| /* |
| * cs.c -- Kernel Card Services - core services |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| * (C) 1999 David A. Hinds |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <linux/kthread.h> |
| #include <asm/system.h> |
| #include <asm/irq.h> |
| |
| #define IN_CARD_SERVICES |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/bulkmem.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| #include "cs_internal.h" |
| |
| |
| /* Module parameters */ |
| |
| MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); |
| MODULE_DESCRIPTION("Linux Kernel Card Services"); |
| MODULE_LICENSE("GPL"); |
| |
| #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) |
| |
| INT_MODULE_PARM(setup_delay, 10); /* centiseconds */ |
| INT_MODULE_PARM(resume_delay, 20); /* centiseconds */ |
| INT_MODULE_PARM(shutdown_delay, 3); /* centiseconds */ |
| INT_MODULE_PARM(vcc_settle, 40); /* centiseconds */ |
| INT_MODULE_PARM(reset_time, 10); /* usecs */ |
| INT_MODULE_PARM(unreset_delay, 10); /* centiseconds */ |
| INT_MODULE_PARM(unreset_check, 10); /* centiseconds */ |
| INT_MODULE_PARM(unreset_limit, 30); /* unreset_check's */ |
| |
| /* Access speed for attribute memory windows */ |
| INT_MODULE_PARM(cis_speed, 300); /* ns */ |
| |
| #ifdef DEBUG |
| static int pc_debug; |
| |
| module_param(pc_debug, int, 0644); |
| |
| int cs_debug_level(int level) |
| { |
| return pc_debug > level; |
| } |
| #endif |
| |
| |
| socket_state_t dead_socket = { |
| .csc_mask = SS_DETECT, |
| }; |
| EXPORT_SYMBOL(dead_socket); |
| |
| |
| /* List of all sockets, protected by a rwsem */ |
| LIST_HEAD(pcmcia_socket_list); |
| EXPORT_SYMBOL(pcmcia_socket_list); |
| |
| DECLARE_RWSEM(pcmcia_socket_list_rwsem); |
| EXPORT_SYMBOL(pcmcia_socket_list_rwsem); |
| |
| |
| /** |
| * Low-level PCMCIA socket drivers need to register with the PCCard |
| * core using pcmcia_register_socket. |
| * |
| * socket drivers are expected to use the following callbacks in their |
| * .drv struct: |
| * - pcmcia_socket_dev_suspend |
| * - pcmcia_socket_dev_resume |
| * These functions check for the appropriate struct pcmcia_soket arrays, |
| * and pass them to the low-level functions pcmcia_{suspend,resume}_socket |
| */ |
| static int socket_resume(struct pcmcia_socket *skt); |
| static int socket_suspend(struct pcmcia_socket *skt); |
| |
| int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state) |
| { |
| struct pcmcia_socket *socket; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { |
| if (socket->dev.dev != dev) |
| continue; |
| mutex_lock(&socket->skt_mutex); |
| socket_suspend(socket); |
| mutex_unlock(&socket->skt_mutex); |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcmcia_socket_dev_suspend); |
| |
| int pcmcia_socket_dev_resume(struct device *dev) |
| { |
| struct pcmcia_socket *socket; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { |
| if (socket->dev.dev != dev) |
| continue; |
| mutex_lock(&socket->skt_mutex); |
| socket_resume(socket); |
| mutex_unlock(&socket->skt_mutex); |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pcmcia_socket_dev_resume); |
| |
| |
| struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt) |
| { |
| struct class_device *cl_dev = class_device_get(&skt->dev); |
| if (!cl_dev) |
| return NULL; |
| skt = class_get_devdata(cl_dev); |
| if (!try_module_get(skt->owner)) { |
| class_device_put(&skt->dev); |
| return NULL; |
| } |
| return (skt); |
| } |
| EXPORT_SYMBOL(pcmcia_get_socket); |
| |
| |
| void pcmcia_put_socket(struct pcmcia_socket *skt) |
| { |
| module_put(skt->owner); |
| class_device_put(&skt->dev); |
| } |
| EXPORT_SYMBOL(pcmcia_put_socket); |
| |
| |
| static void pcmcia_release_socket(struct class_device *class_dev) |
| { |
| struct pcmcia_socket *socket = class_get_devdata(class_dev); |
| |
| complete(&socket->socket_released); |
| } |
| |
| static int pccardd(void *__skt); |
| |
| /** |
| * pcmcia_register_socket - add a new pcmcia socket device |
| */ |
| int pcmcia_register_socket(struct pcmcia_socket *socket) |
| { |
| struct task_struct *tsk; |
| int ret; |
| |
| if (!socket || !socket->ops || !socket->dev.dev || !socket->resource_ops) |
| return -EINVAL; |
| |
| cs_dbg(socket, 0, "pcmcia_register_socket(0x%p)\n", socket->ops); |
| |
| spin_lock_init(&socket->lock); |
| |
| if (socket->resource_ops->init) { |
| ret = socket->resource_ops->init(socket); |
| if (ret) |
| return (ret); |
| } |
| |
| /* try to obtain a socket number [yes, it gets ugly if we |
| * register more than 2^sizeof(unsigned int) pcmcia |
| * sockets... but the socket number is deprecated |
| * anyways, so I don't care] */ |
| down_write(&pcmcia_socket_list_rwsem); |
| if (list_empty(&pcmcia_socket_list)) |
| socket->sock = 0; |
| else { |
| unsigned int found, i = 1; |
| struct pcmcia_socket *tmp; |
| do { |
| found = 1; |
| list_for_each_entry(tmp, &pcmcia_socket_list, socket_list) { |
| if (tmp->sock == i) |
| found = 0; |
| } |
| i++; |
| } while (!found); |
| socket->sock = i - 1; |
| } |
| list_add_tail(&socket->socket_list, &pcmcia_socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| |
| #ifndef CONFIG_CARDBUS |
| /* |
| * If we do not support Cardbus, ensure that |
| * the Cardbus socket capability is disabled. |
| */ |
| socket->features &= ~SS_CAP_CARDBUS; |
| #endif |
| |
| /* set proper values in socket->dev */ |
| socket->dev.class_data = socket; |
| socket->dev.class = &pcmcia_socket_class; |
| snprintf(socket->dev.class_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); |
| |
| /* base address = 0, map = 0 */ |
| socket->cis_mem.flags = 0; |
| socket->cis_mem.speed = cis_speed; |
| |
| INIT_LIST_HEAD(&socket->cis_cache); |
| |
| init_completion(&socket->socket_released); |
| init_completion(&socket->thread_done); |
| init_waitqueue_head(&socket->thread_wait); |
| mutex_init(&socket->skt_mutex); |
| spin_lock_init(&socket->thread_lock); |
| |
| tsk = kthread_run(pccardd, socket, "pccardd"); |
| if (IS_ERR(tsk)) { |
| ret = PTR_ERR(tsk); |
| goto err; |
| } |
| |
| wait_for_completion(&socket->thread_done); |
| if (!socket->thread) { |
| printk(KERN_WARNING "PCMCIA: warning: socket thread for socket %p did not start\n", socket); |
| return -EIO; |
| } |
| |
| pcmcia_parse_events(socket, SS_DETECT); |
| |
| return 0; |
| |
| err: |
| down_write(&pcmcia_socket_list_rwsem); |
| list_del(&socket->socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| return ret; |
| } /* pcmcia_register_socket */ |
| EXPORT_SYMBOL(pcmcia_register_socket); |
| |
| |
| /** |
| * pcmcia_unregister_socket - remove a pcmcia socket device |
| */ |
| void pcmcia_unregister_socket(struct pcmcia_socket *socket) |
| { |
| if (!socket) |
| return; |
| |
| cs_dbg(socket, 0, "pcmcia_unregister_socket(0x%p)\n", socket->ops); |
| |
| if (socket->thread) { |
| wake_up(&socket->thread_wait); |
| kthread_stop(socket->thread); |
| } |
| release_cis_mem(socket); |
| |
| /* remove from our own list */ |
| down_write(&pcmcia_socket_list_rwsem); |
| list_del(&socket->socket_list); |
| up_write(&pcmcia_socket_list_rwsem); |
| |
| /* wait for sysfs to drop all references */ |
| release_resource_db(socket); |
| wait_for_completion(&socket->socket_released); |
| } /* pcmcia_unregister_socket */ |
| EXPORT_SYMBOL(pcmcia_unregister_socket); |
| |
| |
| struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr) |
| { |
| struct pcmcia_socket *s; |
| |
| down_read(&pcmcia_socket_list_rwsem); |
| list_for_each_entry(s, &pcmcia_socket_list, socket_list) |
| if (s->sock == nr) { |
| up_read(&pcmcia_socket_list_rwsem); |
| return s; |
| } |
| up_read(&pcmcia_socket_list_rwsem); |
| |
| return NULL; |
| |
| } |
| EXPORT_SYMBOL(pcmcia_get_socket_by_nr); |
| |
| /** |
| * The central event handler. Send_event() sends an event to the |
| * 16-bit subsystem, which then calls the relevant device drivers. |
| * Parse_events() interprets the event bits from |
| * a card status change report. Do_shutdown() handles the high |
| * priority stuff associated with a card removal. |
| */ |
| |
| /* NOTE: send_event needs to be called with skt->sem held. */ |
| |
| static int send_event(struct pcmcia_socket *s, event_t event, int priority) |
| { |
| int ret; |
| |
| if (s->state & SOCKET_CARDBUS) |
| return 0; |
| |
| cs_dbg(s, 1, "send_event(event %d, pri %d, callback 0x%p)\n", |
| event, priority, s->callback); |
| |
| if (!s->callback) |
| return 0; |
| if (!try_module_get(s->callback->owner)) |
| return 0; |
| |
| ret = s->callback->event(s, event, priority); |
| |
| module_put(s->callback->owner); |
| |
| return ret; |
| } |
| |
| static void socket_remove_drivers(struct pcmcia_socket *skt) |
| { |
| cs_dbg(skt, 4, "remove_drivers\n"); |
| |
| send_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); |
| } |
| |
| static int socket_reset(struct pcmcia_socket *skt) |
| { |
| int status, i; |
| |
| cs_dbg(skt, 4, "reset\n"); |
| |
| skt->socket.flags |= SS_OUTPUT_ENA | SS_RESET; |
| skt->ops->set_socket(skt, &skt->socket); |
| udelay((long)reset_time); |
| |
| skt->socket.flags &= ~SS_RESET; |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| msleep(unreset_delay * 10); |
| for (i = 0; i < unreset_limit; i++) { |
| skt->ops->get_status(skt, &status); |
| |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| if (status & SS_READY) |
| return CS_SUCCESS; |
| |
| msleep(unreset_check * 10); |
| } |
| |
| cs_err(skt, "time out after reset.\n"); |
| return CS_GENERAL_FAILURE; |
| } |
| |
| /** |
| * socket_setup() and socket_shutdown() are called by the main event handler |
| * when card insertion and removal events are received. |
| * socket_setup() turns on socket power and resets the socket, in two stages. |
| * socket_shutdown() unconfigures a socket and turns off socket power. |
| */ |
| static void socket_shutdown(struct pcmcia_socket *s) |
| { |
| int status; |
| |
| cs_dbg(s, 4, "shutdown\n"); |
| |
| socket_remove_drivers(s); |
| s->state &= SOCKET_INUSE | SOCKET_PRESENT; |
| msleep(shutdown_delay * 10); |
| s->state &= SOCKET_INUSE; |
| |
| /* Blank out the socket state */ |
| s->socket = dead_socket; |
| s->ops->init(s); |
| s->ops->set_socket(s, &s->socket); |
| s->irq.AssignedIRQ = s->irq.Config = 0; |
| s->lock_count = 0; |
| destroy_cis_cache(s); |
| #ifdef CONFIG_CARDBUS |
| cb_free(s); |
| #endif |
| s->functions = 0; |
| |
| s->ops->get_status(s, &status); |
| if (status & SS_POWERON) { |
| printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s); |
| } |
| |
| cs_socket_put(s); |
| } |
| |
| static int socket_setup(struct pcmcia_socket *skt, int initial_delay) |
| { |
| int status, i; |
| |
| cs_dbg(skt, 4, "setup\n"); |
| |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| msleep(initial_delay * 10); |
| |
| for (i = 0; i < 100; i++) { |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_DETECT)) |
| return CS_NO_CARD; |
| |
| if (!(status & SS_PENDING)) |
| break; |
| |
| msleep(100); |
| } |
| |
| if (status & SS_PENDING) { |
| cs_err(skt, "voltage interrogation timed out.\n"); |
| return CS_GENERAL_FAILURE; |
| } |
| |
| if (status & SS_CARDBUS) { |
| if (!(skt->features & SS_CAP_CARDBUS)) { |
| cs_err(skt, "cardbus cards are not supported.\n"); |
| return CS_BAD_TYPE; |
| } |
| skt->state |= SOCKET_CARDBUS; |
| } |
| |
| /* |
| * Decode the card voltage requirements, and apply power to the card. |
| */ |
| if (status & SS_3VCARD) |
| skt->socket.Vcc = skt->socket.Vpp = 33; |
| else if (!(status & SS_XVCARD)) |
| skt->socket.Vcc = skt->socket.Vpp = 50; |
| else { |
| cs_err(skt, "unsupported voltage key.\n"); |
| return CS_BAD_TYPE; |
| } |
| |
| if (skt->power_hook) |
| skt->power_hook(skt, HOOK_POWER_PRE); |
| |
| skt->socket.flags = 0; |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| /* |
| * Wait "vcc_settle" for the supply to stabilise. |
| */ |
| msleep(vcc_settle * 10); |
| |
| skt->ops->get_status(skt, &status); |
| if (!(status & SS_POWERON)) { |
| cs_err(skt, "unable to apply power.\n"); |
| return CS_BAD_TYPE; |
| } |
| |
| status = socket_reset(skt); |
| |
| if (skt->power_hook) |
| skt->power_hook(skt, HOOK_POWER_POST); |
| |
| return status; |
| } |
| |
| /* |
| * Handle card insertion. Setup the socket, reset the card, |
| * and then tell the rest of PCMCIA that a card is present. |
| */ |
| static int socket_insert(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 4, "insert\n"); |
| |
| if (!cs_socket_get(skt)) |
| return CS_NO_CARD; |
| |
| ret = socket_setup(skt, setup_delay); |
| if (ret == CS_SUCCESS) { |
| skt->state |= SOCKET_PRESENT; |
| |
| printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n", |
| (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA", |
| skt->sock); |
| |
| #ifdef CONFIG_CARDBUS |
| if (skt->state & SOCKET_CARDBUS) { |
| cb_alloc(skt); |
| skt->state |= SOCKET_CARDBUS_CONFIG; |
| } |
| #endif |
| cs_dbg(skt, 4, "insert done\n"); |
| |
| send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else { |
| socket_shutdown(skt); |
| } |
| |
| return ret; |
| } |
| |
| static int socket_suspend(struct pcmcia_socket *skt) |
| { |
| if (skt->state & SOCKET_SUSPEND) |
| return CS_IN_USE; |
| |
| send_event(skt, CS_EVENT_PM_SUSPEND, CS_EVENT_PRI_LOW); |
| skt->socket = dead_socket; |
| skt->ops->set_socket(skt, &skt->socket); |
| if (skt->ops->suspend) |
| skt->ops->suspend(skt); |
| skt->state |= SOCKET_SUSPEND; |
| |
| return CS_SUCCESS; |
| } |
| |
| /* |
| * Resume a socket. If a card is present, verify its CIS against |
| * our cached copy. If they are different, the card has been |
| * replaced, and we need to tell the drivers. |
| */ |
| static int socket_resume(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| if (!(skt->state & SOCKET_SUSPEND)) |
| return CS_IN_USE; |
| |
| skt->socket = dead_socket; |
| skt->ops->init(skt); |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| if (!(skt->state & SOCKET_PRESENT)) { |
| skt->state &= ~SOCKET_SUSPEND; |
| return socket_insert(skt); |
| } |
| |
| ret = socket_setup(skt, resume_delay); |
| if (ret == CS_SUCCESS) { |
| /* |
| * FIXME: need a better check here for cardbus cards. |
| */ |
| if (verify_cis_cache(skt) != 0) { |
| cs_dbg(skt, 4, "cis mismatch - different card\n"); |
| socket_remove_drivers(skt); |
| destroy_cis_cache(skt); |
| /* |
| * Workaround: give DS time to schedule removal. |
| * Remove me once the 100ms delay is eliminated |
| * in ds.c |
| */ |
| msleep(200); |
| send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else { |
| cs_dbg(skt, 4, "cis matches cache\n"); |
| send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); |
| } |
| } else { |
| socket_shutdown(skt); |
| } |
| |
| skt->state &= ~SOCKET_SUSPEND; |
| |
| return CS_SUCCESS; |
| } |
| |
| static void socket_remove(struct pcmcia_socket *skt) |
| { |
| printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock); |
| socket_shutdown(skt); |
| } |
| |
| /* |
| * Process a socket card detect status change. |
| * |
| * If we don't have a card already present, delay the detect event for |
| * about 20ms (to be on the safe side) before reading the socket status. |
| * |
| * Some i82365-based systems send multiple SS_DETECT events during card |
| * insertion, and the "card present" status bit seems to bounce. This |
| * will probably be true with GPIO-based card detection systems after |
| * the product has aged. |
| */ |
| static void socket_detect_change(struct pcmcia_socket *skt) |
| { |
| if (!(skt->state & SOCKET_SUSPEND)) { |
| int status; |
| |
| if (!(skt->state & SOCKET_PRESENT)) |
| msleep(20); |
| |
| skt->ops->get_status(skt, &status); |
| if ((skt->state & SOCKET_PRESENT) && |
| !(status & SS_DETECT)) |
| socket_remove(skt); |
| if (!(skt->state & SOCKET_PRESENT) && |
| (status & SS_DETECT)) |
| socket_insert(skt); |
| } |
| } |
| |
| static int pccardd(void *__skt) |
| { |
| struct pcmcia_socket *skt = __skt; |
| DECLARE_WAITQUEUE(wait, current); |
| int ret; |
| |
| skt->thread = current; |
| skt->socket = dead_socket; |
| skt->ops->init(skt); |
| skt->ops->set_socket(skt, &skt->socket); |
| |
| /* register with the device core */ |
| ret = class_device_register(&skt->dev); |
| if (ret) { |
| printk(KERN_WARNING "PCMCIA: unable to register socket 0x%p\n", |
| skt); |
| skt->thread = NULL; |
| complete(&skt->thread_done); |
| return 0; |
| } |
| |
| add_wait_queue(&skt->thread_wait, &wait); |
| complete(&skt->thread_done); |
| |
| for (;;) { |
| unsigned long flags; |
| unsigned int events; |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&skt->thread_lock, flags); |
| events = skt->thread_events; |
| skt->thread_events = 0; |
| spin_unlock_irqrestore(&skt->thread_lock, flags); |
| |
| if (events) { |
| mutex_lock(&skt->skt_mutex); |
| if (events & SS_DETECT) |
| socket_detect_change(skt); |
| if (events & SS_BATDEAD) |
| send_event(skt, CS_EVENT_BATTERY_DEAD, CS_EVENT_PRI_LOW); |
| if (events & SS_BATWARN) |
| send_event(skt, CS_EVENT_BATTERY_LOW, CS_EVENT_PRI_LOW); |
| if (events & SS_READY) |
| send_event(skt, CS_EVENT_READY_CHANGE, CS_EVENT_PRI_LOW); |
| mutex_unlock(&skt->skt_mutex); |
| continue; |
| } |
| |
| if (kthread_should_stop()) |
| break; |
| |
| schedule(); |
| try_to_freeze(); |
| } |
| /* make sure we are running before we exit */ |
| set_current_state(TASK_RUNNING); |
| |
| remove_wait_queue(&skt->thread_wait, &wait); |
| |
| /* remove from the device core */ |
| class_device_unregister(&skt->dev); |
| |
| return 0; |
| } |
| |
| /* |
| * Yenta (at least) probes interrupts before registering the socket and |
| * starting the handler thread. |
| */ |
| void pcmcia_parse_events(struct pcmcia_socket *s, u_int events) |
| { |
| unsigned long flags; |
| cs_dbg(s, 4, "parse_events: events %08x\n", events); |
| if (s->thread) { |
| spin_lock_irqsave(&s->thread_lock, flags); |
| s->thread_events |= events; |
| spin_unlock_irqrestore(&s->thread_lock, flags); |
| |
| wake_up(&s->thread_wait); |
| } |
| } /* pcmcia_parse_events */ |
| EXPORT_SYMBOL(pcmcia_parse_events); |
| |
| |
| /* register pcmcia_callback */ |
| int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c) |
| { |
| int ret = 0; |
| |
| /* s->skt_mutex also protects s->callback */ |
| mutex_lock(&s->skt_mutex); |
| |
| if (c) { |
| /* registration */ |
| if (s->callback) { |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| s->callback = c; |
| |
| if ((s->state & (SOCKET_PRESENT|SOCKET_CARDBUS)) == SOCKET_PRESENT) |
| send_event(s, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW); |
| } else |
| s->callback = NULL; |
| err: |
| mutex_unlock(&s->skt_mutex); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pccard_register_pcmcia); |
| |
| |
| /* I'm not sure which "reset" function this is supposed to use, |
| * but for now, it uses the low-level interface's reset, not the |
| * CIS register. |
| */ |
| |
| int pccard_reset_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "resetting socket\n"); |
| |
| mutex_lock(&skt->skt_mutex); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_SUSPEND) { |
| ret = CS_IN_USE; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| |
| ret = send_event(skt, CS_EVENT_RESET_REQUEST, CS_EVENT_PRI_LOW); |
| if (ret == 0) { |
| send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW); |
| if (skt->callback) |
| skt->callback->suspend(skt); |
| if (socket_reset(skt) == CS_SUCCESS) { |
| send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW); |
| if (skt->callback) |
| skt->callback->resume(skt); |
| } |
| } |
| |
| ret = CS_SUCCESS; |
| } while (0); |
| mutex_unlock(&skt->skt_mutex); |
| |
| return ret; |
| } /* reset_card */ |
| EXPORT_SYMBOL(pccard_reset_card); |
| |
| |
| /* These shut down or wake up a socket. They are sort of user |
| * initiated versions of the APM suspend and resume actions. |
| */ |
| int pcmcia_suspend_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "suspending socket\n"); |
| |
| mutex_lock(&skt->skt_mutex); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| if (skt->callback) { |
| ret = skt->callback->suspend(skt); |
| if (ret) |
| break; |
| } |
| ret = socket_suspend(skt); |
| } while (0); |
| mutex_unlock(&skt->skt_mutex); |
| |
| return ret; |
| } /* suspend_card */ |
| EXPORT_SYMBOL(pcmcia_suspend_card); |
| |
| |
| int pcmcia_resume_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "waking up socket\n"); |
| |
| mutex_lock(&skt->skt_mutex); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = CS_NO_CARD; |
| break; |
| } |
| if (skt->state & SOCKET_CARDBUS) { |
| ret = CS_UNSUPPORTED_FUNCTION; |
| break; |
| } |
| ret = socket_resume(skt); |
| if (!ret && skt->callback) |
| skt->callback->resume(skt); |
| } while (0); |
| mutex_unlock(&skt->skt_mutex); |
| |
| return ret; |
| } /* resume_card */ |
| EXPORT_SYMBOL(pcmcia_resume_card); |
| |
| |
| /* These handle user requests to eject or insert a card. */ |
| int pcmcia_eject_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "user eject request\n"); |
| |
| mutex_lock(&skt->skt_mutex); |
| do { |
| if (!(skt->state & SOCKET_PRESENT)) { |
| ret = -ENODEV; |
| break; |
| } |
| |
| ret = send_event(skt, CS_EVENT_EJECTION_REQUEST, CS_EVENT_PRI_LOW); |
| if (ret != 0) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| socket_remove(skt); |
| ret = 0; |
| } while (0); |
| mutex_unlock(&skt->skt_mutex); |
| |
| return ret; |
| } /* eject_card */ |
| EXPORT_SYMBOL(pcmcia_eject_card); |
| |
| |
| int pcmcia_insert_card(struct pcmcia_socket *skt) |
| { |
| int ret; |
| |
| cs_dbg(skt, 1, "user insert request\n"); |
| |
| mutex_lock(&skt->skt_mutex); |
| do { |
| if (skt->state & SOCKET_PRESENT) { |
| ret = -EBUSY; |
| break; |
| } |
| if (socket_insert(skt) == CS_NO_CARD) { |
| ret = -ENODEV; |
| break; |
| } |
| ret = 0; |
| } while (0); |
| mutex_unlock(&skt->skt_mutex); |
| |
| return ret; |
| } /* insert_card */ |
| EXPORT_SYMBOL(pcmcia_insert_card); |
| |
| |
| static int pcmcia_socket_uevent(struct class_device *dev, char **envp, |
| int num_envp, char *buffer, int buffer_size) |
| { |
| struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev); |
| int i = 0, length = 0; |
| |
| if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, |
| &length, "SOCKET_NO=%u", s->sock)) |
| return -ENOMEM; |
| |
| envp[i] = NULL; |
| |
| return 0; |
| } |
| |
| |
| static struct completion pcmcia_unload; |
| |
| static void pcmcia_release_socket_class(struct class *data) |
| { |
| complete(&pcmcia_unload); |
| } |
| |
| |
| struct class pcmcia_socket_class = { |
| .name = "pcmcia_socket", |
| .uevent = pcmcia_socket_uevent, |
| .release = pcmcia_release_socket, |
| .class_release = pcmcia_release_socket_class, |
| }; |
| EXPORT_SYMBOL(pcmcia_socket_class); |
| |
| |
| static int __init init_pcmcia_cs(void) |
| { |
| int ret; |
| |
| init_completion(&pcmcia_unload); |
| ret = class_register(&pcmcia_socket_class); |
| if (ret) |
| return (ret); |
| return class_interface_register(&pccard_sysfs_interface); |
| } |
| |
| static void __exit exit_pcmcia_cs(void) |
| { |
| class_interface_unregister(&pccard_sysfs_interface); |
| class_unregister(&pcmcia_socket_class); |
| |
| wait_for_completion(&pcmcia_unload); |
| } |
| |
| subsys_initcall(init_pcmcia_cs); |
| module_exit(exit_pcmcia_cs); |
| |