V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TeVii_S470
The card tested by me (Igor).
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 0b050bc..dbc59d2 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -166,6 +166,10 @@
.name = "TurboSight TBS 6920",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_TEVII_S470] = {
+ .name = "TeVii S470",
+ .portb = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -253,6 +257,10 @@
.subvendor = 0x6920,
.subdevice = 0x8888,
.card = CX23885_BOARD_TBS_6920,
+ }, {
+ .subvendor = 0xd470,
+ .subdevice = 0x9022,
+ .card = CX23885_BOARD_TEVII_S470,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -561,6 +569,7 @@
cx_set(GP0_IO, 0x00040004);
break;
case CX23885_BOARD_TBS_6920:
+ case CX23885_BOARD_TEVII_S470:
cx_write(MC417_CTL, 0x00000036);
cx_write(MC417_OEN, 0x00001000);
cx_write(MC417_RWD, 0x00001800);
@@ -645,6 +654,7 @@
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_TBS_6920:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 3e0b040..a6b62a7 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -327,6 +327,10 @@
.demod_address = 0x05,
};
+static struct cx24116_config tevii_cx24116_config = {
+ .demod_address = 0x55,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -555,6 +559,16 @@
fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
break;
+ case CX23885_BOARD_TEVII_S470:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &tevii_cx24116_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index b4f2323..01856fb 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -68,6 +68,7 @@
#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F 13
#define CX23885_BOARD_TBS_6920 14
+#define CX23885_BOARD_TEVII_S470 15
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\