Merge master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix typo in earlier cifs_unlink change and protect one
[CIFS] Incorrect signature sent on SMB Read
[CIFS] Fix unlink oops when indirectly called in rename error path
[CIFS] Fix two remaining coverity scan tool warnings.
[CIFS] Set correct lock type on new posix unlock call
[CIFS] Upate cifs change log
[CIFS] Fix slow oplock break response when mounts to different
[CIFS] Workaround various server bugs found in testing at connectathon
[CIFS] Allow fallback for setting file size to Procom SMB server when
[CIFS] Make POSIX CIFS Extensions SetFSInfo match exactly what we want
[CIFS] Move noisy debug message (triggerred by some older servers) from
[CIFS] Use correct pid on new cifs posix byte range lock call
[CIFS] Add posix (advisory) byte range locking support to cifs client
[CIFS] CIFS readdir perf optimizations part 1
[CIFS] Free small buffers earlier so we exceed the cifs
[CIFS] Fix large (ie over 64K for MaxCIFSBufSize) buffer case for wrapping
[CIFS] Convert remaining places in fs/cifs from
[CIFS] SessionSetup cleanup part 2
[CIFS] fix compile error (typo) and warning in cifssmb.c
[CIFS] Cleanup NTLMSSP session setup handling
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 495858b..59d0c74 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -127,13 +127,6 @@
---------------------------
-What: EXPORT_SYMBOL(lookup_hash)
-When: January 2006
-Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
-Who: Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: CONFIG_FORCED_INLINING
When: June 2006
Why: Config option is there to see if gcc is good enough. (in january
@@ -241,3 +234,15 @@
Who: Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
+
+What: find_trylock_page
+When: January 2007
+Why: The interface no longer has any callers left in the kernel. It
+ is an odd interface (compared with other find_*_page functions), in
+ that it does not take a refcount to the page, only the page lock.
+ It should be replaced with find_get_page or find_lock_page if possible.
+ This feature removal can be reevaluated if users of the interface
+ cannot cleanly use something else.
+Who: Nick Piggin <npiggin@suse.de>
+
+---------------------------
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
new file mode 100644
index 0000000..8c35c04
--- /dev/null
+++ b/Documentation/leds-class.txt
@@ -0,0 +1,71 @@
+LED handling under Linux
+========================
+
+If you're reading this and thinking about keyboard leds, these are
+handled by the input subsystem and the led class is *not* needed.
+
+In its simplest form, the LED class just allows control of LEDs from
+userspace. LEDs appear in /sys/class/leds/. The brightness file will
+set the brightness of the LED (taking a value 0-255). Most LEDs don't
+have hardware brightness support so will just be turned on for non-zero
+brightness settings.
+
+The class also introduces the optional concept of an LED trigger. A trigger
+is a kernel based source of led events. Triggers can either be simple or
+complex. A simple trigger isn't configurable and is designed to slot into
+existing subsystems with minimal additional code. Examples are the ide-disk,
+nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
+optimises away.
+
+Complex triggers whilst available to all LEDs have LED specific
+parameters and work on a per LED basis. The timer trigger is an example.
+
+You can change triggers in a similar manner to the way an IO scheduler
+is chosen (via /sys/class/leds/<device>/trigger). Trigger specific
+parameters can appear in /sys/class/leds/<device> once a given trigger is
+selected.
+
+
+Design Philosophy
+=================
+
+The underlying design philosophy is simplicity. LEDs are simple devices
+and the aim is to keep a small amount of code giving as much functionality
+as possible. Please keep this in mind when suggesting enhancements.
+
+
+LED Device Naming
+=================
+
+Is currently of the form:
+
+"devicename:colour"
+
+There have been calls for LED properties such as colour to be exported as
+individual led class attributes. As a solution which doesn't incur as much
+overhead, I suggest these become part of the device name. The naming scheme
+above leaves scope for further attributes should they be needed.
+
+
+Known Issues
+============
+
+The LED Trigger core cannot be a module as the simple trigger functions
+would cause nightmare dependency issues. I see this as a minor issue
+compared to the benefits the simple trigger functionality brings. The
+rest of the LED subsystem can be modular.
+
+Some leds can be programmed to flash in hardware. As this isn't a generic
+LED device property, this should be exported as a device specific sysfs
+attribute rather than part of the class if this functionality is required.
+
+
+Future Development
+==================
+
+At the moment, a trigger can't be created specifically for a single LED.
+There are a number of cases where a trigger might only be mappable to a
+particular LED (ACPI?). The addition of triggers provided by the LED driver
+should cover this option and be possible to add without breaking the
+current interface.
+
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
new file mode 100644
index 0000000..f855031
--- /dev/null
+++ b/Documentation/memory-barriers.txt
@@ -0,0 +1,1913 @@
+ ============================
+ LINUX KERNEL MEMORY BARRIERS
+ ============================
+
+By: David Howells <dhowells@redhat.com>
+
+Contents:
+
+ (*) Abstract memory access model.
+
+ - Device operations.
+ - Guarantees.
+
+ (*) What are memory barriers?
+
+ - Varieties of memory barrier.
+ - What may not be assumed about memory barriers?
+ - Data dependency barriers.
+ - Control dependencies.
+ - SMP barrier pairing.
+ - Examples of memory barrier sequences.
+
+ (*) Explicit kernel barriers.
+
+ - Compiler barrier.
+ - The CPU memory barriers.
+ - MMIO write barrier.
+
+ (*) Implicit kernel memory barriers.
+
+ - Locking functions.
+ - Interrupt disabling functions.
+ - Miscellaneous functions.
+
+ (*) Inter-CPU locking barrier effects.
+
+ - Locks vs memory accesses.
+ - Locks vs I/O accesses.
+
+ (*) Where are memory barriers needed?
+
+ - Interprocessor interaction.
+ - Atomic operations.
+ - Accessing devices.
+ - Interrupts.
+
+ (*) Kernel I/O barrier effects.
+
+ (*) Assumed minimum execution ordering model.
+
+ (*) The effects of the cpu cache.
+
+ - Cache coherency.
+ - Cache coherency vs DMA.
+ - Cache coherency vs MMIO.
+
+ (*) The things CPUs get up to.
+
+ - And then there's the Alpha.
+
+ (*) References.
+
+
+============================
+ABSTRACT MEMORY ACCESS MODEL
+============================
+
+Consider the following abstract model of the system:
+
+ : :
+ : :
+ : :
+ +-------+ : +--------+ : +-------+
+ | | : | | : | |
+ | | : | | : | |
+ | CPU 1 |<----->| Memory |<----->| CPU 2 |
+ | | : | | : | |
+ | | : | | : | |
+ +-------+ : +--------+ : +-------+
+ ^ : ^ : ^
+ | : | : |
+ | : | : |
+ | : v : |
+ | : +--------+ : |
+ | : | | : |
+ | : | | : |
+ +---------->| Device |<----------+
+ : | | :
+ : | | :
+ : +--------+ :
+ : :
+
+Each CPU executes a program that generates memory access operations. In the
+abstract CPU, memory operation ordering is very relaxed, and a CPU may actually
+perform the memory operations in any order it likes, provided program causality
+appears to be maintained. Similarly, the compiler may also arrange the
+instructions it emits in any order it likes, provided it doesn't affect the
+apparent operation of the program.
+
+So in the above diagram, the effects of the memory operations performed by a
+CPU are perceived by the rest of the system as the operations cross the
+interface between the CPU and rest of the system (the dotted lines).
+
+
+For example, consider the following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1; B == 2 }
+ A = 3; x = A;
+ B = 4; y = B;
+
+The set of accesses as seen by the memory system in the middle can be arranged
+in 24 different combinations:
+
+ STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4
+ STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3
+ STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4
+ STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4
+ STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3
+ STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4
+ STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4
+ STORE B=4, ...
+ ...
+
+and can thus result in four different combinations of values:
+
+ x == 1, y == 2
+ x == 1, y == 4
+ x == 3, y == 2
+ x == 3, y == 4
+
+
+Furthermore, the stores committed by a CPU to the memory system may not be
+perceived by the loads made by another CPU in the same order as the stores were
+committed.
+
+
+As a further example, consider this sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4; Q = P;
+ P = &B D = *Q;
+
+There is an obvious data dependency here, as the value loaded into D depends on
+the address retrieved from P by CPU 2. At the end of the sequence, any of the
+following results are possible:
+
+ (Q == &A) and (D == 1)
+ (Q == &B) and (D == 2)
+ (Q == &B) and (D == 4)
+
+Note that CPU 2 will never try and load C into D because the CPU will load P
+into Q before issuing the load of *Q.
+
+
+DEVICE OPERATIONS
+-----------------
+
+Some devices present their control interfaces as collections of memory
+locations, but the order in which the control registers are accessed is very
+important. For instance, imagine an ethernet card with a set of internal
+registers that are accessed through an address port register (A) and a data
+port register (D). To read internal register 5, the following code might then
+be used:
+
+ *A = 5;
+ x = *D;
+
+but this might show up as either of the following two sequences:
+
+ STORE *A = 5, x = LOAD *D
+ x = LOAD *D, STORE *A = 5
+
+the second of which will almost certainly result in a malfunction, since it set
+the address _after_ attempting to read the register.
+
+
+GUARANTEES
+----------
+
+There are some minimal guarantees that may be expected of a CPU:
+
+ (*) On any given CPU, dependent memory accesses will be issued in order, with
+ respect to itself. This means that for:
+
+ Q = P; D = *Q;
+
+ the CPU will issue the following memory operations:
+
+ Q = LOAD P, D = LOAD *Q
+
+ and always in that order.
+
+ (*) Overlapping loads and stores within a particular CPU will appear to be
+ ordered within that CPU. This means that for:
+
+ a = *X; *X = b;
+
+ the CPU will only issue the following sequence of memory operations:
+
+ a = LOAD *X, STORE *X = b
+
+ And for:
+
+ *X = c; d = *X;
+
+ the CPU will only issue:
+
+ STORE *X = c, d = LOAD *X
+
+ (Loads and stores overlap if they are targetted at overlapping pieces of
+ memory).
+
+And there are a number of things that _must_ or _must_not_ be assumed:
+
+ (*) It _must_not_ be assumed that independent loads and stores will be issued
+ in the order given. This means that for:
+
+ X = *A; Y = *B; *D = Z;
+
+ we may get any of the following sequences:
+
+ X = LOAD *A, Y = LOAD *B, STORE *D = Z
+ X = LOAD *A, STORE *D = Z, Y = LOAD *B
+ Y = LOAD *B, X = LOAD *A, STORE *D = Z
+ Y = LOAD *B, STORE *D = Z, X = LOAD *A
+ STORE *D = Z, X = LOAD *A, Y = LOAD *B
+ STORE *D = Z, Y = LOAD *B, X = LOAD *A
+
+ (*) It _must_ be assumed that overlapping memory accesses may be merged or
+ discarded. This means that for:
+
+ X = *A; Y = *(A + 4);
+
+ we may get any one of the following sequences:
+
+ X = LOAD *A; Y = LOAD *(A + 4);
+ Y = LOAD *(A + 4); X = LOAD *A;
+ {X, Y} = LOAD {*A, *(A + 4) };
+
+ And for:
+
+ *A = X; Y = *A;
+
+ we may get either of:
+
+ STORE *A = X; Y = LOAD *A;
+ STORE *A = Y;
+
+
+=========================
+WHAT ARE MEMORY BARRIERS?
+=========================
+
+As can be seen above, independent memory operations are effectively performed
+in random order, but this can be a problem for CPU-CPU interaction and for I/O.
+What is required is some way of intervening to instruct the compiler and the
+CPU to restrict the order.
+
+Memory barriers are such interventions. They impose a perceived partial
+ordering between the memory operations specified on either side of the barrier.
+They request that the sequence of memory events generated appears to other
+parts of the system as if the barrier is effective on that CPU.
+
+
+VARIETIES OF MEMORY BARRIER
+---------------------------
+
+Memory barriers come in four basic varieties:
+
+ (1) Write (or store) memory barriers.
+
+ A write memory barrier gives a guarantee that all the STORE operations
+ specified before the barrier will appear to happen before all the STORE
+ operations specified after the barrier with respect to the other
+ components of the system.
+
+ A write barrier is a partial ordering on stores only; it is not required
+ to have any effect on loads.
+
+ A CPU can be viewed as as commiting a sequence of store operations to the
+ memory system as time progresses. All stores before a write barrier will
+ occur in the sequence _before_ all the stores after the write barrier.
+
+ [!] Note that write barriers should normally be paired with read or data
+ dependency barriers; see the "SMP barrier pairing" subsection.
+
+
+ (2) Data dependency barriers.
+
+ A data dependency barrier is a weaker form of read barrier. In the case
+ where two loads are performed such that the second depends on the result
+ of the first (eg: the first load retrieves the address to which the second
+ load will be directed), a data dependency barrier would be required to
+ make sure that the target of the second load is updated before the address
+ obtained by the first load is accessed.
+
+ A data dependency barrier is a partial ordering on interdependent loads
+ only; it is not required to have any effect on stores, independent loads
+ or overlapping loads.
+
+ As mentioned in (1), the other CPUs in the system can be viewed as
+ committing sequences of stores to the memory system that the CPU being
+ considered can then perceive. A data dependency barrier issued by the CPU
+ under consideration guarantees that for any load preceding it, if that
+ load touches one of a sequence of stores from another CPU, then by the
+ time the barrier completes, the effects of all the stores prior to that
+ touched by the load will be perceptible to any loads issued after the data
+ dependency barrier.
+
+ See the "Examples of memory barrier sequences" subsection for diagrams
+ showing the ordering constraints.
+
+ [!] Note that the first load really has to have a _data_ dependency and
+ not a control dependency. If the address for the second load is dependent
+ on the first load, but the dependency is through a conditional rather than
+ actually loading the address itself, then it's a _control_ dependency and
+ a full read barrier or better is required. See the "Control dependencies"
+ subsection for more information.
+
+ [!] Note that data dependency barriers should normally be paired with
+ write barriers; see the "SMP barrier pairing" subsection.
+
+
+ (3) Read (or load) memory barriers.
+
+ A read barrier is a data dependency barrier plus a guarantee that all the
+ LOAD operations specified before the barrier will appear to happen before
+ all the LOAD operations specified after the barrier with respect to the
+ other components of the system.
+
+ A read barrier is a partial ordering on loads only; it is not required to
+ have any effect on stores.
+
+ Read memory barriers imply data dependency barriers, and so can substitute
+ for them.
+
+ [!] Note that read barriers should normally be paired with write barriers;
+ see the "SMP barrier pairing" subsection.
+
+
+ (4) General memory barriers.
+
+ A general memory barrier is a combination of both a read memory barrier
+ and a write memory barrier. It is a partial ordering over both loads and
+ stores.
+
+ General memory barriers imply both read and write memory barriers, and so
+ can substitute for either.
+
+
+And a couple of implicit varieties:
+
+ (5) LOCK operations.
+
+ This acts as a one-way permeable barrier. It guarantees that all memory
+ operations after the LOCK operation will appear to happen after the LOCK
+ operation with respect to the other components of the system.
+
+ Memory operations that occur before a LOCK operation may appear to happen
+ after it completes.
+
+ A LOCK operation should almost always be paired with an UNLOCK operation.
+
+
+ (6) UNLOCK operations.
+
+ This also acts as a one-way permeable barrier. It guarantees that all
+ memory operations before the UNLOCK operation will appear to happen before
+ the UNLOCK operation with respect to the other components of the system.
+
+ Memory operations that occur after an UNLOCK operation may appear to
+ happen before it completes.
+
+ LOCK and UNLOCK operations are guaranteed to appear with respect to each
+ other strictly in the order specified.
+
+ The use of LOCK and UNLOCK operations generally precludes the need for
+ other sorts of memory barrier (but note the exceptions mentioned in the
+ subsection "MMIO write barrier").
+
+
+Memory barriers are only required where there's a possibility of interaction
+between two CPUs or between a CPU and a device. If it can be guaranteed that
+there won't be any such interaction in any particular piece of code, then
+memory barriers are unnecessary in that piece of code.
+
+
+Note that these are the _minimum_ guarantees. Different architectures may give
+more substantial guarantees, but they may _not_ be relied upon outside of arch
+specific code.
+
+
+WHAT MAY NOT BE ASSUMED ABOUT MEMORY BARRIERS?
+----------------------------------------------
+
+There are certain things that the Linux kernel memory barriers do not guarantee:
+
+ (*) There is no guarantee that any of the memory accesses specified before a
+ memory barrier will be _complete_ by the completion of a memory barrier
+ instruction; the barrier can be considered to draw a line in that CPU's
+ access queue that accesses of the appropriate type may not cross.
+
+ (*) There is no guarantee that issuing a memory barrier on one CPU will have
+ any direct effect on another CPU or any other hardware in the system. The
+ indirect effect will be the order in which the second CPU sees the effects
+ of the first CPU's accesses occur, but see the next point:
+
+ (*) There is no guarantee that the a CPU will see the correct order of effects
+ from a second CPU's accesses, even _if_ the second CPU uses a memory
+ barrier, unless the first CPU _also_ uses a matching memory barrier (see
+ the subsection on "SMP Barrier Pairing").
+
+ (*) There is no guarantee that some intervening piece of off-the-CPU
+ hardware[*] will not reorder the memory accesses. CPU cache coherency
+ mechanisms should propagate the indirect effects of a memory barrier
+ between CPUs, but might not do so in order.
+
+ [*] For information on bus mastering DMA and coherency please read:
+
+ Documentation/pci.txt
+ Documentation/DMA-mapping.txt
+ Documentation/DMA-API.txt
+
+
+DATA DEPENDENCY BARRIERS
+------------------------
+
+The usage requirements of data dependency barriers are a little subtle, and
+it's not always obvious that they're needed. To illustrate, consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+ <write barrier>
+ P = &B
+ Q = P;
+ D = *Q;
+
+There's a clear data dependency here, and it would seem that by the end of the
+sequence, Q must be either &A or &B, and that:
+
+ (Q == &A) implies (D == 1)
+ (Q == &B) implies (D == 4)
+
+But! CPU 2's perception of P may be updated _before_ its perception of B, thus
+leading to the following situation:
+
+ (Q == &B) and (D == 2) ????
+
+Whilst this may seem like a failure of coherency or causality maintenance, it
+isn't, and this behaviour can be observed on certain real CPUs (such as the DEC
+Alpha).
+
+To deal with this, a data dependency barrier must be inserted between the
+address load and the data load:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+ <write barrier>
+ P = &B
+ Q = P;
+ <data dependency barrier>
+ D = *Q;
+
+This enforces the occurrence of one of the two implications, and prevents the
+third possibility from arising.
+
+[!] Note that this extremely counterintuitive situation arises most easily on
+machines with split caches, so that, for example, one cache bank processes
+even-numbered cache lines and the other bank processes odd-numbered cache
+lines. The pointer P might be stored in an odd-numbered cache line, and the
+variable B might be stored in an even-numbered cache line. Then, if the
+even-numbered bank of the reading CPU's cache is extremely busy while the
+odd-numbered bank is idle, one can see the new value of the pointer P (&B),
+but the old value of the variable B (1).
+
+
+Another example of where data dependency barriers might by required is where a
+number is read from memory and then used to calculate the index for an array
+access:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
+ M[1] = 4;
+ <write barrier>
+ P = 1
+ Q = P;
+ <data dependency barrier>
+ D = M[Q];
+
+
+The data dependency barrier is very important to the RCU system, for example.
+See rcu_dereference() in include/linux/rcupdate.h. This permits the current
+target of an RCU'd pointer to be replaced with a new modified target, without
+the replacement target appearing to be incompletely initialised.
+
+See also the subsection on "Cache Coherency" for a more thorough example.
+
+
+CONTROL DEPENDENCIES
+--------------------
+
+A control dependency requires a full read memory barrier, not simply a data
+dependency barrier to make it work correctly. Consider the following bit of
+code:
+
+ q = &a;
+ if (p)
+ q = &b;
+ <data dependency barrier>
+ x = *q;
+
+This will not have the desired effect because there is no actual data
+dependency, but rather a control dependency that the CPU may short-circuit by
+attempting to predict the outcome in advance. In such a case what's actually
+required is:
+
+ q = &a;
+ if (p)
+ q = &b;
+ <read barrier>
+ x = *q;
+
+
+SMP BARRIER PAIRING
+-------------------
+
+When dealing with CPU-CPU interactions, certain types of memory barrier should
+always be paired. A lack of appropriate pairing is almost certainly an error.
+
+A write barrier should always be paired with a data dependency barrier or read
+barrier, though a general barrier would also be viable. Similarly a read
+barrier or a data dependency barrier should always be paired with at least an
+write barrier, though, again, a general barrier is viable:
+
+ CPU 1 CPU 2
+ =============== ===============
+ a = 1;
+ <write barrier>
+ b = 2; x = a;
+ <read barrier>
+ y = b;
+
+Or:
+
+ CPU 1 CPU 2
+ =============== ===============================
+ a = 1;
+ <write barrier>
+ b = &a; x = b;
+ <data dependency barrier>
+ y = *x;
+
+Basically, the read barrier always has to be there, even though it can be of
+the "weaker" type.
+
+
+EXAMPLES OF MEMORY BARRIER SEQUENCES
+------------------------------------
+
+Firstly, write barriers act as a partial orderings on store operations.
+Consider the following sequence of events:
+
+ CPU 1
+ =======================
+ STORE A = 1
+ STORE B = 2
+ STORE C = 3
+ <write barrier>
+ STORE D = 4
+ STORE E = 5
+
+This sequence of events is committed to the memory coherence system in an order
+that the rest of the system might perceive as the unordered set of { STORE A,
+STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+}:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | } /\
+ | | : +------+ }----- \ -----> Events perceptible
+ | | : | A=1 | } \/ to rest of system
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }
+ | | +------+ }
+ | | wwwwwwwwwwwwwwww } <--- At this point the write barrier
+ | | +------+ } requires all stores prior to the
+ | | : | E=5 | } barrier to be committed before
+ | | : +------+ } further stores may be take place.
+ | |------>| D=4 | }
+ | | +------+
+ +-------+ : :
+ |
+ | Sequence in which stores committed to memory system
+ | by CPU 1
+ V
+
+
+Secondly, data dependency barriers act as a partial orderings on data-dependent
+loads. Consider the following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A = 1
+ STORE B = 2
+ <write barrier>
+ STORE C = &B LOAD X
+ STORE D = 4 LOAD C (gets &B)
+ LOAD *C (reads B)
+
+Without intervention, CPU 2 may perceive the events on CPU 1 in some
+effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : : : :
+ | | +------+ +-------+ | Sequence of update
+ | |------>| B=2 |----- --->| Y->8 | | of perception on
+ | | : +------+ \ +-------+ | CPU 2
+ | CPU 1 | : | A=1 | \ --->| C->&Y | V
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ Apparently incorrect ---> | | B->7 |------>| |
+ perception of B (!) | +-------+ | |
+ | : : | |
+ | +-------+ | |
+ The load of X holds ---> \ | X->9 |------>| |
+ up the maintenance \ +-------+ | |
+ of coherence of B ----->| B->2 | +-------+
+ +-------+
+ : :
+
+
+In the above example, CPU 2 perceives that B is 7, despite the load of *C
+(which would be B) coming after the the LOAD of C.
+
+If, however, a data dependency barrier were to be placed between the load of C
+and the load of *C (ie: B) on CPU 2, then the following will occur:
+
+ +-------+ : : : :
+ | | +------+ +-------+
+ | |------>| B=2 |----- --->| Y->8 |
+ | | : +------+ \ +-------+
+ | CPU 1 | : | A=1 | \ --->| C->&Y |
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ \ | X->9 |------>| |
+ \ +-------+ | |
+ ----->| B->2 | | |
+ +-------+ | |
+ Makes sure all effects ---> ddddddddddddddddd | |
+ prior to the store of C +-------+ | |
+ are perceptible to | B->2 |------>| |
+ successive loads +-------+ | |
+ : : +-------+
+
+
+And thirdly, a read barrier acts as a partial order on loads. Consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A=1
+ STORE B=2
+ STORE C=3
+ <write barrier>
+ STORE D=4
+ STORE E=5
+ LOAD A
+ LOAD B
+ LOAD C
+ LOAD D
+ LOAD E
+
+Without intervention, CPU 2 may then choose to perceive the events on CPU 1 in
+some effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }---
+ | | +------+ } \
+ | | wwwwwwwwwwwww} \
+ | | +------+ } \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ } \ { | C->3 |------>| |
+ | |------>| D=4 | } \ { +-------+ : | |
+ | | +------+ \ { | E->5 | : | |
+ +-------+ : : \ { +-------+ : | |
+ Transfer -->{ | A->1 | : | CPU 2 |
+ from CPU 1 { +-------+ : | |
+ to CPU 2 { | D->4 | : | |
+ { +-------+ : | |
+ { | B->2 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+If, however, a read barrier were to be placed between the load of C and the
+load of D on CPU 2, then the partial ordering imposed by CPU 1 will be
+perceived correctly by CPU 2.
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }---
+ | | : +------+ } \
+ | CPU 1 | : | B=2 | } \
+ | | +------+ \
+ | | wwwwwwwwwwwwwwww \
+ | | +------+ \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ }--- \ { | C->3 |------>| |
+ | |------>| D=4 | } \ \ { +-------+ : | |
+ | | +------+ \ -->{ | B->2 | : | |
+ +-------+ : : \ { +-------+ : | |
+ \ { | A->1 | : | CPU 2 |
+ \ +-------+ | |
+ At this point the read ----> \ rrrrrrrrrrrrrrrrr | |
+ barrier causes all effects \ +-------+ | |
+ prior to the storage of C \ { | E->5 | : | |
+ to be perceptible to CPU 2 -->{ +-------+ : | |
+ { | D->4 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+========================
+EXPLICIT KERNEL BARRIERS
+========================
+
+The Linux kernel has a variety of different barriers that act at different
+levels:
+
+ (*) Compiler barrier.
+
+ (*) CPU memory barriers.
+
+ (*) MMIO write barrier.
+
+
+COMPILER BARRIER
+----------------
+
+The Linux kernel has an explicit compiler barrier function that prevents the
+compiler from moving the memory accesses either side of it to the other side:
+
+ barrier();
+
+This a general barrier - lesser varieties of compiler barrier do not exist.
+
+The compiler barrier has no direct effect on the CPU, which may then reorder
+things however it wishes.
+
+
+CPU MEMORY BARRIERS
+-------------------
+
+The Linux kernel has eight basic CPU memory barriers:
+
+ TYPE MANDATORY SMP CONDITIONAL
+ =============== ======================= ===========================
+ GENERAL mb() smp_mb()
+ WRITE wmb() smp_wmb()
+ READ rmb() smp_rmb()
+ DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
+
+
+All CPU memory barriers unconditionally imply compiler barriers.
+
+SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
+systems because it is assumed that a CPU will be appear to be self-consistent,
+and will order overlapping accesses correctly with respect to itself.
+
+[!] Note that SMP memory barriers _must_ be used to control the ordering of
+references to shared memory on SMP systems, though the use of locking instead
+is sufficient.
+
+Mandatory barriers should not be used to control SMP effects, since mandatory
+barriers unnecessarily impose overhead on UP systems. They may, however, be
+used to control MMIO effects on accesses through relaxed memory I/O windows.
+These are required even on non-SMP systems as they affect the order in which
+memory operations appear to a device by prohibiting both the compiler and the
+CPU from reordering them.
+
+
+There are some more advanced barrier functions:
+
+ (*) set_mb(var, value)
+ (*) set_wmb(var, value)
+
+ These assign the value to the variable and then insert at least a write
+ barrier after it, depending on the function. They aren't guaranteed to
+ insert anything more than a compiler barrier in a UP compilation.
+
+
+ (*) smp_mb__before_atomic_dec();
+ (*) smp_mb__after_atomic_dec();
+ (*) smp_mb__before_atomic_inc();
+ (*) smp_mb__after_atomic_inc();
+
+ These are for use with atomic add, subtract, increment and decrement
+ functions, especially when used for reference counting. These functions
+ do not imply memory barriers.
+
+ As an example, consider a piece of code that marks an object as being dead
+ and then decrements the object's reference count:
+
+ obj->dead = 1;
+ smp_mb__before_atomic_dec();
+ atomic_dec(&obj->ref_count);
+
+ This makes sure that the death mark on the object is perceived to be set
+ *before* the reference counter is decremented.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+ (*) smp_mb__before_clear_bit(void);
+ (*) smp_mb__after_clear_bit(void);
+
+ These are for use similar to the atomic inc/dec barriers. These are
+ typically used for bitwise unlocking operations, so care must be taken as
+ there are no implicit memory barriers here either.
+
+ Consider implementing an unlock operation of some nature by clearing a
+ locking bit. The clear_bit() would then need to be barriered like this:
+
+ smp_mb__before_clear_bit();
+ clear_bit( ... );
+
+ This prevents memory operations before the clear leaking to after it. See
+ the subsection on "Locking Functions" with reference to UNLOCK operation
+ implications.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+MMIO WRITE BARRIER
+------------------
+
+The Linux kernel also has a special barrier for use with memory-mapped I/O
+writes:
+
+ mmiowb();
+
+This is a variation on the mandatory write barrier that causes writes to weakly
+ordered I/O regions to be partially ordered. Its effects may go beyond the
+CPU->Hardware interface and actually affect the hardware at some level.
+
+See the subsection "Locks vs I/O accesses" for more information.
+
+
+===============================
+IMPLICIT KERNEL MEMORY BARRIERS
+===============================
+
+Some of the other functions in the linux kernel imply memory barriers, amongst
+which are locking, scheduling and memory allocation functions.
+
+This specification is a _minimum_ guarantee; any particular architecture may
+provide more substantial guarantees, but these may not be relied upon outside
+of arch specific code.
+
+
+LOCKING FUNCTIONS
+-----------------
+
+The Linux kernel has a number of locking constructs:
+
+ (*) spin locks
+ (*) R/W spin locks
+ (*) mutexes
+ (*) semaphores
+ (*) R/W semaphores
+ (*) RCU
+
+In all cases there are variants on "LOCK" operations and "UNLOCK" operations
+for each construct. These operations all imply certain barriers:
+
+ (1) LOCK operation implication:
+
+ Memory operations issued after the LOCK will be completed after the LOCK
+ operation has completed.
+
+ Memory operations issued before the LOCK may be completed after the LOCK
+ operation has completed.
+
+ (2) UNLOCK operation implication:
+
+ Memory operations issued before the UNLOCK will be completed before the
+ UNLOCK operation has completed.
+
+ Memory operations issued after the UNLOCK may be completed before the
+ UNLOCK operation has completed.
+
+ (3) LOCK vs LOCK implication:
+
+ All LOCK operations issued before another LOCK operation will be completed
+ before that LOCK operation.
+
+ (4) LOCK vs UNLOCK implication:
+
+ All LOCK operations issued before an UNLOCK operation will be completed
+ before the UNLOCK operation.
+
+ All UNLOCK operations issued before a LOCK operation will be completed
+ before the LOCK operation.
+
+ (5) Failed conditional LOCK implication:
+
+ Certain variants of the LOCK operation may fail, either due to being
+ unable to get the lock immediately, or due to receiving an unblocked
+ signal whilst asleep waiting for the lock to become available. Failed
+ locks do not imply any sort of barrier.
+
+Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is
+equivalent to a full barrier, but a LOCK followed by an UNLOCK is not.
+
+[!] Note: one of the consequence of LOCKs and UNLOCKs being only one-way
+ barriers is that the effects instructions outside of a critical section may
+ seep into the inside of the critical section.
+
+Locks and semaphores may not provide any guarantee of ordering on UP compiled
+systems, and so cannot be counted on in such a situation to actually achieve
+anything at all - especially with respect to I/O accesses - unless combined
+with interrupt disabling operations.
+
+See also the section on "Inter-CPU locking barrier effects".
+
+
+As an example, consider the following:
+
+ *A = a;
+ *B = b;
+ LOCK
+ *C = c;
+ *D = d;
+ UNLOCK
+ *E = e;
+ *F = f;
+
+The following sequence of events is acceptable:
+
+ LOCK, {*F,*A}, *E, {*C,*D}, *B, UNLOCK
+
+ [+] Note that {*F,*A} indicates a combined access.
+
+But none of the following are:
+
+ {*F,*A}, *B, LOCK, *C, *D, UNLOCK, *E
+ *A, *B, *C, LOCK, *D, UNLOCK, *E, *F
+ *A, *B, LOCK, *C, UNLOCK, *D, *E, *F
+ *B, LOCK, *C, *D, UNLOCK, {*F,*A}, *E
+
+
+
+INTERRUPT DISABLING FUNCTIONS
+-----------------------------
+
+Functions that disable interrupts (LOCK equivalent) and enable interrupts
+(UNLOCK equivalent) will act as compiler barriers only. So if memory or I/O
+barriers are required in such a situation, they must be provided from some
+other means.
+
+
+MISCELLANEOUS FUNCTIONS
+-----------------------
+
+Other functions that imply barriers:
+
+ (*) schedule() and similar imply full memory barriers.
+
+ (*) Memory allocation and release functions imply full memory barriers.
+
+
+=================================
+INTER-CPU LOCKING BARRIER EFFECTS
+=================================
+
+On SMP systems locking primitives give a more substantial form of barrier: one
+that does affect memory access ordering on other CPUs, within the context of
+conflict on any particular lock.
+
+
+LOCKS VS MEMORY ACCESSES
+------------------------
+
+Consider the following: the system has a pair of spinlocks (N) and (Q), and
+three CPUs; then should the following sequence of events occur:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a; *E = e;
+ LOCK M LOCK Q
+ *B = b; *F = f;
+ *C = c; *G = g;
+ UNLOCK M UNLOCK Q
+ *D = d; *H = h;
+
+Then there is no guarantee as to what order CPU #3 will see the accesses to *A
+through *H occur in, other than the constraints imposed by the separate locks
+on the separate CPUs. It might, for example, see:
+
+ *E, LOCK M, LOCK Q, *G, *C, *F, *A, *B, UNLOCK Q, *D, *H, UNLOCK M
+
+But it won't see any of:
+
+ *B, *C or *D preceding LOCK M
+ *A, *B or *C following UNLOCK M
+ *F, *G or *H preceding LOCK Q
+ *E, *F or *G following UNLOCK Q
+
+
+However, if the following occurs:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a;
+ LOCK M [1]
+ *B = b;
+ *C = c;
+ UNLOCK M [1]
+ *D = d; *E = e;
+ LOCK M [2]
+ *F = f;
+ *G = g;
+ UNLOCK M [2]
+ *H = h;
+
+CPU #3 might see:
+
+ *E, LOCK M [1], *C, *B, *A, UNLOCK M [1],
+ LOCK M [2], *H, *F, *G, UNLOCK M [2], *D
+
+But assuming CPU #1 gets the lock first, it won't see any of:
+
+ *B, *C, *D, *F, *G or *H preceding LOCK M [1]
+ *A, *B or *C following UNLOCK M [1]
+ *F, *G or *H preceding LOCK M [2]
+ *A, *B, *C, *E, *F or *G following UNLOCK M [2]
+
+
+LOCKS VS I/O ACCESSES
+---------------------
+
+Under certain circumstances (especially involving NUMA), I/O accesses within
+two spinlocked sections on two different CPUs may be seen as interleaved by the
+PCI bridge, because the PCI bridge does not necessarily participate in the
+cache-coherence protocol, and is therefore incapable of issuing the required
+read memory barriers.
+
+For example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ spin_unlock(Q);
+
+may be seen by the PCI bridge as follows:
+
+ STORE *ADDR = 0, STORE *ADDR = 4, STORE *DATA = 1, STORE *DATA = 5
+
+which would probably cause the hardware to malfunction.
+
+
+What is necessary here is to intervene with an mmiowb() before dropping the
+spinlock, for example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ mmiowb();
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ mmiowb();
+ spin_unlock(Q);
+
+this will ensure that the two stores issued on CPU #1 appear at the PCI bridge
+before either of the stores issued on CPU #2.
+
+
+Furthermore, following a store by a load to the same device obviates the need
+for an mmiowb(), because the load forces the store to complete before the load
+is performed:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ a = readl(DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ b = readl(DATA);
+ spin_unlock(Q);
+
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+=================================
+WHERE ARE MEMORY BARRIERS NEEDED?
+=================================
+
+Under normal operation, memory operation reordering is generally not going to
+be a problem as a single-threaded linear piece of code will still appear to
+work correctly, even if it's in an SMP kernel. There are, however, three
+circumstances in which reordering definitely _could_ be a problem:
+
+ (*) Interprocessor interaction.
+
+ (*) Atomic operations.
+
+ (*) Accessing devices (I/O).
+
+ (*) Interrupts.
+
+
+INTERPROCESSOR INTERACTION
+--------------------------
+
+When there's a system with more than one processor, more than one CPU in the
+system may be working on the same data set at the same time. This can cause
+synchronisation problems, and the usual way of dealing with them is to use
+locks. Locks, however, are quite expensive, and so it may be preferable to
+operate without the use of a lock if at all possible. In such a case
+operations that affect both CPUs may have to be carefully ordered to prevent
+a malfunction.
+
+Consider, for example, the R/W semaphore slow path. Here a waiting process is
+queued on the semaphore, by virtue of it having a piece of its stack linked to
+the semaphore's list of waiting processes:
+
+ struct rw_semaphore {
+ ...
+ spinlock_t lock;
+ struct list_head waiters;
+ };
+
+ struct rwsem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+ };
+
+To wake up a particular waiter, the up_read() or up_write() functions have to:
+
+ (1) read the next pointer from this waiter's record to know as to where the
+ next waiter record is;
+
+ (4) read the pointer to the waiter's task structure;
+
+ (3) clear the task pointer to tell the waiter it has been given the semaphore;
+
+ (4) call wake_up_process() on the task; and
+
+ (5) release the reference held on the waiter's task struct.
+
+In otherwords, it has to perform this sequence of events:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+and if any of these steps occur out of order, then the whole thing may
+malfunction.
+
+Once it has queued itself and dropped the semaphore lock, the waiter does not
+get the lock again; it instead just waits for its task pointer to be cleared
+before proceeding. Since the record is on the waiter's stack, this means that
+if the task pointer is cleared _before_ the next pointer in the list is read,
+another CPU might start processing the waiter and might clobber the waiter's
+stack before the up*() function has a chance to read the next pointer.
+
+Consider then what might happen to the above sequence of events:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ down_xxx()
+ Queue waiter
+ Sleep
+ up_yyy()
+ LOAD waiter->task;
+ STORE waiter->task;
+ Woken up by other event
+ <preempt>
+ Resume processing
+ down_xxx() returns
+ call foo()
+ foo() clobbers *waiter
+ </preempt>
+ LOAD waiter->list.next;
+ --- OOPS ---
+
+This could be dealt with using the semaphore lock, but then the down_xxx()
+function has to needlessly get the spinlock again after being woken up.
+
+The way to deal with this is to insert a general SMP memory barrier:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ smp_mb();
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+In this case, the barrier makes a guarantee that all memory accesses before the
+barrier will appear to happen before all the memory accesses after the barrier
+with respect to the other CPUs on the system. It does _not_ guarantee that all
+the memory accesses before the barrier will be complete by the time the barrier
+instruction itself is complete.
+
+On a UP system - where this wouldn't be a problem - the smp_mb() is just a
+compiler barrier, thus making sure the compiler emits the instructions in the
+right order without actually intervening in the CPU. Since there there's only
+one CPU, that CPU's dependency ordering logic will take care of everything
+else.
+
+
+ATOMIC OPERATIONS
+-----------------
+
+Though they are technically interprocessor interaction considerations, atomic
+operations are noted specially as they do _not_ generally imply memory
+barriers. The possible offenders include:
+
+ xchg();
+ cmpxchg();
+ test_and_set_bit();
+ test_and_clear_bit();
+ test_and_change_bit();
+ atomic_cmpxchg();
+ atomic_inc_return();
+ atomic_dec_return();
+ atomic_add_return();
+ atomic_sub_return();
+ atomic_inc_and_test();
+ atomic_dec_and_test();
+ atomic_sub_and_test();
+ atomic_add_negative();
+ atomic_add_unless();
+
+These may be used for such things as implementing LOCK operations or controlling
+the lifetime of objects by decreasing their reference counts. In such cases
+they need preceding memory barriers.
+
+The following may also be possible offenders as they may be used as UNLOCK
+operations.
+
+ set_bit();
+ clear_bit();
+ change_bit();
+ atomic_set();
+
+
+The following are a little tricky:
+
+ atomic_add();
+ atomic_sub();
+ atomic_inc();
+ atomic_dec();
+
+If they're used for statistics generation, then they probably don't need memory
+barriers, unless there's a coupling between statistical data.
+
+If they're used for reference counting on an object to control its lifetime,
+they probably don't need memory barriers because either the reference count
+will be adjusted inside a locked section, or the caller will already hold
+sufficient references to make the lock, and thus a memory barrier unnecessary.
+
+If they're used for constructing a lock of some description, then they probably
+do need memory barriers as a lock primitive generally has to do things in a
+specific order.
+
+
+Basically, each usage case has to be carefully considered as to whether memory
+barriers are needed or not. The simplest rule is probably: if the atomic
+operation is protected by a lock, then it does not require a barrier unless
+there's another operation within the critical section with respect to which an
+ordering must be maintained.
+
+See Documentation/atomic_ops.txt for more information.
+
+
+ACCESSING DEVICES
+-----------------
+
+Many devices can be memory mapped, and so appear to the CPU as if they're just
+a set of memory locations. To control such a device, the driver usually has to
+make the right memory accesses in exactly the right order.
+
+However, having a clever CPU or a clever compiler creates a potential problem
+in that the carefully sequenced accesses in the driver code won't reach the
+device in the requisite order if the CPU or the compiler thinks it is more
+efficient to reorder, combine or merge accesses - something that would cause
+the device to malfunction.
+
+Inside of the Linux kernel, I/O should be done through the appropriate accessor
+routines - such as inb() or writel() - which know how to make such accesses
+appropriately sequential. Whilst this, for the most part, renders the explicit
+use of memory barriers unnecessary, there are a couple of situations where they
+might be needed:
+
+ (1) On some systems, I/O stores are not strongly ordered across all CPUs, and
+ so for _all_ general drivers locks should be used and mmiowb() must be
+ issued prior to unlocking the critical section.
+
+ (2) If the accessor functions are used to refer to an I/O memory window with
+ relaxed memory access properties, then _mandatory_ memory barriers are
+ required to enforce ordering.
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+INTERRUPTS
+----------
+
+A driver may be interrupted by its own interrupt service routine, and thus the
+two parts of the driver may interfere with each other's attempts to control or
+access the device.
+
+This may be alleviated - at least in part - by disabling local interrupts (a
+form of locking), such that the critical operations are all contained within
+the interrupt-disabled section in the driver. Whilst the driver's interrupt
+routine is executing, the driver's core may not run on the same CPU, and its
+interrupt is not permitted to happen again until the current interrupt has been
+handled, thus the interrupt handler does not need to lock against that.
+
+However, consider a driver that was talking to an ethernet card that sports an
+address register and a data register. If that driver's core talks to the card
+under interrupt-disablement and then the driver's interrupt handler is invoked:
+
+ LOCAL IRQ DISABLE
+ writew(ADDR, 3);
+ writew(DATA, y);
+ LOCAL IRQ ENABLE
+ <interrupt>
+ writew(ADDR, 4);
+ q = readw(DATA);
+ </interrupt>
+
+The store to the data register might happen after the second store to the
+address register if ordering rules are sufficiently relaxed:
+
+ STORE *ADDR = 3, STORE *ADDR = 4, STORE *DATA = y, q = LOAD *DATA
+
+
+If ordering rules are relaxed, it must be assumed that accesses done inside an
+interrupt disabled section may leak outside of it and may interleave with
+accesses performed in an interrupt - and vice versa - unless implicit or
+explicit barriers are used.
+
+Normally this won't be a problem because the I/O accesses done inside such
+sections will include synchronous load operations on strictly ordered I/O
+registers that form implicit I/O barriers. If this isn't sufficient then an
+mmiowb() may need to be used explicitly.
+
+
+A similar situation may occur between an interrupt routine and two routines
+running on separate CPUs that communicate with each other. If such a case is
+likely, then interrupt-disabling locks should be used to guarantee ordering.
+
+
+==========================
+KERNEL I/O BARRIER EFFECTS
+==========================
+
+When accessing I/O memory, drivers should use the appropriate accessor
+functions:
+
+ (*) inX(), outX():
+
+ These are intended to talk to I/O space rather than memory space, but
+ that's primarily a CPU-specific concept. The i386 and x86_64 processors do
+ indeed have special I/O space access cycles and instructions, but many
+ CPUs don't have such a concept.
+
+ The PCI bus, amongst others, defines an I/O space concept - which on such
+ CPUs as i386 and x86_64 cpus readily maps to the CPU's concept of I/O
+ space. However, it may also mapped as a virtual I/O space in the CPU's
+ memory map, particularly on those CPUs that don't support alternate
+ I/O spaces.
+
+ Accesses to this space may be fully synchronous (as on i386), but
+ intermediary bridges (such as the PCI host bridge) may not fully honour
+ that.
+
+ They are guaranteed to be fully ordered with respect to each other.
+
+ They are not guaranteed to be fully ordered with respect to other types of
+ memory and I/O operation.
+
+ (*) readX(), writeX():
+
+ Whether these are guaranteed to be fully ordered and uncombined with
+ respect to each other on the issuing CPU depends on the characteristics
+ defined for the memory window through which they're accessing. On later
+ i386 architecture machines, for example, this is controlled by way of the
+ MTRR registers.
+
+ Ordinarily, these will be guaranteed to be fully ordered and uncombined,,
+ provided they're not accessing a prefetchable device.
+
+ However, intermediary hardware (such as a PCI bridge) may indulge in
+ deferral if it so wishes; to flush a store, a load from the same location
+ is preferred[*], but a load from the same device or from configuration
+ space should suffice for PCI.
+
+ [*] NOTE! attempting to load from the same location as was written to may
+ cause a malfunction - consider the 16550 Rx/Tx serial registers for
+ example.
+
+ Used with prefetchable I/O memory, an mmiowb() barrier may be required to
+ force stores to be ordered.
+
+ Please refer to the PCI specification for more information on interactions
+ between PCI transactions.
+
+ (*) readX_relaxed()
+
+ These are similar to readX(), but are not guaranteed to be ordered in any
+ way. Be aware that there is no I/O read barrier available.
+
+ (*) ioreadX(), iowriteX()
+
+ These will perform as appropriate for the type of access they're actually
+ doing, be it inX()/outX() or readX()/writeX().
+
+
+========================================
+ASSUMED MINIMUM EXECUTION ORDERING MODEL
+========================================
+
+It has to be assumed that the conceptual CPU is weakly-ordered but that it will
+maintain the appearance of program causality with respect to itself. Some CPUs
+(such as i386 or x86_64) are more constrained than others (such as powerpc or
+frv), and so the most relaxed case (namely DEC Alpha) must be assumed outside
+of arch-specific code.
+
+This means that it must be considered that the CPU will execute its instruction
+stream in any order it feels like - or even in parallel - provided that if an
+instruction in the stream depends on the an earlier instruction, then that
+earlier instruction must be sufficiently complete[*] before the later
+instruction may proceed; in other words: provided that the appearance of
+causality is maintained.
+
+ [*] Some instructions have more than one effect - such as changing the
+ condition codes, changing registers or changing memory - and different
+ instructions may depend on different effects.
+
+A CPU may also discard any instruction sequence that winds up having no
+ultimate effect. For example, if two adjacent instructions both load an
+immediate value into the same register, the first may be discarded.
+
+
+Similarly, it has to be assumed that compiler might reorder the instruction
+stream in any way it sees fit, again provided the appearance of causality is
+maintained.
+
+
+============================
+THE EFFECTS OF THE CPU CACHE
+============================
+
+The way cached memory operations are perceived across the system is affected to
+a certain extent by the caches that lie between CPUs and memory, and by the
+memory coherence system that maintains the consistency of state in the system.
+
+As far as the way a CPU interacts with another part of the system through the
+caches goes, the memory system has to include the CPU's caches, and memory
+barriers for the most part act at the interface between the CPU and its cache
+(memory barriers logically act on the dotted line in the following diagram):
+
+ <--- CPU ---> : <----------- Memory ----------->
+ :
+ +--------+ +--------+ : +--------+ +-----------+
+ | | | | : | | | | +--------+
+ | CPU | | Memory | : | CPU | | | | |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | |--->| Memory |
+ | | | | : | | | | | |
+ +--------+ +--------+ : +--------+ | | | |
+ : | Cache | +--------+
+ : | Coherency |
+ : | Mechanism | +--------+
+ +--------+ +--------+ : +--------+ | | | |
+ | | | | : | | | | | |
+ | CPU | | Memory | : | CPU | | |--->| Device |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | | | |
+ | | | | : | | | | +--------+
+ +--------+ +--------+ : +--------+ +-----------+
+ :
+ :
+
+Although any particular load or store may not actually appear outside of the
+CPU that issued it since it may have been satisfied within the CPU's own cache,
+it will still appear as if the full memory access had taken place as far as the
+other CPUs are concerned since the cache coherency mechanisms will migrate the
+cacheline over to the accessing CPU and propagate the effects upon conflict.
+
+The CPU core may execute instructions in any order it deems fit, provided the
+expected program causality appears to be maintained. Some of the instructions
+generate load and store operations which then go into the queue of memory
+accesses to be performed. The core may place these in the queue in any order
+it wishes, and continue execution until it is forced to wait for an instruction
+to complete.
+
+What memory barriers are concerned with is controlling the order in which
+accesses cross from the CPU side of things to the memory side of things, and
+the order in which the effects are perceived to happen by the other observers
+in the system.
+
+[!] Memory barriers are _not_ needed within a given CPU, as CPUs always see
+their own loads and stores as if they had happened in program order.
+
+[!] MMIO or other device accesses may bypass the cache system. This depends on
+the properties of the memory window through which devices are accessed and/or
+the use of any special device communication instructions the CPU may have.
+
+
+CACHE COHERENCY
+---------------
+
+Life isn't quite as simple as it may appear above, however: for while the
+caches are expected to be coherent, there's no guarantee that that coherency
+will be ordered. This means that whilst changes made on one CPU will
+eventually become visible on all CPUs, there's no guarantee that they will
+become apparent in the same order on those other CPUs.
+
+
+Consider dealing with a system that has pair of CPUs (1 & 2), each of which has
+a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D):
+
+ :
+ : +--------+
+ : +---------+ | |
+ +--------+ : +--->| Cache A |<------->| |
+ | | : | +---------+ | |
+ | CPU 1 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache B |<------->| |
+ : +---------+ | |
+ : | Memory |
+ : +---------+ | System |
+ +--------+ : +--->| Cache C |<------->| |
+ | | : | +---------+ | |
+ | CPU 2 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache D |<------->| |
+ : +---------+ | |
+ : +--------+
+ :
+
+Imagine the system has the following properties:
+
+ (*) an odd-numbered cache line may be in cache A, cache C or it may still be
+ resident in memory;
+
+ (*) an even-numbered cache line may be in cache B, cache D or it may still be
+ resident in memory;
+
+ (*) whilst the CPU core is interrogating one cache, the other cache may be
+ making use of the bus to access the rest of the system - perhaps to
+ displace a dirty cacheline or to do a speculative load;
+
+ (*) each cache has a queue of operations that need to be applied to that cache
+ to maintain coherency with the rest of the system;
+
+ (*) the coherency queue is not flushed by normal loads to lines already
+ present in the cache, even though the contents of the queue may
+ potentially effect those loads.
+
+Imagine, then, that two writes are made on the first CPU, with a write barrier
+between them to guarantee that they will appear to reach that CPU's caches in
+the requisite order:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb(); Make sure change to v visible before
+ change to p
+ <A:modify v=2> v is now in cache A exclusively
+ p = &v;
+ <B:modify p=&v> p is now in cache B exclusively
+
+The write memory barrier forces the other CPUs in the system to perceive that
+the local CPU's caches have apparently been updated in the correct order. But
+now imagine that the second CPU that wants to read those values:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ ...
+ q = p;
+ x = *q;
+
+The above pair of reads may then fail to happen in expected order, as the
+cacheline holding p may get updated in one of the second CPU's caches whilst
+the update to the cacheline holding v is delayed in the other of the second
+CPU's caches by some other cache event:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+ <A:modify v=2> <C:busy>
+ <C:queue v=2>
+ p = &b; q = p;
+ <D:request p>
+ <B:modify p=&v> <D:commit p=&v>
+ <D:read p>
+ x = *q;
+ <C:read *q> Reads from v before v updated in cache
+ <C:unbusy>
+ <C:commit v=2>
+
+Basically, whilst both cachelines will be updated on CPU 2 eventually, there's
+no guarantee that, without intervention, the order of update will be the same
+as that committed on CPU 1.
+
+
+To intervene, we need to interpolate a data dependency barrier or a read
+barrier between the loads. This will force the cache to commit its coherency
+queue before processing any further requests:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+ <A:modify v=2> <C:busy>
+ <C:queue v=2>
+ p = &b; q = p;
+ <D:request p>
+ <B:modify p=&v> <D:commit p=&v>
+ <D:read p>
+ smp_read_barrier_depends()
+ <C:unbusy>
+ <C:commit v=2>
+ x = *q;
+ <C:read *q> Reads from v after v updated in cache
+
+
+This sort of problem can be encountered on DEC Alpha processors as they have a
+split cache that improves performance by making better use of the data bus.
+Whilst most CPUs do imply a data dependency barrier on the read when a memory
+access depends on a read, not all do, so it may not be relied on.
+
+Other CPUs may also have split caches, but must coordinate between the various
+cachelets for normal memory accesss. The semantics of the Alpha removes the
+need for coordination in absence of memory barriers.
+
+
+CACHE COHERENCY VS DMA
+----------------------
+
+Not all systems maintain cache coherency with respect to devices doing DMA. In
+such cases, a device attempting DMA may obtain stale data from RAM because
+dirty cache lines may be resident in the caches of various CPUs, and may not
+have been written back to RAM yet. To deal with this, the appropriate part of
+the kernel must flush the overlapping bits of cache on each CPU (and maybe
+invalidate them as well).
+
+In addition, the data DMA'd to RAM by a device may be overwritten by dirty
+cache lines being written back to RAM from a CPU's cache after the device has
+installed its own data, or cache lines simply present in a CPUs cache may
+simply obscure the fact that RAM has been updated, until at such time as the
+cacheline is discarded from the CPU's cache and reloaded. To deal with this,
+the appropriate part of the kernel must invalidate the overlapping bits of the
+cache on each CPU.
+
+See Documentation/cachetlb.txt for more information on cache management.
+
+
+CACHE COHERENCY VS MMIO
+-----------------------
+
+Memory mapped I/O usually takes place through memory locations that are part of
+a window in the CPU's memory space that have different properties assigned than
+the usual RAM directed window.
+
+Amongst these properties is usually the fact that such accesses bypass the
+caching entirely and go directly to the device buses. This means MMIO accesses
+may, in effect, overtake accesses to cached memory that were emitted earlier.
+A memory barrier isn't sufficient in such a case, but rather the cache must be
+flushed between the cached memory write and the MMIO access if the two are in
+any way dependent.
+
+
+=========================
+THE THINGS CPUS GET UP TO
+=========================
+
+A programmer might take it for granted that the CPU will perform memory
+operations in exactly the order specified, so that if a CPU is, for example,
+given the following piece of code to execute:
+
+ a = *A;
+ *B = b;
+ c = *C;
+ d = *D;
+ *E = e;
+
+They would then expect that the CPU will complete the memory operation for each
+instruction before moving on to the next one, leading to a definite sequence of
+operations as seen by external observers in the system:
+
+ LOAD *A, STORE *B, LOAD *C, LOAD *D, STORE *E.
+
+
+Reality is, of course, much messier. With many CPUs and compilers, the above
+assumption doesn't hold because:
+
+ (*) loads are more likely to need to be completed immediately to permit
+ execution progress, whereas stores can often be deferred without a
+ problem;
+
+ (*) loads may be done speculatively, and the result discarded should it prove
+ to have been unnecessary;
+
+ (*) loads may be done speculatively, leading to the result having being
+ fetched at the wrong time in the expected sequence of events;
+
+ (*) the order of the memory accesses may be rearranged to promote better use
+ of the CPU buses and caches;
+
+ (*) loads and stores may be combined to improve performance when talking to
+ memory or I/O hardware that can do batched accesses of adjacent locations,
+ thus cutting down on transaction setup costs (memory and PCI devices may
+ both be able to do this); and
+
+ (*) the CPU's data cache may affect the ordering, and whilst cache-coherency
+ mechanisms may alleviate this - once the store has actually hit the cache
+ - there's no guarantee that the coherency management will be propagated in
+ order to other CPUs.
+
+So what another CPU, say, might actually observe from the above piece of code
+is:
+
+ LOAD *A, ..., LOAD {*C,*D}, STORE *E, STORE *B
+
+ (Where "LOAD {*C,*D}" is a combined load)
+
+
+However, it is guaranteed that a CPU will be self-consistent: it will see its
+_own_ accesses appear to be correctly ordered, without the need for a memory
+barrier. For instance with the following code:
+
+ U = *A;
+ *A = V;
+ *A = W;
+ X = *A;
+ *A = Y;
+ Z = *A;
+
+and assuming no intervention by an external influence, it can be assumed that
+the final result will appear to be:
+
+ U == the original value of *A
+ X == W
+ Z == Y
+ *A == Y
+
+The code above may cause the CPU to generate the full sequence of memory
+accesses:
+
+ U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
+
+in that order, but, without intervention, the sequence may have almost any
+combination of elements combined or discarded, provided the program's view of
+the world remains consistent.
+
+The compiler may also combine, discard or defer elements of the sequence before
+the CPU even sees them.
+
+For instance:
+
+ *A = V;
+ *A = W;
+
+may be reduced to:
+
+ *A = W;
+
+since, without a write barrier, it can be assumed that the effect of the
+storage of V to *A is lost. Similarly:
+
+ *A = Y;
+ Z = *A;
+
+may, without a memory barrier, be reduced to:
+
+ *A = Y;
+ Z = Y;
+
+and the LOAD operation never appear outside of the CPU.
+
+
+AND THEN THERE'S THE ALPHA
+--------------------------
+
+The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
+some versions of the Alpha CPU have a split data cache, permitting them to have
+two semantically related cache lines updating at separate times. This is where
+the data dependency barrier really becomes necessary as this synchronises both
+caches with the memory coherence system, thus making it seem like pointer
+changes vs new data occur in the right order.
+
+The Alpha defines the Linux's kernel's memory barrier model.
+
+See the subsection on "Cache Coherency" above.
+
+
+==========
+REFERENCES
+==========
+
+Alpha AXP Architecture Reference Manual, Second Edition (Sites & Witek,
+Digital Press)
+ Chapter 5.2: Physical Address Space Characteristics
+ Chapter 5.4: Caches and Write Buffers
+ Chapter 5.5: Data Sharing
+ Chapter 5.6: Read/Write Ordering
+
+AMD64 Architecture Programmer's Manual Volume 2: System Programming
+ Chapter 7.1: Memory-Access Ordering
+ Chapter 7.4: Buffering and Combining Memory Writes
+
+IA-32 Intel Architecture Software Developer's Manual, Volume 3:
+System Programming Guide
+ Chapter 7.1: Locked Atomic Operations
+ Chapter 7.2: Memory Ordering
+ Chapter 7.4: Serializing Instructions
+
+The SPARC Architecture Manual, Version 9
+ Chapter 8: Memory Models
+ Appendix D: Formal Specification of the Memory Models
+ Appendix J: Programming with the Memory Models
+
+UltraSPARC Programmer Reference Manual
+ Chapter 5: Memory Accesses and Cacheability
+ Chapter 15: Sparc-V9 Memory Models
+
+UltraSPARC III Cu User's Manual
+ Chapter 9: Memory Models
+
+UltraSPARC IIIi Processor User's Manual
+ Chapter 8: Memory Models
+
+UltraSPARC Architecture 2005
+ Chapter 9: Memory
+ Appendix D: Formal Specifications of the Memory Models
+
+UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005
+ Chapter 8: Memory Models
+ Appendix F: Caches and Cache Coherency
+
+Solaris Internals, Core Kernel Architecture, p63-68:
+ Chapter 3.3: Hardware Considerations for Locks and
+ Synchronization
+
+Unix Systems for Modern Architectures, Symmetric Multiprocessing and Caching
+for Kernel Programmers:
+ Chapter 13: Other Memory Models
+
+Intel Itanium Architecture Software Developer's Manual: Volume 1:
+ Section 2.6: Speculation
+ Section 4.4: Memory Access
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index 1898ea7..9d6186d 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -216,8 +216,6 @@
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_ALPHA_IRONGATE
EXPORT_SYMBOL(irongate_ioremap);
EXPORT_SYMBOL(irongate_iounmap);
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 44866cb..7f6a984 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -435,7 +435,7 @@
str = pchar;
} while(*str);
- return 0;
+ return 1;
}
__setup("io7=", marvel_specify_io7);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba46d77..e91db54 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -839,6 +839,8 @@
source "drivers/mfd/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 978d32e..3cd8c9e 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/leds.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -75,6 +76,7 @@
struct sharpsl_pm_status sharpsl_pm;
DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
static int get_percentage(int voltage)
@@ -190,10 +192,10 @@
dev_err(sharpsl_pm.dev, "Charging Error!\n");
} else if (val == SHARPSL_LED_ON) {
dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
} else {
dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
}
}
@@ -786,6 +788,8 @@
init_timer(&sharpsl_pm.chrg_full_timer);
sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->init();
device_create_file(&pdev->dev, &dev_attr_battery_percentage);
@@ -807,6 +811,8 @@
device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->exit();
del_timer_sync(&sharpsl_pm.chrg_full_timer);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 489c069..1ff75ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -474,4 +474,3 @@
} while (count ++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 68923b1..d6d7260 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -141,6 +141,8 @@
*/
static struct corgibl_machinfo corgi_bl_machinfo = {
.max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
};
@@ -164,6 +166,14 @@
/*
+ * Corgi LEDs
+ */
+static struct platform_device corgiled_device = {
+ .name = "corgi-led",
+ .id = -1,
+};
+
+/*
* Corgi Touch Screen Device
*/
static struct resource corgits_resources[] = {
@@ -297,6 +307,7 @@
&corgikbd_device,
&corgibl_device,
&corgits_device,
+ &corgiled_device,
};
static void __init corgi_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 0dbb079..19b372d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -220,6 +220,8 @@
* Spitz Backlight Device
*/
static struct corgibl_machinfo spitz_bl_machinfo = {
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.max_intensity = 0x2f,
};
@@ -242,6 +244,14 @@
/*
+ * Spitz LEDs
+ */
+static struct platform_device spitzled_device = {
+ .name = "spitz-led",
+ .id = -1,
+};
+
+/*
* Spitz Touch Screen Device
*/
static struct resource spitzts_resources[] = {
@@ -418,6 +428,7 @@
&spitzkbd_device,
&spitzts_device,
&spitzbl_device,
+ &spitzled_device,
};
static void __init common_init(void)
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 66ec717..76c0e7f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -251,10 +251,19 @@
.id = -1,
};
+/*
+ * Tosa LEDs
+ */
+static struct platform_device tosaled_device = {
+ .name = "tosa-led",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
+ &tosaled_device,
};
static void __init tosa_init(void)
diff --git a/arch/arm26/kernel/armksyms.c b/arch/arm26/kernel/armksyms.c
index 811a6376c..a6a1b33 100644
--- a/arch/arm26/kernel/armksyms.c
+++ b/arch/arm26/kernel/armksyms.c
@@ -212,8 +212,6 @@
EXPORT_SYMBOL(sys_exit);
EXPORT_SYMBOL(sys_wait4);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_PREEMPT
EXPORT_SYMBOL(kernel_flag);
#endif
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index aa6b7d0..07c8ffa 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -79,8 +79,6 @@
EXPORT_SYMBOL(__outsl_ns);
EXPORT_SYMBOL(__insl_ns);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
EXPORT_SYMBOL(atomic_test_and_ANDNOT_mask);
EXPORT_SYMBOL(atomic_test_and_OR_mask);
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
index 69d6ad3..b6cd78c 100644
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -55,8 +55,6 @@
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index eb5279d..6273bf7 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -415,6 +415,7 @@
void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, ver, maxlvt;
+ int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
if (esr_disable) {
@@ -452,6 +453,25 @@
apic_write_around(APIC_TASKPRI, value);
/*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j))
+ ack_APIC_irq();
+ }
+ }
+
+ /*
* Now that we are all set up, enable the APIC
*/
value = apic_read(APIC_SPIV);
@@ -732,7 +752,7 @@
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug\n", str);
- return 0;
+ return 1;
}
__setup("apic=", apic_set_verbosity);
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
index 6170af3..afa0888 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.c
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -64,13 +64,13 @@
static int __init mcheck_disable(char *str)
{
mce_disabled = 1;
- return 0;
+ return 1;
}
static int __init mcheck_enable(char *str)
{
mce_disabled = -1;
- return 0;
+ return 1;
}
__setup("nomce", mcheck_disable);
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 3b329af..f8f132a 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -644,7 +644,7 @@
int __init irqbalance_disable(char *str)
{
irqbalance_disabled = 1;
- return 0;
+ return 1;
}
__setup("noirqbalance", irqbalance_disable);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index 24b3e74..6259afe 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -781,7 +781,6 @@
} while (count++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
/*
* sys_alloc_thread_area: get a yet unused TLS descriptor index.
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index ce3ef4f..4f58b9c 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -313,3 +313,4 @@
.long sys_set_robust_list
.long sys_get_robust_list
.long sys_splice
+ .long sys_sync_file_range
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 6b63a5a..e385279 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -1193,6 +1193,6 @@
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s, NULL, 0);
- return 0;
+ return 1;
}
__setup("kstack=", kstack_setup);
diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S
index fadb5bc..a92262f 100644
--- a/arch/i386/kernel/vsyscall-sigreturn.S
+++ b/arch/i386/kernel/vsyscall-sigreturn.S
@@ -44,7 +44,7 @@
.LSTARTCIEDLSI1:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 1 /* Code alignment factor */
.sleb128 -4 /* Data alignment factor */
.byte 8 /* Return address register column */
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 3d7f200..c331951 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -79,4 +79,3 @@
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c
index d844c75..f9b4ea1 100644
--- a/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/arch/m68knommu/kernel/m68k_ksyms.c
@@ -57,8 +57,6 @@
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a8f435d..c66db5e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -419,4 +419,3 @@
return pc;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 211d726..764d073 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -61,7 +61,7 @@
if (p)
elfcorehdr_addr = memparse(p, &p);
- return 0;
+ return 1;
}
__setup("elfcorehdr=", parse_elfcorehdr);
#endif
@@ -71,7 +71,7 @@
if (p)
saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
- return 0;
+ return 1;
}
__setup("savemaxmem=", parse_savemaxmem);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 706090c..2dd47d2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -834,7 +834,6 @@
} while (count++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
static int kstack_depth_to_print = 64;
diff --git a/arch/powerpc/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S
index e046427..0c6a37b 100644
--- a/arch/powerpc/kernel/vdso32/sigtramp.S
+++ b/arch/powerpc/kernel/vdso32/sigtramp.S
@@ -261,7 +261,7 @@
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -4 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/arch/powerpc/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S
index 31b604a..7479edb 100644
--- a/arch/powerpc/kernel/vdso64/sigtramp.S
+++ b/arch/powerpc/kernel/vdso64/sigtramp.S
@@ -263,7 +263,7 @@
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -8 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2b8841f..343120c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -801,7 +801,7 @@
*/
print_cpu_info(&S390_lowcore.cpu_data);
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
lowcore_ptr[i] = (struct _lowcore *)
__get_free_pages(GFP_KERNEL|GFP_DMA,
sizeof(void*) == 8 ? 1 : 0);
@@ -831,7 +831,7 @@
#endif
set_prefix((u32)(unsigned long) lowcore_ptr[smp_processor_id()]);
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
if (cpu != smp_processor_id())
smp_create_idle(cpu);
}
@@ -868,7 +868,7 @@
int cpu;
int ret;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index cf94e8e..868e68b 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -30,7 +30,7 @@
static int __init x##_setup(char *opts) \
{ \
x##_disabled = 1; \
- return 0; \
+ return 1; \
} \
__setup("no" __stringify(x), x##_setup);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 7ee4ca2..bb229ef 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -401,7 +401,7 @@
{
int cpu_id;
- for_each_cpu(cpu_id)
+ for_each_possible_cpu(cpu_id)
register_cpu(&cpu[cpu_id], cpu_id, NULL);
return 0;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 5982fe2..05fbb20 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -22,6 +22,9 @@
config PCI
bool
+config PCMCIA
+ bool
+
config GENERIC_CALIBRATE_DELAY
bool
default y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 8d14c7a..24790be 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -20,7 +20,7 @@
# Have to precede the include because the included Makefiles reference them.
SYMLINK_HEADERS := archparam.h system.h sigcontext.h processor.h ptrace.h \
- module.h vm-flags.h elf.h ldt.h
+ module.h vm-flags.h elf.h host_ldt.h
SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
# XXX: The "os" symlink is only used by arch/um/include/os.h, which includes
@@ -129,7 +129,7 @@
-DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
-DELF_FORMAT="$(ELF_FORMAT)" $(CPP_MODE-y) \
-DKERNEL_STACK_SIZE=$(STACK_SIZE) \
- -DUNMAP_PATH=arch/um/sys-$(SUBARCH)/unmap_fin.o
+ -DUNMAP_PATH=arch/um/sys-$(SUBARCH)/unmap.o
#The wrappers will select whether using "malloc" or the kernel allocator.
LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
@@ -150,8 +150,7 @@
$(ARCH_DIR)/include/user_constants.h \
$(ARCH_DIR)/include/kern_constants.h $(ARCH_DIR)/Kconfig.arch
-MRPROPER_FILES += $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) \
- $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os
+MRPROPER_FILES += $(ARCH_SYMLINKS)
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 38df311..dfd88b6 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -1,7 +1,7 @@
# Copyright 2003 - 2004 Pathscale, Inc
# Released under the GPL
-libs-y += arch/um/sys-x86_64/
+core-y += arch/um/sys-x86_64/
START := 0x60000000
#We #undef __x86_64__ for kernelspace, not for userspace where
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
index a61b7b4..53d09ed 100644
--- a/arch/um/drivers/daemon_kern.c
+++ b/arch/um/drivers/daemon_kern.c
@@ -95,18 +95,7 @@
static int register_daemon(void)
{
register_transport(&daemon_transport);
- return(1);
+ return 0;
}
__initcall(register_daemon);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index 49acb2b..d18a974 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -104,7 +104,7 @@
extern int ping_watchdog(int fd);
-static ssize_t harddog_write(struct file *file, const char *data, size_t len,
+static ssize_t harddog_write(struct file *file, const char __user *data, size_t len,
loff_t *ppos)
{
/*
@@ -118,6 +118,7 @@
static int harddog_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ void __user *argp= (void __user *)arg;
static struct watchdog_info ident = {
WDIOC_SETTIMEOUT,
0,
@@ -127,13 +128,12 @@
default:
return -ENOTTY;
case WDIOC_GETSUPPORT:
- if(copy_to_user((struct harddog_info *)arg, &ident,
- sizeof(ident)))
+ if(copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- return put_user(0,(int *)arg);
+ return put_user(0,(int __user *)argp);
case WDIOC_KEEPALIVE:
return(ping_watchdog(harddog_out_fd));
}
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index 59602b8..37232f9 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -67,8 +67,8 @@
/* /dev/dsp file operations */
-static ssize_t hostaudio_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos)
+static ssize_t hostaudio_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
void *kbuf;
@@ -94,7 +94,7 @@
return(err);
}
-static ssize_t hostaudio_write(struct file *file, const char *buffer,
+static ssize_t hostaudio_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
@@ -152,7 +152,7 @@
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
- if(get_user(data, (int *) arg))
+ if(get_user(data, (int __user *) arg))
return(-EFAULT);
break;
default:
@@ -168,7 +168,7 @@
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
- if(put_user(data, (int *) arg))
+ if(put_user(data, (int __user *) arg))
return(-EFAULT);
break;
default:
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index c9b078f..3a7af18 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -124,18 +124,7 @@
static int register_mcast(void)
{
register_transport(&mcast_transport);
- return(1);
+ return 0;
}
__initcall(register_mcast);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 1488816..28e3760 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -20,6 +20,8 @@
#include "linux/namei.h"
#include "linux/proc_fs.h"
#include "linux/syscalls.h"
+#include "linux/list.h"
+#include "linux/mm.h"
#include "linux/console.h"
#include "asm/irq.h"
#include "asm/uaccess.h"
@@ -347,6 +349,142 @@
return(NULL);
}
+#define UNPLUGGED_PER_PAGE \
+ ((PAGE_SIZE - sizeof(struct list_head)) / sizeof(unsigned long))
+
+struct unplugged_pages {
+ struct list_head list;
+ void *pages[UNPLUGGED_PER_PAGE];
+};
+
+static unsigned long long unplugged_pages_count = 0;
+static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages);
+static int unplug_index = UNPLUGGED_PER_PAGE;
+
+static int mem_config(char *str)
+{
+ unsigned long long diff;
+ int err = -EINVAL, i, add;
+ char *ret;
+
+ if(str[0] != '=')
+ goto out;
+
+ str++;
+ if(str[0] == '-')
+ add = 0;
+ else if(str[0] == '+'){
+ add = 1;
+ }
+ else goto out;
+
+ str++;
+ diff = memparse(str, &ret);
+ if(*ret != '\0')
+ goto out;
+
+ diff /= PAGE_SIZE;
+
+ for(i = 0; i < diff; i++){
+ struct unplugged_pages *unplugged;
+ void *addr;
+
+ if(add){
+ if(list_empty(&unplugged_pages))
+ break;
+
+ unplugged = list_entry(unplugged_pages.next,
+ struct unplugged_pages, list);
+ if(unplug_index > 0)
+ addr = unplugged->pages[--unplug_index];
+ else {
+ list_del(&unplugged->list);
+ addr = unplugged;
+ unplug_index = UNPLUGGED_PER_PAGE;
+ }
+
+ free_page((unsigned long) addr);
+ unplugged_pages_count--;
+ }
+ else {
+ struct page *page;
+
+ page = alloc_page(GFP_ATOMIC);
+ if(page == NULL)
+ break;
+
+ unplugged = page_address(page);
+ if(unplug_index == UNPLUGGED_PER_PAGE){
+ INIT_LIST_HEAD(&unplugged->list);
+ list_add(&unplugged->list, &unplugged_pages);
+ unplug_index = 0;
+ }
+ else {
+ struct list_head *entry = unplugged_pages.next;
+ addr = unplugged;
+
+ unplugged = list_entry(entry,
+ struct unplugged_pages,
+ list);
+ unplugged->pages[unplug_index++] = addr;
+ err = os_drop_memory(addr, PAGE_SIZE);
+ if(err)
+ printk("Failed to release memory - "
+ "errno = %d\n", err);
+ }
+
+ unplugged_pages_count++;
+ }
+ }
+
+ err = 0;
+out:
+ return err;
+}
+
+static int mem_get_config(char *name, char *str, int size, char **error_out)
+{
+ char buf[sizeof("18446744073709551615")];
+ int len = 0;
+
+ sprintf(buf, "%ld", uml_physmem);
+ CONFIG_CHUNK(str, size, len, buf, 1);
+
+ return len;
+}
+
+static int mem_id(char **str, int *start_out, int *end_out)
+{
+ *start_out = 0;
+ *end_out = 0;
+
+ return 0;
+}
+
+static int mem_remove(int n)
+{
+ return -EBUSY;
+}
+
+static struct mc_device mem_mc = {
+ .name = "mem",
+ .config = mem_config,
+ .get_config = mem_get_config,
+ .id = mem_id,
+ .remove = mem_remove,
+};
+
+static int mem_mc_init(void)
+{
+ if(can_drop_memory())
+ mconsole_register_dev(&mem_mc);
+ else printk("Can't release memory to the host - memory hotplug won't "
+ "be supported\n");
+ return 0;
+}
+
+__initcall(mem_mc_init);
+
#define CONFIG_BUF_SIZE 64
static void mconsole_get_config(int (*get_config)(char *, char *, int,
@@ -478,7 +616,7 @@
return;
while(1){
- n = min(len, ARRAY_SIZE(console_buf) - console_index);
+ n = min((size_t)len, ARRAY_SIZE(console_buf) - console_index);
strncpy(&console_buf[console_index], string, n);
console_index += n;
string += n;
diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c
index 07c80f2..466ff2c 100644
--- a/arch/um/drivers/pcap_kern.c
+++ b/arch/um/drivers/pcap_kern.c
@@ -106,18 +106,7 @@
static int register_pcap(void)
{
register_transport(&pcap_transport);
- return(1);
+ return 0;
}
__initcall(register_pcap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index a62f5ef..163ee0d 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -93,18 +93,7 @@
static int register_slip(void)
{
register_transport(&slip_transport);
- return(1);
+ return 0;
}
__initcall(register_slip);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index 33d7982..95e50c9 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -77,7 +77,7 @@
int i=0;
*init = ((struct slirp_init)
- { argw : { { "slirp", NULL } } });
+ { .argw = { { "slirp", NULL } } });
str = split_if_spec(str, mac_out, NULL);
@@ -116,18 +116,7 @@
static int register_slirp(void)
{
register_transport(&slirp_transport);
- return(1);
+ return 0;
}
__initcall(register_slirp);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 0336575..0897852 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -891,7 +891,7 @@
SA_INTERRUPT, "ubd", ubd_dev);
if(err != 0)
printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
- return(err);
+ return 0;
}
device_initcall(ubd_driver_init);
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index 07176d9..4255713 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -116,7 +116,11 @@
extern struct task_struct *get_task(int pid, int require);
extern void machine_halt(void);
extern int is_syscall(unsigned long addr);
-extern void arch_switch(void);
+
+extern void arch_switch_to_tt(struct task_struct *from, struct task_struct *to);
+
+extern void arch_switch_to_skas(struct task_struct *from, struct task_struct *to);
+
extern void free_irq(unsigned int, void *);
extern int cpu(void);
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 6f4d680..6ac0f82 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,23 +58,17 @@
};
#define LINE_INIT(str, d) \
- { init_str : str, \
- init_pri : INIT_STATIC, \
- valid : 1, \
- throttled : 0, \
- lock : SPIN_LOCK_UNLOCKED, \
- buffer : NULL, \
- head : NULL, \
- tail : NULL, \
- sigio : 0, \
- driver : d, \
- have_irq : 0 }
+ { .init_str = str, \
+ .init_pri = INIT_STATIC, \
+ .valid = 1, \
+ .lock = SPIN_LOCK_UNLOCKED, \
+ .driver = d }
struct lines {
int num;
};
-#define LINES_INIT(n) { num : n }
+#define LINES_INIT(n) { .num = n }
extern void line_close(struct tty_struct *tty, struct file * filp);
extern int line_open(struct line *lines, struct tty_struct *tty);
diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h
index a1064c5..a54514d 100644
--- a/arch/um/include/mem_user.h
+++ b/arch/um/include/mem_user.h
@@ -49,7 +49,6 @@
extern unsigned long host_task_size;
extern unsigned long task_size;
-extern void check_devanon(void);
extern int init_mem_user(void);
extern void setup_memory(void *entry);
extern unsigned long find_iomem(char *driver, unsigned long *len_out);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index d3d1bc6..f88856c 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -13,6 +13,7 @@
#include "kern_util.h"
#include "skas/mm_id.h"
#include "irq_user.h"
+#include "sysdep/tls.h"
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
@@ -172,6 +173,7 @@
extern void os_early_checks(void);
extern int can_do_skas(void);
extern void os_check_bugs(void);
+extern void check_host_supports_tls(int *supports_tls, int *tls_min);
/* Make sure they are clear when running in TT mode. Required by
* SEGV_MAYBE_FIXABLE */
@@ -205,6 +207,8 @@
extern int os_protect_memory(void *addr, unsigned long len,
int r, int w, int x);
extern int os_unmap_memory(void *addr, int len);
+extern int os_drop_memory(void *addr, int length);
+extern int can_drop_memory(void);
extern void os_flush_stdout(void);
/* tt.c
@@ -234,8 +238,12 @@
int stack_order);
extern int helper_wait(int pid);
-/* umid.c */
+/* tls.c */
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+/* umid.c */
extern int umid_file_name(char *name, char *buf, int len);
extern int set_umid(char *name);
extern char *get_umid(void);
diff --git a/arch/um/include/sysdep-i386/checksum.h b/arch/um/include/sysdep-i386/checksum.h
index 7d3d202..052bb06 100644
--- a/arch/um/include/sysdep-i386/checksum.h
+++ b/arch/um/include/sysdep-i386/checksum.h
@@ -48,7 +48,8 @@
*/
static __inline__
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
+unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+ unsigned char *dst,
int len, int sum, int *err_ptr)
{
if(copy_from_user(dst, src, len)){
@@ -192,7 +193,7 @@
*/
#define HAVE_CSUM_COPY_USER
static __inline__ unsigned int csum_and_copy_to_user(const unsigned char *src,
- unsigned char *dst,
+ unsigned char __user *dst,
int len, int sum, int *err_ptr)
{
if (access_ok(VERIFY_WRITE, dst, len)){
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index c8ee955..6670cc9 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -14,7 +14,12 @@
#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#ifdef UML_CONFIG_PT_PROXY
extern void update_debugregs(int seq);
+#else
+static inline void update_debugregs(int seq) {}
+#endif
+
/* syscall emulation path in ptrace */
diff --git a/arch/um/include/sysdep-i386/tls.h b/arch/um/include/sysdep-i386/tls.h
new file mode 100644
index 0000000..918fd3c
--- /dev/null
+++ b/arch/um/include/sysdep-i386/tls.h
@@ -0,0 +1,32 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+# include <asm/ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+
+#define GDT_ENTRY_TLS_MIN_I386 6
+#define GDT_ENTRY_TLS_MIN_X86_64 12
+
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/sysdep-x86_64/tls.h b/arch/um/include/sysdep-x86_64/tls.h
new file mode 100644
index 0000000..35f19f2
--- /dev/null
+++ b/arch/um/include/sysdep-x86_64/tls.h
@@ -0,0 +1,29 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+ unsigned int lm:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+# include <asm/ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h
index 992a7e1..fe0c29b 100644
--- a/arch/um/include/user_util.h
+++ b/arch/um/include/user_util.h
@@ -8,6 +8,9 @@
#include "sysdep/ptrace.h"
+/* Copied from kernel.h */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
extern int mode_tt;
@@ -31,7 +34,7 @@
extern unsigned long uml_reserved;
extern unsigned long end_vm;
extern unsigned long start_vm;
-extern unsigned long highmem;
+extern unsigned long long highmem;
extern char host_info[];
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 1ca8431..c0cb627 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -22,6 +22,7 @@
void flush_thread(void)
{
+ arch_flush_thread(¤t->thread.arch);
CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
}
@@ -58,14 +59,14 @@
return(err);
}
-long sys_execve(char *file, char __user *__user *argv,
+long sys_execve(char __user *file, char __user *__user *argv,
char __user *__user *env)
{
long error;
char *filename;
lock_kernel();
- filename = getname((char __user *) file);
+ filename = getname(file);
error = PTR_ERR(filename);
if (IS_ERR(filename)) goto out;
error = execve1(filename, argv, env);
@@ -74,14 +75,3 @@
unlock_kernel();
return(error);
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 92cce96..44e41a3 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -30,7 +30,7 @@
unsigned long *empty_zero_page = NULL;
unsigned long *empty_bad_page = NULL;
pgd_t swapper_pg_dir[PTRS_PER_PGD];
-unsigned long highmem;
+unsigned long long highmem;
int kmalloc_ok = 0;
static unsigned long brk_end;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index 3113cab..f6a5a50 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -156,9 +156,25 @@
unsigned long stack_top, struct task_struct * p,
struct pt_regs *regs)
{
+ int ret;
+
p->thread = (struct thread_struct) INIT_THREAD;
- return(CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr,
- clone_flags, sp, stack_top, p, regs));
+ ret = CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr,
+ clone_flags, sp, stack_top, p, regs);
+
+ if (ret || !current->thread.forking)
+ goto out;
+
+ clear_flushed_tls(p);
+
+ /*
+ * Set a new TLS for the child thread?
+ */
+ if (clone_flags & CLONE_SETTLS)
+ ret = arch_copy_tls(p);
+
+out:
+ return ret;
}
void initial_thread_cb(void (*proc)(void *), void *arg)
@@ -185,10 +201,6 @@
{
CHOOSE_MODE(uml_idle_timer(), (void) 0);
- atomic_inc(&init_mm.mm_count);
- current->mm = &init_mm;
- current->active_mm = &init_mm;
-
while(1){
/* endless idle loop with no priority at all */
@@ -407,7 +419,7 @@
return strlen(buf);
}
-static int proc_write_sysemu(struct file *file,const char *buf, unsigned long count,void *data)
+static int proc_write_sysemu(struct file *file,const char __user *buf, unsigned long count,void *data)
{
char tmp[2];
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 98e0939..60d2eda 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -46,6 +46,7 @@
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int i, ret;
+ unsigned long __user *p = (void __user *)(unsigned long)data;
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
@@ -58,7 +59,7 @@
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp, (unsigned long __user *) data);
+ ret = put_user(tmp, p);
break;
}
@@ -136,15 +137,13 @@
#ifdef PTRACE_GETREGS
case PTRACE_GETREGS: { /* Get all gp regs from the child. */
- if (!access_ok(VERIFY_WRITE, (unsigned long *)data,
- MAX_REG_OFFSET)) {
+ if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) {
ret = -EIO;
break;
}
for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) {
- __put_user(getreg(child, i),
- (unsigned long __user *) data);
- data += sizeof(long);
+ __put_user(getreg(child, i), p);
+ p++;
}
ret = 0;
break;
@@ -153,15 +152,14 @@
#ifdef PTRACE_SETREGS
case PTRACE_SETREGS: { /* Set all gp regs in the child. */
unsigned long tmp = 0;
- if (!access_ok(VERIFY_READ, (unsigned *)data,
- MAX_REG_OFFSET)) {
+ if (!access_ok(VERIFY_READ, p, MAX_REG_OFFSET)) {
ret = -EIO;
break;
}
for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) {
- __get_user(tmp, (unsigned long __user *) data);
+ __get_user(tmp, p);
putreg(child, i, tmp);
- data += sizeof(long);
+ p++;
}
ret = 0;
break;
@@ -187,14 +185,23 @@
ret = set_fpxregs(data, child);
break;
#endif
+ case PTRACE_GET_THREAD_AREA:
+ ret = ptrace_get_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
+ case PTRACE_SET_THREAD_AREA:
+ ret = ptrace_set_thread_area(child, addr,
+ (struct user_desc __user *) data);
+ break;
+
case PTRACE_FAULTINFO: {
- /* Take the info from thread->arch->faultinfo,
- * but transfer max. sizeof(struct ptrace_faultinfo).
- * On i386, ptrace_faultinfo is smaller!
- */
- ret = copy_to_user((unsigned long __user *) data,
- &child->thread.arch.faultinfo,
- sizeof(struct ptrace_faultinfo));
+ /* Take the info from thread->arch->faultinfo,
+ * but transfer max. sizeof(struct ptrace_faultinfo).
+ * On i386, ptrace_faultinfo is smaller!
+ */
+ ret = copy_to_user(p, &child->thread.arch.faultinfo,
+ sizeof(struct ptrace_faultinfo));
if(ret)
break;
break;
@@ -204,8 +211,7 @@
case PTRACE_LDT: {
struct ptrace_ldt ldt;
- if(copy_from_user(&ldt, (unsigned long __user *) data,
- sizeof(ldt))){
+ if(copy_from_user(&ldt, p, sizeof(ldt))){
ret = -EIO;
break;
}
diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c
index 3f70a2e..2135eaf 100644
--- a/arch/um/kernel/skas/process_kern.c
+++ b/arch/um/kernel/skas/process_kern.c
@@ -35,6 +35,8 @@
switch_threads(&from->thread.mode.skas.switch_buf,
to->thread.mode.skas.switch_buf);
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
if(current->pid == 0)
switch_timers(1);
}
@@ -89,10 +91,17 @@
panic("blech");
schedule_tail(current->thread.prev_sched);
+
+ /* XXX: if interrupt_end() calls schedule, this call to
+ * arch_switch_to_skas isn't needed. We could want to apply this to
+ * improve performance. -bb */
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
current->thread.prev_sched = NULL;
/* Handle any immediate reschedules or signals */
interrupt_end();
+
userspace(¤t->thread.regs.regs);
}
@@ -109,6 +118,8 @@
if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp;
handler = fork_handler;
+
+ arch_copy_thread(¤t->thread.arch, &p->thread.arch);
}
else {
init_thread_registers(&p->thread.regs.regs);
diff --git a/arch/um/kernel/syscall_kern.c b/arch/um/kernel/syscall_kern.c
index 8e1a350..37d3978 100644
--- a/arch/um/kernel/syscall_kern.c
+++ b/arch/um/kernel/syscall_kern.c
@@ -104,7 +104,7 @@
}
-long sys_uname(struct old_utsname * name)
+long sys_uname(struct old_utsname __user * name)
{
long err;
if (!name)
@@ -115,7 +115,7 @@
return err?-EFAULT:0;
}
-long sys_olduname(struct oldold_utsname * name)
+long sys_olduname(struct oldold_utsname __user * name)
{
long error;
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index d56046c..02f6d4d 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -198,7 +198,7 @@
si.si_signo = SIGBUS;
si.si_errno = 0;
si.si_code = BUS_ADRERR;
- si.si_addr = (void *)address;
+ si.si_addr = (void __user *)address;
current->thread.arch.faultinfo = fi;
force_sig_info(SIGBUS, &si, current);
} else if (err == -ENOMEM) {
@@ -207,7 +207,7 @@
} else {
BUG_ON(err != -EFAULT);
si.si_signo = SIGSEGV;
- si.si_addr = (void *) address;
+ si.si_addr = (void __user *) address;
current->thread.arch.faultinfo = fi;
force_sig_info(SIGSEGV, &si, current);
}
@@ -220,8 +220,8 @@
si.si_signo = SIGSEGV;
si.si_code = SEGV_ACCERR;
- si.si_addr = (void *) FAULT_ADDRESS(fi);
- current->thread.arch.faultinfo = fi;
+ si.si_addr = (void __user *) FAULT_ADDRESS(fi);
+ current->thread.arch.faultinfo = fi;
force_sig_info(SIGSEGV, &si, current);
}
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index 295c1ac..a9c1443 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -51,6 +51,13 @@
c = 0;
+ /* Notice that here we "up" the semaphore on which "to" is waiting, and
+ * below (the read) we wait on this semaphore (which is implemented by
+ * switch_pipe) and go sleeping. Thus, after that, we have resumed in
+ * "to", and can't use any more the value of "from" (which is outdated),
+ * nor the value in "to" (since it was the task which stole us the CPU,
+ * which we don't care about). */
+
err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c));
if(err != sizeof(c))
panic("write of switch_pipe failed, err = %d", -err);
@@ -77,7 +84,7 @@
change_sig(SIGALRM, alrm);
change_sig(SIGPROF, prof);
- arch_switch();
+ arch_switch_to_tt(prev_sched, current);
flush_tlb_all();
local_irq_restore(flags);
@@ -141,7 +148,6 @@
set_cmdline("(kernel thread)");
change_sig(SIGUSR1, 1);
- change_sig(SIGVTALRM, 1);
change_sig(SIGPROF, 1);
local_irq_enable();
if(!run_kernel_thread(fn, arg, ¤t->thread.exec_buf))
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index 1659386..f4bfc4c 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -4,7 +4,7 @@
#
obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \
- signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \
+ signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o tls.o \
user_syms.o util.o drivers/ sys-$(SUBARCH)/
obj-$(CONFIG_MODE_SKAS) += skas/
@@ -12,12 +12,9 @@
user-objs-$(CONFIG_TTY_LOG) += tty_log.o
USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \
- process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o \
+ process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o tls.o \
uaccess.o umid.o util.o
-elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
-CFLAGS_elf_aux.o += -I$(objtree)/arch/um
-
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
HAVE_AIO_ABI := $(shell [ -r /usr/include/linux/aio_abi.h ] && \
diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c
index 6ae4b19..768606b 100644
--- a/arch/um/os-Linux/drivers/ethertap_kern.c
+++ b/arch/um/os-Linux/drivers/ethertap_kern.c
@@ -102,18 +102,7 @@
static int register_ethertap(void)
{
register_transport(ðertap_transport);
- return(1);
+ return 0;
}
__initcall(register_ethertap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c
index 4202b9e..190009a 100644
--- a/arch/um/os-Linux/drivers/tuntap_kern.c
+++ b/arch/um/os-Linux/drivers/tuntap_kern.c
@@ -87,18 +87,7 @@
static int register_tuntap(void)
{
register_transport(&tuntap_transport);
- return(1);
+ return 0;
}
__initcall(register_tuntap);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 9d7d69a..6ab372d 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -121,36 +121,11 @@
return(fd);
}
-static int create_anon_file(unsigned long long len)
-{
- void *addr;
- int fd;
-
- fd = open("/dev/anon", O_RDWR);
- if(fd < 0) {
- perror("opening /dev/anon");
- exit(1);
- }
-
- addr = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
- if(addr == MAP_FAILED){
- perror("mapping physmem file");
- exit(1);
- }
- munmap(addr, len);
-
- return(fd);
-}
-
-extern int have_devanon;
-
int create_mem_file(unsigned long long len)
{
int err, fd;
- if(have_devanon)
- fd = create_anon_file(len);
- else fd = create_tmp_file(len);
+ fd = create_tmp_file(len);
err = os_set_exec_close(fd, 1);
if(err < 0){
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index d261888..8176b0b 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -11,6 +11,7 @@
#include <linux/unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
+#include <sys/mman.h>
#include "ptrace_user.h"
#include "os.h"
#include "user.h"
@@ -20,6 +21,7 @@
#include "kern_util.h"
#include "longjmp.h"
#include "skas_ptrace.h"
+#include "kern_constants.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -187,6 +189,48 @@
return(0);
}
+#ifndef MADV_REMOVE
+#define MADV_REMOVE 0x5 /* remove these pages & resources */
+#endif
+
+int os_drop_memory(void *addr, int length)
+{
+ int err;
+
+ err = madvise(addr, length, MADV_REMOVE);
+ if(err < 0)
+ err = -errno;
+ return err;
+}
+
+int can_drop_memory(void)
+{
+ void *addr;
+ int fd;
+
+ printk("Checking host MADV_REMOVE support...");
+ fd = create_mem_file(UM_KERN_PAGE_SIZE);
+ if(fd < 0){
+ printk("Creating test memory file failed, err = %d\n", -fd);
+ return 0;
+ }
+
+ addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE, fd, 0);
+ if(addr == MAP_FAILED){
+ printk("Mapping test memory file failed, err = %d\n", -errno);
+ return 0;
+ }
+
+ if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){
+ printk("MADV_REMOVE failed, err = %d\n", -errno);
+ return 0;
+ }
+
+ printk("OK\n");
+ return 1;
+}
+
void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int))
{
int flags = 0, pages;
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 3275313..387e26a 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -470,25 +470,6 @@
}
#endif
-int have_devanon = 0;
-
-/* Runs on boot kernel stack - already safe to use printk. */
-
-void check_devanon(void)
-{
- int fd;
-
- printk("Checking for /dev/anon on the host...");
- fd = open("/dev/anon", O_RDWR);
- if(fd < 0){
- printk("Not available (open failed with errno %d)\n", errno);
- return;
- }
-
- printk("OK\n");
- have_devanon = 1;
-}
-
int __init parse_iomem(char *str, int *add)
{
struct iomem_region *new;
@@ -664,6 +645,5 @@
{
check_ptrace();
check_sigio();
- check_devanon();
}
diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/um/os-Linux/sys-i386/Makefile
index 340ef26..b321361 100644
--- a/arch/um/os-Linux/sys-i386/Makefile
+++ b/arch/um/os-Linux/sys-i386/Makefile
@@ -3,7 +3,7 @@
# Licensed under the GPL
#
-obj-$(CONFIG_MODE_SKAS) = registers.o
+obj-$(CONFIG_MODE_SKAS) = registers.o tls.o
USER_OBJS := $(obj-y)
diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c
new file mode 100644
index 0000000..ba21f0e
--- /dev/null
+++ b/arch/um/os-Linux/sys-i386/tls.c
@@ -0,0 +1,33 @@
+#include <linux/unistd.h>
+#include "sysdep/tls.h"
+#include "user_util.h"
+
+static _syscall1(int, get_thread_area, user_desc_t *, u_info);
+
+/* Checks whether host supports TLS, and sets *tls_min according to the value
+ * valid on the host.
+ * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
+void check_host_supports_tls(int *supports_tls, int *tls_min) {
+ /* Values for x86 and x86_64.*/
+ int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(val); i++) {
+ user_desc_t info;
+ info.entry_number = val[i];
+
+ if (get_thread_area(&info) == 0) {
+ *tls_min = val[i];
+ *supports_tls = 1;
+ return;
+ } else {
+ if (errno == EINVAL)
+ continue;
+ else if (errno == ENOSYS)
+ *supports_tls = 0;
+ return;
+ }
+ }
+
+ *supports_tls = 0;
+}
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
new file mode 100644
index 0000000..9cb09a4
--- /dev/null
+++ b/arch/um/os-Linux/tls.c
@@ -0,0 +1,76 @@
+#include <errno.h>
+#include <sys/ptrace.h>
+#include <asm/ldt.h>
+#include "sysdep/tls.h"
+#include "uml-config.h"
+
+/* TLS support - we basically rely on the host's one.*/
+
+/* In TT mode, this should be called only by the tracing thread, and makes sense
+ * only for PTRACE_SET_THREAD_AREA. In SKAS mode, it's used normally.
+ *
+ */
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
+
+#ifndef PTRACE_SET_THREAD_AREA
+#define PTRACE_SET_THREAD_AREA 26
+#endif
+
+int os_set_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+#ifdef UML_CONFIG_MODE_SKAS
+
+int os_get_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+#endif
+
+#ifdef UML_CONFIG_MODE_TT
+#include "linux/unistd.h"
+
+static _syscall1(int, get_thread_area, user_desc_t *, u_info);
+static _syscall1(int, set_thread_area, user_desc_t *, u_info);
+
+int do_set_thread_area_tt(user_desc_t *info)
+{
+ int ret;
+
+ ret = set_thread_area(info);
+ if (ret < 0) {
+ ret = -errno;
+ }
+ return ret;
+}
+
+int do_get_thread_area_tt(user_desc_t *info)
+{
+ int ret;
+
+ ret = get_thread_area(info);
+ if (ret < 0) {
+ ret = -errno;
+ }
+ return ret;
+}
+
+#endif /* UML_CONFIG_MODE_TT */
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 2e41cab..b696b45 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -20,25 +20,7 @@
$(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
endef
-
-# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If
-# so, it's considered to be a path relative to $(srcdir) rather than
-# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from
-# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So,
-# it sets $(ldt.c-dir) to /arch/um/sys-i386.
-quiet_cmd_make_link = SYMLINK $@
-cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@
-
-# this needs to be before the foreach, because targets does not accept
-# complete paths like $(obj)/$(f). To make sure this works, use a := assignment
-# or we will get $(obj)/$(f) in the "targets" value.
-# Also, this forces you to use the := syntax when assigning to targets.
-# Otherwise the line below will cause an infinite loop (if you don't know why,
-# just do it).
-
-targets := $(targets) $(SYMLINKS)
-
-SYMLINKS := $(foreach f,$(SYMLINKS),$(obj)/$(f))
-
-$(SYMLINKS): FORCE
- $(call if_changed,make_link)
+ifdef subarch-obj-y
+obj-y += subarch.o
+subarch-y = $(addprefix ../../$(SUBARCH)/,$(subarch-obj-y))
+endif
diff --git a/arch/um/scripts/Makefile.unmap b/arch/um/scripts/Makefile.unmap
deleted file mode 100644
index b216518..0000000
--- a/arch/um/scripts/Makefile.unmap
+++ /dev/null
@@ -1,22 +0,0 @@
-clean-files += unmap_tmp.o unmap_fin.o unmap.o
-
-ifdef CONFIG_MODE_TT
-
-#Always build unmap_fin.o
-extra-y += unmap_fin.o
-#Do dependency tracking for unmap.o (it will be always built, but won't get the tracking unless we use this).
-targets += unmap.o
-
-#XXX: partially copied from arch/um/scripts/Makefile.rules
-$(obj)/unmap.o: _c_flags = $(call unprofile,$(CFLAGS))
-
-quiet_cmd_wrapld = LD $@
-define cmd_wrapld
- $(LD) $(LDFLAGS) -r -o $(obj)/unmap_tmp.o $< ; \
- $(OBJCOPY) $(UML_OBJCOPYFLAGS) $(obj)/unmap_tmp.o $@ -G switcheroo
-endef
-
-$(obj)/unmap_fin.o : $(obj)/unmap.o FORCE
- $(call if_changed,wrapld)
-
-endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index f5fd5b0..98b20b7 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -1,23 +1,18 @@
-obj-y := bitops.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o semaphore.o signal.o sigcontext.o syscalls.o sysrq.o \
- sys_call_table.o
+obj-y = bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
+ ptrace_user.o signal.o sigcontext.o syscalls.o sysrq.o \
+ sys_call_table.o tls.o
obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
-obj-$(CONFIG_MODULES) += module.o
+subarch-obj-y = lib/bitops.o kernel/semaphore.o
+subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
-SYMLINKS = bitops.c semaphore.c highmem.c module.c
-
include arch/um/scripts/Makefile.rules
-bitops.c-dir = lib
-semaphore.c-dir = kernel
-highmem.c-dir = mm
-module.c-dir = kernel
+extra-$(CONFIG_MODE_TT) += unmap.o
-$(obj)/stub_segv.o : _c_flags = $(call unprofile,$(CFLAGS))
-
-include arch/um/scripts/Makefile.unmap
+$(obj)/stub_segv.o $(obj)/unmap.o: \
+ _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 8032a10..6028bc7 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -15,9 +15,22 @@
#include "sysdep/sigcontext.h"
#include "sysdep/sc.h"
-void arch_switch(void)
+void arch_switch_to_tt(struct task_struct *from, struct task_struct *to)
{
- update_debugregs(current->thread.arch.debugregs_seq);
+ update_debugregs(to->thread.arch.debugregs_seq);
+ arch_switch_tls_tt(from, to);
+}
+
+void arch_switch_to_skas(struct task_struct *from, struct task_struct *to)
+{
+ int err = arch_switch_tls_skas(from, to);
+ if (!err)
+ return;
+
+ if (err != -EINVAL)
+ printk(KERN_WARNING "arch_switch_tls_skas failed, errno %d, not EINVAL\n", -err);
+ else
+ printk(KERN_WARNING "arch_switch_tls_skas failed, errno = EINVAL\n");
}
int is_syscall(unsigned long addr)
@@ -124,22 +137,22 @@
int peek_user(struct task_struct *child, long addr, long data)
{
/* read the word at location addr in the USER area. */
- unsigned long tmp;
+ unsigned long tmp;
- if ((addr & 3) || addr < 0)
- return -EIO;
+ if ((addr & 3) || addr < 0)
+ return -EIO;
- tmp = 0; /* Default return condition */
- if(addr < MAX_REG_OFFSET){
- tmp = getreg(child, addr);
- }
- else if((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))){
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- tmp = child->thread.arch.debugregs[addr];
- }
- return put_user(tmp, (unsigned long *) data);
+ tmp = 0; /* Default return condition */
+ if(addr < MAX_REG_OFFSET){
+ tmp = getreg(child, addr);
+ }
+ else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))){
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ tmp = child->thread.arch.debugregs[addr];
+ }
+ return put_user(tmp, (unsigned long __user *) data);
}
struct i387_fxsave_struct {
diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/um/sys-i386/ptrace_user.c
index 7c376c9..9f3bd8e 100644
--- a/arch/um/sys-i386/ptrace_user.c
+++ b/arch/um/sys-i386/ptrace_user.c
@@ -14,6 +14,7 @@
#include "sysdep/thread.h"
#include "user.h"
#include "os.h"
+#include "uml-config.h"
int ptrace_getregs(long pid, unsigned long *regs_out)
{
@@ -43,6 +44,7 @@
return 0;
}
+/* All the below stuff is of interest for TT mode only */
static void write_debugregs(int pid, unsigned long *regs)
{
struct user *dummy;
@@ -75,7 +77,6 @@
/* Accessed only by the tracing thread */
static unsigned long kernel_debugregs[8] = { [ 0 ... 7 ] = 0 };
-static int debugregs_seq = 0;
void arch_enter_kernel(void *task, int pid)
{
@@ -89,6 +90,11 @@
write_debugregs(pid, TASK_DEBUGREGS(task));
}
+#ifdef UML_CONFIG_PT_PROXY
+/* Accessed only by the tracing thread */
+static int debugregs_seq;
+
+/* Only called by the ptrace proxy */
void ptrace_pokeuser(unsigned long addr, unsigned long data)
{
if((addr < offsetof(struct user, u_debugreg[0])) ||
@@ -109,6 +115,7 @@
write_debugregs(pid, kernel_debugregs);
}
+/* Optimized out in its header when not defined */
void update_debugregs(int seq)
{
int me;
@@ -118,6 +125,7 @@
me = os_getpid();
initial_thread_cb(update_debugregs_cb, &me);
}
+#endif
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
index 33a40f5..f5d0e1c 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/um/sys-i386/signal.c
@@ -19,7 +19,7 @@
#include "skas.h"
static int copy_sc_from_user_skas(struct pt_regs *regs,
- struct sigcontext *from)
+ struct sigcontext __user *from)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
@@ -57,7 +57,7 @@
return(0);
}
-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
+int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate __user *to_fp,
struct pt_regs *regs, unsigned long sp)
{
struct sigcontext sc;
@@ -92,7 +92,7 @@
"errno = %d\n", err);
return(1);
}
- to_fp = (to_fp ? to_fp : (struct _fpstate *) (to + 1));
+ to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
sc.fpstate = to_fp;
if(err)
@@ -113,10 +113,11 @@
* saved pointer is in the kernel, but the sigcontext is in userspace, so we
* copy_to_user it.
*/
-int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
+int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
int fpsize)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate *to_fp;
+ struct _fpstate __user *from_fp;
unsigned long sigs;
int err;
@@ -131,13 +132,14 @@
return(err);
}
-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
+int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate __user *fp,
struct sigcontext *from, int fpsize, unsigned long sp)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate __user *to_fp;
+ struct _fpstate *from_fp;
int err;
- to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
+ to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
from_fp = from->fpstate;
err = copy_to_user(to, from, sizeof(*to));
@@ -165,7 +167,7 @@
return(ret);
}
-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
+static int copy_sc_to_user(struct sigcontext *to, struct _fpstate __user *fp,
struct pt_regs *from, unsigned long sp)
{
return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
@@ -173,7 +175,7 @@
copy_sc_to_user_skas(to, fp, from, sp)));
}
-static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp,
+static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
sigset_t *set, unsigned long sp)
{
int err = 0;
@@ -188,7 +190,7 @@
struct sigframe
{
- char *pretcode;
+ char __user *pretcode;
int sig;
struct sigcontext sc;
struct _fpstate fpstate;
@@ -198,10 +200,10 @@
struct rt_sigframe
{
- char *pretcode;
+ char __user *pretcode;
int sig;
- struct siginfo *pinfo;
- void *puc;
+ struct siginfo __user *pinfo;
+ void __user *puc;
struct siginfo info;
struct ucontext uc;
struct _fpstate fpstate;
@@ -213,16 +215,16 @@
sigset_t *mask)
{
struct sigframe __user *frame;
- void *restorer;
+ void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
- frame = (struct sigframe *) stack_top - 1;
+ frame = (struct sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
- restorer = (void *) frame->retcode;
+ restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
@@ -278,16 +280,16 @@
siginfo_t *info, sigset_t *mask)
{
struct rt_sigframe __user *frame;
- void *restorer;
+ void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
- frame = (struct rt_sigframe *) stack_top - 1;
+ frame = (struct rt_sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
- restorer = (void *) frame->retcode;
+ restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
@@ -333,7 +335,7 @@
long sys_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct sigframe __user *frame = (struct sigframe *)(sp - 8);
+ struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
sigset_t set;
struct sigcontext __user *sc = &frame->sc;
unsigned long __user *oldmask = &sc->oldmask;
@@ -365,8 +367,8 @@
long sys_rt_sigreturn(struct pt_regs regs)
{
- unsigned long __user sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame = (struct rt_sigframe *) (sp - 4);
+ unsigned long sp = PT_REGS_SP(¤t->thread.regs);
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (sp - 4);
sigset_t set;
struct ucontext __user *uc = &frame->uc;
int sig_size = _NSIG_WORDS * sizeof(unsigned long);
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index ad75c27..1ff6147 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -6,8 +6,6 @@
#define sys_vm86old sys_ni_syscall
#define sys_vm86 sys_ni_syscall
-#define sys_set_thread_area sys_ni_syscall
-#define sys_get_thread_area sys_ni_syscall
#define sys_stime um_stime
#define sys_time um_time
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 83e9be8..749dd1b 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -61,21 +61,27 @@
return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
}
-/* The i386 version skips reading from %esi, the fourth argument. So we must do
- * this, too.
+/*
+ * The prototype on i386 is:
+ *
+ * int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
+ *
+ * and the "newtls" arg. on i386 is read by copy_thread directly from the
+ * register saved on the stack.
*/
long sys_clone(unsigned long clone_flags, unsigned long newsp,
- int __user *parent_tid, int unused, int __user *child_tid)
+ int __user *parent_tid, void *newtls, int __user *child_tid)
{
long ret;
if (!newsp)
newsp = UPT_SP(¤t->thread.regs.regs);
+
current->thread.forking = 1;
ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid,
child_tid);
current->thread.forking = 0;
- return(ret);
+ return ret;
}
/*
@@ -104,7 +110,7 @@
union semun fourth;
if (!ptr)
return -EINVAL;
- if (get_user(fourth.__pad, (void **) ptr))
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
diff --git a/arch/um/sys-i386/tls.c b/arch/um/sys-i386/tls.c
new file mode 100644
index 0000000..a3188e8
--- /dev/null
+++ b/arch/um/sys-i386/tls.c
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2005 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
+ * Licensed under the GPL
+ */
+
+#include "linux/config.h"
+#include "linux/kernel.h"
+#include "linux/sched.h"
+#include "linux/slab.h"
+#include "linux/types.h"
+#include "asm/uaccess.h"
+#include "asm/ptrace.h"
+#include "asm/segment.h"
+#include "asm/smp.h"
+#include "asm/desc.h"
+#include "choose-mode.h"
+#include "kern.h"
+#include "kern_util.h"
+#include "mode_kern.h"
+#include "os.h"
+#include "mode.h"
+
+#ifdef CONFIG_MODE_SKAS
+#include "skas.h"
+#endif
+
+/* If needed we can detect when it's uninitialized. */
+static int host_supports_tls = -1;
+int host_gdt_entry_tls_min = -1;
+
+#ifdef CONFIG_MODE_SKAS
+int do_set_thread_area_skas(struct user_desc *info)
+{
+ int ret;
+ u32 cpu;
+
+ cpu = get_cpu();
+ ret = os_set_thread_area(info, userspace_pid[cpu]);
+ put_cpu();
+ return ret;
+}
+
+int do_get_thread_area_skas(struct user_desc *info)
+{
+ int ret;
+ u32 cpu;
+
+ cpu = get_cpu();
+ ret = os_get_thread_area(info, userspace_pid[cpu]);
+ put_cpu();
+ return ret;
+}
+#endif
+
+/*
+ * sys_get_thread_area: get a yet unused TLS descriptor index.
+ * XXX: Consider leaving one free slot for glibc usage at first place. This must
+ * be done here (and by changing GDT_ENTRY_TLS_* macros) and nowhere else.
+ *
+ * Also, this must be tested when compiling in SKAS mode with dinamic linking
+ * and running against NPTL.
+ */
+static int get_free_idx(struct task_struct* task)
+{
+ struct thread_struct *t = &task->thread;
+ int idx;
+
+ if (!t->arch.tls_array)
+ return GDT_ENTRY_TLS_MIN;
+
+ for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
+ if (!t->arch.tls_array[idx].present)
+ return idx + GDT_ENTRY_TLS_MIN;
+ return -ESRCH;
+}
+
+static inline void clear_user_desc(struct user_desc* info)
+{
+ /* Postcondition: LDT_empty(info) returns true. */
+ memset(info, 0, sizeof(*info));
+
+ /* Check the LDT_empty or the i386 sys_get_thread_area code - we obtain
+ * indeed an empty user_desc.
+ */
+ info->read_exec_only = 1;
+ info->seg_not_present = 1;
+}
+
+#define O_FORCE 1
+
+static int load_TLS(int flags, struct task_struct *to)
+{
+ int ret = 0;
+ int idx;
+
+ for (idx = GDT_ENTRY_TLS_MIN; idx < GDT_ENTRY_TLS_MAX; idx++) {
+ struct uml_tls_struct* curr = &to->thread.arch.tls_array[idx - GDT_ENTRY_TLS_MIN];
+
+ /* Actually, now if it wasn't flushed it gets cleared and
+ * flushed to the host, which will clear it.*/
+ if (!curr->present) {
+ if (!curr->flushed) {
+ clear_user_desc(&curr->tls);
+ curr->tls.entry_number = idx;
+ } else {
+ WARN_ON(!LDT_empty(&curr->tls));
+ continue;
+ }
+ }
+
+ if (!(flags & O_FORCE) && curr->flushed)
+ continue;
+
+ ret = do_set_thread_area(&curr->tls);
+ if (ret)
+ goto out;
+
+ curr->flushed = 1;
+ }
+out:
+ return ret;
+}
+
+/* Verify if we need to do a flush for the new process, i.e. if there are any
+ * present desc's, only if they haven't been flushed.
+ */
+static inline int needs_TLS_update(struct task_struct *task)
+{
+ int i;
+ int ret = 0;
+
+ for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
+ struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+
+ /* Can't test curr->present, we may need to clear a descriptor
+ * which had a value. */
+ if (curr->flushed)
+ continue;
+ ret = 1;
+ break;
+ }
+ return ret;
+}
+
+/* On a newly forked process, the TLS descriptors haven't yet been flushed. So
+ * we mark them as such and the first switch_to will do the job.
+ */
+void clear_flushed_tls(struct task_struct *task)
+{
+ int i;
+
+ for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
+ struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+
+ /* Still correct to do this, if it wasn't present on the host it
+ * will remain as flushed as it was. */
+ if (!curr->present)
+ continue;
+
+ curr->flushed = 0;
+ }
+}
+
+/* In SKAS0 mode, currently, multiple guest threads sharing the same ->mm have a
+ * common host process. So this is needed in SKAS0 too.
+ *
+ * However, if each thread had a different host process (and this was discussed
+ * for SMP support) this won't be needed.
+ *
+ * And this will not need be used when (and if) we'll add support to the host
+ * SKAS patch. */
+
+int arch_switch_tls_skas(struct task_struct *from, struct task_struct *to)
+{
+ if (!host_supports_tls)
+ return 0;
+
+ /* We have no need whatsoever to switch TLS for kernel threads; beyond
+ * that, that would also result in us calling os_set_thread_area with
+ * userspace_pid[cpu] == 0, which gives an error. */
+ if (likely(to->mm))
+ return load_TLS(O_FORCE, to);
+
+ return 0;
+}
+
+int arch_switch_tls_tt(struct task_struct *from, struct task_struct *to)
+{
+ if (!host_supports_tls)
+ return 0;
+
+ if (needs_TLS_update(to))
+ return load_TLS(0, to);
+
+ return 0;
+}
+
+static int set_tls_entry(struct task_struct* task, struct user_desc *info,
+ int idx, int flushed)
+{
+ struct thread_struct *t = &task->thread;
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].tls = *info;
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].present = 1;
+ t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed = flushed;
+
+ return 0;
+}
+
+int arch_copy_tls(struct task_struct *new)
+{
+ struct user_desc info;
+ int idx, ret = -EFAULT;
+
+ if (copy_from_user(&info,
+ (void __user *) UPT_ESI(&new->thread.regs.regs),
+ sizeof(info)))
+ goto out;
+
+ ret = -EINVAL;
+ if (LDT_empty(&info))
+ goto out;
+
+ idx = info.entry_number;
+
+ ret = set_tls_entry(new, &info, idx, 0);
+out:
+ return ret;
+}
+
+/* XXX: use do_get_thread_area to read the host value? I'm not at all sure! */
+static int get_tls_entry(struct task_struct* task, struct user_desc *info, int idx)
+{
+ struct thread_struct *t = &task->thread;
+
+ if (!t->arch.tls_array)
+ goto clear;
+
+ if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+ return -EINVAL;
+
+ if (!t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].present)
+ goto clear;
+
+ *info = t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].tls;
+
+out:
+ /* Temporary debugging check, to make sure that things have been
+ * flushed. This could be triggered if load_TLS() failed.
+ */
+ if (unlikely(task == current && !t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed)) {
+ printk(KERN_ERR "get_tls_entry: task with pid %d got here "
+ "without flushed TLS.", current->pid);
+ }
+
+ return 0;
+clear:
+ /* When the TLS entry has not been set, the values read to user in the
+ * tls_array are 0 (because it's cleared at boot, see
+ * arch/i386/kernel/head.S:cpu_gdt_table). Emulate that.
+ */
+ clear_user_desc(info);
+ info->entry_number = idx;
+ goto out;
+}
+
+asmlinkage int sys_set_thread_area(struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int idx, ret;
+
+ if (!host_supports_tls)
+ return -ENOSYS;
+
+ if (copy_from_user(&info, user_desc, sizeof(info)))
+ return -EFAULT;
+
+ idx = info.entry_number;
+
+ if (idx == -1) {
+ idx = get_free_idx(current);
+ if (idx < 0)
+ return idx;
+ info.entry_number = idx;
+ /* Tell the user which slot we chose for him.*/
+ if (put_user(idx, &user_desc->entry_number))
+ return -EFAULT;
+ }
+
+ ret = CHOOSE_MODE_PROC(do_set_thread_area_tt, do_set_thread_area_skas, &info);
+ if (ret)
+ return ret;
+ return set_tls_entry(current, &info, idx, 1);
+}
+
+/*
+ * Perform set_thread_area on behalf of the traced child.
+ * Note: error handling is not done on the deferred load, and this differ from
+ * i386. However the only possible error are caused by bugs.
+ */
+int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+
+ if (!host_supports_tls)
+ return -EIO;
+
+ if (copy_from_user(&info, user_desc, sizeof(info)))
+ return -EFAULT;
+
+ return set_tls_entry(child, &info, idx, 0);
+}
+
+asmlinkage int sys_get_thread_area(struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int idx, ret;
+
+ if (!host_supports_tls)
+ return -ENOSYS;
+
+ if (get_user(idx, &user_desc->entry_number))
+ return -EFAULT;
+
+ ret = get_tls_entry(current, &info, idx);
+ if (ret < 0)
+ goto out;
+
+ if (copy_to_user(user_desc, &info, sizeof(info)))
+ ret = -EFAULT;
+
+out:
+ return ret;
+}
+
+/*
+ * Perform get_thread_area on behalf of the traced child.
+ */
+int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ struct user_desc info;
+ int ret;
+
+ if (!host_supports_tls)
+ return -EIO;
+
+ ret = get_tls_entry(child, &info, idx);
+ if (ret < 0)
+ goto out;
+
+ if (copy_to_user(user_desc, &info, sizeof(info)))
+ ret = -EFAULT;
+out:
+ return ret;
+}
+
+
+/* XXX: This part is probably common to i386 and x86-64. Don't create a common
+ * file for now, do that when implementing x86-64 support.*/
+static int __init __setup_host_supports_tls(void) {
+ check_host_supports_tls(&host_supports_tls, &host_gdt_entry_tls_min);
+ if (host_supports_tls) {
+ printk(KERN_INFO "Host TLS support detected\n");
+ printk(KERN_INFO "Detected host type: ");
+ switch (host_gdt_entry_tls_min) {
+ case GDT_ENTRY_TLS_MIN_I386:
+ printk("i386\n");
+ break;
+ case GDT_ENTRY_TLS_MIN_X86_64:
+ printk("x86_64\n");
+ break;
+ }
+ } else
+ printk(KERN_ERR " Host TLS support NOT detected! "
+ "TLS support inside UML will not work\n");
+ return 1;
+}
+
+__initcall(__setup_host_supports_tls);
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index a351091..b5fc22b 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -4,31 +4,23 @@
# Licensed under the GPL
#
-#XXX: why into lib-y?
-lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \
- ptrace.o ptrace_user.o sigcontext.o signal.o syscalls.o \
- syscall_table.o sysrq.o thunk.o
-lib-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
+obj-y = bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
+ sigcontext.o signal.o syscalls.o syscall_table.o sysrq.o ksyms.o \
+ tls.o
-obj-y := ksyms.o
-obj-$(CONFIG_MODULES) += module.o um_module.o
+obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
+obj-$(CONFIG_MODULES) += um_module.o
+
+subarch-obj-y = lib/bitops.o lib/csum-partial.o lib/memcpy.o lib/thunk.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
+
+ldt-y = ../sys-i386/ldt.o
USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
-SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \
- thunk.S module.c
-
include arch/um/scripts/Makefile.rules
-bitops.c-dir = lib
-csum-copy.S-dir = lib
-csum-partial.c-dir = lib
-csum-wrappers.c-dir = lib
-ldt.c-dir = /arch/um/sys-i386
-memcpy.S-dir = lib
-thunk.S-dir = lib
-module.c-dir = kernel
+extra-$(CONFIG_MODE_TT) += unmap.o
-$(obj)/stub_segv.o: _c_flags = $(call unprofile,$(CFLAGS))
-
-include arch/um/scripts/Makefile.unmap
+$(obj)/stub_segv.o $(obj)/unmap.o: \
+ _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-x86_64/tls.c b/arch/um/sys-x86_64/tls.c
new file mode 100644
index 0000000..ce1bf1b
--- /dev/null
+++ b/arch/um/sys-x86_64/tls.c
@@ -0,0 +1,14 @@
+#include "linux/sched.h"
+
+void debug_arch_force_load_TLS(void)
+{
+}
+
+void clear_flushed_tls(struct task_struct *task)
+{
+}
+
+int arch_copy_tls(struct task_struct *t)
+{
+ return 0;
+}
diff --git a/arch/x86_64/ia32/vsyscall-sigreturn.S b/arch/x86_64/ia32/vsyscall-sigreturn.S
index d90321f..1384367 100644
--- a/arch/x86_64/ia32/vsyscall-sigreturn.S
+++ b/arch/x86_64/ia32/vsyscall-sigreturn.S
@@ -32,9 +32,28 @@
.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
.section .eh_frame,"a",@progbits
+.LSTARTFRAMES:
+ .long .LENDCIES-.LSTARTCIES
+.LSTARTCIES:
+ .long 0 /* CIE ID */
+ .byte 1 /* Version number */
+ .string "zRS" /* NUL-terminated augmentation string */
+ .uleb128 1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 8 /* Return address register column */
+ .uleb128 1 /* Augmentation value length */
+ .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+ .byte 0x0c /* DW_CFA_def_cfa */
+ .uleb128 4
+ .uleb128 4
+ .byte 0x88 /* DW_CFA_offset, column 0x8 */
+ .uleb128 1
+ .align 4
+.LENDCIES:
+
.long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
.LSTARTFDE2:
- .long .LSTARTFDE2-.LSTARTFRAME /* CIE pointer */
+ .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */
/* HACK: The dwarf2 unwind routines will subtract 1 from the
return address to get an address in the middle of the
presumed call instruction. Since we didn't get here via
@@ -97,7 +116,7 @@
.long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
.LSTARTFDE3:
- .long .LSTARTFDE3-.LSTARTFRAME /* CIE pointer */
+ .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */
/* HACK: See above wrt unwind library assumptions. */
.long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
.long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index d546201..100a30c 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -615,7 +615,7 @@
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug", str);
- return 0;
+ return 1;
}
__setup("apic=", apic_set_verbosity);
@@ -1137,35 +1137,35 @@
static __init int setup_disableapic(char *str)
{
disable_apic = 1;
- return 0;
+ return 1;
}
static __init int setup_nolapic(char *str)
{
disable_apic = 1;
- return 0;
+ return 1;
}
static __init int setup_noapictimer(char *str)
{
if (str[0] != ' ' && str[0] != 0)
- return -1;
+ return 0;
disable_apic_timer = 1;
- return 0;
+ return 1;
}
static __init int setup_apicmaintimer(char *str)
{
apic_runs_main_timer = 1;
nohpet = 1;
- return 0;
+ return 1;
}
__setup("apicmaintimer", setup_apicmaintimer);
static __init int setup_noapicmaintimer(char *str)
{
apic_runs_main_timer = -1;
- return 0;
+ return 1;
}
__setup("noapicmaintimer", setup_noapicmaintimer);
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
index 13af920..b93ef5b 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86_64/kernel/early_printk.c
@@ -221,7 +221,7 @@
char buf[256];
if (early_console_initialized)
- return -1;
+ return 1;
strlcpy(buf,opt,sizeof(buf));
space = strchr(buf, ' ');
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 04282ef..10b3e34 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -501,7 +501,7 @@
static int __init mcheck_disable(char *str)
{
mce_dont_init = 1;
- return 0;
+ return 1;
}
/* mce=off disables machine check. Note you can reenable it later
@@ -521,7 +521,7 @@
get_option(&str, &tolerant);
else
printk("mce= argument %s ignored. Please use /sys", str);
- return 0;
+ return 1;
}
__setup("nomce", mcheck_disable);
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
index ee5ee48..b0444a4 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -121,7 +121,7 @@
static int __init nopmtimer_setup(char *s)
{
pmtmr_ioport = 0;
- return 0;
+ return 1;
}
__setup("nopmtimer", nopmtimer_setup);
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index d1f3e92..0856ad4 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -540,7 +540,7 @@
static int __init noreplacement_setup(char *s)
{
no_replacement = 1;
- return 0;
+ return 1;
}
__setup("noreplacement", noreplacement_setup);
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index eabdb63f..8a691fa 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -55,7 +55,7 @@
do_not_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
}
- return 0;
+ return 1;
}
__setup("noexec=", nonx_setup); /* parsed early actually */
@@ -74,7 +74,7 @@
force_personality32 &= ~READ_IMPLIES_EXEC;
else if (!strcmp(str, "off"))
force_personality32 |= READ_IMPLIES_EXEC;
- return 0;
+ return 1;
}
__setup("noexec32=", nonx32_setup);
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index ea48fa6..71a7222 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -353,7 +353,7 @@
static __init int notscsync_setup(char *s)
{
notscsync = 1;
- return 0;
+ return 1;
}
__setup("notscsync", notscsync_setup);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 473b514..ef8bc46 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -1306,7 +1306,7 @@
static int __init nohpet_setup(char *s)
{
nohpet = 1;
- return 0;
+ return 1;
}
__setup("nohpet", nohpet_setup);
@@ -1314,7 +1314,7 @@
int __init notsc_setup(char *s)
{
notsc = 1;
- return 0;
+ return 1;
}
__setup("notsc", notsc_setup);
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index edaa9fe..6bda322 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -973,14 +973,14 @@
static int __init oops_dummy(char *s)
{
panic_on_oops = 1;
- return -1;
+ return 1;
}
__setup("oops=", oops_dummy);
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s,NULL,0);
- return 0;
+ return 1;
}
__setup("kstack=", kstack_setup);
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index d96a934..d78f460 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -102,8 +102,6 @@
EXPORT_SYMBOL(screen_info);
#endif
-EXPORT_SYMBOL(get_wchan);
-
EXPORT_SYMBOL(rtc_lock);
EXPORT_SYMBOL_GPL(set_nmi_callback);
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 316c53d..5525059 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -623,6 +623,6 @@
static int __init enable_pagefaulttrace(char *str)
{
page_fault_trace = 1;
- return 0;
+ return 1;
}
__setup("pagefaulttrace", enable_pagefaulttrace);
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index efae56a..152b937 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -113,8 +113,6 @@
// FIXME EXPORT_SYMBOL(screen_info);
#endif
-EXPORT_SYMBOL(get_wchan);
-
EXPORT_SYMBOL(outsb);
EXPORT_SYMBOL(outsw);
EXPORT_SYMBOL(outsl);
diff --git a/block/Kconfig b/block/Kconfig
index 5536839..b6f5f0a 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -27,10 +27,10 @@
config LSF
bool "Support for Large Single Files"
depends on X86 || (MIPS && 32BIT) || PPC32 || ARCH_S390_31 || SUPERH || UML
- default n
help
- When CONFIG_LBD is disabled, say Y here if you want to
- handle large file(bigger than 2TB), otherwise say N.
- When CONFIG_LBD is enabled, Y is set automatically.
+ Say Y here if you want to be able to handle very large files (bigger
+ than 2TB), otherwise say N.
+
+ If unsure, say Y.
source block/Kconfig.iosched
diff --git a/block/elevator.c b/block/elevator.c
index 56c2ed0..0d6be03 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -145,7 +145,7 @@
strcpy(chosen_elevator, "anticipatory");
else
strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
- return 0;
+ return 1;
}
__setup("elevator=", elevator_setup);
diff --git a/block/genhd.c b/block/genhd.c
index db4c60c..5a8d3bf 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -17,8 +17,6 @@
#include <linux/buffer_head.h>
#include <linux/mutex.h>
-#define MAX_PROBE_HASH 255 /* random */
-
static struct subsystem block_subsys;
static DEFINE_MUTEX(block_subsys_lock);
@@ -31,108 +29,29 @@
struct blk_major_name *next;
int major;
char name[16];
-} *major_names[MAX_PROBE_HASH];
+} *major_names[BLKDEV_MAJOR_HASH_SIZE];
/* index in the above - for now: assume no multimajor ranges */
static inline int major_to_index(int major)
{
- return major % MAX_PROBE_HASH;
+ return major % BLKDEV_MAJOR_HASH_SIZE;
}
-struct blkdev_info {
- int index;
- struct blk_major_name *bd;
-};
+#ifdef CONFIG_PROC_FS
-/*
- * iterate over a list of blkdev_info structures. allows
- * the major_names array to be iterated over from outside this file
- * must be called with the block_subsys_lock held
- */
-void *get_next_blkdev(void *dev)
+void blkdev_show(struct seq_file *f, off_t offset)
{
- struct blkdev_info *info;
+ struct blk_major_name *dp;
- if (dev == NULL) {
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto out;
- info->index=0;
- info->bd = major_names[info->index];
- if (info->bd)
- goto out;
- } else {
- info = dev;
- }
-
- while (info->index < ARRAY_SIZE(major_names)) {
- if (info->bd)
- info->bd = info->bd->next;
- if (info->bd)
- goto out;
- /*
- * No devices on this chain, move to the next
- */
- info->index++;
- info->bd = (info->index < ARRAY_SIZE(major_names)) ?
- major_names[info->index] : NULL;
- if (info->bd)
- goto out;
- }
-
-out:
- return info;
-}
-
-void *acquire_blkdev_list(void)
-{
- mutex_lock(&block_subsys_lock);
- return get_next_blkdev(NULL);
-}
-
-void release_blkdev_list(void *dev)
-{
- mutex_unlock(&block_subsys_lock);
- kfree(dev);
-}
-
-
-/*
- * Count the number of records in the blkdev_list.
- * must be called with the block_subsys_lock held
- */
-int count_blkdev_list(void)
-{
- struct blk_major_name *n;
- int i, count;
-
- count = 0;
-
- for (i = 0; i < ARRAY_SIZE(major_names); i++) {
- for (n = major_names[i]; n; n = n->next)
- count++;
+ if (offset < BLKDEV_MAJOR_HASH_SIZE) {
+ mutex_lock(&block_subsys_lock);
+ for (dp = major_names[offset]; dp; dp = dp->next)
+ seq_printf(f, "%3d %s\n", dp->major, dp->name);
+ mutex_unlock(&block_subsys_lock);
}
-
- return count;
}
-/*
- * extract the major and name values from a blkdev_info struct
- * passed in as a void to *dev. Must be called with
- * block_subsys_lock held
- */
-int get_blkdev_info(void *dev, int *major, char **name)
-{
- struct blkdev_info *info = dev;
-
- if (info->bd == NULL)
- return 1;
-
- *major = info->bd->major;
- *name = info->bd->name;
- return 0;
-}
-
+#endif /* CONFIG_PROC_FS */
int register_blkdev(unsigned int major, const char *name)
{
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 9f5c0da..5c91d6a 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -64,6 +64,8 @@
source "drivers/mmc/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/infiniband/Kconfig"
source "drivers/sn/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 4249552..d6e8ffb 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_EISA) += eisa/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
+obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 79b09d7..eee0864 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1572,7 +1572,7 @@
static int __init acpi_fake_ecdt_setup(char *str)
{
acpi_fake_ecdt_enabled = 1;
- return 0;
+ return 1;
}
__setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
@@ -1591,7 +1591,7 @@
acpi_ec_driver.ops.add = acpi_ec_poll_add;
}
printk(KERN_INFO PREFIX "EC %s mode.\n", intr ? "interrupt" : "polling");
- return 0;
+ return 1;
}
__setup("ec_intr=", acpi_ec_set_intr_mode);
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index b6e2909..2a8af68 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1850,6 +1850,7 @@
return 0;
printk (KERN_INFO "amiflop: Setting default df0 to %x\n", n);
fd_def_df0 = n;
+ return 1;
}
__setup("floppy=", amiga_floppy_setup);
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 932feed..e1c9537 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -42,7 +42,7 @@
#include <linux/slab.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/ipmi.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/compat.h>
@@ -55,7 +55,7 @@
struct file *file;
struct fasync_struct *fasync_queue;
wait_queue_head_t wait;
- struct semaphore recv_sem;
+ struct mutex recv_mutex;
int default_retries;
unsigned int default_retry_time_ms;
};
@@ -141,7 +141,7 @@
INIT_LIST_HEAD(&(priv->recv_msgs));
init_waitqueue_head(&priv->wait);
priv->fasync_queue = NULL;
- sema_init(&(priv->recv_sem), 1);
+ mutex_init(&priv->recv_mutex);
/* Use the low-level defaults. */
priv->default_retries = -1;
@@ -285,15 +285,15 @@
break;
}
- /* We claim a semaphore because we don't want two
+ /* We claim a mutex because we don't want two
users getting something from the queue at a time.
Since we have to release the spinlock before we can
copy the data to the user, it's possible another
user will grab something from the queue, too. Then
the messages might get out of order if something
fails and the message gets put back onto the
- queue. This semaphore prevents that problem. */
- down(&(priv->recv_sem));
+ queue. This mutex prevents that problem. */
+ mutex_lock(&priv->recv_mutex);
/* Grab the message off the list. */
spin_lock_irqsave(&(priv->recv_msg_lock), flags);
@@ -352,7 +352,7 @@
goto recv_putback_on_err;
}
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
ipmi_free_recv_msg(msg);
break;
@@ -362,11 +362,11 @@
spin_lock_irqsave(&(priv->recv_msg_lock), flags);
list_add(entry, &(priv->recv_msgs));
spin_unlock_irqrestore(&(priv->recv_msg_lock), flags);
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
break;
recv_err:
- up(&(priv->recv_sem));
+ mutex_unlock(&priv->recv_mutex);
break;
}
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index da15541..2062675 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -227,7 +227,7 @@
static inline int check_obf(struct si_sm_data *kcs, unsigned char status,
long time)
{
- if (! GET_STATUS_OBF(status)) {
+ if (!GET_STATUS_OBF(status)) {
kcs->obf_timeout -= time;
if (kcs->obf_timeout < 0) {
start_error_recovery(kcs, "OBF not ready in time");
@@ -407,7 +407,7 @@
}
if (state == KCS_READ_STATE) {
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
read_next_byte(kcs);
} else {
@@ -447,7 +447,7 @@
"Not in read state for error2");
break;
}
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
clear_obf(kcs, status);
@@ -462,7 +462,7 @@
break;
}
- if (! check_obf(kcs, status, time))
+ if (!check_obf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
clear_obf(kcs, status);
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 40eb005..0ded046 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -38,6 +38,7 @@
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/ipmi.h>
#include <linux/ipmi_smi.h>
@@ -234,7 +235,7 @@
/* The list of command receivers that are registered for commands
on this interface. */
- struct semaphore cmd_rcvrs_lock;
+ struct mutex cmd_rcvrs_mutex;
struct list_head cmd_rcvrs;
/* Events that were queues because no one was there to receive
@@ -387,10 +388,10 @@
/* Wholesale remove all the entries from the list in the
* interface and wait for RCU to know that none are in use. */
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
list_add_rcu(&list, &intf->cmd_rcvrs);
list_del_rcu(&intf->cmd_rcvrs);
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
list_for_each_entry_safe(rcvr, rcvr2, &list, link)
@@ -557,7 +558,7 @@
static void deliver_response(struct ipmi_recv_msg *msg)
{
- if (! msg->user) {
+ if (!msg->user) {
ipmi_smi_t intf = msg->user_msg_data;
unsigned long flags;
@@ -598,11 +599,11 @@
(i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq;
i = (i+1)%IPMI_IPMB_NUM_SEQ)
{
- if (! intf->seq_table[i].inuse)
+ if (!intf->seq_table[i].inuse)
break;
}
- if (! intf->seq_table[i].inuse) {
+ if (!intf->seq_table[i].inuse) {
intf->seq_table[i].recv_msg = recv_msg;
/* Start with the maximum timeout, when the send response
@@ -763,7 +764,7 @@
}
new_user = kmalloc(sizeof(*new_user), GFP_KERNEL);
- if (! new_user)
+ if (!new_user)
return -ENOMEM;
spin_lock_irqsave(&interfaces_lock, flags);
@@ -819,14 +820,13 @@
int ipmi_destroy_user(ipmi_user_t user)
{
- int rv = -ENODEV;
ipmi_smi_t intf = user->intf;
int i;
unsigned long flags;
struct cmd_rcvr *rcvr;
struct cmd_rcvr *rcvrs = NULL;
- user->valid = 1;
+ user->valid = 0;
/* Remove the user from the interface's sequence table. */
spin_lock_irqsave(&intf->seq_lock, flags);
@@ -847,7 +847,7 @@
* since other things may be using it till we do
* synchronize_rcu()) then free everything in that list.
*/
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) {
if (rcvr->user == user) {
list_del_rcu(&rcvr->link);
@@ -855,7 +855,7 @@
rcvrs = rcvr;
}
}
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
while (rcvrs) {
rcvr = rcvrs;
@@ -871,7 +871,7 @@
kref_put(&user->refcount, free_user);
- return rv;
+ return 0;
}
void ipmi_get_version(ipmi_user_t user,
@@ -936,7 +936,8 @@
if (val) {
/* Deliver any queued events. */
- list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) {
+ list_for_each_entry_safe(msg, msg2, &intf->waiting_events,
+ link) {
list_del(&msg->link);
list_add_tail(&msg->link, &msgs);
}
@@ -978,13 +979,13 @@
rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL);
- if (! rcvr)
+ if (!rcvr)
return -ENOMEM;
rcvr->cmd = cmd;
rcvr->netfn = netfn;
rcvr->user = user;
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
/* Make sure the command/netfn is not already registered. */
entry = find_cmd_rcvr(intf, netfn, cmd);
if (entry) {
@@ -995,7 +996,7 @@
list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
out_unlock:
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
if (rv)
kfree(rcvr);
@@ -1009,17 +1010,17 @@
ipmi_smi_t intf = user->intf;
struct cmd_rcvr *rcvr;
- down(&intf->cmd_rcvrs_lock);
+ mutex_lock(&intf->cmd_rcvrs_mutex);
/* Make sure the command/netfn is not already registered. */
rcvr = find_cmd_rcvr(intf, netfn, cmd);
if ((rcvr) && (rcvr->user == user)) {
list_del_rcu(&rcvr->link);
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
synchronize_rcu();
kfree(rcvr);
return 0;
} else {
- up(&intf->cmd_rcvrs_lock);
+ mutex_unlock(&intf->cmd_rcvrs_mutex);
return -ENOENT;
}
}
@@ -1514,7 +1515,7 @@
unsigned char saddr, lun;
int rv;
- if (! user)
+ if (!user)
return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
@@ -1545,7 +1546,7 @@
unsigned char saddr, lun;
int rv;
- if (! user)
+ if (!user)
return -EINVAL;
rv = check_addr(user->intf, addr, &saddr, &lun);
if (rv)
@@ -1570,7 +1571,7 @@
char *out = (char *) page;
ipmi_smi_t intf = data;
int i;
- int rv= 0;
+ int rv = 0;
for (i = 0; i < IPMI_MAX_CHANNELS; i++)
rv += sprintf(out+rv, "%x ", intf->channels[i].address);
@@ -1989,7 +1990,7 @@
} else {
bmc->dev = platform_device_alloc("ipmi_bmc",
bmc->id.device_id);
- if (! bmc->dev) {
+ if (!bmc->dev) {
printk(KERN_ERR
"ipmi_msghandler:"
" Unable to allocate platform device\n");
@@ -2305,8 +2306,7 @@
void *send_info,
struct ipmi_device_id *device_id,
struct device *si_dev,
- unsigned char slave_addr,
- ipmi_smi_t *new_intf)
+ unsigned char slave_addr)
{
int i, j;
int rv;
@@ -2366,7 +2366,7 @@
spin_lock_init(&intf->events_lock);
INIT_LIST_HEAD(&intf->waiting_events);
intf->waiting_events_count = 0;
- init_MUTEX(&intf->cmd_rcvrs_lock);
+ mutex_init(&intf->cmd_rcvrs_mutex);
INIT_LIST_HEAD(&intf->cmd_rcvrs);
init_waitqueue_head(&intf->waitq);
@@ -2388,9 +2388,9 @@
if (rv)
goto out;
- /* FIXME - this is an ugly kludge, this sets the intf for the
- caller before sending any messages with it. */
- *new_intf = intf;
+ rv = handlers->start_processing(send_info, intf);
+ if (rv)
+ goto out;
get_guid(intf);
@@ -2622,7 +2622,7 @@
spin_unlock_irqrestore(&intf->counter_lock, flags);
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -2777,7 +2777,7 @@
spin_unlock_irqrestore(&intf->counter_lock, flags);
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -2869,13 +2869,14 @@
events. */
rcu_read_lock();
list_for_each_entry_rcu(user, &intf->users, link) {
- if (! user->gets_events)
+ if (!user->gets_events)
continue;
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
rcu_read_unlock();
- list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) {
+ list_for_each_entry_safe(recv_msg, recv_msg2, &msgs,
+ link) {
list_del(&recv_msg->link);
ipmi_free_recv_msg(recv_msg);
}
@@ -2905,7 +2906,7 @@
/* No one to receive the message, put it in queue if there's
not already too many things in the queue. */
recv_msg = ipmi_alloc_recv_msg();
- if (! recv_msg) {
+ if (!recv_msg) {
/* We couldn't allocate memory for the
message, so requeue it for handling
later. */
@@ -3190,7 +3191,7 @@
rcu_read_lock();
list_for_each_entry_rcu(user, &intf->users, link) {
- if (! user->handler->ipmi_watchdog_pretimeout)
+ if (!user->handler->ipmi_watchdog_pretimeout)
continue;
user->handler->ipmi_watchdog_pretimeout(user->handler_data);
@@ -3278,7 +3279,7 @@
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
- if (! smi_msg)
+ if (!smi_msg)
return;
spin_unlock_irqrestore(&intf->seq_lock, *flags);
@@ -3314,8 +3315,9 @@
/* See if any waiting messages need to be processed. */
spin_lock_irqsave(&intf->waiting_msgs_lock, flags);
- list_for_each_entry_safe(smi_msg, smi_msg2, &intf->waiting_msgs, link) {
- if (! handle_new_recv_msg(intf, smi_msg)) {
+ list_for_each_entry_safe(smi_msg, smi_msg2,
+ &intf->waiting_msgs, link) {
+ if (!handle_new_recv_msg(intf, smi_msg)) {
list_del(&smi_msg->link);
ipmi_free_smi_msg(smi_msg);
} else {
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index 786a280..d0b5c08 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -346,7 +346,7 @@
{
const char ipmi_version_major = ipmi_version & 0xF;
const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
- const char mfr[3]=DELL_IANA_MFR_ID;
+ const char mfr[3] = DELL_IANA_MFR_ID;
if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
ipmi_version_major <= 1 &&
ipmi_version_minor < 5)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 35fbd4d..a86c0f2 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -803,7 +803,7 @@
set_user_nice(current, 19);
while (!kthread_should_stop()) {
spin_lock_irqsave(&(smi_info->si_lock), flags);
- smi_result=smi_event_handler(smi_info, 0);
+ smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
/* do nothing */
@@ -972,10 +972,37 @@
return si_irq_handler(irq, data, regs);
}
+static int smi_start_processing(void *send_info,
+ ipmi_smi_t intf)
+{
+ struct smi_info *new_smi = send_info;
+
+ new_smi->intf = intf;
+
+ /* Set up the timer that drives the interface. */
+ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
+ new_smi->last_timeout_jiffies = jiffies;
+ mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (new_smi->si_type != SI_BT) {
+ new_smi->thread = kthread_run(ipmi_thread, new_smi,
+ "kipmi%d", new_smi->intf_num);
+ if (IS_ERR(new_smi->thread)) {
+ printk(KERN_NOTICE "ipmi_si_intf: Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
+ PTR_ERR(new_smi->thread));
+ new_smi->thread = NULL;
+ }
+ }
+
+ return 0;
+}
static struct ipmi_smi_handlers handlers =
{
.owner = THIS_MODULE,
+ .start_processing = smi_start_processing,
.sender = sender,
.request_events = request_events,
.set_run_to_completion = set_run_to_completion,
@@ -987,7 +1014,7 @@
#define SI_MAX_PARMS 4
static LIST_HEAD(smi_infos);
-static DECLARE_MUTEX(smi_infos_lock);
+static DEFINE_MUTEX(smi_infos_lock);
static int smi_num; /* Used to sequence the SMIs */
#define DEFAULT_REGSPACING 1
@@ -2162,9 +2189,13 @@
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
- if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
- kthread_stop(smi_info->thread);
- del_timer_sync(&smi_info->si_timer);
+ if (smi_info->intf) {
+ /* The timer and thread are only running if the
+ interface has been started up and registered. */
+ if (smi_info->thread != NULL)
+ kthread_stop(smi_info->thread);
+ del_timer_sync(&smi_info->si_timer);
+ }
}
static struct ipmi_default_vals
@@ -2245,7 +2276,7 @@
new_smi->slave_addr, new_smi->irq);
}
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
printk(KERN_WARNING "ipmi_si: duplicate interface\n");
rv = -EBUSY;
@@ -2341,21 +2372,6 @@
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
- /* The ipmi_register_smi() code does some operations to
- determine the channel information, so we must be ready to
- handle operations before it is called. This means we have
- to stop the timer if we get an error after this point. */
- init_timer(&(new_smi->si_timer));
- new_smi->si_timer.data = (long) new_smi;
- new_smi->si_timer.function = smi_timeout;
- new_smi->last_timeout_jiffies = jiffies;
- new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
-
- add_timer(&(new_smi->si_timer));
- if (new_smi->si_type != SI_BT)
- new_smi->thread = kthread_run(ipmi_thread, new_smi,
- "kipmi%d", new_smi->intf_num);
-
if (!new_smi->dev) {
/* If we don't already have a device from something
* else (like PCI), then register a new one. */
@@ -2365,7 +2381,7 @@
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
- goto out_err_stop_timer;
+ goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
new_smi->dev->driver = &ipmi_driver;
@@ -2377,7 +2393,7 @@
" Unable to register system interface device:"
" %d\n",
rv);
- goto out_err_stop_timer;
+ goto out_err;
}
new_smi->dev_registered = 1;
}
@@ -2386,8 +2402,7 @@
new_smi,
&new_smi->device_id,
new_smi->dev,
- new_smi->slave_addr,
- &(new_smi->intf));
+ new_smi->slave_addr);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to register device: error %d\n",
@@ -2417,7 +2432,7 @@
list_add_tail(&new_smi->link, &smi_infos);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
printk(" IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
@@ -2454,7 +2469,7 @@
kfree(new_smi);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
return rv;
}
@@ -2512,26 +2527,26 @@
#endif
if (si_trydefaults) {
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
/* No BMC was found, try defaults. */
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
default_find_bmc();
} else {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
}
}
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
printk("ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
return 0;
}
}
@@ -2607,10 +2622,10 @@
pci_unregister_driver(&ipmi_pci_driver);
#endif
- down(&smi_infos_lock);
+ mutex_lock(&smi_infos_lock);
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
cleanup_one_si(e);
- up(&smi_infos_lock);
+ mutex_unlock(&smi_infos_lock);
driver_unregister(&ipmi_driver);
}
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 7ece9f3..2d11ddd 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -39,6 +39,7 @@
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
+#include <linux/completion.h>
#include <linux/rwsem.h>
#include <linux/errno.h>
#include <asm/uaccess.h>
@@ -303,21 +304,22 @@
static void panic_halt_ipmi_heartbeat(void);
-/* We use a semaphore to make sure that only one thing can send a set
+/* We use a mutex to make sure that only one thing can send a set
timeout at one time, because we only have one copy of the data.
- The semaphore is claimed when the set_timeout is sent and freed
+ The mutex is claimed when the set_timeout is sent and freed
when both messages are free. */
static atomic_t set_timeout_tofree = ATOMIC_INIT(0);
-static DECLARE_MUTEX(set_timeout_lock);
+static DEFINE_MUTEX(set_timeout_lock);
+static DECLARE_COMPLETION(set_timeout_wait);
static void set_timeout_free_smi(struct ipmi_smi_msg *msg)
{
if (atomic_dec_and_test(&set_timeout_tofree))
- up(&set_timeout_lock);
+ complete(&set_timeout_wait);
}
static void set_timeout_free_recv(struct ipmi_recv_msg *msg)
{
if (atomic_dec_and_test(&set_timeout_tofree))
- up(&set_timeout_lock);
+ complete(&set_timeout_wait);
}
static struct ipmi_smi_msg set_timeout_smi_msg =
{
@@ -399,7 +401,7 @@
/* We can only send one of these at a time. */
- down(&set_timeout_lock);
+ mutex_lock(&set_timeout_lock);
atomic_set(&set_timeout_tofree, 2);
@@ -407,16 +409,21 @@
&set_timeout_recv_msg,
&send_heartbeat_now);
if (rv) {
- up(&set_timeout_lock);
- } else {
- if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
- || ((send_heartbeat_now)
- && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
- {
- rv = ipmi_heartbeat();
- }
+ mutex_unlock(&set_timeout_lock);
+ goto out;
}
+ wait_for_completion(&set_timeout_wait);
+
+ if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
+ || ((send_heartbeat_now)
+ && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
+ {
+ rv = ipmi_heartbeat();
+ }
+ mutex_unlock(&set_timeout_lock);
+
+out:
return rv;
}
@@ -458,17 +465,17 @@
The semaphore is claimed when the set_timeout is sent and freed
when both messages are free. */
static atomic_t heartbeat_tofree = ATOMIC_INIT(0);
-static DECLARE_MUTEX(heartbeat_lock);
-static DECLARE_MUTEX_LOCKED(heartbeat_wait_lock);
+static DEFINE_MUTEX(heartbeat_lock);
+static DECLARE_COMPLETION(heartbeat_wait);
static void heartbeat_free_smi(struct ipmi_smi_msg *msg)
{
if (atomic_dec_and_test(&heartbeat_tofree))
- up(&heartbeat_wait_lock);
+ complete(&heartbeat_wait);
}
static void heartbeat_free_recv(struct ipmi_recv_msg *msg)
{
if (atomic_dec_and_test(&heartbeat_tofree))
- up(&heartbeat_wait_lock);
+ complete(&heartbeat_wait);
}
static struct ipmi_smi_msg heartbeat_smi_msg =
{
@@ -511,14 +518,14 @@
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
}
- down(&heartbeat_lock);
+ mutex_lock(&heartbeat_lock);
atomic_set(&heartbeat_tofree, 2);
/* Don't reset the timer if we have the timer turned off, that
re-enables the watchdog. */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) {
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
return 0;
}
@@ -539,14 +546,14 @@
&heartbeat_recv_msg,
1);
if (rv) {
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
printk(KERN_WARNING PFX "heartbeat failure: %d\n",
rv);
return rv;
}
/* Wait for the heartbeat to be sent. */
- down(&heartbeat_wait_lock);
+ wait_for_completion(&heartbeat_wait);
if (heartbeat_recv_msg.msg.data[0] != 0) {
/* Got an error in the heartbeat response. It was already
@@ -555,7 +562,7 @@
rv = -EINVAL;
}
- up(&heartbeat_lock);
+ mutex_unlock(&heartbeat_lock);
return rv;
}
@@ -589,7 +596,7 @@
1);
}
-static struct watchdog_info ident=
+static struct watchdog_info ident =
{
.options = 0, /* WDIOF_SETTIMEOUT, */
.firmware_version = 1,
@@ -790,13 +797,13 @@
static int ipmi_close(struct inode *ino, struct file *filep)
{
- if (iminor(ino)==WATCHDOG_MINOR)
- {
+ if (iminor(ino) == WATCHDOG_MINOR) {
if (expect_close == 42) {
ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
} else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
ipmi_heartbeat();
}
clear_bit(0, &ipmi_wdog_open);
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index e5247f8..ef20c1f 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -706,7 +706,6 @@
static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
static int stli_getportstruct(stliport_t __user *arg);
static int stli_getbrdstruct(stlibrd_t __user *arg);
-static void *stli_memalloc(int len);
static stlibrd_t *stli_allocbrd(void);
static void stli_ecpinit(stlibrd_t *brdp);
@@ -997,17 +996,6 @@
/*****************************************************************************/
-/*
- * Local driver kernel malloc routine.
- */
-
-static void *stli_memalloc(int len)
-{
- return((void *) kmalloc(len, GFP_KERNEL));
-}
-
-/*****************************************************************************/
-
static int stli_open(struct tty_struct *tty, struct file *filp)
{
stlibrd_t *brdp;
@@ -3227,13 +3215,12 @@
#endif
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = (stliport_t *) stli_memalloc(sizeof(stliport_t));
- if (portp == (stliport_t *) NULL) {
+ portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
}
- memset(portp, 0, sizeof(stliport_t));
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
@@ -4610,14 +4597,13 @@
{
stlibrd_t *brdp;
- brdp = (stlibrd_t *) stli_memalloc(sizeof(stlibrd_t));
- if (brdp == (stlibrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlibrd_t));
- return((stlibrd_t *) NULL);
+ return NULL;
}
- memset(brdp, 0, sizeof(stlibrd_t));
brdp->magic = STLI_BOARDMAGIC;
return(brdp);
}
@@ -5210,12 +5196,12 @@
/*
* Allocate a temporary write buffer.
*/
- stli_tmpwritebuf = (char *) stli_memalloc(STLI_TXBUFSIZE);
- if (stli_tmpwritebuf == (char *) NULL)
+ stli_tmpwritebuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_tmpwritebuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
- stli_txcookbuf = stli_memalloc(STLI_TXBUFSIZE);
- if (stli_txcookbuf == (char *) NULL)
+ stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_txcookbuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 3f5d607..a9c5a72 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -504,7 +504,6 @@
static int stl_echpciintr(stlbrd_t *brdp);
static int stl_echpci64intr(stlbrd_t *brdp);
static void stl_offintr(void *private);
-static void *stl_memalloc(int len);
static stlbrd_t *stl_allocbrd(void);
static stlport_t *stl_getport(int brdnr, int panelnr, int portnr);
@@ -940,17 +939,6 @@
/*****************************************************************************/
/*
- * Local driver kernel memory allocation routine.
- */
-
-static void *stl_memalloc(int len)
-{
- return (void *) kmalloc(len, GFP_KERNEL);
-}
-
-/*****************************************************************************/
-
-/*
* Allocate a new board structure. Fill out the basic info in it.
*/
@@ -958,14 +946,13 @@
{
stlbrd_t *brdp;
- brdp = (stlbrd_t *) stl_memalloc(sizeof(stlbrd_t));
- if (brdp == (stlbrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
+ if (!brdp) {
printk("STALLION: failed to allocate memory (size=%d)\n",
sizeof(stlbrd_t));
- return (stlbrd_t *) NULL;
+ return NULL;
}
- memset(brdp, 0, sizeof(stlbrd_t));
brdp->magic = STL_BOARDMAGIC;
return brdp;
}
@@ -1017,9 +1004,9 @@
portp->refcount++;
if ((portp->flags & ASYNC_INITIALIZED) == 0) {
- if (portp->tx.buf == (char *) NULL) {
- portp->tx.buf = (char *) stl_memalloc(STL_TXBUFSIZE);
- if (portp->tx.buf == (char *) NULL)
+ if (!portp->tx.buf) {
+ portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
+ if (!portp->tx.buf)
return -ENOMEM;
portp->tx.head = portp->tx.buf;
portp->tx.tail = portp->tx.buf;
@@ -2178,13 +2165,12 @@
* each ports data structures.
*/
for (i = 0; (i < panelp->nrports); i++) {
- portp = (stlport_t *) stl_memalloc(sizeof(stlport_t));
- if (portp == (stlport_t *) NULL) {
+ portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlport_t));
break;
}
- memset(portp, 0, sizeof(stlport_t));
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
@@ -2315,13 +2301,12 @@
* can complete the setup.
*/
- panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
- if (panelp == (stlpanel_t *) NULL) {
+ panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ if (!panelp) {
printk(KERN_WARNING "STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlpanel_t));
- return(-ENOMEM);
+ return -ENOMEM;
}
- memset(panelp, 0, sizeof(stlpanel_t));
panelp->magic = STL_PANELMAGIC;
panelp->brdnr = brdp->brdnr;
@@ -2490,13 +2475,12 @@
status = inb(ioaddr + ECH_PNLSTATUS);
if ((status & ECH_PNLIDMASK) != nxtid)
break;
- panelp = (stlpanel_t *) stl_memalloc(sizeof(stlpanel_t));
- if (panelp == (stlpanel_t *) NULL) {
+ panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ if (!panelp) {
printk("STALLION: failed to allocate memory "
"(size=%d)\n", sizeof(stlpanel_t));
break;
}
- memset(panelp, 0, sizeof(stlpanel_t));
panelp->magic = STL_PANELMAGIC;
panelp->brdnr = brdp->brdnr;
panelp->panelnr = panelnr;
@@ -3074,8 +3058,8 @@
/*
* Allocate a temporary write buffer.
*/
- stl_tmpwritebuf = (char *) stl_memalloc(STL_TXBUFSIZE);
- if (stl_tmpwritebuf == (char *) NULL)
+ stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
+ if (!stl_tmpwritebuf)
printk("STALLION: failed to allocate memory (size=%d)\n",
STL_TXBUFSIZE);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 0bfd1b6..98b126c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -376,7 +376,7 @@
return copied;
}
-EXPORT_SYMBOL_GPL(tty_insert_flip_string);
+EXPORT_SYMBOL(tty_insert_flip_string);
int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size)
{
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index ca4844c..acc5d47 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2328,6 +2328,10 @@
case TIOCL_SETVESABLANK:
set_vesa_blanking(p);
break;
+ case TIOCL_GETKMSGREDIRECT:
+ data = kmsg_redirect;
+ ret = __put_user(data, p);
+ break;
case TIOCL_SETKMSGREDIRECT:
if (!capable(CAP_SYS_ADMIN)) {
ret = -EPERM;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index b582d0c..4f08984 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -71,7 +71,7 @@
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320)"
- depends on EDAC_MM_EDAC && PCI && X86
+ depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index ccf528d..a5017de 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -61,6 +61,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/leds.h>
#define _IDE_DISK
@@ -317,6 +318,8 @@
return ide_stopped;
}
+ ledtrig_ide_activity();
+
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
(unsigned long long)block, rq->nr_sectors,
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0606bd2..9233b81 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -375,7 +375,13 @@
}
}
- ide_end_request(drive, 1, rq->hard_nr_sectors);
+ if (rq->rq_disk) {
+ ide_driver_t *drv;
+
+ drv = *(ide_driver_t **)rq->rq_disk->private_data;;
+ drv->end_request(drive, 1, rq->hard_nr_sectors);
+ } else
+ ide_end_request(drive, 1, rq->hard_nr_sectors);
}
/*
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 94c9afb..f4f7122 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -46,7 +46,8 @@
pr_debug("%s: SCIOCRESET: ioctl received\n",
sc_adapter[card]->devicename);
sc_adapter[card]->StartOnReset = 0;
- return (reset(card));
+ kfree(rcvmsg);
+ return reset(card);
}
case SCIOCLOAD:
@@ -183,7 +184,7 @@
sc_adapter[card]->devicename);
spid = kmalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
- if(!spid) {
+ if (!spid) {
kfree(rcvmsg);
return -ENOMEM;
}
@@ -195,10 +196,10 @@
if (!status) {
pr_debug("%s: SCIOCGETSPID: command successful\n",
sc_adapter[card]->devicename);
- }
- else {
+ } else {
pr_debug("%s: SCIOCGETSPID: command failed (status = %d)\n",
sc_adapter[card]->devicename, status);
+ kfree(spid);
kfree(rcvmsg);
return status;
}
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
new file mode 100644
index 0000000..2c4f20b
--- /dev/null
+++ b/drivers/leds/Kconfig
@@ -0,0 +1,77 @@
+
+menu "LED devices"
+
+config NEW_LEDS
+ bool "LED Support"
+ help
+ Say Y to enable Linux LED support. This is not related to standard
+ keyboard LEDs which are controlled via the input system.
+
+config LEDS_CLASS
+ tristate "LED Class Support"
+ depends NEW_LEDS
+ help
+ This option enables the led sysfs class in /sys/class/leds. You'll
+ need this to do anything useful with LEDs. If unsure, say N.
+
+config LEDS_TRIGGERS
+ bool "LED Trigger support"
+ depends NEW_LEDS
+ help
+ This option enables trigger support for the leds class.
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
+config LEDS_CORGI
+ tristate "LED Support for the Sharp SL-C7x0 series"
+ depends LEDS_CLASS && PXA_SHARP_C7xx
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-C7x0 series (C700, C750, C760, C860).
+
+config LEDS_LOCOMO
+ tristate "LED Support for Locomo device"
+ depends LEDS_CLASS && SHARP_LOCOMO
+ help
+ This option enables support for the LEDs on Sharp Locomo.
+ Zaurus models SL-5500 and SL-5600.
+
+config LEDS_SPITZ
+ tristate "LED Support for the Sharp SL-Cxx00 series"
+ depends LEDS_CLASS && PXA_SHARP_Cxx00
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-Cxx00 series (C1000, C3000, C3100).
+
+config LEDS_IXP4XX
+ tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
+ depends LEDS_CLASS && ARCH_IXP4XX
+ help
+ This option enables support for the LEDs connected to GPIO
+ outputs of the Intel IXP4XX processors. To be useful the
+ particular board must have LEDs and they must be connected
+ to the GPIO lines. If unsure, say Y.
+
+config LEDS_TOSA
+ tristate "LED Support for the Sharp SL-6000 series"
+ depends LEDS_CLASS && PXA_SHARPSL
+ help
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-6000 series.
+
+config LEDS_TRIGGER_TIMER
+ tristate "LED Timer Trigger"
+ depends LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by a programmable timer
+ via sysfs. If unsure, say Y.
+
+config LEDS_TRIGGER_IDE_DISK
+ bool "LED Timer Trigger"
+ depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ help
+ This allows LEDs to be controlled by IDE disk activity.
+ If unsure, say Y.
+
+endmenu
+
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
new file mode 100644
index 0000000..40699d3
--- /dev/null
+++ b/drivers/leds/Makefile
@@ -0,0 +1,16 @@
+
+# LED Core
+obj-$(CONFIG_NEW_LEDS) += led-core.o
+obj-$(CONFIG_LEDS_CLASS) += led-class.o
+obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
+
+# LED Platform Drivers
+obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
+obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
+obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
+obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
+obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
+
+# LED Triggers
+obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
new file mode 100644
index 0000000..b0b5d05
--- /dev/null
+++ b/drivers/leds/led-class.c
@@ -0,0 +1,167 @@
+/*
+ * LED Class Core
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005-2006 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+static struct class *leds_class;
+
+static ssize_t led_brightness_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ ssize_t ret = 0;
+
+ /* no lock needed for this */
+ sprintf(buf, "%u\n", led_cdev->brightness);
+ ret = strlen(buf) + 1;
+
+ return ret;
+}
+
+static ssize_t led_brightness_store(struct class_device *dev,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ ssize_t ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ ret = after - buf;
+ led_set_brightness(led_cdev, state);
+ }
+
+ return ret;
+}
+
+static CLASS_DEVICE_ATTR(brightness, 0644, led_brightness_show,
+ led_brightness_store);
+#ifdef CONFIG_LEDS_TRIGGERS
+static CLASS_DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
+#endif
+
+/**
+ * led_classdev_suspend - suspend an led_classdev.
+ * @led_cdev: the led_classdev to suspend.
+ */
+void led_classdev_suspend(struct led_classdev *led_cdev)
+{
+ led_cdev->flags |= LED_SUSPENDED;
+ led_cdev->brightness_set(led_cdev, 0);
+}
+EXPORT_SYMBOL_GPL(led_classdev_suspend);
+
+/**
+ * led_classdev_resume - resume an led_classdev.
+ * @led_cdev: the led_classdev to resume.
+ */
+void led_classdev_resume(struct led_classdev *led_cdev)
+{
+ led_cdev->brightness_set(led_cdev, led_cdev->brightness);
+ led_cdev->flags &= ~LED_SUSPENDED;
+}
+EXPORT_SYMBOL_GPL(led_classdev_resume);
+
+/**
+ * led_classdev_register - register a new object of led_classdev class.
+ * @dev: The device to register.
+ * @led_cdev: the led_classdev structure for this device.
+ */
+int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
+{
+ led_cdev->class_dev = class_device_create(leds_class, NULL, 0,
+ parent, "%s", led_cdev->name);
+ if (unlikely(IS_ERR(led_cdev->class_dev)))
+ return PTR_ERR(led_cdev->class_dev);
+
+ class_set_devdata(led_cdev->class_dev, led_cdev);
+
+ /* register the attributes */
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_brightness);
+
+ /* add to the list of leds */
+ write_lock(&leds_list_lock);
+ list_add_tail(&led_cdev->node, &leds_list);
+ write_unlock(&leds_list_lock);
+
+#ifdef CONFIG_LEDS_TRIGGERS
+ rwlock_init(&led_cdev->trigger_lock);
+
+ led_trigger_set_default(led_cdev);
+
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_trigger);
+#endif
+
+ printk(KERN_INFO "Registered led device: %s\n",
+ led_cdev->class_dev->class_id);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(led_classdev_register);
+
+/**
+ * led_classdev_unregister - unregisters a object of led_properties class.
+ * @led_cdev: the led device to unreigister
+ *
+ * Unregisters a previously registered via led_classdev_register object.
+ */
+void led_classdev_unregister(struct led_classdev *led_cdev)
+{
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_brightness);
+#ifdef CONFIG_LEDS_TRIGGERS
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_trigger);
+ write_lock(&led_cdev->trigger_lock);
+ if (led_cdev->trigger)
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+#endif
+
+ class_device_unregister(led_cdev->class_dev);
+
+ write_lock(&leds_list_lock);
+ list_del(&led_cdev->node);
+ write_unlock(&leds_list_lock);
+}
+EXPORT_SYMBOL_GPL(led_classdev_unregister);
+
+static int __init leds_init(void)
+{
+ leds_class = class_create(THIS_MODULE, "leds");
+ if (IS_ERR(leds_class))
+ return PTR_ERR(leds_class);
+ return 0;
+}
+
+static void __exit leds_exit(void)
+{
+ class_destroy(leds_class);
+}
+
+subsys_initcall(leds_init);
+module_exit(leds_exit);
+
+MODULE_AUTHOR("John Lenz, Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Class Interface");
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
new file mode 100644
index 0000000..fe65413
--- /dev/null
+++ b/drivers/leds/led-core.c
@@ -0,0 +1,25 @@
+/*
+ * LED Class Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+rwlock_t leds_list_lock = RW_LOCK_UNLOCKED;
+LIST_HEAD(leds_list);
+
+EXPORT_SYMBOL_GPL(leds_list);
+EXPORT_SYMBOL_GPL(leds_list_lock);
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
new file mode 100644
index 0000000..5e2cd8b
--- /dev/null
+++ b/drivers/leds/led-triggers.c
@@ -0,0 +1,239 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+/*
+ * Nests outside led_cdev->trigger_lock
+ */
+static rwlock_t triggers_list_lock = RW_LOCK_UNLOCKED;
+static LIST_HEAD(trigger_list);
+
+ssize_t led_trigger_store(struct class_device *dev, const char *buf,
+ size_t count)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ char trigger_name[TRIG_NAME_MAX];
+ struct led_trigger *trig;
+ size_t len;
+
+ trigger_name[sizeof(trigger_name) - 1] = '\0';
+ strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
+ len = strlen(trigger_name);
+
+ if (len && trigger_name[len - 1] == '\n')
+ trigger_name[len - 1] = '\0';
+
+ if (!strcmp(trigger_name, "none")) {
+ write_lock(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+ return count;
+ }
+
+ read_lock(&triggers_list_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(trigger_name, trig->name)) {
+ write_lock(&led_cdev->trigger_lock);
+ led_trigger_set(led_cdev, trig);
+ write_unlock(&led_cdev->trigger_lock);
+
+ read_unlock(&triggers_list_lock);
+ return count;
+ }
+ }
+ read_unlock(&triggers_list_lock);
+
+ return -EINVAL;
+}
+
+
+ssize_t led_trigger_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct led_trigger *trig;
+ int len = 0;
+
+ read_lock(&triggers_list_lock);
+ read_lock(&led_cdev->trigger_lock);
+
+ if (!led_cdev->trigger)
+ len += sprintf(buf+len, "[none] ");
+ else
+ len += sprintf(buf+len, "none ");
+
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (led_cdev->trigger && !strcmp(led_cdev->trigger->name,
+ trig->name))
+ len += sprintf(buf+len, "[%s] ", trig->name);
+ else
+ len += sprintf(buf+len, "%s ", trig->name);
+ }
+ read_unlock(&led_cdev->trigger_lock);
+ read_unlock(&triggers_list_lock);
+
+ len += sprintf(len+buf, "\n");
+ return len;
+}
+
+void led_trigger_event(struct led_trigger *trigger,
+ enum led_brightness brightness)
+{
+ struct list_head *entry;
+
+ if (!trigger)
+ return;
+
+ read_lock(&trigger->leddev_list_lock);
+ list_for_each(entry, &trigger->led_cdevs) {
+ struct led_classdev *led_cdev;
+
+ led_cdev = list_entry(entry, struct led_classdev, trig_list);
+ led_set_brightness(led_cdev, brightness);
+ }
+ read_unlock(&trigger->leddev_list_lock);
+}
+
+/* Caller must ensure led_cdev->trigger_lock held */
+void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
+{
+ unsigned long flags;
+
+ /* Remove any existing trigger */
+ if (led_cdev->trigger) {
+ write_lock_irqsave(&led_cdev->trigger->leddev_list_lock, flags);
+ list_del(&led_cdev->trig_list);
+ write_unlock_irqrestore(&led_cdev->trigger->leddev_list_lock, flags);
+ if (led_cdev->trigger->deactivate)
+ led_cdev->trigger->deactivate(led_cdev);
+ }
+ if (trigger) {
+ write_lock_irqsave(&trigger->leddev_list_lock, flags);
+ list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
+ write_unlock_irqrestore(&trigger->leddev_list_lock, flags);
+ if (trigger->activate)
+ trigger->activate(led_cdev);
+ }
+ led_cdev->trigger = trigger;
+}
+
+void led_trigger_set_default(struct led_classdev *led_cdev)
+{
+ struct led_trigger *trig;
+
+ if (!led_cdev->default_trigger)
+ return;
+
+ read_lock(&triggers_list_lock);
+ write_lock(&led_cdev->trigger_lock);
+ list_for_each_entry(trig, &trigger_list, next_trig) {
+ if (!strcmp(led_cdev->default_trigger, trig->name))
+ led_trigger_set(led_cdev, trig);
+ }
+ write_unlock(&led_cdev->trigger_lock);
+ read_unlock(&triggers_list_lock);
+}
+
+int led_trigger_register(struct led_trigger *trigger)
+{
+ struct led_classdev *led_cdev;
+
+ rwlock_init(&trigger->leddev_list_lock);
+ INIT_LIST_HEAD(&trigger->led_cdevs);
+
+ /* Add to the list of led triggers */
+ write_lock(&triggers_list_lock);
+ list_add_tail(&trigger->next_trig, &trigger_list);
+ write_unlock(&triggers_list_lock);
+
+ /* Register with any LEDs that have this as a default trigger */
+ read_lock(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ write_lock(&led_cdev->trigger_lock);
+ if (!led_cdev->trigger && led_cdev->default_trigger &&
+ !strcmp(led_cdev->default_trigger, trigger->name))
+ led_trigger_set(led_cdev, trigger);
+ write_unlock(&led_cdev->trigger_lock);
+ }
+ read_unlock(&leds_list_lock);
+
+ return 0;
+}
+
+void led_trigger_register_simple(const char *name, struct led_trigger **tp)
+{
+ struct led_trigger *trigger;
+
+ trigger = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+
+ if (trigger) {
+ trigger->name = name;
+ led_trigger_register(trigger);
+ }
+ *tp = trigger;
+}
+
+void led_trigger_unregister(struct led_trigger *trigger)
+{
+ struct led_classdev *led_cdev;
+
+ /* Remove from the list of led triggers */
+ write_lock(&triggers_list_lock);
+ list_del(&trigger->next_trig);
+ write_unlock(&triggers_list_lock);
+
+ /* Remove anyone actively using this trigger */
+ read_lock(&leds_list_lock);
+ list_for_each_entry(led_cdev, &leds_list, node) {
+ write_lock(&led_cdev->trigger_lock);
+ if (led_cdev->trigger == trigger)
+ led_trigger_set(led_cdev, NULL);
+ write_unlock(&led_cdev->trigger_lock);
+ }
+ read_unlock(&leds_list_lock);
+}
+
+void led_trigger_unregister_simple(struct led_trigger *trigger)
+{
+ led_trigger_unregister(trigger);
+ kfree(trigger);
+}
+
+/* Used by LED Class */
+EXPORT_SYMBOL_GPL(led_trigger_set);
+EXPORT_SYMBOL_GPL(led_trigger_set_default);
+EXPORT_SYMBOL_GPL(led_trigger_show);
+EXPORT_SYMBOL_GPL(led_trigger_store);
+
+/* LED Trigger Interface */
+EXPORT_SYMBOL_GPL(led_trigger_register);
+EXPORT_SYMBOL_GPL(led_trigger_unregister);
+
+/* Simple LED Tigger Interface */
+EXPORT_SYMBOL_GPL(led_trigger_register_simple);
+EXPORT_SYMBOL_GPL(led_trigger_unregister_simple);
+EXPORT_SYMBOL_GPL(led_trigger_event);
+
+MODULE_AUTHOR("Richard Purdie");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LED Triggers Core");
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
new file mode 100644
index 0000000..bb7d84d
--- /dev/null
+++ b/drivers/leds/leds-corgi.c
@@ -0,0 +1,121 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/arch/corgi.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/hardware/scoop.h>
+
+static void corgiled_amber_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+ else
+ GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
+}
+
+static void corgiled_green_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+}
+
+static struct led_classdev corgi_amber_led = {
+ .name = "corgi:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = corgiled_amber_set,
+};
+
+static struct led_classdev corgi_green_led = {
+ .name = "corgi:green",
+ .default_trigger = "nand-disk",
+ .brightness_set = corgiled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int corgiled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (corgi_amber_led.trigger && strcmp(corgi_amber_led.trigger->name, "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&corgi_amber_led);
+ led_classdev_suspend(&corgi_green_led);
+ return 0;
+}
+
+static int corgiled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&corgi_amber_led);
+ led_classdev_resume(&corgi_green_led);
+ return 0;
+}
+#endif
+
+static int corgiled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &corgi_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &corgi_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&corgi_amber_led);
+
+ return ret;
+}
+
+static int corgiled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&corgi_amber_led);
+ led_classdev_unregister(&corgi_green_led);
+ return 0;
+}
+
+static struct platform_driver corgiled_driver = {
+ .probe = corgiled_probe,
+ .remove = corgiled_remove,
+#ifdef CONFIG_PM
+ .suspend = corgiled_suspend,
+ .resume = corgiled_resume,
+#endif
+ .driver = {
+ .name = "corgi-led",
+ },
+};
+
+static int __init corgiled_init(void)
+{
+ return platform_driver_register(&corgiled_driver);
+}
+
+static void __exit corgiled_exit(void)
+{
+ platform_driver_unregister(&corgiled_driver);
+}
+
+module_init(corgiled_init);
+module_exit(corgiled_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Corgi LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-ixp4xx-gpio.c b/drivers/leds/leds-ixp4xx-gpio.c
new file mode 100644
index 0000000..30ced15
--- /dev/null
+++ b/drivers/leds/leds-ixp4xx-gpio.c
@@ -0,0 +1,215 @@
+/*
+ * IXP4XX GPIO driver LED driver
+ *
+ * Author: John Bowler <jbowler@acm.org>
+ *
+ * Copyright (c) 2006 John Bowler
+ *
+ * Permission is hereby granted, free of charge, to any
+ * person obtaining a copy of this software and associated
+ * documentation files (the "Software"), to deal in the
+ * Software without restriction, including without
+ * limitation the rights to use, copy, modify, merge,
+ * publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the
+ * following conditions:
+ *
+ * The above copyright notice and this permission notice
+ * shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ * ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+ * TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+ * SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/leds.h>
+#include <asm/arch/hardware.h>
+
+extern spinlock_t gpio_lock;
+
+/* Up to 16 gpio lines are possible. */
+#define GPIO_MAX 16
+static struct ixp4xxgpioled_device {
+ struct led_classdev ancestor;
+ int flags;
+} ixp4xxgpioled_devices[GPIO_MAX];
+
+void ixp4xxgpioled_brightness_set(struct led_classdev *pled,
+ enum led_brightness value)
+{
+ const struct ixp4xxgpioled_device *const ixp4xx_dev =
+ container_of(pled, struct ixp4xxgpioled_device, ancestor);
+ const u32 gpio_pin = ixp4xx_dev - ixp4xxgpioled_devices;
+
+ if (gpio_pin < GPIO_MAX && ixp4xx_dev->ancestor.name != 0) {
+ /* Set or clear the 'gpio_pin' bit according to the style
+ * and the required setting (value > 0 == on)
+ */
+ const int gpio_value =
+ (value > 0) == (ixp4xx_dev->flags != IXP4XX_GPIO_LOW) ?
+ IXP4XX_GPIO_HIGH : IXP4XX_GPIO_LOW;
+
+ {
+ unsigned long flags;
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_line_set(gpio_pin, gpio_value);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ }
+ }
+}
+
+/* LEDs are described in resources, the following iterates over the valid
+ * LED resources.
+ */
+#define for_all_leds(i, pdev) \
+ for (i=0; i<pdev->num_resources; ++i) \
+ if (pdev->resource[i].start < GPIO_MAX && \
+ pdev->resource[i].name != 0)
+
+/* The following applies 'operation' to each LED from the given platform,
+ * the function always returns 0 to allow tail call elimination.
+ */
+static int apply_to_all_leds(struct platform_device *pdev,
+ void (*operation)(struct led_classdev *pled))
+{
+ int i;
+
+ for_all_leds(i, pdev)
+ operation(&ixp4xxgpioled_devices[pdev->resource[i].start].ancestor);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixp4xxgpioled_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return apply_to_all_leds(pdev, led_classdev_suspend);
+}
+
+static int ixp4xxgpioled_resume(struct platform_device *pdev)
+{
+ return apply_to_all_leds(pdev, led_classdev_resume);
+}
+#endif
+
+static void ixp4xxgpioled_remove_one_led(struct led_classdev *pled)
+{
+ led_classdev_unregister(pled);
+ pled->name = 0;
+}
+
+static int ixp4xxgpioled_remove(struct platform_device *pdev)
+{
+ return apply_to_all_leds(pdev, ixp4xxgpioled_remove_one_led);
+}
+
+static int ixp4xxgpioled_probe(struct platform_device *pdev)
+{
+ /* The board level has to tell the driver where the
+ * LEDs are connected - there is no way to find out
+ * electrically. It must also say whether the GPIO
+ * lines are active high or active low.
+ *
+ * To do this read the num_resources (the number of
+ * LEDs) and the struct resource (the data for each
+ * LED). The name comes from the resource, and it
+ * isn't copied.
+ */
+ int i;
+
+ for_all_leds(i, pdev) {
+ const u8 gpio_pin = pdev->resource[i].start;
+ int rc;
+
+ if (ixp4xxgpioled_devices[gpio_pin].ancestor.name == 0) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_line_config(gpio_pin, IXP4XX_GPIO_OUT);
+ /* The config can, apparently, reset the state,
+ * I suspect the gpio line may be an input and
+ * the config may cause the line to be latched,
+ * so the setting depends on how the LED is
+ * connected to the line (which affects how it
+ * floats if not driven).
+ */
+ gpio_line_set(gpio_pin, IXP4XX_GPIO_HIGH);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ ixp4xxgpioled_devices[gpio_pin].flags =
+ pdev->resource[i].flags & IORESOURCE_BITS;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.name =
+ pdev->resource[i].name;
+
+ /* This is how a board manufacturer makes the LED
+ * come on on reset - the GPIO line will be high, so
+ * make the LED light when the line is low...
+ */
+ if (ixp4xxgpioled_devices[gpio_pin].flags != IXP4XX_GPIO_LOW)
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness = 100;
+ else
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness = 0;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.flags = 0;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.brightness_set =
+ ixp4xxgpioled_brightness_set;
+
+ ixp4xxgpioled_devices[gpio_pin].ancestor.default_trigger = 0;
+ }
+
+ rc = led_classdev_register(&pdev->dev,
+ &ixp4xxgpioled_devices[gpio_pin].ancestor);
+ if (rc < 0) {
+ ixp4xxgpioled_devices[gpio_pin].ancestor.name = 0;
+ ixp4xxgpioled_remove(pdev);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver ixp4xxgpioled_driver = {
+ .probe = ixp4xxgpioled_probe,
+ .remove = ixp4xxgpioled_remove,
+#ifdef CONFIG_PM
+ .suspend = ixp4xxgpioled_suspend,
+ .resume = ixp4xxgpioled_resume,
+#endif
+ .driver = {
+ .name = "IXP4XX-GPIO-LED",
+ },
+};
+
+static int __init ixp4xxgpioled_init(void)
+{
+ return platform_driver_register(&ixp4xxgpioled_driver);
+}
+
+static void __exit ixp4xxgpioled_exit(void)
+{
+ platform_driver_unregister(&ixp4xxgpioled_driver);
+}
+
+module_init(ixp4xxgpioled_init);
+module_exit(ixp4xxgpioled_exit);
+
+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
+MODULE_DESCRIPTION("IXP4XX GPIO LED driver");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
new file mode 100644
index 0000000..749a86c
--- /dev/null
+++ b/drivers/leds/leds-locomo.c
@@ -0,0 +1,95 @@
+/*
+ * linux/drivers/leds/locomo.c
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/locomo.h>
+
+static void locomoled_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value, int offset)
+{
+ struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->class_dev->dev);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value)
+ locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
+ else
+ locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
+ local_irq_restore(flags);
+}
+
+static void locomoled_brightness_set0(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
+}
+
+static void locomoled_brightness_set1(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
+}
+
+static struct led_classdev locomo_led0 = {
+ .name = "locomo:amber",
+ .brightness_set = locomoled_brightness_set0,
+};
+
+static struct led_classdev locomo_led1 = {
+ .name = "locomo:green",
+ .brightness_set = locomoled_brightness_set1,
+};
+
+static int locomoled_probe(struct locomo_dev *ldev)
+{
+ int ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led0);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&ldev->dev, &locomo_led1);
+ if (ret < 0)
+ led_classdev_unregister(&locomo_led0);
+
+ return ret;
+}
+
+static int locomoled_remove(struct locomo_dev *dev)
+{
+ led_classdev_unregister(&locomo_led0);
+ led_classdev_unregister(&locomo_led1);
+ return 0;
+}
+
+static struct locomo_driver locomoled_driver = {
+ .drv = {
+ .name = "locomoled"
+ },
+ .devid = LOCOMO_DEVID_LED,
+ .probe = locomoled_probe,
+ .remove = locomoled_remove,
+};
+
+static int __init locomoled_init(void)
+{
+ return locomo_driver_register(&locomoled_driver);
+}
+module_init(locomoled_init);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
+MODULE_DESCRIPTION("Locomo LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
new file mode 100644
index 0000000..65bbef4
--- /dev/null
+++ b/drivers/leds/leds-spitz.c
@@ -0,0 +1,125 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/spitz.h>
+
+static void spitzled_amber_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+ else
+ reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
+}
+
+static void spitzled_green_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+ else
+ reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+}
+
+static struct led_classdev spitz_amber_led = {
+ .name = "spitz:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = spitzled_amber_set,
+};
+
+static struct led_classdev spitz_green_led = {
+ .name = "spitz:green",
+ .default_trigger = "ide-disk",
+ .brightness_set = spitzled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int spitzled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (spitz_amber_led.trigger && strcmp(spitz_amber_led.trigger->name, "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&spitz_amber_led);
+ led_classdev_suspend(&spitz_green_led);
+ return 0;
+}
+
+static int spitzled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&spitz_amber_led);
+ led_classdev_resume(&spitz_green_led);
+ return 0;
+}
+#endif
+
+static int spitzled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (machine_is_akita())
+ spitz_green_led.default_trigger = "nand-disk";
+
+ ret = led_classdev_register(&pdev->dev, &spitz_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &spitz_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&spitz_amber_led);
+
+ return ret;
+}
+
+static int spitzled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&spitz_amber_led);
+ led_classdev_unregister(&spitz_green_led);
+
+ return 0;
+}
+
+static struct platform_driver spitzled_driver = {
+ .probe = spitzled_probe,
+ .remove = spitzled_remove,
+#ifdef CONFIG_PM
+ .suspend = spitzled_suspend,
+ .resume = spitzled_resume,
+#endif
+ .driver = {
+ .name = "spitz-led",
+ },
+};
+
+static int __init spitzled_init(void)
+{
+ return platform_driver_register(&spitzled_driver);
+}
+
+static void __exit spitzled_exit(void)
+{
+ platform_driver_unregister(&spitzled_driver);
+}
+
+module_init(spitzled_init);
+module_exit(spitzled_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Spitz LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c
new file mode 100644
index 0000000..c9e8cc1
--- /dev/null
+++ b/drivers/leds/leds-tosa.c
@@ -0,0 +1,131 @@
+/*
+ * LED Triggers Core
+ *
+ * Copyright 2005 Dirk Opfer
+ *
+ * Author: Dirk Opfer <Dirk@Opfer-Online.de>
+ * based on spitz.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/tosa.h>
+
+static void tosaled_amber_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_CHRG_ERR_LED);
+ else
+ reset_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_CHRG_ERR_LED);
+}
+
+static void tosaled_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ set_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_NOTE_LED);
+ else
+ reset_scoop_gpio(&tosascoop_jc_device.dev,
+ TOSA_SCOOP_JC_NOTE_LED);
+}
+
+static struct led_classdev tosa_amber_led = {
+ .name = "tosa:amber",
+ .default_trigger = "sharpsl-charge",
+ .brightness_set = tosaled_amber_set,
+};
+
+static struct led_classdev tosa_green_led = {
+ .name = "tosa:green",
+ .default_trigger = "nand-disk",
+ .brightness_set = tosaled_green_set,
+};
+
+#ifdef CONFIG_PM
+static int tosaled_suspend(struct platform_device *dev, pm_message_t state)
+{
+#ifdef CONFIG_LEDS_TRIGGERS
+ if (tosa_amber_led.trigger && strcmp(tosa_amber_led.trigger->name,
+ "sharpsl-charge"))
+#endif
+ led_classdev_suspend(&tosa_amber_led);
+ led_classdev_suspend(&tosa_green_led);
+ return 0;
+}
+
+static int tosaled_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&tosa_amber_led);
+ led_classdev_resume(&tosa_green_led);
+ return 0;
+}
+#else
+#define tosaled_suspend NULL
+#define tosaled_resume NULL
+#endif
+
+static int tosaled_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &tosa_amber_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &tosa_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&tosa_amber_led);
+
+ return ret;
+}
+
+static int tosaled_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&tosa_amber_led);
+ led_classdev_unregister(&tosa_green_led);
+
+ return 0;
+}
+
+static struct platform_driver tosaled_driver = {
+ .probe = tosaled_probe,
+ .remove = tosaled_remove,
+ .suspend = tosaled_suspend,
+ .resume = tosaled_resume,
+ .driver = {
+ .name = "tosa-led",
+ },
+};
+
+static int __init tosaled_init(void)
+{
+ return platform_driver_register(&tosaled_driver);
+}
+
+static void __exit tosaled_exit(void)
+{
+ platform_driver_unregister(&tosaled_driver);
+}
+
+module_init(tosaled_init);
+module_exit(tosaled_exit);
+
+MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
+MODULE_DESCRIPTION("Tosa LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
new file mode 100644
index 0000000..a715c4e
--- /dev/null
+++ b/drivers/leds/leds.h
@@ -0,0 +1,44 @@
+/*
+ * LED Core
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LEDS_H_INCLUDED
+#define __LEDS_H_INCLUDED
+
+#include <linux/leds.h>
+
+static inline void led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value > LED_FULL)
+ value = LED_FULL;
+ led_cdev->brightness = value;
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ led_cdev->brightness_set(led_cdev, value);
+}
+
+extern rwlock_t leds_list_lock;
+extern struct list_head leds_list;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+void led_trigger_set_default(struct led_classdev *led_cdev);
+void led_trigger_set(struct led_classdev *led_cdev,
+ struct led_trigger *trigger);
+#else
+#define led_trigger_set_default(x) do {} while(0)
+#define led_trigger_set(x, y) do {} while(0)
+#endif
+
+ssize_t led_trigger_store(struct class_device *dev, const char *buf,
+ size_t count);
+ssize_t led_trigger_show(struct class_device *dev, char *buf);
+
+#endif /* __LEDS_H_INCLUDED */
diff --git a/drivers/leds/ledtrig-ide-disk.c b/drivers/leds/ledtrig-ide-disk.c
new file mode 100644
index 0000000..fa65188
--- /dev/null
+++ b/drivers/leds/ledtrig-ide-disk.c
@@ -0,0 +1,62 @@
+/*
+ * LED IDE-Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+
+static void ledtrig_ide_timerfunc(unsigned long data);
+
+DEFINE_LED_TRIGGER(ledtrig_ide);
+static DEFINE_TIMER(ledtrig_ide_timer, ledtrig_ide_timerfunc, 0, 0);
+static int ide_activity;
+static int ide_lastactivity;
+
+void ledtrig_ide_activity(void)
+{
+ ide_activity++;
+ if (!timer_pending(&ledtrig_ide_timer))
+ mod_timer(&ledtrig_ide_timer, jiffies + msecs_to_jiffies(10));
+}
+EXPORT_SYMBOL(ledtrig_ide_activity);
+
+static void ledtrig_ide_timerfunc(unsigned long data)
+{
+ if (ide_lastactivity != ide_activity) {
+ ide_lastactivity = ide_activity;
+ led_trigger_event(ledtrig_ide, LED_FULL);
+ mod_timer(&ledtrig_ide_timer, jiffies + msecs_to_jiffies(10));
+ } else {
+ led_trigger_event(ledtrig_ide, LED_OFF);
+ }
+}
+
+static int __init ledtrig_ide_init(void)
+{
+ led_trigger_register_simple("ide-disk", &ledtrig_ide);
+ return 0;
+}
+
+static void __exit ledtrig_ide_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_ide);
+}
+
+module_init(ledtrig_ide_init);
+module_exit(ledtrig_ide_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("LED IDE Disk Activity Trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
new file mode 100644
index 0000000..f484b5d6
--- /dev/null
+++ b/drivers/leds/ledtrig-timer.c
@@ -0,0 +1,170 @@
+/*
+ * LED Kernel Timer Trigger
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+struct timer_trig_data {
+ unsigned long delay_on; /* milliseconds on */
+ unsigned long delay_off; /* milliseconds off */
+ struct timer_list timer;
+};
+
+static void led_timer_function(unsigned long data)
+{
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ unsigned long brightness = LED_OFF;
+ unsigned long delay = timer_data->delay_off;
+
+ if (!timer_data->delay_on || !timer_data->delay_off) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
+ if (!led_cdev->brightness) {
+ brightness = LED_FULL;
+ delay = timer_data->delay_on;
+ }
+
+ led_set_brightness(led_cdev, brightness);
+
+ mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static ssize_t led_delay_on_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ sprintf(buf, "%lu\n", timer_data->delay_on);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ int ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ timer_data->delay_on = state;
+ mod_timer(&timer_data->timer, jiffies + 1);
+ ret = after - buf;
+ }
+
+ return ret;
+}
+
+static ssize_t led_delay_off_show(struct class_device *dev, char *buf)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ sprintf(buf, "%lu\n", timer_data->delay_off);
+
+ return strlen(buf) + 1;
+}
+
+static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
+ size_t size)
+{
+ struct led_classdev *led_cdev = class_get_devdata(dev);
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+ int ret = -EINVAL;
+ char *after;
+ unsigned long state = simple_strtoul(buf, &after, 10);
+
+ if (after - buf > 0) {
+ timer_data->delay_off = state;
+ mod_timer(&timer_data->timer, jiffies + 1);
+ ret = after - buf;
+ }
+
+ return ret;
+}
+
+static CLASS_DEVICE_ATTR(delay_on, 0644, led_delay_on_show,
+ led_delay_on_store);
+static CLASS_DEVICE_ATTR(delay_off, 0644, led_delay_off_show,
+ led_delay_off_store);
+
+static void timer_trig_activate(struct led_classdev *led_cdev)
+{
+ struct timer_trig_data *timer_data;
+
+ timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
+ if (!timer_data)
+ return;
+
+ led_cdev->trigger_data = timer_data;
+
+ init_timer(&timer_data->timer);
+ timer_data->timer.function = led_timer_function;
+ timer_data->timer.data = (unsigned long) led_cdev;
+
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_delay_on);
+ class_device_create_file(led_cdev->class_dev,
+ &class_device_attr_delay_off);
+}
+
+static void timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct timer_trig_data *timer_data = led_cdev->trigger_data;
+
+ if (timer_data) {
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_delay_on);
+ class_device_remove_file(led_cdev->class_dev,
+ &class_device_attr_delay_off);
+ del_timer_sync(&timer_data->timer);
+ kfree(timer_data);
+ }
+}
+
+static struct led_trigger timer_led_trigger = {
+ .name = "timer",
+ .activate = timer_trig_activate,
+ .deactivate = timer_trig_deactivate,
+};
+
+static int __init timer_trig_init(void)
+{
+ return led_trigger_register(&timer_led_trigger);
+}
+
+static void __exit timer_trig_exit(void)
+{
+ led_trigger_unregister(&timer_led_trigger);
+}
+
+module_init(timer_trig_init);
+module_exit(timer_trig_exit);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Timer LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 039e071..1ed5152 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -215,13 +215,11 @@
return;
if (!mddev->raid_disks && list_empty(&mddev->disks)) {
list_del(&mddev->all_mddevs);
- /* that blocks */
+ spin_unlock(&all_mddevs_lock);
blk_cleanup_queue(mddev->queue);
- /* that also blocks */
kobject_unregister(&mddev->kobj);
- /* result blows... */
- }
- spin_unlock(&all_mddevs_lock);
+ } else
+ spin_unlock(&all_mddevs_lock);
}
static mddev_t * mddev_find(dev_t unit)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 3cb0872..9b374c9 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1135,8 +1135,19 @@
mirror = i;
break;
}
- if (!uptodate)
+ if (!uptodate) {
+ int sync_blocks = 0;
+ sector_t s = r1_bio->sector;
+ long sectors_to_go = r1_bio->sectors;
+ /* make sure these bits doesn't get cleared. */
+ do {
+ bitmap_end_sync(mddev->bitmap, r1_bio->sector,
+ &sync_blocks, 1);
+ s += sync_blocks;
+ sectors_to_go -= sync_blocks;
+ } while (sectors_to_go > 0);
md_error(mddev, conf->mirrors[mirror].rdev);
+ }
update_head_pos(mirror, r1_bio);
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index 6df4930..ab64b37 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -2151,6 +2151,8 @@
}
/* Ok, everything is just fine now */
+ sysfs_create_group(&mddev->kobj, &raid6_attrs_group);
+
mddev->array_size = mddev->size * (mddev->raid_disks - 2);
mddev->queue->unplug_fn = raid6_unplug_device;
diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c
index 3021f21..0b00e60 100644
--- a/drivers/media/video/cpia_pp.c
+++ b/drivers/media/video/cpia_pp.c
@@ -873,7 +873,7 @@
parport_nr[parport_ptr++] = PPCPIA_PARPORT_NONE;
}
- return 0;
+ return 1;
}
__setup("cpia_pp=", cpia_pp_setup);
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c
index fdb91b6..5711561 100644
--- a/drivers/mtd/chips/amd_flash.c
+++ b/drivers/mtd/chips/amd_flash.c
@@ -664,7 +664,7 @@
printk("%s: Probing for AMD compatible flash...\n", map->name);
if ((table_pos[0] = probe_new_chip(mtd, 0, NULL, &temp, table,
- sizeof(table)/sizeof(table[0])))
+ ARRAY_SIZE(table)))
== -1) {
printk(KERN_WARNING
"%s: Found no AMD compatible device at location zero\n",
@@ -696,7 +696,7 @@
base += (1 << temp.chipshift)) {
int numchips = temp.numchips;
table_pos[numchips] = probe_new_chip(mtd, base, chips,
- &temp, table, sizeof(table)/sizeof(table[0]));
+ &temp, table, ARRAY_SIZE(table));
}
mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) *
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index edb306c..517ea33 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -34,6 +34,7 @@
#define MANUFACTURER_MACRONIX 0x00C2
#define MANUFACTURER_NEC 0x0010
#define MANUFACTURER_PMC 0x009D
+#define MANUFACTURER_SHARP 0x00b0
#define MANUFACTURER_SST 0x00BF
#define MANUFACTURER_ST 0x0020
#define MANUFACTURER_TOSHIBA 0x0098
@@ -124,6 +125,9 @@
#define PM49FL004 0x006E
#define PM49FL008 0x006A
+/* Sharp */
+#define LH28F640BF 0x00b0
+
/* ST - www.st.com */
#define M29W800DT 0x00D7
#define M29W800DB 0x005B
@@ -1267,6 +1271,19 @@
.regions = {
ERASEINFO( 0x01000, 256 )
}
+ }, {
+ .mfr_id = MANUFACTURER_SHARP,
+ .dev_id = LH28F640BF,
+ .name = "LH28F640BF",
+ .uaddr = {
+ [0] = MTD_UADDR_UNNECESSARY, /* x8 */
+ },
+ .DevSize = SIZE_4MiB,
+ .CmdSet = P_ID_INTEL_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x40000,16),
+ }
}, {
.mfr_id = MANUFACTURER_SST,
.dev_id = SST39LF512,
@@ -2035,7 +2052,7 @@
DEBUG(MTD_DEBUG_LEVEL3,
"Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
- for (i=0; i<sizeof(jedec_table)/sizeof(jedec_table[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
DEBUG( MTD_DEBUG_LEVEL3,
"MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c
index 36f61a6..3cc0b23 100644
--- a/drivers/mtd/chips/sharp.c
+++ b/drivers/mtd/chips/sharp.c
@@ -64,7 +64,7 @@
#undef AUTOUNLOCK /* automatically unlocks blocks before erasing */
-struct mtd_info *sharp_probe(struct map_info *);
+static struct mtd_info *sharp_probe(struct map_info *);
static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd);
@@ -96,7 +96,6 @@
struct flchip chips[1];
};
-struct mtd_info *sharp_probe(struct map_info *map);
static void sharp_destroy(struct mtd_info *mtd);
static struct mtd_chip_driver sharp_chipdrv = {
@@ -107,7 +106,7 @@
};
-struct mtd_info *sharp_probe(struct map_info *map)
+static struct mtd_info *sharp_probe(struct map_info *map)
{
struct mtd_info *mtd = NULL;
struct sharp_info *sharp = NULL;
@@ -581,7 +580,7 @@
}
-int __init sharp_probe_init(void)
+static int __init sharp_probe_init(void)
{
printk("MTD Sharp chip driver <ds@lineo.com>\n");
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 6b8bb2e..a7a7bfe 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -42,7 +42,8 @@
/* special size referring to all the remaining space in a partition */
-#define SIZE_REMAINING 0xffffffff
+#define SIZE_REMAINING UINT_MAX
+#define OFFSET_CONTINUOUS UINT_MAX
struct cmdline_mtd_partition {
struct cmdline_mtd_partition *next;
@@ -75,7 +76,7 @@
{
struct mtd_partition *parts;
unsigned long size;
- unsigned long offset = 0;
+ unsigned long offset = OFFSET_CONTINUOUS;
char *name;
int name_len;
unsigned char *extra_mem;
@@ -314,7 +315,7 @@
{
for(i = 0, offset = 0; i < part->num_parts; i++)
{
- if (!part->parts[i].offset)
+ if (part->parts[i].offset == OFFSET_CONTINUOUS)
part->parts[i].offset = offset;
else
offset = part->parts[i].offset;
diff --git a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c
index 04f864d..79f2e1f 100644
--- a/drivers/mtd/devices/blkmtd.c
+++ b/drivers/mtd/devices/blkmtd.c
@@ -28,8 +28,9 @@
#include <linux/pagemap.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/mount.h>
#include <linux/mtd/mtd.h>
-
+#include <linux/mutex.h>
#define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg)
@@ -46,7 +47,7 @@
struct list_head list;
struct block_device *blkdev;
struct mtd_info mtd_info;
- struct semaphore wrbuf_mutex;
+ struct mutex wrbuf_mutex;
};
@@ -268,7 +269,7 @@
if(end_len)
pagecnt++;
- down(&dev->wrbuf_mutex);
+ mutex_lock(&dev->wrbuf_mutex);
DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n",
start_len, len, end_len, pagecnt);
@@ -376,7 +377,7 @@
blkmtd_write_out(bio);
DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err);
- up(&dev->wrbuf_mutex);
+ mutex_unlock(&dev->wrbuf_mutex);
if(retlen)
*retlen = thislen;
@@ -614,8 +615,6 @@
}
-extern dev_t __init name_to_dev_t(const char *line);
-
static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size)
{
struct block_device *bdev;
@@ -659,7 +658,7 @@
memset(dev, 0, sizeof(struct blkmtd_dev));
dev->blkdev = bdev;
if(!readonly) {
- init_MUTEX(&dev->wrbuf_mutex);
+ mutex_init(&dev->wrbuf_mutex);
}
dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 7ff403b..4160b83 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/buffer_head.h>
+#include <linux/mutex.h>
#define VERSION "$Revision: 1.30 $"
@@ -31,7 +32,7 @@
struct list_head list;
struct block_device *blkdev;
struct mtd_info mtd;
- struct semaphore write_mutex;
+ struct mutex write_mutex;
};
@@ -134,9 +135,9 @@
int err;
instr->state = MTD_ERASING;
- down(&dev->write_mutex);
+ mutex_lock(&dev->write_mutex);
err = _block2mtd_erase(dev, from, len);
- up(&dev->write_mutex);
+ mutex_unlock(&dev->write_mutex);
if (err) {
ERROR("erase failed err = %d", err);
instr->state = MTD_ERASE_FAILED;
@@ -249,9 +250,9 @@
if (to + len > mtd->size)
len = mtd->size - to;
- down(&dev->write_mutex);
+ mutex_lock(&dev->write_mutex);
err = _block2mtd_write(dev, buf, to, len, retlen);
- up(&dev->write_mutex);
+ mutex_unlock(&dev->write_mutex);
if (err > 0)
err = 0;
return err;
@@ -310,7 +311,7 @@
goto devinit_err;
}
- init_MUTEX(&dev->write_mutex);
+ mutex_init(&dev->write_mutex);
/* Setup the MTD structure */
/* make the name contain the block device in */
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index e4345cf..23e7a5c 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/bitops.h>
+#include <linux/mutex.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -605,7 +606,7 @@
this->curfloor = -1;
this->curchip = -1;
- init_MUTEX(&this->lock);
+ mutex_init(&this->lock);
/* Ident all the chips present. */
DoC_ScanChips(this, maxchips);
@@ -645,7 +646,7 @@
if (from >= this->totlen)
return -EINVAL;
- down(&this->lock);
+ mutex_lock(&this->lock);
*retlen = 0;
while (left) {
@@ -774,7 +775,7 @@
buf += len;
}
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -803,7 +804,7 @@
if (to >= this->totlen)
return -EINVAL;
- down(&this->lock);
+ mutex_lock(&this->lock);
*retlen = 0;
while (left) {
@@ -873,7 +874,7 @@
printk(KERN_ERR "Error programming flash\n");
/* Error in programming */
*retlen = 0;
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EIO;
}
@@ -935,7 +936,7 @@
printk(KERN_ERR "Error programming flash\n");
/* Error in programming */
*retlen = 0;
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EIO;
}
@@ -956,7 +957,7 @@
ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x);
if (ret) {
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
}
@@ -966,7 +967,7 @@
buf += len;
}
- up(&this->lock);
+ mutex_unlock(&this->lock);
return 0;
}
@@ -975,13 +976,13 @@
u_char *eccbuf, struct nand_oobinfo *oobsel)
{
static char static_buf[512];
- static DECLARE_MUTEX(writev_buf_sem);
+ static DEFINE_MUTEX(writev_buf_mutex);
size_t totretlen = 0;
size_t thisvecofs = 0;
int ret= 0;
- down(&writev_buf_sem);
+ mutex_lock(&writev_buf_mutex);
while(count) {
size_t thislen, thisretlen;
@@ -1024,7 +1025,7 @@
to += thislen;
}
- up(&writev_buf_sem);
+ mutex_unlock(&writev_buf_mutex);
*retlen = totretlen;
return ret;
}
@@ -1037,7 +1038,7 @@
int len256 = 0, ret;
struct Nand *mychip;
- down(&this->lock);
+ mutex_lock(&this->lock);
mychip = &this->chips[ofs >> this->chipshift];
@@ -1083,7 +1084,7 @@
ret = DoC_WaitReady(this);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -1197,10 +1198,10 @@
struct DiskOnChip *this = mtd->priv;
int ret;
- down(&this->lock);
+ mutex_lock(&this->lock);
ret = doc_write_oob_nolock(mtd, ofs, len, retlen, buf);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return ret;
}
@@ -1214,10 +1215,10 @@
struct Nand *mychip;
int status;
- down(&this->lock);
+ mutex_lock(&this->lock);
if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) {
- up(&this->lock);
+ mutex_unlock(&this->lock);
return -EINVAL;
}
@@ -1265,7 +1266,7 @@
callback:
mtd_erase_callback(instr);
- up(&this->lock);
+ mutex_unlock(&this->lock);
return 0;
}
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1e876fc..29b0dda 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -581,8 +581,6 @@
/***************************************************************************************************/
-#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
-
static struct mtd_info mtd;
static struct mtd_erase_region_info erase_regions[] = {
@@ -640,7 +638,7 @@
mtd.flags = MTD_CAP_NORFLASH;
mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
- mtd.numeraseregions = NB_OF (erase_regions);
+ mtd.numeraseregions = ARRAY_SIZE(erase_regions);
mtd.eraseregions = erase_regions;
mtd.erase = flash_erase;
mtd.read = flash_read;
@@ -670,9 +668,9 @@
result,mtd.eraseregions[result].numblocks);
#ifdef HAVE_PARTITIONS
- printk ("\npartitions = %d\n",NB_OF (lart_partitions));
+ printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
- for (result = 0; result < NB_OF (lart_partitions); result++)
+ for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
printk (KERN_DEBUG
"\n\n"
"lart_partitions[%d].name = %s\n"
@@ -687,7 +685,7 @@
#ifndef HAVE_PARTITIONS
result = add_mtd_device (&mtd);
#else
- result = add_mtd_partitions (&mtd,lart_partitions,NB_OF (lart_partitions));
+ result = add_mtd_partitions (&mtd,lart_partitions, ARRAY_SIZE(lart_partitions));
#endif
return (result);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index d5f2408..04e65d5 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -186,7 +186,7 @@
struct m25p *flash = mtd_to_m25p(mtd);
u32 addr,len;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
flash->spi->dev.bus_id, __FUNCTION__, "at",
(u32)instr->addr, instr->len);
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 0ff2e43..485f663 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -308,7 +308,7 @@
break;
}
- for (i = 0; i < (sizeof(ms02nv_addrs) / sizeof(*ms02nv_addrs)); i++)
+ for (i = 0; i < ARRAY_SIZE(ms02nv_addrs); i++)
if (!ms02nv_init_one(ms02nv_addrs[i] << stride))
count++;
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 8a54489..a3b9247 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -47,9 +47,6 @@
*/
#define MAX_LOOPS 10000
-extern void INFTL_dumptables(struct INFTLrecord *inftl);
-extern void INFTL_dumpVUchains(struct INFTLrecord *inftl);
-
static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
struct INFTLrecord *inftl;
@@ -132,7 +129,7 @@
return;
}
#ifdef PSYCHO_DEBUG
- printk(KERN_INFO "INFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a');
+ printk(KERN_INFO "INFTL: Found new inftl%c\n", inftl->mbd.devnum + 'a');
#endif
return;
}
@@ -885,8 +882,6 @@
.owner = THIS_MODULE,
};
-extern char inftlmountrev[];
-
static int __init init_inftl(void)
{
printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
index a57791a..b933a2a 100644
--- a/drivers/mtd/maps/alchemy-flash.c
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -126,8 +126,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
static struct mtd_info *mymtd;
int __init alchemy_mtd_init(void)
@@ -154,7 +152,7 @@
* Static partition definition selection
*/
parts = alchemy_partitions;
- nb_parts = NB_OF(alchemy_partitions);
+ nb_parts = ARRAY_SIZE(alchemy_partitions);
alchemy_map.size = window_size;
/*
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 6a8c041..fd0f0d3 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -86,7 +86,7 @@
}
};
-#define PARTITION_COUNT (sizeof(flagadm_parts)/sizeof(struct mtd_partition))
+#define PARTITION_COUNT ARRAY_SIZE(flagadm_parts)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 49d9054..652813c 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -57,7 +57,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(partition_info) / sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#define WINDOW_ADDR 0x10000000
#define WINDOW_SIZE 0x800000
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index efb2216..c299d10 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -300,7 +300,7 @@
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
static struct mtd_info *mymtd;
static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
@@ -345,7 +345,7 @@
},
};
-#define NUM_HIGHLVL_PARTITIONS (sizeof(higlvl_partition_info)/sizeof(partition_info[0]))
+#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info)
static int dnp_adnp_probe(void)
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index b993ac0..2bb3c0f 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -99,7 +99,7 @@
static int __init init_svme182(void)
{
struct mtd_partition *partitions;
- int num_parts = sizeof(svme182_partitions) / sizeof(struct mtd_partition);
+ int num_parts = ARRAY_SIZE(svme182_partitions);
partitions = svme182_partitions;
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 3190948..0667101 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -59,7 +59,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(h720x_partitions)/sizeof(h720x_partitions[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
static int nr_mtd_parts;
static struct mtd_partition *mtd_parts;
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 33060a3..ed21547 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -76,7 +76,7 @@
.size = 0x80000
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#define WINDOW_SIZE 0x00100000
#define WINDOW_ADDR 0x00200000
@@ -88,7 +88,7 @@
.phys = WINDOW_ADDR,
};
-#define NUM_FLASH_BANKS (sizeof(netsc520_map)/sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(netsc520_map)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 632eb2a..54a3102 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -128,8 +128,7 @@
}
};
-#define NUM_AMD_PARTITIONS \
- (sizeof(nettel_amd_partitions)/sizeof(nettel_amd_partitions[0]))
+#define NUM_AMD_PARTITIONS ARRAY_SIZE(nettel_amd_partitions)
/****************************************************************************/
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
index c223514..a21fcd1 100644
--- a/drivers/mtd/maps/ocotea.c
+++ b/drivers/mtd/maps/ocotea.c
@@ -58,8 +58,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
int __init init_ocotea(void)
{
u8 fpga0_reg;
@@ -97,7 +95,7 @@
if (flash) {
flash->owner = THIS_MODULE;
add_mtd_partitions(flash, ocotea_small_partitions,
- NB_OF(ocotea_small_partitions));
+ ARRAY_SIZE(ocotea_small_partitions));
} else {
printk("map probe failed for flash\n");
return -ENXIO;
@@ -118,7 +116,7 @@
if (flash) {
flash->owner = THIS_MODULE;
add_mtd_partitions(flash, ocotea_large_partitions,
- NB_OF(ocotea_large_partitions));
+ ARRAY_SIZE(ocotea_large_partitions));
} else {
printk("map probe failed for flash\n");
return -ENXIO;
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 21822c2..d2ab1ba 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -334,9 +334,6 @@
return 0;
release:
- if (mtd)
- map_destroy(mtd);
-
if (map) {
map->exit(dev, map);
kfree(map);
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index f988c81..8bbc751 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -616,7 +616,7 @@
} else if(mem_type == 2) {
mtd = do_map_probe("map_rom", &dev->pcmcia_map);
} else {
- for(i = 0; i < sizeof(probes) / sizeof(char *); i++) {
+ for(i = 0; i < ARRAY_SIZE(probes); i++) {
DEBUG(1, "Trying %s", probes[i]);
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 5b76ed8..50b1403 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -121,8 +121,7 @@
};
-#define NUM_REDWOOD_FLASH_PARTITIONS \
- (sizeof(redwood_flash_partitions)/sizeof(redwood_flash_partitions[0]))
+#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
static struct mtd_info *redwood_mtd;
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index 225cdd9..350286d 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -66,7 +66,7 @@
}
};
-#define NUM_FLASH_BANKS (sizeof(sbc8240_map) / sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
/*
* The following defines the partition layout of SBC8240 boards.
@@ -125,8 +125,6 @@
}
};
-#define NB_OF(x) (sizeof (x) / sizeof (x[0]))
-
/* trivial struct to describe partition information */
struct mtd_part_def
{
@@ -190,10 +188,10 @@
#ifdef CONFIG_MTD_PARTITIONS
sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = NB_OF(sbc8240_uboot_partitions);
+ sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = NB_OF(sbc8240_fs_partitions);
+ sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
for (i = 0; i < NUM_FLASH_BANKS; i++) {
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index ed92afa..e8c130e 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -107,7 +107,7 @@
},
};
-#define NUM_FLASH_BANKS (sizeof(sc520cdp_map)/sizeof(struct map_info))
+#define NUM_FLASH_BANKS ARRAY_SIZE(sc520cdp_map)
static struct mtd_info *mymtd[NUM_FLASH_BANKS];
static struct mtd_info *merged_mtd;
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 2c91dff..28b8a57 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -70,7 +70,7 @@
.size = 0x80000
},
};
-#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#endif
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 999f4bb..12fe53c 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -49,8 +49,6 @@
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
int __init init_sharpsl(void)
{
struct mtd_partition *parts;
@@ -92,7 +90,7 @@
}
parts = sharpsl_partitions;
- nb_parts = NB_OF(sharpsl_partitions);
+ nb_parts = ARRAY_SIZE(sharpsl_partitions);
printk(KERN_NOTICE "Using %s partision definition\n", part_type);
add_mtd_partitions(mymtd, parts, nb_parts);
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index 4b372bc..a7422c2 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -64,7 +64,7 @@
}
};
-#define NUM_PARTITIONS (sizeof(ts5500_partitions)/sizeof(struct mtd_partition))
+#define NUM_PARTITIONS ARRAY_SIZE(ts5500_partitions)
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 79d9280..f7264dc 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -37,7 +37,7 @@
{ .name = "ROMfs" }
};
-#define NUM_PARTITIONS (sizeof(uclinux_romfs) / sizeof(uclinux_romfs[0]))
+#define NUM_PARTITIONS ARRAY_SIZE(uclinux_romfs)
/****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index e006394..b3e4873 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -182,7 +182,7 @@
}
}
- if (!vmax_mtd[1] && !vmax_mtd[2]) {
+ if (!vmax_mtd[0] && !vmax_mtd[1]) {
iounmap((void *)iomapadr);
return -ENXIO;
}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 840dd66..458d3c8 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -19,12 +19,12 @@
#include <linux/spinlock.h>
#include <linux/hdreg.h>
#include <linux/init.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
static LIST_HEAD(blktrans_majors);
-extern struct semaphore mtd_table_mutex;
+extern struct mutex mtd_table_mutex;
extern struct mtd_info *mtd_table[];
struct mtd_blkcore_priv {
@@ -122,9 +122,9 @@
spin_unlock_irq(rq->queue_lock);
- down(&dev->sem);
+ mutex_lock(&dev->lock);
res = do_blktrans_request(tr, dev, req);
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
spin_lock_irq(rq->queue_lock);
@@ -235,8 +235,8 @@
int last_devnum = -1;
struct gendisk *gd;
- if (!down_trylock(&mtd_table_mutex)) {
- up(&mtd_table_mutex);
+ if (!!mutex_trylock(&mtd_table_mutex)) {
+ mutex_unlock(&mtd_table_mutex);
BUG();
}
@@ -267,7 +267,7 @@
return -EBUSY;
}
- init_MUTEX(&new->sem);
+ mutex_init(&new->lock);
list_add_tail(&new->list, &tr->devs);
added:
if (!tr->writesect)
@@ -313,8 +313,8 @@
int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
{
- if (!down_trylock(&mtd_table_mutex)) {
- up(&mtd_table_mutex);
+ if (!!mutex_trylock(&mtd_table_mutex)) {
+ mutex_unlock(&mtd_table_mutex);
BUG();
}
@@ -378,14 +378,14 @@
memset(tr->blkcore_priv, 0, sizeof(*tr->blkcore_priv));
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
ret = register_blkdev(tr->major, tr->name);
if (ret) {
printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
tr->name, tr->major, ret);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
spin_lock_init(&tr->blkcore_priv->queue_lock);
@@ -396,7 +396,7 @@
if (!tr->blkcore_priv->rq) {
unregister_blkdev(tr->major, tr->name);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return -ENOMEM;
}
@@ -407,7 +407,7 @@
blk_cleanup_queue(tr->blkcore_priv->rq);
unregister_blkdev(tr->major, tr->name);
kfree(tr->blkcore_priv);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -419,7 +419,7 @@
tr->add_mtd(tr, mtd_table[i]);
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 0;
}
@@ -428,7 +428,7 @@
{
struct list_head *this, *next;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
/* Clean up the kernel thread */
tr->blkcore_priv->exiting = 1;
@@ -446,7 +446,7 @@
blk_cleanup_queue(tr->blkcore_priv->rq);
unregister_blkdev(tr->major, tr->name);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
kfree(tr->blkcore_priv);
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index e847566..2cef280 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -19,11 +19,13 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
+#include <linux/mutex.h>
+
static struct mtdblk_dev {
struct mtd_info *mtd;
int count;
- struct semaphore cache_sem;
+ struct mutex cache_mutex;
unsigned char *cache_data;
unsigned long cache_offset;
unsigned int cache_size;
@@ -284,7 +286,7 @@
mtdblk->count = 1;
mtdblk->mtd = mtd;
- init_MUTEX (&mtdblk->cache_sem);
+ mutex_init(&mtdblk->cache_mutex);
mtdblk->cache_state = STATE_EMPTY;
if ((mtdblk->mtd->flags & MTD_CAP_RAM) != MTD_CAP_RAM &&
mtdblk->mtd->erasesize) {
@@ -306,9 +308,9 @@
DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
- down(&mtdblk->cache_sem);
+ mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
- up(&mtdblk->cache_sem);
+ mutex_unlock(&mtdblk->cache_mutex);
if (!--mtdblk->count) {
/* It was the last usage. Free the device */
@@ -327,9 +329,9 @@
{
struct mtdblk_dev *mtdblk = mtdblks[dev->devnum];
- down(&mtdblk->cache_sem);
+ mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
- up(&mtdblk->cache_sem);
+ mutex_unlock(&mtdblk->cache_mutex);
if (mtdblk->mtd->sync)
mtdblk->mtd->sync(mtdblk->mtd);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index dade02a..9905870 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -19,15 +19,13 @@
#include <linux/ioctl.h>
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
-#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
-#endif
#include <linux/mtd/mtd.h>
/* These are exported solely for the purpose of mtd_blkdevs.c. You
should not use them for _anything_ else */
-DECLARE_MUTEX(mtd_table_mutex);
+DEFINE_MUTEX(mtd_table_mutex);
struct mtd_info *mtd_table[MAX_MTD_DEVICES];
EXPORT_SYMBOL_GPL(mtd_table_mutex);
@@ -49,7 +47,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
for (i=0; i < MAX_MTD_DEVICES; i++)
if (!mtd_table[i]) {
@@ -67,7 +65,7 @@
not->add(mtd);
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
/* We _know_ we aren't being removed, because
our caller is still holding us here. So none
of this try_ nonsense, and no bitching about it
@@ -76,7 +74,7 @@
return 0;
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 1;
}
@@ -94,7 +92,7 @@
{
int ret;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
if (mtd_table[mtd->index] != mtd) {
ret = -ENODEV;
@@ -118,7 +116,7 @@
ret = 0;
}
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -135,7 +133,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
list_add(&new->list, &mtd_notifiers);
@@ -145,7 +143,7 @@
if (mtd_table[i])
new->add(mtd_table[i]);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
}
/**
@@ -162,7 +160,7 @@
{
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
module_put(THIS_MODULE);
@@ -171,7 +169,7 @@
old->remove(mtd_table[i]);
list_del(&old->list);
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return 0;
}
@@ -193,7 +191,7 @@
struct mtd_info *ret = NULL;
int i;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
if (num == -1) {
for (i=0; i< MAX_MTD_DEVICES; i++)
@@ -211,7 +209,7 @@
if (ret)
ret->usecount++;
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
return ret;
}
@@ -219,9 +217,9 @@
{
int c;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
c = --mtd->usecount;
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
BUG_ON(c < 0);
module_put(mtd->owner);
@@ -296,10 +294,11 @@
EXPORT_SYMBOL(default_mtd_writev);
EXPORT_SYMBOL(default_mtd_readv);
+#ifdef CONFIG_PROC_FS
+
/*====================================================================*/
/* Support for /proc/mtd */
-#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_mtd;
static inline int mtd_proc_info (char *buf, int i)
@@ -319,7 +318,7 @@
int len, l, i;
off_t begin = 0;
- down(&mtd_table_mutex);
+ mutex_lock(&mtd_table_mutex);
len = sprintf(page, "dev: size erasesize name\n");
for (i=0; i< MAX_MTD_DEVICES; i++) {
@@ -337,38 +336,34 @@
*eof = 1;
done:
- up(&mtd_table_mutex);
+ mutex_unlock(&mtd_table_mutex);
if (off >= len+begin)
return 0;
*start = page + (off-begin);
return ((count < begin+len-off) ? count : begin+len-off);
}
-#endif /* CONFIG_PROC_FS */
-
/*====================================================================*/
/* Init code */
static int __init init_mtd(void)
{
-#ifdef CONFIG_PROC_FS
if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
proc_mtd->read_proc = mtd_read_proc;
-#endif
return 0;
}
static void __exit cleanup_mtd(void)
{
-#ifdef CONFIG_PROC_FS
if (proc_mtd)
remove_proc_entry( "mtd", NULL);
-#endif
}
module_init(init_mtd);
module_exit(cleanup_mtd);
+#endif /* CONFIG_PROC_FS */
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1fc4c13..cfe288a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -178,17 +178,16 @@
Even if you leave this disabled, you can enable BBT writes at module
load time (assuming you build diskonchip as a module) with the module
parameter "inftl_bbt_write=1".
-
- config MTD_NAND_SHARPSL
- bool "Support for NAND Flash on Sharp SL Series (C7xx + others)"
- depends on MTD_NAND && ARCH_PXA
-
- config MTD_NAND_NANDSIM
- bool "Support for NAND Flash Simulator"
- depends on MTD_NAND && MTD_PARTITIONS
+config MTD_NAND_SHARPSL
+ tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ depends on MTD_NAND && ARCH_PXA
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ depends on MTD_NAND && MTD_PARTITIONS
help
The simulator may simulate verious NAND flash chips for the
MTD nand layer.
-
+
endmenu
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 201e136..bde3550 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -55,8 +55,6 @@
.size = MTDPART_SIZ_FULL
}
};
-#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
-
/**
* au_read_byte - read one byte from the chip
@@ -462,7 +460,7 @@
}
/* Register the partitions */
- add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
+ add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info));
return 0;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5d22246..95e96fa 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -80,6 +80,7 @@
#include <linux/mtd/compatmac.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
+#include <linux/leds.h>
#include <asm/io.h>
#ifdef CONFIG_MTD_PARTITIONS
@@ -515,6 +516,8 @@
return nand_isbad_bbt (mtd, ofs, allowbbt);
}
+DEFINE_LED_TRIGGER(nand_led_trigger);
+
/*
* Wait for the ready pin, after a command
* The timeout is catched later.
@@ -524,12 +527,14 @@
struct nand_chip *this = mtd->priv;
unsigned long timeo = jiffies + 2;
+ led_trigger_event(nand_led_trigger, LED_FULL);
/* wait until command is processed or timeout occures */
do {
if (this->dev_ready(mtd))
- return;
+ break;
touch_softlockup_watchdog();
} while (time_before(jiffies, timeo));
+ led_trigger_event(nand_led_trigger, LED_OFF);
}
/**
@@ -817,6 +822,8 @@
else
timeo += (HZ * 20) / 1000;
+ led_trigger_event(nand_led_trigger, LED_FULL);
+
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
ndelay (100);
@@ -840,6 +847,8 @@
}
cond_resched();
}
+ led_trigger_event(nand_led_trigger, LED_OFF);
+
status = (int) this->read_byte(mtd);
return status;
}
@@ -2724,6 +2733,21 @@
EXPORT_SYMBOL_GPL (nand_scan);
EXPORT_SYMBOL_GPL (nand_release);
+
+static int __init nand_base_init(void)
+{
+ led_trigger_register_simple("nand-disk", &nand_led_trigger);
+ return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+ led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
MODULE_LICENSE ("GPL");
MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
MODULE_DESCRIPTION ("Generic NAND flash driver code");
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 8815c8d..c077d2e 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -85,10 +85,6 @@
numslots = (master->erasesize / sizeof(struct fis_image_desc));
for (i = 0; i < numslots; i++) {
- if (buf[i].name[0] == 0xff) {
- i = numslots;
- break;
- }
if (!memcmp(buf[i].name, "FIS directory", 14)) {
/* This is apparently the FIS directory entry for the
* FIS directory itself. The FIS directory size is
@@ -128,7 +124,7 @@
struct fis_list *new_fl, **prev;
if (buf[i].name[0] == 0xff)
- break;
+ continue;
if (!redboot_checksum(&buf[i]))
break;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 70f6389..274b013 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -788,7 +788,7 @@
int options; /* User-settable misc. driver options. */
unsigned int media_override:4, /* Passed-in media type. */
default_media:4, /* Read from the EEPROM/Wn3_Config. */
- full_duplex:1, force_fd:1, autoselect:1,
+ full_duplex:1, autoselect:1,
bus_master:1, /* Vortex can only do a fragment bus-m. */
full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */
flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */
@@ -1633,12 +1633,6 @@
((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
0x100 : 0),
ioaddr + Wn3_MAC_Ctrl);
-
- issue_and_wait(dev, TxReset);
- /*
- * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
- */
- issue_and_wait(dev, RxReset|0x04);
}
static void vortex_check_media(struct net_device *dev, unsigned int init)
@@ -1663,7 +1657,7 @@
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
unsigned int config;
- int i;
+ int i, mii_reg1, mii_reg5;
if (VORTEX_PCI(vp)) {
pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
@@ -1723,14 +1717,23 @@
printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
- netif_carrier_off(dev);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
EL3WINDOW(4);
+ mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
+ mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
+ vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
+
vortex_check_media(dev, 1);
}
else
vortex_set_duplex(dev);
+ issue_and_wait(dev, TxReset);
+ /*
+ * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+ */
+ issue_and_wait(dev, RxReset|0x04);
+
iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
@@ -2083,16 +2086,14 @@
}
if (tx_status & 0x14) vp->stats.tx_fifo_errors++;
if (tx_status & 0x38) vp->stats.tx_aborted_errors++;
+ if (tx_status & 0x08) vp->xstats.tx_max_collisions++;
iowrite8(0, ioaddr + TxStatus);
if (tx_status & 0x30) { /* txJabber or txUnderrun */
do_tx_reset = 1;
- } else if (tx_status & 0x08) { /* maxCollisions */
- vp->xstats.tx_max_collisions++;
- if (vp->drv_flags & MAX_COLLISION_RESET) {
- do_tx_reset = 1;
- reset_mask = 0x0108; /* Reset interface logic, but not download logic */
- }
- } else { /* Merely re-enable the transmitter. */
+ } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */
+ do_tx_reset = 1;
+ reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ } else { /* Merely re-enable the transmitter. */
iowrite16(TxEnable, ioaddr + EL3_CMD);
}
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e20b849..bdaaad8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2313,13 +2313,11 @@
endmenu
-if !UML
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
source "drivers/net/pcmcia/Kconfig"
-endif
source "drivers/net/wan/Kconfig"
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index edd1b53..75b35ad 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -94,7 +94,7 @@
static int option_setup(char *opt)
{
configured = !netpoll_parse_options(&np, opt);
- return 0;
+ return 1;
}
__setup("netconsole=", option_setup);
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index eed4968..e8f849e 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1973,7 +1973,7 @@
MAYBE_SET(lockup_hack, 6);
#undef MAYBE_SET
- return 0;
+ return 1;
}
__setup("xirc2ps_cs=", setup_xirc2ps_cs);
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index e4cfc80..99c4c19 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -3,7 +3,7 @@
#
menu "Token Ring devices"
- depends on NETDEVICES
+ depends on NETDEVICES && !UML
# So far, we only have PCI, ISA, and MCA token ring devices
config TR
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index f85e301..bad09eb 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -356,7 +356,7 @@
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on NET_RADIO
+ depends on NET_RADIO && (PCI || PCMCIA)
select FW_LOADER
select CRC32
---help---
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 0574efd..459e6e1 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -634,7 +634,7 @@
static int __devinit vrc4171_card_setup(char *options)
{
if (options == NULL || *options == '\0')
- return 0;
+ return 1;
if (strncmp(options, "irq:", 4) == 0) {
int irq;
@@ -644,7 +644,7 @@
vrc4171_irq = irq;
if (*options != ',')
- return 0;
+ return 1;
options++;
}
@@ -663,10 +663,10 @@
}
if (*options != ',')
- return 0;
+ return 1;
options++;
} else
- return 0;
+ return 1;
}
@@ -688,7 +688,7 @@
}
if (*options != ',')
- return 0;
+ return 1;
options++;
if (strncmp(options, "memnoprobe", 10) == 0)
@@ -700,7 +700,7 @@
}
}
- return 0;
+ return 1;
}
__setup("vrc4171_card=", vrc4171_card_setup);
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 57f38db..6004196 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -516,7 +516,7 @@
static int __devinit vrc4173_cardu_setup(char *options)
{
if (options == NULL || *options == '\0')
- return 0;
+ return 1;
if (strncmp(options, "cardu1:", 7) == 0) {
options += 7;
@@ -527,9 +527,9 @@
}
if (*options != ',')
- return 0;
+ return 1;
} else
- return 0;
+ return 1;
}
if (strncmp(options, "cardu2:", 7) == 0) {
@@ -538,7 +538,7 @@
cardu_sockets[CARDU2].noprobe = 1;
}
- return 0;
+ return 1;
}
__setup("vrc4173_cardu=", vrc4173_cardu_setup);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index ffba656..1bd82c4 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -293,6 +293,10 @@
board_ahci }, /* JMicron JMB360 */
{ 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* JMicron JMB363 */
+ { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ATI SB600 non-raid */
+ { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ATI SB600 raid */
{ } /* terminate list */
};
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 2d5be84..24e71b5 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -301,7 +301,7 @@
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
- { P0, P1, P2, P3 }, /* 00b */
+ { P0, P2, P1, P3 }, /* 00b */
{ IDE, IDE, P1, P3 }, /* 01b */
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
@@ -312,7 +312,7 @@
.mask = 0x3,
.map = {
/* PM PS SM SS MAP */
- { P0, P1, P2, P3 }, /* 00b */
+ { P0, P2, RV, RV }, /* 00b */
{ RV, RV, RV, RV },
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 3a8462e..24eb59e 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -2488,7 +2488,7 @@
}
ints[0] = i - 1;
internal_ibmmca_scsi_setup(cur, ints);
- return 0;
+ return 1;
}
__setup("ibmmcascsi=", option_setup);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 21b0ed5..e63c1ff 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -278,7 +278,7 @@
}
static const struct ata_xfer_ent {
- unsigned int shift, bits;
+ int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
{ ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
@@ -989,9 +989,7 @@
qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
@@ -3997,15 +3995,14 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
*/
-
-unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
+void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ qc->ap->active_tag = qc->tag;
+ qc->flags |= ATA_QCFLAG_ACTIVE;
+
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
@@ -4020,17 +4017,18 @@
ap->ops->qc_prep(qc);
- qc->ap->active_tag = qc->tag;
- qc->flags |= ATA_QCFLAG_ACTIVE;
-
- return ap->ops->qc_issue(qc);
+ qc->err_mask |= ap->ops->qc_issue(qc);
+ if (unlikely(qc->err_mask))
+ goto err;
+ return;
sg_err:
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- return AC_ERR_SYSTEM;
+ qc->err_mask |= AC_ERR_SYSTEM;
+err:
+ ata_qc_complete(qc);
}
-
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 628191b..53f5b0d 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1431,9 +1431,7 @@
goto early_finish;
/* select device, send command to hardware */
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
VPRINTK("EXIT\n");
return;
@@ -2199,9 +2197,7 @@
qc->complete_fn = atapi_sense_complete;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
DPRINTK("EXIT\n");
}
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 65f52be..1c755b1 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -47,7 +47,7 @@
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_port_flush_task(struct ata_port *ap);
extern void ata_qc_free(struct ata_queued_cmd *qc);
-extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc);
+extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 4d48b62..7d82370 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -142,12 +142,14 @@
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct termios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- if (ch == port->info->tty->termios->c_cc[VSTART])
+ termios = port->info->tty->termios;
+ if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
- if (ch == port->info->tty->termios->c_cc[VSTOP])
+ if (ch == termios->c_cc[VSTOP])
channel->ch_bd->bd_ops->send_stop_character(channel);
spin_unlock_irqrestore(&port->lock, lock_flags);
}
@@ -178,6 +180,7 @@
struct jsm_board *brd;
int rc = 0;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct termios *termios;
/* Get board pointer from our array of majors we have allocated */
brd = channel->ch_bd;
@@ -239,12 +242,13 @@
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- channel->ch_c_cflag = port->info->tty->termios->c_cflag;
- channel->ch_c_iflag = port->info->tty->termios->c_iflag;
- channel->ch_c_oflag = port->info->tty->termios->c_oflag;
- channel->ch_c_lflag = port->info->tty->termios->c_lflag;
- channel->ch_startc = port->info->tty->termios->c_cc[VSTART];
- channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+ termios = port->info->tty->termios;
+ channel->ch_c_cflag = termios->c_cflag;
+ channel->ch_c_iflag = termios->c_iflag;
+ channel->ch_c_oflag = termios->c_oflag;
+ channel->ch_c_lflag = termios->c_lflag;
+ channel->ch_startc = termios->c_cc[VSTART];
+ channel->ch_stopc = termios->c_cc[VSTOP];
/* Tell UART to init itself */
brd->bd_ops->uart_init(channel);
@@ -784,6 +788,7 @@
void jsm_check_queue_flow_control(struct jsm_channel *ch)
{
+ struct board_ops *bd_ops = ch->ch_bd->bd_ops;
int qleft = 0;
/* Store how much space we have left in the queue */
@@ -809,7 +814,7 @@
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
- ch->ch_bd->bd_ops->disable_receiver(ch);
+ bd_ops->disable_receiver(ch);
ch->ch_flags |= (CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
@@ -819,7 +824,7 @@
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF) {
if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
- ch->ch_bd->bd_ops->send_stop_character(ch);
+ bd_ops->send_stop_character(ch);
ch->ch_stops_sent++;
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
@@ -846,7 +851,7 @@
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if (ch->ch_flags & CH_RECEIVER_OFF) {
- ch->ch_bd->bd_ops->enable_receiver(ch);
+ bd_ops->enable_receiver(ch);
ch->ch_flags &= ~(CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
@@ -856,7 +861,7 @@
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
ch->ch_stops_sent = 0;
- ch->ch_bd->bd_ops->send_start_character(ch);
+ bd_ops->send_start_character(ch);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
}
}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 22e9d69..f87c017 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -904,18 +904,6 @@
There is no need for enabling 'Matrox multihead support' if you have
only one Matrox card in the box.
-config FB_RADEON_OLD
- tristate "ATI Radeon display support (Old driver)"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_MACMODES if PPC
- help
- Choose this option if you want to use an ATI Radeon graphics card as
- a framebuffer device. There are both PCI and AGP versions. You
- don't need to choose this to run the Radeon in plain VGA mode.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index cb90218..23de3b2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -39,7 +39,6 @@
obj-$(CONFIG_FB_SAVAGE) += savage/
obj-$(CONFIG_FB_GEODE) += geode/
obj-$(CONFIG_FB_I810) += vgastate.o
-obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
obj-$(CONFIG_FB_VIRGE) += virgefb.o
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 9d996f2..b895eaa 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -43,11 +43,11 @@
default y
config BACKLIGHT_CORGI
- tristate "Sharp Corgi Backlight Driver (SL-C7xx Series)"
+ tristate "Sharp Corgi Backlight Driver (SL Series)"
depends on BACKLIGHT_DEVICE && PXA_SHARPSL
default y
help
- If you have a Sharp Zaurus SL-C7xx, say y to enable the
+ If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
backlight driver.
config BACKLIGHT_HP680
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 151fda8..334b1db 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -16,14 +16,12 @@
static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
- if (likely(bd->props && bd->props->get_power))
- rc = sprintf(buf, "%d\n", bd->props->get_power(bd));
- else
- rc = -ENXIO;
+ if (likely(bd->props))
+ rc = sprintf(buf, "%d\n", bd->props->power);
up(&bd->sem);
return rc;
@@ -31,7 +29,7 @@
static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, power;
+ int rc = -ENXIO, power;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
@@ -40,12 +38,13 @@
return -EINVAL;
down(&bd->sem);
- if (likely(bd->props && bd->props->set_power)) {
+ if (likely(bd->props)) {
pr_debug("backlight: set power to %d\n", power);
- bd->props->set_power(bd, power);
+ bd->props->power = power;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
rc = count;
- } else
- rc = -ENXIO;
+ }
up(&bd->sem);
return rc;
@@ -53,14 +52,12 @@
static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
- if (likely(bd->props && bd->props->get_brightness))
- rc = sprintf(buf, "%d\n", bd->props->get_brightness(bd));
- else
- rc = -ENXIO;
+ if (likely(bd->props))
+ rc = sprintf(buf, "%d\n", bd->props->brightness);
up(&bd->sem);
return rc;
@@ -68,7 +65,7 @@
static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
{
- int rc, brightness;
+ int rc = -ENXIO, brightness;
char *endp;
struct backlight_device *bd = to_backlight_device(cdev);
@@ -77,12 +74,18 @@
return -EINVAL;
down(&bd->sem);
- if (likely(bd->props && bd->props->set_brightness)) {
- pr_debug("backlight: set brightness to %d\n", brightness);
- bd->props->set_brightness(bd, brightness);
- rc = count;
- } else
- rc = -ENXIO;
+ if (likely(bd->props)) {
+ if (brightness > bd->props->max_brightness)
+ rc = -EINVAL;
+ else {
+ pr_debug("backlight: set brightness to %d\n",
+ brightness);
+ bd->props->brightness = brightness;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
+ rc = count;
+ }
+ }
up(&bd->sem);
return rc;
@@ -90,14 +93,26 @@
static ssize_t backlight_show_max_brightness(struct class_device *cdev, char *buf)
{
- int rc;
+ int rc = -ENXIO;
struct backlight_device *bd = to_backlight_device(cdev);
down(&bd->sem);
if (likely(bd->props))
rc = sprintf(buf, "%d\n", bd->props->max_brightness);
- else
- rc = -ENXIO;
+ up(&bd->sem);
+
+ return rc;
+}
+
+static ssize_t backlight_show_actual_brightness(struct class_device *cdev,
+ char *buf)
+{
+ int rc = -ENXIO;
+ struct backlight_device *bd = to_backlight_device(cdev);
+
+ down(&bd->sem);
+ if (likely(bd->props && bd->props->get_brightness))
+ rc = sprintf(buf, "%d\n", bd->props->get_brightness(bd));
up(&bd->sem);
return rc;
@@ -123,7 +138,10 @@
static struct class_device_attribute bl_class_device_attributes[] = {
DECLARE_ATTR(power, 0644, backlight_show_power, backlight_store_power),
- DECLARE_ATTR(brightness, 0644, backlight_show_brightness, backlight_store_brightness),
+ DECLARE_ATTR(brightness, 0644, backlight_show_brightness,
+ backlight_store_brightness),
+ DECLARE_ATTR(actual_brightness, 0444, backlight_show_actual_brightness,
+ NULL),
DECLARE_ATTR(max_brightness, 0444, backlight_show_max_brightness, NULL),
};
@@ -144,8 +162,12 @@
bd = container_of(self, struct backlight_device, fb_notif);
down(&bd->sem);
if (bd->props)
- if (!bd->props->check_fb || bd->props->check_fb(evdata->info))
- bd->props->set_power(bd, *(int *)evdata->data);
+ if (!bd->props->check_fb ||
+ bd->props->check_fb(evdata->info)) {
+ bd->props->fb_blank = *(int *)evdata->data;
+ if (likely(bd->props && bd->props->update_status))
+ bd->props->update_status(bd);
+ }
up(&bd->sem);
return 0;
}
@@ -231,6 +253,12 @@
&bl_class_device_attributes[i]);
down(&bd->sem);
+ if (likely(bd->props && bd->props->update_status)) {
+ bd->props->brightness = 0;
+ bd->props->power = 0;
+ bd->props->update_status(bd);
+ }
+
bd->props = NULL;
up(&bd->sem);
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index d0aaf45..2ebbfd9 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -1,7 +1,7 @@
/*
- * Backlight Driver for Sharp Corgi
+ * Backlight Driver for Sharp Zaurus Handhelds (various models)
*
- * Copyright (c) 2004-2005 Richard Purdie
+ * Copyright (c) 2004-2006 Richard Purdie
*
* Based on Sharp's 2.4 Backlight Driver
*
@@ -15,80 +15,63 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
-
#include <asm/arch/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
-#define CORGI_DEFAULT_INTENSITY 0x1f
-#define CORGI_LIMIT_MASK 0x0b
-
-static int corgibl_powermode = FB_BLANK_UNBLANK;
-static int current_intensity = 0;
-static int corgibl_limit = 0;
-static void (*corgibl_mach_set_intensity)(int intensity);
-static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+static int corgibl_intensity;
+static DEFINE_MUTEX(bl_mutex);
static struct backlight_properties corgibl_data;
+static struct backlight_device *corgi_backlight_device;
+static struct corgibl_machinfo *bl_machinfo;
-static void corgibl_send_intensity(int intensity)
+static unsigned long corgibl_flags;
+#define CORGIBL_SUSPENDED 0x01
+#define CORGIBL_BATTLOW 0x02
+
+static int corgibl_send_intensity(struct backlight_device *bd)
{
- unsigned long flags;
void (*corgi_kick_batt)(void);
+ int intensity = bd->props->brightness;
- if (corgibl_powermode != FB_BLANK_UNBLANK) {
+ if (bd->props->power != FB_BLANK_UNBLANK)
intensity = 0;
- } else {
- if (corgibl_limit)
- intensity &= CORGI_LIMIT_MASK;
- }
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_SUSPENDED)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_BATTLOW)
+ intensity &= bl_machinfo->limit_mask;
- spin_lock_irqsave(&bl_lock, flags);
+ mutex_lock(&bl_mutex);
+ bl_machinfo->set_bl_intensity(intensity);
+ mutex_unlock(&bl_mutex);
- corgibl_mach_set_intensity(intensity);
-
- spin_unlock_irqrestore(&bl_lock, flags);
+ corgibl_intensity = intensity;
corgi_kick_batt = symbol_get(sharpsl_battery_kick);
if (corgi_kick_batt) {
corgi_kick_batt();
symbol_put(sharpsl_battery_kick);
}
-}
-static void corgibl_blank(int blank)
-{
- switch(blank) {
-
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- if (corgibl_powermode == FB_BLANK_UNBLANK) {
- corgibl_send_intensity(0);
- corgibl_powermode = blank;
- }
- break;
- case FB_BLANK_UNBLANK:
- if (corgibl_powermode != FB_BLANK_UNBLANK) {
- corgibl_powermode = blank;
- corgibl_send_intensity(current_intensity);
- }
- break;
- }
+ return 0;
}
#ifdef CONFIG_PM
static int corgibl_suspend(struct platform_device *dev, pm_message_t state)
{
- corgibl_blank(FB_BLANK_POWERDOWN);
+ corgibl_flags |= CORGIBL_SUSPENDED;
+ corgibl_send_intensity(corgi_backlight_device);
return 0;
}
static int corgibl_resume(struct platform_device *dev)
{
- corgibl_blank(FB_BLANK_UNBLANK);
+ corgibl_flags &= ~CORGIBL_SUSPENDED;
+ corgibl_send_intensity(corgi_backlight_device);
return 0;
}
#else
@@ -96,30 +79,15 @@
#define corgibl_resume NULL
#endif
-
-static int corgibl_set_power(struct backlight_device *bd, int state)
-{
- corgibl_blank(state);
- return 0;
-}
-
-static int corgibl_get_power(struct backlight_device *bd)
-{
- return corgibl_powermode;
-}
-
-static int corgibl_set_intensity(struct backlight_device *bd, int intensity)
-{
- if (intensity > corgibl_data.max_brightness)
- intensity = corgibl_data.max_brightness;
- corgibl_send_intensity(intensity);
- current_intensity=intensity;
- return 0;
-}
-
static int corgibl_get_intensity(struct backlight_device *bd)
{
- return current_intensity;
+ return corgibl_intensity;
+}
+
+static int corgibl_set_intensity(struct backlight_device *bd)
+{
+ corgibl_send_intensity(corgi_backlight_device);
+ return 0;
}
/*
@@ -128,36 +96,38 @@
*/
void corgibl_limit_intensity(int limit)
{
- corgibl_limit = (limit ? 1 : 0);
- corgibl_send_intensity(current_intensity);
+ if (limit)
+ corgibl_flags |= CORGIBL_BATTLOW;
+ else
+ corgibl_flags &= ~CORGIBL_BATTLOW;
+ corgibl_send_intensity(corgi_backlight_device);
}
EXPORT_SYMBOL(corgibl_limit_intensity);
static struct backlight_properties corgibl_data = {
- .owner = THIS_MODULE,
- .get_power = corgibl_get_power,
- .set_power = corgibl_set_power,
+ .owner = THIS_MODULE,
.get_brightness = corgibl_get_intensity,
- .set_brightness = corgibl_set_intensity,
+ .update_status = corgibl_set_intensity,
};
-static struct backlight_device *corgi_backlight_device;
-
static int __init corgibl_probe(struct platform_device *pdev)
{
struct corgibl_machinfo *machinfo = pdev->dev.platform_data;
+ bl_machinfo = machinfo;
corgibl_data.max_brightness = machinfo->max_intensity;
- corgibl_mach_set_intensity = machinfo->set_bl_intensity;
+ if (!machinfo->limit_mask)
+ machinfo->limit_mask = -1;
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
- corgibl_set_intensity(NULL, CORGI_DEFAULT_INTENSITY);
- corgibl_limit_intensity(0);
+ corgibl_data.power = FB_BLANK_UNBLANK;
+ corgibl_data.brightness = machinfo->default_intensity;
+ corgibl_send_intensity(corgi_backlight_device);
printk("Corgi Backlight Driver Initialized.\n");
return 0;
@@ -167,8 +137,6 @@
{
backlight_device_unregister(corgi_backlight_device);
- corgibl_set_intensity(NULL, 0);
-
printk("Corgi Backlight Driver Unloaded\n");
return 0;
}
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 95da4c9..a71e984 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/backlight.h>
@@ -25,66 +25,58 @@
#define HP680_MAX_INTENSITY 255
#define HP680_DEFAULT_INTENSITY 10
-static int hp680bl_powermode = FB_BLANK_UNBLANK;
+static int hp680bl_suspended;
static int current_intensity = 0;
static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+static struct backlight_device *hp680_backlight_device;
-static void hp680bl_send_intensity(int intensity)
+static void hp680bl_send_intensity(struct backlight_device *bd)
{
unsigned long flags;
+ u16 v;
+ int intensity = bd->props->brightness;
- if (hp680bl_powermode != FB_BLANK_UNBLANK)
+ if (bd->props->power != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (hp680bl_suspended)
intensity = 0;
spin_lock_irqsave(&bl_lock, flags);
- sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
- spin_unlock_irqrestore(&bl_lock, flags);
-}
-
-static void hp680bl_blank(int blank)
-{
- u16 v;
-
- switch(blank) {
-
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- if (hp680bl_powermode == FB_BLANK_UNBLANK) {
- hp680bl_send_intensity(0);
- hp680bl_powermode = blank;
- sh_dac_disable(DAC_LCD_BRIGHTNESS);
- v = inw(HD64461_GPBDR);
- v |= HD64461_GPBDR_LCDOFF;
- outw(v, HD64461_GPBDR);
- }
- break;
- case FB_BLANK_UNBLANK:
- if (hp680bl_powermode != FB_BLANK_UNBLANK) {
- sh_dac_enable(DAC_LCD_BRIGHTNESS);
- v = inw(HD64461_GPBDR);
- v &= ~HD64461_GPBDR_LCDOFF;
- outw(v, HD64461_GPBDR);
- hp680bl_powermode = blank;
- hp680bl_send_intensity(current_intensity);
- }
- break;
+ if (intensity && current_intensity == 0) {
+ sh_dac_enable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v &= ~HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
+ } else if (intensity == 0 && current_intensity != 0) {
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
+ sh_dac_disable(DAC_LCD_BRIGHTNESS);
+ v = inw(HD64461_GPBDR);
+ v |= HD64461_GPBDR_LCDOFF;
+ outw(v, HD64461_GPBDR);
+ } else if (intensity) {
+ sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS);
}
+ spin_unlock_irqrestore(&bl_lock, flags);
+
+ current_intensity = intensity;
}
+
#ifdef CONFIG_PM
-static int hp680bl_suspend(struct device *dev, pm_message_t state, u32 level)
+static int hp680bl_suspend(struct platform_device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN)
- hp680bl_blank(FB_BLANK_POWERDOWN);
+ hp680bl_suspended = 1;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
-static int hp680bl_resume(struct device *dev, u32 level)
+static int hp680bl_resume(struct platform_device *dev)
{
- if (level == RESUME_POWER_ON)
- hp680bl_blank(FB_BLANK_UNBLANK);
+ hp680bl_suspended = 0;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
#else
@@ -92,24 +84,9 @@
#define hp680bl_resume NULL
#endif
-
-static int hp680bl_set_power(struct backlight_device *bd, int state)
+static int hp680bl_set_intensity(struct backlight_device *bd)
{
- hp680bl_blank(state);
- return 0;
-}
-
-static int hp680bl_get_power(struct backlight_device *bd)
-{
- return hp680bl_powermode;
-}
-
-static int hp680bl_set_intensity(struct backlight_device *bd, int intensity)
-{
- if (intensity > HP680_MAX_INTENSITY)
- intensity = HP680_MAX_INTENSITY;
- hp680bl_send_intensity(intensity);
- current_intensity = intensity;
+ hp680bl_send_intensity(bd);
return 0;
}
@@ -120,65 +97,67 @@
static struct backlight_properties hp680bl_data = {
.owner = THIS_MODULE,
- .get_power = hp680bl_get_power,
- .set_power = hp680bl_set_power,
.max_brightness = HP680_MAX_INTENSITY,
.get_brightness = hp680bl_get_intensity,
- .set_brightness = hp680bl_set_intensity,
+ .update_status = hp680bl_set_intensity,
};
-static struct backlight_device *hp680_backlight_device;
-
-static int __init hp680bl_probe(struct device *dev)
+static int __init hp680bl_probe(struct platform_device *dev)
{
hp680_backlight_device = backlight_device_register ("hp680-bl",
NULL, &hp680bl_data);
if (IS_ERR (hp680_backlight_device))
return PTR_ERR (hp680_backlight_device);
- hp680bl_set_intensity(NULL, HP680_DEFAULT_INTENSITY);
+ hp680_backlight_device->props->brightness = HP680_DEFAULT_INTENSITY;
+ hp680bl_send_intensity(hp680_backlight_device);
return 0;
}
-static int hp680bl_remove(struct device *dev)
+static int hp680bl_remove(struct platform_device *dev)
{
backlight_device_unregister(hp680_backlight_device);
return 0;
}
-static struct device_driver hp680bl_driver = {
- .name = "hp680-bl",
- .bus = &platform_bus_type,
+static struct platform_driver hp680bl_driver = {
.probe = hp680bl_probe,
.remove = hp680bl_remove,
.suspend = hp680bl_suspend,
.resume = hp680bl_resume,
+ .driver = {
+ .name = "hp680-bl",
+ },
};
-static struct platform_device hp680bl_device = {
- .name = "hp680-bl",
- .id = -1,
-};
+static struct platform_device *hp680bl_device;
static int __init hp680bl_init(void)
{
int ret;
- ret=driver_register(&hp680bl_driver);
+ ret = platform_driver_register(&hp680bl_driver);
if (!ret) {
- ret = platform_device_register(&hp680bl_device);
- if (ret)
- driver_unregister(&hp680bl_driver);
+ hp680bl_device = platform_device_alloc("hp680-bl", -1);
+ if (!hp680bl_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(hp680bl_device);
+
+ if (ret) {
+ platform_device_put(hp680bl_device);
+ platform_driver_unregister(&hp680bl_driver);
+ }
}
return ret;
}
static void __exit hp680bl_exit(void)
{
- platform_device_unregister(&hp680bl_device);
- driver_unregister(&hp680bl_driver);
+ platform_device_unregister(hp680bl_device);
+ platform_driver_unregister(&hp680bl_driver);
}
module_init(hp680bl_init);
diff --git a/drivers/video/cfbimgblt.c b/drivers/video/cfbimgblt.c
index 910e233..8ba6152 100644
--- a/drivers/video/cfbimgblt.c
+++ b/drivers/video/cfbimgblt.c
@@ -169,7 +169,7 @@
while (j--) {
l--;
- color = (*s & 1 << (FB_BIT_NR(l))) ? fgcolor : bgcolor;
+ color = (*s & (1 << l)) ? fgcolor : bgcolor;
val |= FB_SHIFT_HIGH(color, shift);
/* Did the bitshift spill bits to the next long? */
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 041d069..ca020719 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -466,7 +466,7 @@
int i, j;
if (!this_opt || !*this_opt)
- return 0;
+ return 1;
while ((options = strsep(&this_opt, ",")) != NULL) {
if (!strncmp(options, "font:", 5))
@@ -481,10 +481,10 @@
options++;
}
if (*options != ',')
- return 0;
+ return 1;
options++;
} else
- return 0;
+ return 1;
}
if (!strncmp(options, "map:", 4)) {
@@ -496,7 +496,7 @@
con2fb_map_boot[i] =
(options[j++]-'0') % FB_MAX;
}
- return 0;
+ return 1;
}
if (!strncmp(options, "vc:", 3)) {
@@ -518,7 +518,7 @@
rotate = 0;
}
}
- return 0;
+ return 1;
}
__setup("fbcon=", fb_console_setup);
@@ -1142,6 +1142,7 @@
set_blitting_type(vc, info);
}
+ ops->p = &fb_display[fg_console];
}
static void fbcon_deinit(struct vc_data *vc)
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d6041e7..74ac2ac 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -275,7 +275,7 @@
if (str)
strlcpy (default_sti_path, str, sizeof (default_sti_path));
- return 0;
+ return 1;
}
/* Assuming the machine has multiple STI consoles (=graphic cards) which
@@ -321,7 +321,7 @@
i++;
}
- return 0;
+ return 1;
}
/* The optional linux kernel parameter "sti_font" defines which font
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index b1a8dca..944855b 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1588,7 +1588,7 @@
}
}
- return 0;
+ return 1;
}
__setup("video=", video_setup);
#endif
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 53ad61f..809fc5e 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -232,9 +232,9 @@
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
+ return -EINVAL;
if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
+ return -EINVAL;
var->xres_virtual =
max(var->xres_virtual, var->xres);
var->yres_virtual =
@@ -781,7 +781,7 @@
LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
- schedule_timeout(20 * HZ / 1000);
+ schedule_timeout(200 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
/* disable LCD controller clock */
@@ -1274,7 +1274,7 @@
struct pxafb_mach_info *inf;
int ret;
- dev_dbg(dev, "pxafb_probe\n");
+ dev_dbg(&dev->dev, "pxafb_probe\n");
inf = dev->dev.platform_data;
ret = -ENOMEM;
diff --git a/drivers/video/radeonfb.c b/drivers/video/radeonfb.c
deleted file mode 100644
index afb6c2e..0000000
--- a/drivers/video/radeonfb.c
+++ /dev/null
@@ -1,3167 +0,0 @@
-/*
- * drivers/video/radeonfb.c
- * framebuffer driver for ATI Radeon chipset video boards
- *
- * Copyright 2000 Ani Joshi <ajoshi@kernel.crashing.org>
- *
- *
- * ChangeLog:
- * 2000-08-03 initial version 0.0.1
- * 2000-09-10 more bug fixes, public release 0.0.5
- * 2001-02-19 mode bug fixes, 0.0.7
- * 2001-07-05 fixed scrolling issues, engine initialization,
- * and minor mode tweaking, 0.0.9
- * 2001-09-07 Radeon VE support, Nick Kurshev
- * blanking, pan_display, and cmap fixes, 0.1.0
- * 2001-10-10 Radeon 7500 and 8500 support, and experimental
- * flat panel support, 0.1.1
- * 2001-11-17 Radeon M6 (ppc) support, Daniel Berlin, 0.1.2
- * 2001-11-18 DFP fixes, Kevin Hendricks, 0.1.3
- * 2001-11-29 more cmap, backlight fixes, Benjamin Herrenschmidt
- * 2002-01-18 DFP panel detection via BIOS, Michael Clark, 0.1.4
- * 2002-06-02 console switching, mode set fixes, accel fixes
- * 2002-06-03 MTRR support, Peter Horton, 0.1.5
- * 2002-09-21 rv250, r300, m9 initial support,
- * added mirror option, 0.1.6
- *
- * Special thanks to ATI DevRel team for their hardware donations.
- *
- */
-
-
-#define RADEON_VERSION "0.1.6"
-
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#if defined(__powerpc__)
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include "macmodes.h"
-
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-#include <asm/backlight.h>
-#endif
-
-#ifdef CONFIG_BOOTX_TEXT
-#include <asm/btext.h>
-#endif
-
-#ifdef CONFIG_ADB_PMU
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#endif
-
-#endif /* __powerpc__ */
-
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
-
-#include <video/radeon.h>
-#include <linux/radeonfb.h>
-
-#define DEBUG 0
-
-#if DEBUG
-#define RTRACE printk
-#else
-#define RTRACE if(0) printk
-#endif
-
-// XXX
-#undef CONFIG_PMAC_PBOOK
-
-
-enum radeon_chips {
- RADEON_QD,
- RADEON_QE,
- RADEON_QF,
- RADEON_QG,
- RADEON_QY,
- RADEON_QZ,
- RADEON_LW,
- RADEON_LX,
- RADEON_LY,
- RADEON_LZ,
- RADEON_QL,
- RADEON_QN,
- RADEON_QO,
- RADEON_Ql,
- RADEON_BB,
- RADEON_QW,
- RADEON_QX,
- RADEON_Id,
- RADEON_Ie,
- RADEON_If,
- RADEON_Ig,
- RADEON_Ya,
- RADEON_Yd,
- RADEON_Ld,
- RADEON_Le,
- RADEON_Lf,
- RADEON_Lg,
- RADEON_ND,
- RADEON_NE,
- RADEON_NF,
- RADEON_NG,
- RADEON_QM
-};
-
-enum radeon_arch {
- RADEON_R100,
- RADEON_RV100,
- RADEON_R200,
- RADEON_RV200,
- RADEON_RV250,
- RADEON_R300,
- RADEON_M6,
- RADEON_M7,
- RADEON_M9
-};
-
-static struct radeon_chip_info {
- const char *name;
- unsigned char arch;
-} radeon_chip_info[] __devinitdata = {
- { "QD", RADEON_R100 },
- { "QE", RADEON_R100 },
- { "QF", RADEON_R100 },
- { "QG", RADEON_R100 },
- { "VE QY", RADEON_RV100 },
- { "VE QZ", RADEON_RV100 },
- { "M7 LW", RADEON_M7 },
- { "M7 LX", RADEON_M7 },
- { "M6 LY", RADEON_M6 },
- { "M6 LZ", RADEON_M6 },
- { "8500 QL", RADEON_R200 },
- { "8500 QN", RADEON_R200 },
- { "8500 QO", RADEON_R200 },
- { "8500 Ql", RADEON_R200 },
- { "8500 BB", RADEON_R200 },
- { "7500 QW", RADEON_RV200 },
- { "7500 QX", RADEON_RV200 },
- { "9000 Id", RADEON_RV250 },
- { "9000 Ie", RADEON_RV250 },
- { "9000 If", RADEON_RV250 },
- { "9000 Ig", RADEON_RV250 },
- { "M9 Ld", RADEON_M9 },
- { "M9 Le", RADEON_M9 },
- { "M9 Lf", RADEON_M9 },
- { "M9 Lg", RADEON_M9 },
- { "9700 ND", RADEON_R300 },
- { "9700 NE", RADEON_R300 },
- { "9700 NF", RADEON_R300 },
- { "9700 NG", RADEON_R300 },
- { "9100 QM", RADEON_R200 }
-};
-
-
-enum radeon_montype
-{
- MT_NONE,
- MT_CRT, /* CRT */
- MT_LCD, /* LCD */
- MT_DFP, /* DVI */
- MT_CTV, /* composite TV */
- MT_STV /* S-Video out */
-};
-
-
-static struct pci_device_id radeonfb_pci_table[] = {
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QD},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QE},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QF},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QG},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QY},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QZ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QZ},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LW, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LW},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LX},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LY, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LY},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_LZ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_LZ},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QL},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QN, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QN},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QO},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ql, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ql},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_BB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_BB},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QW, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QW},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QX},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Id},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ie, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ie},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_If, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_If},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ig, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ig},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ya, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ya},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Yd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Yd},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ld, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ld},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Le, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Le},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Lf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Lf},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Lg, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Lg},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_ND, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_ND},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NE},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NF},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_NG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_NG},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_QM},
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, radeonfb_pci_table);
-
-
-typedef struct {
- u16 reg;
- u32 val;
-} reg_val;
-
-
-/* these common regs are cleared before mode setting so they do not
- * interfere with anything
- */
-static reg_val common_regs[] = {
- { OVR_CLR, 0 },
- { OVR_WID_LEFT_RIGHT, 0 },
- { OVR_WID_TOP_BOTTOM, 0 },
- { OV0_SCALE_CNTL, 0 },
- { SUBPIC_CNTL, 0 },
- { VIPH_CONTROL, 0 },
- { I2C_CNTL_1, 0 },
- { GEN_INT_CNTL, 0 },
- { CAP0_TRIG_CNTL, 0 },
-};
-
-static reg_val common_regs_m6[] = {
- { OVR_CLR, 0 },
- { OVR_WID_LEFT_RIGHT, 0 },
- { OVR_WID_TOP_BOTTOM, 0 },
- { OV0_SCALE_CNTL, 0 },
- { SUBPIC_CNTL, 0 },
- { GEN_INT_CNTL, 0 },
- { CAP0_TRIG_CNTL, 0 }
-};
-
-typedef struct {
- u8 clock_chip_type;
- u8 struct_size;
- u8 accelerator_entry;
- u8 VGA_entry;
- u16 VGA_table_offset;
- u16 POST_table_offset;
- u16 XCLK;
- u16 MCLK;
- u8 num_PLL_blocks;
- u8 size_PLL_blocks;
- u16 PCLK_ref_freq;
- u16 PCLK_ref_divider;
- u32 PCLK_min_freq;
- u32 PCLK_max_freq;
- u16 MCLK_ref_freq;
- u16 MCLK_ref_divider;
- u32 MCLK_min_freq;
- u32 MCLK_max_freq;
- u16 XCLK_ref_freq;
- u16 XCLK_ref_divider;
- u32 XCLK_min_freq;
- u32 XCLK_max_freq;
-} __attribute__ ((packed)) PLL_BLOCK;
-
-
-struct pll_info {
- int ppll_max;
- int ppll_min;
- int xclk;
- int ref_div;
- int ref_clk;
-};
-
-
-struct ram_info {
- int ml;
- int mb;
- int trcd;
- int trp;
- int twr;
- int cl;
- int tr2w;
- int loop_latency;
- int rloop;
-};
-
-
-struct radeon_regs {
- /* CRTC regs */
- u32 crtc_h_total_disp;
- u32 crtc_h_sync_strt_wid;
- u32 crtc_v_total_disp;
- u32 crtc_v_sync_strt_wid;
- u32 crtc_pitch;
- u32 crtc_gen_cntl;
- u32 crtc_ext_cntl;
- u32 dac_cntl;
-
- u32 flags;
- u32 pix_clock;
- int xres, yres;
-
- /* DDA regs */
- u32 dda_config;
- u32 dda_on_off;
-
- /* PLL regs */
- u32 ppll_div_3;
- u32 ppll_ref_div;
- u32 vclk_ecp_cntl;
-
- /* Flat panel regs */
- u32 fp_crtc_h_total_disp;
- u32 fp_crtc_v_total_disp;
- u32 fp_gen_cntl;
- u32 fp_h_sync_strt_wid;
- u32 fp_horz_stretch;
- u32 fp_panel_cntl;
- u32 fp_v_sync_strt_wid;
- u32 fp_vert_stretch;
- u32 lvds_gen_cntl;
- u32 lvds_pll_cntl;
- u32 tmds_crc;
- u32 tmds_transmitter_cntl;
-
-#if defined(__BIG_ENDIAN)
- u32 surface_cntl;
-#endif
-};
-
-
-struct radeonfb_info {
- struct fb_info info;
-
- struct radeon_regs state;
- struct radeon_regs init_state;
-
- char name[32];
- char ram_type[12];
-
- unsigned long mmio_base_phys;
- unsigned long fb_base_phys;
-
- void __iomem *mmio_base;
- void __iomem *fb_base;
-
- struct pci_dev *pdev;
-
- unsigned char *EDID;
- unsigned char __iomem *bios_seg;
-
- u32 pseudo_palette[17];
- struct { u8 red, green, blue, pad; } palette[256];
-
- int chipset;
- unsigned char arch;
- int video_ram;
- u8 rev;
- int pitch, bpp, depth;
- int xres, yres, pixclock;
- int xres_virtual, yres_virtual;
- u32 accel_flags;
-
- int use_default_var;
- int got_dfpinfo;
-
- int hasCRTC2;
- int crtDisp_type;
- int dviDisp_type;
-
- int panel_xres, panel_yres;
- int clock;
- int hOver_plus, hSync_width, hblank;
- int vOver_plus, vSync_width, vblank;
- int hAct_high, vAct_high, interlaced;
- int synct, misc;
-
- u32 dp_gui_master_cntl;
-
- struct pll_info pll;
- int pll_output_freq, post_div, fb_div;
-
- struct ram_info ram;
-
- int mtrr_hdl;
-
-#ifdef CONFIG_PMAC_PBOOK
- int pm_reg;
- u32 save_regs[64];
- u32 mdll, mdll2;
-#endif /* CONFIG_PMAC_PBOOK */
- int asleep;
-
- struct radeonfb_info *next;
-};
-
-
-static struct fb_var_screeninfo radeonfb_default_var = {
- 640, 480, 640, 480, 0, 0, 8, 0,
- {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0, 39721, 40, 24, 32, 11, 96, 2,
- 0, FB_VMODE_NONINTERLACED
-};
-
-/*
- * IO macros
- */
-
-#define INREG8(addr) readb((rinfo->mmio_base)+addr)
-#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
-#define INREG(addr) readl((rinfo->mmio_base)+addr)
-#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)
-
-#define OUTPLL(addr,val) \
- do { \
- OUTREG8(CLOCK_CNTL_INDEX, (addr & 0x0000003f) | 0x00000080); \
- OUTREG(CLOCK_CNTL_DATA, val); \
- } while(0)
-
-#define OUTPLLP(addr,val,mask) \
- do { \
- unsigned int _tmp = INPLL(addr); \
- _tmp &= (mask); \
- _tmp |= (val); \
- OUTPLL(addr, _tmp); \
- } while (0)
-
-#define OUTREGP(addr,val,mask) \
- do { \
- unsigned int _tmp = INREG(addr); \
- _tmp &= (mask); \
- _tmp |= (val); \
- OUTREG(addr, _tmp); \
- } while (0)
-
-
-static __inline__ u32 _INPLL(struct radeonfb_info *rinfo, u32 addr)
-{
- OUTREG8(CLOCK_CNTL_INDEX, addr & 0x0000003f);
- return (INREG(CLOCK_CNTL_DATA));
-}
-
-#define INPLL(addr) _INPLL(rinfo, addr)
-
-#define PRIMARY_MONITOR(rinfo) ((rinfo->dviDisp_type != MT_NONE) && \
- (rinfo->dviDisp_type != MT_STV) && \
- (rinfo->dviDisp_type != MT_CTV) ? \
- rinfo->dviDisp_type : rinfo->crtDisp_type)
-
-static char *GET_MON_NAME(int type)
-{
- char *pret = NULL;
-
- switch (type) {
- case MT_NONE:
- pret = "no";
- break;
- case MT_CRT:
- pret = "CRT";
- break;
- case MT_DFP:
- pret = "DFP";
- break;
- case MT_LCD:
- pret = "LCD";
- break;
- case MT_CTV:
- pret = "CTV";
- break;
- case MT_STV:
- pret = "STV";
- break;
- }
-
- return pret;
-}
-
-
-/*
- * 2D engine routines
- */
-
-static __inline__ void radeon_engine_flush (struct radeonfb_info *rinfo)
-{
- int i;
-
- /* initiate flush */
- OUTREGP(RB2D_DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
- ~RB2D_DC_FLUSH_ALL);
-
- for (i=0; i < 2000000; i++) {
- if (!(INREG(RB2D_DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))
- break;
- }
-}
-
-
-static __inline__ void _radeon_fifo_wait (struct radeonfb_info *rinfo, int entries)
-{
- int i;
-
- for (i=0; i<2000000; i++)
- if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
- return;
-}
-
-
-static __inline__ void _radeon_engine_idle (struct radeonfb_info *rinfo)
-{
- int i;
-
- /* ensure FIFO is empty before waiting for idle */
- _radeon_fifo_wait (rinfo, 64);
-
- for (i=0; i<2000000; i++) {
- if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
- radeon_engine_flush (rinfo);
- return;
- }
- }
-}
-
-
-#define radeon_engine_idle() _radeon_engine_idle(rinfo)
-#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
-
-
-
-/*
- * helper routines
- */
-
-static __inline__ u32 radeon_get_dstbpp(u16 depth)
-{
- switch (depth) {
- case 8:
- return DST_8BPP;
- case 15:
- return DST_15BPP;
- case 16:
- return DST_16BPP;
- case 32:
- return DST_32BPP;
- default:
- return 0;
- }
-}
-
-
-static inline int var_to_depth(const struct fb_var_screeninfo *var)
-{
- if (var->bits_per_pixel != 16)
- return var->bits_per_pixel;
- return (var->green.length == 6) ? 16 : 15;
-}
-
-
-static void _radeon_engine_reset(struct radeonfb_info *rinfo)
-{
- u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset;
-
- radeon_engine_flush (rinfo);
-
- clock_cntl_index = INREG(CLOCK_CNTL_INDEX);
- mclk_cntl = INPLL(MCLK_CNTL);
-
- OUTPLL(MCLK_CNTL, (mclk_cntl |
- FORCEON_MCLKA |
- FORCEON_MCLKB |
- FORCEON_YCLKA |
- FORCEON_YCLKB |
- FORCEON_MC |
- FORCEON_AIC));
- rbbm_soft_reset = INREG(RBBM_SOFT_RESET);
-
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset |
- SOFT_RESET_CP |
- SOFT_RESET_HI |
- SOFT_RESET_SE |
- SOFT_RESET_RE |
- SOFT_RESET_PP |
- SOFT_RESET_E2 |
- SOFT_RESET_RB);
- INREG(RBBM_SOFT_RESET);
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset & (u32)
- ~(SOFT_RESET_CP |
- SOFT_RESET_HI |
- SOFT_RESET_SE |
- SOFT_RESET_RE |
- SOFT_RESET_PP |
- SOFT_RESET_E2 |
- SOFT_RESET_RB));
- INREG(RBBM_SOFT_RESET);
-
- OUTPLL(MCLK_CNTL, mclk_cntl);
- OUTREG(CLOCK_CNTL_INDEX, clock_cntl_index);
- OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset);
-
- return;
-}
-
-#define radeon_engine_reset() _radeon_engine_reset(rinfo)
-
-
-static __inline__ int round_div(int num, int den)
-{
- return (num + (den / 2)) / den;
-}
-
-
-
-static __inline__ int min_bits_req(int val)
-{
- int bits_req = 0;
-
- if (val == 0)
- bits_req = 1;
-
- while (val) {
- val >>= 1;
- bits_req++;
- }
-
- return (bits_req);
-}
-
-
-static __inline__ int _max(int val1, int val2)
-{
- if (val1 >= val2)
- return val1;
- else
- return val2;
-}
-
-
-
-/*
- * globals
- */
-
-#ifndef MODULE
-static char *mode_option;
-#endif
-
-static char noaccel = 0;
-static char mirror = 0;
-static int panel_yres = 0;
-static char force_dfp = 0;
-static struct radeonfb_info *board_list = NULL;
-static char nomtrr = 0;
-
-/*
- * prototypes
- */
-
-static void radeon_save_state (struct radeonfb_info *rinfo,
- struct radeon_regs *save);
-static void radeon_engine_init (struct radeonfb_info *rinfo);
-static void radeon_write_mode (struct radeonfb_info *rinfo,
- struct radeon_regs *mode);
-static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo);
-static int __devinit radeon_init_disp (struct radeonfb_info *rinfo);
-static int radeon_init_disp_var (struct radeonfb_info *rinfo, struct fb_var_screeninfo *var);
-static void __iomem *radeon_find_rom(struct radeonfb_info *rinfo);
-static void radeon_get_pllinfo(struct radeonfb_info *rinfo, void __iomem *bios_seg);
-static void radeon_get_moninfo (struct radeonfb_info *rinfo);
-static int radeon_get_dfpinfo (struct radeonfb_info *rinfo);
-static int radeon_get_dfpinfo_BIOS(struct radeonfb_info *rinfo);
-static void radeon_get_EDID(struct radeonfb_info *rinfo);
-static int radeon_dfp_parse_EDID(struct radeonfb_info *rinfo);
-static void radeon_update_default_var(struct radeonfb_info *rinfo);
-
-#ifdef CONFIG_PPC_OF
-
-static int radeon_read_OF (struct radeonfb_info *rinfo);
-static int radeon_get_EDID_OF(struct radeonfb_info *rinfo);
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
-
-#ifdef CONFIG_PMAC_PBOOK
-int radeon_sleep_notify(struct pmu_sleep_notifier *self, int when);
-static struct pmu_sleep_notifier radeon_sleep_notifier = {
- radeon_sleep_notify, SLEEP_LEVEL_VIDEO,
-};
-#endif /* CONFIG_PMAC_PBOOK */
-#ifdef CONFIG_PMAC_BACKLIGHT
-static int radeon_set_backlight_enable(int on, int level, void *data);
-static int radeon_set_backlight_level(int level, void *data);
-static struct backlight_controller radeon_backlight_controller = {
- radeon_set_backlight_enable,
- radeon_set_backlight_level
-};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-#endif /* CONFIG_PPC_OF */
-
-
-static void __iomem *radeon_find_rom(struct radeonfb_info *rinfo)
-{
-#if defined(__i386__)
- u32 segstart;
- char __iomem *rom_base;
- char __iomem *rom;
- int stage;
- int i,j;
- char aty_rom_sig[] = "761295520";
- char *radeon_sig[] = {
- "RG6",
- "RADEON"
- };
-
- for(segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
-
- stage = 1;
-
- rom_base = ioremap(segstart, 0x1000);
-
- if ((*rom_base == 0x55) && (((*(rom_base + 1)) & 0xff) == 0xaa))
- stage = 2;
-
-
- if (stage != 2) {
- iounmap(rom_base);
- continue;
- }
-
- rom = rom_base;
-
- for (i = 0; (i < 128 - strlen(aty_rom_sig)) && (stage != 3); i++) {
- if (aty_rom_sig[0] == *rom)
- if (strncmp(aty_rom_sig, rom,
- strlen(aty_rom_sig)) == 0)
- stage = 3;
- rom++;
- }
- if (stage != 3) {
- iounmap(rom_base);
- continue;
- }
- rom = rom_base;
-
- for (i = 0; (i < 512) && (stage != 4); i++) {
- for (j = 0; j < ARRAY_SIZE(radeon_sig); j++) {
- if (radeon_sig[j][0] == *rom)
- if (strncmp(radeon_sig[j], rom,
- strlen(radeon_sig[j])) == 0) {
- stage = 4;
- break;
- }
- }
- rom++;
- }
- if (stage != 4) {
- iounmap(rom_base);
- continue;
- }
-
- return rom_base;
- }
-#endif
- return NULL;
-}
-
-
-
-
-static void radeon_get_pllinfo(struct radeonfb_info *rinfo, void __iomem *bios_seg)
-{
- void __iomem *bios_header;
- void __iomem *header_ptr;
- u16 bios_header_offset, pll_info_offset;
- PLL_BLOCK pll;
-
- if (bios_seg) {
- bios_header = bios_seg + 0x48L;
- header_ptr = bios_header;
-
- bios_header_offset = readw(header_ptr);
- bios_header = bios_seg + bios_header_offset;
- bios_header += 0x30;
-
- header_ptr = bios_header;
- pll_info_offset = readw(header_ptr);
- header_ptr = bios_seg + pll_info_offset;
-
- memcpy_fromio(&pll, header_ptr, 50);
-
- rinfo->pll.xclk = (u32)pll.XCLK;
- rinfo->pll.ref_clk = (u32)pll.PCLK_ref_freq;
- rinfo->pll.ref_div = (u32)pll.PCLK_ref_divider;
- rinfo->pll.ppll_min = pll.PCLK_min_freq;
- rinfo->pll.ppll_max = pll.PCLK_max_freq;
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d from BIOS\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
- } else {
-#ifdef CONFIG_PPC_OF
- if (radeon_read_OF(rinfo)) {
- unsigned int tmp, Nx, M, ref_div, xclk;
-
- tmp = INPLL(M_SPLL_REF_FB_DIV);
- ref_div = INPLL(PPLL_REF_DIV) & 0x3ff;
-
- Nx = (tmp & 0xff00) >> 8;
- M = (tmp & 0xff);
- xclk = ((((2 * Nx * rinfo->pll.ref_clk) + (M)) /
- (2 * M)));
-
- rinfo->pll.xclk = xclk;
- rinfo->pll.ref_div = ref_div;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.ppll_max = 35000;
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d from OF\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
-
- return;
- }
-#endif
- /* no BIOS or BIOS not found, use defaults */
- switch (rinfo->chipset) {
- case PCI_DEVICE_ID_ATI_RADEON_QW:
- case PCI_DEVICE_ID_ATI_RADEON_QX:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 23000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_QL:
- case PCI_DEVICE_ID_ATI_RADEON_QN:
- case PCI_DEVICE_ID_ATI_RADEON_QO:
- case PCI_DEVICE_ID_ATI_RADEON_Ql:
- case PCI_DEVICE_ID_ATI_RADEON_BB:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 27500;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_Id:
- case PCI_DEVICE_ID_ATI_RADEON_Ie:
- case PCI_DEVICE_ID_ATI_RADEON_If:
- case PCI_DEVICE_ID_ATI_RADEON_Ig:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 25000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_ND:
- case PCI_DEVICE_ID_ATI_RADEON_NE:
- case PCI_DEVICE_ID_ATI_RADEON_NF:
- case PCI_DEVICE_ID_ATI_RADEON_NG:
- rinfo->pll.ppll_max = 40000;
- rinfo->pll.ppll_min = 20000;
- rinfo->pll.xclk = 27000;
- rinfo->pll.ref_div = 12;
- rinfo->pll.ref_clk = 2700;
- break;
- case PCI_DEVICE_ID_ATI_RADEON_QD:
- case PCI_DEVICE_ID_ATI_RADEON_QE:
- case PCI_DEVICE_ID_ATI_RADEON_QF:
- case PCI_DEVICE_ID_ATI_RADEON_QG:
- default:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
- rinfo->pll.xclk = 16600;
- rinfo->pll.ref_div = 67;
- rinfo->pll.ref_clk = 2700;
- break;
- }
-
- printk("radeonfb: ref_clk=%d, ref_div=%d, xclk=%d defaults\n",
- rinfo->pll.ref_clk, rinfo->pll.ref_div, rinfo->pll.xclk);
- }
-}
-
-
-static void radeon_get_moninfo (struct radeonfb_info *rinfo)
-{
- unsigned int tmp;
-
- if (force_dfp) {
- rinfo->dviDisp_type = MT_DFP;
- return;
- }
-
- tmp = INREG(BIOS_4_SCRATCH);
- printk(KERN_DEBUG "radeon_get_moninfo: bios 4 scratch = %x\n", tmp);
-
- if (rinfo->hasCRTC2) {
- /* primary DVI port */
- if (tmp & 0x08)
- rinfo->dviDisp_type = MT_DFP;
- else if (tmp & 0x4)
- rinfo->dviDisp_type = MT_LCD;
- else if (tmp & 0x200)
- rinfo->dviDisp_type = MT_CRT;
- else if (tmp & 0x10)
- rinfo->dviDisp_type = MT_CTV;
- else if (tmp & 0x20)
- rinfo->dviDisp_type = MT_STV;
-
- /* secondary CRT port */
- if (tmp & 0x2)
- rinfo->crtDisp_type = MT_CRT;
- else if (tmp & 0x800)
- rinfo->crtDisp_type = MT_DFP;
- else if (tmp & 0x400)
- rinfo->crtDisp_type = MT_LCD;
- else if (tmp & 0x1000)
- rinfo->crtDisp_type = MT_CTV;
- else if (tmp & 0x2000)
- rinfo->crtDisp_type = MT_STV;
- } else {
- rinfo->dviDisp_type = MT_NONE;
-
- tmp = INREG(FP_GEN_CNTL);
-
- if (tmp & FP_EN_TMDS)
- rinfo->crtDisp_type = MT_DFP;
- else
- rinfo->crtDisp_type = MT_CRT;
- }
-}
-
-
-
-static void radeon_get_EDID(struct radeonfb_info *rinfo)
-{
-#ifdef CONFIG_PPC_OF
- if (!radeon_get_EDID_OF(rinfo))
- RTRACE("radeonfb: could not retrieve EDID from OF\n");
-#else
- /* XXX use other methods later */
-#endif
-}
-
-
-#ifdef CONFIG_PPC_OF
-static int radeon_get_EDID_OF(struct radeonfb_info *rinfo)
-{
- struct device_node *dp;
- unsigned char *pedid = NULL;
- static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID", "EDID1", NULL };
- int i;
-
- dp = pci_device_to_OF_node(rinfo->pdev);
- while (dp != NULL) {
- for (i = 0; propnames[i] != NULL; ++i) {
- pedid = (unsigned char *)
- get_property(dp, propnames[i], NULL);
- if (pedid != NULL) {
- rinfo->EDID = pedid;
- return 1;
- }
- }
- dp = dp->child;
- }
- return 0;
-}
-#endif /* CONFIG_PPC_OF */
-
-
-static int radeon_dfp_parse_EDID(struct radeonfb_info *rinfo)
-{
- unsigned char *block = rinfo->EDID;
-
- if (!block)
- return 0;
-
- /* jump to the detailed timing block section */
- block += 54;
-
- rinfo->clock = (block[0] + (block[1] << 8));
- rinfo->panel_xres = (block[2] + ((block[4] & 0xf0) << 4));
- rinfo->hblank = (block[3] + ((block[4] & 0x0f) << 8));
- rinfo->panel_yres = (block[5] + ((block[7] & 0xf0) << 4));
- rinfo->vblank = (block[6] + ((block[7] & 0x0f) << 8));
- rinfo->hOver_plus = (block[8] + ((block[11] & 0xc0) << 2));
- rinfo->hSync_width = (block[9] + ((block[11] & 0x30) << 4));
- rinfo->vOver_plus = ((block[10] >> 4) + ((block[11] & 0x0c) << 2));
- rinfo->vSync_width = ((block[10] & 0x0f) + ((block[11] & 0x03) << 4));
- rinfo->interlaced = ((block[17] & 0x80) >> 7);
- rinfo->synct = ((block[17] & 0x18) >> 3);
- rinfo->misc = ((block[17] & 0x06) >> 1);
- rinfo->hAct_high = rinfo->vAct_high = 0;
- if (rinfo->synct == 3) {
- if (rinfo->misc & 2)
- rinfo->hAct_high = 1;
- if (rinfo->misc & 1)
- rinfo->vAct_high = 1;
- }
-
- printk("radeonfb: detected DFP panel size from EDID: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- rinfo->got_dfpinfo = 1;
-
- return 1;
-}
-
-
-static void radeon_update_default_var(struct radeonfb_info *rinfo)
-{
- struct fb_var_screeninfo *var = &radeonfb_default_var;
-
- var->xres = rinfo->panel_xres;
- var->yres = rinfo->panel_yres;
- var->xres_virtual = rinfo->panel_xres;
- var->yres_virtual = rinfo->panel_yres;
- var->xoffset = var->yoffset = 0;
- var->bits_per_pixel = 8;
- var->pixclock = 100000000 / rinfo->clock;
- var->left_margin = (rinfo->hblank - rinfo->hOver_plus - rinfo->hSync_width);
- var->right_margin = rinfo->hOver_plus;
- var->upper_margin = (rinfo->vblank - rinfo->vOver_plus - rinfo->vSync_width);
- var->lower_margin = rinfo->vOver_plus;
- var->hsync_len = rinfo->hSync_width;
- var->vsync_len = rinfo->vSync_width;
- var->sync = 0;
- if (rinfo->synct == 3) {
- if (rinfo->hAct_high)
- var->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (rinfo->vAct_high)
- var->sync |= FB_SYNC_VERT_HIGH_ACT;
- }
-
- var->vmode = 0;
- if (rinfo->interlaced)
- var->vmode |= FB_VMODE_INTERLACED;
-
- rinfo->use_default_var = 1;
-}
-
-
-static int radeon_get_dfpinfo_BIOS(struct radeonfb_info *rinfo)
-{
- char __iomem *fpbiosstart, *tmp, *tmp0;
- char stmp[30];
- int i;
-
- if (!rinfo->bios_seg)
- return 0;
-
- if (!(fpbiosstart = rinfo->bios_seg + readw(rinfo->bios_seg + 0x48))) {
- printk("radeonfb: Failed to detect DFP panel info using BIOS\n");
- return 0;
- }
-
- if (!(tmp = rinfo->bios_seg + readw(fpbiosstart + 0x40))) {
- printk("radeonfb: Failed to detect DFP panel info using BIOS\n");
- return 0;
- }
-
- for(i=0; i<24; i++)
- stmp[i] = readb(tmp+i+1);
- stmp[24] = 0;
- printk("radeonfb: panel ID string: %s\n", stmp);
- rinfo->panel_xres = readw(tmp + 25);
- rinfo->panel_yres = readw(tmp + 27);
- printk("radeonfb: detected DFP panel size from BIOS: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- for(i=0; i<32; i++) {
- tmp0 = rinfo->bios_seg + readw(tmp+64+i*2);
- if (tmp0 == 0)
- break;
- if ((readw(tmp0) == rinfo->panel_xres) &&
- (readw(tmp0+2) == rinfo->panel_yres)) {
- rinfo->hblank = (readw(tmp0+17) - readw(tmp0+19)) * 8;
- rinfo->hOver_plus = ((readw(tmp0+21) - readw(tmp0+19) -1) * 8) & 0x7fff;
- rinfo->hSync_width = readb(tmp0+23) * 8;
- rinfo->vblank = readw(tmp0+24) - readw(tmp0+26);
- rinfo->vOver_plus = (readw(tmp0+28) & 0x7ff) - readw(tmp0+26);
- rinfo->vSync_width = (readw(tmp0+28) & 0xf800) >> 11;
- rinfo->clock = readw(tmp0+9);
-
- rinfo->got_dfpinfo = 1;
- return 1;
- }
- }
-
- return 0;
-}
-
-
-
-static int radeon_get_dfpinfo (struct radeonfb_info *rinfo)
-{
- unsigned int tmp;
- unsigned short a, b;
-
- if (radeon_get_dfpinfo_BIOS(rinfo))
- radeon_update_default_var(rinfo);
-
- if (radeon_dfp_parse_EDID(rinfo))
- radeon_update_default_var(rinfo);
-
- if (!rinfo->got_dfpinfo) {
- /*
- * it seems all else has failed now and we
- * resort to probing registers for our DFP info
- */
- if (panel_yres) {
- rinfo->panel_yres = panel_yres;
- } else {
- tmp = INREG(FP_VERT_STRETCH);
- tmp &= 0x00fff000;
- rinfo->panel_yres = (unsigned short)(tmp >> 0x0c) + 1;
- }
-
- switch (rinfo->panel_yres) {
- case 480:
- rinfo->panel_xres = 640;
- break;
- case 600:
- rinfo->panel_xres = 800;
- break;
- case 768:
-#if defined(__powerpc__)
- if (rinfo->dviDisp_type == MT_LCD)
- rinfo->panel_xres = 1152;
- else
-#endif
- rinfo->panel_xres = 1024;
- break;
- case 1024:
- rinfo->panel_xres = 1280;
- break;
- case 1050:
- rinfo->panel_xres = 1400;
- break;
- case 1200:
- rinfo->panel_xres = 1600;
- break;
- default:
- printk("radeonfb: Failed to detect DFP panel size\n");
- return 0;
- }
-
- printk("radeonfb: detected DFP panel size from registers: %dx%d\n",
- rinfo->panel_xres, rinfo->panel_yres);
-
- tmp = INREG(FP_CRTC_H_TOTAL_DISP);
- a = (tmp & FP_CRTC_H_TOTAL_MASK) + 4;
- b = (tmp & 0x01ff0000) >> FP_CRTC_H_DISP_SHIFT;
- rinfo->hblank = (a - b + 1) * 8;
-
- tmp = INREG(FP_H_SYNC_STRT_WID);
- rinfo->hOver_plus = (unsigned short) ((tmp & FP_H_SYNC_STRT_CHAR_MASK) >>
- FP_H_SYNC_STRT_CHAR_SHIFT) - b - 1;
- rinfo->hOver_plus *= 8;
- rinfo->hSync_width = (unsigned short) ((tmp & FP_H_SYNC_WID_MASK) >>
- FP_H_SYNC_WID_SHIFT);
- rinfo->hSync_width *= 8;
- tmp = INREG(FP_CRTC_V_TOTAL_DISP);
- a = (tmp & FP_CRTC_V_TOTAL_MASK) + 1;
- b = (tmp & FP_CRTC_V_DISP_MASK) >> FP_CRTC_V_DISP_SHIFT;
- rinfo->vblank = a - b /* + 24 */ ;
-
- tmp = INREG(FP_V_SYNC_STRT_WID);
- rinfo->vOver_plus = (unsigned short) (tmp & FP_V_SYNC_STRT_MASK)
- - b + 1;
- rinfo->vSync_width = (unsigned short) ((tmp & FP_V_SYNC_WID_MASK) >>
- FP_V_SYNC_WID_SHIFT);
-
- return 1;
- }
-
- return 1;
-}
-
-
-#ifdef CONFIG_PPC_OF
-static int radeon_read_OF (struct radeonfb_info *rinfo)
-{
- struct device_node *dp;
- unsigned int *xtal;
-
- dp = pci_device_to_OF_node(rinfo->pdev);
-
- xtal = (unsigned int *) get_property(dp, "ATY,RefCLK", NULL);
-
- rinfo->pll.ref_clk = *xtal / 10;
-
- if (*xtal)
- return 1;
- else
- return 0;
-}
-#endif
-
-
-static void radeon_engine_init (struct radeonfb_info *rinfo)
-{
- u32 temp;
-
- /* disable 3D engine */
- OUTREG(RB3D_CNTL, 0);
-
- radeon_engine_reset ();
-
- radeon_fifo_wait (1);
- OUTREG(RB2D_DSTCACHE_MODE, 0);
-
- radeon_fifo_wait (1);
- temp = INREG(DEFAULT_PITCH_OFFSET);
- OUTREG(DEFAULT_PITCH_OFFSET, ((temp & 0xc0000000) |
- (rinfo->pitch << 0x16)));
-
- radeon_fifo_wait (1);
- OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
-
- radeon_fifo_wait (1);
- OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
- DEFAULT_SC_BOTTOM_MAX));
-
- temp = radeon_get_dstbpp(rinfo->depth);
- rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
- radeon_fifo_wait (1);
- OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
- GMC_BRUSH_SOLID_COLOR |
- GMC_SRC_DATATYPE_COLOR));
-
- radeon_fifo_wait (7);
-
- /* clear line drawing regs */
- OUTREG(DST_LINE_START, 0);
- OUTREG(DST_LINE_END, 0);
-
- /* set brush color regs */
- OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
- OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
-
- /* set source color regs */
- OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
- OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
-
- /* default write mask */
- OUTREG(DP_WRITE_MSK, 0xffffffff);
-
- radeon_engine_idle ();
-}
-
-
-static int __devinit radeon_init_disp (struct radeonfb_info *rinfo)
-{
- struct fb_info *info = &rinfo->info;
- struct fb_var_screeninfo var;
-
- var = radeonfb_default_var;
- if ((radeon_init_disp_var(rinfo, &var)) < 0)
- return -1;
-
- rinfo->depth = var_to_depth(&var);
- rinfo->bpp = var.bits_per_pixel;
-
- info->var = var;
- fb_alloc_cmap(&info->cmap, 256, 0);
-
- var.activate = FB_ACTIVATE_NOW;
- return 0;
-}
-
-
-static int radeon_init_disp_var (struct radeonfb_info *rinfo,
- struct fb_var_screeninfo *var)
-{
-#ifndef MODULE
- if (mode_option)
- fb_find_mode (var, &rinfo->info, mode_option,
- NULL, 0, NULL, 8);
- else
-#endif
- if (rinfo->use_default_var)
- /* We will use the modified default far */
- *var = radeonfb_default_var;
- else
-
- fb_find_mode (var, &rinfo->info, "640x480-8@60",
- NULL, 0, NULL, 0);
-
- if (noaccel)
- var->accel_flags &= ~FB_ACCELF_TEXT;
- else
- var->accel_flags |= FB_ACCELF_TEXT;
-
- return 0;
-}
-
-
-static int radeon_do_maximize(struct radeonfb_info *rinfo,
- struct fb_var_screeninfo *var,
- struct fb_var_screeninfo *v,
- int nom, int den)
-{
- static struct {
- int xres, yres;
- } modes[] = {
- {1600, 1280},
- {1280, 1024},
- {1024, 768},
- {800, 600},
- {640, 480},
- {-1, -1}
- };
- int i;
-
- /* use highest possible virtual resolution */
- if (v->xres_virtual == -1 && v->yres_virtual == -1) {
- printk("radeonfb: using max available virtual resolution\n");
- for (i=0; modes[i].xres != -1; i++) {
- if (modes[i].xres * nom / den * modes[i].yres <
- rinfo->video_ram / 2)
- break;
- }
- if (modes[i].xres == -1) {
- printk("radeonfb: could not find virtual resolution that fits into video memory!\n");
- return -EINVAL;
- }
- v->xres_virtual = modes[i].xres;
- v->yres_virtual = modes[i].yres;
-
- printk("radeonfb: virtual resolution set to max of %dx%d\n",
- v->xres_virtual, v->yres_virtual);
- } else if (v->xres_virtual == -1) {
- v->xres_virtual = (rinfo->video_ram * den /
- (nom * v->yres_virtual * 2)) & ~15;
- } else if (v->yres_virtual == -1) {
- v->xres_virtual = (v->xres_virtual + 15) & ~15;
- v->yres_virtual = rinfo->video_ram * den /
- (nom * v->xres_virtual *2);
- } else {
- if (v->xres_virtual * nom / den * v->yres_virtual >
- rinfo->video_ram) {
- return -EINVAL;
- }
- }
-
- if (v->xres_virtual * nom / den >= 8192) {
- v->xres_virtual = 8192 * den / nom - 16;
- }
-
- if (v->xres_virtual < v->xres)
- return -EINVAL;
-
- if (v->yres_virtual < v->yres)
- return -EINVAL;
-
- return 0;
-}
-
-
-static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info->par;
- struct fb_var_screeninfo v;
- int nom, den;
-
- memcpy (&v, var, sizeof (v));
-
- switch (v.bits_per_pixel) {
- case 0 ... 8:
- v.bits_per_pixel = 8;
- break;
- case 9 ... 16:
- v.bits_per_pixel = 16;
- break;
- case 17 ... 24:
-#if 0 /* Doesn't seem to work */
- v.bits_per_pixel = 24;
- break;
-#endif
- return -EINVAL;
- case 25 ... 32:
- v.bits_per_pixel = 32;
- break;
- default:
- return -EINVAL;
- }
-
- switch (var_to_depth(&v)) {
- case 8:
- nom = den = 1;
- v.red.offset = v.green.offset = v.blue.offset = 0;
- v.red.length = v.green.length = v.blue.length = 8;
- v.transp.offset = v.transp.length = 0;
- break;
- case 15:
- nom = 2;
- den = 1;
- v.red.offset = 10;
- v.green.offset = 5;
- v.blue.offset = 0;
- v.red.length = v.green.length = v.blue.length = 5;
- v.transp.offset = v.transp.length = 0;
- break;
- case 16:
- nom = 2;
- den = 1;
- v.red.offset = 11;
- v.green.offset = 5;
- v.blue.offset = 0;
- v.red.length = 5;
- v.green.length = 6;
- v.blue.length = 5;
- v.transp.offset = v.transp.length = 0;
- break;
- case 24:
- nom = 4;
- den = 1;
- v.red.offset = 16;
- v.green.offset = 8;
- v.blue.offset = 0;
- v.red.length = v.blue.length = v.green.length = 8;
- v.transp.offset = v.transp.length = 0;
- break;
- case 32:
- nom = 4;
- den = 1;
- v.red.offset = 16;
- v.green.offset = 8;
- v.blue.offset = 0;
- v.red.length = v.blue.length = v.green.length = 8;
- v.transp.offset = 24;
- v.transp.length = 8;
- break;
- default:
- printk ("radeonfb: mode %dx%dx%d rejected, color depth invalid\n",
- var->xres, var->yres, var->bits_per_pixel);
- return -EINVAL;
- }
-
- if (radeon_do_maximize(rinfo, var, &v, nom, den) < 0)
- return -EINVAL;
-
- if (v.xoffset < 0)
- v.xoffset = 0;
- if (v.yoffset < 0)
- v.yoffset = 0;
-
- if (v.xoffset > v.xres_virtual - v.xres)
- v.xoffset = v.xres_virtual - v.xres - 1;
-
- if (v.yoffset > v.yres_virtual - v.yres)
- v.yoffset = v.yres_virtual - v.yres - 1;
-
- v.red.msb_right = v.green.msb_right = v.blue.msb_right =
- v.transp.offset = v.transp.length =
- v.transp.msb_right = 0;
-
- if (noaccel)
- v.accel_flags = 0;
-
- memcpy(var, &v, sizeof(v));
-
- return 0;
-}
-
-
-static int radeonfb_pan_display (struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
-
- if ((var->xoffset + var->xres > var->xres_virtual)
- || (var->yoffset + var->yres > var->yres_virtual))
- return -EINVAL;
-
- if (rinfo->asleep)
- return 0;
-
- OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
- * var->bits_per_pixel / 8) & ~7);
- return 0;
-}
-
-
-static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,
- unsigned long arg)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- unsigned int tmp;
- u32 value = 0;
- int rc;
-
- switch (cmd) {
- /*
- * TODO: set mirror accordingly for non-Mobility chipsets with 2 CRTC's
- */
- case FBIO_RADEON_SET_MIRROR:
- switch (rinfo->arch) {
- case RADEON_R100:
- case RADEON_RV100:
- case RADEON_R200:
- case RADEON_RV200:
- case RADEON_RV250:
- case RADEON_R300:
- return -EINVAL;
- default:
- /* RADEON M6, RADEON_M7, RADEON_M9 */
- break;
- }
-
- rc = get_user(value, (__u32 __user *)arg);
-
- if (rc)
- return rc;
-
- if (value & 0x01) {
- tmp = INREG(LVDS_GEN_CNTL);
-
- tmp |= (LVDS_ON | LVDS_BLON);
- } else {
- tmp = INREG(LVDS_GEN_CNTL);
-
- tmp &= ~(LVDS_ON | LVDS_BLON);
- }
-
- OUTREG(LVDS_GEN_CNTL, tmp);
-
- if (value & 0x02) {
- tmp = INREG(CRTC_EXT_CNTL);
- tmp |= CRTC_CRT_ON;
-
- mirror = 1;
- } else {
- tmp = INREG(CRTC_EXT_CNTL);
- tmp &= ~CRTC_CRT_ON;
-
- mirror = 0;
- }
-
- OUTREG(CRTC_EXT_CNTL, tmp);
-
- break;
- case FBIO_RADEON_GET_MIRROR:
- switch (rinfo->arch) {
- case RADEON_R100:
- case RADEON_RV100:
- case RADEON_R200:
- case RADEON_RV200:
- case RADEON_RV250:
- case RADEON_R300:
- return -EINVAL;
- default:
- /* RADEON M6, RADEON_M7, RADEON_M9 */
- break;
- }
-
- tmp = INREG(LVDS_GEN_CNTL);
- if ((LVDS_ON | LVDS_BLON) & tmp)
- value |= 0x01;
-
- tmp = INREG(CRTC_EXT_CNTL);
- if (CRTC_CRT_ON & tmp)
- value |= 0x02;
-
- return put_user(value, (__u32 __user *)arg);
- default:
- return -EINVAL;
- }
-
- return -EINVAL;
-}
-
-
-static int radeonfb_blank (int blank, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- u32 val = INREG(CRTC_EXT_CNTL);
- u32 val2 = INREG(LVDS_GEN_CNTL);
-
- if (rinfo->asleep)
- return 0;
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->dviDisp_type == MT_LCD && machine_is(powermac)) {
- set_backlight_enable(!blank);
- return 0;
- }
-#endif
-
- /* reset it */
- val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
- CRTC_VSYNC_DIS);
- val2 &= ~(LVDS_DISPLAY_DIS);
-
- switch (blank) {
- case FB_BLANK_UNBLANK:
- case FB_BLANK_NORMAL:
- break;
- case FB_BLANK_VSYNC_SUSPEND:
- val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS);
- break;
- case FB_BLANK_HSYNC_SUSPEND:
- val |= (CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS);
- break;
- case FB_BLANK_POWERDOWN:
- val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS |
- CRTC_HSYNC_DIS);
- val2 |= (LVDS_DISPLAY_DIS);
- break;
- }
-
- switch (rinfo->dviDisp_type) {
- case MT_LCD:
- OUTREG(LVDS_GEN_CNTL, val2);
- break;
- case MT_CRT:
- default:
- OUTREG(CRTC_EXT_CNTL, val);
- break;
- }
-
- /* let fbcon do a soft blank for us */
- return (blank == FB_BLANK_NORMAL) ? 1 : 0;
-}
-
-
-static int radeonfb_setcolreg (unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp, struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *) info;
- u32 pindex, vclk_cntl;
- unsigned int i;
-
- if (regno > 255)
- return 1;
-
- red >>= 8;
- green >>= 8;
- blue >>= 8;
- rinfo->palette[regno].red = red;
- rinfo->palette[regno].green = green;
- rinfo->palette[regno].blue = blue;
-
- /* default */
- pindex = regno;
-
- if (!rinfo->asleep) {
- vclk_cntl = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, vclk_cntl & ~PIXCLK_DAC_ALWAYS_ONb);
-
- if (rinfo->bpp == 16) {
- pindex = regno * 8;
-
- if (rinfo->depth == 16 && regno > 63)
- return 1;
- if (rinfo->depth == 15 && regno > 31)
- return 1;
-
- /* For 565, the green component is mixed one order below */
- if (rinfo->depth == 16) {
- OUTREG(PALETTE_INDEX, pindex>>1);
- OUTREG(PALETTE_DATA, (rinfo->palette[regno>>1].red << 16) |
- (green << 8) | (rinfo->palette[regno>>1].blue));
- green = rinfo->palette[regno<<1].green;
- }
- }
-
- if (rinfo->depth != 16 || regno < 32) {
- OUTREG(PALETTE_INDEX, pindex);
- OUTREG(PALETTE_DATA, (red << 16) | (green << 8) | blue);
- }
-
- OUTPLL(VCLK_ECP_CNTL, vclk_cntl);
- }
- if (regno < 16) {
- switch (rinfo->depth) {
- case 15:
- ((u16 *) (info->pseudo_palette))[regno] =
- (regno << 10) | (regno << 5) | regno;
- break;
- case 16:
- ((u16 *) (info->pseudo_palette))[regno] =
- (regno << 11) | (regno << 6) | regno;
- break;
- case 24:
- ((u32 *) (info->pseudo_palette))[regno] =
- (regno << 16) | (regno << 8) | regno;
- break;
- case 32:
- i = (regno << 8) | regno;
- ((u32 *) (info->pseudo_palette))[regno] =
- (i << 16) | i;
- break;
- }
- }
- return 0;
-}
-
-
-
-static void radeon_save_state (struct radeonfb_info *rinfo,
- struct radeon_regs *save)
-{
- /* CRTC regs */
- save->crtc_gen_cntl = INREG(CRTC_GEN_CNTL);
- save->crtc_ext_cntl = INREG(CRTC_EXT_CNTL);
- save->dac_cntl = INREG(DAC_CNTL);
- save->crtc_h_total_disp = INREG(CRTC_H_TOTAL_DISP);
- save->crtc_h_sync_strt_wid = INREG(CRTC_H_SYNC_STRT_WID);
- save->crtc_v_total_disp = INREG(CRTC_V_TOTAL_DISP);
- save->crtc_v_sync_strt_wid = INREG(CRTC_V_SYNC_STRT_WID);
- save->crtc_pitch = INREG(CRTC_PITCH);
-#if defined(__BIG_ENDIAN)
- save->surface_cntl = INREG(SURFACE_CNTL);
-#endif
-
- /* FP regs */
- save->fp_crtc_h_total_disp = INREG(FP_CRTC_H_TOTAL_DISP);
- save->fp_crtc_v_total_disp = INREG(FP_CRTC_V_TOTAL_DISP);
- save->fp_gen_cntl = INREG(FP_GEN_CNTL);
- save->fp_h_sync_strt_wid = INREG(FP_H_SYNC_STRT_WID);
- save->fp_horz_stretch = INREG(FP_HORZ_STRETCH);
- save->fp_v_sync_strt_wid = INREG(FP_V_SYNC_STRT_WID);
- save->fp_vert_stretch = INREG(FP_VERT_STRETCH);
- save->lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
- save->lvds_pll_cntl = INREG(LVDS_PLL_CNTL);
- save->tmds_crc = INREG(TMDS_CRC);
- save->tmds_transmitter_cntl = INREG(TMDS_TRANSMITTER_CNTL);
- save->vclk_ecp_cntl = INPLL(VCLK_ECP_CNTL);
-}
-
-
-
-static int radeonfb_set_par (struct fb_info *info)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *)info->par;
- struct fb_var_screeninfo *mode = &info->var;
- struct radeon_regs newmode;
- int hTotal, vTotal, hSyncStart, hSyncEnd,
- hSyncPol, vSyncStart, vSyncEnd, vSyncPol, cSync;
- u8 hsync_adj_tab[] = {0, 0x12, 9, 9, 6, 5};
- u8 hsync_fudge_fp[] = {2, 2, 0, 0, 5, 5};
- u32 dotClock = 1000000000 / mode->pixclock,
- sync, h_sync_pol, v_sync_pol;
- int freq = dotClock / 10; /* x 100 */
- int xclk_freq, vclk_freq, xclk_per_trans, xclk_per_trans_precise;
- int useable_precision, roff, ron;
- int min_bits, format = 0;
- int hsync_start, hsync_fudge, bytpp, hsync_wid, vsync_wid;
- int primary_mon = PRIMARY_MONITOR(rinfo);
- int depth = var_to_depth(mode);
- int accel = (mode->accel_flags & FB_ACCELF_TEXT) != 0;
-
- rinfo->xres = mode->xres;
- rinfo->yres = mode->yres;
- rinfo->xres_virtual = mode->xres_virtual;
- rinfo->yres_virtual = mode->yres_virtual;
- rinfo->pixclock = mode->pixclock;
-
- hSyncStart = mode->xres + mode->right_margin;
- hSyncEnd = hSyncStart + mode->hsync_len;
- hTotal = hSyncEnd + mode->left_margin;
-
- vSyncStart = mode->yres + mode->lower_margin;
- vSyncEnd = vSyncStart + mode->vsync_len;
- vTotal = vSyncEnd + mode->upper_margin;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- if (rinfo->panel_xres < mode->xres)
- rinfo->xres = mode->xres = rinfo->panel_xres;
- if (rinfo->panel_yres < mode->yres)
- rinfo->yres = mode->yres = rinfo->panel_yres;
-
- hTotal = mode->xres + rinfo->hblank;
- hSyncStart = mode->xres + rinfo->hOver_plus;
- hSyncEnd = hSyncStart + rinfo->hSync_width;
-
- vTotal = mode->yres + rinfo->vblank;
- vSyncStart = mode->yres + rinfo->vOver_plus;
- vSyncEnd = vSyncStart + rinfo->vSync_width;
- }
-
- sync = mode->sync;
- h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
- v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
-
- RTRACE("hStart = %d, hEnd = %d, hTotal = %d\n",
- hSyncStart, hSyncEnd, hTotal);
- RTRACE("vStart = %d, vEnd = %d, vTotal = %d\n",
- vSyncStart, vSyncEnd, vTotal);
-
- hsync_wid = (hSyncEnd - hSyncStart) / 8;
- vsync_wid = vSyncEnd - vSyncStart;
- if (hsync_wid == 0)
- hsync_wid = 1;
- else if (hsync_wid > 0x3f) /* max */
- hsync_wid = 0x3f;
-
- if (vsync_wid == 0)
- vsync_wid = 1;
- else if (vsync_wid > 0x1f) /* max */
- vsync_wid = 0x1f;
-
- hSyncPol = mode->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
- vSyncPol = mode->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
-
- cSync = mode->sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
-
- format = radeon_get_dstbpp(depth);
- bytpp = mode->bits_per_pixel >> 3;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD))
- hsync_fudge = hsync_fudge_fp[format-1];
- else
- hsync_fudge = hsync_adj_tab[format-1];
-
- hsync_start = hSyncStart - 8 + hsync_fudge;
-
- newmode.crtc_gen_cntl = CRTC_EXT_DISP_EN | CRTC_EN |
- (format << 8);
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- newmode.crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN;
- if (mirror)
- newmode.crtc_ext_cntl |= CRTC_CRT_ON;
-
- newmode.crtc_gen_cntl &= ~(CRTC_DBL_SCAN_EN |
- CRTC_INTERLACE_EN);
- } else {
- newmode.crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN |
- CRTC_CRT_ON;
- }
-
- newmode.dac_cntl = /* INREG(DAC_CNTL) | */ DAC_MASK_ALL | DAC_VGA_ADR_EN |
- DAC_8BIT_EN;
-
- newmode.crtc_h_total_disp = ((((hTotal / 8) - 1) & 0x3ff) |
- (((mode->xres / 8) - 1) << 16));
-
- newmode.crtc_h_sync_strt_wid = ((hsync_start & 0x1fff) |
- (hsync_wid << 16) | (h_sync_pol << 23));
-
- newmode.crtc_v_total_disp = ((vTotal - 1) & 0xffff) |
- ((mode->yres - 1) << 16);
-
- newmode.crtc_v_sync_strt_wid = (((vSyncStart - 1) & 0xfff) |
- (vsync_wid << 16) | (v_sync_pol << 23));
-
- if (accel) {
- /* We first calculate the engine pitch */
- rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f)
- & ~(0x3f)) >> 6;
-
- /* Then, re-multiply it to get the CRTC pitch */
- newmode.crtc_pitch = (rinfo->pitch << 3) / ((mode->bits_per_pixel + 1) / 8);
- } else
- newmode.crtc_pitch = (mode->xres_virtual >> 3);
- newmode.crtc_pitch |= (newmode.crtc_pitch << 16);
-
-#if defined(__BIG_ENDIAN)
- /*
- * It looks like recent chips have a problem with SURFACE_CNTL,
- * setting SURF_TRANSLATION_DIS completely disables the
- * swapper as well, so we leave it unset now.
- */
- newmode.surface_cntl = 0;
-
- /* Setup swapping on both apertures, though we currently
- * only use aperture 0, enabling swapper on aperture 1
- * won't harm
- */
- switch (mode->bits_per_pixel) {
- case 16:
- newmode.surface_cntl |= NONSURF_AP0_SWP_16BPP;
- newmode.surface_cntl |= NONSURF_AP1_SWP_16BPP;
- break;
- case 24:
- case 32:
- newmode.surface_cntl |= NONSURF_AP0_SWP_32BPP;
- newmode.surface_cntl |= NONSURF_AP1_SWP_32BPP;
- break;
- }
-#endif
-
- rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f)
- & ~(0x3f)) / 64;
-
- RTRACE("h_total_disp = 0x%x\t hsync_strt_wid = 0x%x\n",
- newmode.crtc_h_total_disp, newmode.crtc_h_sync_strt_wid);
- RTRACE("v_total_disp = 0x%x\t vsync_strt_wid = 0x%x\n",
- newmode.crtc_v_total_disp, newmode.crtc_v_sync_strt_wid);
-
- newmode.xres = mode->xres;
- newmode.yres = mode->yres;
-
- rinfo->bpp = mode->bits_per_pixel;
- rinfo->depth = depth;
-
- if (freq > rinfo->pll.ppll_max)
- freq = rinfo->pll.ppll_max;
- if (freq*12 < rinfo->pll.ppll_min)
- freq = rinfo->pll.ppll_min / 12;
-
- {
- struct {
- int divider;
- int bitvalue;
- } *post_div,
- post_divs[] = {
- { 1, 0 },
- { 2, 1 },
- { 4, 2 },
- { 8, 3 },
- { 3, 4 },
- { 16, 5 },
- { 6, 6 },
- { 12, 7 },
- { 0, 0 },
- };
-
- for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
- rinfo->pll_output_freq = post_div->divider * freq;
- if (rinfo->pll_output_freq >= rinfo->pll.ppll_min &&
- rinfo->pll_output_freq <= rinfo->pll.ppll_max)
- break;
- }
-
- rinfo->post_div = post_div->divider;
- rinfo->fb_div = round_div(rinfo->pll.ref_div*rinfo->pll_output_freq,
- rinfo->pll.ref_clk);
- newmode.ppll_ref_div = rinfo->pll.ref_div;
- newmode.ppll_div_3 = rinfo->fb_div | (post_div->bitvalue << 16);
- }
- newmode.vclk_ecp_cntl = rinfo->init_state.vclk_ecp_cntl;
-
-#ifdef CONFIG_PPC_OF
- /* Gross hack for iBook with M7 until I find out a proper fix */
- if (machine_is_compatible("PowerBook4,3") && rinfo->arch == RADEON_M7)
- newmode.ppll_div_3 = 0x000600ad;
-#endif /* CONFIG_PPC_OF */
-
- RTRACE("post div = 0x%x\n", rinfo->post_div);
- RTRACE("fb_div = 0x%x\n", rinfo->fb_div);
- RTRACE("ppll_div_3 = 0x%x\n", newmode.ppll_div_3);
-
- /* DDA */
- vclk_freq = round_div(rinfo->pll.ref_clk * rinfo->fb_div,
- rinfo->pll.ref_div * rinfo->post_div);
- xclk_freq = rinfo->pll.xclk;
-
- xclk_per_trans = round_div(xclk_freq * 128, vclk_freq * mode->bits_per_pixel);
-
- min_bits = min_bits_req(xclk_per_trans);
- useable_precision = min_bits + 1;
-
- xclk_per_trans_precise = round_div((xclk_freq * 128) << (11 - useable_precision),
- vclk_freq * mode->bits_per_pixel);
-
- ron = (4 * rinfo->ram.mb + 3 * _max(rinfo->ram.trcd - 2, 0) +
- 2 * rinfo->ram.trp + rinfo->ram.twr + rinfo->ram.cl + rinfo->ram.tr2w +
- xclk_per_trans) << (11 - useable_precision);
- roff = xclk_per_trans_precise * (32 - 4);
-
- RTRACE("ron = %d, roff = %d\n", ron, roff);
- RTRACE("vclk_freq = %d, per = %d\n", vclk_freq, xclk_per_trans_precise);
-
- if ((ron + rinfo->ram.rloop) >= roff) {
- printk("radeonfb: error ron out of range\n");
- return -EINVAL;
- }
-
- newmode.dda_config = (xclk_per_trans_precise |
- (useable_precision << 16) |
- (rinfo->ram.rloop << 20));
- newmode.dda_on_off = (ron << 16) | roff;
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- unsigned int hRatio, vRatio;
-
- /* We force the pixel clock to be always enabled. Allowing it
- * to be power managed during blanking would save power, but has
- * nasty interactions with the 2D engine & sleep code that haven't
- * been solved yet. --BenH
- */
- newmode.vclk_ecp_cntl &= ~PIXCLK_DAC_ALWAYS_ONb;
-
- if (mode->xres > rinfo->panel_xres)
- mode->xres = rinfo->panel_xres;
- if (mode->yres > rinfo->panel_yres)
- mode->yres = rinfo->panel_yres;
-
- newmode.fp_horz_stretch = (((rinfo->panel_xres / 8) - 1)
- << HORZ_PANEL_SHIFT);
- newmode.fp_vert_stretch = ((rinfo->panel_yres - 1)
- << VERT_PANEL_SHIFT);
-
- if (mode->xres != rinfo->panel_xres) {
- hRatio = round_div(mode->xres * HORZ_STRETCH_RATIO_MAX,
- rinfo->panel_xres);
- newmode.fp_horz_stretch = (((((unsigned long)hRatio) & HORZ_STRETCH_RATIO_MASK)) |
- (newmode.fp_horz_stretch &
- (HORZ_PANEL_SIZE | HORZ_FP_LOOP_STRETCH |
- HORZ_AUTO_RATIO_INC)));
- newmode.fp_horz_stretch |= (HORZ_STRETCH_BLEND |
- HORZ_STRETCH_ENABLE);
- }
- newmode.fp_horz_stretch &= ~HORZ_AUTO_RATIO;
-
- if (mode->yres != rinfo->panel_yres) {
- vRatio = round_div(mode->yres * VERT_STRETCH_RATIO_MAX,
- rinfo->panel_yres);
- newmode.fp_vert_stretch = (((((unsigned long)vRatio) & VERT_STRETCH_RATIO_MASK)) |
- (newmode.fp_vert_stretch &
- (VERT_PANEL_SIZE | VERT_STRETCH_RESERVED)));
- newmode.fp_vert_stretch |= (VERT_STRETCH_BLEND |
- VERT_STRETCH_ENABLE);
- }
- newmode.fp_vert_stretch &= ~VERT_AUTO_RATIO_EN;
-
- newmode.fp_gen_cntl = (rinfo->init_state.fp_gen_cntl & (u32)
- ~(FP_SEL_CRTC2 |
- FP_RMX_HVSYNC_CONTROL_EN |
- FP_DFP_SYNC_SEL |
- FP_CRT_SYNC_SEL |
- FP_CRTC_LOCK_8DOT |
- FP_USE_SHADOW_EN |
- FP_CRTC_USE_SHADOW_VEND |
- FP_CRT_SYNC_ALT));
-
- newmode.fp_gen_cntl |= (FP_CRTC_DONT_SHADOW_VPAR |
- FP_CRTC_DONT_SHADOW_HEND);
-
- newmode.lvds_gen_cntl = rinfo->init_state.lvds_gen_cntl;
- newmode.lvds_pll_cntl = rinfo->init_state.lvds_pll_cntl;
- newmode.tmds_crc = rinfo->init_state.tmds_crc;
- newmode.tmds_transmitter_cntl = rinfo->init_state.tmds_transmitter_cntl;
-
- if (primary_mon == MT_LCD) {
- newmode.lvds_gen_cntl |= (LVDS_ON | LVDS_BLON);
- newmode.fp_gen_cntl &= ~(FP_FPON | FP_TMDS_EN);
- } else {
- /* DFP */
- newmode.fp_gen_cntl |= (FP_FPON | FP_TMDS_EN);
- newmode.tmds_transmitter_cntl = (TMDS_RAN_PAT_RST |
- TMDS_ICHCSEL | TMDS_PLL_EN) &
- ~(TMDS_PLLRST);
- newmode.crtc_ext_cntl &= ~CRTC_CRT_ON;
- }
-
- newmode.fp_crtc_h_total_disp = (((rinfo->hblank / 8) & 0x3ff) |
- (((mode->xres / 8) - 1) << 16));
- newmode.fp_crtc_v_total_disp = (rinfo->vblank & 0xffff) |
- ((mode->yres - 1) << 16);
- newmode.fp_h_sync_strt_wid = ((rinfo->hOver_plus & 0x1fff) |
- (hsync_wid << 16) | (h_sync_pol << 23));
- newmode.fp_v_sync_strt_wid = ((rinfo->vOver_plus & 0xfff) |
- (vsync_wid << 16) | (v_sync_pol << 23));
- }
-
- /* do it! */
- if (!rinfo->asleep) {
- radeon_write_mode (rinfo, &newmode);
- /* (re)initialize the engine */
- if (noaccel)
- radeon_engine_init (rinfo);
-
- }
- /* Update fix */
- if (accel)
- info->fix.line_length = rinfo->pitch*64;
- else
- info->fix.line_length = mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8);
- info->fix.visual = rinfo->depth == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
-
-#ifdef CONFIG_BOOTX_TEXT
- /* Update debug text engine */
- btext_update_display(rinfo->fb_base_phys, mode->xres, mode->yres,
- rinfo->depth, info->fix.line_length);
-#endif
-
- return 0;
-}
-
-
-static void radeon_write_mode (struct radeonfb_info *rinfo,
- struct radeon_regs *mode)
-{
- int i;
- int primary_mon = PRIMARY_MONITOR(rinfo);
-
- radeonfb_blank(VESA_POWERDOWN, (struct fb_info *)rinfo);
-
-
- if (rinfo->arch == RADEON_M6) {
- for (i=0; i<7; i++)
- OUTREG(common_regs_m6[i].reg, common_regs_m6[i].val);
- } else {
- for (i=0; i<9; i++)
- OUTREG(common_regs[i].reg, common_regs[i].val);
- }
-
- OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl);
- OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl,
- CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS);
- OUTREGP(DAC_CNTL, mode->dac_cntl, DAC_RANGE_CNTL | DAC_BLANKING);
- OUTREG(CRTC_H_TOTAL_DISP, mode->crtc_h_total_disp);
- OUTREG(CRTC_H_SYNC_STRT_WID, mode->crtc_h_sync_strt_wid);
- OUTREG(CRTC_V_TOTAL_DISP, mode->crtc_v_total_disp);
- OUTREG(CRTC_V_SYNC_STRT_WID, mode->crtc_v_sync_strt_wid);
- OUTREG(CRTC_OFFSET, 0);
- OUTREG(CRTC_OFFSET_CNTL, 0);
- OUTREG(CRTC_PITCH, mode->crtc_pitch);
-
-#if defined(__BIG_ENDIAN)
- OUTREG(SURFACE_CNTL, mode->surface_cntl);
-#endif
-
- while ((INREG(CLOCK_CNTL_INDEX) & PPLL_DIV_SEL_MASK) !=
- PPLL_DIV_SEL_MASK) {
- OUTREGP(CLOCK_CNTL_INDEX, PPLL_DIV_SEL_MASK, 0xffff);
- }
-
- OUTPLLP(PPLL_CNTL, PPLL_RESET, 0xffff);
-
- while ((INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK) !=
- (mode->ppll_ref_div & PPLL_REF_DIV_MASK)) {
- OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, ~PPLL_REF_DIV_MASK);
- }
-
- while ((INPLL(PPLL_DIV_3) & PPLL_FB3_DIV_MASK) !=
- (mode->ppll_div_3 & PPLL_FB3_DIV_MASK)) {
- OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_FB3_DIV_MASK);
- }
-
- while ((INPLL(PPLL_DIV_3) & PPLL_POST3_DIV_MASK) !=
- (mode->ppll_div_3 & PPLL_POST3_DIV_MASK)) {
- OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_POST3_DIV_MASK);
- }
-
- OUTPLL(HTOTAL_CNTL, 0);
-
- OUTPLLP(PPLL_CNTL, 0, ~PPLL_RESET);
-
-// OUTREG(DDA_CONFIG, mode->dda_config);
-// OUTREG(DDA_ON_OFF, mode->dda_on_off);
-
- if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
- OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
- OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
- OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
- OUTREG(FP_V_SYNC_STRT_WID, mode->fp_v_sync_strt_wid);
- OUTREG(FP_HORZ_STRETCH, mode->fp_horz_stretch);
- OUTREG(FP_VERT_STRETCH, mode->fp_vert_stretch);
- OUTREG(FP_GEN_CNTL, mode->fp_gen_cntl);
- OUTREG(TMDS_CRC, mode->tmds_crc);
- OUTREG(TMDS_TRANSMITTER_CNTL, mode->tmds_transmitter_cntl);
-
- if (primary_mon == MT_LCD) {
- unsigned int tmp = INREG(LVDS_GEN_CNTL);
-
- mode->lvds_gen_cntl &= ~LVDS_STATE_MASK;
- mode->lvds_gen_cntl |= (rinfo->init_state.lvds_gen_cntl & LVDS_STATE_MASK);
-
- if ((tmp & (LVDS_ON | LVDS_BLON)) ==
- (mode->lvds_gen_cntl & (LVDS_ON | LVDS_BLON))) {
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- } else {
- if (mode->lvds_gen_cntl & (LVDS_ON | LVDS_BLON)) {
- udelay(1000);
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- } else {
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl |
- LVDS_BLON);
- udelay(1000);
- OUTREG(LVDS_GEN_CNTL, mode->lvds_gen_cntl);
- }
- }
- }
- }
-
- radeonfb_blank(VESA_NO_BLANKING, (struct fb_info *)rinfo);
-
- OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
-
- return;
-}
-
-static struct fb_ops radeonfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = radeonfb_check_var,
- .fb_set_par = radeonfb_set_par,
- .fb_setcolreg = radeonfb_setcolreg,
- .fb_pan_display = radeonfb_pan_display,
- .fb_blank = radeonfb_blank,
- .fb_ioctl = radeonfb_ioctl,
-#if 0
- .fb_fillrect = radeonfb_fillrect,
- .fb_copyarea = radeonfb_copyarea,
- .fb_imageblit = radeonfb_imageblit,
- .fb_rasterimg = radeonfb_rasterimg,
-#else
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-#endif
-};
-
-
-static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
-{
- struct fb_info *info;
-
- info = &rinfo->info;
-
- info->par = rinfo;
- info->pseudo_palette = rinfo->pseudo_palette;
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
- info->fbops = &radeonfb_ops;
- info->screen_base = rinfo->fb_base;
-
- /* Fill fix common fields */
- strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
- info->fix.smem_start = rinfo->fb_base_phys;
- info->fix.smem_len = rinfo->video_ram;
- info->fix.type = FB_TYPE_PACKED_PIXELS;
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- info->fix.xpanstep = 8;
- info->fix.ypanstep = 1;
- info->fix.ywrapstep = 0;
- info->fix.type_aux = 0;
- info->fix.mmio_start = rinfo->mmio_base_phys;
- info->fix.mmio_len = RADEON_REGSIZE;
- if (noaccel)
- info->fix.accel = FB_ACCEL_NONE;
- else
- info->fix.accel = FB_ACCEL_ATI_RADEON;
-
- if (radeon_init_disp (rinfo) < 0)
- return -1;
-
- return 0;
-}
-
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-
-/* TODO: Dbl check these tables, we don't go up to full ON backlight
- * in these, possibly because we noticed MacOS doesn't, but I'd prefer
- * having some more official numbers from ATI
- */
-static int backlight_conv_m6[] = {
- 0xff, 0xc0, 0xb5, 0xaa, 0x9f, 0x94, 0x89, 0x7e,
- 0x73, 0x68, 0x5d, 0x52, 0x47, 0x3c, 0x31, 0x24
-};
-static int backlight_conv_m7[] = {
- 0x00, 0x3f, 0x4a, 0x55, 0x60, 0x6b, 0x76, 0x81,
- 0x8c, 0x97, 0xa2, 0xad, 0xb8, 0xc3, 0xce, 0xd9
-};
-
-#define BACKLIGHT_LVDS_OFF
-#undef BACKLIGHT_DAC_OFF
-
-/* We turn off the LCD completely instead of just dimming the backlight.
- * This provides some greater power saving and the display is useless
- * without backlight anyway.
- */
-
-static int radeon_set_backlight_enable(int on, int level, void *data)
-{
- struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- unsigned int lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
- int* conv_table;
-
- /* Pardon me for that hack... maybe some day we can figure
- * out in what direction backlight should work on a given
- * panel ?
- */
- if ((rinfo->arch == RADEON_M7 || rinfo->arch == RADEON_M9)
- && !machine_is_compatible("PowerBook4,3"))
- conv_table = backlight_conv_m7;
- else
- conv_table = backlight_conv_m6;
-
- lvds_gen_cntl |= (LVDS_BL_MOD_EN | LVDS_BLON);
- if (on && (level > BACKLIGHT_OFF)) {
- lvds_gen_cntl |= LVDS_DIGON;
- if (!(lvds_gen_cntl & LVDS_ON)) {
- lvds_gen_cntl &= ~LVDS_BLON;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- (void)INREG(LVDS_GEN_CNTL);
- mdelay(10);
- lvds_gen_cntl |= LVDS_BLON;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- }
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[level] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= (LVDS_ON | LVDS_EN);
- lvds_gen_cntl &= ~LVDS_DISPLAY_DIS;
- } else {
- lvds_gen_cntl &= ~LVDS_BL_MOD_LEVEL_MASK;
- lvds_gen_cntl |= (conv_table[0] <<
- LVDS_BL_MOD_LEVEL_SHIFT);
- lvds_gen_cntl |= LVDS_DISPLAY_DIS;
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- udelay(10);
- lvds_gen_cntl &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGON);
- }
-
- OUTREG(LVDS_GEN_CNTL, lvds_gen_cntl);
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |= (lvds_gen_cntl & LVDS_STATE_MASK);
-
- return 0;
-}
-
-static int radeon_set_backlight_level(int level, void *data)
-{
- return radeon_set_backlight_enable(1, level, data);
-}
-#endif /* CONFIG_PMAC_BACKLIGHT */
-
-
-#ifdef CONFIG_PMAC_PBOOK
-
-static u32 dbg_clk;
-
-/*
- * Radeon M6 Power Management code. This code currently only supports
- * the mobile chips, it's based from some informations provided by ATI
- * along with hours of tracing of MacOS drivers
- */
-
-static void radeon_pm_save_regs(struct radeonfb_info *rinfo)
-{
- rinfo->save_regs[0] = INPLL(PLL_PWRMGT_CNTL);
- rinfo->save_regs[1] = INPLL(CLK_PWRMGT_CNTL);
- rinfo->save_regs[2] = INPLL(MCLK_CNTL);
- rinfo->save_regs[3] = INPLL(SCLK_CNTL);
- rinfo->save_regs[4] = INPLL(CLK_PIN_CNTL);
- rinfo->save_regs[5] = INPLL(VCLK_ECP_CNTL);
- rinfo->save_regs[6] = INPLL(PIXCLKS_CNTL);
- rinfo->save_regs[7] = INPLL(MCLK_MISC);
- rinfo->save_regs[8] = INPLL(P2PLL_CNTL);
-
- rinfo->save_regs[9] = INREG(DISP_MISC_CNTL);
- rinfo->save_regs[10] = INREG(DISP_PWR_MAN);
- rinfo->save_regs[11] = INREG(LVDS_GEN_CNTL);
- rinfo->save_regs[12] = INREG(LVDS_PLL_CNTL);
- rinfo->save_regs[13] = INREG(TV_DAC_CNTL);
- rinfo->save_regs[14] = INREG(BUS_CNTL1);
- rinfo->save_regs[15] = INREG(CRTC_OFFSET_CNTL);
- rinfo->save_regs[16] = INREG(AGP_CNTL);
- rinfo->save_regs[17] = (INREG(CRTC_GEN_CNTL) & 0xfdffffff) | 0x04000000;
- rinfo->save_regs[18] = (INREG(CRTC2_GEN_CNTL) & 0xfdffffff) | 0x04000000;
- rinfo->save_regs[19] = INREG(GPIOPAD_A);
- rinfo->save_regs[20] = INREG(GPIOPAD_EN);
- rinfo->save_regs[21] = INREG(GPIOPAD_MASK);
- rinfo->save_regs[22] = INREG(ZV_LCDPAD_A);
- rinfo->save_regs[23] = INREG(ZV_LCDPAD_EN);
- rinfo->save_regs[24] = INREG(ZV_LCDPAD_MASK);
- rinfo->save_regs[25] = INREG(GPIO_VGA_DDC);
- rinfo->save_regs[26] = INREG(GPIO_DVI_DDC);
- rinfo->save_regs[27] = INREG(GPIO_MONID);
- rinfo->save_regs[28] = INREG(GPIO_CRT2_DDC);
-
- rinfo->save_regs[29] = INREG(SURFACE_CNTL);
- rinfo->save_regs[30] = INREG(MC_FB_LOCATION);
- rinfo->save_regs[31] = INREG(DISPLAY_BASE_ADDR);
- rinfo->save_regs[32] = INREG(MC_AGP_LOCATION);
- rinfo->save_regs[33] = INREG(CRTC2_DISPLAY_BASE_ADDR);
-}
-
-static void radeon_pm_restore_regs(struct radeonfb_info *rinfo)
-{
- OUTPLL(P2PLL_CNTL, rinfo->save_regs[8] & 0xFFFFFFFE); /* First */
-
- OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]);
- OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]);
- OUTPLL(MCLK_CNTL, rinfo->save_regs[2]);
- OUTPLL(SCLK_CNTL, rinfo->save_regs[3]);
- OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]);
- OUTPLL(VCLK_ECP_CNTL, rinfo->save_regs[5]);
- OUTPLL(PIXCLKS_CNTL, rinfo->save_regs[6]);
- OUTPLL(MCLK_MISC, rinfo->save_regs[7]);
-
- OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
- OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
- OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11]);
- OUTREG(LVDS_PLL_CNTL,rinfo->save_regs[12]);
- OUTREG(TV_DAC_CNTL, rinfo->save_regs[13]);
- OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
- OUTREG(CRTC_OFFSET_CNTL, rinfo->save_regs[15]);
- OUTREG(AGP_CNTL, rinfo->save_regs[16]);
- OUTREG(CRTC_GEN_CNTL, rinfo->save_regs[17]);
- OUTREG(CRTC2_GEN_CNTL, rinfo->save_regs[18]);
-
- // wait VBL before that one ?
- OUTPLL(P2PLL_CNTL, rinfo->save_regs[8]);
-
- OUTREG(GPIOPAD_A, rinfo->save_regs[19]);
- OUTREG(GPIOPAD_EN, rinfo->save_regs[20]);
- OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]);
- OUTREG(ZV_LCDPAD_A, rinfo->save_regs[22]);
- OUTREG(ZV_LCDPAD_EN, rinfo->save_regs[23]);
- OUTREG(ZV_LCDPAD_MASK, rinfo->save_regs[24]);
- OUTREG(GPIO_VGA_DDC, rinfo->save_regs[25]);
- OUTREG(GPIO_DVI_DDC, rinfo->save_regs[26]);
- OUTREG(GPIO_MONID, rinfo->save_regs[27]);
- OUTREG(GPIO_CRT2_DDC, rinfo->save_regs[28]);
-}
-
-static void radeon_pm_disable_iopad(struct radeonfb_info *rinfo)
-{
- OUTREG(GPIOPAD_MASK, 0x0001ffff);
- OUTREG(GPIOPAD_EN, 0x00000400);
- OUTREG(GPIOPAD_A, 0x00000000);
- OUTREG(ZV_LCDPAD_MASK, 0x00000000);
- OUTREG(ZV_LCDPAD_EN, 0x00000000);
- OUTREG(ZV_LCDPAD_A, 0x00000000);
- OUTREG(GPIO_VGA_DDC, 0x00030000);
- OUTREG(GPIO_DVI_DDC, 0x00000000);
- OUTREG(GPIO_MONID, 0x00030000);
- OUTREG(GPIO_CRT2_DDC, 0x00000000);
-}
-
-static void radeon_pm_program_v2clk(struct radeonfb_info *rinfo)
-{
-//
-// u32 reg;
-//
-// OUTPLL(P2PLL_REF_DIV, 0x0c);
-//
-// .../... figure out what macos does here
-}
-
-static void radeon_pm_low_current(struct radeonfb_info *rinfo)
-{
- u32 reg;
-
- reg = INREG(BUS_CNTL1);
- reg &= ~BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK;
- reg |= BUS_CNTL1_AGPCLK_VALID | (1<<BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT);
- OUTREG(BUS_CNTL1, reg);
-
- reg = INPLL(PLL_PWRMGT_CNTL);
- reg |= PLL_PWRMGT_CNTL_SPLL_TURNOFF | PLL_PWRMGT_CNTL_PPLL_TURNOFF |
- PLL_PWRMGT_CNTL_P2PLL_TURNOFF | PLL_PWRMGT_CNTL_TVPLL_TURNOFF;
- reg &= ~PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK;
- reg &= ~PLL_PWRMGT_CNTL_MOBILE_SU;
- OUTPLL(PLL_PWRMGT_CNTL, reg);
-
-// reg = INPLL(TV_PLL_CNTL1);
-// reg |= TV_PLL_CNTL1__TVPLL_RESET | TV_PLL_CNTL1__TVPLL_SLEEP;
-// OUTPLL(TV_PLL_CNTL1, reg);
-
- reg = INREG(TV_DAC_CNTL);
- reg &= ~(TV_DAC_CNTL_BGADJ_MASK |TV_DAC_CNTL_DACADJ_MASK);
- reg |=TV_DAC_CNTL_BGSLEEP | TV_DAC_CNTL_RDACPD | TV_DAC_CNTL_GDACPD |
- TV_DAC_CNTL_BDACPD |
- (8<<TV_DAC_CNTL_BGADJ__SHIFT) | (8<<TV_DAC_CNTL_DACADJ__SHIFT);
- OUTREG(TV_DAC_CNTL, reg);
-
- reg = INREG(TMDS_TRANSMITTER_CNTL);
- reg &= ~(TMDS_PLL_EN |TMDS_PLLRST);
- OUTREG(TMDS_TRANSMITTER_CNTL, reg);
-
-// lvds_pll_cntl = regr32(g, LVDS_PLL_CNTL);
-// lvds_pll_cntl &= ~LVDS_PLL_CNTL__LVDS_PLL_EN;
-// lvds_pll_cntl |= LVDS_PLL_CNTL__LVDS_PLL_RESET;
-// regw32(g, LVDS_PLL_CNTL, lvds_pll_cntl);
-
- reg = INREG(DAC_CNTL);
- reg &= ~DAC_CMP_EN;
- OUTREG(DAC_CNTL, reg);
-
- reg = INREG(DAC_CNTL2);
- reg &= ~DAC2_CMP_EN;
- OUTREG(DAC_CNTL2, reg);
-
- reg = INREG(TV_DAC_CNTL);
- reg &= ~TV_DAC_CNTL_DETECT;
- OUTREG(TV_DAC_CNTL, reg);
-}
-
-static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
-{
- /* This code is disabled. It does what is in the pm_init
- * function of the MacOS driver code ATI sent me. However,
- * it doesn't fix my sleep problem, and is causing other issues
- * on wakeup (bascially the machine dying when switching consoles
- * I haven't had time to investigate this yet
- */
-#if 0
- u32 disp_misc_cntl;
- u32 disp_pwr_man;
- u32 temp;
-
- // set SPLL, MPLL, PPLL, P2PLL, TVPLL, SCLK, MCLK, PCLK, P2CLK,
- // TCLK and TEST_MODE to 0
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTPLL(CLK_PWRMGT_CNTL , temp & ~0xc00002ff);
-
- // Turn on Power Management
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTPLL(CLK_PWRMGT_CNTL , temp | 0x00000400);
-
- // Turn off display clock if using mobile chips
- temp = INPLL(CLK_PWRMGT_CNTL);
- OUTREG(CLK_PWRMGT_CNTL , temp | 0x00100000);
-
- // Force PIXCLK_ALWAYS_ON and PIXCLK_DAC_ALWAYS_ON
- temp = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, temp & ~0x000000c0);
-
- // Force ECP_FORCE_ON to 1
- temp = INPLL(VCLK_ECP_CNTL);
- OUTPLL(VCLK_ECP_CNTL, temp | 0x00040000);
-
- // Force PIXCLK_BLEND_ALWAYS_ON and PIXCLK_GV_ALWAYS_ON
- temp = INPLL(PIXCLKS_CNTL);
- OUTPLL(PIXCLKS_CNTL, temp & ~0x00001800);
-
- // Forcing SCLK_CNTL to ON
- OUTPLL(SCLK_CNTL, (INPLL(SCLK_CNTL)& 0x00000007) | 0xffff8000 );
-
- // Set PM control over XTALIN pad
- temp = INPLL(CLK_PIN_CNTL);
- OUTPLL(CLK_PIN_CNTL, temp | 0x00080000);
-
- // Force MCLK and YCLK and MC as dynamic
- temp = INPLL(MCLK_CNTL);
- OUTPLL(MCLK_CNTL, temp & 0xffeaffff);
-
- // PLL_TURNOFF
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp | 0x0000001f);
-
- // set MOBILE_SU to 1 if M6 or DDR64 is detected
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp | 0x00010000);
-
- // select PM access mode (PM_MODE_SEL) (use ACPI mode)
-// temp = INPLL(PLL_PWRMGT_CNTL);
-// OUTPLL(PLL_PWRMGT_CNTL, temp | 0x00002000);
- temp = INPLL(PLL_PWRMGT_CNTL);
- OUTPLL(PLL_PWRMGT_CNTL, temp & ~0x00002000);
-
- // set DISP_MISC_CNTL register
- disp_misc_cntl = INREG(DISP_MISC_CNTL);
- disp_misc_cntl &= ~( DISP_MISC_CNTL_SOFT_RESET_GRPH_PP |
- DISP_MISC_CNTL_SOFT_RESET_SUBPIC_PP |
- DISP_MISC_CNTL_SOFT_RESET_OV0_PP |
- DISP_MISC_CNTL_SOFT_RESET_GRPH_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_SUBPIC_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_OV0_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_GRPH2_PP |
- DISP_MISC_CNTL_SOFT_RESET_GRPH2_SCLK |
- DISP_MISC_CNTL_SOFT_RESET_LVDS |
- DISP_MISC_CNTL_SOFT_RESET_TMDS |
- DISP_MISC_CNTL_SOFT_RESET_DIG_TMDS |
- DISP_MISC_CNTL_SOFT_RESET_TV);
- OUTREG(DISP_MISC_CNTL, disp_misc_cntl);
-
- // set DISP_PWR_MAN register
- disp_pwr_man = INREG(DISP_PWR_MAN);
- // clau - 9.29.2000 - changes made to bit23:18 to set to 1 as requested by George
- disp_pwr_man |= (DISP_PWR_MAN_DIG_TMDS_ENABLE_RST |
- DISP_PWR_MAN_TV_ENABLE_RST |
- // DISP_PWR_MAN_AUTO_PWRUP_EN |
- DISP_PWR_MAN_DISP_D3_GRPH_RST |
- DISP_PWR_MAN_DISP_D3_SUBPIC_RST |
- DISP_PWR_MAN_DISP_D3_OV0_RST |
- DISP_PWR_MAN_DISP_D1D2_GRPH_RST |
- DISP_PWR_MAN_DISP_D1D2_SUBPIC_RST |
- DISP_PWR_MAN_DISP_D1D2_OV0_RST);
- disp_pwr_man &= ~(DISP_PWR_MAN_DISP_PWR_MAN_D3_CRTC_EN |
- DISP_PWR_MAN_DISP2_PWR_MAN_D3_CRTC2_EN|
- DISP_PWR_MAN_DISP_D3_RST |
- DISP_PWR_MAN_DISP_D3_REG_RST);
- OUTREG(DISP_PWR_MAN, disp_pwr_man);
-
- // clau - 10.24.2000
- // - add in setting for BUS_CNTL1 b27:26 = 0x01 and b31 = 0x1
- // - add in setting for AGP_CNTL b7:0 = 0x20
- // - add in setting for DVI_DDC_DATA_OUT_EN b17:16 = 0x0
-
- // the following settings (two lines) are applied at a later part of this function, only on mobile platform
- // requres -mobile flag
- OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & 0xf3ffffff) | 0x04000000);
- OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | 0x80000000);
- OUTREG(AGP_CNTL, (INREG(AGP_CNTL) & 0xffffff00) | 0x20);
- OUTREG(GPIO_DVI_DDC, INREG(GPIO_DVI_DDC) & 0xfffcffff);
-
- // yulee - 12.12.2000
- // A12 only
- // EN_MCLK_TRISTATE_IN_SUSPEND@MCLK_MISC = 1
- // ACCESS_REGS_IN_SUSPEND@CLK_PIN_CNTL = 0
- // only on mobile platform
- OUTPLL(MCLK_MISC, INPLL(MCLK_MISC) | 0x00040000 );
-
- // yulee -12.12.2000
- // AGPCLK_VALID@BUS_CNTL1 = 1
- // MOBILE_PLATFORM_SEL@BUS_CNTL1 = 01
- // CRTC_STEREO_SYNC_OUT_EN@CRTC_OFFSET_CNTL = 0
- // CG_CLK_TO_OUTPIN@CLK_PIN_CNTL = 0
- // only on mobile platform
- OUTPLL(CLK_PIN_CNTL, INPLL(CLK_PIN_CNTL ) & 0xFFFFF7FF );
- OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1 ) & 0xF3FFFFFF) | 0x84000000 );
- OUTREG(CRTC_OFFSET_CNTL, INREG(CRTC_OFFSET_CNTL ) & 0xFFEFFFFF );
-
- mdelay(100);
-#endif
-
- /* Disable CRTCs */
- OUTREG(CRTC_GEN_CNTL, (INREG(CRTC_GEN_CNTL) & ~CRTC_EN) | CRTC_DISP_REQ_EN_B);
- OUTREG(CRTC2_GEN_CNTL, (INREG(CRTC2_GEN_CNTL) & ~CRTC2_EN) | CRTC2_DISP_REQ_EN_B);
- (void)INREG(CRTC2_GEN_CNTL);
- mdelay(17);
-}
-
-static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
-{
- u16 pwr_cmd;
-
- if (!rinfo->pm_reg)
- return;
-
- /* Set the chip into appropriate suspend mode (we use D2,
- * D3 would require a compete re-initialization of the chip,
- * including PCI config registers, clocks, AGP conf, ...)
- */
- if (suspend) {
- /* According to ATI, we should program V2CLK here, I have
- * to verify what's up exactly
- */
- /* Save some registers */
- radeon_pm_save_regs(rinfo);
-
- /* Check that on M7 too, might work might not. M7 may also
- * need explicit enabling of PM
- */
- if (rinfo->arch == RADEON_M6) {
- /* Program V2CLK */
- radeon_pm_program_v2clk(rinfo);
-
- /* Disable IO PADs */
- radeon_pm_disable_iopad(rinfo);
-
- /* Set low current */
- radeon_pm_low_current(rinfo);
-
- /* Prepare chip for power management */
- radeon_pm_setup_for_suspend(rinfo);
-
- /* Reset the MDLL */
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) | MCKOA_RESET);
- (void)INPLL(MDLL_RDCKA);
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) & ~MCKOA_RESET);
- (void)INPLL(MDLL_RDCKA);
- }
-
- /* Switch PCI power managment to D2. */
- for (;;) {
- pci_read_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- &pwr_cmd);
- if (pwr_cmd & 2)
- break;
- pci_write_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
- mdelay(500);
- }
- } else {
- /* Switch back PCI powermanagment to D0 */
- mdelay(200);
- pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
- mdelay(500);
-
- dbg_clk = INPLL(1);
-
- /* Do we need that on M7 ? */
- if (rinfo->arch == RADEON_M6) {
- /* Restore the MDLL */
- OUTPLL(MDLL_CKO, INPLL(MDLL_CKO) & ~MCKOA_RESET);
- (void)INPLL(MDLL_CKO);
- }
-
- /* Restore some registers */
- radeon_pm_restore_regs(rinfo);
- }
-}
-
-/*
- * Save the contents of the framebuffer when we go to sleep,
- * and restore it when we wake up again.
- */
-
-int radeon_sleep_notify(struct pmu_sleep_notifier *self, int when)
-{
- struct radeonfb_info *rinfo;
-
- for (rinfo = board_list; rinfo != NULL; rinfo = rinfo->next) {
- struct fb_fix_screeninfo fix;
- int nb;
- struct display *disp;
-
- disp = (rinfo->currcon < 0) ? rinfo->info.disp : &fb_display[rinfo->currcon];
-
- switch (rinfo->arch) {
- case RADEON_M6:
- case RADEON_M7:
- case RADEON_M9:
- break;
- default:
- return PBOOK_SLEEP_REFUSE;
- }
-
- radeonfb_get_fix(&fix, fg_console, (struct fb_info *)rinfo);
- nb = fb_display[fg_console].var.yres * fix.line_length;
-
- switch (when) {
- case PBOOK_SLEEP_NOW:
- acquire_console_sem();
- disp->dispsw = &fbcon_dummy;
-
- if (!noaccel) {
- /* Make sure engine is reset */
- radeon_engine_reset();
- radeon_engine_idle();
- }
-
- /* Blank display and LCD */
- radeonfb_blank(VESA_POWERDOWN+1,
- (struct fb_info *)rinfo);
-
- /* Sleep */
- rinfo->asleep = 1;
- radeon_set_suspend(rinfo, 1);
- release_console_sem();
-
- break;
- case PBOOK_WAKE:
- acquire_console_sem();
- /* Wakeup */
- radeon_set_suspend(rinfo, 0);
-
- if (!noaccel)
- radeon_engine_init(rinfo);
- rinfo->asleep = 0;
- radeon_set_dispsw(rinfo, disp);
- radeon_load_video_mode(rinfo, &disp->var);
- do_install_cmap(rinfo->currcon < 0 ? 0 : rinfo->currcon,
- (struct fb_info *)rinfo);
-
- radeonfb_blank(0, (struct fb_info *)rinfo);
- release_console_sem();
- printk("CLK_PIN_CNTL on wakeup was: %08x\n", dbg_clk);
- break;
- }
- }
-
- return PBOOK_SLEEP_OK;
-}
-
-#endif /* CONFIG_PMAC_PBOOK */
-
-static int radeonfb_pci_register (struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct radeonfb_info *rinfo;
- struct radeon_chip_info *rci = &radeon_chip_info[ent->driver_data];
- u32 tmp;
-
- RTRACE("radeonfb_pci_register BEGIN\n");
-
- /* Enable device in PCI config */
- if (pci_enable_device(pdev) != 0) {
- printk(KERN_ERR "radeonfb: Cannot enable PCI device\n");
- return -ENODEV;
- }
-
- rinfo = kmalloc (sizeof (struct radeonfb_info), GFP_KERNEL);
- if (!rinfo) {
- printk ("radeonfb: could not allocate memory\n");
- return -ENODEV;
- }
-
- memset (rinfo, 0, sizeof (struct radeonfb_info));
- //info = &rinfo->info;
- rinfo->pdev = pdev;
- strcpy(rinfo->name, rci->name);
- rinfo->arch = rci->arch;
-
- /* Set base addrs */
- rinfo->fb_base_phys = pci_resource_start (pdev, 0);
- rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
-
- /* request the mem regions */
- if (!request_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0), "radeonfb")) {
- printk ("radeonfb: cannot reserve FB region\n");
- kfree (rinfo);
- return -ENODEV;
- }
-
- if (!request_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2), "radeonfb")) {
- printk ("radeonfb: cannot reserve MMIO region\n");
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- /* map the regions */
- rinfo->mmio_base = ioremap (rinfo->mmio_base_phys, RADEON_REGSIZE);
- if (!rinfo->mmio_base) {
- printk ("radeonfb: cannot map MMIO\n");
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- rinfo->chipset = pdev->device;
-
- switch (rinfo->arch) {
- case RADEON_R100:
- rinfo->hasCRTC2 = 0;
- break;
- default:
- /* all the rest have it */
- rinfo->hasCRTC2 = 1;
- break;
- }
-#if 0
- if (rinfo->arch == RADEON_M7) {
- /*
- * Noticed some errors in accel with M7, will have to work these out...
- */
- noaccel = 1;
- }
-#endif
- if (mirror)
- printk("radeonfb: mirroring display to CRT\n");
-
- /* framebuffer size */
- tmp = INREG(CONFIG_MEMSIZE);
-
- /* mem size is bits [28:0], mask off the rest */
- rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
-
- /* ram type */
- tmp = INREG(MEM_SDRAM_MODE_REG);
- switch ((MEM_CFG_TYPE & tmp) >> 30) {
- case 0:
- /* SDR SGRAM (2:1) */
- strcpy(rinfo->ram_type, "SDR SGRAM");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 4;
- rinfo->ram.trcd = 1;
- rinfo->ram.trp = 2;
- rinfo->ram.twr = 1;
- rinfo->ram.cl = 2;
- rinfo->ram.loop_latency = 16;
- rinfo->ram.rloop = 16;
-
- break;
- case 1:
- /* DDR SGRAM */
- strcpy(rinfo->ram_type, "DDR SGRAM");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 4;
- rinfo->ram.trcd = 3;
- rinfo->ram.trp = 3;
- rinfo->ram.twr = 2;
- rinfo->ram.cl = 3;
- rinfo->ram.tr2w = 1;
- rinfo->ram.loop_latency = 16;
- rinfo->ram.rloop = 16;
-
- break;
- default:
- /* 64-bit SDR SGRAM */
- strcpy(rinfo->ram_type, "SDR SGRAM 64");
- rinfo->ram.ml = 4;
- rinfo->ram.mb = 8;
- rinfo->ram.trcd = 3;
- rinfo->ram.trp = 3;
- rinfo->ram.twr = 1;
- rinfo->ram.cl = 3;
- rinfo->ram.tr2w = 1;
- rinfo->ram.loop_latency = 17;
- rinfo->ram.rloop = 17;
-
- break;
- }
-
- rinfo->bios_seg = radeon_find_rom(rinfo);
- radeon_get_pllinfo(rinfo, rinfo->bios_seg);
-
- /*
- * Hack to get around some busted production M6's
- * reporting no ram
- */
- if (rinfo->video_ram == 0) {
- switch (pdev->device) {
- case PCI_DEVICE_ID_ATI_RADEON_LY:
- case PCI_DEVICE_ID_ATI_RADEON_LZ:
- rinfo->video_ram = 8192 * 1024;
- break;
- default:
- break;
- }
- }
-
-
- RTRACE("radeonfb: probed %s %dk videoram\n", (rinfo->ram_type), (rinfo->video_ram/1024));
-
-#if !defined(__powerpc__)
- radeon_get_moninfo(rinfo);
-#else
- switch (pdev->device) {
- case PCI_DEVICE_ID_ATI_RADEON_LW:
- case PCI_DEVICE_ID_ATI_RADEON_LX:
- case PCI_DEVICE_ID_ATI_RADEON_LY:
- case PCI_DEVICE_ID_ATI_RADEON_LZ:
- rinfo->dviDisp_type = MT_LCD;
- break;
- default:
- radeon_get_moninfo(rinfo);
- break;
- }
-#endif
-
- radeon_get_EDID(rinfo);
-
- if ((rinfo->dviDisp_type == MT_DFP) || (rinfo->dviDisp_type == MT_LCD) ||
- (rinfo->crtDisp_type == MT_DFP)) {
- if (!radeon_get_dfpinfo(rinfo)) {
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
- }
-
- rinfo->fb_base = ioremap (rinfo->fb_base_phys, rinfo->video_ram);
- if (!rinfo->fb_base) {
- printk ("radeonfb: cannot map FB\n");
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
- /* I SHOULD FIX THAT CRAP ! I should probably mimmic XFree DRI
- * driver setup here.
- *
- * On PPC, OF based cards setup the internal memory
- * mapping in strange ways. We change it so that the
- * framebuffer is mapped at 0 and given half of the card's
- * address space (2Gb). AGP is mapped high (0xe0000000) and
- * can use up to 512Mb. Once DRI is fully implemented, we
- * will have to setup the PCI remapper to remap the agp_special_page
- * memory page somewhere between those regions so that the card
- * use a normal PCI bus master cycle to access the ring read ptr.
- * --BenH.
- */
-#ifdef CONFIG_ALL_PPC
- if (rinfo->hasCRTC2)
- OUTREG(CRTC2_GEN_CNTL,
- (INREG(CRTC2_GEN_CNTL) & ~CRTC2_EN) | CRTC2_DISP_REQ_EN_B);
- OUTREG(CRTC_EXT_CNTL, INREG(CRTC_EXT_CNTL) | CRTC_DISPLAY_DIS);
- OUTREG(MC_FB_LOCATION, 0x7fff0000);
- OUTREG(MC_AGP_LOCATION, 0xffffe000);
- OUTREG(DISPLAY_BASE_ADDR, 0x00000000);
- if (rinfo->hasCRTC2)
- OUTREG(CRTC2_DISPLAY_BASE_ADDR, 0x00000000);
- OUTREG(SRC_OFFSET, 0x00000000);
- OUTREG(DST_OFFSET, 0x00000000);
- mdelay(10);
- OUTREG(CRTC_EXT_CNTL, INREG(CRTC_EXT_CNTL) & ~CRTC_DISPLAY_DIS);
-#endif /* CONFIG_ALL_PPC */
-
- /* save current mode regs before we switch into the new one
- * so we can restore this upon __exit
- */
- radeon_save_state (rinfo, &rinfo->init_state);
-
- /* set all the vital stuff */
- radeon_set_fbinfo (rinfo);
-
- pci_set_drvdata(pdev, rinfo);
- rinfo->next = board_list;
- board_list = rinfo;
- ((struct fb_info *) rinfo)->device = &pdev->dev;
- if (register_framebuffer ((struct fb_info *) rinfo) < 0) {
- printk ("radeonfb: could not register framebuffer\n");
- iounmap(rinfo->fb_base);
- iounmap(rinfo->mmio_base);
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
- kfree (rinfo);
- return -ENODEV;
- }
-
-#ifdef CONFIG_MTRR
- rinfo->mtrr_hdl = nomtrr ? -1 : mtrr_add(rinfo->fb_base_phys,
- rinfo->video_ram,
- MTRR_TYPE_WRCOMB, 1);
-#endif
-
-#ifdef CONFIG_PMAC_BACKLIGHT
- if (rinfo->dviDisp_type == MT_LCD)
- register_backlight_controller(&radeon_backlight_controller,
- rinfo, "ati");
-#endif
-
-#ifdef CONFIG_PMAC_PBOOK
- if (rinfo->dviDisp_type == MT_LCD) {
- rinfo->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
- pmu_register_sleep_notifier(&radeon_sleep_notifier);
- }
-#endif
-
- printk ("radeonfb: ATI Radeon %s %s %d MB\n", rinfo->name, rinfo->ram_type,
- (rinfo->video_ram/(1024*1024)));
-
- if (rinfo->hasCRTC2) {
- printk("radeonfb: DVI port %s monitor connected\n",
- GET_MON_NAME(rinfo->dviDisp_type));
- printk("radeonfb: CRT port %s monitor connected\n",
- GET_MON_NAME(rinfo->crtDisp_type));
- } else {
- printk("radeonfb: CRT port %s monitor connected\n",
- GET_MON_NAME(rinfo->crtDisp_type));
- }
-
- RTRACE("radeonfb_pci_register END\n");
-
- return 0;
-}
-
-
-
-static void __devexit radeonfb_pci_unregister (struct pci_dev *pdev)
-{
- struct radeonfb_info *rinfo = pci_get_drvdata(pdev);
-
- if (!rinfo)
- return;
-
- /* restore original state
- *
- * Doesn't quite work yet, possibly because of the PPC hacking
- * I do on startup, disable for now. --BenH
- */
- radeon_write_mode (rinfo, &rinfo->init_state);
-
-#ifdef CONFIG_MTRR
- if (rinfo->mtrr_hdl >= 0)
- mtrr_del(rinfo->mtrr_hdl, 0, 0);
-#endif
-
- unregister_framebuffer ((struct fb_info *) rinfo);
-
- iounmap(rinfo->mmio_base);
- iounmap(rinfo->fb_base);
-
- release_mem_region (rinfo->mmio_base_phys,
- pci_resource_len(pdev, 2));
- release_mem_region (rinfo->fb_base_phys,
- pci_resource_len(pdev, 0));
-
- kfree (rinfo);
-}
-
-
-static struct pci_driver radeonfb_driver = {
- .name = "radeonfb",
- .id_table = radeonfb_pci_table,
- .probe = radeonfb_pci_register,
- .remove = __devexit_p(radeonfb_pci_unregister),
-};
-
-#ifndef MODULE
-static int __init radeonfb_old_setup (char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return 0;
-
- while ((this_opt = strsep (&options, ",")) != NULL) {
- if (!*this_opt)
- continue;
- if (!strncmp(this_opt, "noaccel", 7)) {
- noaccel = 1;
- } else if (!strncmp(this_opt, "mirror", 6)) {
- mirror = 1;
- } else if (!strncmp(this_opt, "dfp", 3)) {
- force_dfp = 1;
- } else if (!strncmp(this_opt, "panel_yres:", 11)) {
- panel_yres = simple_strtoul((this_opt+11), NULL, 0);
- } else if (!strncmp(this_opt, "nomtrr", 6)) {
- nomtrr = 1;
- } else
- mode_option = this_opt;
- }
-
- return 0;
-}
-#endif /* MODULE */
-
-static int __init radeonfb_old_init (void)
-{
-#ifndef MODULE
- char *option = NULL;
-
- if (fb_get_options("radeonfb_old", &option))
- return -ENODEV;
- radeonfb_old_setup(option);
-#endif
- return pci_register_driver (&radeonfb_driver);
-}
-
-
-static void __exit radeonfb_old_exit (void)
-{
- pci_unregister_driver (&radeonfb_driver);
-}
-
-module_init(radeonfb_old_init);
-module_exit(radeonfb_old_exit);
-
-
-MODULE_AUTHOR("Ani Joshi");
-MODULE_DESCRIPTION("framebuffer driver for ATI Radeon chipset");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 8d5f356..4a292aa 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1378,7 +1378,7 @@
int i;
if (!options || !*options)
- return 0;
+ return 1;
if (strncmp(options, "off", 3) == 0) {
stifb_disabled = 1;
@@ -1393,7 +1393,7 @@
stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
}
}
- return 0;
+ return 1;
}
__setup("stifb=", stifb_setup);
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index f6e24ee..5fc86ea 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -4,8 +4,9 @@
* Frame Buffer Device for ATI Imageon w100 (Wallaby)
*
* Copyright (C) 2002, ATI Corp.
- * Copyright (C) 2004-2005 Richard Purdie
+ * Copyright (C) 2004-2006 Richard Purdie
* Copyright (c) 2005 Ian Molton
+ * Copyright (c) 2006 Alberto Mardegan
*
* Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
*
@@ -14,6 +15,9 @@
*
* w32xx support by Ian Molton
*
+ * Hardware acceleration support by Alberto Mardegan
+ * <mardy@users.sourceforge.net>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -47,6 +51,7 @@
static void w100_update_enable(void);
static void w100_update_disable(void);
static void calc_hsync(struct w100fb_par *par);
+static void w100_init_graphic_engine(struct w100fb_par *par);
struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
/* Pseudo palette size */
@@ -248,6 +253,152 @@
}
+static void w100_fifo_wait(int entries)
+{
+ union rbbm_status_u status;
+ int i;
+
+ for (i = 0; i < 2000000; i++) {
+ status.val = readl(remapped_regs + mmRBBM_STATUS);
+ if (status.f.cmdfifo_avail >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "w100fb: FIFO Timeout!\n");
+}
+
+
+static int w100fb_sync(struct fb_info *info)
+{
+ union rbbm_status_u status;
+ int i;
+
+ for (i = 0; i < 2000000; i++) {
+ status.val = readl(remapped_regs + mmRBBM_STATUS);
+ if (!status.f.gui_active)
+ return 0;
+ udelay(1);
+ }
+ printk(KERN_ERR "w100fb: Graphic engine timeout!\n");
+ return -EBUSY;
+}
+
+
+static void w100_init_graphic_engine(struct w100fb_par *par)
+{
+ union dp_gui_master_cntl_u gmc;
+ union dp_mix_u dp_mix;
+ union dp_datatype_u dp_datatype;
+ union dp_cntl_u dp_cntl;
+
+ w100_fifo_wait(4);
+ writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET);
+ writel(par->xres, remapped_regs + mmDST_PITCH);
+ writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET);
+ writel(par->xres, remapped_regs + mmSRC_PITCH);
+
+ w100_fifo_wait(3);
+ writel(0, remapped_regs + mmSC_TOP_LEFT);
+ writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT);
+ writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT);
+
+ w100_fifo_wait(4);
+ dp_cntl.val = 0;
+ dp_cntl.f.dst_x_dir = 1;
+ dp_cntl.f.dst_y_dir = 1;
+ dp_cntl.f.src_x_dir = 1;
+ dp_cntl.f.src_y_dir = 1;
+ dp_cntl.f.dst_major_x = 1;
+ dp_cntl.f.src_major_x = 1;
+ writel(dp_cntl.val, remapped_regs + mmDP_CNTL);
+
+ gmc.val = 0;
+ gmc.f.gmc_src_pitch_offset_cntl = 1;
+ gmc.f.gmc_dst_pitch_offset_cntl = 1;
+ gmc.f.gmc_src_clipping = 1;
+ gmc.f.gmc_dst_clipping = 1;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+ gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */
+ gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST;
+ gmc.f.gmc_byte_pix_order = 1;
+ gmc.f.gmc_default_sel = 0;
+ gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+ gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR;
+ gmc.f.gmc_clr_cmp_fcn_dis = 1;
+ gmc.f.gmc_wr_msk_dis = 1;
+ gmc.f.gmc_dp_op = DP_OP_ROP;
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+ dp_datatype.val = dp_mix.val = 0;
+ dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype;
+ dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype;
+ dp_datatype.f.dp_src2_type = 0;
+ dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype;
+ dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype;
+ dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order;
+ writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE);
+
+ dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source;
+ dp_mix.f.dp_src2_source = 1;
+ dp_mix.f.dp_rop3 = gmc.f.gmc_rop3;
+ dp_mix.f.dp_op = gmc.f.gmc_dp_op;
+ writel(dp_mix.val, remapped_regs + mmDP_MIX);
+}
+
+
+static void w100fb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ union dp_gui_master_cntl_u gmc;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+
+ gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+ gmc.f.gmc_rop3 = ROP3_PATCOPY;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR;
+ w100_fifo_wait(2);
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+ writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR);
+
+ w100_fifo_wait(2);
+ writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X);
+ writel((rect->width << 16) | (rect->height & 0xffff),
+ remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
+static void w100fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
+ u32 h = area->height, w = area->width;
+ union dp_gui_master_cntl_u gmc;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ cfb_copyarea(info, area);
+ return;
+ }
+
+ gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+ gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+ gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+ w100_fifo_wait(1);
+ writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+ w100_fifo_wait(3);
+ writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X);
+ writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X);
+ writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
/*
* Change the resolution by calling the appropriate hardware functions
*/
@@ -265,6 +416,7 @@
w100_init_lcd(par);
w100_set_dispregs(par);
w100_update_enable();
+ w100_init_graphic_engine(par);
calc_hsync(par);
@@ -394,9 +546,10 @@
.fb_set_par = w100fb_set_par,
.fb_setcolreg = w100fb_setcolreg,
.fb_blank = w100fb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
+ .fb_fillrect = w100fb_fillrect,
+ .fb_copyarea = w100fb_copyarea,
.fb_imageblit = cfb_imageblit,
+ .fb_sync = w100fb_sync,
};
#ifdef CONFIG_PM
@@ -543,7 +696,8 @@
}
info->fbops = &w100fb_ops;
- info->flags = FBINFO_DEFAULT;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_FILLRECT;
info->node = -1;
info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
info->screen_size = REMAPPED_FB_LEN;
diff --git a/drivers/video/w100fb.h b/drivers/video/w100fb.h
index 7a58a1e..fffae7b 100644
--- a/drivers/video/w100fb.h
+++ b/drivers/video/w100fb.h
@@ -122,15 +122,32 @@
/* Block DISPLAY End: */
/* Block GFX Start: */
+#define mmDST_OFFSET 0x1004
+#define mmDST_PITCH 0x1008
+#define mmDST_Y_X 0x1038
+#define mmDST_WIDTH_HEIGHT 0x1198
+#define mmDP_GUI_MASTER_CNTL 0x106C
#define mmBRUSH_OFFSET 0x108C
#define mmBRUSH_Y_X 0x1074
+#define mmDP_BRUSH_FRGD_CLR 0x107C
+#define mmSRC_OFFSET 0x11AC
+#define mmSRC_PITCH 0x11B0
+#define mmSRC_Y_X 0x1034
#define mmDEFAULT_PITCH_OFFSET 0x10A0
#define mmDEFAULT_SC_BOTTOM_RIGHT 0x10A8
#define mmDEFAULT2_SC_BOTTOM_RIGHT 0x10AC
+#define mmSC_TOP_LEFT 0x11BC
+#define mmSC_BOTTOM_RIGHT 0x11C0
+#define mmSRC_SC_BOTTOM_RIGHT 0x11C4
#define mmGLOBAL_ALPHA 0x1210
#define mmFILTER_COEF 0x1214
#define mmMVC_CNTL_START 0x11E0
#define mmE2_ARITHMETIC_CNTL 0x1220
+#define mmDP_CNTL 0x11C8
+#define mmDP_CNTL_DST_DIR 0x11CC
+#define mmDP_DATATYPE 0x12C4
+#define mmDP_MIX 0x12C8
+#define mmDP_WRITE_MSK 0x12CC
#define mmENG_CNTL 0x13E8
#define mmENG_PERF_CNT 0x13F0
/* Block GFX End: */
@@ -179,6 +196,7 @@
/* Block RBBM Start: */
#define mmWAIT_UNTIL 0x1400
#define mmISYNC_CNTL 0x1404
+#define mmRBBM_STATUS 0x0140
#define mmRBBM_CNTL 0x0144
#define mmNQWAIT_UNTIL 0x0150
/* Block RBBM End: */
@@ -225,147 +243,147 @@
/* Register structure definitions */
struct wrap_top_dir_t {
- unsigned long top_addr : 23;
- unsigned long : 9;
+ u32 top_addr : 23;
+ u32 : 9;
} __attribute__((packed));
union wrap_top_dir_u {
- unsigned long val : 32;
+ u32 val : 32;
struct wrap_top_dir_t f;
} __attribute__((packed));
struct wrap_start_dir_t {
- unsigned long start_addr : 23;
- unsigned long : 9;
+ u32 start_addr : 23;
+ u32 : 9;
} __attribute__((packed));
union wrap_start_dir_u {
- unsigned long val : 32;
+ u32 val : 32;
struct wrap_start_dir_t f;
} __attribute__((packed));
struct cif_cntl_t {
- unsigned long swap_reg : 2;
- unsigned long swap_fbuf_1 : 2;
- unsigned long swap_fbuf_2 : 2;
- unsigned long swap_fbuf_3 : 2;
- unsigned long pmi_int_disable : 1;
- unsigned long pmi_schmen_disable : 1;
- unsigned long intb_oe : 1;
- unsigned long en_wait_to_compensate_dq_prop_dly : 1;
- unsigned long compensate_wait_rd_size : 2;
- unsigned long wait_asserted_timeout_val : 2;
- unsigned long wait_masked_val : 2;
- unsigned long en_wait_timeout : 1;
- unsigned long en_one_clk_setup_before_wait : 1;
- unsigned long interrupt_active_high : 1;
- unsigned long en_overwrite_straps : 1;
- unsigned long strap_wait_active_hi : 1;
- unsigned long lat_busy_count : 2;
- unsigned long lat_rd_pm4_sclk_busy : 1;
- unsigned long dis_system_bits : 1;
- unsigned long dis_mr : 1;
- unsigned long cif_spare_1 : 4;
+ u32 swap_reg : 2;
+ u32 swap_fbuf_1 : 2;
+ u32 swap_fbuf_2 : 2;
+ u32 swap_fbuf_3 : 2;
+ u32 pmi_int_disable : 1;
+ u32 pmi_schmen_disable : 1;
+ u32 intb_oe : 1;
+ u32 en_wait_to_compensate_dq_prop_dly : 1;
+ u32 compensate_wait_rd_size : 2;
+ u32 wait_asserted_timeout_val : 2;
+ u32 wait_masked_val : 2;
+ u32 en_wait_timeout : 1;
+ u32 en_one_clk_setup_before_wait : 1;
+ u32 interrupt_active_high : 1;
+ u32 en_overwrite_straps : 1;
+ u32 strap_wait_active_hi : 1;
+ u32 lat_busy_count : 2;
+ u32 lat_rd_pm4_sclk_busy : 1;
+ u32 dis_system_bits : 1;
+ u32 dis_mr : 1;
+ u32 cif_spare_1 : 4;
} __attribute__((packed));
union cif_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_cntl_t f;
} __attribute__((packed));
struct cfgreg_base_t {
- unsigned long cfgreg_base : 24;
- unsigned long : 8;
+ u32 cfgreg_base : 24;
+ u32 : 8;
} __attribute__((packed));
union cfgreg_base_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cfgreg_base_t f;
} __attribute__((packed));
struct cif_io_t {
- unsigned long dq_srp : 1;
- unsigned long dq_srn : 1;
- unsigned long dq_sp : 4;
- unsigned long dq_sn : 4;
- unsigned long waitb_srp : 1;
- unsigned long waitb_srn : 1;
- unsigned long waitb_sp : 4;
- unsigned long waitb_sn : 4;
- unsigned long intb_srp : 1;
- unsigned long intb_srn : 1;
- unsigned long intb_sp : 4;
- unsigned long intb_sn : 4;
- unsigned long : 2;
+ u32 dq_srp : 1;
+ u32 dq_srn : 1;
+ u32 dq_sp : 4;
+ u32 dq_sn : 4;
+ u32 waitb_srp : 1;
+ u32 waitb_srn : 1;
+ u32 waitb_sp : 4;
+ u32 waitb_sn : 4;
+ u32 intb_srp : 1;
+ u32 intb_srn : 1;
+ u32 intb_sp : 4;
+ u32 intb_sn : 4;
+ u32 : 2;
} __attribute__((packed));
union cif_io_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_io_t f;
} __attribute__((packed));
struct cif_read_dbg_t {
- unsigned long unpacker_pre_fetch_trig_gen : 2;
- unsigned long dly_second_rd_fetch_trig : 1;
- unsigned long rst_rd_burst_id : 1;
- unsigned long dis_rd_burst_id : 1;
- unsigned long en_block_rd_when_packer_is_not_emp : 1;
- unsigned long dis_pre_fetch_cntl_sm : 1;
- unsigned long rbbm_chrncy_dis : 1;
- unsigned long rbbm_rd_after_wr_lat : 2;
- unsigned long dis_be_during_rd : 1;
- unsigned long one_clk_invalidate_pulse : 1;
- unsigned long dis_chnl_priority : 1;
- unsigned long rst_read_path_a_pls : 1;
- unsigned long rst_read_path_b_pls : 1;
- unsigned long dis_reg_rd_fetch_trig : 1;
- unsigned long dis_rd_fetch_trig_from_ind_addr : 1;
- unsigned long dis_rd_same_byte_to_trig_fetch : 1;
- unsigned long dis_dir_wrap : 1;
- unsigned long dis_ring_buf_to_force_dec : 1;
- unsigned long dis_addr_comp_in_16bit : 1;
- unsigned long clr_w : 1;
- unsigned long err_rd_tag_is_3 : 1;
- unsigned long err_load_when_ful_a : 1;
- unsigned long err_load_when_ful_b : 1;
- unsigned long : 7;
+ u32 unpacker_pre_fetch_trig_gen : 2;
+ u32 dly_second_rd_fetch_trig : 1;
+ u32 rst_rd_burst_id : 1;
+ u32 dis_rd_burst_id : 1;
+ u32 en_block_rd_when_packer_is_not_emp : 1;
+ u32 dis_pre_fetch_cntl_sm : 1;
+ u32 rbbm_chrncy_dis : 1;
+ u32 rbbm_rd_after_wr_lat : 2;
+ u32 dis_be_during_rd : 1;
+ u32 one_clk_invalidate_pulse : 1;
+ u32 dis_chnl_priority : 1;
+ u32 rst_read_path_a_pls : 1;
+ u32 rst_read_path_b_pls : 1;
+ u32 dis_reg_rd_fetch_trig : 1;
+ u32 dis_rd_fetch_trig_from_ind_addr : 1;
+ u32 dis_rd_same_byte_to_trig_fetch : 1;
+ u32 dis_dir_wrap : 1;
+ u32 dis_ring_buf_to_force_dec : 1;
+ u32 dis_addr_comp_in_16bit : 1;
+ u32 clr_w : 1;
+ u32 err_rd_tag_is_3 : 1;
+ u32 err_load_when_ful_a : 1;
+ u32 err_load_when_ful_b : 1;
+ u32 : 7;
} __attribute__((packed));
union cif_read_dbg_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_read_dbg_t f;
} __attribute__((packed));
struct cif_write_dbg_t {
- unsigned long packer_timeout_count : 2;
- unsigned long en_upper_load_cond : 1;
- unsigned long en_chnl_change_cond : 1;
- unsigned long dis_addr_comp_cond : 1;
- unsigned long dis_load_same_byte_addr_cond : 1;
- unsigned long dis_timeout_cond : 1;
- unsigned long dis_timeout_during_rbbm : 1;
- unsigned long dis_packer_ful_during_rbbm_timeout : 1;
- unsigned long en_dword_split_to_rbbm : 1;
- unsigned long en_dummy_val : 1;
- unsigned long dummy_val_sel : 1;
- unsigned long mask_pm4_wrptr_dec : 1;
- unsigned long dis_mc_clean_cond : 1;
- unsigned long err_two_reqi_during_ful : 1;
- unsigned long err_reqi_during_idle_clk : 1;
- unsigned long err_global : 1;
- unsigned long en_wr_buf_dbg_load : 1;
- unsigned long en_wr_buf_dbg_path : 1;
- unsigned long sel_wr_buf_byte : 3;
- unsigned long dis_rd_flush_wr : 1;
- unsigned long dis_packer_ful_cond : 1;
- unsigned long dis_invalidate_by_ops_chnl : 1;
- unsigned long en_halt_when_reqi_err : 1;
- unsigned long cif_spare_2 : 5;
- unsigned long : 1;
+ u32 packer_timeout_count : 2;
+ u32 en_upper_load_cond : 1;
+ u32 en_chnl_change_cond : 1;
+ u32 dis_addr_comp_cond : 1;
+ u32 dis_load_same_byte_addr_cond : 1;
+ u32 dis_timeout_cond : 1;
+ u32 dis_timeout_during_rbbm : 1;
+ u32 dis_packer_ful_during_rbbm_timeout : 1;
+ u32 en_dword_split_to_rbbm : 1;
+ u32 en_dummy_val : 1;
+ u32 dummy_val_sel : 1;
+ u32 mask_pm4_wrptr_dec : 1;
+ u32 dis_mc_clean_cond : 1;
+ u32 err_two_reqi_during_ful : 1;
+ u32 err_reqi_during_idle_clk : 1;
+ u32 err_global : 1;
+ u32 en_wr_buf_dbg_load : 1;
+ u32 en_wr_buf_dbg_path : 1;
+ u32 sel_wr_buf_byte : 3;
+ u32 dis_rd_flush_wr : 1;
+ u32 dis_packer_ful_cond : 1;
+ u32 dis_invalidate_by_ops_chnl : 1;
+ u32 en_halt_when_reqi_err : 1;
+ u32 cif_spare_2 : 5;
+ u32 : 1;
} __attribute__((packed));
union cif_write_dbg_u {
- unsigned long val : 32;
+ u32 val : 32;
struct cif_write_dbg_t f;
} __attribute__((packed));
@@ -403,327 +421,327 @@
} __attribute__((packed));
struct crtc_total_t {
- unsigned long crtc_h_total : 10;
- unsigned long : 6;
- unsigned long crtc_v_total : 10;
- unsigned long : 6;
+ u32 crtc_h_total : 10;
+ u32 : 6;
+ u32 crtc_v_total : 10;
+ u32 : 6;
} __attribute__((packed));
union crtc_total_u {
- unsigned long val : 32;
+ u32 val : 32;
struct crtc_total_t f;
} __attribute__((packed));
struct crtc_ss_t {
- unsigned long ss_start : 10;
- unsigned long : 6;
- unsigned long ss_end : 10;
- unsigned long : 2;
- unsigned long ss_align : 1;
- unsigned long ss_pol : 1;
- unsigned long ss_run_mode : 1;
- unsigned long ss_en : 1;
+ u32 ss_start : 10;
+ u32 : 6;
+ u32 ss_end : 10;
+ u32 : 2;
+ u32 ss_align : 1;
+ u32 ss_pol : 1;
+ u32 ss_run_mode : 1;
+ u32 ss_en : 1;
} __attribute__((packed));
union crtc_ss_u {
- unsigned long val : 32;
+ u32 val : 32;
struct crtc_ss_t f;
} __attribute__((packed));
struct active_h_disp_t {
- unsigned long active_h_start : 10;
- unsigned long : 6;
- unsigned long active_h_end : 10;
- unsigned long : 6;
+ u32 active_h_start : 10;
+ u32 : 6;
+ u32 active_h_end : 10;
+ u32 : 6;
} __attribute__((packed));
union active_h_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct active_h_disp_t f;
} __attribute__((packed));
struct active_v_disp_t {
- unsigned long active_v_start : 10;
- unsigned long : 6;
- unsigned long active_v_end : 10;
- unsigned long : 6;
+ u32 active_v_start : 10;
+ u32 : 6;
+ u32 active_v_end : 10;
+ u32 : 6;
} __attribute__((packed));
union active_v_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct active_v_disp_t f;
} __attribute__((packed));
struct graphic_h_disp_t {
- unsigned long graphic_h_start : 10;
- unsigned long : 6;
- unsigned long graphic_h_end : 10;
- unsigned long : 6;
+ u32 graphic_h_start : 10;
+ u32 : 6;
+ u32 graphic_h_end : 10;
+ u32 : 6;
} __attribute__((packed));
union graphic_h_disp_u {
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_h_disp_t f;
} __attribute__((packed));
struct graphic_v_disp_t {
- unsigned long graphic_v_start : 10;
- unsigned long : 6;
- unsigned long graphic_v_end : 10;
- unsigned long : 6;
+ u32 graphic_v_start : 10;
+ u32 : 6;
+ u32 graphic_v_end : 10;
+ u32 : 6;
} __attribute__((packed));
union graphic_v_disp_u{
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_v_disp_t f;
} __attribute__((packed));
struct graphic_ctrl_t_w100 {
- unsigned long color_depth : 3;
- unsigned long portrait_mode : 2;
- unsigned long low_power_on : 1;
- unsigned long req_freq : 4;
- unsigned long en_crtc : 1;
- unsigned long en_graphic_req : 1;
- unsigned long en_graphic_crtc : 1;
- unsigned long total_req_graphic : 9;
- unsigned long lcd_pclk_on : 1;
- unsigned long lcd_sclk_on : 1;
- unsigned long pclk_running : 1;
- unsigned long sclk_running : 1;
- unsigned long : 6;
+ u32 color_depth : 3;
+ u32 portrait_mode : 2;
+ u32 low_power_on : 1;
+ u32 req_freq : 4;
+ u32 en_crtc : 1;
+ u32 en_graphic_req : 1;
+ u32 en_graphic_crtc : 1;
+ u32 total_req_graphic : 9;
+ u32 lcd_pclk_on : 1;
+ u32 lcd_sclk_on : 1;
+ u32 pclk_running : 1;
+ u32 sclk_running : 1;
+ u32 : 6;
} __attribute__((packed));
struct graphic_ctrl_t_w32xx {
- unsigned long color_depth : 3;
- unsigned long portrait_mode : 2;
- unsigned long low_power_on : 1;
- unsigned long req_freq : 4;
- unsigned long en_crtc : 1;
- unsigned long en_graphic_req : 1;
- unsigned long en_graphic_crtc : 1;
- unsigned long total_req_graphic : 10;
- unsigned long lcd_pclk_on : 1;
- unsigned long lcd_sclk_on : 1;
- unsigned long pclk_running : 1;
- unsigned long sclk_running : 1;
- unsigned long : 5;
+ u32 color_depth : 3;
+ u32 portrait_mode : 2;
+ u32 low_power_on : 1;
+ u32 req_freq : 4;
+ u32 en_crtc : 1;
+ u32 en_graphic_req : 1;
+ u32 en_graphic_crtc : 1;
+ u32 total_req_graphic : 10;
+ u32 lcd_pclk_on : 1;
+ u32 lcd_sclk_on : 1;
+ u32 pclk_running : 1;
+ u32 sclk_running : 1;
+ u32 : 5;
} __attribute__((packed));
union graphic_ctrl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct graphic_ctrl_t_w100 f_w100;
struct graphic_ctrl_t_w32xx f_w32xx;
} __attribute__((packed));
struct video_ctrl_t {
- unsigned long video_mode : 1;
- unsigned long keyer_en : 1;
- unsigned long en_video_req : 1;
- unsigned long en_graphic_req_video : 1;
- unsigned long en_video_crtc : 1;
- unsigned long video_hor_exp : 2;
- unsigned long video_ver_exp : 2;
- unsigned long uv_combine : 1;
- unsigned long total_req_video : 9;
- unsigned long video_ch_sel : 1;
- unsigned long video_portrait : 2;
- unsigned long yuv2rgb_en : 1;
- unsigned long yuv2rgb_option : 1;
- unsigned long video_inv_hor : 1;
- unsigned long video_inv_ver : 1;
- unsigned long gamma_sel : 2;
- unsigned long dis_limit : 1;
- unsigned long en_uv_hblend : 1;
- unsigned long rgb_gamma_sel : 2;
+ u32 video_mode : 1;
+ u32 keyer_en : 1;
+ u32 en_video_req : 1;
+ u32 en_graphic_req_video : 1;
+ u32 en_video_crtc : 1;
+ u32 video_hor_exp : 2;
+ u32 video_ver_exp : 2;
+ u32 uv_combine : 1;
+ u32 total_req_video : 9;
+ u32 video_ch_sel : 1;
+ u32 video_portrait : 2;
+ u32 yuv2rgb_en : 1;
+ u32 yuv2rgb_option : 1;
+ u32 video_inv_hor : 1;
+ u32 video_inv_ver : 1;
+ u32 gamma_sel : 2;
+ u32 dis_limit : 1;
+ u32 en_uv_hblend : 1;
+ u32 rgb_gamma_sel : 2;
} __attribute__((packed));
union video_ctrl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct video_ctrl_t f;
} __attribute__((packed));
struct disp_db_buf_cntl_rd_t {
- unsigned long en_db_buf : 1;
- unsigned long update_db_buf_done : 1;
- unsigned long db_buf_cntl : 6;
- unsigned long : 24;
+ u32 en_db_buf : 1;
+ u32 update_db_buf_done : 1;
+ u32 db_buf_cntl : 6;
+ u32 : 24;
} __attribute__((packed));
union disp_db_buf_cntl_rd_u {
- unsigned long val : 32;
+ u32 val : 32;
struct disp_db_buf_cntl_rd_t f;
} __attribute__((packed));
struct disp_db_buf_cntl_wr_t {
- unsigned long en_db_buf : 1;
- unsigned long update_db_buf : 1;
- unsigned long db_buf_cntl : 6;
- unsigned long : 24;
+ u32 en_db_buf : 1;
+ u32 update_db_buf : 1;
+ u32 db_buf_cntl : 6;
+ u32 : 24;
} __attribute__((packed));
union disp_db_buf_cntl_wr_u {
- unsigned long val : 32;
+ u32 val : 32;
struct disp_db_buf_cntl_wr_t f;
} __attribute__((packed));
struct gamma_value1_t {
- unsigned long gamma1 : 8;
- unsigned long gamma2 : 8;
- unsigned long gamma3 : 8;
- unsigned long gamma4 : 8;
+ u32 gamma1 : 8;
+ u32 gamma2 : 8;
+ u32 gamma3 : 8;
+ u32 gamma4 : 8;
} __attribute__((packed));
union gamma_value1_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_value1_t f;
} __attribute__((packed));
struct gamma_value2_t {
- unsigned long gamma5 : 8;
- unsigned long gamma6 : 8;
- unsigned long gamma7 : 8;
- unsigned long gamma8 : 8;
+ u32 gamma5 : 8;
+ u32 gamma6 : 8;
+ u32 gamma7 : 8;
+ u32 gamma8 : 8;
} __attribute__((packed));
union gamma_value2_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_value2_t f;
} __attribute__((packed));
struct gamma_slope_t {
- unsigned long slope1 : 3;
- unsigned long slope2 : 3;
- unsigned long slope3 : 3;
- unsigned long slope4 : 3;
- unsigned long slope5 : 3;
- unsigned long slope6 : 3;
- unsigned long slope7 : 3;
- unsigned long slope8 : 3;
- unsigned long : 8;
+ u32 slope1 : 3;
+ u32 slope2 : 3;
+ u32 slope3 : 3;
+ u32 slope4 : 3;
+ u32 slope5 : 3;
+ u32 slope6 : 3;
+ u32 slope7 : 3;
+ u32 slope8 : 3;
+ u32 : 8;
} __attribute__((packed));
union gamma_slope_u {
- unsigned long val : 32;
+ u32 val : 32;
struct gamma_slope_t f;
} __attribute__((packed));
struct mc_ext_mem_location_t {
- unsigned long mc_ext_mem_start : 16;
- unsigned long mc_ext_mem_top : 16;
+ u32 mc_ext_mem_start : 16;
+ u32 mc_ext_mem_top : 16;
} __attribute__((packed));
union mc_ext_mem_location_u {
- unsigned long val : 32;
+ u32 val : 32;
struct mc_ext_mem_location_t f;
} __attribute__((packed));
struct mc_fb_location_t {
- unsigned long mc_fb_start : 16;
- unsigned long mc_fb_top : 16;
+ u32 mc_fb_start : 16;
+ u32 mc_fb_top : 16;
} __attribute__((packed));
union mc_fb_location_u {
- unsigned long val : 32;
+ u32 val : 32;
struct mc_fb_location_t f;
} __attribute__((packed));
struct clk_pin_cntl_t {
- unsigned long osc_en : 1;
- unsigned long osc_gain : 5;
- unsigned long dont_use_xtalin : 1;
- unsigned long xtalin_pm_en : 1;
- unsigned long xtalin_dbl_en : 1;
- unsigned long : 7;
- unsigned long cg_debug : 16;
+ u32 osc_en : 1;
+ u32 osc_gain : 5;
+ u32 dont_use_xtalin : 1;
+ u32 xtalin_pm_en : 1;
+ u32 xtalin_dbl_en : 1;
+ u32 : 7;
+ u32 cg_debug : 16;
} __attribute__((packed));
union clk_pin_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct clk_pin_cntl_t f;
} __attribute__((packed));
struct pll_ref_fb_div_t {
- unsigned long pll_ref_div : 4;
- unsigned long : 4;
- unsigned long pll_fb_div_int : 6;
- unsigned long : 2;
- unsigned long pll_fb_div_frac : 3;
- unsigned long : 1;
- unsigned long pll_reset_time : 4;
- unsigned long pll_lock_time : 8;
+ u32 pll_ref_div : 4;
+ u32 : 4;
+ u32 pll_fb_div_int : 6;
+ u32 : 2;
+ u32 pll_fb_div_frac : 3;
+ u32 : 1;
+ u32 pll_reset_time : 4;
+ u32 pll_lock_time : 8;
} __attribute__((packed));
union pll_ref_fb_div_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pll_ref_fb_div_t f;
} __attribute__((packed));
struct pll_cntl_t {
- unsigned long pll_pwdn : 1;
- unsigned long pll_reset : 1;
- unsigned long pll_pm_en : 1;
- unsigned long pll_mode : 1;
- unsigned long pll_refclk_sel : 1;
- unsigned long pll_fbclk_sel : 1;
- unsigned long pll_tcpoff : 1;
- unsigned long pll_pcp : 3;
- unsigned long pll_pvg : 3;
- unsigned long pll_vcofr : 1;
- unsigned long pll_ioffset : 2;
- unsigned long pll_pecc_mode : 2;
- unsigned long pll_pecc_scon : 2;
- unsigned long pll_dactal : 4;
- unsigned long pll_cp_clip : 2;
- unsigned long pll_conf : 3;
- unsigned long pll_mbctrl : 2;
- unsigned long pll_ring_off : 1;
+ u32 pll_pwdn : 1;
+ u32 pll_reset : 1;
+ u32 pll_pm_en : 1;
+ u32 pll_mode : 1;
+ u32 pll_refclk_sel : 1;
+ u32 pll_fbclk_sel : 1;
+ u32 pll_tcpoff : 1;
+ u32 pll_pcp : 3;
+ u32 pll_pvg : 3;
+ u32 pll_vcofr : 1;
+ u32 pll_ioffset : 2;
+ u32 pll_pecc_mode : 2;
+ u32 pll_pecc_scon : 2;
+ u32 pll_dactal : 4;
+ u32 pll_cp_clip : 2;
+ u32 pll_conf : 3;
+ u32 pll_mbctrl : 2;
+ u32 pll_ring_off : 1;
} __attribute__((packed));
union pll_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pll_cntl_t f;
} __attribute__((packed));
struct sclk_cntl_t {
- unsigned long sclk_src_sel : 2;
- unsigned long : 2;
- unsigned long sclk_post_div_fast : 4;
- unsigned long sclk_clkon_hys : 3;
- unsigned long sclk_post_div_slow : 4;
- unsigned long disp_cg_ok2switch_en : 1;
- unsigned long sclk_force_reg : 1;
- unsigned long sclk_force_disp : 1;
- unsigned long sclk_force_mc : 1;
- unsigned long sclk_force_extmc : 1;
- unsigned long sclk_force_cp : 1;
- unsigned long sclk_force_e2 : 1;
- unsigned long sclk_force_e3 : 1;
- unsigned long sclk_force_idct : 1;
- unsigned long sclk_force_bist : 1;
- unsigned long busy_extend_cp : 1;
- unsigned long busy_extend_e2 : 1;
- unsigned long busy_extend_e3 : 1;
- unsigned long busy_extend_idct : 1;
- unsigned long : 3;
+ u32 sclk_src_sel : 2;
+ u32 : 2;
+ u32 sclk_post_div_fast : 4;
+ u32 sclk_clkon_hys : 3;
+ u32 sclk_post_div_slow : 4;
+ u32 disp_cg_ok2switch_en : 1;
+ u32 sclk_force_reg : 1;
+ u32 sclk_force_disp : 1;
+ u32 sclk_force_mc : 1;
+ u32 sclk_force_extmc : 1;
+ u32 sclk_force_cp : 1;
+ u32 sclk_force_e2 : 1;
+ u32 sclk_force_e3 : 1;
+ u32 sclk_force_idct : 1;
+ u32 sclk_force_bist : 1;
+ u32 busy_extend_cp : 1;
+ u32 busy_extend_e2 : 1;
+ u32 busy_extend_e3 : 1;
+ u32 busy_extend_idct : 1;
+ u32 : 3;
} __attribute__((packed));
union sclk_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct sclk_cntl_t f;
} __attribute__((packed));
struct pclk_cntl_t {
- unsigned long pclk_src_sel : 2;
- unsigned long : 2;
- unsigned long pclk_post_div : 4;
- unsigned long : 8;
- unsigned long pclk_force_disp : 1;
- unsigned long : 15;
+ u32 pclk_src_sel : 2;
+ u32 : 2;
+ u32 pclk_post_div : 4;
+ u32 : 8;
+ u32 pclk_force_disp : 1;
+ u32 : 15;
} __attribute__((packed));
union pclk_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pclk_cntl_t f;
} __attribute__((packed));
@@ -735,36 +753,176 @@
#define TESTCLK_SRC_XTAL 0x06
struct clk_test_cntl_t {
- unsigned long testclk_sel : 4;
- unsigned long : 3;
- unsigned long start_check_freq : 1;
- unsigned long tstcount_rst : 1;
- unsigned long : 15;
- unsigned long test_count : 8;
+ u32 testclk_sel : 4;
+ u32 : 3;
+ u32 start_check_freq : 1;
+ u32 tstcount_rst : 1;
+ u32 : 15;
+ u32 test_count : 8;
} __attribute__((packed));
union clk_test_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct clk_test_cntl_t f;
} __attribute__((packed));
struct pwrmgt_cntl_t {
- unsigned long pwm_enable : 1;
- unsigned long : 1;
- unsigned long pwm_mode_req : 2;
- unsigned long pwm_wakeup_cond : 2;
- unsigned long pwm_fast_noml_hw_en : 1;
- unsigned long pwm_noml_fast_hw_en : 1;
- unsigned long pwm_fast_noml_cond : 4;
- unsigned long pwm_noml_fast_cond : 4;
- unsigned long pwm_idle_timer : 8;
- unsigned long pwm_busy_timer : 8;
+ u32 pwm_enable : 1;
+ u32 : 1;
+ u32 pwm_mode_req : 2;
+ u32 pwm_wakeup_cond : 2;
+ u32 pwm_fast_noml_hw_en : 1;
+ u32 pwm_noml_fast_hw_en : 1;
+ u32 pwm_fast_noml_cond : 4;
+ u32 pwm_noml_fast_cond : 4;
+ u32 pwm_idle_timer : 8;
+ u32 pwm_busy_timer : 8;
} __attribute__((packed));
union pwrmgt_cntl_u {
- unsigned long val : 32;
+ u32 val : 32;
struct pwrmgt_cntl_t f;
} __attribute__((packed));
+#define SRC_DATATYPE_EQU_DST 3
+
+#define ROP3_SRCCOPY 0xcc
+#define ROP3_PATCOPY 0xf0
+
+#define GMC_BRUSH_SOLID_COLOR 13
+#define GMC_BRUSH_NONE 15
+
+#define DP_SRC_MEM_RECTANGULAR 2
+
+#define DP_OP_ROP 0
+
+struct dp_gui_master_cntl_t {
+ u32 gmc_src_pitch_offset_cntl : 1;
+ u32 gmc_dst_pitch_offset_cntl : 1;
+ u32 gmc_src_clipping : 1;
+ u32 gmc_dst_clipping : 1;
+ u32 gmc_brush_datatype : 4;
+ u32 gmc_dst_datatype : 4;
+ u32 gmc_src_datatype : 3;
+ u32 gmc_byte_pix_order : 1;
+ u32 gmc_default_sel : 1;
+ u32 gmc_rop3 : 8;
+ u32 gmc_dp_src_source : 3;
+ u32 gmc_clr_cmp_fcn_dis : 1;
+ u32 : 1;
+ u32 gmc_wr_msk_dis : 1;
+ u32 gmc_dp_op : 1;
+} __attribute__((packed));
+
+union dp_gui_master_cntl_u {
+ u32 val : 32;
+ struct dp_gui_master_cntl_t f;
+} __attribute__((packed));
+
+struct rbbm_status_t {
+ u32 cmdfifo_avail : 7;
+ u32 : 1;
+ u32 hirq_on_rbb : 1;
+ u32 cprq_on_rbb : 1;
+ u32 cfrq_on_rbb : 1;
+ u32 hirq_in_rtbuf : 1;
+ u32 cprq_in_rtbuf : 1;
+ u32 cfrq_in_rtbuf : 1;
+ u32 cf_pipe_busy : 1;
+ u32 eng_ev_busy : 1;
+ u32 cp_cmdstrm_busy : 1;
+ u32 e2_busy : 1;
+ u32 rb2d_busy : 1;
+ u32 rb3d_busy : 1;
+ u32 se_busy : 1;
+ u32 re_busy : 1;
+ u32 tam_busy : 1;
+ u32 tdm_busy : 1;
+ u32 pb_busy : 1;
+ u32 : 6;
+ u32 gui_active : 1;
+} __attribute__((packed));
+
+union rbbm_status_u {
+ u32 val : 32;
+ struct rbbm_status_t f;
+} __attribute__((packed));
+
+struct dp_datatype_t {
+ u32 dp_dst_datatype : 4;
+ u32 : 4;
+ u32 dp_brush_datatype : 4;
+ u32 dp_src2_type : 1;
+ u32 dp_src2_datatype : 3;
+ u32 dp_src_datatype : 3;
+ u32 : 11;
+ u32 dp_byte_pix_order : 1;
+ u32 : 1;
+} __attribute__((packed));
+
+union dp_datatype_u {
+ u32 val : 32;
+ struct dp_datatype_t f;
+} __attribute__((packed));
+
+struct dp_mix_t {
+ u32 : 8;
+ u32 dp_src_source : 3;
+ u32 dp_src2_source : 3;
+ u32 : 2;
+ u32 dp_rop3 : 8;
+ u32 dp_op : 1;
+ u32 : 7;
+} __attribute__((packed));
+
+union dp_mix_u {
+ u32 val : 32;
+ struct dp_mix_t f;
+} __attribute__((packed));
+
+struct eng_cntl_t {
+ u32 erc_reg_rd_ws : 1;
+ u32 erc_reg_wr_ws : 1;
+ u32 erc_idle_reg_wr : 1;
+ u32 dis_engine_triggers : 1;
+ u32 dis_rop_src_uses_dst_w_h : 1;
+ u32 dis_src_uses_dst_dirmaj : 1;
+ u32 : 6;
+ u32 force_3dclk_when_2dclk : 1;
+ u32 : 19;
+} __attribute__((packed));
+
+union eng_cntl_u {
+ u32 val : 32;
+ struct eng_cntl_t f;
+} __attribute__((packed));
+
+struct dp_cntl_t {
+ u32 dst_x_dir : 1;
+ u32 dst_y_dir : 1;
+ u32 src_x_dir : 1;
+ u32 src_y_dir : 1;
+ u32 dst_major_x : 1;
+ u32 src_major_x : 1;
+ u32 : 26;
+} __attribute__((packed));
+
+union dp_cntl_u {
+ u32 val : 32;
+ struct dp_cntl_t f;
+} __attribute__((packed));
+
+struct dp_cntl_dst_dir_t {
+ u32 : 15;
+ u32 dst_y_dir : 1;
+ u32 : 15;
+ u32 dst_x_dir : 1;
+} __attribute__((packed));
+
+union dp_cntl_dst_dir_u {
+ u32 val : 32;
+ struct dp_cntl_dst_dir_t f;
+} __attribute__((packed));
+
#endif
diff --git a/fs/Makefile b/fs/Makefile
index f3a4f70..83bf478 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -10,7 +10,7 @@
ioctl.o readdir.o select.o fifo.o locks.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \
seq_file.o xattr.o libfs.o fs-writeback.o mpage.o direct-io.o \
- ioprio.o pnode.o drop_caches.o splice.o
+ ioprio.o pnode.o drop_caches.o splice.o sync.o
obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_EPOLL) += eventpoll.o
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 4e1b849..f3418f7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/devfs_fs_kernel.h>
+#include <linux/seq_file.h>
#include <linux/kobject.h>
#include <linux/kobj_map.h>
@@ -27,8 +28,6 @@
static struct kobj_map *cdev_map;
-#define MAX_PROBE_HASH 255 /* random */
-
static DEFINE_MUTEX(chrdevs_lock);
static struct char_device_struct {
@@ -39,93 +38,29 @@
char name[64];
struct file_operations *fops;
struct cdev *cdev; /* will die */
-} *chrdevs[MAX_PROBE_HASH];
+} *chrdevs[CHRDEV_MAJOR_HASH_SIZE];
/* index in the above */
static inline int major_to_index(int major)
{
- return major % MAX_PROBE_HASH;
+ return major % CHRDEV_MAJOR_HASH_SIZE;
}
-struct chrdev_info {
- int index;
- struct char_device_struct *cd;
-};
+#ifdef CONFIG_PROC_FS
-void *get_next_chrdev(void *dev)
-{
- struct chrdev_info *info;
-
- if (dev == NULL) {
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto out;
- info->index=0;
- info->cd = chrdevs[info->index];
- if (info->cd)
- goto out;
- } else {
- info = dev;
- }
-
- while (info->index < ARRAY_SIZE(chrdevs)) {
- if (info->cd)
- info->cd = info->cd->next;
- if (info->cd)
- goto out;
- /*
- * No devices on this chain, move to the next
- */
- info->index++;
- info->cd = (info->index < ARRAY_SIZE(chrdevs)) ?
- chrdevs[info->index] : NULL;
- if (info->cd)
- goto out;
- }
-
-out:
- return info;
-}
-
-void *acquire_chrdev_list(void)
-{
- mutex_lock(&chrdevs_lock);
- return get_next_chrdev(NULL);
-}
-
-void release_chrdev_list(void *dev)
-{
- mutex_unlock(&chrdevs_lock);
- kfree(dev);
-}
-
-
-int count_chrdev_list(void)
+void chrdev_show(struct seq_file *f, off_t offset)
{
struct char_device_struct *cd;
- int i, count;
- count = 0;
-
- for (i = 0; i < ARRAY_SIZE(chrdevs) ; i++) {
- for (cd = chrdevs[i]; cd; cd = cd->next)
- count++;
+ if (offset < CHRDEV_MAJOR_HASH_SIZE) {
+ mutex_lock(&chrdevs_lock);
+ for (cd = chrdevs[offset]; cd; cd = cd->next)
+ seq_printf(f, "%3d %s\n", cd->major, cd->name);
+ mutex_unlock(&chrdevs_lock);
}
-
- return count;
}
-int get_chrdev_info(void *dev, int *major, char **name)
-{
- struct chrdev_info *info = dev;
-
- if (info->cd == NULL)
- return 1;
-
- *major = info->cd->major;
- *name = info->cd->name;
- return 0;
-}
+#endif /* CONFIG_PROC_FS */
/*
* Register a single major with a specified minor range.
diff --git a/fs/dcache.c b/fs/dcache.c
index 19458d3..940d188 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1101,6 +1101,32 @@
}
/**
+ * d_hash_and_lookup - hash the qstr then search for a dentry
+ * @dir: Directory to search in
+ * @name: qstr of name we wish to find
+ *
+ * On hash failure or on lookup failure NULL is returned.
+ */
+struct dentry *d_hash_and_lookup(struct dentry *dir, struct qstr *name)
+{
+ struct dentry *dentry = NULL;
+
+ /*
+ * Check for a fs-specific hash function. Note that we must
+ * calculate the standard hash first, as the d_op->d_hash()
+ * routine may choose to leave the hash value unchanged.
+ */
+ name->hash = full_name_hash(name->name, name->len);
+ if (dir->d_op && dir->d_op->d_hash) {
+ if (dir->d_op->d_hash(dir, name) < 0)
+ goto out;
+ }
+ dentry = d_lookup(dir, name);
+out:
+ return dentry;
+}
+
+/**
* d_validate - verify dentry provided from insecure source
* @dentry: The dentry alleged to be valid child of @dparent
* @dparent: The parent dentry (known to be valid)
@@ -1172,11 +1198,11 @@
spin_lock(&dentry->d_lock);
isdir = S_ISDIR(dentry->d_inode->i_mode);
if (atomic_read(&dentry->d_count) == 1) {
- /* remove this and other inotify debug checks after 2.6.18 */
- dentry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
-
dentry_iput(dentry);
fsnotify_nameremove(dentry, isdir);
+
+ /* remove this and other inotify debug checks after 2.6.18 */
+ dentry->d_flags &= ~DCACHE_INOTIFY_PARENT_WATCHED;
return;
}
@@ -1616,26 +1642,12 @@
struct dentry * dentry;
ino_t ino = 0;
- /*
- * Check for a fs-specific hash function. Note that we must
- * calculate the standard hash first, as the d_op->d_hash()
- * routine may choose to leave the hash value unchanged.
- */
- name->hash = full_name_hash(name->name, name->len);
- if (dir->d_op && dir->d_op->d_hash)
- {
- if (dir->d_op->d_hash(dir, name) != 0)
- goto out;
- }
-
- dentry = d_lookup(dir, name);
- if (dentry)
- {
+ dentry = d_hash_and_lookup(dir, name);
+ if (dentry) {
if (dentry->d_inode)
ino = dentry->d_inode->i_ino;
dput(dentry);
}
-out:
return ino;
}
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs_kern.c
index 2ba20cd..5e6363b 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs_kern.c
@@ -216,10 +216,10 @@
static struct inode_operations hppfs_file_iops = {
};
-static ssize_t read_proc(struct file *file, char *buf, ssize_t count,
+static ssize_t read_proc(struct file *file, char __user *buf, ssize_t count,
loff_t *ppos, int is_user)
{
- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
+ ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
ssize_t n;
read = file->f_dentry->d_inode->i_fop->read;
@@ -236,7 +236,7 @@
return n;
}
-static ssize_t hppfs_read_file(int fd, char *buf, ssize_t count)
+static ssize_t hppfs_read_file(int fd, char __user *buf, ssize_t count)
{
ssize_t n;
int cur, err;
@@ -274,7 +274,7 @@
return n;
}
-static ssize_t hppfs_read(struct file *file, char *buf, size_t count,
+static ssize_t hppfs_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
struct hppfs_private *hppfs = file->private_data;
@@ -313,12 +313,12 @@
return(count);
}
-static ssize_t hppfs_write(struct file *file, const char *buf, size_t len,
+static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
loff_t *ppos)
{
struct hppfs_private *data = file->private_data;
struct file *proc_file = data->proc_file;
- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
+ ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
int err;
write = proc_file->f_dentry->d_inode->i_fop->write;
@@ -658,7 +658,7 @@
.statfs = hppfs_statfs,
};
-static int hppfs_readlink(struct dentry *dentry, char *buffer, int buflen)
+static int hppfs_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct file *proc_file;
struct dentry *proc_dentry;
diff --git a/fs/locks.c b/fs/locks.c
index 4d9e71d..dda83d6 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -168,18 +168,9 @@
/* Free a lock which is not in use. */
static void locks_free_lock(struct file_lock *fl)
{
- if (fl == NULL) {
- BUG();
- return;
- }
- if (waitqueue_active(&fl->fl_wait))
- panic("Attempting to free lock with active wait queue");
-
- if (!list_empty(&fl->fl_block))
- panic("Attempting to free lock with active block list");
-
- if (!list_empty(&fl->fl_link))
- panic("Attempting to free lock on active lock list");
+ BUG_ON(waitqueue_active(&fl->fl_wait));
+ BUG_ON(!list_empty(&fl->fl_block));
+ BUG_ON(!list_empty(&fl->fl_link));
locks_release_private(fl);
kmem_cache_free(filelock_cache, fl);
@@ -735,8 +726,9 @@
* at the head of the list, but that's secret knowledge known only to
* flock_lock_file and posix_lock_file.
*/
-static int flock_lock_file(struct file *filp, struct file_lock *new_fl)
+static int flock_lock_file(struct file *filp, struct file_lock *request)
{
+ struct file_lock *new_fl = NULL;
struct file_lock **before;
struct inode * inode = filp->f_dentry->d_inode;
int error = 0;
@@ -751,17 +743,19 @@
continue;
if (filp != fl->fl_file)
continue;
- if (new_fl->fl_type == fl->fl_type)
+ if (request->fl_type == fl->fl_type)
goto out;
found = 1;
locks_delete_lock(before);
break;
}
- unlock_kernel();
- if (new_fl->fl_type == F_UNLCK)
- return 0;
+ if (request->fl_type == F_UNLCK)
+ goto out;
+ new_fl = locks_alloc_lock();
+ if (new_fl == NULL)
+ goto out;
/*
* If a higher-priority process was blocked on the old file lock,
* give it the opportunity to lock the file.
@@ -769,26 +763,27 @@
if (found)
cond_resched();
- lock_kernel();
for_each_lock(inode, before) {
struct file_lock *fl = *before;
if (IS_POSIX(fl))
break;
if (IS_LEASE(fl))
continue;
- if (!flock_locks_conflict(new_fl, fl))
+ if (!flock_locks_conflict(request, fl))
continue;
error = -EAGAIN;
- if (new_fl->fl_flags & FL_SLEEP) {
- locks_insert_block(fl, new_fl);
- }
+ if (request->fl_flags & FL_SLEEP)
+ locks_insert_block(fl, request);
goto out;
}
+ locks_copy_lock(new_fl, request);
locks_insert_lock(&inode->i_flock, new_fl);
- error = 0;
+ new_fl = NULL;
out:
unlock_kernel();
+ if (new_fl)
+ locks_free_lock(new_fl);
return error;
}
@@ -1569,9 +1564,7 @@
error = flock_lock_file_wait(filp, lock);
out_free:
- if (list_empty(&lock->fl_link)) {
- locks_free_lock(lock);
- }
+ locks_free_lock(lock);
out_putf:
fput(filp);
diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index 626a367..5b76ccd 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -12,14 +12,6 @@
#include <linux/msdos_fs.h>
#include <linux/smp_lock.h>
-/* MS-DOS "device special files" */
-static const unsigned char *reserved_names[] = {
- "CON ", "PRN ", "NUL ", "AUX ",
- "LPT1 ", "LPT2 ", "LPT3 ", "LPT4 ",
- "COM1 ", "COM2 ", "COM3 ", "COM4 ",
- NULL
-};
-
/* Characters that are undesirable in an MS-DOS file name */
static unsigned char bad_chars[] = "*?<>|\"";
static unsigned char bad_if_strict_pc[] = "+=,; ";
@@ -40,7 +32,6 @@
*/
{
unsigned char *walk;
- const unsigned char **reserved;
unsigned char c;
int space;
@@ -127,11 +118,7 @@
}
while (walk - res < MSDOS_NAME)
*walk++ = ' ';
- if (!opts->atari)
- /* GEMDOS is less stupid and has no reserved names */
- for (reserved = reserved_names; *reserved; reserved++)
- if (!strncmp(res, *reserved, 8))
- return -EINVAL;
+
return 0;
}
diff --git a/fs/namei.c b/fs/namei.c
index 22f6e8d..96723ae 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1254,7 +1254,7 @@
return dentry;
}
-struct dentry * lookup_hash(struct nameidata *nd)
+static struct dentry *lookup_hash(struct nameidata *nd)
{
return __lookup_hash(&nd->last, nd->dentry, nd);
}
@@ -2697,7 +2697,6 @@
EXPORT_SYMBOL(get_write_access); /* binfmt_aout */
EXPORT_SYMBOL(getname);
EXPORT_SYMBOL(lock_rename);
-EXPORT_SYMBOL(lookup_hash);
EXPORT_SYMBOL(lookup_one_len);
EXPORT_SYMBOL(page_follow_link_light);
EXPORT_SYMBOL(page_put_link);
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 8f1f49c..a3a3eec 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -534,12 +534,15 @@
/* If the process being read is separated by chroot from the reading process,
* don't let the reader access the threads.
+ *
+ * note: this does dput(root) and mntput(vfsmnt) on exit.
*/
static int proc_check_chroot(struct dentry *root, struct vfsmount *vfsmnt)
{
struct dentry *de, *base;
struct vfsmount *our_vfsmnt, *mnt;
int res = 0;
+
read_lock(¤t->fs->lock);
our_vfsmnt = mntget(current->fs->rootmnt);
base = dget(current->fs->root);
@@ -549,11 +552,11 @@
de = root;
mnt = vfsmnt;
- while (vfsmnt != our_vfsmnt) {
- if (vfsmnt == vfsmnt->mnt_parent)
+ while (mnt != our_vfsmnt) {
+ if (mnt == mnt->mnt_parent)
goto out;
- de = vfsmnt->mnt_mountpoint;
- vfsmnt = vfsmnt->mnt_parent;
+ de = mnt->mnt_mountpoint;
+ mnt = mnt->mnt_parent;
}
if (!is_subdir(de, base))
@@ -564,7 +567,7 @@
dput(base);
mntput(our_vfsmnt);
dput(root);
- mntput(mnt);
+ mntput(vfsmnt);
return res;
out:
spin_unlock(&vfsmount_lock);
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index ef5a332..5c10ea1 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -249,155 +249,64 @@
return seq_open(file, &cpuinfo_op);
}
-enum devinfo_states {
- CHR_HDR,
- CHR_LIST,
- BLK_HDR,
- BLK_LIST,
- DEVINFO_DONE
-};
-
-struct devinfo_state {
- void *chrdev;
- void *blkdev;
- unsigned int num_records;
- unsigned int cur_record;
- enum devinfo_states state;
-};
-
-static void *devinfo_start(struct seq_file *f, loff_t *pos)
-{
- struct devinfo_state *info = f->private;
-
- if (*pos) {
- if ((info) && (*pos <= info->num_records))
- return info;
- return NULL;
- }
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- f->private = info;
- info->chrdev = acquire_chrdev_list();
- info->blkdev = acquire_blkdev_list();
- info->state = CHR_HDR;
- info->num_records = count_chrdev_list();
- info->num_records += count_blkdev_list();
- info->num_records += 2; /* Character and Block headers */
- *pos = 1;
- info->cur_record = *pos;
- return info;
-}
-
-static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
-{
- int idummy;
- char *ndummy;
- struct devinfo_state *info = f->private;
-
- switch (info->state) {
- case CHR_HDR:
- info->state = CHR_LIST;
- (*pos)++;
- /*fallthrough*/
- case CHR_LIST:
- if (get_chrdev_info(info->chrdev,&idummy,&ndummy)) {
- /*
- * The character dev list is complete
- */
- info->state = BLK_HDR;
- } else {
- info->chrdev = get_next_chrdev(info->chrdev);
- }
- (*pos)++;
- break;
- case BLK_HDR:
- info->state = BLK_LIST;
- (*pos)++;
- /*fallthrough*/
- case BLK_LIST:
- if (get_blkdev_info(info->blkdev,&idummy,&ndummy)) {
- /*
- * The block dev list is complete
- */
- info->state = DEVINFO_DONE;
- } else {
- info->blkdev = get_next_blkdev(info->blkdev);
- }
- (*pos)++;
- break;
- case DEVINFO_DONE:
- (*pos)++;
- info->cur_record = *pos;
- info = NULL;
- break;
- default:
- break;
- }
- if (info)
- info->cur_record = *pos;
- return info;
-}
-
-static void devinfo_stop(struct seq_file *f, void *v)
-{
- struct devinfo_state *info = f->private;
-
- if (info) {
- release_chrdev_list(info->chrdev);
- release_blkdev_list(info->blkdev);
- f->private = NULL;
- kfree(info);
- }
-}
-
-static int devinfo_show(struct seq_file *f, void *arg)
-{
- int major;
- char *name;
- struct devinfo_state *info = f->private;
-
- switch(info->state) {
- case CHR_HDR:
- seq_printf(f,"Character devices:\n");
- /* fallthrough */
- case CHR_LIST:
- if (!get_chrdev_info(info->chrdev,&major,&name))
- seq_printf(f,"%3d %s\n",major,name);
- break;
- case BLK_HDR:
- seq_printf(f,"\nBlock devices:\n");
- /* fallthrough */
- case BLK_LIST:
- if (!get_blkdev_info(info->blkdev,&major,&name))
- seq_printf(f,"%3d %s\n",major,name);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-static struct seq_operations devinfo_op = {
- .start = devinfo_start,
- .next = devinfo_next,
- .stop = devinfo_stop,
- .show = devinfo_show,
-};
-
-static int devinfo_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &devinfo_op);
-}
-
-static struct file_operations proc_devinfo_operations = {
- .open = devinfo_open,
+static struct file_operations proc_cpuinfo_operations = {
+ .open = cpuinfo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
-static struct file_operations proc_cpuinfo_operations = {
- .open = cpuinfo_open,
+static int devinfo_show(struct seq_file *f, void *v)
+{
+ int i = *(loff_t *) v;
+
+ if (i < CHRDEV_MAJOR_HASH_SIZE) {
+ if (i == 0)
+ seq_printf(f, "Character devices:\n");
+ chrdev_show(f, i);
+ } else {
+ i -= CHRDEV_MAJOR_HASH_SIZE;
+ if (i == 0)
+ seq_printf(f, "\nBlock devices:\n");
+ blkdev_show(f, i);
+ }
+ return 0;
+}
+
+static void *devinfo_start(struct seq_file *f, loff_t *pos)
+{
+ if (*pos < (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+ return pos;
+ return NULL;
+}
+
+static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
+{
+ (*pos)++;
+ if (*pos >= (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+ return NULL;
+ return pos;
+}
+
+static void devinfo_stop(struct seq_file *f, void *v)
+{
+ /* Nothing to do */
+}
+
+static struct seq_operations devinfo_ops = {
+ .start = devinfo_start,
+ .next = devinfo_next,
+ .stop = devinfo_stop,
+ .show = devinfo_show
+};
+
+static int devinfo_open(struct inode *inode, struct file *filp)
+{
+ return seq_open(filp, &devinfo_ops);
+}
+
+static struct file_operations proc_devinfo_operations = {
+ .open = devinfo_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
diff --git a/fs/select.c b/fs/select.c
index b3a3a13..071660f 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -314,7 +314,7 @@
int ret, size, max_fdset;
struct fdtable *fdt;
/* Allocate small arguments on the stack to save memory and be faster */
- char stack_fds[SELECT_STACK_ALLOC];
+ long stack_fds[SELECT_STACK_ALLOC/sizeof(long)];
ret = -EINVAL;
if (n < 0)
@@ -639,8 +639,10 @@
struct poll_list *walk;
struct fdtable *fdt;
int max_fdset;
- /* Allocate small arguments on the stack to save memory and be faster */
- char stack_pps[POLL_STACK_ALLOC];
+ /* Allocate small arguments on the stack to save memory and be
+ faster - use long to make sure the buffer is aligned properly
+ on 64 bit archs to avoid unaligned access */
+ long stack_pps[POLL_STACK_ALLOC/sizeof(long)];
struct poll_list *stack_pp = NULL;
/* Do a sanity check on nfds ... */
diff --git a/fs/sync.c b/fs/sync.c
new file mode 100644
index 0000000..8616006
--- /dev/null
+++ b/fs/sync.c
@@ -0,0 +1,164 @@
+/*
+ * High-level sync()-related operations
+ */
+
+#include <linux/kernel.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/writeback.h>
+#include <linux/syscalls.h>
+#include <linux/linkage.h>
+#include <linux/pagemap.h>
+
+#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
+ SYNC_FILE_RANGE_WAIT_AFTER)
+
+/*
+ * sys_sync_file_range() permits finely controlled syncing over a segment of
+ * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
+ * zero then sys_sync_file_range() will operate from offset out to EOF.
+ *
+ * The flag bits are:
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
+ * before performing the write.
+ *
+ * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
+ * range which are not presently under writeback.
+ *
+ * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
+ * after performing the write.
+ *
+ * Useful combinations of the flag bits are:
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
+ * in the range which were dirty on entry to sys_sync_file_range() are placed
+ * under writeout. This is a start-write-for-data-integrity operation.
+ *
+ * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
+ * are not presently under writeout. This is an asynchronous flush-to-disk
+ * operation. Not suitable for data integrity operations.
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
+ * completion of writeout of all pages in the range. This will be used after an
+ * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
+ * for that operation to complete and to return the result.
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
+ * a traditional sync() operation. This is a write-for-data-integrity operation
+ * which will ensure that all pages in the range which were dirty on entry to
+ * sys_sync_file_range() are committed to disk.
+ *
+ *
+ * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
+ * I/O errors or ENOSPC conditions and will return those to the caller, after
+ * clearing the EIO and ENOSPC flags in the address_space.
+ *
+ * It should be noted that none of these operations write out the file's
+ * metadata. So unless the application is strictly performing overwrites of
+ * already-instantiated disk blocks, there are no guarantees here that the data
+ * will be available after a crash.
+ */
+asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
+ int flags)
+{
+ int ret;
+ struct file *file;
+ loff_t endbyte; /* inclusive */
+ int fput_needed;
+ umode_t i_mode;
+
+ ret = -EINVAL;
+ if (flags & ~VALID_FLAGS)
+ goto out;
+
+ endbyte = offset + nbytes;
+
+ if ((s64)offset < 0)
+ goto out;
+ if ((s64)endbyte < 0)
+ goto out;
+ if (endbyte < offset)
+ goto out;
+
+ if (sizeof(pgoff_t) == 4) {
+ if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
+ /*
+ * The range starts outside a 32 bit machine's
+ * pagecache addressing capabilities. Let it "succeed"
+ */
+ ret = 0;
+ goto out;
+ }
+ if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
+ /*
+ * Out to EOF
+ */
+ nbytes = 0;
+ }
+ }
+
+ if (nbytes == 0)
+ endbyte = -1;
+ else
+ endbyte--; /* inclusive */
+
+ ret = -EBADF;
+ file = fget_light(fd, &fput_needed);
+ if (!file)
+ goto out;
+
+ i_mode = file->f_dentry->d_inode->i_mode;
+ ret = -ESPIPE;
+ if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
+ !S_ISLNK(i_mode))
+ goto out_put;
+
+ ret = do_sync_file_range(file, offset, endbyte, flags);
+out_put:
+ fput_light(file, fput_needed);
+out:
+ return ret;
+}
+
+/*
+ * `endbyte' is inclusive
+ */
+int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
+ int flags)
+{
+ int ret;
+ struct address_space *mapping;
+
+ mapping = file->f_mapping;
+ if (!mapping) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = 0;
+ if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
+ ret = wait_on_page_writeback_range(mapping,
+ offset >> PAGE_CACHE_SHIFT,
+ endbyte >> PAGE_CACHE_SHIFT);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (flags & SYNC_FILE_RANGE_WRITE) {
+ ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
+ WB_SYNC_NONE);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (flags & SYNC_FILE_RANGE_WAIT_AFTER) {
+ ret = wait_on_page_writeback_range(mapping,
+ offset >> PAGE_CACHE_SHIFT,
+ endbyte >> PAGE_CACHE_SHIFT);
+ }
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(do_sync_file_range);
diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c
index ef46939..a56cec3 100644
--- a/fs/vfat/namei.c
+++ b/fs/vfat/namei.c
@@ -185,24 +185,6 @@
return -EINVAL;
if (len >= 256)
return -ENAMETOOLONG;
-
- /* MS-DOS "device special files" */
- if (len == 3 || (len > 3 && name[3] == '.')) { /* basename == 3 */
- if (!strnicmp(name, "aux", 3) ||
- !strnicmp(name, "con", 3) ||
- !strnicmp(name, "nul", 3) ||
- !strnicmp(name, "prn", 3))
- return -EINVAL;
- }
- if (len == 4 || (len > 4 && name[4] == '.')) { /* basename == 4 */
- /* "com1", "com2", ... */
- if ('1' <= name[3] && name[3] <= '9') {
- if (!strnicmp(name, "com", 3) ||
- !strnicmp(name, "lpt", 3))
- return -EINVAL;
- }
- }
-
return 0;
}
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 0b43495..94cb498 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -27,6 +27,8 @@
*/
struct corgibl_machinfo {
int max_intensity;
+ int default_intensity;
+ int limit_mask;
void (*set_bl_intensity)(int intensity);
};
extern void corgibl_limit_intensity(int limit);
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
index de46148..9291c24 100644
--- a/include/asm-generic/local.h
+++ b/include/asm-generic/local.h
@@ -7,8 +7,15 @@
#include <asm/atomic.h>
#include <asm/types.h>
-/* An unsigned long type for operations which are atomic for a single
- * CPU. Usually used in combination with per-cpu variables. */
+/*
+ * A signed long type for operations which are atomic for a single CPU.
+ * Usually used in combination with per-cpu variables.
+ *
+ * This is the default implementation, which uses atomic_long_t. Which is
+ * rather pointless. The whole point behind local_t is that some processors
+ * can perform atomic adds and subtracts in a manner which is atomic wrt IRQs
+ * running on this CPU. local_t allows exploitation of such capabilities.
+ */
/* Implement in terms of atomics. */
@@ -20,7 +27,7 @@
#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) }
-#define local_read(l) ((unsigned long)atomic_long_read(&(l)->a))
+#define local_read(l) atomic_long_read(&(l)->a)
#define local_set(l,i) atomic_long_set((&(l)->a),(i))
#define local_inc(l) atomic_long_inc(&(l)->a)
#define local_dec(l) atomic_long_dec(&(l)->a)
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
index 40c6d1f..29c6ac3 100644
--- a/include/asm-generic/mutex-dec.h
+++ b/include/asm-generic/mutex-dec.h
@@ -17,13 +17,14 @@
* it wasn't 1 originally. This function MUST leave the value lower than
* 1 even when the "1" assertion wasn't true.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- if (unlikely(atomic_dec_return(count) < 0)) \
- fail_fn(count); \
- else \
- smp_mb(); \
-} while (0)
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(atomic_dec_return(count) < 0))
+ fail_fn(count);
+ else
+ smp_mb();
+}
/**
* __mutex_fastpath_lock_retval - try to take the lock by moving the count
@@ -36,7 +37,7 @@
* or anything the slow path function returns.
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
return fail_fn(count);
@@ -59,12 +60,13 @@
* __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
* to return 0 otherwise.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- smp_mb(); \
- if (unlikely(atomic_inc_return(count) <= 0)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ smp_mb();
+ if (unlikely(atomic_inc_return(count) <= 0))
+ fail_fn(count);
+}
#define __mutex_slowpath_needs_to_unlock() 1
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 1d24f47..32a2100 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -3,7 +3,7 @@
*
* Generic implementation of the mutex fastpath, based on xchg().
*
- * NOTE: An xchg based implementation is less optimal than an atomic
+ * NOTE: An xchg based implementation might be less optimal than an atomic
* decrement/increment based implementation. If your architecture
* has a reasonable atomic dec/inc then you should probably use
* asm-generic/mutex-dec.h instead, or you could open-code an
@@ -22,14 +22,14 @@
* wasn't 1 originally. This function MUST leave the value lower than 1
* even when the "1" assertion wasn't true.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- if (unlikely(atomic_xchg(count, 0) != 1)) \
- fail_fn(count); \
- else \
- smp_mb(); \
-} while (0)
-
+static inline void
+__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(atomic_xchg(count, 0) != 1))
+ fail_fn(count);
+ else
+ smp_mb();
+}
/**
* __mutex_fastpath_lock_retval - try to take the lock by moving the count
@@ -42,7 +42,7 @@
* or anything the slow path function returns
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_xchg(count, 0) != 1))
return fail_fn(count);
@@ -64,12 +64,13 @@
* __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
* to return 0 otherwise.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- smp_mb(); \
- if (unlikely(atomic_xchg(count, 1) != 0)) \
- fail_fn(count); \
-} while (0)
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+{
+ smp_mb();
+ if (unlikely(atomic_xchg(count, 1) != 0))
+ fail_fn(count);
+}
#define __mutex_slowpath_needs_to_unlock() 0
diff --git a/include/asm-i386/apicdef.h b/include/asm-i386/apicdef.h
index 03185ce..5e4a35a 100644
--- a/include/asm-i386/apicdef.h
+++ b/include/asm-i386/apicdef.h
@@ -37,6 +37,7 @@
#define APIC_SPIV_FOCUS_DISABLED (1<<9)
#define APIC_SPIV_APIC_ENABLED (1<<8)
#define APIC_ISR 0x100
+#define APIC_ISR_NR 0x8 /* Number of 32 bit ISR registers. */
#define APIC_TMR 0x180
#define APIC_IRR 0x200
#define APIC_ESR 0x280
diff --git a/include/asm-i386/floppy.h b/include/asm-i386/floppy.h
index 79727af..0340304 100644
--- a/include/asm-i386/floppy.h
+++ b/include/asm-i386/floppy.h
@@ -56,7 +56,6 @@
register unsigned char st;
#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
#ifdef TRACE_FLPY_INT
static int calls=0;
@@ -71,38 +70,6 @@
bytes = virtual_dma_count;
#endif
-#ifndef NO_FLOPPY_ASSEMBLER
- __asm__ (
- "testl %1,%1"
- "je 3f"
-"1: inb %w4,%b0"
- "andb $160,%b0"
- "cmpb $160,%b0"
- "jne 2f"
- "incw %w4"
- "testl %3,%3"
- "jne 4f"
- "inb %w4,%b0"
- "movb %0,(%2)"
- "jmp 5f"
-"4: movb (%2),%0"
- "outb %b0,%w4"
-"5: decw %w4"
- "outb %0,$0x80"
- "decl %1"
- "incl %2"
- "testl %1,%1"
- "jne 1b"
-"3: inb %w4,%b0"
-"2: "
- : "=a" ((char) st),
- "=c" ((long) virtual_dma_count),
- "=S" ((long) virtual_dma_addr)
- : "b" ((long) virtual_dma_mode),
- "d" ((short) virtual_dma_port+4),
- "1" ((long) virtual_dma_count),
- "2" ((long) virtual_dma_addr));
-#else
{
register int lcount;
register char *lptr;
@@ -122,7 +89,6 @@
virtual_dma_addr = lptr;
st = inb(virtual_dma_port+4);
}
-#endif
#ifdef TRACE_FLPY_INT
calls++;
diff --git a/include/asm-i386/local.h b/include/asm-i386/local.h
index 0177da8..e67fa08 100644
--- a/include/asm-i386/local.h
+++ b/include/asm-i386/local.h
@@ -5,7 +5,7 @@
typedef struct
{
- volatile unsigned long counter;
+ volatile long counter;
} local_t;
#define LOCAL_INIT(i) { (i) }
@@ -29,7 +29,7 @@
:"m" (v->counter));
}
-static __inline__ void local_add(unsigned long i, local_t *v)
+static __inline__ void local_add(long i, local_t *v)
{
__asm__ __volatile__(
"addl %1,%0"
@@ -37,7 +37,7 @@
:"ir" (i), "m" (v->counter));
}
-static __inline__ void local_sub(unsigned long i, local_t *v)
+static __inline__ void local_sub(long i, local_t *v)
{
__asm__ __volatile__(
"subl %1,%0"
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 789e9bd..2e7f3e2 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -319,8 +319,9 @@
#define __NR_set_robust_list 311
#define __NR_get_robust_list 312
#define __NR_sys_splice 313
+#define __NR_sys_sync_file_range 314
-#define NR_syscalls 314
+#define NR_syscalls 315
/*
* user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 65f5a7b..d075725 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -365,8 +365,11 @@
* powers of 2 writes until it reaches sufficient alignment).
*
* Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
*/
-#define NET_IP_ALIGN 0
+#define NET_IP_ALIGN 0
+#define NET_SKB_PAD L1_CACHE_BYTES
#endif
#define arch_align_stack(x) (x)
diff --git a/include/asm-s390/percpu.h b/include/asm-s390/percpu.h
index e10ed87..436d216 100644
--- a/include/asm-s390/percpu.h
+++ b/include/asm-s390/percpu.h
@@ -46,7 +46,7 @@
#define percpu_modcopy(pcpudst, src, size) \
do { \
unsigned int __i; \
- for_each_cpu(__i) \
+ for_each_possible_cpu(__i) \
memcpy((pcpudst)+__per_cpu_offset[__i], \
(src), (size)); \
} while (0)
diff --git a/include/asm-um/desc.h b/include/asm-um/desc.h
index ac1d2a2..4ec34a5 100644
--- a/include/asm-um/desc.h
+++ b/include/asm-um/desc.h
@@ -1,6 +1,16 @@
#ifndef __UM_DESC_H
#define __UM_DESC_H
-#include "asm/arch/desc.h"
+/* Taken from asm-i386/desc.h, it's the only thing we need. The rest wouldn't
+ * compile, and has never been used. */
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
#endif
diff --git a/include/asm-um/host_ldt-i386.h b/include/asm-um/host_ldt-i386.h
new file mode 100644
index 0000000..b27cb0a
--- /dev/null
+++ b/include/asm-um/host_ldt-i386.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_HOST_LDT_I386_H
+#define __ASM_HOST_LDT_I386_H
+
+#include "asm/arch/ldt.h"
+
+/*
+ * macros stolen from include/asm-i386/desc.h
+ */
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ 0x7000)
+
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
+
+#endif
diff --git a/include/asm-um/host_ldt-x86_64.h b/include/asm-um/host_ldt-x86_64.h
new file mode 100644
index 0000000..74a63f7
--- /dev/null
+++ b/include/asm-um/host_ldt-x86_64.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_HOST_LDT_X86_64_H
+#define __ASM_HOST_LDT_X86_64_H
+
+#include "asm/arch/ldt.h"
+
+/*
+ * macros stolen from include/asm-x86_64/desc.h
+ */
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+/* Don't allow setting of the lm bit. It is useless anyways because
+ * 64bit system calls require __USER_CS. */
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ /* ((info)->lm << 21) | */ \
+ 0x7000)
+
+#define LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 && \
+ (info)->lm == 0)
+
+#endif
diff --git a/include/asm-um/ldt-i386.h b/include/asm-um/ldt-i386.h
deleted file mode 100644
index 175722a..0000000
--- a/include/asm-um/ldt-i386.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_I386_H
-#define __ASM_LDT_I386_H
-
-#include "asm/semaphore.h"
-#include "asm/arch/ldt.h"
-
-struct mmu_context_skas;
-extern void ldt_host_info(void);
-extern long init_new_ldt(struct mmu_context_skas * to_mm,
- struct mmu_context_skas * from_mm);
-extern void free_ldt(struct mmu_context_skas * mm);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct semaphore semaphore;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-/*
- * macros stolen from include/asm-i386/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 )
-
-#endif
diff --git a/include/asm-um/ldt-x86_64.h b/include/asm-um/ldt-x86_64.h
deleted file mode 100644
index 96b35aa..0000000
--- a/include/asm-um/ldt-x86_64.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_X86_64_H
-#define __ASM_LDT_X86_64_H
-
-#include "asm/semaphore.h"
-#include "asm/arch/ldt.h"
-
-struct mmu_context_skas;
-extern void ldt_host_info(void);
-extern long init_new_ldt(struct mmu_context_skas * to_mm,
- struct mmu_context_skas * from_mm);
-extern void free_ldt(struct mmu_context_skas * mm);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct semaphore semaphore;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-/*
- * macros stolen from include/asm-x86_64/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-/* Don't allow setting of the lm bit. It is useless anyways because
- * 64bit system calls require __USER_CS. */
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- /* ((info)->lm << 21) | */ \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 && \
- (info)->lm == 0)
-
-#endif
diff --git a/include/asm-um/ldt.h b/include/asm-um/ldt.h
new file mode 100644
index 0000000..96f82a4
--- /dev/null
+++ b/include/asm-um/ldt.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include "asm/semaphore.h"
+#include "asm/host_ldt.h"
+
+struct mmu_context_skas;
+extern void ldt_host_info(void);
+extern long init_new_ldt(struct mmu_context_skas * to_mm,
+ struct mmu_context_skas * from_mm);
+extern void free_ldt(struct mmu_context_skas * mm);
+
+#define LDT_PAGES_MAX \
+ ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+ (PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+ ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+ __u32 a;
+ __u32 b;
+};
+
+typedef struct uml_ldt {
+ int entry_count;
+ struct semaphore semaphore;
+ union {
+ struct ldt_entry * pages[LDT_PAGES_MAX];
+ struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+ } u;
+} uml_ldt_t;
+
+#endif
diff --git a/include/asm-um/processor-i386.h b/include/asm-um/processor-i386.h
index 4108a57..595f1c3 100644
--- a/include/asm-um/processor-i386.h
+++ b/include/asm-um/processor-i386.h
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -6,21 +6,48 @@
#ifndef __UM_PROCESSOR_I386_H
#define __UM_PROCESSOR_I386_H
+#include "linux/string.h"
+#include "asm/host_ldt.h"
+#include "asm/segment.h"
+
extern int host_has_xmm;
extern int host_has_cmov;
/* include faultinfo structure */
#include "sysdep/faultinfo.h"
+struct uml_tls_struct {
+ struct user_desc tls;
+ unsigned flushed:1;
+ unsigned present:1;
+};
+
struct arch_thread {
+ struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
unsigned long debugregs[8];
int debugregs_seq;
struct faultinfo faultinfo;
};
-#define INIT_ARCH_THREAD { .debugregs = { [ 0 ... 7 ] = 0 }, \
- .debugregs_seq = 0, \
- .faultinfo = { 0, 0, 0 } }
+#define INIT_ARCH_THREAD { \
+ .tls_array = { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
+ { .present = 0, .flushed = 0 } }, \
+ .debugregs = { [ 0 ... 7 ] = 0 }, \
+ .debugregs_seq = 0, \
+ .faultinfo = { 0, 0, 0 } \
+}
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+ /* Clear any TLS still hanging */
+ memset(&thread->tls_array, 0, sizeof(thread->tls_array));
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+ memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
+}
#include "asm/arch/user.h"
diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h
index e1e1255..10609af 100644
--- a/include/asm-um/processor-x86_64.h
+++ b/include/asm-um/processor-x86_64.h
@@ -28,6 +28,15 @@
.debugregs_seq = 0, \
.faultinfo = { 0, 0, 0 } }
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+}
+
#include "asm/arch/user.h"
#define current_text_addr() \
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
index 46599ac..5034843 100644
--- a/include/asm-um/ptrace-generic.h
+++ b/include/asm-um/ptrace-generic.h
@@ -28,7 +28,7 @@
union uml_pt_regs regs;
};
-#define EMPTY_REGS { regs : EMPTY_UML_PT_REGS }
+#define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
@@ -60,17 +60,9 @@
extern void send_sigtrap(struct task_struct *tsk, union uml_pt_regs *regs,
int error_code);
-#endif
+extern int arch_copy_tls(struct task_struct *new);
+extern void clear_flushed_tls(struct task_struct *task);
#endif
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/include/asm-um/ptrace-i386.h b/include/asm-um/ptrace-i386.h
index fe882b9..30656c9 100644
--- a/include/asm-um/ptrace-i386.h
+++ b/include/asm-um/ptrace-i386.h
@@ -8,8 +8,11 @@
#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
+#include "linux/compiler.h"
#include "sysdep/ptrace.h"
#include "asm/ptrace-generic.h"
+#include "asm/host_ldt.h"
+#include "choose-mode.h"
#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
@@ -38,15 +41,31 @@
#define user_mode(r) UPT_IS_USER(&(r)->regs)
-#endif
+extern int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc);
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+extern int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc);
+
+extern int do_set_thread_area_skas(struct user_desc *info);
+extern int do_get_thread_area_skas(struct user_desc *info);
+
+extern int do_set_thread_area_tt(struct user_desc *info);
+extern int do_get_thread_area_tt(struct user_desc *info);
+
+extern int arch_switch_tls_skas(struct task_struct *from, struct task_struct *to);
+extern int arch_switch_tls_tt(struct task_struct *from, struct task_struct *to);
+
+static inline int do_get_thread_area(struct user_desc *info)
+{
+ return CHOOSE_MODE_PROC(do_get_thread_area_tt, do_get_thread_area_skas, info);
+}
+
+static inline int do_set_thread_area(struct user_desc *info)
+{
+ return CHOOSE_MODE_PROC(do_set_thread_area_tt, do_set_thread_area_skas, info);
+}
+
+struct task_struct;
+
+#endif
diff --git a/include/asm-um/ptrace-x86_64.h b/include/asm-um/ptrace-x86_64.h
index be51219..c894e68 100644
--- a/include/asm-um/ptrace-x86_64.h
+++ b/include/asm-um/ptrace-x86_64.h
@@ -8,6 +8,8 @@
#define __UM_PTRACE_X86_64_H
#include "linux/compiler.h"
+#include "asm/errno.h"
+#include "asm/host_ldt.h"
#define signal_fault signal_fault_x86_64
#define __FRAME_OFFSETS /* Needed to get the R* macros */
@@ -63,15 +65,26 @@
#define profile_pc(regs) PT_REGS_IP(regs)
-#endif
+static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
+
+static inline void arch_switch_to_tt(struct task_struct *from,
+ struct task_struct *to)
+{
+}
+
+static inline void arch_switch_to_skas(struct task_struct *from,
+ struct task_struct *to)
+{
+}
+
+#endif
diff --git a/include/asm-um/segment.h b/include/asm-um/segment.h
index 55e4030..45183fc 100644
--- a/include/asm-um/segment.h
+++ b/include/asm-um/segment.h
@@ -1,4 +1,10 @@
#ifndef __UM_SEGMENT_H
#define __UM_SEGMENT_H
+extern int host_gdt_entry_tls_min;
+
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_TLS_MIN host_gdt_entry_tls_min
+#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
#endif
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 17b6b07..f166b98 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -27,14 +27,14 @@
#define INIT_THREAD_INFO(tsk) \
{ \
- task: &tsk, \
- exec_domain: &default_exec_domain, \
- flags: 0, \
- cpu: 0, \
- preempt_count: 1, \
- addr_limit: KERNEL_DS, \
- restart_block: { \
- fn: do_no_restart_syscall, \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
}, \
}
diff --git a/include/asm-um/uaccess.h b/include/asm-um/uaccess.h
index 4e460d6..bea5a01 100644
--- a/include/asm-um/uaccess.h
+++ b/include/asm-um/uaccess.h
@@ -57,7 +57,7 @@
({ \
const __typeof__((*(ptr))) __user *private_ptr = (ptr); \
(access_ok(VERIFY_READ, private_ptr, sizeof(*private_ptr)) ? \
- __get_user(x, private_ptr) : ((x) = 0, -EFAULT)); \
+ __get_user(x, private_ptr) : ((x) = (__typeof__(*ptr))0, -EFAULT)); \
})
#define __put_user(x, ptr) \
diff --git a/include/asm-x86_64/local.h b/include/asm-x86_64/local.h
index bf14803..cd17945 100644
--- a/include/asm-x86_64/local.h
+++ b/include/asm-x86_64/local.h
@@ -5,7 +5,7 @@
typedef struct
{
- volatile unsigned long counter;
+ volatile long counter;
} local_t;
#define LOCAL_INIT(i) { (i) }
@@ -13,7 +13,7 @@
#define local_read(v) ((v)->counter)
#define local_set(v,i) (((v)->counter) = (i))
-static __inline__ void local_inc(local_t *v)
+static inline void local_inc(local_t *v)
{
__asm__ __volatile__(
"incq %0"
@@ -21,7 +21,7 @@
:"m" (v->counter));
}
-static __inline__ void local_dec(local_t *v)
+static inline void local_dec(local_t *v)
{
__asm__ __volatile__(
"decq %0"
@@ -29,7 +29,7 @@
:"m" (v->counter));
}
-static __inline__ void local_add(unsigned int i, local_t *v)
+static inline void local_add(long i, local_t *v)
{
__asm__ __volatile__(
"addq %1,%0"
@@ -37,7 +37,7 @@
:"ir" (i), "m" (v->counter));
}
-static __inline__ void local_sub(unsigned int i, local_t *v)
+static inline void local_sub(long i, local_t *v)
{
__asm__ __volatile__(
"subq %1,%0"
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index bb9e543..75e91f5 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -19,20 +19,25 @@
struct backlight_properties {
/* Owner module */
struct module *owner;
- /* Get the backlight power status (0: full on, 1..3: power saving
- modes; 4: full off), see FB_BLANK_XXX */
- int (*get_power)(struct backlight_device *);
- /* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
- int (*set_power)(struct backlight_device *, int power);
- /* Maximal value for brightness (read-only) */
- int max_brightness;
- /* Get current backlight brightness */
+
+ /* Notify the backlight driver some property has changed */
+ int (*update_status)(struct backlight_device *);
+ /* Return the current backlight brightness (accounting for power,
+ fb_blank etc.) */
int (*get_brightness)(struct backlight_device *);
- /* Set backlight brightness (0..max_brightness) */
- int (*set_brightness)(struct backlight_device *, int brightness);
/* Check if given framebuffer device is the one bound to this backlight;
return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
int (*check_fb)(struct fb_info *);
+
+ /* Current User requested brightness (0 - max_brightness) */
+ int brightness;
+ /* Maximal value for brightness (read-only) */
+ int max_brightness;
+ /* Current FB Power mode (0: full on, 1..3: power saving
+ modes; 4: full off), see FB_BLANK_XXX */
+ int power;
+ /* FB Blanking active? (values as for power) */
+ int fb_blank;
};
struct backlight_device {
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index d10bd30..836325e 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -275,6 +275,7 @@
/* appendix may either be NULL or be used for transname suffixes */
extern struct dentry * d_lookup(struct dentry *, struct qstr *);
extern struct dentry * __d_lookup(struct dentry *, struct qstr *);
+extern struct dentry * d_hash_and_lookup(struct dentry *, struct qstr *);
/* validate "insecure" dentry pointer */
extern int d_validate(struct dentry *, struct dentry *);
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
index b2913bb..e8e7471 100644
--- a/include/linux/fadvise.h
+++ b/include/linux/fadvise.h
@@ -18,10 +18,4 @@
#define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */
#endif
-/*
- * Linux-specific fadvise() extensions:
- */
-#define LINUX_FADV_ASYNC_WRITE 32 /* Start writeout on range */
-#define LINUX_FADV_WRITE_WAIT 33 /* Wait upon writeout to range */
-
#endif /* FADVISE_H_INCLUDED */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index d03fadf..315d897 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -839,12 +839,10 @@
#define FB_LEFT_POS(bpp) (32 - bpp)
#define FB_SHIFT_HIGH(val, bits) ((val) >> (bits))
#define FB_SHIFT_LOW(val, bits) ((val) << (bits))
-#define FB_BIT_NR(b) (7 - (b))
#else
#define FB_LEFT_POS(bpp) (0)
#define FB_SHIFT_HIGH(val, bits) ((val) << (bits))
#define FB_SHIFT_LOW(val, bits) ((val) >> (bits))
-#define FB_BIT_NR(b) (b)
#endif
/*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 20fa5f6..4ed7e60 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -757,6 +757,13 @@
extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
extern int fcntl_getlease(struct file *filp);
+/* fs/sync.c */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
+ int flags);
+
/* fs/locks.c */
extern void locks_init_lock(struct file_lock *);
extern void locks_copy_lock(struct file_lock *, struct file_lock *);
@@ -1413,6 +1420,7 @@
#endif
/* fs/char_dev.c */
+#define CHRDEV_MAJOR_HASH_SIZE 255
extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
extern int register_chrdev(unsigned int, const char *,
@@ -1420,25 +1428,17 @@
extern int unregister_chrdev(unsigned int, const char *);
extern void unregister_chrdev_region(dev_t, unsigned);
extern int chrdev_open(struct inode *, struct file *);
-extern int get_chrdev_list(char *);
-extern void *acquire_chrdev_list(void);
-extern int count_chrdev_list(void);
-extern void *get_next_chrdev(void *);
-extern int get_chrdev_info(void *, int *, char **);
-extern void release_chrdev_list(void *);
+extern void chrdev_show(struct seq_file *,off_t);
/* fs/block_dev.c */
+#define BLKDEV_MAJOR_HASH_SIZE 255
#define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */
extern const char *__bdevname(dev_t, char *buffer);
extern const char *bdevname(struct block_device *bdev, char *buffer);
extern struct block_device *lookup_bdev(const char *);
extern struct block_device *open_bdev_excl(const char *, int, void *);
extern void close_bdev_excl(struct block_device *);
-extern void *acquire_blkdev_list(void);
-extern int count_blkdev_list(void);
-extern void *get_next_blkdev(void *);
-extern int get_blkdev_info(void *, int *, char **);
-extern void release_blkdev_list(void *);
+extern void blkdev_show(struct seq_file *,off_t);
extern void init_special_inode(struct inode *, umode_t, dev_t);
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 9383015..b209392 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -58,6 +58,19 @@
};
/**
+ * struct hrtimer_sleeper - simple sleeper structure
+ *
+ * @timer: embedded timer structure
+ * @task: task to wake up
+ *
+ * task is set to NULL, when the timer expires.
+ */
+struct hrtimer_sleeper {
+ struct hrtimer timer;
+ struct task_struct *task;
+};
+
+/**
* struct hrtimer_base - the timer base for a specific clock
*
* @index: clock type index for per_cpu support when moving a timer
@@ -127,6 +140,9 @@
const enum hrtimer_mode mode,
const clockid_t clockid);
+extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
+ struct task_struct *tsk);
+
/* Soft interrupt function to run the hrtimer queues: */
extern void hrtimer_run_queues(void);
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index 5357128..6d9c7e4 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -82,6 +82,13 @@
{
struct module *owner;
+ /* The low-level interface cannot start sending messages to
+ the upper layer until this function is called. This may
+ not be NULL, the lower layer must take the interface from
+ this call. */
+ int (*start_processing)(void *send_info,
+ ipmi_smi_t new_intf);
+
/* Called to enqueue an SMI message to be sent. This
operation is not allowed to fail. If an error occurs, it
should report back the error in a received message. It may
@@ -157,13 +164,16 @@
}
/* Add a low-level interface to the IPMI driver. Note that if the
- interface doesn't know its slave address, it should pass in zero. */
+ interface doesn't know its slave address, it should pass in zero.
+ The low-level interface should not deliver any messages to the
+ upper layer until the start_processing() function in the handlers
+ is called, and the lower layer must get the interface from that
+ call. */
int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
void *send_info,
struct ipmi_device_id *device_id,
struct device *dev,
- unsigned char slave_addr,
- ipmi_smi_t *intf);
+ unsigned char slave_addr);
/*
* Remove a low-level interface from the IPMI driver. This will
diff --git a/include/linux/leds.h b/include/linux/leds.h
new file mode 100644
index 0000000..4617e75
--- /dev/null
+++ b/include/linux/leds.h
@@ -0,0 +1,111 @@
+/*
+ * Driver model for leds and led triggers
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_LEDS_H_INCLUDED
+#define __LINUX_LEDS_H_INCLUDED
+
+struct device;
+struct class_device;
+/*
+ * LED Core
+ */
+
+enum led_brightness {
+ LED_OFF = 0,
+ LED_HALF = 127,
+ LED_FULL = 255,
+};
+
+struct led_classdev {
+ const char *name;
+ int brightness;
+ int flags;
+#define LED_SUSPENDED (1 << 0)
+
+ /* A function to set the brightness of the led */
+ void (*brightness_set)(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+
+ struct class_device *class_dev;
+ /* LED Device linked list */
+ struct list_head node;
+
+ /* Trigger data */
+ char *default_trigger;
+#ifdef CONFIG_LEDS_TRIGGERS
+ rwlock_t trigger_lock;
+ /* Protects the trigger data below */
+
+ struct led_trigger *trigger;
+ struct list_head trig_list;
+ void *trigger_data;
+#endif
+};
+
+extern int led_classdev_register(struct device *parent,
+ struct led_classdev *led_cdev);
+extern void led_classdev_unregister(struct led_classdev *led_cdev);
+extern void led_classdev_suspend(struct led_classdev *led_cdev);
+extern void led_classdev_resume(struct led_classdev *led_cdev);
+
+/*
+ * LED Triggers
+ */
+#ifdef CONFIG_LEDS_TRIGGERS
+
+#define TRIG_NAME_MAX 50
+
+struct led_trigger {
+ /* Trigger Properties */
+ const char *name;
+ void (*activate)(struct led_classdev *led_cdev);
+ void (*deactivate)(struct led_classdev *led_cdev);
+
+ /* LEDs under control by this trigger (for simple triggers) */
+ rwlock_t leddev_list_lock;
+ struct list_head led_cdevs;
+
+ /* Link to next registered trigger */
+ struct list_head next_trig;
+};
+
+/* Registration functions for complex triggers */
+extern int led_trigger_register(struct led_trigger *trigger);
+extern void led_trigger_unregister(struct led_trigger *trigger);
+
+/* Registration functions for simple triggers */
+#define DEFINE_LED_TRIGGER(x) static struct led_trigger *x;
+#define DEFINE_LED_TRIGGER_GLOBAL(x) struct led_trigger *x;
+extern void led_trigger_register_simple(const char *name,
+ struct led_trigger **trigger);
+extern void led_trigger_unregister_simple(struct led_trigger *trigger);
+extern void led_trigger_event(struct led_trigger *trigger,
+ enum led_brightness event);
+
+#else
+
+/* Triggers aren't active - null macros */
+#define DEFINE_LED_TRIGGER(x)
+#define DEFINE_LED_TRIGGER_GLOBAL(x)
+#define led_trigger_register_simple(x, y) do {} while(0)
+#define led_trigger_unregister_simple(x) do {} while(0)
+#define led_trigger_event(x, y) do {} while(0)
+
+#endif
+
+/* Trigger specific functions */
+#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
+extern void ledtrig_ide_activity(void);
+#else
+#define ledtrig_ide_activity() do {} while(0)
+#endif
+
+#endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index 7d09962..ff0a640 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -12,7 +12,7 @@
extern int migrate_page_remove_references(struct page *, struct page *, int);
extern int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed);
-int migrate_pages_to(struct list_head *pagelist,
+extern int migrate_pages_to(struct list_head *pagelist,
struct vm_area_struct *vma, int dest);
extern int fail_migrate_page(struct page *, struct page *);
@@ -26,6 +26,9 @@
static inline int migrate_pages(struct list_head *l, struct list_head *t,
struct list_head *moved, struct list_head *failed) { return -ENOSYS; }
+static inline int migrate_pages_to(struct list_head *pagelist,
+ struct vm_area_struct *vma, int dest) { return 0; }
+
static inline int migrate_prep(void) { return -ENOSYS; }
/* Possible settings for the migrate_page() method in address_operations */
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index f46afec..72fc68c 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -10,7 +10,7 @@
#ifndef __MTD_TRANS_H__
#define __MTD_TRANS_H__
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
struct hd_geometry;
struct mtd_info;
@@ -22,7 +22,7 @@
struct mtd_blktrans_ops *tr;
struct list_head list;
struct mtd_info *mtd;
- struct semaphore sem;
+ struct mutex lock;
int devnum;
int blksize;
unsigned long size;
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 386a52c..9addd07 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -15,7 +15,7 @@
#define __MTD_DOC2000_H__
#include <linux/mtd/mtd.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#define DoC_Sig1 0
#define DoC_Sig2 1
@@ -187,7 +187,7 @@
int numchips;
struct Nand *chips;
struct mtd_info *nextdoc;
- struct semaphore lock;
+ struct mutex lock;
};
int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 0268125..d7eaa40 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -52,6 +52,11 @@
int INFTL_mount(struct INFTLrecord *s);
int INFTL_formatblock(struct INFTLrecord *s, int block);
+extern char inftlmountrev[];
+
+void INFTL_dumptables(struct INFTLrecord *s);
+void INFTL_dumpVUchains(struct INFTLrecord *s);
+
#endif /* __KERNEL__ */
#endif /* __MTD_INFTL_H__ */
diff --git a/include/linux/namei.h b/include/linux/namei.h
index e669801..58cb3d3 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -75,7 +75,6 @@
extern void release_open_intent(struct nameidata *);
extern struct dentry * lookup_one_len(const char *, struct dentry *, int);
-extern __deprecated_for_modules struct dentry * lookup_hash(struct nameidata *);
extern int follow_down(struct vfsmount **, struct dentry **);
extern int follow_up(struct vfsmount **, struct dentry **);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 950dc55..40ccf8c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -598,20 +598,7 @@
#define HAVE_NETIF_QUEUE
-static inline void __netif_schedule(struct net_device *dev)
-{
- if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) {
- unsigned long flags;
- struct softnet_data *sd;
-
- local_irq_save(flags);
- sd = &__get_cpu_var(softnet_data);
- dev->next_sched = sd->output_queue;
- sd->output_queue = dev;
- raise_softirq_irqoff(NET_TX_SOFTIRQ);
- local_irq_restore(flags);
- }
-}
+extern void __netif_schedule(struct net_device *dev);
static inline void netif_schedule(struct net_device *dev)
{
@@ -675,13 +662,7 @@
/* Use this variant in places where it could be invoked
* either from interrupt or non-interrupt context.
*/
-static inline void dev_kfree_skb_any(struct sk_buff *skb)
-{
- if (in_irq() || irqs_disabled())
- dev_kfree_skb_irq(skb);
- else
- dev_kfree_skb(skb);
-}
+extern void dev_kfree_skb_any(struct sk_buff *skb);
#define HAVE_NETIF_RX 1
extern int netif_rx(struct sk_buff *skb);
@@ -768,22 +749,9 @@
return test_bit(__LINK_STATE_PRESENT, &dev->state);
}
-static inline void netif_device_detach(struct net_device *dev)
-{
- if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
- netif_running(dev)) {
- netif_stop_queue(dev);
- }
-}
+extern void netif_device_detach(struct net_device *dev);
-static inline void netif_device_attach(struct net_device *dev)
-{
- if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
- netif_running(dev)) {
- netif_wake_queue(dev);
- __netdev_watchdog_up(dev);
- }
-}
+extern void netif_device_attach(struct net_device *dev);
/*
* Network interface message level settings
@@ -851,20 +819,7 @@
* already been called and returned 1.
*/
-static inline void __netif_rx_schedule(struct net_device *dev)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- dev_hold(dev);
- list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
- if (dev->quota < 0)
- dev->quota += dev->weight;
- else
- dev->quota = dev->weight;
- __raise_softirq_irqoff(NET_RX_SOFTIRQ);
- local_irq_restore(flags);
-}
+extern void __netif_rx_schedule(struct net_device *dev);
/* Try to reschedule poll. Called by irq handler. */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 839f0b3..9539efd 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -72,8 +72,8 @@
unsigned long index);
extern struct page * find_lock_page(struct address_space *mapping,
unsigned long index);
-extern struct page * find_trylock_page(struct address_space *mapping,
- unsigned long index);
+extern __deprecated_for_modules struct page * find_trylock_page(
+ struct address_space *mapping, unsigned long index);
extern struct page * find_or_create_page(struct address_space *mapping,
unsigned long index, gfp_t gfp_mask);
unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 5b9082c..29960b0 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -1,6 +1,8 @@
#ifndef _LINUX_PID_H
#define _LINUX_PID_H
+#include <linux/rcupdate.h>
+
enum pid_type
{
PIDTYPE_PID,
@@ -9,45 +11,109 @@
PIDTYPE_MAX
};
+/*
+ * What is struct pid?
+ *
+ * A struct pid is the kernel's internal notion of a process identifier.
+ * It refers to individual tasks, process groups, and sessions. While
+ * there are processes attached to it the struct pid lives in a hash
+ * table, so it and then the processes that it refers to can be found
+ * quickly from the numeric pid value. The attached processes may be
+ * quickly accessed by following pointers from struct pid.
+ *
+ * Storing pid_t values in the kernel and refering to them later has a
+ * problem. The process originally with that pid may have exited and the
+ * pid allocator wrapped, and another process could have come along
+ * and been assigned that pid.
+ *
+ * Referring to user space processes by holding a reference to struct
+ * task_struct has a problem. When the user space process exits
+ * the now useless task_struct is still kept. A task_struct plus a
+ * stack consumes around 10K of low kernel memory. More precisely
+ * this is THREAD_SIZE + sizeof(struct task_struct). By comparison
+ * a struct pid is about 64 bytes.
+ *
+ * Holding a reference to struct pid solves both of these problems.
+ * It is small so holding a reference does not consume a lot of
+ * resources, and since a new struct pid is allocated when the numeric
+ * pid value is reused we don't mistakenly refer to new processes.
+ */
+
struct pid
{
+ atomic_t count;
/* Try to keep pid_chain in the same cacheline as nr for find_pid */
int nr;
struct hlist_node pid_chain;
- /* list of pids with the same nr, only one of them is in the hash */
- struct list_head pid_list;
+ /* lists of tasks that use this pid */
+ struct hlist_head tasks[PIDTYPE_MAX];
+ struct rcu_head rcu;
};
-#define pid_task(elem, type) \
- list_entry(elem, struct task_struct, pids[type].pid_list)
+struct pid_link
+{
+ struct hlist_node node;
+ struct pid *pid;
+};
+
+static inline struct pid *get_pid(struct pid *pid)
+{
+ if (pid)
+ atomic_inc(&pid->count);
+ return pid;
+}
+
+extern void FASTCALL(put_pid(struct pid *pid));
+extern struct task_struct *FASTCALL(pid_task(struct pid *pid, enum pid_type));
+extern struct task_struct *FASTCALL(get_pid_task(struct pid *pid,
+ enum pid_type));
/*
* attach_pid() and detach_pid() must be called with the tasklist_lock
* write-held.
*/
-extern int FASTCALL(attach_pid(struct task_struct *task, enum pid_type type, int nr));
+extern int FASTCALL(attach_pid(struct task_struct *task,
+ enum pid_type type, int nr));
extern void FASTCALL(detach_pid(struct task_struct *task, enum pid_type));
/*
* look up a PID in the hash table. Must be called with the tasklist_lock
- * held.
+ * or rcu_read_lock() held.
*/
-extern struct pid *FASTCALL(find_pid(enum pid_type, int));
+extern struct pid *FASTCALL(find_pid(int nr));
-extern int alloc_pidmap(void);
-extern void FASTCALL(free_pidmap(int));
+/*
+ * Lookup a PID in the hash table, and return with it's count elevated.
+ */
+extern struct pid *find_get_pid(int nr);
+extern struct pid *alloc_pid(void);
+extern void FASTCALL(free_pid(struct pid *pid));
+
+#define pid_next(task, type) \
+ ((task)->pids[(type)].node.next)
+
+#define pid_next_task(task, type) \
+ hlist_entry(pid_next(task, type), struct task_struct, \
+ pids[(type)].node)
+
+
+/* We could use hlist_for_each_entry_rcu here but it takes more arguments
+ * than the do_each_task_pid/while_each_task_pid. So we roll our own
+ * to preserve the existing interface.
+ */
#define do_each_task_pid(who, type, task) \
if ((task = find_task_by_pid_type(type, who))) { \
- prefetch((task)->pids[type].pid_list.next); \
+ prefetch(pid_next(task, type)); \
do {
#define while_each_task_pid(who, type, task) \
- } while (task = pid_task((task)->pids[type].pid_list.next,\
- type), \
- prefetch((task)->pids[type].pid_list.next), \
- hlist_unhashed(&(task)->pids[type].pid_chain)); \
- } \
+ } while (pid_next(task, type) && ({ \
+ task = pid_next_task(task, type); \
+ rcu_dereference(task); \
+ prefetch(pid_next(task, type)); \
+ 1; }) ); \
+ }
#endif /* _LINUX_PID_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d04186d..541f482 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -100,6 +100,7 @@
extern int nr_processes(void);
extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
+extern unsigned long nr_active(void);
extern unsigned long nr_iowait(void);
#include <linux/time.h>
@@ -483,6 +484,7 @@
#define MAX_PRIO (MAX_RT_PRIO + 40)
#define rt_task(p) (unlikely((p)->prio < MAX_RT_PRIO))
+#define batch_task(p) (unlikely((p)->policy == SCHED_BATCH))
/*
* Some day this will be a full-fledged user tracking system..
@@ -683,6 +685,13 @@
struct audit_context; /* See audit.c */
struct mempolicy;
+enum sleep_type {
+ SLEEP_NORMAL,
+ SLEEP_NONINTERACTIVE,
+ SLEEP_INTERACTIVE,
+ SLEEP_INTERRUPTED,
+};
+
struct task_struct {
volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */
struct thread_info *thread_info;
@@ -705,7 +714,7 @@
unsigned long sleep_avg;
unsigned long long timestamp, last_ran;
unsigned long long sched_time; /* sched_clock time spent running */
- int activated;
+ enum sleep_type sleep_type;
unsigned long policy;
cpumask_t cpus_allowed;
@@ -751,7 +760,7 @@
struct task_struct *group_leader; /* threadgroup leader */
/* PID/PID hash table linkage. */
- struct pid pids[PIDTYPE_MAX];
+ struct pid_link pids[PIDTYPE_MAX];
struct list_head thread_group;
struct completion *vfork_done; /* for vfork() */
@@ -890,18 +899,19 @@
*/
static inline int pid_alive(struct task_struct *p)
{
- return p->pids[PIDTYPE_PID].nr != 0;
+ return p->pids[PIDTYPE_PID].pid != NULL;
}
extern void free_task(struct task_struct *tsk);
#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
extern void __put_task_struct_cb(struct rcu_head *rhp);
+extern void __put_task_struct(struct task_struct *t);
static inline void put_task_struct(struct task_struct *t)
{
if (atomic_dec_and_test(&t->usage))
- call_rcu(&t->rcu, __put_task_struct_cb);
+ __put_task_struct(t);
}
/*
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 613b951..c4619a4 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -941,6 +941,25 @@
#define NET_IP_ALIGN 2
#endif
+/*
+ * The networking layer reserves some headroom in skb data (via
+ * dev_alloc_skb). This is used to avoid having to reallocate skb data when
+ * the header has to grow. In the default case, if the header has to grow
+ * 16 bytes or less we avoid the reallocation.
+ *
+ * Unfortunately this headroom changes the DMA alignment of the resulting
+ * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
+ * on some architectures. An architecture can override this value,
+ * perhaps setting it to a cacheline in size (since that will maintain
+ * cacheline alignment of the DMA). It must be a power of 2.
+ *
+ * Various parts of the networking layer expect at least 16 bytes of
+ * headroom, you should not reduce this.
+ */
+#ifndef NET_SKB_PAD
+#define NET_SKB_PAD 16
+#endif
+
extern int ___pskb_trim(struct sk_buff *skb, unsigned int len, int realloc);
static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
@@ -1030,9 +1049,9 @@
static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
gfp_t gfp_mask)
{
- struct sk_buff *skb = alloc_skb(length + 16, gfp_mask);
+ struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
if (likely(skb))
- skb_reserve(skb, 16);
+ skb_reserve(skb, NET_SKB_PAD);
return skb;
}
#else
@@ -1070,13 +1089,15 @@
*/
static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
{
- int delta = (headroom > 16 ? headroom : 16) - skb_headroom(skb);
+ int delta = (headroom > NET_SKB_PAD ? headroom : NET_SKB_PAD) -
+ skb_headroom(skb);
if (delta < 0)
delta = 0;
if (delta || skb_cloned(skb))
- return pskb_expand_head(skb, (delta + 15) & ~15, 0, GFP_ATOMIC);
+ return pskb_expand_head(skb, (delta + (NET_SKB_PAD-1)) &
+ ~(NET_SKB_PAD-1), 0, GFP_ATOMIC);
return 0;
}
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index e78ffc7..5717147 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -571,5 +571,7 @@
asmlinkage long sys_unshare(unsigned long unshare_flags);
asmlinkage long sys_splice(int fdin, int fdout, size_t len,
unsigned int flags);
+asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
+ int flags);
#endif
diff --git a/include/linux/timer.h b/include/linux/timer.h
index b5caabc..0a485be 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -6,7 +6,7 @@
#include <linux/spinlock.h>
#include <linux/stddef.h>
-struct timer_base_s;
+struct tvec_t_base_s;
struct timer_list {
struct list_head entry;
@@ -15,16 +15,16 @@
void (*function)(unsigned long);
unsigned long data;
- struct timer_base_s *base;
+ struct tvec_t_base_s *base;
};
-extern struct timer_base_s __init_timer_base;
+extern struct tvec_t_base_s boot_tvec_bases;
#define TIMER_INITIALIZER(_function, _expires, _data) { \
.function = (_function), \
.expires = (_expires), \
.data = (_data), \
- .base = &__init_timer_base, \
+ .base = &boot_tvec_bases, \
}
#define DEFINE_TIMER(_name, _function, _expires, _data) \
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
index 2c9e847..4756862 100644
--- a/include/linux/tiocl.h
+++ b/include/linux/tiocl.h
@@ -34,5 +34,6 @@
#define TIOCL_SCROLLCONSOLE 13 /* scroll console */
#define TIOCL_BLANKSCREEN 14 /* keep screen blank even if a key is pressed */
#define TIOCL_BLANKEDSCREEN 15 /* return which vt was blanked */
+#define TIOCL_GETKMSGREDIRECT 17 /* get the vt the kernel messages are restricted to */
#endif /* _LINUX_TIOCL_H */
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 9418f4d..3c989db 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -405,9 +405,6 @@
extern void tcp_unhash(struct sock *sk);
-extern int tcp_v4_hash_connecting(struct sock *sk);
-
-
/* From syncookies.c */
extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
struct ip_options *opt);
diff --git a/kernel/acct.c b/kernel/acct.c
index 065d8b4..b327f4d 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -449,8 +449,8 @@
/* calculate run_time in nsec*/
do_posix_clock_monotonic_gettime(&uptime);
run_time = (u64)uptime.tv_sec*NSEC_PER_SEC + uptime.tv_nsec;
- run_time -= (u64)current->start_time.tv_sec*NSEC_PER_SEC
- + current->start_time.tv_nsec;
+ run_time -= (u64)current->group_leader->start_time.tv_sec * NSEC_PER_SEC
+ + current->group_leader->start_time.tv_nsec;
/* convert nsec -> AHZ */
elapsed = nsec_to_AHZ(run_time);
#if ACCT_VERSION==3
@@ -469,10 +469,10 @@
#endif
do_div(elapsed, AHZ);
ac.ac_btime = xtime.tv_sec - elapsed;
- jiffies = cputime_to_jiffies(cputime_add(current->group_leader->utime,
+ jiffies = cputime_to_jiffies(cputime_add(current->utime,
current->signal->utime));
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(jiffies));
- jiffies = cputime_to_jiffies(cputime_add(current->group_leader->stime,
+ jiffies = cputime_to_jiffies(cputime_add(current->stime,
current->signal->stime));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(jiffies));
/* we really need to bite the bullet and change layout */
@@ -522,9 +522,9 @@
ac.ac_io = encode_comp_t(0 /* current->io_usage */); /* %% */
ac.ac_rw = encode_comp_t(ac.ac_io / 1024);
ac.ac_minflt = encode_comp_t(current->signal->min_flt +
- current->group_leader->min_flt);
+ current->min_flt);
ac.ac_majflt = encode_comp_t(current->signal->maj_flt +
- current->group_leader->maj_flt);
+ current->maj_flt);
ac.ac_swaps = encode_comp_t(0);
ac.ac_exitcode = exitcode;
diff --git a/kernel/audit.c b/kernel/audit.c
index 04fe2e3..c8ccbd0 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -578,7 +578,7 @@
audit_initialized ? "" : " (after initialization)");
if (audit_initialized)
audit_enabled = audit_default;
- return 0;
+ return 1;
}
__setup("audit=", audit_enable);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 18aea1b..72248d1 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -616,12 +616,10 @@
* current->cpuset if a task has its memory placement changed.
* Do not call this routine if in_interrupt().
*
- * Call without callback_mutex or task_lock() held. May be called
- * with or without manage_mutex held. Doesn't need task_lock to guard
- * against another task changing a non-NULL cpuset pointer to NULL,
- * as that is only done by a task on itself, and if the current task
- * is here, it is not simultaneously in the exit code NULL'ing its
- * cpuset pointer. This routine also might acquire callback_mutex and
+ * Call without callback_mutex or task_lock() held. May be
+ * called with or without manage_mutex held. Thanks in part to
+ * 'the_top_cpuset_hack', the tasks cpuset pointer will never
+ * be NULL. This routine also might acquire callback_mutex and
* current->mm->mmap_sem during call.
*
* Reading current->cpuset->mems_generation doesn't need task_lock
@@ -836,6 +834,55 @@
}
/*
+ * cpuset_migrate_mm
+ *
+ * Migrate memory region from one set of nodes to another.
+ *
+ * Temporarilly set tasks mems_allowed to target nodes of migration,
+ * so that the migration code can allocate pages on these nodes.
+ *
+ * Call holding manage_mutex, so our current->cpuset won't change
+ * during this call, as manage_mutex holds off any attach_task()
+ * calls. Therefore we don't need to take task_lock around the
+ * call to guarantee_online_mems(), as we know no one is changing
+ * our tasks cpuset.
+ *
+ * Hold callback_mutex around the two modifications of our tasks
+ * mems_allowed to synchronize with cpuset_mems_allowed().
+ *
+ * While the mm_struct we are migrating is typically from some
+ * other task, the task_struct mems_allowed that we are hacking
+ * is for our current task, which must allocate new pages for that
+ * migrating memory region.
+ *
+ * We call cpuset_update_task_memory_state() before hacking
+ * our tasks mems_allowed, so that we are assured of being in
+ * sync with our tasks cpuset, and in particular, callbacks to
+ * cpuset_update_task_memory_state() from nested page allocations
+ * won't see any mismatch of our cpuset and task mems_generation
+ * values, so won't overwrite our hacked tasks mems_allowed
+ * nodemask.
+ */
+
+static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
+ const nodemask_t *to)
+{
+ struct task_struct *tsk = current;
+
+ cpuset_update_task_memory_state();
+
+ mutex_lock(&callback_mutex);
+ tsk->mems_allowed = *to;
+ mutex_unlock(&callback_mutex);
+
+ do_migrate_pages(mm, from, to, MPOL_MF_MOVE_ALL);
+
+ mutex_lock(&callback_mutex);
+ guarantee_online_mems(tsk->cpuset, &tsk->mems_allowed);
+ mutex_unlock(&callback_mutex);
+}
+
+/*
* Handle user request to change the 'mems' memory placement
* of a cpuset. Needs to validate the request, update the
* cpusets mems_allowed and mems_generation, and for each
@@ -947,10 +994,8 @@
struct mm_struct *mm = mmarray[i];
mpol_rebind_mm(mm, &cs->mems_allowed);
- if (migrate) {
- do_migrate_pages(mm, &oldmem, &cs->mems_allowed,
- MPOL_MF_MOVE_ALL);
- }
+ if (migrate)
+ cpuset_migrate_mm(mm, &oldmem, &cs->mems_allowed);
mmput(mm);
}
@@ -1185,11 +1230,11 @@
mm = get_task_mm(tsk);
if (mm) {
mpol_rebind_mm(mm, &to);
+ if (is_memory_migrate(cs))
+ cpuset_migrate_mm(mm, &from, &to);
mmput(mm);
}
- if (is_memory_migrate(cs))
- do_migrate_pages(tsk->mm, &from, &to, MPOL_MF_MOVE_ALL);
put_task_struct(tsk);
synchronize_rcu();
if (atomic_dec_and_test(&oldcs->count))
diff --git a/kernel/exit.c b/kernel/exit.c
index bc0ec67..6c2eeb8 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -127,6 +127,11 @@
}
}
+static void delayed_put_task_struct(struct rcu_head *rhp)
+{
+ put_task_struct(container_of(rhp, struct task_struct, rcu));
+}
+
void release_task(struct task_struct * p)
{
int zap_leader;
@@ -168,7 +173,7 @@
spin_unlock(&p->proc_lock);
proc_pid_flush(proc_dentry);
release_thread(p);
- put_task_struct(p);
+ call_rcu(&p->rcu, delayed_put_task_struct);
p = leader;
if (unlikely(zap_leader))
diff --git a/kernel/fork.c b/kernel/fork.c
index b3f7a1b..3384eb8 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -108,10 +108,8 @@
}
EXPORT_SYMBOL(free_task);
-void __put_task_struct_cb(struct rcu_head *rhp)
+void __put_task_struct(struct task_struct *tsk)
{
- struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
-
WARN_ON(!(tsk->exit_state & (EXIT_DEAD | EXIT_ZOMBIE)));
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
@@ -126,6 +124,12 @@
free_task(tsk);
}
+void __put_task_struct_cb(struct rcu_head *rhp)
+{
+ struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
+ __put_task_struct(tsk);
+}
+
void __init fork_init(unsigned long mempages)
{
#ifndef __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
@@ -721,7 +725,7 @@
free_fdset (new_fdt->open_fds, new_fdt->max_fdset);
free_fd_array(new_fdt->fd, new_fdt->max_fds);
kmem_cache_free(files_cachep, newf);
- goto out;
+ return NULL;
}
static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
@@ -1311,17 +1315,19 @@
{
struct task_struct *p;
int trace = 0;
- long pid = alloc_pidmap();
+ struct pid *pid = alloc_pid();
+ long nr;
- if (pid < 0)
+ if (!pid)
return -EAGAIN;
+ nr = pid->nr;
if (unlikely(current->ptrace)) {
trace = fork_traceflag (clone_flags);
if (trace)
clone_flags |= CLONE_PTRACE;
}
- p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, pid);
+ p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, nr);
/*
* Do this prior waking up the new thread - the thread pointer
* might get invalid after that point, if the thread exits quickly.
@@ -1348,7 +1354,7 @@
p->state = TASK_STOPPED;
if (unlikely (trace)) {
- current->ptrace_message = pid;
+ current->ptrace_message = nr;
ptrace_notify ((trace << 8) | SIGTRAP);
}
@@ -1358,10 +1364,10 @@
ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP);
}
} else {
- free_pidmap(pid);
- pid = PTR_ERR(p);
+ free_pid(pid);
+ nr = PTR_ERR(p);
}
- return pid;
+ return nr;
}
#ifndef ARCH_MIN_MMSTRUCT_ALIGN
diff --git a/kernel/futex.c b/kernel/futex.c
index 9c9b2b6..5699c51 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1039,9 +1039,11 @@
unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
int val2 = 0;
- if ((op == FUTEX_WAIT) && utime) {
+ if (utime && (op == FUTEX_WAIT)) {
if (copy_from_user(&t, utime, sizeof(t)) != 0)
return -EFAULT;
+ if (!timespec_valid(&t))
+ return -EINVAL;
timeout = timespec_to_jiffies(&t) + 1;
}
/*
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 54274fc..1ab6a0e 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -129,9 +129,11 @@
unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
int val2 = 0;
- if ((op == FUTEX_WAIT) && utime) {
+ if (utime && (op == FUTEX_WAIT)) {
if (get_compat_timespec(&t, utime))
return -EFAULT;
+ if (!timespec_valid(&t))
+ return -EINVAL;
timeout = timespec_to_jiffies(&t) + 1;
}
if (op >= FUTEX_REQUEUE)
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 0237a55..f181ff4 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -606,6 +606,9 @@
{
struct rb_node *node;
+ if (!base->first)
+ return;
+
if (base->get_softirq_time)
base->softirq_time = base->get_softirq_time();
@@ -655,29 +658,28 @@
/*
* Sleep related functions:
*/
-
-struct sleep_hrtimer {
- struct hrtimer timer;
- struct task_struct *task;
- int expired;
-};
-
-static int nanosleep_wakeup(struct hrtimer *timer)
+static int hrtimer_wakeup(struct hrtimer *timer)
{
- struct sleep_hrtimer *t =
- container_of(timer, struct sleep_hrtimer, timer);
+ struct hrtimer_sleeper *t =
+ container_of(timer, struct hrtimer_sleeper, timer);
+ struct task_struct *task = t->task;
- t->expired = 1;
- wake_up_process(t->task);
+ t->task = NULL;
+ if (task)
+ wake_up_process(task);
return HRTIMER_NORESTART;
}
-static int __sched do_nanosleep(struct sleep_hrtimer *t, enum hrtimer_mode mode)
+void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, task_t *task)
{
- t->timer.function = nanosleep_wakeup;
- t->task = current;
- t->expired = 0;
+ sl->timer.function = hrtimer_wakeup;
+ sl->task = task;
+}
+
+static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
+{
+ hrtimer_init_sleeper(t, current);
do {
set_current_state(TASK_INTERRUPTIBLE);
@@ -685,18 +687,17 @@
schedule();
- if (unlikely(!t->expired)) {
- hrtimer_cancel(&t->timer);
- mode = HRTIMER_ABS;
- }
- } while (!t->expired && !signal_pending(current));
+ hrtimer_cancel(&t->timer);
+ mode = HRTIMER_ABS;
- return t->expired;
+ } while (t->task && !signal_pending(current));
+
+ return t->task == NULL;
}
static long __sched nanosleep_restart(struct restart_block *restart)
{
- struct sleep_hrtimer t;
+ struct hrtimer_sleeper t;
struct timespec __user *rmtp;
struct timespec tu;
ktime_t time;
@@ -729,7 +730,7 @@
const enum hrtimer_mode mode, const clockid_t clockid)
{
struct restart_block *restart;
- struct sleep_hrtimer t;
+ struct hrtimer_sleeper t;
struct timespec tu;
ktime_t rem;
diff --git a/kernel/module.c b/kernel/module.c
index bd088a7..d24deb0 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1254,6 +1254,7 @@
|| strcmp(license, "GPL v2") == 0
|| strcmp(license, "GPL and additional rights") == 0
|| strcmp(license, "Dual BSD/GPL") == 0
+ || strcmp(license, "Dual MIT/GPL") == 0
|| strcmp(license, "Dual MPL/GPL") == 0);
}
diff --git a/kernel/pid.c b/kernel/pid.c
index a9f2dfd..eeb836b 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -28,8 +28,9 @@
#include <linux/hash.h>
#define pid_hashfn(nr) hash_long((unsigned long)nr, pidhash_shift)
-static struct hlist_head *pid_hash[PIDTYPE_MAX];
+static struct hlist_head *pid_hash;
static int pidhash_shift;
+static kmem_cache_t *pid_cachep;
int pid_max = PID_MAX_DEFAULT;
int last_pid;
@@ -60,9 +61,22 @@
static pidmap_t pidmap_array[PIDMAP_ENTRIES] =
{ [ 0 ... PIDMAP_ENTRIES-1 ] = { ATOMIC_INIT(BITS_PER_PAGE), NULL } };
+/*
+ * Note: disable interrupts while the pidmap_lock is held as an
+ * interrupt might come in and do read_lock(&tasklist_lock).
+ *
+ * If we don't disable interrupts there is a nasty deadlock between
+ * detach_pid()->free_pid() and another cpu that does
+ * spin_lock(&pidmap_lock) followed by an interrupt routine that does
+ * read_lock(&tasklist_lock);
+ *
+ * After we clean up the tasklist_lock and know there are no
+ * irq handlers that take it we can leave the interrupts enabled.
+ * For now it is easier to be safe than to prove it can't happen.
+ */
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
-fastcall void free_pidmap(int pid)
+static fastcall void free_pidmap(int pid)
{
pidmap_t *map = pidmap_array + pid / BITS_PER_PAGE;
int offset = pid & BITS_PER_PAGE_MASK;
@@ -71,7 +85,7 @@
atomic_inc(&map->nr_free);
}
-int alloc_pidmap(void)
+static int alloc_pidmap(void)
{
int i, offset, max_scan, pid, last = last_pid;
pidmap_t *map;
@@ -89,12 +103,12 @@
* Free the page if someone raced with us
* installing it:
*/
- spin_lock(&pidmap_lock);
+ spin_lock_irq(&pidmap_lock);
if (map->page)
free_page(page);
else
map->page = (void *)page;
- spin_unlock(&pidmap_lock);
+ spin_unlock_irq(&pidmap_lock);
if (unlikely(!map->page))
break;
}
@@ -131,13 +145,73 @@
return -1;
}
-struct pid * fastcall find_pid(enum pid_type type, int nr)
+fastcall void put_pid(struct pid *pid)
+{
+ if (!pid)
+ return;
+ if ((atomic_read(&pid->count) == 1) ||
+ atomic_dec_and_test(&pid->count))
+ kmem_cache_free(pid_cachep, pid);
+}
+
+static void delayed_put_pid(struct rcu_head *rhp)
+{
+ struct pid *pid = container_of(rhp, struct pid, rcu);
+ put_pid(pid);
+}
+
+fastcall void free_pid(struct pid *pid)
+{
+ /* We can be called with write_lock_irq(&tasklist_lock) held */
+ unsigned long flags;
+
+ spin_lock_irqsave(&pidmap_lock, flags);
+ hlist_del_rcu(&pid->pid_chain);
+ spin_unlock_irqrestore(&pidmap_lock, flags);
+
+ free_pidmap(pid->nr);
+ call_rcu(&pid->rcu, delayed_put_pid);
+}
+
+struct pid *alloc_pid(void)
+{
+ struct pid *pid;
+ enum pid_type type;
+ int nr = -1;
+
+ pid = kmem_cache_alloc(pid_cachep, GFP_KERNEL);
+ if (!pid)
+ goto out;
+
+ nr = alloc_pidmap();
+ if (nr < 0)
+ goto out_free;
+
+ atomic_set(&pid->count, 1);
+ pid->nr = nr;
+ for (type = 0; type < PIDTYPE_MAX; ++type)
+ INIT_HLIST_HEAD(&pid->tasks[type]);
+
+ spin_lock_irq(&pidmap_lock);
+ hlist_add_head_rcu(&pid->pid_chain, &pid_hash[pid_hashfn(pid->nr)]);
+ spin_unlock_irq(&pidmap_lock);
+
+out:
+ return pid;
+
+out_free:
+ kmem_cache_free(pid_cachep, pid);
+ pid = NULL;
+ goto out;
+}
+
+struct pid * fastcall find_pid(int nr)
{
struct hlist_node *elem;
struct pid *pid;
hlist_for_each_entry_rcu(pid, elem,
- &pid_hash[type][pid_hashfn(nr)], pid_chain) {
+ &pid_hash[pid_hashfn(nr)], pid_chain) {
if (pid->nr == nr)
return pid;
}
@@ -146,77 +220,82 @@
int fastcall attach_pid(task_t *task, enum pid_type type, int nr)
{
- struct pid *pid, *task_pid;
+ struct pid_link *link;
+ struct pid *pid;
- task_pid = &task->pids[type];
- pid = find_pid(type, nr);
- task_pid->nr = nr;
- if (pid == NULL) {
- INIT_LIST_HEAD(&task_pid->pid_list);
- hlist_add_head_rcu(&task_pid->pid_chain,
- &pid_hash[type][pid_hashfn(nr)]);
- } else {
- INIT_HLIST_NODE(&task_pid->pid_chain);
- list_add_tail_rcu(&task_pid->pid_list, &pid->pid_list);
- }
+ WARN_ON(!task->pid); /* to be removed soon */
+ WARN_ON(!nr); /* to be removed soon */
+
+ link = &task->pids[type];
+ link->pid = pid = find_pid(nr);
+ hlist_add_head_rcu(&link->node, &pid->tasks[type]);
return 0;
}
-static fastcall int __detach_pid(task_t *task, enum pid_type type)
-{
- struct pid *pid, *pid_next;
- int nr = 0;
-
- pid = &task->pids[type];
- if (!hlist_unhashed(&pid->pid_chain)) {
-
- if (list_empty(&pid->pid_list)) {
- nr = pid->nr;
- hlist_del_rcu(&pid->pid_chain);
- } else {
- pid_next = list_entry(pid->pid_list.next,
- struct pid, pid_list);
- /* insert next pid from pid_list to hash */
- hlist_replace_rcu(&pid->pid_chain,
- &pid_next->pid_chain);
- }
- }
-
- list_del_rcu(&pid->pid_list);
- pid->nr = 0;
-
- return nr;
-}
-
void fastcall detach_pid(task_t *task, enum pid_type type)
{
- int tmp, nr;
+ struct pid_link *link;
+ struct pid *pid;
+ int tmp;
- nr = __detach_pid(task, type);
- if (!nr)
- return;
+ link = &task->pids[type];
+ pid = link->pid;
+
+ hlist_del_rcu(&link->node);
+ link->pid = NULL;
for (tmp = PIDTYPE_MAX; --tmp >= 0; )
- if (tmp != type && find_pid(tmp, nr))
+ if (!hlist_empty(&pid->tasks[tmp]))
return;
- free_pidmap(nr);
+ free_pid(pid);
}
+struct task_struct * fastcall pid_task(struct pid *pid, enum pid_type type)
+{
+ struct task_struct *result = NULL;
+ if (pid) {
+ struct hlist_node *first;
+ first = rcu_dereference(pid->tasks[type].first);
+ if (first)
+ result = hlist_entry(first, struct task_struct, pids[(type)].node);
+ }
+ return result;
+}
+
+/*
+ * Must be called under rcu_read_lock() or with tasklist_lock read-held.
+ */
task_t *find_task_by_pid_type(int type, int nr)
{
- struct pid *pid;
-
- pid = find_pid(type, nr);
- if (!pid)
- return NULL;
-
- return pid_task(&pid->pid_list, type);
+ return pid_task(find_pid(nr), type);
}
EXPORT_SYMBOL(find_task_by_pid_type);
+struct task_struct *fastcall get_pid_task(struct pid *pid, enum pid_type type)
+{
+ struct task_struct *result;
+ rcu_read_lock();
+ result = pid_task(pid, type);
+ if (result)
+ get_task_struct(result);
+ rcu_read_unlock();
+ return result;
+}
+
+struct pid *find_get_pid(pid_t nr)
+{
+ struct pid *pid;
+
+ rcu_read_lock();
+ pid = get_pid(find_pid(nr));
+ rcu_read_unlock();
+
+ return pid;
+}
+
/*
* The pid hash table is scaled according to the amount of memory in the
* machine. From a minimum of 16 slots up to 4096 slots at one gigabyte or
@@ -224,7 +303,7 @@
*/
void __init pidhash_init(void)
{
- int i, j, pidhash_size;
+ int i, pidhash_size;
unsigned long megabytes = nr_kernel_pages >> (20 - PAGE_SHIFT);
pidhash_shift = max(4, fls(megabytes * 4));
@@ -233,16 +312,13 @@
printk("PID hash table entries: %d (order: %d, %Zd bytes)\n",
pidhash_size, pidhash_shift,
- PIDTYPE_MAX * pidhash_size * sizeof(struct hlist_head));
+ pidhash_size * sizeof(struct hlist_head));
- for (i = 0; i < PIDTYPE_MAX; i++) {
- pid_hash[i] = alloc_bootmem(pidhash_size *
- sizeof(*(pid_hash[i])));
- if (!pid_hash[i])
- panic("Could not alloc pidhash!\n");
- for (j = 0; j < pidhash_size; j++)
- INIT_HLIST_HEAD(&pid_hash[i][j]);
- }
+ pid_hash = alloc_bootmem(pidhash_size * sizeof(*(pid_hash)));
+ if (!pid_hash)
+ panic("Could not alloc pidhash!\n");
+ for (i = 0; i < pidhash_size; i++)
+ INIT_HLIST_HEAD(&pid_hash[i]);
}
void __init pidmap_init(void)
@@ -251,4 +327,8 @@
/* Reserve PID 0. We never call free_pidmap(0) */
set_bit(0, pidmap_array->page);
atomic_dec(&pidmap_array->nr_free);
+
+ pid_cachep = kmem_cache_create("pid", sizeof(struct pid),
+ __alignof__(struct pid),
+ SLAB_PANIC, NULL, NULL);
}
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 8ac7c35f..b2a5f67 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -26,8 +26,7 @@
(p->flags & PF_NOFREEZE) ||
(p->exit_state == EXIT_ZOMBIE) ||
(p->exit_state == EXIT_DEAD) ||
- (p->state == TASK_STOPPED) ||
- (p->state == TASK_TRACED))
+ (p->state == TASK_STOPPED))
return 0;
return 1;
}
diff --git a/kernel/sched.c b/kernel/sched.c
index a9ecac3..dd153d6 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -667,9 +667,13 @@
/*
* __activate_task - move a task to the runqueue.
*/
-static inline void __activate_task(task_t *p, runqueue_t *rq)
+static void __activate_task(task_t *p, runqueue_t *rq)
{
- enqueue_task(p, rq->active);
+ prio_array_t *target = rq->active;
+
+ if (batch_task(p))
+ target = rq->expired;
+ enqueue_task(p, target);
rq->nr_running++;
}
@@ -688,7 +692,7 @@
unsigned long long __sleep_time = now - p->timestamp;
unsigned long sleep_time;
- if (unlikely(p->policy == SCHED_BATCH))
+ if (batch_task(p))
sleep_time = 0;
else {
if (__sleep_time > NS_MAX_SLEEP_AVG)
@@ -700,21 +704,25 @@
if (likely(sleep_time > 0)) {
/*
* User tasks that sleep a long time are categorised as
- * idle and will get just interactive status to stay active &
- * prevent them suddenly becoming cpu hogs and starving
- * other processes.
+ * idle. They will only have their sleep_avg increased to a
+ * level that makes them just interactive priority to stay
+ * active yet prevent them suddenly becoming cpu hogs and
+ * starving other processes.
*/
- if (p->mm && p->activated != -1 &&
- sleep_time > INTERACTIVE_SLEEP(p)) {
- p->sleep_avg = JIFFIES_TO_NS(MAX_SLEEP_AVG -
- DEF_TIMESLICE);
+ if (p->mm && sleep_time > INTERACTIVE_SLEEP(p)) {
+ unsigned long ceiling;
+
+ ceiling = JIFFIES_TO_NS(MAX_SLEEP_AVG -
+ DEF_TIMESLICE);
+ if (p->sleep_avg < ceiling)
+ p->sleep_avg = ceiling;
} else {
/*
* Tasks waking from uninterruptible sleep are
* limited in their sleep_avg rise as they
* are likely to be waiting on I/O
*/
- if (p->activated == -1 && p->mm) {
+ if (p->sleep_type == SLEEP_NONINTERACTIVE && p->mm) {
if (p->sleep_avg >= INTERACTIVE_SLEEP(p))
sleep_time = 0;
else if (p->sleep_avg + sleep_time >=
@@ -769,7 +777,7 @@
* This checks to make sure it's not an uninterruptible task
* that is now waking up.
*/
- if (!p->activated) {
+ if (p->sleep_type == SLEEP_NORMAL) {
/*
* Tasks which were woken up by interrupts (ie. hw events)
* are most likely of interactive nature. So we give them
@@ -778,13 +786,13 @@
* on a CPU, first time around:
*/
if (in_interrupt())
- p->activated = 2;
+ p->sleep_type = SLEEP_INTERRUPTED;
else {
/*
* Normal first-time wakeups get a credit too for
* on-runqueue time, but it will be weighted down:
*/
- p->activated = 1;
+ p->sleep_type = SLEEP_INTERACTIVE;
}
}
p->timestamp = now;
@@ -1272,19 +1280,19 @@
* Tasks on involuntary sleep don't earn
* sleep_avg beyond just interactive state.
*/
- p->activated = -1;
- }
+ p->sleep_type = SLEEP_NONINTERACTIVE;
+ } else
/*
* Tasks that have marked their sleep as noninteractive get
- * woken up without updating their sleep average. (i.e. their
- * sleep is handled in a priority-neutral manner, no priority
- * boost and no penalty.)
+ * woken up with their sleep average not weighted in an
+ * interactive way.
*/
- if (old_state & TASK_NONINTERACTIVE)
- __activate_task(p, rq);
- else
- activate_task(p, rq, cpu == this_cpu);
+ if (old_state & TASK_NONINTERACTIVE)
+ p->sleep_type = SLEEP_NONINTERACTIVE;
+
+
+ activate_task(p, rq, cpu == this_cpu);
/*
* Sync wakeups (i.e. those types of wakeups where the waker
* has indicated that it will leave the CPU in short order)
@@ -1658,6 +1666,21 @@
return sum;
}
+unsigned long nr_active(void)
+{
+ unsigned long i, running = 0, uninterruptible = 0;
+
+ for_each_online_cpu(i) {
+ running += cpu_rq(i)->nr_running;
+ uninterruptible += cpu_rq(i)->nr_uninterruptible;
+ }
+
+ if (unlikely((long)uninterruptible < 0))
+ uninterruptible = 0;
+
+ return running + uninterruptible;
+}
+
#ifdef CONFIG_SMP
/*
@@ -2860,6 +2883,12 @@
#endif
+static inline int interactive_sleep(enum sleep_type sleep_type)
+{
+ return (sleep_type == SLEEP_INTERACTIVE ||
+ sleep_type == SLEEP_INTERRUPTED);
+}
+
/*
* schedule() is the main scheduler function.
*/
@@ -2983,12 +3012,12 @@
queue = array->queue + idx;
next = list_entry(queue->next, task_t, run_list);
- if (!rt_task(next) && next->activated > 0) {
+ if (!rt_task(next) && interactive_sleep(next->sleep_type)) {
unsigned long long delta = now - next->timestamp;
if (unlikely((long long)(now - next->timestamp) < 0))
delta = 0;
- if (next->activated == 1)
+ if (next->sleep_type == SLEEP_INTERACTIVE)
delta = delta * (ON_RUNQUEUE_WEIGHT * 128 / 100) / 128;
array = next->array;
@@ -2998,10 +3027,9 @@
dequeue_task(next, array);
next->prio = new_prio;
enqueue_task(next, array);
- } else
- requeue_task(next, array);
+ }
}
- next->activated = 0;
+ next->sleep_type = SLEEP_NORMAL;
switch_tasks:
if (next == rq->idle)
schedstat_inc(rq, sched_goidle);
diff --git a/kernel/signal.c b/kernel/signal.c
index 4922928..92025b1 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1560,6 +1560,7 @@
/* Let the debugger run. */
set_current_state(TASK_TRACED);
spin_unlock_irq(¤t->sighand->siglock);
+ try_to_freeze();
read_lock(&tasklist_lock);
if (likely(current->ptrace & PT_PTRACED) &&
likely(current->parent != current->real_parent ||
diff --git a/kernel/sys.c b/kernel/sys.c
index 7ef7f60..0b6ec0e 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1372,18 +1372,29 @@
asmlinkage long sys_setsid(void)
{
struct task_struct *group_leader = current->group_leader;
- struct pid *pid;
+ pid_t session;
int err = -EPERM;
mutex_lock(&tty_mutex);
write_lock_irq(&tasklist_lock);
- pid = find_pid(PIDTYPE_PGID, group_leader->pid);
- if (pid)
+ /* Fail if I am already a session leader */
+ if (group_leader->signal->leader)
+ goto out;
+
+ session = group_leader->pid;
+ /* Fail if a process group id already exists that equals the
+ * proposed session id.
+ *
+ * Don't check if session id == 1 because kernel threads use this
+ * session id and so the check will always fail and make it so
+ * init cannot successfully call setsid.
+ */
+ if (session > 1 && find_task_by_pid_type(PIDTYPE_PGID, session))
goto out;
group_leader->signal->leader = 1;
- __set_special_pids(group_leader->pid, group_leader->pid);
+ __set_special_pids(session, session);
group_leader->signal->tty = NULL;
group_leader->signal->tty_old_pgrp = 0;
err = process_group(group_leader);
diff --git a/kernel/timer.c b/kernel/timer.c
index ab189dd..6b812c0 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -54,7 +54,6 @@
/*
* per-CPU timer vector definitions:
*/
-
#define TVN_BITS (CONFIG_BASE_SMALL ? 4 : 6)
#define TVR_BITS (CONFIG_BASE_SMALL ? 6 : 8)
#define TVN_SIZE (1 << TVN_BITS)
@@ -62,11 +61,6 @@
#define TVN_MASK (TVN_SIZE - 1)
#define TVR_MASK (TVR_SIZE - 1)
-struct timer_base_s {
- spinlock_t lock;
- struct timer_list *running_timer;
-};
-
typedef struct tvec_s {
struct list_head vec[TVN_SIZE];
} tvec_t;
@@ -76,7 +70,8 @@
} tvec_root_t;
struct tvec_t_base_s {
- struct timer_base_s t_base;
+ spinlock_t lock;
+ struct timer_list *running_timer;
unsigned long timer_jiffies;
tvec_root_t tv1;
tvec_t tv2;
@@ -87,13 +82,14 @@
typedef struct tvec_t_base_s tvec_base_t;
static DEFINE_PER_CPU(tvec_base_t *, tvec_bases);
-static tvec_base_t boot_tvec_bases;
+tvec_base_t boot_tvec_bases;
+EXPORT_SYMBOL(boot_tvec_bases);
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
{
#ifdef CONFIG_SMP
- base->t_base.running_timer = timer;
+ base->running_timer = timer;
#endif
}
@@ -139,15 +135,6 @@
list_add_tail(&timer->entry, vec);
}
-typedef struct timer_base_s timer_base_t;
-/*
- * Used by TIMER_INITIALIZER, we can't use per_cpu(tvec_bases)
- * at compile time, and we need timer->base to lock the timer.
- */
-timer_base_t __init_timer_base
- ____cacheline_aligned_in_smp = { .lock = SPIN_LOCK_UNLOCKED };
-EXPORT_SYMBOL(__init_timer_base);
-
/***
* init_timer - initialize a timer.
* @timer: the timer to be initialized
@@ -158,7 +145,7 @@
void fastcall init_timer(struct timer_list *timer)
{
timer->entry.next = NULL;
- timer->base = &per_cpu(tvec_bases, raw_smp_processor_id())->t_base;
+ timer->base = per_cpu(tvec_bases, raw_smp_processor_id());
}
EXPORT_SYMBOL(init_timer);
@@ -174,7 +161,7 @@
}
/*
- * We are using hashed locking: holding per_cpu(tvec_bases).t_base.lock
+ * We are using hashed locking: holding per_cpu(tvec_bases).lock
* means that all timers which are tied to this base via timer->base are
* locked, and the base itself is locked too.
*
@@ -185,10 +172,10 @@
* possible to set timer->base = NULL and drop the lock: the timer remains
* locked.
*/
-static timer_base_t *lock_timer_base(struct timer_list *timer,
+static tvec_base_t *lock_timer_base(struct timer_list *timer,
unsigned long *flags)
{
- timer_base_t *base;
+ tvec_base_t *base;
for (;;) {
base = timer->base;
@@ -205,8 +192,7 @@
int __mod_timer(struct timer_list *timer, unsigned long expires)
{
- timer_base_t *base;
- tvec_base_t *new_base;
+ tvec_base_t *base, *new_base;
unsigned long flags;
int ret = 0;
@@ -221,7 +207,7 @@
new_base = __get_cpu_var(tvec_bases);
- if (base != &new_base->t_base) {
+ if (base != new_base) {
/*
* We are trying to schedule the timer on the local CPU.
* However we can't change timer's base while it is running,
@@ -229,21 +215,19 @@
* handler yet has not finished. This also guarantees that
* the timer is serialized wrt itself.
*/
- if (unlikely(base->running_timer == timer)) {
- /* The timer remains on a former base */
- new_base = container_of(base, tvec_base_t, t_base);
- } else {
+ if (likely(base->running_timer != timer)) {
/* See the comment in lock_timer_base() */
timer->base = NULL;
spin_unlock(&base->lock);
- spin_lock(&new_base->t_base.lock);
- timer->base = &new_base->t_base;
+ base = new_base;
+ spin_lock(&base->lock);
+ timer->base = base;
}
}
timer->expires = expires;
- internal_add_timer(new_base, timer);
- spin_unlock_irqrestore(&new_base->t_base.lock, flags);
+ internal_add_timer(base, timer);
+ spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
@@ -263,10 +247,10 @@
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
- spin_lock_irqsave(&base->t_base.lock, flags);
- timer->base = &base->t_base;
+ spin_lock_irqsave(&base->lock, flags);
+ timer->base = base;
internal_add_timer(base, timer);
- spin_unlock_irqrestore(&base->t_base.lock, flags);
+ spin_unlock_irqrestore(&base->lock, flags);
}
@@ -319,7 +303,7 @@
*/
int del_timer(struct timer_list *timer)
{
- timer_base_t *base;
+ tvec_base_t *base;
unsigned long flags;
int ret = 0;
@@ -346,7 +330,7 @@
*/
int try_to_del_timer_sync(struct timer_list *timer)
{
- timer_base_t *base;
+ tvec_base_t *base;
unsigned long flags;
int ret = -1;
@@ -410,7 +394,7 @@
struct timer_list *tmp;
tmp = list_entry(curr, struct timer_list, entry);
- BUG_ON(tmp->base != &base->t_base);
+ BUG_ON(tmp->base != base);
curr = curr->next;
internal_add_timer(base, tmp);
}
@@ -432,7 +416,7 @@
{
struct timer_list *timer;
- spin_lock_irq(&base->t_base.lock);
+ spin_lock_irq(&base->lock);
while (time_after_eq(jiffies, base->timer_jiffies)) {
struct list_head work_list = LIST_HEAD_INIT(work_list);
struct list_head *head = &work_list;
@@ -458,7 +442,7 @@
set_running_timer(base, timer);
detach_timer(timer, 1);
- spin_unlock_irq(&base->t_base.lock);
+ spin_unlock_irq(&base->lock);
{
int preempt_count = preempt_count();
fn(data);
@@ -471,11 +455,11 @@
BUG();
}
}
- spin_lock_irq(&base->t_base.lock);
+ spin_lock_irq(&base->lock);
}
}
set_running_timer(base, NULL);
- spin_unlock_irq(&base->t_base.lock);
+ spin_unlock_irq(&base->lock);
}
#ifdef CONFIG_NO_IDLE_HZ
@@ -506,7 +490,7 @@
hr_expires += jiffies;
base = __get_cpu_var(tvec_bases);
- spin_lock(&base->t_base.lock);
+ spin_lock(&base->lock);
expires = base->timer_jiffies + (LONG_MAX >> 1);
list = NULL;
@@ -554,7 +538,7 @@
expires = nte->expires;
}
}
- spin_unlock(&base->t_base.lock);
+ spin_unlock(&base->lock);
if (time_before(hr_expires, expires))
return hr_expires;
@@ -841,7 +825,7 @@
*/
static unsigned long count_active_tasks(void)
{
- return (nr_running() + nr_uninterruptible()) * FIXED_1;
+ return nr_active() * FIXED_1;
}
/*
@@ -1262,7 +1246,7 @@
}
per_cpu(tvec_bases, cpu) = base;
}
- spin_lock_init(&base->t_base.lock);
+ spin_lock_init(&base->lock);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
INIT_LIST_HEAD(base->tv4.vec + j);
@@ -1284,7 +1268,7 @@
while (!list_empty(head)) {
timer = list_entry(head->next, struct timer_list, entry);
detach_timer(timer, 0);
- timer->base = &new_base->t_base;
+ timer->base = new_base;
internal_add_timer(new_base, timer);
}
}
@@ -1300,11 +1284,11 @@
new_base = get_cpu_var(tvec_bases);
local_irq_disable();
- spin_lock(&new_base->t_base.lock);
- spin_lock(&old_base->t_base.lock);
+ spin_lock(&new_base->lock);
+ spin_lock(&old_base->lock);
- if (old_base->t_base.running_timer)
- BUG();
+ BUG_ON(old_base->running_timer);
+
for (i = 0; i < TVR_SIZE; i++)
migrate_timer_list(new_base, old_base->tv1.vec + i);
for (i = 0; i < TVN_SIZE; i++) {
@@ -1314,8 +1298,8 @@
migrate_timer_list(new_base, old_base->tv5.vec + i);
}
- spin_unlock(&old_base->t_base.lock);
- spin_unlock(&new_base->t_base.lock);
+ spin_unlock(&old_base->lock);
+ spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(tvec_bases);
}
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 907c392..0a03357 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -35,17 +35,6 @@
*
* LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk.
*
- * LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently
- * dirty pages at the disk.
- *
- * LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push
- * all of the currently dirty pages at the disk, wait until they have been
- * written.
- *
- * It should be noted that none of these operations write out the file's
- * metadata. So unless the application is strictly performing overwrites of
- * already-instantiated disk blocks, there are no guarantees here that the data
- * will be available after a crash.
*/
asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
{
@@ -129,15 +118,6 @@
invalidate_mapping_pages(mapping, start_index,
end_index);
break;
- case LINUX_FADV_ASYNC_WRITE:
- ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
- WB_SYNC_NONE);
- break;
- case LINUX_FADV_WRITE_WAIT:
- ret = wait_on_page_writeback_range(mapping,
- offset >> PAGE_CACHE_SHIFT,
- endbyte >> PAGE_CACHE_SHIFT);
- break;
default:
ret = -EINVAL;
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ebad6bb..832f676 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -334,6 +334,7 @@
return nr_huge_pages;
spin_lock(&hugetlb_lock);
+ count = max(count, reserved_huge_pages);
try_to_free_low(count);
while (count < nr_huge_pages) {
struct page *page = dequeue_huge_page(NULL, 0);
@@ -697,9 +698,10 @@
pfn_offset = (vaddr & ~HPAGE_MASK) >> PAGE_SHIFT;
page = pte_page(*pte);
same_page:
- get_page(page);
- if (pages)
+ if (pages) {
+ get_page(page);
pages[i] = page + pfn_offset;
+ }
if (vmas)
vmas[i] = vma;
diff --git a/mm/memory.c b/mm/memory.c
index 8d8f525..0ec7bc6 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -87,7 +87,7 @@
static int __init disable_randmaps(char *s)
{
randomize_va_space = 0;
- return 0;
+ return 1;
}
__setup("norandmaps", disable_randmaps);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 39aa9d1..e5fd538 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -397,18 +397,24 @@
p = swap_info_get(entry);
if (p) {
- if (swap_entry_free(p, swp_offset(entry)) == 1)
- page = find_trylock_page(&swapper_space, entry.val);
+ if (swap_entry_free(p, swp_offset(entry)) == 1) {
+ page = find_get_page(&swapper_space, entry.val);
+ if (page && unlikely(TestSetPageLocked(page))) {
+ page_cache_release(page);
+ page = NULL;
+ }
+ }
spin_unlock(&swap_lock);
}
if (page) {
int one_user;
BUG_ON(PagePrivate(page));
- page_cache_get(page);
one_user = (page_count(page) == 2);
/* Only cache user (+us), or swap space full? Free it! */
- if (!PageWriteback(page) && (one_user || vm_swap_full())) {
+ /* Also recheck PageSwapCache after page is locked (above) */
+ if (PageSwapCache(page) && !PageWriteback(page) &&
+ (one_user || vm_swap_full())) {
delete_from_swap_cache(page);
SetPageDirty(page);
}
diff --git a/net/core/dev.c b/net/core/dev.c
index a3ab11f..434220d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1080,6 +1080,70 @@
rcu_read_unlock();
}
+
+void __netif_schedule(struct net_device *dev)
+{
+ if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) {
+ unsigned long flags;
+ struct softnet_data *sd;
+
+ local_irq_save(flags);
+ sd = &__get_cpu_var(softnet_data);
+ dev->next_sched = sd->output_queue;
+ sd->output_queue = dev;
+ raise_softirq_irqoff(NET_TX_SOFTIRQ);
+ local_irq_restore(flags);
+ }
+}
+EXPORT_SYMBOL(__netif_schedule);
+
+void __netif_rx_schedule(struct net_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ dev_hold(dev);
+ list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
+ if (dev->quota < 0)
+ dev->quota += dev->weight;
+ else
+ dev->quota = dev->weight;
+ __raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__netif_rx_schedule);
+
+void dev_kfree_skb_any(struct sk_buff *skb)
+{
+ if (in_irq() || irqs_disabled())
+ dev_kfree_skb_irq(skb);
+ else
+ dev_kfree_skb(skb);
+}
+EXPORT_SYMBOL(dev_kfree_skb_any);
+
+
+/* Hot-plugging. */
+void netif_device_detach(struct net_device *dev)
+{
+ if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
+ netif_running(dev)) {
+ netif_stop_queue(dev);
+ }
+}
+EXPORT_SYMBOL(netif_device_detach);
+
+void netif_device_attach(struct net_device *dev)
+{
+ if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
+ netif_running(dev)) {
+ netif_wake_queue(dev);
+ __netdev_watchdog_up(dev);
+ }
+}
+EXPORT_SYMBOL(netif_device_attach);
+
+
/*
* Invalidate hardware checksum when packet is to be mangled, and
* complete checksum manually on outgoing path.
diff --git a/net/core/sock.c b/net/core/sock.c
index a96ea7d..ed2afdb 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -385,7 +385,21 @@
val = sysctl_rmem_max;
set_rcvbuf:
sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
- /* FIXME: is this lower bound the right one? */
+ /*
+ * We double it on the way in to account for
+ * "struct sk_buff" etc. overhead. Applications
+ * assume that the SO_RCVBUF setting they make will
+ * allow that much actual data to be received on that
+ * socket.
+ *
+ * Applications are unaware that "struct sk_buff" and
+ * other overheads allocate from the receive buffer
+ * during socket buffer allocation.
+ *
+ * And after considering the possible alternatives,
+ * returning the value we actually used in getsockopt
+ * is the most desirable behavior.
+ */
if ((val * 2) < SOCK_MIN_RCVBUF)
sk->sk_rcvbuf = SOCK_MIN_RCVBUF;
else
diff --git a/net/dccp/feat.c b/net/dccp/feat.c
index e3dd30d..b39e2a5 100644
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -204,7 +204,7 @@
if (rc) {
kfree(opt->dccpop_sc->dccpoc_val);
kfree(opt->dccpop_sc);
- opt->dccpop_sc = 0;
+ opt->dccpop_sc = NULL;
return rc;
}
@@ -322,7 +322,7 @@
opt->dccpop_type = type == DCCPO_CHANGE_L ? DCCPO_CONFIRM_R :
DCCPO_CONFIRM_L;
opt->dccpop_feat = feature;
- opt->dccpop_val = 0;
+ opt->dccpop_val = NULL;
opt->dccpop_len = 0;
/* change feature */
@@ -523,7 +523,7 @@
* once...
*/
/* the master socket no longer needs to worry about confirms */
- opt->dccpop_sc = 0; /* it's not a memleak---new socket has it */
+ opt->dccpop_sc = NULL; /* it's not a memleak---new socket has it */
/* reset state for a new socket */
opt->dccpop_conf = 0;
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index d2ae989..a26ff9f 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -620,7 +620,7 @@
}
write_unlock(&dndev_lock);
if (old)
- dev_put(dev);
+ dev_put(old);
return rv;
}