_backlight_enable(0, 0, par);
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->brightness = 0;
+ info->bl_dev->props->power = FB_BLANK_POWERDOWN;
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
+ }
+ mutex_unlock(&info->bl_mutex);
#endif
reg = aty_ld_le32(LVDS_GEN_CNTL);
reg |= LVDS_DISPLAY_DIS;
@@ -1691,6 +1698,184 @@
}
#endif /* MODULE */
+/* Backlight */
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+#define MAX_LEVEL 0xFF
+
+static struct backlight_properties aty128_bl_data;
+
+static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
+ int level)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int atylevel;
+
+ /* Get and convert the value */
+ mutex_lock(&info->bl_mutex);
+ atylevel = MAX_LEVEL -
+ (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ if (atylevel < 0)
+ atylevel = 0;
+ else if (atylevel > MAX_LEVEL)
+ atylevel = MAX_LEVEL;
+
+ return atylevel;
+}
+
+/* We turn off the LCD completely instead of just dimming the backlight.
+ * This provides greater power saving and the display is useless without
+ * backlight anyway
+ */
+#define BACKLIGHT_LVDS_OFF
+/* That one prevents proper CRT output with LCD off */
+#undef BACKLIGHT_DAC_OFF
+
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+ struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+ unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
+ int level;
+
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK ||
+ !par->lcd_on)
+ level = 0;
+ else
+ level = bd->props->brightness;
+
+ reg |= LVDS_BL_MOD_EN | LVDS_BLON;
+ if (level > 0) {
+ reg |= LVDS_DIGION;
+ if (!(reg & LVDS_ON)) {
+ reg &= ~LVDS_BLON;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ aty_ld_le32(LVDS_GEN_CNTL);
+ mdelay(10);
+ reg |= LVDS_BLON;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ }
+ reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+ reg |= (aty128_bl_get_level_brightness(par, level) << LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+ reg |= LVDS_ON | LVDS_EN;
+ reg &= ~LVDS_DISPLAY_DIS;
+#endif
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN));
+#endif
+ } else {
+ reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+ reg |= (aty128_bl_get_level_brightness(par, 0) << LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+ reg |= LVDS_DISPLAY_DIS;
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+ aty_ld_le32(LVDS_GEN_CNTL);
+ udelay(10);
+ reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION);
+#endif
+ aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+ aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN);
+#endif
+ }
+
+ return 0;
+}
+
+static int aty128_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props->brightness;
+}
+
+static struct backlight_properties aty128_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = aty128_bl_get_brightness,
+ .update_status = aty128_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
+};
+
+static void aty128_bl_init(struct aty128fb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ struct backlight_device *bd;
+ char name[12];
+
+ /* Could be extended to Rage128Pro LVDS output too */
+ if (par->chip_gen != rage_M3)
+ return;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!pmac_has_backlight_type("ati"))
+ return;
+#endif
+
+ snprintf(name, sizeof(name), "aty128bl%d", info->node);
+
+ bd = backlight_device_register(name, par, &aty128_bl_data);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk("aty128: Backlight registration failed\n");
+ goto error;
+ }
+
+ mutex_lock(&info->bl_mutex);
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 63 * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ up(&bd->sem);
+ bd->props->brightness = aty128_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ down(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("aty128: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+static void aty128_bl_exit(struct aty128fb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ backlight_device_unregister(info->bl_dev);
+ info->bl_dev = NULL;
+
+ printk("aty128: Backlight unloaded\n");
+ }
+ mutex_unlock(&info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
+#endif /* CONFIG_FB_ATY128_BACKLIGHT */
/*
* Initialisation
@@ -1835,17 +2020,15 @@
if (register_framebuffer(info) < 0)
return 0;
-#ifdef CONFIG_PMAC_BACKLIGHT
- /* Could be extended to Rage128Pro LVDS output too */
- if (par->chip_gen == rage_M3)
- register_backlight_controller(&aty128_backlight_controller, par, "ati");
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
-
+
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ aty128_bl_init(par);
+#endif
+
printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
info->node, info->fix.id, video_card);
@@ -1981,6 +2164,10 @@
par = info->par;
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ aty128_bl_exit(par);
+#endif
+
unregister_framebuffer(info);
#ifdef CONFIG_MTRR
if (par->mtrr.vram_valid)
@@ -2011,10 +2198,14 @@
if (par->lock_blank || par->asleep)
return 0;
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank)
- set_backlight_enable(0);
-#endif /* CONFIG_PMAC_BACKLIGHT */
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ if (machine_is(powermac) && blank) {
+ down(&fb->bl_dev->sem);
+ fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
+ fb->bl_dev->props->update_status(fb->bl_dev);
+ up(&fb->bl_dev->sem);
+ }
+#endif
if (blank & FB_BLANK_VSYNC_SUSPEND)
state |= 2;
@@ -2029,10 +2220,14 @@
aty128_set_crt_enable(par, par->crt_on && !blank);
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && !blank)
- set_backlight_enable(1);
-#endif /* CONFIG_PMAC_BACKLIGHT */
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+ if (machine_is(powermac) && !blank) {
+ down(&fb->bl_dev->sem);
+ fb->bl_dev->props->power = FB_BLANK_UNBLANK;
+ fb->bl_dev->props->update_status(fb->bl_dev);
+ up(&fb->bl_dev->sem);
+ }
+#endif
return 0;
}
@@ -2138,73 +2333,6 @@
return -EINVAL;
}
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int backlight_conv[] = {
- 0xff, 0xc0, 0xb5, 0xaa, 0x9f, 0x94, 0x89, 0x7e,
- 0x73, 0x68, 0x5d, 0x52, 0x47, 0x3c, 0x31, 0x24
-};
-
-/* We turn off the LCD completely instead of just dimming the backlight.
- * This provides greater power saving and the display is useless without
- * backlight anyway
- */
-#define BACKLIGHT_LVDS_OFF
-/* That one prevents proper CRT output with LCD off */
-#undef BACKLIGHT_DAC_OFF
-
-static int aty128_set_backlight_enable(int on, int level, void *data)
-{
- struct aty128fb_par *par = data;
- unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
-
- if (!par->lcd_on)
- on = 0;
- reg |= LVDS_BL_MOD_EN | LVDS_BLON;
- if (on && level > BACKLIGHT_OFF) {
- reg |= LVDS_DIGION;
- if (!(reg & LVDS_ON)) {
- reg &= ~LVDS_BLON;
- aty_st_le32(LVDS_GEN_CNTL, reg);
- (void)aty_ld_le32(LVDS_GEN_CNTL);
- mdelay(10);
- reg |= LVDS_BLON;
- aty_st_le32(LVDS_GEN_CNTL, reg);
- }
- reg &= ~LVDS_BL_MOD_LEVEL_MASK;
- reg |= (backlight_conv[level] << LVDS_BL_MOD_LEVEL_SHIFT);
-#ifdef BACKLIGHT_LVDS_OFF
- reg |= LVDS_ON | LVDS_EN;
- reg &= ~LVDS_DISPLAY_DIS;
-#endif
- aty_st_le32(LVDS_GEN_CNTL, reg);
-#ifdef BACKLIGHT_DAC_OFF
- aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN));
-#endif
- } else {
- reg &= ~LVDS_BL_MOD_LEVEL_MASK;
- reg |= (backlight_conv[0] << LVDS_BL_MOD_LEVEL_SHIFT);
-#ifdef BACKLIGHT_LVDS_OFF
- reg |= LVDS_DISPLAY_DIS;
- aty_st_le32(LVDS_GEN_CNTL, reg);
- (void)aty_ld_le32(LVDS_GEN_CNTL);
- udelay(10);
- reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION);
-#endif
- aty_st_le32(LVDS_GEN_CNTL, reg);
-#ifdef BACKLIGHT_DAC_OFF
- aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN);
-#endif
- }
-
- return 0;
-}
-
-static int aty128_set_backlight_level(int level, void* data)
-{
- return aty128_set_backlight_enable(1, level, data);
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
#if 0
/*
* Accelerated functions
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index e9b7a64..43d2cb5 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -151,6 +151,7 @@
int lock_blank;
unsigned long res_start;
unsigned long res_size;
+ struct pci_dev *pdev;
#ifdef __sparc__
struct pci_mmap_map *mmap_map;
u8 mmaped;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index c054bb2..c5185f7 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,7 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
+#include <linux/backlight.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -2115,45 +2116,142 @@
#endif /* defined(CONFIG_PM) && defined(CONFIG_PCI) */
-#ifdef CONFIG_PMAC_BACKLIGHT
+/* Backlight */
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+#define MAX_LEVEL 0xFF
- /*
- * LCD backlight control
- */
+static struct backlight_properties aty_bl_data;
-static int backlight_conv[] = {
- 0x00, 0x3f, 0x4c, 0x59, 0x66, 0x73, 0x80, 0x8d,
- 0x9a, 0xa7, 0xb4, 0xc1, 0xcf, 0xdc, 0xe9, 0xff
-};
-
-static int aty_set_backlight_enable(int on, int level, void *data)
+static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
{
- struct fb_info *info = (struct fb_info *) data;
- struct atyfb_par *par = (struct atyfb_par *) info->par;
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int atylevel;
+
+ /* Get and convert the value */
+ mutex_lock(&info->bl_mutex);
+ atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
+ mutex_unlock(&info->bl_mutex);
+
+ if (atylevel < 0)
+ atylevel = 0;
+ else if (atylevel > MAX_LEVEL)
+ atylevel = MAX_LEVEL;
+
+ return atylevel;
+}
+
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+ struct atyfb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
+ int level;
+
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK)
+ level = 0;
+ else
+ level = bd->props->brightness;
reg |= (BLMOD_EN | BIASMOD_EN);
- if (on && level > BACKLIGHT_OFF) {
+ if (level > 0) {
reg &= ~BIAS_MOD_LEVEL_MASK;
- reg |= (backlight_conv[level] << BIAS_MOD_LEVEL_SHIFT);
+ reg |= (aty_bl_get_level_brightness(par, level) << BIAS_MOD_LEVEL_SHIFT);
} else {
reg &= ~BIAS_MOD_LEVEL_MASK;
- reg |= (backlight_conv[0] << BIAS_MOD_LEVEL_SHIFT);
+ reg |= (aty_bl_get_level_brightness(par, 0) << BIAS_MOD_LEVEL_SHIFT);
}
aty_st_lcd(LCD_MISC_CNTL, reg, par);
+
return 0;
}
-static int aty_set_backlight_level(int level, void *data)
+static int aty_bl_get_brightness(struct backlight_device *bd)
{
- return aty_set_backlight_enable(1, level, data);
+ return bd->props->brightness;
}
-static struct backlight_controller aty_backlight_controller = {
- aty_set_backlight_enable,
- aty_set_backlight_level
+static struct backlight_properties aty_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = aty_bl_get_brightness,
+ .update_status = aty_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
-#endif /* CONFIG_PMAC_BACKLIGHT */
+
+static void aty_bl_init(struct atyfb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ struct backlight_device *bd;
+ char name[12];
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!pmac_has_backlight_type("ati"))
+ return;
+#endif
+
+ snprintf(name, sizeof(name), "atybl%d", info->node);
+
+ bd = backlight_device_register(name, par, &aty_bl_data);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk("aty: Backlight registration failed\n");
+ goto error;
+ }
+
+ mutex_lock(&info->bl_mutex);
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ up(&bd->sem);
+ bd->props->brightness = aty_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ down(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("aty: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+static void aty_bl_exit(struct atyfb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ backlight_device_unregister(info->bl_dev);
+
+ printk("aty: Backlight unloaded\n");
+ }
+ mutex_unlock(&info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
+
+#endif /* CONFIG_FB_ATY_BACKLIGHT */
static void __init aty_calc_mem_refresh(struct atyfb_par *par, int xclk)
{
@@ -2513,9 +2611,13 @@
/* these bits let the 101 powerbook wake up from sleep -- paulus */
aty_st_lcd(POWER_MANAGEMENT, aty_ld_lcd(POWER_MANAGEMENT, par)
| (USE_F32KHZ | TRISTATE_MEM_EN), par);
- } else if (M64_HAS(MOBIL_BUS))
- register_backlight_controller(&aty_backlight_controller, info, "ati");
-#endif /* CONFIG_PMAC_BACKLIGHT */
+ } else
+#endif
+ if (M64_HAS(MOBIL_BUS)) {
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ aty_bl_init (par);
+#endif
+ }
memset(&var, 0, sizeof(var));
#ifdef CONFIG_PPC
@@ -2674,8 +2776,16 @@
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
- set_backlight_enable(0);
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->power = FB_BLANK_POWERDOWN;
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
+ }
+ mutex_unlock(&info->bl_mutex);
+ }
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -2706,8 +2816,16 @@
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
- set_backlight_enable(1);
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->power = FB_BLANK_UNBLANK;
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
+ }
+ mutex_unlock(&info->bl_mutex);
+ }
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -3440,6 +3558,7 @@
par->res_start = res_start;
par->res_size = res_size;
par->irq = pdev->irq;
+ par->pdev = pdev;
/* Setup "info" structure */
#ifdef __sparc__
@@ -3571,6 +3690,11 @@
aty_set_crtc(par, &saved_crtc);
par->pll_ops->set_pll(info, &saved_pll);
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ if (M64_HAS(MOBIL_BUS))
+ aty_bl_exit(par);
+#endif
+
unregister_framebuffer(info);
#ifdef CONFIG_MTRR
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
new file mode 100644
index 0000000..7de66b8
--- /dev/null
+++ b/drivers/video/aty/radeon_backlight.c
@@ -0,0 +1,247 @@
+/*
+ * Backlight code for ATI Radeon based graphic cards
+ *
+ * Copyright (c) 2000 Ani Joshi <ajoshi@kernel.crashing.org>
+ * Copyright (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (c) 2006 Michael Hanselmann <linux-kernel@hansmi.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "radeonfb.h"
+#include <linux/backlight.h>
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+
+#define MAX_RADEON_LEVEL 0xFF
+
+static struct backlight_properties radeon_bl_data;
+
+struct radeon_bl_privdata {
+ struct radeonfb_info *rinfo;
+ uint8_t negative;
+};
+
+static int radeon_bl_get_level_brightness(struct radeon_bl_privdata *pdata,
+ int level)
+{
+ struct fb_info *info = pdata->rinfo->info;
+ int rlevel;
+
+ mutex_lock(&info->bl_mutex);
+
+ /* Get and convert the value */
+ rlevel = pdata->rinfo->info->bl_curve[level] *
+ FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL;
+
+ mutex_unlock(&info->bl_mutex);
+
+ if (pdata->negative)
+ rlevel = MAX_RADEON_LEVEL - rlevel;
+
+ if (rlevel < 0)
+ rlevel = 0;
+ else if (rlevel > MAX_RADEON_LEVEL)
+ rlevel = MAX_RADEON_LEVEL;
+
+ return rlevel;
+}
+
+static int radeon_bl_update_status(struct backlight_device *bd)
+{
+ struct radeon_bl_privdata *pdata = class_get_devdata(&bd->class_dev);
+ struct radeonfb_info *rinfo = pdata->rinfo;
+ u32 lvds_gen_cntl, tmpPixclksCntl;
+ int level;
+
+ if (rinfo->mon1_type != MT_LCD)
+ return 0;
+
+ /* We turn off the LCD completely instead of just dimming the
+ * backlight. This provides some greater power saving and the display
+ * is useless without backlight anyway.
+ */
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK)
+ level = 0;
+ else
+ level = bd->props->brightness;
+
+ del_timer_sync(&rinfo->lvds_timer);
+ radeon_engine_idle();
+
+ lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
+ if (level > 0) {
+ lvds_gen_cntl &= ~LVDS_DISPLAY_DIS;
+ if (!(lvds_gen_cntl & LVDS_BLON) || !(lvds_gen_cntl & LVDS_ON)) {
+ lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_DIGON);
+ lvds_gen_cntl |= LVDS_BLON | LVDS_EN;
+ OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
+ lvds_gen_cntl |=
+ (radeon_bl_get_level_brightness(pdata, level) <<
+ LVDS_BL_MOD_LEVEL_SHIFT);
+ lvds_gen_cntl |= LVDS_ON;
+ lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_BL_MOD_EN);
+ rinfo->pending_lvds_gen_cntl = lvds_gen_cntl;
+ mod_timer(&rinfo->lvds_timer,
+ jiffies + msecs_to_jiffies(rinfo->panel_info.pwr_delay));
+ } else {
+ lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
+ lvds_gen_cntl |=
+ (radeon_bl_get_level_brightness(pdata, level) <<
+ LVDS_BL_MOD_LEVEL_SHIFT);
+ OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
+ }
+ rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
+ rinfo->init_state.lvds_gen_cntl |= rinfo->pending_lvds_gen_cntl
+ & LVDS_STATE_MASK;
+ } else {
+ /* Asic bug, when turning off LVDS_ON, we have to make sure
+ RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off
+ */
+ tmpPixclksCntl = INPLL(PIXCLKS_CNTL);
+ if (rinfo->is_mobility || rinfo->is_IGP)
+ OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb);
+ lvds_gen_cntl &= ~(LVDS_BL_MOD_LEVEL_MASK | LVDS_BL_MOD_EN);
+ lvds_gen_cntl |= (radeon_bl_get_level_brightness(pdata, 0) <<
+ LVDS_BL_MOD_LEVEL_SHIFT);
+ lvds_gen_cntl |= LVDS_DISPLAY_DIS;
+ OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
+ udelay(100);
+ lvds_gen_cntl &= ~(LVDS_ON | LVDS_EN);
+ OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(LVDS_DIGON);
+ rinfo->pending_lvds_gen_cntl = lvds_gen_cntl;
+ mod_timer(&rinfo->lvds_timer,
+ jiffies + msecs_to_jiffies(rinfo->panel_info.pwr_delay));
+ if (rinfo->is_mobility || rinfo->is_IGP)
+ OUTPLL(PIXCLKS_CNTL, tmpPixclksCntl);
+ }
+ rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
+ rinfo->init_state.lvds_gen_cntl |= (lvds_gen_cntl & LVDS_STATE_MASK);
+
+ return 0;
+}
+
+static int radeon_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props->brightness;
+}
+
+static struct backlight_properties radeon_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = radeon_bl_get_brightness,
+ .update_status = radeon_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
+};
+
+void radeonfb_bl_init(struct radeonfb_info *rinfo)
+{
+ struct backlight_device *bd;
+ struct radeon_bl_privdata *pdata;
+ char name[12];
+
+ if (rinfo->mon1_type != MT_LCD)
+ return;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!pmac_has_backlight_type("ati") &&
+ !pmac_has_backlight_type("mnca"))
+ return;
+#endif
+
+ pdata = kmalloc(sizeof(struct radeon_bl_privdata), GFP_KERNEL);
+ if (!pdata) {
+ printk("radeonfb: Memory allocation failed\n");
+ goto error;
+ }
+
+ snprintf(name, sizeof(name), "radeonbl%d", rinfo->info->node);
+
+ bd = backlight_device_register(name, pdata, &radeon_bl_data);
+ if (IS_ERR(bd)) {
+ rinfo->info->bl_dev = NULL;
+ printk("radeonfb: Backlight registration failed\n");
+ goto error;
+ }
+
+ pdata->rinfo = rinfo;
+
+ /* Pardon me for that hack... maybe some day we can figure out in what
+ * direction backlight should work on a given panel?
+ */
+ pdata->negative =
+ (rinfo->family != CHIP_FAMILY_RV200 &&
+ rinfo->family != CHIP_FAMILY_RV250 &&
+ rinfo->family != CHIP_FAMILY_RV280 &&
+ rinfo->family != CHIP_FAMILY_RV350);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ pdata->negative = pdata->negative ||
+ machine_is_compatible("PowerBook4,3") ||
+ machine_is_compatible("PowerBook6,3") ||
+ machine_is_compatible("PowerBook6,5");
+#endif
+
+ mutex_lock(&rinfo->info->bl_mutex);
+ rinfo->info->bl_dev = bd;
+ fb_bl_default_curve(rinfo->info, 0,
+ 63 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL,
+ 217 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL);
+ mutex_unlock(&rinfo->info->bl_mutex);
+
+ up(&bd->sem);
+ bd->props->brightness = radeon_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ down(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("radeonfb: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ kfree(pdata);
+ return;
+}
+
+void radeonfb_bl_exit(struct radeonfb_info *rinfo)
+{
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&rinfo->info->bl_mutex);
+ if (rinfo->info->bl_dev) {
+ struct radeon_bl_privdata *pdata;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == rinfo->info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ pdata = class_get_devdata(&rinfo->info->bl_dev->class_dev);
+ backlight_device_unregister(rinfo->info->bl_dev);
+ kfree(pdata);
+ rinfo->info->bl_dev = NULL;
+
+ printk("radeonfb: Backlight unloaded\n");
+ }
+ mutex_unlock(&rinfo->info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 387a18a..c5ecbb0 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -78,10 +78,6 @@
#include <asm/pci-bridge.h>
#include "../macmodes.h"
-#ifdef CONFIG_PMAC_BACKLIGHT
-#include <asm/backlight.h>
-#endif
-
#ifdef CONFIG_BOOTX_TEXT
#include <asm/btext.h>
#endif
@@ -277,20 +273,6 @@
* prototypes
*/
-
-#ifdef CONFIG_PPC_OF
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int radeon_set_backlight_enable(int on, int level, void *data);
-static int radeon_set_backlight_level(int level, void *data);
-static struct backlight_controller radeon_backlight_controller = {
- radeon_set_backlight_enable,
- radeon_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-#endif /* CONFIG_PPC_OF */
-
static void radeon_unmap_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev)
{
if (!rinfo->bios_seg)
@@ -1913,116 +1895,6 @@
return 0;
}
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-
-/* TODO: Dbl check these tables, we don't go up to full ON backlight
- * in these, possibly because we noticed MacOS doesn't, but I'd prefer
- * having some more official numbers from ATI
- */
-static int backlight_conv_m6[] = {
- 0xff, 0xc0, 0xb5, 0xaa, 0x9f, 0x94, 0x89, 0x7e,
- 0x73, 0x68, 0x5d, 0x52, 0x47, 0x3c, 0x31, 0x24
-};
-static int backlight_conv_m7[] = {
- 0x00, 0x3f, 0x4a, 0x55, 0x60, 0x6b, 0x76, 0x81,
- 0x8c, 0x97, 0xa2, 0xad, 0xb8, 0xc3, 0xce, 0xd9
-};
-
-#define BACKLIGHT_LVDS_OFF
-#undef BACKLIGHT_DAC_OFF
-
-/* We turn off the LCD completely instead of just dimming the backlight.
- * This provides some greater power saving and the display is useless
- * without backlight anyway.
- */
-static int radeon_set_backlight_enable(int on, int level, void *data)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- u32 lvds_gen_cntl, tmpPixclksCntl;
- int* conv_table;
-
- if (rinfo->mon1_type != MT_LCD)
- return 0;
-
- /* Pardon me for that hack... maybe some day we can figure
- * out in what direction backlight should work on a given
- * panel ?
- */
- if ((rinfo->family == CHIP_FAMILY_RV200 ||
- rinfo->family == CHIP_FAMILY_RV250 ||
- rinfo->family == CHIP_FAMILY_RV280 ||
- rinfo->family == CHIP_FAMILY_RV350) &&
- !machine_is_compatible("PowerBook4,3") &&
- !machine_is_compatible("PowerBook6,3") &&
- !machine_is_compatible("PowerBook6,5"))
- conv_table = backlight_conv_m7;
- else
- conv_table = backlight_conv_m6;
-
- del_timer_sync(&rinfo->lvds_timer);
- radeon_engine_idle();
-
- lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
- if (on && (level > BACKLIGHT_OFF)) {
- lvds_gen_cntl &= ~LVDS_DISPLAY_DIS;
- if (!(lvds_gen_cntl & LVDS_BLON) || !(lvds_gen_cntl & LVDS_ON)) {
- lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_DIGON);
- lvds_gen_cntl |= LVDS_BLON | LVDS_EN;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[level] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= LVDS_ON;
- lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_BL_MOD_EN);
- rinfo->pending_lvds_gen_cntl = lvds_gen_cntl;
- mod_timer(&rinfo->lvds_timer,
- jiffies + msecs_to_jiffies(rinfo->panel_info.pwr_delay));
- } else {
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[level] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- }
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |= rinfo->pending_lvds_gen_cntl
- & LVDS_STATE_MASK;
- } else {
- /* Asic bug, when turning off LVDS_ON, we have to make sure
- RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off
- */
- tmpPixclksCntl = INPLL(PIXCLKS_CNTL);
- if (rinfo->is_mobility || rinfo->is_IGP)
- OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb);
- lvds_gen_cntl &= ~(LVDS_BL_MOD_LEVEL_MASK | LVDS_BL_MOD_EN);
- lvds_gen_cntl |= (conv_table[0] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= LVDS_DISPLAY_DIS;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- udelay(100);
- lvds_gen_cntl &= ~(LVDS_ON | LVDS_EN);
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- lvds_gen_cntl &= ~(LVDS_DIGON);
- rinfo->pending_lvds_gen_cntl = lvds_gen_cntl;
- mod_timer(&rinfo->lvds_timer,
- jiffies + msecs_to_jiffies(rinfo->panel_info.pwr_delay));
- if (rinfo->is_mobility || rinfo->is_IGP)
- OUTPLL(PIXCLKS_CNTL, tmpPixclksCntl);
- }
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |= (lvds_gen_cntl & LVDS_STATE_MASK);
-
- return 0;
-}
-
-
-static int radeon_set_backlight_level(int level, void *data)
-{
- return radeon_set_backlight_enable(1, level, data);
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-
/*
* This reconfigure the card's internal memory map. In theory, we'd like
* to setup the card's memory at the same address as it's PCI bus address,
@@ -2477,14 +2349,7 @@
MTRR_TYPE_WRCOMB, 1);
#endif
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->mon1_type == MT_LCD) {
- register_backlight_controller(&radeon_backlight_controller,
- rinfo, "ati");
- register_backlight_controller(&radeon_backlight_controller,
- rinfo, "mnca");
- }
-#endif
+ radeonfb_bl_init(rinfo);
printk ("radeonfb (%s): %s\n", pci_name(rinfo->pdev), rinfo->name);
@@ -2528,7 +2393,8 @@
if (!rinfo)
return;
-
+
+ radeonfb_bl_exit(rinfo);
radeonfb_pm_exit(rinfo);
if (rinfo->mon1_EDID)
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 217e00a..1645943 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -625,4 +625,13 @@
extern void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
int reg_only);
+/* Backlight functions */
+#ifdef CONFIG_FB_RADEON_BACKLIGHT
+extern void radeonfb_bl_init(struct radeonfb_info *rinfo);
+extern void radeonfb_bl_exit(struct radeonfb_info *rinfo);
+#else
+static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {}
+static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {}
+#endif
+
#endif /* __RADEONFB_H__ */
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index 72ff6bf..d76bbfac 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -148,9 +148,24 @@
static int chipsfb_blank(int blank, struct fb_info *info)
{
#ifdef CONFIG_PMAC_BACKLIGHT
- // used to disable backlight only for blank > 1, but it seems
- // useful at blank = 1 too (saves battery, extends backlight life)
- set_backlight_enable(!blank);
+ mutex_lock(&pmac_backlight_mutex);
+
+ if (pmac_backlight) {
+ down(&pmac_backlight->sem);
+
+ /* used to disable backlight only for blank > 1, but it seems
+ * useful at blank = 1 too (saves battery, extends backlight
+ * life)
+ */
+ if (blank)
+ pmac_backlight->props->power = FB_BLANK_POWERDOWN;
+ else
+ pmac_backlight->props->power = FB_BLANK_UNBLANK;
+ pmac_backlight->props->update_status(pmac_backlight);
+ up(&pmac_backlight->sem);
+ }
+
+ mutex_unlock(&pmac_backlight_mutex);
#endif /* CONFIG_PMAC_BACKLIGHT */
return 1; /* get fb_blank to set the colormap to all black */
@@ -401,7 +416,14 @@
#ifdef CONFIG_PMAC_BACKLIGHT
/* turn on the backlight */
- set_backlight_enable(1);
+ mutex_lock(&pmac_backlight_mutex);
+ if (pmac_backlight) {
+ down(&pmac_backlight->sem);
+ pmac_backlight->props->power = FB_BLANK_UNBLANK;
+ pmac_backlight->props->update_status(pmac_backlight);
+ up(&pmac_backlight->sem);
+ }
+ mutex_unlock(&pmac_backlight_mutex);
#endif /* CONFIG_PMAC_BACKLIGHT */
#ifdef CONFIG_PPC
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index 34e0739..3ceb8c1 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/fb.h>
#include <linux/console.h>
+#include <linux/module.h>
/**
* framebuffer_alloc - creates a new frame buffer info structure
@@ -55,6 +56,10 @@
info->device = dev;
+#ifdef CONFIG_FB_BACKLIGHT
+ mutex_init(&info->bl_mutex);
+#endif
+
return info;
#undef PADDING
#undef BYTES_PER_LONG
@@ -414,6 +419,65 @@
return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state);
}
+#ifdef CONFIG_FB_BACKLIGHT
+static ssize_t store_bl_curve(struct class_device *class_device,
+ const char *buf, size_t count)
+{
+ struct fb_info *fb_info = class_get_devdata(class_device);
+ u8 tmp_curve[FB_BACKLIGHT_LEVELS];
+ unsigned int i;
+
+ if (count != (FB_BACKLIGHT_LEVELS / 8 * 24))
+ return -EINVAL;
+
+ for (i = 0; i < (FB_BACKLIGHT_LEVELS / 8); ++i)
+ if (sscanf(&buf[i * 24],
+ "%2hhx %2hhx %2hhx %2hhx %2hhx %2hhx %2hhx %2hhx\n",
+ &tmp_curve[i * 8 + 0],
+ &tmp_curve[i * 8 + 1],
+ &tmp_curve[i * 8 + 2],
+ &tmp_curve[i * 8 + 3],
+ &tmp_curve[i * 8 + 4],
+ &tmp_curve[i * 8 + 5],
+ &tmp_curve[i * 8 + 6],
+ &tmp_curve[i * 8 + 7]) != 8)
+ return -EINVAL;
+
+ /* If there has been an error in the input data, we won't
+ * reach this loop.
+ */
+ mutex_lock(&fb_info->bl_mutex);
+ for (i = 0; i < FB_BACKLIGHT_LEVELS; ++i)
+ fb_info->bl_curve[i] = tmp_curve[i];
+ mutex_unlock(&fb_info->bl_mutex);
+
+ return count;
+}
+
+static ssize_t show_bl_curve(struct class_device *class_device, char *buf)
+{
+ struct fb_info *fb_info = class_get_devdata(class_device);
+ ssize_t len = 0;
+ unsigned int i;
+
+ mutex_lock(&fb_info->bl_mutex);
+ for (i = 0; i < FB_BACKLIGHT_LEVELS; i += 8)
+ len += snprintf(&buf[len], PAGE_SIZE,
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ fb_info->bl_curve[i + 0],
+ fb_info->bl_curve[i + 1],
+ fb_info->bl_curve[i + 2],
+ fb_info->bl_curve[i + 3],
+ fb_info->bl_curve[i + 4],
+ fb_info->bl_curve[i + 5],
+ fb_info->bl_curve[i + 6],
+ fb_info->bl_curve[i + 7]);
+ mutex_unlock(&fb_info->bl_mutex);
+
+ return len;
+}
+#endif
+
/* When cmap is added back in it should be a binary attribute
* not a text one. Consideration should also be given to converting
* fbdev to use configfs instead of sysfs */
@@ -432,6 +496,9 @@
__ATTR(con_rotate, S_IRUGO|S_IWUSR, show_con_rotate, store_con_rotate),
__ATTR(con_rotate_all, S_IWUSR, NULL, store_con_rotate_all),
__ATTR(state, S_IRUGO|S_IWUSR, show_fbstate, store_fbstate),
+#ifdef CONFIG_FB_BACKLIGHT
+ __ATTR(bl_curve, S_IRUGO|S_IWUSR, show_bl_curve, store_bl_curve),
+#endif
};
int fb_init_class_device(struct fb_info *fb_info)
@@ -454,4 +521,25 @@
&class_device_attrs[i]);
}
+#ifdef CONFIG_FB_BACKLIGHT
+/* This function generates a linear backlight curve
+ *
+ * 0: off
+ * 1-7: min
+ * 8-127: linear from min to max
+ */
+void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max)
+{
+ unsigned int i, flat, count, range = (max - min);
+ fb_info->bl_curve[0] = off;
+
+ for (flat = 1; flat < (FB_BACKLIGHT_LEVELS / 16); ++flat)
+ fb_info->bl_curve[flat] = min;
+
+ count = FB_BACKLIGHT_LEVELS * 15 / 16;
+ for (i = 0; i < count; ++i)
+ fb_info->bl_curve[flat + i] = min + (range * (i + 1) / count);
+}
+EXPORT_SYMBOL_GPL(fb_bl_default_curve);
+#endif
diff --git a/drivers/video/nvidia/Makefile b/drivers/video/nvidia/Makefile
index 690d37e..ca47432 100644
--- a/drivers/video/nvidia/Makefile
+++ b/drivers/video/nvidia/Makefile
@@ -7,6 +7,7 @@
nvidiafb-y := nvidia.o nv_hw.o nv_setup.o \
nv_accel.o
nvidiafb-$(CONFIG_FB_NVIDIA_I2C) += nv_i2c.o
+nvidiafb-$(CONFIG_FB_NVIDIA_BACKLIGHT) += nv_backlight.o
nvidiafb-$(CONFIG_PPC_OF) += nv_of.o
-nvidiafb-objs := $(nvidiafb-y)
\ No newline at end of file
+nvidiafb-objs := $(nvidiafb-y)
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c
new file mode 100644
index 0000000..1c1c10c
--- /dev/null
+++ b/drivers/video/nvidia/nv_backlight.c
@@ -0,0 +1,175 @@
+/*
+ * Backlight code for nVidia based graphic cards
+ *
+ * Copyright 2004 Antonino Daplas <adaplas@pol.net>
+ * Copyright (c) 2006 Michael Hanselmann <linux-kernel@hansmi.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include "nv_local.h"
+#include "nv_type.h"
+#include "nv_proto.h"
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#include <asm/machdep.h>
+#endif
+
+/* We do not have any information about which values are allowed, thus
+ * we used safe values.
+ */
+#define MIN_LEVEL 0x158
+#define MAX_LEVEL 0x534
+
+static struct backlight_properties nvidia_bl_data;
+
+static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
+ int level)
+{
+ struct fb_info *info = pci_get_drvdata(par->pci_dev);
+ int nlevel;
+
+ /* Get and convert the value */
+ mutex_lock(&info->bl_mutex);
+ nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
+ mutex_unlock(&info->bl_mutex);
+
+ if (nlevel < 0)
+ nlevel = 0;
+ else if (nlevel < MIN_LEVEL)
+ nlevel = MIN_LEVEL;
+ else if (nlevel > MAX_LEVEL)
+ nlevel = MAX_LEVEL;
+
+ return nlevel;
+}
+
+static int nvidia_bl_update_status(struct backlight_device *bd)
+{
+ struct nvidia_par *par = class_get_devdata(&bd->class_dev);
+ u32 tmp_pcrt, tmp_pmc, fpcontrol;
+ int level;
+
+ if (!par->FlatPanel)
+ return 0;
+
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK)
+ level = 0;
+ else
+ level = bd->props->brightness;
+
+ tmp_pmc = NV_RD32(par->PMC, 0x10F0) & 0x0000FFFF;
+ tmp_pcrt = NV_RD32(par->PCRTC0, 0x081C) & 0xFFFFFFFC;
+ fpcontrol = NV_RD32(par->PRAMDAC, 0x0848) & 0xCFFFFFCC;
+
+ if (level > 0) {
+ tmp_pcrt |= 0x1;
+ tmp_pmc |= (1 << 31); /* backlight bit */
+ tmp_pmc |= nvidia_bl_get_level_brightness(par, level) << 16;
+ fpcontrol |= par->fpSyncs;
+ } else
+ fpcontrol |= 0x20000022;
+
+ NV_WR32(par->PCRTC0, 0x081C, tmp_pcrt);
+ NV_WR32(par->PMC, 0x10F0, tmp_pmc);
+ NV_WR32(par->PRAMDAC, 0x848, fpcontrol);
+
+ return 0;
+}
+
+static int nvidia_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props->brightness;
+}
+
+static struct backlight_properties nvidia_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = nvidia_bl_get_brightness,
+ .update_status = nvidia_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
+};
+
+void nvidia_bl_init(struct nvidia_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pci_dev);
+ struct backlight_device *bd;
+ char name[12];
+
+ if (!par->FlatPanel)
+ return;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!machine_is(powermac) ||
+ !pmac_has_backlight_type("mnca"))
+ return;
+#endif
+
+ snprintf(name, sizeof(name), "nvidiabl%d", info->node);
+
+ bd = backlight_device_register(name, par, &nvidia_bl_data);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk("nvidia: Backlight registration failed\n");
+ goto error;
+ }
+
+ mutex_lock(&info->bl_mutex);
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 0x158 * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ up(&bd->sem);
+ bd->props->brightness = nvidia_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ down(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("nvidia: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+void nvidia_bl_exit(struct nvidia_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pci_dev);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ backlight_device_unregister(info->bl_dev);
+
+ printk("nvidia: Backlight unloaded\n");
+ }
+ mutex_unlock(&info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/nvidia/nv_proto.h
index b149a69..6fba656 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/nvidia/nv_proto.h
@@ -63,4 +63,14 @@
const struct fb_image *image);
extern int nvidiafb_sync(struct fb_info *info);
extern u8 byte_rev[256];
+
+/* in nv_backlight.h */
+#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
+extern void nvidia_bl_init(struct nvidia_par *par);
+extern void nvidia_bl_exit(struct nvidia_par *par);
+#else
+static inline void nvidia_bl_init(struct nvidia_par *par) {}
+static inline void nvidia_bl_exit(struct nvidia_par *par) {}
+#endif
+
#endif /* __NV_PROTO_H__ */
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index 093ab99..03a7c1e 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/console.h>
+#include <linux/backlight.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
@@ -29,10 +30,6 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#endif
-#ifdef CONFIG_PMAC_BACKLIGHT
-#include <asm/machdep.h>
-#include <asm/backlight.h>
-#endif
#include "nv_local.h"
#include "nv_type.h"
@@ -470,75 +467,6 @@
.vmode = FB_VMODE_NONINTERLACED
};
-/*
- * Backlight control
- */
-#ifdef CONFIG_PMAC_BACKLIGHT
-
-static int nvidia_backlight_levels[] = {
- 0x158,
- 0x192,
- 0x1c6,
- 0x200,
- 0x234,
- 0x268,
- 0x2a2,
- 0x2d6,
- 0x310,
- 0x344,
- 0x378,
- 0x3b2,
- 0x3e6,
- 0x41a,
- 0x454,
- 0x534,
-};
-
-/* ------------------------------------------------------------------------- *
- *
- * Backlight operations
- *
- * ------------------------------------------------------------------------- */
-
-static int nvidia_set_backlight_enable(int on, int level, void *data)
-{
- struct nvidia_par *par = data;
- u32 tmp_pcrt, tmp_pmc, fpcontrol;
-
- tmp_pmc = NV_RD32(par->PMC, 0x10F0) & 0x0000FFFF;
- tmp_pcrt = NV_RD32(par->PCRTC0, 0x081C) & 0xFFFFFFFC;
- fpcontrol = NV_RD32(par->PRAMDAC, 0x0848) & 0xCFFFFFCC;
-
- if (on && (level > BACKLIGHT_OFF)) {
- tmp_pcrt |= 0x1;
- tmp_pmc |= (1 << 31); // backlight bit
- tmp_pmc |= nvidia_backlight_levels[level - 1] << 16;
- }
-
- if (on)
- fpcontrol |= par->fpSyncs;
- else
- fpcontrol |= 0x20000022;
-
- NV_WR32(par->PCRTC0, 0x081C, tmp_pcrt);
- NV_WR32(par->PMC, 0x10F0, tmp_pmc);
- NV_WR32(par->PRAMDAC, 0x848, fpcontrol);
-
- return 0;
-}
-
-static int nvidia_set_backlight_level(int level, void *data)
-{
- return nvidia_set_backlight_enable(1, level, data);
-}
-
-static struct backlight_controller nvidia_backlight_controller = {
- nvidia_set_backlight_enable,
- nvidia_set_backlight_level
-};
-
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
static void nvidiafb_load_cursor_image(struct nvidia_par *par, u8 * data8,
u16 bg, u16 fg, u32 w, u32 h)
{
@@ -1355,10 +1283,15 @@
NVWriteSeq(par, 0x01, tmp);
NVWriteCrtc(par, 0x1a, vesa);
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && machine_is(powermac)) {
- set_backlight_enable(!blank);
+#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->power = blank;
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
}
+ mutex_unlock(&info->bl_mutex);
#endif
NVTRACE_LEAVE();
@@ -1741,11 +1674,9 @@
"PCI nVidia %s framebuffer (%dMB @ 0x%lX)\n",
info->fix.id,
par->FbMapSize / (1024 * 1024), info->fix.smem_start);
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (par->FlatPanel && machine_is(powermac))
- register_backlight_controller(&nvidia_backlight_controller,
- par, "mnca");
-#endif
+
+ nvidia_bl_init(par);
+
NVTRACE_LEAVE();
return 0;
@@ -1775,6 +1706,8 @@
NVTRACE_ENTER();
+ nvidia_bl_exit(par);
+
unregister_framebuffer(info);
#ifdef CONFIG_MTRR
if (par->mtrr.vram_valid)
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index 3e9308f..d4384ab 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -41,6 +41,7 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/backlight.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
@@ -272,34 +273,154 @@
/*
* Backlight control
*/
+#ifdef CONFIG_FB_RIVA_BACKLIGHT
+/* We do not have any information about which values are allowed, thus
+ * we used safe values.
+ */
+#define MIN_LEVEL 0x158
+#define MAX_LEVEL 0x534
+
+static struct backlight_properties riva_bl_data;
+
+static int riva_bl_get_level_brightness(struct riva_par *par,
+ int level)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int nlevel;
+
+ /* Get and convert the value */
+ mutex_lock(&info->bl_mutex);
+ nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
+ mutex_unlock(&info->bl_mutex);
+
+ if (nlevel < 0)
+ nlevel = 0;
+ else if (nlevel < MIN_LEVEL)
+ nlevel = MIN_LEVEL;
+ else if (nlevel > MAX_LEVEL)
+ nlevel = MAX_LEVEL;
+
+ return nlevel;
+}
+
+static int riva_bl_update_status(struct backlight_device *bd)
+{
+ struct riva_par *par = class_get_devdata(&bd->class_dev);
+ U032 tmp_pcrt, tmp_pmc;
+ int level;
+
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK)
+ level = 0;
+ else
+ level = bd->props->brightness;
+
+ tmp_pmc = par->riva.PMC[0x10F0/4] & 0x0000FFFF;
+ tmp_pcrt = par->riva.PCRTC0[0x081C/4] & 0xFFFFFFFC;
+ if(level > 0) {
+ tmp_pcrt |= 0x1;
+ tmp_pmc |= (1 << 31); /* backlight bit */
+ tmp_pmc |= riva_bl_get_level_brightness(par, level) << 16; /* level */
+ }
+ par->riva.PCRTC0[0x081C/4] = tmp_pcrt;
+ par->riva.PMC[0x10F0/4] = tmp_pmc;
+
+ return 0;
+}
+
+static int riva_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props->brightness;
+}
+
+static struct backlight_properties riva_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = riva_bl_get_brightness,
+ .update_status = riva_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
+};
+
+static void riva_bl_init(struct riva_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ struct backlight_device *bd;
+ char name[12];
+
+ if (!par->FlatPanel)
+ return;
+
#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!machine_is(powermac) ||
+ !pmac_has_backlight_type("mnca"))
+ return;
+#endif
-static int riva_backlight_levels[] = {
- 0x158,
- 0x192,
- 0x1c6,
- 0x200,
- 0x234,
- 0x268,
- 0x2a2,
- 0x2d6,
- 0x310,
- 0x344,
- 0x378,
- 0x3b2,
- 0x3e6,
- 0x41a,
- 0x454,
- 0x534,
-};
+ snprintf(name, sizeof(name), "rivabl%d", info->node);
-static int riva_set_backlight_enable(int on, int level, void *data);
-static int riva_set_backlight_level(int level, void *data);
-static struct backlight_controller riva_backlight_controller = {
- riva_set_backlight_enable,
- riva_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
+ bd = backlight_device_register(name, par, &riva_bl_data);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk("riva: Backlight registration failed\n");
+ goto error;
+ }
+
+ mutex_lock(&info->bl_mutex);
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 0x158 * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ up(&bd->sem);
+ bd->props->brightness = riva_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ down(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("riva: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+static void riva_bl_exit(struct riva_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ backlight_device_unregister(info->bl_dev);
+
+ printk("riva: Backlight unloaded\n");
+ }
+ mutex_unlock(&info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
+#else
+static inline void riva_bl_init(struct riva_par *par) {}
+static inline void riva_bl_exit(struct riva_par *par) {}
+#endif /* CONFIG_FB_RIVA_BACKLIGHT */
/* ------------------------------------------------------------------------- *
*
@@ -973,36 +1094,6 @@
/* ------------------------------------------------------------------------- *
*
- * Backlight operations
- *
- * ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int riva_set_backlight_enable(int on, int level, void *data)
-{
- struct riva_par *par = data;
- U032 tmp_pcrt, tmp_pmc;
-
- tmp_pmc = par->riva.PMC[0x10F0/4] & 0x0000FFFF;
- tmp_pcrt = par->riva.PCRTC0[0x081C/4] & 0xFFFFFFFC;
- if(on && (level > BACKLIGHT_OFF)) {
- tmp_pcrt |= 0x1;
- tmp_pmc |= (1 << 31); // backlight bit
- tmp_pmc |= riva_backlight_levels[level-1] << 16; // level
- }
- par->riva.PCRTC0[0x081C/4] = tmp_pcrt;
- par->riva.PMC[0x10F0/4] = tmp_pmc;
- return 0;
-}
-
-static int riva_set_backlight_level(int level, void *data)
-{
- return riva_set_backlight_enable(1, level, data);
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-/* ------------------------------------------------------------------------- *
- *
* framebuffer operations
*
* ------------------------------------------------------------------------- */
@@ -1247,10 +1338,15 @@
SEQout(par, 0x01, tmp);
CRTCout(par, 0x1a, vesa);
-#ifdef CONFIG_PMAC_BACKLIGHT
- if ( par->FlatPanel && machine_is(powermac)) {
- set_backlight_enable(!blank);
+#ifdef CONFIG_FB_RIVA_BACKLIGHT
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->power = blank;
+ info->bl_dev->props->update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
}
+ mutex_unlock(&info->bl_mutex);
#endif
NVTRACE_LEAVE();
@@ -2037,11 +2133,9 @@
RIVAFB_VERSION,
info->fix.smem_len / (1024 * 1024),
info->fix.smem_start);
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (default_par->FlatPanel && machine_is(powermac))
- register_backlight_controller(&riva_backlight_controller,
- default_par, "mnca");
-#endif
+
+ riva_bl_init(info->par);
+
NVTRACE_LEAVE();
return 0;
@@ -2074,6 +2168,8 @@
NVTRACE_ENTER();
+ riva_bl_exit(par);
+
#ifdef CONFIG_FB_RIVA_I2C
riva_delete_i2c_busses(par);
kfree(par->EDID);