Merge branch 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: TI bq24022 Li-Ion Charger driver
regulator: maintainers - add maintainers for regulator framework.
regulator: documentation - ABI
regulator: documentation - machine
regulator: documentation - regulator driver
regulator: documentation - consumer interface
regulator: documentation - overview
regulator: core kbuild files
regulator: regulator test harness
regulator: add support for fixed regulators.
regulator: regulator framework core
regulator: fixed regulator interface
regulator: machine driver interface
regulator: regulator driver interface
regulator: consumer device interface
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5..c6cd495 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@
charge when battery considered full/empty at given conditions (temperature,
age)". I.e. these attributes represents real thresholds, not design values.
+CHARGE_COUNTER - the current charge counter (in µAh). This could easily
+be negative; there is no empty or full value. It is only useful for
+relative, time-based measurements.
+
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa..29d839c 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@
- MPC5200 Device Tree Bindings
ppc_htab.txt
- info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
- - EST SBC8260 board info
smp.txt
- use and state info about Linux/PPC on MP machines
sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0..0000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
- * EST SBC8260 Linux memory mapping rules
-
- http://www.estc.com/
- http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
- Initial conditions:
- -------------------
-
- Tasks that need to be perform by the boot ROM before control is
- transferred to zImage (compressed Linux kernel):
-
- - Define the IMMR to 0xf0000000
-
- - Initialize the memory controller so that RAM is available at
- physical address 0x00000000. On the SBC8260 is this 16M (64M)
- SDRAM.
-
- - The boot ROM should only clear the RAM that it is using.
-
- The reason for doing this is to enhances the chances of a
- successful post mortem on a Linux panic. One of the first
- items to examine is the 16k (LOG_BUF_LEN) circular console
- buffer called log_buf which is defined in kernel/printk.c.
-
- - To enhance boot ROM performance, the I-cache can be enabled.
-
- Date: Mon, 22 May 2000 14:21:10 -0700
- From: Neil Russell <caret@c-side.com>
-
- LiMon (LInux MONitor) runs with and starts Linux with MMU
- off, I-cache enabled, D-cache disabled. The I-cache doesn't
- need hints from the MMU to work correctly as the D-cache
- does. No D-cache means no special code to handle devices in
- the presence of cache (no snooping, etc). The use of the
- I-cache means that the monitor can run acceptably fast
- directly from ROM, rather than having to copy it to RAM.
-
- - Build the board information structure (see
- include/asm-ppc/est8260.h for its definition)
-
- - The compressed Linux kernel (zImage) contains a bootstrap loader
- that is position independent; you can load it into any RAM,
- ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
- at its link address of 0x00400000 (4 MB).
-
- Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
- then zImage will skip the step of moving itself to
- its link address.
-
- - Load R3 with the address of the board information structure
-
- - Transfer control to zImage
-
- - The Linux console port is SMC1, and the baud rate is controlled
- from the bi_baudrate field of the board information structure.
- On thing to keep in mind when picking the baud rate, is that
- there is no flow control on the SMC ports. I would stick
- with something safe and standard like 19200.
-
- On the EST SBC8260, the SMC1 port is on the COM1 connector of
- the board.
-
-
- EST SBC8260 defaults:
- ---------------------
-
- Chip
- Memory Sel Bus Use
- --------------------- --- --- ----------------------------------
- 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM
- 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board)
- 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM)
- 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write)
- 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM
- 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board)
- 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM)
-
- Notes:
- ------
-
- - The chip selects can map 32K blocks and up (powers of 2)
-
- - The SDRAM machine can handled up to 128Mbytes per chip select
-
- - Linux uses the 60x bus memory (the SDRAM DIMM) for the
- communications buffers.
-
- - BATs can map 128K-256Mbytes each. There are four data BATs and
- four instruction BATs. Generally the data and instruction BATs
- are mapped the same.
-
- - The IMMR must be set above the kernel virtual memory addresses,
- which start at 0xC0000000. Otherwise, the kernel may crash as
- soon as you start any threads or processes due to VM collisions
- in the kernel or user process space.
-
-
- Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
- The user application virtual space consumes the first 2 Gbytes
- (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at
- 0xC0000000, with data following. There is a "protection hole"
- between the end of kernel data and the start of the kernel
- dynamically allocated space, but this space is still within
- 0xCxxxxxxx.
-
- Obviously the kernel can't map any physical addresses 1:1 in
- these ranges.
-
-
- Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
- During the early kernel initialization, the kernel virtual
- memory allocator is not operational. Prior to this KVM
- initialization, we choose to map virtual to physical addresses
- 1:1. That is, the kernel virtual address exactly matches the
- physical address on the bus. These mappings are typically done
- in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only
- absolutely necessary mappings should be done at this time, for
- example board control registers or a serial uart. Normal device
- driver initialization should map resources later when necessary.
-
- Although platform dependent, and certainly the case for embedded
- 8xx, traditionally memory is mapped at physical address zero,
- and I/O devices above physical address 0x80000000. The lowest
- and highest (above 0xf0000000) I/O addresses are traditionally
- used for devices or registers we need to map during kernel
- initialization and prior to KVM operation. For this reason,
- and since it followed prior PowerPC platform examples, I chose
- to map the embedded 8xx kernel to the 0xc0000000 virtual address.
- This way, we can enable the MMU to map the kernel for proper
- operation, and still map a few windows before the KVM is operational.
-
- On some systems, you could possibly run the kernel at the
- 0x80000000 or any other virtual address. It just depends upon
- mapping that must be done prior to KVM operational. You can never
- map devices or kernel spaces that overlap with the user virtual
- space. This is why default IMMR mapping used by most BDM tools
- won't work. They put the IMMR at something like 0x10000000 or
- 0x02000000 for example. You simply can't map these addresses early
- in the kernel, and continue proper system operation.
-
- The embedded 8xx/82xx kernel is mature enough that all you should
- need to do is map the IMMR someplace at or above 0xf0000000 and it
- should boot far enough to get serial console messages and KGDB
- connected on any platform. There are lots of other subtle memory
- management design features that you simply don't need to worry
- about. If you are changing functions related to MMU initialization,
- you are likely breaking things that are known to work and are
- heading down a path of disaster and frustration. Your changes
- should be to make the flexibility of the processor fit Linux,
- not force arbitrary and non-workable memory mappings into Linux.
-
- - You don't want to change KERNELLOAD or KERNELBASE, otherwise the
- virtual memory and MMU code will get confused.
-
- arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
- include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000
- include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET
-
- - RAM is at physical address 0x00000000, and gets mapped to
- virtual address 0xC0000000 for the kernel.
-
-
- Physical addresses used by the Linux kernel:
- --------------------------------------------
-
- 0x00000000-0x3FFFFFFF 1GB reserved for RAM
- 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory,
- 64K for 8260 registers
-
-
- Logical addresses used by the Linux kernel:
- -------------------------------------------
-
- 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers)
- 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards)
- 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM)
- 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte)
-
-
- EST SBC8260 Linux mapping:
- --------------------------
-
- DBAT0, IBAT0, cache inhibited:
-
- Chip
- Memory Sel Use
- --------------------- --- ---------------------------------
- 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers
-
- DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f348..2ea76d9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@
- fsl,cpm2-scc-uart
- fsl,qe-uart
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
Example:
serial@11a00 {
@@ -18,4 +27,6 @@
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
+ gpios = <&gpio_c 15 0
+ &gpio_d 29 0>;
};
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 0843ed0..28b6ec8 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -390,9 +390,10 @@
rfkill input line is active. Only if none of the rfkill input lines are
active, will it return RFKILL_STATE_UNBLOCKED.
-If it doesn't implement the get_state() hook, it must make sure that its calls
-to rfkill_force_state() are enough to keep the status always up-to-date, and it
-must do a rfkill_force_state() on resume from sleep.
+Since the device has a hardware rfkill line, it IS subject to state changes
+external to rfkill. Therefore, the driver must make sure that it calls
+rfkill_force_state() to keep the status always up-to-date, and it must do a
+rfkill_force_state() on resume from sleep.
Every time the driver gets a notification from the card that one of its rfkill
lines changed state (polling might be needed on badly designed cards that don't
@@ -422,13 +423,24 @@
about its current state).
The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware. This can happen often.
+to know the *real* current state of the hardware. This can happen often, but
+it does not do any polling, so it is not enough on hardware that is subject
+to state changes outside of the rfkill subsystem.
+
+Therefore, calling rfkill_force_state() when a state change happens is
+mandatory when the device has a hardware rfkill line, or when something else
+like the firmware could cause its state to be changed without going through the
+rfkill class.
Some hardware provides events when its status changes. In these cases, it is
best for the driver to not provide a get_state hook, and instead register the
rfkill class *already* with the correct status, and keep it updated using
rfkill_force_state() when it gets an event from the hardware.
+rfkill_force_state() must be used on the device resume handlers to update the
+rfkill status, should there be any chance of the device status changing during
+the sleep.
+
There is no provision for a statically-allocated rfkill struct. You must
use rfkill_allocate() to allocate one.
diff --git a/MAINTAINERS b/MAINTAINERS
index 42e7ed9..c65a5b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3968,7 +3968,7 @@
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S: Maintained
+S: Supported
SUN3/3X
P: Sam Creasey
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index c45fc7f..b0f6157 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/log2.h>
@@ -21,7 +22,8 @@
#include <asm/tlb.h>
#include <asm/tlbflush.h>
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
pte_t *
huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b4c4eaa..4da736e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@
default y
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
select RTC_LIB
@@ -34,7 +35,6 @@
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
help
The eXcite is a smart camera platform manufactured by
Basler Vision Technologies AG.
@@ -280,7 +280,6 @@
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
select IRQ_CPU
select SERIAL_8250
select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_SMP
help
Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
select ZONE_DMA32 if 64BIT
@@ -868,7 +864,6 @@
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select GENERIC_HARDIRQS_NO__DO_IRQ
- select SYS_SUPPORTS_KGDB
select GENERIC_GPIO
config SWAP_IO_SPACE
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92..765c8e2 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@
arch/mips/kernel/smtc.c. This debugging option result in significant
overhead so should be disabled in production kernels.
-config KGDB
- bool "Remote GDB kernel debugging"
- depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
- select DEBUG_INFO
- help
- If you say Y here, it will be possible to remotely debug the MIPS
- kernel using gdb. This enlarges your kernel image disk size by
- several megabytes and requires a machine with more than 16 MB,
- better 32 MB RAM to avoid excessive linking time. This is only
- useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
- bool
-
-config GDB_CONSOLE
- bool "Console output to GDB"
- depends on KGDB
- help
- If you are using GDB for remote debugging over a serial port and
- would like kernel messages to be formatted into GDB $O packets so
- that GDB prints them as program output, say 'Y'.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cc..e4a057d 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
- select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19d..df48fd6 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
sleeper.o cputable.o dma.o dbdma.o gpio.o
-obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7d..0000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE UART_DEBUG_BASE
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-
-#define UART_RX 0 /* Receive buffer */
-#define UART_TX 4 /* Transmit buffer */
-#define UART_IER 8 /* Interrupt Enable Register */
-#define UART_IIR 0xC /* Interrupt ID Register */
-#define UART_FCR 0x10 /* FIFO Control Register */
-#define UART_LCR 0x14 /* Line Control Register */
-#define UART_MCR 0x18 /* Modem Control Register */
-#define UART_LSR 0x1C /* Line Status Register */
-#define UART_MSR 0x20 /* Modem Status Register */
-#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL 0x100 /* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
- UART16550_WRITE(UART_MOD_CNTRL, 3);
- calc_clock();
-
- /* disable interrupts */
- UART16550_WRITE(UART_IER, 0);
-
- /* set up baud rate */
- {
- u32 divisor;
-
- /* set divisor */
- divisor = get_au1x00_uart_baud_base() / baud;
- UART16550_WRITE(UART_CLK, divisor & 0xffff);
- }
-
- /* set data format */
- UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE,
- UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(UART_LSR) & 0x1) == 0);
- return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE,
- UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(UART_LSR) & 0x40) == 0);
- UART16550_WRITE(UART_TX, byte);
-
- return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de..8474135 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aeb..3bae13c 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365..8a9c7d5 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483..7c67923 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b..e9b2a0f 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@
if (!memsize_str)
memsize = 0x08000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e1..3b6e395 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f584..e1055a1 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@
if (!memsize_str)
memsize = 0x08000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf5..7516434 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c..cff29cf 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
excite_device.o excite_procfs.o
-obj-$(CONFIG_KGDB) += excite_dbg_io.o
obj-m += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a..0000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK 25000000
-#define BASE_BAUD (UART_CLK / 16)
-#define REGISTER_BASE_0 0x0208UL
-#define REGISTER_BASE_1 0x0238UL
-
-#define REGISTER_BASE_DBG REGISTER_BASE_1
-
-#define CPRR 0x0004
-#define UACFG 0x0200
-#define UAINTS 0x0204
-#define UARBR (REGISTER_BASE_DBG + 0x0000)
-#define UATHR (REGISTER_BASE_DBG + 0x0004)
-#define UADLL (REGISTER_BASE_DBG + 0x0008)
-#define UAIER (REGISTER_BASE_DBG + 0x000c)
-#define UADLH (REGISTER_BASE_DBG + 0x0010)
-#define UAIIR (REGISTER_BASE_DBG + 0x0014)
-#define UAFCR (REGISTER_BASE_DBG + 0x0018)
-#define UALCR (REGISTER_BASE_DBG + 0x001c)
-#define UAMCR (REGISTER_BASE_DBG + 0x0020)
-#define UALSR (REGISTER_BASE_DBG + 0x0024)
-#define UAMSR (REGISTER_BASE_DBG + 0x0028)
-#define UASCR (REGISTER_BASE_DBG + 0x002c)
-
-#define PARITY_NONE 0
-#define PARITY_ODD 0x08
-#define PARITY_EVEN 0x18
-#define PARITY_MARK 0x28
-#define PARITY_SPACE 0x38
-
-#define DATA_5BIT 0x0
-#define DATA_6BIT 0x1
-#define DATA_7BIT 0x2
-#define DATA_8BIT 0x3
-
-#define STOP_1BIT 0x0
-#define STOP_2BIT 0x4
-
-#define BAUD_DBG 57600
-#define PARITY_DBG PARITY_NONE
-#define DATA_DBG DATA_8BIT
-#define STOP_DBG STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
- const u32 divisor = BASE_BAUD / BAUD_DBG;
-
- /* Take the UART out of reset */
- titan_writel(0x00ff1cff, CPRR);
- titan_writel(0x00000000, UACFG);
- titan_writel(0x00000002, UACFG);
-
- titan_writel(0x0, UALCR);
- titan_writel(0x0, UAIER);
-
- /* Disable FIFOs */
- titan_writel(0x00, UAFCR);
-
- titan_writel(0x80, UALCR);
- titan_writel(divisor & 0xff, UADLL);
- titan_writel((divisor & 0xff00) >> 8, UADLH);
- titan_writel(0x0, UALCR);
-
- titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
- /* Enable receiver interrupt */
- titan_readl(UARBR);
- titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
- while (!(titan_readl(UALSR) & 0x1));
- return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
- while (!(titan_readl(UALSR) & 0x20));
- titan_writel(data, UATHR);
- return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
- if (unlikely(
- ((titan_readl(UAIIR) & 0x7) == 4)
- && ((titan_readl(UARBR) & 0xff) == 0x3)))
- set_async_breakpoint(®s->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e06..934e0a6 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@
mips_cpu_irq_init();
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
- excite_kgdb_init();
-#endif
}
asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@
msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
if ((pending & (1 << TITAN_IRQ)) && msgint) {
ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
- excite_kgdb_inthdl();
-#endif
do_IRQ(TITAN_IRQ);
return;
}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d..d66b3b8 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@
/* Take the DUART out of reset */
titan_writel(0x00ff1cff, CPRR);
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
/* Enable both ports */
titan_writel(MASK_SER0 | MASK_SER1, UACFG);
#else
/* Enable port #0 only */
titan_writel(MASK_SER0, UACFG);
-#endif /* defined(CONFIG_KGDB) */
+#endif
/*
* Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7e..eb44b72 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep 6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
#
CONFIG_MIPS=y
@@ -10,9 +10,11 @@
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -207,18 +242,18 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -232,8 +267,8 @@
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -250,6 +285,7 @@
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -269,6 +305,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -305,6 +336,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -337,6 +372,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -350,6 +386,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -423,7 +461,9 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -462,10 +502,15 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -572,6 +621,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -580,7 +630,6 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -588,7 +637,6 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -642,7 +689,9 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -664,65 +713,122 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -743,6 +849,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -751,15 +858,18 @@
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -800,15 +913,11 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -833,16 +942,10 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -858,6 +961,8 @@
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@
#
# on-CPU RTC drivers
#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -923,22 +1013,22 @@
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
@@ -983,32 +1072,28 @@
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
#
@@ -1057,14 +1134,95 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad6..a279165 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef..8944d15 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e8..ab17973 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082..b65803f 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e3244..a190ac0 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80..4e465e9 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575..831d3e5 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@
# CONFIG_DEBUG_KERNEL is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d1947..dd13db4 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
# CONFIG_MIPS_UNCACHED is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd..db92726 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@
# CONFIG_DEBUG_KERNEL is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f7..9e21e33 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87..af67ed4 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996..7956f56 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5f..723bd51 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4..b5052fb 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5..c7c0864 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea9786..a9acaa2f 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_SB1XXX_CORELIS is not set
#
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43..ea8249c 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 1156770..d70627d 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb45..a56c4b8 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -41,7 +41,6 @@
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd3197..706f939 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@
obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
-obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_64BIT) += cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c44606..0000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0 mfc0
-#define DMTC0 mtc0
-#define LDC1 lwc1
-#define SDC1 lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0 dmfc0
-#define DMTC0 dmtc0
-#define LDC1 ldc1
-#define SDC1 ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
- .align 5
- NESTED(trap_low, GDB_FR_SIZE, sp)
- .set noat
- .set noreorder
-
- mfc0 k0, CP0_STATUS
- sll k0, 3 /* extract cu0 bit */
- bltz k0, 1f
- move k1, sp
-
- /*
- * Called from user mode, go somewhere else.
- */
- mfc0 k0, CP0_CAUSE
- andi k0, k0, 0x7c
-#ifdef CONFIG_64BIT
- dsll k0, k0, 1
-#endif
- PTR_L k1, saved_vectors(k0)
- jr k1
- nop
-1:
- move k0, sp
- PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above
- LONG_S k0, GDB_FR_REG29(sp)
- LONG_S $2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
- mfc0 v0, CP0_STATUS
- LONG_S v0, GDB_FR_STATUS(sp)
- mfc0 v0, CP0_CAUSE
- LONG_S v0, GDB_FR_CAUSE(sp)
- DMFC0 v0, CP0_EPC
- LONG_S v0, GDB_FR_EPC(sp)
- DMFC0 v0, CP0_BADVADDR
- LONG_S v0, GDB_FR_BADVADDR(sp)
- mfhi v0
- LONG_S v0, GDB_FR_HI(sp)
- mflo v0
- LONG_S v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
- LONG_S zero, GDB_FR_REG0(sp) /* I know... */
- LONG_S $1, GDB_FR_REG1(sp)
- /* v0 already saved */
- LONG_S $3, GDB_FR_REG3(sp)
- LONG_S $4, GDB_FR_REG4(sp)
- LONG_S $5, GDB_FR_REG5(sp)
- LONG_S $6, GDB_FR_REG6(sp)
- LONG_S $7, GDB_FR_REG7(sp)
- LONG_S $8, GDB_FR_REG8(sp)
- LONG_S $9, GDB_FR_REG9(sp)
- LONG_S $10, GDB_FR_REG10(sp)
- LONG_S $11, GDB_FR_REG11(sp)
- LONG_S $12, GDB_FR_REG12(sp)
- LONG_S $13, GDB_FR_REG13(sp)
- LONG_S $14, GDB_FR_REG14(sp)
- LONG_S $15, GDB_FR_REG15(sp)
- LONG_S $16, GDB_FR_REG16(sp)
- LONG_S $17, GDB_FR_REG17(sp)
- LONG_S $18, GDB_FR_REG18(sp)
- LONG_S $19, GDB_FR_REG19(sp)
- LONG_S $20, GDB_FR_REG20(sp)
- LONG_S $21, GDB_FR_REG21(sp)
- LONG_S $22, GDB_FR_REG22(sp)
- LONG_S $23, GDB_FR_REG23(sp)
- LONG_S $24, GDB_FR_REG24(sp)
- LONG_S $25, GDB_FR_REG25(sp)
- LONG_S $26, GDB_FR_REG26(sp)
- LONG_S $27, GDB_FR_REG27(sp)
- LONG_S $28, GDB_FR_REG28(sp)
- /* sp already saved */
- LONG_S $30, GDB_FR_REG30(sp)
- LONG_S $31, GDB_FR_REG31(sp)
-
- CLI /* disable interrupts */
- TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
- mfc0 v0, CP0_STATUS /* FPU enabled? */
- srl v0, v0, 16
- andi v0, v0, (ST0_CU1 >> 16)
-
- beqz v0,2f /* disabled, skip */
- nop
-
- SDC1 $0, GDB_FR_FPR0(sp)
- SDC1 $1, GDB_FR_FPR1(sp)
- SDC1 $2, GDB_FR_FPR2(sp)
- SDC1 $3, GDB_FR_FPR3(sp)
- SDC1 $4, GDB_FR_FPR4(sp)
- SDC1 $5, GDB_FR_FPR5(sp)
- SDC1 $6, GDB_FR_FPR6(sp)
- SDC1 $7, GDB_FR_FPR7(sp)
- SDC1 $8, GDB_FR_FPR8(sp)
- SDC1 $9, GDB_FR_FPR9(sp)
- SDC1 $10, GDB_FR_FPR10(sp)
- SDC1 $11, GDB_FR_FPR11(sp)
- SDC1 $12, GDB_FR_FPR12(sp)
- SDC1 $13, GDB_FR_FPR13(sp)
- SDC1 $14, GDB_FR_FPR14(sp)
- SDC1 $15, GDB_FR_FPR15(sp)
- SDC1 $16, GDB_FR_FPR16(sp)
- SDC1 $17, GDB_FR_FPR17(sp)
- SDC1 $18, GDB_FR_FPR18(sp)
- SDC1 $19, GDB_FR_FPR19(sp)
- SDC1 $20, GDB_FR_FPR20(sp)
- SDC1 $21, GDB_FR_FPR21(sp)
- SDC1 $22, GDB_FR_FPR22(sp)
- SDC1 $23, GDB_FR_FPR23(sp)
- SDC1 $24, GDB_FR_FPR24(sp)
- SDC1 $25, GDB_FR_FPR25(sp)
- SDC1 $26, GDB_FR_FPR26(sp)
- SDC1 $27, GDB_FR_FPR27(sp)
- SDC1 $28, GDB_FR_FPR28(sp)
- SDC1 $29, GDB_FR_FPR29(sp)
- SDC1 $30, GDB_FR_FPR30(sp)
- SDC1 $31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
- cfc1 v0, CP1_STATUS
- LONG_S v0, GDB_FR_FSR(sp)
- cfc1 v0, CP1_REVISION
- LONG_S v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
- LONG_S sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
- mfc0 v0, CP0_INDEX
- LONG_S v0, GDB_FR_CP0_INDEX(sp)
- mfc0 v0, CP0_RANDOM
- LONG_S v0, GDB_FR_CP0_RANDOM(sp)
- DMFC0 v0, CP0_ENTRYLO0
- LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp)
- DMFC0 v0, CP0_ENTRYLO1
- LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp)
- DMFC0 v0, CP0_CONTEXT
- LONG_S v0, GDB_FR_CP0_CONTEXT(sp)
- mfc0 v0, CP0_PAGEMASK
- LONG_S v0, GDB_FR_CP0_PAGEMASK(sp)
- mfc0 v0, CP0_WIRED
- LONG_S v0, GDB_FR_CP0_WIRED(sp)
- DMFC0 v0, CP0_ENTRYHI
- LONG_S v0, GDB_FR_CP0_ENTRYHI(sp)
- mfc0 v0, CP0_PRID
- LONG_S v0, GDB_FR_CP0_PRID(sp)
-
- .set at
-
-/*
- * Continue with the higher level handler
- */
-
- move a0,sp
-
- jal handle_exception
- nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
- .set noat
-
- LONG_L v0, GDB_FR_CP0_ENTRYHI(sp)
- LONG_L v1, GDB_FR_CP0_WIRED(sp)
- DMTC0 v0, CP0_ENTRYHI
- mtc0 v1, CP0_WIRED
- LONG_L v0, GDB_FR_CP0_PAGEMASK(sp)
- LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp)
- mtc0 v0, CP0_PAGEMASK
- DMTC0 v1, CP0_ENTRYLO1
- LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp)
- LONG_L v1, GDB_FR_CP0_INDEX(sp)
- DMTC0 v0, CP0_ENTRYLO0
- LONG_L v0, GDB_FR_CP0_CONTEXT(sp)
- mtc0 v1, CP0_INDEX
- DMTC0 v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
- mfc0 v0, CP0_STATUS /* check if the FPU is enabled */
- srl v0, v0, 16
- andi v0, v0, (ST0_CU1 >> 16)
-
- beqz v0, 3f /* disabled, skip */
- nop
-
- LDC1 $31, GDB_FR_FPR31(sp)
- LDC1 $30, GDB_FR_FPR30(sp)
- LDC1 $29, GDB_FR_FPR29(sp)
- LDC1 $28, GDB_FR_FPR28(sp)
- LDC1 $27, GDB_FR_FPR27(sp)
- LDC1 $26, GDB_FR_FPR26(sp)
- LDC1 $25, GDB_FR_FPR25(sp)
- LDC1 $24, GDB_FR_FPR24(sp)
- LDC1 $23, GDB_FR_FPR23(sp)
- LDC1 $22, GDB_FR_FPR22(sp)
- LDC1 $21, GDB_FR_FPR21(sp)
- LDC1 $20, GDB_FR_FPR20(sp)
- LDC1 $19, GDB_FR_FPR19(sp)
- LDC1 $18, GDB_FR_FPR18(sp)
- LDC1 $17, GDB_FR_FPR17(sp)
- LDC1 $16, GDB_FR_FPR16(sp)
- LDC1 $15, GDB_FR_FPR15(sp)
- LDC1 $14, GDB_FR_FPR14(sp)
- LDC1 $13, GDB_FR_FPR13(sp)
- LDC1 $12, GDB_FR_FPR12(sp)
- LDC1 $11, GDB_FR_FPR11(sp)
- LDC1 $10, GDB_FR_FPR10(sp)
- LDC1 $9, GDB_FR_FPR9(sp)
- LDC1 $8, GDB_FR_FPR8(sp)
- LDC1 $7, GDB_FR_FPR7(sp)
- LDC1 $6, GDB_FR_FPR6(sp)
- LDC1 $5, GDB_FR_FPR5(sp)
- LDC1 $4, GDB_FR_FPR4(sp)
- LDC1 $3, GDB_FR_FPR3(sp)
- LDC1 $2, GDB_FR_FPR2(sp)
- LDC1 $1, GDB_FR_FPR1(sp)
- LDC1 $0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
- /* Read-modify write of Status must be atomic */
- mfc0 t2, CP0_TCSTATUS
- ori t1, t2, TCSTATUS_IXMT
- mtc0 t1, CP0_TCSTATUS
- andi t2, t2, TCSTATUS_IXMT
- _ehb
- DMT 9 # dmt t1
- jal mips_ihb
- nop
-#endif /* CONFIG_MIPS_MT_SMTC */
- mfc0 t0, CP0_STATUS
- ori t0, 0x1f
- xori t0, 0x1f
- mtc0 t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
- andi t1, t1, VPECONTROL_TE
- beqz t1, 9f
- nop
- EMT # emt
-9:
- mfc0 t1, CP0_TCSTATUS
- xori t1, t1, TCSTATUS_IXMT
- or t1, t1, t2
- mtc0 t1, CP0_TCSTATUS
- _ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
- LONG_L v0, GDB_FR_STATUS(sp)
- LONG_L v1, GDB_FR_EPC(sp)
- mtc0 v0, CP0_STATUS
- DMTC0 v1, CP0_EPC
- LONG_L v0, GDB_FR_HI(sp)
- LONG_L v1, GDB_FR_LO(sp)
- mthi v0
- mtlo v1
- LONG_L $31, GDB_FR_REG31(sp)
- LONG_L $30, GDB_FR_REG30(sp)
- LONG_L $28, GDB_FR_REG28(sp)
- LONG_L $27, GDB_FR_REG27(sp)
- LONG_L $26, GDB_FR_REG26(sp)
- LONG_L $25, GDB_FR_REG25(sp)
- LONG_L $24, GDB_FR_REG24(sp)
- LONG_L $23, GDB_FR_REG23(sp)
- LONG_L $22, GDB_FR_REG22(sp)
- LONG_L $21, GDB_FR_REG21(sp)
- LONG_L $20, GDB_FR_REG20(sp)
- LONG_L $19, GDB_FR_REG19(sp)
- LONG_L $18, GDB_FR_REG18(sp)
- LONG_L $17, GDB_FR_REG17(sp)
- LONG_L $16, GDB_FR_REG16(sp)
- LONG_L $15, GDB_FR_REG15(sp)
- LONG_L $14, GDB_FR_REG14(sp)
- LONG_L $13, GDB_FR_REG13(sp)
- LONG_L $12, GDB_FR_REG12(sp)
- LONG_L $11, GDB_FR_REG11(sp)
- LONG_L $10, GDB_FR_REG10(sp)
- LONG_L $9, GDB_FR_REG9(sp)
- LONG_L $8, GDB_FR_REG8(sp)
- LONG_L $7, GDB_FR_REG7(sp)
- LONG_L $6, GDB_FR_REG6(sp)
- LONG_L $5, GDB_FR_REG5(sp)
- LONG_L $4, GDB_FR_REG4(sp)
- LONG_L $3, GDB_FR_REG3(sp)
- LONG_L $2, GDB_FR_REG2(sp)
- LONG_L $1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
- LONG_L k0, GDB_FR_EPC(sp)
- LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */
- jr k0
- rfe
-#else
- LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */
-
- .set mips3
- eret
- .set mips0
-#endif
- .set at
- .set reorder
- END(trap_low)
-
-LEAF(kgdb_read_byte)
-4: lb t0, (a0)
- sb t0, (a1)
- li v0, 0
- jr ra
- .section __ex_table,"a"
- PTR 4b, kgdbfault
- .previous
- END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5: sb a0, (a1)
- li v0, 0
- jr ra
- .section __ex_table,"a"
- PTR 5b, kgdbfault
- .previous
- END(kgdb_write_byte)
-
- .type kgdbfault@function
- .ent kgdbfault
-
-kgdbfault: li v0, -EFAULT
- jr ra
- .end kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab..0000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- * arch/mips/kernel/gdb-stub.c
- *
- * Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- * Contributed by HP Systems
- *
- * Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- * Copyright (C) 1995 Andreas Busse
- *
- * Copyright (C) 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- * To enable debugger support, two things need to happen. One, a
- * call to set_debug_traps() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * Two, a breakpoint needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint(). Breakpoint()
- * simulates a breakpoint by executing a BREAK instruction.
- *
- *
- * The following gdb commands are supported:
- *
- * command function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- *
- * k kill
- *
- * ? What was the last sigval ? SNN (signal NN)
- *
- * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
- * baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum. A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer. '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host: Reply:
- * $m0,10#2a +$00010203040506070809101112131415#42
- *
- *
- * ==============
- * MORE EXAMPLES:
- * ==============
- *
- * For reference -- the following are the steps that one
- * company took (RidgeRun Inc) to get remote gdb debugging
- * going. In this scenario the host machine was a PC and the
- * target platform was a Galileo EVB64120A MIPS evaluation
- * board.
- *
- * Step 1:
- * First download gdb-5.0.tar.gz from the internet.
- * and then build/install the package.
- *
- * Example:
- * $ tar zxf gdb-5.0.tar.gz
- * $ cd gdb-5.0
- * $ ./configure --target=mips-linux-elf
- * $ make
- * $ install
- * $ which mips-linux-elf-gdb
- * /usr/local/bin/mips-linux-elf-gdb
- *
- * Step 2:
- * Configure linux for remote debugging and build it.
- *
- * Example:
- * $ cd ~/linux
- * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- * $ make
- *
- * Step 3:
- * Download the kernel to the remote target and start
- * the kernel running. It will promptly halt and wait
- * for the host gdb session to connect. It does this
- * since the "Kernel Hacking" option has defined
- * CONFIG_KGDB which in turn enables your calls
- * to:
- * set_debug_traps();
- * breakpoint();
- *
- * Step 4:
- * Start the gdb session on the host.
- *
- * Example:
- * $ mips-linux-elf-gdb vmlinux
- * (gdb) set remotebaud 115200
- * (gdb) target remote /dev/ttyS1
- * ...at this point you are connected to
- * the remote target and can use gdb
- * in the normal fasion. Setting
- * breakpoints, single stepping,
- * printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c); /* write a single character */
-extern char getDebugChar(void); /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
- [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized; /* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access. Note that they'll crash anyway if
- we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
- if (ch >= 'a' && ch <= 'f')
- return ch-'a'+10;
- if (ch >= '0' && ch <= '9')
- return ch-'0';
- if (ch >= 'A' && ch <= 'F')
- return ch-'A'+10;
- return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- unsigned char ch;
-
- do {
- /*
- * wait around for the start character,
- * ignore all other characters
- */
- while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
- checksum = 0;
- xmitcsum = -1;
- count = 0;
-
- /*
- * now, read until a # or end of buffer is found
- */
- while (count < BUFMAX) {
- ch = getDebugChar();
- if (ch == '#')
- break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- if (count >= BUFMAX)
- continue;
-
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(getDebugChar() & 0x7f);
-
- if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
- else {
- putDebugChar('+'); /* successful transfer */
-
- /*
- * if a sequence char is present,
- * reply the sequence ID
- */
- if (buffer[2] == ':') {
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
-
- /*
- * remove sequence chars from buffer
- */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
- }
- }
- }
- }
- while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
- unsigned char checksum;
- int count;
- unsigned char ch;
-
- /*
- * $<packet info>#<checksum>.
- */
-
- do {
- putDebugChar('$');
- checksum = 0;
- count = 0;
-
- while ((ch = buffer[count]) != 0) {
- if (!(putDebugChar(ch)))
- return;
- checksum += ch;
- count += 1;
- }
-
- putDebugChar('#');
- putDebugChar(hexchars[checksum >> 4]);
- putDebugChar(hexchars[checksum & 0xf]);
-
- }
- while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
- unsigned char ch;
-
- while (count-- > 0) {
- if (kgdb_read_byte(mem++, &ch) != 0)
- return 0;
- *buf++ = hexchars[ch >> 4];
- *buf++ = hexchars[ch & 0xf];
- }
-
- *buf = 0;
-
- return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
- int i;
- unsigned char ch;
-
- for (i=0; i<count; i++)
- {
- if (binary) {
- ch = *buf++;
- if (ch == 0x7d)
- ch = 0x20 ^ *buf++;
- }
- else {
- ch = hex(*buf++) << 4;
- ch |= hex(*buf++);
- }
- if (kgdb_write_byte(ch, mem++) != 0)
- return 0;
- }
-
- return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands. It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
- unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */
- unsigned char signo; /* Signal that we map this trap into */
-} hard_trap_info[] = {
- { 6, SIGBUS }, /* instruction bus error */
- { 7, SIGBUS }, /* data bus error */
- { 9, SIGTRAP }, /* break */
- { 10, SIGILL }, /* reserved instruction */
-/* { 11, SIGILL }, */ /* CPU unusable */
- { 12, SIGFPE }, /* overflow */
- { 13, SIGTRAP }, /* trap */
- { 14, SIGSEGV }, /* virtual instruction cache coherency */
- { 15, SIGFPE }, /* floating point exception */
- { 23, SIGSEGV }, /* watch */
- { 31, SIGSEGV }, /* virtual data cache coherency */
- { 0, 0} /* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
- struct hard_trap_info *ht;
- unsigned long flags;
- unsigned char c;
-
- local_irq_save(flags);
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
- putDebugChar('+'); /* 'hello world' */
- /*
- * In case GDB is started before us, ack any packets
- * (presumably "$?#xx") sitting there.
- */
- while((c = getDebugChar()) != '$');
- while((c = getDebugChar()) != '#');
- c = getDebugChar(); /* eat first csum byte */
- c = getDebugChar(); /* eat second csum byte */
- putDebugChar('+'); /* ack it */
-
- initialized = 1;
- local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
- struct hard_trap_info *ht;
- unsigned long flags;
-
- local_irq_save(flags);
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- set_except_vector(ht->tt, saved_vectors[ht->tt]);
- local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
- struct hard_trap_info *ht;
-
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- if (ht->tt == tt)
- return ht->signo;
-
- return SIGHUP; /* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
- int numChars = 0;
- int hexValue;
-
- *intValue = 0;
-
- while (**ptr) {
- hexValue = hex(**ptr);
- if (hexValue < 0)
- break;
-
- *intValue = (*intValue << 4) | hexValue;
- numChars ++;
-
- (*ptr)++;
- }
-
- return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
- int numChars = 0;
- int hexValue;
-
- *longValue = 0;
-
- while (**ptr) {
- hexValue = hex(**ptr);
- if (hexValue < 0)
- break;
-
- *longValue = (*longValue << 4) | hexValue;
- numChars ++;
-
- (*ptr)++;
- }
-
- return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
- /*
- * Saved main processor registers
- */
- printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg0, regs->reg1, regs->reg2, regs->reg3,
- regs->reg4, regs->reg5, regs->reg6, regs->reg7);
- printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg8, regs->reg9, regs->reg10, regs->reg11,
- regs->reg12, regs->reg13, regs->reg14, regs->reg15);
- printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg16, regs->reg17, regs->reg18, regs->reg19,
- regs->reg20, regs->reg21, regs->reg22, regs->reg23);
- printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg24, regs->reg25, regs->reg26, regs->reg27,
- regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
- /*
- * Saved cp0 registers
- */
- printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n",
- regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
- unsigned long addr;
- unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
- union mips_instruction insn;
- unsigned long targ;
- int is_branch, is_cond, i;
-
- targ = regs->cp0_epc;
- insn.word = *(unsigned int *)targ;
- is_branch = is_cond = 0;
-
- switch (insn.i_format.opcode) {
- /*
- * jr and jalr are in r_format format.
- */
- case spec_op:
- switch (insn.r_format.func) {
- case jalr_op:
- case jr_op:
- targ = *(®s->reg0 + insn.r_format.rs);
- is_branch = 1;
- break;
- }
- break;
-
- /*
- * This group contains:
- * bltz_op, bgez_op, bltzl_op, bgezl_op,
- * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
- */
- case bcond_op:
- is_branch = is_cond = 1;
- targ += 4 + (insn.i_format.simmediate << 2);
- break;
-
- /*
- * These are unconditional and in j_format.
- */
- case jal_op:
- case j_op:
- is_branch = 1;
- targ += 4;
- targ >>= 28;
- targ <<= 28;
- targ |= (insn.j_format.target << 2);
- break;
-
- /*
- * These are conditional.
- */
- case beq_op:
- case beql_op:
- case bne_op:
- case bnel_op:
- case blez_op:
- case blezl_op:
- case bgtz_op:
- case bgtzl_op:
- case cop0_op:
- case cop1_op:
- case cop2_op:
- case cop1x_op:
- is_branch = is_cond = 1;
- targ += 4 + (insn.i_format.simmediate << 2);
- break;
- }
-
- if (is_branch) {
- i = 0;
- if (is_cond && targ != (regs->cp0_epc + 8)) {
- step_bp[i].addr = regs->cp0_epc + 8;
- step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
- *(unsigned *)(regs->cp0_epc + 8) = BP;
- }
- step_bp[i].addr = targ;
- step_bp[i].val = *(unsigned *)targ;
- *(unsigned *)targ = BP;
- } else {
- step_bp[0].addr = regs->cp0_epc + 4;
- step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4);
- *(unsigned *)(regs->cp0_epc + 4) = BP;
- }
-}
-
-/*
- * If asynchronously interrupted by gdb, then we need to set a breakpoint
- * at the interrupted instruction so that we wind up stopped with a
- * reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required. The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
- /* skip breaking into userland */
- if ((*epc & 0x80000000) == 0)
- return;
-
-#ifdef CONFIG_SMP
- /* avoid deadlock if someone is make IPC */
- if (spin_is_locked(&smp_call_lock))
- return;
-#endif
-
- async_bp.addr = *epc;
- *epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
- unsigned flags;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
-
- __raw_spin_lock(&kgdb_cpulock[cpu]);
- __raw_spin_unlock(&kgdb_cpulock[cpu]);
-
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
- cpumask_t mask = cpu_online_map;
- struct call_data_struct data;
- int cpu = smp_processor_id();
- int cpus;
-
- /*
- * Can die spectacularly if this CPU isn't yet marked online
- */
- BUG_ON(!cpu_online(cpu));
-
- cpu_clear(cpu, mask);
- cpus = cpus_weight(mask);
- if (!cpus)
- return 0;
-
- if (spin_is_locked(&smp_call_lock)) {
- /*
- * Some other processor is trying to make us do something
- * but we're not going to respond... give up
- */
- return -1;
- }
-
- /*
- * We will continue here, accepting the fact that
- * the kernel may deadlock if another CPU attempts
- * to call smp_call_function now...
- */
-
- data.func = kgdb_wait;
- data.info = NULL;
- atomic_set(&data.started, 0);
- data.wait = 0;
-
- spin_lock(&smp_call_lock);
- call_data = &data;
- mb();
-
- core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
- /* Wait for response */
- /* FIXME: lock-up detection, backtrace on lock-up */
- while (atomic_read(&data.started) != cpus)
- barrier();
-
- call_data = NULL;
- spin_unlock(&smp_call_lock);
-#endif
-
- return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb. It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
- int trap; /* Trap type */
- int sigval;
- long addr;
- int length;
- char *ptr;
- unsigned long *stack;
- int i;
- int bflag = 0;
-
- kgdb_started = 1;
-
- /*
- * acquire the big kgdb spinlock
- */
- if (!spin_trylock(&kgdb_lock)) {
- /*
- * some other CPU has the lock, we should go back to
- * receive the gdb_wait IPC
- */
- return;
- }
-
- /*
- * If we're in async_breakpoint(), restore the real EPC from
- * the breakpoint.
- */
- if (regs->cp0_epc == (unsigned long)async_breakinst) {
- regs->cp0_epc = async_bp.addr;
- async_bp.addr = 0;
- }
-
- /*
- * acquire the CPU spinlocks
- */
- for_each_online_cpu(i)
- if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
- panic("kgdb: couldn't get cpulock %d\n", i);
-
- /*
- * force other cpus to enter kgdb
- */
- kgdb_smp_call_kgdb_wait();
-
- /*
- * If we're in breakpoint() increment the PC
- */
- trap = (regs->cp0_cause & 0x7c) >> 2;
- if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
- regs->cp0_epc += 4;
-
- /*
- * If we were single_stepping, restore the opcodes hoisted
- * for the breakpoint[s].
- */
- if (step_bp[0].addr) {
- *(unsigned *)step_bp[0].addr = step_bp[0].val;
- step_bp[0].addr = 0;
-
- if (step_bp[1].addr) {
- *(unsigned *)step_bp[1].addr = step_bp[1].val;
- step_bp[1].addr = 0;
- }
- }
-
- stack = (long *)regs->reg29; /* stack ptr */
- sigval = computeSignal(trap);
-
- /*
- * reply to host that an exception has occurred
- */
- ptr = output_buffer;
-
- /*
- * Send trap type (converted to signal)
- */
- *ptr++ = 'T';
- *ptr++ = hexchars[sigval >> 4];
- *ptr++ = hexchars[sigval & 0xf];
-
- /*
- * Send Error PC
- */
- *ptr++ = hexchars[REG_EPC >> 4];
- *ptr++ = hexchars[REG_EPC & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- /*
- * Send frame pointer
- */
- *ptr++ = hexchars[REG_FP >> 4];
- *ptr++ = hexchars[REG_FP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- /*
- * Send stack pointer
- */
- *ptr++ = hexchars[REG_SP >> 4];
- *ptr++ = hexchars[REG_SP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- *ptr++ = 0;
- putpacket(output_buffer); /* send it off... */
-
- /*
- * Wait for input from remote GDB
- */
- while (1) {
- output_buffer[0] = 0;
- getpacket(input_buffer);
-
- switch (input_buffer[0])
- {
- case '?':
- output_buffer[0] = 'S';
- output_buffer[1] = hexchars[sigval >> 4];
- output_buffer[2] = hexchars[sigval & 0xf];
- output_buffer[3] = 0;
- break;
-
- /*
- * Detach debugger; let CPU run
- */
- case 'D':
- putpacket(output_buffer);
- goto finish_kgdb;
- break;
-
- case 'd':
- /* toggle debug flag */
- break;
-
- /*
- * Return the value of the CPU registers
- */
- case 'g':
- ptr = output_buffer;
- ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
- ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
- ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
- ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
- ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
- ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
- break;
-
- /*
- * set the value of the CPU registers - return OK
- */
- case 'G':
- {
- ptr = &input_buffer[1];
- hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0);
- ptr += 32*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0);
- ptr += 6*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0);
- ptr += 32*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0);
- ptr += 2*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0);
- ptr += 2*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0);
- strcpy(output_buffer, "OK");
- }
- break;
-
- /*
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA
- */
- case 'm':
- ptr = &input_buffer[1];
-
- if (hexToLong(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length)) {
- if (mem2hex((char *)addr, output_buffer, length, 1))
- break;
- strcpy(output_buffer, "E03");
- } else
- strcpy(output_buffer, "E01");
- break;
-
- /*
- * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
- */
- case 'X':
- bflag = 1;
- /* fall through */
-
- /*
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
- */
- case 'M':
- ptr = &input_buffer[1];
-
- if (hexToLong(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length)
- && *ptr++ == ':') {
- if (hex2mem(ptr, (char *)addr, length, bflag, 1))
- strcpy(output_buffer, "OK");
- else
- strcpy(output_buffer, "E03");
- }
- else
- strcpy(output_buffer, "E02");
- break;
-
- /*
- * cAA..AA Continue at address AA..AA(optional)
- */
- case 'c':
- /* try to read optional parameter, pc unchanged if no parm */
-
- ptr = &input_buffer[1];
- if (hexToLong(&ptr, &addr))
- regs->cp0_epc = addr;
-
- goto exit_kgdb_exception;
- break;
-
- /*
- * kill the program; let us try to restart the machine
- * Reset the whole machine.
- */
- case 'k':
- case 'r':
- machine_restart("kgdb restarts machine");
- break;
-
- /*
- * Step to next instruction
- */
- case 's':
- /*
- * There is no single step insn in the MIPS ISA, so we
- * use breakpoints and continue, instead.
- */
- single_step(regs);
- goto exit_kgdb_exception;
- /* NOTREACHED */
- break;
-
- /*
- * Set baud rate (bBB)
- * FIXME: Needs to be written
- */
- case 'b':
- {
-#if 0
- int baudrate;
- extern void set_timer_3();
-
- ptr = &input_buffer[1];
- if (!hexToInt(&ptr, &baudrate))
- {
- strcpy(output_buffer, "B01");
- break;
- }
-
- /* Convert baud rate to uart clock divider */
-
- switch (baudrate)
- {
- case 38400:
- baudrate = 16;
- break;
- case 19200:
- baudrate = 33;
- break;
- case 9600:
- baudrate = 65;
- break;
- default:
- baudrate = 0;
- strcpy(output_buffer, "B02");
- goto x1;
- }
-
- if (baudrate) {
- putpacket("OK"); /* Ack before changing speed */
- set_timer_3(baudrate); /* Set it */
- }
-#endif
- }
- break;
-
- } /* switch */
-
- /*
- * reply to the request
- */
-
- putpacket(output_buffer);
-
- } /* while */
-
- return;
-
-finish_kgdb:
- restore_debug_traps();
-
-exit_kgdb_exception:
- /* release locks so other CPUs can go */
- for_each_online_cpu(i)
- __raw_spin_unlock(&kgdb_cpulock[i]);
- spin_unlock(&kgdb_lock);
-
- __flush_cache_all();
- return;
-}
-
-/*
- * This function will generate a breakpoint exception. It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
- if (!initialized)
- return;
-
- __asm__ __volatile__(
- ".globl breakinst\n\t"
- ".set\tnoreorder\n\t"
- "nop\n"
- "breakinst:\tbreak\n\t"
- "nop\n\t"
- ".set\treorder"
- );
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
- __asm__ __volatile__(
- ".globl async_breakinst\n\t"
- ".set\tnoreorder\n\t"
- "nop\n"
- "async_breakinst:\tbreak\n\t"
- "nop\n\t"
- ".set\treorder"
- );
-}
-
-void adel(void)
-{
- __asm__ __volatile__(
- ".globl\tadel\n\t"
- "lui\t$8,0x8000\n\t"
- "lw\t$9,1($8)\n\t"
- );
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
- return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
- kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
- char outbuf[18];
-
- if (!kgdb_started)
- return;
-
- outbuf[0]='O';
-
- while(l) {
- int i = (l>8)?8:l;
- mem2hex((char *)str, &outbuf[1], i, 0);
- outbuf[(i*2)+1]=0;
- putpacket(outbuf);
- str += i;
- l -= i;
- }
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
- gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
- .name = "gdb",
- .write = gdb_console_write,
- .flags = CON_PRINTBUFFER,
- .index = -1
-};
-
-static int __init register_gdb_console(void)
-{
- register_console(&gdb_console);
-
- return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a..4b4007b 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/kallsyms.h>
+#include <linux/kgdb.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
int allocate_irqno(void)
@@ -126,33 +131,22 @@
atomic_inc(&irq_err_count);
}
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
- kgdb_flag = 0;
- return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
void __init init_IRQ(void)
{
int i;
+#ifdef CONFIG_KGDB
+ if (kgdb_early_setup)
+ return;
+#endif
+
for (i = 0; i < NR_IRQS; i++)
set_irq_noprobe(i);
arch_init_irq();
#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- printk("Wait for gdb client connection ...\n");
- set_debug_traps();
- breakpoint();
- }
+ if (!kgdb_early_setup)
+ kgdb_early_setup = 1;
#endif
}
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 0000000..c5a8b2d
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,281 @@
+/*
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2004-2005 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h> /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+ unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */
+ unsigned char signo; /* Signal that we map this trap into */
+} hard_trap_info[] = {
+ { 6, SIGBUS }, /* instruction bus error */
+ { 7, SIGBUS }, /* data bus error */
+ { 9, SIGTRAP }, /* break */
+/* { 11, SIGILL }, */ /* CPU unusable */
+ { 12, SIGFPE }, /* overflow */
+ { 13, SIGTRAP }, /* trap */
+ { 14, SIGSEGV }, /* virtual instruction cache coherency */
+ { 15, SIGFPE }, /* floating point exception */
+ { 23, SIGSEGV }, /* watch */
+ { 31, SIGSEGV }, /* virtual data cache coherency */
+ { 0, 0} /* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+ __asm__ __volatile__(
+ ".globl breakinst\n\t"
+ ".set\tnoreorder\n\t"
+ "nop\n"
+ "breakinst:\tbreak\n\t"
+ "nop\n\t"
+ ".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+ kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ local_irq_enable();
+ smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+ local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+ struct hard_trap_info *ht;
+
+ for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+ if (ht->tt == tt)
+ return ht->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+ u32 *ptr = (u32 *)gdb_regs;
+#else
+ u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 32; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ *(ptr++) = regs->cp0_status;
+ *(ptr++) = regs->lo;
+ *(ptr++) = regs->hi;
+ *(ptr++) = regs->cp0_badvaddr;
+ *(ptr++) = regs->cp0_cause;
+ *(ptr++) = regs->cp0_epc;
+
+ /* FP REGS */
+ if (!(current && (regs->cp0_status & ST0_CU1)))
+ return;
+
+ save_fp(current);
+ for (reg = 0; reg < 32; reg++)
+ *(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+ const u32 *ptr = (u32 *)gdb_regs;
+#else
+ const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 32; reg++)
+ regs->regs[reg] = *(ptr++);
+
+ regs->cp0_status = *(ptr++);
+ regs->lo = *(ptr++);
+ regs->hi = *(ptr++);
+ regs->cp0_badvaddr = *(ptr++);
+ regs->cp0_cause = *(ptr++);
+ regs->cp0_epc = *(ptr++);
+
+ /* FP REGS from current */
+ if (!(current && (regs->cp0_status & ST0_CU1)))
+ return;
+
+ for (reg = 0; reg < 32; reg++)
+ current->thread.fpu.fpr[reg] = *(ptr++);
+ restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ int reg;
+ struct thread_info *ti = task_thread_info(p);
+ unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+ struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+ u32 *ptr = (u32 *)gdb_regs;
+#else
+ u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 16; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ /* S0 - S7 */
+ for (reg = 16; reg < 24; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ for (reg = 24; reg < 28; reg++)
+ *(ptr++) = 0;
+
+ /* GP, SP, FP, RA */
+ for (reg = 28; reg < 32; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ *(ptr++) = regs->cp0_status;
+ *(ptr++) = regs->lo;
+ *(ptr++) = regs->hi;
+ *(ptr++) = regs->cp0_badvaddr;
+ *(ptr++) = regs->cp0_cause;
+ *(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+ void *ptr)
+{
+ struct die_args *args = (struct die_args *)ptr;
+ struct pt_regs *regs = args->regs;
+ int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+ if (fixup_exception(regs))
+ return NOTIFY_DONE;
+
+ /* Userpace events, ignore. */
+ if (user_mode(regs))
+ return NOTIFY_DONE;
+
+ if (atomic_read(&kgdb_active) != -1)
+ kgdb_nmicallback(smp_processor_id(), regs);
+
+ if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+ return NOTIFY_DONE;
+
+ if (atomic_read(&kgdb_setting_breakpoint))
+ if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+ regs->cp0_epc += 4;
+
+ /* In SMP mode, __flush_cache_all does IPI */
+ local_irq_enable();
+ __flush_cache_all();
+
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+ .notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *regs)
+{
+ char *ptr;
+ unsigned long address;
+ int cpu = smp_processor_id();
+
+ switch (remcom_in_buffer[0]) {
+ case 's':
+ case 'c':
+ /* handle the optional parameter */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &address))
+ regs->cp0_epc = address;
+
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+ if (remcom_in_buffer[0] == 's')
+ if (kgdb_contthread)
+ atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+ union mips_instruction insn = {
+ .r_format = {
+ .opcode = spec_op,
+ .func = break_op,
+ }
+ };
+ memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+ register_die_notifier(&kgdb_notifier);
+
+ return 0;
+}
+
+/*
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9..426cced 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
#include <linux/bootmem.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
@@ -425,6 +427,10 @@
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
data ? "Data" : "Instruction",
field, regs->cp0_epc, field, regs->regs[31]);
+ if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+ == NOTIFY_STOP)
+ return;
+
die_if_kernel("Oops", regs);
force_sig(SIGBUS, current);
}
@@ -623,6 +629,9 @@
{
siginfo_t info;
+ if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+ == NOTIFY_STOP)
+ return;
die_if_kernel("FP exception in kernel code", regs);
if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +691,9 @@
siginfo_t info;
char b[40];
+ if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+ return;
+
/*
* A short test says that IRIX 5.3 sends SIGTRAP for all trap
* insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +774,10 @@
unsigned int opcode = 0;
int status = -1;
+ if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+ == NOTIFY_STOP)
+ return;
+
die_if_kernel("Reserved instruction in kernel code", regs);
if (unlikely(compute_return_epc(regs) < 0))
@@ -1537,6 +1553,11 @@
extern char except_vec4;
unsigned long i;
+#if defined(CONFIG_KGDB)
+ if (kgdb_early_setup)
+ return; /* Already done */
+#endif
+
if (cpu_has_veic || cpu_has_vint)
ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
else
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549..f0cf46a 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@
old_pagemask = read_c0_pagemask();
w = read_c0_wired();
write_c0_wired(w + 1);
- if (read_c0_wired() != w + 1) {
- printk("[tlbwired] No WIRED reg?\n");
- return;
- }
write_c0_index(w << 8);
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f806444..3b7dd72 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
-obj-$(CONFIG_KGDB) += malta-kgdb.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c065302..4832af2 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
#include <asm/mips-boards/malta.h>
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
int prom_argc;
int *_prom_argv, *_prom_envp;
@@ -173,51 +164,6 @@
}
#endif
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
- extern int (*generic_putDebugChar)(char);
- extern char (*generic_getDebugChar)(void);
- char *argptr;
- int line, speed;
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
- argptr += strlen("kgdb=ttyS");
- if (*argptr != '0' && *argptr != '1')
- printk("KGDB: Unknown serial line /dev/ttyS%c, "
- "falling back to /dev/ttyS1\n", *argptr);
- line = *argptr == '0' ? 0 : 1;
- printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
- speed = 0;
- if (*++argptr == ',')
- {
- int c;
- while ((c = *++argptr) && ('0' <= c && c <= '9'))
- speed = speed * 10 + c - '0';
- }
- {
- speed = rs_kgdb_hook(line, speed);
- generic_putDebugChar = rs_putDebugChar;
- generic_getDebugChar = rs_getDebugChar;
- }
-
- pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
- "session, please connect your debugger\n",
- line ? 1 : 0, speed);
-
- {
- char *s;
- for (s = "Please connect GDB to this port\r\n"; *s; )
- generic_putDebugChar(*s++);
- }
-
- /* Breakpoint is invoked after interrupts are initialised */
- }
-}
-#endif
-
static void __init mips_nmi_setup(void)
{
void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854d..0000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
- SERIAL_PORT_DFNS /* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
- return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
- int value)
-{
- outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
- int t;
- struct serial_state *ser = &rs_table[tty_no];
-
- kdb_port_info.state = ser;
- kdb_port_info.magic = SERIAL_MAGIC;
- kdb_port_info.port = ser->port;
- kdb_port_info.flags = ser->flags;
-
- /*
- * Clear all interrupts
- */
- serial_in(&kdb_port_info, UART_LSR);
- serial_in(&kdb_port_info, UART_RX);
- serial_in(&kdb_port_info, UART_IIR);
- serial_in(&kdb_port_info, UART_MSR);
-
- /*
- * Now, initialize the UART
- */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
- if (kdb_port_info.flags & ASYNC_FOURPORT) {
- kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
- t = UART_MCR_DTR | UART_MCR_OUT1;
- } else {
- kdb_port_info.MCR
- = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- t = UART_MCR_DTR | UART_MCR_RTS;
- }
-
- kdb_port_info.MCR = t; /* no interrupts, please */
- serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
- /*
- * and set the speed of the serial port
- */
- if (speed == 0)
- speed = 9600;
-
- t = kdb_port_info.state->baud_base / speed;
- /* set DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
- serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
- serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */
- /* reset DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
- return speed;
-}
-
-int putDebugChar(char c)
-{
- return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
- return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
- ;
-
- serial_out(&kdb_port_info, UART_TX, c);
-
- return 1;
-}
-
-char rs_getDebugChar(void)
-{
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
- ;
-
- return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54..dc78b89 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@
*/
enable_dma(4);
-#ifdef CONFIG_KGDB
- kgdb_config();
-#endif
-
#ifdef CONFIG_DMA_COHERENT
if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5..dd9e7b1 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f..0000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
- struct serial_state *ser = &rs_table[tty_no];
-
- kdb_port_info.state = ser;
- kdb_port_info.magic = SERIAL_MAGIC;
- kdb_port_info.port = tty_no;
- kdb_port_info.flags = ser->flags;
-
- /*
- * Clear all interrupts
- */
- /* Clear all the transmitter FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
- /* Clear all the receiver FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
- /* Clear all interrupts */
- ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
- IP3106_UART_INT_ALLTX;
-
- /*
- * Now, initialize the UART
- */
- ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
- /* Wait until FIFO not full */
- while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
- ;
- /* Send one char */
- ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
- return 1;
-}
-
-char getDebugChar(void)
-{
- char ch;
-
- /* Wait until there is a char in the FIFO */
- while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
- IP3106_UART_FIFO_RXFIFO) >> 8))
- ;
- /* Read one char */
- ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
- IP3106_UART_FIFO_RBRTHR;
- /* Advance the RX FIFO read pointer */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
- return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
- ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
- /* Clear all the transmitter FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
- /* Clear all the receiver FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
- /* Clear all interrupts */
- ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
- IP3106_UART_INT_ALLTX;
- ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad0342..f080f11 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e..acf1fa8 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
#include <linux/random.h>
#include <asm/io.h>
-#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c..2aed50f 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
-#ifdef CONFIG_KGDB
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
- int line;
- argptr += strlen("kgdb=ttyS");
- line = *argptr == '0' ? 0 : 1;
- rs_kgdb_hook(line);
- pr_info("KGDB: Using ttyS%i for session, "
- "please connect your debugger\n", line ? 1 : 0);
- }
-#endif
return;
}
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39..31c1501 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/tx3927.h>
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
- unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
{
- if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
- ((dev_fn & 0xff) << 0x08) |
- (where & 0xfc);
+ if (bus->parent == NULL &&
+ devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+ return -1;
+ tx3927_pcicptr->ica =
+ ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) |
+ (where & 0xfc) | (bus->parent ? 1 : 0);
/* clear M_ABORT and Disable M_ABORT Int. */
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
- return PCIBIOS_SUCCESSFUL;
+ return 0;
}
static inline int check_abort(void)
{
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+ if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+ /* flush write buffer */
+ iob();
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ }
return PCIBIOS_SUCCESSFUL;
}
static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where)) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
switch (size) {
case 1:
@@ -97,11 +100,8 @@
static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
@@ -117,11 +117,6 @@
tx3927_pcicptr->icd = cpu_to_le32(val);
}
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
- tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
- tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return check_abort();
}
@@ -202,3 +197,34 @@
PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
local_irq_restore(flags);
}
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+
+ if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+ printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+ regs->cp0_epc);
+ printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+ tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+ }
+ if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+ /* clear all pci errors */
+ tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+ tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+ tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+ tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+ return IRQ_HANDLED;
+ }
+ console_verbose();
+ panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+ tx3927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX3927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bc..5989e74 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
* option) any later version.
*/
#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/tx4927pcic.h>
static struct {
@@ -85,6 +87,8 @@
__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
| (PCI_STATUS_REC_MASTER_ABORT << 16),
&pcicptr->pcistatus);
+ /* flush write buffer */
+ iob();
code = PCIBIOS_DEVICE_NOT_FOUND;
}
return code;
@@ -192,6 +196,28 @@
.gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */
};
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+ unsigned long val;
+
+ if (!strncmp(str, "trdyto=", 7)) {
+ if (strict_strtoul(str + 7, 0, &val) == 0)
+ tx4927_pci_opts.trdyto = val;
+ return NULL;
+ }
+ if (!strncmp(str, "retryto=", 8)) {
+ if (strict_strtoul(str + 8, 0, &val) == 0)
+ tx4927_pci_opts.retryto = val;
+ return NULL;
+ }
+ if (!strncmp(str, "gbwc=", 5)) {
+ if (strict_strtoul(str + 5, 0, &val) == 0)
+ tx4927_pci_opts.gbwc = val;
+ return NULL;
+ }
+ return str;
+}
+
void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
struct pci_controller *channel, int extarb)
{
@@ -406,3 +432,95 @@
tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
}
}
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+ int i;
+ __u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+ printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+ for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+ if (i % 32 == 0) {
+ printk(KERN_CONT "\n");
+ printk(KERN_INFO "%04x:", i);
+ }
+ /* skip registers with side-effects */
+ if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+ || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+ || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+ || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+ printk(KERN_CONT " XXXXXXXX");
+ continue;
+ }
+ printk(KERN_CONT " %08x", __raw_readl(preg));
+ }
+ printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+ if (pcicptrs[i].pcicptr)
+ tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+ }
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ struct tx4927_pcic_reg __iomem *pcicptr =
+ (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+ if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+ printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+ (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+ tx4927_report_pcic_status1(pcicptr);
+ }
+ if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+ /* clear all pci errors */
+ __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+ | (TX4927_PCIC_PCISTATUS_ALL << 16),
+ &pcicptr->pcistatus);
+ __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+ __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+ __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+ return IRQ_HANDLED;
+ }
+ console_verbose();
+ tx4927_dump_pcic_settings1(pcicptr);
+ panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+ struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+ if (!pcicptr)
+ return;
+ if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+ /* Reset Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+ /*
+ * swap reqBP and reqXP (raise priority of SLC90E66).
+ * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+ * PCI Backplane board.
+ */
+ __raw_writel(0x72543610, &pcicptr->pbareqport);
+ __raw_writel(0, &pcicptr->pbabm);
+ /* Use Fixed ParkMaster (required by SLC90E66) */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+ /* Enable Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+ TX4927_PCIC_PBACFG_PBAEN,
+ &pcicptr->pbacfg);
+ printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+ __raw_readl(&pcicptr->pbareqport));
+ }
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+ tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a0..aaa9005 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
+#include <linux/interrupt.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4927.h>
@@ -81,3 +82,12 @@
pciclk = -1;
return pciclk;
}
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+ tx4927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX4927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e537551..60e2c52 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
+#include <linux/interrupt.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4938.h>
@@ -132,3 +133,12 @@
}
return -1;
}
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+ tx4927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX4927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 77bd5b6..c7fe6ec 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -328,7 +328,11 @@
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
#endif
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
{
+ if (pcibios_plat_setup)
+ return pcibios_plat_setup(str);
return str;
}
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de3430..f726162 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
#include <msp_int.h>
#include <msp_regs.h>
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val = (uint32_t)c;
-
- local_irq_disable();
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- uart[0] = val;
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- local_irq_enable();
-
- return 1;
-}
-
-char getDebugChar(void)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val;
-
- while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
- val = uart[0];
-
- return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
- unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
- /* Enable FIFOs */
- writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
- (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
- /* Select brtc divisor */
- writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Store divisor lsb */
- writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
- /* Store divisor msb */
- writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
- /* Set 8N1 mode */
- writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Disable flow control */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
- /* Disable receive interrupt(!) */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
void __init msp_serial_setup(void)
{
char *s;
@@ -139,17 +77,6 @@
case MACH_MSP7120_FPGA:
/* Enable UART1 on MSP4200 and MSP7120 */
*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
- /* Initialize UART1 for kgdb since PMON doesn't */
- if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
- if( mips_machtype == MACH_MSP4200_FPGA
- || mips_machtype == MACH_MSP7120_FPGA )
- initDebugPort(uartclk, 19200);
- else
- initDebugPort(uartclk, 57600);
- }
-#endif
break;
default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04..b16f95c 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
obj-y += irq.o prom.o py-console.o setup.o
-obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_SMP) += smp.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c70..0000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define YOSEMITE_BAUD_2400 2400
-#define YOSEMITE_BAUD_4800 4800
-#define YOSEMITE_BAUD_9600 9600
-#define YOSEMITE_BAUD_19200 19200
-#define YOSEMITE_BAUD_38400 38400
-#define YOSEMITE_BAUD_57600 57600
-#define YOSEMITE_BAUD_115200 115200
-
-#define YOSEMITE_PARITY_NONE 0
-#define YOSEMITE_PARITY_ODD 0x08
-#define YOSEMITE_PARITY_EVEN 0x18
-#define YOSEMITE_PARITY_MARK 0x28
-#define YOSEMITE_PARITY_SPACE 0x38
-
-#define YOSEMITE_DATA_5BIT 0x0
-#define YOSEMITE_DATA_6BIT 0x1
-#define YOSEMITE_DATA_7BIT 0x2
-#define YOSEMITE_DATA_8BIT 0x3
-
-#define YOSEMITE_STOP_1BIT 0x0
-#define YOSEMITE_STOP_2BIT 0x4
-
-/* This is crucial */
-#define SERIAL_REG_OFS 0x1
-
-#define SERIAL_RCV_BUFFER 0x0
-#define SERIAL_TRANS_HOLD 0x0
-#define SERIAL_SEND_BUFFER 0x0
-#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS)
-#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS)
-#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS)
-#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS)
-#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS)
-#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS)
-#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS)
-#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS)
-
-#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS)
-#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define SERIAL_READ(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs)))
-
-#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs)))
-
-#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
- /* Disable Interrupts */
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
- divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
- SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
- (divisor & 0xff00) >> 8);
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
- YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
- /* Enable Interrupts */
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
- unsigned char stop)
-{
- /* Disable Interrupts */
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
- divisor = TITAN_SERIAL_BASE_BAUD / baud;
- SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
- return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
- SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
- return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc28..5f673eb 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@
}
}
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
/*
* Initialize the next level interrupt handler
*/
@@ -156,11 +152,6 @@
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
-#ifdef CONFIG_KGDB
- /* At this point, initialize the second serial port */
- init_second_port();
-#endif
-
#ifdef CONFIG_GDB_CONSOLE
register_gdb_console();
#endif
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index b2fe82d..00a1c78 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -64,7 +64,8 @@
void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
{
- unsigned flags, data;
+ unsigned long flags;
+ unsigned data;
unsigned i = 0;
spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@
void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
{
- unsigned flags;
+ unsigned long flags;
spin_lock_irqsave(&dev3.lock, flags);
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index db74edf..8e7a468 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -49,8 +49,8 @@
void __init plat_time_init(void)
{
- unsigned int est_freq, flags;
- unsigned long r4k_offset;
+ unsigned int est_freq;
+ unsigned long flags, r4k_offset;
local_irq_save(flags);
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee..896a1ef 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/time.h>
-#include <asm/gdb-stub.h>
#include <asm/io.h>
#include <asm/traps.h>
#include <asm/sgialib.h>
@@ -81,30 +80,6 @@
add_preferred_console("arc", 0, NULL);
}
-#ifdef CONFIG_KGDB
- {
- char *kgdb_ttyd = prom_getcmdline();
-
- if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
- int line;
- kgdb_ttyd += strlen("kgdb=ttyd");
- if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
- printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
- ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
- line = *kgdb_ttyd == '2' ? 0 : 1;
- printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
- "session\n", line ? 1 : 2);
- rs_kgdb_hook(line);
-
- printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
- "session, please connect your debugger\n", line ? 1:2);
-
- kgdb_enabled = 1;
- /* Breakpoints and stuff are in sgi_irq_setup() */
- }
- }
-#endif
-
#if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
{
ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d..31f4931 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@
ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
-obj-$(CONFIG_KGDB) += ip27-dbgio.o
obj-$(CONFIG_SMP) += ip27-smp.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b..0000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK (22000000 / 3)
-#define IOC3_FLAGS (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
- struct ioc3 *ioc3;
-
- ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
- return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
- struct ioc3_uartregs *uart = console_uart();
-
- while ((uart->iu_lsr & UART_LSR_DR) == 0);
- return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
- struct ioc3_uartregs *uart = console_uart();
-
- while ((uart->iu_lsr & UART_LSR_THRE) == 0);
- uart->iu_thr = c;
-}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0..a35818e 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@
extern unsigned long ht_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
- kgdb_flag = 0;
- return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip bcm1480_irq_type = {
.name = "BCM1480-IMR",
.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- /* QQQ FIXME */
- __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
- (kgdb_irq << 3)));
- bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
- register_gdb_console();
-#endif
- printk("Waiting for GDB on UART port %d\n", kgdb_port);
- set_debug_traps();
- breakpoint();
- }
-#endif
}
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat.irqs[smp_processor_id()][kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
-}
-
-#endif /* CONFIG_KGDB */
-
extern void bcm1480_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@
bcm1480_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6)
- bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
}
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d..3de30f7 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@
extern unsigned long initrd_start, initrd_end;
#endif
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
static void __noreturn cfe_linux_exit(void *arg)
{
int warm = *(int *)arg;
@@ -246,9 +242,6 @@
int argc = fw_arg0;
char **envp = (char **) fw_arg2;
int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
- char *arg;
-#endif
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
@@ -309,13 +302,6 @@
}
}
-#ifdef CONFIG_KGDB
- if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
- kgdb_port = (arg[10] == '0') ? 0 : 1;
- else
- kgdb_port = 1;
-#endif
-
#ifdef CONFIG_BLK_DEV_INITRD
{
char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065..a515848 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@
extern unsigned long ldt_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip sb1250_irq_type = {
.name = "SB1250-IMR",
.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- __raw_writeq(M_DUART_IMR_BRK,
- IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_IMR_REGISTER(0,
- R_IMR_INTERRUPT_MAP_BASE) +
- (kgdb_irq << 3)));
- sb1250_unmask_irq(0, kgdb_irq);
- }
-#endif
}
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat_this_cpu.irqs[kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
-}
-
-#endif /* CONFIG_KGDB */
-
extern void sb1250_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@
sb1250_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
- sb1250_kgdb_interrupt();
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692..f18ba92 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o
-obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae30..0000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 115200, 8, N, 1.
- */
-
-#define BAUD_RATE 115200
-#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE)
-#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */
-#define PARITY V_DUART_PARITY_MODE_NONE /* or even */
-#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */
-
-static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
- duart_out(R_DUART_MODE_REG_1, data | parity);
- duart_out(R_DUART_MODE_REG_2, stop);
- duart_out(R_DUART_CLK_SEL, clk_divisor);
-
- duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
- duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
- return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6de4c5a..840fe75 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+ bool
+ select MACH_TXX9
+ select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+ bool
+ select MACH_TXX9
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+ bool
+ select DMA_NONCOHERENT
+ select SWAP_IO_SPACE
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
depends on MACH_TX39XX
@@ -24,68 +48,37 @@
config SOC_TX3927
bool
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_TXX9
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX39XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4927
bool
- select CEVT_R4K
- select CSRC_R4K
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4938
bool
- select CEVT_R4K
- select CSRC_R4K
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
- depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+ depends on PCI && MACH_TXX9
select I8259
config PICMG_PCI_BACKPLANE_DEFAULT
bool "Support for PICMG PCI Backplane"
- depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+ depends on PCI && MACH_TXX9
default y if !TOSHIBA_FPCIB0
if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9c12077..9bb34af 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
obj-y += setup.o
obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o
obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o
obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB) += dbgio.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c67..0000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
- return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
- return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 0000000..c683f59
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+ int i;
+
+ txx9_irq_init(TX3927_IRC_REG);
+ /* raise priority for timers, sio */
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+ for (i = 0; i < TX3927_NR_SIO; i++)
+ txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c..7b637a7 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@
{
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+ if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+ return NULL;
+ if (!strcmp(str, "picmg")) {
+ /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+ (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+ txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+ return NULL;
+ } else if (!strcmp(str, "nopicmg")) {
+ /* non-PICMG compliant backplane (TOSHIBA
+ RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+ txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+ return NULL;
+ } else if (!strncmp(str, "clk=", 4)) {
+ char *val = str + 4;
+ txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+ if (strcmp(val, "33") == 0)
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+ else if (strcmp(val, "66") == 0)
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+ else /* "auto" */
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+ return NULL;
+ } else if (!strncmp(str, "err=", 4)) {
+ if (!strcmp(str + 4, "panic"))
+ txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+ else if (!strcmp(str + 4, "ignore"))
+ txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+ return NULL;
+ }
+ return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 8c60c78..1bc57d0 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -20,9 +20,13 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
+#include <asm/reboot.h>
#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
#ifdef CONFIG_CPU_TX49XX
#include <asm/txx9/tx4938.h>
#endif
@@ -187,6 +191,117 @@
return &(arcs_cmdline[0]);
}
+static void __noreturn txx9_machine_halt(void)
+{
+ local_irq_disable();
+ clear_c0_status(ST0_IM);
+ while (1) {
+ if (cpu_wait) {
+ (*cpu_wait)();
+ if (cpu_has_counter) {
+ /*
+ * Clear counter interrupt while it
+ * breaks WAIT instruction even if
+ * masked.
+ */
+ write_c0_compare(0);
+ }
+ }
+ }
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+ struct resource res = {
+ .start = base,
+ .end = base + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ };
+ platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+ struct resource res[] = {
+ {
+ .start = base,
+ .end = base + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ platform_device_register_simple("spi_txx9", busid,
+ res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+ struct platform_device *pdev =
+ platform_device_alloc("tc35815-mac", id);
+ if (!pdev ||
+ platform_device_add_data(pdev, ethaddr, 6) ||
+ platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+ unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+ struct uart_port req;
+
+ memset(&req, 0, sizeof(req));
+ req.line = line;
+ req.iotype = UPIO_MEM;
+ req.membase = ioremap(baseaddr, 0x24);
+ req.mapbase = baseaddr;
+ req.irq = irq;
+ if (!nocts)
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ if (sclk) {
+ req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+ req.uartclk = sclk;
+ } else
+ req.uartclk = TXX9_IMCLK;
+ early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+ txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR 0x0c
+#define TXX9_SITFIFO 0x1c
+#define TXX9_SICISR_TXALS 0x00000002
+ while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+ TXX9_SICISR_TXALS))
+ ;
+ __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+ early_txx9_sio_port = ioremap(baseaddr, 0x24);
+ txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
/* wrappers */
void __init plat_mem_setup(void)
{
@@ -194,6 +309,15 @@
ioport_resource.end = ~0UL; /* no limit */
iomem_resource.start = 0;
iomem_resource.end = ~0UL; /* no limit */
+
+ /* fallback restart/halt routines */
+ _machine_restart = (void (*)(char *))txx9_machine_halt;
+ _machine_halt = txx9_machine_halt;
+ pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+ pcibios_plat_setup = txx9_pcibios_setup;
+#endif
txx9_board_vec->mem_setup();
}
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 0000000..7bd963d
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+ txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+ int i;
+ unsigned int conf;
+
+ /* don't enable - see errata */
+ txx9_ccfg_toeon = 0;
+ if (strstr(prom_getcmdline(), "toeon") != NULL)
+ txx9_ccfg_toeon = 1;
+
+ txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+ TX3927_REG_SIZE);
+
+ /* SDRAMC,ROMC are configured by PROM */
+ for (i = 0; i < 8; i++) {
+ if (!(tx3927_romcptr->cr[i] & 0x8))
+ continue; /* disabled */
+ txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+ txx9_ce_res[i].end =
+ txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+ request_resource(&iomem_resource, &txx9_ce_res[i]);
+ }
+
+ /* clocks */
+ txx9_gbus_clock = txx9_cpu_clock / 2;
+ /* change default value to udelay/mdelay take reasonable time */
+ loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+ /* CCFG */
+ /* enable Timeout BusError */
+ if (txx9_ccfg_toeon)
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+ /* clear BusErrorOnWrite flag */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+ if (read_c0_conf() & TX39_CONF_WBON)
+ /* Disable PCI snoop */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+ else
+ /* Enable PCI SNOOP - with write through only */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+ /* do reset on watchdog */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+ printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+ tx3927_ccfgptr->crir,
+ tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+ /* TMR */
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_tmr_init(TX3927_TMR_REG(i));
+
+ /* DMA */
+ tx3927_dmaptr->mcr = 0;
+ for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+ /* reset channel */
+ tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+ tx3927_dmaptr->ch[i].ccr = 0;
+ }
+ /* enable DMA */
+#ifdef __BIG_ENDIAN
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+ /* PIO */
+ __raw_writel(0, &tx3927_pioptr->maskcpu);
+ __raw_writel(0, &tx3927_pioptr->maskext);
+ txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+ conf = read_c0_conf();
+ if (!(conf & TX39_CONF_ICE))
+ printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+ if (!(conf & TX39_CONF_DCE))
+ printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+ else if (!(conf & TX39_CONF_WBON))
+ printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+ else if (!(conf & TX39_CONF_CWFON))
+ printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+ else
+ printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+ txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+ TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+ TXX9_IMCLK);
+ txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+ int i;
+
+ for (i = 0; i < 2; i++)
+ txx9_sio_init(TX3927_SIO_REG(i),
+ TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 89d6e28..f80d4b7 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_core.h>
#include <linux/param.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4927.h>
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
{
/* clear WatchDogReset (W1C) */
tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@
tx4927_ccfg_set(TX4927_CCFG_WR);
}
+void __init tx4927_wdt_init(void)
+{
+ txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
static struct resource tx4927_sdram_resource[4];
void __init tx4927_setup(void)
@@ -173,22 +177,12 @@
TXX9_IMCLK);
}
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
{
-#ifdef CONFIG_SERIAL_TXX9
int i;
- struct uart_port req;
- for (i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
- req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
- req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = TXX9_IMCLK;
- early_serial_txx9_setup(&req);
- }
-#endif /* CONFIG_SERIAL_TXX9 */
+ for (i = 0; i < 2; i++)
+ txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
}
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 317378d..f3040b9 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_core.h>
#include <linux/param.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4938.h>
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
{
/* clear WatchDogReset (W1C) */
tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@
tx4938_ccfg_set(TX4938_CCFG_WR);
}
+void __init tx4938_wdt_init(void)
+{
+ txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
static struct resource tx4938_sdram_resource[4];
static struct resource tx4938_sram_resource;
@@ -233,11 +237,9 @@
TXX9_IMCLK);
}
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
{
-#ifdef CONFIG_SERIAL_TXX9
int i;
- struct uart_port req;
unsigned int ch_mask = 0;
if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@
for (i = 0; i < 2; i++) {
if ((1 << i) & ch_mask)
continue;
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
- req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
- req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = TXX9_IMCLK;
- early_serial_txx9_setup(&req);
+ txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+ txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+ u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+ if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+ if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
}
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e4874..a2b2d62 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
#include <asm/io.h>
#include <asm/txx9/smsc_fdc37m81x.h>
-#define DEBUG
-
/* Common Registers */
#define SMSC_FDC37M81X_CONFIG_INDEX 0x00
#define SMSC_FDC37M81X_CONFIG_DATA 0x01
@@ -55,7 +53,7 @@
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
{
@@ -107,7 +105,8 @@
u8 chip_id;
if (g_smsc_fdc37m81x_base)
- printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+ printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+ __func__,
field, g_smsc_fdc37m81x_base);
g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@
if (chip_id == SMSC_FDC37M81X_CHIP_ID)
smsc_fdc37m81x_config_end();
else {
- printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+ printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
chip_id);
g_smsc_fdc37m81x_base = 0;
}
@@ -127,22 +126,23 @@
}
#ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
{
- printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+ printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+ key, dev, reg,
smsc_fdc37m81x_rd(reg));
}
void smsc_fdc37m81x_config_dump(void)
{
u8 orig;
- char *fname = "smsc_fdc37m81x_config_dump()";
+ const char *fname = __func__;
smsc_fdc37m81x_config_beg();
orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
- printk("%s: common\n", fname);
+ printk(KERN_INFO "%s: common\n", fname);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_DNUM);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_PMGT);
- printk("%s: keyboard\n", fname);
+ printk(KERN_INFO "%s: keyboard\n", fname);
smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c9..20d61ac 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
#
obj-y += prom.o irq.o setup.o
-obj-$(CONFIG_KGDB) += kgdb_io.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a1..6ec626c 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
@@ -46,13 +42,6 @@
#error JMR3927_IRQ_END > NR_IRQS
#endif
-static unsigned char irc_level[TX3927_NUM_IR] = {
- 5, 5, 5, 5, 5, 5, /* INT[5:0] */
- 7, 7, /* SIO */
- 5, 5, 5, 0, 0, /* DMA, PIO, PCI */
- 6, 6, 6 /* TMR */
-};
-
/*
* CP0_STATUS is a thread's resource (saved/restored on context switch).
* So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@
return irq;
}
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
- printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
- printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
- tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
- return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
- .handler = jmr3927_pcierr_interrupt,
- .mask = CPU_MASK_NONE,
- .name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+ .name = "jmr3927_ioc",
+ .ack = mask_irq_ioc,
+ .mask = mask_irq_ioc,
+ .mask_ack = mask_irq_ioc,
+ .unmask = unmask_irq_ioc,
};
-#endif
-
-static void __init jmr3927_irq_init(void);
void __init jmr3927_irq_setup(void)
{
+ int i;
+
txx9_irq_dispatch = jmr3927_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@
/* clear PCI Reset interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- jmr3927_irq_init();
+ tx3927_irq_init();
+ for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+ set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
/* setup IOC interrupt 1 (PCI, MODEM) */
set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
- setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
- /* enable all CPU interrupt bits. */
- set_c0_status(ST0_IM); /* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
- .name = "jmr3927_ioc",
- .ack = mask_irq_ioc,
- .mask = mask_irq_ioc,
- .mask_ack = mask_irq_ioc,
- .unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
- u32 i;
-
- txx9_irq_init(TX3927_IRC_REG);
- for (i = 0; i < TXx9_MAX_IR; i++)
- txx9_irq_set_pri(i, irc_level[i]);
- for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
- set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
}
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e..0000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT 0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
- int i = 0;
-
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(38400);
- }
-
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(0)->tfifo = c;
-
- return 1;
-}
-
-unsigned char getDebugChar(void)
-{
- int i = 0;
- int dicr;
- char c;
-
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(38400);
- }
-
- /* diable RX int. */
- dicr = tx3927_sioptr(0)->dicr;
- tx3927_sioptr(0)->dicr = 0;
-
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
- ;
- c = tx3927_sioptr(0)->rfifo;
-
- /* clear RX int. status */
- tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
- /* enable RX int. */
- tx3927_sioptr(0)->dicr = dicr;
-
- return c;
-}
-
-static void debugInit(int baud)
-{
- tx3927_sioptr(0)->lcr = 0x020;
- tx3927_sioptr(0)->dicr = 0;
- tx3927_sioptr(0)->disr = 0x4100;
- tx3927_sioptr(0)->cisr = 0x014;
- tx3927_sioptr(0)->fcr = 0;
- tx3927_sioptr(0)->flcr = 0x02;
- tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
- TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb42..70c4c8e 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
-#define TIMEOUT 0xffffff
-
-void
-prom_putchar(char c)
-{
- int i = 0;
-
- do {
- i++;
- if (i>TIMEOUT)
- break;
- } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(1)->tfifo = c;
- return;
-}
-
-void
-puts(const char *cp)
-{
- while (*cp)
- prom_putchar(*cp++);
- prom_putchar('\r');
- prom_putchar('\n');
-}
-
void __init jmr3927_prom_init(void)
{
/* CCFG */
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
- puts("Warning: TX3927 TLB off\n");
+ printk(KERN_ERR "TX3927 TLB off\n");
prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX3927_SIO_REG(1));
}
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 03647eb..87db41b 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
#include <asm/reboot.h>
+#include <asm/txx9pio.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
{
+ local_irq_disable();
#if 1 /* Resetting PCI bus */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
#endif
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
- local_irq_disable();
- puts("Rebooting...");
- do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
- puts("JMR-TX3927 halted.\n");
- while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
- puts("JMR-TX3927 halted. Please turn off the power.\n");
- while (1);
+ /* fallback */
+ (*_machine_halt)();
}
static void __init jmr3927_time_init(void)
{
- txx9_clockevent_init(TX3927_TMR_REG(0),
- TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
- JMR3927_IMCLK);
- txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+ tx3927_time_init(0, 1);
}
#define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
- _machine_halt = jmr3927_machine_halt;
- pm_power_off = jmr3927_machine_power_off;
-
- /* Reboot on panic */
- panic_timeout = 180;
/* cache setup */
{
@@ -125,7 +91,8 @@
#endif
conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+ conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+ TX39_CONF_WBON | TX39_CONF_CWFON);
conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@
/* initialize board */
jmr3927_board_init();
- argptr = prom_getcmdline();
-
- if ((argptr = strstr(argptr, "toeon")) != NULL)
- jmr3927_ccfg_toeon = 1;
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "ip=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " ip=bootp");
- }
-
-#ifdef CONFIG_SERIAL_TXX9
- {
- extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
- struct uart_port req;
- for(i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
- req.mapbase = TX3927_SIO_REG(i);
- req.irq = i == 0 ?
- JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
- if (i == 0)
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = JMR3927_IMCLK;
- early_serial_txx9_setup(&req);
- }
- }
+ tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS1,115200");
- }
-#endif
#endif
}
-static void tx3927_setup(void);
-
static void __init jmr3927_pci_setup(void)
{
#ifdef CONFIG_PCI
@@ -199,32 +133,13 @@
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
}
tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+ tx3927_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
static void __init jmr3927_board_init(void)
{
- tx3927_setup();
- jmr3927_pci_setup();
-
- /* SIO0 DTR on */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
- jmr3927_led_set(0);
-
- printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
- jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
- jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_dipsw1(), jmr3927_dipsw2(),
- jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
- int i;
-
txx9_cpu_clock = JMR3927_CORECLK;
- txx9_gbus_clock = JMR3927_GBUSCLK;
/* SDRAMC are configured by PROM */
/* ROMC */
@@ -233,74 +148,32 @@
tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
- /* CCFG */
- /* enable Timeout BusError */
- if (jmr3927_ccfg_toeon)
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
- /* clear BusErrorOnWrite flag */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
- /* Disable PCI snoop */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
- /* do reset on watchdog */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
- /* Enable PCI SNOOP - with write through only */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
/* Pin selection */
tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
tx3927_ccfgptr->pcfg |=
TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
- printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
- tx3927_ccfgptr->crir,
- tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+ tx3927_setup();
- /* TMR */
- for (i = 0; i < TX3927_NR_TMR; i++)
- txx9_tmr_init(TX3927_TMR_REG(i));
-
- /* DMA */
- tx3927_dmaptr->mcr = 0;
- for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
- /* reset channel */
- tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
- tx3927_dmaptr->ch[i].ccr = 0;
- }
- /* enable DMA */
-#ifdef __BIG_ENDIAN
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
-
- /* PIO */
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- __raw_writel(0, &tx3927_pioptr->maskcpu);
- __raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
gpio_request(11, "dipsw1");
gpio_request(10, "dipsw2");
- {
- unsigned int conf;
- conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk("TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk("TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk("TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk("TX3927 D-Cache WriteBack.\n");
- else
- printk("TX3927 D-Cache WriteBack (CWF) .\n");
- }
+ jmr3927_pci_setup();
+
+ /* SIO0 DTR on */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+ jmr3927_led_set(0);
+
+ printk(KERN_INFO
+ "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+ jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_dipsw1(), jmr3927_dipsw2(),
+ jmr3927_dipsw3(), jmr3927_dipsw4());
}
/* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@
#endif
}
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
{
static struct resource __initdata res = {
.start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
.end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev;
- dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
- return txx9_wdt_init(TX3927_TMR_REG(2));
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
static void __init jmr3927_device_init(void)
{
__swizzle_addr_b = jmr3927_swizzle_addr_b;
jmr3927_rtc_init();
- jmr3927_wdt_init();
+ tx3927_wdt_init();
}
struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index cd748a9..00cd523 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
-IRQ Device
-00 RBTX4927-ISA/00
-01 RBTX4927-ISA/01 PS2/Keyboard
-02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03 RBTX4927-ISA/03
-04 RBTX4927-ISA/04
-05 RBTX4927-ISA/05
-06 RBTX4927-ISA/06
-07 RBTX4927-ISA/07
-08 RBTX4927-ISA/08
-09 RBTX4927-ISA/09
-10 RBTX4927-ISA/10
-11 RBTX4927-ISA/11
-12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13 RBTX4927-ISA/13
-14 RBTX4927-ISA/14 IDE
-15 RBTX4927-ISA/15
-
-16 TX4927-CP0/00 Software 0
-17 TX4927-CP0/01 Software 1
-18 TX4927-CP0/02 Cascade TX4927-CP0
-19 TX4927-CP0/03 Multiplexed -- do not use
-20 TX4927-CP0/04 Multiplexed -- do not use
-21 TX4927-CP0/05 Multiplexed -- do not use
-22 TX4927-CP0/06 Multiplexed -- do not use
-23 TX4927-CP0/07 CPU TIMER
-
-24 TX4927-PIC/00
-25 TX4927-PIC/01
-26 TX4927-PIC/02
-27 TX4927-PIC/03 Cascade RBTX4927-IOC
-28 TX4927-PIC/04
-29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30 TX4927-PIC/06
-31 TX4927-PIC/07
-32 TX4927-PIC/08 TX4927 SerialIO Channel 0
-33 TX4927-PIC/09 TX4927 SerialIO Channel 1
-34 TX4927-PIC/10
-35 TX4927-PIC/11
-36 TX4927-PIC/12
-37 TX4927-PIC/13
-38 TX4927-PIC/14
-39 TX4927-PIC/15
-40 TX4927-PIC/16 TX4927 PCI PCI-C
-41 TX4927-PIC/17
-42 TX4927-PIC/18
-43 TX4927-PIC/19
-44 TX4927-PIC/20
-45 TX4927-PIC/21
-46 TX4927-PIC/22 TX4927 PCI PCI-ERR
-47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48 TX4927-PIC/24
-49 TX4927-PIC/25
-50 TX4927-PIC/26
-51 TX4927-PIC/27
-52 TX4927-PIC/28
-53 TX4927-PIC/29
-54 TX4927-PIC/30
-55 TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
#include <linux/init.h>
#include <linux/types.h>
@@ -134,7 +135,7 @@
level3 = readb(rbtx4927_imstat_addr) & 0x1f;
if (level3)
sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
- return (sw_irq);
+ return sw_irq;
}
static void __init toshiba_rbtx4927_irq_ioc_init(void)
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 5c0de54..1dc0a5b 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -38,4 +38,5 @@
{
prom_init_cmdline();
add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3da20ea..0d39baf 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,12 +46,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/io.h>
-#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@
tx4927_report_pciclk();
tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
}
+ tx4927_setup_pcierr_irq();
}
static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
}
+ tx4938_setup_pcierr_irq();
}
static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@
#define rbtx4937_arch_init NULL
#endif /* CONFIG_PCI */
-static void __noreturn wait_forever(void)
-{
- while (1)
- if (cpu_wait)
- (*cpu_wait)();
-}
-
static void toshiba_rbtx4927_restart(char *command)
{
- printk(KERN_NOTICE "System Rebooting...\n");
-
/* enable the s/w reset register */
writeb(1, rbtx4927_softresetlock_addr);
@@ -186,24 +176,8 @@
/* do a s/w reset */
writeb(1, rbtx4927_softreset_addr);
- /* do something passive while waiting for reset */
- local_irq_disable();
- wait_forever();
- /* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
- printk(KERN_NOTICE "System Halted\n");
- local_irq_disable();
- wait_forever();
- /* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
- toshiba_rbtx4927_halt();
- /* no return */
+ /* fallback */
+ (*_machine_halt)();
}
static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@
u32 cp0_config;
char *argptr;
- /* f/w leaves this on at startup */
- clear_c0_status(ST0_ERL);
-
/* enable caches -- HCP5 does this, pmon does not */
cp0_config = read_c0_config();
cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@
}
_machine_restart = toshiba_rbtx4927_restart;
- _machine_halt = toshiba_rbtx4927_halt;
- pm_power_off = toshiba_rbtx4927_power_off;
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic,
RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
- tx4927_setup_serial();
+ tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
- argptr = prom_getcmdline();
- if (strstr(argptr, "root=") == NULL) {
- strcat(argptr, " root=/dev/nfs rw");
- }
-#endif
-
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
}
@@ -324,19 +279,17 @@
tx4927_time_init(0);
}
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
{
struct resource res = {
.start = RBTX4927_BRAMRTC_BASE - IO_BASE,
.end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev =
- platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
{
struct resource res[] = {
{
@@ -348,36 +301,14 @@
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
- return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
rbtx4927_ne_init();
- rbtx4927_wdt_init();
+ tx4927_wdt_init();
}
struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a06..ca2f830 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
*/
/*
-IRQ Device
-
-16 TX4938-CP0/00 Software 0
-17 TX4938-CP0/01 Software 1
-18 TX4938-CP0/02 Cascade TX4938-CP0
-19 TX4938-CP0/03 Multiplexed -- do not use
-20 TX4938-CP0/04 Multiplexed -- do not use
-21 TX4938-CP0/05 Multiplexed -- do not use
-22 TX4938-CP0/06 Multiplexed -- do not use
-23 TX4938-CP0/07 CPU TIMER
-
-24 TX4938-PIC/00
-25 TX4938-PIC/01
-26 TX4938-PIC/02 Cascade RBTX4938-IOC
-27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28 TX4938-PIC/04
-29 TX4938-PIC/05 TX4938 ETH1
-30 TX4938-PIC/06 TX4938 ETH0
-31 TX4938-PIC/07
-32 TX4938-PIC/08 TX4938 SIO 0
-33 TX4938-PIC/09 TX4938 SIO 1
-34 TX4938-PIC/10 TX4938 DMA0
-35 TX4938-PIC/11 TX4938 DMA1
-36 TX4938-PIC/12 TX4938 DMA2
-37 TX4938-PIC/13 TX4938 DMA3
-38 TX4938-PIC/14
-39 TX4938-PIC/15
-40 TX4938-PIC/16 TX4938 PCIC
-41 TX4938-PIC/17 TX4938 TMR0
-42 TX4938-PIC/18 TX4938 TMR1
-43 TX4938-PIC/19 TX4938 TMR2
-44 TX4938-PIC/20
-45 TX4938-PIC/21
-46 TX4938-PIC/22 TX4938 PCIERR
-47 TX4938-PIC/23
-48 TX4938-PIC/24
-49 TX4938-PIC/25
-50 TX4938-PIC/26
-51 TX4938-PIC/27
-52 TX4938-PIC/28
-53 TX4938-PIC/29
-54 TX4938-PIC/30
-55 TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsregs.h>
@@ -93,9 +91,6 @@
return sw_irq;
}
-/**********************************************************************************/
-/* Functions for ioc */
-/**********************************************************************************/
static void __init
toshiba_rbtx4938_irq_ioc_init(void)
{
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee18951..d73123c 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -22,4 +22,5 @@
prom_init_cmdline();
#endif
add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99b..9ab48de 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,9 +13,6 @@
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
@@ -28,33 +25,14 @@
#include <asm/txx9/spi.h>
#include <asm/txx9pio.h>
-static void rbtx4938_machine_halt(void)
-{
- printk(KERN_NOTICE "System Halted\n");
- local_irq_disable();
-
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
- rbtx4938_machine_halt();
- /* no return */
-}
-
static void rbtx4938_machine_restart(char *command)
{
local_irq_disable();
-
- printk("Rebooting...");
writeb(1, rbtx4938_softresetlock_addr);
writeb(1, rbtx4938_sfvol_addr);
writeb(1, rbtx4938_softreset_addr);
- while(1)
- ;
+ /* fallback */
+ (*_machine_halt)();
}
static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@
register_pci_controller(c);
tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
}
+ tx4938_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
@@ -151,19 +130,7 @@
if (sum)
printk(KERN_WARNING "seeprom: bad checksum.\n");
}
- for (i = 0; i < 2; i++) {
- unsigned int id =
- TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
- struct platform_device *pdev;
- if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
- (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
- continue;
- pdev = platform_device_alloc("tc35815-mac", id);
- if (!pdev ||
- platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
- platform_device_add(pdev))
- platform_device_put(pdev);
- }
+ tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
#endif /* CONFIG_PCI */
return 0;
}
@@ -193,51 +160,36 @@
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4938_ETHER_BASE);
#endif
- tx4938_setup_serial();
+ tx4938_sio_init(7372800, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk("PIOSEL: disabling both ata and nand selection\n");
- local_irq_disable();
+ printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk("PIOSEL: enabling nand selection\n");
+ printk(KERN_INFO "PIOSEL: enabling nand selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk("PIOSEL: enabling ata selection\n");
+ printk(KERN_INFO "PIOSEL: enabling ata selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
-#endif
-
-
-#ifdef CONFIG_FB
- {
- conswitchp = &dummy_con;
- }
-#endif
-
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
@@ -258,11 +210,9 @@
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
- printk("request resource for fpga failed\n");
+ printk(KERN_ERR "request resource for fpga failed\n");
_machine_restart = rbtx4938_machine_restart;
- _machine_halt = rbtx4938_machine_halt;
- pm_power_off = rbtx4938_machine_power_off;
writeb(0xff, rbtx4938_led_addr);
printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@
readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
}
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
{
struct resource res[] = {
{
@@ -282,10 +232,7 @@
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@
.ngpio = 3,
};
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
- struct resource res[] = {
- {
- .start = base,
- .end = base + 0x20 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- platform_device_register_simple("spi_txx9", 0,
- res, ARRAY_SIZE(res));
-}
-
static int __init rbtx4938_spi_init(void)
{
struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
- txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+ tx4938_spi_init(0);
return 0;
}
@@ -372,30 +301,11 @@
rbtx4938_spi_init();
}
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
- return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
static void __init rbtx4938_device_init(void)
{
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
- rbtx4938_wdt_init();
+ tx4938_wdt_init();
}
struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..63c9caf 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@
bool
default y
+config HAVE_GET_USER_PAGES_FAST
+ def_bool PPC64
+
config HAVE_SETUP_PER_CPU_AREA
def_bool PPC64
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743..fbc9304 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045..b157d18 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab56..700e076 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca349..cdd3063 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb..783241c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae..a3b76a7 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6..89c9202 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
};
crypto@30000 {
- compatible = "fsl,sec2-crypto";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <11 8>;
+ interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x7e>;
- /*
- * desc mask is for rev1.x, we need runtime fixup
- * for >=2.x
- */
- descriptor-types-mask = <0x1010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb..432782b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76..ed32c8d 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a89..f4db9ed 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24..1505d68 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
reg = <0xffe00000 0x1000>;
bus-frequency = <0>; // Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a8..9568bfa 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x100000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f1..6480f4f 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d..f1fb207 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466b..431b496 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a780..d833a5c 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159d..4d1f2f2 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x200>;
bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34..a15f103 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3..e124dd1 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
+ compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 9f856a0..1a09719 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -636,10 +636,6 @@
retval = -EIO;
} else if (retval == H_PARAMETER) {
retval = -EINVAL;
- } else {
- printk(KERN_WARNING "%s: received unknown hv return code %ld",
- __func__, retval);
- retval = -EIO;
}
return retval;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 6b66cd8..3635be6 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -375,7 +375,7 @@
flush_vsx_to_thread(target);
for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+ buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
@@ -394,7 +394,7 @@
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
buf, 0, 32 * sizeof(double));
for (i = 0; i < 32 ; i++)
- current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+ target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
return ret;
@@ -975,15 +975,13 @@
case PTRACE_GETVSRREGS:
return copy_regset_to_user(child, &user_ppc_native_view,
REGSET_VSX,
- 0, (32 * sizeof(vector128) +
- sizeof(u32)),
+ 0, 32 * sizeof(double),
(void __user *) data);
case PTRACE_SETVSRREGS:
return copy_regset_from_user(child, &user_ppc_native_view,
REGSET_VSX,
- 0, (32 * sizeof(vector128) +
- sizeof(u32)),
+ 0, 32 * sizeof(double),
(const void __user *) data);
#endif
#ifdef CONFIG_SPE
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1..197d49c 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@
case PTRACE_SETFPREGS:
case PTRACE_GETVRREGS:
case PTRACE_SETVRREGS:
+ case PTRACE_GETVSRREGS:
+ case PTRACE_SETVSRREGS:
case PTRACE_GETREGS64:
case PTRACE_SETREGS64:
case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e01..e7392b4 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@
mmu_context_$(CONFIG_WORD_SIZE).o
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
- slb_low.o slb.o stab.o mmap.o $(hash-y)
+ slb_low.o slb.o stab.o \
+ gup.o mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 0000000..9fdf4d6
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr)
+{
+ unsigned long mask, result;
+ pte_t *ptep;
+
+ result = _PAGE_PRESENT|_PAGE_USER;
+ if (write)
+ result |= _PAGE_RW;
+ mask = result | _PAGE_SPECIAL;
+
+ ptep = pte_offset_kernel(&pmd, addr);
+ do {
+ pte_t pte = *ptep;
+ struct page *page;
+
+ if ((pte_val(pte) & mask) != result)
+ return 0;
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+ page = pte_page(pte);
+ if (!page_cache_get_speculative(page))
+ return 0;
+ if (unlikely(pte != *ptep)) {
+ put_page(page);
+ return 0;
+ }
+ pages[*nr] = page;
+ (*nr)++;
+
+ } while (ptep++, addr += PAGE_SIZE, addr != end);
+
+ return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+ unsigned long *addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long mask;
+ unsigned long pte_end;
+ struct page *head, *page;
+ pte_t pte;
+ int refs;
+
+ pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+ if (pte_end < end)
+ end = pte_end;
+
+ pte = *ptep;
+ mask = _PAGE_PRESENT|_PAGE_USER;
+ if (write)
+ mask |= _PAGE_RW;
+ if ((pte_val(pte) & mask) != mask)
+ return 0;
+ /* hugepages are never "special" */
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+ refs = 0;
+ head = pte_page(pte);
+ page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+ do {
+ VM_BUG_ON(compound_head(page) != head);
+ pages[*nr] = page;
+ (*nr)++;
+ page++;
+ refs++;
+ } while (*addr += PAGE_SIZE, *addr != end);
+
+ if (!page_cache_add_speculative(head, refs)) {
+ *nr -= refs;
+ return 0;
+ }
+ if (unlikely(pte != *ptep)) {
+ /* Could be optimized better */
+ while (*nr) {
+ put_page(page);
+ (*nr)--;
+ }
+ }
+
+ return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pmd_t *pmdp;
+
+ pmdp = pmd_offset(&pud, addr);
+ do {
+ pmd_t pmd = *pmdp;
+
+ next = pmd_addr_end(addr, end);
+ if (pmd_none(pmd))
+ return 0;
+ if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ return 0;
+ } while (pmdp++, addr = next, addr != end);
+
+ return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pud_t *pudp;
+
+ pudp = pud_offset(&pgd, addr);
+ do {
+ pud_t pud = *pudp;
+
+ next = pud_addr_end(addr, end);
+ if (pud_none(pud))
+ return 0;
+ if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+ return 0;
+ } while (pudp++, addr = next, addr != end);
+
+ return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr, len, end;
+ unsigned long next;
+ pgd_t *pgdp;
+ int psize, nr = 0;
+ unsigned int shift;
+
+ pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+ start &= PAGE_MASK;
+ addr = start;
+ len = (unsigned long) nr_pages << PAGE_SHIFT;
+ end = start + len;
+
+ if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+ start, len)))
+ goto slow_irqon;
+
+ pr_debug(" aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+ /* We bail out on slice boundary crossing when hugetlb is
+ * enabled in order to not have to deal with two different
+ * page table formats
+ */
+ if (addr < SLICE_LOW_TOP) {
+ if (end > SLICE_LOW_TOP)
+ goto slow_irqon;
+
+ if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+ GET_LOW_SLICE_INDEX(end - 1)))
+ goto slow_irqon;
+ } else {
+ if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+ GET_HIGH_SLICE_INDEX(end - 1)))
+ goto slow_irqon;
+ }
+#endif /* CONFIG_HUGETLB_PAGE */
+
+ /*
+ * XXX: batch / limit 'nr', to avoid large irq off latency
+ * needs some instrumenting to determine the common sizes used by
+ * important workloads (eg. DB2), and whether limiting the batch size
+ * will decrease performance.
+ *
+ * It seems like we're in the clear for the moment. Direct-IO is
+ * the main guy that batches up lots of get_user_pages, and even
+ * they are limited to 64-at-a-time which is not so many.
+ */
+ /*
+ * This doesn't prevent pagetable teardown, but does prevent
+ * the pagetables from being freed on powerpc.
+ *
+ * So long as we atomically load page table pointers versus teardown,
+ * we can follow the address down to the the page and take a ref on it.
+ */
+ local_irq_disable();
+
+ psize = get_slice_psize(mm, addr);
+ shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+ if (unlikely(mmu_huge_psizes[psize])) {
+ pte_t *ptep;
+ unsigned long a = addr;
+ unsigned long sz = ((1UL) << shift);
+ struct hstate *hstate = size_to_hstate(sz);
+
+ BUG_ON(!hstate);
+ /*
+ * XXX: could be optimized to avoid hstate
+ * lookup entirely (just use shift)
+ */
+
+ do {
+ VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+ ptep = huge_pte_offset(mm, a);
+ pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+ &nr))
+ goto slow;
+ } while (a != end);
+ } else
+#endif /* CONFIG_HUGETLB_PAGE */
+ {
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = *pgdp;
+
+ VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+ pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd);
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ goto slow;
+ if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ goto slow;
+ } while (pgdp++, addr = next, addr != end);
+ }
+ local_irq_enable();
+
+ VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+ return nr;
+
+ {
+ int ret;
+
+slow:
+ local_irq_enable();
+slow_irqon:
+ pr_debug(" slow path ! nr = %d\n", nr);
+
+ /* Try to get the remaining pages with get_user_pages */
+ start += nr << PAGE_SHIFT;
+ pages += nr;
+
+ down_read(&mm->mmap_sem);
+ ret = get_user_pages(current, mm, start,
+ (end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+ up_read(&mm->mmap_sem);
+
+ /* Have to be a bit careful with return values */
+ if (nr > 0) {
+ if (ret < 0)
+ ret = nr;
+ else
+ ret += nr;
+ }
+
+ return ret;
+ }
+}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4a..ec43477 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d69..0300268 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77..76092d3 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509a..fc3f2ed 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@
static struct of_device_id mpc834x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e8..9d46e5b 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@
static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c..156c4e2 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@
static struct __initdata of_device_id sbc834x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145ade..8a3b117 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@
static struct of_device_id __initdata of_bus_ids[] = {
{ .type = "soc", },
+ { .type = "simple-bus", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa..1bf5aef 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@
static struct of_device_id __initdata mpc8536_ds_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6..d17807a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@
{ .type = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c5358..483b65c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@
static struct of_device_id __initdata mpc85xxds_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f..2494c51 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd..6509ade 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@
{ .type = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e..71d7562 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@
If in doubt, say Y here.
+config 8xx_GPIO
+ bool "GPIO API Support"
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Saying Y here will cause the ports on an MPC8xx processor to be used
+ with the GPIO API. If you say N here, the kernel needs less memory.
+
+ If in doubt, say Y here.
+
config 8xx_CPU6
bool "CPU6 Silicon Errata (860 Pre Rev. C)"
help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d09687..4c900ef 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@
select CPM
select PPC_LIB_RHEAP
select PPC_PCI_CHOICE
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
help
The CPM2 (Communications Processor Module) is a coprocessor on
embedded CPUs made by Freescale. Selecting this option means that
@@ -281,6 +283,7 @@
config CPM
bool
+ select PPC_CLOCK
config OF_RTC
bool
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f6..3233fe8 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@
struct cpufreq_frequency_table *cbe_freqs;
u8 node;
+ /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+ * and CPUFREQ_NOTIFY policy events?)
+ */
+ if (event == CPUFREQ_START)
+ return 0;
+
cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
node = cbe_cpu_to_node(policy->cpu);
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42..4a04823 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/spinlock.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
#include <asm/fs_pd.h>
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
#define CPM_MAP_SIZE (0x4000)
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
@@ -290,20 +295,24 @@
__be16 res[3];
};
-struct cpm_ioport32 {
- __be32 dir, par, sor;
+struct cpm_ioport32b {
+ __be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+ __be32 dir, par, sor, odr, dat;
};
static void cpm1_set_pin32(int port, int pin, int flags)
{
- struct cpm_ioport32 __iomem *iop;
+ struct cpm_ioport32e __iomem *iop;
pin = 1 << (31 - pin);
if (port == CPM_PORTB)
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pbdir;
else
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pedir;
if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@
return 0;
}
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u16 pin_mask = 1 << (15 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be16(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ setbits16(&iop->dir, pin_mask);
+
+ cpm1_gpio16_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ clrbits16(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+ struct cpm1_gpio16_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio16_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 16;
+ gc->direction_input = cpm1_gpio16_dir_in;
+ gc->direction_output = cpm1_gpio16_dir_out;
+ gc->get = cpm1_gpio16_get;
+ gc->set = cpm1_gpio16_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ setbits32(&iop->dir, pin_mask);
+
+ cpm1_gpio32_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ clrbits32(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+ struct cpm1_gpio32_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio32_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = cpm1_gpio32_dir_in;
+ gc->direction_output = cpm1_gpio32_dir_out;
+ gc->get = cpm1_gpio32_get;
+ gc->set = cpm1_gpio32_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+ cpm1_gpiochip_add16(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+ cpm1_gpiochip_add32(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+ cpm1_gpiochip_add16(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+ cpm1_gpiochip_add16(np);
+
+ /* Port E uses CPM2 layout */
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+ cpm2_gpiochip_add32(np);
+ return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5df..f1c3395 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK (get_brgfreq())
-#define BRG_UART_CLK (BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
{
u32 __iomem *bp;
+ u32 val;
/* This is good enough to get SMCs running.....
*/
@@ -135,34 +129,14 @@
brg -= 4;
}
bp += brg;
- out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
- cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
- u32 __iomem *bp;
- u32 val;
-
- if (brg < 4) {
- bp = cpm2_map_size(im_brgc1, 16);
- } else {
- bp = cpm2_map_size(im_brgc5, 16);
- brg -= 4;
- }
- bp += brg;
- val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+ val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
if (div16)
val |= CPM_BRG_DIV16;
out_be32(bp, val);
cpm2_unmap(bp);
}
+EXPORT_SYMBOL(__cpm2_setbrg);
int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
{
@@ -377,3 +351,14 @@
else
clrbits32(&iop[port].odr, pin);
}
+
+static int cpm_init_par_io(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+ cpm2_gpiochip_add32(np);
+ return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296..53da8a0 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
#include <asm/udbg.h>
#include <asm/io.h>
@@ -28,6 +30,10 @@
#include <mm/mmu_decl.h>
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
static u32 __iomem *cpm_udbg_txdesc =
(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,120 @@
return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
}
EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+ u32 dir, par, sor, odr, dat;
+ u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+ cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+ if (value)
+ cpm2_gc->cpdata |= pin_mask;
+ else
+ cpm2_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm2_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ setbits32(&iop->dir, pin_mask);
+
+ cpm2_gpio32_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm2_ioports __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ clrbits32(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+ struct cpm2_gpio32_chip *cpm2_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+ if (!cpm2_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm2_gc->lock);
+
+ mm_gc = &cpm2_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm2_gpio32_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = cpm2_gpio32_dir_in;
+ gc->direction_output = cpm2_gpio32_dir_out;
+ gc->get = cpm2_gpio32_get;
+ gc->set = cpm2_gpio32_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0..c1879eb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@
struct device_node *np;
struct platform_device *pd;
struct resource res[2];
+ unsigned int num_res = 1;
int ret;
memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@
if (res[0].start != RTC_PORT(0))
return -EINVAL;
- /* Use a fixed interrupt value of 8 since on PPC if we are using this
- * its off an i8259 which we ensure has interrupt numbers 0..15. */
- res[1].start = 8;
- res[1].end = 8;
- res[1].flags = IORESOURCE_IRQ;
+ np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+ if (np) {
+ of_node_put(np);
+ /*
+ * Use a fixed interrupt value of 8 since on PPC if we are
+ * using this its off an i8259 which we ensure has interrupt
+ * numbers 0..15.
+ */
+ res[1].start = 8;
+ res[1].end = 8;
+ res[1].flags = IORESOURCE_IRQ;
+ num_res++;
+ }
pd = platform_device_register_simple("rtc_cmos", -1,
- &res[0], 2);
+ &res[0], num_res);
if (IS_ERR(pd))
return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ed8812..8d41908 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@
def_bool y
depends on SPARSEMEM
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+
source "mm/Kconfig"
comment "I/O subsystem configuration"
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e..328a20e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@
lgfr %r2,%r2 # int
llgtr %r3,%r3 # struct compat_itimerspec *
jg compat_sys_timerfd_gettime
+
+ .globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # compat_sigset_t *
+ llgfr %r4,%r4 # compat_size_t
+ lgfr %r5,%r5 # int
+ jg compat_sys_signalfd4
+
+ .globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ lgfr %r3,%r3 # int
+ jg sys_eventfd2
+
+ .globl sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+ lgfr %r2,%r2 # int
+ jg sys_inotify_init1
+
+ .globl sys_pipe2_wrapper
+sys_pipe2_wrapper:
+ llgtr %r2,%r2 # u32 *
+ lgfr %r3,%r3 # int
+ jg sys_pipe2 # branch to system call
+
+ .globl sys_dup3_wrapper
+sys_dup3_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgfr %r3,%r3 # unsigned int
+ lgfr %r4,%r4 # int
+ jg sys_dup3 # branch to system call
+
+ .globl sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+ lgfr %r2,%r2 # int
+ jg sys_epoll_create1 # branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779..2dcf590 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@
void __init ipl_update_parameters(void)
{
- if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+ int rc;
+
+ rc = diag308(DIAG308_STORE, &ipl_block);
+ if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
diag308_set_works = 1;
}
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7ab..9872999 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
#include <asm/sclp.h>
#include <asm/setup.h>
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
- unsigned long val0 = 0;
- unsigned long val1 = 0xc;
- int rc = -EOPNOTSUPP;
-
- if (ipl_flags & IPL_NSS_VALID)
- return -EOPNOTSUPP;
- asm volatile(
- " diag %1,%2,0x260\n"
- "0: lhi %0,0\n"
- "1:\n"
- EX_TABLE(0b,1b)
- : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
- if (rc || val0 != val1)
- return -EOPNOTSUPP;
- chunk->size = val0 + 1;
- return 0;
-}
-
static inline int tprot(unsigned long addr)
{
int rc = -EFAULT;
@@ -84,8 +63,6 @@
unsigned long flags, cr0;
memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
- if (memory_fast_detect(&chunk[0]) == 0)
- return;
/* Disable IRQs, DAT and low address protection so tprot does the
* right thing and we don't get scheduled away with low address
* protection disabled.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec68..c66d35e 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@
SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ab70d9b..ca114fe 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1348,7 +1348,7 @@
/*
* Reset STP attachment.
*/
-static void stp_reset(void)
+static void __init stp_reset(void)
{
int rc;
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8..fc6ab60 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@
local_bh_disable();
local_irq_save(flags);
if (raw_irqs_disabled_flags(flags)) {
- old_cc = S390_lowcore.clock_comparator;
+ old_cc = local_tick_disable();
S390_lowcore.clock_comparator = -1ULL;
__ctl_store(cr0, 0, 0);
dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@
if (raw_irqs_disabled_flags(flags)) {
__ctl_load(cr0, 0, 0);
- S390_lowcore.clock_comparator = old_cc;
+ local_tick_enable(old_cc);
}
if (!irq_context)
_local_bh_enable();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 4993b0f..1169130 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -179,7 +179,7 @@
int rc;
pgdat = NODE_DATA(nid);
- zone = pgdat->node_zones + ZONE_NORMAL;
+ zone = pgdat->node_zones + ZONE_MOVABLE;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
@@ -189,3 +189,14 @@
return rc;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = PFN_DOWN(start);
+ end_pfn = start_pfn + PFN_DOWN(size);
+ return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0b88dc4..cb992c3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -24,6 +24,11 @@
config SUPERH64
def_bool y if CPU_SH5
+config ARCH_DEFCONFIG
+ string
+ default "arch/sh/configs/shx3_defconfig" if SUPERH32
+ default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
config RWSEM_GENERIC_SPINLOCK
def_bool y
@@ -348,253 +353,10 @@
endchoice
source "arch/sh/mm/Kconfig"
+
source "arch/sh/Kconfig.cpu"
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK7203
- bool "RSK7203"
- depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
- bool "Hitachi Cayman"
- depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/renesas/migor/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c627e45..25659ce 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@
defaultimage-$(CONFIG_SUPERH32) := zImage
# Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG := r7780mp_defconfig
+KBUILD_DEFCONFIG := shx3_defconfig
KBUILD_IMAGE := $(defaultimage-y)
#
@@ -91,51 +91,34 @@
LDFLAGS += -EB
endif
-KBUILD_CFLAGS += -pipe $(cflags-y)
-KBUILD_AFLAGS += $(cflags-y)
-
head-y := arch/sh/kernel/init_task.o
head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o
head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-core-y += arch/sh/kernel/ arch/sh/mm/
+core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
-machdir-$(CONFIG_SH_HP6XX) += hp6xx
-machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
-machdir-$(CONFIG_SH_SH03) += sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
-machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR) += renesas/migor
-machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
-machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203
-machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa
-machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp
-machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr
-machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
-machdir-$(CONFIG_SH_LANDISK) += landisk
-machdir-$(CONFIG_SH_TITAN) += titan
-machdir-$(CONFIG_SH_SHMIN) += shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619
-machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN) += cayman
-
-incdir-y := $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
+machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
+machdir-$(CONFIG_SH_SH03) += mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
+machdir-$(CONFIG_SH_MIGOR) += mach-migor
+machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
+machdir-$(CONFIG_SH_LANDISK) += mach-landisk
+machdir-$(CONFIG_SH_TITAN) += mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
ifneq ($(machdir-y),)
core-y += $(addprefix arch/sh/boards/, \
@@ -145,11 +128,22 @@
# Companion chips
core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5
+cpuincdir-y += cpu-common # Must be last
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
@@ -160,57 +154,17 @@
boot := arch/sh/boot
-ifneq ($(KBUILD_SRC),)
-incdir-prefix := $(srctree)/include/asm-sh/
-else
-incdir-prefix :=
-endif
+cflags-y += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+ $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
-# Update machine arch and proc symlinks if something which affects
-# them changed. We use .arch and .mach to indicate when they were
-# updated last, otherwise make uses the target directory mtime.
-
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
- include/config/auto.conf FORCE
- @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
- @touch $@
-
-# Most boards have their own mach directories. For the ones that
-# don't, just reference the parent directory so the semantics are
-# kept roughly the same.
-#
-# When multiple boards are compiled in at the same time, preference
-# for the mach link is given to whichever has a directory for its
-# headers. However, this is only a workaround until platforms that
-# can live in the same kernel image back away from relying on the
-# mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
- include/config/auto.conf FORCE
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)rm -f include/asm-sh/mach
- $(Q)for i in $(incdir-y); do \
- if [ -d $(srctree)/include/asm-sh/$$i ]; then \
- echo -n ' SYMLINK include/asm-sh/mach -> '; \
- echo -e "include/asm-sh/$$i"; \
- ln -fsn $(incdir-prefix)$$i \
- include/asm-sh/mach; \
- else \
- if [ ! -d include/asm-sh/mach ]; then \
- echo -n ' SYMLINK include/asm-sh/mach -> '; \
- echo -e 'include/asm-sh'; \
- ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
- fi; \
- fi; \
- done
- @touch $@
+KBUILD_CFLAGS += -pipe $(cflags-y)
+KBUILD_CPPFLAGS += $(cflags-y)
+KBUILD_AFLAGS += $(cflags-y)
PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
- $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
+ $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h
all: $(KBUILD_IMAGE)
@@ -219,8 +173,7 @@
compressed: zImage
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
- arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
@@ -262,6 +215,4 @@
$(call filechk,gen-syscalltab)
CLEAN_FILES += arch/sh/lib64/syscalltab.h \
- include/asm-sh/machtypes.h \
- include/asm-sh/cpu include/asm-sh/.cpu \
- include/asm-sh/mach include/asm-sh/.mach
+ arch/sh/include/asm/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 0000000..ae19486
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
+
+config SH_SOLUTION_ENGINE
+ bool "SolutionEngine"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+ CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+ CPU_SUBTYPE_SH7750R
+ help
+ Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+ SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
+config SH_7721_SOLUTION_ENGINE
+ bool "SolutionEngine7721"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7721
+ help
+ Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+ evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+ bool "SolutionEngine7722"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select 7722 SolutionEngine if configuring for a Hitachi SH772
+ evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+ bool "SolutionEngine7751"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7751
+ help
+ Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+ evaluation board.
+
+config SH_7780_SOLUTION_ENGINE
+ bool "SolutionEngine7780"
+ select SOLUTION_ENGINE
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
+ help
+ Select 7780 SolutionEngine if configuring for a Renesas SH7780
+ evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+ bool "SolutionEngine7343"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7343
+ help
+ Select 7343 SolutionEngine if configuring for a Hitachi
+ SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+ bool "SystemH7751R"
+ depends on CPU_SUBTYPE_SH7751R
+ help
+ Select SystemH if you are configuring for a Renesas SystemH
+ 7751R evaluation board.
+
+config SH_HP6XX
+ bool "HP6XX"
+ select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select HP6XX if configuring for a HP jornada HP6xx.
+ More information (hardware only) at
+ <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+ bool "Dreamcast"
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
+ help
+ Select Dreamcast if configuring for a SEGA Dreamcast.
+ More information at <http://www.linux-sh.org>
+
+config SH_SH03
+ bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ CTP/PCI-SH03 is a CPU module computer that is produced
+ by Interface Corporation.
+ More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+ bool "SecureEdge5410"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select SecureEdge5410 if configuring for a SnapGear SH board.
+ This includes both the OEM SecureEdge products as well as the
+ SME product line.
+
+config SH_RTS7751R2D
+ bool "RTS7751R2D"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+ help
+ Select RTS7751R2D if configuring for a Renesas Technology
+ Sales SH-Graphics board.
+
+config SH_RSK7203
+ bool "RSK7203"
+ depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+ bool "SDK7780R3"
+ depends on CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+ evaluation board.
+
+config SH_HIGHLANDER
+ bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR
+ bool "SH7785LCR"
+ depends on CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+ bool "SH7785LCR 29bit physmaps"
+ depends on SH_SH7785LCR
+ default y
+ help
+ This board has 2 physical memory maps. It can be changed with
+ DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+ you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+ bool "Migo-R"
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select Migo-R if configuring for the SH7722 Migo-R platform
+ by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+ bool "AP-325RXA"
+ depends on CPU_SUBTYPE_SH7723
+ help
+ Renesas "AP-325RXA" support.
+ Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+ bool "SH7763RDP"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select SH7763RDP if configuring for a Renesas SH7763
+ evaluation board.
+
+config SH_EDOSK7705
+ bool "EDOSK7705"
+ depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ depends on CPU_SUBTYPE_SH4_202
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
+config SH_LANDISK
+ bool "LANDISK"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+ bool "TITAN"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select Titan if you are configuring for a Nimble Microsystems
+ NetEngine NP51R.
+
+config SH_SHMIN
+ bool "SHMIN"
+ depends on CPU_SUBTYPE_SH7706
+ select CPU_HAS_IPR_IRQ
+ help
+ Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+ bool "L-BOX RE2"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+ bool "SH-X3 Prototype board"
+ depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ depends on CPU_SUBTYPE_SH7720
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+ bool "Hitachi Cayman"
+ depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+ select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+ int SH_MAGIC_PANEL_R2_VERSION
+ default "3"
+ help
+ Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 0000000..ff9b93c
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN) += board-shmin..o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/board-ap325rxa.c
similarity index 98%
rename from arch/sh/boards/renesas/ap325rxa/setup.c
rename to arch/sh/boards/board-ap325rxa.c
index 7fa7446..9c71603 100644
--- a/arch/sh/boards/renesas/ap325rxa/setup.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -165,6 +165,7 @@
},
};
+#ifdef CONFIG_I2C
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -234,6 +235,7 @@
.platform_data = &camera_info,
},
};
+#endif /* CONFIG_I2C */
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
@@ -270,7 +272,9 @@
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
+#ifdef CONFIG_I2C
&camera_device,
+#endif
};
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
similarity index 100%
rename from arch/sh/boards/magicpanelr2/setup.c
rename to arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/board-rsk7203.c
similarity index 92%
rename from arch/sh/boards/renesas/rsk7203/setup.c
rename to arch/sh/boards/board-rsk7203.c
index 0bbda04..ffbedc5 100644
--- a/arch/sh/boards/renesas/rsk7203/setup.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -10,13 +10,20 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
#include <asm/machvec.h>
#include <asm/io.h>
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_16BIT,
+ .irq_flags = IRQF_TRIGGER_LOW,
+};
+
static struct resource smc911x_resources[] = {
[0] = {
.start = 0x24000000,
@@ -35,6 +42,9 @@
.id = -1,
.num_resources = ARRAY_SIZE(smc911x_resources),
.resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
};
static const char *probes[] = { "cmdlinepart", NULL };
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/board-sh7785lcr.c
similarity index 100%
rename from arch/sh/boards/renesas/sh7785lcr/setup.c
rename to arch/sh/boards/board-sh7785lcr.c
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
similarity index 100%
rename from arch/sh/boards/shmin/setup.c
rename to arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
similarity index 100%
rename from arch/sh/boards/cayman/Makefile
rename to arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
similarity index 99%
rename from arch/sh/boards/cayman/irq.c
rename to arch/sh/boards/mach-cayman/irq.c
index 30ec7be..ceb37ae 100644
--- a/arch/sh/boards/cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -13,7 +13,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/page.h>
/* Setup for the SMSC FDC37C935 / LAN91C100FD */
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
similarity index 100%
rename from arch/sh/boards/cayman/led.c
rename to arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
similarity index 99%
rename from arch/sh/boards/cayman/setup.c
rename to arch/sh/boards/mach-cayman/setup.c
index 8c9fa47..e7f9cc5 100644
--- a/arch/sh/boards/cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
similarity index 100%
rename from arch/sh/boards/dreamcast/Makefile
rename to arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
similarity index 98%
rename from arch/sh/boards/dreamcast/irq.c
rename to arch/sh/boards/mach-dreamcast/irq.c
index 9d0673a..67bdc33 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -12,7 +12,7 @@
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
/* Dreamcast System ASIC Hardware Events -
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
similarity index 100%
rename from arch/sh/boards/dreamcast/rtc.c
rename to arch/sh/boards/mach-dreamcast/rtc.c
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
similarity index 97%
rename from arch/sh/boards/dreamcast/setup.c
rename to arch/sh/boards/mach-dreamcast/setup.c
index 2581c8c..7d944fc 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -26,7 +26,7 @@
#include <asm/irq.h>
#include <asm/rtc.h>
#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach/sysasic.h>
extern struct hw_interrupt_type systemasic_int;
extern void aica_time_init(void);
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/edosk7705/Makefile
rename to arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
similarity index 100%
rename from arch/sh/boards/renesas/edosk7705/io.c
rename to arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/edosk7705/setup.c
rename to arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/Kconfig
rename to arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/Makefile
rename to arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
rename to arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
rename to arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
rename to arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c
similarity index 98%
rename from arch/sh/boards/renesas/r7780rp/psw.c
rename to arch/sh/boards/mach-highlander/psw.c
index c844dfa..be8d547 100644
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/push-switch.h>
static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/r7780rp/setup.c
rename to arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
similarity index 100%
rename from arch/sh/boards/hp6xx/Makefile
rename to arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
similarity index 100%
rename from arch/sh/boards/hp6xx/hp6xx_apm.c
rename to arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
similarity index 98%
rename from arch/sh/boards/hp6xx/pm.c
rename to arch/sh/boards/mach-hp6xx/pm.c
index d22f6ea..e96684d 100644
--- a/arch/sh/boards/hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -13,7 +13,7 @@
#include <asm/io.h>
#include <asm/hd64461.h>
#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#include <asm/pm.h>
#define STBCR 0xffffff82
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
similarity index 96%
rename from arch/sh/boards/hp6xx/pm_wakeup.S
rename to arch/sh/boards/mach-hp6xx/pm_wakeup.S
index 45e9bf0..44b648c 100644
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -8,7 +8,7 @@
*/
#include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#define k0 r0
#define k1 r1
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
similarity index 98%
rename from arch/sh/boards/hp6xx/setup.c
rename to arch/sh/boards/mach-hp6xx/setup.c
index 2f414ac..475b46c 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -16,7 +16,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#define SCPCR 0xa4000116
#define SCPDR 0xa4000136
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
similarity index 100%
rename from arch/sh/boards/landisk/Makefile
rename to arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
similarity index 97%
rename from arch/sh/boards/landisk/gio.c
rename to arch/sh/boards/mach-landisk/gio.c
index 0c15b0a..25cdf73 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -20,8 +20,8 @@
#include <linux/fs.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#define DEVCOUNT 4
#define GIO_MINOR 2 /* GIO minor no. */
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
similarity index 96%
rename from arch/sh/boards/landisk/irq.c
rename to arch/sh/boards/mach-landisk/irq.c
index 2586494..7b284cd 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
static void disable_landisk_irq(unsigned int irq)
{
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
similarity index 98%
rename from arch/sh/boards/landisk/psw.c
rename to arch/sh/boards/mach-landisk/psw.c
index 5a9b70b..e6b0efa 100644
--- a/arch/sh/boards/landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -14,7 +14,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#include <asm/push-switch.h>
static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
similarity index 98%
rename from arch/sh/boards/landisk/setup.c
rename to arch/sh/boards/mach-landisk/setup.c
index 2b708ec..db22ea2 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -18,7 +18,7 @@
#include <linux/pm.h>
#include <linux/mm.h>
#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#include <asm/io.h>
void init_landisk_IRQ(void);
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
similarity index 100%
rename from arch/sh/boards/lboxre2/Makefile
rename to arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
similarity index 100%
rename from arch/sh/boards/lboxre2/irq.c
rename to arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
similarity index 100%
rename from arch/sh/boards/lboxre2/setup.c
rename to arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
similarity index 100%
rename from arch/sh/boards/superh/microdev/Makefile
rename to arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
similarity index 100%
rename from arch/sh/boards/superh/microdev/io.c
rename to arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
similarity index 100%
rename from arch/sh/boards/superh/microdev/irq.c
rename to arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
similarity index 100%
rename from arch/sh/boards/superh/microdev/led.c
rename to arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
similarity index 100%
rename from arch/sh/boards/superh/microdev/setup.c
rename to arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
similarity index 100%
rename from arch/sh/boards/renesas/migor/Kconfig
rename to arch/sh/boards/mach-migor/Kconfig
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/mach-migor/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/migor/Makefile
rename to arch/sh/boards/mach-migor/Makefile
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
similarity index 100%
rename from arch/sh/boards/renesas/migor/lcd_qvga.c
rename to arch/sh/boards/mach-migor/lcd_qvga.c
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/mach-migor/setup.c
similarity index 99%
rename from arch/sh/boards/renesas/migor/setup.c
rename to arch/sh/boards/mach-migor/setup.c
index 7bd365a..e499ee3 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -304,6 +304,7 @@
ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
}
+#ifdef CONFIG_I2C
static unsigned char camera_ov772x_magic[] =
{
0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
@@ -391,6 +392,7 @@
.platform_data = &ov772x_info,
},
};
+#endif /* CONFIG_I2C */
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
@@ -429,7 +431,9 @@
&sh_keysc_device,
&migor_lcdc_device,
&migor_ceu_device,
+#ifdef CONFIG_I2C
&migor_camera_device,
+#endif
&migor_nor_flash_device,
&migor_nand_flash_device,
};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
similarity index 100%
rename from arch/sh/boards/renesas/rts7751r2d/Kconfig
rename to arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/rts7751r2d/Makefile
rename to arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
similarity index 100%
rename from arch/sh/boards/renesas/rts7751r2d/irq.c
rename to arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/rts7751r2d/setup.c
rename to arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
similarity index 100%
rename from arch/sh/boards/renesas/sdk7780/Kconfig
rename to arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/sdk7780/Makefile
rename to arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
similarity index 100%
rename from arch/sh/boards/renesas/sdk7780/irq.c
rename to arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/sdk7780/setup.c
rename to arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
similarity index 100%
rename from arch/sh/boards/se/7206/Makefile
rename to arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
similarity index 98%
rename from arch/sh/boards/se/7206/io.c
rename to arch/sh/boards/mach-se/7206/io.c
index 1308e61..9c3a332 100644
--- a/arch/sh/boards/se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
static inline void delay(void)
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
similarity index 98%
rename from arch/sh/boards/se/7206/irq.c
rename to arch/sh/boards/mach-se/7206/irq.c
index 9d5bfc7..aef7f05 100644
--- a/arch/sh/boards/se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -10,7 +10,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#define INTSTS0 0x31800000
#define INTSTS1 0x31800002
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
similarity index 98%
rename from arch/sh/boards/se/7206/setup.c
rename to arch/sh/boards/mach-se/7206/setup.c
index 4fe84cc..f5466384 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
similarity index 100%
rename from arch/sh/boards/se/7343/Makefile
rename to arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
similarity index 99%
rename from arch/sh/boards/se/7343/io.c
rename to arch/sh/boards/mach-se/7343/io.c
index 3a6d114..8741abc 100644
--- a/arch/sh/boards/se/7343/io.c
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -6,7 +6,7 @@
*/
#include <linux/kernel.h>
#include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
similarity index 96%
rename from arch/sh/boards/se/7343/irq.c
rename to arch/sh/boards/mach-se/7343/irq.c
index 1112e86..5d96e2e 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -13,9 +13,9 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
static void disable_se7343_irq(unsigned int irq)
{
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
similarity index 98%
rename from arch/sh/boards/se/7343/setup.c
rename to arch/sh/boards/mach-se/7343/setup.c
index 8ae718d..486f40b 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -2,7 +2,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
#include <asm/irq.h>
#include <asm/io.h>
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
similarity index 100%
rename from arch/sh/boards/se/770x/Makefile
rename to arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
similarity index 98%
rename from arch/sh/boards/se/770x/io.c
rename to arch/sh/boards/mach-se/770x/io.c
index b1ec085..28833c8 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
similarity index 98%
rename from arch/sh/boards/se/770x/irq.c
rename to arch/sh/boards/mach-se/770x/irq.c
index cdb0807..ec1fea5 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -13,7 +13,7 @@
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
static struct ipr_data ipr_irq_table[] = {
/*
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
similarity index 95%
rename from arch/sh/boards/se/770x/setup.c
rename to arch/sh/boards/mach-se/770x/setup.c
index cf4a5ba..9123d96 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -9,7 +9,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
#include <asm/heartbeat.h>
@@ -113,6 +113,8 @@
.resource = heartbeat_resources,
};
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7712)
/* SH771X Ethernet driver */
static struct resource sh_eth0_resources[] = {
[0] = {
@@ -159,12 +161,16 @@
.num_resources = ARRAY_SIZE(sh_eth1_resources),
.resource = sh_eth1_resources,
};
+#endif
static struct platform_device *se_devices[] __initdata = {
&heartbeat_device,
&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7712)
&sh_eth0_device,
&sh_eth1_device,
+#endif
};
static int __init se_devices_setup(void)
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
similarity index 100%
rename from arch/sh/boards/se/7721/Makefile
rename to arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
similarity index 96%
rename from arch/sh/boards/se/7721/irq.c
rename to arch/sh/boards/mach-se/7721/irq.c
index c4fdd62..b417acc 100644
--- a/arch/sh/boards/se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -11,7 +11,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
similarity index 98%
rename from arch/sh/boards/se/7721/setup.c
rename to arch/sh/boards/mach-se/7721/setup.c
index 1be3e92..d3fc80f 100644
--- a/arch/sh/boards/se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
similarity index 100%
rename from arch/sh/boards/se/7722/Makefile
rename to arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
similarity index 98%
rename from arch/sh/boards/se/7722/irq.c
rename to arch/sh/boards/mach-se/7722/irq.c
index 0b03f3f..02d21a3 100644
--- a/arch/sh/boards/se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
static void disable_se7722_irq(unsigned int irq)
{
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
similarity index 98%
rename from arch/sh/boards/se/7722/setup.c
rename to arch/sh/boards/mach-se/7722/setup.c
index 6e228ea..fe6f965 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -17,7 +17,7 @@
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
similarity index 100%
rename from arch/sh/boards/se/7751/Makefile
rename to arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
similarity index 98%
rename from arch/sh/boards/se/7751/io.c
rename to arch/sh/boards/mach-se/7751/io.c
index e8d846c..6287ae5 100644
--- a/arch/sh/boards/se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -12,7 +12,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/addrspace.h>
static inline volatile u16 *port2adr(unsigned int port)
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
similarity index 96%
rename from arch/sh/boards/se/7751/irq.c
rename to arch/sh/boards/mach-se/7751/irq.c
index c3d1259..5c9847e 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
static struct ipr_data ipr_irq_table[] = {
{ 13, 3, 3, 2 },
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
similarity index 100%
rename from arch/sh/boards/se/7751/pci.c
rename to arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
similarity index 97%
rename from arch/sh/boards/se/7751/setup.c
rename to arch/sh/boards/mach-se/7751/setup.c
index deefbfd..5057251 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -11,7 +11,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
similarity index 100%
rename from arch/sh/boards/se/7780/Makefile
rename to arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
similarity index 97%
rename from arch/sh/boards/se/7780/irq.c
rename to arch/sh/boards/mach-se/7780/irq.c
index 6bd70da..66ad292 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
/*
* Initialize IRQ setting
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
similarity index 98%
rename from arch/sh/boards/se/7780/setup.c
rename to arch/sh/boards/mach-se/7780/setup.c
index 0f08ab3..1d3a867 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 0000000..2de42ba
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
similarity index 100%
rename from arch/sh/boards/se/7619/setup.c
rename to arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
similarity index 100%
rename from arch/sh/boards/sh03/Makefile
rename to arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
similarity index 100%
rename from arch/sh/boards/sh03/rtc.c
rename to arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
similarity index 95%
rename from arch/sh/boards/sh03/setup.c
rename to arch/sh/boards/mach-sh03/setup.c
index 934ac4f1..5771219 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -11,8 +11,8 @@
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
#include <asm/addrspace.h>
static void __init init_sh03_IRQ(void)
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/sh7763rdp/Makefile
rename to arch/sh/boards/mach-sh7763rdp/Makefile
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
similarity index 100%
rename from arch/sh/boards/renesas/sh7763rdp/irq.c
rename to arch/sh/boards/mach-sh7763rdp/irq.c
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/sh7763rdp/setup.c
rename to arch/sh/boards/mach-sh7763rdp/setup.c
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
similarity index 100%
rename from arch/sh/boards/snapgear/Makefile
rename to arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
similarity index 100%
rename from arch/sh/boards/snapgear/io.c
rename to arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
similarity index 98%
rename from arch/sh/boards/snapgear/setup.c
rename to arch/sh/boards/mach-snapgear/setup.c
index 7022483..a5e349d 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -22,7 +22,7 @@
#include <asm/snapgear.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
/*
* EraseConfig handling functions
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/systemh/Makefile
rename to arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
similarity index 100%
rename from arch/sh/boards/renesas/systemh/io.c
rename to arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
similarity index 100%
rename from arch/sh/boards/renesas/systemh/irq.c
rename to arch/sh/boards/mach-systemh/irq.c
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/systemh/setup.c
rename to arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
similarity index 100%
rename from arch/sh/boards/titan/Makefile
rename to arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
similarity index 100%
rename from arch/sh/boards/titan/io.c
rename to arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
similarity index 100%
rename from arch/sh/boards/titan/setup.c
rename to arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
similarity index 100%
rename from arch/sh/boards/renesas/x3proto/Makefile
rename to arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
similarity index 100%
rename from arch/sh/boards/renesas/x3proto/ilsel.c
rename to arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
similarity index 100%
rename from arch/sh/boards/renesas/x3proto/setup.c
rename to arch/sh/boards/mach-x3proto/setup.c
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc..0000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int SH_MAGIC_PANEL_R2_VERSION
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586..0000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
deleted file mode 100644
index f663768..0000000
--- a/arch/sh/boards/renesas/ap325rxa/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y := setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
deleted file mode 100644
index f663768..0000000
--- a/arch/sh/boards/renesas/rsk7203/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y := setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
deleted file mode 100644
index 7703756..0000000
--- a/arch/sh/boards/renesas/sh7785lcr/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y := setup.o
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c..0000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc7..0000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y := setup.o
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 8b37869..5b54965 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@
CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
+CONFIG_ENTRY_OFFSET ?= 0x00001000
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET
+ CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c198..622eac3 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
* Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
*/
#include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
/*
* Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5471df5..29926a9 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed Jun 4 17:30:00 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -79,9 +80,14 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -99,6 +105,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -175,6 +182,7 @@
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -376,6 +384,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -466,6 +476,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
@@ -512,10 +523,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -587,6 +598,7 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -620,6 +632,7 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -631,6 +644,7 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
@@ -667,10 +681,6 @@
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
@@ -679,6 +689,7 @@
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -752,6 +763,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -762,17 +774,16 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -842,6 +853,7 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -898,6 +910,10 @@
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -937,6 +953,7 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 5772878..d407528 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,9 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:34:24 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -19,6 +21,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -37,12 +40,15 @@
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -55,21 +61,38 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -80,6 +103,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -93,13 +117,17 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +136,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
CONFIG_CPU_SUBTYPE_SH7091=y
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +145,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -133,6 +165,7 @@
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +175,15 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +191,8 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +232,7 @@
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -204,7 +243,10 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +281,15 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -263,10 +308,7 @@
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -291,6 +333,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -309,6 +352,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +360,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -334,10 +376,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -345,6 +383,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -366,6 +405,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -374,6 +414,7 @@
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +425,15 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -400,44 +445,49 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -449,6 +499,7 @@
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -464,12 +515,12 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +542,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -505,6 +555,8 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_MAPLE is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +582,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -553,6 +608,19 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -568,45 +636,40 @@
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
#
-# SPI support
+# Sonics Silicon Backplane
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@@ -615,11 +678,12 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +717,15 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -680,49 +752,30 @@
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -735,14 +788,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -771,7 +821,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -786,14 +835,14 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
@@ -807,35 +856,25 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
@@ -845,14 +884,95 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38d..41e25b3 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -34,12 +37,15 @@
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -86,13 +107,17 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -126,6 +155,7 @@
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0d000000
CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -219,11 +254,14 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -237,10 +275,6 @@
#
CONFIG_ISA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@
#
# Power management options (EXPERIMENTAL)
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
#
@@ -282,9 +317,12 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -332,6 +373,7 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
@@ -387,6 +430,7 @@
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -417,9 +464,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -439,7 +488,6 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -454,39 +502,45 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
@@ -495,11 +549,12 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -533,15 +601,13 @@
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -606,13 +657,10 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -658,8 +705,11 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
@@ -668,10 +718,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@
# CONFIG_NLS_UTF8 is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934a..99cc39c 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec 7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -91,67 +114,26 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -214,19 +203,32 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -241,12 +243,11 @@
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
#
# Additional SuperH Device Drivers
#
+CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
@@ -254,13 +255,17 @@
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -273,16 +278,12 @@
#
# Bus options
#
-CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -331,13 +319,14 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -432,9 +404,20 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -443,35 +426,17 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -590,77 +556,43 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
-# PCMCIA network device support
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -826,6 +728,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -835,7 +738,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -845,6 +747,7 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -858,10 +761,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -880,22 +786,10 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -903,65 +797,77 @@
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
#
-# Video Capture Adapters
+# Multimedia drivers
#
-
-#
-# Video Capture Adapters
-#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -1276,7 +1100,6 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1343,26 +1162,24 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cd..aecdfd3 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -95,66 +114,26 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -219,12 +203,21 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
#
# Timer and clock configuration
@@ -232,6 +225,10 @@
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -246,7 +243,6 @@
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
@@ -262,11 +258,14 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -280,15 +279,12 @@
#
# Bus options
#
-CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -336,7 +319,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -344,6 +326,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
@@ -401,20 +381,8 @@
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -438,9 +402,20 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -449,36 +424,17 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -510,6 +465,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -538,71 +495,49 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -838,6 +722,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -847,7 +732,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -857,6 +741,7 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -870,10 +755,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -892,22 +780,10 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -915,125 +791,104 @@
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# SPI RTC drivers
#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Engine support
+# on-CPU RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -1091,20 +938,16 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1151,14 +993,14 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5..a3a80f3 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -35,12 +38,16 @@
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -94,13 +118,17 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -134,6 +166,7 @@
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0C000000
CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@
CONFIG_SH_DSP=y
CONFIG_SH_ADC=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_DSP=y
@@ -196,6 +232,7 @@
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -228,11 +265,14 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -245,10 +285,6 @@
# Bus options
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -289,6 +325,7 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -325,6 +356,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -374,6 +410,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@
CONFIG_MTD_PHYSMAP_START=0x0000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -440,11 +476,14 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -457,18 +496,24 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -477,10 +522,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -516,6 +560,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -569,60 +616,72 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -684,18 +728,14 @@
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -744,30 +783,29 @@
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_SH_KGDB=y
#
@@ -904,14 +938,17 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951..e4b900e 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -31,10 +38,16 @@
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -83,59 +109,26 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -214,6 +234,7 @@
#
# DMA support
#
+CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
@@ -251,30 +280,16 @@
# Bus options
#
CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -282,12 +297,13 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -355,9 +356,20 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -366,159 +378,96 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=1
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -536,6 +485,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -554,143 +504,93 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -702,20 +602,18 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -762,21 +659,20 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_WP512 is not set
#
-# Hardware crypto devices
+# Ciphers
#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b..c4b3e1d 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -90,12 +96,13 @@
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -173,7 +180,9 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +225,8 @@
#
# CONFIG_SH_7722_SOLUTION_ENGINE is not set
CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
#
# Timer and clock configuration
@@ -362,6 +373,7 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -378,6 +390,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -475,6 +489,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +536,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -537,6 +552,7 @@
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +618,7 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -636,21 +653,35 @@
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +694,7 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -674,6 +706,7 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
@@ -710,10 +743,6 @@
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -738,7 +767,7 @@
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +786,7 @@
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -790,6 +820,7 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -810,6 +841,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -870,6 +902,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -899,6 +932,7 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +989,10 @@
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1032,7 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a07261..57a3007 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar 6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -115,7 +124,6 @@
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
@@ -126,6 +134,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
@@ -348,14 +361,13 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -384,6 +396,7 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -499,9 +516,13 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -616,32 +640,28 @@
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -661,6 +682,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -750,12 +774,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -776,6 +795,7 @@
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -787,13 +807,24 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
@@ -809,24 +840,9 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -903,7 +919,6 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7..1d09d24 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -39,18 +42,16 @@
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -101,6 +120,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
@@ -109,7 +129,10 @@
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -157,7 +184,9 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@
# Board support
#
CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_R7780MP is not set
CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
@@ -295,6 +327,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -355,6 +387,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -464,6 +504,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -608,13 +659,13 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -697,12 +751,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -722,6 +771,8 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -733,13 +784,24 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -751,15 +813,15 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -800,24 +864,9 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -896,14 +943,11 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1040,6 +1080,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd43..840fe38 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun 3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -162,7 +173,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@
#
# Board support
#
+CONFIG_SH_RSK7203=y
#
# Timer and clock configuration
@@ -274,6 +288,7 @@
#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
@@ -503,6 +519,15 @@
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -587,6 +612,7 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
@@ -605,6 +631,7 @@
# Multimedia drivers
#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -618,26 +645,96 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -734,6 +832,7 @@
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd..8413236 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb 7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -36,17 +39,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -106,7 +116,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
@@ -116,6 +125,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -161,7 +173,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
@@ -332,8 +346,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
@@ -399,14 +414,18 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -466,6 +485,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -634,6 +662,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -690,9 +719,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -726,10 +757,6 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -765,6 +792,8 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -776,13 +805,24 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -802,8 +842,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -1022,12 +1023,16 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
@@ -1096,9 +1104,12 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -1155,14 +1165,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9..7d9fa6e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb 7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -36,17 +39,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -106,7 +116,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
@@ -116,6 +125,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -161,7 +173,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
@@ -332,8 +346,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
@@ -399,14 +414,18 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -466,6 +485,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -634,6 +662,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -690,9 +719,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -726,10 +757,6 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -765,6 +792,8 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -776,13 +805,24 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -802,8 +842,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -1022,12 +1023,16 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
@@ -1096,9 +1104,12 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -1155,14 +1165,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6..6d834f2 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -38,24 +40,23 @@
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -103,6 +120,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
@@ -113,6 +131,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -159,7 +180,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
CONFIG_SH_SDK7780=y
# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
CONFIG_SH_SDK7780_BASE=y
#
@@ -250,12 +273,13 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
@@ -321,6 +345,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
@@ -417,9 +442,9 @@
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_SCH_FIFO=y
#
@@ -427,6 +452,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -600,6 +624,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -743,7 +778,6 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -847,22 +885,20 @@
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -870,8 +906,10 @@
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -900,15 +949,15 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -970,24 +1021,9 @@
CONFIG_LOGO_SUPERH_MONO=y
CONFIG_LOGO_SUPERH_VGA16=y
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1014,15 +1051,18 @@
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1067,10 +1109,6 @@
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1096,16 +1134,10 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1117,13 +1149,11 @@
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1145,14 +1175,11 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1288,6 +1314,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa..af15cbe 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun 3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -175,7 +182,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@
#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_93CX6=y
# CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -594,6 +606,7 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
@@ -625,10 +638,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
@@ -669,6 +678,7 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -728,6 +738,7 @@
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 7b72736..4e30b70 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul 7 13:12:45 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
@@ -90,12 +96,13 @@
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -171,6 +178,7 @@
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -368,6 +376,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -455,6 +465,7 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -497,10 +508,10 @@
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -513,13 +524,13 @@
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
#
@@ -572,6 +583,7 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -617,6 +629,7 @@
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
@@ -646,6 +659,7 @@
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_DAB is not set
@@ -657,9 +671,9 @@
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
@@ -676,6 +690,7 @@
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -690,15 +705,7 @@
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -714,40 +721,14 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# SUPERH devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_SUPERH=y
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -759,6 +740,7 @@
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
@@ -836,6 +818,7 @@
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -854,7 +837,6 @@
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -885,6 +867,7 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -941,6 +924,10 @@
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -980,6 +967,7 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1..80c1c72 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -87,14 +95,17 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH2=y
CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -126,6 +142,7 @@
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -159,8 +182,6 @@
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
#
# Board support
@@ -185,7 +206,6 @@
#
# DMA support
#
-# CONFIG_SH_DMA is not set
#
# Companion Chips
@@ -205,11 +225,13 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
#
# Boot options
@@ -221,15 +243,13 @@
#
# Bus options
#
+# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -275,6 +292,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -364,21 +370,10 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -386,13 +381,13 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -416,6 +411,7 @@
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -433,123 +429,84 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -561,12 +518,9 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
#
# Miscellaneous filesystems
@@ -607,8 +560,11 @@
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
@@ -617,28 +573,23 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -646,20 +597,20 @@
# Security options
#
# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11b..af7bb58 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
#include <asm/dma.h>
struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad5..391cbe1 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
#include <asm/dma.h>
#include <asm/io.h>
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6..b2ffe64 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
#include <asm/dma.h>
#include <asm/io.h>
#include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fb..b05af34 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
#ifndef __DMA_SH_H
#define __DMA_SH_H
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
/* Definitions for the SuperH DMAC */
#define REQ_L 0x00000000
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c446993..2bf85cf 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
static void __init gapspci_fixup_resources(struct pci_dev *dev)
{
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275f..5ccf9ea 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include "pci-sh5.h"
static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f54c291..f5d2a2a 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
static struct resource gapspci_io_resource = {
.name = "GAPSPCI IO",
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c..3145c62 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include "pci-sh4.h"
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df..7a97438 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/pci.h>
#include <asm/io.h>
#include "pci-sh5.h"
diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore
new file mode 100644
index 0000000..378db77
--- /dev/null
+++ b/arch/sh/include/asm/.gitignore
@@ -0,0 +1 @@
+machtypes.h
diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild
similarity index 100%
rename from include/asm-sh/Kbuild
rename to arch/sh/include/asm/Kbuild
diff --git a/include/asm-sh/a.out.h b/arch/sh/include/asm/a.out.h
similarity index 100%
rename from include/asm-sh/a.out.h
rename to arch/sh/include/asm/a.out.h
diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h
similarity index 88%
rename from include/asm-sh/adc.h
rename to arch/sh/include/asm/adc.h
index 5f85cf7..48824c1 100644
--- a/include/asm-sh/adc.h
+++ b/arch/sh/include/asm/adc.h
@@ -5,7 +5,7 @@
* Copyright (C) 2004 Andriy Skulysh
*/
-#include <asm/cpu/adc.h>
+#include <cpu/adc.h>
int adc_single(unsigned int channel);
diff --git a/include/asm-sh/addrspace.h b/arch/sh/include/asm/addrspace.h
similarity index 97%
rename from include/asm-sh/addrspace.h
rename to arch/sh/include/asm/addrspace.h
index fa544fc..2702d81 100644
--- a/include/asm-sh/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -12,7 +12,7 @@
#ifdef __KERNEL__
-#include <asm/cpu/addrspace.h>
+#include <cpu/addrspace.h>
/* If this CPU supports segmentation, hook up the helpers */
#ifdef P1SEG
diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
similarity index 100%
rename from include/asm-sh/atomic-grb.h
rename to arch/sh/include/asm/atomic-grb.h
diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
similarity index 100%
rename from include/asm-sh/atomic-irq.h
rename to arch/sh/include/asm/atomic-irq.h
diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
similarity index 100%
rename from include/asm-sh/atomic-llsc.h
rename to arch/sh/include/asm/atomic-llsc.h
diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h
similarity index 100%
rename from include/asm-sh/atomic.h
rename to arch/sh/include/asm/atomic.h
diff --git a/include/asm-sh/auxvec.h b/arch/sh/include/asm/auxvec.h
similarity index 94%
rename from include/asm-sh/auxvec.h
rename to arch/sh/include/asm/auxvec.h
index a6b9d4f..483effd 100644
--- a/include/asm-sh/auxvec.h
+++ b/arch/sh/include/asm/auxvec.h
@@ -12,7 +12,7 @@
*/
#define AT_FPUCW 18 /* Used FPU control word. */
-#ifdef CONFIG_VSYSCALL
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
/*
* Only define this in the vsyscall case, the entry point to
* the vsyscall page gets placed here. The kernel will attempt
diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
similarity index 100%
rename from include/asm-sh/bitops-grb.h
rename to arch/sh/include/asm/bitops-grb.h
diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
similarity index 100%
rename from include/asm-sh/bitops-irq.h
rename to arch/sh/include/asm/bitops-irq.h
diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h
similarity index 100%
rename from include/asm-sh/bitops.h
rename to arch/sh/include/asm/bitops.h
diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h
similarity index 100%
rename from include/asm-sh/bug.h
rename to arch/sh/include/asm/bug.h
diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h
similarity index 100%
rename from include/asm-sh/bugs.h
rename to arch/sh/include/asm/bugs.h
diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h
similarity index 100%
rename from include/asm-sh/byteorder.h
rename to arch/sh/include/asm/byteorder.h
diff --git a/include/asm-sh/cache.h b/arch/sh/include/asm/cache.h
similarity index 97%
rename from include/asm-sh/cache.h
rename to arch/sh/include/asm/cache.h
index 083419f..02df18e 100644
--- a/include/asm-sh/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -10,7 +10,7 @@
#ifdef __KERNEL__
#include <linux/init.h>
-#include <asm/cpu/cache.h>
+#include <cpu/cache.h>
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
diff --git a/include/asm-sh/cacheflush.h b/arch/sh/include/asm/cacheflush.h
similarity index 98%
rename from include/asm-sh/cacheflush.h
rename to arch/sh/include/asm/cacheflush.h
index e034c36..09acbc3 100644
--- a/include/asm-sh/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -27,7 +27,7 @@
#define __flush_purge_region(start, size) do { (void)(start); } while (0)
#define __flush_invalidate_region(start, size) do { (void)(start); } while (0)
#else
-#include <asm/cpu/cacheflush.h>
+#include <cpu/cacheflush.h>
/*
* Consistent DMA requires that the __flush_xxx() primitives must be set
diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h
similarity index 100%
rename from include/asm-sh/checksum.h
rename to arch/sh/include/asm/checksum.h
diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h
similarity index 100%
rename from include/asm-sh/checksum_32.h
rename to arch/sh/include/asm/checksum_32.h
diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h
similarity index 100%
rename from include/asm-sh/checksum_64.h
rename to arch/sh/include/asm/checksum_64.h
diff --git a/include/asm-sh/clock.h b/arch/sh/include/asm/clock.h
similarity index 100%
rename from include/asm-sh/clock.h
rename to arch/sh/include/asm/clock.h
diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
similarity index 100%
rename from include/asm-sh/cmpxchg-grb.h
rename to arch/sh/include/asm/cmpxchg-grb.h
diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
similarity index 100%
rename from include/asm-sh/cmpxchg-irq.h
rename to arch/sh/include/asm/cmpxchg-irq.h
diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h
similarity index 100%
rename from include/asm-sh/cpu-features.h
rename to arch/sh/include/asm/cpu-features.h
diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h
similarity index 100%
rename from include/asm-sh/cputime.h
rename to arch/sh/include/asm/cputime.h
diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h
similarity index 100%
rename from include/asm-sh/current.h
rename to arch/sh/include/asm/current.h
diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h
similarity index 100%
rename from include/asm-sh/delay.h
rename to arch/sh/include/asm/delay.h
diff --git a/include/asm-sh/device.h b/arch/sh/include/asm/device.h
similarity index 100%
rename from include/asm-sh/device.h
rename to arch/sh/include/asm/device.h
diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h
similarity index 100%
rename from include/asm-sh/div64.h
rename to arch/sh/include/asm/div64.h
diff --git a/include/asm-sh/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
similarity index 100%
rename from include/asm-sh/dma-mapping.h
rename to arch/sh/include/asm/dma-mapping.h
diff --git a/include/asm-sh/dma.h b/arch/sh/include/asm/dma.h
similarity index 98%
rename from include/asm-sh/dma.h
rename to arch/sh/include/asm/dma.h
index a65b02f..beca712 100644
--- a/include/asm-sh/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -15,7 +15,7 @@
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
/* The maximum address that we can perform a DMA transfer to on this platform */
/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h
similarity index 100%
rename from include/asm-sh/dmabrg.h
rename to arch/sh/include/asm/dmabrg.h
diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h
similarity index 100%
rename from include/asm-sh/edosk7705.h
rename to arch/sh/include/asm/edosk7705.h
diff --git a/include/asm-sh/elf.h b/arch/sh/include/asm/elf.h
similarity index 100%
rename from include/asm-sh/elf.h
rename to arch/sh/include/asm/elf.h
diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-sh/emergency-restart.h
rename to arch/sh/include/asm/emergency-restart.h
diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S
similarity index 100%
rename from include/asm-sh/entry-macros.S
rename to arch/sh/include/asm/entry-macros.S
diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h
similarity index 100%
rename from include/asm-sh/errno.h
rename to arch/sh/include/asm/errno.h
diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h
similarity index 100%
rename from include/asm-sh/fb.h
rename to arch/sh/include/asm/fb.h
diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h
similarity index 100%
rename from include/asm-sh/fcntl.h
rename to arch/sh/include/asm/fcntl.h
diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h
similarity index 100%
rename from include/asm-sh/fixmap.h
rename to arch/sh/include/asm/fixmap.h
diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h
similarity index 100%
rename from include/asm-sh/flat.h
rename to arch/sh/include/asm/flat.h
diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h
similarity index 100%
rename from include/asm-sh/fpu.h
rename to arch/sh/include/asm/fpu.h
diff --git a/include/asm-sh/freq.h b/arch/sh/include/asm/freq.h
similarity index 94%
rename from include/asm-sh/freq.h
rename to arch/sh/include/asm/freq.h
index 39c0e09..4ece90b 100644
--- a/include/asm-sh/freq.h
+++ b/arch/sh/include/asm/freq.h
@@ -12,7 +12,7 @@
#define __ASM_SH_FREQ_H
#ifdef __KERNEL__
-#include <asm/cpu/freq.h>
+#include <cpu/freq.h>
#endif /* __KERNEL__ */
#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h
similarity index 100%
rename from include/asm-sh/futex-irq.h
rename to arch/sh/include/asm/futex-irq.h
diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h
similarity index 100%
rename from include/asm-sh/futex.h
rename to arch/sh/include/asm/futex.h
diff --git a/include/asm-sh/gpio.h b/arch/sh/include/asm/gpio.h
similarity index 93%
rename from include/asm-sh/gpio.h
rename to arch/sh/include/asm/gpio.h
index 9bb27e0..cf32bd2 100644
--- a/include/asm-sh/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -13,7 +13,7 @@
#define __ASM_SH_GPIO_H
#if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
+#include <cpu/gpio.h>
#endif
#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h
similarity index 100%
rename from include/asm-sh/hardirq.h
rename to arch/sh/include/asm/hardirq.h
diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h
similarity index 100%
rename from include/asm-sh/hd64461.h
rename to arch/sh/include/asm/hd64461.h
diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
similarity index 100%
rename from include/asm-sh/hd64465/gpio.h
rename to arch/sh/include/asm/hd64465/gpio.h
diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
similarity index 100%
rename from include/asm-sh/hd64465/hd64465.h
rename to arch/sh/include/asm/hd64465/hd64465.h
diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
similarity index 100%
rename from include/asm-sh/hd64465/io.h
rename to arch/sh/include/asm/hd64465/io.h
diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h
similarity index 100%
rename from include/asm-sh/heartbeat.h
rename to arch/sh/include/asm/heartbeat.h
diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h
similarity index 100%
rename from include/asm-sh/hp6xx.h
rename to arch/sh/include/asm/hp6xx.h
diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h
similarity index 100%
rename from include/asm-sh/hugetlb.h
rename to arch/sh/include/asm/hugetlb.h
diff --git a/include/asm-sh/hw_irq.h b/arch/sh/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-sh/hw_irq.h
rename to arch/sh/include/asm/hw_irq.h
diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
similarity index 100%
rename from include/asm-sh/i2c-sh7760.h
rename to arch/sh/include/asm/i2c-sh7760.h
diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h
similarity index 100%
rename from include/asm-sh/ilsel.h
rename to arch/sh/include/asm/ilsel.h
diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h
similarity index 100%
rename from include/asm-sh/io.h
rename to arch/sh/include/asm/io.h
diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h
similarity index 100%
rename from include/asm-sh/io_generic.h
rename to arch/sh/include/asm/io_generic.h
diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h
similarity index 100%
rename from include/asm-sh/io_trapped.h
rename to arch/sh/include/asm/io_trapped.h
diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h
similarity index 100%
rename from include/asm-sh/ioctl.h
rename to arch/sh/include/asm/ioctl.h
diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h
similarity index 100%
rename from include/asm-sh/ioctls.h
rename to arch/sh/include/asm/ioctls.h
diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-sh/ipcbuf.h
rename to arch/sh/include/asm/ipcbuf.h
diff --git a/include/asm-sh/irq.h b/arch/sh/include/asm/irq.h
similarity index 97%
rename from include/asm-sh/irq.h
rename to arch/sh/include/asm/irq.h
index ca66e5d..6195a53 100644
--- a/include/asm-sh/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -51,7 +51,7 @@
#endif
#ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#endif
#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-sh/irq_regs.h
rename to arch/sh/include/asm/irq_regs.h
diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h
similarity index 100%
rename from include/asm-sh/irqflags.h
rename to arch/sh/include/asm/irqflags.h
diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
similarity index 100%
rename from include/asm-sh/irqflags_32.h
rename to arch/sh/include/asm/irqflags_32.h
diff --git a/include/asm-sh/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
similarity index 97%
rename from include/asm-sh/irqflags_64.h
rename to arch/sh/include/asm/irqflags_64.h
index 4f6b8a5..88f6522 100644
--- a/include/asm-sh/irqflags_64.h
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -1,7 +1,7 @@
#ifndef __ASM_SH_IRQFLAGS_64_H
#define __ASM_SH_IRQFLAGS_64_H
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#define SR_MASK_LL 0x00000000000000f0LL
#define SR_BL_LL 0x0000000010000000LL
diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h
similarity index 100%
rename from include/asm-sh/kdebug.h
rename to arch/sh/include/asm/kdebug.h
diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h
similarity index 100%
rename from include/asm-sh/kexec.h
rename to arch/sh/include/asm/kexec.h
diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h
similarity index 100%
rename from include/asm-sh/kgdb.h
rename to arch/sh/include/asm/kgdb.h
diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-sh/kmap_types.h
rename to arch/sh/include/asm/kmap_types.h
diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h
similarity index 100%
rename from include/asm-sh/lboxre2.h
rename to arch/sh/include/asm/lboxre2.h
diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h
similarity index 100%
rename from include/asm-sh/linkage.h
rename to arch/sh/include/asm/linkage.h
diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h
similarity index 100%
rename from include/asm-sh/local.h
rename to arch/sh/include/asm/local.h
diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h
similarity index 100%
rename from include/asm-sh/machvec.h
rename to arch/sh/include/asm/machvec.h
diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
similarity index 100%
rename from include/asm-sh/magicpanelr2.h
rename to arch/sh/include/asm/magicpanelr2.h
diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
similarity index 100%
rename from include/asm-sh/mc146818rtc.h
rename to arch/sh/include/asm/mc146818rtc.h
diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h
similarity index 100%
rename from include/asm-sh/microdev.h
rename to arch/sh/include/asm/microdev.h
diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h
similarity index 100%
rename from include/asm-sh/migor.h
rename to arch/sh/include/asm/migor.h
diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h
similarity index 100%
rename from include/asm-sh/mman.h
rename to arch/sh/include/asm/mman.h
diff --git a/include/asm-sh/mmu.h b/arch/sh/include/asm/mmu.h
similarity index 100%
rename from include/asm-sh/mmu.h
rename to arch/sh/include/asm/mmu.h
diff --git a/include/asm-sh/mmu_context.h b/arch/sh/include/asm/mmu_context.h
similarity index 98%
rename from include/asm-sh/mmu_context.h
rename to arch/sh/include/asm/mmu_context.h
index 8589a50..04c0c97 100644
--- a/include/asm-sh/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -8,7 +8,7 @@
#define __ASM_SH_MMU_CONTEXT_H
#ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
#include <asm/io.h>
diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
similarity index 100%
rename from include/asm-sh/mmu_context_32.h
rename to arch/sh/include/asm/mmu_context_32.h
diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
similarity index 97%
rename from include/asm-sh/mmu_context_64.h
rename to arch/sh/include/asm/mmu_context_64.h
index 9649f1c..de12102 100644
--- a/include/asm-sh/mmu_context_64.h
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -11,7 +11,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#include <asm/cacheflush.h>
#define SR_ASID_MASK 0xffffffffff00ffffULL
diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h
similarity index 100%
rename from include/asm-sh/mmzone.h
rename to arch/sh/include/asm/mmzone.h
diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h
similarity index 100%
rename from include/asm-sh/module.h
rename to arch/sh/include/asm/module.h
diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-sh/msgbuf.h
rename to arch/sh/include/asm/msgbuf.h
diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h
similarity index 100%
rename from include/asm-sh/mutex.h
rename to arch/sh/include/asm/mutex.h
diff --git a/include/asm-sh/page.h b/arch/sh/include/asm/page.h
similarity index 100%
rename from include/asm-sh/page.h
rename to arch/sh/include/asm/page.h
diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h
similarity index 100%
rename from include/asm-sh/param.h
rename to arch/sh/include/asm/param.h
diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h
similarity index 100%
rename from include/asm-sh/parport.h
rename to arch/sh/include/asm/parport.h
diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h
similarity index 100%
rename from include/asm-sh/pci.h
rename to arch/sh/include/asm/pci.h
diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h
similarity index 100%
rename from include/asm-sh/percpu.h
rename to arch/sh/include/asm/percpu.h
diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-sh/pgalloc.h
rename to arch/sh/include/asm/pgalloc.h
diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h
similarity index 100%
rename from include/asm-sh/pgtable.h
rename to arch/sh/include/asm/pgtable.h
diff --git a/include/asm-sh/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
similarity index 100%
rename from include/asm-sh/pgtable_32.h
rename to arch/sh/include/asm/pgtable_32.h
diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
similarity index 100%
rename from include/asm-sh/pgtable_64.h
rename to arch/sh/include/asm/pgtable_64.h
diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h
similarity index 100%
rename from include/asm-sh/pm.h
rename to arch/sh/include/asm/pm.h
diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h
similarity index 100%
rename from include/asm-sh/poll.h
rename to arch/sh/include/asm/poll.h
diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h
similarity index 100%
rename from include/asm-sh/posix_types.h
rename to arch/sh/include/asm/posix_types.h
diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
similarity index 100%
rename from include/asm-sh/posix_types_32.h
rename to arch/sh/include/asm/posix_types_32.h
diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
similarity index 100%
rename from include/asm-sh/posix_types_64.h
rename to arch/sh/include/asm/posix_types_64.h
diff --git a/include/asm-sh/processor.h b/arch/sh/include/asm/processor.h
similarity index 100%
rename from include/asm-sh/processor.h
rename to arch/sh/include/asm/processor.h
diff --git a/include/asm-sh/processor_32.h b/arch/sh/include/asm/processor_32.h
similarity index 97%
rename from include/asm-sh/processor_32.h
rename to arch/sh/include/asm/processor_32.h
index c6583f2..0dadd75 100644
--- a/include/asm-sh/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -19,7 +19,7 @@
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
-#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; })
+#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
/* Core Processor Version Register */
#define CCN_PVR 0xff000030
diff --git a/include/asm-sh/processor_64.h b/arch/sh/include/asm/processor_64.h
similarity index 99%
rename from include/asm-sh/processor_64.h
rename to arch/sh/include/asm/processor_64.h
index fc7fc68..770d516 100644
--- a/include/asm-sh/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -19,7 +19,7 @@
#include <asm/types.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/*
* Default implementation of macro that returns current
diff --git a/include/asm-sh/ptrace.h b/arch/sh/include/asm/ptrace.h
similarity index 100%
rename from include/asm-sh/ptrace.h
rename to arch/sh/include/asm/ptrace.h
diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h
similarity index 100%
rename from include/asm-sh/push-switch.h
rename to arch/sh/include/asm/push-switch.h
diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h
similarity index 100%
rename from include/asm-sh/r7780rp.h
rename to arch/sh/include/asm/r7780rp.h
diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h
similarity index 100%
rename from include/asm-sh/resource.h
rename to arch/sh/include/asm/resource.h
diff --git a/include/asm-sh/rtc.h b/arch/sh/include/asm/rtc.h
similarity index 91%
rename from include/asm-sh/rtc.h
rename to arch/sh/include/asm/rtc.h
index ec45ba8..1813f42 100644
--- a/include/asm-sh/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -11,6 +11,6 @@
unsigned long capabilities;
};
-#include <asm/cpu/rtc.h>
+#include <cpu/rtc.h>
#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
similarity index 100%
rename from include/asm-sh/rts7751r2d.h
rename to arch/sh/include/asm/rts7751r2d.h
diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h
similarity index 100%
rename from include/asm-sh/rwsem.h
rename to arch/sh/include/asm/rwsem.h
diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h
similarity index 100%
rename from include/asm-sh/scatterlist.h
rename to arch/sh/include/asm/scatterlist.h
diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h
similarity index 100%
rename from include/asm-sh/sdk7780.h
rename to arch/sh/include/asm/sdk7780.h
diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h
similarity index 100%
rename from include/asm-sh/sections.h
rename to arch/sh/include/asm/sections.h
diff --git a/include/asm-sh/segment.h b/arch/sh/include/asm/segment.h
similarity index 100%
rename from include/asm-sh/segment.h
rename to arch/sh/include/asm/segment.h
diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h
similarity index 100%
rename from include/asm-sh/sembuf.h
rename to arch/sh/include/asm/sembuf.h
diff --git a/include/asm-sh/serial.h b/arch/sh/include/asm/serial.h
similarity index 95%
rename from include/asm-sh/serial.h
rename to arch/sh/include/asm/serial.h
index 21f6d33..e13cc94 100644
--- a/include/asm-sh/serial.h
+++ b/arch/sh/include/asm/serial.h
@@ -21,7 +21,7 @@
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
+#include <asm/hd64465/hd64465.h>
#define SERIAL_PORT_DFNS \
/* UART CLK PORT IRQ FLAGS */ \
diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h
similarity index 100%
rename from include/asm-sh/setup.h
rename to arch/sh/include/asm/setup.h
diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
similarity index 100%
rename from include/asm-sh/sfp-machine.h
rename to arch/sh/include/asm/sfp-machine.h
diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
similarity index 100%
rename from include/asm-sh/sh7760fb.h
rename to arch/sh/include/asm/sh7760fb.h
diff --git a/include/asm-sh/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
similarity index 100%
rename from include/asm-sh/sh7763rdp.h
rename to arch/sh/include/asm/sh7763rdp.h
diff --git a/include/asm-sh/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
similarity index 100%
rename from include/asm-sh/sh7785lcr.h
rename to arch/sh/include/asm/sh7785lcr.h
diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h
similarity index 100%
rename from include/asm-sh/sh_bios.h
rename to arch/sh/include/asm/sh_bios.h
diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
similarity index 100%
rename from include/asm-sh/sh_keysc.h
rename to arch/sh/include/asm/sh_keysc.h
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
similarity index 100%
rename from include/asm-sh/sh_mobile_lcdc.h
rename to arch/sh/include/asm/sh_mobile_lcdc.h
diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-sh/shmbuf.h
rename to arch/sh/include/asm/shmbuf.h
diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h
similarity index 100%
rename from include/asm-sh/shmin.h
rename to arch/sh/include/asm/shmin.h
diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h
similarity index 100%
rename from include/asm-sh/shmparam.h
rename to arch/sh/include/asm/shmparam.h
diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h
similarity index 100%
rename from include/asm-sh/sigcontext.h
rename to arch/sh/include/asm/sigcontext.h
diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h
similarity index 100%
rename from include/asm-sh/siginfo.h
rename to arch/sh/include/asm/siginfo.h
diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h
similarity index 100%
rename from include/asm-sh/signal.h
rename to arch/sh/include/asm/signal.h
diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
similarity index 100%
rename from include/asm-sh/smc37c93x.h
rename to arch/sh/include/asm/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h
similarity index 100%
rename from include/asm-sh/smp.h
rename to arch/sh/include/asm/smp.h
diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h
similarity index 100%
rename from include/asm-sh/snapgear.h
rename to arch/sh/include/asm/snapgear.h
diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h
similarity index 100%
rename from include/asm-sh/socket.h
rename to arch/sh/include/asm/socket.h
diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h
similarity index 100%
rename from include/asm-sh/sockios.h
rename to arch/sh/include/asm/sockios.h
diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h
similarity index 100%
rename from include/asm-sh/sparsemem.h
rename to arch/sh/include/asm/sparsemem.h
diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h
similarity index 100%
rename from include/asm-sh/spi.h
rename to arch/sh/include/asm/spi.h
diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h
similarity index 100%
rename from include/asm-sh/spinlock.h
rename to arch/sh/include/asm/spinlock.h
diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
similarity index 100%
rename from include/asm-sh/spinlock_types.h
rename to arch/sh/include/asm/spinlock_types.h
diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h
similarity index 100%
rename from include/asm-sh/stat.h
rename to arch/sh/include/asm/stat.h
diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h
similarity index 100%
rename from include/asm-sh/statfs.h
rename to arch/sh/include/asm/statfs.h
diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h
similarity index 100%
rename from include/asm-sh/string.h
rename to arch/sh/include/asm/string.h
diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h
similarity index 100%
rename from include/asm-sh/string_32.h
rename to arch/sh/include/asm/string_32.h
diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h
similarity index 100%
rename from include/asm-sh/string_64.h
rename to arch/sh/include/asm/string_64.h
diff --git a/include/asm-sh/system.h b/arch/sh/include/asm/system.h
similarity index 100%
rename from include/asm-sh/system.h
rename to arch/sh/include/asm/system.h
diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h
similarity index 100%
rename from include/asm-sh/system_32.h
rename to arch/sh/include/asm/system_32.h
diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h
similarity index 100%
rename from include/asm-sh/system_64.h
rename to arch/sh/include/asm/system_64.h
diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h
similarity index 100%
rename from include/asm-sh/systemh7751.h
rename to arch/sh/include/asm/systemh7751.h
diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h
similarity index 100%
rename from include/asm-sh/termbits.h
rename to arch/sh/include/asm/termbits.h
diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h
similarity index 100%
rename from include/asm-sh/termios.h
rename to arch/sh/include/asm/termios.h
diff --git a/include/asm-sh/thread_info.h b/arch/sh/include/asm/thread_info.h
similarity index 100%
rename from include/asm-sh/thread_info.h
rename to arch/sh/include/asm/thread_info.h
diff --git a/include/asm-sh/timer.h b/arch/sh/include/asm/timer.h
similarity index 96%
rename from include/asm-sh/timer.h
rename to arch/sh/include/asm/timer.h
index 327f7eb..a7ca3a1 100644
--- a/include/asm-sh/timer.h
+++ b/arch/sh/include/asm/timer.h
@@ -3,7 +3,7 @@
#include <linux/sysdev.h>
#include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
struct sys_timer_ops {
int (*init)(void);
diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h
similarity index 100%
rename from include/asm-sh/timex.h
rename to arch/sh/include/asm/timex.h
diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h
similarity index 100%
rename from include/asm-sh/titan.h
rename to arch/sh/include/asm/titan.h
diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h
similarity index 100%
rename from include/asm-sh/tlb.h
rename to arch/sh/include/asm/tlb.h
diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h
similarity index 100%
rename from include/asm-sh/tlb_64.h
rename to arch/sh/include/asm/tlb_64.h
diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-sh/tlbflush.h
rename to arch/sh/include/asm/tlbflush.h
diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h
similarity index 100%
rename from include/asm-sh/topology.h
rename to arch/sh/include/asm/topology.h
diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h
similarity index 100%
rename from include/asm-sh/types.h
rename to arch/sh/include/asm/types.h
diff --git a/include/asm-sh/uaccess.h b/arch/sh/include/asm/uaccess.h
similarity index 97%
rename from include/asm-sh/uaccess.h
rename to arch/sh/include/asm/uaccess.h
index 45c2c9b..075848f 100644
--- a/include/asm-sh/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -77,8 +77,9 @@
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = x; \
__chk_user_ptr(ptr); \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
__pu_err; \
})
@@ -86,8 +87,9 @@
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = x; \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \
- __put_user_size((x), __pu_addr, (size), \
+ __put_user_size(__pu_val, __pu_addr, (size), \
__pu_err); \
__pu_err; \
})
diff --git a/include/asm-sh/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
similarity index 98%
rename from include/asm-sh/uaccess_32.h
rename to arch/sh/include/asm/uaccess_32.h
index 892fd6d..ae0d24f 100644
--- a/include/asm-sh/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -76,8 +76,7 @@
__put_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
- __put_user_asm((u32)x, ptr, \
- retval, "l"); \
+ __put_user_asm(x, ptr, retval, "l"); \
break; \
case 8: \
__put_user_u64(x, ptr, retval); \
diff --git a/include/asm-sh/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
similarity index 100%
rename from include/asm-sh/uaccess_64.h
rename to arch/sh/include/asm/uaccess_64.h
diff --git a/include/asm-sh/ubc.h b/arch/sh/include/asm/ubc.h
similarity index 97%
rename from include/asm-sh/ubc.h
rename to arch/sh/include/asm/ubc.h
index 56f4e30..a7b9028 100644
--- a/include/asm-sh/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -12,7 +12,7 @@
#define __ASM_SH_UBC_H
#ifdef __KERNEL__
-#include <asm/cpu/ubc.h>
+#include <cpu/ubc.h>
/* User Break Controller */
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h
similarity index 100%
rename from include/asm-sh/ucontext.h
rename to arch/sh/include/asm/ucontext.h
diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h
similarity index 100%
rename from include/asm-sh/unaligned.h
rename to arch/sh/include/asm/unaligned.h
diff --git a/include/asm-sh/unistd.h b/arch/sh/include/asm/unistd.h
similarity index 100%
rename from include/asm-sh/unistd.h
rename to arch/sh/include/asm/unistd.h
diff --git a/include/asm-sh/unistd_32.h b/arch/sh/include/asm/unistd_32.h
similarity index 100%
rename from include/asm-sh/unistd_32.h
rename to arch/sh/include/asm/unistd_32.h
diff --git a/include/asm-sh/unistd_64.h b/arch/sh/include/asm/unistd_64.h
similarity index 100%
rename from include/asm-sh/unistd_64.h
rename to arch/sh/include/asm/unistd_64.h
diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h
similarity index 100%
rename from include/asm-sh/user.h
rename to arch/sh/include/asm/user.h
diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h
similarity index 100%
rename from include/asm-sh/vga.h
rename to arch/sh/include/asm/vga.h
diff --git a/include/asm-sh/watchdog.h b/arch/sh/include/asm/watchdog.h
similarity index 96%
rename from include/asm-sh/watchdog.h
rename to arch/sh/include/asm/watchdog.h
index d19ea62..f024fed 100644
--- a/include/asm-sh/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -13,11 +13,11 @@
#ifdef __KERNEL__
#include <linux/types.h>
-#include <asm/cpu/watchdog.h>
+#include <cpu/watchdog.h>
#include <asm/io.h>
/*
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
*/
#ifndef WTCNT_R
# define WTCNT_R WTCNT
diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h
similarity index 100%
rename from include/asm-sh/xor.h
rename to arch/sh/include/asm/xor.h
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/addrspace.h
rename to arch/sh/include/cpu-common/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
similarity index 99%
rename from include/asm-sh/cpu-sh2/cacheflush.h
rename to arch/sh/include/cpu-common/cpu/cacheflush.h
index 2979efb..c3db00b 100644
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -10,7 +10,7 @@
#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
#define __ASM_CPU_SH2_CACHEFLUSH_H
-/*
+/*
* Cache flushing:
*
* - flush_cache_all() flushes entire cache
@@ -40,5 +40,5 @@
#define flush_cache_sigtramp(vaddr) do { } while (0)
#define p3_cache_init() do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/mmu_context.h
rename to arch/sh/include/cpu-common/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/rtc.h
rename to arch/sh/include/cpu-common/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/sigcontext.h
rename to arch/sh/include/cpu-common/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/timer.h
rename to arch/sh/include/cpu-common/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/cache.h
rename to arch/sh/include/cpu-sh2/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/dma.h
rename to arch/sh/include/cpu-sh2/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/freq.h
rename to arch/sh/include/cpu-sh2/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/ubc.h
rename to arch/sh/include/cpu-sh2/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
similarity index 100%
rename from include/asm-sh/cpu-sh2/watchdog.h
rename to arch/sh/include/cpu-sh2/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
similarity index 100%
rename from include/asm-sh/cpu-sh2a/cache.h
rename to arch/sh/include/cpu-sh2a/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 0000000..27a13ef
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
similarity index 100%
rename from include/asm-sh/cpu-sh2a/freq.h
rename to arch/sh/include/cpu-sh2a/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
similarity index 100%
rename from include/asm-sh/cpu-sh2a/rtc.h
rename to arch/sh/include/cpu-sh2a/cpu/rtc.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 0000000..8ce2fc1c
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 0000000..e7e8259
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/adc.h
rename to arch/sh/include/cpu-sh3/cpu/adc.h
diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/cache.h
rename to arch/sh/include/cpu-sh3/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 0000000..abc9098
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/dac.h
rename to arch/sh/include/cpu-sh3/cpu/dac.h
diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/dma.h
rename to arch/sh/include/cpu-sh3/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/freq.h
rename to arch/sh/include/cpu-sh3/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/gpio.h
rename to arch/sh/include/cpu-sh3/cpu/gpio.h
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/mmu_context.h
rename to arch/sh/include/cpu-sh3/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/timer.h
rename to arch/sh/include/cpu-sh3/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/ubc.h
rename to arch/sh/include/cpu-sh3/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
similarity index 100%
rename from include/asm-sh/cpu-sh3/watchdog.h
rename to arch/sh/include/cpu-sh3/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/addrspace.h
rename to arch/sh/include/cpu-sh4/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/cache.h
rename to arch/sh/include/cpu-sh4/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/cacheflush.h
rename to arch/sh/include/cpu-sh4/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/dma-sh7780.h
rename to arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
diff --git a/include/asm-sh/cpu-sh4/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
similarity index 97%
rename from include/asm-sh/cpu-sh4/dma.h
rename to arch/sh/include/cpu-sh4/cpu/dma.h
index aaf71b0..235b7cd 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -20,7 +20,7 @@
#define CHCR_TS_MASK 0x18
#define CHCR_TS_SHIFT 3
-#include <asm/cpu/dma-sh7780.h>
+#include <cpu/dma-sh7780.h>
#else
#define SH_DMAC_BASE 0xffa00000
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/fpu.h
rename to arch/sh/include/cpu-sh4/cpu/fpu.h
diff --git a/include/asm-sh/cpu-sh4/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/freq.h
rename to arch/sh/include/cpu-sh4/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/mmu_context.h
rename to arch/sh/include/cpu-sh4/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/rtc.h
rename to arch/sh/include/cpu-sh4/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/sigcontext.h
rename to arch/sh/include/cpu-sh4/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/sq.h
rename to arch/sh/include/cpu-sh4/cpu/sq.h
diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/timer.h
rename to arch/sh/include/cpu-sh4/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/ubc.h
rename to arch/sh/include/cpu-sh4/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
similarity index 100%
rename from include/asm-sh/cpu-sh4/watchdog.h
rename to arch/sh/include/cpu-sh4/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/addrspace.h
rename to arch/sh/include/cpu-sh5/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/cache.h
rename to arch/sh/include/cpu-sh5/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/cacheflush.h
rename to arch/sh/include/cpu-sh5/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/dma.h
rename to arch/sh/include/cpu-sh5/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/irq.h
rename to arch/sh/include/cpu-sh5/cpu/irq.h
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/mmu_context.h
rename to arch/sh/include/cpu-sh5/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/registers.h
rename to arch/sh/include/cpu-sh5/cpu/registers.h
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
similarity index 100%
rename from include/asm-sh/cpu-sh5/rtc.h
rename to arch/sh/include/cpu-sh5/cpu/rtc.h
diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
similarity index 100%
rename from include/asm-sh/dreamcast/dma.h
rename to arch/sh/include/mach-dreamcast/mach/dma.h
diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
similarity index 100%
rename from include/asm-sh/dreamcast/maple.h
rename to arch/sh/include/mach-dreamcast/mach/maple.h
diff --git a/include/asm-sh/dreamcast/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
similarity index 93%
rename from include/asm-sh/dreamcast/pci.h
rename to arch/sh/include/mach-dreamcast/mach/pci.h
index e401b24..75fc900 100644
--- a/include/asm-sh/dreamcast/pci.h
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -11,7 +11,7 @@
#ifndef __ASM_SH_DREAMCAST_PCI_H
#define __ASM_SH_DREAMCAST_PCI_H
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
#define GAPSPCI_REGS 0x01001400
#define GAPSPCI_DMA_BASE 0x01840000
diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
similarity index 100%
rename from include/asm-sh/dreamcast/sysasic.h
rename to arch/sh/include/mach-dreamcast/mach/sysasic.h
diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
similarity index 100%
rename from include/asm-sh/landisk/gio.h
rename to arch/sh/include/mach-landisk/mach/gio.h
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
similarity index 100%
rename from include/asm-sh/landisk/iodata_landisk.h
rename to arch/sh/include/mach-landisk/mach/iodata_landisk.h
diff --git a/include/asm-sh/se.h b/arch/sh/include/mach-se/mach/se.h
similarity index 100%
rename from include/asm-sh/se.h
rename to arch/sh/include/mach-se/mach/se.h
diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
similarity index 100%
rename from include/asm-sh/se7206.h
rename to arch/sh/include/mach-se/mach/se7206.h
diff --git a/include/asm-sh/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
similarity index 100%
rename from include/asm-sh/se7343.h
rename to arch/sh/include/mach-se/mach/se7343.h
diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
similarity index 100%
rename from include/asm-sh/se7721.h
rename to arch/sh/include/mach-se/mach/se7721.h
diff --git a/include/asm-sh/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
similarity index 100%
rename from include/asm-sh/se7722.h
rename to arch/sh/include/mach-se/mach/se7722.h
diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
similarity index 100%
rename from include/asm-sh/se7751.h
rename to arch/sh/include/mach-se/mach/se7751.h
diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
similarity index 100%
rename from include/asm-sh/se7780.h
rename to arch/sh/include/mach-se/mach/se7780.h
diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h
similarity index 100%
rename from include/asm-sh/sh03/io.h
rename to arch/sh/include/mach-sh03/mach/io.h
diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
similarity index 100%
rename from include/asm-sh/sh03/sh03.h
rename to arch/sh/include/mach-sh03/mach/sh03.h
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index d3d9f32..bea4033 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#endif
/*
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47..726f033 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/page.h>
/*
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index ee894e5..becc54c45 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -14,7 +14,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index 47096dc..ab3903e 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -14,7 +14,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073..3fe482d 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/page.h>
! NOTE:
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796..2d452f6 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337..828cb57 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
* and Kamel Khelifi <kamel.khelifi@st.com>
*/
#include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
#define LIT64( a ) a##LL
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02..dcdf959 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
#include <linux/io.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
struct sq_mapping;
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed..ca08e7f 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -11,7 +11,7 @@
*/
#include <linux/errno.h>
#include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#include <asm/processor.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0..7ccfb99 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
#include <asm/thread_info.h>
/*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e4..64b7690 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
#include <asm/machvec.h>
#include <asm/uaccess.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
atomic_t irq_err_count;
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f..791edab 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h> /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
#include <asm/addrspace.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2..da32ba7 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
#include <linux/kernel.h>
#include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/* THIS IS A PHYSICAL ADDRESS */
#define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d537..bd63b96 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/* Callable from fault.c, so not static */
inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 567516b..b5d202b 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -10,7 +10,7 @@
# Shamelessly cloned from ARM.
#
-include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
+arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+ $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490..d741f35 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@
if (tty == NULL)
return IRQ_NONE;
- if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
- (tty->ldisc.write_wakeup != NULL))
- (tty->ldisc.write_wakeup)(tty);
-
- /*
- * BLOCKING mode
- * In blocking mode, everything sleeps on tty->write_wait.
- * Sleeping in the console driver would break non-blocking
- * writes.
- */
-
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
return IRQ_HANDLED;
}
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5..eaff0bb 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@
{
return uv_system_type != UV_NONE;
}
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 8dbffb8..87d4d69 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -123,6 +123,14 @@
pci_swiotlb_init();
}
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+ unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+ return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
#endif
/*
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b520dae..2d88858 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -788,10 +788,6 @@
initmem_init(0, max_pfn);
-#ifdef CONFIG_X86_64
- dma32_reserve_bootmem();
-#endif
-
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
@@ -806,6 +802,15 @@
#endif
reserve_crashkernel();
+#ifdef CONFIG_X86_64
+ /*
+ * dma32_reserve_bootmem() allocates bootmem which may conflict
+ * with the crashkernel command line, so do that after
+ * reserve_crashkernel()
+ */
+ dma32_reserve_bootmem();
+#endif
+
reserve_ibft_region();
#ifdef CONFIG_KVM_CLOCK
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428..f118c11 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
jnz 100b
102:
.section .fixup,"ax"
-103: addl %r8d,%edx /* ecx is zerorest also */
+103: addl %ecx,%edx /* ecx is zerorest also */
jmp copy_user_handle_tail
.previous
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e30..cb0c112 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
jnz 100b
102:
.section .fixup,"ax"
-103: addl %r8d,%edx /* ecx is zerorest also */
+103: addl %ecx,%edx /* ecx is zerorest also */
jmp copy_user_handle_tail
.previous
@@ -108,7 +108,6 @@
jmp 60f
50: movl %ecx,%edx
60: sfence
- movl %r8d,%ecx
jmp copy_user_handle_tail
.previous
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index b474996..0133af4 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -64,7 +64,13 @@
* policy is adjusted accordingly.
*/
-static unsigned int ignore_ppc = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ * ignore _PPC
+ * 0 -> cpufreq low level drivers initialized -> consider _PPC values
+ * 1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static unsigned int ignore_ppc = -1;
module_param(ignore_ppc, uint, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
@@ -72,7 +78,7 @@
#define PPC_REGISTERED 1
#define PPC_IN_USE 2
-static int acpi_processor_ppc_status = 0;
+static int acpi_processor_ppc_status;
static int acpi_processor_ppc_notifier(struct notifier_block *nb,
unsigned long event, void *data)
@@ -81,13 +87,18 @@
struct acpi_processor *pr;
unsigned int ppc = 0;
+ if (event == CPUFREQ_START && ignore_ppc <= 0) {
+ ignore_ppc = 0;
+ return 0;
+ }
+
if (ignore_ppc)
return 0;
- mutex_lock(&performance_mutex);
-
if (event != CPUFREQ_INCOMPATIBLE)
- goto out;
+ return 0;
+
+ mutex_lock(&performance_mutex);
pr = per_cpu(processors, policy->cpu);
if (!pr || !pr->performance)
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 71ec426..1e0455b 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -39,8 +39,8 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
#define GDROM_DEV_NAME "gdrom"
#define GD_SESSION_OFFSET 150
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1926883..f52931e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
#include <linux/ctype.h>
#ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
#endif
#define PFX "ipmi_si: "
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e30575e..b638403 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1612,8 +1612,10 @@
switch (cmd) {
case MOXA_GET_MAJOR:
- printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
- "your userspace\n", current->comm, cmd);
+ if (printk_ratelimit())
+ printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+ "%x (GET_MAJOR), fix your userspace\n",
+ current->comm, cmd);
return put_user(ttymajor, (int __user *)argp);
case MOXA_CHKPORTENABLE:
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d6a3ff..8a67f16 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@
policy->user_policy.min = policy->cpuinfo.min_freq;
policy->user_policy.max = policy->cpuinfo.max_freq;
+ blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+ CPUFREQ_START, policy);
+
#ifdef CONFIG_SMP
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 11f1744..d53fbbf 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -81,4 +81,3 @@
if (ibft_addr)
reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
}
-EXPORT_SYMBOL_GPL(reserve_ibft_region);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6..fa2be26 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@
/* Make sure we have sane timings */
sanitize_timings(pmif);
+ host = ide_host_alloc(&d, hws);
+ if (host == NULL)
+ return -ENOMEM;
+ hwif = host->ports[0];
+
#ifndef CONFIG_PPC64
/* XXX FIXME: Media bay stuff need re-organizing */
if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@
pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hw->irq);
- rc = ide_host_add(&d, hws, &host);
- if (rc)
+ rc = ide_host_register(host, &d, hws);
+ if (rc) {
+ ide_host_free(host);
return rc;
-
- hwif = host->ports[0];
+ }
return 0;
}
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 2b40428..7797ef6 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -27,7 +27,6 @@
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/maple.h>
-#include <asm/mach/maple.h>
/* Very simple mutex to ensure proper cleanup */
static DEFINE_MUTEX(maple_keyb_mutex);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f5ade19..fa50e9e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -426,7 +426,7 @@
config SGI_XP
tristate "Support communication between SGI SSIs"
- depends on IA64_GENERIC || IA64_SGI_SN2
+ depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP)
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
---help---
@@ -450,4 +450,27 @@
To compile this driver as a module, choose M here: the
module will be called hpilo.
+config SGI_GRU
+ tristate "SGI GRU driver"
+ depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+ default n
+ select MMU_NOTIFIER
+ ---help---
+ The GRU is a hardware resource located in the system chipset. The GRU
+ contains memory that can be mmapped into the user address space. This memory is
+ used to communicate with the GRU to perform functions such as load/store,
+ scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
+ instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+ user virtual addresses for operands.
+
+ If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+ bool "SGI GRU driver debug"
+ depends on SGI_GRU
+ default n
+ ---help---
+ This option enables addition debugging code for the SGI GRU driver. If
+ you are unsure, say N.
+
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5e2734..c6c13f6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,4 +28,5 @@
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
+obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
new file mode 100644
index 0000000..d03597a
--- /dev/null
+++ b/drivers/misc/sgi-gru/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SGI_GRU) := gru.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
+
diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h
new file mode 100644
index 0000000..40df7cb
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __GRU_H__
+#define __GRU_H__
+
+/*
+ * GRU architectural definitions
+ */
+#define GRU_CACHE_LINE_BYTES 64
+#define GRU_HANDLE_STRIDE 256
+#define GRU_CB_BASE 0
+#define GRU_DS_BASE 0x20000
+
+/*
+ * Size used to map GRU GSeg
+ */
+#if defined CONFIG_IA64
+#define GRU_GSEG_PAGESIZE (256 * 1024UL)
+#elif defined CONFIG_X86_64
+#define GRU_GSEG_PAGESIZE (256 * 1024UL) /* ZZZ 2MB ??? */
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Structure for obtaining GRU resource information
+ */
+struct gru_chiplet_info {
+ int node;
+ int chiplet;
+ int blade;
+ int total_dsr_bytes;
+ int total_cbr;
+ int total_user_dsr_bytes;
+ int total_user_cbr;
+ int free_user_dsr_bytes;
+ int free_user_cbr;
+};
+
+/* Flags for GRU options on the gru_create_context() call */
+/* Select one of the follow 4 options to specify how TLB misses are handled */
+#define GRU_OPT_MISS_DEFAULT 0x0000 /* Use default mode */
+#define GRU_OPT_MISS_USER_POLL 0x0001 /* User will poll CB for faults */
+#define GRU_OPT_MISS_FMM_INTR 0x0002 /* Send interrupt to cpu to
+ handle fault */
+#define GRU_OPT_MISS_FMM_POLL 0x0003 /* Use system polling thread */
+#define GRU_OPT_MISS_MASK 0x0003 /* Mask for TLB MISS option */
+
+
+
+#endif /* __GRU_H__ */
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
new file mode 100644
index 0000000..0dc3622
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -0,0 +1,669 @@
+/*
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __GRU_INSTRUCTIONS_H__
+#define __GRU_INSTRUCTIONS_H__
+
+#define gru_flush_cache_hook(p)
+#define gru_emulator_wait_hook(p, w)
+
+/*
+ * Architecture dependent functions
+ */
+
+#if defined CONFIG_IA64
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+#define __flush_cache(p) ia64_fc(p)
+/* Use volatile on IA64 to ensure ordering via st4.rel */
+#define gru_ordered_store_int(p,v) \
+ do { \
+ barrier(); \
+ *((volatile int *)(p)) = v; /* force st.rel */ \
+ } while (0)
+#elif defined CONFIG_X86_64
+#define __flush_cache(p) clflush(p)
+#define gru_ordered_store_int(p,v) \
+ do { \
+ barrier(); \
+ *(int *)p = v; \
+ } while (0)
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Control block status and exception codes
+ */
+#define CBS_IDLE 0
+#define CBS_EXCEPTION 1
+#define CBS_ACTIVE 2
+#define CBS_CALL_OS 3
+
+/* CB substatus bitmasks */
+#define CBSS_MSG_QUEUE_MASK 7
+#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK 8
+
+/* CB substatus message queue values (low 3 bits of substatus) */
+#define CBSS_NO_ERROR 0
+#define CBSS_LB_OVERFLOWED 1
+#define CBSS_QLIMIT_REACHED 2
+#define CBSS_PAGE_OVERFLOW 3
+#define CBSS_AMO_NACKED 4
+#define CBSS_PUT_NACKED 5
+
+/*
+ * Structure used to fetch exception detail for CBs that terminate with
+ * CBS_EXCEPTION
+ */
+struct control_block_extended_exc_detail {
+ unsigned long cb;
+ int opc;
+ int ecause;
+ int exopc;
+ long exceptdet0;
+ int exceptdet1;
+};
+
+/*
+ * Instruction formats
+ */
+
+/*
+ * Generic instruction format.
+ * This definition has precise bit field definitions.
+ */
+struct gru_instruction_bits {
+ /* DW 0 - low */
+ unsigned int icmd: 1;
+ unsigned char ima: 3; /* CB_DelRep, unmapped mode */
+ unsigned char reserved0: 4;
+ unsigned int xtype: 3;
+ unsigned int iaa0: 2;
+ unsigned int iaa1: 2;
+ unsigned char reserved1: 1;
+ unsigned char opc: 8; /* opcode */
+ unsigned char exopc: 8; /* extended opcode */
+ /* DW 0 - high */
+ unsigned int idef2: 22; /* TRi0 */
+ unsigned char reserved2: 2;
+ unsigned char istatus: 2;
+ unsigned char isubstatus:4;
+ unsigned char reserved3: 2;
+ /* DW 1 */
+ unsigned long idef4; /* 42 bits: TRi1, BufSize */
+ /* DW 2-6 */
+ unsigned long idef1; /* BAddr0 */
+ unsigned long idef5; /* Nelem */
+ unsigned long idef6; /* Stride, Operand1 */
+ unsigned long idef3; /* BAddr1, Value, Operand2 */
+ unsigned long reserved4;
+ /* DW 7 */
+ unsigned long avalue; /* AValue */
+};
+
+/*
+ * Generic instruction with friendlier names. This format is used
+ * for inline instructions.
+ */
+struct gru_instruction {
+ /* DW 0 */
+ unsigned int op32; /* icmd,xtype,iaa0,ima,opc */
+ unsigned int tri0;
+ unsigned long tri1_bufsize; /* DW 1 */
+ unsigned long baddr0; /* DW 2 */
+ unsigned long nelem; /* DW 3 */
+ unsigned long op1_stride; /* DW 4 */
+ unsigned long op2_value_baddr1; /* DW 5 */
+ unsigned long reserved0; /* DW 6 */
+ unsigned long avalue; /* DW 7 */
+};
+
+/* Some shifts and masks for the low 32 bits of a GRU command */
+#define GRU_CB_ICMD_SHFT 0
+#define GRU_CB_ICMD_MASK 0x1
+#define GRU_CB_XTYPE_SHFT 8
+#define GRU_CB_XTYPE_MASK 0x7
+#define GRU_CB_IAA0_SHFT 11
+#define GRU_CB_IAA0_MASK 0x3
+#define GRU_CB_IAA1_SHFT 13
+#define GRU_CB_IAA1_MASK 0x3
+#define GRU_CB_IMA_SHFT 1
+#define GRU_CB_IMA_MASK 0x3
+#define GRU_CB_OPC_SHFT 16
+#define GRU_CB_OPC_MASK 0xff
+#define GRU_CB_EXOPC_SHFT 24
+#define GRU_CB_EXOPC_MASK 0xff
+
+/* GRU instruction opcodes (opc field) */
+#define OP_NOP 0x00
+#define OP_BCOPY 0x01
+#define OP_VLOAD 0x02
+#define OP_IVLOAD 0x03
+#define OP_VSTORE 0x04
+#define OP_IVSTORE 0x05
+#define OP_VSET 0x06
+#define OP_IVSET 0x07
+#define OP_MESQ 0x08
+#define OP_GAMXR 0x09
+#define OP_GAMIR 0x0a
+#define OP_GAMIRR 0x0b
+#define OP_GAMER 0x0c
+#define OP_GAMERR 0x0d
+#define OP_BSTORE 0x0e
+#define OP_VFLUSH 0x0f
+
+
+/* Extended opcodes values (exopc field) */
+
+/* GAMIR - AMOs with implicit operands */
+#define EOP_IR_FETCH 0x01 /* Plain fetch of memory */
+#define EOP_IR_CLR 0x02 /* Fetch and clear */
+#define EOP_IR_INC 0x05 /* Fetch and increment */
+#define EOP_IR_DEC 0x07 /* Fetch and decrement */
+#define EOP_IR_QCHK1 0x0d /* Queue check, 64 byte msg */
+#define EOP_IR_QCHK2 0x0e /* Queue check, 128 byte msg */
+
+/* GAMIRR - Registered AMOs with implicit operands */
+#define EOP_IRR_FETCH 0x01 /* Registered fetch of memory */
+#define EOP_IRR_CLR 0x02 /* Registered fetch and clear */
+#define EOP_IRR_INC 0x05 /* Registered fetch and increment */
+#define EOP_IRR_DEC 0x07 /* Registered fetch and decrement */
+#define EOP_IRR_DECZ 0x0f /* Registered fetch and decrement, update on zero*/
+
+/* GAMER - AMOs with explicit operands */
+#define EOP_ER_SWAP 0x00 /* Exchange argument and memory */
+#define EOP_ER_OR 0x01 /* Logical OR with memory */
+#define EOP_ER_AND 0x02 /* Logical AND with memory */
+#define EOP_ER_XOR 0x03 /* Logical XOR with memory */
+#define EOP_ER_ADD 0x04 /* Add value to memory */
+#define EOP_ER_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ER_CADD 0x0c /* Queue check, operand1*64 byte msg */
+
+/* GAMERR - Registered AMOs with explicit operands */
+#define EOP_ERR_SWAP 0x00 /* Exchange argument and memory */
+#define EOP_ERR_OR 0x01 /* Logical OR with memory */
+#define EOP_ERR_AND 0x02 /* Logical AND with memory */
+#define EOP_ERR_XOR 0x03 /* Logical XOR with memory */
+#define EOP_ERR_ADD 0x04 /* Add value to memory */
+#define EOP_ERR_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ERR_EPOLL 0x09 /* Poll for equality */
+#define EOP_ERR_NPOLL 0x0a /* Poll for inequality */
+
+/* GAMXR - SGI Arithmetic unit */
+#define EOP_XR_CSWAP 0x0b /* Masked compare exchange */
+
+
+/* Transfer types (xtype field) */
+#define XTYPE_B 0x0 /* byte */
+#define XTYPE_S 0x1 /* short (2-byte) */
+#define XTYPE_W 0x2 /* word (4-byte) */
+#define XTYPE_DW 0x3 /* doubleword (8-byte) */
+#define XTYPE_CL 0x6 /* cacheline (64-byte) */
+
+
+/* Instruction access attributes (iaa0, iaa1 fields) */
+#define IAA_RAM 0x0 /* normal cached RAM access */
+#define IAA_NCRAM 0x2 /* noncoherent RAM access */
+#define IAA_MMIO 0x1 /* noncoherent memory-mapped I/O space */
+#define IAA_REGISTER 0x3 /* memory-mapped registers, etc. */
+
+
+/* Instruction mode attributes (ima field) */
+#define IMA_MAPPED 0x0 /* Virtual mode */
+#define IMA_CB_DELAY 0x1 /* hold read responses until status changes */
+#define IMA_UNMAPPED 0x2 /* bypass the TLBs (OS only) */
+#define IMA_INTERRUPT 0x4 /* Interrupt when instruction completes */
+
+/* CBE ecause bits */
+#define CBE_CAUSE_RI (1 << 0)
+#define CBE_CAUSE_INVALID_INSTRUCTION (1 << 1)
+#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN (1 << 2)
+#define CBE_CAUSE_PE_CHECK_DATA_ERROR (1 << 3)
+#define CBE_CAUSE_IAA_GAA_MISMATCH (1 << 4)
+#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION (1 << 5)
+#define CBE_CAUSE_OS_FATAL_TLB_FAULT (1 << 6)
+#define CBE_CAUSE_EXECUTION_HW_ERROR (1 << 7)
+#define CBE_CAUSE_TLBHW_ERROR (1 << 8)
+#define CBE_CAUSE_RA_REQUEST_TIMEOUT (1 << 9)
+#define CBE_CAUSE_HA_REQUEST_TIMEOUT (1 << 10)
+#define CBE_CAUSE_RA_RESPONSE_FATAL (1 << 11)
+#define CBE_CAUSE_RA_RESPONSE_NON_FATAL (1 << 12)
+#define CBE_CAUSE_HA_RESPONSE_FATAL (1 << 13)
+#define CBE_CAUSE_HA_RESPONSE_NON_FATAL (1 << 14)
+#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR (1 << 15)
+#define CBE_CAUSE_RESPONSE_DATA_ERROR (1 << 16)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR (1 << 17)
+
+/*
+ * Exceptions are retried for the following cases. If any OTHER bits are set
+ * in ecause, the exception is not retryable.
+ */
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR | \
+ CBE_CAUSE_RA_REQUEST_TIMEOUT | \
+ CBE_CAUSE_TLBHW_ERROR | \
+ CBE_CAUSE_HA_REQUEST_TIMEOUT)
+
+/* Message queue head structure */
+union gru_mesqhead {
+ unsigned long val;
+ struct {
+ unsigned int head;
+ unsigned int limit;
+ };
+};
+
+
+/* Generate the low word of a GRU instruction */
+static inline unsigned int
+__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype,
+ unsigned char iaa0, unsigned char iaa1,
+ unsigned char ima)
+{
+ return (1 << GRU_CB_ICMD_SHFT) |
+ (iaa0 << GRU_CB_IAA0_SHFT) |
+ (iaa1 << GRU_CB_IAA1_SHFT) |
+ (ima << GRU_CB_IMA_SHFT) |
+ (xtype << GRU_CB_XTYPE_SHFT) |
+ (opcode << GRU_CB_OPC_SHFT) |
+ (exopc << GRU_CB_EXOPC_SHFT);
+}
+
+/*
+ * Architecture specific intrinsics
+ */
+static inline void gru_flush_cache(void *p)
+{
+ __flush_cache(p);
+}
+
+/*
+ * Store the lower 32 bits of the command including the "start" bit. Then
+ * start the instruction executing.
+ */
+static inline void gru_start_instruction(struct gru_instruction *ins, int op32)
+{
+ gru_ordered_store_int(ins, op32);
+}
+
+
+/* Convert "hints" to IMA */
+#define CB_IMA(h) ((h) | IMA_UNMAPPED)
+
+/* Convert data segment cache line index into TRI0 / TRI1 value */
+#define GRU_DINDEX(i) ((i) * GRU_CACHE_LINE_BYTES)
+
+/* Inline functions for GRU instructions.
+ * Note:
+ * - nelem and stride are in elements
+ * - tri0/tri1 is in bytes for the beginning of the data segment.
+ */
+static inline void gru_vload(void *cb, unsigned long mem_addr,
+ unsigned int tri0, unsigned char xtype, unsigned long nelem,
+ unsigned long stride, unsigned long hints)
+{
+ struct gru_instruction *ins = (struct gru_instruction *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ ins->op1_stride = stride;
+ gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_vstore(void *cb, unsigned long mem_addr,
+ unsigned int tri0, unsigned char xtype, unsigned long nelem,
+ unsigned long stride, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ ins->op1_stride = stride;
+ gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_ivload(void *cb, unsigned long mem_addr,
+ unsigned int tri0, unsigned int tri1, unsigned char xtype,
+ unsigned long nelem, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ ins->tri1_bufsize = tri1;
+ gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_ivstore(void *cb, unsigned long mem_addr,
+ unsigned int tri0, unsigned int tri1,
+ unsigned char xtype, unsigned long nelem, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ ins->tri1_bufsize = tri1;
+ gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_vset(void *cb, unsigned long mem_addr,
+ unsigned long value, unsigned char xtype, unsigned long nelem,
+ unsigned long stride, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->op2_value_baddr1 = value;
+ ins->nelem = nelem;
+ ins->op1_stride = stride;
+ gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_ivset(void *cb, unsigned long mem_addr,
+ unsigned int tri1, unsigned long value, unsigned char xtype,
+ unsigned long nelem, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->op2_value_baddr1 = value;
+ ins->nelem = nelem;
+ ins->tri1_bufsize = tri1;
+ gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_vflush(void *cb, unsigned long mem_addr,
+ unsigned long nelem, unsigned char xtype, unsigned long stride,
+ unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)mem_addr;
+ ins->op1_stride = stride;
+ ins->nelem = nelem;
+ gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_nop(void *cb, int hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints)));
+}
+
+
+static inline void gru_bcopy(void *cb, const unsigned long src,
+ unsigned long dest,
+ unsigned int tri0, unsigned int xtype, unsigned long nelem,
+ unsigned int bufsize, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ ins->op2_value_baddr1 = (long)dest;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ ins->tri1_bufsize = bufsize;
+ gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM,
+ IAA_RAM, CB_IMA(hints)));
+}
+
+static inline void gru_bstore(void *cb, const unsigned long src,
+ unsigned long dest, unsigned int tri0, unsigned int xtype,
+ unsigned long nelem, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ ins->op2_value_baddr1 = (long)dest;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM,
+ CB_IMA(hints)));
+}
+
+static inline void gru_gamir(void *cb, int exopc, unsigned long src,
+ unsigned int xtype, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_gamirr(void *cb, int exopc, unsigned long src,
+ unsigned int xtype, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_gamer(void *cb, int exopc, unsigned long src,
+ unsigned int xtype,
+ unsigned long operand1, unsigned long operand2,
+ unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ ins->op1_stride = operand1;
+ ins->op2_value_baddr1 = operand2;
+ gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_gamerr(void *cb, int exopc, unsigned long src,
+ unsigned int xtype, unsigned long operand1,
+ unsigned long operand2, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ ins->op1_stride = operand1;
+ ins->op2_value_baddr1 = operand2;
+ gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline void gru_gamxr(void *cb, unsigned long src,
+ unsigned int tri0, unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)src;
+ ins->nelem = 4;
+ gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW,
+ IAA_RAM, 0, CB_IMA(hints)));
+}
+
+static inline void gru_mesq(void *cb, unsigned long queue,
+ unsigned long tri0, unsigned long nelem,
+ unsigned long hints)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ ins->baddr0 = (long)queue;
+ ins->nelem = nelem;
+ ins->tri0 = tri0;
+ gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0,
+ CB_IMA(hints)));
+}
+
+static inline unsigned long gru_get_amo_value(void *cb)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ return ins->avalue;
+}
+
+static inline int gru_get_amo_value_head(void *cb)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ return ins->avalue & 0xffffffff;
+}
+
+static inline int gru_get_amo_value_limit(void *cb)
+{
+ struct gru_instruction *ins = (void *)cb;
+
+ return ins->avalue >> 32;
+}
+
+static inline union gru_mesqhead gru_mesq_head(int head, int limit)
+{
+ union gru_mesqhead mqh;
+
+ mqh.head = head;
+ mqh.limit = limit;
+ return mqh;
+}
+
+/*
+ * Get struct control_block_extended_exc_detail for CB.
+ */
+extern int gru_get_cb_exception_detail(void *cb,
+ struct control_block_extended_exc_detail *excdet);
+
+#define GRU_EXC_STR_SIZE 256
+
+extern int gru_check_status_proc(void *cb);
+extern int gru_wait_proc(void *cb);
+extern void gru_wait_abort_proc(void *cb);
+
+/*
+ * Control block definition for checking status
+ */
+struct gru_control_block_status {
+ unsigned int icmd :1;
+ unsigned int unused1 :31;
+ unsigned int unused2 :24;
+ unsigned int istatus :2;
+ unsigned int isubstatus :4;
+ unsigned int inused3 :2;
+};
+
+/* Get CB status */
+static inline int gru_get_cb_status(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+
+ return cbs->istatus;
+}
+
+/* Get CB message queue substatus */
+static inline int gru_get_cb_message_queue_substatus(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+
+ return cbs->isubstatus & CBSS_MSG_QUEUE_MASK;
+}
+
+/* Get CB substatus */
+static inline int gru_get_cb_substatus(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+
+ return cbs->isubstatus;
+}
+
+/* Check the status of a CB. If the CB is in UPM mode, call the
+ * OS to handle the UPM status.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_check_status(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+ int ret = cbs->istatus;
+
+ if (ret == CBS_CALL_OS)
+ ret = gru_check_status_proc(cb);
+ return ret;
+}
+
+/* Wait for CB to complete.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_wait(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+ int ret = cbs->istatus;;
+
+ if (ret != CBS_IDLE)
+ ret = gru_wait_proc(cb);
+ return ret;
+}
+
+/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+ * mean TLB mis - only fatal errors such as memory parity error or user
+ * bugs will cause termination.
+ */
+static inline void gru_wait_abort(void *cb)
+{
+ struct gru_control_block_status *cbs = (void *)cb;
+
+ if (cbs->istatus != CBS_IDLE)
+ gru_wait_abort_proc(cb);
+}
+
+
+/*
+ * Get a pointer to a control block
+ * gseg - GSeg address returned from gru_get_thread_gru_segment()
+ * index - index of desired CB
+ */
+static inline void *gru_get_cb_pointer(void *gseg,
+ int index)
+{
+ return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE;
+}
+
+/*
+ * Get a pointer to a cacheline in the data segment portion of a GSeg
+ * gseg - GSeg address returned from gru_get_thread_gru_segment()
+ * index - index of desired cache line
+ */
+static inline void *gru_get_data_pointer(void *gseg, int index)
+{
+ return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES;
+}
+
+/*
+ * Convert a vaddr into the tri index within the GSEG
+ * vaddr - virtual address of within gseg
+ */
+static inline int gru_get_tri(void *vaddr)
+{
+ return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE;
+}
+#endif /* __GRU_INSTRUCTIONS_H__ */
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
new file mode 100644
index 0000000..3d33015
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -0,0 +1,633 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * FAULT HANDLER FOR GRU DETECTED TLB MISSES
+ *
+ * This file contains code that handles TLB misses within the GRU.
+ * These misses are reported either via interrupts or user polling of
+ * the user CB.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include "gru.h"
+#include "grutables.h"
+#include "grulib.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Test if a physical address is a valid GRU GSEG address
+ */
+static inline int is_gru_paddr(unsigned long paddr)
+{
+ return paddr >= gru_start_paddr && paddr < gru_end_paddr;
+}
+
+/*
+ * Find the vma of a GRU segment. Caller must hold mmap_sem.
+ */
+struct vm_area_struct *gru_find_vma(unsigned long vaddr)
+{
+ struct vm_area_struct *vma;
+
+ vma = find_vma(current->mm, vaddr);
+ if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops)
+ return vma;
+ return NULL;
+}
+
+/*
+ * Find and lock the gts that contains the specified user vaddr.
+ *
+ * Returns:
+ * - *gts with the mmap_sem locked for read and the GTS locked.
+ * - NULL if vaddr invalid OR is not a valid GSEG vaddr.
+ */
+
+static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ struct gru_thread_state *gts = NULL;
+
+ down_read(&mm->mmap_sem);
+ vma = gru_find_vma(vaddr);
+ if (vma)
+ gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+ if (gts)
+ mutex_lock(>s->ts_ctxlock);
+ else
+ up_read(&mm->mmap_sem);
+ return gts;
+}
+
+static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ struct gru_thread_state *gts = NULL;
+
+ down_write(&mm->mmap_sem);
+ vma = gru_find_vma(vaddr);
+ if (vma)
+ gts = gru_alloc_thread_state(vma, TSID(vaddr, vma));
+ if (gts) {
+ mutex_lock(>s->ts_ctxlock);
+ downgrade_write(&mm->mmap_sem);
+ } else {
+ up_write(&mm->mmap_sem);
+ }
+
+ return gts;
+}
+
+/*
+ * Unlock a GTS that was previously locked with gru_find_lock_gts().
+ */
+static void gru_unlock_gts(struct gru_thread_state *gts)
+{
+ mutex_unlock(>s->ts_ctxlock);
+ up_read(¤t->mm->mmap_sem);
+}
+
+/*
+ * Set a CB.istatus to active using a user virtual address. This must be done
+ * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY.
+ * If the line is evicted, the status may be lost. The in-cache update
+ * is necessary to prevent the user from seeing a stale cb.istatus that will
+ * change as soon as the TFH restart is complete. Races may cause an
+ * occasional failure to clear the cb.istatus, but that is ok.
+ *
+ * If the cb address is not valid (should not happen, but...), nothing
+ * bad will happen.. The get_user()/put_user() will fail but there
+ * are no bad side-effects.
+ */
+static void gru_cb_set_istatus_active(unsigned long __user *cb)
+{
+ union {
+ struct gru_instruction_bits bits;
+ unsigned long dw;
+ } u;
+
+ if (cb) {
+ get_user(u.dw, cb);
+ u.bits.istatus = CBS_ACTIVE;
+ put_user(u.dw, cb);
+ }
+}
+
+/*
+ * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
+ * interrupt. Interrupts are always sent to a cpu on the blade that contains the
+ * GRU (except for headless blades which are not currently supported). A blade
+ * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
+ * number uniquely identifies the GRU chiplet on the local blade that caused the
+ * interrupt. Always called in interrupt context.
+ */
+static inline struct gru_state *irq_to_gru(int irq)
+{
+ return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
+}
+
+/*
+ * Read & clear a TFM
+ *
+ * The GRU has an array of fault maps. A map is private to a cpu
+ * Only one cpu will be accessing a cpu's fault map.
+ *
+ * This function scans the cpu-private fault map & clears all bits that
+ * are set. The function returns a bitmap that indicates the bits that
+ * were cleared. Note that sense the maps may be updated asynchronously by
+ * the GRU, atomic operations must be used to clear bits.
+ */
+static void get_clear_fault_map(struct gru_state *gru,
+ struct gru_tlb_fault_map *map)
+{
+ unsigned long i, k;
+ struct gru_tlb_fault_map *tfm;
+
+ tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id());
+ prefetchw(tfm); /* Helps on hardware, required for emulator */
+ for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) {
+ k = tfm->fault_bits[i];
+ if (k)
+ k = xchg(&tfm->fault_bits[i], 0UL);
+ map->fault_bits[i] = k;
+ }
+
+ /*
+ * Not functionally required but helps performance. (Required
+ * on emulator)
+ */
+ gru_flush_cache(tfm);
+}
+
+/*
+ * Atomic (interrupt context) & non-atomic (user context) functions to
+ * convert a vaddr into a physical address. The size of the page
+ * is returned in pageshift.
+ * returns:
+ * 0 - successful
+ * < 0 - error code
+ * 1 - (atomic only) try again in non-atomic context
+ */
+static int non_atomic_pte_lookup(struct vm_area_struct *vma,
+ unsigned long vaddr, int write,
+ unsigned long *paddr, int *pageshift)
+{
+ struct page *page;
+
+ /* ZZZ Need to handle HUGE pages */
+ if (is_vm_hugetlb_page(vma))
+ return -EFAULT;
+ *pageshift = PAGE_SHIFT;
+ if (get_user_pages
+ (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0)
+ return -EFAULT;
+ *paddr = page_to_phys(page);
+ put_page(page);
+ return 0;
+}
+
+/*
+ *
+ * atomic_pte_lookup
+ *
+ * Convert a user virtual address to a physical address
+ * Only supports Intel large pages (2MB only) on x86_64.
+ * ZZZ - hugepage support is incomplete
+ */
+static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
+ int write, unsigned long *paddr, int *pageshift)
+{
+ pgd_t *pgdp;
+ pmd_t *pmdp;
+ pud_t *pudp;
+ pte_t pte;
+
+ WARN_ON(irqs_disabled()); /* ZZZ debug */
+
+ local_irq_disable();
+ pgdp = pgd_offset(vma->vm_mm, vaddr);
+ if (unlikely(pgd_none(*pgdp)))
+ goto err;
+
+ pudp = pud_offset(pgdp, vaddr);
+ if (unlikely(pud_none(*pudp)))
+ goto err;
+
+ pmdp = pmd_offset(pudp, vaddr);
+ if (unlikely(pmd_none(*pmdp)))
+ goto err;
+#ifdef CONFIG_X86_64
+ if (unlikely(pmd_large(*pmdp)))
+ pte = *(pte_t *) pmdp;
+ else
+#endif
+ pte = *pte_offset_kernel(pmdp, vaddr);
+
+ local_irq_enable();
+
+ if (unlikely(!pte_present(pte) ||
+ (write && (!pte_write(pte) || !pte_dirty(pte)))))
+ return 1;
+
+ *paddr = pte_pfn(pte) << PAGE_SHIFT;
+ *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+ return 0;
+
+err:
+ local_irq_enable();
+ return 1;
+}
+
+/*
+ * Drop a TLB entry into the GRU. The fault is described by info in an TFH.
+ * Input:
+ * cb Address of user CBR. Null if not running in user context
+ * Return:
+ * 0 = dropin, exception, or switch to UPM successful
+ * 1 = range invalidate active
+ * < 0 = error code
+ *
+ */
+static int gru_try_dropin(struct gru_thread_state *gts,
+ struct gru_tlb_fault_handle *tfh,
+ unsigned long __user *cb)
+{
+ struct mm_struct *mm = gts->ts_mm;
+ struct vm_area_struct *vma;
+ int pageshift, asid, write, ret;
+ unsigned long paddr, gpa, vaddr;
+
+ /*
+ * NOTE: The GRU contains magic hardware that eliminates races between
+ * TLB invalidates and TLB dropins. If an invalidate occurs
+ * in the window between reading the TFH and the subsequent TLB dropin,
+ * the dropin is ignored. This eliminates the need for additional locks.
+ */
+
+ /*
+ * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call.
+ * Might be a hardware race OR a stupid user. Ignore FMM because FMM
+ * is a transient state.
+ */
+ if (tfh->state == TFHSTATE_IDLE)
+ goto failidle;
+ if (tfh->state == TFHSTATE_MISS_FMM && cb)
+ goto failfmm;
+
+ write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0;
+ vaddr = tfh->missvaddr;
+ asid = tfh->missasid;
+ if (asid == 0)
+ goto failnoasid;
+
+ rmb(); /* TFH must be cache resident before reading ms_range_active */
+
+ /*
+ * TFH is cache resident - at least briefly. Fail the dropin
+ * if a range invalidate is active.
+ */
+ if (atomic_read(>s->ts_gms->ms_range_active))
+ goto failactive;
+
+ vma = find_vma(mm, vaddr);
+ if (!vma)
+ goto failinval;
+
+ /*
+ * Atomic lookup is faster & usually works even if called in non-atomic
+ * context.
+ */
+ ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift);
+ if (ret) {
+ if (!cb)
+ goto failupm;
+ if (non_atomic_pte_lookup(vma, vaddr, write, &paddr,
+ &pageshift))
+ goto failinval;
+ }
+ if (is_gru_paddr(paddr))
+ goto failinval;
+
+ paddr = paddr & ~((1UL << pageshift) - 1);
+ gpa = uv_soc_phys_ram_to_gpa(paddr);
+ gru_cb_set_istatus_active(cb);
+ tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write,
+ GRU_PAGESIZE(pageshift));
+ STAT(tlb_dropin);
+ gru_dbg(grudev,
+ "%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n",
+ ret ? "non-atomic" : "atomic", tfh, vaddr, asid,
+ pageshift, gpa);
+ return 0;
+
+failnoasid:
+ /* No asid (delayed unload). */
+ STAT(tlb_dropin_fail_no_asid);
+ gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+ if (!cb)
+ tfh_user_polling_mode(tfh);
+ else
+ gru_flush_cache(tfh);
+ return -EAGAIN;
+
+failupm:
+ /* Atomic failure switch CBR to UPM */
+ tfh_user_polling_mode(tfh);
+ STAT(tlb_dropin_fail_upm);
+ gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+ return 1;
+
+failfmm:
+ /* FMM state on UPM call */
+ STAT(tlb_dropin_fail_fmm);
+ gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
+ return 0;
+
+failidle:
+ /* TFH was idle - no miss pending */
+ gru_flush_cache(tfh);
+ if (cb)
+ gru_flush_cache(cb);
+ STAT(tlb_dropin_fail_idle);
+ gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state);
+ return 0;
+
+failinval:
+ /* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */
+ tfh_exception(tfh);
+ STAT(tlb_dropin_fail_invalid);
+ gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+ return -EFAULT;
+
+failactive:
+ /* Range invalidate active. Switch to UPM iff atomic */
+ if (!cb)
+ tfh_user_polling_mode(tfh);
+ else
+ gru_flush_cache(tfh);
+ STAT(tlb_dropin_fail_range_active);
+ gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n",
+ tfh, vaddr);
+ return 1;
+}
+
+/*
+ * Process an external interrupt from the GRU. This interrupt is
+ * caused by a TLB miss.
+ * Note that this is the interrupt handler that is registered with linux
+ * interrupt handlers.
+ */
+irqreturn_t gru_intr(int irq, void *dev_id)
+{
+ struct gru_state *gru;
+ struct gru_tlb_fault_map map;
+ struct gru_thread_state *gts;
+ struct gru_tlb_fault_handle *tfh = NULL;
+ int cbrnum, ctxnum;
+
+ STAT(intr);
+
+ gru = irq_to_gru(irq);
+ if (!gru) {
+ dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
+ raw_smp_processor_id(), irq);
+ return IRQ_NONE;
+ }
+ get_clear_fault_map(gru, &map);
+ gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
+ map.fault_bits[0]);
+
+ for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+ tfh = get_tfh_by_index(gru, cbrnum);
+ prefetchw(tfh); /* Helps on hdw, required for emulator */
+
+ /*
+ * When hardware sets a bit in the faultmap, it implicitly
+ * locks the GRU context so that it cannot be unloaded.
+ * The gts cannot change until a TFH start/writestart command
+ * is issued.
+ */
+ ctxnum = tfh->ctxnum;
+ gts = gru->gs_gts[ctxnum];
+
+ /*
+ * This is running in interrupt context. Trylock the mmap_sem.
+ * If it fails, retry the fault in user context.
+ */
+ if (down_read_trylock(>s->ts_mm->mmap_sem)) {
+ gru_try_dropin(gts, tfh, NULL);
+ up_read(>s->ts_mm->mmap_sem);
+ } else {
+ tfh_user_polling_mode(tfh);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+
+static int gru_user_dropin(struct gru_thread_state *gts,
+ struct gru_tlb_fault_handle *tfh,
+ unsigned long __user *cb)
+{
+ struct gru_mm_struct *gms = gts->ts_gms;
+ int ret;
+
+ while (1) {
+ wait_event(gms->ms_wait_queue,
+ atomic_read(&gms->ms_range_active) == 0);
+ prefetchw(tfh); /* Helps on hdw, required for emulator */
+ ret = gru_try_dropin(gts, tfh, cb);
+ if (ret <= 0)
+ return ret;
+ STAT(call_os_wait_queue);
+ }
+}
+
+/*
+ * This interface is called as a result of a user detecting a "call OS" bit
+ * in a user CB. Normally means that a TLB fault has occurred.
+ * cb - user virtual address of the CB
+ */
+int gru_handle_user_call_os(unsigned long cb)
+{
+ struct gru_tlb_fault_handle *tfh;
+ struct gru_thread_state *gts;
+ unsigned long __user *cbp;
+ int ucbnum, cbrnum, ret = -EINVAL;
+
+ STAT(call_os);
+ gru_dbg(grudev, "address 0x%lx\n", cb);
+
+ /* sanity check the cb pointer */
+ ucbnum = get_cb_number((void *)cb);
+ if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
+ return -EINVAL;
+ cbp = (unsigned long *)cb;
+
+ gts = gru_find_lock_gts(cb);
+ if (!gts)
+ return -EINVAL;
+
+ if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /*
+ * If force_unload is set, the UPM TLB fault is phony. The task
+ * has migrated to another node and the GSEG must be moved. Just
+ * unload the context. The task will page fault and assign a new
+ * context.
+ */
+ ret = -EAGAIN;
+ cbrnum = thread_cbr_number(gts, ucbnum);
+ if (gts->ts_force_unload) {
+ gru_unload_context(gts, 1);
+ } else if (gts->ts_gru) {
+ tfh = get_tfh_by_index(gts->ts_gru, cbrnum);
+ ret = gru_user_dropin(gts, tfh, cbp);
+ }
+exit:
+ gru_unlock_gts(gts);
+ return ret;
+}
+
+/*
+ * Fetch the exception detail information for a CB that terminated with
+ * an exception.
+ */
+int gru_get_exception_detail(unsigned long arg)
+{
+ struct control_block_extended_exc_detail excdet;
+ struct gru_control_block_extended *cbe;
+ struct gru_thread_state *gts;
+ int ucbnum, cbrnum, ret;
+
+ STAT(user_exception);
+ if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet)))
+ return -EFAULT;
+
+ gru_dbg(grudev, "address 0x%lx\n", excdet.cb);
+ gts = gru_find_lock_gts(excdet.cb);
+ if (!gts)
+ return -EINVAL;
+
+ if (gts->ts_gru) {
+ ucbnum = get_cb_number((void *)excdet.cb);
+ cbrnum = thread_cbr_number(gts, ucbnum);
+ cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
+ excdet.opc = cbe->opccpy;
+ excdet.exopc = cbe->exopccpy;
+ excdet.ecause = cbe->ecause;
+ excdet.exceptdet0 = cbe->idef1upd;
+ excdet.exceptdet1 = cbe->idef3upd;
+ ret = 0;
+ } else {
+ ret = -EAGAIN;
+ }
+ gru_unlock_gts(gts);
+
+ gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
+ excdet.ecause);
+ if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
+ ret = -EFAULT;
+ return ret;
+}
+
+/*
+ * User request to unload a context. Content is saved for possible reload.
+ */
+int gru_user_unload_context(unsigned long arg)
+{
+ struct gru_thread_state *gts;
+ struct gru_unload_context_req req;
+
+ STAT(user_unload_context);
+ if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+ return -EFAULT;
+
+ gru_dbg(grudev, "gseg 0x%lx\n", req.gseg);
+
+ gts = gru_find_lock_gts(req.gseg);
+ if (!gts)
+ return -EINVAL;
+
+ if (gts->ts_gru)
+ gru_unload_context(gts, 1);
+ gru_unlock_gts(gts);
+
+ return 0;
+}
+
+/*
+ * User request to flush a range of virtual addresses from the GRU TLB
+ * (Mainly for testing).
+ */
+int gru_user_flush_tlb(unsigned long arg)
+{
+ struct gru_thread_state *gts;
+ struct gru_flush_tlb_req req;
+
+ STAT(user_flush_tlb);
+ if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+ return -EFAULT;
+
+ gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg,
+ req.vaddr, req.len);
+
+ gts = gru_find_lock_gts(req.gseg);
+ if (!gts)
+ return -EINVAL;
+
+ gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len);
+ gru_unlock_gts(gts);
+
+ return 0;
+}
+
+/*
+ * Register the current task as the user of the GSEG slice.
+ * Needed for TLB fault interrupt targeting.
+ */
+int gru_set_task_slice(long address)
+{
+ struct gru_thread_state *gts;
+
+ STAT(set_task_slice);
+ gru_dbg(grudev, "address 0x%lx\n", address);
+ gts = gru_alloc_locked_gts(address);
+ if (!gts)
+ return -EINVAL;
+
+ gts->ts_tgid_owner = current->tgid;
+ gru_unlock_gts(gts);
+
+ return 0;
+}
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
new file mode 100644
index 0000000..23c91f5
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -0,0 +1,485 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * FILE OPERATIONS & DRIVER INITIALIZATION
+ *
+ * This file supports the user system call for file open, close, mmap, etc.
+ * This also incudes the driver initialization code.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#if defined CONFIG_X86_64
+#include <asm/genapic.h>
+#include <asm/irq.h>
+#define IS_UV() is_uv_system()
+#elif defined CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+/* temp support for running on hardware simulator */
+#define IS_UV() IS_MEDUSA() || ia64_platform_is("uv")
+#else
+#define IS_UV() 0
+#endif
+
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
+unsigned long gru_start_paddr, gru_end_paddr __read_mostly;
+struct gru_stats_s gru_stats;
+
+/* Guaranteed user available resources on each node */
+static int max_user_cbrs, max_user_dsr_bytes;
+
+static struct file_operations gru_fops;
+static struct miscdevice gru_miscdev;
+
+
+/*
+ * gru_vma_close
+ *
+ * Called when unmapping a device mapping. Frees all gru resources
+ * and tables belonging to the vma.
+ */
+static void gru_vma_close(struct vm_area_struct *vma)
+{
+ struct gru_vma_data *vdata;
+ struct gru_thread_state *gts;
+ struct list_head *entry, *next;
+
+ if (!vma->vm_private_data)
+ return;
+
+ vdata = vma->vm_private_data;
+ vma->vm_private_data = NULL;
+ gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file,
+ vdata);
+ list_for_each_safe(entry, next, &vdata->vd_head) {
+ gts =
+ list_entry(entry, struct gru_thread_state, ts_next);
+ list_del(>s->ts_next);
+ mutex_lock(>s->ts_ctxlock);
+ if (gts->ts_gru)
+ gru_unload_context(gts, 0);
+ mutex_unlock(>s->ts_ctxlock);
+ gts_drop(gts);
+ }
+ kfree(vdata);
+ STAT(vdata_free);
+}
+
+/*
+ * gru_file_mmap
+ *
+ * Called when mmaping the device. Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int gru_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE))
+ return -EPERM;
+
+ if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) ||
+ vma->vm_end & (GRU_GSEG_PAGESIZE - 1))
+ return -EINVAL;
+
+ vma->vm_flags |=
+ (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP |
+ VM_RESERVED);
+ vma->vm_page_prot = PAGE_SHARED;
+ vma->vm_ops = &gru_vm_ops;
+
+ vma->vm_private_data = gru_alloc_vma_data(vma, 0);
+ if (!vma->vm_private_data)
+ return -ENOMEM;
+
+ gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n",
+ file, vma->vm_start, vma, vma->vm_private_data);
+ return 0;
+}
+
+/*
+ * Create a new GRU context
+ */
+static int gru_create_new_context(unsigned long arg)
+{
+ struct gru_create_context_req req;
+ struct vm_area_struct *vma;
+ struct gru_vma_data *vdata;
+ int ret = -EINVAL;
+
+
+ if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+ return -EFAULT;
+
+ if (req.data_segment_bytes == 0 ||
+ req.data_segment_bytes > max_user_dsr_bytes)
+ return -EINVAL;
+ if (!req.control_blocks || !req.maximum_thread_count ||
+ req.control_blocks > max_user_cbrs)
+ return -EINVAL;
+
+ if (!(req.options & GRU_OPT_MISS_MASK))
+ req.options |= GRU_OPT_MISS_FMM_INTR;
+
+ down_write(¤t->mm->mmap_sem);
+ vma = gru_find_vma(req.gseg);
+ if (vma) {
+ vdata = vma->vm_private_data;
+ vdata->vd_user_options = req.options;
+ vdata->vd_dsr_au_count =
+ GRU_DS_BYTES_TO_AU(req.data_segment_bytes);
+ vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks);
+ ret = 0;
+ }
+ up_write(¤t->mm->mmap_sem);
+
+ return ret;
+}
+
+/*
+ * Get GRU configuration info (temp - for emulator testing)
+ */
+static long gru_get_config_info(unsigned long arg)
+{
+ struct gru_config_info info;
+ int nodesperblade;
+
+ if (num_online_nodes() > 1 &&
+ (uv_node_to_blade_id(1) == uv_node_to_blade_id(0)))
+ nodesperblade = 2;
+ else
+ nodesperblade = 1;
+ info.cpus = num_online_cpus();
+ info.nodes = num_online_nodes();
+ info.blades = info.nodes / nodesperblade;
+ info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades;
+
+ if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * Get GRU chiplet status
+ */
+static long gru_get_chiplet_status(unsigned long arg)
+{
+ struct gru_state *gru;
+ struct gru_chiplet_info info;
+
+ if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+ return -EFAULT;
+
+ if (info.node == -1)
+ info.node = numa_node_id();
+ if (info.node >= num_possible_nodes() ||
+ info.chiplet >= GRU_CHIPLETS_PER_HUB ||
+ info.node < 0 || info.chiplet < 0)
+ return -EINVAL;
+
+ info.blade = uv_node_to_blade_id(info.node);
+ gru = get_gru(info.blade, info.chiplet);
+
+ info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
+ info.total_cbr = GRU_NUM_CB;
+ info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
+ gru->gs_reserved_dsr_bytes;
+ info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
+ info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
+ GRU_DSR_AU_BYTES;
+ info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+
+ if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * gru_file_unlocked_ioctl
+ *
+ * Called to update file attributes via IOCTL calls.
+ */
+static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
+ unsigned long arg)
+{
+ int err = -EBADRQC;
+
+ gru_dbg(grudev, "file %p\n", file);
+
+ switch (req) {
+ case GRU_CREATE_CONTEXT:
+ err = gru_create_new_context(arg);
+ break;
+ case GRU_SET_TASK_SLICE:
+ err = gru_set_task_slice(arg);
+ break;
+ case GRU_USER_GET_EXCEPTION_DETAIL:
+ err = gru_get_exception_detail(arg);
+ break;
+ case GRU_USER_UNLOAD_CONTEXT:
+ err = gru_user_unload_context(arg);
+ break;
+ case GRU_GET_CHIPLET_STATUS:
+ err = gru_get_chiplet_status(arg);
+ break;
+ case GRU_USER_FLUSH_TLB:
+ err = gru_user_flush_tlb(arg);
+ break;
+ case GRU_USER_CALL_OS:
+ err = gru_handle_user_call_os(arg);
+ break;
+ case GRU_GET_CONFIG_INFO:
+ err = gru_get_config_info(arg);
+ break;
+ }
+ return err;
+}
+
+/*
+ * Called at init time to build tables for all GRUs that are present in the
+ * system.
+ */
+static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
+ void *vaddr, int nid, int bid, int grunum)
+{
+ spin_lock_init(&gru->gs_lock);
+ spin_lock_init(&gru->gs_asid_lock);
+ gru->gs_gru_base_paddr = paddr;
+ gru->gs_gru_base_vaddr = vaddr;
+ gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum;
+ gru->gs_blade = gru_base[bid];
+ gru->gs_blade_id = bid;
+ gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1;
+ gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1;
+ gru_tgh_flush_init(gru);
+ gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n",
+ bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
+ gru->gs_gru_base_paddr);
+ gru_kservices_init(gru);
+}
+
+static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
+{
+ int pnode, nid, bid, chip;
+ int cbrs, dsrbytes, n;
+ int order = get_order(sizeof(struct gru_blade_state));
+ struct page *page;
+ struct gru_state *gru;
+ unsigned long paddr;
+ void *vaddr;
+
+ max_user_cbrs = GRU_NUM_CB;
+ max_user_dsr_bytes = GRU_NUM_DSR_BYTES;
+ for_each_online_node(nid) {
+ bid = uv_node_to_blade_id(nid);
+ pnode = uv_node_to_pnode(nid);
+ if (gru_base[bid])
+ continue;
+ page = alloc_pages_node(nid, GFP_KERNEL, order);
+ if (!page)
+ goto fail;
+ gru_base[bid] = page_address(page);
+ memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
+ gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
+ spin_lock_init(&gru_base[bid]->bs_lock);
+
+ dsrbytes = 0;
+ cbrs = 0;
+ for (gru = gru_base[bid]->bs_grus, chip = 0;
+ chip < GRU_CHIPLETS_PER_BLADE;
+ chip++, gru++) {
+ paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip);
+ vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip);
+ gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip);
+ n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+ cbrs = max(cbrs, n);
+ n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+ dsrbytes = max(dsrbytes, n);
+ }
+ max_user_cbrs = min(max_user_cbrs, cbrs);
+ max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes);
+ }
+
+ return 0;
+
+fail:
+ for (nid--; nid >= 0; nid--)
+ free_pages((unsigned long)gru_base[nid], order);
+ return -ENOMEM;
+}
+
+#ifdef CONFIG_IA64
+
+static int get_base_irq(void)
+{
+ return IRQ_GRU;
+}
+
+#elif defined CONFIG_X86_64
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip gru_chip = {
+ .name = "gru",
+ .mask = noop,
+ .unmask = noop,
+ .ack = noop,
+};
+
+static int get_base_irq(void)
+{
+ set_irq_chip(IRQ_GRU, &gru_chip);
+ set_irq_chip(IRQ_GRU + 1, &gru_chip);
+ return IRQ_GRU;
+}
+#endif
+
+/*
+ * gru_init
+ *
+ * Called at boot or module load time to initialize the GRUs.
+ */
+static int __init gru_init(void)
+{
+ int ret, irq, chip;
+ char id[10];
+ void *gru_start_vaddr;
+
+ if (!IS_UV())
+ return 0;
+
+#if defined CONFIG_IA64
+ gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
+#else
+ gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) &
+ 0x7fffffffffffUL;
+
+#endif
+ gru_start_vaddr = __va(gru_start_paddr);
+ gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE;
+ printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
+ gru_start_paddr, gru_end_paddr);
+ irq = get_base_irq();
+ for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
+ ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
+ if (ret) {
+ printk(KERN_ERR "%s: request_irq failed\n",
+ GRU_DRIVER_ID_STR);
+ goto exit1;
+ }
+ }
+
+ ret = misc_register(&gru_miscdev);
+ if (ret) {
+ printk(KERN_ERR "%s: misc_register failed\n",
+ GRU_DRIVER_ID_STR);
+ goto exit1;
+ }
+
+ ret = gru_proc_init();
+ if (ret) {
+ printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
+ goto exit2;
+ }
+
+ ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
+ if (ret) {
+ printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
+ goto exit3;
+ }
+
+ printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
+ GRU_DRIVER_VERSION_STR);
+ return 0;
+
+exit3:
+ gru_proc_exit();
+exit2:
+ misc_deregister(&gru_miscdev);
+exit1:
+ for (--chip; chip >= 0; chip--)
+ free_irq(irq + chip, NULL);
+ return ret;
+
+}
+
+static void __exit gru_exit(void)
+{
+ int i, bid;
+ int order = get_order(sizeof(struct gru_state) *
+ GRU_CHIPLETS_PER_BLADE);
+
+ for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
+ free_irq(IRQ_GRU + i, NULL);
+
+ for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+ free_pages((unsigned long)gru_base[bid], order);
+
+ misc_deregister(&gru_miscdev);
+ gru_proc_exit();
+}
+
+static struct file_operations gru_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = gru_file_unlocked_ioctl,
+ .mmap = gru_file_mmap,
+};
+
+static struct miscdevice gru_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "gru",
+ .fops = &gru_fops,
+};
+
+struct vm_operations_struct gru_vm_ops = {
+ .close = gru_vma_close,
+ .fault = gru_fault,
+};
+
+module_init(gru_init);
+module_exit(gru_exit);
+
+module_param(gru_options, ulong, 0644);
+MODULE_PARM_DESC(gru_options, "Various debug options");
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR);
+MODULE_VERSION(GRU_DRIVER_VERSION_STR);
+
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
new file mode 100644
index 0000000..d16031d
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -0,0 +1,663 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * GRU HANDLE DEFINITION
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __GRUHANDLES_H__
+#define __GRUHANDLES_H__
+#include "gru_instructions.h"
+
+/*
+ * Manifest constants for GRU Memory Map
+ */
+#define GRU_GSEG0_BASE 0
+#define GRU_MCS_BASE (64 * 1024 * 1024)
+#define GRU_SIZE (128UL * 1024 * 1024)
+
+/* Handle & resource counts */
+#define GRU_NUM_CB 128
+#define GRU_NUM_DSR_BYTES (32 * 1024)
+#define GRU_NUM_TFM 16
+#define GRU_NUM_TGH 24
+#define GRU_NUM_CBE 128
+#define GRU_NUM_TFH 128
+#define GRU_NUM_CCH 16
+#define GRU_NUM_GSH 1
+
+/* Maximum resource counts that can be reserved by user programs */
+#define GRU_NUM_USER_CBR GRU_NUM_CBE
+#define GRU_NUM_USER_DSR_BYTES GRU_NUM_DSR_BYTES
+
+/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles
+ * are the same */
+#define GRU_HANDLE_BYTES 64
+#define GRU_HANDLE_STRIDE 256
+
+/* Base addresses of handles */
+#define GRU_TFM_BASE (GRU_MCS_BASE + 0x00000)
+#define GRU_TGH_BASE (GRU_MCS_BASE + 0x08000)
+#define GRU_CBE_BASE (GRU_MCS_BASE + 0x10000)
+#define GRU_TFH_BASE (GRU_MCS_BASE + 0x18000)
+#define GRU_CCH_BASE (GRU_MCS_BASE + 0x20000)
+#define GRU_GSH_BASE (GRU_MCS_BASE + 0x30000)
+
+/* User gseg constants */
+#define GRU_GSEG_STRIDE (4 * 1024 * 1024)
+#define GSEG_BASE(a) ((a) & ~(GRU_GSEG_PAGESIZE - 1))
+
+/* Data segment constants */
+#define GRU_DSR_AU_BYTES 1024
+#define GRU_DSR_CL (GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU_CL (GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU (GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES)
+
+/* Control block constants */
+#define GRU_CBR_AU_SIZE 2
+#define GRU_CBR_AU (GRU_NUM_CBE / GRU_CBR_AU_SIZE)
+
+/* Convert resource counts to the number of AU */
+#define GRU_DS_BYTES_TO_AU(n) DIV_ROUND_UP(n, GRU_DSR_AU_BYTES)
+#define GRU_CB_COUNT_TO_AU(n) DIV_ROUND_UP(n, GRU_CBR_AU_SIZE)
+
+/* UV limits */
+#define GRU_CHIPLETS_PER_HUB 2
+#define GRU_HUBS_PER_BLADE 1
+#define GRU_CHIPLETS_PER_BLADE (GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB)
+
+/* User GRU Gseg offsets */
+#define GRU_CB_BASE 0
+#define GRU_CB_LIMIT (GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE)
+#define GRU_DS_BASE 0x20000
+#define GRU_DS_LIMIT (GRU_DS_BASE + GRU_NUM_DSR_BYTES)
+
+/* Convert a GRU physical address to the chiplet offset */
+#define GSEGPOFF(h) ((h) & (GRU_SIZE - 1))
+
+/* Convert an arbitrary handle address to the beginning of the GRU segment */
+#ifndef __PLUGIN__
+#define GRUBASE(h) ((void *)((unsigned long)(h) & ~(GRU_SIZE - 1)))
+#else
+extern void *gmu_grubase(void *h);
+#define GRUBASE(h) gmu_grubase(h)
+#endif
+
+/* General addressing macros. */
+static inline void *get_gseg_base_address(void *base, int ctxnum)
+{
+ return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum);
+}
+
+static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line)
+{
+ return (void *)(get_gseg_base_address(base, ctxnum) +
+ GRU_CB_BASE + GRU_HANDLE_STRIDE * line);
+}
+
+static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line)
+{
+ return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE +
+ GRU_CACHE_LINE_BYTES * line);
+}
+
+static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum)
+{
+ return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE +
+ ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum)
+{
+ return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE +
+ ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum)
+{
+ return (struct gru_control_block_extended *)(base + GRU_CBE_BASE +
+ ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum)
+{
+ return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE +
+ ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_context_configuration_handle *get_cch(void *base,
+ int ctxnum)
+{
+ return (struct gru_context_configuration_handle *)(base +
+ GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline unsigned long get_cb_number(void *cb)
+{
+ return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) /
+ GRU_HANDLE_STRIDE;
+}
+
+/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/
+static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode,
+ int chiplet)
+{
+ return paddr + GRU_SIZE * (2 * pnode + chiplet);
+}
+
+static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet)
+{
+ return vaddr + GRU_SIZE * (2 * pnode + chiplet);
+}
+
+
+
+/*
+ * Global TLB Fault Map
+ * Bitmap of outstanding TLB misses needing interrupt/polling service.
+ *
+ */
+struct gru_tlb_fault_map {
+ unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+ unsigned long fill0[2];
+ unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+ unsigned long fill1[2];
+};
+
+/*
+ * TGH - TLB Global Handle
+ * Used for TLB flushing.
+ *
+ */
+struct gru_tlb_global_handle {
+ unsigned int cmd:1; /* DW 0 */
+ unsigned int delresp:1;
+ unsigned int opc:1;
+ unsigned int fill1:5;
+
+ unsigned int fill2:8;
+
+ unsigned int status:2;
+ unsigned long fill3:2;
+ unsigned int state:3;
+ unsigned long fill4:1;
+
+ unsigned int cause:3;
+ unsigned long fill5:37;
+
+ unsigned long vaddr:64; /* DW 1 */
+
+ unsigned int asid:24; /* DW 2 */
+ unsigned int fill6:8;
+
+ unsigned int pagesize:5;
+ unsigned int fill7:11;
+
+ unsigned int global:1;
+ unsigned int fill8:15;
+
+ unsigned long vaddrmask:39; /* DW 3 */
+ unsigned int fill9:9;
+ unsigned int n:10;
+ unsigned int fill10:6;
+
+ unsigned int ctxbitmap:16; /* DW4 */
+ unsigned long fill11[3];
+};
+
+enum gru_tgh_cmd {
+ TGHCMD_START
+};
+
+enum gru_tgh_opc {
+ TGHOP_TLBNOP,
+ TGHOP_TLBINV
+};
+
+enum gru_tgh_status {
+ TGHSTATUS_IDLE,
+ TGHSTATUS_EXCEPTION,
+ TGHSTATUS_ACTIVE
+};
+
+enum gru_tgh_state {
+ TGHSTATE_IDLE,
+ TGHSTATE_PE_INVAL,
+ TGHSTATE_INTERRUPT_INVAL,
+ TGHSTATE_WAITDONE,
+ TGHSTATE_RESTART_CTX,
+};
+
+/*
+ * TFH - TLB Global Handle
+ * Used for TLB dropins into the GRU TLB.
+ *
+ */
+struct gru_tlb_fault_handle {
+ unsigned int cmd:1; /* DW 0 - low 32*/
+ unsigned int delresp:1;
+ unsigned int fill0:2;
+ unsigned int opc:3;
+ unsigned int fill1:9;
+
+ unsigned int status:2;
+ unsigned int fill2:1;
+ unsigned int color:1;
+ unsigned int state:3;
+ unsigned int fill3:1;
+
+ unsigned int cause:7; /* DW 0 - high 32 */
+ unsigned int fill4:1;
+
+ unsigned int indexway:12;
+ unsigned int fill5:4;
+
+ unsigned int ctxnum:4;
+ unsigned int fill6:12;
+
+ unsigned long missvaddr:64; /* DW 1 */
+
+ unsigned int missasid:24; /* DW 2 */
+ unsigned int fill7:8;
+ unsigned int fillasid:24;
+ unsigned int dirty:1;
+ unsigned int gaa:2;
+ unsigned long fill8:5;
+
+ unsigned long pfn:41; /* DW 3 */
+ unsigned int fill9:7;
+ unsigned int pagesize:5;
+ unsigned int fill10:11;
+
+ unsigned long fillvaddr:64; /* DW 4 */
+
+ unsigned long fill11[3];
+};
+
+enum gru_tfh_opc {
+ TFHOP_NOOP,
+ TFHOP_RESTART,
+ TFHOP_WRITE_ONLY,
+ TFHOP_WRITE_RESTART,
+ TFHOP_EXCEPTION,
+ TFHOP_USER_POLLING_MODE = 7,
+};
+
+enum tfh_status {
+ TFHSTATUS_IDLE,
+ TFHSTATUS_EXCEPTION,
+ TFHSTATUS_ACTIVE,
+};
+
+enum tfh_state {
+ TFHSTATE_INACTIVE,
+ TFHSTATE_IDLE,
+ TFHSTATE_MISS_UPM,
+ TFHSTATE_MISS_FMM,
+ TFHSTATE_HW_ERR,
+ TFHSTATE_WRITE_TLB,
+ TFHSTATE_RESTART_CBR,
+};
+
+/* TFH cause bits */
+enum tfh_cause {
+ TFHCAUSE_NONE,
+ TFHCAUSE_TLB_MISS,
+ TFHCAUSE_TLB_MOD,
+ TFHCAUSE_HW_ERROR_RR,
+ TFHCAUSE_HW_ERROR_MAIN_ARRAY,
+ TFHCAUSE_HW_ERROR_VALID,
+ TFHCAUSE_HW_ERROR_PAGESIZE,
+ TFHCAUSE_INSTRUCTION_EXCEPTION,
+ TFHCAUSE_UNCORRECTIBLE_ERROR,
+};
+
+/* GAA values */
+#define GAA_RAM 0x0
+#define GAA_NCRAM 0x2
+#define GAA_MMIO 0x1
+#define GAA_REGISTER 0x3
+
+/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */
+#define GRU_PADDR_SHIFT 12
+
+/*
+ * Context Configuration handle
+ * Used to allocate resources to a GSEG context.
+ *
+ */
+struct gru_context_configuration_handle {
+ unsigned int cmd:1; /* DW0 */
+ unsigned int delresp:1;
+ unsigned int opc:3;
+ unsigned int unmap_enable:1;
+ unsigned int req_slice_set_enable:1;
+ unsigned int req_slice:2;
+ unsigned int cb_int_enable:1;
+ unsigned int tlb_int_enable:1;
+ unsigned int tfm_fault_bit_enable:1;
+ unsigned int tlb_int_select:4;
+
+ unsigned int status:2;
+ unsigned int state:2;
+ unsigned int reserved2:4;
+
+ unsigned int cause:4;
+ unsigned int tfm_done_bit_enable:1;
+ unsigned int unused:3;
+
+ unsigned int dsr_allocation_map;
+
+ unsigned long cbr_allocation_map; /* DW1 */
+
+ unsigned int asid[8]; /* DW 2 - 5 */
+ unsigned short sizeavail[8]; /* DW 6 - 7 */
+} __attribute__ ((packed));
+
+enum gru_cch_opc {
+ CCHOP_START = 1,
+ CCHOP_ALLOCATE,
+ CCHOP_INTERRUPT,
+ CCHOP_DEALLOCATE,
+ CCHOP_INTERRUPT_SYNC,
+};
+
+enum gru_cch_status {
+ CCHSTATUS_IDLE,
+ CCHSTATUS_EXCEPTION,
+ CCHSTATUS_ACTIVE,
+};
+
+enum gru_cch_state {
+ CCHSTATE_INACTIVE,
+ CCHSTATE_MAPPED,
+ CCHSTATE_ACTIVE,
+ CCHSTATE_INTERRUPTED,
+};
+
+/* CCH Exception cause */
+enum gru_cch_cause {
+ CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1,
+ CCHCAUSE_ILLEGAL_OPCODE = 2,
+ CCHCAUSE_INVALID_START_REQUEST = 3,
+ CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4,
+ CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5,
+ CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6,
+ CCHCAUSE_CCH_BUSY = 7,
+ CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8,
+ CCHCAUSE_BAD_TFM_CONFIG = 9,
+ CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10,
+ CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11,
+ CCHCAUSE_CBR_DEALLOCATION_ERROR = 12,
+};
+/*
+ * CBE - Control Block Extended
+ * Maintains internal GRU state for active CBs.
+ *
+ */
+struct gru_control_block_extended {
+ unsigned int reserved0:1; /* DW 0 - low */
+ unsigned int imacpy:3;
+ unsigned int reserved1:4;
+ unsigned int xtypecpy:3;
+ unsigned int iaa0cpy:2;
+ unsigned int iaa1cpy:2;
+ unsigned int reserved2:1;
+ unsigned int opccpy:8;
+ unsigned int exopccpy:8;
+
+ unsigned int idef2cpy:22; /* DW 0 - high */
+ unsigned int reserved3:10;
+
+ unsigned int idef4cpy:22; /* DW 1 */
+ unsigned int reserved4:10;
+ unsigned int idef4upd:22;
+ unsigned int reserved5:10;
+
+ unsigned long idef1upd:64; /* DW 2 */
+
+ unsigned long idef5cpy:64; /* DW 3 */
+
+ unsigned long idef6cpy:64; /* DW 4 */
+
+ unsigned long idef3upd:64; /* DW 5 */
+
+ unsigned long idef5upd:64; /* DW 6 */
+
+ unsigned int idef2upd:22; /* DW 7 */
+ unsigned int reserved6:10;
+
+ unsigned int ecause:20;
+ unsigned int cbrstate:4;
+ unsigned int cbrexecstatus:8;
+};
+
+enum gru_cbr_state {
+ CBRSTATE_INACTIVE,
+ CBRSTATE_IDLE,
+ CBRSTATE_PE_CHECK,
+ CBRSTATE_QUEUED,
+ CBRSTATE_WAIT_RESPONSE,
+ CBRSTATE_INTERRUPTED,
+ CBRSTATE_INTERRUPTED_MISS_FMM,
+ CBRSTATE_BUSY_INTERRUPT_MISS_FMM,
+ CBRSTATE_INTERRUPTED_MISS_UPM,
+ CBRSTATE_BUSY_INTERRUPTED_MISS_UPM,
+ CBRSTATE_REQUEST_ISSUE,
+ CBRSTATE_BUSY_INTERRUPT,
+};
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT 0
+#define CBR_EXS_INT_OCC_BIT 1
+#define CBR_EXS_PENDING_BIT 2
+#define CBR_EXS_QUEUED_BIT 3
+#define CBR_EXS_TLBHW_BIT 4
+#define CBR_EXS_EXCEPTION_BIT 5
+
+#define CBR_EXS_ABORT_OCC (1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC (1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING (1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED (1 << CBR_EXS_QUEUED_BIT)
+#define CBR_EXS_TLBHW (1 << CBR_EXS_TLBHW_BIT)
+#define CBR_EXS_EXCEPTION (1 << CBR_EXS_EXCEPTION_BIT)
+
+/* CBE ecause bits - defined in gru_instructions.h */
+
+/*
+ * Convert a processor pagesize into the strange encoded pagesize used by the
+ * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT)
+ * pagesize log pagesize grupagesize
+ * 4k 12 0
+ * 16k 14 1
+ * 64k 16 2
+ * 256k 18 3
+ * 1m 20 4
+ * 2m 21 5
+ * 4m 22 6
+ * 16m 24 7
+ * 64m 26 8
+ * ...
+ */
+#define GRU_PAGESIZE(sh) ((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6)
+#define GRU_SIZEAVAIL(sh) (1UL << GRU_PAGESIZE(sh))
+
+/* minimum TLB purge count to ensure a full purge */
+#define GRUMAXINVAL 1024UL
+
+
+/* Extract the status field from a kernel handle */
+#define GET_MSEG_HANDLE_STATUS(h) (((*(unsigned long *)(h)) >> 16) & 3)
+
+static inline void start_instruction(void *h)
+{
+ unsigned long *w0 = h;
+
+ wmb(); /* setting CMD bit must be last */
+ *w0 = *w0 | 1;
+ gru_flush_cache(h);
+}
+
+static inline int wait_instruction_complete(void *h)
+{
+ int status;
+
+ do {
+ cpu_relax();
+ barrier();
+ status = GET_MSEG_HANDLE_STATUS(h);
+ } while (status == CCHSTATUS_ACTIVE);
+ return status;
+}
+
+#if defined CONFIG_IA64
+static inline void cch_allocate_set_asids(
+ struct gru_context_configuration_handle *cch, int asidval)
+{
+ int i;
+
+ for (i = 0; i <= RGN_HPAGE; i++) { /* assume HPAGE is last region */
+ cch->asid[i] = (asidval++);
+#if 0
+ /* ZZZ hugepages not supported yet */
+ if (i == RGN_HPAGE)
+ cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift);
+ else
+#endif
+ cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT);
+ }
+}
+#elif defined CONFIG_X86_64
+static inline void cch_allocate_set_asids(
+ struct gru_context_configuration_handle *cch, int asidval)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ cch->asid[i] = asidval++;
+ cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) |
+ GRU_SIZEAVAIL(21);
+ }
+}
+#endif
+
+static inline int cch_allocate(struct gru_context_configuration_handle *cch,
+ int asidval, unsigned long cbrmap,
+ unsigned long dsrmap)
+{
+ cch_allocate_set_asids(cch, asidval);
+ cch->dsr_allocation_map = dsrmap;
+ cch->cbr_allocation_map = cbrmap;
+ cch->opc = CCHOP_ALLOCATE;
+ start_instruction(cch);
+ return wait_instruction_complete(cch);
+}
+
+static inline int cch_start(struct gru_context_configuration_handle *cch)
+{
+ cch->opc = CCHOP_START;
+ start_instruction(cch);
+ return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt(struct gru_context_configuration_handle *cch)
+{
+ cch->opc = CCHOP_INTERRUPT;
+ start_instruction(cch);
+ return wait_instruction_complete(cch);
+}
+
+static inline int cch_deallocate(struct gru_context_configuration_handle *cch)
+{
+ cch->opc = CCHOP_DEALLOCATE;
+ start_instruction(cch);
+ return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt_sync(struct gru_context_configuration_handle
+ *cch)
+{
+ cch->opc = CCHOP_INTERRUPT_SYNC;
+ start_instruction(cch);
+ return wait_instruction_complete(cch);
+}
+
+static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh,
+ unsigned long vaddr, unsigned long vaddrmask,
+ int asid, int pagesize, int global, int n,
+ unsigned short ctxbitmap)
+{
+ tgh->vaddr = vaddr;
+ tgh->asid = asid;
+ tgh->pagesize = pagesize;
+ tgh->n = n;
+ tgh->global = global;
+ tgh->vaddrmask = vaddrmask;
+ tgh->ctxbitmap = ctxbitmap;
+ tgh->opc = TGHOP_TLBINV;
+ start_instruction(tgh);
+ return wait_instruction_complete(tgh);
+}
+
+static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh,
+ unsigned long pfn, unsigned long vaddr,
+ int asid, int dirty, int pagesize)
+{
+ tfh->fillasid = asid;
+ tfh->fillvaddr = vaddr;
+ tfh->pfn = pfn;
+ tfh->dirty = dirty;
+ tfh->pagesize = pagesize;
+ tfh->opc = TFHOP_WRITE_ONLY;
+ start_instruction(tfh);
+}
+
+static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh,
+ unsigned long paddr, int gaa,
+ unsigned long vaddr, int asid, int dirty,
+ int pagesize)
+{
+ tfh->fillasid = asid;
+ tfh->fillvaddr = vaddr;
+ tfh->pfn = paddr >> GRU_PADDR_SHIFT;
+ tfh->gaa = gaa;
+ tfh->dirty = dirty;
+ tfh->pagesize = pagesize;
+ tfh->opc = TFHOP_WRITE_RESTART;
+ start_instruction(tfh);
+}
+
+static inline void tfh_restart(struct gru_tlb_fault_handle *tfh)
+{
+ tfh->opc = TFHOP_RESTART;
+ start_instruction(tfh);
+}
+
+static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh)
+{
+ tfh->opc = TFHOP_USER_POLLING_MODE;
+ start_instruction(tfh);
+}
+
+static inline void tfh_exception(struct gru_tlb_fault_handle *tfh)
+{
+ tfh->opc = TFHOP_EXCEPTION;
+ start_instruction(tfh);
+}
+
+#endif /* __GRUHANDLES_H__ */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
new file mode 100644
index 0000000..dfd49af
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -0,0 +1,679 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * KERNEL SERVICES THAT USE THE GRU
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+#include "grukservices.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Kernel GRU Usage
+ *
+ * The following is an interim algorithm for management of kernel GRU
+ * resources. This will likely be replaced when we better understand the
+ * kernel/user requirements.
+ *
+ * At boot time, the kernel permanently reserves a fixed number of
+ * CBRs/DSRs for each cpu to use. The resources are all taken from
+ * the GRU chiplet 1 on the blade. This leaves the full set of resources
+ * of chiplet 0 available to be allocated to a single user.
+ */
+
+/* Blade percpu resources PERMANENTLY reserved for kernel use */
+#define GRU_NUM_KERNEL_CBR 1
+#define GRU_NUM_KERNEL_DSR_BYTES 256
+#define KERNEL_CTXNUM 15
+
+/* GRU instruction attributes for all instructions */
+#define IMA IMA_CB_DELAY
+
+/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */
+#define __gru_cacheline_aligned__ \
+ __attribute__((__aligned__(GRU_CACHE_LINE_BYTES)))
+
+#define MAGIC 0x1234567887654321UL
+
+/* Default retry count for GRU errors on kernel instructions */
+#define EXCEPTION_RETRY_LIMIT 3
+
+/* Status of message queue sections */
+#define MQS_EMPTY 0
+#define MQS_FULL 1
+#define MQS_NOOP 2
+
+/*----------------- RESOURCE MANAGEMENT -------------------------------------*/
+/* optimized for x86_64 */
+struct message_queue {
+ union gru_mesqhead head __gru_cacheline_aligned__; /* CL 0 */
+ int qlines; /* DW 1 */
+ long hstatus[2];
+ void *next __gru_cacheline_aligned__;/* CL 1 */
+ void *limit;
+ void *start;
+ void *start2;
+ char data ____cacheline_aligned; /* CL 2 */
+};
+
+/* First word in every message - used by mesq interface */
+struct message_header {
+ char present;
+ char present2;
+ char lines;
+ char fill;
+};
+
+#define QLINES(mq) ((mq) + offsetof(struct message_queue, qlines))
+#define HSTATUS(mq, h) ((mq) + offsetof(struct message_queue, hstatus[h]))
+
+static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
+{
+ struct gru_blade_state *bs;
+ int lcpu;
+
+ BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
+ preempt_disable();
+ bs = gru_base[uv_numa_blade_id()];
+ lcpu = uv_blade_processor_id();
+ *cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
+ *dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
+ return 0;
+}
+
+static void gru_free_cpu_resources(void *cb, void *dsr)
+{
+ preempt_enable();
+}
+
+int gru_get_cb_exception_detail(void *cb,
+ struct control_block_extended_exc_detail *excdet)
+{
+ struct gru_control_block_extended *cbe;
+
+ cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
+ excdet->opc = cbe->opccpy;
+ excdet->exopc = cbe->exopccpy;
+ excdet->ecause = cbe->ecause;
+ excdet->exceptdet0 = cbe->idef1upd;
+ excdet->exceptdet1 = cbe->idef3upd;
+ return 0;
+}
+
+char *gru_get_cb_exception_detail_str(int ret, void *cb,
+ char *buf, int size)
+{
+ struct gru_control_block_status *gen = (void *)cb;
+ struct control_block_extended_exc_detail excdet;
+
+ if (ret > 0 && gen->istatus == CBS_EXCEPTION) {
+ gru_get_cb_exception_detail(cb, &excdet);
+ snprintf(buf, size,
+ "GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x,"
+ "excdet0 0x%lx, excdet1 0x%x",
+ gen, excdet.opc, excdet.exopc, excdet.ecause,
+ excdet.exceptdet0, excdet.exceptdet1);
+ } else {
+ snprintf(buf, size, "No exception");
+ }
+ return buf;
+}
+
+static int gru_wait_idle_or_exception(struct gru_control_block_status *gen)
+{
+ while (gen->istatus >= CBS_ACTIVE) {
+ cpu_relax();
+ barrier();
+ }
+ return gen->istatus;
+}
+
+static int gru_retry_exception(void *cb)
+{
+ struct gru_control_block_status *gen = (void *)cb;
+ struct control_block_extended_exc_detail excdet;
+ int retry = EXCEPTION_RETRY_LIMIT;
+
+ while (1) {
+ if (gru_get_cb_message_queue_substatus(cb))
+ break;
+ if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
+ return CBS_IDLE;
+
+ gru_get_cb_exception_detail(cb, &excdet);
+ if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+ break;
+ if (retry-- == 0)
+ break;
+ gen->icmd = 1;
+ gru_flush_cache(gen);
+ }
+ return CBS_EXCEPTION;
+}
+
+int gru_check_status_proc(void *cb)
+{
+ struct gru_control_block_status *gen = (void *)cb;
+ int ret;
+
+ ret = gen->istatus;
+ if (ret != CBS_EXCEPTION)
+ return ret;
+ return gru_retry_exception(cb);
+
+}
+
+int gru_wait_proc(void *cb)
+{
+ struct gru_control_block_status *gen = (void *)cb;
+ int ret;
+
+ ret = gru_wait_idle_or_exception(gen);
+ if (ret == CBS_EXCEPTION)
+ ret = gru_retry_exception(cb);
+
+ return ret;
+}
+
+void gru_abort(int ret, void *cb, char *str)
+{
+ char buf[GRU_EXC_STR_SIZE];
+
+ panic("GRU FATAL ERROR: %s - %s\n", str,
+ gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf)));
+}
+
+void gru_wait_abort_proc(void *cb)
+{
+ int ret;
+
+ ret = gru_wait_proc(cb);
+ if (ret)
+ gru_abort(ret, cb, "gru_wait_abort");
+}
+
+
+/*------------------------------ MESSAGE QUEUES -----------------------------*/
+
+/* Internal status . These are NOT returned to the user. */
+#define MQIE_AGAIN -1 /* try again */
+
+
+/*
+ * Save/restore the "present" flag that is in the second line of 2-line
+ * messages
+ */
+static inline int get_present2(void *p)
+{
+ struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+ return mhdr->present;
+}
+
+static inline void restore_present2(void *p, int val)
+{
+ struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+ mhdr->present = val;
+}
+
+/*
+ * Create a message queue.
+ * qlines - message queue size in cache lines. Includes 2-line header.
+ */
+int gru_create_message_queue(void *p, unsigned int bytes)
+{
+ struct message_queue *mq = p;
+ unsigned int qlines;
+
+ qlines = bytes / GRU_CACHE_LINE_BYTES - 2;
+ memset(mq, 0, bytes);
+ mq->start = &mq->data;
+ mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES;
+ mq->next = &mq->data;
+ mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES;
+ mq->qlines = qlines;
+ mq->hstatus[0] = 0;
+ mq->hstatus[1] = 1;
+ mq->head = gru_mesq_head(2, qlines / 2 + 1);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gru_create_message_queue);
+
+/*
+ * Send a NOOP message to a message queue
+ * Returns:
+ * 0 - if queue is full after the send. This is the normal case
+ * but various races can change this.
+ * -1 - if mesq sent successfully but queue not full
+ * >0 - unexpected error. MQE_xxx returned
+ */
+static int send_noop_message(void *cb,
+ unsigned long mq, void *mesg)
+{
+ const struct message_header noop_header = {
+ .present = MQS_NOOP, .lines = 1};
+ unsigned long m;
+ int substatus, ret;
+ struct message_header save_mhdr, *mhdr = mesg;
+
+ STAT(mesq_noop);
+ save_mhdr = *mhdr;
+ *mhdr = noop_header;
+ gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA);
+ ret = gru_wait(cb);
+
+ if (ret) {
+ substatus = gru_get_cb_message_queue_substatus(cb);
+ switch (substatus) {
+ case CBSS_NO_ERROR:
+ STAT(mesq_noop_unexpected_error);
+ ret = MQE_UNEXPECTED_CB_ERR;
+ break;
+ case CBSS_LB_OVERFLOWED:
+ STAT(mesq_noop_lb_overflow);
+ ret = MQE_CONGESTION;
+ break;
+ case CBSS_QLIMIT_REACHED:
+ STAT(mesq_noop_qlimit_reached);
+ ret = 0;
+ break;
+ case CBSS_AMO_NACKED:
+ STAT(mesq_noop_amo_nacked);
+ ret = MQE_CONGESTION;
+ break;
+ case CBSS_PUT_NACKED:
+ STAT(mesq_noop_put_nacked);
+ m = mq + (gru_get_amo_value_head(cb) << 6);
+ gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1,
+ IMA);
+ if (gru_wait(cb) == CBS_IDLE)
+ ret = MQIE_AGAIN;
+ else
+ ret = MQE_UNEXPECTED_CB_ERR;
+ break;
+ case CBSS_PAGE_OVERFLOW:
+ default:
+ BUG();
+ }
+ }
+ *mhdr = save_mhdr;
+ return ret;
+}
+
+/*
+ * Handle a gru_mesq full.
+ */
+static int send_message_queue_full(void *cb,
+ unsigned long mq, void *mesg, int lines)
+{
+ union gru_mesqhead mqh;
+ unsigned int limit, head;
+ unsigned long avalue;
+ int half, qlines, save;
+
+ /* Determine if switching to first/second half of q */
+ avalue = gru_get_amo_value(cb);
+ head = gru_get_amo_value_head(cb);
+ limit = gru_get_amo_value_limit(cb);
+
+ /*
+ * Fetch "qlines" from the queue header. Since the queue may be
+ * in memory that can't be accessed using socket addresses, use
+ * the GRU to access the data. Use DSR space from the message.
+ */
+ save = *(int *)mesg;
+ gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ goto cberr;
+ qlines = *(int *)mesg;
+ *(int *)mesg = save;
+ half = (limit != qlines);
+
+ if (half)
+ mqh = gru_mesq_head(qlines / 2 + 1, qlines);
+ else
+ mqh = gru_mesq_head(2, qlines / 2 + 1);
+
+ /* Try to get lock for switching head pointer */
+ gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ goto cberr;
+ if (!gru_get_amo_value(cb)) {
+ STAT(mesq_qf_locked);
+ return MQE_QUEUE_FULL;
+ }
+
+ /* Got the lock. Send optional NOP if queue not full, */
+ if (head != limit) {
+ if (send_noop_message(cb, mq, mesg)) {
+ gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half),
+ XTYPE_DW, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ goto cberr;
+ STAT(mesq_qf_noop_not_full);
+ return MQIE_AGAIN;
+ }
+ avalue++;
+ }
+
+ /* Then flip queuehead to other half of queue. */
+ gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ goto cberr;
+
+ /* If not successfully in swapping queue head, clear the hstatus lock */
+ if (gru_get_amo_value(cb) != avalue) {
+ STAT(mesq_qf_switch_head_failed);
+ gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ goto cberr;
+ }
+ return MQIE_AGAIN;
+cberr:
+ STAT(mesq_qf_unexpected_error);
+ return MQE_UNEXPECTED_CB_ERR;
+}
+
+
+/*
+ * Handle a gru_mesq failure. Some of these failures are software recoverable
+ * or retryable.
+ */
+static int send_message_failure(void *cb,
+ unsigned long mq,
+ void *mesg,
+ int lines)
+{
+ int substatus, ret = 0;
+ unsigned long m;
+
+ substatus = gru_get_cb_message_queue_substatus(cb);
+ switch (substatus) {
+ case CBSS_NO_ERROR:
+ STAT(mesq_send_unexpected_error);
+ ret = MQE_UNEXPECTED_CB_ERR;
+ break;
+ case CBSS_LB_OVERFLOWED:
+ STAT(mesq_send_lb_overflow);
+ ret = MQE_CONGESTION;
+ break;
+ case CBSS_QLIMIT_REACHED:
+ STAT(mesq_send_qlimit_reached);
+ ret = send_message_queue_full(cb, mq, mesg, lines);
+ break;
+ case CBSS_AMO_NACKED:
+ STAT(mesq_send_amo_nacked);
+ ret = MQE_CONGESTION;
+ break;
+ case CBSS_PUT_NACKED:
+ STAT(mesq_send_put_nacked);
+ m =mq + (gru_get_amo_value_head(cb) << 6);
+ gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+ if (gru_wait(cb) == CBS_IDLE)
+ ret = MQE_OK;
+ else
+ ret = MQE_UNEXPECTED_CB_ERR;
+ break;
+ default:
+ BUG();
+ }
+ return ret;
+}
+
+/*
+ * Send a message to a message queue
+ * cb GRU control block to use to send message
+ * mq message queue
+ * mesg message. ust be vaddr within a GSEG
+ * bytes message size (<= 2 CL)
+ */
+int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes)
+{
+ struct message_header *mhdr;
+ void *cb;
+ void *dsr;
+ int istatus, clines, ret;
+
+ STAT(mesq_send);
+ BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES);
+
+ clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES;
+ if (gru_get_cpu_resources(bytes, &cb, &dsr))
+ return MQE_BUG_NO_RESOURCES;
+ memcpy(dsr, mesg, bytes);
+ mhdr = dsr;
+ mhdr->present = MQS_FULL;
+ mhdr->lines = clines;
+ if (clines == 2) {
+ mhdr->present2 = get_present2(mhdr);
+ restore_present2(mhdr, MQS_FULL);
+ }
+
+ do {
+ ret = MQE_OK;
+ gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA);
+ istatus = gru_wait(cb);
+ if (istatus != CBS_IDLE)
+ ret = send_message_failure(cb, mq, dsr, clines);
+ } while (ret == MQIE_AGAIN);
+ gru_free_cpu_resources(cb, dsr);
+
+ if (ret)
+ STAT(mesq_send_failed);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gru_send_message_gpa);
+
+/*
+ * Advance the receive pointer for the queue to the next message.
+ */
+void gru_free_message(void *rmq, void *mesg)
+{
+ struct message_queue *mq = rmq;
+ struct message_header *mhdr = mq->next;
+ void *next, *pnext;
+ int half = -1;
+ int lines = mhdr->lines;
+
+ if (lines == 2)
+ restore_present2(mhdr, MQS_EMPTY);
+ mhdr->present = MQS_EMPTY;
+
+ pnext = mq->next;
+ next = pnext + GRU_CACHE_LINE_BYTES * lines;
+ if (next == mq->limit) {
+ next = mq->start;
+ half = 1;
+ } else if (pnext < mq->start2 && next >= mq->start2) {
+ half = 0;
+ }
+
+ if (half >= 0)
+ mq->hstatus[half] = 1;
+ mq->next = next;
+}
+EXPORT_SYMBOL_GPL(gru_free_message);
+
+/*
+ * Get next message from message queue. Return NULL if no message
+ * present. User must call next_message() to move to next message.
+ * rmq message queue
+ */
+void *gru_get_next_message(void *rmq)
+{
+ struct message_queue *mq = rmq;
+ struct message_header *mhdr = mq->next;
+ int present = mhdr->present;
+
+ /* skip NOOP messages */
+ STAT(mesq_receive);
+ while (present == MQS_NOOP) {
+ gru_free_message(rmq, mhdr);
+ mhdr = mq->next;
+ present = mhdr->present;
+ }
+
+ /* Wait for both halves of 2 line messages */
+ if (present == MQS_FULL && mhdr->lines == 2 &&
+ get_present2(mhdr) == MQS_EMPTY)
+ present = MQS_EMPTY;
+
+ if (!present) {
+ STAT(mesq_receive_none);
+ return NULL;
+ }
+
+ if (mhdr->lines == 2)
+ restore_present2(mhdr, mhdr->present2);
+
+ return mhdr;
+}
+EXPORT_SYMBOL_GPL(gru_get_next_message);
+
+/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/
+
+/*
+ * Copy a block of data using the GRU resources
+ */
+int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+ unsigned int bytes)
+{
+ void *cb;
+ void *dsr;
+ int ret;
+
+ STAT(copy_gpa);
+ if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr))
+ return MQE_BUG_NO_RESOURCES;
+ gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr),
+ XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA);
+ ret = gru_wait(cb);
+ gru_free_cpu_resources(cb, dsr);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gru_copy_gpa);
+
+/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
+/* Temp - will delete after we gain confidence in the GRU */
+static __cacheline_aligned unsigned long word0;
+static __cacheline_aligned unsigned long word1;
+
+static int quicktest(struct gru_state *gru)
+{
+ void *cb;
+ void *ds;
+ unsigned long *p;
+
+ cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+ ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+ p = ds;
+ word0 = MAGIC;
+
+ gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ BUG();
+
+ if (*(unsigned long *)ds != MAGIC)
+ BUG();
+ gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
+ if (gru_wait(cb) != CBS_IDLE)
+ BUG();
+
+ if (word0 != word1 || word0 != MAGIC) {
+ printk
+ ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n",
+ gru->gs_gid, word1, MAGIC);
+ BUG(); /* ZZZ should not be fatal */
+ }
+
+ return 0;
+}
+
+
+int gru_kservices_init(struct gru_state *gru)
+{
+ struct gru_blade_state *bs;
+ struct gru_context_configuration_handle *cch;
+ unsigned long cbr_map, dsr_map;
+ int err, num, cpus_possible;
+
+ /*
+ * Currently, resources are reserved ONLY on the second chiplet
+ * on each blade. This leaves ALL resources on chiplet 0 available
+ * for user code.
+ */
+ bs = gru->gs_blade;
+ if (gru != &bs->bs_grus[1])
+ return 0;
+
+ cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+ num = GRU_NUM_KERNEL_CBR * cpus_possible;
+ cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
+ gru->gs_reserved_cbrs += num;
+
+ num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
+ dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
+ gru->gs_reserved_dsr_bytes += num;
+
+ gru->gs_active_contexts++;
+ __set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
+ cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
+
+ bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
+ KERNEL_CTXNUM, 0);
+ bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
+ KERNEL_CTXNUM, 0);
+
+ lock_cch_handle(cch);
+ cch->tfm_fault_bit_enable = 0;
+ cch->tlb_int_enable = 0;
+ cch->tfm_done_bit_enable = 0;
+ cch->unmap_enable = 1;
+ err = cch_allocate(cch, 0, cbr_map, dsr_map);
+ if (err) {
+ gru_dbg(grudev,
+ "Unable to allocate kernel CCH: gru %d, err %d\n",
+ gru->gs_gid, err);
+ BUG();
+ }
+ if (cch_start(cch)) {
+ gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n",
+ gru->gs_gid, err);
+ BUG();
+ }
+ unlock_cch_handle(cch);
+
+ if (gru_options & GRU_QUICKLOOK)
+ quicktest(gru);
+ return 0;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
new file mode 100644
index 0000000..eb17e0a
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -0,0 +1,134 @@
+
+/*
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __GRU_KSERVICES_H_
+#define __GRU_KSERVICES_H_
+
+
+/*
+ * Message queues using the GRU to send/receive messages.
+ *
+ * These function allow the user to create a message queue for
+ * sending/receiving 1 or 2 cacheline messages using the GRU.
+ *
+ * Processes SENDING messages will use a kernel CBR/DSR to send
+ * the message. This is transparent to the caller.
+ *
+ * The receiver does not use any GRU resources.
+ *
+ * The functions support:
+ * - single receiver
+ * - multiple senders
+ * - cross partition message
+ *
+ * Missing features ZZZ:
+ * - user options for dealing with timeouts, queue full, etc.
+ * - gru_create_message_queue() needs interrupt vector info
+ */
+
+/*
+ * Initialize a user allocated chunk of memory to be used as
+ * a message queue. The caller must ensure that the queue is
+ * in contiguous physical memory and is cacheline aligned.
+ *
+ * Message queue size is the total number of bytes allocated
+ * to the queue including a 2 cacheline header that is used
+ * to manage the queue.
+ *
+ * Input:
+ * p pointer to user allocated memory.
+ * bytes size of message queue in bytes
+ *
+ * Errors:
+ * 0 OK
+ * >0 error
+ */
+extern int gru_create_message_queue(void *p, unsigned int bytes);
+
+/*
+ * Send a message to a message queue.
+ *
+ * Note: The message queue transport mechanism uses the first 32
+ * bits of the message. Users should avoid using these bits.
+ *
+ *
+ * Input:
+ * xmq message queue - must be a UV global physical address
+ * mesg pointer to message. Must be 64-bit aligned
+ * bytes size of message in bytes
+ *
+ * Output:
+ * 0 message sent
+ * >0 Send failure - see error codes below
+ *
+ */
+extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg,
+ unsigned int bytes);
+
+/* Status values for gru_send_message() */
+#define MQE_OK 0 /* message sent successfully */
+#define MQE_CONGESTION 1 /* temporary congestion, try again */
+#define MQE_QUEUE_FULL 2 /* queue is full */
+#define MQE_UNEXPECTED_CB_ERR 3 /* unexpected CB error */
+#define MQE_PAGE_OVERFLOW 10 /* BUG - queue overflowed a page */
+#define MQE_BUG_NO_RESOURCES 11 /* BUG - could not alloc GRU cb/dsr */
+
+/*
+ * Advance the receive pointer for the message queue to the next message.
+ * Note: current API requires messages to be gotten & freed in order. Future
+ * API extensions may allow for out-of-order freeing.
+ *
+ * Input
+ * mq message queue
+ * mesq message being freed
+ */
+extern void gru_free_message(void *mq, void *mesq);
+
+/*
+ * Get next message from message queue. Returns pointer to
+ * message OR NULL if no message present.
+ * User must call gru_free_message() after message is processed
+ * in order to move the queue pointers to next message.
+ *
+ * Input
+ * mq message queue
+ *
+ * Output:
+ * p pointer to message
+ * NULL no message available
+ */
+extern void *gru_get_next_message(void *mq);
+
+
+/*
+ * Copy data using the GRU. Source or destination can be located in a remote
+ * partition.
+ *
+ * Input:
+ * dest_gpa destination global physical address
+ * src_gpa source global physical address
+ * bytes number of bytes to copy
+ *
+ * Output:
+ * 0 OK
+ * >0 error
+ */
+extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+ unsigned int bytes);
+
+#endif /* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
new file mode 100644
index 0000000..e56e196
--- /dev/null
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __GRULIB_H__
+#define __GRULIB_H__
+
+#define GRU_BASENAME "gru"
+#define GRU_FULLNAME "/dev/gru"
+#define GRU_IOCTL_NUM 'G'
+
+/*
+ * Maximum number of GRU segments that a user can have open
+ * ZZZ temp - set high for testing. Revisit.
+ */
+#define GRU_MAX_OPEN_CONTEXTS 32
+
+/* Set Number of Request Blocks */
+#define GRU_CREATE_CONTEXT _IOWR(GRU_IOCTL_NUM, 1, void *)
+
+/* Register task as using the slice */
+#define GRU_SET_TASK_SLICE _IOWR(GRU_IOCTL_NUM, 5, void *)
+
+/* Fetch exception detail */
+#define GRU_USER_GET_EXCEPTION_DETAIL _IOWR(GRU_IOCTL_NUM, 6, void *)
+
+/* For user call_os handling - normally a TLB fault */
+#define GRU_USER_CALL_OS _IOWR(GRU_IOCTL_NUM, 8, void *)
+
+/* For user unload context */
+#define GRU_USER_UNLOAD_CONTEXT _IOWR(GRU_IOCTL_NUM, 9, void *)
+
+/* For fetching GRU chiplet status */
+#define GRU_GET_CHIPLET_STATUS _IOWR(GRU_IOCTL_NUM, 10, void *)
+
+/* For user TLB flushing (primarily for tests) */
+#define GRU_USER_FLUSH_TLB _IOWR(GRU_IOCTL_NUM, 50, void *)
+
+/* Get some config options (primarily for tests & emulator) */
+#define GRU_GET_CONFIG_INFO _IOWR(GRU_IOCTL_NUM, 51, void *)
+
+#define CONTEXT_WINDOW_BYTES(th) (GRU_GSEG_PAGESIZE * (th))
+#define THREAD_POINTER(p, th) (p + GRU_GSEG_PAGESIZE * (th))
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_create_context_req {
+ unsigned long gseg;
+ unsigned int data_segment_bytes;
+ unsigned int control_blocks;
+ unsigned int maximum_thread_count;
+ unsigned int options;
+};
+
+/*
+ * Structure used to pass unload context parameters to the driver
+ */
+struct gru_unload_context_req {
+ unsigned long gseg;
+};
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_flush_tlb_req {
+ unsigned long gseg;
+ unsigned long vaddr;
+ size_t len;
+};
+
+/*
+ * GRU configuration info (temp - for testing)
+ */
+struct gru_config_info {
+ int cpus;
+ int blades;
+ int nodes;
+ int chiplets;
+ int fill[16];
+};
+
+#endif /* __GRULIB_H__ */
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
new file mode 100644
index 0000000..0eeb8dd
--- /dev/null
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -0,0 +1,802 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+
+unsigned long gru_options __read_mostly;
+
+static struct device_driver gru_driver = {
+ .name = "gru"
+};
+
+static struct device gru_device = {
+ .bus_id = {0},
+ .driver = &gru_driver,
+};
+
+struct device *grudev = &gru_device;
+
+/*
+ * Select a gru fault map to be used by the current cpu. Note that
+ * multiple cpus may be using the same map.
+ * ZZZ should "shift" be used?? Depends on HT cpu numbering
+ * ZZZ should be inline but did not work on emulator
+ */
+int gru_cpu_fault_map_id(void)
+{
+ return uv_blade_processor_id() % GRU_NUM_TFM;
+}
+
+/*--------- ASID Management -------------------------------------------
+ *
+ * Initially, assign asids sequentially from MIN_ASID .. MAX_ASID.
+ * Once MAX is reached, flush the TLB & start over. However,
+ * some asids may still be in use. There won't be many (percentage wise) still
+ * in use. Search active contexts & determine the value of the first
+ * asid in use ("x"s below). Set "limit" to this value.
+ * This defines a block of assignable asids.
+ *
+ * When "limit" is reached, search forward from limit+1 and determine the
+ * next block of assignable asids.
+ *
+ * Repeat until MAX_ASID is reached, then start over again.
+ *
+ * Each time MAX_ASID is reached, increment the asid generation. Since
+ * the search for in-use asids only checks contexts with GRUs currently
+ * assigned, asids in some contexts will be missed. Prior to loading
+ * a context, the asid generation of the GTS asid is rechecked. If it
+ * doesn't match the current generation, a new asid will be assigned.
+ *
+ * 0---------------x------------x---------------------x----|
+ * ^-next ^-limit ^-MAX_ASID
+ *
+ * All asid manipulation & context loading/unloading is protected by the
+ * gs_lock.
+ */
+
+/* Hit the asid limit. Start over */
+static int gru_wrap_asid(struct gru_state *gru)
+{
+ gru_dbg(grudev, "gru %p\n", gru);
+ STAT(asid_wrap);
+ gru->gs_asid_gen++;
+ gru_flush_all_tlb(gru);
+ return MIN_ASID;
+}
+
+/* Find the next chunk of unused asids */
+static int gru_reset_asid_limit(struct gru_state *gru, int asid)
+{
+ int i, gid, inuse_asid, limit;
+
+ gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+ STAT(asid_next);
+ limit = MAX_ASID;
+ if (asid >= limit)
+ asid = gru_wrap_asid(gru);
+ gid = gru->gs_gid;
+again:
+ for (i = 0; i < GRU_NUM_CCH; i++) {
+ if (!gru->gs_gts[i])
+ continue;
+ inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
+ gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n",
+ gru, inuse_asid, i, gru->gs_gts[i]);
+ if (inuse_asid == asid) {
+ asid += ASID_INC;
+ if (asid >= limit) {
+ /*
+ * empty range: reset the range limit and
+ * start over
+ */
+ limit = MAX_ASID;
+ if (asid >= MAX_ASID)
+ asid = gru_wrap_asid(gru);
+ goto again;
+ }
+ }
+
+ if ((inuse_asid > asid) && (inuse_asid < limit))
+ limit = inuse_asid;
+ }
+ gru->gs_asid_limit = limit;
+ gru->gs_asid = asid;
+ gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid,
+ limit);
+ return asid;
+}
+
+/* Assign a new ASID to a thread context. */
+static int gru_assign_asid(struct gru_state *gru)
+{
+ int asid;
+
+ spin_lock(&gru->gs_asid_lock);
+ gru->gs_asid += ASID_INC;
+ asid = gru->gs_asid;
+ if (asid >= gru->gs_asid_limit)
+ asid = gru_reset_asid_limit(gru, asid);
+ spin_unlock(&gru->gs_asid_lock);
+
+ gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+ return asid;
+}
+
+/*
+ * Clear n bits in a word. Return a word indicating the bits that were cleared.
+ * Optionally, build an array of chars that contain the bit numbers allocated.
+ */
+static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
+ char *idx)
+{
+ unsigned long bits = 0;
+ int i;
+
+ do {
+ i = find_first_bit(p, mmax);
+ if (i == mmax)
+ BUG();
+ __clear_bit(i, p);
+ __set_bit(i, &bits);
+ if (idx)
+ *idx++ = i;
+ } while (--n);
+ return bits;
+}
+
+unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count,
+ char *cbmap)
+{
+ return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU,
+ cbmap);
+}
+
+unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count,
+ char *dsmap)
+{
+ return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU,
+ dsmap);
+}
+
+static void reserve_gru_resources(struct gru_state *gru,
+ struct gru_thread_state *gts)
+{
+ gru->gs_active_contexts++;
+ gts->ts_cbr_map =
+ gru_reserve_cb_resources(gru, gts->ts_cbr_au_count,
+ gts->ts_cbr_idx);
+ gts->ts_dsr_map =
+ gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL);
+}
+
+static void free_gru_resources(struct gru_state *gru,
+ struct gru_thread_state *gts)
+{
+ gru->gs_active_contexts--;
+ gru->gs_cbr_map |= gts->ts_cbr_map;
+ gru->gs_dsr_map |= gts->ts_dsr_map;
+}
+
+/*
+ * Check if a GRU has sufficient free resources to satisfy an allocation
+ * request. Note: GRU locks may or may not be held when this is called. If
+ * not held, recheck after acquiring the appropriate locks.
+ *
+ * Returns 1 if sufficient resources, 0 if not
+ */
+static int check_gru_resources(struct gru_state *gru, int cbr_au_count,
+ int dsr_au_count, int max_active_contexts)
+{
+ return hweight64(gru->gs_cbr_map) >= cbr_au_count
+ && hweight64(gru->gs_dsr_map) >= dsr_au_count
+ && gru->gs_active_contexts < max_active_contexts;
+}
+
+/*
+ * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG
+ * context.
+ */
+static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms,
+ int ctxnum)
+{
+ struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid];
+ unsigned short ctxbitmap = (1 << ctxnum);
+ int asid;
+
+ spin_lock(&gms->ms_asid_lock);
+ asid = asids->mt_asid;
+
+ if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) {
+ asid = gru_assign_asid(gru);
+ asids->mt_asid = asid;
+ asids->mt_asid_gen = gru->gs_asid_gen;
+ STAT(asid_new);
+ } else {
+ STAT(asid_reuse);
+ }
+
+ BUG_ON(asids->mt_ctxbitmap & ctxbitmap);
+ asids->mt_ctxbitmap |= ctxbitmap;
+ if (!test_bit(gru->gs_gid, gms->ms_asidmap))
+ __set_bit(gru->gs_gid, gms->ms_asidmap);
+ spin_unlock(&gms->ms_asid_lock);
+
+ gru_dbg(grudev,
+ "gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n",
+ gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]);
+ return asid;
+}
+
+static void gru_unload_mm_tracker(struct gru_state *gru,
+ struct gru_mm_struct *gms, int ctxnum)
+{
+ struct gru_mm_tracker *asids;
+ unsigned short ctxbitmap;
+
+ asids = &gms->ms_asids[gru->gs_gid];
+ ctxbitmap = (1 << ctxnum);
+ spin_lock(&gms->ms_asid_lock);
+ BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap);
+ asids->mt_ctxbitmap ^= ctxbitmap;
+ gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
+ gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]);
+ spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Decrement the reference count on a GTS structure. Free the structure
+ * if the reference count goes to zero.
+ */
+void gts_drop(struct gru_thread_state *gts)
+{
+ if (gts && atomic_dec_return(>s->ts_refcnt) == 0) {
+ gru_drop_mmu_notifier(gts->ts_gms);
+ kfree(gts);
+ STAT(gts_free);
+ }
+}
+
+/*
+ * Locate the GTS structure for the current thread.
+ */
+static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
+ *vdata, int tsid)
+{
+ struct gru_thread_state *gts;
+
+ list_for_each_entry(gts, &vdata->vd_head, ts_next)
+ if (gts->ts_tsid == tsid)
+ return gts;
+ return NULL;
+}
+
+/*
+ * Allocate a thread state structure.
+ */
+static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+ struct gru_vma_data *vdata,
+ int tsid)
+{
+ struct gru_thread_state *gts;
+ int bytes;
+
+ bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
+ CBR_BYTES(vdata->vd_cbr_au_count);
+ bytes += sizeof(struct gru_thread_state);
+ gts = kzalloc(bytes, GFP_KERNEL);
+ if (!gts)
+ return NULL;
+
+ STAT(gts_alloc);
+ atomic_set(>s->ts_refcnt, 1);
+ mutex_init(>s->ts_ctxlock);
+ gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
+ gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
+ gts->ts_user_options = vdata->vd_user_options;
+ gts->ts_tsid = tsid;
+ gts->ts_user_options = vdata->vd_user_options;
+ gts->ts_ctxnum = NULLCTX;
+ gts->ts_mm = current->mm;
+ gts->ts_vma = vma;
+ gts->ts_tlb_int_select = -1;
+ gts->ts_gms = gru_register_mmu_notifier();
+ if (!gts->ts_gms)
+ goto err;
+
+ gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+ return gts;
+
+err:
+ gts_drop(gts);
+ return NULL;
+}
+
+/*
+ * Allocate a vma private data structure.
+ */
+struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid)
+{
+ struct gru_vma_data *vdata = NULL;
+
+ vdata = kmalloc(sizeof(*vdata), GFP_KERNEL);
+ if (!vdata)
+ return NULL;
+
+ INIT_LIST_HEAD(&vdata->vd_head);
+ spin_lock_init(&vdata->vd_lock);
+ gru_dbg(grudev, "alloc vdata %p\n", vdata);
+ return vdata;
+}
+
+/*
+ * Find the thread state structure for the current thread.
+ */
+struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma,
+ int tsid)
+{
+ struct gru_vma_data *vdata = vma->vm_private_data;
+ struct gru_thread_state *gts;
+
+ spin_lock(&vdata->vd_lock);
+ gts = gru_find_current_gts_nolock(vdata, tsid);
+ spin_unlock(&vdata->vd_lock);
+ gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+ return gts;
+}
+
+/*
+ * Allocate a new thread state for a GSEG. Note that races may allow
+ * another thread to race to create a gts.
+ */
+struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
+ int tsid)
+{
+ struct gru_vma_data *vdata = vma->vm_private_data;
+ struct gru_thread_state *gts, *ngts;
+
+ gts = gru_alloc_gts(vma, vdata, tsid);
+ if (!gts)
+ return NULL;
+
+ spin_lock(&vdata->vd_lock);
+ ngts = gru_find_current_gts_nolock(vdata, tsid);
+ if (ngts) {
+ gts_drop(gts);
+ gts = ngts;
+ STAT(gts_double_allocate);
+ } else {
+ list_add(>s->ts_next, &vdata->vd_head);
+ }
+ spin_unlock(&vdata->vd_lock);
+ gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+ return gts;
+}
+
+/*
+ * Free the GRU context assigned to the thread state.
+ */
+static void gru_free_gru_context(struct gru_thread_state *gts)
+{
+ struct gru_state *gru;
+
+ gru = gts->ts_gru;
+ gru_dbg(grudev, "gts %p, gru %p\n", gts, gru);
+
+ spin_lock(&gru->gs_lock);
+ gru->gs_gts[gts->ts_ctxnum] = NULL;
+ free_gru_resources(gru, gts);
+ BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0);
+ __clear_bit(gts->ts_ctxnum, &gru->gs_context_map);
+ gts->ts_ctxnum = NULLCTX;
+ gts->ts_gru = NULL;
+ spin_unlock(&gru->gs_lock);
+
+ gts_drop(gts);
+ STAT(free_context);
+}
+
+/*
+ * Prefetching cachelines help hardware performance.
+ * (Strictly a performance enhancement. Not functionally required).
+ */
+static void prefetch_data(void *p, int num, int stride)
+{
+ while (num-- > 0) {
+ prefetchw(p);
+ p += stride;
+ }
+}
+
+static inline long gru_copy_handle(void *d, void *s)
+{
+ memcpy(d, s, GRU_HANDLE_BYTES);
+ return GRU_HANDLE_BYTES;
+}
+
+/* rewrite in assembly & use lots of prefetch */
+static void gru_load_context_data(void *save, void *grubase, int ctxnum,
+ unsigned long cbrmap, unsigned long dsrmap)
+{
+ void *gseg, *cb, *cbe;
+ unsigned long length;
+ int i, scr;
+
+ gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+ length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+ prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES,
+ GRU_CACHE_LINE_BYTES);
+
+ cb = gseg + GRU_CB_BASE;
+ cbe = grubase + GRU_CBE_BASE;
+ for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+ prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES);
+ prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1,
+ GRU_CACHE_LINE_BYTES);
+ cb += GRU_HANDLE_STRIDE;
+ }
+
+ cb = gseg + GRU_CB_BASE;
+ for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+ save += gru_copy_handle(cb, save);
+ save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+ cb += GRU_HANDLE_STRIDE;
+ }
+
+ memcpy(gseg + GRU_DS_BASE, save, length);
+}
+
+static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
+ unsigned long cbrmap, unsigned long dsrmap)
+{
+ void *gseg, *cb, *cbe;
+ unsigned long length;
+ int i, scr;
+
+ gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+
+ cb = gseg + GRU_CB_BASE;
+ cbe = grubase + GRU_CBE_BASE;
+ for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+ save += gru_copy_handle(save, cb);
+ save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE);
+ cb += GRU_HANDLE_STRIDE;
+ }
+ length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+ memcpy(save, gseg + GRU_DS_BASE, length);
+}
+
+void gru_unload_context(struct gru_thread_state *gts, int savestate)
+{
+ struct gru_state *gru = gts->ts_gru;
+ struct gru_context_configuration_handle *cch;
+ int ctxnum = gts->ts_ctxnum;
+
+ zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+ cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+ lock_cch_handle(cch);
+ if (cch_interrupt_sync(cch))
+ BUG();
+ gru_dbg(grudev, "gts %p\n", gts);
+
+ gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+ if (savestate)
+ gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
+ ctxnum, gts->ts_cbr_map,
+ gts->ts_dsr_map);
+
+ if (cch_deallocate(cch))
+ BUG();
+ gts->ts_force_unload = 0; /* ts_force_unload locked by CCH lock */
+ unlock_cch_handle(cch);
+
+ gru_free_gru_context(gts);
+ STAT(unload_context);
+}
+
+/*
+ * Load a GRU context by copying it from the thread data structure in memory
+ * to the GRU.
+ */
+static void gru_load_context(struct gru_thread_state *gts)
+{
+ struct gru_state *gru = gts->ts_gru;
+ struct gru_context_configuration_handle *cch;
+ int err, asid, ctxnum = gts->ts_ctxnum;
+
+ gru_dbg(grudev, "gts %p\n", gts);
+ cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+ lock_cch_handle(cch);
+ asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+ cch->tfm_fault_bit_enable =
+ (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+ || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+ cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+ if (cch->tlb_int_enable) {
+ gts->ts_tlb_int_select = gru_cpu_fault_map_id();
+ cch->tlb_int_select = gts->ts_tlb_int_select;
+ }
+ cch->tfm_done_bit_enable = 0;
+ err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map);
+ if (err) {
+ gru_dbg(grudev,
+ "err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
+ err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map);
+ BUG();
+ }
+
+ gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
+ gts->ts_cbr_map, gts->ts_dsr_map);
+
+ if (cch_start(cch))
+ BUG();
+ unlock_cch_handle(cch);
+
+ STAT(load_context);
+}
+
+/*
+ * Update fields in an active CCH:
+ * - retarget interrupts on local blade
+ * - force a delayed context unload by clearing the CCH asids. This
+ * forces TLB misses for new GRU instructions. The context is unloaded
+ * when the next TLB miss occurs.
+ */
+static int gru_update_cch(struct gru_thread_state *gts, int int_select)
+{
+ struct gru_context_configuration_handle *cch;
+ struct gru_state *gru = gts->ts_gru;
+ int i, ctxnum = gts->ts_ctxnum, ret = 0;
+
+ cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+ lock_cch_handle(cch);
+ if (cch->state == CCHSTATE_ACTIVE) {
+ if (gru->gs_gts[gts->ts_ctxnum] != gts)
+ goto exit;
+ if (cch_interrupt(cch))
+ BUG();
+ if (int_select >= 0) {
+ gts->ts_tlb_int_select = int_select;
+ cch->tlb_int_select = int_select;
+ } else {
+ for (i = 0; i < 8; i++)
+ cch->asid[i] = 0;
+ cch->tfm_fault_bit_enable = 0;
+ cch->tlb_int_enable = 0;
+ gts->ts_force_unload = 1;
+ }
+ if (cch_start(cch))
+ BUG();
+ ret = 1;
+ }
+exit:
+ unlock_cch_handle(cch);
+ return ret;
+}
+
+/*
+ * Update CCH tlb interrupt select. Required when all the following is true:
+ * - task's GRU context is loaded into a GRU
+ * - task is using interrupt notification for TLB faults
+ * - task has migrated to a different cpu on the same blade where
+ * it was previously running.
+ */
+static int gru_retarget_intr(struct gru_thread_state *gts)
+{
+ if (gts->ts_tlb_int_select < 0
+ || gts->ts_tlb_int_select == gru_cpu_fault_map_id())
+ return 0;
+
+ gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select,
+ gru_cpu_fault_map_id());
+ return gru_update_cch(gts, gru_cpu_fault_map_id());
+}
+
+
+/*
+ * Insufficient GRU resources available on the local blade. Steal a context from
+ * a process. This is a hack until a _real_ resource scheduler is written....
+ */
+#define next_ctxnum(n) ((n) < GRU_NUM_CCH - 2 ? (n) + 1 : 0)
+#define next_gru(b, g) (((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ? \
+ ((g)+1) : &(b)->bs_grus[0])
+
+static void gru_steal_context(struct gru_thread_state *gts)
+{
+ struct gru_blade_state *blade;
+ struct gru_state *gru, *gru0;
+ struct gru_thread_state *ngts = NULL;
+ int ctxnum, ctxnum0, flag = 0, cbr, dsr;
+
+ cbr = gts->ts_cbr_au_count;
+ dsr = gts->ts_dsr_au_count;
+
+ preempt_disable();
+ blade = gru_base[uv_numa_blade_id()];
+ spin_lock(&blade->bs_lock);
+
+ ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
+ gru = blade->bs_lru_gru;
+ if (ctxnum == 0)
+ gru = next_gru(blade, gru);
+ ctxnum0 = ctxnum;
+ gru0 = gru;
+ while (1) {
+ if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH))
+ break;
+ spin_lock(&gru->gs_lock);
+ for (; ctxnum < GRU_NUM_CCH; ctxnum++) {
+ if (flag && gru == gru0 && ctxnum == ctxnum0)
+ break;
+ ngts = gru->gs_gts[ctxnum];
+ /*
+ * We are grabbing locks out of order, so trylock is
+ * needed. GTSs are usually not locked, so the odds of
+ * success are high. If trylock fails, try to steal a
+ * different GSEG.
+ */
+ if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+ break;
+ ngts = NULL;
+ flag = 1;
+ }
+ spin_unlock(&gru->gs_lock);
+ if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0))
+ break;
+ ctxnum = 0;
+ gru = next_gru(blade, gru);
+ }
+ blade->bs_lru_gru = gru;
+ blade->bs_lru_ctxnum = ctxnum;
+ spin_unlock(&blade->bs_lock);
+ preempt_enable();
+
+ if (ngts) {
+ STAT(steal_context);
+ ngts->ts_steal_jiffies = jiffies;
+ gru_unload_context(ngts, 1);
+ mutex_unlock(&ngts->ts_ctxlock);
+ } else {
+ STAT(steal_context_failed);
+ }
+ gru_dbg(grudev,
+ "stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;"
+ " avail cb %ld, ds %ld\n",
+ gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map),
+ hweight64(gru->gs_dsr_map));
+}
+
+/*
+ * Scan the GRUs on the local blade & assign a GRU context.
+ */
+static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+{
+ struct gru_state *gru, *grux;
+ int i, max_active_contexts;
+
+ preempt_disable();
+
+again:
+ gru = NULL;
+ max_active_contexts = GRU_NUM_CCH;
+ for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+ if (check_gru_resources(grux, gts->ts_cbr_au_count,
+ gts->ts_dsr_au_count,
+ max_active_contexts)) {
+ gru = grux;
+ max_active_contexts = grux->gs_active_contexts;
+ if (max_active_contexts == 0)
+ break;
+ }
+ }
+
+ if (gru) {
+ spin_lock(&gru->gs_lock);
+ if (!check_gru_resources(gru, gts->ts_cbr_au_count,
+ gts->ts_dsr_au_count, GRU_NUM_CCH)) {
+ spin_unlock(&gru->gs_lock);
+ goto again;
+ }
+ reserve_gru_resources(gru, gts);
+ gts->ts_gru = gru;
+ gts->ts_ctxnum =
+ find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH);
+ BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH);
+ atomic_inc(>s->ts_refcnt);
+ gru->gs_gts[gts->ts_ctxnum] = gts;
+ __set_bit(gts->ts_ctxnum, &gru->gs_context_map);
+ spin_unlock(&gru->gs_lock);
+
+ STAT(assign_context);
+ gru_dbg(grudev,
+ "gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n",
+ gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts,
+ gts->ts_gru->gs_gid, gts->ts_ctxnum,
+ gts->ts_cbr_au_count, gts->ts_dsr_au_count);
+ } else {
+ gru_dbg(grudev, "failed to allocate a GTS %s\n", "");
+ STAT(assign_context_failed);
+ }
+
+ preempt_enable();
+ return gru;
+}
+
+/*
+ * gru_nopage
+ *
+ * Map the user's GRU segment
+ *
+ * Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries.
+ */
+int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct gru_thread_state *gts;
+ unsigned long paddr, vaddr;
+
+ vaddr = (unsigned long)vmf->virtual_address;
+ gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
+ vma, vaddr, GSEG_BASE(vaddr));
+ STAT(nopfn);
+
+ /* The following check ensures vaddr is a valid address in the VMA */
+ gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+ if (!gts)
+ return VM_FAULT_SIGBUS;
+
+again:
+ preempt_disable();
+ mutex_lock(>s->ts_ctxlock);
+ if (gts->ts_gru) {
+ if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+ STAT(migrated_nopfn_unload);
+ gru_unload_context(gts, 1);
+ } else {
+ if (gru_retarget_intr(gts))
+ STAT(migrated_nopfn_retarget);
+ }
+ }
+
+ if (!gts->ts_gru) {
+ if (!gru_assign_gru_context(gts)) {
+ mutex_unlock(>s->ts_ctxlock);
+ preempt_enable();
+ schedule_timeout(GRU_ASSIGN_DELAY); /* true hack ZZZ */
+ if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
+ gru_steal_context(gts);
+ goto again;
+ }
+ gru_load_context(gts);
+ paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum);
+ remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1),
+ paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE,
+ vma->vm_page_prot);
+ }
+
+ mutex_unlock(>s->ts_ctxlock);
+ preempt_enable();
+
+ return VM_FAULT_NOPAGE;
+}
+
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
new file mode 100644
index 0000000..533923f
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -0,0 +1,336 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * PROC INTERFACES
+ *
+ * This file supports the /proc interfaces for the GRU driver
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#define printstat(s, f) printstat_val(s, &gru_stats.f, #f)
+
+static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id)
+{
+ unsigned long val = atomic_long_read(v);
+
+ if (val)
+ seq_printf(s, "%16lu %s\n", val, id);
+}
+
+static int statistics_show(struct seq_file *s, void *p)
+{
+ printstat(s, vdata_alloc);
+ printstat(s, vdata_free);
+ printstat(s, gts_alloc);
+ printstat(s, gts_free);
+ printstat(s, vdata_double_alloc);
+ printstat(s, gts_double_allocate);
+ printstat(s, assign_context);
+ printstat(s, assign_context_failed);
+ printstat(s, free_context);
+ printstat(s, load_context);
+ printstat(s, unload_context);
+ printstat(s, steal_context);
+ printstat(s, steal_context_failed);
+ printstat(s, nopfn);
+ printstat(s, break_cow);
+ printstat(s, asid_new);
+ printstat(s, asid_next);
+ printstat(s, asid_wrap);
+ printstat(s, asid_reuse);
+ printstat(s, intr);
+ printstat(s, call_os);
+ printstat(s, call_os_check_for_bug);
+ printstat(s, call_os_wait_queue);
+ printstat(s, user_flush_tlb);
+ printstat(s, user_unload_context);
+ printstat(s, user_exception);
+ printstat(s, set_task_slice);
+ printstat(s, migrate_check);
+ printstat(s, migrated_retarget);
+ printstat(s, migrated_unload);
+ printstat(s, migrated_unload_delay);
+ printstat(s, migrated_nopfn_retarget);
+ printstat(s, migrated_nopfn_unload);
+ printstat(s, tlb_dropin);
+ printstat(s, tlb_dropin_fail_no_asid);
+ printstat(s, tlb_dropin_fail_upm);
+ printstat(s, tlb_dropin_fail_invalid);
+ printstat(s, tlb_dropin_fail_range_active);
+ printstat(s, tlb_dropin_fail_idle);
+ printstat(s, tlb_dropin_fail_fmm);
+ printstat(s, mmu_invalidate_range);
+ printstat(s, mmu_invalidate_page);
+ printstat(s, mmu_clear_flush_young);
+ printstat(s, flush_tlb);
+ printstat(s, flush_tlb_gru);
+ printstat(s, flush_tlb_gru_tgh);
+ printstat(s, flush_tlb_gru_zero_asid);
+ printstat(s, copy_gpa);
+ printstat(s, mesq_receive);
+ printstat(s, mesq_receive_none);
+ printstat(s, mesq_send);
+ printstat(s, mesq_send_failed);
+ printstat(s, mesq_noop);
+ printstat(s, mesq_send_unexpected_error);
+ printstat(s, mesq_send_lb_overflow);
+ printstat(s, mesq_send_qlimit_reached);
+ printstat(s, mesq_send_amo_nacked);
+ printstat(s, mesq_send_put_nacked);
+ printstat(s, mesq_qf_not_full);
+ printstat(s, mesq_qf_locked);
+ printstat(s, mesq_qf_noop_not_full);
+ printstat(s, mesq_qf_switch_head_failed);
+ printstat(s, mesq_qf_unexpected_error);
+ printstat(s, mesq_noop_unexpected_error);
+ printstat(s, mesq_noop_lb_overflow);
+ printstat(s, mesq_noop_qlimit_reached);
+ printstat(s, mesq_noop_amo_nacked);
+ printstat(s, mesq_noop_put_nacked);
+ return 0;
+}
+
+static ssize_t statistics_write(struct file *file, const char __user *userbuf,
+ size_t count, loff_t *data)
+{
+ memset(&gru_stats, 0, sizeof(gru_stats));
+ return count;
+}
+
+static int options_show(struct seq_file *s, void *p)
+{
+ seq_printf(s, "0x%lx\n", gru_options);
+ return 0;
+}
+
+static ssize_t options_write(struct file *file, const char __user *userbuf,
+ size_t count, loff_t *data)
+{
+ unsigned long val;
+ char buf[80];
+
+ if (copy_from_user
+ (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+ return -EFAULT;
+ if (!strict_strtoul(buf, 10, &val))
+ gru_options = val;
+
+ return count;
+}
+
+static int cch_seq_show(struct seq_file *file, void *data)
+{
+ long gid = *(long *)data;
+ int i;
+ struct gru_state *gru = GID_TO_GRU(gid);
+ struct gru_thread_state *ts;
+ const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" };
+
+ if (gid == 0)
+ seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid",
+ "ctx#", "pid", "cbrs", "dsbytes", "mode");
+ if (gru)
+ for (i = 0; i < GRU_NUM_CCH; i++) {
+ ts = gru->gs_gts[i];
+ if (!ts)
+ continue;
+ seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n",
+ gru->gs_gid, gru->gs_blade_id, i,
+ ts->ts_tgid_owner,
+ ts->ts_cbr_au_count * GRU_CBR_AU_SIZE,
+ ts->ts_cbr_au_count * GRU_DSR_AU_BYTES,
+ mode[ts->ts_user_options &
+ GRU_OPT_MISS_MASK]);
+ }
+
+ return 0;
+}
+
+static int gru_seq_show(struct seq_file *file, void *data)
+{
+ long gid = *(long *)data, ctxfree, cbrfree, dsrfree;
+ struct gru_state *gru = GID_TO_GRU(gid);
+
+ if (gid == 0) {
+ seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid",
+ "ctx", "cbr", "dsr", "ctx", "cbr", "dsr");
+ seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy",
+ "busy", "busy", "free", "free", "free");
+ }
+ if (gru) {
+ ctxfree = GRU_NUM_CCH - gru->gs_active_contexts;
+ cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+ dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+ seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n",
+ gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree,
+ GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree,
+ ctxfree, cbrfree, dsrfree);
+ }
+
+ return 0;
+}
+
+static void seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static void *seq_start(struct seq_file *file, loff_t *gid)
+{
+ if (*gid < GRU_MAX_GRUS)
+ return gid;
+ return NULL;
+}
+
+static void *seq_next(struct seq_file *file, void *data, loff_t *gid)
+{
+ (*gid)++;
+ if (*gid < GRU_MAX_GRUS)
+ return gid;
+ return NULL;
+}
+
+static const struct seq_operations cch_seq_ops = {
+ .start = seq_start,
+ .next = seq_next,
+ .stop = seq_stop,
+ .show = cch_seq_show
+};
+
+static const struct seq_operations gru_seq_ops = {
+ .start = seq_start,
+ .next = seq_next,
+ .stop = seq_stop,
+ .show = gru_seq_show
+};
+
+static int statistics_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, statistics_show, NULL);
+}
+
+static int options_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, options_show, NULL);
+}
+
+static int cch_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &cch_seq_ops);
+}
+
+static int gru_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &gru_seq_ops);
+}
+
+/* *INDENT-OFF* */
+static const struct file_operations statistics_fops = {
+ .open = statistics_open,
+ .read = seq_read,
+ .write = statistics_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations options_fops = {
+ .open = options_open,
+ .read = seq_read,
+ .write = options_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations cch_fops = {
+ .open = cch_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+static const struct file_operations gru_fops = {
+ .open = gru_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static struct proc_entry {
+ char *name;
+ int mode;
+ const struct file_operations *fops;
+ struct proc_dir_entry *entry;
+} proc_files[] = {
+ {"statistics", 0644, &statistics_fops},
+ {"debug_options", 0644, &options_fops},
+ {"cch_status", 0444, &cch_fops},
+ {"gru_status", 0444, &gru_fops},
+ {NULL}
+};
+/* *INDENT-ON* */
+
+static struct proc_dir_entry *proc_gru __read_mostly;
+
+static int create_proc_file(struct proc_entry *p)
+{
+ p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+ if (!p->entry)
+ return -1;
+ p->entry->proc_fops = p->fops;
+ return 0;
+}
+
+static void delete_proc_files(void)
+{
+ struct proc_entry *p;
+
+ if (proc_gru) {
+ for (p = proc_files; p->name; p++)
+ if (p->entry)
+ remove_proc_entry(p->name, proc_gru);
+ remove_proc_entry("gru", NULL);
+ }
+}
+
+int gru_proc_init(void)
+{
+ struct proc_entry *p;
+
+ proc_mkdir("sgi_uv", NULL);
+ proc_gru = proc_mkdir("sgi_uv/gru", NULL);
+
+ for (p = proc_files; p->name; p++)
+ if (create_proc_file(p))
+ goto err;
+ return 0;
+
+err:
+ delete_proc_files();
+ return -1;
+}
+
+void gru_proc_exit(void)
+{
+ delete_proc_files();
+}
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
new file mode 100644
index 0000000..4251018
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -0,0 +1,609 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * GRU DRIVER TABLES, MACROS, externs, etc
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __GRUTABLES_H__
+#define __GRUTABLES_H__
+
+/*
+ * GRU Chiplet:
+ * The GRU is a user addressible memory accelerator. It provides
+ * several forms of load, store, memset, bcopy instructions. In addition, it
+ * contains special instructions for AMOs, sending messages to message
+ * queues, etc.
+ *
+ * The GRU is an integral part of the node controller. It connects
+ * directly to the cpu socket. In its current implementation, there are 2
+ * GRU chiplets in the node controller on each blade (~node).
+ *
+ * The entire GRU memory space is fully coherent and cacheable by the cpus.
+ *
+ * Each GRU chiplet has a physical memory map that looks like the following:
+ *
+ * +-----------------+
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * |/////////////////|
+ * +-----------------+
+ * | system control |
+ * +-----------------+ _______ +-------------+
+ * |/////////////////| / | |
+ * |/////////////////| / | |
+ * |/////////////////| / | instructions|
+ * |/////////////////| / | |
+ * |/////////////////| / | |
+ * |/////////////////| / |-------------|
+ * |/////////////////| / | |
+ * +-----------------+ | |
+ * | context 15 | | data |
+ * +-----------------+ | |
+ * | ...... | \ | |
+ * +-----------------+ \____________ +-------------+
+ * | context 1 |
+ * +-----------------+
+ * | context 0 |
+ * +-----------------+
+ *
+ * Each of the "contexts" is a chunk of memory that can be mmaped into user
+ * space. The context consists of 2 parts:
+ *
+ * - an instruction space that can be directly accessed by the user
+ * to issue GRU instructions and to check instruction status.
+ *
+ * - a data area that acts as normal RAM.
+ *
+ * User instructions contain virtual addresses of data to be accessed by the
+ * GRU. The GRU contains a TLB that is used to convert these user virtual
+ * addresses to physical addresses.
+ *
+ * The "system control" area of the GRU chiplet is used by the kernel driver
+ * to manage user contexts and to perform functions such as TLB dropin and
+ * purging.
+ *
+ * One context may be reserved for the kernel and used for cross-partition
+ * communication. The GRU will also be used to asynchronously zero out
+ * large blocks of memory (not currently implemented).
+ *
+ *
+ * Tables:
+ *
+ * VDATA-VMA Data - Holds a few parameters. Head of linked list of
+ * GTS tables for threads using the GSEG
+ * GTS - Gru Thread State - contains info for managing a GSEG context. A
+ * GTS is allocated for each thread accessing a
+ * GSEG.
+ * GTD - GRU Thread Data - contains shadow copy of GRU data when GSEG is
+ * not loaded into a GRU
+ * GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs
+ * where a GSEG has been loaded. Similar to
+ * an mm_struct but for GRU.
+ *
+ * GS - GRU State - Used to manage the state of a GRU chiplet
+ * BS - Blade State - Used to manage state of all GRU chiplets
+ * on a blade
+ *
+ *
+ * Normal task tables for task using GRU.
+ * - 2 threads in process
+ * - 2 GSEGs open in process
+ * - GSEG1 is being used by both threads
+ * - GSEG2 is used only by thread 2
+ *
+ * task -->|
+ * task ---+---> mm ->------ (notifier) -------+-> gms
+ * | |
+ * |--> vma -> vdata ---> gts--->| GSEG1 (thread1)
+ * | | |
+ * | +-> gts--->| GSEG1 (thread2)
+ * | |
+ * |--> vma -> vdata ---> gts--->| GSEG2 (thread2)
+ * .
+ * .
+ *
+ * GSEGs are marked DONTCOPY on fork
+ *
+ * At open
+ * file.private_data -> NULL
+ *
+ * At mmap,
+ * vma -> vdata
+ *
+ * After gseg reference
+ * vma -> vdata ->gts
+ *
+ * After fork
+ * parent
+ * vma -> vdata -> gts
+ * child
+ * (vma is not copied)
+ *
+ */
+
+#include <linux/rmap.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/mmu_notifier.h>
+#include "gru.h"
+#include "gruhandles.h"
+
+extern struct gru_stats_s gru_stats;
+extern struct gru_blade_state *gru_base[];
+extern unsigned long gru_start_paddr, gru_end_paddr;
+
+#define GRU_MAX_BLADES MAX_NUMNODES
+#define GRU_MAX_GRUS (GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE)
+
+#define GRU_DRIVER_ID_STR "SGI GRU Device Driver"
+#define GRU_DRIVER_VERSION_STR "0.80"
+
+/*
+ * GRU statistics.
+ */
+struct gru_stats_s {
+ atomic_long_t vdata_alloc;
+ atomic_long_t vdata_free;
+ atomic_long_t gts_alloc;
+ atomic_long_t gts_free;
+ atomic_long_t vdata_double_alloc;
+ atomic_long_t gts_double_allocate;
+ atomic_long_t assign_context;
+ atomic_long_t assign_context_failed;
+ atomic_long_t free_context;
+ atomic_long_t load_context;
+ atomic_long_t unload_context;
+ atomic_long_t steal_context;
+ atomic_long_t steal_context_failed;
+ atomic_long_t nopfn;
+ atomic_long_t break_cow;
+ atomic_long_t asid_new;
+ atomic_long_t asid_next;
+ atomic_long_t asid_wrap;
+ atomic_long_t asid_reuse;
+ atomic_long_t intr;
+ atomic_long_t call_os;
+ atomic_long_t call_os_check_for_bug;
+ atomic_long_t call_os_wait_queue;
+ atomic_long_t user_flush_tlb;
+ atomic_long_t user_unload_context;
+ atomic_long_t user_exception;
+ atomic_long_t set_task_slice;
+ atomic_long_t migrate_check;
+ atomic_long_t migrated_retarget;
+ atomic_long_t migrated_unload;
+ atomic_long_t migrated_unload_delay;
+ atomic_long_t migrated_nopfn_retarget;
+ atomic_long_t migrated_nopfn_unload;
+ atomic_long_t tlb_dropin;
+ atomic_long_t tlb_dropin_fail_no_asid;
+ atomic_long_t tlb_dropin_fail_upm;
+ atomic_long_t tlb_dropin_fail_invalid;
+ atomic_long_t tlb_dropin_fail_range_active;
+ atomic_long_t tlb_dropin_fail_idle;
+ atomic_long_t tlb_dropin_fail_fmm;
+ atomic_long_t mmu_invalidate_range;
+ atomic_long_t mmu_invalidate_page;
+ atomic_long_t mmu_clear_flush_young;
+ atomic_long_t flush_tlb;
+ atomic_long_t flush_tlb_gru;
+ atomic_long_t flush_tlb_gru_tgh;
+ atomic_long_t flush_tlb_gru_zero_asid;
+
+ atomic_long_t copy_gpa;
+
+ atomic_long_t mesq_receive;
+ atomic_long_t mesq_receive_none;
+ atomic_long_t mesq_send;
+ atomic_long_t mesq_send_failed;
+ atomic_long_t mesq_noop;
+ atomic_long_t mesq_send_unexpected_error;
+ atomic_long_t mesq_send_lb_overflow;
+ atomic_long_t mesq_send_qlimit_reached;
+ atomic_long_t mesq_send_amo_nacked;
+ atomic_long_t mesq_send_put_nacked;
+ atomic_long_t mesq_qf_not_full;
+ atomic_long_t mesq_qf_locked;
+ atomic_long_t mesq_qf_noop_not_full;
+ atomic_long_t mesq_qf_switch_head_failed;
+ atomic_long_t mesq_qf_unexpected_error;
+ atomic_long_t mesq_noop_unexpected_error;
+ atomic_long_t mesq_noop_lb_overflow;
+ atomic_long_t mesq_noop_qlimit_reached;
+ atomic_long_t mesq_noop_amo_nacked;
+ atomic_long_t mesq_noop_put_nacked;
+
+};
+
+#define OPT_DPRINT 1
+#define OPT_STATS 2
+#define GRU_QUICKLOOK 4
+
+
+#define IRQ_GRU 110 /* Starting IRQ number for interrupts */
+
+/* Delay in jiffies between attempts to assign a GRU context */
+#define GRU_ASSIGN_DELAY ((HZ * 20) / 1000)
+
+/*
+ * If a process has it's context stolen, min delay in jiffies before trying to
+ * steal a context from another process.
+ */
+#define GRU_STEAL_DELAY ((HZ * 200) / 1000)
+
+#define STAT(id) do { \
+ if (gru_options & OPT_STATS) \
+ atomic_long_inc(&gru_stats.id); \
+ } while (0)
+
+#ifdef CONFIG_SGI_GRU_DEBUG
+#define gru_dbg(dev, fmt, x...) \
+ do { \
+ if (gru_options & OPT_DPRINT) \
+ dev_dbg(dev, "%s: " fmt, __func__, x); \
+ } while (0)
+#else
+#define gru_dbg(x...)
+#endif
+
+/*-----------------------------------------------------------------------------
+ * ASID management
+ */
+#define MAX_ASID 0xfffff0
+#define MIN_ASID 8
+#define ASID_INC 8 /* number of regions */
+
+/* Generate a GRU asid value from a GRU base asid & a virtual address. */
+#if defined CONFIG_IA64
+#define VADDR_HI_BIT 64
+#define GRUREGION(addr) ((addr) >> (VADDR_HI_BIT - 3) & 3)
+#elif defined __x86_64
+#define VADDR_HI_BIT 48
+#define GRUREGION(addr) (0) /* ZZZ could do better */
+#else
+#error "Unsupported architecture"
+#endif
+#define GRUASID(asid, addr) ((asid) + GRUREGION(addr))
+
+/*------------------------------------------------------------------------------
+ * File & VMS Tables
+ */
+
+struct gru_state;
+
+/*
+ * This structure is pointed to from the mmstruct via the notifier pointer.
+ * There is one of these per address space.
+ */
+struct gru_mm_tracker {
+ unsigned int mt_asid_gen; /* ASID wrap count */
+ int mt_asid; /* current base ASID for gru */
+ unsigned short mt_ctxbitmap; /* bitmap of contexts using
+ asid */
+};
+
+struct gru_mm_struct {
+ struct mmu_notifier ms_notifier;
+ atomic_t ms_refcnt;
+ spinlock_t ms_asid_lock; /* protects ASID assignment */
+ atomic_t ms_range_active;/* num range_invals active */
+ char ms_released;
+ wait_queue_head_t ms_wait_queue;
+ DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS);
+ struct gru_mm_tracker ms_asids[GRU_MAX_GRUS];
+};
+
+/*
+ * One of these structures is allocated when a GSEG is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ */
+struct gru_vma_data {
+ spinlock_t vd_lock; /* Serialize access to vma */
+ struct list_head vd_head; /* head of linked list of gts */
+ long vd_user_options;/* misc user option flags */
+ int vd_cbr_au_count;
+ int vd_dsr_au_count;
+};
+
+/*
+ * One of these is allocated for each thread accessing a mmaped GRU. A linked
+ * list of these structure is hung off the struct gru_vma_data in the mm_struct.
+ */
+struct gru_thread_state {
+ struct list_head ts_next; /* list - head at vma-private */
+ struct mutex ts_ctxlock; /* load/unload CTX lock */
+ struct mm_struct *ts_mm; /* mm currently mapped to
+ context */
+ struct vm_area_struct *ts_vma; /* vma of GRU context */
+ struct gru_state *ts_gru; /* GRU where the context is
+ loaded */
+ struct gru_mm_struct *ts_gms; /* asid & ioproc struct */
+ unsigned long ts_cbr_map; /* map of allocated CBRs */
+ unsigned long ts_dsr_map; /* map of allocated DATA
+ resources */
+ unsigned long ts_steal_jiffies;/* jiffies when context last
+ stolen */
+ long ts_user_options;/* misc user option flags */
+ pid_t ts_tgid_owner; /* task that is using the
+ context - for migration */
+ int ts_tsid; /* thread that owns the
+ structure */
+ int ts_tlb_int_select;/* target cpu if interrupts
+ enabled */
+ int ts_ctxnum; /* context number where the
+ context is loaded */
+ atomic_t ts_refcnt; /* reference count GTS */
+ unsigned char ts_dsr_au_count;/* Number of DSR resources
+ required for contest */
+ unsigned char ts_cbr_au_count;/* Number of CBR resources
+ required for contest */
+ char ts_force_unload;/* force context to be unloaded
+ after migration */
+ char ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
+ allocated CB */
+ unsigned long ts_gdata[0]; /* save area for GRU data (CB,
+ DS, CBE) */
+};
+
+/*
+ * Threaded programs actually allocate an array of GSEGs when a context is
+ * created. Each thread uses a separate GSEG. TSID is the index into the GSEG
+ * array.
+ */
+#define TSID(a, v) (((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE)
+#define UGRUADDR(gts) ((gts)->ts_vma->vm_start + \
+ (gts)->ts_tsid * GRU_GSEG_PAGESIZE)
+
+#define NULLCTX (-1) /* if context not loaded into GRU */
+
+/*-----------------------------------------------------------------------------
+ * GRU State Tables
+ */
+
+/*
+ * One of these exists for each GRU chiplet.
+ */
+struct gru_state {
+ struct gru_blade_state *gs_blade; /* GRU state for entire
+ blade */
+ unsigned long gs_gru_base_paddr; /* Physical address of
+ gru segments (64) */
+ void *gs_gru_base_vaddr; /* Virtual address of
+ gru segments (64) */
+ unsigned char gs_gid; /* unique GRU number */
+ unsigned char gs_tgh_local_shift; /* used to pick TGH for
+ local flush */
+ unsigned char gs_tgh_first_remote; /* starting TGH# for
+ remote flush */
+ unsigned short gs_blade_id; /* blade of GRU */
+ spinlock_t gs_asid_lock; /* lock used for
+ assigning asids */
+ spinlock_t gs_lock; /* lock used for
+ assigning contexts */
+
+ /* -- the following are protected by the gs_asid_lock spinlock ---- */
+ unsigned int gs_asid; /* Next availe ASID */
+ unsigned int gs_asid_limit; /* Limit of available
+ ASIDs */
+ unsigned int gs_asid_gen; /* asid generation.
+ Inc on wrap */
+
+ /* --- the following fields are protected by the gs_lock spinlock --- */
+ unsigned long gs_context_map; /* bitmap to manage
+ contexts in use */
+ unsigned long gs_cbr_map; /* bitmap to manage CB
+ resources */
+ unsigned long gs_dsr_map; /* bitmap used to manage
+ DATA resources */
+ unsigned int gs_reserved_cbrs; /* Number of kernel-
+ reserved cbrs */
+ unsigned int gs_reserved_dsr_bytes; /* Bytes of kernel-
+ reserved dsrs */
+ unsigned short gs_active_contexts; /* number of contexts
+ in use */
+ struct gru_thread_state *gs_gts[GRU_NUM_CCH]; /* GTS currently using
+ the context */
+};
+
+/*
+ * This structure contains the GRU state for all the GRUs on a blade.
+ */
+struct gru_blade_state {
+ void *kernel_cb; /* First kernel
+ reserved cb */
+ void *kernel_dsr; /* First kernel
+ reserved DSR */
+ /* ---- the following are protected by the bs_lock spinlock ---- */
+ spinlock_t bs_lock; /* lock used for
+ stealing contexts */
+ int bs_lru_ctxnum; /* STEAL - last context
+ stolen */
+ struct gru_state *bs_lru_gru; /* STEAL - last gru
+ stolen */
+
+ struct gru_state bs_grus[GRU_CHIPLETS_PER_BLADE];
+};
+
+/*-----------------------------------------------------------------------------
+ * Address Primitives
+ */
+#define get_tfm_for_cpu(g, c) \
+ ((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c)))
+#define get_tfh_by_index(g, i) \
+ ((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i)))
+#define get_tgh_by_index(g, i) \
+ ((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i)))
+#define get_cbe_by_index(g, i) \
+ ((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\
+ (i)))
+
+/*-----------------------------------------------------------------------------
+ * Useful Macros
+ */
+
+/* Given a blade# & chiplet#, get a pointer to the GRU */
+#define get_gru(b, c) (&gru_base[b]->bs_grus[c])
+
+/* Number of bytes to save/restore when unloading/loading GRU contexts */
+#define DSR_BYTES(dsr) ((dsr) * GRU_DSR_AU_BYTES)
+#define CBR_BYTES(cbr) ((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2)
+
+/* Convert a user CB number to the actual CBRNUM */
+#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \
+ * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE)
+
+/* Convert a gid to a pointer to the GRU */
+#define GID_TO_GRU(gid) \
+ (gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ? \
+ (&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]-> \
+ bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) : \
+ NULL)
+
+/* Scan all active GRUs in a GRU bitmap */
+#define for_each_gru_in_bitmap(gid, map) \
+ for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
+ (gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+
+/* Scan all active GRUs on a specific blade */
+#define for_each_gru_on_blade(gru, nid, i) \
+ for ((gru) = gru_base[nid]->bs_grus, (i) = 0; \
+ (i) < GRU_CHIPLETS_PER_BLADE; \
+ (i)++, (gru)++)
+
+/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */
+#define for_each_gts_on_gru(gts, gru, ctxnum) \
+ for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++) \
+ if (((gts) = (gru)->gs_gts[ctxnum]))
+
+/* Scan each CBR whose bit is set in a TFM (or copy of) */
+#define for_each_cbr_in_tfm(i, map) \
+ for ((i) = find_first_bit(map, GRU_NUM_CBE); \
+ (i) < GRU_NUM_CBE; \
+ (i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+
+/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
+#define for_each_cbr_in_allocation_map(i, map, k) \
+ for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU; \
+ (k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) \
+ for ((i) = (k)*GRU_CBR_AU_SIZE; \
+ (i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
+
+/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
+#define for_each_dsr_in_allocation_map(i, map, k) \
+ for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
+ (k) < GRU_DSR_AU; \
+ (k) = find_next_bit((const unsigned long *)map, \
+ GRU_DSR_AU, (k) + 1)) \
+ for ((i) = (k) * GRU_DSR_AU_CL; \
+ (i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
+
+#define gseg_physical_address(gru, ctxnum) \
+ ((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE)
+#define gseg_virtual_address(gru, ctxnum) \
+ ((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE)
+
+/*-----------------------------------------------------------------------------
+ * Lock / Unlock GRU handles
+ * Use the "delresp" bit in the handle as a "lock" bit.
+ */
+
+/* Lock hierarchy checking enabled only in emulator */
+
+static inline void __lock_handle(void *h)
+{
+ while (test_and_set_bit(1, h))
+ cpu_relax();
+}
+
+static inline void __unlock_handle(void *h)
+{
+ clear_bit(1, h);
+}
+
+static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+ __lock_handle(cch);
+}
+
+static inline void unlock_cch_handle(struct gru_context_configuration_handle
+ *cch)
+{
+ __unlock_handle(cch);
+}
+
+static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+ __lock_handle(tgh);
+}
+
+static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+ __unlock_handle(tgh);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function prototypes & externs
+ */
+struct gru_unload_context_req;
+
+extern struct vm_operations_struct gru_vm_ops;
+extern struct device *grudev;
+
+extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
+ int tsid);
+extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
+ *vma, int tsid);
+extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
+ *vma, int tsid);
+extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
+extern void gts_drop(struct gru_thread_state *gts);
+extern void gru_tgh_flush_init(struct gru_state *gru);
+extern int gru_kservices_init(struct gru_state *gru);
+extern irqreturn_t gru_intr(int irq, void *dev_id);
+extern int gru_handle_user_call_os(unsigned long address);
+extern int gru_user_flush_tlb(unsigned long arg);
+extern int gru_user_unload_context(unsigned long arg);
+extern int gru_get_exception_detail(unsigned long arg);
+extern int gru_set_task_slice(long address);
+extern int gru_cpu_fault_map_id(void);
+extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
+extern void gru_flush_all_tlb(struct gru_state *gru);
+extern int gru_proc_init(void);
+extern void gru_proc_exit(void);
+
+extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
+ int cbr_au_count, char *cbmap);
+extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
+ int dsr_au_count, char *dsmap);
+extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
+extern struct gru_mm_struct *gru_register_mmu_notifier(void);
+extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
+
+extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+ unsigned long len);
+
+extern unsigned long gru_options;
+
+#endif /* __GRUTABLES_H__ */
diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c
new file mode 100644
index 0000000..bcfd542
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutlbpurge.c
@@ -0,0 +1,372 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * MMUOPS callbacks + TLB flushing
+ *
+ * This file handles emu notifier callbacks from the core kernel. The callbacks
+ * are used to update the TLB in the GRU as a result of changes in the
+ * state of a process address space. This file also handles TLB invalidates
+ * from the GRU driver.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/hugetlb.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/srcu.h>
+#include <asm/processor.h>
+#include "gru.h"
+#include "grutables.h"
+#include <asm/uv/uv_hub.h>
+
+#define gru_random() get_cycles()
+
+/* ---------------------------------- TLB Invalidation functions --------
+ * get_tgh_handle
+ *
+ * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the
+ * local blade, use a fixed TGH that is a function of the blade-local cpu
+ * number. Normally, this TGH is private to the cpu & no contention occurs for
+ * the TGH. For offblade GRUs, select a random TGH in the range above the
+ * private TGHs. A spinlock is required to access this TGH & the lock must be
+ * released when the invalidate is completes. This sucks, but it is the best we
+ * can do.
+ *
+ * Note that the spinlock is IN the TGH handle so locking does not involve
+ * additional cache lines.
+ *
+ */
+static inline int get_off_blade_tgh(struct gru_state *gru)
+{
+ int n;
+
+ n = GRU_NUM_TGH - gru->gs_tgh_first_remote;
+ n = gru_random() % n;
+ n += gru->gs_tgh_first_remote;
+ return n;
+}
+
+static inline int get_on_blade_tgh(struct gru_state *gru)
+{
+ return uv_blade_processor_id() >> gru->gs_tgh_local_shift;
+}
+
+static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
+ *gru)
+{
+ struct gru_tlb_global_handle *tgh;
+ int n;
+
+ preempt_disable();
+ if (uv_numa_blade_id() == gru->gs_blade_id)
+ n = get_on_blade_tgh(gru);
+ else
+ n = get_off_blade_tgh(gru);
+ tgh = get_tgh_by_index(gru, n);
+ lock_tgh_handle(tgh);
+
+ return tgh;
+}
+
+static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+ unlock_tgh_handle(tgh);
+ preempt_enable();
+}
+
+/*
+ * gru_flush_tlb_range
+ *
+ * General purpose TLB invalidation function. This function scans every GRU in
+ * the ENTIRE system (partition) looking for GRUs where the specified MM has
+ * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR
+ * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned
+ * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the
+ * cost of (possibly) a large number of future TLBmisses.
+ *
+ * The current algorithm is optimized based on the following (somewhat true)
+ * assumptions:
+ * - GRU contexts are not loaded into a GRU unless a reference is made to
+ * the data segment or control block (this is true, not an assumption).
+ * If a DS/CB is referenced, the user will also issue instructions that
+ * cause TLBmisses. It is not necessary to optimize for the case where
+ * contexts are loaded but no instructions cause TLB misses. (I know
+ * this will happen but I'm not optimizing for it).
+ * - GRU instructions to invalidate TLB entries are SLOOOOWWW - normally
+ * a few usec but in unusual cases, it could be longer. Avoid if
+ * possible.
+ * - intrablade process migration between cpus is not frequent but is
+ * common.
+ * - a GRU context is not typically migrated to a different GRU on the
+ * blade because of intrablade migration
+ * - interblade migration is rare. Processes migrate their GRU context to
+ * the new blade.
+ * - if interblade migration occurs, migration back to the original blade
+ * is very very rare (ie., no optimization for this case)
+ * - most GRU instruction operate on a subset of the user REGIONS. Code
+ * & shared library regions are not likely targets of GRU instructions.
+ *
+ * To help improve the efficiency of TLB invalidation, the GMS data
+ * structure is maintained for EACH address space (MM struct). The GMS is
+ * also the structure that contains the pointer to the mmu callout
+ * functions. This structure is linked to the mm_struct for the address space
+ * using the mmu "register" function. The mmu interfaces are used to
+ * provide the callbacks for TLB invalidation. The GMS contains:
+ *
+ * - asid[maxgrus] array. ASIDs are assigned to a GRU when a context is
+ * loaded into the GRU.
+ * - asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in
+ * the above array
+ * - ctxbitmap[maxgrus]. Indicates the contexts that are currently active
+ * in the GRU for the address space. This bitmap must be passed to the
+ * GRU to do an invalidate.
+ *
+ * The current algorithm for invalidating TLBs is:
+ * - scan the asidmap for GRUs where the context has been loaded, ie,
+ * asid is non-zero.
+ * - for each gru found:
+ * - if the ctxtmap is non-zero, there are active contexts in the
+ * GRU. TLB invalidate instructions must be issued to the GRU.
+ * - if the ctxtmap is zero, no context is active. Set the ASID to
+ * zero to force a full TLB invalidation. This is fast but will
+ * cause a lot of TLB misses if the context is reloaded onto the
+ * GRU
+ *
+ */
+
+void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+ unsigned long len)
+{
+ struct gru_state *gru;
+ struct gru_mm_tracker *asids;
+ struct gru_tlb_global_handle *tgh;
+ unsigned long num;
+ int grupagesize, pagesize, pageshift, gid, asid;
+
+ /* ZZZ TODO - handle huge pages */
+ pageshift = PAGE_SHIFT;
+ pagesize = (1UL << pageshift);
+ grupagesize = GRU_PAGESIZE(pageshift);
+ num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL);
+
+ STAT(flush_tlb);
+ gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms,
+ start, len, gms->ms_asidmap[0]);
+
+ spin_lock(&gms->ms_asid_lock);
+ for_each_gru_in_bitmap(gid, gms->ms_asidmap) {
+ STAT(flush_tlb_gru);
+ gru = GID_TO_GRU(gid);
+ asids = gms->ms_asids + gid;
+ asid = asids->mt_asid;
+ if (asids->mt_ctxbitmap && asid) {
+ STAT(flush_tlb_gru_tgh);
+ asid = GRUASID(asid, start);
+ gru_dbg(grudev,
+ " FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n",
+ gid, asid, num, asids->mt_ctxbitmap);
+ tgh = get_lock_tgh_handle(gru);
+ tgh_invalidate(tgh, start, 0, asid, grupagesize, 0,
+ num - 1, asids->mt_ctxbitmap);
+ get_unlock_tgh_handle(tgh);
+ } else {
+ STAT(flush_tlb_gru_zero_asid);
+ asids->mt_asid = 0;
+ __clear_bit(gru->gs_gid, gms->ms_asidmap);
+ gru_dbg(grudev,
+ " CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n",
+ gid, asid, asids->mt_ctxbitmap,
+ gms->ms_asidmap[0]);
+ }
+ }
+ spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Flush the entire TLB on a chiplet.
+ */
+void gru_flush_all_tlb(struct gru_state *gru)
+{
+ struct gru_tlb_global_handle *tgh;
+
+ gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid);
+ tgh = get_lock_tgh_handle(gru);
+ tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0);
+ get_unlock_tgh_handle(tgh);
+ preempt_enable();
+}
+
+/*
+ * MMUOPS notifier callout functions
+ */
+static void gru_invalidate_range_start(struct mmu_notifier *mn,
+ struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+ ms_notifier);
+
+ STAT(mmu_invalidate_range);
+ atomic_inc(&gms->ms_range_active);
+ gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms,
+ start, end, atomic_read(&gms->ms_range_active));
+ gru_flush_tlb_range(gms, start, end - start);
+}
+
+static void gru_invalidate_range_end(struct mmu_notifier *mn,
+ struct mm_struct *mm, unsigned long start,
+ unsigned long end)
+{
+ struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+ ms_notifier);
+
+ /* ..._and_test() provides needed barrier */
+ (void)atomic_dec_and_test(&gms->ms_range_active);
+
+ wake_up_all(&gms->ms_wait_queue);
+ gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end);
+}
+
+static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
+ unsigned long address)
+{
+ struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+ ms_notifier);
+
+ STAT(mmu_invalidate_page);
+ gru_flush_tlb_range(gms, address, PAGE_SIZE);
+ gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address);
+}
+
+static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+ struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+ ms_notifier);
+
+ gms->ms_released = 1;
+ gru_dbg(grudev, "gms %p\n", gms);
+}
+
+
+static const struct mmu_notifier_ops gru_mmuops = {
+ .invalidate_page = gru_invalidate_page,
+ .invalidate_range_start = gru_invalidate_range_start,
+ .invalidate_range_end = gru_invalidate_range_end,
+ .release = gru_release,
+};
+
+/* Move this to the basic mmu_notifier file. But for now... */
+static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm,
+ const struct mmu_notifier_ops *ops)
+{
+ struct mmu_notifier *mn, *gru_mn = NULL;
+ struct hlist_node *n;
+
+ if (mm->mmu_notifier_mm) {
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list,
+ hlist)
+ if (mn->ops == ops) {
+ gru_mn = mn;
+ break;
+ }
+ rcu_read_unlock();
+ }
+ return gru_mn;
+}
+
+struct gru_mm_struct *gru_register_mmu_notifier(void)
+{
+ struct gru_mm_struct *gms;
+ struct mmu_notifier *mn;
+
+ mn = mmu_find_ops(current->mm, &gru_mmuops);
+ if (mn) {
+ gms = container_of(mn, struct gru_mm_struct, ms_notifier);
+ atomic_inc(&gms->ms_refcnt);
+ } else {
+ gms = kzalloc(sizeof(*gms), GFP_KERNEL);
+ if (gms) {
+ spin_lock_init(&gms->ms_asid_lock);
+ gms->ms_notifier.ops = &gru_mmuops;
+ atomic_set(&gms->ms_refcnt, 1);
+ init_waitqueue_head(&gms->ms_wait_queue);
+ __mmu_notifier_register(&gms->ms_notifier, current->mm);
+ }
+ }
+ gru_dbg(grudev, "gms %p, refcnt %d\n", gms,
+ atomic_read(&gms->ms_refcnt));
+ return gms;
+}
+
+void gru_drop_mmu_notifier(struct gru_mm_struct *gms)
+{
+ gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms,
+ atomic_read(&gms->ms_refcnt), gms->ms_released);
+ if (atomic_dec_return(&gms->ms_refcnt) == 0) {
+ if (!gms->ms_released)
+ mmu_notifier_unregister(&gms->ms_notifier, current->mm);
+ kfree(gms);
+ }
+}
+
+/*
+ * Setup TGH parameters. There are:
+ * - 24 TGH handles per GRU chiplet
+ * - a portion (MAX_LOCAL_TGH) of the handles are reserved for
+ * use by blade-local cpus
+ * - the rest are used by off-blade cpus. This usage is
+ * less frequent than blade-local usage.
+ *
+ * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade
+ * has less tan or equal to 16 cpus, each cpu has a unique handle that it can
+ * use.
+ */
+#define MAX_LOCAL_TGH 16
+
+void gru_tgh_flush_init(struct gru_state *gru)
+{
+ int cpus, shift = 0, n;
+
+ cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+ /* n = cpus rounded up to next power of 2 */
+ if (cpus) {
+ n = 1 << fls(cpus - 1);
+
+ /*
+ * shift count for converting local cpu# to TGH index
+ * 0 if cpus <= MAX_LOCAL_TGH,
+ * 1 if cpus <= 2*MAX_LOCAL_TGH,
+ * etc
+ */
+ shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1));
+ }
+ gru->gs_tgh_local_shift = shift;
+
+ /* first starting TGH index to use for remote purges */
+ gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift;
+
+}
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index b6e40a7..35ce285 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -3,9 +3,17 @@
#
obj-$(CONFIG_SGI_XP) += xp.o
-xp-y := xp_main.o xp_nofault.o
+xp-y := xp_main.o
+xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o
+xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o
+xp-$(CONFIG_X86_64) += xp_uv.o
obj-$(CONFIG_SGI_XP) += xpc.o
xpc-y := xpc_main.o xpc_channel.o xpc_partition.o
+xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o
+xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o
+xpc-$(CONFIG_X86_64) += xpc_uv.o
obj-$(CONFIG_SGI_XP) += xpnet.o
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 03a87a3..859a528 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -13,11 +13,34 @@
#ifndef _DRIVERS_MISC_SGIXP_XP_H
#define _DRIVERS_MISC_SGIXP_XP_H
-#include <linux/cache.h>
-#include <linux/hardirq.h>
#include <linux/mutex.h>
-#include <asm/sn/types.h>
-#include <asm/sn/bte.h>
+
+#ifdef CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */
+#define is_shub() ia64_platform_is("sn2")
+#define is_uv() ia64_platform_is("uv")
+#endif
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define is_uv() is_uv_system()
+#endif
+
+#ifndef is_shub1
+#define is_shub1() 0
+#endif
+
+#ifndef is_shub2
+#define is_shub2() 0
+#endif
+
+#ifndef is_shub
+#define is_shub() 0
+#endif
+
+#ifndef is_uv
+#define is_uv() 0
+#endif
#ifdef USE_DBUG_ON
#define DBUG_ON(condition) BUG_ON(condition)
@@ -26,133 +49,56 @@
#endif
/*
- * Define the maximum number of logically defined partitions the system
- * can support. It is constrained by the maximum number of hardware
- * partitionable regions. The term 'region' in this context refers to the
- * minimum number of nodes that can comprise an access protection grouping.
- * The access protection is in regards to memory, IPI and IOI.
+ * Define the maximum number of partitions the system can possibly support.
+ * It is based on the maximum number of hardware partitionable regions. The
+ * term 'region' in this context refers to the minimum number of nodes that
+ * can comprise an access protection grouping. The access protection is in
+ * regards to memory, IPI and IOI.
*
* The maximum number of hardware partitionable regions is equal to the
* maximum number of nodes in the entire system divided by the minimum number
* of nodes that comprise an access protection grouping.
*/
-#define XP_MAX_PARTITIONS 64
-
-/*
- * Define the number of u64s required to represent all the C-brick nasids
- * as a bitmap. The cross-partition kernel modules deal only with
- * C-brick nasids, thus the need for bitmaps which don't account for
- * odd-numbered (non C-brick) nasids.
- */
-#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2)
-#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8)
-#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64)
-
-/*
- * Wrapper for bte_copy() that should it return a failure status will retry
- * the bte_copy() once in the hope that the failure was due to a temporary
- * aberration (i.e., the link going down temporarily).
- *
- * src - physical address of the source of the transfer.
- * vdst - virtual address of the destination of the transfer.
- * len - number of bytes to transfer from source to destination.
- * mode - see bte_copy() for definition.
- * notification - see bte_copy() for definition.
- *
- * Note: xp_bte_copy() should never be called while holding a spinlock.
- */
-static inline bte_result_t
-xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
-{
- bte_result_t ret;
- u64 pdst = ia64_tpa(vdst);
-
- /*
- * Ensure that the physically mapped memory is contiguous.
- *
- * We do this by ensuring that the memory is from region 7 only.
- * If the need should arise to use memory from one of the other
- * regions, then modify the BUG_ON() statement to ensure that the
- * memory from that region is always physically contiguous.
- */
- BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
-
- ret = bte_copy(src, pdst, len, mode, notification);
- if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
- if (!in_interrupt())
- cond_resched();
-
- ret = bte_copy(src, pdst, len, mode, notification);
- }
-
- return ret;
-}
+#define XP_MAX_NPARTITIONS_SN2 64
+#define XP_MAX_NPARTITIONS_UV 256
/*
* XPC establishes channel connections between the local partition and any
* other partition that is currently up. Over these channels, kernel-level
* `users' can communicate with their counterparts on the other partitions.
*
- * The maxinum number of channels is limited to eight. For performance reasons,
- * the internal cross partition structures require sixteen bytes per channel,
- * and eight allows all of this interface-shared info to fit in one cache line.
- *
- * XPC_NCHANNELS reflects the total number of channels currently defined.
* If the need for additional channels arises, one can simply increase
- * XPC_NCHANNELS accordingly. If the day should come where that number
- * exceeds the MAXIMUM number of channels allowed (eight), then one will need
- * to make changes to the XPC code to allow for this.
+ * XPC_MAX_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the absolute MAXIMUM number of channels possible (eight), then one
+ * will need to make changes to the XPC code to accommodate for this.
+ *
+ * The absolute maximum number of channels possible is limited to eight for
+ * performance reasons on sn2 hardware. The internal cross partition structures
+ * require sixteen bytes per channel, and eight allows all of this
+ * interface-shared info to fit in one 128-byte cacheline.
*/
#define XPC_MEM_CHANNEL 0 /* memory channel number */
#define XPC_NET_CHANNEL 1 /* network channel number */
-#define XPC_NCHANNELS 2 /* #of defined channels */
-#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */
+#define XPC_MAX_NCHANNELS 2 /* max #of channels allowed */
-#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
-#error XPC_NCHANNELS exceeds MAXIMUM allowed.
+#if XPC_MAX_NCHANNELS > 8
+#error XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
#endif
/*
- * The format of an XPC message is as follows:
- *
- * +-------+--------------------------------+
- * | flags |////////////////////////////////|
- * +-------+--------------------------------+
- * | message # |
- * +----------------------------------------+
- * | payload (user-defined message) |
- * | |
- * :
- * | |
- * +----------------------------------------+
- *
- * The size of the payload is defined by the user via xpc_connect(). A user-
- * defined message resides in the payload area.
- *
- * The user should have no dealings with the message header, but only the
- * message's payload. When a message entry is allocated (via xpc_allocate())
- * a pointer to the payload area is returned and not the actual beginning of
- * the XPC message. The user then constructs a message in the payload area
- * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
- *
- * The size of a message entry (within a message queue) must be a cacheline
- * sized multiple in order to facilitate the BTE transfer of messages from one
- * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * Define macro, XPC_MSG_SIZE(), is provided for the user
* that wants to fit as many msg entries as possible in a given memory size
* (e.g. a memory page).
*/
-struct xpc_msg {
- u8 flags; /* FOR XPC INTERNAL USE ONLY */
- u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */
- s64 number; /* FOR XPC INTERNAL USE ONLY */
+#define XPC_MSG_MAX_SIZE 128
+#define XPC_MSG_HDR_MAX_SIZE 16
+#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
- u64 payload; /* user defined portion of message */
-};
-
-#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload)
#define XPC_MSG_SIZE(_payload_size) \
- L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+ ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
+ is_uv() ? 64 : 128)
+
/*
* Define the return values and values passed to user's callout functions.
@@ -233,8 +179,20 @@
xpDisconnected, /* 51: channel disconnected (closed) */
xpBteCopyError, /* 52: bte_copy() returned error */
+ xpSalError, /* 53: sn SAL error */
+ xpRsvdPageNotSet, /* 54: the reserved page is not set up */
+ xpPayloadTooBig, /* 55: payload too large for message slot */
- xpUnknownReason /* 53: unknown reason - must be last in enum */
+ xpUnsupported, /* 56: unsupported functionality or resource */
+ xpNeedMoreInfo, /* 57: more info is needed by SAL */
+
+ xpGruCopyError, /* 58: gru_copy_gru() returned error */
+ xpGruSendMqError, /* 59: gru send message queue related error */
+
+ xpBadChannelNumber, /* 60: invalid channel number */
+ xpBadMsgType, /* 60: invalid message type */
+
+ xpUnknownReason /* 61: unknown reason - must be last in enum */
};
/*
@@ -285,6 +243,9 @@
* calling xpc_received().
*
* All other reason codes indicate failure.
+ *
+ * NOTE: The user defined function must be callable by an interrupt handler
+ * and thus cannot block.
*/
typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
int ch_number, void *key);
@@ -308,23 +269,22 @@
xpc_channel_func func; /* function to call */
void *key; /* pointer to user's key */
u16 nentries; /* #of msg entries in local msg queue */
- u16 msg_size; /* message queue's message size */
+ u16 entry_size; /* message queue's message entry size */
u32 assigned_limit; /* limit on #of assigned kthreads */
u32 idle_limit; /* limit on #of idle kthreads */
} ____cacheline_aligned;
#define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL)
-/* the following are valid xpc_allocate() flags */
+/* the following are valid xpc_send() or xpc_send_notify() flags */
#define XPC_WAIT 0 /* wait flag */
#define XPC_NOWAIT 1 /* no wait flag */
struct xpc_interface {
void (*connect) (int);
void (*disconnect) (int);
- enum xp_retval (*allocate) (short, int, u32, void **);
- enum xp_retval (*send) (short, int, void *);
- enum xp_retval (*send_notify) (short, int, void *,
+ enum xp_retval (*send) (short, int, u32, void *, u16);
+ enum xp_retval (*send_notify) (short, int, u32, void *, u16,
xpc_notify_func, void *);
void (*received) (short, int, void *);
enum xp_retval (*partid_to_nasids) (short, void *);
@@ -334,10 +294,9 @@
extern void xpc_set_interface(void (*)(int),
void (*)(int),
- enum xp_retval (*)(short, int, u32, void **),
- enum xp_retval (*)(short, int, void *),
- enum xp_retval (*)(short, int, void *,
- xpc_notify_func, void *),
+ enum xp_retval (*)(short, int, u32, void *, u16),
+ enum xp_retval (*)(short, int, u32, void *, u16,
+ xpc_notify_func, void *),
void (*)(short, int, void *),
enum xp_retval (*)(short, void *));
extern void xpc_clear_interface(void);
@@ -347,22 +306,19 @@
extern void xpc_disconnect(int);
static inline enum xp_retval
-xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
+xpc_send(short partid, int ch_number, u32 flags, void *payload,
+ u16 payload_size)
{
- return xpc_interface.allocate(partid, ch_number, flags, payload);
+ return xpc_interface.send(partid, ch_number, flags, payload,
+ payload_size);
}
static inline enum xp_retval
-xpc_send(short partid, int ch_number, void *payload)
+xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
+ u16 payload_size, xpc_notify_func func, void *key)
{
- return xpc_interface.send(partid, ch_number, payload);
-}
-
-static inline enum xp_retval
-xpc_send_notify(short partid, int ch_number, void *payload,
- xpc_notify_func func, void *key)
-{
- return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+ return xpc_interface.send_notify(partid, ch_number, flags, payload,
+ payload_size, func, key);
}
static inline void
@@ -377,8 +333,23 @@
return xpc_interface.partid_to_nasids(partid, nasids);
}
+extern short xp_max_npartitions;
+extern short xp_partition_id;
+extern u8 xp_region_size;
+
+extern unsigned long (*xp_pa) (void *);
+extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
+ size_t);
+extern int (*xp_cpu_to_nasid) (int);
+
extern u64 xp_nofault_PIOR_target;
extern int xp_nofault_PIOR(void *);
extern int xp_error_PIOR(void);
+extern struct device *xp;
+extern enum xp_retval xp_init_sn2(void);
+extern enum xp_retval xp_init_uv(void);
+extern void xp_exit_sn2(void);
+extern void xp_exit_uv(void);
+
#endif /* _DRIVERS_MISC_SGIXP_XP_H */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 196480b..66a1d19 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -14,29 +14,48 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
#include "xp.h"
-/*
- * The export of xp_nofault_PIOR needs to happen here since it is defined
- * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
- * defined here.
- */
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+/* define the XP debug device structures to be used with dev_dbg() et al */
-u64 xp_nofault_PIOR_target;
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+struct device_driver xp_dbg_name = {
+ .name = "xp"
+};
+
+struct device xp_dbg_subname = {
+ .bus_id = {0}, /* set to "" */
+ .driver = &xp_dbg_name
+};
+
+struct device *xp = &xp_dbg_subname;
+
+/* max #of partitions possible */
+short xp_max_npartitions;
+EXPORT_SYMBOL_GPL(xp_max_npartitions);
+
+short xp_partition_id;
+EXPORT_SYMBOL_GPL(xp_partition_id);
+
+u8 xp_region_size;
+EXPORT_SYMBOL_GPL(xp_region_size);
+
+unsigned long (*xp_pa) (void *addr);
+EXPORT_SYMBOL_GPL(xp_pa);
+
+enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa,
+ const unsigned long src_gpa, size_t len);
+EXPORT_SYMBOL_GPL(xp_remote_memcpy);
+
+int (*xp_cpu_to_nasid) (int cpuid);
+EXPORT_SYMBOL_GPL(xp_cpu_to_nasid);
/*
* xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
* users of XPC.
*/
-struct xpc_registration xpc_registrations[XPC_NCHANNELS];
+struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
EXPORT_SYMBOL_GPL(xpc_registrations);
/*
@@ -51,10 +70,9 @@
struct xpc_interface xpc_interface = {
(void (*)(int))xpc_notloaded,
(void (*)(int))xpc_notloaded,
- (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
- (enum xp_retval(*)(short, int, void *))xpc_notloaded,
- (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
- xpc_notloaded,
+ (enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded,
+ (enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func,
+ void *))xpc_notloaded,
(void (*)(short, int, void *))xpc_notloaded,
(enum xp_retval(*)(short, void *))xpc_notloaded
};
@@ -66,16 +84,14 @@
void
xpc_set_interface(void (*connect) (int),
void (*disconnect) (int),
- enum xp_retval (*allocate) (short, int, u32, void **),
- enum xp_retval (*send) (short, int, void *),
- enum xp_retval (*send_notify) (short, int, void *,
+ enum xp_retval (*send) (short, int, u32, void *, u16),
+ enum xp_retval (*send_notify) (short, int, u32, void *, u16,
xpc_notify_func, void *),
void (*received) (short, int, void *),
enum xp_retval (*partid_to_nasids) (short, void *))
{
xpc_interface.connect = connect;
xpc_interface.disconnect = disconnect;
- xpc_interface.allocate = allocate;
xpc_interface.send = send;
xpc_interface.send_notify = send_notify;
xpc_interface.received = received;
@@ -91,13 +107,11 @@
{
xpc_interface.connect = (void (*)(int))xpc_notloaded;
xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
- xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
- void **))xpc_notloaded;
- xpc_interface.send = (enum xp_retval(*)(short, int, void *))
+ xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16))
xpc_notloaded;
- xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
- xpc_notify_func,
- void *))xpc_notloaded;
+ xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *,
+ u16, xpc_notify_func,
+ void *))xpc_notloaded;
xpc_interface.received = (void (*)(short, int, void *))
xpc_notloaded;
xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
@@ -135,11 +149,14 @@
{
struct xpc_registration *registration;
- DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+ DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
DBUG_ON(payload_size == 0 || nentries == 0);
DBUG_ON(func == NULL);
DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
+ if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE)
+ return xpPayloadTooBig;
+
registration = &xpc_registrations[ch_number];
if (mutex_lock_interruptible(®istration->mutex) != 0)
@@ -152,7 +169,7 @@
}
/* register the channel for connection */
- registration->msg_size = XPC_MSG_SIZE(payload_size);
+ registration->entry_size = XPC_MSG_SIZE(payload_size);
registration->nentries = nentries;
registration->assigned_limit = assigned_limit;
registration->idle_limit = idle_limit;
@@ -185,7 +202,7 @@
{
struct xpc_registration *registration;
- DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+ DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
registration = &xpc_registrations[ch_number];
@@ -206,7 +223,7 @@
registration->func = NULL;
registration->key = NULL;
registration->nentries = 0;
- registration->msg_size = 0;
+ registration->entry_size = 0;
registration->assigned_limit = 0;
registration->idle_limit = 0;
@@ -221,39 +238,21 @@
int __init
xp_init(void)
{
- int ret, ch_number;
- u64 func_addr = *(u64 *)xp_nofault_PIOR;
- u64 err_func_addr = *(u64 *)xp_error_PIOR;
+ enum xp_retval ret;
+ int ch_number;
- if (!ia64_platform_is("sn2"))
+ if (is_shub())
+ ret = xp_init_sn2();
+ else if (is_uv())
+ ret = xp_init_uv();
+ else
+ ret = xpUnsupported;
+
+ if (ret != xpSuccess)
return -ENODEV;
- /*
- * Register a nofault code region which performs a cross-partition
- * PIO read. If the PIO read times out, the MCA handler will consume
- * the error and return to a kernel-provided instruction to indicate
- * an error. This PIO read exists because it is guaranteed to timeout
- * if the destination is down (AMO operations do not timeout on at
- * least some CPUs on Shubs <= v1.2, which unfortunately we have to
- * work around).
- */
- ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
- 1, 1);
- if (ret != 0) {
- printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
- ret);
- }
- /*
- * Setup the nofault PIO read target. (There is no special reason why
- * SH_IPI_ACCESS was selected.)
- */
- if (is_shub2())
- xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
- else
- xp_nofault_PIOR_target = SH1_IPI_ACCESS;
-
/* initialize the connection registration mutex */
- for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
mutex_init(&xpc_registrations[ch_number].mutex);
return 0;
@@ -264,12 +263,10 @@
void __exit
xp_exit(void)
{
- u64 func_addr = *(u64 *)xp_nofault_PIOR;
- u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
- /* unregister the PIO read nofault code region */
- (void)sn_register_nofault_code(func_addr, err_func_addr,
- err_func_addr, 1, 0);
+ if (is_shub())
+ xp_exit_sn2();
+ else if (is_uv())
+ xp_exit_uv();
}
module_exit(xp_exit);
diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c
new file mode 100644
index 0000000..1440134
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_sn2.c
@@ -0,0 +1,146 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) sn2-based functions.
+ *
+ * Architecture specific implementation of common functions.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/sn_sal.h>
+#include "xp.h"
+
+/*
+ * The export of xp_nofault_PIOR needs to happen here since it is defined
+ * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
+ * defined here.
+ */
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+
+u64 xp_nofault_PIOR_target;
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+
+/*
+ * Register a nofault code region which performs a cross-partition PIO read.
+ * If the PIO read times out, the MCA handler will consume the error and
+ * return to a kernel-provided instruction to indicate an error. This PIO read
+ * exists because it is guaranteed to timeout if the destination is down
+ * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2,
+ * which unfortunately we have to work around).
+ */
+static enum xp_retval
+xp_register_nofault_code_sn2(void)
+{
+ int ret;
+ u64 func_addr;
+ u64 err_func_addr;
+
+ func_addr = *(u64 *)xp_nofault_PIOR;
+ err_func_addr = *(u64 *)xp_error_PIOR;
+ ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
+ 1, 1);
+ if (ret != 0) {
+ dev_err(xp, "can't register nofault code, error=%d\n", ret);
+ return xpSalError;
+ }
+ /*
+ * Setup the nofault PIO read target. (There is no special reason why
+ * SH_IPI_ACCESS was selected.)
+ */
+ if (is_shub1())
+ xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+ else if (is_shub2())
+ xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+
+ return xpSuccess;
+}
+
+static void
+xp_unregister_nofault_code_sn2(void)
+{
+ u64 func_addr = *(u64 *)xp_nofault_PIOR;
+ u64 err_func_addr = *(u64 *)xp_error_PIOR;
+
+ /* unregister the PIO read nofault code region */
+ (void)sn_register_nofault_code(func_addr, err_func_addr,
+ err_func_addr, 1, 0);
+}
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_sn2(void *addr)
+{
+ return __pa(addr);
+}
+
+/*
+ * Wrapper for bte_copy().
+ *
+ * dst_pa - physical address of the destination of the transfer.
+ * src_pa - physical address of the source of the transfer.
+ * len - number of bytes to transfer from source to destination.
+ *
+ * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock.
+ */
+static enum xp_retval
+xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa,
+ size_t len)
+{
+ bte_result_t ret;
+
+ ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+ if (ret == BTE_SUCCESS)
+ return xpSuccess;
+
+ if (is_shub2()) {
+ dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa="
+ "0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa,
+ src_pa, len);
+ } else {
+ dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx "
+ "src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len);
+ }
+
+ return xpBteCopyError;
+}
+
+static int
+xp_cpu_to_nasid_sn2(int cpuid)
+{
+ return cpuid_to_nasid(cpuid);
+}
+
+enum xp_retval
+xp_init_sn2(void)
+{
+ BUG_ON(!is_shub());
+
+ xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
+ xp_partition_id = sn_partition_id;
+ xp_region_size = sn_region_size;
+
+ xp_pa = xp_pa_sn2;
+ xp_remote_memcpy = xp_remote_memcpy_sn2;
+ xp_cpu_to_nasid = xp_cpu_to_nasid_sn2;
+
+ return xp_register_nofault_code_sn2();
+}
+
+void
+xp_exit_sn2(void)
+{
+ BUG_ON(!is_shub());
+
+ xp_unregister_nofault_code_sn2();
+}
+
diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c
new file mode 100644
index 0000000..d9f7ce2
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_uv.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) uv-based functions.
+ *
+ * Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/grukservices.h"
+#include "xp.h"
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_uv(void *addr)
+{
+ return uv_gpa(addr);
+}
+
+static enum xp_retval
+xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa,
+ size_t len)
+{
+ int ret;
+
+ ret = gru_copy_gpa(dst_gpa, src_gpa, len);
+ if (ret == 0)
+ return xpSuccess;
+
+ dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx "
+ "len=%ld\n", dst_gpa, src_gpa, len);
+ return xpGruCopyError;
+}
+
+static int
+xp_cpu_to_nasid_uv(int cpuid)
+{
+ /* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */
+ return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid));
+}
+
+enum xp_retval
+xp_init_uv(void)
+{
+ BUG_ON(!is_uv());
+
+ xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+ xp_partition_id = 0; /* !!! not correct value */
+ xp_region_size = 0; /* !!! not correct value */
+
+ xp_pa = xp_pa_uv;
+ xp_remote_memcpy = xp_remote_memcpy_uv;
+ xp_cpu_to_nasid = xp_cpu_to_nasid_uv;
+
+ return xpSuccess;
+}
+
+void
+xp_exit_uv(void)
+{
+ BUG_ON(!is_uv());
+}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 11ac267..619208d 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -13,18 +13,10 @@
#ifndef _DRIVERS_MISC_SGIXP_XPC_H
#define _DRIVERS_MISC_SGIXP_XPC_H
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
+#include <linux/wait.h>
#include <linux/completion.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
#include "xp.h"
/*
@@ -36,23 +28,7 @@
#define XPC_VERSION_MAJOR(_v) ((_v) >> 4)
#define XPC_VERSION_MINOR(_v) ((_v) & 0xf)
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs. As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
- (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
+/* define frequency of the heartbeat and frequency how often it's checked */
#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
@@ -72,11 +48,11 @@
*
* reserved page header
*
- * The first cacheline of the reserved page contains the header
- * (struct xpc_rsvd_page). Before SAL initialization has completed,
+ * The first two 64-byte cachelines of the reserved page contain the
+ * header (struct xpc_rsvd_page). Before SAL initialization has completed,
* SAL has set up the following fields of the reserved page header:
- * SAL_signature, SAL_version, partid, and nasids_size. The other
- * fields are set up by XPC. (xpc_rsvd_page points to the local
+ * SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The
+ * other fields are set up by XPC. (xpc_rsvd_page points to the local
* partition's reserved page.)
*
* part_nasids mask
@@ -87,14 +63,16 @@
* the actual nasids in the entire machine (mach_nasids). We're only
* interested in the even numbered nasids (which contain the processors
* and/or memory), so we only need half as many bits to represent the
- * nasids. The part_nasids mask is located starting at the first cacheline
- * following the reserved page header. The mach_nasids mask follows right
- * after the part_nasids mask. The size in bytes of each mask is reflected
- * by the reserved page header field 'nasids_size'. (Local partition's
- * mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ * nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure
+ * to either divide or multiply by 2. The part_nasids mask is located
+ * starting at the first cacheline following the reserved page header. The
+ * mach_nasids mask follows right after the part_nasids mask. The size in
+ * bytes of each mask is reflected by the reserved page header field
+ * 'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids
+ * and xpc_mach_nasids.)
*
- * vars
- * vars part
+ * vars (ia64-sn2 only)
+ * vars part (ia64-sn2 only)
*
* Immediately following the mach_nasids mask are the XPC variables
* required by other partitions. First are those that are generic to all
@@ -102,43 +80,26 @@
* which are partition specific (vars part). These are setup by XPC.
* (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
*
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been
+ * initialized.
*/
struct xpc_rsvd_page {
u64 SAL_signature; /* SAL: unique signature */
u64 SAL_version; /* SAL: version */
- u8 partid; /* SAL: partition ID */
+ short SAL_partid; /* SAL: partition ID */
+ short max_npartitions; /* value of XPC_MAX_PARTITIONS */
u8 version;
- u8 pad1[6]; /* align to next u64 in cacheline */
- u64 vars_pa; /* physical address of struct xpc_vars */
- struct timespec stamp; /* time when reserved page was setup by XPC */
- u64 pad2[9]; /* align to last u64 in cacheline */
- u64 nasids_size; /* SAL: size of each nasid mask in bytes */
+ u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */
+ union {
+ unsigned long vars_pa; /* phys address of struct xpc_vars */
+ unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */
+ } sn;
+ unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
+ u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */
+ u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
- (_version >= _XPC_VERSION(1, 1))
-
-/*
- * compare stamps - the return value is:
- *
- * < 0, if stamp1 < stamp2
- * = 0, if stamp1 == stamp2
- * > 0, if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
- int ret;
-
- ret = stamp1->tv_sec - stamp2->tv_sec;
- if (ret == 0)
- ret = stamp1->tv_nsec - stamp2->tv_nsec;
-
- return ret;
-}
+#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
/*
* Define the structures by which XPC variables can be exported to other
@@ -154,85 +115,40 @@
* reflected by incrementing either the major or minor version numbers
* of struct xpc_vars.
*/
-struct xpc_vars {
+struct xpc_vars_sn2 {
u8 version;
u64 heartbeat;
- u64 heartbeating_to_mask;
+ DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
u64 heartbeat_offline; /* if 0, heartbeat should be changing */
- int act_nasid;
- int act_phys_cpuid;
- u64 vars_part_pa;
- u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
- AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
+ int activate_IRQ_nasid;
+ int activate_IRQ_phys_cpuid;
+ unsigned long vars_part_pa;
+ unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */
+ struct amo *amos_page; /* vaddr of page of amos from MSPEC driver */
};
#define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
- (_version >= _XPC_VERSION(3, 1))
-
-static inline int
-xpc_hb_allowed(short partid, struct xpc_vars *vars)
-{
- return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(short partid, struct xpc_vars *vars)
-{
- u64 old_mask, new_mask;
-
- do {
- old_mask = vars->heartbeating_to_mask;
- new_mask = (old_mask | (1UL << partid));
- } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
- old_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid, struct xpc_vars *vars)
-{
- u64 old_mask, new_mask;
-
- do {
- old_mask = vars->heartbeating_to_mask;
- new_mask = (old_mask & ~(1UL << partid));
- } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
- old_mask);
-}
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS 0
-#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
/*
* The following structure describes the per partition specific variables.
*
* An array of these structures, one per partition, will be defined. As a
* partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
+ * itself from that partition. It is desirable that the size of this structure
+ * evenly divides into a 128-byte cacheline, such that none of the entries in
+ * this array crosses a 128-byte cacheline boundary. As it is now, each entry
+ * occupies 64-bytes.
*/
-struct xpc_vars_part {
+struct xpc_vars_part_sn2 {
u64 magic;
- u64 openclose_args_pa; /* physical address of open and close args */
- u64 GPs_pa; /* physical address of Get/Put values */
+ unsigned long openclose_args_pa; /* phys addr of open and close args */
+ unsigned long GPs_pa; /* physical address of Get/Put values */
- u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */
- int IPI_nasid; /* nasid of where to send IPIs */
- int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */
+ unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */
+
+ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */
+ int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */
u8 nchannels; /* #of defined channels supported */
@@ -248,20 +164,95 @@
* MAGIC2 indicates that this partition has pulled the remote partititions
* per partition variables that pertain to this partition.
*/
-#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
+#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
/* the reserved page sizes and offsets */
#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2))
-#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE))
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp) ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \
- xp_nasid_mask_words))
-#define XPC_RP_VARS_PART(_rp) ((struct xpc_vars_part *) \
- ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE))
+#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \
+ XPC_RP_HEADER_SIZE))
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \
+ xpc_nasid_mask_nlongs)
+#define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *) \
+ (XPC_RP_MACH_NASIDS(_rp) + \
+ xpc_nasid_mask_nlongs))
+
+/*
+ * The activate_mq is used to send/receive GRU messages that affect XPC's
+ * heartbeat, partition active state, and channel state. This is UV only.
+ */
+struct xpc_activate_mq_msghdr_uv {
+ short partid; /* sender's partid */
+ u8 act_state; /* sender's act_state at time msg sent */
+ u8 type; /* message's type */
+ unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */
+};
+
+/* activate_mq defined message types */
+#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0
+#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1
+#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2
+#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3
+
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5
+
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9
+
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11
+
+struct xpc_activate_mq_msg_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+};
+
+struct xpc_activate_mq_msg_heartbeat_req_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ u64 heartbeat;
+};
+
+struct xpc_activate_mq_msg_activate_req_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ unsigned long rp_gpa;
+ unsigned long activate_mq_gpa;
+};
+
+struct xpc_activate_mq_msg_deactivate_req_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closerequest_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+ enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closereply_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+};
+
+struct xpc_activate_mq_msg_chctl_openrequest_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+ short entry_size; /* size of notify_mq's GRU messages */
+ short local_nentries; /* ??? Is this needed? What is? */
+};
+
+struct xpc_activate_mq_msg_chctl_openreply_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+ short remote_nentries; /* ??? Is this needed? What is? */
+ short local_nentries; /* ??? Is this needed? What is? */
+ unsigned long local_notify_mq_gpa;
+};
/*
* Functions registered by add_timer() or called by kernel_thread() only
@@ -270,22 +261,22 @@
* the passed argument.
*/
#define XPC_PACK_ARGS(_arg1, _arg2) \
- ((((u64) _arg1) & 0xffffffff) | \
- ((((u64) _arg2) & 0xffffffff) << 32))
+ ((((u64)_arg1) & 0xffffffff) | \
+ ((((u64)_arg2) & 0xffffffff) << 32))
-#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff)
+#define XPC_UNPACK_ARG1(_args) (((u64)_args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args) ((((u64)_args) >> 32) & 0xffffffff)
/*
* Define a Get/Put value pair (pointers) used with a message queue.
*/
-struct xpc_gp {
+struct xpc_gp_sn2 {
s64 get; /* Get value */
s64 put; /* Put value */
};
#define XPC_GP_SIZE \
- L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+ L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS)
/*
* Define a structure that contains arguments associated with opening and
@@ -293,31 +284,89 @@
*/
struct xpc_openclose_args {
u16 reason; /* reason why channel is closing */
- u16 msg_size; /* sizeof each message entry */
+ u16 entry_size; /* sizeof each message entry */
u16 remote_nentries; /* #of message entries in remote msg queue */
u16 local_nentries; /* #of message entries in local msg queue */
- u64 local_msgqueue_pa; /* physical address of local message queue */
+ unsigned long local_msgqueue_pa; /* phys addr of local message queue */
};
#define XPC_OPENCLOSE_ARGS_SIZE \
- L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+ L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
+ XPC_MAX_NCHANNELS)
-/* struct xpc_msg flags */
-
-#define XPC_M_DONE 0x01 /* msg has been received/consumed */
-#define XPC_M_READY 0x02 /* msg is ready to be sent */
-#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */
-
-#define XPC_MSG_ADDRESS(_payload) \
- ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
/*
- * Defines notify entry.
+ * Structures to define a fifo singly-linked list.
+ */
+
+struct xpc_fifo_entry_uv {
+ struct xpc_fifo_entry_uv *next;
+};
+
+struct xpc_fifo_head_uv {
+ struct xpc_fifo_entry_uv *first;
+ struct xpc_fifo_entry_uv *last;
+ spinlock_t lock;
+ int n_entries;
+};
+
+/*
+ * Define a sn2 styled message.
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message entry (within a message queue) must be a 128-byte
+ * cacheline sized multiple in order to facilitate the BTE transfer of messages
+ * from one message queue to another.
+ */
+struct xpc_msg_sn2 {
+ u8 flags; /* FOR XPC INTERNAL USE ONLY */
+ u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */
+ s64 number; /* FOR XPC INTERNAL USE ONLY */
+
+ u64 payload; /* user defined portion of message */
+};
+
+/* struct xpc_msg_sn2 flags */
+
+#define XPC_M_SN2_DONE 0x01 /* msg has been received/consumed */
+#define XPC_M_SN2_READY 0x02 /* msg is ready to be sent */
+#define XPC_M_SN2_INTERRUPT 0x04 /* send interrupt when msg consumed */
+
+/*
+ * The format of a uv XPC notify_mq GRU message is as follows:
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message (payload and header) sent via the GRU must be either 1
+ * or 2 GRU_CACHE_LINE_BYTES in length.
+ */
+
+struct xpc_notify_mq_msghdr_uv {
+ union {
+ unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
+ struct xpc_fifo_entry_uv next; /* FOR XPC INTERNAL USE ONLY */
+ } u;
+ short partid; /* FOR XPC INTERNAL USE ONLY */
+ u8 ch_number; /* FOR XPC INTERNAL USE ONLY */
+ u8 size; /* FOR XPC INTERNAL USE ONLY */
+ unsigned int msg_slot_number; /* FOR XPC INTERNAL USE ONLY */
+};
+
+struct xpc_notify_mq_msg_uv {
+ struct xpc_notify_mq_msghdr_uv hdr;
+ unsigned long payload;
+};
+
+/*
+ * Define sn2's notify entry.
*
* This is used to notify a message's sender that their message was received
* and consumed by the intended recipient.
*/
-struct xpc_notify {
+struct xpc_notify_sn2 {
u8 type; /* type of notification */
/* the following two fields are only used if type == XPC_N_CALL */
@@ -325,9 +374,20 @@
void *key; /* pointer to user's key */
};
-/* struct xpc_notify type of notification */
+/* struct xpc_notify_sn2 type of notification */
-#define XPC_N_CALL 0x01 /* notify function provided by user */
+#define XPC_N_CALL 0x01 /* notify function provided by user */
+
+/*
+ * Define uv's version of the notify entry. It additionally is used to allocate
+ * a msg slot on the remote partition into which is copied a sent message.
+ */
+struct xpc_send_msg_slot_uv {
+ struct xpc_fifo_entry_uv next;
+ unsigned int msg_slot_number;
+ xpc_notify_func func; /* user's notify function */
+ void *key; /* pointer to user's key */
+};
/*
* Define the structure that manages all the stuff required by a channel. In
@@ -339,8 +399,12 @@
* There is an array of these structures for each remote partition. It is
* allocated at the time a partition becomes active. The array contains one
* of these structures for each potential channel connection to that partition.
+ */
+
+/*
+ * The following is sn2 only.
*
- * Each of these structures manages two message queues (circular buffers).
+ * Each channel structure manages two message queues (circular buffers).
* They are allocated at the time a channel connection is made. One of
* these message queues (local_msgqueue) holds the locally created messages
* that are destined for the remote partition. The other of these message
@@ -407,58 +471,72 @@
* new messages, by the clearing of the message flags of the acknowledged
* messages.
*/
+
+struct xpc_channel_sn2 {
+ struct xpc_openclose_args *local_openclose_args; /* args passed on */
+ /* opening or closing of channel */
+
+ void *local_msgqueue_base; /* base address of kmalloc'd space */
+ struct xpc_msg_sn2 *local_msgqueue; /* local message queue */
+ void *remote_msgqueue_base; /* base address of kmalloc'd space */
+ struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */
+ /* partition's local message queue */
+ unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */
+ /* local message queue */
+
+ struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */
+
+ /* various flavors of local and remote Get/Put values */
+
+ struct xpc_gp_sn2 *local_GP; /* local Get/Put values */
+ struct xpc_gp_sn2 remote_GP; /* remote Get/Put values */
+ struct xpc_gp_sn2 w_local_GP; /* working local Get/Put values */
+ struct xpc_gp_sn2 w_remote_GP; /* working remote Get/Put values */
+ s64 next_msg_to_pull; /* Put value of next msg to pull */
+
+ struct mutex msg_to_pull_mutex; /* next msg to pull serialization */
+};
+
+struct xpc_channel_uv {
+ unsigned long remote_notify_mq_gpa; /* gru phys address of remote */
+ /* partition's notify mq */
+
+ struct xpc_send_msg_slot_uv *send_msg_slots;
+ struct xpc_notify_mq_msg_uv *recv_msg_slots;
+
+ struct xpc_fifo_head_uv msg_slot_free_list;
+ struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */
+};
+
struct xpc_channel {
short partid; /* ID of remote partition connected */
spinlock_t lock; /* lock for updating this structure */
- u32 flags; /* general flags */
+ unsigned int flags; /* general flags */
enum xp_retval reason; /* reason why channel is disconnect'g */
int reason_line; /* line# disconnect initiated from */
u16 number; /* channel # */
- u16 msg_size; /* sizeof each msg entry */
+ u16 entry_size; /* sizeof each msg entry */
u16 local_nentries; /* #of msg entries in local msg queue */
u16 remote_nentries; /* #of msg entries in remote msg queue */
- void *local_msgqueue_base; /* base address of kmalloc'd space */
- struct xpc_msg *local_msgqueue; /* local message queue */
- void *remote_msgqueue_base; /* base address of kmalloc'd space */
- struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */
- /* local message queue */
- u64 remote_msgqueue_pa; /* phys addr of remote partition's */
- /* local message queue */
-
atomic_t references; /* #of external references to queues */
atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
- u8 delayed_IPI_flags; /* IPI flags received, but delayed */
+ u8 delayed_chctl_flags; /* chctl flags received, but delayed */
/* action until channel disconnected */
- /* queue of msg senders who want to be notified when msg received */
-
atomic_t n_to_notify; /* #of msg senders to notify */
- struct xpc_notify *notify_queue; /* notify queue for messages sent */
xpc_channel_func func; /* user's channel function */
void *key; /* pointer to user's key */
- struct mutex msg_to_pull_mutex; /* next msg to pull serialization */
struct completion wdisconnect_wait; /* wait for channel disconnect */
- struct xpc_openclose_args *local_openclose_args; /* args passed on */
- /* opening or closing of channel */
-
- /* various flavors of local and remote Get/Put values */
-
- struct xpc_gp *local_GP; /* local Get/Put values */
- struct xpc_gp remote_GP; /* remote Get/Put values */
- struct xpc_gp w_local_GP; /* working local Get/Put values */
- struct xpc_gp w_remote_GP; /* working remote Get/Put values */
- s64 next_msg_to_pull; /* Put value of next msg to pull */
-
/* kthread management related fields */
atomic_t kthreads_assigned; /* #of kthreads assigned to channel */
@@ -469,6 +547,11 @@
wait_queue_head_t idle_wq; /* idle kthread wait queue */
+ union {
+ struct xpc_channel_sn2 sn2;
+ struct xpc_channel_uv uv;
+ } sn;
+
} ____cacheline_aligned;
/* struct xpc_channel flags */
@@ -501,33 +584,128 @@
#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */
/*
- * Manages channels on a partition basis. There is one of these structures
+ * The channel control flags (chctl) union consists of a 64-bit variable which
+ * is divided up into eight bytes, ordered from right to left. Byte zero
+ * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte
+ * can have one or more of the chctl flags set in it.
+ */
+
+union xpc_channel_ctl_flags {
+ u64 all_flags;
+ u8 flags[XPC_MAX_NCHANNELS];
+};
+
+/* chctl flags */
+#define XPC_CHCTL_CLOSEREQUEST 0x01
+#define XPC_CHCTL_CLOSEREPLY 0x02
+#define XPC_CHCTL_OPENREQUEST 0x04
+#define XPC_CHCTL_OPENREPLY 0x08
+#define XPC_CHCTL_MSGREQUEST 0x10
+
+#define XPC_OPENCLOSE_CHCTL_FLAGS \
+ (XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
+ XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST
+
+static inline int
+xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+ int ch_number;
+
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+ if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS)
+ return 1;
+ }
+ return 0;
+}
+
+static inline int
+xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+ int ch_number;
+
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+ if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Manage channels on a partition basis. There is one of these structures
* for each partition (a partition will never utilize the structure that
* represents itself).
*/
+
+struct xpc_partition_sn2 {
+ unsigned long remote_amos_page_pa; /* paddr of partition's amos page */
+ int activate_IRQ_nasid; /* active partition's act/deact nasid */
+ int activate_IRQ_phys_cpuid; /* active part's act/deact phys cpuid */
+
+ unsigned long remote_vars_pa; /* phys addr of partition's vars */
+ unsigned long remote_vars_part_pa; /* paddr of partition's vars part */
+ u8 remote_vars_version; /* version# of partition's vars */
+
+ void *local_GPs_base; /* base address of kmalloc'd space */
+ struct xpc_gp_sn2 *local_GPs; /* local Get/Put values */
+ void *remote_GPs_base; /* base address of kmalloc'd space */
+ struct xpc_gp_sn2 *remote_GPs; /* copy of remote partition's local */
+ /* Get/Put values */
+ unsigned long remote_GPs_pa; /* phys addr of remote partition's local */
+ /* Get/Put values */
+
+ void *local_openclose_args_base; /* base address of kmalloc'd space */
+ struct xpc_openclose_args *local_openclose_args; /* local's args */
+ unsigned long remote_openclose_args_pa; /* phys addr of remote's args */
+
+ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */
+ int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */
+ char notify_IRQ_owner[8]; /* notify IRQ's owner's name */
+
+ struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */
+ struct amo *local_chctl_amo_va; /* address of chctl flags' amo */
+
+ struct timer_list dropped_notify_IRQ_timer; /* dropped IRQ timer */
+};
+
+struct xpc_partition_uv {
+ unsigned long remote_activate_mq_gpa; /* gru phys address of remote */
+ /* partition's activate mq */
+ spinlock_t flags_lock; /* protect updating of flags */
+ unsigned int flags; /* general flags */
+ u8 remote_act_state; /* remote partition's act_state */
+ u8 act_state_req; /* act_state request from remote partition */
+ enum xp_retval reason; /* reason for deactivate act_state request */
+ u64 heartbeat; /* incremented by remote partition */
+};
+
+/* struct xpc_partition_uv flags */
+
+#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001
+#define XPC_P_ENGAGED_UV 0x00000002
+
+/* struct xpc_partition_uv act_state change requests */
+
+#define XPC_P_ASR_ACTIVATE_UV 0x01
+#define XPC_P_ASR_REACTIVATE_UV 0x02
+#define XPC_P_ASR_DEACTIVATE_UV 0x03
+
struct xpc_partition {
/* XPC HB infrastructure */
u8 remote_rp_version; /* version# of partition's rsvd pg */
- struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */
- u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
- u64 remote_vars_pa; /* phys addr of partition's vars */
- u64 remote_vars_part_pa; /* phys addr of partition's vars part */
+ unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */
+ unsigned long remote_rp_pa; /* phys addr of partition's rsvd pg */
u64 last_heartbeat; /* HB at last read */
- u64 remote_amos_page_pa; /* phys addr of partition's amos page */
- int remote_act_nasid; /* active part's act/deact nasid */
- int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */
- u32 act_IRQ_rcvd; /* IRQs since activation */
+ u32 activate_IRQ_rcvd; /* IRQs since activation */
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
- u8 remote_vars_version; /* version# of partition's vars */
enum xp_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
- int reactivate_nasid; /* nasid in partition to reactivate */
- unsigned long disengage_request_timeout; /* timeout in jiffies */
- struct timer_list disengage_request_timer;
+ unsigned long disengage_timeout; /* timeout in jiffies */
+ struct timer_list disengage_timer;
/* XPC infrastructure referencing and teardown control */
@@ -535,85 +713,63 @@
wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
atomic_t references; /* #of references to infrastructure */
- /*
- * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
- * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
- * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
- * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
- */
-
u8 nchannels; /* #of defined channels supported */
atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
atomic_t nchannels_engaged; /* #of channels engaged with remote part */
struct xpc_channel *channels; /* array of channel structures */
- void *local_GPs_base; /* base address of kmalloc'd space */
- struct xpc_gp *local_GPs; /* local Get/Put values */
- void *remote_GPs_base; /* base address of kmalloc'd space */
- struct xpc_gp *remote_GPs; /* copy of remote partition's local */
- /* Get/Put values */
- u64 remote_GPs_pa; /* phys address of remote partition's local */
- /* Get/Put values */
+ /* fields used for managing channel avialability and activity */
- /* fields used to pass args when opening or closing a channel */
+ union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */
+ spinlock_t chctl_lock; /* chctl flags lock */
- void *local_openclose_args_base; /* base address of kmalloc'd space */
- struct xpc_openclose_args *local_openclose_args; /* local's args */
void *remote_openclose_args_base; /* base address of kmalloc'd space */
struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
/* args */
- u64 remote_openclose_args_pa; /* phys addr of remote's args */
-
- /* IPI sending, receiving and handling related fields */
-
- int remote_IPI_nasid; /* nasid of where to send IPIs */
- int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */
- AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */
-
- AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */
- u64 local_IPI_amo; /* IPI amo flags yet to be handled */
- char IPI_owner[8]; /* IPI owner's name */
- struct timer_list dropped_IPI_timer; /* dropped IPI timer */
-
- spinlock_t IPI_lock; /* IPI handler lock */
/* channel manager related fields */
atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */
wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */
+ union {
+ struct xpc_partition_sn2 sn2;
+ struct xpc_partition_uv uv;
+ } sn;
+
} ____cacheline_aligned;
/* struct xpc_partition act_state values (for XPC HB) */
-#define XPC_P_INACTIVE 0x00 /* partition is not active */
-#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */
-#define XPC_P_ACTIVATING 0x02 /* activation thread started */
-#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */
+#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */
+#define XPC_P_AS_ACTIVATION_REQ 0x01 /* created thread to activate */
+#define XPC_P_AS_ACTIVATING 0x02 /* activation thread started */
+#define XPC_P_AS_ACTIVE 0x03 /* xpc_partition_up() was called */
+#define XPC_P_AS_DEACTIVATING 0x04 /* partition deactivation initiated */
#define XPC_DEACTIVATE_PARTITION(_p, _reason) \
xpc_deactivate_partition(__LINE__, (_p), (_reason))
/* struct xpc_partition setup_state values */
-#define XPC_P_UNSET 0x00 /* infrastructure was never setup */
-#define XPC_P_SETUP 0x01 /* infrastructure is setup */
-#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
+#define XPC_P_SS_UNSET 0x00 /* infrastructure was never setup */
+#define XPC_P_SS_SETUP 0x01 /* infrastructure is setup */
+#define XPC_P_SS_WTEARDOWN 0x02 /* waiting to teardown infrastructure */
+#define XPC_P_SS_TORNDOWN 0x03 /* infrastructure is torndown */
/*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
+ * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the
+ * following interval #of seconds before checking for dropped notify IRQs.
+ * These can occur whenever an IRQ's associated amo write doesn't complete
+ * until after the IRQ was received.
*/
-#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
+#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL (0.25 * HZ)
/* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
+#define XPC_DISENGAGE_DEFAULT_TIMELIMIT 90
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
+/* interval in seconds to print 'waiting deactivation' messages */
+#define XPC_DEACTIVATE_PRINTMSG_INTERVAL 10
#define XPC_PARTID(_p) ((short)((_p) - &xpc_partitions[0]))
@@ -623,33 +779,92 @@
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern int xpc_disengage_request_timedout;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern int xpc_disengage_timelimit;
+extern int xpc_disengage_timedout;
+extern int xpc_activate_IRQ_rcvd;
+extern spinlock_t xpc_activate_IRQ_rcvd_lock;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
+extern void *xpc_heartbeating_to_mask;
+extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
+extern int (*xpc_setup_partitions_sn) (void);
+extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
+ unsigned long *,
+ size_t *);
+extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
+extern void (*xpc_heartbeat_init) (void);
+extern void (*xpc_heartbeat_exit) (void);
+extern void (*xpc_increment_heartbeat) (void);
+extern void (*xpc_offline_heartbeat) (void);
+extern void (*xpc_online_heartbeat) (void);
+extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
+extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
+extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
+extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
+extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
+extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
+extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
+extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
+extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
+ unsigned long, int);
+extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
+extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
+extern void (*xpc_cancel_partition_deactivation_request) (
+ struct xpc_partition *);
+extern void (*xpc_process_activate_IRQ_rcvd) (void);
+extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
+extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
+
+extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
+extern int (*xpc_partition_engaged) (short);
+extern int (*xpc_any_partition_engaged) (void);
+extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
+extern void (*xpc_assume_partition_disengaged) (short);
+
+extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
+ unsigned long *);
+extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
+ unsigned long *);
+extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
+ unsigned long *);
+extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+
+extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
+ unsigned long);
+
+extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
+ u16, u8, xpc_notify_func, void *);
+extern void (*xpc_received_payload) (struct xpc_channel *, void *);
+
+/* found in xpc_sn2.c */
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
+
+/* found in xpc_uv.c */
+extern int xpc_init_uv(void);
+extern void xpc_exit_uv(void);
/* found in xpc_partition.c */
extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
+extern int xpc_nasid_mask_nlongs;
extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char *xpc_remote_copy_buffer;
-extern void *xpc_remote_copy_buffer_base;
+extern unsigned long *xpc_mach_nasids;
+extern struct xpc_partition *xpc_partitions;
extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_setup_rsvd_page(void);
+extern void xpc_teardown_rsvd_page(void);
+extern int xpc_identify_activate_IRQ_sender(void);
extern int xpc_partition_disengaged(struct xpc_partition *);
extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
+extern enum xp_retval xpc_get_remote_rp(int, unsigned long *,
+ struct xpc_rsvd_page *,
+ unsigned long *);
extern void xpc_deactivate_partition(const int, struct xpc_partition *,
enum xp_retval);
extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
@@ -657,21 +872,52 @@
/* found in xpc_channel.c */
extern void xpc_initiate_connect(int);
extern void xpc_initiate_disconnect(int);
-extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
-extern enum xp_retval xpc_initiate_send(short, int, void *);
-extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *);
+extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16);
+extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16,
xpc_notify_func, void *);
extern void xpc_initiate_received(short, int, void *);
-extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_process_sent_chctl_flags(struct xpc_partition *);
extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_deliver_payload(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
enum xp_retval, unsigned long *);
extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+static inline int
+xpc_hb_allowed(short partid, void *heartbeating_to_mask)
+{
+ return test_bit(partid, heartbeating_to_mask);
+}
+
+static inline int
+xpc_any_hbs_allowed(void)
+{
+ DBUG_ON(xpc_heartbeating_to_mask == NULL);
+ return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
+
+static inline void
+xpc_allow_hb(short partid)
+{
+ DBUG_ON(xpc_heartbeating_to_mask == NULL);
+ set_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_hb(short partid)
+{
+ DBUG_ON(xpc_heartbeating_to_mask == NULL);
+ clear_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_all_hbs(void)
+{
+ DBUG_ON(xpc_heartbeating_to_mask == NULL);
+ bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
static inline void
xpc_wakeup_channel_mgr(struct xpc_partition *part)
@@ -713,7 +959,7 @@
s32 refs = atomic_dec_return(&part->references);
DBUG_ON(refs < 0);
- if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN)
+ if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN)
wake_up(&part->teardown_wq);
}
@@ -723,7 +969,7 @@
int setup;
atomic_inc(&part->references);
- setup = (part->setup_state == XPC_P_SETUP);
+ setup = (part->setup_state == XPC_P_SS_SETUP);
if (!setup)
xpc_part_deref(part);
@@ -741,416 +987,4 @@
(_p)->reason_line = _line; \
}
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
- (XPC_ENGAGED_PARTITIONS_AMO *
- sizeof(AMO_t)));
-
- local_irq_save(irq_flags);
-
- /* set bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
- (1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
- (XPC_ENGAGED_PARTITIONS_AMO *
- sizeof(AMO_t)));
-
- local_irq_save(irq_flags);
-
- /* clear bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
- ~(1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
- (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
- local_irq_save(irq_flags);
-
- /* set bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
- (1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
- (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
- local_irq_save(irq_flags);
-
- /* clear bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
- ~(1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
- /* return our partition's AMO variable ANDed with partid_mask */
- return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
- partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
- /* return our partition's AMO variable ANDed with partid_mask */
- return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
- partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
- /* clear bit(s) based on partid_mask in our partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
- ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
- /* clear bit(s) based on partid_mask in our partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
- ~partid_mask);
-}
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
- return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
-}
-
-static inline enum xp_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
- int ret = 0;
- unsigned long irq_flags;
-
- local_irq_save(irq_flags);
-
- FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
- sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-
- return ((ret == 0) ? xpSuccess : xpPioReadError);
-}
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
- int to_phys_cpuid)
-{
- int w_index = XPC_NASID_W_INDEX(from_nasid);
- int b_index = XPC_NASID_B_INDEX(from_nasid);
- AMO_t *amos = (AMO_t *)__va(amos_page_pa +
- (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
- (void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
- to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
- xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
- vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
- part->remote_act_nasid,
- part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
- xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
- part->remote_act_nasid,
- part->remote_act_phys_cpuid);
-}
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
- xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
- unsigned long *irq_flags)
-{
- struct xpc_partition *part = &xpc_partitions[ch->partid];
- enum xp_retval ret;
-
- if (likely(part->act_state != XPC_P_DEACTIVATING)) {
- ret = xpc_IPI_send(part->remote_IPI_amo_va,
- (u64)ipi_flag << (ch->number * 8),
- part->remote_IPI_nasid,
- part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
- dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
- ipi_flag_string, ch->partid, ch->number, ret);
- if (unlikely(ret != xpSuccess)) {
- if (irq_flags != NULL)
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- XPC_DEACTIVATE_PARTITION(part, ret);
- if (irq_flags != NULL)
- spin_lock_irqsave(&ch->lock, *irq_flags);
- }
- }
-}
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
- xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
- char *ipi_flag_string)
-{
- struct xpc_partition *part = &xpc_partitions[ch->partid];
-
- FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable),
- FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8)));
- dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
- ipi_flag_string, ch->partid, ch->number);
-}
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define XPC_IPI_CLOSEREQUEST 0x01
-#define XPC_IPI_CLOSEREPLY 0x02
-#define XPC_IPI_OPENREQUEST 0x04
-#define XPC_IPI_OPENREPLY 0x08
-#define XPC_IPI_MSGREQUEST 0x10
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010UL)
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
- args->reason = ch->reason;
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
- args->msg_size = ch->msg_size;
- args->local_nentries = ch->local_nentries;
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
- args->remote_nentries = ch->remote_nentries;
- args->local_nentries = ch->local_nentries;
- args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
- XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
- AMO_t *amo = xpc_vars->amos_page + index;
-
- (void)xpc_IPI_receive(amo); /* clear AMO variable */
- return amo;
-}
-
-static inline enum xp_retval
-xpc_map_bte_errors(bte_result_t error)
-{
- return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
-}
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
- u64 IPI_amo;
- unsigned long irq_flags;
-
- IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
- if (IPI_amo == 0)
- return;
-
- spin_lock_irqsave(&part->IPI_lock, irq_flags);
- part->local_IPI_amo |= IPI_amo;
- spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
- dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
- XPC_PARTID(part), IPI_amo);
-
- xpc_wakeup_channel_mgr(part);
-}
-
#endif /* _DRIVERS_MISC_SGIXP_XPC_H */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9c90c2d..9cd2ebe 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -14,536 +14,10 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
#include "xpc.h"
/*
- * Guarantee that the kzalloc'd memory is cacheline aligned.
- */
-static void *
-xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
- /* see if kzalloc will give us cachline aligned memory by default */
- *base = kzalloc(size, flags);
- if (*base == NULL)
- return NULL;
-
- if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
- return *base;
-
- kfree(*base);
-
- /* nope, we'll have to do it ourselves */
- *base = kzalloc(size + L1_CACHE_BYTES, flags);
- if (*base == NULL)
- return NULL;
-
- return (void *)L1_CACHE_ALIGN((u64)*base);
-}
-
-/*
- * Set up the initial values for the XPartition Communication channels.
- */
-static void
-xpc_initialize_channels(struct xpc_partition *part, short partid)
-{
- int ch_number;
- struct xpc_channel *ch;
-
- for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
- ch = &part->channels[ch_number];
-
- ch->partid = partid;
- ch->number = ch_number;
- ch->flags = XPC_C_DISCONNECTED;
-
- ch->local_GP = &part->local_GPs[ch_number];
- ch->local_openclose_args =
- &part->local_openclose_args[ch_number];
-
- atomic_set(&ch->kthreads_assigned, 0);
- atomic_set(&ch->kthreads_idle, 0);
- atomic_set(&ch->kthreads_active, 0);
-
- atomic_set(&ch->references, 0);
- atomic_set(&ch->n_to_notify, 0);
-
- spin_lock_init(&ch->lock);
- mutex_init(&ch->msg_to_pull_mutex);
- init_completion(&ch->wdisconnect_wait);
-
- atomic_set(&ch->n_on_msg_allocate_wq, 0);
- init_waitqueue_head(&ch->msg_allocate_wq);
- init_waitqueue_head(&ch->idle_wq);
- }
-}
-
-/*
- * Setup the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-enum xp_retval
-xpc_setup_infrastructure(struct xpc_partition *part)
-{
- int ret, cpuid;
- struct timer_list *timer;
- short partid = XPC_PARTID(part);
-
- /*
- * Zero out MOST of the entry for this partition. Only the fields
- * starting with `nchannels' will be zeroed. The preceding fields must
- * remain `viable' across partition ups and downs, since they may be
- * referenced during this memset() operation.
- */
- memset(&part->nchannels, 0, sizeof(struct xpc_partition) -
- offsetof(struct xpc_partition, nchannels));
-
- /*
- * Allocate all of the channel structures as a contiguous chunk of
- * memory.
- */
- part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
- GFP_KERNEL);
- if (part->channels == NULL) {
- dev_err(xpc_chan, "can't get memory for channels\n");
- return xpNoMemory;
- }
-
- part->nchannels = XPC_NCHANNELS;
-
- /* allocate all the required GET/PUT values */
-
- part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
- GFP_KERNEL,
- &part->local_GPs_base);
- if (part->local_GPs == NULL) {
- kfree(part->channels);
- part->channels = NULL;
- dev_err(xpc_chan, "can't get memory for local get/put "
- "values\n");
- return xpNoMemory;
- }
-
- part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
- GFP_KERNEL,
- &part->
- remote_GPs_base);
- if (part->remote_GPs == NULL) {
- dev_err(xpc_chan, "can't get memory for remote get/put "
- "values\n");
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->channels);
- part->channels = NULL;
- return xpNoMemory;
- }
-
- /* allocate all the required open and close args */
-
- part->local_openclose_args =
- xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
- &part->local_openclose_args_base);
- if (part->local_openclose_args == NULL) {
- dev_err(xpc_chan, "can't get memory for local connect args\n");
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->channels);
- part->channels = NULL;
- return xpNoMemory;
- }
-
- part->remote_openclose_args =
- xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
- &part->remote_openclose_args_base);
- if (part->remote_openclose_args == NULL) {
- dev_err(xpc_chan, "can't get memory for remote connect args\n");
- kfree(part->local_openclose_args_base);
- part->local_openclose_args = NULL;
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->channels);
- part->channels = NULL;
- return xpNoMemory;
- }
-
- xpc_initialize_channels(part, partid);
-
- atomic_set(&part->nchannels_active, 0);
- atomic_set(&part->nchannels_engaged, 0);
-
- /* local_IPI_amo were set to 0 by an earlier memset() */
-
- /* Initialize this partitions AMO_t structure */
- part->local_IPI_amo_va = xpc_IPI_init(partid);
-
- spin_lock_init(&part->IPI_lock);
-
- atomic_set(&part->channel_mgr_requests, 1);
- init_waitqueue_head(&part->channel_mgr_wq);
-
- sprintf(part->IPI_owner, "xpc%02d", partid);
- ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
- part->IPI_owner, (void *)(u64)partid);
- if (ret != 0) {
- dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
- "errno=%d\n", -ret);
- kfree(part->remote_openclose_args_base);
- part->remote_openclose_args = NULL;
- kfree(part->local_openclose_args_base);
- part->local_openclose_args = NULL;
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->channels);
- part->channels = NULL;
- return xpLackOfResources;
- }
-
- /* Setup a timer to check for dropped IPIs */
- timer = &part->dropped_IPI_timer;
- init_timer(timer);
- timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check;
- timer->data = (unsigned long)part;
- timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT;
- add_timer(timer);
-
- /*
- * With the setting of the partition setup_state to XPC_P_SETUP, we're
- * declaring that this partition is ready to go.
- */
- part->setup_state = XPC_P_SETUP;
-
- /*
- * Setup the per partition specific variables required by the
- * remote partition to establish channel connections with us.
- *
- * The setting of the magic # indicates that these per partition
- * specific variables are ready to be used.
- */
- xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs);
- xpc_vars_part[partid].openclose_args_pa =
- __pa(part->local_openclose_args);
- xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va);
- cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */
- xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid);
- xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid);
- xpc_vars_part[partid].nchannels = part->nchannels;
- xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
-
- return xpSuccess;
-}
-
-/*
- * Create a wrapper that hides the underlying mechanism for pulling a cacheline
- * (or multiple cachelines) from a remote partition.
- *
- * src must be a cacheline aligned physical address on the remote partition.
- * dst must be a cacheline aligned virtual address on this partition.
- * cnt must be an cacheline sized
- */
-static enum xp_retval
-xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
- const void *src, size_t cnt)
-{
- bte_result_t bte_ret;
-
- DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src));
- DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst));
- DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
-
- if (part->act_state == XPC_P_DEACTIVATING)
- return part->reason;
-
- bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
- (BTE_NORMAL | BTE_WACQUIRE), NULL);
- if (bte_ret == BTE_SUCCESS)
- return xpSuccess;
-
- dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
- XPC_PARTID(part), bte_ret);
-
- return xpc_map_bte_errors(bte_ret);
-}
-
-/*
- * Pull the remote per partition specific variables from the specified
- * partition.
- */
-enum xp_retval
-xpc_pull_remote_vars_part(struct xpc_partition *part)
-{
- u8 buffer[L1_CACHE_BYTES * 2];
- struct xpc_vars_part *pulled_entry_cacheline =
- (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
- struct xpc_vars_part *pulled_entry;
- u64 remote_entry_cacheline_pa, remote_entry_pa;
- short partid = XPC_PARTID(part);
- enum xp_retval ret;
-
- /* pull the cacheline that contains the variables we're interested in */
-
- DBUG_ON(part->remote_vars_part_pa !=
- L1_CACHE_ALIGN(part->remote_vars_part_pa));
- DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2);
-
- remote_entry_pa = part->remote_vars_part_pa +
- sn_partition_id * sizeof(struct xpc_vars_part);
-
- remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
-
- pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline +
- (remote_entry_pa &
- (L1_CACHE_BYTES - 1)));
-
- ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
- (void *)remote_entry_cacheline_pa,
- L1_CACHE_BYTES);
- if (ret != xpSuccess) {
- dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
- "partition %d, ret=%d\n", partid, ret);
- return ret;
- }
-
- /* see if they've been set up yet */
-
- if (pulled_entry->magic != XPC_VP_MAGIC1 &&
- pulled_entry->magic != XPC_VP_MAGIC2) {
-
- if (pulled_entry->magic != 0) {
- dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
- "partition %d has bad magic value (=0x%lx)\n",
- partid, sn_partition_id, pulled_entry->magic);
- return xpBadMagic;
- }
-
- /* they've not been initialized yet */
- return xpRetry;
- }
-
- if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
-
- /* validate the variables */
-
- if (pulled_entry->GPs_pa == 0 ||
- pulled_entry->openclose_args_pa == 0 ||
- pulled_entry->IPI_amo_pa == 0) {
-
- dev_err(xpc_chan, "partition %d's XPC vars_part for "
- "partition %d are not valid\n", partid,
- sn_partition_id);
- return xpInvalidAddress;
- }
-
- /* the variables we imported look to be valid */
-
- part->remote_GPs_pa = pulled_entry->GPs_pa;
- part->remote_openclose_args_pa =
- pulled_entry->openclose_args_pa;
- part->remote_IPI_amo_va =
- (AMO_t *)__va(pulled_entry->IPI_amo_pa);
- part->remote_IPI_nasid = pulled_entry->IPI_nasid;
- part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid;
-
- if (part->nchannels > pulled_entry->nchannels)
- part->nchannels = pulled_entry->nchannels;
-
- /* let the other side know that we've pulled their variables */
-
- xpc_vars_part[partid].magic = XPC_VP_MAGIC2;
- }
-
- if (pulled_entry->magic == XPC_VP_MAGIC1)
- return xpRetry;
-
- return xpSuccess;
-}
-
-/*
- * Get the IPI flags and pull the openclose args and/or remote GPs as needed.
- */
-static u64
-xpc_get_IPI_flags(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- u64 IPI_amo;
- enum xp_retval ret;
-
- /*
- * See if there are any IPI flags to be handled.
- */
-
- spin_lock_irqsave(&part->IPI_lock, irq_flags);
- IPI_amo = part->local_IPI_amo;
- if (IPI_amo != 0)
- part->local_IPI_amo = 0;
-
- spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
- if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) {
- ret = xpc_pull_remote_cachelines(part,
- part->remote_openclose_args,
- (void *)part->
- remote_openclose_args_pa,
- XPC_OPENCLOSE_ARGS_SIZE);
- if (ret != xpSuccess) {
- XPC_DEACTIVATE_PARTITION(part, ret);
-
- dev_dbg(xpc_chan, "failed to pull openclose args from "
- "partition %d, ret=%d\n", XPC_PARTID(part),
- ret);
-
- /* don't bother processing IPIs anymore */
- IPI_amo = 0;
- }
- }
-
- if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) {
- ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
- (void *)part->remote_GPs_pa,
- XPC_GP_SIZE);
- if (ret != xpSuccess) {
- XPC_DEACTIVATE_PARTITION(part, ret);
-
- dev_dbg(xpc_chan, "failed to pull GPs from partition "
- "%d, ret=%d\n", XPC_PARTID(part), ret);
-
- /* don't bother processing IPIs anymore */
- IPI_amo = 0;
- }
- }
-
- return IPI_amo;
-}
-
-/*
- * Allocate the local message queue and the notify queue.
- */
-static enum xp_retval
-xpc_allocate_local_msgqueue(struct xpc_channel *ch)
-{
- unsigned long irq_flags;
- int nentries;
- size_t nbytes;
-
- for (nentries = ch->local_nentries; nentries > 0; nentries--) {
-
- nbytes = nentries * ch->msg_size;
- ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
- GFP_KERNEL,
- &ch->local_msgqueue_base);
- if (ch->local_msgqueue == NULL)
- continue;
-
- nbytes = nentries * sizeof(struct xpc_notify);
- ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
- if (ch->notify_queue == NULL) {
- kfree(ch->local_msgqueue_base);
- ch->local_msgqueue = NULL;
- continue;
- }
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (nentries < ch->local_nentries) {
- dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
- "partid=%d, channel=%d\n", nentries,
- ch->local_nentries, ch->partid, ch->number);
-
- ch->local_nentries = nentries;
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpSuccess;
- }
-
- dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
- "queue, partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpNoMemory;
-}
-
-/*
- * Allocate the cached remote message queue.
- */
-static enum xp_retval
-xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
-{
- unsigned long irq_flags;
- int nentries;
- size_t nbytes;
-
- DBUG_ON(ch->remote_nentries <= 0);
-
- for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
-
- nbytes = nentries * ch->msg_size;
- ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
- GFP_KERNEL,
- &ch->remote_msgqueue_base);
- if (ch->remote_msgqueue == NULL)
- continue;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (nentries < ch->remote_nentries) {
- dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
- "partid=%d, channel=%d\n", nentries,
- ch->remote_nentries, ch->partid, ch->number);
-
- ch->remote_nentries = nentries;
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpSuccess;
- }
-
- dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
- "partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpNoMemory;
-}
-
-/*
- * Allocate message queues and other stuff associated with a channel.
- *
- * Note: Assumes all of the channel sizes are filled in.
- */
-static enum xp_retval
-xpc_allocate_msgqueues(struct xpc_channel *ch)
-{
- unsigned long irq_flags;
- enum xp_retval ret;
-
- DBUG_ON(ch->flags & XPC_C_SETUP);
-
- ret = xpc_allocate_local_msgqueue(ch);
- if (ret != xpSuccess)
- return ret;
-
- ret = xpc_allocate_remote_msgqueue(ch);
- if (ret != xpSuccess) {
- kfree(ch->local_msgqueue_base);
- ch->local_msgqueue = NULL;
- kfree(ch->notify_queue);
- ch->notify_queue = NULL;
- return ret;
- }
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- ch->flags |= XPC_C_SETUP;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-
- return xpSuccess;
-}
-
-/*
* Process a connect message from a remote partition.
*
* Note: xpc_process_connect() is expecting to be called with the
@@ -565,30 +39,29 @@
if (!(ch->flags & XPC_C_SETUP)) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- ret = xpc_allocate_msgqueues(ch);
+ ret = xpc_setup_msg_structures(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+ ch->flags |= XPC_C_SETUP;
+
if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
return;
- DBUG_ON(!(ch->flags & XPC_C_SETUP));
DBUG_ON(ch->local_msgqueue == NULL);
DBUG_ON(ch->remote_msgqueue == NULL);
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
ch->flags |= XPC_C_OPENREPLY;
- xpc_IPI_send_openreply(ch, irq_flags);
+ xpc_send_chctl_openreply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_ROPENREPLY))
return;
- DBUG_ON(ch->remote_msgqueue_pa == 0);
-
ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
dev_info(xpc_chan, "channel %d to partition %d connected\n",
@@ -600,99 +73,6 @@
}
/*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
-{
- struct xpc_notify *notify;
- u8 notify_type;
- s64 get = ch->w_remote_GP.get - 1;
-
- while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
- notify = &ch->notify_queue[get % ch->local_nentries];
-
- /*
- * See if the notify entry indicates it was associated with
- * a message who's sender wants to be notified. It is possible
- * that it is, but someone else is doing or has done the
- * notification.
- */
- notify_type = notify->type;
- if (notify_type == 0 ||
- cmpxchg(¬ify->type, notify_type, 0) != notify_type) {
- continue;
- }
-
- DBUG_ON(notify_type != XPC_N_CALL);
-
- atomic_dec(&ch->n_to_notify);
-
- if (notify->func != NULL) {
- dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n",
- (void *)notify, get, ch->partid, ch->number);
-
- notify->func(reason, ch->partid, ch->number,
- notify->key);
-
- dev_dbg(xpc_chan, "notify->func() returned, "
- "notify=0x%p, msg_number=%ld, partid=%d, "
- "channel=%d\n", (void *)notify, get,
- ch->partid, ch->number);
- }
- }
-}
-
-/*
- * Free up message queues and other stuff that were allocated for the specified
- * channel.
- *
- * Note: ch->reason and ch->reason_line are left set for debugging purposes,
- * they're cleared when XPC_C_DISCONNECTED is cleared.
- */
-static void
-xpc_free_msgqueues(struct xpc_channel *ch)
-{
- DBUG_ON(!spin_is_locked(&ch->lock));
- DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
-
- ch->remote_msgqueue_pa = 0;
- ch->func = NULL;
- ch->key = NULL;
- ch->msg_size = 0;
- ch->local_nentries = 0;
- ch->remote_nentries = 0;
- ch->kthreads_assigned_limit = 0;
- ch->kthreads_idle_limit = 0;
-
- ch->local_GP->get = 0;
- ch->local_GP->put = 0;
- ch->remote_GP.get = 0;
- ch->remote_GP.put = 0;
- ch->w_local_GP.get = 0;
- ch->w_local_GP.put = 0;
- ch->w_remote_GP.get = 0;
- ch->w_remote_GP.put = 0;
- ch->next_msg_to_pull = 0;
-
- if (ch->flags & XPC_C_SETUP) {
- ch->flags &= ~XPC_C_SETUP;
-
- dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
- ch->flags, ch->partid, ch->number);
-
- kfree(ch->local_msgqueue_base);
- ch->local_msgqueue = NULL;
- kfree(ch->remote_msgqueue_base);
- ch->remote_msgqueue = NULL;
- kfree(ch->notify_queue);
- ch->notify_queue = NULL;
- }
-}
-
-/*
* spin_lock_irqsave() is expected to be held on entry.
*/
static void
@@ -717,9 +97,9 @@
DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
!(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
- if (part->act_state == XPC_P_DEACTIVATING) {
+ if (part->act_state == XPC_P_AS_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
- if (xpc_partition_engaged(1UL << ch->partid))
+ if (xpc_partition_engaged(ch->partid))
return;
} else {
@@ -731,7 +111,7 @@
if (!(ch->flags & XPC_C_CLOSEREPLY)) {
ch->flags |= XPC_C_CLOSEREPLY;
- xpc_IPI_send_closereply(ch, irq_flags);
+ xpc_send_chctl_closereply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -740,8 +120,8 @@
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
- /* >>> we do callout while holding ch->lock */
- xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+ /* we do callout while holding ch->lock, callout can't block */
+ xpc_notify_senders_of_disconnect(ch);
}
/* both sides are disconnected now */
@@ -752,10 +132,24 @@
spin_lock_irqsave(&ch->lock, *irq_flags);
}
- /* it's now safe to free the channel's message queues */
- xpc_free_msgqueues(ch);
+ DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
- /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+ /* it's now safe to free the channel's message queues */
+ xpc_teardown_msg_structures(ch);
+
+ ch->func = NULL;
+ ch->key = NULL;
+ ch->entry_size = 0;
+ ch->local_nentries = 0;
+ ch->remote_nentries = 0;
+ ch->kthreads_assigned_limit = 0;
+ ch->kthreads_idle_limit = 0;
+
+ /*
+ * Mark the channel disconnected and clear all other flags, including
+ * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
+ * not including XPC_C_WDISCONNECT (if it was set).
+ */
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
atomic_dec(&part->nchannels_active);
@@ -768,15 +162,15 @@
if (ch->flags & XPC_C_WDISCONNECT) {
/* we won't lose the CPU since we're holding ch->lock */
complete(&ch->wdisconnect_wait);
- } else if (ch->delayed_IPI_flags) {
- if (part->act_state != XPC_P_DEACTIVATING) {
- /* time to take action on any delayed IPI flags */
- spin_lock(&part->IPI_lock);
- XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
- ch->delayed_IPI_flags);
- spin_unlock(&part->IPI_lock);
+ } else if (ch->delayed_chctl_flags) {
+ if (part->act_state != XPC_P_AS_DEACTIVATING) {
+ /* time to take action on any delayed chctl flags */
+ spin_lock(&part->chctl_lock);
+ part->chctl.flags[ch->number] |=
+ ch->delayed_chctl_flags;
+ spin_unlock(&part->chctl_lock);
}
- ch->delayed_IPI_flags = 0;
+ ch->delayed_chctl_flags = 0;
}
}
@@ -784,8 +178,8 @@
* Process a change in the channel's remote connection state.
*/
static void
-xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
- u8 IPI_flags)
+xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
+ u8 chctl_flags)
{
unsigned long irq_flags;
struct xpc_openclose_args *args =
@@ -800,24 +194,24 @@
if ((ch->flags & XPC_C_DISCONNECTED) &&
(ch->flags & XPC_C_WDISCONNECT)) {
/*
- * Delay processing IPI flags until thread waiting disconnect
+ * Delay processing chctl flags until thread waiting disconnect
* has had a chance to see that the channel is disconnected.
*/
- ch->delayed_IPI_flags |= IPI_flags;
+ ch->delayed_chctl_flags |= chctl_flags;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
- if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
+ if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
- dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received "
+ dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received "
"from partid=%d, channel=%d\n", args->reason,
ch->partid, ch->number);
/*
* If RCLOSEREQUEST is set, we're probably waiting for
* RCLOSEREPLY. We should find it and a ROPENREQUEST packed
- * with this RCLOSEREQUEST in the IPI_flags.
+ * with this RCLOSEREQUEST in the chctl_flags.
*/
if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -826,8 +220,8 @@
DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY));
DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY);
- DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY));
- IPI_flags &= ~XPC_IPI_CLOSEREPLY;
+ DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY));
+ chctl_flags &= ~XPC_CHCTL_CLOSEREPLY;
ch->flags |= XPC_C_RCLOSEREPLY;
/* both sides have finished disconnecting */
@@ -837,17 +231,15 @@
}
if (ch->flags & XPC_C_DISCONNECTED) {
- if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
- if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
- ch_number) &
- XPC_IPI_OPENREQUEST)) {
+ if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) {
+ if (part->chctl.flags[ch_number] &
+ XPC_CHCTL_OPENREQUEST) {
- DBUG_ON(ch->delayed_IPI_flags != 0);
- spin_lock(&part->IPI_lock);
- XPC_SET_IPI_FLAGS(part->local_IPI_amo,
- ch_number,
- XPC_IPI_CLOSEREQUEST);
- spin_unlock(&part->IPI_lock);
+ DBUG_ON(ch->delayed_chctl_flags != 0);
+ spin_lock(&part->chctl_lock);
+ part->chctl.flags[ch_number] |=
+ XPC_CHCTL_CLOSEREQUEST;
+ spin_unlock(&part->chctl_lock);
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -860,7 +252,7 @@
ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
}
- IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY);
+ chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
/*
* The meaningful CLOSEREQUEST connection state fields are:
@@ -878,7 +270,7 @@
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
- DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+ DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -886,13 +278,13 @@
xpc_process_disconnect(ch, &irq_flags);
}
- if (IPI_flags & XPC_IPI_CLOSEREPLY) {
+ if (chctl_flags & XPC_CHCTL_CLOSEREPLY) {
- dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d,"
- " channel=%d\n", ch->partid, ch->number);
+ dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid="
+ "%d, channel=%d\n", ch->partid, ch->number);
if (ch->flags & XPC_C_DISCONNECTED) {
- DBUG_ON(part->act_state != XPC_P_DEACTIVATING);
+ DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -900,15 +292,14 @@
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
- if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
- & XPC_IPI_CLOSEREQUEST)) {
+ if (part->chctl.flags[ch_number] &
+ XPC_CHCTL_CLOSEREQUEST) {
- DBUG_ON(ch->delayed_IPI_flags != 0);
- spin_lock(&part->IPI_lock);
- XPC_SET_IPI_FLAGS(part->local_IPI_amo,
- ch_number,
- XPC_IPI_CLOSEREPLY);
- spin_unlock(&part->IPI_lock);
+ DBUG_ON(ch->delayed_chctl_flags != 0);
+ spin_lock(&part->chctl_lock);
+ part->chctl.flags[ch_number] |=
+ XPC_CHCTL_CLOSEREPLY;
+ spin_unlock(&part->chctl_lock);
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -922,21 +313,21 @@
}
}
- if (IPI_flags & XPC_IPI_OPENREQUEST) {
+ if (chctl_flags & XPC_CHCTL_OPENREQUEST) {
- dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, "
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, "
"local_nentries=%d) received from partid=%d, "
- "channel=%d\n", args->msg_size, args->local_nentries,
+ "channel=%d\n", args->entry_size, args->local_nentries,
ch->partid, ch->number);
- if (part->act_state == XPC_P_DEACTIVATING ||
+ if (part->act_state == XPC_P_AS_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
- ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
+ ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -947,10 +338,10 @@
/*
* The meaningful OPENREQUEST connection state fields are:
- * msg_size = size of channel's messages in bytes
+ * entry_size = size of channel's messages in bytes
* local_nentries = remote partition's local_nentries
*/
- if (args->msg_size == 0 || args->local_nentries == 0) {
+ if (args->entry_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -960,14 +351,14 @@
ch->remote_nentries = args->local_nentries;
if (ch->flags & XPC_C_OPENREQUEST) {
- if (args->msg_size != ch->msg_size) {
+ if (args->entry_size != ch->entry_size) {
XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
} else {
- ch->msg_size = args->msg_size;
+ ch->entry_size = args->entry_size;
XPC_SET_REASON(ch, 0, 0);
ch->flags &= ~XPC_C_DISCONNECTED;
@@ -978,13 +369,13 @@
xpc_process_connect(ch, &irq_flags);
}
- if (IPI_flags & XPC_IPI_OPENREPLY) {
+ if (chctl_flags & XPC_CHCTL_OPENREPLY) {
- dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, "
- "local_nentries=%d, remote_nentries=%d) received from "
- "partid=%d, channel=%d\n", args->local_msgqueue_pa,
- args->local_nentries, args->remote_nentries,
- ch->partid, ch->number);
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa="
+ "0x%lx, local_nentries=%d, remote_nentries=%d) "
+ "received from partid=%d, channel=%d\n",
+ args->local_msgqueue_pa, args->local_nentries,
+ args->remote_nentries, ch->partid, ch->number);
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1012,10 +403,10 @@
DBUG_ON(args->remote_nentries == 0);
ch->flags |= XPC_C_ROPENREPLY;
- ch->remote_msgqueue_pa = args->local_msgqueue_pa;
+ xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
if (args->local_nentries < ch->remote_nentries) {
- dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
"remote_nentries=%d, old remote_nentries=%d, "
"partid=%d, channel=%d\n",
args->local_nentries, ch->remote_nentries,
@@ -1024,7 +415,7 @@
ch->remote_nentries = args->local_nentries;
}
if (args->remote_nentries < ch->local_nentries) {
- dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
"local_nentries=%d, old local_nentries=%d, "
"partid=%d, channel=%d\n",
args->remote_nentries, ch->local_nentries,
@@ -1082,7 +473,7 @@
ch->local_nentries = registration->nentries;
if (ch->flags & XPC_C_ROPENREQUEST) {
- if (registration->msg_size != ch->msg_size) {
+ if (registration->entry_size != ch->entry_size) {
/* the local and remote sides aren't the same */
/*
@@ -1101,7 +492,7 @@
return xpUnequalMsgSizes;
}
} else {
- ch->msg_size = registration->msg_size;
+ ch->entry_size = registration->entry_size;
XPC_SET_REASON(ch, 0, 0);
ch->flags &= ~XPC_C_DISCONNECTED;
@@ -1114,7 +505,7 @@
/* initiate the connection */
ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
- xpc_IPI_send_openrequest(ch, &irq_flags);
+ xpc_send_chctl_openrequest(ch, &irq_flags);
xpc_process_connect(ch, &irq_flags);
@@ -1123,152 +514,16 @@
return xpSuccess;
}
-/*
- * Clear some of the msg flags in the local message queue.
- */
-static inline void
-xpc_clear_local_msgqueue_flags(struct xpc_channel *ch)
-{
- struct xpc_msg *msg;
- s64 get;
-
- get = ch->w_remote_GP.get;
- do {
- msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
- (get % ch->local_nentries) *
- ch->msg_size);
- msg->flags = 0;
- } while (++get < ch->remote_GP.get);
-}
-
-/*
- * Clear some of the msg flags in the remote message queue.
- */
-static inline void
-xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch)
-{
- struct xpc_msg *msg;
- s64 put;
-
- put = ch->w_remote_GP.put;
- do {
- msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
- (put % ch->remote_nentries) *
- ch->msg_size);
- msg->flags = 0;
- } while (++put < ch->remote_GP.put);
-}
-
-static void
-xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
-{
- struct xpc_channel *ch = &part->channels[ch_number];
- int nmsgs_sent;
-
- ch->remote_GP = part->remote_GPs[ch_number];
-
- /* See what, if anything, has changed for each connected channel */
-
- xpc_msgqueue_ref(ch);
-
- if (ch->w_remote_GP.get == ch->remote_GP.get &&
- ch->w_remote_GP.put == ch->remote_GP.put) {
- /* nothing changed since GPs were last pulled */
- xpc_msgqueue_deref(ch);
- return;
- }
-
- if (!(ch->flags & XPC_C_CONNECTED)) {
- xpc_msgqueue_deref(ch);
- return;
- }
-
- /*
- * First check to see if messages recently sent by us have been
- * received by the other side. (The remote GET value will have
- * changed since we last looked at it.)
- */
-
- if (ch->w_remote_GP.get != ch->remote_GP.get) {
-
- /*
- * We need to notify any senders that want to be notified
- * that their sent messages have been received by their
- * intended recipients. We need to do this before updating
- * w_remote_GP.get so that we don't allocate the same message
- * queue entries prematurely (see xpc_allocate_msg()).
- */
- if (atomic_read(&ch->n_to_notify) > 0) {
- /*
- * Notify senders that messages sent have been
- * received and delivered by the other side.
- */
- xpc_notify_senders(ch, xpMsgDelivered,
- ch->remote_GP.get);
- }
-
- /*
- * Clear msg->flags in previously sent messages, so that
- * they're ready for xpc_allocate_msg().
- */
- xpc_clear_local_msgqueue_flags(ch);
-
- ch->w_remote_GP.get = ch->remote_GP.get;
-
- dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
- "channel=%d\n", ch->w_remote_GP.get, ch->partid,
- ch->number);
-
- /*
- * If anyone was waiting for message queue entries to become
- * available, wake them up.
- */
- if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
- wake_up(&ch->msg_allocate_wq);
- }
-
- /*
- * Now check for newly sent messages by the other side. (The remote
- * PUT value will have changed since we last looked at it.)
- */
-
- if (ch->w_remote_GP.put != ch->remote_GP.put) {
- /*
- * Clear msg->flags in previously received messages, so that
- * they're ready for xpc_get_deliverable_msg().
- */
- xpc_clear_remote_msgqueue_flags(ch);
-
- ch->w_remote_GP.put = ch->remote_GP.put;
-
- dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
- "channel=%d\n", ch->w_remote_GP.put, ch->partid,
- ch->number);
-
- nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get;
- if (nmsgs_sent > 0) {
- dev_dbg(xpc_chan, "msgs waiting to be copied and "
- "delivered=%d, partid=%d, channel=%d\n",
- nmsgs_sent, ch->partid, ch->number);
-
- if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
- xpc_activate_kthreads(ch, nmsgs_sent);
- }
- }
-
- xpc_msgqueue_deref(ch);
-}
-
void
-xpc_process_channel_activity(struct xpc_partition *part)
+xpc_process_sent_chctl_flags(struct xpc_partition *part)
{
unsigned long irq_flags;
- u64 IPI_amo, IPI_flags;
+ union xpc_channel_ctl_flags chctl;
struct xpc_channel *ch;
int ch_number;
u32 ch_flags;
- IPI_amo = xpc_get_IPI_flags(part);
+ chctl.all_flags = xpc_get_chctl_all_flags(part);
/*
* Initiate channel connections for registered channels.
@@ -1281,14 +536,14 @@
ch = &part->channels[ch_number];
/*
- * Process any open or close related IPI flags, and then deal
+ * Process any open or close related chctl flags, and then deal
* with connecting or disconnecting the channel as required.
*/
- IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number);
-
- if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags))
- xpc_process_openclose_IPI(part, ch_number, IPI_flags);
+ if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) {
+ xpc_process_openclose_chctl_flags(part, ch_number,
+ chctl.flags[ch_number]);
+ }
ch_flags = ch->flags; /* need an atomic snapshot of flags */
@@ -1299,7 +554,7 @@
continue;
}
- if (part->act_state == XPC_P_DEACTIVATING)
+ if (part->act_state == XPC_P_AS_DEACTIVATING)
continue;
if (!(ch_flags & XPC_C_CONNECTED)) {
@@ -1315,13 +570,13 @@
}
/*
- * Process any message related IPI flags, this may involve the
- * activation of kthreads to deliver any pending messages sent
- * from the other partition.
+ * Process any message related chctl flags, this may involve
+ * the activation of kthreads to deliver any pending messages
+ * sent from the other partition.
*/
- if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags))
- xpc_process_msg_IPI(part, ch_number);
+ if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+ xpc_process_msg_chctl_flags(part, ch_number);
}
}
@@ -1369,59 +624,6 @@
}
/*
- * Teardown the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-void
-xpc_teardown_infrastructure(struct xpc_partition *part)
-{
- short partid = XPC_PARTID(part);
-
- /*
- * We start off by making this partition inaccessible to local
- * processes by marking it as no longer setup. Then we make it
- * inaccessible to remote processes by clearing the XPC per partition
- * specific variable's magic # (which indicates that these variables
- * are no longer valid) and by ignoring all XPC notify IPIs sent to
- * this partition.
- */
-
- DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
- DBUG_ON(atomic_read(&part->nchannels_active) != 0);
- DBUG_ON(part->setup_state != XPC_P_SETUP);
- part->setup_state = XPC_P_WTEARDOWN;
-
- xpc_vars_part[partid].magic = 0;
-
- free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
-
- /*
- * Before proceeding with the teardown we have to wait until all
- * existing references cease.
- */
- wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
-
- /* now we can begin tearing down the infrastructure */
-
- part->setup_state = XPC_P_TORNDOWN;
-
- /* in case we've still got outstanding timers registered... */
- del_timer_sync(&part->dropped_IPI_timer);
-
- kfree(part->remote_openclose_args_base);
- part->remote_openclose_args = NULL;
- kfree(part->local_openclose_args_base);
- part->local_openclose_args = NULL;
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->channels);
- part->channels = NULL;
- part->local_IPI_amo_va = NULL;
-}
-
-/*
* Called by XP at the time of channel connection registration to cause
* XPC to establish connections to all currently active partitions.
*/
@@ -1432,9 +634,9 @@
struct xpc_partition *part;
struct xpc_channel *ch;
- DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+ DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_part_ref(part)) {
@@ -1488,10 +690,10 @@
struct xpc_partition *part;
struct xpc_channel *ch;
- DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+ DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
/* initiate the channel disconnect for every active partition */
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_part_ref(part)) {
@@ -1550,7 +752,7 @@
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- xpc_IPI_send_closerequest(ch, irq_flags);
+ xpc_send_chctl_closerequest(ch, irq_flags);
if (channel_was_connected)
ch->flags |= XPC_C_WASCONNECTED;
@@ -1598,7 +800,7 @@
* Wait for a message entry to become available for the specified channel,
* but don't wait any longer than 1 jiffy.
*/
-static enum xp_retval
+enum xp_retval
xpc_allocate_msg_wait(struct xpc_channel *ch)
{
enum xp_retval ret;
@@ -1625,315 +827,54 @@
}
/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel.
- */
-static enum xp_retval
-xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
- struct xpc_msg **address_of_msg)
-{
- struct xpc_msg *msg;
- enum xp_retval ret;
- s64 put;
-
- /* this reference will be dropped in xpc_send_msg() */
- xpc_msgqueue_ref(ch);
-
- if (ch->flags & XPC_C_DISCONNECTING) {
- xpc_msgqueue_deref(ch);
- return ch->reason;
- }
- if (!(ch->flags & XPC_C_CONNECTED)) {
- xpc_msgqueue_deref(ch);
- return xpNotConnected;
- }
-
- /*
- * Get the next available message entry from the local message queue.
- * If none are available, we'll make sure that we grab the latest
- * GP values.
- */
- ret = xpTimeout;
-
- while (1) {
-
- put = ch->w_local_GP.put;
- rmb(); /* guarantee that .put loads before .get */
- if (put - ch->w_remote_GP.get < ch->local_nentries) {
-
- /* There are available message entries. We need to try
- * to secure one for ourselves. We'll do this by trying
- * to increment w_local_GP.put as long as someone else
- * doesn't beat us to it. If they do, we'll have to
- * try again.
- */
- if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) {
- /* we got the entry referenced by put */
- break;
- }
- continue; /* try again */
- }
-
- /*
- * There aren't any available msg entries at this time.
- *
- * In waiting for a message entry to become available,
- * we set a timeout in case the other side is not
- * sending completion IPIs. This lets us fake an IPI
- * that will cause the IPI handler to fetch the latest
- * GP values as if an IPI was sent by the other side.
- */
- if (ret == xpTimeout)
- xpc_IPI_send_local_msgrequest(ch);
-
- if (flags & XPC_NOWAIT) {
- xpc_msgqueue_deref(ch);
- return xpNoWait;
- }
-
- ret = xpc_allocate_msg_wait(ch);
- if (ret != xpInterrupted && ret != xpTimeout) {
- xpc_msgqueue_deref(ch);
- return ret;
- }
- }
-
- /* get the message's address and initialize it */
- msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
- (put % ch->local_nentries) * ch->msg_size);
-
- DBUG_ON(msg->flags != 0);
- msg->number = put;
-
- dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n", put + 1,
- (void *)msg, msg->number, ch->partid, ch->number);
-
- *address_of_msg = msg;
-
- return xpSuccess;
-}
-
-/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel. NOTE that this routine can sleep waiting for a message
- * entry to become available. To not sleep, pass in the XPC_NOWAIT flag.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
*
- * Arguments:
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
*
- * partid - ID of partition to which the channel is connected.
- * ch_number - channel #.
- * flags - see xpc.h for valid flags.
- * payload - address of the allocated payload area pointer (filled in on
- * return) in which the user-defined message is constructed.
- */
-enum xp_retval
-xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
- struct xpc_partition *part = &xpc_partitions[partid];
- enum xp_retval ret = xpUnknownReason;
- struct xpc_msg *msg = NULL;
-
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
- DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-
- *payload = NULL;
-
- if (xpc_part_ref(part)) {
- ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg);
- xpc_part_deref(part);
-
- if (msg != NULL)
- *payload = &msg->payload;
- }
-
- return ret;
-}
-
-/*
- * Now we actually send the messages that are ready to be sent by advancing
- * the local message queue's Put value and then send an IPI to the recipient
- * partition.
- */
-static void
-xpc_send_msgs(struct xpc_channel *ch, s64 initial_put)
-{
- struct xpc_msg *msg;
- s64 put = initial_put + 1;
- int send_IPI = 0;
-
- while (1) {
-
- while (1) {
- if (put == ch->w_local_GP.put)
- break;
-
- msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
- (put % ch->local_nentries) *
- ch->msg_size);
-
- if (!(msg->flags & XPC_M_READY))
- break;
-
- put++;
- }
-
- if (put == initial_put) {
- /* nothing's changed */
- break;
- }
-
- if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) !=
- initial_put) {
- /* someone else beat us to it */
- DBUG_ON(ch->local_GP->put < initial_put);
- break;
- }
-
- /* we just set the new value of local_GP->put */
-
- dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
- "channel=%d\n", put, ch->partid, ch->number);
-
- send_IPI = 1;
-
- /*
- * We need to ensure that the message referenced by
- * local_GP->put is not XPC_M_READY or that local_GP->put
- * equals w_local_GP.put, so we'll go have a look.
- */
- initial_put = put;
- }
-
- if (send_IPI)
- xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Common code that does the actual sending of the message by advancing the
- * local message queue's Put value and sends an IPI to the partition the
- * message is being sent to.
- */
-static enum xp_retval
-xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
- xpc_notify_func func, void *key)
-{
- enum xp_retval ret = xpSuccess;
- struct xpc_notify *notify = notify;
- s64 put, msg_number = msg->number;
-
- DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
- DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) !=
- msg_number % ch->local_nentries);
- DBUG_ON(msg->flags & XPC_M_READY);
-
- if (ch->flags & XPC_C_DISCONNECTING) {
- /* drop the reference grabbed in xpc_allocate_msg() */
- xpc_msgqueue_deref(ch);
- return ch->reason;
- }
-
- if (notify_type != 0) {
- /*
- * Tell the remote side to send an ACK interrupt when the
- * message has been delivered.
- */
- msg->flags |= XPC_M_INTERRUPT;
-
- atomic_inc(&ch->n_to_notify);
-
- notify = &ch->notify_queue[msg_number % ch->local_nentries];
- notify->func = func;
- notify->key = key;
- notify->type = notify_type;
-
- /* >>> is a mb() needed here? */
-
- if (ch->flags & XPC_C_DISCONNECTING) {
- /*
- * An error occurred between our last error check and
- * this one. We will try to clear the type field from
- * the notify entry. If we succeed then
- * xpc_disconnect_channel() didn't already process
- * the notify entry.
- */
- if (cmpxchg(¬ify->type, notify_type, 0) ==
- notify_type) {
- atomic_dec(&ch->n_to_notify);
- ret = ch->reason;
- }
-
- /* drop the reference grabbed in xpc_allocate_msg() */
- xpc_msgqueue_deref(ch);
- return ret;
- }
- }
-
- msg->flags |= XPC_M_READY;
-
- /*
- * The preceding store of msg->flags must occur before the following
- * load of ch->local_GP->put.
- */
- mb();
-
- /* see if the message is next in line to be sent, if so send it */
-
- put = ch->local_GP->put;
- if (put == msg_number)
- xpc_send_msgs(ch, put);
-
- /* drop the reference grabbed in xpc_allocate_msg() */
- xpc_msgqueue_deref(ch);
- return ret;
-}
-
-/*
- * Send a message previously allocated using xpc_initiate_allocate() on the
- * specified channel connected to the specified partition.
- *
- * This routine will not wait for the message to be received, nor will
- * notification be given when it does happen. Once this routine has returned
- * the message entry allocated via xpc_initiate_allocate() is no longer
- * accessable to the caller.
- *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
+ * Once sent, this routine will not wait for the message to be received, nor
+ * will notification be given when it does happen.
*
* Arguments:
*
* partid - ID of partition to which the channel is connected.
* ch_number - channel # to send message on.
- * payload - pointer to the payload area allocated via
- * xpc_initiate_allocate().
+ * flags - see xp.h for valid flags.
+ * payload - pointer to the payload which is to be sent.
+ * payload_size - size of the payload in bytes.
*/
enum xp_retval
-xpc_initiate_send(short partid, int ch_number, void *payload)
+xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
+ u16 payload_size)
{
struct xpc_partition *part = &xpc_partitions[partid];
- struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xp_retval ret;
+ enum xp_retval ret = xpUnknownReason;
- dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+ dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
partid, ch_number);
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
- DBUG_ON(msg == NULL);
+ DBUG_ON(payload == NULL);
- ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL);
+ if (xpc_part_ref(part)) {
+ ret = xpc_send_payload(&part->channels[ch_number], flags,
+ payload, payload_size, 0, NULL, NULL);
+ xpc_part_deref(part);
+ }
return ret;
}
/*
- * Send a message previously allocated using xpc_initiate_allocate on the
- * specified channel connected to the specified partition.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
*
- * This routine will not wait for the message to be sent. Once this routine
- * has returned the message entry allocated via xpc_initiate_allocate() is no
- * longer accessable to the caller.
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
+ *
+ * This routine will not wait for the message to be sent or received.
*
* Once the remote end of the channel has received the message, the function
* passed as an argument to xpc_initiate_send_notify() will be called. This
@@ -1943,158 +884,51 @@
*
* If this routine returns an error, the caller's function will NOT be called.
*
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
- *
* Arguments:
*
* partid - ID of partition to which the channel is connected.
* ch_number - channel # to send message on.
- * payload - pointer to the payload area allocated via
- * xpc_initiate_allocate().
+ * flags - see xp.h for valid flags.
+ * payload - pointer to the payload which is to be sent.
+ * payload_size - size of the payload in bytes.
* func - function to call with asynchronous notification of message
* receipt. THIS FUNCTION MUST BE NON-BLOCKING.
* key - user-defined key to be passed to the function when it's called.
*/
enum xp_retval
-xpc_initiate_send_notify(short partid, int ch_number, void *payload,
- xpc_notify_func func, void *key)
+xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
+ u16 payload_size, xpc_notify_func func, void *key)
{
struct xpc_partition *part = &xpc_partitions[partid];
- struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xp_retval ret;
+ enum xp_retval ret = xpUnknownReason;
- dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+ dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
partid, ch_number);
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
- DBUG_ON(msg == NULL);
+ DBUG_ON(payload == NULL);
DBUG_ON(func == NULL);
- ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL,
- func, key);
+ if (xpc_part_ref(part)) {
+ ret = xpc_send_payload(&part->channels[ch_number], flags,
+ payload, payload_size, XPC_N_CALL, func,
+ key);
+ xpc_part_deref(part);
+ }
return ret;
}
-static struct xpc_msg *
-xpc_pull_remote_msg(struct xpc_channel *ch, s64 get)
-{
- struct xpc_partition *part = &xpc_partitions[ch->partid];
- struct xpc_msg *remote_msg, *msg;
- u32 msg_index, nmsgs;
- u64 msg_offset;
- enum xp_retval ret;
-
- if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
- /* we were interrupted by a signal */
- return NULL;
- }
-
- while (get >= ch->next_msg_to_pull) {
-
- /* pull as many messages as are ready and able to be pulled */
-
- msg_index = ch->next_msg_to_pull % ch->remote_nentries;
-
- DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put);
- nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull;
- if (msg_index + nmsgs > ch->remote_nentries) {
- /* ignore the ones that wrap the msg queue for now */
- nmsgs = ch->remote_nentries - msg_index;
- }
-
- msg_offset = msg_index * ch->msg_size;
- msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
- remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa +
- msg_offset);
-
- ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
- nmsgs * ch->msg_size);
- if (ret != xpSuccess) {
-
- dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
- " msg %ld from partition %d, channel=%d, "
- "ret=%d\n", nmsgs, ch->next_msg_to_pull,
- ch->partid, ch->number, ret);
-
- XPC_DEACTIVATE_PARTITION(part, ret);
-
- mutex_unlock(&ch->msg_to_pull_mutex);
- return NULL;
- }
-
- ch->next_msg_to_pull += nmsgs;
- }
-
- mutex_unlock(&ch->msg_to_pull_mutex);
-
- /* return the message we were looking for */
- msg_offset = (get % ch->remote_nentries) * ch->msg_size;
- msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-
- return msg;
-}
-
/*
- * Get a message to be delivered.
- */
-static struct xpc_msg *
-xpc_get_deliverable_msg(struct xpc_channel *ch)
-{
- struct xpc_msg *msg = NULL;
- s64 get;
-
- do {
- if (ch->flags & XPC_C_DISCONNECTING)
- break;
-
- get = ch->w_local_GP.get;
- rmb(); /* guarantee that .get loads before .put */
- if (get == ch->w_remote_GP.put)
- break;
-
- /* There are messages waiting to be pulled and delivered.
- * We need to try to secure one for ourselves. We'll do this
- * by trying to increment w_local_GP.get and hope that no one
- * else beats us to it. If they do, we'll we'll simply have
- * to try again for the next one.
- */
-
- if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) {
- /* we got the entry referenced by get */
-
- dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
- "partid=%d, channel=%d\n", get + 1,
- ch->partid, ch->number);
-
- /* pull the message from the remote partition */
-
- msg = xpc_pull_remote_msg(ch, get);
-
- DBUG_ON(msg != NULL && msg->number != get);
- DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE));
- DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY));
-
- break;
- }
-
- } while (1);
-
- return msg;
-}
-
-/*
- * Deliver a message to its intended recipient.
+ * Deliver a message's payload to its intended recipient.
*/
void
-xpc_deliver_msg(struct xpc_channel *ch)
+xpc_deliver_payload(struct xpc_channel *ch)
{
- struct xpc_msg *msg;
+ void *payload;
- msg = xpc_get_deliverable_msg(ch);
- if (msg != NULL) {
+ payload = xpc_get_deliverable_payload(ch);
+ if (payload != NULL) {
/*
* This ref is taken to protect the payload itself from being
@@ -2106,18 +940,16 @@
atomic_inc(&ch->kthreads_active);
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n",
- (void *)msg, msg->number, ch->partid,
+ dev_dbg(xpc_chan, "ch->func() called, payload=0x%p "
+ "partid=%d channel=%d\n", payload, ch->partid,
ch->number);
/* deliver the message to its intended recipient */
- ch->func(xpMsgReceived, ch->partid, ch->number,
- &msg->payload, ch->key);
+ ch->func(xpMsgReceived, ch->partid, ch->number, payload,
+ ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n",
- (void *)msg, msg->number, ch->partid,
+ dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p "
+ "partid=%d channel=%d\n", payload, ch->partid,
ch->number);
}
@@ -2126,118 +958,31 @@
}
/*
- * Now we actually acknowledge the messages that have been delivered and ack'd
- * by advancing the cached remote message queue's Get value and if requested
- * send an IPI to the message sender's partition.
- */
-static void
-xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
-{
- struct xpc_msg *msg;
- s64 get = initial_get + 1;
- int send_IPI = 0;
-
- while (1) {
-
- while (1) {
- if (get == ch->w_local_GP.get)
- break;
-
- msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
- (get % ch->remote_nentries) *
- ch->msg_size);
-
- if (!(msg->flags & XPC_M_DONE))
- break;
-
- msg_flags |= msg->flags;
- get++;
- }
-
- if (get == initial_get) {
- /* nothing's changed */
- break;
- }
-
- if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) !=
- initial_get) {
- /* someone else beat us to it */
- DBUG_ON(ch->local_GP->get <= initial_get);
- break;
- }
-
- /* we just set the new value of local_GP->get */
-
- dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
- "channel=%d\n", get, ch->partid, ch->number);
-
- send_IPI = (msg_flags & XPC_M_INTERRUPT);
-
- /*
- * We need to ensure that the message referenced by
- * local_GP->get is not XPC_M_DONE or that local_GP->get
- * equals w_local_GP.get, so we'll go have a look.
- */
- initial_get = get;
- }
-
- if (send_IPI)
- xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Acknowledge receipt of a delivered message.
- *
- * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition
- * that sent the message.
+ * Acknowledge receipt of a delivered message's payload.
*
* This function, although called by users, does not call xpc_part_ref() to
* ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg().
+ * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload().
*
* Arguments:
*
* partid - ID of partition to which the channel is connected.
* ch_number - channel # message received on.
* payload - pointer to the payload area allocated via
- * xpc_initiate_allocate().
+ * xpc_initiate_send() or xpc_initiate_send_notify().
*/
void
xpc_initiate_received(short partid, int ch_number, void *payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
- struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- s64 get, msg_number = msg->number;
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
+ xpc_received_payload(ch, payload);
- dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
- (void *)msg, msg_number, ch->partid, ch->number);
-
- DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) !=
- msg_number % ch->remote_nentries);
- DBUG_ON(msg->flags & XPC_M_DONE);
-
- msg->flags |= XPC_M_DONE;
-
- /*
- * The preceding store of msg->flags must occur before the following
- * load of ch->local_GP->get.
- */
- mb();
-
- /*
- * See if this message is next in line to be acknowledged as having
- * been delivered.
- */
- get = ch->local_GP->get;
- if (get == msg_number)
- xpc_acknowledge_msgs(ch, get, msg->flags);
-
- /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg() */
+ /* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */
xpc_msgqueue_deref(ch);
}
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index c3b4227..46325fc 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -25,37 +25,31 @@
*
* Caveats:
*
- * . We currently have no way to determine which nasid an IPI came
- * from. Thus, xpc_IPI_send() does a remote AMO write followed by
- * an IPI. The AMO indicates where data is to be pulled from, so
- * after the IPI arrives, the remote partition checks the AMO word.
- * The IPI can actually arrive before the AMO however, so other code
- * must periodically check for this case. Also, remote AMO operations
- * do not reliably time out. Thus we do a remote PIO read solely to
- * know whether the remote partition is down and whether we should
- * stop sending IPIs to it. This remote PIO read operation is set up
- * in a special nofault region so SAL knows to ignore (and cleanup)
- * any errors due to the remote AMO write, PIO read, and/or PIO
- * write operations.
+ * . Currently on sn2, we have no way to determine which nasid an IRQ
+ * came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
+ * followed by an IPI. The amo indicates where data is to be pulled
+ * from, so after the IPI arrives, the remote partition checks the amo
+ * word. The IPI can actually arrive before the amo however, so other
+ * code must periodically check for this case. Also, remote amo
+ * operations do not reliably time out. Thus we do a remote PIO read
+ * solely to know whether the remote partition is down and whether we
+ * should stop sending IPIs to it. This remote PIO read operation is
+ * set up in a special nofault region so SAL knows to ignore (and
+ * cleanup) any errors due to the remote amo write, PIO read, and/or
+ * PIO write operations.
*
* If/when new hardware solves this IPI problem, we should abandon
* the current approach.
*
*/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
#include <linux/delay.h>
#include <linux/reboot.h>
-#include <linux/completion.h>
#include <linux/kdebug.h>
#include <linux/kthread.h>
-#include <linux/uaccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
#include "xpc.h"
/* define two XPC debug device structures to be used with dev_dbg() et al */
@@ -89,9 +83,9 @@
static int xpc_hb_check_min_interval = 10;
static int xpc_hb_check_max_interval = 120;
-int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
-static int xpc_disengage_request_min_timelimit; /* = 0 */
-static int xpc_disengage_request_max_timelimit = 120;
+int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
+static int xpc_disengage_min_timelimit; /* = 0 */
+static int xpc_disengage_max_timelimit = 120;
static ctl_table xpc_sys_xpc_hb_dir[] = {
{
@@ -124,14 +118,14 @@
.child = xpc_sys_xpc_hb_dir},
{
.ctl_name = CTL_UNNUMBERED,
- .procname = "disengage_request_timelimit",
- .data = &xpc_disengage_request_timelimit,
+ .procname = "disengage_timelimit",
+ .data = &xpc_disengage_timelimit,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
- .extra1 = &xpc_disengage_request_min_timelimit,
- .extra2 = &xpc_disengage_request_max_timelimit},
+ .extra1 = &xpc_disengage_min_timelimit,
+ .extra2 = &xpc_disengage_max_timelimit},
{}
};
static ctl_table xpc_sys_dir[] = {
@@ -144,16 +138,19 @@
};
static struct ctl_table_header *xpc_sysctl;
-/* non-zero if any remote partition disengage request was timed out */
-int xpc_disengage_request_timedout;
+/* non-zero if any remote partition disengage was timed out */
+int xpc_disengage_timedout;
-/* #of IRQs received */
-static atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received and not yet processed */
+int xpc_activate_IRQ_rcvd;
+DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
/* IRQ handler notifies this wait queue on receipt of an IRQ */
-static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
static unsigned long xpc_hb_check_timeout;
+static struct timer_list xpc_hb_timer;
+void *xpc_heartbeating_to_mask;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -161,8 +158,6 @@
/* notification that the xpc_discovery thread has exited */
static DECLARE_COMPLETION(xpc_discovery_exited);
-static struct timer_list xpc_hb_timer;
-
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
@@ -175,31 +170,76 @@
.notifier_call = xpc_system_die,
};
+int (*xpc_setup_partitions_sn) (void);
+enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
+ unsigned long *rp_pa,
+ size_t *len);
+int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+void (*xpc_heartbeat_init) (void);
+void (*xpc_heartbeat_exit) (void);
+void (*xpc_increment_heartbeat) (void);
+void (*xpc_offline_heartbeat) (void);
+void (*xpc_online_heartbeat) (void);
+enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
+
+enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
+void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
+u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
+enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
+void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
+void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
+int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
+void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
+
+void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
+ unsigned long remote_rp_pa,
+ int nasid);
+void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
+void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
+void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
+
+void (*xpc_process_activate_IRQ_rcvd) (void);
+enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
+void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
+
+void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
+int (*xpc_partition_engaged) (short partid);
+int (*xpc_any_partition_engaged) (void);
+void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
+void (*xpc_assume_partition_disengaged) (short partid);
+
+void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
+ unsigned long *irq_flags);
+void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
+ unsigned long *irq_flags);
+void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
+ unsigned long *irq_flags);
+void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
+ unsigned long *irq_flags);
+
+void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
+ unsigned long msgqueue_pa);
+
+enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
+ void *payload, u16 payload_size,
+ u8 notify_type, xpc_notify_func func,
+ void *key);
+void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+
/*
- * Timer function to enforce the timelimit on the partition disengage request.
+ * Timer function to enforce the timelimit on the partition disengage.
*/
static void
-xpc_timeout_partition_disengage_request(unsigned long data)
+xpc_timeout_partition_disengage(unsigned long data)
{
struct xpc_partition *part = (struct xpc_partition *)data;
- DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
+ DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
(void)xpc_partition_disengaged(part);
- DBUG_ON(part->disengage_request_timeout != 0);
- DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
-}
-
-/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
- atomic_inc(&xpc_act_IRQ_rcvd);
- wake_up_interruptible(&xpc_act_IRQ_wq);
- return IRQ_HANDLED;
+ DBUG_ON(part->disengage_timeout != 0);
+ DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
}
/*
@@ -210,15 +250,63 @@
static void
xpc_hb_beater(unsigned long dummy)
{
- xpc_vars->heartbeat++;
+ xpc_increment_heartbeat();
- if (time_after_eq(jiffies, xpc_hb_check_timeout))
- wake_up_interruptible(&xpc_act_IRQ_wq);
+ if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
add_timer(&xpc_hb_timer);
}
+static void
+xpc_start_hb_beater(void)
+{
+ xpc_heartbeat_init();
+ init_timer(&xpc_hb_timer);
+ xpc_hb_timer.function = xpc_hb_beater;
+ xpc_hb_beater(0);
+}
+
+static void
+xpc_stop_hb_beater(void)
+{
+ del_timer_sync(&xpc_hb_timer);
+ xpc_heartbeat_exit();
+}
+
+/*
+ * At periodic intervals, scan through all active partitions and ensure
+ * their heartbeat is still active. If not, the partition is deactivated.
+ */
+static void
+xpc_check_remote_hb(void)
+{
+ struct xpc_partition *part;
+ short partid;
+ enum xp_retval ret;
+
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
+
+ if (xpc_exiting)
+ break;
+
+ if (partid == xp_partition_id)
+ continue;
+
+ part = &xpc_partitions[partid];
+
+ if (part->act_state == XPC_P_AS_INACTIVE ||
+ part->act_state == XPC_P_AS_DEACTIVATING) {
+ continue;
+ }
+
+ ret = xpc_get_remote_heartbeat(part);
+ if (ret != xpSuccess)
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ }
+}
+
/*
* This thread is responsible for nearly all of the partition
* activation/deactivation.
@@ -226,8 +314,6 @@
static int
xpc_hb_checker(void *ignore)
{
- int last_IRQ_count = 0;
- int new_IRQ_count;
int force_IRQ = 0;
/* this thread was marked active by xpc_hb_init() */
@@ -236,56 +322,49 @@
/* set our heartbeating to other partitions into motion */
xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
- xpc_hb_beater(0);
+ xpc_start_hb_beater();
while (!xpc_exiting) {
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int)(xpc_hb_check_timeout - jiffies),
- atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+ xpc_activate_IRQ_rcvd);
/* checking of remote heartbeats is skewed by IRQ handling */
- if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
+ if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
+ xpc_hb_check_timeout = jiffies +
+ (xpc_hb_check_interval * HZ);
+
dev_dbg(xpc_part, "checking remote heartbeats\n");
xpc_check_remote_hb();
/*
- * We need to periodically recheck to ensure no
- * IPI/AMO pairs have been missed. That check
- * must always reset xpc_hb_check_timeout.
+ * On sn2 we need to periodically recheck to ensure no
+ * IRQ/amo pairs have been missed.
*/
- force_IRQ = 1;
+ if (is_shub())
+ force_IRQ = 1;
}
/* check for outstanding IRQs */
- new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
- if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
+ if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
force_IRQ = 0;
-
- dev_dbg(xpc_part, "found an IRQ to process; will be "
- "resetting xpc_hb_check_timeout\n");
-
- last_IRQ_count += xpc_identify_act_IRQ_sender();
- if (last_IRQ_count < new_IRQ_count) {
- /* retry once to help avoid missing AMO */
- (void)xpc_identify_act_IRQ_sender();
- }
- last_IRQ_count = new_IRQ_count;
-
- xpc_hb_check_timeout = jiffies +
- (xpc_hb_check_interval * HZ);
+ dev_dbg(xpc_part, "processing activate IRQs "
+ "received\n");
+ xpc_process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
- (void)wait_event_interruptible(xpc_act_IRQ_wq,
- (last_IRQ_count <
- atomic_read(&xpc_act_IRQ_rcvd)
- || time_after_eq(jiffies,
- xpc_hb_check_timeout) ||
+ (void)wait_event_interruptible(xpc_activate_IRQ_wq,
+ (time_is_before_eq_jiffies(
+ xpc_hb_check_timeout) ||
+ xpc_activate_IRQ_rcvd > 0 ||
xpc_exiting));
}
+ xpc_stop_hb_beater();
+
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
/* mark this thread as having exited */
@@ -311,37 +390,8 @@
}
/*
- * Establish first contact with the remote partititon. This involves pulling
- * the XPC per partition variables from the remote partition and waiting for
- * the remote partition to pull ours.
- */
-static enum xp_retval
-xpc_make_first_contact(struct xpc_partition *part)
-{
- enum xp_retval ret;
-
- while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
- if (ret != xpRetry) {
- XPC_DEACTIVATE_PARTITION(part, ret);
- return ret;
- }
-
- dev_dbg(xpc_chan, "waiting to make first contact with "
- "partition %d\n", XPC_PARTID(part));
-
- /* wait a 1/4 of a second or so */
- (void)msleep_interruptible(250);
-
- if (part->act_state == XPC_P_DEACTIVATING)
- return part->reason;
- }
-
- return xpc_mark_partition_active(part);
-}
-
-/*
* The first kthread assigned to a newly activated partition is the one
- * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
+ * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
* that kthread until the partition is brought down, at which time that kthread
* returns back to XPC HB. (The return of that kthread will signify to XPC HB
* that XPC has dismantled all communication infrastructure for the associated
@@ -354,11 +404,11 @@
static void
xpc_channel_mgr(struct xpc_partition *part)
{
- while (part->act_state != XPC_P_DEACTIVATING ||
+ while (part->act_state != XPC_P_AS_DEACTIVATING ||
atomic_read(&part->nchannels_active) > 0 ||
!xpc_partition_disengaged(part)) {
- xpc_process_channel_activity(part);
+ xpc_process_sent_chctl_flags(part);
/*
* Wait until we've been requested to activate kthreads or
@@ -376,8 +426,8 @@
atomic_dec(&part->channel_mgr_requests);
(void)wait_event_interruptible(part->channel_mgr_wq,
(atomic_read(&part->channel_mgr_requests) > 0 ||
- part->local_IPI_amo != 0 ||
- (part->act_state == XPC_P_DEACTIVATING &&
+ part->chctl.all_flags != 0 ||
+ (part->act_state == XPC_P_AS_DEACTIVATING &&
atomic_read(&part->nchannels_active) == 0 &&
xpc_partition_disengaged(part))));
atomic_set(&part->channel_mgr_requests, 1);
@@ -385,47 +435,163 @@
}
/*
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
+ */
+void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+ /* see if kzalloc will give us cachline aligned memory by default */
+ *base = kzalloc(size, flags);
+ if (*base == NULL)
+ return NULL;
+
+ if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
+ return *base;
+
+ kfree(*base);
+
+ /* nope, we'll have to do it ourselves */
+ *base = kzalloc(size + L1_CACHE_BYTES, flags);
+ if (*base == NULL)
+ return NULL;
+
+ return (void *)L1_CACHE_ALIGN((u64)*base);
+}
+
+/*
+ * Setup the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static enum xp_retval
+xpc_setup_ch_structures(struct xpc_partition *part)
+{
+ enum xp_retval ret;
+ int ch_number;
+ struct xpc_channel *ch;
+ short partid = XPC_PARTID(part);
+
+ /*
+ * Allocate all of the channel structures as a contiguous chunk of
+ * memory.
+ */
+ DBUG_ON(part->channels != NULL);
+ part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
+ GFP_KERNEL);
+ if (part->channels == NULL) {
+ dev_err(xpc_chan, "can't get memory for channels\n");
+ return xpNoMemory;
+ }
+
+ /* allocate the remote open and close args */
+
+ part->remote_openclose_args =
+ xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+ GFP_KERNEL, &part->
+ remote_openclose_args_base);
+ if (part->remote_openclose_args == NULL) {
+ dev_err(xpc_chan, "can't get memory for remote connect args\n");
+ ret = xpNoMemory;
+ goto out_1;
+ }
+
+ part->chctl.all_flags = 0;
+ spin_lock_init(&part->chctl_lock);
+
+ atomic_set(&part->channel_mgr_requests, 1);
+ init_waitqueue_head(&part->channel_mgr_wq);
+
+ part->nchannels = XPC_MAX_NCHANNELS;
+
+ atomic_set(&part->nchannels_active, 0);
+ atomic_set(&part->nchannels_engaged, 0);
+
+ for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+ ch = &part->channels[ch_number];
+
+ ch->partid = partid;
+ ch->number = ch_number;
+ ch->flags = XPC_C_DISCONNECTED;
+
+ atomic_set(&ch->kthreads_assigned, 0);
+ atomic_set(&ch->kthreads_idle, 0);
+ atomic_set(&ch->kthreads_active, 0);
+
+ atomic_set(&ch->references, 0);
+ atomic_set(&ch->n_to_notify, 0);
+
+ spin_lock_init(&ch->lock);
+ init_completion(&ch->wdisconnect_wait);
+
+ atomic_set(&ch->n_on_msg_allocate_wq, 0);
+ init_waitqueue_head(&ch->msg_allocate_wq);
+ init_waitqueue_head(&ch->idle_wq);
+ }
+
+ ret = xpc_setup_ch_structures_sn(part);
+ if (ret != xpSuccess)
+ goto out_2;
+
+ /*
+ * With the setting of the partition setup_state to XPC_P_SS_SETUP,
+ * we're declaring that this partition is ready to go.
+ */
+ part->setup_state = XPC_P_SS_SETUP;
+
+ return xpSuccess;
+
+ /* setup of ch structures failed */
+out_2:
+ kfree(part->remote_openclose_args_base);
+ part->remote_openclose_args = NULL;
+out_1:
+ kfree(part->channels);
+ part->channels = NULL;
+ return ret;
+}
+
+/*
+ * Teardown the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static void
+xpc_teardown_ch_structures(struct xpc_partition *part)
+{
+ DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
+ DBUG_ON(atomic_read(&part->nchannels_active) != 0);
+
+ /*
+ * Make this partition inaccessible to local processes by marking it
+ * as no longer setup. Then wait before proceeding with the teardown
+ * until all existing references cease.
+ */
+ DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
+ part->setup_state = XPC_P_SS_WTEARDOWN;
+
+ wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
+
+ /* now we can begin tearing down the infrastructure */
+
+ xpc_teardown_ch_structures_sn(part);
+
+ kfree(part->remote_openclose_args_base);
+ part->remote_openclose_args = NULL;
+ kfree(part->channels);
+ part->channels = NULL;
+
+ part->setup_state = XPC_P_SS_TORNDOWN;
+}
+
+/*
* When XPC HB determines that a partition has come up, it will create a new
* kthread and that kthread will call this function to attempt to set up the
* basic infrastructure used for Cross Partition Communication with the newly
* upped partition.
*
* The kthread that was created by XPC HB and which setup the XPC
- * infrastructure will remain assigned to the partition until the partition
- * goes down. At which time the kthread will teardown the XPC infrastructure
- * and then exit.
- *
- * XPC HB will put the remote partition's XPC per partition specific variables
- * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
- * calling xpc_partition_up().
+ * infrastructure will remain assigned to the partition becoming the channel
+ * manager for that partition until the partition is deactivating, at which
+ * time the kthread will teardown the XPC infrastructure and then exit.
*/
-static void
-xpc_partition_up(struct xpc_partition *part)
-{
- DBUG_ON(part->channels != NULL);
-
- dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
-
- if (xpc_setup_infrastructure(part) != xpSuccess)
- return;
-
- /*
- * The kthread that XPC HB called us with will become the
- * channel manager for this partition. It will not return
- * back to XPC HB until the partition's XPC infrastructure
- * has been dismantled.
- */
-
- (void)xpc_part_ref(part); /* this will always succeed */
-
- if (xpc_make_first_contact(part) == xpSuccess)
- xpc_channel_mgr(part);
-
- xpc_part_deref(part);
-
- xpc_teardown_infrastructure(part);
-}
-
static int
xpc_activating(void *__partid)
{
@@ -433,64 +599,47 @@
struct xpc_partition *part = &xpc_partitions[partid];
unsigned long irq_flags;
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
spin_lock_irqsave(&part->act_lock, irq_flags);
- if (part->act_state == XPC_P_DEACTIVATING) {
- part->act_state = XPC_P_INACTIVE;
+ if (part->act_state == XPC_P_AS_DEACTIVATING) {
+ part->act_state = XPC_P_AS_INACTIVE;
spin_unlock_irqrestore(&part->act_lock, irq_flags);
part->remote_rp_pa = 0;
return 0;
}
/* indicate the thread is activating */
- DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
- part->act_state = XPC_P_ACTIVATING;
+ DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
+ part->act_state = XPC_P_AS_ACTIVATING;
XPC_SET_REASON(part, 0, 0);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- dev_dbg(xpc_part, "bringing partition %d up\n", partid);
+ dev_dbg(xpc_part, "activating partition %d\n", partid);
- /*
- * Register the remote partition's AMOs with SAL so it can handle
- * and cleanup errors within that address range should the remote
- * partition go down. We don't unregister this range because it is
- * difficult to tell when outstanding writes to the remote partition
- * are finished and thus when it is safe to unregister. This should
- * not result in wasted space in the SAL xp_addr_region table because
- * we should get the same page for remote_amos_page_pa after module
- * reloads and system reboots.
- */
- if (sn_register_xp_addr_region(part->remote_amos_page_pa,
- PAGE_SIZE, 1) < 0) {
- dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
- "xp_addr region\n", partid);
+ xpc_allow_hb(partid);
- spin_lock_irqsave(&part->act_lock, irq_flags);
- part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
- spin_unlock_irqrestore(&part->act_lock, irq_flags);
- part->remote_rp_pa = 0;
- return 0;
+ if (xpc_setup_ch_structures(part) == xpSuccess) {
+ (void)xpc_part_ref(part); /* this will always succeed */
+
+ if (xpc_make_first_contact(part) == xpSuccess) {
+ xpc_mark_partition_active(part);
+ xpc_channel_mgr(part);
+ /* won't return until partition is deactivating */
+ }
+
+ xpc_part_deref(part);
+ xpc_teardown_ch_structures(part);
}
- xpc_allow_hb(partid, xpc_vars);
- xpc_IPI_send_activated(part);
-
- /*
- * xpc_partition_up() holds this thread and marks this partition as
- * XPC_P_ACTIVE by calling xpc_hb_mark_active().
- */
- (void)xpc_partition_up(part);
-
- xpc_disallow_hb(partid, xpc_vars);
+ xpc_disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
- xpc_IPI_send_reactivate(part);
+ xpc_request_partition_reactivation(part);
}
return 0;
@@ -505,9 +654,9 @@
spin_lock_irqsave(&part->act_lock, irq_flags);
- DBUG_ON(part->act_state != XPC_P_INACTIVE);
+ DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
- part->act_state = XPC_P_ACTIVATION_REQ;
+ part->act_state = XPC_P_AS_ACTIVATION_REQ;
XPC_SET_REASON(part, xpCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -516,62 +665,12 @@
partid);
if (IS_ERR(kthread)) {
spin_lock_irqsave(&part->act_lock, irq_flags);
- part->act_state = XPC_P_INACTIVE;
+ part->act_state = XPC_P_AS_INACTIVE;
XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
}
}
-/*
- * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
- * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
- * than one partition, we use an AMO_t structure per partition to indicate
- * whether a partition has sent an IPI or not. If it has, then wake up the
- * associated kthread to handle it.
- *
- * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
- * running on other partitions.
- *
- * Noteworthy Arguments:
- *
- * irq - Interrupt ReQuest number. NOT USED.
- *
- * dev_id - partid of IPI's potential sender.
- */
-irqreturn_t
-xpc_notify_IRQ_handler(int irq, void *dev_id)
-{
- short partid = (short)(u64)dev_id;
- struct xpc_partition *part = &xpc_partitions[partid];
-
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-
- if (xpc_part_ref(part)) {
- xpc_check_for_channel_activity(part);
-
- xpc_part_deref(part);
- }
- return IRQ_HANDLED;
-}
-
-/*
- * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
- * because the write to their associated IPI amo completed after the IRQ/IPI
- * was received.
- */
-void
-xpc_dropped_IPI_check(struct xpc_partition *part)
-{
- if (xpc_part_ref(part)) {
- xpc_check_for_channel_activity(part);
-
- part->dropped_IPI_timer.expires = jiffies +
- XPC_P_DROPPED_IPI_WAIT;
- add_timer(&part->dropped_IPI_timer);
- xpc_part_deref(part);
- }
-}
-
void
xpc_activate_kthreads(struct xpc_channel *ch, int needed)
{
@@ -616,9 +715,9 @@
do {
/* deliver messages to their intended recipients */
- while (ch->w_local_GP.get < ch->w_remote_GP.put &&
+ while (xpc_n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
- xpc_deliver_msg(ch);
+ xpc_deliver_payload(ch);
}
if (atomic_inc_return(&ch->kthreads_idle) >
@@ -632,7 +731,7 @@
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
- (ch->w_local_GP.get < ch->w_remote_GP.put ||
+ (xpc_n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
@@ -677,7 +776,7 @@
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
- n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
+ n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
@@ -703,11 +802,9 @@
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
- if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
- if (atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_mark_partition_disengaged(part);
- xpc_IPI_send_disengage(part);
- }
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+ atomic_dec_return(&part->nchannels_engaged) == 0) {
+ xpc_indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
@@ -758,9 +855,9 @@
} else if (ch->flags & XPC_C_DISCONNECTING) {
break;
- } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
- if (atomic_inc_return(&part->nchannels_engaged) == 1)
- xpc_mark_partition_engaged(part);
+ } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+ atomic_inc_return(&part->nchannels_engaged) == 1) {
+ xpc_indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
@@ -782,8 +879,7 @@
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_mark_partition_disengaged(part);
- xpc_IPI_send_disengage(part);
+ xpc_indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
@@ -815,7 +911,7 @@
int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (!xpc_part_ref(part))
@@ -834,16 +930,15 @@
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
wakeup_channel_mgr = 0;
- if (ch->delayed_IPI_flags) {
- if (part->act_state != XPC_P_DEACTIVATING) {
- spin_lock(&part->IPI_lock);
- XPC_SET_IPI_FLAGS(part->local_IPI_amo,
- ch->number,
- ch->delayed_IPI_flags);
- spin_unlock(&part->IPI_lock);
+ if (ch->delayed_chctl_flags) {
+ if (part->act_state != XPC_P_AS_DEACTIVATING) {
+ spin_lock(&part->chctl_lock);
+ part->chctl.flags[ch->number] |=
+ ch->delayed_chctl_flags;
+ spin_unlock(&part->chctl_lock);
wakeup_channel_mgr = 1;
}
- ch->delayed_IPI_flags = 0;
+ ch->delayed_chctl_flags = 0;
}
ch->flags &= ~XPC_C_WDISCONNECT;
@@ -856,13 +951,63 @@
}
}
+static int
+xpc_setup_partitions(void)
+{
+ short partid;
+ struct xpc_partition *part;
+
+ xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
+ xp_max_npartitions, GFP_KERNEL);
+ if (xpc_partitions == NULL) {
+ dev_err(xpc_part, "can't get memory for partition structure\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * The first few fields of each entry of xpc_partitions[] need to
+ * be initialized now so that calls to xpc_connect() and
+ * xpc_disconnect() can be made prior to the activation of any remote
+ * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
+ * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
+ * PARTITION HAS BEEN ACTIVATED.
+ */
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
+ part = &xpc_partitions[partid];
+
+ DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
+
+ part->activate_IRQ_rcvd = 0;
+ spin_lock_init(&part->act_lock);
+ part->act_state = XPC_P_AS_INACTIVE;
+ XPC_SET_REASON(part, 0, 0);
+
+ init_timer(&part->disengage_timer);
+ part->disengage_timer.function =
+ xpc_timeout_partition_disengage;
+ part->disengage_timer.data = (unsigned long)part;
+
+ part->setup_state = XPC_P_SS_UNSET;
+ init_waitqueue_head(&part->teardown_wq);
+ atomic_set(&part->references, 0);
+ }
+
+ return xpc_setup_partitions_sn();
+}
+
+static void
+xpc_teardown_partitions(void)
+{
+ kfree(xpc_partitions);
+}
+
static void
xpc_do_exit(enum xp_retval reason)
{
short partid;
int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
- unsigned long printmsg_time, disengage_request_timeout = 0;
+ unsigned long printmsg_time, disengage_timeout = 0;
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
DBUG_ON(xpc_exiting == 1);
@@ -873,10 +1018,7 @@
* the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
- wake_up_interruptible(&xpc_act_IRQ_wq);
-
- /* ignore all incoming interrupts */
- free_irq(SGI_XPC_ACTIVATE, NULL);
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
/* wait for the discovery thread to exit */
wait_for_completion(&xpc_discovery_exited);
@@ -889,17 +1031,17 @@
/* wait for all partitions to become inactive */
- printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
- xpc_disengage_request_timedout = 0;
+ printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
+ xpc_disengage_timedout = 0;
do {
active_part_count = 0;
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
if (xpc_partition_disengaged(part) &&
- part->act_state == XPC_P_INACTIVE) {
+ part->act_state == XPC_P_AS_INACTIVE) {
continue;
}
@@ -907,36 +1049,32 @@
XPC_DEACTIVATE_PARTITION(part, reason);
- if (part->disengage_request_timeout >
- disengage_request_timeout) {
- disengage_request_timeout =
- part->disengage_request_timeout;
- }
+ if (part->disengage_timeout > disengage_timeout)
+ disengage_timeout = part->disengage_timeout;
}
- if (xpc_partition_engaged(-1UL)) {
- if (time_after(jiffies, printmsg_time)) {
+ if (xpc_any_partition_engaged()) {
+ if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
- "partitions to disengage, timeout in "
- "%ld seconds\n",
- (disengage_request_timeout - jiffies)
- / HZ);
+ "partitions to deactivate, timeout in "
+ "%ld seconds\n", (disengage_timeout -
+ jiffies) / HZ);
printmsg_time = jiffies +
- (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
printed_waiting_msg = 1;
}
} else if (active_part_count > 0) {
if (printed_waiting_msg) {
dev_info(xpc_part, "waiting for local partition"
- " to disengage\n");
+ " to deactivate\n");
printed_waiting_msg = 0;
}
} else {
- if (!xpc_disengage_request_timedout) {
+ if (!xpc_disengage_timedout) {
dev_info(xpc_part, "all partitions have "
- "disengaged\n");
+ "deactivated\n");
}
break;
}
@@ -946,33 +1084,28 @@
} while (1);
- DBUG_ON(xpc_partition_engaged(-1UL));
+ DBUG_ON(xpc_any_partition_engaged());
+ DBUG_ON(xpc_any_hbs_allowed() != 0);
- /* indicate to others that our reserved page is uninitialized */
- xpc_rsvd_page->vars_pa = 0;
-
- /* now it's time to eliminate our heartbeat */
- del_timer_sync(&xpc_hb_timer);
- DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+ xpc_teardown_rsvd_page();
if (reason == xpUnloading) {
- /* take ourselves off of the reboot_notifier_list */
- (void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
- /* take ourselves off of the die_notifier list */
(void)unregister_die_notifier(&xpc_die_notifier);
+ (void)unregister_reboot_notifier(&xpc_reboot_notifier);
}
- /* close down protections for IPI operations */
- xpc_restrict_IPI_ops();
-
/* clear the interface to XPC's functions */
xpc_clear_interface();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
- kfree(xpc_remote_copy_buffer_base);
+ xpc_teardown_partitions();
+
+ if (is_shub())
+ xpc_exit_sn2();
+ else
+ xpc_exit_uv();
}
/*
@@ -1002,60 +1135,57 @@
}
/*
- * Notify other partitions to disengage from all references to our memory.
+ * Notify other partitions to deactivate from us by first disengaging from all
+ * references to our memory.
*/
static void
-xpc_die_disengage(void)
+xpc_die_deactivate(void)
{
struct xpc_partition *part;
short partid;
- unsigned long engaged;
- long time, printmsg_time, disengage_request_timeout;
+ int any_engaged;
+ long keep_waiting;
+ long wait_to_print;
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
- xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */
+ xpc_disallow_all_hbs(); /*indicate we're deactivated */
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
- if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
- remote_vars_version)) {
-
- /* just in case it was left set by an earlier XPC */
- xpc_clear_partition_engaged(1UL << partid);
- continue;
- }
-
- if (xpc_partition_engaged(1UL << partid) ||
- part->act_state != XPC_P_INACTIVE) {
- xpc_request_partition_disengage(part);
- xpc_mark_partition_disengaged(part);
- xpc_IPI_send_disengage(part);
+ if (xpc_partition_engaged(partid) ||
+ part->act_state != XPC_P_AS_INACTIVE) {
+ xpc_request_partition_deactivation(part);
+ xpc_indicate_partition_disengaged(part);
}
}
- time = rtc_time();
- printmsg_time = time +
- (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
- disengage_request_timeout = time +
- (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
-
- /* wait for all other partitions to disengage from us */
+ /*
+ * Though we requested that all other partitions deactivate from us,
+ * we only wait until they've all disengaged or we've reached the
+ * defined timelimit.
+ *
+ * Given that one iteration through the following while-loop takes
+ * approximately 200 microseconds, calculate the #of loops to take
+ * before bailing and the #of loops before printing a waiting message.
+ */
+ keep_waiting = xpc_disengage_timelimit * 1000 * 5;
+ wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
- engaged = xpc_partition_engaged(-1UL);
- if (!engaged) {
- dev_info(xpc_part, "all partitions have disengaged\n");
+ any_engaged = xpc_any_partition_engaged();
+ if (!any_engaged) {
+ dev_info(xpc_part, "all partitions have deactivated\n");
break;
}
- time = rtc_time();
- if (time >= disengage_request_timeout) {
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
- if (engaged & (1UL << partid)) {
- dev_info(xpc_part, "disengage from "
+ if (!keep_waiting--) {
+ for (partid = 0; partid < xp_max_npartitions;
+ partid++) {
+ if (xpc_partition_engaged(partid)) {
+ dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
}
@@ -1063,15 +1193,15 @@
break;
}
- if (time >= printmsg_time) {
+ if (!wait_to_print--) {
dev_info(xpc_part, "waiting for remote partitions to "
- "disengage, timeout in %ld seconds\n",
- (disengage_request_timeout - time) /
- sn_rtc_cycles_per_second);
- printmsg_time = time +
- (XPC_DISENGAGE_PRINTMSG_INTERVAL *
- sn_rtc_cycles_per_second);
+ "deactivate, timeout in %ld seconds\n",
+ keep_waiting / (1000 * 5));
+ wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
+ 1000 * 5;
}
+
+ udelay(200);
}
}
@@ -1086,10 +1216,11 @@
static int
xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
{
+#ifdef CONFIG_IA64 /* !!! temporary kludge */
switch (event) {
case DIE_MACHINE_RESTART:
case DIE_MACHINE_HALT:
- xpc_die_disengage();
+ xpc_die_deactivate();
break;
case DIE_KDEBUG_ENTER:
@@ -1100,8 +1231,7 @@
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
- xpc_vars->heartbeat++;
- xpc_vars->heartbeat_offline = 1;
+ xpc_offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
@@ -1112,10 +1242,12 @@
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
- xpc_vars->heartbeat++;
- xpc_vars->heartbeat_offline = 0;
+ xpc_online_heartbeat();
break;
}
+#else
+ xpc_die_deactivate();
+#endif
return NOTIFY_DONE;
}
@@ -1124,105 +1256,52 @@
xpc_init(void)
{
int ret;
- short partid;
- struct xpc_partition *part;
struct task_struct *kthread;
- size_t buf_size;
-
- if (!ia64_platform_is("sn2"))
- return -ENODEV;
-
- buf_size = max(XPC_RP_VARS_SIZE,
- XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
- xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
- GFP_KERNEL,
- &xpc_remote_copy_buffer_base);
- if (xpc_remote_copy_buffer == NULL)
- return -ENOMEM;
snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
- xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+ if (is_shub()) {
+ /*
+ * The ia64-sn2 architecture supports at most 64 partitions.
+ * And the inability to unregister remote amos restricts us
+ * further to only support exactly 64 partitions on this
+ * architecture, no less.
+ */
+ if (xp_max_npartitions != 64) {
+ dev_err(xpc_part, "max #of partitions not set to 64\n");
+ ret = -EINVAL;
+ } else {
+ ret = xpc_init_sn2();
+ }
- /*
- * The first few fields of each entry of xpc_partitions[] need to
- * be initialized now so that calls to xpc_connect() and
- * xpc_disconnect() can be made prior to the activation of any remote
- * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
- * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
- * PARTITION HAS BEEN ACTIVATED.
- */
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
- part = &xpc_partitions[partid];
+ } else if (is_uv()) {
+ ret = xpc_init_uv();
- DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
-
- part->act_IRQ_rcvd = 0;
- spin_lock_init(&part->act_lock);
- part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, 0, 0);
-
- init_timer(&part->disengage_request_timer);
- part->disengage_request_timer.function =
- xpc_timeout_partition_disengage_request;
- part->disengage_request_timer.data = (unsigned long)part;
-
- part->setup_state = XPC_P_UNSET;
- init_waitqueue_head(&part->teardown_wq);
- atomic_set(&part->references, 0);
+ } else {
+ ret = -ENODEV;
}
- /*
- * Open up protections for IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
- xpc_allow_IPI_ops();
+ if (ret != 0)
+ return ret;
- /*
- * Interrupts being processed will increment this atomic variable and
- * awaken the heartbeat thread which will process the interrupts.
- */
- atomic_set(&xpc_act_IRQ_rcvd, 0);
-
- /*
- * This is safe to do before the xpc_hb_checker thread has started
- * because the handler releases a wait queue. If an interrupt is
- * received before the thread is waiting, it will not go to sleep,
- * but rather immediately process the interrupt.
- */
- ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
- "xpc hb", NULL);
+ ret = xpc_setup_partitions();
if (ret != 0) {
- dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
- "errno=%d\n", -ret);
-
- xpc_restrict_IPI_ops();
-
- if (xpc_sysctl)
- unregister_sysctl_table(xpc_sysctl);
-
- kfree(xpc_remote_copy_buffer_base);
- return -EBUSY;
+ dev_err(xpc_part, "can't get memory for partition structure\n");
+ goto out_1;
}
+ xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+
/*
* Fill the partition reserved page with the information needed by
* other partitions to discover we are alive and establish initial
* communications.
*/
- xpc_rsvd_page = xpc_rsvd_page_init();
- if (xpc_rsvd_page == NULL) {
- dev_err(xpc_part, "could not setup our reserved page\n");
-
- free_irq(SGI_XPC_ACTIVATE, NULL);
- xpc_restrict_IPI_ops();
-
- if (xpc_sysctl)
- unregister_sysctl_table(xpc_sysctl);
-
- kfree(xpc_remote_copy_buffer_base);
- return -EBUSY;
+ ret = xpc_setup_rsvd_page();
+ if (ret != 0) {
+ dev_err(xpc_part, "can't setup our reserved page\n");
+ goto out_2;
}
/* add ourselves to the reboot_notifier_list */
@@ -1235,9 +1314,6 @@
if (ret != 0)
dev_warn(xpc_part, "can't register die notifier\n");
- init_timer(&xpc_hb_timer);
- xpc_hb_timer.function = xpc_hb_beater;
-
/*
* The real work-horse behind xpc. This processes incoming
* interrupts and monitors remote heartbeats.
@@ -1245,25 +1321,8 @@
kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
if (IS_ERR(kthread)) {
dev_err(xpc_part, "failed while forking hb check thread\n");
-
- /* indicate to others that our reserved page is uninitialized */
- xpc_rsvd_page->vars_pa = 0;
-
- /* take ourselves off of the reboot_notifier_list */
- (void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
- /* take ourselves off of the die_notifier list */
- (void)unregister_die_notifier(&xpc_die_notifier);
-
- del_timer_sync(&xpc_hb_timer);
- free_irq(SGI_XPC_ACTIVATE, NULL);
- xpc_restrict_IPI_ops();
-
- if (xpc_sysctl)
- unregister_sysctl_table(xpc_sysctl);
-
- kfree(xpc_remote_copy_buffer_base);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out_3;
}
/*
@@ -1285,11 +1344,28 @@
/* set the interface to point at XPC's functions */
xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
- xpc_initiate_allocate, xpc_initiate_send,
- xpc_initiate_send_notify, xpc_initiate_received,
- xpc_initiate_partid_to_nasids);
+ xpc_initiate_send, xpc_initiate_send_notify,
+ xpc_initiate_received, xpc_initiate_partid_to_nasids);
return 0;
+
+ /* initialization was not successful */
+out_3:
+ xpc_teardown_rsvd_page();
+
+ (void)unregister_die_notifier(&xpc_die_notifier);
+ (void)unregister_reboot_notifier(&xpc_reboot_notifier);
+out_2:
+ if (xpc_sysctl)
+ unregister_sysctl_table(xpc_sysctl);
+
+ xpc_teardown_partitions();
+out_1:
+ if (is_shub())
+ xpc_exit_sn2();
+ else
+ xpc_exit_uv();
+ return ret;
}
module_init(xpc_init);
@@ -1314,9 +1390,9 @@
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
"heartbeat checks.");
-module_param(xpc_disengage_request_timelimit, int, 0);
-MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
- "for disengage request to complete.");
+module_param(xpc_disengage_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
+ "for disengage to complete.");
module_param(xpc_kdebug_ignore, int, 0);
MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 7dd4b58..6722f6f 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -15,57 +15,22 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <linux/cache.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <asm/uncached.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
#include "xpc.h"
/* XPC is exiting flag */
int xpc_exiting;
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
/* this partition's reserved page pointers */
struct xpc_rsvd_page *xpc_rsvd_page;
-static u64 *xpc_part_nasids;
-static u64 *xpc_mach_nasids;
-struct xpc_vars *xpc_vars;
-struct xpc_vars_part *xpc_vars_part;
+static unsigned long *xpc_part_nasids;
+unsigned long *xpc_mach_nasids;
-static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
-static int xp_nasid_mask_words; /* actual size in words of nasid mask */
+static int xpc_nasid_mask_nbytes; /* #of bytes in nasid mask */
+int xpc_nasid_mask_nlongs; /* #of longs in nasid mask */
-/*
- * For performance reasons, each entry of xpc_partitions[] is cacheline
- * aligned. And xpc_partitions[] is padded with an additional entry at the
- * end so that the last legitimate entry doesn't share its cacheline with
- * another variable.
- */
-struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-
-/*
- * Generic buffer used to store a local copy of portions of a remote
- * partition's reserved page (either its header and part_nasids mask,
- * or its vars).
- */
-char *xpc_remote_copy_buffer;
-void *xpc_remote_copy_buffer_base;
+struct xpc_partition *xpc_partitions;
/*
* Guarantee that the kmalloc'd memory is cacheline aligned.
@@ -95,56 +60,59 @@
* Given a nasid, get the physical address of the partition's reserved page
* for that nasid. This function returns 0 on any error.
*/
-static u64
+static unsigned long
xpc_get_rsvd_page_pa(int nasid)
{
- bte_result_t bte_res;
- s64 status;
+ enum xp_retval ret;
u64 cookie = 0;
- u64 rp_pa = nasid; /* seed with nasid */
- u64 len = 0;
- u64 buf = buf;
- u64 buf_len = 0;
+ unsigned long rp_pa = nasid; /* seed with nasid */
+ size_t len = 0;
+ size_t buf_len = 0;
+ void *buf = buf;
void *buf_base = NULL;
while (1) {
- status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa,
- &len);
+ /* !!! rp_pa will need to be _gpa on UV.
+ * ??? So do we save it into the architecture specific parts
+ * ??? of the xpc_partition structure? Do we rename this
+ * ??? function or have two versions? Rename rp_pa for UV to
+ * ??? rp_gpa?
+ */
+ ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
+ &len);
- dev_dbg(xpc_part, "SAL returned with status=%li, cookie="
- "0x%016lx, address=0x%016lx, len=0x%016lx\n",
- status, cookie, rp_pa, len);
+ dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
+ "address=0x%016lx, len=0x%016lx\n", ret,
+ (unsigned long)cookie, rp_pa, len);
- if (status != SALRET_MORE_PASSES)
+ if (ret != xpNeedMoreInfo)
break;
+ /* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
if (L1_CACHE_ALIGN(len) > buf_len) {
kfree(buf_base);
buf_len = L1_CACHE_ALIGN(len);
- buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len,
- GFP_KERNEL,
- &buf_base);
+ buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL,
+ &buf_base);
if (buf_base == NULL) {
dev_err(xpc_part, "unable to kmalloc "
"len=0x%016lx\n", buf_len);
- status = SALRET_ERROR;
+ ret = xpNoMemory;
break;
}
}
- bte_res = xp_bte_copy(rp_pa, buf, buf_len,
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
- if (bte_res != BTE_SUCCESS) {
- dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
- status = SALRET_ERROR;
+ ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len);
+ if (ret != xpSuccess) {
+ dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret);
break;
}
}
kfree(buf_base);
- if (status != SALRET_OK)
+ if (ret != xpSuccess)
rp_pa = 0;
dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa);
@@ -156,300 +124,77 @@
* other partitions to discover we are alive and establish initial
* communications.
*/
-struct xpc_rsvd_page *
-xpc_rsvd_page_init(void)
+int
+xpc_setup_rsvd_page(void)
{
+ int ret;
struct xpc_rsvd_page *rp;
- AMO_t *amos_page;
- u64 rp_pa, nasid_array = 0;
- int i, ret;
+ unsigned long rp_pa;
+ unsigned long new_ts_jiffies;
/* get the local reserved page's address */
preempt_disable();
- rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+ rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id()));
preempt_enable();
if (rp_pa == 0) {
dev_err(xpc_part, "SAL failed to locate the reserved page\n");
- return NULL;
+ return -ESRCH;
}
rp = (struct xpc_rsvd_page *)__va(rp_pa);
- if (rp->partid != sn_partition_id) {
- dev_err(xpc_part, "the reserved page's partid of %d should be "
- "%d\n", rp->partid, sn_partition_id);
- return NULL;
+ if (rp->SAL_version < 3) {
+ /* SAL_versions < 3 had a SAL_partid defined as a u8 */
+ rp->SAL_partid &= 0xff;
+ }
+ BUG_ON(rp->SAL_partid != xp_partition_id);
+
+ if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) {
+ dev_err(xpc_part, "the reserved page's partid of %d is outside "
+ "supported range (< 0 || >= %d)\n", rp->SAL_partid,
+ xp_max_npartitions);
+ return -EINVAL;
}
rp->version = XPC_RP_VERSION;
+ rp->max_npartitions = xp_max_npartitions;
/* establish the actual sizes of the nasid masks */
if (rp->SAL_version == 1) {
/* SAL_version 1 didn't set the nasids_size field */
- rp->nasids_size = 128;
+ rp->SAL_nasids_size = 128;
}
- xp_nasid_mask_bytes = rp->nasids_size;
- xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+ xpc_nasid_mask_nbytes = rp->SAL_nasids_size;
+ xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size *
+ BITS_PER_BYTE);
/* setup the pointers to the various items in the reserved page */
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
- xpc_vars = XPC_RP_VARS(rp);
- xpc_vars_part = XPC_RP_VARS_PART(rp);
+
+ ret = xpc_setup_rsvd_page_sn(rp);
+ if (ret != 0)
+ return ret;
/*
- * Before clearing xpc_vars, see if a page of AMOs had been previously
- * allocated. If not we'll need to allocate one and set permissions
- * so that cross-partition AMOs are allowed.
- *
- * The allocated AMO page needs MCA reporting to remain disabled after
- * XPC has unloaded. To make this work, we keep a copy of the pointer
- * to this page (i.e., amos_page) in the struct xpc_vars structure,
- * which is pointed to by the reserved page, and re-use that saved copy
- * on subsequent loads of XPC. This AMO page is never freed, and its
- * memory protections are never restricted.
- */
- amos_page = xpc_vars->amos_page;
- if (amos_page == NULL) {
- amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1));
- if (amos_page == NULL) {
- dev_err(xpc_part, "can't allocate page of AMOs\n");
- return NULL;
- }
-
- /*
- * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems
- * when xpc_allow_IPI_ops() is called via xpc_hb_init().
- */
- if (!enable_shub_wars_1_1()) {
- ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
- PAGE_SIZE,
- SN_MEMPROT_ACCESS_CLASS_1,
- &nasid_array);
- if (ret != 0) {
- dev_err(xpc_part, "can't change memory "
- "protections\n");
- uncached_free_page(__IA64_UNCACHED_OFFSET |
- TO_PHYS((u64)amos_page), 1);
- return NULL;
- }
- }
- } else if (!IS_AMO_ADDRESS((u64)amos_page)) {
- /*
- * EFI's XPBOOT can also set amos_page in the reserved page,
- * but it happens to leave it as an uncached physical address
- * and we need it to be an uncached virtual, so we'll have to
- * convert it.
- */
- if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) {
- dev_err(xpc_part, "previously used amos_page address "
- "is bad = 0x%p\n", (void *)amos_page);
- return NULL;
- }
- amos_page = (AMO_t *)TO_AMO((u64)amos_page);
- }
-
- /* clear xpc_vars */
- memset(xpc_vars, 0, sizeof(struct xpc_vars));
-
- xpc_vars->version = XPC_V_VERSION;
- xpc_vars->act_nasid = cpuid_to_nasid(0);
- xpc_vars->act_phys_cpuid = cpu_physical_id(0);
- xpc_vars->vars_part_pa = __pa(xpc_vars_part);
- xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page);
- xpc_vars->amos_page = amos_page; /* save for next load of XPC */
-
- /* clear xpc_vars_part */
- memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
- XP_MAX_PARTITIONS);
-
- /* initialize the activate IRQ related AMO variables */
- for (i = 0; i < xp_nasid_mask_words; i++)
- (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
-
- /* initialize the engaged remote partitions related AMO variables */
- (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
- (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
-
- /* timestamp of when reserved page was setup by XPC */
- rp->stamp = CURRENT_TIME;
-
- /*
+ * Set timestamp of when reserved page was setup by XPC.
* This signifies to the remote partition that our reserved
* page is initialized.
*/
- rp->vars_pa = __pa(xpc_vars);
+ new_ts_jiffies = jiffies;
+ if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies)
+ new_ts_jiffies++;
+ rp->ts_jiffies = new_ts_jiffies;
- return rp;
+ xpc_rsvd_page = rp;
+ return 0;
}
-/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
void
-xpc_allow_IPI_ops(void)
+xpc_teardown_rsvd_page(void)
{
- int node;
- int nasid;
-
- /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
- if (is_shub2()) {
- xpc_sh2_IPI_access0 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
- xpc_sh2_IPI_access1 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
- xpc_sh2_IPI_access2 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
- xpc_sh2_IPI_access3 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
- -1UL);
- }
-
- } else {
- xpc_sh1_IPI_access =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
- -1UL);
-
- /*
- * Since the BIST collides with memory operations on
- * SHUB 1.1 sn_change_memprotect() cannot be used.
- */
- if (enable_shub_wars_1_1()) {
- /* open up everything */
- xpc_prot_vec[node] = (u64)HUB_L((u64 *)
- GLOBAL_MMR_ADDR
- (nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0));
- HUB_S((u64 *)
- GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0),
- -1UL);
- HUB_S((u64 *)
- GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQRP_MMR_DIR_PRIVEC0),
- -1UL);
- }
- }
- }
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
- int node;
- int nasid;
-
- /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
- if (is_shub2()) {
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
- xpc_sh2_IPI_access0);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
- xpc_sh2_IPI_access1);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
- xpc_sh2_IPI_access2);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
- xpc_sh2_IPI_access3);
- }
-
- } else {
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
- xpc_sh1_IPI_access);
-
- if (enable_shub_wars_1_1()) {
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0),
- xpc_prot_vec[node]);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQRP_MMR_DIR_PRIVEC0),
- xpc_prot_vec[node]);
- }
- }
- }
-}
-
-/*
- * At periodic intervals, scan through all active partitions and ensure
- * their heartbeat is still active. If not, the partition is deactivated.
- */
-void
-xpc_check_remote_hb(void)
-{
- struct xpc_vars *remote_vars;
- struct xpc_partition *part;
- short partid;
- bte_result_t bres;
-
- remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
- for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-
- if (xpc_exiting)
- break;
-
- if (partid == sn_partition_id)
- continue;
-
- part = &xpc_partitions[partid];
-
- if (part->act_state == XPC_P_INACTIVE ||
- part->act_state == XPC_P_DEACTIVATING) {
- continue;
- }
-
- /* pull the remote_hb cache line */
- bres = xp_bte_copy(part->remote_vars_pa,
- (u64)remote_vars,
- XPC_RP_VARS_SIZE,
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
- if (bres != BTE_SUCCESS) {
- XPC_DEACTIVATE_PARTITION(part,
- xpc_map_bte_errors(bres));
- continue;
- }
-
- dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
- " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
- partid, remote_vars->heartbeat, part->last_heartbeat,
- remote_vars->heartbeat_offline,
- remote_vars->heartbeating_to_mask);
-
- if (((remote_vars->heartbeat == part->last_heartbeat) &&
- (remote_vars->heartbeat_offline == 0)) ||
- !xpc_hb_allowed(sn_partition_id, remote_vars)) {
-
- XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
- continue;
- }
-
- part->last_heartbeat = remote_vars->heartbeat;
- }
+ /* a zero timestamp indicates our rsvd page is not initialized */
+ xpc_rsvd_page->ts_jiffies = 0;
}
/*
@@ -459,11 +204,12 @@
* is large enough to contain a copy of their reserved page header and
* part_nasids mask.
*/
-static enum xp_retval
-xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
- struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
+enum xp_retval
+xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids,
+ struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa)
{
- int bres, i;
+ int l;
+ enum xp_retval ret;
/* get the reserved page's physical address */
@@ -472,355 +218,45 @@
return xpNoRsvdPageAddr;
/* pull over the reserved page header and part_nasids mask */
- bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
- XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
- if (bres != BTE_SUCCESS)
- return xpc_map_bte_errors(bres);
+ ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa,
+ XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes);
+ if (ret != xpSuccess)
+ return ret;
if (discovered_nasids != NULL) {
- u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
+ unsigned long *remote_part_nasids =
+ XPC_RP_PART_NASIDS(remote_rp);
- for (i = 0; i < xp_nasid_mask_words; i++)
- discovered_nasids[i] |= remote_part_nasids[i];
+ for (l = 0; l < xpc_nasid_mask_nlongs; l++)
+ discovered_nasids[l] |= remote_part_nasids[l];
}
- /* check that the partid is for another partition */
-
- if (remote_rp->partid < 1 ||
- remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
- return xpInvalidPartid;
- }
-
- if (remote_rp->partid == sn_partition_id)
- return xpLocalPartid;
+ /* zero timestamp indicates the reserved page has not been setup */
+ if (remote_rp->ts_jiffies == 0)
+ return xpRsvdPageNotSet;
if (XPC_VERSION_MAJOR(remote_rp->version) !=
XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
return xpBadVersion;
}
- return xpSuccess;
-}
-
-/*
- * Get a copy of the remote partition's XPC variables from the reserved page.
- *
- * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RP_VARS_SIZE.
- */
-static enum xp_retval
-xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
- int bres;
-
- if (remote_vars_pa == 0)
- return xpVarsNotSet;
-
- /* pull over the cross partition variables */
- bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
- if (bres != BTE_SUCCESS)
- return xpc_map_bte_errors(bres);
-
- if (XPC_VERSION_MAJOR(remote_vars->version) !=
- XPC_VERSION_MAJOR(XPC_V_VERSION)) {
- return xpBadVersion;
+ /* check that both remote and local partids are valid for each side */
+ if (remote_rp->SAL_partid < 0 ||
+ remote_rp->SAL_partid >= xp_max_npartitions ||
+ remote_rp->max_npartitions <= xp_partition_id) {
+ return xpInvalidPartid;
}
+ if (remote_rp->SAL_partid == xp_partition_id)
+ return xpLocalPartid;
+
return xpSuccess;
}
/*
- * Update the remote partition's info.
- */
-static void
-xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
- struct timespec *remote_rp_stamp, u64 remote_rp_pa,
- u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
- part->remote_rp_version = remote_rp_version;
- dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n",
- part->remote_rp_version);
-
- part->remote_rp_stamp = *remote_rp_stamp;
- dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
- part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
-
- part->remote_rp_pa = remote_rp_pa;
- dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
-
- part->remote_vars_pa = remote_vars_pa;
- dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
- part->remote_vars_pa);
-
- part->last_heartbeat = remote_vars->heartbeat;
- dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
- part->last_heartbeat);
-
- part->remote_vars_part_pa = remote_vars->vars_part_pa;
- dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
- part->remote_vars_part_pa);
-
- part->remote_act_nasid = remote_vars->act_nasid;
- dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
- part->remote_act_nasid);
-
- part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
- dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
- part->remote_act_phys_cpuid);
-
- part->remote_amos_page_pa = remote_vars->amos_page_pa;
- dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
- part->remote_amos_page_pa);
-
- part->remote_vars_version = remote_vars->version;
- dev_dbg(xpc_part, " remote_vars_version = 0x%x\n",
- part->remote_vars_version);
-}
-
-/*
- * Prior code has determined the nasid which generated an IPI. Inspect
- * that nasid to determine if its partition needs to be activated or
- * deactivated.
- *
- * A partition is consider "awaiting activation" if our partition
- * flags indicate it is not active and it has a heartbeat. A
- * partition is considered "awaiting deactivation" if our partition
- * flags indicate it is active but it has no heartbeat or it is not
- * sending its heartbeat to us.
- *
- * To determine the heartbeat, the remote nasid must have a properly
- * initialized reserved page.
- */
-static void
-xpc_identify_act_IRQ_req(int nasid)
-{
- struct xpc_rsvd_page *remote_rp;
- struct xpc_vars *remote_vars;
- u64 remote_rp_pa;
- u64 remote_vars_pa;
- int remote_rp_version;
- int reactivate = 0;
- int stamp_diff;
- struct timespec remote_rp_stamp = { 0, 0 };
- short partid;
- struct xpc_partition *part;
- enum xp_retval ret;
-
- /* pull over the reserved page structure */
-
- remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
-
- ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
- if (ret != xpSuccess) {
- dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
- "which sent interrupt, reason=%d\n", nasid, ret);
- return;
- }
-
- remote_vars_pa = remote_rp->vars_pa;
- remote_rp_version = remote_rp->version;
- if (XPC_SUPPORTS_RP_STAMP(remote_rp_version))
- remote_rp_stamp = remote_rp->stamp;
-
- partid = remote_rp->partid;
- part = &xpc_partitions[partid];
-
- /* pull over the cross partition variables */
-
- remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
- ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpSuccess) {
-
- dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
- "which sent interrupt, reason=%d\n", nasid, ret);
-
- XPC_DEACTIVATE_PARTITION(part, ret);
- return;
- }
-
- part->act_IRQ_rcvd++;
-
- dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
- "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
- remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
-
- if (xpc_partition_disengaged(part) &&
- part->act_state == XPC_P_INACTIVE) {
-
- xpc_update_partition_info(part, remote_rp_version,
- &remote_rp_stamp, remote_rp_pa,
- remote_vars_pa, remote_vars);
-
- if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
- if (xpc_partition_disengage_requested(1UL << partid)) {
- /*
- * Other side is waiting on us to disengage,
- * even though we already have.
- */
- return;
- }
- } else {
- /* other side doesn't support disengage requests */
- xpc_clear_partition_disengage_request(1UL << partid);
- }
-
- xpc_activate_partition(part);
- return;
- }
-
- DBUG_ON(part->remote_rp_version == 0);
- DBUG_ON(part->remote_vars_version == 0);
-
- if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
- DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
- remote_vars_version));
-
- if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
- DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
- version));
- /* see if the other side rebooted */
- if (part->remote_amos_page_pa ==
- remote_vars->amos_page_pa &&
- xpc_hb_allowed(sn_partition_id, remote_vars)) {
- /* doesn't look that way, so ignore the IPI */
- return;
- }
- }
-
- /*
- * Other side rebooted and previous XPC didn't support the
- * disengage request, so we don't need to do anything special.
- */
-
- xpc_update_partition_info(part, remote_rp_version,
- &remote_rp_stamp, remote_rp_pa,
- remote_vars_pa, remote_vars);
- part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpReactivating);
- return;
- }
-
- DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
-
- if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
- DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
- /*
- * Other side rebooted and previous XPC did support the
- * disengage request, but the new one doesn't.
- */
-
- xpc_clear_partition_engaged(1UL << partid);
- xpc_clear_partition_disengage_request(1UL << partid);
-
- xpc_update_partition_info(part, remote_rp_version,
- &remote_rp_stamp, remote_rp_pa,
- remote_vars_pa, remote_vars);
- reactivate = 1;
-
- } else {
- DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
- stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
- &remote_rp_stamp);
- if (stamp_diff != 0) {
- DBUG_ON(stamp_diff >= 0);
-
- /*
- * Other side rebooted and the previous XPC did support
- * the disengage request, as does the new one.
- */
-
- DBUG_ON(xpc_partition_engaged(1UL << partid));
- DBUG_ON(xpc_partition_disengage_requested(1UL <<
- partid));
-
- xpc_update_partition_info(part, remote_rp_version,
- &remote_rp_stamp,
- remote_rp_pa, remote_vars_pa,
- remote_vars);
- reactivate = 1;
- }
- }
-
- if (part->disengage_request_timeout > 0 &&
- !xpc_partition_disengaged(part)) {
- /* still waiting on other side to disengage from us */
- return;
- }
-
- if (reactivate) {
- part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-
- } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
- xpc_partition_disengage_requested(1UL << partid)) {
- XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
- }
-}
-
-/*
- * Loop through the activation AMO variables and process any bits
- * which are set. Each bit indicates a nasid sending a partition
- * activation or deactivation request.
- *
- * Return #of IRQs detected.
- */
-int
-xpc_identify_act_IRQ_sender(void)
-{
- int word, bit;
- u64 nasid_mask;
- u64 nasid; /* remote nasid */
- int n_IRQs_detected = 0;
- AMO_t *act_amos;
-
- act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
-
- /* scan through act AMO variable looking for non-zero entries */
- for (word = 0; word < xp_nasid_mask_words; word++) {
-
- if (xpc_exiting)
- break;
-
- nasid_mask = xpc_IPI_receive(&act_amos[word]);
- if (nasid_mask == 0) {
- /* no IRQs from nasids in this variable */
- continue;
- }
-
- dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word,
- nasid_mask);
-
- /*
- * If this nasid has been added to the machine since
- * our partition was reset, this will retain the
- * remote nasid in our reserved pages machine mask.
- * This is used in the event of module reload.
- */
- xpc_mach_nasids[word] |= nasid_mask;
-
- /* locate the nasid(s) which sent interrupts */
-
- for (bit = 0; bit < (8 * sizeof(u64)); bit++) {
- if (nasid_mask & (1UL << bit)) {
- n_IRQs_detected++;
- nasid = XPC_NASID_FROM_W_B(word, bit);
- dev_dbg(xpc_part, "interrupt from nasid %ld\n",
- nasid);
- xpc_identify_act_IRQ_req(nasid);
- }
- }
- }
- return n_IRQs_detected;
-}
-
-/*
- * See if the other side has responded to a partition disengage request
- * from us.
+ * See if the other side has responded to a partition deactivate request
+ * from us. Though we requested the remote partition to deactivate with regard
+ * to us, we really only need to wait for the other side to disengage from us.
*/
int
xpc_partition_disengaged(struct xpc_partition *part)
@@ -828,41 +264,37 @@
short partid = XPC_PARTID(part);
int disengaged;
- disengaged = (xpc_partition_engaged(1UL << partid) == 0);
- if (part->disengage_request_timeout) {
+ disengaged = !xpc_partition_engaged(partid);
+ if (part->disengage_timeout) {
if (!disengaged) {
- if (time_before(jiffies,
- part->disengage_request_timeout)) {
+ if (time_is_after_jiffies(part->disengage_timeout)) {
/* timelimit hasn't been reached yet */
return 0;
}
/*
- * Other side hasn't responded to our disengage
+ * Other side hasn't responded to our deactivate
* request in a timely fashion, so assume it's dead.
*/
- dev_info(xpc_part, "disengage from remote partition %d "
- "timed out\n", partid);
- xpc_disengage_request_timedout = 1;
- xpc_clear_partition_engaged(1UL << partid);
+ dev_info(xpc_part, "deactivate request to remote "
+ "partition %d timed out\n", partid);
+ xpc_disengage_timedout = 1;
+ xpc_assume_partition_disengaged(partid);
disengaged = 1;
}
- part->disengage_request_timeout = 0;
+ part->disengage_timeout = 0;
/* cancel the timer function, provided it's not us */
- if (!in_interrupt()) {
- del_singleshot_timer_sync(&part->
- disengage_request_timer);
- }
+ if (!in_interrupt())
+ del_singleshot_timer_sync(&part->disengage_timer);
- DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
- part->act_state != XPC_P_INACTIVE);
- if (part->act_state != XPC_P_INACTIVE)
+ DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING &&
+ part->act_state != XPC_P_AS_INACTIVE);
+ if (part->act_state != XPC_P_AS_INACTIVE)
xpc_wakeup_channel_mgr(part);
- if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version))
- xpc_cancel_partition_disengage_request(part);
+ xpc_cancel_partition_deactivation_request(part);
}
return disengaged;
}
@@ -879,8 +311,8 @@
dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
spin_lock_irqsave(&part->act_lock, irq_flags);
- if (part->act_state == XPC_P_ACTIVATING) {
- part->act_state = XPC_P_ACTIVE;
+ if (part->act_state == XPC_P_AS_ACTIVATING) {
+ part->act_state = XPC_P_AS_ACTIVE;
ret = xpSuccess;
} else {
DBUG_ON(part->reason == xpSuccess);
@@ -892,7 +324,7 @@
}
/*
- * Notify XPC that the partition is down.
+ * Start the process of deactivating the specified partition.
*/
void
xpc_deactivate_partition(const int line, struct xpc_partition *part,
@@ -902,16 +334,16 @@
spin_lock_irqsave(&part->act_lock, irq_flags);
- if (part->act_state == XPC_P_INACTIVE) {
+ if (part->act_state == XPC_P_AS_INACTIVE) {
XPC_SET_REASON(part, reason, line);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
- xpc_IPI_send_reactivate(part);
+ xpc_request_partition_reactivation(part);
}
return;
}
- if (part->act_state == XPC_P_DEACTIVATING) {
+ if (part->act_state == XPC_P_AS_DEACTIVATING) {
if ((part->reason == xpUnloading && reason != xpUnloading) ||
reason == xpReactivating) {
XPC_SET_REASON(part, reason, line);
@@ -920,22 +352,18 @@
return;
}
- part->act_state = XPC_P_DEACTIVATING;
+ part->act_state = XPC_P_AS_DEACTIVATING;
XPC_SET_REASON(part, reason, line);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
- xpc_request_partition_disengage(part);
- xpc_IPI_send_disengage(part);
+ /* ask remote partition to deactivate with regard to us */
+ xpc_request_partition_deactivation(part);
- /* set a timelimit on the disengage request */
- part->disengage_request_timeout = jiffies +
- (xpc_disengage_request_timelimit * HZ);
- part->disengage_request_timer.expires =
- part->disengage_request_timeout;
- add_timer(&part->disengage_request_timer);
- }
+ /* set a timelimit on the disengage phase of the deactivation request */
+ part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
+ part->disengage_timer.expires = part->disengage_timeout;
+ add_timer(&part->disengage_timer);
dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
XPC_PARTID(part), reason);
@@ -955,7 +383,7 @@
XPC_PARTID(part));
spin_lock_irqsave(&part->act_lock, irq_flags);
- part->act_state = XPC_P_INACTIVE;
+ part->act_state = XPC_P_AS_INACTIVE;
spin_unlock_irqrestore(&part->act_lock, irq_flags);
part->remote_rp_pa = 0;
}
@@ -974,28 +402,22 @@
{
void *remote_rp_base;
struct xpc_rsvd_page *remote_rp;
- struct xpc_vars *remote_vars;
- u64 remote_rp_pa;
- u64 remote_vars_pa;
+ unsigned long remote_rp_pa;
int region;
int region_size;
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
- short partid;
- struct xpc_partition *part;
- u64 *discovered_nasids;
+ unsigned long *discovered_nasids;
enum xp_retval ret;
remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
- xp_nasid_mask_bytes,
+ xpc_nasid_mask_nbytes,
GFP_KERNEL, &remote_rp_base);
if (remote_rp == NULL)
return;
- remote_vars = (struct xpc_vars *)remote_rp;
-
- discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
+ discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs,
GFP_KERNEL);
if (discovered_nasids == NULL) {
kfree(remote_rp_base);
@@ -1010,7 +432,7 @@
* protection is in regards to memory, IOI and IPI.
*/
max_regions = 64;
- region_size = sn_region_size;
+ region_size = xp_region_size;
switch (region_size) {
case 128:
@@ -1038,28 +460,28 @@
dev_dbg(xpc_part, "checking nasid %d\n", nasid);
- if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
+ if (test_bit(nasid / 2, xpc_part_nasids)) {
dev_dbg(xpc_part, "PROM indicates Nasid %d is "
"part of the local partition; skipping "
"region\n", nasid);
break;
}
- if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
+ if (!(test_bit(nasid / 2, xpc_mach_nasids))) {
dev_dbg(xpc_part, "PROM indicates Nasid %d was "
"not on Numa-Link network at reset\n",
nasid);
continue;
}
- if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) {
+ if (test_bit(nasid / 2, discovered_nasids)) {
dev_dbg(xpc_part, "Nasid %d is part of a "
"partition which was previously "
"discovered\n", nasid);
continue;
}
- /* pull over the reserved page structure */
+ /* pull over the rsvd page header & part_nasids mask */
ret = xpc_get_remote_rp(nasid, discovered_nasids,
remote_rp, &remote_rp_pa);
@@ -1074,72 +496,8 @@
continue;
}
- remote_vars_pa = remote_rp->vars_pa;
-
- partid = remote_rp->partid;
- part = &xpc_partitions[partid];
-
- /* pull over the cross partition variables */
-
- ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpSuccess) {
- dev_dbg(xpc_part, "unable to get XPC variables "
- "from nasid %d, reason=%d\n", nasid,
- ret);
-
- XPC_DEACTIVATE_PARTITION(part, ret);
- continue;
- }
-
- if (part->act_state != XPC_P_INACTIVE) {
- dev_dbg(xpc_part, "partition %d on nasid %d is "
- "already activating\n", partid, nasid);
- break;
- }
-
- /*
- * Register the remote partition's AMOs with SAL so it
- * can handle and cleanup errors within that address
- * range should the remote partition go down. We don't
- * unregister this range because it is difficult to
- * tell when outstanding writes to the remote partition
- * are finished and thus when it is thus safe to
- * unregister. This should not result in wasted space
- * in the SAL xp_addr_region table because we should
- * get the same page for remote_act_amos_pa after
- * module reloads and system reboots.
- */
- if (sn_register_xp_addr_region
- (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) {
- dev_dbg(xpc_part,
- "partition %d failed to "
- "register xp_addr region 0x%016lx\n",
- partid, remote_vars->amos_page_pa);
-
- XPC_SET_REASON(part, xpPhysAddrRegFailed,
- __LINE__);
- break;
- }
-
- /*
- * The remote nasid is valid and available.
- * Send an interrupt to that nasid to notify
- * it that we are ready to begin activation.
- */
- dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, "
- "nasid %d, phys_cpuid 0x%x\n",
- remote_vars->amos_page_pa,
- remote_vars->act_nasid,
- remote_vars->act_phys_cpuid);
-
- if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
- version)) {
- part->remote_amos_page_pa =
- remote_vars->amos_page_pa;
- xpc_mark_partition_disengaged(part);
- xpc_cancel_partition_disengage_request(part);
- }
- xpc_IPI_send_activate(remote_vars);
+ xpc_request_partition_activation(remote_rp,
+ remote_rp_pa, nasid);
}
}
@@ -1155,20 +513,16 @@
xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
{
struct xpc_partition *part;
- u64 part_nasid_pa;
- int bte_res;
+ unsigned long part_nasid_pa;
part = &xpc_partitions[partid];
if (part->remote_rp_pa == 0)
return xpPartitionDown;
- memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
+ memset(nasid_mask, 0, xpc_nasid_mask_nbytes);
- part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa);
+ part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa);
- bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask,
- xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE),
- NULL);
-
- return xpc_map_bte_errors(bte_res);
+ return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa,
+ xpc_nasid_mask_nbytes);
}
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
new file mode 100644
index 0000000..b4882cc
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -0,0 +1,2404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) sn2-based functions.
+ *
+ * Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/delay.h>
+#include <asm/uncached.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_sal.h>
+#include "xpc.h"
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap. The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XPC_MAX_PHYSNODES_SN2 (MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES_SN2 ((XPC_MAX_PHYSNODES_SN2 + 7) / 8)
+#define XP_NASID_MASK_WORDS_SN2 ((XPC_MAX_PHYSNODES_SN2 + 63) / 64)
+
+/*
+ * Memory for XPC's amo variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of
+ * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify
+ * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote
+ * partitions (i.e., XPCs) consider themselves currently engaged with the
+ * local XPC and 1 amo variable to request partition deactivation.
+ */
+#define XPC_NOTIFY_IRQ_AMOS_SN2 0
+#define XPC_ACTIVATE_IRQ_AMOS_SN2 (XPC_NOTIFY_IRQ_AMOS_SN2 + \
+ XP_MAX_NPARTITIONS_SN2)
+#define XPC_ENGAGED_PARTITIONS_AMO_SN2 (XPC_ACTIVATE_IRQ_AMOS_SN2 + \
+ XP_NASID_MASK_WORDS_SN2)
+#define XPC_DEACTIVATE_REQUEST_AMO_SN2 (XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1)
+
+/*
+ * Buffer used to store a local copy of portions of a remote partition's
+ * reserved page (either its header and part_nasids mask, or its vars).
+ */
+static void *xpc_remote_copy_buffer_base_sn2;
+static char *xpc_remote_copy_buffer_sn2;
+
+static struct xpc_vars_sn2 *xpc_vars_sn2;
+static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
+
+static int
+xpc_setup_partitions_sn_sn2(void)
+{
+ /* nothing needs to be done */
+ return 0;
+}
+
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access_sn2;
+static u64 xpc_sh2_IPI_access0_sn2;
+static u64 xpc_sh2_IPI_access1_sn2;
+static u64 xpc_sh2_IPI_access2_sn2;
+static u64 xpc_sh2_IPI_access3_sn2;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+ int node;
+ int nasid;
+
+ /* !!! The following should get moved into SAL. */
+ if (is_shub2()) {
+ xpc_sh2_IPI_access0_sn2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+ xpc_sh2_IPI_access1_sn2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+ xpc_sh2_IPI_access2_sn2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+ xpc_sh2_IPI_access3_sn2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+ -1UL);
+ }
+ } else {
+ xpc_sh1_IPI_access_sn2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+ -1UL);
+ }
+ }
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+ int node;
+ int nasid;
+
+ /* !!! The following should get moved into SAL. */
+ if (is_shub2()) {
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+ xpc_sh2_IPI_access0_sn2);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+ xpc_sh2_IPI_access1_sn2);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+ xpc_sh2_IPI_access2_sn2);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+ xpc_sh2_IPI_access3_sn2);
+ }
+ } else {
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+ xpc_sh1_IPI_access_sn2);
+ }
+ }
+}
+
+/*
+ * The following set of functions are used for the sending and receiving of
+ * IRQs (also known as IPIs). There are two flavors of IRQs, one that is
+ * associated with partition activity (SGI_XPC_ACTIVATE) and the other that
+ * is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static u64
+xpc_receive_IRQ_amo_sn2(struct amo *amo)
+{
+ return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
+}
+
+static enum xp_retval
+xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid,
+ int vector)
+{
+ int ret = 0;
+ unsigned long irq_flags;
+
+ local_irq_save(irq_flags);
+
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
+ sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IRQs and amos to it until the heartbeat times out.
+ */
+ ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+
+ return (ret == 0) ? xpSuccess : xpPioReadError;
+}
+
+static struct amo *
+xpc_init_IRQ_amo_sn2(int index)
+{
+ struct amo *amo = xpc_vars_sn2->amos_page + index;
+
+ (void)xpc_receive_IRQ_amo_sn2(amo); /* clear amo variable */
+ return amo;
+}
+
+/*
+ * Functions associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ xpc_activate_IRQ_rcvd++;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Flag the appropriate amo variable and send an IRQ to the specified node.
+ */
+static void
+xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid,
+ int to_nasid, int to_phys_cpuid)
+{
+ struct amo *amos = (struct amo *)__va(amos_page_pa +
+ (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+ sizeof(struct amo)));
+
+ (void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)],
+ BIT_MASK(from_nasid / 2), to_nasid,
+ to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static void
+xpc_send_local_activate_IRQ_sn2(int from_nasid)
+{
+ unsigned long irq_flags;
+ struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa +
+ (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+ sizeof(struct amo)));
+
+ /* fake the sending and receipt of an activate IRQ from remote nasid */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable),
+ FETCHOP_OR, BIT_MASK(from_nasid / 2));
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ xpc_activate_IRQ_rcvd++;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+/*
+ * Functions associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Check to see if any chctl flags were sent from the specified partition.
+ */
+static void
+xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
+{
+ union xpc_channel_ctl_flags chctl;
+ unsigned long irq_flags;
+
+ chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2.
+ local_chctl_amo_va);
+ if (chctl.all_flags == 0)
+ return;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.all_flags |= chctl.all_flags;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
+ "0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+
+ xpc_wakeup_channel_mgr(part);
+}
+
+/*
+ * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
+ * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
+ * than one partition, we use an amo structure per partition to indicate
+ * whether a partition has sent an IRQ or not. If it has, then wake up the
+ * associated kthread to handle it.
+ *
+ * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC
+ * running on other partitions.
+ *
+ * Noteworthy Arguments:
+ *
+ * irq - Interrupt ReQuest number. NOT USED.
+ *
+ * dev_id - partid of IRQ's potential sender.
+ */
+static irqreturn_t
+xpc_handle_notify_IRQ_sn2(int irq, void *dev_id)
+{
+ short partid = (short)(u64)dev_id;
+ struct xpc_partition *part = &xpc_partitions[partid];
+
+ DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2);
+
+ if (xpc_part_ref(part)) {
+ xpc_check_for_sent_chctl_flags_sn2(part);
+
+ xpc_part_deref(part);
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor
+ * because the write to their associated amo variable completed after the IRQ
+ * was received.
+ */
+static void
+xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+ if (xpc_part_ref(part)) {
+ xpc_check_for_sent_chctl_flags_sn2(part);
+
+ part_sn2->dropped_notify_IRQ_timer.expires = jiffies +
+ XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+ add_timer(&part_sn2->dropped_notify_IRQ_timer);
+ xpc_part_deref(part);
+ }
+}
+
+/*
+ * Send a notify IRQ to the remote partition that is associated with the
+ * specified channel.
+ */
+static void
+xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+ char *chctl_flag_string, unsigned long *irq_flags)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ union xpc_channel_ctl_flags chctl = { 0 };
+ enum xp_retval ret;
+
+ if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) {
+ chctl.flags[ch->number] = chctl_flag;
+ ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va,
+ chctl.all_flags,
+ part_sn2->notify_IRQ_nasid,
+ part_sn2->notify_IRQ_phys_cpuid,
+ SGI_XPC_NOTIFY);
+ dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+ chctl_flag_string, ch->partid, ch->number, ret);
+ if (unlikely(ret != xpSuccess)) {
+ if (irq_flags != NULL)
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ if (irq_flags != NULL)
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+ }
+ }
+}
+
+#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \
+ xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us a notify IRQ. This faked IRQ will be handled
+ * by xpc_check_for_dropped_notify_IRQ_sn2().
+ */
+static void
+xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+ char *chctl_flag_string)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
+ union xpc_channel_ctl_flags chctl = { 0 };
+
+ chctl.flags[ch->number] = chctl_flag;
+ FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va->
+ variable), FETCHOP_OR, chctl.all_flags);
+ dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+ chctl_flag_string, ch->partid, ch->number);
+}
+
+#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \
+ xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f)
+
+static void
+xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch,
+ unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+ args->reason = ch->reason;
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+ args->entry_size = ch->entry_size;
+ args->local_nentries = ch->local_nentries;
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+ args->remote_nentries = ch->remote_nentries;
+ args->local_nentries = ch->local_nentries;
+ args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue);
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch)
+{
+ XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch,
+ unsigned long msgqueue_pa)
+{
+ ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa;
+}
+
+/*
+ * This next set of functions are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static void
+xpc_indicate_partition_engaged_sn2(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+ sizeof(struct amo)));
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's amo */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+ BIT(sn_partition_id));
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IRQs and amos to it until the heartbeat times out.
+ */
+ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static void
+xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ unsigned long irq_flags;
+ struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+ sizeof(struct amo)));
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's amo */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+ ~BIT(sn_partition_id));
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IRQs and amos to it until the heartbeat times out.
+ */
+ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+
+ /*
+ * Send activate IRQ to get other side to see that we've cleared our
+ * bit in their engaged partitions amo.
+ */
+ xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+ cnodeid_to_nasid(0),
+ part_sn2->activate_IRQ_nasid,
+ part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_assume_partition_disengaged_sn2(short partid)
+{
+ struct amo *amo = xpc_vars_sn2->amos_page +
+ XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+ /* clear bit(s) based on partid mask in our partition's amo */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+ ~BIT(partid));
+}
+
+static int
+xpc_partition_engaged_sn2(short partid)
+{
+ struct amo *amo = xpc_vars_sn2->amos_page +
+ XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+ /* our partition's amo variable ANDed with partid mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+ BIT(partid)) != 0;
+}
+
+static int
+xpc_any_partition_engaged_sn2(void)
+{
+ struct amo *amo = xpc_vars_sn2->amos_page +
+ XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+ /* our partition's amo variable */
+ return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0;
+}
+
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow amo operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_amo_ops_sn2(struct amo *amos_page)
+{
+ u64 nasid_array = 0;
+ int ret;
+
+ /*
+ * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+ * collides with memory operations. On those systems we call
+ * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead.
+ */
+ if (!enable_shub_wars_1_1()) {
+ ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+ SN_MEMPROT_ACCESS_CLASS_1,
+ &nasid_array);
+ if (ret != 0)
+ return xpSalError;
+ }
+ return xpSuccess;
+}
+
+/*
+ * Change protections to allow amo operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_amo_ops_shub_wars_1_1_sn2(void)
+{
+ int node;
+ int nasid;
+
+ if (!enable_shub_wars_1_1())
+ return;
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ /* save current protection values */
+ xpc_prot_vec_sn2[node] =
+ (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+ /* open up everything */
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+ -1UL);
+ }
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
+ size_t *len)
+{
+ s64 status;
+ enum xp_retval ret;
+
+ status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+ if (status == SALRET_OK)
+ ret = xpSuccess;
+ else if (status == SALRET_MORE_PASSES)
+ ret = xpNeedMoreInfo;
+ else
+ ret = xpSalError;
+
+ return ret;
+}
+
+
+static int
+xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+{
+ struct amo *amos_page;
+ int i;
+ int ret;
+
+ xpc_vars_sn2 = XPC_RP_VARS(rp);
+
+ rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+
+ /* vars_part array follows immediately after vars */
+ xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
+ XPC_RP_VARS_SIZE);
+
+ /*
+ * Before clearing xpc_vars_sn2, see if a page of amos had been
+ * previously allocated. If not we'll need to allocate one and set
+ * permissions so that cross-partition amos are allowed.
+ *
+ * The allocated amo page needs MCA reporting to remain disabled after
+ * XPC has unloaded. To make this work, we keep a copy of the pointer
+ * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure,
+ * which is pointed to by the reserved page, and re-use that saved copy
+ * on subsequent loads of XPC. This amo page is never freed, and its
+ * memory protections are never restricted.
+ */
+ amos_page = xpc_vars_sn2->amos_page;
+ if (amos_page == NULL) {
+ amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1));
+ if (amos_page == NULL) {
+ dev_err(xpc_part, "can't allocate page of amos\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Open up amo-R/W to cpu. This is done on Shub 1.1 systems
+ * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called.
+ */
+ ret = xpc_allow_amo_ops_sn2(amos_page);
+ if (ret != xpSuccess) {
+ dev_err(xpc_part, "can't allow amo operations\n");
+ uncached_free_page(__IA64_UNCACHED_OFFSET |
+ TO_PHYS((u64)amos_page), 1);
+ return -EPERM;
+ }
+ }
+
+ /* clear xpc_vars_sn2 */
+ memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2));
+
+ xpc_vars_sn2->version = XPC_V_VERSION;
+ xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0);
+ xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0);
+ xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2);
+ xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page);
+ xpc_vars_sn2->amos_page = amos_page; /* save for next load of XPC */
+
+ /* clear xpc_vars_part_sn2 */
+ memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) *
+ XP_MAX_NPARTITIONS_SN2);
+
+ /* initialize the activate IRQ related amo variables */
+ for (i = 0; i < xpc_nasid_mask_nlongs; i++)
+ (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i);
+
+ /* initialize the engaged remote partitions related amo variables */
+ (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2);
+ (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2);
+
+ return 0;
+}
+
+static void
+xpc_increment_heartbeat_sn2(void)
+{
+ xpc_vars_sn2->heartbeat++;
+}
+
+static void
+xpc_offline_heartbeat_sn2(void)
+{
+ xpc_increment_heartbeat_sn2();
+ xpc_vars_sn2->heartbeat_offline = 1;
+}
+
+static void
+xpc_online_heartbeat_sn2(void)
+{
+ xpc_increment_heartbeat_sn2();
+ xpc_vars_sn2->heartbeat_offline = 0;
+}
+
+static void
+xpc_heartbeat_init_sn2(void)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+
+ bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
+ xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
+ xpc_online_heartbeat_sn2();
+}
+
+static void
+xpc_heartbeat_exit_sn2(void)
+{
+ xpc_offline_heartbeat_sn2();
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
+{
+ struct xpc_vars_sn2 *remote_vars;
+ enum xp_retval ret;
+
+ remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+ /* pull the remote vars structure that contains the heartbeat */
+ ret = xp_remote_memcpy(xp_pa(remote_vars),
+ part->sn.sn2.remote_vars_pa,
+ XPC_RP_VARS_SIZE);
+ if (ret != xpSuccess)
+ return ret;
+
+ dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
+ "heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+ remote_vars->heartbeat, part->last_heartbeat,
+ remote_vars->heartbeat_offline,
+ remote_vars->heartbeating_to_mask[0]);
+
+ if ((remote_vars->heartbeat == part->last_heartbeat &&
+ remote_vars->heartbeat_offline == 0) ||
+ !xpc_hb_allowed(sn_partition_id,
+ &remote_vars->heartbeating_to_mask)) {
+ ret = xpNoHeartbeat;
+ } else {
+ part->last_heartbeat = remote_vars->heartbeat;
+ }
+
+ return ret;
+}
+
+/*
+ * Get a copy of the remote partition's XPC variables from the reserved page.
+ *
+ * remote_vars points to a buffer that is cacheline aligned for BTE copies and
+ * assumed to be of size XPC_RP_VARS_SIZE.
+ */
+static enum xp_retval
+xpc_get_remote_vars_sn2(unsigned long remote_vars_pa,
+ struct xpc_vars_sn2 *remote_vars)
+{
+ enum xp_retval ret;
+
+ if (remote_vars_pa == 0)
+ return xpVarsNotSet;
+
+ /* pull over the cross partition variables */
+ ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa,
+ XPC_RP_VARS_SIZE);
+ if (ret != xpSuccess)
+ return ret;
+
+ if (XPC_VERSION_MAJOR(remote_vars->version) !=
+ XPC_VERSION_MAJOR(XPC_V_VERSION)) {
+ return xpBadVersion;
+ }
+
+ return xpSuccess;
+}
+
+static void
+xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp,
+ unsigned long remote_rp_pa, int nasid)
+{
+ xpc_send_local_activate_IRQ_sn2(nasid);
+}
+
+static void
+xpc_request_partition_reactivation_sn2(struct xpc_partition *part)
+{
+ xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid);
+}
+
+static void
+xpc_request_partition_deactivation_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ unsigned long irq_flags;
+ struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+ (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+ sizeof(struct amo)));
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's amo */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+ BIT(sn_partition_id));
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IRQs and amos to it until the heartbeat times out.
+ */
+ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+
+ /*
+ * Send activate IRQ to get other side to see that we've set our
+ * bit in their deactivate request amo.
+ */
+ xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+ cnodeid_to_nasid(0),
+ part_sn2->activate_IRQ_nasid,
+ part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+ (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+ sizeof(struct amo)));
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's amo */
+ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+ ~BIT(sn_partition_id));
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IRQs and amos to it until the heartbeat times out.
+ */
+ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static int
+xpc_partition_deactivation_requested_sn2(short partid)
+{
+ struct amo *amo = xpc_vars_sn2->amos_page +
+ XPC_DEACTIVATE_REQUEST_AMO_SN2;
+
+ /* our partition's amo variable ANDed with partid mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+ BIT(partid)) != 0;
+}
+
+/*
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
+ unsigned long *remote_rp_ts_jiffies,
+ unsigned long remote_rp_pa,
+ unsigned long remote_vars_pa,
+ struct xpc_vars_sn2 *remote_vars)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+ part->remote_rp_version = remote_rp_version;
+ dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n",
+ part->remote_rp_version);
+
+ part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies;
+ dev_dbg(xpc_part, " remote_rp_ts_jiffies = 0x%016lx\n",
+ part->remote_rp_ts_jiffies);
+
+ part->remote_rp_pa = remote_rp_pa;
+ dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+ part_sn2->remote_vars_pa = remote_vars_pa;
+ dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
+ part_sn2->remote_vars_pa);
+
+ part->last_heartbeat = remote_vars->heartbeat;
+ dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
+ part->last_heartbeat);
+
+ part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
+ dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
+ part_sn2->remote_vars_part_pa);
+
+ part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid;
+ dev_dbg(xpc_part, " activate_IRQ_nasid = 0x%x\n",
+ part_sn2->activate_IRQ_nasid);
+
+ part_sn2->activate_IRQ_phys_cpuid =
+ remote_vars->activate_IRQ_phys_cpuid;
+ dev_dbg(xpc_part, " activate_IRQ_phys_cpuid = 0x%x\n",
+ part_sn2->activate_IRQ_phys_cpuid);
+
+ part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa;
+ dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
+ part_sn2->remote_amos_page_pa);
+
+ part_sn2->remote_vars_version = remote_vars->version;
+ dev_dbg(xpc_part, " remote_vars_version = 0x%x\n",
+ part_sn2->remote_vars_version);
+}
+
+/*
+ * Prior code has determined the nasid which generated a activate IRQ.
+ * Inspect that nasid to determine if its partition needs to be activated
+ * or deactivated.
+ *
+ * A partition is considered "awaiting activation" if our partition
+ * flags indicate it is not active and it has a heartbeat. A
+ * partition is considered "awaiting deactivation" if our partition
+ * flags indicate it is active but it has no heartbeat or it is not
+ * sending its heartbeat to us.
+ *
+ * To determine the heartbeat, the remote nasid must have a properly
+ * initialized reserved page.
+ */
+static void
+xpc_identify_activate_IRQ_req_sn2(int nasid)
+{
+ struct xpc_rsvd_page *remote_rp;
+ struct xpc_vars_sn2 *remote_vars;
+ unsigned long remote_rp_pa;
+ unsigned long remote_vars_pa;
+ int remote_rp_version;
+ int reactivate = 0;
+ unsigned long remote_rp_ts_jiffies = 0;
+ short partid;
+ struct xpc_partition *part;
+ struct xpc_partition_sn2 *part_sn2;
+ enum xp_retval ret;
+
+ /* pull over the reserved page structure */
+
+ remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2;
+
+ ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
+ if (ret != xpSuccess) {
+ dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
+ "which sent interrupt, reason=%d\n", nasid, ret);
+ return;
+ }
+
+ remote_vars_pa = remote_rp->sn.vars_pa;
+ remote_rp_version = remote_rp->version;
+ remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+
+ partid = remote_rp->SAL_partid;
+ part = &xpc_partitions[partid];
+ part_sn2 = &part->sn.sn2;
+
+ /* pull over the cross partition variables */
+
+ remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+ ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars);
+ if (ret != xpSuccess) {
+ dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
+ "which sent interrupt, reason=%d\n", nasid, ret);
+
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ return;
+ }
+
+ part->activate_IRQ_rcvd++;
+
+ dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
+ "%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+ remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
+
+ if (xpc_partition_disengaged(part) &&
+ part->act_state == XPC_P_AS_INACTIVE) {
+
+ xpc_update_partition_info_sn2(part, remote_rp_version,
+ &remote_rp_ts_jiffies,
+ remote_rp_pa, remote_vars_pa,
+ remote_vars);
+
+ if (xpc_partition_deactivation_requested_sn2(partid)) {
+ /*
+ * Other side is waiting on us to deactivate even though
+ * we already have.
+ */
+ return;
+ }
+
+ xpc_activate_partition(part);
+ return;
+ }
+
+ DBUG_ON(part->remote_rp_version == 0);
+ DBUG_ON(part_sn2->remote_vars_version == 0);
+
+ if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) {
+
+ /* the other side rebooted */
+
+ DBUG_ON(xpc_partition_engaged_sn2(partid));
+ DBUG_ON(xpc_partition_deactivation_requested_sn2(partid));
+
+ xpc_update_partition_info_sn2(part, remote_rp_version,
+ &remote_rp_ts_jiffies,
+ remote_rp_pa, remote_vars_pa,
+ remote_vars);
+ reactivate = 1;
+ }
+
+ if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) {
+ /* still waiting on other side to disengage from us */
+ return;
+ }
+
+ if (reactivate)
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+ else if (xpc_partition_deactivation_requested_sn2(partid))
+ XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+}
+
+/*
+ * Loop through the activation amo variables and process any bits
+ * which are set. Each bit indicates a nasid sending a partition
+ * activation or deactivation request.
+ *
+ * Return #of IRQs detected.
+ */
+int
+xpc_identify_activate_IRQ_sender_sn2(void)
+{
+ int l;
+ int b;
+ unsigned long nasid_mask_long;
+ u64 nasid; /* remote nasid */
+ int n_IRQs_detected = 0;
+ struct amo *act_amos;
+
+ act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2;
+
+ /* scan through activate amo variables looking for non-zero entries */
+ for (l = 0; l < xpc_nasid_mask_nlongs; l++) {
+
+ if (xpc_exiting)
+ break;
+
+ nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]);
+
+ b = find_first_bit(&nasid_mask_long, BITS_PER_LONG);
+ if (b >= BITS_PER_LONG) {
+ /* no IRQs from nasids in this amo variable */
+ continue;
+ }
+
+ dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l,
+ nasid_mask_long);
+
+ /*
+ * If this nasid has been added to the machine since
+ * our partition was reset, this will retain the
+ * remote nasid in our reserved pages machine mask.
+ * This is used in the event of module reload.
+ */
+ xpc_mach_nasids[l] |= nasid_mask_long;
+
+ /* locate the nasid(s) which sent interrupts */
+
+ do {
+ n_IRQs_detected++;
+ nasid = (l * BITS_PER_LONG + b) * 2;
+ dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+ xpc_identify_activate_IRQ_req_sn2(nasid);
+
+ b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
+ b + 1);
+ } while (b < BITS_PER_LONG);
+ }
+ return n_IRQs_detected;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_sn2(void)
+{
+ unsigned long irq_flags;
+ int n_IRQs_expected;
+ int n_IRQs_detected;
+
+ DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ n_IRQs_expected = xpc_activate_IRQ_rcvd;
+ xpc_activate_IRQ_rcvd = 0;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
+ if (n_IRQs_detected < n_IRQs_expected) {
+ /* retry once to help avoid missing amo */
+ (void)xpc_identify_activate_IRQ_sender_sn2();
+ }
+}
+
+/*
+ * Setup the channel structures that are sn2 specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ struct xpc_channel_sn2 *ch_sn2;
+ enum xp_retval retval;
+ int ret;
+ int cpuid;
+ int ch_number;
+ struct timer_list *timer;
+ short partid = XPC_PARTID(part);
+
+ /* allocate all the required GET/PUT values */
+
+ part_sn2->local_GPs =
+ xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+ &part_sn2->local_GPs_base);
+ if (part_sn2->local_GPs == NULL) {
+ dev_err(xpc_chan, "can't get memory for local get/put "
+ "values\n");
+ return xpNoMemory;
+ }
+
+ part_sn2->remote_GPs =
+ xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+ &part_sn2->remote_GPs_base);
+ if (part_sn2->remote_GPs == NULL) {
+ dev_err(xpc_chan, "can't get memory for remote get/put "
+ "values\n");
+ retval = xpNoMemory;
+ goto out_1;
+ }
+
+ part_sn2->remote_GPs_pa = 0;
+
+ /* allocate all the required open and close args */
+
+ part_sn2->local_openclose_args =
+ xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+ GFP_KERNEL, &part_sn2->
+ local_openclose_args_base);
+ if (part_sn2->local_openclose_args == NULL) {
+ dev_err(xpc_chan, "can't get memory for local connect args\n");
+ retval = xpNoMemory;
+ goto out_2;
+ }
+
+ part_sn2->remote_openclose_args_pa = 0;
+
+ part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid);
+
+ part_sn2->notify_IRQ_nasid = 0;
+ part_sn2->notify_IRQ_phys_cpuid = 0;
+ part_sn2->remote_chctl_amo_va = NULL;
+
+ sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid);
+ ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2,
+ IRQF_SHARED, part_sn2->notify_IRQ_owner,
+ (void *)(u64)partid);
+ if (ret != 0) {
+ dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
+ "errno=%d\n", -ret);
+ retval = xpLackOfResources;
+ goto out_3;
+ }
+
+ /* Setup a timer to check for dropped notify IRQs */
+ timer = &part_sn2->dropped_notify_IRQ_timer;
+ init_timer(timer);
+ timer->function =
+ (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2;
+ timer->data = (unsigned long)part;
+ timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+ add_timer(timer);
+
+ for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+ ch_sn2 = &part->channels[ch_number].sn.sn2;
+
+ ch_sn2->local_GP = &part_sn2->local_GPs[ch_number];
+ ch_sn2->local_openclose_args =
+ &part_sn2->local_openclose_args[ch_number];
+
+ mutex_init(&ch_sn2->msg_to_pull_mutex);
+ }
+
+ /*
+ * Setup the per partition specific variables required by the
+ * remote partition to establish channel connections with us.
+ *
+ * The setting of the magic # indicates that these per partition
+ * specific variables are ready to be used.
+ */
+ xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs);
+ xpc_vars_part_sn2[partid].openclose_args_pa =
+ xp_pa(part_sn2->local_openclose_args);
+ xpc_vars_part_sn2[partid].chctl_amo_pa =
+ xp_pa(part_sn2->local_chctl_amo_va);
+ cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */
+ xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid);
+ xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid =
+ cpu_physical_id(cpuid);
+ xpc_vars_part_sn2[partid].nchannels = part->nchannels;
+ xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2;
+
+ return xpSuccess;
+
+ /* setup of ch structures failed */
+out_3:
+ kfree(part_sn2->local_openclose_args_base);
+ part_sn2->local_openclose_args = NULL;
+out_2:
+ kfree(part_sn2->remote_GPs_base);
+ part_sn2->remote_GPs = NULL;
+out_1:
+ kfree(part_sn2->local_GPs_base);
+ part_sn2->local_GPs = NULL;
+ return retval;
+}
+
+/*
+ * Teardown the channel structures that are sn2 specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ short partid = XPC_PARTID(part);
+
+ /*
+ * Indicate that the variables specific to the remote partition are no
+ * longer available for its use.
+ */
+ xpc_vars_part_sn2[partid].magic = 0;
+
+ /* in case we've still got outstanding timers registered... */
+ del_timer_sync(&part_sn2->dropped_notify_IRQ_timer);
+ free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
+
+ kfree(part_sn2->local_openclose_args_base);
+ part_sn2->local_openclose_args = NULL;
+ kfree(part_sn2->remote_GPs_base);
+ part_sn2->remote_GPs = NULL;
+ kfree(part_sn2->local_GPs_base);
+ part_sn2->local_GPs = NULL;
+ part_sn2->local_chctl_amo_va = NULL;
+}
+
+/*
+ * Create a wrapper that hides the underlying mechanism for pulling a cacheline
+ * (or multiple cachelines) from a remote partition.
+ *
+ * src_pa must be a cacheline aligned physical address on the remote partition.
+ * dst must be a cacheline aligned virtual address on this partition.
+ * cnt must be cacheline sized
+ */
+/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */
+static enum xp_retval
+xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst,
+ const unsigned long src_pa, size_t cnt)
+{
+ enum xp_retval ret;
+
+ DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa));
+ DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst));
+ DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
+
+ if (part->act_state == XPC_P_AS_DEACTIVATING)
+ return part->reason;
+
+ ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt);
+ if (ret != xpSuccess) {
+ dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed,"
+ " ret=%d\n", XPC_PARTID(part), ret);
+ }
+ return ret;
+}
+
+/*
+ * Pull the remote per partition specific variables from the specified
+ * partition.
+ */
+static enum xp_retval
+xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ u8 buffer[L1_CACHE_BYTES * 2];
+ struct xpc_vars_part_sn2 *pulled_entry_cacheline =
+ (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer);
+ struct xpc_vars_part_sn2 *pulled_entry;
+ unsigned long remote_entry_cacheline_pa;
+ unsigned long remote_entry_pa;
+ short partid = XPC_PARTID(part);
+ enum xp_retval ret;
+
+ /* pull the cacheline that contains the variables we're interested in */
+
+ DBUG_ON(part_sn2->remote_vars_part_pa !=
+ L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa));
+ DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2);
+
+ remote_entry_pa = part_sn2->remote_vars_part_pa +
+ sn_partition_id * sizeof(struct xpc_vars_part_sn2);
+
+ remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
+
+ pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline
+ + (remote_entry_pa &
+ (L1_CACHE_BYTES - 1)));
+
+ ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline,
+ remote_entry_cacheline_pa,
+ L1_CACHE_BYTES);
+ if (ret != xpSuccess) {
+ dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
+ "partition %d, ret=%d\n", partid, ret);
+ return ret;
+ }
+
+ /* see if they've been set up yet */
+
+ if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 &&
+ pulled_entry->magic != XPC_VP_MAGIC2_SN2) {
+
+ if (pulled_entry->magic != 0) {
+ dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
+ "partition %d has bad magic value (=0x%lx)\n",
+ partid, sn_partition_id, pulled_entry->magic);
+ return xpBadMagic;
+ }
+
+ /* they've not been initialized yet */
+ return xpRetry;
+ }
+
+ if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) {
+
+ /* validate the variables */
+
+ if (pulled_entry->GPs_pa == 0 ||
+ pulled_entry->openclose_args_pa == 0 ||
+ pulled_entry->chctl_amo_pa == 0) {
+
+ dev_err(xpc_chan, "partition %d's XPC vars_part for "
+ "partition %d are not valid\n", partid,
+ sn_partition_id);
+ return xpInvalidAddress;
+ }
+
+ /* the variables we imported look to be valid */
+
+ part_sn2->remote_GPs_pa = pulled_entry->GPs_pa;
+ part_sn2->remote_openclose_args_pa =
+ pulled_entry->openclose_args_pa;
+ part_sn2->remote_chctl_amo_va =
+ (struct amo *)__va(pulled_entry->chctl_amo_pa);
+ part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid;
+ part_sn2->notify_IRQ_phys_cpuid =
+ pulled_entry->notify_IRQ_phys_cpuid;
+
+ if (part->nchannels > pulled_entry->nchannels)
+ part->nchannels = pulled_entry->nchannels;
+
+ /* let the other side know that we've pulled their variables */
+
+ xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2;
+ }
+
+ if (pulled_entry->magic == XPC_VP_MAGIC1_SN2)
+ return xpRetry;
+
+ return xpSuccess;
+}
+
+/*
+ * Establish first contact with the remote partititon. This involves pulling
+ * the XPC per partition variables from the remote partition and waiting for
+ * the remote partition to pull ours.
+ */
+static enum xp_retval
+xpc_make_first_contact_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ enum xp_retval ret;
+
+ /*
+ * Register the remote partition's amos with SAL so it can handle
+ * and cleanup errors within that address range should the remote
+ * partition go down. We don't unregister this range because it is
+ * difficult to tell when outstanding writes to the remote partition
+ * are finished and thus when it is safe to unregister. This should
+ * not result in wasted space in the SAL xp_addr_region table because
+ * we should get the same page for remote_amos_page_pa after module
+ * reloads and system reboots.
+ */
+ if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa,
+ PAGE_SIZE, 1) < 0) {
+ dev_warn(xpc_part, "xpc_activating(%d) failed to register "
+ "xp_addr region\n", XPC_PARTID(part));
+
+ ret = xpPhysAddrRegFailed;
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ return ret;
+ }
+
+ /*
+ * Send activate IRQ to get other side to activate if they've not
+ * already begun to do so.
+ */
+ xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+ cnodeid_to_nasid(0),
+ part_sn2->activate_IRQ_nasid,
+ part_sn2->activate_IRQ_phys_cpuid);
+
+ while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) {
+ if (ret != xpRetry) {
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ return ret;
+ }
+
+ dev_dbg(xpc_part, "waiting to make first contact with "
+ "partition %d\n", XPC_PARTID(part));
+
+ /* wait a 1/4 of a second or so */
+ (void)msleep_interruptible(250);
+
+ if (part->act_state == XPC_P_AS_DEACTIVATING)
+ return part->reason;
+ }
+
+ return xpSuccess;
+}
+
+/*
+ * Get the chctl flags and pull the openclose args and/or remote GPs as needed.
+ */
+static u64
+xpc_get_chctl_all_flags_sn2(struct xpc_partition *part)
+{
+ struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+ unsigned long irq_flags;
+ union xpc_channel_ctl_flags chctl;
+ enum xp_retval ret;
+
+ /*
+ * See if there are any chctl flags to be handled.
+ */
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ chctl = part->chctl;
+ if (chctl.all_flags != 0)
+ part->chctl.all_flags = 0;
+
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ if (xpc_any_openclose_chctl_flags_set(&chctl)) {
+ ret = xpc_pull_remote_cachelines_sn2(part, part->
+ remote_openclose_args,
+ part_sn2->
+ remote_openclose_args_pa,
+ XPC_OPENCLOSE_ARGS_SIZE);
+ if (ret != xpSuccess) {
+ XPC_DEACTIVATE_PARTITION(part, ret);
+
+ dev_dbg(xpc_chan, "failed to pull openclose args from "
+ "partition %d, ret=%d\n", XPC_PARTID(part),
+ ret);
+
+ /* don't bother processing chctl flags anymore */
+ chctl.all_flags = 0;
+ }
+ }
+
+ if (xpc_any_msg_chctl_flags_set(&chctl)) {
+ ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs,
+ part_sn2->remote_GPs_pa,
+ XPC_GP_SIZE);
+ if (ret != xpSuccess) {
+ XPC_DEACTIVATE_PARTITION(part, ret);
+
+ dev_dbg(xpc_chan, "failed to pull GPs from partition "
+ "%d, ret=%d\n", XPC_PARTID(part), ret);
+
+ /* don't bother processing chctl flags anymore */
+ chctl.all_flags = 0;
+ }
+ }
+
+ return chctl.all_flags;
+}
+
+/*
+ * Allocate the local message queue and the notify queue.
+ */
+static enum xp_retval
+xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ unsigned long irq_flags;
+ int nentries;
+ size_t nbytes;
+
+ for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+
+ nbytes = nentries * ch->entry_size;
+ ch_sn2->local_msgqueue =
+ xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL,
+ &ch_sn2->local_msgqueue_base);
+ if (ch_sn2->local_msgqueue == NULL)
+ continue;
+
+ nbytes = nentries * sizeof(struct xpc_notify_sn2);
+ ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL);
+ if (ch_sn2->notify_queue == NULL) {
+ kfree(ch_sn2->local_msgqueue_base);
+ ch_sn2->local_msgqueue = NULL;
+ continue;
+ }
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (nentries < ch->local_nentries) {
+ dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
+ "partid=%d, channel=%d\n", nentries,
+ ch->local_nentries, ch->partid, ch->number);
+
+ ch->local_nentries = nentries;
+ }
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return xpSuccess;
+ }
+
+ dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
+ "queue, partid=%d, channel=%d\n", ch->partid, ch->number);
+ return xpNoMemory;
+}
+
+/*
+ * Allocate the cached remote message queue.
+ */
+static enum xp_retval
+xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ unsigned long irq_flags;
+ int nentries;
+ size_t nbytes;
+
+ DBUG_ON(ch->remote_nentries <= 0);
+
+ for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+
+ nbytes = nentries * ch->entry_size;
+ ch_sn2->remote_msgqueue =
+ xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->
+ remote_msgqueue_base);
+ if (ch_sn2->remote_msgqueue == NULL)
+ continue;
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (nentries < ch->remote_nentries) {
+ dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
+ "partid=%d, channel=%d\n", nentries,
+ ch->remote_nentries, ch->partid, ch->number);
+
+ ch->remote_nentries = nentries;
+ }
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return xpSuccess;
+ }
+
+ dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
+ "partid=%d, channel=%d\n", ch->partid, ch->number);
+ return xpNoMemory;
+}
+
+/*
+ * Allocate message queues and other stuff associated with a channel.
+ *
+ * Note: Assumes all of the channel sizes are filled in.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ enum xp_retval ret;
+
+ DBUG_ON(ch->flags & XPC_C_SETUP);
+
+ ret = xpc_allocate_local_msgqueue_sn2(ch);
+ if (ret == xpSuccess) {
+
+ ret = xpc_allocate_remote_msgqueue_sn2(ch);
+ if (ret != xpSuccess) {
+ kfree(ch_sn2->local_msgqueue_base);
+ ch_sn2->local_msgqueue = NULL;
+ kfree(ch_sn2->notify_queue);
+ ch_sn2->notify_queue = NULL;
+ }
+ }
+ return ret;
+}
+
+/*
+ * Free up message queues and other stuff that were allocated for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+
+ DBUG_ON(!spin_is_locked(&ch->lock));
+
+ ch_sn2->remote_msgqueue_pa = 0;
+
+ ch_sn2->local_GP->get = 0;
+ ch_sn2->local_GP->put = 0;
+ ch_sn2->remote_GP.get = 0;
+ ch_sn2->remote_GP.put = 0;
+ ch_sn2->w_local_GP.get = 0;
+ ch_sn2->w_local_GP.put = 0;
+ ch_sn2->w_remote_GP.get = 0;
+ ch_sn2->w_remote_GP.put = 0;
+ ch_sn2->next_msg_to_pull = 0;
+
+ if (ch->flags & XPC_C_SETUP) {
+ dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
+ ch->flags, ch->partid, ch->number);
+
+ kfree(ch_sn2->local_msgqueue_base);
+ ch_sn2->local_msgqueue = NULL;
+ kfree(ch_sn2->remote_msgqueue_base);
+ ch_sn2->remote_msgqueue = NULL;
+ kfree(ch_sn2->notify_queue);
+ ch_sn2->notify_queue = NULL;
+ }
+}
+
+/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
+{
+ struct xpc_notify_sn2 *notify;
+ u8 notify_type;
+ s64 get = ch->sn.sn2.w_remote_GP.get - 1;
+
+ while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+ notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries];
+
+ /*
+ * See if the notify entry indicates it was associated with
+ * a message who's sender wants to be notified. It is possible
+ * that it is, but someone else is doing or has done the
+ * notification.
+ */
+ notify_type = notify->type;
+ if (notify_type == 0 ||
+ cmpxchg(¬ify->type, notify_type, 0) != notify_type) {
+ continue;
+ }
+
+ DBUG_ON(notify_type != XPC_N_CALL);
+
+ atomic_dec(&ch->n_to_notify);
+
+ if (notify->func != NULL) {
+ dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
+ "msg_number=%ld partid=%d channel=%d\n",
+ (void *)notify, get, ch->partid, ch->number);
+
+ notify->func(reason, ch->partid, ch->number,
+ notify->key);
+
+ dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
+ " msg_number=%ld partid=%d channel=%d\n",
+ (void *)notify, get, ch->partid, ch->number);
+ }
+ }
+}
+
+static void
+xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch)
+{
+ xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put);
+}
+
+/*
+ * Clear some of the msg flags in the local message queue.
+ */
+static inline void
+xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ s64 get;
+
+ get = ch_sn2->w_remote_GP.get;
+ do {
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+ (get % ch->local_nentries) *
+ ch->entry_size);
+ msg->flags = 0;
+ } while (++get < ch_sn2->remote_GP.get);
+}
+
+/*
+ * Clear some of the msg flags in the remote message queue.
+ */
+static inline void
+xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ s64 put;
+
+ put = ch_sn2->w_remote_GP.put;
+ do {
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+ (put % ch->remote_nentries) *
+ ch->entry_size);
+ msg->flags = 0;
+ } while (++put < ch_sn2->remote_GP.put);
+}
+
+static int
+xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch)
+{
+ return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get;
+}
+
+static void
+xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
+{
+ struct xpc_channel *ch = &part->channels[ch_number];
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ int npayloads_sent;
+
+ ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number];
+
+ /* See what, if anything, has changed for each connected channel */
+
+ xpc_msgqueue_ref(ch);
+
+ if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get &&
+ ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) {
+ /* nothing changed since GPs were last pulled */
+ xpc_msgqueue_deref(ch);
+ return;
+ }
+
+ if (!(ch->flags & XPC_C_CONNECTED)) {
+ xpc_msgqueue_deref(ch);
+ return;
+ }
+
+ /*
+ * First check to see if messages recently sent by us have been
+ * received by the other side. (The remote GET value will have
+ * changed since we last looked at it.)
+ */
+
+ if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) {
+
+ /*
+ * We need to notify any senders that want to be notified
+ * that their sent messages have been received by their
+ * intended recipients. We need to do this before updating
+ * w_remote_GP.get so that we don't allocate the same message
+ * queue entries prematurely (see xpc_allocate_msg()).
+ */
+ if (atomic_read(&ch->n_to_notify) > 0) {
+ /*
+ * Notify senders that messages sent have been
+ * received and delivered by the other side.
+ */
+ xpc_notify_senders_sn2(ch, xpMsgDelivered,
+ ch_sn2->remote_GP.get);
+ }
+
+ /*
+ * Clear msg->flags in previously sent messages, so that
+ * they're ready for xpc_allocate_msg().
+ */
+ xpc_clear_local_msgqueue_flags_sn2(ch);
+
+ ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
+
+ dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+ "channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
+ ch->number);
+
+ /*
+ * If anyone was waiting for message queue entries to become
+ * available, wake them up.
+ */
+ if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+ wake_up(&ch->msg_allocate_wq);
+ }
+
+ /*
+ * Now check for newly sent messages by the other side. (The remote
+ * PUT value will have changed since we last looked at it.)
+ */
+
+ if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) {
+ /*
+ * Clear msg->flags in previously received messages, so that
+ * they're ready for xpc_get_deliverable_payload_sn2().
+ */
+ xpc_clear_remote_msgqueue_flags_sn2(ch);
+
+ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+
+ dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+ "channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
+ ch->number);
+
+ npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch);
+ if (npayloads_sent > 0) {
+ dev_dbg(xpc_chan, "msgs waiting to be copied and "
+ "delivered=%d, partid=%d, channel=%d\n",
+ npayloads_sent, ch->partid, ch->number);
+
+ if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
+ xpc_activate_kthreads(ch, npayloads_sent);
+ }
+ }
+
+ xpc_msgqueue_deref(ch);
+}
+
+static struct xpc_msg_sn2 *
+xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ unsigned long remote_msg_pa;
+ struct xpc_msg_sn2 *msg;
+ u32 msg_index;
+ u32 nmsgs;
+ u64 msg_offset;
+ enum xp_retval ret;
+
+ if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) {
+ /* we were interrupted by a signal */
+ return NULL;
+ }
+
+ while (get >= ch_sn2->next_msg_to_pull) {
+
+ /* pull as many messages as are ready and able to be pulled */
+
+ msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries;
+
+ DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put);
+ nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull;
+ if (msg_index + nmsgs > ch->remote_nentries) {
+ /* ignore the ones that wrap the msg queue for now */
+ nmsgs = ch->remote_nentries - msg_index;
+ }
+
+ msg_offset = msg_index * ch->entry_size;
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+ msg_offset);
+ remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset;
+
+ ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa,
+ nmsgs * ch->entry_size);
+ if (ret != xpSuccess) {
+
+ dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
+ " msg %ld from partition %d, channel=%d, "
+ "ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
+ ch->partid, ch->number, ret);
+
+ XPC_DEACTIVATE_PARTITION(part, ret);
+
+ mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+ return NULL;
+ }
+
+ ch_sn2->next_msg_to_pull += nmsgs;
+ }
+
+ mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+
+ /* return the message we were looking for */
+ msg_offset = (get % ch->remote_nentries) * ch->entry_size;
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset);
+
+ return msg;
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ void *payload = NULL;
+ s64 get;
+
+ do {
+ if (ch->flags & XPC_C_DISCONNECTING)
+ break;
+
+ get = ch_sn2->w_local_GP.get;
+ rmb(); /* guarantee that .get loads before .put */
+ if (get == ch_sn2->w_remote_GP.put)
+ break;
+
+ /* There are messages waiting to be pulled and delivered.
+ * We need to try to secure one for ourselves. We'll do this
+ * by trying to increment w_local_GP.get and hope that no one
+ * else beats us to it. If they do, we'll we'll simply have
+ * to try again for the next one.
+ */
+
+ if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
+ /* we got the entry referenced by get */
+
+ dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+ "partid=%d, channel=%d\n", get + 1,
+ ch->partid, ch->number);
+
+ /* pull the message from the remote partition */
+
+ msg = xpc_pull_remote_msg_sn2(ch, get);
+
+ DBUG_ON(msg != NULL && msg->number != get);
+ DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
+ DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+
+ payload = &msg->payload;
+ break;
+ }
+
+ } while (1);
+
+ return payload;
+}
+
+/*
+ * Now we actually send the messages that are ready to be sent by advancing
+ * the local message queue's Put value and then send a chctl msgrequest to the
+ * recipient partition.
+ */
+static void
+xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ s64 put = initial_put + 1;
+ int send_msgrequest = 0;
+
+ while (1) {
+
+ while (1) {
+ if (put == ch_sn2->w_local_GP.put)
+ break;
+
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+ local_msgqueue + (put %
+ ch->local_nentries) *
+ ch->entry_size);
+
+ if (!(msg->flags & XPC_M_SN2_READY))
+ break;
+
+ put++;
+ }
+
+ if (put == initial_put) {
+ /* nothing's changed */
+ break;
+ }
+
+ if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) !=
+ initial_put) {
+ /* someone else beat us to it */
+ DBUG_ON(ch_sn2->local_GP->put < initial_put);
+ break;
+ }
+
+ /* we just set the new value of local_GP->put */
+
+ dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+ "channel=%d\n", put, ch->partid, ch->number);
+
+ send_msgrequest = 1;
+
+ /*
+ * We need to ensure that the message referenced by
+ * local_GP->put is not XPC_M_SN2_READY or that local_GP->put
+ * equals w_local_GP.put, so we'll go have a look.
+ */
+ initial_put = put;
+ }
+
+ if (send_msgrequest)
+ xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+/*
+ * Allocate an entry for a message from the message queue associated with the
+ * specified channel.
+ */
+static enum xp_retval
+xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
+ struct xpc_msg_sn2 **address_of_msg)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ enum xp_retval ret;
+ s64 put;
+
+ /*
+ * Get the next available message entry from the local message queue.
+ * If none are available, we'll make sure that we grab the latest
+ * GP values.
+ */
+ ret = xpTimeout;
+
+ while (1) {
+
+ put = ch_sn2->w_local_GP.put;
+ rmb(); /* guarantee that .put loads before .get */
+ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+
+ /* There are available message entries. We need to try
+ * to secure one for ourselves. We'll do this by trying
+ * to increment w_local_GP.put as long as someone else
+ * doesn't beat us to it. If they do, we'll have to
+ * try again.
+ */
+ if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) ==
+ put) {
+ /* we got the entry referenced by put */
+ break;
+ }
+ continue; /* try again */
+ }
+
+ /*
+ * There aren't any available msg entries at this time.
+ *
+ * In waiting for a message entry to become available,
+ * we set a timeout in case the other side is not sending
+ * completion interrupts. This lets us fake a notify IRQ
+ * that will cause the notify IRQ handler to fetch the latest
+ * GP values as if an interrupt was sent by the other side.
+ */
+ if (ret == xpTimeout)
+ xpc_send_chctl_local_msgrequest_sn2(ch);
+
+ if (flags & XPC_NOWAIT)
+ return xpNoWait;
+
+ ret = xpc_allocate_msg_wait(ch);
+ if (ret != xpInterrupted && ret != xpTimeout)
+ return ret;
+ }
+
+ /* get the message's address and initialize it */
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+ (put % ch->local_nentries) *
+ ch->entry_size);
+
+ DBUG_ON(msg->flags != 0);
+ msg->number = put;
+
+ dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
+ "msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+ (void *)msg, msg->number, ch->partid, ch->number);
+
+ *address_of_msg = msg;
+ return xpSuccess;
+}
+
+/*
+ * Common code that does the actual sending of the message by advancing the
+ * local message queue's Put value and sends a chctl msgrequest to the
+ * partition the message is being sent to.
+ */
+static enum xp_retval
+xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
+ u16 payload_size, u8 notify_type, xpc_notify_func func,
+ void *key)
+{
+ enum xp_retval ret = xpSuccess;
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg = msg;
+ struct xpc_notify_sn2 *notify = notify;
+ s64 msg_number;
+ s64 put;
+
+ DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
+
+ if (XPC_MSG_SIZE(payload_size) > ch->entry_size)
+ return xpPayloadTooBig;
+
+ xpc_msgqueue_ref(ch);
+
+ if (ch->flags & XPC_C_DISCONNECTING) {
+ ret = ch->reason;
+ goto out_1;
+ }
+ if (!(ch->flags & XPC_C_CONNECTED)) {
+ ret = xpNotConnected;
+ goto out_1;
+ }
+
+ ret = xpc_allocate_msg_sn2(ch, flags, &msg);
+ if (ret != xpSuccess)
+ goto out_1;
+
+ msg_number = msg->number;
+
+ if (notify_type != 0) {
+ /*
+ * Tell the remote side to send an ACK interrupt when the
+ * message has been delivered.
+ */
+ msg->flags |= XPC_M_SN2_INTERRUPT;
+
+ atomic_inc(&ch->n_to_notify);
+
+ notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries];
+ notify->func = func;
+ notify->key = key;
+ notify->type = notify_type;
+
+ /* ??? Is a mb() needed here? */
+
+ if (ch->flags & XPC_C_DISCONNECTING) {
+ /*
+ * An error occurred between our last error check and
+ * this one. We will try to clear the type field from
+ * the notify entry. If we succeed then
+ * xpc_disconnect_channel() didn't already process
+ * the notify entry.
+ */
+ if (cmpxchg(¬ify->type, notify_type, 0) ==
+ notify_type) {
+ atomic_dec(&ch->n_to_notify);
+ ret = ch->reason;
+ }
+ goto out_1;
+ }
+ }
+
+ memcpy(&msg->payload, payload, payload_size);
+
+ msg->flags |= XPC_M_SN2_READY;
+
+ /*
+ * The preceding store of msg->flags must occur before the following
+ * load of local_GP->put.
+ */
+ mb();
+
+ /* see if the message is next in line to be sent, if so send it */
+
+ put = ch_sn2->local_GP->put;
+ if (put == msg_number)
+ xpc_send_msgs_sn2(ch, put);
+
+out_1:
+ xpc_msgqueue_deref(ch);
+ return ret;
+}
+
+/*
+ * Now we actually acknowledge the messages that have been delivered and ack'd
+ * by advancing the cached remote message queue's Get value and if requested
+ * send a chctl msgrequest to the message sender's partition.
+ *
+ * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition
+ * that sent the message.
+ */
+static void
+xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
+{
+ struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+ struct xpc_msg_sn2 *msg;
+ s64 get = initial_get + 1;
+ int send_msgrequest = 0;
+
+ while (1) {
+
+ while (1) {
+ if (get == ch_sn2->w_local_GP.get)
+ break;
+
+ msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+ remote_msgqueue + (get %
+ ch->remote_nentries) *
+ ch->entry_size);
+
+ if (!(msg->flags & XPC_M_SN2_DONE))
+ break;
+
+ msg_flags |= msg->flags;
+ get++;
+ }
+
+ if (get == initial_get) {
+ /* nothing's changed */
+ break;
+ }
+
+ if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) !=
+ initial_get) {
+ /* someone else beat us to it */
+ DBUG_ON(ch_sn2->local_GP->get <= initial_get);
+ break;
+ }
+
+ /* we just set the new value of local_GP->get */
+
+ dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+ "channel=%d\n", get, ch->partid, ch->number);
+
+ send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
+
+ /*
+ * We need to ensure that the message referenced by
+ * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get
+ * equals w_local_GP.get, so we'll go have a look.
+ */
+ initial_get = get;
+ }
+
+ if (send_msgrequest)
+ xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+static void
+xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
+{
+ struct xpc_msg_sn2 *msg;
+ s64 msg_number;
+ s64 get;
+
+ msg = container_of(payload, struct xpc_msg_sn2, payload);
+ msg_number = msg->number;
+
+ dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+ (void *)msg, msg_number, ch->partid, ch->number);
+
+ DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+ msg_number % ch->remote_nentries);
+ DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+
+ msg->flags |= XPC_M_SN2_DONE;
+
+ /*
+ * The preceding store of msg->flags must occur before the following
+ * load of local_GP->get.
+ */
+ mb();
+
+ /*
+ * See if this message is next in line to be acknowledged as having
+ * been delivered.
+ */
+ get = ch->sn.sn2.local_GP->get;
+ if (get == msg_number)
+ xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
+}
+
+int
+xpc_init_sn2(void)
+{
+ int ret;
+ size_t buf_size;
+
+ xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
+ xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
+ xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+ xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
+ xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
+ xpc_online_heartbeat = xpc_online_heartbeat_sn2;
+ xpc_heartbeat_init = xpc_heartbeat_init_sn2;
+ xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
+ xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
+
+ xpc_request_partition_activation = xpc_request_partition_activation_sn2;
+ xpc_request_partition_reactivation =
+ xpc_request_partition_reactivation_sn2;
+ xpc_request_partition_deactivation =
+ xpc_request_partition_deactivation_sn2;
+ xpc_cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_sn2;
+
+ xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
+ xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
+ xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
+ xpc_make_first_contact = xpc_make_first_contact_sn2;
+
+ xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
+ xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
+ xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
+ xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
+ xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+
+ xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
+
+ xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
+ xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
+
+ xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
+ xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
+ xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
+ xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
+
+ xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
+ xpc_indicate_partition_disengaged =
+ xpc_indicate_partition_disengaged_sn2;
+ xpc_partition_engaged = xpc_partition_engaged_sn2;
+ xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
+ xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
+
+ xpc_send_payload = xpc_send_payload_sn2;
+ xpc_received_payload = xpc_received_payload_sn2;
+
+ if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
+ dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
+ "larger than %d\n", XPC_MSG_HDR_MAX_SIZE);
+ return -E2BIG;
+ }
+
+ buf_size = max(XPC_RP_VARS_SIZE,
+ XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2);
+ xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size,
+ GFP_KERNEL,
+ &xpc_remote_copy_buffer_base_sn2);
+ if (xpc_remote_copy_buffer_sn2 == NULL) {
+ dev_err(xpc_part, "can't get memory for remote copy buffer\n");
+ return -ENOMEM;
+ }
+
+ /* open up protections for IPI and [potentially] amo operations */
+ xpc_allow_IPI_ops_sn2();
+ xpc_allow_amo_ops_shub_wars_1_1_sn2();
+
+ /*
+ * This is safe to do before the xpc_hb_checker thread has started
+ * because the handler releases a wait queue. If an interrupt is
+ * received before the thread is waiting, it will not go to sleep,
+ * but rather immediately process the interrupt.
+ */
+ ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+ "xpc hb", NULL);
+ if (ret != 0) {
+ dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+ "errno=%d\n", -ret);
+ xpc_disallow_IPI_ops_sn2();
+ kfree(xpc_remote_copy_buffer_base_sn2);
+ }
+ return ret;
+}
+
+void
+xpc_exit_sn2(void)
+{
+ free_irq(SGI_XPC_ACTIVATE, NULL);
+ xpc_disallow_IPI_ops_sn2();
+ kfree(xpc_remote_copy_buffer_base_sn2);
+}
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
new file mode 100644
index 0000000..1ac694c
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -0,0 +1,1443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) uv-based functions.
+ *
+ * Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/gru.h"
+#include "../sgi-gru/grukservices.h"
+#include "xpc.h"
+
+static atomic64_t xpc_heartbeat_uv;
+static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+
+#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES)
+#define XPC_NOTIFY_MSG_SIZE_UV (2 * GRU_CACHE_LINE_BYTES)
+
+#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
+ XPC_ACTIVATE_MSG_SIZE_UV)
+#define XPC_NOTIFY_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
+ XPC_NOTIFY_MSG_SIZE_UV)
+
+static void *xpc_activate_mq_uv;
+static void *xpc_notify_mq_uv;
+
+static int
+xpc_setup_partitions_sn_uv(void)
+{
+ short partid;
+ struct xpc_partition_uv *part_uv;
+
+ for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+ part_uv = &xpc_partitions[partid].sn.uv;
+
+ spin_lock_init(&part_uv->flags_lock);
+ part_uv->remote_act_state = XPC_P_AS_INACTIVE;
+ }
+ return 0;
+}
+
+static void *
+xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq,
+ irq_handler_t irq_handler)
+{
+ int ret;
+ int nid;
+ int mq_order;
+ struct page *page;
+ void *mq;
+
+ nid = cpu_to_node(cpuid);
+ mq_order = get_order(mq_size);
+ page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+ mq_order);
+ if (page == NULL) {
+ dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
+ "bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
+ return NULL;
+ }
+
+ mq = page_address(page);
+ ret = gru_create_message_queue(mq, mq_size);
+ if (ret != 0) {
+ dev_err(xpc_part, "gru_create_message_queue() returned "
+ "error=%d\n", ret);
+ free_pages((unsigned long)mq, mq_order);
+ return NULL;
+ }
+
+ /* !!! Need to do some other things to set up IRQ */
+
+ ret = request_irq(irq, irq_handler, 0, "xpc", NULL);
+ if (ret != 0) {
+ dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n",
+ irq, ret);
+ free_pages((unsigned long)mq, mq_order);
+ return NULL;
+ }
+
+ /* !!! enable generation of irq when GRU mq op occurs to this mq */
+
+ /* ??? allow other partitions to access GRU mq? */
+
+ return mq;
+}
+
+static void
+xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq)
+{
+ /* ??? disallow other partitions to access GRU mq? */
+
+ /* !!! disable generation of irq when GRU mq op occurs to this mq */
+
+ free_irq(irq, NULL);
+
+ free_pages((unsigned long)mq, get_order(mq_size));
+}
+
+static enum xp_retval
+xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size)
+{
+ enum xp_retval xp_ret;
+ int ret;
+
+ while (1) {
+ ret = gru_send_message_gpa(mq_gpa, msg, msg_size);
+ if (ret == MQE_OK) {
+ xp_ret = xpSuccess;
+ break;
+ }
+
+ if (ret == MQE_QUEUE_FULL) {
+ dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+ "error=MQE_QUEUE_FULL\n");
+ /* !!! handle QLimit reached; delay & try again */
+ /* ??? Do we add a limit to the number of retries? */
+ (void)msleep_interruptible(10);
+ } else if (ret == MQE_CONGESTION) {
+ dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+ "error=MQE_CONGESTION\n");
+ /* !!! handle LB Overflow; simply try again */
+ /* ??? Do we add a limit to the number of retries? */
+ } else {
+ /* !!! Currently this is MQE_UNEXPECTED_CB_ERR */
+ dev_err(xpc_chan, "gru_send_message_gpa() returned "
+ "error=%d\n", ret);
+ xp_ret = xpGruSendMqError;
+ break;
+ }
+ }
+ return xp_ret;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_uv(void)
+{
+ unsigned long irq_flags;
+ short partid;
+ struct xpc_partition *part;
+ u8 act_state_req;
+
+ DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+ part = &xpc_partitions[partid];
+
+ if (part->sn.uv.act_state_req == 0)
+ continue;
+
+ xpc_activate_IRQ_rcvd--;
+ BUG_ON(xpc_activate_IRQ_rcvd < 0);
+
+ act_state_req = part->sn.uv.act_state_req;
+ part->sn.uv.act_state_req = 0;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ if (act_state_req == XPC_P_ASR_ACTIVATE_UV) {
+ if (part->act_state == XPC_P_AS_INACTIVE)
+ xpc_activate_partition(part);
+ else if (part->act_state == XPC_P_AS_DEACTIVATING)
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+ } else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) {
+ if (part->act_state == XPC_P_AS_INACTIVE)
+ xpc_activate_partition(part);
+ else
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+ } else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) {
+ XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason);
+
+ } else {
+ BUG();
+ }
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (xpc_activate_IRQ_rcvd == 0)
+ break;
+ }
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+}
+
+static void
+xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
+ struct xpc_activate_mq_msghdr_uv *msg_hdr,
+ int *wakeup_hb_checker)
+{
+ unsigned long irq_flags;
+ struct xpc_partition_uv *part_uv = &part->sn.uv;
+ struct xpc_openclose_args *args;
+
+ part_uv->remote_act_state = msg_hdr->act_state;
+
+ switch (msg_hdr->type) {
+ case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV:
+ /* syncing of remote_act_state was just done above */
+ break;
+
+ case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
+ struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+ msg = container_of(msg_hdr,
+ struct xpc_activate_mq_msg_heartbeat_req_uv,
+ hdr);
+ part_uv->heartbeat = msg->heartbeat;
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
+ struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+ msg = container_of(msg_hdr,
+ struct xpc_activate_mq_msg_heartbeat_req_uv,
+ hdr);
+ part_uv->heartbeat = msg->heartbeat;
+
+ spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
+ spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
+ struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+ msg = container_of(msg_hdr,
+ struct xpc_activate_mq_msg_heartbeat_req_uv,
+ hdr);
+ part_uv->heartbeat = msg->heartbeat;
+
+ spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
+ spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
+ struct xpc_activate_mq_msg_activate_req_uv *msg;
+
+ /*
+ * ??? Do we deal here with ts_jiffies being different
+ * ??? if act_state != XPC_P_AS_INACTIVE instead of
+ * ??? below?
+ */
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_activate_req_uv, hdr);
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
+ part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
+ part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+ part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ (*wakeup_hb_checker)++;
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: {
+ struct xpc_activate_mq_msg_deactivate_req_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_deactivate_req_uv, hdr);
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+ part_uv->reason = msg->reason;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ (*wakeup_hb_checker)++;
+ return;
+ }
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: {
+ struct xpc_activate_mq_msg_chctl_closerequest_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_closerequest_uv,
+ hdr);
+ args = &part->remote_openclose_args[msg->ch_number];
+ args->reason = msg->reason;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: {
+ struct xpc_activate_mq_msg_chctl_closereply_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_closereply_uv,
+ hdr);
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: {
+ struct xpc_activate_mq_msg_chctl_openrequest_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_openrequest_uv,
+ hdr);
+ args = &part->remote_openclose_args[msg->ch_number];
+ args->entry_size = msg->entry_size;
+ args->local_nentries = msg->local_nentries;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: {
+ struct xpc_activate_mq_msg_chctl_openreply_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_openreply_uv, hdr);
+ args = &part->remote_openclose_args[msg->ch_number];
+ args->remote_nentries = msg->remote_nentries;
+ args->local_nentries = msg->local_nentries;
+ args->local_msgqueue_pa = msg->local_notify_mq_gpa;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ break;
+ }
+ case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
+ spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ part_uv->flags |= XPC_P_ENGAGED_UV;
+ spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ break;
+
+ case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV:
+ spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ part_uv->flags &= ~XPC_P_ENGAGED_UV;
+ spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ break;
+
+ default:
+ dev_err(xpc_part, "received unknown activate_mq msg type=%d "
+ "from partition=%d\n", msg_hdr->type, XPC_PARTID(part));
+
+ /* get hb checker to deactivate from the remote partition */
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+ part_uv->reason = xpBadMsgType;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ (*wakeup_hb_checker)++;
+ return;
+ }
+
+ if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies &&
+ part->remote_rp_ts_jiffies != 0) {
+ /*
+ * ??? Does what we do here need to be sensitive to
+ * ??? act_state or remote_act_state?
+ */
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ (*wakeup_hb_checker)++;
+ }
+}
+
+static irqreturn_t
+xpc_handle_activate_IRQ_uv(int irq, void *dev_id)
+{
+ struct xpc_activate_mq_msghdr_uv *msg_hdr;
+ short partid;
+ struct xpc_partition *part;
+ int wakeup_hb_checker = 0;
+
+ while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) {
+
+ partid = msg_hdr->partid;
+ if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+ dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() "
+ "received invalid partid=0x%x in message\n",
+ partid);
+ } else {
+ part = &xpc_partitions[partid];
+ if (xpc_part_ref(part)) {
+ xpc_handle_activate_mq_msg_uv(part, msg_hdr,
+ &wakeup_hb_checker);
+ xpc_part_deref(part);
+ }
+ }
+
+ gru_free_message(xpc_activate_mq_uv, msg_hdr);
+ }
+
+ if (wakeup_hb_checker)
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+
+ return IRQ_HANDLED;
+}
+
+static enum xp_retval
+xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size,
+ int msg_type)
+{
+ struct xpc_activate_mq_msghdr_uv *msg_hdr = msg;
+
+ DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV);
+
+ msg_hdr->type = msg_type;
+ msg_hdr->partid = XPC_PARTID(part);
+ msg_hdr->act_state = part->act_state;
+ msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies;
+
+ /* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */
+ return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg,
+ msg_size);
+}
+
+static void
+xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg,
+ size_t msg_size, int msg_type)
+{
+ enum xp_retval ret;
+
+ ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+ if (unlikely(ret != xpSuccess))
+ XPC_DEACTIVATE_PARTITION(part, ret);
+}
+
+static void
+xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags,
+ void *msg, size_t msg_size, int msg_type)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->number];
+ enum xp_retval ret;
+
+ ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+ if (unlikely(ret != xpSuccess)) {
+ if (irq_flags != NULL)
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+ XPC_DEACTIVATE_PARTITION(part, ret);
+
+ if (irq_flags != NULL)
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+ }
+}
+
+static void
+xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
+{
+ unsigned long irq_flags;
+ struct xpc_partition_uv *part_uv = &part->sn.uv;
+
+ /*
+ * !!! Make our side think that the remote parition sent an activate
+ * !!! message our way by doing what the activate IRQ handler would
+ * !!! do had one really been sent.
+ */
+
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = act_state_req;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
+ size_t *len)
+{
+ /* !!! call the UV version of sn_partition_reserved_page_pa() */
+ return xpUnsupported;
+}
+
+static int
+xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+{
+ rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv);
+ return 0;
+}
+
+static void
+xpc_send_heartbeat_uv(int msg_type)
+{
+ short partid;
+ struct xpc_partition *part;
+ struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+
+ /*
+ * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
+ * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
+ * !!! seconds. This is an increase in numalink traffic.
+ * ??? Is this good?
+ */
+
+ msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
+
+ partid = find_first_bit(xpc_heartbeating_to_mask_uv,
+ XP_MAX_NPARTITIONS_UV);
+
+ while (partid < XP_MAX_NPARTITIONS_UV) {
+ part = &xpc_partitions[partid];
+
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ msg_type);
+
+ partid = find_next_bit(xpc_heartbeating_to_mask_uv,
+ XP_MAX_NPARTITIONS_UV, partid + 1);
+ }
+}
+
+static void
+xpc_increment_heartbeat_uv(void)
+{
+ xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+}
+
+static void
+xpc_offline_heartbeat_uv(void)
+{
+ xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_online_heartbeat_uv(void)
+{
+ xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_heartbeat_init_uv(void)
+{
+ atomic64_set(&xpc_heartbeat_uv, 0);
+ bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+ xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+}
+
+static void
+xpc_heartbeat_exit_uv(void)
+{
+ xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
+{
+ struct xpc_partition_uv *part_uv = &part->sn.uv;
+ enum xp_retval ret = xpNoHeartbeat;
+
+ if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
+ part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+
+ if (part_uv->heartbeat != part->last_heartbeat ||
+ (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+
+ part->last_heartbeat = part_uv->heartbeat;
+ ret = xpSuccess;
+ }
+ }
+ return ret;
+}
+
+static void
+xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
+ unsigned long remote_rp_gpa, int nasid)
+{
+ short partid = remote_rp->SAL_partid;
+ struct xpc_partition *part = &xpc_partitions[partid];
+ struct xpc_activate_mq_msg_activate_req_uv msg;
+
+ part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
+ part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+ part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa;
+
+ /*
+ * ??? Is it a good idea to make this conditional on what is
+ * ??? potentially stale state information?
+ */
+ if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
+ msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+ msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa;
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
+ }
+
+ if (part->act_state == XPC_P_AS_INACTIVE)
+ xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_reactivation_uv(struct xpc_partition *part)
+{
+ xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_deactivation_uv(struct xpc_partition *part)
+{
+ struct xpc_activate_mq_msg_deactivate_req_uv msg;
+
+ /*
+ * ??? Is it a good idea to make this conditional on what is
+ * ??? potentially stale state information?
+ */
+ if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING &&
+ part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) {
+
+ msg.reason = part->reason;
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV);
+ }
+}
+
+static void
+xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part)
+{
+ /* nothing needs to be done */
+ return;
+}
+
+static void
+xpc_init_fifo_uv(struct xpc_fifo_head_uv *head)
+{
+ head->first = NULL;
+ head->last = NULL;
+ spin_lock_init(&head->lock);
+ head->n_entries = 0;
+}
+
+static void *
+xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head)
+{
+ unsigned long irq_flags;
+ struct xpc_fifo_entry_uv *first;
+
+ spin_lock_irqsave(&head->lock, irq_flags);
+ first = head->first;
+ if (head->first != NULL) {
+ head->first = first->next;
+ if (head->first == NULL)
+ head->last = NULL;
+ }
+ head->n_entries++;
+ spin_unlock_irqrestore(&head->lock, irq_flags);
+ first->next = NULL;
+ return first;
+}
+
+static void
+xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head,
+ struct xpc_fifo_entry_uv *last)
+{
+ unsigned long irq_flags;
+
+ last->next = NULL;
+ spin_lock_irqsave(&head->lock, irq_flags);
+ if (head->last != NULL)
+ head->last->next = last;
+ else
+ head->first = last;
+ head->last = last;
+ head->n_entries--;
+ BUG_ON(head->n_entries < 0);
+ spin_unlock_irqrestore(&head->lock, irq_flags);
+}
+
+static int
+xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
+{
+ return head->n_entries;
+}
+
+/*
+ * Setup the channel structures that are uv specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+{
+ struct xpc_channel_uv *ch_uv;
+ int ch_number;
+
+ for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+ ch_uv = &part->channels[ch_number].sn.uv;
+
+ xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+ xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+ }
+
+ return xpSuccess;
+}
+
+/*
+ * Teardown the channel structures that are uv specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+{
+ /* nothing needs to be done */
+ return;
+}
+
+static enum xp_retval
+xpc_make_first_contact_uv(struct xpc_partition *part)
+{
+ struct xpc_activate_mq_msg_uv msg;
+
+ /*
+ * We send a sync msg to get the remote partition's remote_act_state
+ * updated to our current act_state which at this point should
+ * be XPC_P_AS_ACTIVATING.
+ */
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
+
+ while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+
+ dev_dbg(xpc_part, "waiting to make first contact with "
+ "partition %d\n", XPC_PARTID(part));
+
+ /* wait a 1/4 of a second or so */
+ (void)msleep_interruptible(250);
+
+ if (part->act_state == XPC_P_AS_DEACTIVATING)
+ return part->reason;
+ }
+
+ return xpSuccess;
+}
+
+static u64
+xpc_get_chctl_all_flags_uv(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ union xpc_channel_ctl_flags chctl;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ chctl = part->chctl;
+ if (chctl.all_flags != 0)
+ part->chctl.all_flags = 0;
+
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+ return chctl.all_flags;
+}
+
+static enum xp_retval
+xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch)
+{
+ struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+ struct xpc_send_msg_slot_uv *msg_slot;
+ unsigned long irq_flags;
+ int nentries;
+ int entry;
+ size_t nbytes;
+
+ for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+ nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv);
+ ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+ if (ch_uv->send_msg_slots == NULL)
+ continue;
+
+ for (entry = 0; entry < nentries; entry++) {
+ msg_slot = &ch_uv->send_msg_slots[entry];
+
+ msg_slot->msg_slot_number = entry;
+ xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list,
+ &msg_slot->next);
+ }
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (nentries < ch->local_nentries)
+ ch->local_nentries = nentries;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return xpSuccess;
+ }
+
+ return xpNoMemory;
+}
+
+static enum xp_retval
+xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
+{
+ struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+ struct xpc_notify_mq_msg_uv *msg_slot;
+ unsigned long irq_flags;
+ int nentries;
+ int entry;
+ size_t nbytes;
+
+ for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+ nbytes = nentries * ch->entry_size;
+ ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+ if (ch_uv->recv_msg_slots == NULL)
+ continue;
+
+ for (entry = 0; entry < nentries; entry++) {
+ msg_slot = ch_uv->recv_msg_slots + entry *
+ ch->entry_size;
+
+ msg_slot->hdr.msg_slot_number = entry;
+ }
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (nentries < ch->remote_nentries)
+ ch->remote_nentries = nentries;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return xpSuccess;
+ }
+
+ return xpNoMemory;
+}
+
+/*
+ * Allocate msg_slots associated with the channel.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_uv(struct xpc_channel *ch)
+{
+ static enum xp_retval ret;
+ struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+ DBUG_ON(ch->flags & XPC_C_SETUP);
+
+ ret = xpc_allocate_send_msg_slot_uv(ch);
+ if (ret == xpSuccess) {
+
+ ret = xpc_allocate_recv_msg_slot_uv(ch);
+ if (ret != xpSuccess) {
+ kfree(ch_uv->send_msg_slots);
+ xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+ }
+ }
+ return ret;
+}
+
+/*
+ * Free up msg_slots and clear other stuff that were setup for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
+{
+ struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+ DBUG_ON(!spin_is_locked(&ch->lock));
+
+ ch_uv->remote_notify_mq_gpa = 0;
+
+ if (ch->flags & XPC_C_SETUP) {
+ xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+ kfree(ch_uv->send_msg_slots);
+ xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+ kfree(ch_uv->recv_msg_slots);
+ }
+}
+
+static void
+xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_closerequest_uv msg;
+
+ msg.ch_number = ch->number;
+ msg.reason = ch->reason;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_closereply_uv msg;
+
+ msg.ch_number = ch->number;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV);
+}
+
+static void
+xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_openrequest_uv msg;
+
+ msg.ch_number = ch->number;
+ msg.entry_size = ch->entry_size;
+ msg.local_nentries = ch->local_nentries;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_openreply_uv msg;
+
+ msg.ch_number = ch->number;
+ msg.local_nentries = ch->local_nentries;
+ msg.remote_nentries = ch->remote_nentries;
+ msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv);
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch,
+ unsigned long msgqueue_pa)
+{
+ ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa;
+}
+
+static void
+xpc_indicate_partition_engaged_uv(struct xpc_partition *part)
+{
+ struct xpc_activate_mq_msg_uv msg;
+
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV);
+}
+
+static void
+xpc_indicate_partition_disengaged_uv(struct xpc_partition *part)
+{
+ struct xpc_activate_mq_msg_uv msg;
+
+ xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV);
+}
+
+static void
+xpc_assume_partition_disengaged_uv(short partid)
+{
+ struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ part_uv->flags &= ~XPC_P_ENGAGED_UV;
+ spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+}
+
+static int
+xpc_partition_engaged_uv(short partid)
+{
+ return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0;
+}
+
+static int
+xpc_any_partition_engaged_uv(void)
+{
+ struct xpc_partition_uv *part_uv;
+ short partid;
+
+ for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+ part_uv = &xpc_partitions[partid].sn.uv;
+ if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0)
+ return 1;
+ }
+ return 0;
+}
+
+static enum xp_retval
+xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags,
+ struct xpc_send_msg_slot_uv **address_of_msg_slot)
+{
+ enum xp_retval ret;
+ struct xpc_send_msg_slot_uv *msg_slot;
+ struct xpc_fifo_entry_uv *entry;
+
+ while (1) {
+ entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list);
+ if (entry != NULL)
+ break;
+
+ if (flags & XPC_NOWAIT)
+ return xpNoWait;
+
+ ret = xpc_allocate_msg_wait(ch);
+ if (ret != xpInterrupted && ret != xpTimeout)
+ return ret;
+ }
+
+ msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next);
+ *address_of_msg_slot = msg_slot;
+ return xpSuccess;
+}
+
+static void
+xpc_free_msg_slot_uv(struct xpc_channel *ch,
+ struct xpc_send_msg_slot_uv *msg_slot)
+{
+ xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next);
+
+ /* wakeup anyone waiting for a free msg slot */
+ if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+ wake_up(&ch->msg_allocate_wq);
+}
+
+static void
+xpc_notify_sender_uv(struct xpc_channel *ch,
+ struct xpc_send_msg_slot_uv *msg_slot,
+ enum xp_retval reason)
+{
+ xpc_notify_func func = msg_slot->func;
+
+ if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) {
+
+ atomic_dec(&ch->n_to_notify);
+
+ dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p "
+ "msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+ msg_slot->msg_slot_number, ch->partid, ch->number);
+
+ func(reason, ch->partid, ch->number, msg_slot->key);
+
+ dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p "
+ "msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+ msg_slot->msg_slot_number, ch->partid, ch->number);
+ }
+}
+
+static void
+xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch,
+ struct xpc_notify_mq_msg_uv *msg)
+{
+ struct xpc_send_msg_slot_uv *msg_slot;
+ int entry = msg->hdr.msg_slot_number % ch->local_nentries;
+
+ msg_slot = &ch->sn.uv.send_msg_slots[entry];
+
+ BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number);
+ msg_slot->msg_slot_number += ch->local_nentries;
+
+ if (msg_slot->func != NULL)
+ xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered);
+
+ xpc_free_msg_slot_uv(ch, msg_slot);
+}
+
+static void
+xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
+ struct xpc_notify_mq_msg_uv *msg)
+{
+ struct xpc_partition_uv *part_uv = &part->sn.uv;
+ struct xpc_channel *ch;
+ struct xpc_channel_uv *ch_uv;
+ struct xpc_notify_mq_msg_uv *msg_slot;
+ unsigned long irq_flags;
+ int ch_number = msg->hdr.ch_number;
+
+ if (unlikely(ch_number >= part->nchannels)) {
+ dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid "
+ "channel number=0x%x in message from partid=%d\n",
+ ch_number, XPC_PARTID(part));
+
+ /* get hb checker to deactivate from the remote partition */
+ spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+ if (part_uv->act_state_req == 0)
+ xpc_activate_IRQ_rcvd++;
+ part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+ part_uv->reason = xpBadChannelNumber;
+ spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+ return;
+ }
+
+ ch = &part->channels[ch_number];
+ xpc_msgqueue_ref(ch);
+
+ if (!(ch->flags & XPC_C_CONNECTED)) {
+ xpc_msgqueue_deref(ch);
+ return;
+ }
+
+ /* see if we're really dealing with an ACK for a previously sent msg */
+ if (msg->hdr.size == 0) {
+ xpc_handle_notify_mq_ack_uv(ch, msg);
+ xpc_msgqueue_deref(ch);
+ return;
+ }
+
+ /* we're dealing with a normal message sent via the notify_mq */
+ ch_uv = &ch->sn.uv;
+
+ msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
+ (msg->hdr.msg_slot_number % ch->remote_nentries) *
+ ch->entry_size);
+
+ BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+ BUG_ON(msg_slot->hdr.size != 0);
+
+ memcpy(msg_slot, msg, msg->hdr.size);
+
+ xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next);
+
+ if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
+ /*
+ * If there is an existing idle kthread get it to deliver
+ * the payload, otherwise we'll have to get the channel mgr
+ * for this partition to create a kthread to do the delivery.
+ */
+ if (atomic_read(&ch->kthreads_idle) > 0)
+ wake_up_nr(&ch->idle_wq, 1);
+ else
+ xpc_send_chctl_local_msgrequest_uv(part, ch->number);
+ }
+ xpc_msgqueue_deref(ch);
+}
+
+static irqreturn_t
+xpc_handle_notify_IRQ_uv(int irq, void *dev_id)
+{
+ struct xpc_notify_mq_msg_uv *msg;
+ short partid;
+ struct xpc_partition *part;
+
+ while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) {
+
+ partid = msg->hdr.partid;
+ if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+ dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received "
+ "invalid partid=0x%x in message\n", partid);
+ } else {
+ part = &xpc_partitions[partid];
+
+ if (xpc_part_ref(part)) {
+ xpc_handle_notify_mq_msg_uv(part, msg);
+ xpc_part_deref(part);
+ }
+ }
+
+ gru_free_message(xpc_notify_mq_uv, msg);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int
+xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch)
+{
+ return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list);
+}
+
+static void
+xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number)
+{
+ struct xpc_channel *ch = &part->channels[ch_number];
+ int ndeliverable_payloads;
+
+ xpc_msgqueue_ref(ch);
+
+ ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch);
+
+ if (ndeliverable_payloads > 0 &&
+ (ch->flags & XPC_C_CONNECTED) &&
+ (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) {
+
+ xpc_activate_kthreads(ch, ndeliverable_payloads);
+ }
+
+ xpc_msgqueue_deref(ch);
+}
+
+static enum xp_retval
+xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
+ u16 payload_size, u8 notify_type, xpc_notify_func func,
+ void *key)
+{
+ enum xp_retval ret = xpSuccess;
+ struct xpc_send_msg_slot_uv *msg_slot = NULL;
+ struct xpc_notify_mq_msg_uv *msg;
+ u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV];
+ size_t msg_size;
+
+ DBUG_ON(notify_type != XPC_N_CALL);
+
+ msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size;
+ if (msg_size > ch->entry_size)
+ return xpPayloadTooBig;
+
+ xpc_msgqueue_ref(ch);
+
+ if (ch->flags & XPC_C_DISCONNECTING) {
+ ret = ch->reason;
+ goto out_1;
+ }
+ if (!(ch->flags & XPC_C_CONNECTED)) {
+ ret = xpNotConnected;
+ goto out_1;
+ }
+
+ ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot);
+ if (ret != xpSuccess)
+ goto out_1;
+
+ if (func != NULL) {
+ atomic_inc(&ch->n_to_notify);
+
+ msg_slot->key = key;
+ wmb(); /* a non-NULL func must hit memory after the key */
+ msg_slot->func = func;
+
+ if (ch->flags & XPC_C_DISCONNECTING) {
+ ret = ch->reason;
+ goto out_2;
+ }
+ }
+
+ msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer;
+ msg->hdr.partid = xp_partition_id;
+ msg->hdr.ch_number = ch->number;
+ msg->hdr.size = msg_size;
+ msg->hdr.msg_slot_number = msg_slot->msg_slot_number;
+ memcpy(&msg->payload, payload, payload_size);
+
+ ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size);
+ if (ret == xpSuccess)
+ goto out_1;
+
+ XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+out_2:
+ if (func != NULL) {
+ /*
+ * Try to NULL the msg_slot's func field. If we fail, then
+ * xpc_notify_senders_of_disconnect_uv() beat us to it, in which
+ * case we need to pretend we succeeded to send the message
+ * since the user will get a callout for the disconnect error
+ * by xpc_notify_senders_of_disconnect_uv(), and to also get an
+ * error returned here will confuse them. Additionally, since
+ * in this case the channel is being disconnected we don't need
+ * to put the the msg_slot back on the free list.
+ */
+ if (cmpxchg(&msg_slot->func, func, NULL) != func) {
+ ret = xpSuccess;
+ goto out_1;
+ }
+
+ msg_slot->key = NULL;
+ atomic_dec(&ch->n_to_notify);
+ }
+ xpc_free_msg_slot_uv(ch, msg_slot);
+out_1:
+ xpc_msgqueue_deref(ch);
+ return ret;
+}
+
+/*
+ * Tell the callers of xpc_send_notify() that the status of their payloads
+ * is unknown because the channel is now disconnecting.
+ *
+ * We don't worry about putting these msg_slots on the free list since the
+ * msg_slots themselves are about to be kfree'd.
+ */
+static void
+xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch)
+{
+ struct xpc_send_msg_slot_uv *msg_slot;
+ int entry;
+
+ DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING));
+
+ for (entry = 0; entry < ch->local_nentries; entry++) {
+
+ if (atomic_read(&ch->n_to_notify) == 0)
+ break;
+
+ msg_slot = &ch->sn.uv.send_msg_slots[entry];
+ if (msg_slot->func != NULL)
+ xpc_notify_sender_uv(ch, msg_slot, ch->reason);
+ }
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_uv(struct xpc_channel *ch)
+{
+ struct xpc_fifo_entry_uv *entry;
+ struct xpc_notify_mq_msg_uv *msg;
+ void *payload = NULL;
+
+ if (!(ch->flags & XPC_C_DISCONNECTING)) {
+ entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list);
+ if (entry != NULL) {
+ msg = container_of(entry, struct xpc_notify_mq_msg_uv,
+ hdr.u.next);
+ payload = &msg->payload;
+ }
+ }
+ return payload;
+}
+
+static void
+xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
+{
+ struct xpc_notify_mq_msg_uv *msg;
+ enum xp_retval ret;
+
+ msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload);
+
+ /* return an ACK to the sender of this message */
+
+ msg->hdr.partid = xp_partition_id;
+ msg->hdr.size = 0; /* size of zero indicates this is an ACK */
+
+ ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg,
+ sizeof(struct xpc_notify_mq_msghdr_uv));
+ if (ret != xpSuccess)
+ XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+
+ msg->hdr.msg_slot_number += ch->remote_nentries;
+}
+
+int
+xpc_init_uv(void)
+{
+ xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
+ xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
+ xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
+ xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+ xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
+ xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
+ xpc_online_heartbeat = xpc_online_heartbeat_uv;
+ xpc_heartbeat_init = xpc_heartbeat_init_uv;
+ xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
+ xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
+
+ xpc_request_partition_activation = xpc_request_partition_activation_uv;
+ xpc_request_partition_reactivation =
+ xpc_request_partition_reactivation_uv;
+ xpc_request_partition_deactivation =
+ xpc_request_partition_deactivation_uv;
+ xpc_cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_uv;
+
+ xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
+ xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
+
+ xpc_make_first_contact = xpc_make_first_contact_uv;
+
+ xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
+ xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
+ xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
+ xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
+ xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+
+ xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
+
+ xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
+ xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
+
+ xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
+ xpc_indicate_partition_disengaged =
+ xpc_indicate_partition_disengaged_uv;
+ xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
+ xpc_partition_engaged = xpc_partition_engaged_uv;
+ xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
+
+ xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
+ xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
+ xpc_send_payload = xpc_send_payload_uv;
+ xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
+ xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
+ xpc_received_payload = xpc_received_payload_uv;
+
+ if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
+ dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
+ XPC_MSG_HDR_MAX_SIZE);
+ return -E2BIG;
+ }
+
+ /* ??? The cpuid argument's value is 0, is that what we want? */
+ /* !!! The irq argument's value isn't correct. */
+ xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0,
+ xpc_handle_activate_IRQ_uv);
+ if (xpc_activate_mq_uv == NULL)
+ return -ENOMEM;
+
+ /* ??? The cpuid argument's value is 0, is that what we want? */
+ /* !!! The irq argument's value isn't correct. */
+ xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0,
+ xpc_handle_notify_IRQ_uv);
+ if (xpc_notify_mq_uv == NULL) {
+ /* !!! The irq argument's value isn't correct. */
+ xpc_destroy_gru_mq_uv(xpc_activate_mq_uv,
+ XPC_ACTIVATE_MQ_SIZE_UV, 0);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void
+xpc_exit_uv(void)
+{
+ /* !!! The irq argument's value isn't correct. */
+ xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0);
+
+ /* !!! The irq argument's value isn't correct. */
+ xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0);
+}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 822dc8e..71513b3a 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -21,21 +21,8 @@
*/
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/atomic.h>
#include "xp.h"
/*
@@ -57,7 +44,7 @@
u16 version; /* Version for this message */
u16 embedded_bytes; /* #of bytes embedded in XPC message */
u32 magic; /* Special number indicating this is xpnet */
- u64 buf_pa; /* phys address of buffer to retrieve */
+ unsigned long buf_pa; /* phys address of buffer to retrieve */
u32 size; /* #of bytes in buffer */
u8 leadin_ignore; /* #of bytes to ignore at the beginning */
u8 tailout_ignore; /* #of bytes to ignore at the end */
@@ -70,11 +57,10 @@
*
* XPC expects each message to exist in an individual cacheline.
*/
-#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
+#define XPNET_MSG_SIZE XPC_MSG_PAYLOAD_MAX_SIZE
#define XPNET_MSG_DATA_MAX \
- (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
-#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
-#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
+ (XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPC_MSG_MAX_SIZE)
#define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
#define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
@@ -105,7 +91,6 @@
* then be released.
*/
struct xpnet_pending_msg {
- struct list_head free_list;
struct sk_buff *skb;
atomic_t use_count;
};
@@ -121,7 +106,7 @@
* When we are notified of other partitions activating, we add them to
* our bitmask of partitions to which we broadcast.
*/
-static u64 xpnet_broadcast_partitions;
+static unsigned long *xpnet_broadcast_partitions;
/* protect above */
static DEFINE_SPINLOCK(xpnet_broadcast_lock);
@@ -141,16 +126,13 @@
#define XPNET_DEF_MTU (0x8000UL)
/*
- * The partition id is encapsulated in the MAC address. The following
- * define locates the octet the partid is in.
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
*/
-#define XPNET_PARTID_OCTET 1
-#define XPNET_LICENSE_OCTET 2
+#define XPNET_PARTID_OCTET 2
-/*
- * Define the XPNET debug device structure that is to be used with dev_dbg(),
- * dev_err(), dev_warn(), and dev_info().
- */
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
+
struct device_driver xpnet_dbg_name = {
.name = "xpnet"
};
@@ -169,7 +151,8 @@
xpnet_receive(short partid, int channel, struct xpnet_message *msg)
{
struct sk_buff *skb;
- bte_result_t bret;
+ void *dst;
+ enum xp_retval ret;
struct xpnet_dev_private *priv =
(struct xpnet_dev_private *)xpnet_device->priv;
@@ -201,7 +184,7 @@
/*
* The allocated skb has some reserved space.
- * In order to use bte_copy, we need to get the
+ * In order to use xp_remote_memcpy(), we need to get the
* skb->data pointer moved forward.
*/
skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
@@ -226,26 +209,21 @@
skb_copy_to_linear_data(skb, &msg->data,
(size_t)msg->embedded_bytes);
} else {
+ dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
- "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
- (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
- msg->size);
+ "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+ (void *)msg->buf_pa, msg->size);
- bret = bte_copy(msg->buf_pa,
- __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
- msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-
- if (bret != BTE_SUCCESS) {
+ ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+ if (ret != xpSuccess) {
/*
- * >>> Need better way of cleaning skb. Currently skb
- * >>> appears in_use and we can't just call
- * >>> dev_kfree_skb.
+ * !!! Need better way of cleaning skb. Currently skb
+ * !!! appears in_use and we can't just call
+ * !!! dev_kfree_skb.
*/
- dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
- "error=0x%x\n", (void *)msg->buf_pa,
- (void *)__pa((u64)skb->data &
- ~(L1_CACHE_BYTES - 1)),
- msg->size, bret);
+ dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+ "returned error=0x%x\n", dst,
+ (void *)msg->buf_pa, msg->size, ret);
xpc_received(partid, channel, (void *)msg);
@@ -285,9 +263,7 @@
xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
void *data, void *key)
{
- long bp;
-
- DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
DBUG_ON(channel != XPC_NET_CHANNEL);
switch (reason) {
@@ -299,31 +275,28 @@
case xpConnected: /* connection completed to a partition */
spin_lock_bh(&xpnet_broadcast_lock);
- xpnet_broadcast_partitions |= 1UL << (partid - 1);
- bp = xpnet_broadcast_partitions;
+ __set_bit(partid, xpnet_broadcast_partitions);
spin_unlock_bh(&xpnet_broadcast_lock);
netif_carrier_on(xpnet_device);
- dev_dbg(xpnet, "%s connection created to partition %d; "
- "xpnet_broadcast_partitions=0x%lx\n",
- xpnet_device->name, partid, bp);
+ dev_dbg(xpnet, "%s connected to partition %d\n",
+ xpnet_device->name, partid);
break;
default:
spin_lock_bh(&xpnet_broadcast_lock);
- xpnet_broadcast_partitions &= ~(1UL << (partid - 1));
- bp = xpnet_broadcast_partitions;
+ __clear_bit(partid, xpnet_broadcast_partitions);
spin_unlock_bh(&xpnet_broadcast_lock);
- if (bp == 0)
+ if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+ xp_max_npartitions)) {
netif_carrier_off(xpnet_device);
+ }
- dev_dbg(xpnet, "%s disconnected from partition %d; "
- "xpnet_broadcast_partitions=0x%lx\n",
- xpnet_device->name, partid, bp);
+ dev_dbg(xpnet, "%s disconnected from partition %d\n",
+ xpnet_device->name, partid);
break;
-
}
}
@@ -334,8 +307,10 @@
dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
- XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
- XPNET_MAX_IDLE_KTHREADS);
+ (unsigned long)XPNET_MSG_SIZE,
+ (unsigned long)XPNET_MSG_NENTRIES,
+ (unsigned long)XPNET_MAX_KTHREADS,
+ (unsigned long)XPNET_MAX_IDLE_KTHREADS);
ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
@@ -426,35 +401,74 @@
}
}
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+ u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+ u8 msg_buffer[XPNET_MSG_SIZE];
+ struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+ u16 msg_size = sizeof(struct xpnet_message);
+ enum xp_retval ret;
+
+ msg->embedded_bytes = embedded_bytes;
+ if (unlikely(embedded_bytes != 0)) {
+ msg->version = XPNET_VERSION_EMBED;
+ dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+ &msg->data, skb->data, (size_t)embedded_bytes);
+ skb_copy_from_linear_data(skb, &msg->data,
+ (size_t)embedded_bytes);
+ msg_size += embedded_bytes - 1;
+ } else {
+ msg->version = XPNET_VERSION;
+ }
+ msg->magic = XPNET_MAGIC;
+ msg->size = end_addr - start_addr;
+ msg->leadin_ignore = (u64)skb->data - start_addr;
+ msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+ msg->buf_pa = xp_pa((void *)start_addr);
+
+ dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+ KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+ "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+ dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+ msg->leadin_ignore, msg->tailout_ignore);
+
+ atomic_inc(&queued_msg->use_count);
+
+ ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+ msg_size, xpnet_send_completed, queued_msg);
+ if (unlikely(ret != xpSuccess))
+ atomic_dec(&queued_msg->use_count);
+}
+
/*
* Network layer has formatted a packet (skb) and is ready to place it
* "on the wire". Prepare and send an xpnet_message to all partitions
* which have connected with us and are targets of this packet.
*
* MAC-NOTE: For the XPNET driver, the MAC address contains the
- * destination partition_id. If the destination partition id word
- * is 0xff, this packet is to broadcast to all partitions.
+ * destination partid. If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
*/
static int
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xpnet_pending_msg *queued_msg;
- enum xp_retval ret;
- struct xpnet_message *msg;
u64 start_addr, end_addr;
- long dp;
- u8 second_mac_octet;
short dest_partid;
- struct xpnet_dev_private *priv;
- u16 embedded_bytes;
-
- priv = (struct xpnet_dev_private *)dev->priv;
+ struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv;
+ u16 embedded_bytes = 0;
dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n", (void *)skb->head,
(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
skb->len);
+ if (skb->data[0] == 0x33) {
+ dev_kfree_skb(skb);
+ return 0; /* nothing needed to be done */
+ }
+
/*
* The xpnet_pending_msg tracks how many outstanding
* xpc_send_notifies are relying on this skb. When none
@@ -466,7 +480,6 @@
"packet\n", sizeof(struct xpnet_pending_msg));
priv->stats.tx_errors++;
-
return -ENOMEM;
}
@@ -475,7 +488,6 @@
end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
/* calculate how many bytes to embed in the XPC message */
- embedded_bytes = 0;
if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
/* skb->data does fit so embed */
embedded_bytes = skb->len;
@@ -491,82 +503,28 @@
atomic_set(&queued_msg->use_count, 1);
queued_msg->skb = skb;
- second_mac_octet = skb->data[XPNET_PARTID_OCTET];
- if (second_mac_octet == 0xff) {
+ if (skb->data[0] == 0xff) {
/* we are being asked to broadcast to all partitions */
- dp = xpnet_broadcast_partitions;
- } else if (second_mac_octet != 0) {
- dp = xpnet_broadcast_partitions &
- (1UL << (second_mac_octet - 1));
+ for_each_bit(dest_partid, xpnet_broadcast_partitions,
+ xp_max_npartitions) {
+
+ xpnet_send(skb, queued_msg, start_addr, end_addr,
+ embedded_bytes, dest_partid);
+ }
} else {
- /* 0 is an invalid partid. Ignore */
- dp = 0;
- }
- dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
+ dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+ dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
- /*
- * If we wanted to allow promiscuous mode to work like an
- * unswitched network, this would be a good point to OR in a
- * mask of partitions which should be receiving all packets.
- */
+ if (dest_partid >= 0 &&
+ dest_partid < xp_max_npartitions &&
+ test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
- /*
- * Main send loop.
- */
- for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
- dest_partid++) {
-
- if (!(dp & (1UL << (dest_partid - 1)))) {
- /* not destined for this partition */
- continue;
- }
-
- /* remove this partition from the destinations mask */
- dp &= ~(1UL << (dest_partid - 1));
-
- /* found a partition to send to */
-
- ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
- XPC_NOWAIT, (void **)&msg);
- if (unlikely(ret != xpSuccess))
- continue;
-
- msg->embedded_bytes = embedded_bytes;
- if (unlikely(embedded_bytes != 0)) {
- msg->version = XPNET_VERSION_EMBED;
- dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
- &msg->data, skb->data, (size_t)embedded_bytes);
- skb_copy_from_linear_data(skb, &msg->data,
- (size_t)embedded_bytes);
- } else {
- msg->version = XPNET_VERSION;
- }
- msg->magic = XPNET_MAGIC;
- msg->size = end_addr - start_addr;
- msg->leadin_ignore = (u64)skb->data - start_addr;
- msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
- msg->buf_pa = __pa(start_addr);
-
- dev_dbg(xpnet, "sending XPC message to %d:%d\n"
- KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
- "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
- dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
- msg->leadin_ignore, msg->tailout_ignore);
-
- atomic_inc(&queued_msg->use_count);
-
- ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
- xpnet_send_completed, queued_msg);
- if (unlikely(ret != xpSuccess)) {
- atomic_dec(&queued_msg->use_count);
- continue;
+ xpnet_send(skb, queued_msg, start_addr, end_addr,
+ embedded_bytes, dest_partid);
}
}
if (atomic_dec_return(&queued_msg->use_count) == 0) {
- dev_dbg(xpnet, "no partitions to receive packet destined for "
- "%d\n", dest_partid);
-
dev_kfree_skb(skb);
kfree(queued_msg);
}
@@ -594,23 +552,28 @@
static int __init
xpnet_init(void)
{
- int i;
- u32 license_num;
- int result = -ENOMEM;
+ int result;
- if (!ia64_platform_is("sn2"))
+ if (!is_shub() && !is_uv())
return -ENODEV;
dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
+ xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) *
+ sizeof(long), GFP_KERNEL);
+ if (xpnet_broadcast_partitions == NULL)
+ return -ENOMEM;
+
/*
* use ether_setup() to init the majority of our device
* structure and then override the necessary pieces.
*/
xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
XPNET_DEVICE_NAME, ether_setup);
- if (xpnet_device == NULL)
+ if (xpnet_device == NULL) {
+ kfree(xpnet_broadcast_partitions);
return -ENOMEM;
+ }
netif_carrier_off(xpnet_device);
@@ -628,14 +591,10 @@
* MAC addresses. We chose the first octet of the MAC to be unlikely
* to collide with any vendor's officially issued MAC.
*/
- xpnet_device->dev_addr[0] = 0xfe;
- xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
- license_num = sn_partition_serial_number_val();
- for (i = 3; i >= 0; i--) {
- xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
- license_num & 0xff;
- license_num = license_num >> 8;
- }
+ xpnet_device->dev_addr[0] = 0x02; /* locally administered, no OUI */
+
+ xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+ xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
/*
* ether_setup() sets this to a multicast device. We are
@@ -651,8 +610,10 @@
xpnet_device->features = NETIF_F_NO_CSUM;
result = register_netdev(xpnet_device);
- if (result != 0)
+ if (result != 0) {
free_netdev(xpnet_device);
+ kfree(xpnet_broadcast_partitions);
+ }
return result;
}
@@ -666,8 +627,8 @@
xpnet_device[0].name);
unregister_netdev(xpnet_device);
-
free_netdev(xpnet_device);
+ kfree(xpnet_broadcast_partitions);
}
module_exit(xpnet_exit);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ee7d7b..e4765b7 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6417,7 +6417,7 @@
*class = CLASS_CODE_SCTP_IPV6;
break;
default:
- return -1;
+ return 0;
}
return 1;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6b2dee0..a834b52 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1024,7 +1024,7 @@
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
__u16 flags;
- unsigned int irqflag;
+ unsigned long irqflag;
int key_index, index_specified;
int ret = 0;
@@ -1097,7 +1097,7 @@
{
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
- unsigned int irqflag;
+ unsigned long irqflag;
unsigned int key_index, index_specified;
int ret = 0;
@@ -1215,7 +1215,7 @@
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
__u16 alg;
__u16 flags;
- unsigned int irqflag;
+ unsigned long irqflag;
int key_index;
int ret = 0;
@@ -1303,7 +1303,7 @@
struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
struct iw_point *enc = &data->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- unsigned int irqflag;
+ unsigned long irqflag;
int key_index;
int ret = 0;
int max_key_len;
@@ -1426,7 +1426,7 @@
{
struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
unsigned int len;
- unsigned int irqflag;
+ unsigned long irqflag;
int ret = 0;
pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@@ -1467,7 +1467,7 @@
{
struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
char *p;
- unsigned int irqflag;
+ unsigned long irqflag;
unsigned int i;
pr_debug("%s:<-\n", __func__);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index d9769c5..ff3fad7 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -43,7 +43,9 @@
#include <linux/version.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <linux/if.h>
+#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/cache.h>
#include <linux/pci.h>
@@ -471,9 +473,6 @@
/* Set private data */
pci_set_drvdata(pdev, hw);
- /* Enable msi for devices that support it */
- pci_enable_msi(pdev);
-
/* Setup interrupt handler */
ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (ret) {
@@ -551,7 +550,6 @@
err_irq:
free_irq(pdev->irq, sc);
err_free:
- pci_disable_msi(pdev);
ieee80211_free_hw(hw);
err_map:
pci_iounmap(pdev, mem);
@@ -573,7 +571,6 @@
ath5k_detach(pdev, hw);
ath5k_hw_detach(sc->ah);
free_irq(pdev->irq, sc);
- pci_disable_msi(pdev);
pci_iounmap(pdev, sc->iobase);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
@@ -590,6 +587,9 @@
ath5k_led_off(sc);
ath5k_stop_hw(sc);
+
+ free_irq(pdev->irq, sc);
+ pci_disable_msi(pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@@ -605,15 +605,12 @@
struct ath5k_hw *ah = sc->ah;
int i, err;
- err = pci_set_power_state(pdev, PCI_D0);
- if (err)
- return err;
+ pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err)
return err;
- pci_restore_state(pdev);
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -621,7 +618,17 @@
*/
pci_write_config_byte(pdev, 0x41, 0);
- ath5k_init(sc);
+ pci_enable_msi(pdev);
+
+ err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (err) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err_msi;
+ }
+
+ err = ath5k_init(sc);
+ if (err)
+ goto err_irq;
ath5k_led_enable(sc);
/*
@@ -635,6 +642,12 @@
ath5k_hw_reset_key(ah, i);
return 0;
+err_irq:
+ free_irq(pdev->irq, sc);
+err_msi:
+ pci_disable_msi(pdev);
+ pci_disable_device(pdev);
+ return err;
}
#endif /* CONFIG_PM */
@@ -1224,7 +1237,7 @@
pktlen = skb->len;
- if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
+ if (info->control.hw_key) {
keyidx = info->control.hw_key->hw_key_idx;
pktlen += info->control.icv_len;
}
@@ -1249,6 +1262,7 @@
txq->link = &ds->ds_link;
ath5k_hw_tx_start(ah, txq->qnum);
+ mmiowb();
spin_unlock_bh(&txq->lock);
return 0;
@@ -1583,7 +1597,6 @@
ath5k_hw_stop_pcu_recv(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
- mdelay(3); /* 3ms is long enough for 1 frame */
ath5k_debug_printrxbuffs(sc, ah);
@@ -1682,31 +1695,44 @@
struct ath5k_rx_status rs = {};
struct sk_buff *skb;
struct ath5k_softc *sc = (void *)data;
- struct ath5k_buf *bf;
+ struct ath5k_buf *bf, *bf_last;
struct ath5k_desc *ds;
int ret;
int hdrlen;
int pad;
spin_lock(&sc->rxbuflock);
+ if (list_empty(&sc->rxbuf)) {
+ ATH5K_WARN(sc, "empty rx buf pool\n");
+ goto unlock;
+ }
+ bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
do {
rxs.flag = 0;
- if (unlikely(list_empty(&sc->rxbuf))) {
- ATH5K_WARN(sc, "empty rx buf pool\n");
- break;
- }
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
BUG_ON(bf->skb == NULL);
skb = bf->skb;
ds = bf->desc;
- /* TODO only one segment */
- pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
- sc->desc_len, PCI_DMA_FROMDEVICE);
-
- if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
- break;
+ /*
+ * last buffer must not be freed to ensure proper hardware
+ * function. When the hardware finishes also a packet next to
+ * it, we are sure, it doesn't use it anymore and we can go on.
+ */
+ if (bf_last == bf)
+ bf->flags |= 1;
+ if (bf->flags) {
+ struct ath5k_buf *bf_next = list_entry(bf->list.next,
+ struct ath5k_buf, list);
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+ &rs);
+ if (ret)
+ break;
+ bf->flags &= ~1;
+ /* skip the overwritten one (even status is martian) */
+ goto next;
+ }
ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
if (unlikely(ret == -EINPROGRESS))
@@ -1752,8 +1778,6 @@
goto next;
}
accept:
- pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
- rs.rs_datalen, PCI_DMA_FROMDEVICE);
pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
PCI_DMA_FROMDEVICE);
bf->skb = NULL;
@@ -1816,6 +1840,7 @@
next:
list_move_tail(&bf->list, &sc->rxbuf);
} while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
spin_unlock(&sc->rxbuflock);
}
@@ -1840,9 +1865,6 @@
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
ds = bf->desc;
- /* TODO only one segment */
- pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
- sc->desc_len, PCI_DMA_FROMDEVICE);
ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
if (unlikely(ret == -EINPROGRESS))
break;
@@ -2015,8 +2037,6 @@
ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
/* NB: hw still stops DMA, so proceed */
}
- pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
- PCI_DMA_TODEVICE);
ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
ath5k_hw_tx_start(ah, sc->bhalq);
@@ -2240,6 +2260,7 @@
ret = 0;
done:
+ mmiowb();
mutex_unlock(&sc->lock);
return ret;
}
@@ -2272,6 +2293,7 @@
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
ath5k_led_off(sc);
ath5k_hw_set_intr(ah, 0);
+ synchronize_irq(sc->pdev->irq);
}
ath5k_txq_cleanup(sc);
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2321,9 +2343,13 @@
}
}
ath5k_txbuf_free(sc, sc->bbuf);
+ mmiowb();
mutex_unlock(&sc->lock);
del_timer_sync(&sc->calib_tim);
+ tasklet_kill(&sc->rxtq);
+ tasklet_kill(&sc->txtq);
+ tasklet_kill(&sc->restq);
return ret;
}
@@ -2550,8 +2576,6 @@
struct pci_dev *pdev = sc->pdev;
char name[ATH5K_LED_MAX_NAME_LEN + 1];
- sc->led_on = 0; /* active low */
-
/*
* Auto-enable soft led processing for IBM cards and for
* 5211 minipci cards.
@@ -2560,11 +2584,13 @@
pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
__set_bit(ATH_STAT_LEDSOFT, sc->status);
sc->led_pin = 0;
+ sc->led_on = 0; /* active low */
}
/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
__set_bit(ATH_STAT_LEDSOFT, sc->status);
sc->led_pin = 1;
+ sc->led_on = 1; /* active high */
}
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
goto out;
@@ -2783,6 +2809,7 @@
/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
* a clean way of letting us retrieve this yet. */
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ mmiowb();
}
if (conf->changed & IEEE80211_IFCC_BEACON &&
@@ -2971,6 +2998,7 @@
}
unlock:
+ mmiowb();
mutex_unlock(&sc->lock);
return ret;
}
@@ -3032,8 +3060,6 @@
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
- mutex_lock(&sc->lock);
-
if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
ret = -EIO;
goto end;
@@ -3044,11 +3070,12 @@
ret = ath5k_beacon_setup(sc, sc->bbuf);
if (ret)
sc->bbuf->skb = NULL;
- else
+ else {
ath5k_beacon_config(sc);
+ mmiowb();
+ }
end:
- mutex_unlock(&sc->lock);
return ret;
}
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 47f414b..d7e03e6 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -56,7 +56,7 @@
struct ath5k_buf {
struct list_head list;
- unsigned int flags; /* tx descriptor flags */
+ unsigned int flags; /* rx descriptor flags */
struct ath5k_desc *desc; /* virtual addr of desc */
dma_addr_t daddr; /* physical addr of desc */
struct sk_buff *skb; /* skbuff for buf */
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index c6d12c5..7ca87a5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -1440,6 +1440,7 @@
/* Stop queue */
ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
} else {
/*
* Schedule TX disable and wait until queue is empty
@@ -1456,6 +1457,8 @@
/* Clear register */
ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+ if (pending)
+ return -EBUSY;
}
/* TODO: Check for success else return error */
@@ -1716,6 +1719,7 @@
/* ..re-enable interrupts */
ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
return old_mask;
}
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e78319a..3bf3a86 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4645,8 +4645,7 @@
}
/* fill hw info */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_RX_INCLUDES_FCS |
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8d54502..9dda816 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -192,7 +192,7 @@
const struct b43_phy *phy = &dev->phy;
const struct ieee80211_hdr *wlhdr =
(const struct ieee80211_hdr *)fragment_data;
- int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+ int use_encryption = !!info->control.hw_key;
__le16 fctl = wlhdr->frame_control;
struct ieee80211_rate *fbrate;
u8 rate, rate_fb;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a1b8bf3..2541c81 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3702,8 +3702,7 @@
}
/* fill hw info */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_RX_INCLUDES_FCS |
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
hw->queues = 1; /* FIXME: hardware has more queues */
@@ -3846,10 +3845,10 @@
goto out;
}
}
- mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Device resumed.\n");
out:
+ mutex_unlock(&wl->mutex);
return err;
}
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index e969ed8..68e1f8c 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -192,7 +192,7 @@
u16 cookie)
{
const struct ieee80211_hdr *wlhdr;
- int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+ int use_encryption = !!info->control.hw_key;
u16 fctl;
u8 rate;
struct ieee80211_rate *rate_fb;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5bf9e00..c6f886e 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6442,6 +6442,7 @@
if (err) {
printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
dev->name);
+ mutex_unlock(&priv->action_mutex);
return err;
}
pci_restore_state(pci_dev);
@@ -7146,7 +7147,7 @@
err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
if (err) {
IPW_DEBUG_WX("failed querying ordinals.\n");
- return err;
+ goto done;
}
switch (val & TX_RATE_MASK) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index c2a7678..a51e0ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -630,7 +630,9 @@
struct ieee80211_rx_status *stats)
{
struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
+#ifdef CONFIG_IWL3945_LEDS
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+#endif
struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
short len = le16_to_cpu(rx_hdr->len);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a44188b..e3427c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -818,8 +818,7 @@
hw->rate_control_algorithm = "iwl-4965-rs";
/* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_SIGNAL_DBM |
+ hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 5838480..d6d729e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -68,12 +68,8 @@
#endif
#else
-static inline void IWL_DEBUG(int level, const char *fmt, ...)
-{
-}
-static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
-{
-}
+#define IWL_DEBUG(level, fmt, args...)
+#define IWL_DEBUG_LIMIT(level, fmt, args...)
#endif /* CONFIG_IWLWIFI_DEBUG */
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 899d7a2..61250e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -268,7 +268,9 @@
if (tpt < 0) /* wrapparound */
tpt = -tpt;
- IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
+ IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+ (long long)tpt,
+ (unsigned long long)current_tpt);
priv->led_tpt = current_tpt;
if (!priv->allow_blinking)
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index efc750d..5a00ac2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -270,6 +270,7 @@
static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
+#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
@@ -277,6 +278,7 @@
scan_notif->scanned_channels,
scan_notif->tsf_low,
scan_notif->tsf_high, scan_notif->status);
+#endif
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &priv->status);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9b50b10..f72cd0b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -906,7 +906,7 @@
* first entry */
iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
- if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ if (info->control.hw_key)
iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4a22d3f..7c82ecf 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2667,7 +2667,7 @@
* first entry */
iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
- if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ if (info->control.hw_key)
iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -7899,8 +7899,7 @@
priv->ibss_beacon = NULL;
/* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_SIGNAL_DBM |
+ hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
/* 4 EDCA QOS priorities */
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 6d0ff8d..3309a9c 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -48,7 +48,7 @@
if (ret)
return ret;
- return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
+ return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
}
/**
@@ -63,8 +63,8 @@
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%x", &datum);
- if (ret != 1)
+ ret = sscanf(buf, "%d", &datum);
+ if ((ret != 1) || (datum > 1))
return -EINVAL;
*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@@ -91,7 +91,7 @@
if (ret)
return ret;
- return snprintf(buf, 12, "0x%x\n", defs.boottime);
+ return snprintf(buf, 12, "%d\n", defs.boottime);
}
/**
@@ -106,8 +106,8 @@
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%x", &datum);
- if (ret != 1)
+ ret = sscanf(buf, "%d", &datum);
+ if ((ret != 1) || (datum > 255))
return -EINVAL;
/* A too small boot time will result in the device booting into
@@ -143,7 +143,7 @@
if (ret)
return ret;
- return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
+ return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
}
/**
@@ -154,11 +154,11 @@
{
struct lbs_private *priv = to_net_dev(dev)->priv;
struct cmd_ds_mesh_config cmd;
- uint16_t datum;
+ uint32_t datum;
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%hx", &datum);
+ ret = sscanf(buf, "%d", &datum);
if (ret != 1 || datum < 1 || datum > 11)
return -EINVAL;
@@ -274,8 +274,8 @@
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%x", &datum);
- if (ret != 1)
+ ret = sscanf(buf, "%d", &datum);
+ if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */
@@ -328,8 +328,8 @@
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%x", &datum);
- if (ret != 1)
+ ret = sscanf(buf, "%d", &datum);
+ if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */
@@ -382,8 +382,8 @@
int ret;
memset(&cmd, 0, sizeof(cmd));
- ret = sscanf(buf, "%x", &datum);
- if (ret != 1)
+ ret = sscanf(buf, "%d", &datum);
+ if ((ret != 1) || (datum > 255))
return -EINVAL;
/* fetch all other Information Element parameters */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5816230..248d31a 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -500,7 +500,7 @@
device_unregister(data->dev);
failed_drvdata:
ieee80211_free_hw(hw);
- hwsim_radios[i] = 0;
+ hwsim_radios[i] = NULL;
failed:
mac80211_hwsim_free();
return err;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb2..3078417 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1121,6 +1121,7 @@
int pipe = usb_sndbulkpipe(usb_dev, 1);
int length;
u16 reg;
+ u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1130,6 +1131,17 @@
skbdesc->desc = entry->skb->data;
/*
+ * Adjust the beacon databyte count. The current number is
+ * calculated before this function gets called, but falsely
+ * assumes that the descriptor was already present in the SKB.
+ */
+ rt2x00_desc_read(skbdesc->desc, 0, &word);
+ len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+ len += skbdesc->desc_len;
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+ rt2x00_desc_write(skbdesc->desc, 0, word);
+
+ /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1650,7 +1662,6 @@
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3..db2dc97 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
#define DIFS ( PIFS + SLOT_TIME )
#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS ( SIFS + DIFS + \
+ (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS ( SIFS + SHORT_DIFS + \
+ (8 * (IEEE80211_HEADER + ACK_SIZE)) )
/*
* Chipset identification
@@ -597,6 +600,7 @@
DEVICE_STARTED_SUSPEND,
DEVICE_ENABLED_RADIO,
DEVICE_DISABLED_RADIO_HW,
+ DEVICE_DIRTY_CONFIG,
/*
* Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca71..3f89516 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -271,7 +271,7 @@
libconf.sifs = SIFS;
libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
- libconf.eifs = EIFS;
+ libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
}
libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8..f42283a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@
rt2x00dev->intf_associated = 0;
__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+ __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
return 0;
}
@@ -1237,9 +1238,9 @@
/*
* Reconfigure device.
*/
- rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
- if (!rt2x00dev->hw->conf.radio_enabled)
- rt2x00lib_disable_radio(rt2x00dev);
+ retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+ if (retval)
+ goto exit;
/*
* Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e..c5fb3a7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa..c3ee4ec 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@
(struct ieee80211_rts *)(skb->data));
if (rt2x00queue_write_tx_frame(queue, skb)) {
+ dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
@@ -96,7 +97,6 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
enum data_queue_qid qid = skb_get_queue_mapping(skb);
- struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct data_queue *queue;
u16 frame_control;
@@ -152,18 +152,6 @@
}
}
- /*
- * XXX: This is as wrong as the old mac80211 code was,
- * due to beacons not getting sequence numbers assigned
- * properly.
- */
- if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
- intf->seqno += 0x10;
- ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
- }
-
if (rt2x00queue_write_tx_frame(queue, skb)) {
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_BUSY;
@@ -322,6 +310,7 @@
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
+ int force_reconfig;
/*
* Mac80211 might be calling this function while we are trying
@@ -341,7 +330,17 @@
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
}
- rt2x00lib_config(rt2x00dev, conf, 0);
+ /*
+ * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+ * been started and the configuration must be forced upon the hardware.
+ * Otherwise registers will not be intialized correctly and could
+ * result in non-working hardware because essential registers aren't
+ * initialized.
+ */
+ force_reconfig =
+ __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+ rt2x00lib_config(rt2x00dev, conf, force_reconfig);
/*
* Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f44203..3b27f6a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
struct ieee80211_rate *rate =
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -200,6 +201,31 @@
}
/*
+ * Hardware should insert sequence counter.
+ * FIXME: We insert a software sequence counter first for
+ * hardware that doesn't support hardware sequence counting.
+ *
+ * This is wrong because beacons are not getting sequence
+ * numbers assigned properly.
+ *
+ * A secondary problem exists for drivers that cannot toggle
+ * sequence counting per-frame, since those will override the
+ * sequence counter given by mac80211.
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ spin_lock(&intf->lock);
+
+ if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+ intf->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+ spin_unlock(&intf->lock);
+
+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+ }
+
+ /*
* PLCP setup
* Length calculation depends on OFDM/CCK rate.
*/
@@ -466,9 +492,12 @@
if (!rt2x00dev->ops->lib->init_rxentry)
return;
- for (i = 0; i < queue->limit; i++)
+ for (i = 0; i < queue->limit; i++) {
+ queue->entries[i].flags = 0;
+
rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
&queue->entries[i]);
+ }
}
void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +511,12 @@
if (!rt2x00dev->ops->lib->init_txentry)
continue;
- for (i = 0; i < queue->limit; i++)
+ for (i = 0; i < queue->limit; i++) {
+ queue->entries[i].flags = 0;
+
rt2x00dev->ops->lib->init_txentry(rt2x00dev,
&queue->entries[i]);
+ }
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945..a4a8c57 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -199,6 +199,7 @@
* @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
* @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
* @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
* @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
* @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
* @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@
ENTRY_TXD_RTS_FRAME,
ENTRY_TXD_CTS_FRAME,
ENTRY_TXD_OFDM_RATE,
+ ENTRY_TXD_GENERATE_SEQ,
ENTRY_TXD_FIRST_FRAGMENT,
ENTRY_TXD_MORE_FRAG,
ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7..933e6cc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@
}
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+ const u8 request, const u8 requesttype,
+ const u16 offset, void *buffer,
+ const u16 buffer_length,
+ const int timeout)
+{
+ int status = 0;
+ unsigned char *tb;
+ u16 off, len, bsize;
+
+ mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+ tb = buffer;
+ off = offset;
+ len = buffer_length;
+ while (len && !status) {
+ bsize = min_t(u16, CSR_CACHE_SIZE, len);
+ status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+ requesttype, off, tb,
+ bsize, timeout);
+
+ tb += bsize;
+ len -= bsize;
+ off += bsize;
+ }
+
+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
/*
* TX data handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794ad..ee3875f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
/*
* Cache size
*/
-#define CSR_CACHE_SIZE 8
-#define CSR_CACHE_SIZE_FIRMWARE 64
+#define CSR_CACHE_SIZE 64
/*
* USB request types.
@@ -172,6 +171,25 @@
const u16 buffer_length, const int timeout);
/**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+ const u8 request, const u8 requesttype,
+ const u16 offset, void *buffer,
+ const u16 buffer_length,
+ const int timeout);
+
+/**
* rt2x00usb_vendor_request_sw - Send single register command to device
* @rt2x00dev: Pointer to &struct rt2x00_dev
* @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92..fbe2a65 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1544,7 +1544,8 @@
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+ rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
rt2x00_desc_write(txd, 1, word);
@@ -2278,7 +2279,6 @@
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735..9761eaa 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@
unsigned int i;
int status;
u32 reg;
- const char *ptr = data;
- char *cache;
- int buflen;
/*
* Wait for stable hardware.
@@ -911,31 +908,12 @@
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
- * since we are going to write larger chunks of data
- * then normally used cache size.
*/
- cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
- if (!cache) {
- ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
- buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
- memcpy(cache, ptr, buflen);
-
- rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT,
- FIRMWARE_IMAGE_BASE + i, 0,
- cache, buflen,
- REGISTER_TIMEOUT32(buflen));
-
- ptr += buflen;
- }
-
- kfree(cache);
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ FIRMWARE_IMAGE_BASE,
+ data, len,
+ REGISTER_TIMEOUT32(len));
/*
* Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+ rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
+ u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@
skbdesc->desc = entry->skb->data;
/*
+ * Adjust the beacon databyte count. The current number is
+ * calculated before this function gets called, but falsely
+ * assumes that the descriptor was already present in the SKB.
+ */
+ rt2x00_desc_read(skbdesc->desc, 0, &word);
+ len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+ len += skbdesc->desc_len;
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+ rt2x00_desc_write(skbdesc->desc, 0, word);
+
+ /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1374,10 +1365,10 @@
* Write entire beacon with descriptor to register.
*/
beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
- rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
- USB_VENDOR_REQUEST_OUT, beacon_base, 0,
- entry->skb->data, entry->skb->len,
- REGISTER_TIMEOUT32(entry->skb->len));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, beacon_base,
+ entry->skb->data, entry->skb->len,
+ REGISTER_TIMEOUT32(entry->skb->len));
/*
* Clean up the beacon skb.
@@ -1871,7 +1862,6 @@
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 3afb49f..1b0d750 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@
struct rtl8187b_rx_hdr {
__le32 flags;
__le64 mac_time;
- u8 noise;
- u8 signal;
+ u8 sq;
+ u8 rssi;
u8 agc;
- u8 reserved;
- __le32 unused;
+ u8 flags2;
+ __le16 snr_long2end;
+ s8 pwdb_g12;
+ u8 fot;
} __attribute__((packed));
/* {rtl8187,rtl8187b}_tx_info is in skb */
@@ -100,6 +102,7 @@
struct usb_device *udev;
u32 rx_conf;
u16 txpwr_base;
+ u16 seqno;
u8 asic_rev;
u8 is_rtl8187b;
enum {
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d3067b1..177988e 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -169,6 +169,7 @@
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
unsigned int ep;
void *buf;
struct urb *urb;
@@ -234,6 +235,20 @@
ep = epmap[skb_get_queue_mapping(skb)];
}
+ /* FIXME: The sequence that follows is needed for this driver to
+ * work with mac80211 since "mac80211: fix TX sequence numbers".
+ * As with the temporary code in rt2x00, changes will be needed
+ * to get proper sequence numbers on beacons. In addition, this
+ * patch places the sequence number in the hardware state, which
+ * limits us to a single virtual state.
+ */
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ priv->seqno += 0x10;
+ ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+ }
+
info->driver_data[0] = dev;
info->driver_data[1] = urb;
@@ -257,6 +272,7 @@
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
u32 flags;
+ u32 quality;
spin_lock(&priv->rx_queue.lock);
if (skb->next)
@@ -280,44 +296,57 @@
flags = le32_to_cpu(hdr->flags);
signal = hdr->signal & 0x7f;
rx_status.antenna = (hdr->signal >> 7) & 1;
- rx_status.signal = signal;
rx_status.noise = hdr->noise;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
- priv->signal = signal;
priv->quality = signal;
+ rx_status.qual = priv->quality;
priv->noise = hdr->noise;
+ rate = (flags >> 20) & 0xF;
+ if (rate > 3) { /* OFDM rate */
+ if (signal > 90)
+ signal = 90;
+ else if (signal < 25)
+ signal = 25;
+ signal = 90 - signal;
+ } else { /* CCK rate */
+ if (signal > 95)
+ signal = 95;
+ else if (signal < 30)
+ signal = 30;
+ signal = 95 - signal;
+ }
+ rx_status.signal = signal;
+ priv->signal = signal;
} else {
struct rtl8187b_rx_hdr *hdr =
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+ /* The Realtek datasheet for the RTL8187B shows that the RX
+ * header contains the following quantities: signal quality,
+ * RSSI, AGC, the received power in dB, and the measured SNR.
+ * In testing, none of these quantities show qualitative
+ * agreement with AP signal strength, except for the AGC,
+ * which is inversely proportional to the strength of the
+ * signal. In the following, the quality and signal strength
+ * are derived from the AGC. The arbitrary scaling constants
+ * are chosen to make the results close to the values obtained
+ * for a BCM4312 using b43 as the driver. The noise is ignored
+ * for now.
+ */
flags = le32_to_cpu(hdr->flags);
- signal = hdr->agc >> 1;
- rx_status.antenna = (hdr->signal >> 7) & 1;
- rx_status.signal = 64 - min(hdr->noise, (u8)64);
- rx_status.noise = hdr->noise;
+ quality = 170 - hdr->agc;
+ if (quality > 100)
+ quality = 100;
+ signal = 14 - hdr->agc / 2;
+ rx_status.qual = quality;
+ priv->quality = quality;
+ rx_status.signal = signal;
+ priv->signal = signal;
+ rx_status.antenna = (hdr->rssi >> 7) & 1;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
- priv->signal = hdr->signal;
- priv->quality = hdr->agc >> 1;
- priv->noise = hdr->noise;
+ rate = (flags >> 20) & 0xF;
}
skb_trim(skb, flags & 0x0FFF);
- rate = (flags >> 20) & 0xF;
- if (rate > 3) { /* OFDM rate */
- if (signal > 90)
- signal = 90;
- else if (signal < 25)
- signal = 25;
- signal = 90 - signal;
- } else { /* CCK rate */
- if (signal > 95)
- signal = 95;
- else if (signal < 30)
- signal = 30;
- signal = 95 - signal;
- }
-
- rx_status.qual = priv->quality;
- rx_status.signal = signal;
rx_status.rate_idx = rate;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
@@ -1015,9 +1044,7 @@
priv->mode = IEEE80211_IF_TYPE_MNTR;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SIGNAL_UNSPEC;
- dev->max_signal = 65;
+ IEEE80211_HW_RX_INCLUDES_FCS;
eeprom.data = dev;
eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1132,10 +1159,16 @@
(*channel++).hw_value = txpwr >> 8;
}
- if (priv->is_rtl8187b)
+ if (priv->is_rtl8187b) {
printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
"is EXPERIMENTAL, and could damage your\n"
" hardware, use at your own risk\n");
+ dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+ } else {
+ dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->max_signal = 65;
+ }
+
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
" info!\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fcc532b..4d7b98b 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -935,7 +935,6 @@
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_SIGNAL_DB;
hw->max_signal = 100;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d38..9ce5585 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@
help
Say Y to enable support for the battery on the OLPC laptop.
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
config BATTERY_PALMTX
tristate "Palm T|X battery"
depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54..4706bf8 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e828..32570af 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
-#define EC_BAT_ACR 0x12
+#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */
#define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
#define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
#define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
@@ -84,6 +84,119 @@
.get_property = olpc_ac_get_prop,
};
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+ if (olpc_platform_info.ecver > 0x44) {
+ if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ec_byte & BAT_STAT_DISCHARGING)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* er,... */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ /* Older EC didn't report charge/discharge bits */
+ if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* Not _necessarily_ true but EC doesn't tell all yet */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte) {
+ case 0:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case BAT_ERR_OVERTEMP:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+
+ case BAT_ERR_OVERVOLTAGE:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case BAT_ERR_INFOFAIL:
+ case BAT_ERR_OUT_OF_CONTROL:
+ case BAT_ERR_ID_FAIL:
+ case BAT_ERR_ACR_FAIL:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+
+ default:
+ /* Eep. We don't know this failure code */
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte >> 4) {
+ case 1:
+ val->strval = "Gold Peak";
+ break;
+ case 2:
+ val->strval = "BYD";
+ break;
+ default:
+ val->strval = "Unknown";
+ break;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte & 0xf) {
+ case 1:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ break;
+ case 2:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+
/*********************************************************************
* Battery properties
*********************************************************************/
@@ -94,6 +207,7 @@
int ret = 0;
int16_t ec_word;
uint8_t ec_byte;
+ uint64_t ser_buf;
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
if (ret)
@@ -110,25 +224,10 @@
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
- if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (ec_byte & BAT_STAT_DISCHARGING)
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* er,... */
- val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
- } else {
- /* Older EC didn't report charge/discharge bits */
- if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* Not _necessarily_ true but EC doesn't tell all yet */
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- break;
- }
+ ret = olpc_bat_get_status(val, ec_byte);
+ if (ret)
+ return ret;
+ break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & BAT_STAT_PRESENT);
break;
@@ -137,72 +236,21 @@
if (ec_byte & BAT_STAT_DESTROY)
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else {
- ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ ret = olpc_bat_get_health(val);
if (ret)
return ret;
-
- switch (ec_byte) {
- case 0:
- val->intval = POWER_SUPPLY_HEALTH_GOOD;
- break;
-
- case BAT_ERR_OVERTEMP:
- val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
- break;
-
- case BAT_ERR_OVERVOLTAGE:
- val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- break;
-
- case BAT_ERR_INFOFAIL:
- case BAT_ERR_OUT_OF_CONTROL:
- case BAT_ERR_ID_FAIL:
- case BAT_ERR_ACR_FAIL:
- val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
- break;
-
- default:
- /* Eep. We don't know this failure code */
- return -EIO;
- }
}
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_mfr(val);
if (ret)
return ret;
-
- switch (ec_byte >> 4) {
- case 1:
- val->strval = "Gold Peak";
- break;
- case 2:
- val->strval = "BYD";
- break;
- default:
- val->strval = "Unknown";
- break;
- }
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_tech(val);
if (ret)
return ret;
-
- switch (ec_byte & 0xf) {
- case 1:
- val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
- break;
- case 2:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
- break;
- default:
- val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
- break;
- }
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@
ec_word = be16_to_cpu(ec_word);
val->intval = ec_word * 100 / 256;
break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ ec_word = be16_to_cpu(ec_word);
+ val->intval = ec_word * 6250 / 15;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+ if (ret)
+ return ret;
+
+ sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+ val->strval = bat_serial;
+ break;
default:
ret = -EINVAL;
break;
@@ -260,6 +324,50 @@
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START 0x20
+#define EEPROM_END 0x80
+#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+ uint8_t ec_byte;
+ int ret, end;
+
+ if (off >= EEPROM_SIZE)
+ return 0;
+ if (off + count > EEPROM_SIZE)
+ count = EEPROM_SIZE - off;
+
+ end = EEPROM_START + off + count;
+ for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+ &buf[ec_byte - EEPROM_START], 1);
+ if (ret) {
+ printk(KERN_ERR "olpc-battery: EC command "
+ "EC_BAT_EEPROM @ 0x%x failed -"
+ " %d!\n", ec_byte, ret);
+ return -EIO;
+ }
+ }
+
+ return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = 0,
+ .read = olpc_bat_eeprom_read,
};
/*********************************************************************
@@ -290,8 +398,14 @@
if (!olpc_platform_info.ecver)
return -ENXIO;
- if (olpc_platform_info.ecver < 0x43) {
- printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+ /*
+ * We've seen a number of EC protocol changes; this driver requires
+ * the latest EC protocol, supported by 0x44 and above.
+ */
+ if (olpc_platform_info.ecver < 0x44) {
+ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+ "battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
@@ -315,8 +429,14 @@
if (ret)
goto battery_failed;
+ ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+ if (ret)
+ goto eeprom_failed;
+
goto success;
+eeprom_failed:
+ power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
@@ -327,6 +447,7 @@
static void __exit olpc_bat_exit(void)
{
+ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da..fe2aeb1 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@
POWER_SUPPLY_ATTR(charge_empty),
POWER_SUPPLY_ATTR(charge_now),
POWER_SUPPLY_ATTR(charge_avg),
+ POWER_SUPPLY_ATTR(charge_counter),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 0000000..bf664fb
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+ int status;
+ struct power_supply psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct tosa_bat *bat);
+ int gpio_full;
+ int gpio_charge_off;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_bat);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_temp);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = tosa_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = tosa_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+ return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+ int old;
+ struct power_supply *psy = &bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = tosa_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+ tosa_bat_update(&tosa_bat_main);
+ tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ .use_for_apm = 1,
+ },
+
+ .gpio_full = TOSA_GPIO_BAT0_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT0_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "jacket-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .is_present = tosa_jacket_bat_is_present,
+ .gpio_full = TOSA_GPIO_BAT1_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT1_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_bu_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_bu_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .gpio_full = -1,
+ .gpio_charge_off = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+ .adc_bat = WM97XX_AUX_ID4,
+ .adc_bat_divider = 1266,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct {
+ int gpio;
+ char *name;
+ bool output;
+ int value;
+} gpios[] = {
+ { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 },
+ { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 },
+ { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 },
+ { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 },
+ { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 },
+ { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 },
+ { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 },
+ { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 },
+ { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 },
+ { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 },
+ { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 },
+ { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 },
+ { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_scheduled_work();
+ return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+ int ret;
+ int i;
+
+ if (!machine_is_tosa())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ ret = gpio_request(gpios[i].gpio, gpios[i].name);
+ if (ret) {
+ i--;
+ goto err_gpio;
+ }
+
+ if (gpios[i].output)
+ ret = gpio_direction_output(gpios[i].gpio,
+ gpios[i].value);
+ else
+ ret = gpio_direction_input(gpios[i].gpio);
+
+ if (ret)
+ goto err_gpio;
+ }
+
+ mutex_init(&tosa_bat_main.work_lock);
+ mutex_init(&tosa_bat_jacket.work_lock);
+
+ INIT_WORK(&bat_work, tosa_bat_work);
+
+ ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+ if (ret)
+ goto err_psy_reg_main;
+ ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+ if (ret)
+ goto err_psy_reg_jacket;
+ ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+ if (ret)
+ goto err_psy_reg_bu;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &tosa_bat_main);
+ if (ret)
+ goto err_req_main;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket full", &tosa_bat_jacket);
+ if (ret)
+ goto err_req_jacket;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket detect", &tosa_bat_jacket);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+ power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+ power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in tosa_bat_remove */
+ flush_scheduled_work();
+
+ i--;
+err_gpio:
+ for (; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+ int i;
+
+ free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+ power_supply_unregister(&tosa_bat_bu.psy);
+ power_supply_unregister(&tosa_bat_jacket.psy);
+ power_supply_unregister(&tosa_bat_main.psy);
+
+ /*
+ * now flush all pending work.
+ * we won't get any more schedules, since all
+ * sources (isr and external_power_changed)
+ * are unregistered now.
+ */
+ flush_scheduled_work();
+
+ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+ .driver.name = "wm97xx-battery",
+ .driver.owner = THIS_MODULE,
+ .probe = tosa_bat_probe,
+ .remove = __devexit_p(tosa_bat_remove),
+ .suspend = tosa_bat_suspend,
+ .resume = tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+ return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+ platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index d397fa5..7af60b9 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -20,7 +20,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
if (!rtc->ops)
err = -ENODEV;
@@ -46,7 +46,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
if (!rtc->ops)
err = -ENODEV;
@@ -66,7 +66,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
if (!rtc->ops)
err = -ENODEV;
@@ -106,7 +106,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
if (rtc->ops == NULL)
err = -ENODEV;
@@ -293,7 +293,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
if (!rtc->ops)
err = -ENODEV;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0a870b7..856cc1a 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -221,7 +221,7 @@
err = mutex_lock_interruptible(&rtc->ops_lock);
if (err)
- return -EBUSY;
+ return err;
/* check that the calling task has appropriate permissions
* for certain ioctls. doing this check here is useful
@@ -432,6 +432,8 @@
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
clear_uie(rtc);
#endif
+ rtc_irq_set_state(rtc, NULL, 0);
+
if (rtc->ops->release)
rtc->ops->release(rtc->dev.parent);
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 2d8df0b..20676cd 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -91,7 +91,8 @@
else
search_unit_addr = uid->base_unit_addr;
list_for_each_entry(pos, &lcu->grouplist, group) {
- if (pos->uid.base_unit_addr == search_unit_addr)
+ if (pos->uid.base_unit_addr == search_unit_addr &&
+ !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
return pos;
};
return NULL;
@@ -332,6 +333,7 @@
group->uid.base_unit_addr = uid->real_unit_addr;
else
group->uid.base_unit_addr = uid->base_unit_addr;
+ memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
INIT_LIST_HEAD(&group->group);
INIT_LIST_HEAD(&group->baselist);
INIT_LIST_HEAD(&group->aliaslist);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d774e79..cd3335c 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -913,7 +913,8 @@
static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\
- /* SSID */ 4 + 1 + /* unit addr */ 2 + 1)
+ /* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\
+ /* vduit */ 32 + 1)
static ssize_t
dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -945,8 +946,17 @@
sprintf(ua_string, "%02x", uid->real_unit_addr);
break;
}
- snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
- uid->vendor, uid->serial, uid->ssid, ua_string);
+ if (strlen(uid->vduit) > 0)
+ snprintf(uid_string, sizeof(uid_string),
+ "%s.%s.%04x.%s.%s",
+ uid->vendor, uid->serial,
+ uid->ssid, ua_string,
+ uid->vduit);
+ else
+ snprintf(uid_string, sizeof(uid_string),
+ "%s.%s.%04x.%s",
+ uid->vendor, uid->serial,
+ uid->ssid, ua_string);
spin_unlock(&dasd_devmap_lock);
return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
}
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 3590fdb..773b3fe 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -313,8 +313,8 @@
memset(pfxdata, 0, sizeof(*pfxdata));
/* prefix data */
pfxdata->format = 0;
- pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
- pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+ pfxdata->base_address = basepriv->ned->unit_addr;
+ pfxdata->base_lss = basepriv->ned->ID;
pfxdata->validity.define_extend = 1;
/* private uid is kept up to date, conf_data may be outdated */
@@ -536,36 +536,40 @@
/*
* Generate device unique id that specifies the physical device.
*/
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+ struct dasd_uid *uid)
{
struct dasd_eckd_private *private;
- struct dasd_eckd_confdata *confdata;
+ int count;
private = (struct dasd_eckd_private *) device->private;
if (!private)
return -ENODEV;
- confdata = &private->conf_data;
- if (!confdata)
+ if (!private->ned || !private->gneq)
return -ENODEV;
memset(uid, 0, sizeof(struct dasd_uid));
- memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+ memcpy(uid->vendor, private->ned->HDA_manufacturer,
sizeof(uid->vendor) - 1);
EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
- memcpy(uid->serial, confdata->ned1.HDA_location,
+ memcpy(uid->serial, private->ned->HDA_location,
sizeof(uid->serial) - 1);
EBCASC(uid->serial, sizeof(uid->serial) - 1);
- uid->ssid = confdata->neq.subsystemID;
- uid->real_unit_addr = confdata->ned1.unit_addr;
- if (confdata->ned2.sneq.flags == 0x40 &&
- confdata->ned2.sneq.format == 0x0001) {
- uid->type = confdata->ned2.sneq.sua_flags;
+ uid->ssid = private->gneq->subsystemID;
+ uid->real_unit_addr = private->ned->unit_addr;;
+ if (private->sneq) {
+ uid->type = private->sneq->sua_flags;
if (uid->type == UA_BASE_PAV_ALIAS)
- uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+ uid->base_unit_addr = private->sneq->base_unit_addr;
} else {
uid->type = UA_BASE_DEVICE;
}
+ if (private->vdsneq) {
+ for (count = 0; count < 16; count++) {
+ sprintf(uid->vduit+2*count, "%02x",
+ private->vdsneq->uit[count]);
+ }
+ }
return 0;
}
@@ -623,6 +627,15 @@
ret = -ENOMEM;
goto out_error;
}
+
+ /*
+ * buffer has to start with EBCDIC "V1.0" to show
+ * support for virtual device SNEQ
+ */
+ rcd_buf[0] = 0xE5;
+ rcd_buf[1] = 0xF1;
+ rcd_buf[2] = 0x4B;
+ rcd_buf[3] = 0xF0;
cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
if (IS_ERR(cqr)) {
ret = PTR_ERR(cqr);
@@ -646,8 +659,62 @@
return ret;
}
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+ struct dasd_sneq *sneq;
+ int i, count;
+
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ count = private->conf_len / sizeof(struct dasd_sneq);
+ sneq = (struct dasd_sneq *)private->conf_data;
+ for (i = 0; i < count; ++i) {
+ if (sneq->flags.identifier == 1 && sneq->format == 1)
+ private->sneq = sneq;
+ else if (sneq->flags.identifier == 1 && sneq->format == 4)
+ private->vdsneq = (struct vd_sneq *)sneq;
+ else if (sneq->flags.identifier == 2)
+ private->gneq = (struct dasd_gneq *)sneq;
+ else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+ private->ned = (struct dasd_ned *)sneq;
+ sneq++;
+ }
+ if (!private->ned || !private->gneq) {
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ return -EINVAL;
+ }
+ return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+ struct dasd_gneq *gneq;
+ int i, count, found;
+
+ count = conf_len / sizeof(*gneq);
+ gneq = (struct dasd_gneq *)conf_data;
+ found = 0;
+ for (i = 0; i < count; ++i) {
+ if (gneq->flags.identifier == 2) {
+ found = 1;
+ break;
+ }
+ gneq++;
+ }
+ if (found)
+ return ((char *)gneq)[18] & 0x07;
+ else
+ return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
{
void *conf_data;
int conf_len, conf_data_saved;
@@ -661,7 +728,6 @@
path_data->opm = ccw_device_get_path_mask(device->cdev);
lpm = 0x80;
conf_data_saved = 0;
-
/* get configuration data per operational path */
for (lpm = 0x80; lpm; lpm>>= 1) {
if (lpm & path_data->opm){
@@ -678,22 +744,20 @@
"data retrieved");
continue; /* no error */
}
- if (conf_len != sizeof(struct dasd_eckd_confdata)) {
- MESSAGE(KERN_WARNING,
- "sizes of configuration data mismatch"
- "%d (read) vs %ld (expected)",
- conf_len,
- sizeof(struct dasd_eckd_confdata));
- kfree(conf_data);
- continue; /* no error */
- }
/* save first valid configuration data */
- if (!conf_data_saved){
- memcpy(&private->conf_data, conf_data,
- sizeof(struct dasd_eckd_confdata));
+ if (!conf_data_saved) {
+ kfree(private->conf_data);
+ private->conf_data = conf_data;
+ private->conf_len = conf_len;
+ if (dasd_eckd_identify_conf_parts(private)) {
+ private->conf_data = NULL;
+ private->conf_len = 0;
+ kfree(conf_data);
+ continue;
+ }
conf_data_saved++;
}
- switch (((char *)conf_data)[242] & 0x07){
+ switch (dasd_eckd_path_access(conf_data, conf_len)) {
case 0x02:
path_data->npm |= lpm;
break;
@@ -701,7 +765,8 @@
path_data->ppm |= lpm;
break;
}
- kfree(conf_data);
+ if (conf_data != private->conf_data)
+ kfree(conf_data);
}
}
return 0;
@@ -952,6 +1017,7 @@
dasd_free_block(device->block);
device->block = NULL;
out_err1:
+ kfree(private->conf_data);
kfree(device->private);
device->private = NULL;
return rc;
@@ -959,7 +1025,17 @@
static void dasd_eckd_uncheck_device(struct dasd_device *device)
{
+ struct dasd_eckd_private *private;
+
+ private = (struct dasd_eckd_private *) device->private;
dasd_alias_disconnect_device_from_lcu(device);
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ private->conf_len = 0;
+ kfree(private->conf_data);
+ private->conf_data = NULL;
}
static struct dasd_ccw_req *
@@ -1746,9 +1822,10 @@
info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
memcpy(info->characteristics, &private->rdc_data,
sizeof(struct dasd_eckd_characteristics));
- info->confdata_size = sizeof(struct dasd_eckd_confdata);
- memcpy(info->configuration_data, &private->conf_data,
- sizeof(struct dasd_eckd_confdata));
+ info->confdata_size = min((unsigned long)private->conf_len,
+ sizeof(info->configuration_data));
+ memcpy(info->configuration_data, private->conf_data,
+ info->confdata_size);
return 0;
}
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index fc2509c..4bf0aa5 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -231,133 +231,62 @@
__u8 reserved3[10];
} __attribute__ ((packed));
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 dev_class;
- __u8 reserved;
- unsigned char dev_type[6];
- unsigned char dev_model[3];
- unsigned char HDA_manufacturer[3];
- unsigned char HDA_location[2];
- unsigned char HDA_seqno[12];
- __u8 ID;
- __u8 unit_addr;
- } __attribute__ ((packed)) ned1;
- union {
- struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char dev_type[6];
- unsigned char dev_model[3];
- unsigned char DASD_manufacturer[3];
- unsigned char DASD_location[2];
- unsigned char DASD_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned;
- struct {
- unsigned char flags; /* byte 0 */
- unsigned char res1; /* byte 1 */
- __u16 format; /* byte 2-3 */
- unsigned char res2[4]; /* byte 4-7 */
- unsigned char sua_flags; /* byte 8 */
- __u8 base_unit_addr; /* byte 9 */
- unsigned char res3[22]; /* byte 10-31 */
- } __attribute__ ((packed)) sneq;
- } __attribute__ ((packed)) ned2;
+ __u8 identifier:2;
+ __u8 token_id:1;
+ __u8 sno_valid:1;
+ __u8 subst_sno:1;
+ __u8 recNED:1;
+ __u8 emuNED:1;
+ __u8 reserved:1;
+ } __attribute__ ((packed)) flags;
+ __u8 descriptor;
+ __u8 dev_class;
+ __u8 reserved;
+ __u8 dev_type[6];
+ __u8 dev_model[3];
+ __u8 HDA_manufacturer[3];
+ __u8 HDA_location[2];
+ __u8 HDA_seqno[12];
+ __u8 ID;
+ __u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char cont_type[6];
- unsigned char cont_model[3];
- unsigned char cont_manufacturer[3];
- unsigned char cont_location[2];
- unsigned char cont_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned3;
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 res1;
+ __u16 format;
+ __u8 res2[4]; /* byte 4- 7 */
+ __u8 sua_flags; /* byte 8 */
+ __u8 base_unit_addr; /* byte 9 */
+ __u8 res3[22]; /* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char cont_type[6];
- unsigned char empty[3];
- unsigned char cont_manufacturer[3];
- unsigned char cont_location[2];
- unsigned char cont_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned4;
- unsigned char ned5[32];
- unsigned char ned6[32];
- unsigned char ned7[32];
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 res1;
+ __u16 format;
+ __u8 res2[4]; /* byte 4- 7 */
+ __u8 uit[16]; /* byte 8-23 */
+ __u8 res3[8]; /* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char reserved:6;
- } __attribute__ ((packed)) flags;
- __u8 selector;
- __u16 interfaceID;
- __u32 reserved;
- __u16 subsystemID;
- struct {
- unsigned char sp0:1;
- unsigned char sp1:1;
- unsigned char reserved:5;
- unsigned char scluster:1;
- } __attribute__ ((packed)) spathID;
- __u8 unit_address;
- __u8 dev_ID;
- __u8 dev_address;
- __u8 adapterID;
- __u16 link_address;
- struct {
- unsigned char parallel:1;
- unsigned char escon:1;
- unsigned char reserved:1;
- unsigned char ficon:1;
- unsigned char reserved2:4;
- } __attribute__ ((packed)) protocol_type;
- struct {
- unsigned char PID_in_236:1;
- unsigned char reserved:7;
- } __attribute__ ((packed)) format_flags;
- __u8 log_dev_address;
- unsigned char reserved2[12];
- } __attribute__ ((packed)) neq;
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 reserved[7];
+ __u16 subsystemID;
+ __u8 reserved2[22];
} __attribute__ ((packed));
struct dasd_eckd_path {
@@ -463,7 +392,14 @@
struct dasd_eckd_private {
struct dasd_eckd_characteristics rdc_data;
- struct dasd_eckd_confdata conf_data;
+ u8 *conf_data;
+ int conf_len;
+ /* pointers to specific parts in the conf_data */
+ struct dasd_ned *ned;
+ struct dasd_sneq *sneq;
+ struct vd_sneq *vdsneq;
+ struct dasd_gneq *gneq;
+
struct dasd_eckd_path path_data;
struct eckd_count count_area[5];
int init_cqr_status;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fb2f931..31ecaa4 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -307,6 +307,7 @@
__u16 ssid;
__u8 real_unit_addr;
__u8 base_unit_addr;
+ char vduit[33];
};
/*
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 3c8b25e..1fd8f21 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -399,6 +399,7 @@
void
sclp_sync_wait(void)
{
+ unsigned long long old_tick;
unsigned long flags;
unsigned long cr0, cr0_sync;
u64 timeout;
@@ -419,11 +420,12 @@
if (!irq_context)
local_bh_disable();
/* Enable service-signal interruption, disable timer interrupts */
+ old_tick = local_tick_disable();
trace_hardirqs_on();
__ctl_store(cr0, 0, 0);
cr0_sync = cr0;
+ cr0_sync &= 0xffff00a0;
cr0_sync |= 0x00000200;
- cr0_sync &= 0xFFFFF3AC;
__ctl_load(cr0_sync, 0, 0);
__raw_local_irq_stosm(0x01);
/* Loop until driver state indicates finished request */
@@ -439,9 +441,9 @@
__ctl_load(cr0, 0, 0);
if (!irq_context)
_local_bh_enable();
+ local_tick_enable(old_tick);
local_irq_restore(flags);
}
-
EXPORT_SYMBOL(sclp_sync_wait);
/* Dispatch changes in send and receive mask to registered listeners. */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 0c2b774..eb5f1b8 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -427,6 +427,8 @@
sclp_attach_storage(id);
switch (action) {
case MEM_ONLINE:
+ case MEM_GOING_OFFLINE:
+ case MEM_CANCEL_OFFLINE:
break;
case MEM_GOING_ONLINE:
rc = sclp_mem_change_state(start, size, 1);
@@ -434,6 +436,9 @@
case MEM_CANCEL_ONLINE:
sclp_mem_change_state(start, size, 0);
break;
+ case MEM_OFFLINE:
+ sclp_mem_change_state(start, size, 0);
+ break;
default:
rc = -EINVAL;
break;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index fff4ff4..4cebd6e 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -8,7 +8,6 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/cpu.h>
-#include <linux/kthread.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
#include <asm/smp.h>
@@ -41,19 +40,9 @@
put_online_cpus();
}
-static int sclp_cpu_kthread(void *data)
-{
- smp_rescan_cpus();
- return 0;
-}
-
static void __ref sclp_cpu_change_notify(struct work_struct *work)
{
- /* Can't call smp_rescan_cpus() from workqueue context since it may
- * deadlock in case of cpu hotplug. So we have to create a kernel
- * thread in order to call it.
- */
- kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+ smp_rescan_cpus();
}
static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index ef7bc0a..cf8f24a 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -5,7 +5,7 @@
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/bitops.h>
#include "idset.h"
#include "css.h"
@@ -25,18 +25,18 @@
{
struct idset *set;
- set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
- GFP_KERNEL);
+ set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
if (set) {
set->num_ssid = num_ssid;
set->num_id = num_id;
+ memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
}
return set;
}
void idset_free(struct idset *set)
{
- kfree(set);
+ vfree(set);
}
void idset_clear(struct idset *set)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d10c73c..d156485 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1355,7 +1355,7 @@
goto out_rel;
/* qdr is used in ccw1.cda which is u32 */
- irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+ irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!irq_ptr->qdr)
goto out_rel;
WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index ea01b85..ec5c4a4 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -142,7 +142,7 @@
return 0;
}
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
{
#ifdef CONFIG_PROC_FS
remove_proc_entry("qdio_perf", NULL);
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index f0923a8..1bd2a20 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -325,7 +325,7 @@
kmem_cache_free(qdio_q_cache, q);
}
}
- kfree(irq_ptr->qdr);
+ free_page((unsigned long) irq_ptr->qdr);
free_page(irq_ptr->chsc_page);
free_page((unsigned long) irq_ptr);
}
@@ -515,7 +515,7 @@
return 0;
}
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
{
kmem_cache_destroy(qdio_q_cache);
}
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 79954bd..292b60d 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -352,7 +352,7 @@
return len;
}
-void s390_virtio_console_init(void)
+void __init s390_virtio_console_init(void)
{
virtio_cons_early_init(early_put_chars);
}
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1895dbb..80971c2 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -419,6 +419,7 @@
int next_element_to_fill;
struct sk_buff_head skb_list;
struct list_head ctx_list;
+ int is_header[16];
};
struct qeth_card;
@@ -785,7 +786,7 @@
/* exports for qeth discipline device drivers */
extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
@@ -843,7 +844,7 @@
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *, int,
- struct qeth_eddp_context *);
+ struct qeth_eddp_context *, int, int);
int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *,
int, struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index cebb25e..bd420d1 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -19,8 +19,8 @@
#include <linux/mii.h>
#include <linux/kthread.h>
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
#include <asm/s390_rdev.h>
#include "qeth_core.h"
@@ -48,6 +48,8 @@
struct qeth_card_list_struct qeth_core_card_list;
EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
static struct device *qeth_core_root_dev;
static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
@@ -933,6 +935,10 @@
}
qeth_eddp_buf_release_contexts(buf);
for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+ if (buf->buffer->element[i].addr && buf->is_header[i])
+ kmem_cache_free(qeth_core_header_cache,
+ buf->buffer->element[i].addr);
+ buf->is_header[i] = 0;
buf->buffer->element[i].length = 0;
buf->buffer->element[i].addr = NULL;
buf->buffer->element[i].flags = 0;
@@ -3002,8 +3008,8 @@
if (skb_shinfo(skb)->nr_frags > 0)
elements_needed = (skb_shinfo(skb)->nr_frags + 1);
if (elements_needed == 0)
- elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
- + skb->len) >> PAGE_SHIFT);
+ elements_needed = 1 + (((((unsigned long) skb->data) %
+ PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
@@ -3015,7 +3021,8 @@
EXPORT_SYMBOL_GPL(qeth_get_elements_no);
static inline void __qeth_fill_buffer(struct sk_buff *skb,
- struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+ struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+ int offset)
{
int length = skb->len;
int length_here;
@@ -3027,6 +3034,11 @@
data = skb->data;
first_lap = (is_tso == 0 ? 1 : 0);
+ if (offset >= 0) {
+ data = skb->data + offset;
+ first_lap = 0;
+ }
+
while (length > 0) {
/* length_here is the remaining amount of data in this page */
length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
@@ -3058,22 +3070,22 @@
}
static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+ struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+ struct qeth_hdr *hdr, int offset, int hd_len)
{
struct qdio_buffer *buffer;
- struct qeth_hdr_tso *hdr;
int flush_cnt = 0, hdr_len, large_send = 0;
buffer = buf->buffer;
atomic_inc(&skb->users);
skb_queue_tail(&buf->skb_list, skb);
- hdr = (struct qeth_hdr_tso *) skb->data;
/*check first on TSO ....*/
- if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+ if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
int element = buf->next_element_to_fill;
- hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+ hdr_len = sizeof(struct qeth_hdr_tso) +
+ ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
/*fill first buffer entry only with header information */
buffer->element[element].addr = skb->data;
buffer->element[element].length = hdr_len;
@@ -3083,9 +3095,20 @@
skb->len -= hdr_len;
large_send = 1;
}
+
+ if (offset >= 0) {
+ int element = buf->next_element_to_fill;
+ buffer->element[element].addr = hdr;
+ buffer->element[element].length = sizeof(struct qeth_hdr) +
+ hd_len;
+ buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buf->is_header[element] = 1;
+ buf->next_element_to_fill++;
+ }
+
if (skb_shinfo(skb)->nr_frags == 0)
__qeth_fill_buffer(skb, buffer, large_send,
- (int *)&buf->next_element_to_fill);
+ (int *)&buf->next_element_to_fill, offset);
else
__qeth_fill_buffer_frag(skb, buffer, large_send,
(int *)&buf->next_element_to_fill);
@@ -3115,7 +3138,7 @@
int qeth_do_send_packet_fast(struct qeth_card *card,
struct qeth_qdio_out_q *queue, struct sk_buff *skb,
struct qeth_hdr *hdr, int elements_needed,
- struct qeth_eddp_context *ctx)
+ struct qeth_eddp_context *ctx, int offset, int hd_len)
{
struct qeth_qdio_out_buffer *buffer;
int buffers_needed = 0;
@@ -3148,7 +3171,7 @@
}
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
if (ctx == NULL) {
- qeth_fill_buffer(queue, buffer, skb);
+ qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
qeth_flush_buffers(queue, index, 1);
} else {
flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
@@ -3224,7 +3247,7 @@
}
}
if (ctx == NULL)
- tmp = qeth_fill_buffer(queue, buffer, skb);
+ tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
else {
tmp = qeth_eddp_fill_buffer(queue, ctx,
queue->next_buf_to_fill);
@@ -4443,8 +4466,17 @@
rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
if (rc)
goto register_err;
- return 0;
+ qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+ sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+ if (!qeth_core_header_cache) {
+ rc = -ENOMEM;
+ goto slab_err;
+ }
+
+ return 0;
+slab_err:
+ s390_root_dev_unregister(qeth_core_root_dev);
register_err:
driver_remove_file(&qeth_core_ccwgroup_driver.driver,
&driver_attr_group);
@@ -4466,6 +4498,7 @@
&driver_attr_group);
ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
ccw_driver_unregister(&qeth_ccw_driver);
+ kmem_cache_destroy(qeth_core_header_cache);
qeth_unregister_dbf_views();
PRINT_INFO("core functions removed\n");
}
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index a8b069c..b3cee03 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -243,8 +243,7 @@
static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
struct sk_buff *skb, int ipv, int cast_type)
{
- struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
- QETH_HEADER_SIZE);
+ struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
memset(hdr, 0, sizeof(struct qeth_hdr));
hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
@@ -621,6 +620,9 @@
int tx_bytes = skb->len;
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
+ int data_offset = -1;
+ int elements_needed = 0;
+ int hd_len = 0;
if ((card->state != CARD_STATE_UP) || !card->lan_online) {
card->stats.tx_carrier_errors++;
@@ -643,13 +645,32 @@
if (card->info.type == QETH_CARD_TYPE_OSN)
hdr = (struct qeth_hdr *)skb->data;
else {
- /* create a clone with writeable headroom */
- new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
- if (!new_skb)
- goto tx_drop;
- hdr = (struct qeth_hdr *)skb_push(new_skb,
+ if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+ (skb_shinfo(skb)->nr_frags == 0)) {
+ new_skb = skb;
+ data_offset = ETH_HLEN;
+ hd_len = ETH_HLEN;
+ hdr = kmem_cache_alloc(qeth_core_header_cache,
+ GFP_ATOMIC);
+ if (!hdr)
+ goto tx_drop;
+ elements_needed++;
+ skb_reset_mac_header(new_skb);
+ qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ hdr->hdr.l2.pkt_length = new_skb->len;
+ memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+ skb_mac_header(new_skb), ETH_HLEN);
+ } else {
+ /* create a clone with writeable headroom */
+ new_skb = skb_realloc_headroom(skb,
sizeof(struct qeth_hdr));
- qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ if (!new_skb)
+ goto tx_drop;
+ hdr = (struct qeth_hdr *)skb_push(new_skb,
+ sizeof(struct qeth_hdr));
+ skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+ qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ }
}
if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -660,9 +681,13 @@
goto tx_drop;
}
} else {
- elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
- if (!elements)
+ elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+ elements_needed);
+ if (!elements) {
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
goto tx_drop;
+ }
}
if ((large_send == QETH_LARGE_SEND_NO) &&
@@ -674,7 +699,7 @@
elements, ctx);
else
rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
- elements, ctx);
+ elements, ctx, data_offset, hd_len);
if (!rc) {
card->stats.tx_packets++;
card->stats.tx_bytes += tx_bytes;
@@ -701,6 +726,9 @@
if (ctx != NULL)
qeth_eddp_put_context(ctx);
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
+
if (rc == -EBUSY) {
if (new_skb != skb)
dev_kfree_skb_any(new_skb);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 3e1d138..dd72c3c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2604,6 +2604,7 @@
int tx_bytes = skb->len;
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
+ int data_offset = -1;
if ((card->info.type == QETH_CARD_TYPE_IQD) &&
(skb->protocol != htons(ETH_P_IPV6)) &&
@@ -2624,14 +2625,28 @@
card->perf_stats.outbound_start_time = qeth_get_micros();
}
- /* create a clone with writeable headroom */
- new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
- VLAN_HLEN);
- if (!new_skb)
- goto tx_drop;
+ if (skb_is_gso(skb))
+ large_send = card->options.large_send;
+
+ if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+ (skb_shinfo(skb)->nr_frags == 0)) {
+ new_skb = skb;
+ data_offset = ETH_HLEN;
+ hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+ if (!hdr)
+ goto tx_drop;
+ elements_needed++;
+ } else {
+ /* create a clone with writeable headroom */
+ new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+ + VLAN_HLEN);
+ if (!new_skb)
+ goto tx_drop;
+ }
if (card->info.type == QETH_CARD_TYPE_IQD) {
- skb_pull(new_skb, ETH_HLEN);
+ if (data_offset < 0)
+ skb_pull(new_skb, ETH_HLEN);
} else {
if (new_skb->protocol == htons(ETH_P_IP)) {
if (card->dev->type == ARPHRD_IEEE802_TR)
@@ -2657,9 +2672,6 @@
netif_stop_queue(dev);
- if (skb_is_gso(new_skb))
- large_send = card->options.large_send;
-
/* fix hardware limitation: as long as we do not have sbal
* chaining we can not send long frag lists so we temporary
* switch to EDDP
@@ -2677,9 +2689,16 @@
qeth_tso_fill_header(card, hdr, new_skb);
elements_needed++;
} else {
- hdr = (struct qeth_hdr *)skb_push(new_skb,
+ if (data_offset < 0) {
+ hdr = (struct qeth_hdr *)skb_push(new_skb,
sizeof(struct qeth_hdr));
- qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+ qeth_l3_fill_header(card, hdr, new_skb, ipv,
+ cast_type);
+ } else {
+ qeth_l3_fill_header(card, hdr, new_skb, ipv,
+ cast_type);
+ hdr->hdr.l3.length = new_skb->len - data_offset;
+ }
}
if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -2695,8 +2714,11 @@
} else {
int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
elements_needed);
- if (!elems)
+ if (!elems) {
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
goto tx_drop;
+ }
elements_needed += elems;
}
@@ -2709,7 +2731,7 @@
elements_needed, ctx);
else
rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
- elements_needed, ctx);
+ elements_needed, ctx, data_offset, 0);
if (!rc) {
card->stats.tx_packets++;
@@ -2737,6 +2759,9 @@
if (ctx != NULL)
qeth_eddp_put_context(ctx);
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
+
if (rc == -EBUSY) {
if (new_skb != skb)
dev_kfree_skb_any(new_skb);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a97f1ae..342e12f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1885,7 +1885,7 @@
* the interrupt is enabled. Delays are necessary to
* allow register changes to become visible.
*/
- spin_lock(&up->port.lock);
+ spin_lock_irqsave(&up->port.lock, flags);
if (up->port.flags & UPF_SHARE_IRQ)
disable_irq_nosync(up->port.irq);
@@ -1901,7 +1901,7 @@
if (up->port.flags & UPF_SHARE_IRQ)
enable_irq(up->port.irq);
- spin_unlock(&up->port.lock);
+ spin_unlock_irqrestore(&up->port.lock, flags);
/*
* If the interrupt is not reasserted, setup a timer to
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3a0bbbe..7e7383e 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0a..7274b52 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
#define SCC_WAIT_CLOSING 100
+#define GPIO_CTS 0
+#define GPIO_RTS 1
+#define GPIO_DCD 2
+#define GPIO_DSR 3
+#define GPIO_DTR 4
+#define GPIO_RI 5
+
+#define NUM_GPIOS (GPIO_RI+1)
+
struct uart_cpm_port {
struct uart_port port;
u16 rx_nrfifos;
@@ -68,6 +77,7 @@
unsigned char *rx_buf;
u32 flags;
void (*set_lineif)(struct uart_cpm_port *);
+ struct clk *clk;
u8 brg;
uint dp_addr;
void *mem_addr;
@@ -82,6 +92,7 @@
int wait_closing;
/* value to combine with opcode to form cpm command */
u32 command;
+ int gpios[NUM_GPIOS];
};
extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f8692..25efca5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
#include <linux/dma-mapping.h>
#include <linux/fs_uart_pd.h>
#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -96,13 +99,41 @@
static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* Whee. Do nothing. */
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (pinfo->gpios[GPIO_RTS] >= 0)
+ gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+ if (pinfo->gpios[GPIO_DTR] >= 0)
+ gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
}
static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
{
- /* Whee. Do nothing. */
- return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ if (pinfo->gpios[GPIO_CTS] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+ mctrl &= ~TIOCM_CTS;
+ }
+
+ if (pinfo->gpios[GPIO_DSR] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+ mctrl &= ~TIOCM_DSR;
+ }
+
+ if (pinfo->gpios[GPIO_DCD] >= 0) {
+ if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+ mctrl &= ~TIOCM_CAR;
+ }
+
+ if (pinfo->gpios[GPIO_RI] >= 0) {
+ if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+ mctrl |= TIOCM_RNG;
+ }
+
+ return mctrl;
}
/*
@@ -566,7 +597,10 @@
out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
- cpm_set_brg(pinfo->brg - 1, baud);
+ if (pinfo->clk)
+ clk_set_rate(pinfo->clk, baud);
+ else
+ cpm_set_brg(pinfo->brg - 1, baud);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -991,14 +1025,23 @@
void __iomem *mem, *pram;
int len;
int ret;
+ int i;
- data = of_get_property(np, "fsl,cpm-brg", &len);
- if (!data || len != 4) {
- printk(KERN_ERR "CPM UART %s has no/invalid "
- "fsl,cpm-brg property.\n", np->name);
- return -EINVAL;
+ data = of_get_property(np, "clock", NULL);
+ if (data) {
+ struct clk *clk = clk_get(NULL, (const char*)data);
+ if (!IS_ERR(clk))
+ pinfo->clk = clk;
}
- pinfo->brg = *data;
+ if (!pinfo->clk) {
+ data = of_get_property(np, "fsl,cpm-brg", &len);
+ if (!data || len != 4) {
+ printk(KERN_ERR "CPM UART %s has no/invalid "
+ "fsl,cpm-brg property.\n", np->name);
+ return -EINVAL;
+ }
+ pinfo->brg = *data;
+ }
data = of_get_property(np, "fsl,cpm-command", &len);
if (!data || len != 4) {
@@ -1050,6 +1093,9 @@
goto out_pram;
}
+ for (i = 0; i < NUM_GPIOS; i++)
+ pinfo->gpios[i] = of_get_gpio(np, i);
+
return cpm_uart_request_port(&pinfo->port);
out_pram:
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index cd728df..8a0749e 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -451,19 +451,21 @@
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
+SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-/* SH7763 SCIF2 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
SCIF_FNS(SCFDR, 0, 0, 0x1C, 16)
SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16)
-SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
+SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
+SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
deleted file mode 100644
index 5acf061..0000000
--- a/drivers/serial/v850e_uart.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This driver supports both the original V850E UART interface (called
- merely `UART' in the docs) and the newer `UARTB' interface, which is
- roughly a superset of the first one. The selection is made at
- configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
- presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
- can never have both.
-
- The UARTB interface also has a 16-entry FIFO mode, which is not
- yet supported by this driver. */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/v850e_uart.h>
-
-/* Initial UART state. This may be overridden by machine-dependent headers. */
-#ifndef V850E_UART_INIT_BAUD
-#define V850E_UART_INIT_BAUD 115200
-#endif
-#ifndef V850E_UART_INIT_CFLAGS
-#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD)
-#endif
-
-/* A string used for prefixing printed descriptions; since the same UART
- macro is actually used on other chips than the V850E. This must be a
- constant string. */
-#ifndef V850E_UART_CHIP_NAME
-#define V850E_UART_CHIP_NAME "V850E"
-#endif
-
-#define V850E_UART_MINOR_BASE 64 /* First tty minor number */
-
-
-/* Low-level UART functions. */
-
-/* Configure and turn on uart channel CHAN, using the termios `control
- modes' bits in CFLAGS, and a baud-rate of BAUD. */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
- int flags;
- v850e_uart_speed_t old_speed;
- v850e_uart_config_t old_config;
- v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
- v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
-
- /* Disable interrupts while we're twiddling the hardware. */
- local_irq_save (flags);
-
-#ifdef V850E_UART_PRE_CONFIGURE
- V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
-#endif
-
- old_config = V850E_UART_CONFIG (chan);
- old_speed = v850e_uart_speed (chan);
-
- if (! v850e_uart_speed_eq (old_speed, new_speed)) {
- /* The baud rate has changed. First, disable the UART. */
- V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
- old_config = 0; /* Force the uart to be re-initialized. */
-
- /* Reprogram the baud-rate generator. */
- v850e_uart_set_speed (chan, new_speed);
- }
-
- if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
- /* If we are using the uart for the first time, start by
- enabling it, which must be done before turning on any
- other bits. */
- V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
- /* See the initial state. */
- old_config = V850E_UART_CONFIG (chan);
- }
-
- if (new_config != old_config) {
- /* Which of the TXE/RXE bits we'll temporarily turn off
- before changing other control bits. */
- unsigned temp_disable = 0;
- /* Which of the TXE/RXE bits will be enabled. */
- unsigned enable = 0;
- unsigned changed_bits = new_config ^ old_config;
-
- /* Which of RX/TX will be enabled in the new configuration. */
- if (new_config & V850E_UART_CONFIG_RX_BITS)
- enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
- if (new_config & V850E_UART_CONFIG_TX_BITS)
- enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
-
- /* Figure out which of RX/TX needs to be disabled; note
- that this will only happen if they're not already
- disabled. */
- if (changed_bits & V850E_UART_CONFIG_RX_BITS)
- temp_disable
- |= (old_config & V850E_UART_CONFIG_RX_ENABLE);
- if (changed_bits & V850E_UART_CONFIG_TX_BITS)
- temp_disable
- |= (old_config & V850E_UART_CONFIG_TX_ENABLE);
-
- /* We have to turn off RX and/or TX mode before changing
- any associated control bits. */
- if (temp_disable)
- V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
-
- /* Write the new control bits, while RX/TX are disabled. */
- if (changed_bits & ~enable)
- V850E_UART_CONFIG (chan) = new_config & ~enable;
-
- v850e_uart_config_delay (new_config, new_speed);
-
- /* Write the final version, with enable bits turned on. */
- V850E_UART_CONFIG (chan) = new_config;
- }
-
- local_irq_restore (flags);
-}
-
-
-/* Low-level console. */
-
-#ifdef CONFIG_V850E_UART_CONSOLE
-
-static void v850e_uart_cons_write (struct console *co,
- const char *s, unsigned count)
-{
- if (count > 0) {
- unsigned chan = co->index;
- unsigned irq = V850E_UART_TX_IRQ (chan);
- int irq_was_enabled, irq_was_pending, flags;
-
- /* We don't want to get `transmission completed'
- interrupts, since we're busy-waiting, so we disable them
- while sending (we don't disable interrupts entirely
- because sending over a serial line is really slow). We
- save the status of the tx interrupt and restore it when
- we're done so that using printk doesn't interfere with
- normal serial transmission (other than interleaving the
- output, of course!). This should work correctly even if
- this function is interrupted and the interrupt printks
- something. */
-
- /* Disable interrupts while fiddling with tx interrupt. */
- local_irq_save (flags);
- /* Get current tx interrupt status. */
- irq_was_enabled = v850e_intc_irq_enabled (irq);
- irq_was_pending = v850e_intc_irq_pending (irq);
- /* Disable tx interrupt if necessary. */
- if (irq_was_enabled)
- v850e_intc_disable_irq (irq);
- /* Turn interrupts back on. */
- local_irq_restore (flags);
-
- /* Send characters. */
- while (count > 0) {
- int ch = *s++;
-
- if (ch == '\n') {
- /* We don't have the benefit of a tty
- driver, so translate NL into CR LF. */
- v850e_uart_wait_for_xmit_ok (chan);
- v850e_uart_putc (chan, '\r');
- }
-
- v850e_uart_wait_for_xmit_ok (chan);
- v850e_uart_putc (chan, ch);
-
- count--;
- }
-
- /* Restore saved tx interrupt status. */
- if (irq_was_enabled) {
- /* Wait for the last character we sent to be
- completely transmitted (as we'll get an
- interrupt interrupt at that point). */
- v850e_uart_wait_for_xmit_done (chan);
- /* Clear pending interrupts received due
- to our transmission, unless there was already
- one pending, in which case we want the
- handler to be called. */
- if (! irq_was_pending)
- v850e_intc_clear_pending_irq (irq);
- /* ... and then turn back on handling. */
- v850e_intc_enable_irq (irq);
- }
- }
-}
-
-extern struct uart_driver v850e_uart_driver;
-static struct console v850e_uart_cons =
-{
- .name = "ttyS",
- .write = v850e_uart_cons_write,
- .device = uart_console_device,
- .flags = CON_PRINTBUFFER,
- .cflag = V850E_UART_INIT_CFLAGS,
- .index = -1,
- .data = &v850e_uart_driver,
-};
-
-void v850e_uart_cons_init (unsigned chan)
-{
- v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
- V850E_UART_INIT_BAUD);
- v850e_uart_cons.index = chan;
- register_console (&v850e_uart_cons);
- printk ("Console: %s on-chip UART channel %d\n",
- V850E_UART_CHIP_NAME, chan);
-}
-
-/* This is what the init code actually calls. */
-static int v850e_uart_console_init (void)
-{
- v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
- return 0;
-}
-console_initcall(v850e_uart_console_init);
-
-#define V850E_UART_CONSOLE &v850e_uart_cons
-
-#else /* !CONFIG_V850E_UART_CONSOLE */
-#define V850E_UART_CONSOLE 0
-#endif /* CONFIG_V850E_UART_CONSOLE */
-
-/* TX/RX interrupt handlers. */
-
-static void v850e_uart_stop_tx (struct uart_port *port);
-
-void v850e_uart_tx (struct uart_port *port)
-{
- struct circ_buf *xmit = &port->info->xmit;
- int stopped = uart_tx_stopped (port);
-
- if (v850e_uart_xmit_ok (port->line)) {
- int tx_ch;
-
- if (port->x_char) {
- tx_ch = port->x_char;
- port->x_char = 0;
- } else if (!uart_circ_empty (xmit) && !stopped) {
- tx_ch = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- } else
- goto no_xmit;
-
- v850e_uart_putc (port->line, tx_ch);
- port->icount.tx++;
-
- if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
- uart_write_wakeup (port);
- }
-
- no_xmit:
- if (uart_circ_empty (xmit) || stopped)
- v850e_uart_stop_tx (port, stopped);
-}
-
-static irqreturn_t v850e_uart_tx_irq(int irq, void *data)
-{
- struct uart_port *port = data;
- v850e_uart_tx (port);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t v850e_uart_rx_irq(int irq, void *data)
-{
- struct uart_port *port = data;
- unsigned ch_stat = TTY_NORMAL;
- unsigned ch = v850e_uart_getc (port->line);
- unsigned err = v850e_uart_err (port->line);
-
- if (err) {
- if (err & V850E_UART_ERR_OVERRUN) {
- ch_stat = TTY_OVERRUN;
- port->icount.overrun++;
- } else if (err & V850E_UART_ERR_FRAME) {
- ch_stat = TTY_FRAME;
- port->icount.frame++;
- } else if (err & V850E_UART_ERR_PARITY) {
- ch_stat = TTY_PARITY;
- port->icount.parity++;
- }
- }
-
- port->icount.rx++;
-
- tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
- tty_schedule_flip (port->info->port.tty);
-
- return IRQ_HANDLED;
-}
-
-
-/* Control functions for the serial framework. */
-
-static void v850e_uart_nop (struct uart_port *port) { }
-static int v850e_uart_success (struct uart_port *port) { return 0; }
-
-static unsigned v850e_uart_tx_empty (struct uart_port *port)
-{
- return TIOCSER_TEMT; /* Can't detect. */
-}
-
-static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
-{
-#ifdef V850E_UART_SET_RTS
- V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
-#endif
-}
-
-static unsigned v850e_uart_get_mctrl (struct uart_port *port)
-{
- /* We don't support DCD or DSR, so consider them permanently active. */
- int mctrl = TIOCM_CAR | TIOCM_DSR;
-
- /* We may support CTS. */
-#ifdef V850E_UART_CTS
- mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
-#else
- mctrl |= TIOCM_CTS;
-#endif
-
- return mctrl;
-}
-
-static void v850e_uart_start_tx (struct uart_port *port)
-{
- v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
- v850e_uart_tx (port);
- v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_tx (struct uart_port *port)
-{
- v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_start_rx (struct uart_port *port)
-{
- v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_rx (struct uart_port *port)
-{
- v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
-{
- /* Umm, do this later. */
-}
-
-static int v850e_uart_startup (struct uart_port *port)
-{
- int err;
-
- /* Alloc RX irq. */
- err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
- IRQF_DISABLED, "v850e_uart", port);
- if (err)
- return err;
-
- /* Alloc TX irq. */
- err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
- IRQF_DISABLED, "v850e_uart", port);
- if (err) {
- free_irq (V850E_UART_RX_IRQ (port->line), port);
- return err;
- }
-
- v850e_uart_start_rx (port);
-
- return 0;
-}
-
-static void v850e_uart_shutdown (struct uart_port *port)
-{
- /* Disable port interrupts. */
- free_irq (V850E_UART_TX_IRQ (port->line), port);
- free_irq (V850E_UART_RX_IRQ (port->line), port);
-
- /* Turn off xmit/recv enable bits. */
- V850E_UART_CONFIG (port->line)
- &= ~(V850E_UART_CONFIG_TX_ENABLE
- | V850E_UART_CONFIG_RX_ENABLE);
- /* Then reset the channel. */
- V850E_UART_CONFIG (port->line) = 0;
-}
-
-static void
-v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- unsigned cflags = termios->c_cflag;
-
- /* Restrict flags to legal values. */
- if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
- /* The new value of CSIZE is invalid, use the old value. */
- cflags = (cflags & ~CSIZE)
- | (old ? (old->c_cflag & CSIZE) : CS8);
-
- termios->c_cflag = cflags;
-
- v850e_uart_configure (port->line, cflags,
- uart_get_baud_rate (port, termios, old,
- v850e_uart_min_baud(),
- v850e_uart_max_baud()));
-}
-
-static const char *v850e_uart_type (struct uart_port *port)
-{
- return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
-}
-
-static void v850e_uart_config_port (struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE)
- port->type = PORT_V850E_UART;
-}
-
-static int
-v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
- return -EINVAL;
- if (ser->irq != V850E_UART_TX_IRQ (port->line))
- return -EINVAL;
- return 0;
-}
-
-static struct uart_ops v850e_uart_ops = {
- .tx_empty = v850e_uart_tx_empty,
- .get_mctrl = v850e_uart_get_mctrl,
- .set_mctrl = v850e_uart_set_mctrl,
- .start_tx = v850e_uart_start_tx,
- .stop_tx = v850e_uart_stop_tx,
- .stop_rx = v850e_uart_stop_rx,
- .enable_ms = v850e_uart_nop,
- .break_ctl = v850e_uart_break_ctl,
- .startup = v850e_uart_startup,
- .shutdown = v850e_uart_shutdown,
- .set_termios = v850e_uart_set_termios,
- .type = v850e_uart_type,
- .release_port = v850e_uart_nop,
- .request_port = v850e_uart_success,
- .config_port = v850e_uart_config_port,
- .verify_port = v850e_uart_verify_port,
-};
-
-/* Initialization and cleanup. */
-
-static struct uart_driver v850e_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = "v850e_uart",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = V850E_UART_MINOR_BASE,
- .nr = V850E_UART_NUM_CHANNELS,
- .cons = V850E_UART_CONSOLE,
-};
-
-
-static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
-
-static int __init v850e_uart_init (void)
-{
- int rval;
-
- printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
-
- rval = uart_register_driver (&v850e_uart_driver);
- if (rval == 0) {
- unsigned chan;
-
- for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
- struct uart_port *port = &v850e_uart_ports[chan];
-
- memset (port, 0, sizeof *port);
-
- port->ops = &v850e_uart_ops;
- port->line = chan;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
-
- /* We actually use multiple IRQs, but the serial
- framework seems to mainly use this for
- informational purposes anyway. Here we use the TX
- irq. */
- port->irq = V850E_UART_TX_IRQ (chan);
-
- /* The serial framework doesn't really use these
- membase/mapbase fields for anything useful, but
- it requires that they be something non-zero to
- consider the port `valid', and also uses them
- for informational purposes. */
- port->membase = (void *)V850E_UART_BASE_ADDR (chan);
- port->mapbase = V850E_UART_BASE_ADDR (chan);
-
- /* The framework insists on knowing the uart's master
- clock freq, though it doesn't seem to do anything
- useful for us with it. We must make it at least
- higher than (the maximum baud rate * 16), otherwise
- the framework will puke during its internal
- calculations, and force the baud rate to be 9600.
- To be accurate though, just repeat the calculation
- we use when actually setting the speed. */
- port->uartclk = v850e_uart_max_clock() * 16;
-
- uart_add_one_port (&v850e_uart_driver, port);
- }
- }
-
- return rval;
-}
-
-static void __exit v850e_uart_exit (void)
-{
- unsigned chan;
-
- for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
- uart_remove_one_port (&v850e_uart_driver,
- &v850e_uart_ports[chan]);
-
- uart_unregister_driver (&v850e_uart_driver);
-}
-
-module_init (v850e_uart_init);
-module_exit (v850e_uart_exit);
-
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 617efb1..be97789 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -24,13 +24,12 @@
#include <linux/slab.h>
#include <linux/maple.h>
#include <linux/dma-mapping.h>
+#include <linux/delay.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
@@ -46,14 +45,15 @@
static LIST_HEAD(maple_waitq);
static LIST_HEAD(maple_sentq);
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
static struct maple_driver maple_dummy_driver;
static struct device maple_bus;
static int subdevice_map[MAPLE_PORTS];
static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
static struct kmem_cache *maple_queue_cache;
struct maple_device_specify {
@@ -129,35 +129,124 @@
kfree(mdev);
}
-/**
+/*
* maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
*/
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+ size_t length, void *data)
{
- mutex_lock(&maple_list_lock);
- list_add(&mq->list, &maple_waitq);
- mutex_unlock(&maple_list_lock);
+ int locking, ret = 0;
+ void *sendbuf = NULL;
+
+ mutex_lock(&maple_wlist_lock);
+ /* bounce if device already locked */
+ locking = mutex_is_locked(&mdev->mq->mutex);
+ if (locking) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ mutex_lock(&mdev->mq->mutex);
+
+ if (length) {
+ sendbuf = kmalloc(length * 4, GFP_KERNEL);
+ if (!sendbuf) {
+ mutex_unlock(&mdev->mq->mutex);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+ }
+
+ mdev->mq->command = command;
+ mdev->mq->length = length;
+ if (length > 1)
+ memcpy(sendbuf + 4, data, (length - 1) * 4);
+ mdev->mq->sendbuf = sendbuf;
+
+ list_add(&mdev->mq->list, &maple_waitq);
+out:
+ mutex_unlock(&maple_wlist_lock);
+ return ret;
}
EXPORT_SYMBOL_GPL(maple_add_packet);
+/*
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ * - waits for lock to be free
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+ u32 command, size_t length, void *data)
+{
+ int locking, ret = 0;
+ void *sendbuf = NULL;
+
+ locking = mutex_lock_interruptible(&mdev->mq->mutex);
+ if (locking) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (length) {
+ sendbuf = kmalloc(length * 4, GFP_KERNEL);
+ if (!sendbuf) {
+ mutex_unlock(&mdev->mq->mutex);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+ }
+
+ mdev->mq->command = command;
+ mdev->mq->length = length;
+ if (length > 1)
+ memcpy(sendbuf + 4, data, (length - 1) * 4);
+ mdev->mq->sendbuf = sendbuf;
+
+ mutex_lock(&maple_wlist_lock);
+ list_add(&mdev->mq->list, &maple_waitq);
+ mutex_unlock(&maple_wlist_lock);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
static struct mapleq *maple_allocq(struct maple_device *mdev)
{
struct mapleq *mq;
mq = kmalloc(sizeof(*mq), GFP_KERNEL);
if (!mq)
- return NULL;
+ goto failed_nomem;
mq->dev = mdev;
mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
- if (!mq->recvbuf) {
- kfree(mq);
- return NULL;
- }
+ if (!mq->recvbuf)
+ goto failed_p2;
+ /*
+ * most devices do not need the mutex - but
+ * anything that injects block reads or writes
+ * will rely on it
+ */
+ mutex_init(&mq->mutex);
return mq;
+
+failed_p2:
+ kfree(mq);
+failed_nomem:
+ return NULL;
}
static struct maple_device *maple_alloc_dev(int port, int unit)
@@ -178,7 +267,6 @@
}
mdev->dev.bus = &maple_bus_type;
mdev->dev.parent = &maple_bus;
- mdev->function = 0;
return mdev;
}
@@ -216,7 +304,6 @@
*maple_sendptr++ = PHYSADDR(mq->recvbuf);
*maple_sendptr++ =
mq->command | (to << 8) | (from << 16) | (len << 24);
-
while (len-- > 0)
*maple_sendptr++ = *lsendbuf++;
}
@@ -224,22 +311,27 @@
/* build up command queue */
static void maple_send(void)
{
- int i;
- int maple_packets;
+ int i, maple_packets = 0;
struct mapleq *mq, *nmq;
if (!list_empty(&maple_sentq))
return;
- if (list_empty(&maple_waitq) || !maple_dma_done())
+ mutex_lock(&maple_wlist_lock);
+ if (list_empty(&maple_waitq) || !maple_dma_done()) {
+ mutex_unlock(&maple_wlist_lock);
return;
- maple_packets = 0;
- maple_sendptr = maple_lastptr = maple_sendbuf;
+ }
+ mutex_unlock(&maple_wlist_lock);
+ maple_lastptr = maple_sendbuf;
+ maple_sendptr = maple_sendbuf;
+ mutex_lock(&maple_wlist_lock);
list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
maple_build_block(mq);
list_move(&mq->list, &maple_sentq);
if (maple_packets++ > MAPLE_MAXPACKETS)
break;
}
+ mutex_unlock(&maple_wlist_lock);
if (maple_packets > 0) {
for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
@@ -247,7 +339,8 @@
}
}
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
void *devptr)
{
struct maple_driver *maple_drv;
@@ -255,12 +348,8 @@
mdev = devptr;
maple_drv = to_maple_driver(driver);
- if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
- if (maple_drv->connect(mdev) == 0) {
- mdev->driver = maple_drv;
- return 1;
- }
- }
+ if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+ return 1;
return 0;
}
@@ -268,11 +357,6 @@
{
if (!mdev)
return;
- if (mdev->driver) {
- if (mdev->driver->disconnect)
- mdev->driver->disconnect(mdev);
- }
- mdev->driver = NULL;
device_unregister(&mdev->dev);
mdev = NULL;
}
@@ -328,8 +412,8 @@
mdev->port, mdev->unit, function);
matched =
- bus_for_each_drv(&maple_bus_type, NULL, mdev,
- attach_matching_maple_driver);
+ bus_for_each_drv(&maple_bus_type, NULL, mdev,
+ check_matching_maple_driver);
if (matched == 0) {
/* Driver does not exist yet */
@@ -373,45 +457,48 @@
static int setup_maple_commands(struct device *device, void *ignored)
{
+ int add;
struct maple_device *maple_dev = to_maple_dev(device);
if ((maple_dev->interval > 0)
&& time_after(jiffies, maple_dev->when)) {
- maple_dev->when = jiffies + maple_dev->interval;
- maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
- maple_dev->mq->sendbuf = &maple_dev->function;
- maple_dev->mq->length = 1;
- maple_add_packet(maple_dev->mq);
- liststatus++;
+ /* bounce if we cannot lock */
+ add = maple_add_packet(maple_dev,
+ be32_to_cpu(maple_dev->devinfo.function),
+ MAPLE_COMMAND_GETCOND, 1, NULL);
+ if (!add)
+ maple_dev->when = jiffies + maple_dev->interval;
} else {
- if (time_after(jiffies, maple_pnp_time)) {
- maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
- maple_dev->mq->length = 0;
- maple_add_packet(maple_dev->mq);
- liststatus++;
- }
+ if (time_after(jiffies, maple_pnp_time))
+ /* This will also bounce */
+ maple_add_packet(maple_dev, 0,
+ MAPLE_COMMAND_DEVINFO, 0, NULL);
}
-
return 0;
}
/* VBLANK bottom half - implemented via workqueue */
static void maple_vblank_handler(struct work_struct *work)
{
- if (!maple_dma_done())
+ if (!list_empty(&maple_sentq) || !maple_dma_done())
return;
- if (!list_empty(&maple_sentq))
- return;
+
ctrl_outl(0, MAPLE_ENABLE);
- liststatus = 0;
+
bus_for_each_dev(&maple_bus_type, NULL, NULL,
setup_maple_commands);
+
if (time_after(jiffies, maple_pnp_time))
maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
- if (liststatus && list_empty(&maple_sentq)) {
- INIT_LIST_HEAD(&maple_sentq);
+
+ mutex_lock(&maple_wlist_lock);
+ if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+ mutex_unlock(&maple_wlist_lock);
maple_send();
+ } else {
+ mutex_unlock(&maple_wlist_lock);
}
+
maplebus_dma_reset();
}
@@ -422,8 +509,8 @@
struct maple_device *mdev_add;
struct maple_device_specify ds;
+ ds.port = mdev->port;
for (k = 0; k < 5; k++) {
- ds.port = mdev->port;
ds.unit = k + 1;
retval =
bus_for_each_dev(&maple_bus_type, NULL, &ds,
@@ -437,9 +524,9 @@
mdev_add = maple_alloc_dev(mdev->port, k + 1);
if (!mdev_add)
return;
- mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
- mdev_add->mq->length = 0;
- maple_add_packet(mdev_add->mq);
+ maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+ 0, NULL);
+ /* mark that we are checking sub devices */
scanning = 1;
}
submask = submask >> 1;
@@ -505,6 +592,28 @@
}
}
+static void maple_port_rescan(void)
+{
+ int i;
+ struct maple_device *mdev;
+
+ fullscan = 1;
+ for (i = 0; i < MAPLE_PORTS; i++) {
+ if (checked[i] == false) {
+ fullscan = 0;
+ mdev = baseunits[i];
+ /*
+ * test lock in case scan has failed
+ * but device is still locked
+ */
+ if (mutex_is_locked(&mdev->mq->mutex))
+ mutex_unlock(&mdev->mq->mutex);
+ maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+ 0, NULL);
+ }
+ }
+}
+
/* maple dma end bottom half - implemented via workqueue */
static void maple_dma_handler(struct work_struct *work)
{
@@ -512,7 +621,6 @@
struct maple_device *dev;
char *recvbuf;
enum maple_code code;
- int i;
if (!maple_dma_done())
return;
@@ -522,6 +630,10 @@
recvbuf = mq->recvbuf;
code = recvbuf[0];
dev = mq->dev;
+ kfree(mq->sendbuf);
+ mutex_unlock(&mq->mutex);
+ list_del_init(&mq->list);
+
switch (code) {
case MAPLE_RESPONSE_NONE:
maple_response_none(dev, mq);
@@ -558,26 +670,16 @@
break;
}
}
- INIT_LIST_HEAD(&maple_sentq);
+ /* if scanning is 1 then we have subdevices to check */
if (scanning == 1) {
maple_send();
scanning = 2;
} else
scanning = 0;
-
- if (!fullscan) {
- fullscan = 1;
- for (i = 0; i < MAPLE_PORTS; i++) {
- if (checked[i] == false) {
- fullscan = 0;
- dev = baseunits[i];
- dev->mq->command =
- MAPLE_COMMAND_DEVINFO;
- dev->mq->length = 0;
- maple_add_packet(dev->mq);
- }
- }
- }
+ /*check if we have actually tested all ports yet */
+ if (!fullscan)
+ maple_port_rescan();
+ /* mark that we have been through the first scan */
if (started == 0)
started = 1;
}
@@ -631,7 +733,7 @@
if (maple_dev->devinfo.function == 0xFFFFFFFF)
return 0;
else if (maple_dev->devinfo.function &
- be32_to_cpu(maple_drv->function))
+ cpu_to_be32(maple_drv->function))
return 1;
return 0;
}
@@ -713,6 +815,9 @@
if (!maple_queue_cache)
goto cleanup_bothirqs;
+ INIT_LIST_HEAD(&maple_waitq);
+ INIT_LIST_HEAD(&maple_sentq);
+
/* setup maple ports */
for (i = 0; i < MAPLE_PORTS; i++) {
checked[i] = false;
@@ -723,9 +828,7 @@
maple_free_dev(mdev[i]);
goto cleanup_cache;
}
- mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
- mdev[i]->mq->length = 0;
- maple_add_packet(mdev[i]->mq);
+ maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
subdevice_map[i] = 0;
}
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 8da7535..77b44fb 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@
m66592->gadget.ops = &m66592_gadget_ops;
device_initialize(&m66592->gadget.dev);
- dev_set_name(&m66592->gadget, "gadget");
+ dev_set_name(&m66592->gadget.dev, "gadget");
m66592->gadget.is_dualspeed = 1;
m66592->gadget.dev.parent = &pdev->dev;
m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0ebc1bf..a6b5529 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,7 +118,6 @@
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU) += sh7343_voufb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 5001bd4..38a1e83 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1126,11 +1126,8 @@
acquire_console_sem();
mutex_lock(&(par->open_lock));
- if (par->ref_count == 0) {
- mutex_unlock(&(par->open_lock));
- release_console_sem();
- return 0;
- }
+ if (par->ref_count == 0)
+ goto fail;
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
@@ -1143,8 +1140,8 @@
arkfb_set_par(info);
fb_set_suspend(info, 0);
- mutex_unlock(&(par->open_lock));
fail:
+ mutex_unlock(&(par->open_lock));
release_console_sem();
return 0;
}
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index fbea2bd..6fa0b9d 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -18,7 +18,7 @@
#include <linux/fb.h>
#include <linux/backlight.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#include <asm/hp6xx.h>
#include <asm/hd64461.h>
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index 72d44db..738694d 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -92,7 +92,7 @@
plcd->us = dev;
plcd->pdata = pdata;
- plcd->lcd = lcd_device_register("platform-lcd", dev,
+ plcd->lcd = lcd_device_register(dev_name(dev), dev,
plcd, &platform_lcd_ops);
if (IS_ERR(plcd->lcd)) {
dev_err(dev, "cannot register lcd device\n");
@@ -101,6 +101,8 @@
}
platform_set_drvdata(pdev, plcd);
+ platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL);
+
return 0;
err_mem:
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d7822af..ef7870f 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -24,6 +24,7 @@
#include <asm/hardware.h>
#include <asm/parisc-device.h>
#include <asm/cacheflush.h>
+#include <asm/grfioctl.h>
#include "../sticore.h"
@@ -725,6 +726,7 @@
{
struct sti_cooked_rom *cooked;
struct sti_rom *raw = NULL;
+ unsigned long revno;
cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
if (!cooked)
@@ -767,9 +769,35 @@
sti->graphics_id[1] = raw->graphics_id[1];
sti_dump_rom(raw);
-
+
+ /* check if the ROM routines in this card are compatible */
+ if (wordmode || sti->graphics_id[1] != 0x09A02587)
+ goto ok;
+
+ revno = (raw->revno[0] << 8) | raw->revno[1];
+
+ switch (sti->graphics_id[0]) {
+ case S9000_ID_HCRX:
+ /* HyperA or HyperB ? */
+ if (revno == 0x8408 || revno == 0x840b)
+ goto msg_not_supported;
+ break;
+ case CRT_ID_THUNDER:
+ if (revno == 0x8509)
+ goto msg_not_supported;
+ break;
+ case CRT_ID_THUNDER2:
+ if (revno == 0x850c)
+ goto msg_not_supported;
+ }
+ok:
return 1;
+msg_not_supported:
+ printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
+ printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
+ "graphics-howto.html for more info.\n");
+ /* fall through */
out_err:
kfree(raw);
kfree(cooked);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 2e552d5..f89c3cc 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -87,6 +87,8 @@
static int ypan, ywrap;
static uint32_t pseudo_palette[16];
+static uint32_t gbe_cmap[256];
+static int gbe_turned_on; /* 0 turned off, 1 turned on */
static char *mode_option __initdata = NULL;
@@ -208,6 +210,8 @@
int i;
unsigned int val, x, y, vpixen_off;
+ gbe_turned_on = 0;
+
/* check if pixel counter is on */
val = gbe->vt_xy;
if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
@@ -371,6 +375,22 @@
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+
+ gbe_turned_on = 1;
+}
+
+static void gbe_loadcmap(void)
+{
+ int i, j;
+
+ for (i = 0; i < 256; i++) {
+ for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+ udelay(10);
+ if (j == 1000)
+ printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+ gbe->cmap[i] = gbe_cmap[i];
+ }
}
/*
@@ -382,6 +402,7 @@
switch (blank) {
case FB_BLANK_UNBLANK: /* unblank */
gbe_turn_on();
+ gbe_loadcmap();
break;
case FB_BLANK_NORMAL: /* blank */
@@ -796,16 +817,10 @@
gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
/* Initialize the color map */
- for (i = 0; i < 256; i++) {
- int j;
+ for (i = 0; i < 256; i++)
+ gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
- for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
- udelay(10);
- if (j == 1000)
- printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
-
- gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
- }
+ gbe_loadcmap();
return 0;
}
@@ -855,14 +870,17 @@
blue >>= 8;
if (info->var.bits_per_pixel <= 8) {
- /* wait for the color map FIFO to have a free entry */
- for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
- udelay(10);
- if (i == 1000) {
- printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
- return 1;
+ gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+ if (gbe_turned_on) {
+ /* wait for the color map FIFO to have a free entry */
+ for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+ udelay(10);
+ if (i == 1000) {
+ printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+ return 1;
+ }
+ gbe->cmap[regno] = gbe_cmap[regno];
}
- gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
} else if (regno < 16) {
switch (info->var.bits_per_pixel) {
case 15:
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 392a8be..e6467cf 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -27,7 +27,7 @@
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#define WIDTH 640
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 8c863a7..0a0fd48 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -58,18 +58,18 @@
#ifdef CONFIG_SH_DREAMCAST
#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
#endif
#ifdef CONFIG_SH_DMA
#include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
#include <asm/dma.h>
#endif
#ifdef CONFIG_SH_STORE_QUEUES
#include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
#endif
#ifndef PCI_DEVICE_ID_NEC_NEON250
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 536ab11..4a484ee 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -853,11 +853,8 @@
acquire_console_sem();
mutex_lock(&(par->open_lock));
- if (par->ref_count == 0) {
- mutex_unlock(&(par->open_lock));
- release_console_sem();
- return 0;
- }
+ if (par->ref_count == 0)
+ goto fail;
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
@@ -870,8 +867,8 @@
vt8623fb_set_par(info);
fb_set_suspend(info, 0);
- mutex_unlock(&(par->open_lock));
fail:
+ mutex_unlock(&(par->open_lock));
release_console_sem();
return 0;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index eaa3f2a..ccd6c53 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -420,7 +420,7 @@
static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
void *data)
{
- static unsigned long rom_pl;
+ unsigned long rom_pl;
static int die_nmi_called;
if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
diff --git a/fs/buffer.c b/fs/buffer.c
index ca12a6b..4dbe529 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -580,7 +580,7 @@
/*
* The buffer's backing address_space's private_lock must be held
*/
-static inline void __remove_assoc_queue(struct buffer_head *bh)
+static void __remove_assoc_queue(struct buffer_head *bh)
{
list_del_init(&bh->b_assoc_buffers);
WARN_ON(!bh->b_assoc_map);
diff --git a/fs/libfs.c b/fs/libfs.c
index baeb71e..1add676 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -216,8 +216,8 @@
s->s_flags = MS_NOUSER;
s->s_maxbytes = ~0ULL;
- s->s_blocksize = 1024;
- s->s_blocksize_bits = 10;
+ s->s_blocksize = PAGE_SIZE;
+ s->s_blocksize_bits = PAGE_SHIFT;
s->s_magic = magic;
s->s_op = ops ? ops : &simple_super_operations;
s->s_time_gran = 1;
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
index dc75f22..697663b 100644
--- a/fs/omfs/bitmap.c
+++ b/fs/omfs/bitmap.c
@@ -71,10 +71,10 @@
}
if (set) {
set_bit(bit, sbi->s_imap[map]);
- set_bit(bit, (long *) bh->b_data);
+ set_bit(bit, (unsigned long *)bh->b_data);
} else {
clear_bit(bit, sbi->s_imap[map]);
- clear_bit(bit, (long *) bh->b_data);
+ clear_bit(bit, (unsigned long *)bh->b_data);
}
}
mark_buffer_dirty(bh);
@@ -109,7 +109,7 @@
if (!bh)
goto out;
- set_bit(bit, (long *) bh->b_data);
+ set_bit(bit, (unsigned long *)bh->b_data);
mark_buffer_dirty(bh);
brelse(bh);
}
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 05a5bc3..c0757e9 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -104,7 +104,7 @@
oi = (struct omfs_inode *) bh->b_data;
oi->i_head.h_self = cpu_to_be64(inode->i_ino);
- oi->i_sibling = ~0ULL;
+ oi->i_sibling = ~cpu_to_be64(0ULL);
mark_buffer_dirty(bh);
brelse(bh);
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 66e01fa..7e24990 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -30,11 +30,11 @@
{
struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
- oe->e_next = ~0ULL;
+ oe->e_next = ~cpu_to_be64(0ULL);
oe->e_extent_count = cpu_to_be32(1),
oe->e_fill = cpu_to_be32(0x22),
- oe->e_entry.e_cluster = ~0ULL;
- oe->e_entry.e_blocks = ~0ULL;
+ oe->e_entry.e_cluster = ~cpu_to_be64(0ULL);
+ oe->e_entry.e_blocks = ~cpu_to_be64(0ULL);
}
int omfs_shrink_inode(struct inode *inode)
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 8e51a2a..60d2f82 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -418,7 +418,8 @@
romfs_readpage(struct file *file, struct page * page)
{
struct inode *inode = page->mapping->host;
- loff_t offset, avail, readlen;
+ loff_t offset, size;
+ unsigned long filled;
void *buf;
int result = -EIO;
@@ -430,21 +431,29 @@
/* 32 bit warning -- but not for us :) */
offset = page_offset(page);
- if (offset < i_size_read(inode)) {
- avail = inode->i_size-offset;
- readlen = min_t(unsigned long, avail, PAGE_SIZE);
- if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
- if (readlen < PAGE_SIZE) {
- memset(buf + readlen,0,PAGE_SIZE-readlen);
- }
- SetPageUptodate(page);
- result = 0;
+ size = i_size_read(inode);
+ filled = 0;
+ result = 0;
+ if (offset < size) {
+ unsigned long readlen;
+
+ size -= offset;
+ readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+ filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+ if (filled != readlen) {
+ SetPageError(page);
+ filled = 0;
+ result = -EIO;
}
}
- if (result) {
- memset(buf, 0, PAGE_SIZE);
- SetPageError(page);
- }
+
+ if (filled < PAGE_SIZE)
+ memset(buf + filled, 0, PAGE_SIZE-filled);
+
+ if (!result)
+ SetPageUptodate(page);
flush_dcache_page(page);
unlock_page(page);
diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h
index dbe13c6..c1d3c50 100644
--- a/include/asm-ia64/sn/mspec.h
+++ b/include/asm-ia64/sn/mspec.h
@@ -4,7 +4,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_MSPEC_H
@@ -32,26 +32,26 @@
#ifdef __KERNEL__
/*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
* variable is 64 bytes long. The first 8 bytes are used. The
* remaining 56 bytes are unaddressable due to the operation taking
* that portion of the address.
*
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line. The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries. This is because there are two
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line. The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries. This is because there are two
* addresses which reference the same physical cache line. One will
* be a cached entry with the memory type bits all set. This address
- * may be loaded into processor cache. The AMO_t will be referenced
+ * may be loaded into processor cache. The amo will be referenced
* uncached via the memory special memory type. If any portion of the
* cached cache-line is modified, when that line is flushed, it will
* overwrite the uncached value in physical memory and lead to
* inconsistency.
*/
-typedef struct {
+struct amo {
u64 variable;
u64 unused[7];
-} AMO_t;
+};
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4..0000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC 37
-#define REG_FP 72
-#define REG_SP 29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS 90
-
-#define GDB_FR_REG0 (PTRSIZE*6) /* 0 */
-#define GDB_FR_REG1 ((GDB_FR_REG0) + LONGSIZE) /* 1 */
-#define GDB_FR_REG2 ((GDB_FR_REG1) + LONGSIZE) /* 2 */
-#define GDB_FR_REG3 ((GDB_FR_REG2) + LONGSIZE) /* 3 */
-#define GDB_FR_REG4 ((GDB_FR_REG3) + LONGSIZE) /* 4 */
-#define GDB_FR_REG5 ((GDB_FR_REG4) + LONGSIZE) /* 5 */
-#define GDB_FR_REG6 ((GDB_FR_REG5) + LONGSIZE) /* 6 */
-#define GDB_FR_REG7 ((GDB_FR_REG6) + LONGSIZE) /* 7 */
-#define GDB_FR_REG8 ((GDB_FR_REG7) + LONGSIZE) /* 8 */
-#define GDB_FR_REG9 ((GDB_FR_REG8) + LONGSIZE) /* 9 */
-#define GDB_FR_REG10 ((GDB_FR_REG9) + LONGSIZE) /* 10 */
-#define GDB_FR_REG11 ((GDB_FR_REG10) + LONGSIZE) /* 11 */
-#define GDB_FR_REG12 ((GDB_FR_REG11) + LONGSIZE) /* 12 */
-#define GDB_FR_REG13 ((GDB_FR_REG12) + LONGSIZE) /* 13 */
-#define GDB_FR_REG14 ((GDB_FR_REG13) + LONGSIZE) /* 14 */
-#define GDB_FR_REG15 ((GDB_FR_REG14) + LONGSIZE) /* 15 */
-#define GDB_FR_REG16 ((GDB_FR_REG15) + LONGSIZE) /* 16 */
-#define GDB_FR_REG17 ((GDB_FR_REG16) + LONGSIZE) /* 17 */
-#define GDB_FR_REG18 ((GDB_FR_REG17) + LONGSIZE) /* 18 */
-#define GDB_FR_REG19 ((GDB_FR_REG18) + LONGSIZE) /* 19 */
-#define GDB_FR_REG20 ((GDB_FR_REG19) + LONGSIZE) /* 20 */
-#define GDB_FR_REG21 ((GDB_FR_REG20) + LONGSIZE) /* 21 */
-#define GDB_FR_REG22 ((GDB_FR_REG21) + LONGSIZE) /* 22 */
-#define GDB_FR_REG23 ((GDB_FR_REG22) + LONGSIZE) /* 23 */
-#define GDB_FR_REG24 ((GDB_FR_REG23) + LONGSIZE) /* 24 */
-#define GDB_FR_REG25 ((GDB_FR_REG24) + LONGSIZE) /* 25 */
-#define GDB_FR_REG26 ((GDB_FR_REG25) + LONGSIZE) /* 26 */
-#define GDB_FR_REG27 ((GDB_FR_REG26) + LONGSIZE) /* 27 */
-#define GDB_FR_REG28 ((GDB_FR_REG27) + LONGSIZE) /* 28 */
-#define GDB_FR_REG29 ((GDB_FR_REG28) + LONGSIZE) /* 29 */
-#define GDB_FR_REG30 ((GDB_FR_REG29) + LONGSIZE) /* 30 */
-#define GDB_FR_REG31 ((GDB_FR_REG30) + LONGSIZE) /* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS ((GDB_FR_REG31) + LONGSIZE) /* 32 */
-#define GDB_FR_LO ((GDB_FR_STATUS) + LONGSIZE) /* 33 */
-#define GDB_FR_HI ((GDB_FR_LO) + LONGSIZE) /* 34 */
-#define GDB_FR_BADVADDR ((GDB_FR_HI) + LONGSIZE) /* 35 */
-#define GDB_FR_CAUSE ((GDB_FR_BADVADDR) + LONGSIZE) /* 36 */
-#define GDB_FR_EPC ((GDB_FR_CAUSE) + LONGSIZE) /* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0 ((GDB_FR_EPC) + LONGSIZE) /* 38 */
-#define GDB_FR_FPR1 ((GDB_FR_FPR0) + LONGSIZE) /* 39 */
-#define GDB_FR_FPR2 ((GDB_FR_FPR1) + LONGSIZE) /* 40 */
-#define GDB_FR_FPR3 ((GDB_FR_FPR2) + LONGSIZE) /* 41 */
-#define GDB_FR_FPR4 ((GDB_FR_FPR3) + LONGSIZE) /* 42 */
-#define GDB_FR_FPR5 ((GDB_FR_FPR4) + LONGSIZE) /* 43 */
-#define GDB_FR_FPR6 ((GDB_FR_FPR5) + LONGSIZE) /* 44 */
-#define GDB_FR_FPR7 ((GDB_FR_FPR6) + LONGSIZE) /* 45 */
-#define GDB_FR_FPR8 ((GDB_FR_FPR7) + LONGSIZE) /* 46 */
-#define GDB_FR_FPR9 ((GDB_FR_FPR8) + LONGSIZE) /* 47 */
-#define GDB_FR_FPR10 ((GDB_FR_FPR9) + LONGSIZE) /* 48 */
-#define GDB_FR_FPR11 ((GDB_FR_FPR10) + LONGSIZE) /* 49 */
-#define GDB_FR_FPR12 ((GDB_FR_FPR11) + LONGSIZE) /* 50 */
-#define GDB_FR_FPR13 ((GDB_FR_FPR12) + LONGSIZE) /* 51 */
-#define GDB_FR_FPR14 ((GDB_FR_FPR13) + LONGSIZE) /* 52 */
-#define GDB_FR_FPR15 ((GDB_FR_FPR14) + LONGSIZE) /* 53 */
-#define GDB_FR_FPR16 ((GDB_FR_FPR15) + LONGSIZE) /* 54 */
-#define GDB_FR_FPR17 ((GDB_FR_FPR16) + LONGSIZE) /* 55 */
-#define GDB_FR_FPR18 ((GDB_FR_FPR17) + LONGSIZE) /* 56 */
-#define GDB_FR_FPR19 ((GDB_FR_FPR18) + LONGSIZE) /* 57 */
-#define GDB_FR_FPR20 ((GDB_FR_FPR19) + LONGSIZE) /* 58 */
-#define GDB_FR_FPR21 ((GDB_FR_FPR20) + LONGSIZE) /* 59 */
-#define GDB_FR_FPR22 ((GDB_FR_FPR21) + LONGSIZE) /* 60 */
-#define GDB_FR_FPR23 ((GDB_FR_FPR22) + LONGSIZE) /* 61 */
-#define GDB_FR_FPR24 ((GDB_FR_FPR23) + LONGSIZE) /* 62 */
-#define GDB_FR_FPR25 ((GDB_FR_FPR24) + LONGSIZE) /* 63 */
-#define GDB_FR_FPR26 ((GDB_FR_FPR25) + LONGSIZE) /* 64 */
-#define GDB_FR_FPR27 ((GDB_FR_FPR26) + LONGSIZE) /* 65 */
-#define GDB_FR_FPR28 ((GDB_FR_FPR27) + LONGSIZE) /* 66 */
-#define GDB_FR_FPR29 ((GDB_FR_FPR28) + LONGSIZE) /* 67 */
-#define GDB_FR_FPR30 ((GDB_FR_FPR29) + LONGSIZE) /* 68 */
-#define GDB_FR_FPR31 ((GDB_FR_FPR30) + LONGSIZE) /* 69 */
-
-#define GDB_FR_FSR ((GDB_FR_FPR31) + LONGSIZE) /* 70 */
-#define GDB_FR_FIR ((GDB_FR_FSR) + LONGSIZE) /* 71 */
-#define GDB_FR_FRP ((GDB_FR_FIR) + LONGSIZE) /* 72 */
-
-#define GDB_FR_DUMMY ((GDB_FR_FRP) + LONGSIZE) /* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX ((GDB_FR_DUMMY) + LONGSIZE) /* 74 */
-#define GDB_FR_CP0_RANDOM ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */
-#define GDB_FR_CP0_ENTRYLO0 ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1 ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7 ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */
-#define GDB_FR_CP0_REG8 ((GDB_FR_CP0_REG7) + LONGSIZE) /* 82 */
-#define GDB_FR_CP0_REG9 ((GDB_FR_CP0_REG8) + LONGSIZE) /* 83 */
-#define GDB_FR_CP0_ENTRYHI ((GDB_FR_CP0_REG9) + LONGSIZE) /* 84 */
-#define GDB_FR_CP0_REG11 ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12 ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */
-#define GDB_FR_CP0_REG13 ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */
-#define GDB_FR_CP0_REG14 ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */
-#define GDB_FR_CP0_PRID ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */
-
-#define GDB_FR_SIZE ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
- /*
- * Pad bytes for argument save space on the stack
- * 24/48 Bytes for 32/64 bit code
- */
- unsigned long pad0[6];
-
- /*
- * saved main processor registers
- */
- long reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7;
- long reg8, reg9, reg10, reg11, reg12, reg13, reg14, reg15;
- long reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
- long reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
- /*
- * Saved special registers
- */
- long cp0_status;
- long lo;
- long hi;
- long cp0_badvaddr;
- long cp0_cause;
- long cp0_epc;
-
- /*
- * Saved floating point registers
- */
- long fpr0, fpr1, fpr2, fpr3, fpr4, fpr5, fpr6, fpr7;
- long fpr8, fpr9, fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
- long fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
- long fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
- long cp1_fsr;
- long cp1_fir;
-
- /*
- * Frame pointer
- */
- long frame_ptr;
- long dummy; /* unused */
-
- /*
- * saved cp0 registers
- */
- long cp0_index;
- long cp0_random;
- long cp0_entrylo0;
- long cp0_entrylo1;
- long cp0_context;
- long cp0_pagemask;
- long cp0_wired;
- long cp0_reg7;
- long cp0_reg8;
- long cp0_reg9;
- long cp0_entryhi;
- long cp0_reg11;
- long cp0_reg12;
- long cp0_reg13;
- long cp0_reg14;
- long cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b0..5bf62aa 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_FP,
+ DIE_TRAP,
+ DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 0000000..48223b0
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX 2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES (90*sizeof(u32))
+#define NUMCRITREGBYTES (12*sizeof(u32))
+#else
+#define NUMREGBYTES (90*sizeof(u64))
+#define NUMCRITREGBYTES (12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE 4
+#define CACHE_FLUSH_IS_SAFE 0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c205875..5510c53 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -174,4 +174,6 @@
extern int pci_probe_only;
+extern char * (*pcibios_plat_setup)(char *str);
+
#endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index cbae37e..5b1ccf9 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -44,5 +44,19 @@
extern int (*txx9_irq_dispatch)(int pending);
void prom_init_cmdline(void);
char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+ unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
#endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6..a409c44 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
/* Clocks */
#define JMR3927_CORECLK 132710400 /* 132.7MHz */
-#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */
-#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */
/*
* TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a450..3d32529 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@
};
extern enum txx9_pci_err_action txx9_pci_err_action;
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
#endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4f..02e161d 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
void smsc_fdc37m81x_config_beg(void);
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ea79e1b..587deb9 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,9 +8,8 @@
#ifndef __ASM_TXX9_TX3927_H
#define __ASM_TXX9_TX3927_H
-#include <asm/txx9/txx927.h>
-
#define TX3927_REG_BASE 0xfffe0000UL
+#define TX3927_REG_SIZE 0x00010000
#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000)
#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000)
#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@
/* see PCI_STATUS_XXX in linux/pci.h */
#define PCI_STATUS_NEW_CAP 0x0010
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL 0x00001600
+
/* bits for TC */
#define TX3927_PCIC_TC_OF16E 0x00000020
#define TX3927_PCIC_TC_IF8E 0x00000010
#define TX3927_PCIC_TC_OF8E 0x00000008
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL 0x0003ffff
+
/* bits for IOBA/MBA */
/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
@@ -313,12 +318,22 @@
#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG)
#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
+#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch) \
+ (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
- unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+ unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
#endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index ceb4b79..195f651 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -243,12 +243,13 @@
}
unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
void tx4927_setup(void);
void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
int tx4927_report_pciclk(void);
int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
void tx4927_irq_init(void);
#endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d0..c470b8a 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
#define __ASM_TXX9_TX4927PCIC_H
#include <linux/pci.h>
+#include <linux/irqreturn.h>
struct tx4927_pcic_reg {
u32 pciid;
@@ -192,8 +193,11 @@
struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
- struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+ struct pci_controller *channel, int extarb);
void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
#endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 1ed969d..8175d4c 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -276,15 +276,18 @@
#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch)
#define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
void tx4938_setup(void);
void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
int tx4938_report_pciclk(void);
void tx4938_report_pci1clk(void);
int tx4938_pciclk66_setup(void);
struct pci_dev;
int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
void tx4938_irq_init(void);
#endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad..0000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
- volatile unsigned long lcr;
- volatile unsigned long dicr;
- volatile unsigned long disr;
- volatile unsigned long cisr;
- volatile unsigned long fcr;
- volatile unsigned long flcr;
- volatile unsigned long bgr;
- volatile unsigned long tfifo;
- volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK 0x00000060
-#define TXx927_SILCR_SCS_IMCLK 0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020
-#define TXx927_SILCR_SCS_SCLK 0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG 0x00000060
-#define TXx927_SILCR_UEPS 0x00000010
-#define TXx927_SILCR_UPEN 0x00000008
-#define TXx927_SILCR_USBL_MASK 0x00000004
-#define TXx927_SILCR_USBL_1BIT 0x00000004
-#define TXx927_SILCR_USBL_2BIT 0x00000000
-#define TXx927_SILCR_UMODE_MASK 0x00000003
-#define TXx927_SILCR_UMODE_8BIT 0x00000000
-#define TXx927_SILCR_UMODE_7BIT 0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE 0x00008000
-#define TXx927_SIDICR_RDE 0x00004000
-#define TXx927_SIDICR_TIE 0x00002000
-#define TXx927_SIDICR_RIE 0x00001000
-#define TXx927_SIDICR_SPIE 0x00000800
-#define TXx927_SIDICR_CTSAC 0x00000600
-#define TXx927_SIDICR_STIE_MASK 0x0000003f
-#define TXx927_SIDICR_STIE_OERS 0x00000020
-#define TXx927_SIDICR_STIE_CTSS 0x00000010
-#define TXx927_SIDICR_STIE_RBRKD 0x00000008
-#define TXx927_SIDICR_STIE_TRDY 0x00000004
-#define TXx927_SIDICR_STIE_TXALS 0x00000002
-#define TXx927_SIDICR_STIE_UBRKD 0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK 0x00008000
-#define TXx927_SIDISR_UVALID 0x00004000
-#define TXx927_SIDISR_UFER 0x00002000
-#define TXx927_SIDISR_UPER 0x00001000
-#define TXx927_SIDISR_UOER 0x00000800
-#define TXx927_SIDISR_ERI 0x00000400
-#define TXx927_SIDISR_TOUT 0x00000200
-#define TXx927_SIDISR_TDIS 0x00000100
-#define TXx927_SIDISR_RDIS 0x00000080
-#define TXx927_SIDISR_STIS 0x00000040
-#define TXx927_SIDISR_RFDN_MASK 0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS 0x00000020
-#define TXx927_SICISR_CTSS 0x00000010
-#define TXx927_SICISR_RBRKD 0x00000008
-#define TXx927_SICISR_TRDY 0x00000004
-#define TXx927_SICISR_TXALS 0x00000002
-#define TXx927_SICISR_UBRKD 0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST 0x00008000
-#define TXx927_SIFCR_RDIL_MASK 0x00000180
-#define TXx927_SIFCR_RDIL_1 0x00000000
-#define TXx927_SIFCR_RDIL_4 0x00000080
-#define TXx927_SIFCR_RDIL_8 0x00000100
-#define TXx927_SIFCR_RDIL_12 0x00000180
-#define TXx927_SIFCR_RDIL_MAX 0x00000180
-#define TXx927_SIFCR_TDIL_MASK 0x00000018
-#define TXx927_SIFCR_TDIL_MASK 0x00000018
-#define TXx927_SIFCR_TDIL_1 0x00000000
-#define TXx927_SIFCR_TDIL_4 0x00000001
-#define TXx927_SIFCR_TDIL_8 0x00000010
-#define TXx927_SIFCR_TDIL_MAX 0x00000010
-#define TXx927_SIFCR_TFRST 0x00000004
-#define TXx927_SIFCR_RFRST 0x00000002
-#define TXx927_SIFCR_FRSTE 0x00000001
-#define TXx927_SIO_TX_FIFO 8
-#define TXx927_SIO_RX_FIFO 16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS 0x00001000
-#define TXx927_SIFLCR_TES 0x00000800
-#define TXx927_SIFLCR_RTSSC 0x00000200
-#define TXx927_SIFLCR_RSDE 0x00000100
-#define TXx927_SIFLCR_TSDE 0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e
-#define TXx927_SIFLCR_TBRK 0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK 0x00000300
-#define TXx927_SIBGR_BCLK_T0 0x00000000
-#define TXx927_SIBGR_BCLK_T2 0x00000100
-#define TXx927_SIBGR_BCLK_T4 0x00000200
-#define TXx927_SIBGR_BCLK_T6 0x00000300
-#define TXx927_SIBGR_BRD_MASK 0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e5..5620879 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
#ifdef CONFIG_IRQ_CPU
#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
#else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16)
+#else
#define TXX9_IRQ_BASE 0
#endif
+#endif
#ifdef CONFIG_CPU_TX39XX
#define TXx9_MAX_IR 16
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 63a5533..24d79e3 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -3,6 +3,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/of.h>
/* Opcodes common to CPM1 and CPM2
*/
@@ -100,4 +101,6 @@
dma_addr_t cpm_muram_dma(void __iomem *addr);
int cpm_command(u32 command, u8 opcode);
+int cpm2_gpiochip_add32(struct device_node *np);
+
#endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9c..2a6fa01 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
#ifdef CONFIG_PPC_85xx
#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@
#define cpm_dpfree cpm_muram_free
#define cpm_dpram_addr cpm_muram_addr
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
extern void cpm2_reset(void);
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK (get_brgfreq())
+#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+ __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+ __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
/* Function code bits, usually generic to devices.
*/
#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
@@ -195,17 +226,6 @@
#define SMCM_TX ((unsigned char)0x02)
#define SMCM_RX ((unsigned char)0x01)
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
/* SCCs.
*/
#define SCC_GSMRH_IRP ((uint)0x00040000)
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index 5fc78c0..74c6f38 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -461,6 +461,8 @@
return pt;
}
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
index 4b7cb96..89ec705 100644
--- a/include/asm-s390/hardirq.h
+++ b/include/asm-s390/hardirq.h
@@ -34,4 +34,18 @@
void clock_comparator_work(void);
+static inline unsigned long long local_tick_disable(void)
+{
+ unsigned long long old;
+
+ old = S390_lowcore.clock_comparator;
+ S390_lowcore.clock_comparator = -1ULL;
+ return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+ S390_lowcore.clock_comparator = comp;
+}
+
#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
index eaca6df..1171e6d 100644
--- a/include/asm-s390/ipl.h
+++ b/include/asm-s390/ipl.h
@@ -159,7 +159,8 @@
};
enum diag308_rc {
- DIAG308_RC_OK = 1,
+ DIAG308_RC_OK = 0x0001,
+ DIAG308_RC_NOCONFIG = 0x0102,
};
extern int diag308(unsigned long subcode, void *addr);
diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h
index 7bdc0fe..825503c 100644
--- a/include/asm-s390/schid.h
+++ b/include/asm-s390/schid.h
@@ -11,6 +11,7 @@
} __attribute__ ((packed, aligned(4)));
#ifdef __KERNEL__
+#include <linux/string.h>
/* Helper function for sane state of pre-allocated subchannel_id. */
static inline void
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 4ba14e4..2bd9fae 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -65,7 +65,6 @@
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
-#define MACHINE_FLAG_P390 (1UL << 2)
#define MACHINE_FLAG_CSP (1UL << 3)
#define MACHINE_FLAG_MVPG (1UL << 4)
#define MACHINE_FLAG_DIAG44 (1UL << 5)
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 583da80..c8ad350 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -259,7 +259,13 @@
#define __NR_timerfd_create 319
#define __NR_timerfd_settime 320
#define __NR_timerfd_gettime 321
-#define NR_syscalls 322
+#define __NR_signalfd4 322
+#define __NR_eventfd2 323
+#define __NR_inotify_init1 324
+#define __NR_pipe2 325
+#define __NR_dup3 326
+#define __NR_epoll_create1 327
+#define NR_syscalls 328
/*
* There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore
deleted file mode 100644
index 9218ef8..0000000
--- a/include/asm-sh/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-cpu
-mach
-machtypes.h
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
deleted file mode 100644
index 795ddd6..0000000
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x00000000
-#define P2SEG 0x20000000
-#define P3SEG 0x00000000
-#define P4SEG 0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c..0000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85..0000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f..0000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504a..0000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062..0000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e24..0000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726..0000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
deleted file mode 100644
index f70d8ef7..0000000
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- * - flush_cache_all() flushes entire cache
- * - flush_cache_mm(mm) flushes the specified mm context's cache lines
- * - flush_cache_dup mm(mm) handles cache flushing when forking
- * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- * - flush_cache_range(vma, start, end) flushes a range of pages
- *
- * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_range(start, end) flushes(invalidates) a range for icache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- * Caches are indexed (effectively) by physical address on SH-3, so
- * we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-
-#define p3_cache_init() do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404a..0000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES 0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc..0000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b3..0000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index ecc8061..5f888cc 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -7,6 +7,8 @@
extern int force_iommu, no_iommu;
extern int iommu_detected;
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
#ifdef CONFIG_GART_IOMMU
extern int gart_iommu_aperture;
extern int gart_iommu_aperture_allowed;
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3..5c7f946 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
#define CN_W1_VAL 0x1
#define CN_IDX_V86D 0x4
#define CN_VAL_V86D_UVESAFB 0x1
+#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */
-#define CN_NETLINK_USERS 5
+#define CN_NETLINK_USERS 6
/*
* Maximum connector's message size.
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 2270ca5..6fd5668 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -106,6 +106,7 @@
#define CPUFREQ_ADJUST (0)
#define CPUFREQ_INCOMPATIBLE (1)
#define CPUFREQ_NOTIFY (2)
+#define CPUFREQ_START (3)
#define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
#define CPUFREQ_SHARED_TYPE_HW (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 96d0509..d3219d7 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -287,7 +287,7 @@
* gcc optimizes it out (it's a constant) and there's no huge stack
* variable created:
*/
-#define cpumask_of_cpu(cpu) ({ *get_cpu_mask(cpu); })
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index f8598f5..c975caf 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -8,4 +8,3 @@
unsigned long align_mask);
extern void iommu_area_free(unsigned long *map, unsigned long start,
unsigned int nr);
-extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc..22d2115 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -118,6 +118,10 @@
int adjust_resource(struct resource *res, resource_size_t start,
resource_size_t size);
resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+ return res->end - res->start + 1;
+}
/* Convenience shorthand with allocation */
#define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name))
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 57aefa1..b961448 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -108,8 +108,7 @@
static inline void print_ip_sym(unsigned long ip)
{
- printk("[<%p>]", (void *) ip);
- print_symbol(" %s\n", ip);
+ printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
}
#endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fdbbf72..aaa998f 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -75,6 +75,12 @@
*/
#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
#define KERN_EMERG "<0>" /* system is unusable */
#define KERN_ALERT "<1>" /* action must be taken immediately */
#define KERN_CRIT "<2>" /* critical conditions */
diff --git a/include/linux/maple.h b/include/linux/maple.h
index 523a286..c853b10 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
#define __LINUX_MAPLE_H
#include <linux/device.h>
+#include <mach/maple.h>
extern struct bus_type maple_bus_type;
@@ -33,6 +34,7 @@
void *sendbuf, *recvbuf, *recvbufdcsp;
unsigned char length;
enum maple_code command;
+ struct mutex mutex;
};
struct maple_devinfo {
@@ -69,7 +71,9 @@
unsigned long interval,
unsigned long function);
int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+ u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
#define to_maple_dev(n) container_of(n, struct maple_device, dev)
#define to_maple_driver(n) container_of(n, struct maple_driver, drv)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 866a3db..335288bf 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -744,6 +744,8 @@
struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
pte_t pte);
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+ unsigned long size);
unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *);
unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -1041,7 +1043,6 @@
extern void get_pfn_range_for_nid(unsigned int nid,
unsigned long *start_pfn, unsigned long *end_pfn);
extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
extern void free_bootmem_with_active_regions(int nid,
unsigned long max_low_pfn);
typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 54590a9..25aaccd 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -239,9 +239,6 @@
{
smp_wmb();
__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
- page_clear_dirty(page);
-#endif
}
static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a39b38c..69ed3cb 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -143,6 +143,29 @@
return 1;
}
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+ VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+ VM_BUG_ON(!in_atomic());
+# endif
+ VM_BUG_ON(page_count(page) == 0);
+ atomic_add(count, &page->_count);
+
+#else
+ if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+ return 0;
+#endif
+ VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+ return 1;
+}
+
static inline int page_freeze_refs(struct page *page, int count)
{
return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19c..ea96ead 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index c5f6e54..741d1a6 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -68,7 +68,8 @@
* @user_claim_unsupported: Whether the hardware supports exclusive
* RF-kill control by userspace. Set this before registering.
* @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions. It serializes callbacks
+ * and also protects the state.
* @data: Pointer to the RF button drivers private data which will be
* passed along when toggling radio state.
* @toggle_radio(): Mandatory handler to control state of the radio.
@@ -89,12 +90,13 @@
const char *name;
enum rfkill_type type;
- enum rfkill_state state;
bool user_claim_unsupported;
bool user_claim;
+ /* the mutex serializes callbacks and also protects
+ * the state */
struct mutex mutex;
-
+ enum rfkill_state state;
void *data;
int (*toggle_radio)(void *data, enum rfkill_state state);
int (*get_state)(void *data, enum rfkill_state *state);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ea44f6..a640385 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -316,7 +316,10 @@
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
- /* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+ __u8 do_not_encrypt:1;
+#endif
+ /* 0/13/14 bit hole */
#ifdef CONFIG_NET_DMA
dma_cookie_t dma_cookie;
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef..7a6e6bb 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@
LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */
LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */
LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */
+ LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */
+ LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */
__LINUX_MIB_MAX
};
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4dd3d93..b527210 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -206,8 +206,6 @@
* These flags are used with the @flags member of &ieee80211_tx_info.
*
* @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- * e.g., for EAPOL frame
* @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
* @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
* for combined 802.11g / 802.11b networks)
@@ -220,7 +218,6 @@
* @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
* @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
* through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
* @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
* @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
* @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +250,6 @@
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
- IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1),
IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2),
IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3),
IEEE80211_TX_CTL_NO_ACK = BIT(4),
@@ -263,7 +259,6 @@
IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8),
IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9),
IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10),
- IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11),
IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12),
IEEE80211_TX_CTL_AMPDU = BIT(13),
IEEE80211_TX_CTL_OFDM_HT = BIT(14),
@@ -323,7 +318,6 @@
struct ieee80211_vif *vif;
struct ieee80211_key_conf *hw_key;
unsigned long jiffies;
- int ifindex;
u16 aid;
s8 rts_cts_rate_idx, alt_retry_rate_idx;
u8 retry_limit;
@@ -746,7 +740,6 @@
* Measurement, Channel Switch, Quieting, TPC
*/
enum ieee80211_hw_flags {
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0,
IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3f..a379c90 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@
loops_per_jiffy &= ~loopbit;
}
}
- printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+ printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
}
diff --git a/init/main.c b/init/main.c
index 20fdc98..9c3b68b 100644
--- a/init/main.c
+++ b/init/main.c
@@ -635,10 +635,11 @@
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start && !initrd_below_start_ok &&
- page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+ page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
"disabling it.\n",
- page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+ page_to_pfn(virt_to_page((void *)initrd_start)),
+ min_low_pfn);
initrd_start = 0;
}
#endif
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 657f8f8..13932abd 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -355,32 +355,6 @@
return NULL;
}
-/*
- * allocate_cg_links() allocates "count" cg_cgroup_link structures
- * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
- * success or a negative error
- */
-static int allocate_cg_links(int count, struct list_head *tmp)
-{
- struct cg_cgroup_link *link;
- struct cg_cgroup_link *saved_link;
- int i;
- INIT_LIST_HEAD(tmp);
- for (i = 0; i < count; i++) {
- link = kmalloc(sizeof(*link), GFP_KERNEL);
- if (!link) {
- list_for_each_entry_safe(link, saved_link, tmp,
- cgrp_link_list) {
- list_del(&link->cgrp_link_list);
- kfree(link);
- }
- return -ENOMEM;
- }
- list_add(&link->cgrp_link_list, tmp);
- }
- return 0;
-}
-
static void free_cg_links(struct list_head *tmp)
{
struct cg_cgroup_link *link;
@@ -393,6 +367,27 @@
}
/*
+ * allocate_cg_links() allocates "count" cg_cgroup_link structures
+ * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
+ * success or a negative error
+ */
+static int allocate_cg_links(int count, struct list_head *tmp)
+{
+ struct cg_cgroup_link *link;
+ int i;
+ INIT_LIST_HEAD(tmp);
+ for (i = 0; i < count; i++) {
+ link = kmalloc(sizeof(*link), GFP_KERNEL);
+ if (!link) {
+ free_cg_links(tmp);
+ return -ENOMEM;
+ }
+ list_add(&link->cgrp_link_list, tmp);
+ }
+ return 0;
+}
+
+/*
* find_css_set() takes an existing cgroup group and a
* cgroup object, and returns a css_set object that's
* equivalent to the old group, but with the given cgroup
@@ -956,7 +951,6 @@
struct super_block *sb;
struct cgroupfs_root *root;
struct list_head tmp_cg_links;
- INIT_LIST_HEAD(&tmp_cg_links);
/* First find the desired set of subsystems */
ret = parse_cgroupfs_options(data, &opts);
@@ -1424,14 +1418,17 @@
if (buffer == NULL)
return -ENOMEM;
}
- if (nbytes && copy_from_user(buffer, userbuf, nbytes))
- return -EFAULT;
+ if (nbytes && copy_from_user(buffer, userbuf, nbytes)) {
+ retval = -EFAULT;
+ goto out;
+ }
buffer[nbytes] = 0; /* nul-terminate */
strstrip(buffer);
retval = cft->write_string(cgrp, cft, buffer);
if (!retval)
retval = nbytes;
+out:
if (buffer != local_buffer)
kfree(buffer);
return retval;
@@ -2371,7 +2368,7 @@
return cgroup_create(c_parent, dentry, mode | S_IFDIR);
}
-static inline int cgroup_has_css_refs(struct cgroup *cgrp)
+static int cgroup_has_css_refs(struct cgroup *cgrp)
{
/* Check the reference count on each subsystem. Since we
* already established that there are no tasks in the
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 91cf85b..d5ab79c 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -54,7 +54,6 @@
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/mutex.h>
-#include <linux/kfifo.h>
#include <linux/workqueue.h>
#include <linux/cgroup.h>
@@ -486,13 +485,38 @@
static void
update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
{
- if (!dattr)
- return;
if (dattr->relax_domain_level < c->relax_domain_level)
dattr->relax_domain_level = c->relax_domain_level;
return;
}
+static void
+update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+{
+ LIST_HEAD(q);
+
+ list_add(&c->stack_list, &q);
+ while (!list_empty(&q)) {
+ struct cpuset *cp;
+ struct cgroup *cont;
+ struct cpuset *child;
+
+ cp = list_first_entry(&q, struct cpuset, stack_list);
+ list_del(q.next);
+
+ if (cpus_empty(cp->cpus_allowed))
+ continue;
+
+ if (is_sched_load_balance(cp))
+ update_domain_attr(dattr, cp);
+
+ list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
+ child = cgroup_cs(cont);
+ list_add_tail(&child->stack_list, &q);
+ }
+ }
+}
+
/*
* rebuild_sched_domains()
*
@@ -532,7 +556,7 @@
* So the reverse nesting would risk an ABBA deadlock.
*
* The three key local variables below are:
- * q - a kfifo queue of cpuset pointers, used to implement a
+ * q - a linked-list queue of cpuset pointers, used to implement a
* top-down scan of all cpusets. This scan loads a pointer
* to each cpuset marked is_sched_load_balance into the
* array 'csa'. For our purposes, rebuilding the schedulers
@@ -567,7 +591,7 @@
void rebuild_sched_domains(void)
{
- struct kfifo *q; /* queue of cpusets to be scanned */
+ LIST_HEAD(q); /* queue of cpusets to be scanned*/
struct cpuset *cp; /* scans q */
struct cpuset **csa; /* array of all cpuset ptrs */
int csn; /* how many cpuset ptrs in csa so far */
@@ -577,7 +601,6 @@
int ndoms; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
- q = NULL;
csa = NULL;
doms = NULL;
dattr = NULL;
@@ -591,35 +614,42 @@
dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
if (dattr) {
*dattr = SD_ATTR_INIT;
- update_domain_attr(dattr, &top_cpuset);
+ update_domain_attr_tree(dattr, &top_cpuset);
}
*doms = top_cpuset.cpus_allowed;
goto rebuild;
}
- q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL);
- if (IS_ERR(q))
- goto done;
csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
if (!csa)
goto done;
csn = 0;
- cp = &top_cpuset;
- __kfifo_put(q, (void *)&cp, sizeof(cp));
- while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
+ list_add(&top_cpuset.stack_list, &q);
+ while (!list_empty(&q)) {
struct cgroup *cont;
struct cpuset *child; /* scans child cpusets of cp */
+ cp = list_first_entry(&q, struct cpuset, stack_list);
+ list_del(q.next);
+
if (cpus_empty(cp->cpus_allowed))
continue;
- if (is_sched_load_balance(cp))
+ /*
+ * All child cpusets contain a subset of the parent's cpus, so
+ * just skip them, and then we call update_domain_attr_tree()
+ * to calc relax_domain_level of the corresponding sched
+ * domain.
+ */
+ if (is_sched_load_balance(cp)) {
csa[csn++] = cp;
+ continue;
+ }
list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
child = cgroup_cs(cont);
- __kfifo_put(q, (void *)&child, sizeof(cp));
+ list_add_tail(&child->stack_list, &q);
}
}
@@ -686,7 +716,7 @@
cpus_or(*dp, *dp, b->cpus_allowed);
b->pn = -1;
if (dattr)
- update_domain_attr(dattr
+ update_domain_attr_tree(dattr
+ nslot, b);
}
}
@@ -702,8 +732,6 @@
put_online_cpus();
done:
- if (q && !IS_ERR(q))
- kfifo_free(q);
kfree(csa);
/* Don't kfree(doms) -- partition_sched_domains() does that. */
/* Don't kfree(dattr) -- partition_sched_domains() does that. */
@@ -1833,24 +1861,21 @@
*/
static void scan_for_empty_cpusets(const struct cpuset *root)
{
+ LIST_HEAD(queue);
struct cpuset *cp; /* scans cpusets being updated */
struct cpuset *child; /* scans child cpusets of cp */
- struct list_head queue;
struct cgroup *cont;
nodemask_t oldmems;
- INIT_LIST_HEAD(&queue);
-
list_add_tail((struct list_head *)&root->stack_list, &queue);
while (!list_empty(&queue)) {
- cp = container_of(queue.next, struct cpuset, stack_list);
+ cp = list_first_entry(&queue, struct cpuset, stack_list);
list_del(queue.next);
list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
child = cgroup_cs(cont);
list_add_tail(&child->stack_list, &queue);
}
- cont = cp->css.cgroup;
/* Continue past cpusets with all cpus, mems online */
if (cpus_subset(cp->cpus_allowed, cpu_online_map) &&
diff --git a/kernel/marker.c b/kernel/marker.c
index 971da53..7d1faec 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -126,6 +126,11 @@
struct marker_probe_closure *multi;
int i;
/*
+ * Read mdata->ptype before mdata->multi.
+ */
+ smp_rmb();
+ multi = mdata->multi;
+ /*
* multi points to an array, therefore accessing the array
* depends on reading multi. However, even in this case,
* we must insure that the pointer is read _before_ the array
@@ -133,7 +138,6 @@
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = mdata->multi;
for (i = 0; multi[i].func; i++) {
va_start(args, call_private);
multi[i].func(multi[i].probe_private, call_private,
@@ -175,6 +179,11 @@
struct marker_probe_closure *multi;
int i;
/*
+ * Read mdata->ptype before mdata->multi.
+ */
+ smp_rmb();
+ multi = mdata->multi;
+ /*
* multi points to an array, therefore accessing the array
* depends on reading multi. However, even in this case,
* we must insure that the pointer is read _before_ the array
@@ -182,7 +191,6 @@
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = mdata->multi;
for (i = 0; multi[i].func; i++)
multi[i].func(multi[i].probe_private, call_private,
mdata->format, &args);
diff --git a/kernel/printk.c b/kernel/printk.c
index a7f7559..b51b156 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1309,14 +1309,14 @@
#if defined CONFIG_PRINTK
-DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
/*
* printk rate limiting, lifted from the networking subsystem.
*
- * This enforces a rate limit: not more than one kernel message
- * every printk_ratelimit_jiffies to make a denial-of-service
- * attack impossible.
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
*/
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
int printk_ratelimit(void)
{
return __ratelimit(&printk_ratelimit_state);
diff --git a/kernel/resource.c b/kernel/resource.c
index 74af2d7..f5b518e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -490,7 +490,7 @@
{
switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) {
case IORESOURCE_SIZEALIGN:
- return res->end - res->start + 1;
+ return resource_size(res);
case IORESOURCE_STARTALIGN:
return res->start;
default:
diff --git a/kernel/sched.c b/kernel/sched.c
index 0236958..21f7da9 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7671,34 +7671,34 @@
}
#ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *page)
+static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+ char *page)
{
return sprintf(page, "%u\n", sched_mc_power_savings);
}
-static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
const char *buf, size_t count)
{
return sched_power_savings_store(buf, count, 0);
}
-static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
- sched_mc_power_savings_store);
+static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
+ sched_mc_power_savings_show,
+ sched_mc_power_savings_store);
#endif
#ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *page)
+static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+ char *page)
{
return sprintf(page, "%u\n", sched_smt_power_savings);
}
-static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
+static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
const char *buf, size_t count)
{
return sched_power_savings_store(buf, count, 1);
}
-static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show,
+static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
+ sched_smt_power_savings_show,
sched_smt_power_savings_store);
#endif
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ec7e4f6..4a26a13 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -830,10 +830,21 @@
start_workqueue_thread(cwq, -1);
} else {
cpu_maps_update_begin();
+ /*
+ * We must place this wq on list even if the code below fails.
+ * cpu_down(cpu) can remove cpu from cpu_populated_map before
+ * destroy_workqueue() takes the lock, in that case we leak
+ * cwq[cpu]->thread.
+ */
spin_lock(&workqueue_lock);
list_add(&wq->list, &workqueues);
spin_unlock(&workqueue_lock);
-
+ /*
+ * We must initialize cwqs for each possible cpu even if we
+ * are going to call destroy_workqueue() finally. Otherwise
+ * cpu_up() can hit the uninitialized cwq once we drop the
+ * lock.
+ */
for_each_possible_cpu(cpu) {
cwq = init_cpu_workqueue(wq, cpu);
if (err || !cpu_online(cpu))
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index 889ddce..a3b8d4c 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -80,11 +80,3 @@
}
}
EXPORT_SYMBOL(iommu_area_free);
-
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
-{
- unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
-
- return size >> PAGE_SHIFT;
-}
-EXPORT_SYMBOL(iommu_num_pages);
diff --git a/mm/filemap.c b/mm/filemap.c
index 42bbc69..d97d1ad 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1879,7 +1879,7 @@
* The !iov->iov_len check ensures we skip over unlikely
* zero-length segments (without overruning the iovec).
*/
- while (bytes || unlikely(!iov->iov_len && i->count)) {
+ while (bytes || unlikely(i->count && !iov->iov_len)) {
int copy;
copy = min(bytes, iov->iov_len - base);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 254ce2b..d237a02 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -17,7 +17,7 @@
#include <linux/mutex.h>
#include <linux/bootmem.h>
#include <linux/sysfs.h>
-
+#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/io.h>
diff --git a/mm/madvise.c b/mm/madvise.c
index 23a0ec3..f9349c1 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -132,10 +132,10 @@
* Application no longer needs these pages. If the pages are dirty,
* it's OK to just throw them away. The app will be more careful about
* data it wants to keep. Be sure to free swap resources too. The
- * zap_page_range call sets things up for refill_inactive to actually free
+ * zap_page_range call sets things up for shrink_active_list to actually free
* these pages later if no one else has touched them in the meantime,
* although we could add these pages to a global reuse list for
- * refill_inactive to pick up before reclaiming other pages.
+ * shrink_active_list to pick up before reclaiming other pages.
*
* NB: This interface discards data rather than pushes it out to swap,
* as some implementations do. This has performance implications for
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fba566c..7056c3b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1168,9 +1168,6 @@
mem = mem_cgroup_from_cont(cont);
old_mem = mem_cgroup_from_cont(old_cont);
- if (mem == old_mem)
- goto out;
-
/*
* Only thread group leaders are allowed to migrate, the mm_struct is
* in effect owned by the leader
diff --git a/mm/memory.c b/mm/memory.c
index 67f0ab9..0e4eea1 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -993,6 +993,30 @@
tlb_finish_mmu(tlb, address, end);
return end;
}
+EXPORT_SYMBOL_GPL(zap_page_range);
+
+/**
+ * zap_vma_ptes - remove ptes mapping the vma
+ * @vma: vm_area_struct holding ptes to be zapped
+ * @address: starting address of pages to zap
+ * @size: number of bytes to zap
+ *
+ * This function only unmaps ptes assigned to VM_PFNMAP vmas.
+ *
+ * The entire address range must be fully contained within the vma.
+ *
+ * Returns 0 if successful.
+ */
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+ unsigned long size)
+{
+ if (address < vma->vm_start || address + size > vma->vm_end ||
+ !(vma->vm_flags & VM_PFNMAP))
+ return -1;
+ zap_page_range(vma, address, size, NULL);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(zap_vma_ptes);
/*
* Do a quick page-table lookup for a single page.
@@ -1087,6 +1111,7 @@
}
return page;
}
+EXPORT_SYMBOL_GPL(follow_page);
/* Can we do the FOLL_ANON optimization? */
static inline int use_zero_page(struct vm_area_struct *vma)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3cf3d05..401d104 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3753,23 +3753,6 @@
return find_min_pfn_for_node(MAX_NUMNODES);
}
-/**
- * find_max_pfn_with_active_regions - Find the maximum PFN registered
- *
- * It returns the maximum PFN based on information provided via
- * add_active_range().
- */
-unsigned long __init find_max_pfn_with_active_regions(void)
-{
- int i;
- unsigned long max_pfn = 0;
-
- for (i = 0; i < nr_nodemap_entries; i++)
- max_pfn = max(max_pfn, early_node_map[i].end_pfn);
-
- return max_pfn;
-}
-
/*
* early_calculate_totalpages()
* Sum pages in active regions for movable zone.
diff --git a/mm/rmap.c b/mm/rmap.c
index 99bc3f9..94a5246 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -667,7 +667,8 @@
* Leaving it set also helps swapoff to reinstate ptes
* faster for those pages still in swapcache.
*/
- if (page_test_dirty(page)) {
+ if ((!PageAnon(page) || PageSwapCache(page)) &&
+ page_test_dirty(page)) {
page_clear_dirty(page);
set_page_dirty(page);
}
diff --git a/mm/swap.c b/mm/swap.c
index dd89234..7417a2a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -278,9 +278,10 @@
* Avoid taking zone->lru_lock if possible, but if it is taken, retain it
* for the remainder of the operation.
*
- * The locking in this function is against shrink_cache(): we recheck the
- * page count inside the lock to see whether shrink_cache grabbed the page
- * via the LRU. If it did, give up: shrink_cache will free it.
+ * The locking in this function is against shrink_inactive_list(): we recheck
+ * the page count inside the lock to see whether shrink_inactive_list()
+ * grabbed the page via the LRU. If it did, give up: shrink_inactive_list()
+ * will free it.
*/
void release_pages(struct page **pages, int nr, int cold)
{
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6beb625..bb7f796 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -656,8 +656,8 @@
if (!down_read_trylock(&mm->mmap_sem)) {
/*
- * Activate page so shrink_cache is unlikely to unmap its
- * ptes while lock is dropped, so swapoff can make progress.
+ * Activate page so shrink_inactive_list is unlikely to unmap
+ * its ptes while lock is dropped, so swapoff can make progress.
*/
activate_page(page);
unlock_page(page);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8f71761..75be453 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1408,7 +1408,7 @@
if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ/10);
}
- /* top priority shrink_caches still had more to do? don't OOM, then */
+ /* top priority shrink_zones still had more to do? don't OOM, then */
if (!sc->all_unreclaimable && scan_global_lru(sc))
ret = nr_reclaimed;
out:
@@ -1979,7 +1979,7 @@
int zone_reclaim_mode __read_mostly;
#define RECLAIM_OFF 0
-#define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */
+#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */
#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
#define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */
diff --git a/net/Kconfig b/net/Kconfig
index b986687..7612cc8 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,9 +2,7 @@
# Network configuration
#
-menu "Networking"
-
-config NET
+menuconfig NET
bool "Networking support"
---help---
Unless you really know what you are doing, you should say Y here.
@@ -22,7 +20,6 @@
recommended to read the NET-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-# Make sure that all config symbols are dependent on NET
if NET
menu "Networking options"
@@ -252,5 +249,3 @@
source "net/9p/Kconfig"
endif # if NET
-endmenu # Networking
-
diff --git a/net/core/dev.c b/net/core/dev.c
index 8d13a9b..63d6bcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2100,7 +2100,7 @@
rxq = &dev->rx_queue;
q = rxq->qdisc;
- if (q) {
+ if (q != &noop_qdisc) {
spin_lock(qdisc_lock(q));
result = qdisc_enqueue_root(skb, q);
spin_unlock(qdisc_lock(q));
@@ -2113,7 +2113,7 @@
struct packet_type **pt_prev,
int *ret, struct net_device *orig_dev)
{
- if (!skb->dev->rx_queue.qdisc)
+ if (skb->dev->rx_queue.qdisc == &noop_qdisc)
goto out;
if (*pt_prev) {
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4e0c922..8464017 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -485,6 +485,9 @@
C(head);
C(data);
C(truesize);
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+ C(do_not_encrypt);
+#endif
atomic_set(&n->users, 1);
atomic_inc(&(skb_shinfo(skb)->dataref));
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 834356e..8f5a403 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -232,6 +232,8 @@
SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD),
SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO),
SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS),
+ SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND),
+ SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED),
SNMP_MIB_SENTINEL
};
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a2b06d0..b3875c0 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1116,18 +1116,12 @@
return 0;
if (hash_expected && !hash_location) {
- LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
- "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
- NIPQUAD(iph->saddr), ntohs(th->source),
- NIPQUAD(iph->daddr), ntohs(th->dest));
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
return 1;
}
if (!hash_expected && hash_location) {
- LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
- "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
- NIPQUAD(iph->saddr), ntohs(th->source),
- NIPQUAD(iph->daddr), ntohs(th->dest));
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
return 1;
}
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index f7b535d..410046a 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -732,7 +732,7 @@
LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n",
cmsg->cmsg_type);
err = -EINVAL;
- break;
+ goto exit_f;
}
}
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index f82f607..0179b66 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -286,7 +286,6 @@
void ipv6_misc_proc_exit(void)
{
- proc_net_remove(&init_net, "sockstat6");
proc_net_remove(&init_net, "dev_snmp6");
proc_net_remove(&init_net, "snmp6");
unregister_pernet_subsys(&ipv6_proc_ops);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index cff778b..1db4521 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -849,28 +849,17 @@
hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr);
hash_location = tcp_parse_md5sig_option(th);
- /* do we have a hash as expected? */
- if (!hash_expected) {
- if (!hash_location)
- return 0;
- if (net_ratelimit()) {
- printk(KERN_INFO "MD5 Hash NOT expected but found "
- "(" NIP6_FMT ", %u)->"
- "(" NIP6_FMT ", %u)\n",
- NIP6(ip6h->saddr), ntohs(th->source),
- NIP6(ip6h->daddr), ntohs(th->dest));
- }
+ /* We've parsed the options - do we have a hash? */
+ if (!hash_expected && !hash_location)
+ return 0;
+
+ if (hash_expected && !hash_location) {
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
return 1;
}
- if (!hash_location) {
- if (net_ratelimit()) {
- printk(KERN_INFO "MD5 Hash expected but NOT found "
- "(" NIP6_FMT ", %u)->"
- "(" NIP6_FMT ", %u)\n",
- NIP6(ip6h->saddr), ntohs(th->source),
- NIP6(ip6h->daddr), ntohs(th->dest));
- }
+ if (!hash_expected && hash_location) {
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
return 1;
}
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e7ba0e..297c257 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -81,6 +81,7 @@
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct net_device *dev;
enum ieee80211_if_types itype;
struct ieee80211_sub_if_data *sdata;
@@ -95,6 +96,9 @@
if (itype == IEEE80211_IF_TYPE_INVALID)
return -EINVAL;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ret = ieee80211_if_change_type(sdata, itype);
@@ -117,12 +121,16 @@
u8 key_idx, u8 *mac_addr,
struct key_params *params)
{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
enum ieee80211_key_alg alg;
struct ieee80211_key *key;
int err;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (params->cipher) {
@@ -167,10 +175,14 @@
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, u8 *mac_addr)
{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
@@ -211,7 +223,8 @@
void (*callback)(void *cookie,
struct key_params *params))
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
u8 seq[6] = {0};
struct key_params params;
@@ -220,6 +233,11 @@
u16 iv16;
int err = -ENOENT;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
rcu_read_lock();
if (mac_addr) {
@@ -293,8 +311,12 @@
struct net_device *dev,
u8 key_idx)
{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
rcu_read_lock();
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -475,9 +497,15 @@
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@@ -492,9 +520,15 @@
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@@ -508,9 +542,15 @@
static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
@@ -646,11 +686,14 @@
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_parameters *params)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
int err;
+ if (dev == local->mdev || params->vlan == local->mdev)
+ return -EOPNOTSUPP;
+
/* Prevent a race with changing the rate control algorithm */
if (!netif_running(dev))
return -ENETDOWN;
@@ -701,10 +744,15 @@
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = sdata->local;
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (mac) {
rcu_read_lock();
@@ -730,10 +778,13 @@
u8 *mac,
struct station_parameters *params)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
+ if (dev == local->mdev || params->vlan == local->mdev)
+ return -EOPNOTSUPP;
+
rcu_read_lock();
/* XXX: get sta belonging to dev */
@@ -752,7 +803,7 @@
return -EINVAL;
}
- sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+ sta->sdata = vlansdata;
ieee80211_send_layer2_update(sta);
}
@@ -767,15 +818,20 @@
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
int err;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -ENETDOWN;
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@@ -817,14 +873,19 @@
struct net_device *dev,
u8 *dst, u8 *next_hop)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -ENETDOWN;
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@@ -891,9 +952,15 @@
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
@@ -913,9 +980,15 @@
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
return -ENOTSUPP;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f1a83d4..a4c5b90 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1233,18 +1233,12 @@
/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
* make a prepared TX frame (one that has been given to hw) to look like brand
* new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
+ */
static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
struct ieee80211_key *key,
struct sk_buff *skb)
{
int hdrlen, iv_len, mic_len;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS |
- IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
- IEEE80211_TX_CTL_REQUEUE |
- IEEE80211_TX_CTL_EAPOL_FRAME;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
@@ -1731,8 +1725,8 @@
result = ieee80211_wep_init(local);
if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep\n",
- wiphy_name(local->hw.wiphy));
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
goto fail_wep;
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d7c371e..acb0413 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -606,7 +606,6 @@
int encrypt)
{
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_tx_info *info;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
skb->dev = sdata->local->mdev;
@@ -614,11 +613,8 @@
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
- info = IEEE80211_SKB_CB(skb);
- memset(info, 0, sizeof(struct ieee80211_tx_info));
- info->control.ifindex = sdata->dev->ifindex;
- if (!encrypt)
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ skb->iif = sdata->dev->ifindex;
+ skb->do_not_encrypt = !encrypt;
dev_queue_xmit(skb);
}
@@ -3303,6 +3299,7 @@
ifsta = &sdata->u.sta;
ifsta->state = IEEE80211_MESH_UP;
ieee80211_sta_timer((unsigned long)sdata);
+ ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
}
#endif
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0fbadd8..69019e9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -305,7 +305,7 @@
rcu_read_unlock();
local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
wiphy_name(local->hw.wiphy), purged);
#endif
@@ -342,7 +342,7 @@
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: BC TX buffer full - "
"dropping the oldest frame\n",
@@ -389,7 +389,7 @@
purge_old_ps_buffers(tx->local);
if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: STA %s TX "
"buffer full - dropping oldest frame\n",
@@ -439,14 +439,14 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
u16 fc = tx->fc;
- if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ if (unlikely(tx->skb->do_not_encrypt))
tx->key = NULL;
else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
tx->key = key;
else if ((key = rcu_dereference(tx->sdata->default_key)))
tx->key = key;
else if (tx->sdata->drop_unencrypted &&
- !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+ (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED)) {
I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
return TX_DROP;
@@ -476,7 +476,7 @@
}
if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ tx->skb->do_not_encrypt = 1;
return TX_CONTINUE;
}
@@ -732,6 +732,7 @@
memcpy(skb_put(frag, copylen), pos, copylen);
memcpy(frag->cb, first->cb, sizeof(frag->cb));
skb_copy_queue_mapping(frag, first);
+ frag->do_not_encrypt = first->do_not_encrypt;
pos += copylen;
left -= copylen;
@@ -852,7 +853,7 @@
sband = tx->local->hw.wiphy->bands[tx->channel->band];
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ skb->do_not_encrypt = 1;
info->flags |= IEEE80211_TX_CTL_INJECTED;
tx->flags &= ~IEEE80211_TX_FRAGMENTED;
@@ -925,8 +926,7 @@
skb_trim(skb, skb->len - FCS_LEN);
}
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
- info->flags &=
- ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+ tx->skb->do_not_encrypt = 0;
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
tx->flags |= IEEE80211_TX_FRAGMENTED;
break;
@@ -1042,10 +1042,9 @@
struct sk_buff *skb,
struct net_device *mdev)
{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct net_device *dev;
- dev = dev_get_by_index(&init_net, info->control.ifindex);
+ dev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
dev_put(dev);
dev = NULL;
@@ -1306,8 +1305,8 @@
bool may_encrypt;
int ret;
- if (info->control.ifindex)
- odev = dev_get_by_index(&init_net, info->control.ifindex);
+ if (skb->iif)
+ odev = dev_get_by_index(&init_net, skb->iif);
if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
dev_put(odev);
odev = NULL;
@@ -1321,9 +1320,13 @@
return 0;
}
+ memset(info, 0, sizeof(*info));
+
+ info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
osdata = IEEE80211_DEV_TO_SUB_IF(odev);
- may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+ may_encrypt = !skb->do_not_encrypt;
headroom = osdata->local->tx_headroom;
if (may_encrypt)
@@ -1348,7 +1351,6 @@
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_radiotap_header *prthdr =
(struct ieee80211_radiotap_header *)skb->data;
u16 len_rthdr;
@@ -1371,11 +1373,11 @@
skb->dev = local->mdev;
/* needed because we set skb device to master */
- info->control.ifindex = dev->ifindex;
+ skb->iif = dev->ifindex;
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
- /* Interfaces should always request a status report */
- info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ /* sometimes we do encrypt injected frames, will be fixed
+ * up in radiotap parser if not wanted */
+ skb->do_not_encrypt = 0;
/*
* fix up the pointers accounting for the radiotap
@@ -1419,7 +1421,6 @@
struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_tx_info *info;
struct ieee80211_sub_if_data *sdata;
int ret = 1, head_need;
u16 ethertype, hdrlen, meshhdrlen = 0;
@@ -1645,14 +1646,7 @@
nh_pos += hdrlen;
h_pos += hdrlen;
- info = IEEE80211_SKB_CB(skb);
- memset(info, 0, sizeof(*info));
- info->control.ifindex = dev->ifindex;
- if (ethertype == ETH_P_PAE)
- info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
- /* Interfaces should always request a status report */
- info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ skb->iif = dev->ifindex;
skb->dev = local->mdev;
dev->stats.tx_packets++;
@@ -1922,6 +1916,8 @@
info = IEEE80211_SKB_CB(skb);
+ skb->do_not_encrypt = 1;
+
info->band = band;
rate_control_get_rate(local->mdev, sband, skb, &rsel);
@@ -1931,7 +1927,7 @@
"no rate found\n",
wiphy_name(local->hw.wiphy));
}
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
skb = NULL;
goto out;
}
@@ -1940,7 +1936,6 @@
info->tx_rate_idx = rsel.rate_idx;
info->flags |= IEEE80211_TX_CTL_NO_ACK;
- info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
if (sdata->bss_conf.use_short_preamble &&
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 872d2fc..5c2bf0a 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -31,13 +31,13 @@
local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_tx_tfm))
- return -ENOMEM;
+ return PTR_ERR(local->wep_tx_tfm);
local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(local->wep_rx_tfm)) {
crypto_free_blkcipher(local->wep_tx_tfm);
- return -ENOMEM;
+ return PTR_ERR(local->wep_rx_tfm);
}
return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 07edda0..28437f0 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -188,6 +188,9 @@
{
int i;
+ /* XXX: currently broken due to cb/requeue use */
+ return -EPERM;
+
/* prepare the filter and save it for the SW queue
* matching the received HW queue */
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 7a560b7..c6f2f38 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -130,7 +130,6 @@
/**
* rfkill_toggle_radio - wrapper for toggle_radio hook
- *
* @rfkill: the rfkill struct to use
* @force: calls toggle_radio even if cache says it is not needed,
* and also makes sure notifications of the state will be
@@ -141,8 +140,8 @@
* calls and handling all the red tape such as issuing notifications
* if the call is successful.
*
- * Note that @force cannot override a (possibly cached) state of
- * RFKILL_STATE_HARD_BLOCKED. Any device making use of
+ * Note that the @force parameter cannot override a (possibly cached)
+ * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of
* RFKILL_STATE_HARD_BLOCKED implements either get_state() or
* rfkill_force_state(), so the cache either is bypassed or valid.
*
@@ -150,7 +149,7 @@
* even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
* give the driver a hint that it should double-BLOCK the transmitter.
*
- * Caller must have aquired rfkill_mutex.
+ * Caller must have acquired rfkill->mutex.
*/
static int rfkill_toggle_radio(struct rfkill *rfkill,
enum rfkill_state state,
@@ -200,12 +199,12 @@
/**
* rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affeceted
+ * @type: type of interfaces to be affected
* @state: the new state
*
- * This function toggles state of all switches of given type unless
- * a specific switch is claimed by userspace in which case it is
- * left alone.
+ * This function toggles the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone).
*/
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
{
@@ -216,8 +215,11 @@
rfkill_states[type] = state;
list_for_each_entry(rfkill, &rfkill_list, node) {
- if ((!rfkill->user_claim) && (rfkill->type == type))
+ if ((!rfkill->user_claim) && (rfkill->type == type)) {
+ mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill, state, 0);
+ mutex_unlock(&rfkill->mutex);
+ }
}
mutex_unlock(&rfkill_mutex);
@@ -228,7 +230,7 @@
* rfkill_epo - emergency power off all transmitters
*
* This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex.
+ * everything in its path but rfkill_mutex and rfkill->mutex.
*/
void rfkill_epo(void)
{
@@ -236,7 +238,9 @@
mutex_lock(&rfkill_mutex);
list_for_each_entry(rfkill, &rfkill_list, node) {
+ mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+ mutex_unlock(&rfkill->mutex);
}
mutex_unlock(&rfkill_mutex);
}
@@ -252,7 +256,12 @@
* a notification by the firmware/hardware of the current *real*
* state of the radio rfkill switch.
*
- * It may not be called from an atomic context.
+ * Devices which are subject to external changes on their rfkill
+ * state (such as those caused by a hardware rfkill line) MUST
+ * have their driver arrange to call rfkill_force_state() as soon
+ * as possible after such a change.
+ *
+ * This function may not be called from an atomic context.
*/
int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
{
@@ -367,6 +376,9 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (rfkill->user_claim_unsupported)
+ return -EOPNOTSUPP;
+
/*
* Take the global lock to make sure the kernel is not in
* the middle of rfkill_switch_all
@@ -375,19 +387,17 @@
if (error)
return error;
- if (rfkill->user_claim_unsupported) {
- error = -EOPNOTSUPP;
- goto out_unlock;
- }
if (rfkill->user_claim != claim) {
- if (!claim)
+ if (!claim) {
+ mutex_lock(&rfkill->mutex);
rfkill_toggle_radio(rfkill,
rfkill_states[rfkill->type],
0);
+ mutex_unlock(&rfkill->mutex);
+ }
rfkill->user_claim = claim;
}
-out_unlock:
mutex_unlock(&rfkill_mutex);
return error ? error : count;
@@ -516,8 +526,11 @@
{
mutex_lock(&rfkill_mutex);
list_del_init(&rfkill->node);
- rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
mutex_unlock(&rfkill_mutex);
+
+ mutex_lock(&rfkill->mutex);
+ rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+ mutex_unlock(&rfkill->mutex);
}
/**
@@ -526,9 +539,10 @@
* @type: type of the switch (RFKILL_TYPE_*)
*
* This function should be called by the network driver when it needs
- * rfkill structure. Once the structure is allocated the driver shoud
- * finish its initialization by setting name, private data, enable_radio
+ * rfkill structure. Once the structure is allocated the driver should
+ * finish its initialization by setting the name, private data, enable_radio
* and disable_radio methods and then register it with rfkill_register().
+ *
* NOTE: If registration fails the structure shoudl be freed by calling
* rfkill_free() otherwise rfkill_unregister() should be used.
*/
@@ -560,7 +574,7 @@
* rfkill_free - Mark rfkill structure for deletion
* @rfkill: rfkill structure to be destroyed
*
- * Decrements reference count of rfkill structure so it is destroyed.
+ * Decrements reference count of the rfkill structure so it is destroyed.
* Note that rfkill_free() should _not_ be called after rfkill_unregister().
*/
void rfkill_free(struct rfkill *rfkill)
@@ -585,8 +599,10 @@
static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
{
#ifdef CONFIG_RFKILL_LEDS
- if (rfkill->led_trigger.name)
+ if (rfkill->led_trigger.name) {
led_trigger_unregister(&rfkill->led_trigger);
+ rfkill->led_trigger.name = NULL;
+ }
#endif
}
@@ -622,8 +638,8 @@
error = device_add(dev);
if (error) {
- rfkill_led_trigger_unregister(rfkill);
rfkill_remove_switch(rfkill);
+ rfkill_led_trigger_unregister(rfkill);
return error;
}
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index b060164..4840aff 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -572,44 +572,21 @@
static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
struct Qdisc *qdisc)
{
+ struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
spinlock_t *root_lock;
- struct Qdisc *oqdisc;
- int ingress;
-
- ingress = 0;
- if (qdisc && qdisc->flags&TCQ_F_INGRESS)
- ingress = 1;
-
- if (ingress) {
- oqdisc = dev_queue->qdisc;
- } else {
- oqdisc = dev_queue->qdisc_sleeping;
- }
root_lock = qdisc_root_lock(oqdisc);
spin_lock_bh(root_lock);
- if (ingress) {
- /* Prune old scheduler */
- if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) {
- /* delete */
- qdisc_reset(oqdisc);
- dev_queue->qdisc = NULL;
- } else { /* new */
- dev_queue->qdisc = qdisc;
- }
+ /* Prune old scheduler */
+ if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+ qdisc_reset(oqdisc);
- } else {
- /* Prune old scheduler */
- if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
- qdisc_reset(oqdisc);
-
- /* ... and graft new one */
- if (qdisc == NULL)
- qdisc = &noop_qdisc;
- dev_queue->qdisc_sleeping = qdisc;
- dev_queue->qdisc = &noop_qdisc;
- }
+ /* ... and graft new one */
+ if (qdisc == NULL)
+ qdisc = &noop_qdisc;
+ dev_queue->qdisc_sleeping = qdisc;
+ dev_queue->qdisc = &noop_qdisc;
spin_unlock_bh(root_lock);
@@ -678,7 +655,8 @@
ingress = 0;
num_q = dev->num_tx_queues;
- if (q && q->flags & TCQ_F_INGRESS) {
+ if ((q && q->flags & TCQ_F_INGRESS) ||
+ (new && new->flags & TCQ_F_INGRESS)) {
num_q = 1;
ingress = 1;
}
@@ -692,13 +670,10 @@
if (!ingress)
dev_queue = netdev_get_tx_queue(dev, i);
- if (ingress) {
- old = dev_graft_qdisc(dev_queue, q);
- } else {
- old = dev_graft_qdisc(dev_queue, new);
- if (new && i > 0)
- atomic_inc(&new->refcnt);
- }
+ old = dev_graft_qdisc(dev_queue, new);
+ if (new && i > 0)
+ atomic_inc(&new->refcnt);
+
notify_and_destroy(skb, n, classid, old, new);
}
@@ -817,7 +792,7 @@
goto err_out3;
}
}
- if (parent)
+ if (parent && !(sch->flags & TCQ_F_INGRESS))
list_add_tail(&sch->list, &dev_queue->qdisc->list);
return sch;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index fd2a6ca..345838a 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -596,7 +596,7 @@
int *need_watchdog_p = _need_watchdog;
rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
- if (new_qdisc != &noqueue_qdisc)
+ if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
*need_watchdog_p = 1;
}
@@ -619,6 +619,7 @@
need_watchdog = 0;
netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog);
+ transition_one_qdisc(dev, &dev->rx_queue, NULL);
if (need_watchdog) {
dev->trans_start = jiffies;
@@ -677,6 +678,7 @@
bool running;
netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
+ dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
dev_watchdog_down(dev);
@@ -718,7 +720,7 @@
void dev_init_scheduler(struct net_device *dev)
{
netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
- dev_init_scheduler_queue(dev, &dev->rx_queue, NULL);
+ dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev);
}
@@ -745,6 +747,6 @@
void dev_shutdown(struct net_device *dev)
{
netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
- shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
+ shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
WARN_ON(timer_pending(&dev->watchdog_timer));
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b7fefff..59eb2cf 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -29,16 +29,16 @@
};
/* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct genl_info *info,
+static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
struct cfg80211_registered_device **drv,
struct net_device **dev)
{
int ifindex;
- if (!info->attrs[NL80211_ATTR_IFINDEX])
+ if (!attrs[NL80211_ATTR_IFINDEX])
return -EINVAL;
- ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+ ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
*dev = dev_get_by_index(&init_net, ifindex);
if (!*dev)
return -ENODEV;
@@ -291,21 +291,31 @@
mutex_lock(&cfg80211_drv_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
- if (++wp_idx < wp_start)
+ if (wp_idx < wp_start) {
+ wp_idx++;
continue;
+ }
if_idx = 0;
mutex_lock(&dev->devlist_mtx);
list_for_each_entry(wdev, &dev->netdev_list, list) {
- if (++if_idx < if_start)
+ if (if_idx < if_start) {
+ if_idx++;
continue;
+ }
if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
- wdev->netdev) < 0)
- break;
+ wdev->netdev) < 0) {
+ mutex_unlock(&dev->devlist_mtx);
+ goto out;
+ }
+ if_idx++;
}
mutex_unlock(&dev->devlist_mtx);
+
+ wp_idx++;
}
+ out:
mutex_unlock(&cfg80211_drv_mutex);
cb->args[0] = wp_idx;
@@ -321,7 +331,7 @@
struct net_device *netdev;
int err;
- err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
if (err)
return err;
@@ -392,7 +402,7 @@
} else
return -EINVAL;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
ifindex = dev->ifindex;
@@ -477,7 +487,7 @@
int ifindex, err;
struct net_device *dev;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
ifindex = dev->ifindex;
@@ -545,7 +555,7 @@
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -618,7 +628,7 @@
if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
return -EINVAL;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -699,7 +709,7 @@
return -EINVAL;
}
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -735,7 +745,7 @@
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -764,7 +774,7 @@
struct beacon_parameters params;
int haveinfo = 0;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -843,7 +853,7 @@
int err;
struct net_device *dev;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -937,67 +947,78 @@
}
static int nl80211_dump_station(struct sk_buff *skb,
- struct netlink_callback *cb)
+ struct netlink_callback *cb)
{
- int wp_idx = 0;
- int if_idx = 0;
- int sta_idx = cb->args[2];
- int wp_start = cb->args[0];
- int if_start = cb->args[1];
struct station_info sinfo;
struct cfg80211_registered_device *dev;
- struct wireless_dev *wdev;
+ struct net_device *netdev;
u8 mac_addr[ETH_ALEN];
+ int ifidx = cb->args[0];
+ int sta_idx = cb->args[1];
int err;
- int exit = 0;
- /* TODO: filter by device */
- mutex_lock(&cfg80211_drv_mutex);
- list_for_each_entry(dev, &cfg80211_drv_list, list) {
- if (exit)
- break;
- if (++wp_idx < wp_start)
- continue;
- if_idx = 0;
+ if (!ifidx) {
+ err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+ nl80211_fam.attrbuf, nl80211_fam.maxattr,
+ nl80211_policy);
+ if (err)
+ return err;
- mutex_lock(&dev->devlist_mtx);
- list_for_each_entry(wdev, &dev->netdev_list, list) {
- if (exit)
- break;
- if (++if_idx < if_start)
- continue;
- if (!dev->ops->dump_station)
- continue;
+ if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+ return -EINVAL;
- for (;; ++sta_idx) {
- rtnl_lock();
- err = dev->ops->dump_station(&dev->wiphy,
- wdev->netdev, sta_idx, mac_addr,
- &sinfo);
- rtnl_unlock();
- if (err) {
- sta_idx = 0;
- break;
- }
- if (nl80211_send_station(skb,
- NETLINK_CB(cb->skb).pid,
- cb->nlh->nlmsg_seq, NLM_F_MULTI,
- wdev->netdev, mac_addr,
- &sinfo) < 0) {
- exit = 1;
- break;
- }
- }
- }
- mutex_unlock(&dev->devlist_mtx);
+ ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+ if (!ifidx)
+ return -EINVAL;
}
- mutex_unlock(&cfg80211_drv_mutex);
- cb->args[0] = wp_idx;
- cb->args[1] = if_idx;
- cb->args[2] = sta_idx;
+ netdev = dev_get_by_index(&init_net, ifidx);
+ if (!netdev)
+ return -ENODEV;
- return skb->len;
+ dev = cfg80211_get_dev_from_ifindex(ifidx);
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_put_netdev;
+ }
+
+ if (!dev->ops->dump_station) {
+ err = -ENOSYS;
+ goto out_err;
+ }
+
+ rtnl_lock();
+
+ while (1) {
+ err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
+ mac_addr, &sinfo);
+ if (err == -ENOENT)
+ break;
+ if (err)
+ goto out_err_rtnl;
+
+ if (nl80211_send_station(skb,
+ NETLINK_CB(cb->skb).pid,
+ cb->nlh->nlmsg_seq, NLM_F_MULTI,
+ netdev, mac_addr,
+ &sinfo) < 0)
+ goto out;
+
+ sta_idx++;
+ }
+
+
+ out:
+ cb->args[1] = sta_idx;
+ err = skb->len;
+ out_err_rtnl:
+ rtnl_unlock();
+ out_err:
+ cfg80211_put_dev(dev);
+ out_put_netdev:
+ dev_put(netdev);
+
+ return err;
}
static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@@ -1016,7 +1037,7 @@
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1112,7 +1133,7 @@
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1172,7 +1193,7 @@
¶ms.station_flags))
return -EINVAL;
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1207,7 +1228,7 @@
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1277,68 +1298,78 @@
}
static int nl80211_dump_mpath(struct sk_buff *skb,
- struct netlink_callback *cb)
+ struct netlink_callback *cb)
{
- int wp_idx = 0;
- int if_idx = 0;
- int sta_idx = cb->args[2];
- int wp_start = cb->args[0];
- int if_start = cb->args[1];
struct mpath_info pinfo;
struct cfg80211_registered_device *dev;
- struct wireless_dev *wdev;
+ struct net_device *netdev;
u8 dst[ETH_ALEN];
u8 next_hop[ETH_ALEN];
+ int ifidx = cb->args[0];
+ int path_idx = cb->args[1];
int err;
- int exit = 0;
- /* TODO: filter by device */
- mutex_lock(&cfg80211_drv_mutex);
- list_for_each_entry(dev, &cfg80211_drv_list, list) {
- if (exit)
- break;
- if (++wp_idx < wp_start)
- continue;
- if_idx = 0;
+ if (!ifidx) {
+ err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+ nl80211_fam.attrbuf, nl80211_fam.maxattr,
+ nl80211_policy);
+ if (err)
+ return err;
- mutex_lock(&dev->devlist_mtx);
- list_for_each_entry(wdev, &dev->netdev_list, list) {
- if (exit)
- break;
- if (++if_idx < if_start)
- continue;
- if (!dev->ops->dump_mpath)
- continue;
+ if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+ return -EINVAL;
- for (;; ++sta_idx) {
- rtnl_lock();
- err = dev->ops->dump_mpath(&dev->wiphy,
- wdev->netdev, sta_idx, dst,
- next_hop, &pinfo);
- rtnl_unlock();
- if (err) {
- sta_idx = 0;
- break;
- }
- if (nl80211_send_mpath(skb,
- NETLINK_CB(cb->skb).pid,
- cb->nlh->nlmsg_seq, NLM_F_MULTI,
- wdev->netdev, dst, next_hop,
- &pinfo) < 0) {
- exit = 1;
- break;
- }
- }
- }
- mutex_unlock(&dev->devlist_mtx);
+ ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+ if (!ifidx)
+ return -EINVAL;
}
- mutex_unlock(&cfg80211_drv_mutex);
- cb->args[0] = wp_idx;
- cb->args[1] = if_idx;
- cb->args[2] = sta_idx;
+ netdev = dev_get_by_index(&init_net, ifidx);
+ if (!netdev)
+ return -ENODEV;
- return skb->len;
+ dev = cfg80211_get_dev_from_ifindex(ifidx);
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_put_netdev;
+ }
+
+ if (!dev->ops->dump_mpath) {
+ err = -ENOSYS;
+ goto out_err;
+ }
+
+ rtnl_lock();
+
+ while (1) {
+ err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
+ dst, next_hop, &pinfo);
+ if (err == -ENOENT)
+ break;
+ if (err)
+ goto out_err_rtnl;
+
+ if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
+ cb->nlh->nlmsg_seq, NLM_F_MULTI,
+ netdev, dst, next_hop,
+ &pinfo) < 0)
+ goto out;
+
+ path_idx++;
+ }
+
+
+ out:
+ cb->args[1] = path_idx;
+ err = skb->len;
+ out_err_rtnl:
+ rtnl_unlock();
+ out_err:
+ cfg80211_put_dev(dev);
+ out_put_netdev:
+ dev_put(netdev);
+
+ return err;
}
static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@@ -1358,7 +1389,7 @@
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1411,7 +1442,7 @@
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1446,7 +1477,7 @@
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
@@ -1475,7 +1506,7 @@
if (info->attrs[NL80211_ATTR_MAC])
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
- err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
return err;
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8f038e6..418cd7d 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@
* marked __initdata will be discarded when the module has been intialized.
* Likewise for modules used built-in the sections marked __exit
* are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
* The check_sec_ref() function traverses all relocation records
* to find all references to a section that reference a section that will
* be discarded and warns about it.
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 40d06c5..3ae9bec 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -998,8 +998,12 @@
int rc;
rc = selinux_get_mnt_opts(sb, &opts);
- if (rc)
+ if (rc) {
+ /* before policy load we may get EINVAL, don't show anything */
+ if (rc == -EINVAL)
+ rc = 0;
return rc;
+ }
selinux_write_opts(m, &opts);
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 9ca1133..54df8ba 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -42,7 +42,7 @@
#include <sound/info.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
#include "aica.h"
MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");